Scribd
Upload
9 views9 pages

Typical DMX Wirring Layout

Uploaded by

nishendupan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views9 pages

Typical DMX Wirring Layout

Uploaded by

nishendupan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Dynamic Façade Lighting

Typical Schematic Details

Date: 29.11.2023
Ver. -0 For Internal Reference Purposes
Typical Schematic DMX512 CONTROLLER
CH1 CH2

SPLITTER ( 8 OUTPUT )

DMX 512 Light Junction box

240 V AC
Power 240V AC

Amplifier(Put a signal amplifier


Amplifier(Put a signal amplifier
for every 30 meters/30Fixtures)
for every 30 meters/30Fixtures)

240 V AC
Power 240V AC
Same connection

Same connection

Same connection

Same connection

Same connection

Same connection
Amplifier(After 30Mtr/30 Fixtures)

And so on ….
And so on ….
Typical Schematic
Product Wise

Havells Havells
Supply Cable(1Mtr.) Extension Cable(1/3Mtr.)
Typical Schematic
Product Wise
Typical Schematic
Product Wise
Third Party Items -

DMX CONTROLLER details

Supply Will come from Stablizer in to a IP ratedbox or room where the DMX controller will kept, A board with 5 pin plug
socket and switch required in the box for adopter plug in

DMX Splitter ( all Dimension in mm)

A board with 5 pin plug socket and switch required in the box for adopter plug in
Third Party Items - Xlr 3 pin Male & Female connector

Female Male

Cable connector for conduit selection

M16 connector with cables

M15 connector with cables


Third Party Items -

DMX cables
THANK YOU

You might also like