GPS Active Antenna GPS Active Antenna GPS Active Antenna GPS Active Antenna
GPS Active Antenna GPS Active Antenna GPS Active Antenna GPS Active Antenna
Applications
• Car GPS Systems
• Hand held GPS Systems
Description
A compact Antenna for GPS applications where high performance is required from a
small size. The antenna includes a Low Noise Amplifier and incorporates both mag-
netic mount and screw fixings.
Part Numbers
ANT-
ANT-GPSMG Active GPS with cable and connector 5metres SMA (M)
R F Solutions Ltd.,
Unit 21, Cliffe Industrial Estate,
Lewes, E. Sussex. BN8 6JL. England.
Email : [email protected] http://www.rfsolutions.co.uk
Tel: +44 (0)1273 898 000 Fax: +44 (0)1273 480 661
Test Data
GENERAL
3.1 ENVIRONMENTAL CONDITIONS
3.1.1 OPERATING TEMPERATURE -40 C TO +85 C
3.1.2 STORAGE TEMPERATURE -40 C TO +90 C (110 C MAX 1HR.)
3.1.3 RELATIVE HUMIDITY 20% TO 95%, rain
3.2 ELECTRICAL SPECIFICATIONS
3.2.1 INPUT VOLTAGE Require: 2.5 to 5.5 VDC
3.2.2 POWER CONSUMPTION 10~25 mA
3.2.3 OUTPUT CONNECTOR SMA male
3.2.4 CABLE Shikoku Cable RG174U
Loss at 1575 MHz < 1.32 dB per meter
3.3 MECHANICAL SPECIFICATIONS
3.3.1 MOUNTING Magnetic Mount
3.3.2 PULLING FORCE OF MAGNET 29.4N Min.
3.3.3 WATER PROOF Waterproof (JISD0203 S2)
3.3.4 SHOCK 50G : Vertical Axis
30G : All Axis
3.3.5 VIBRATION 10 through 200Hz. Log sweep 3.0G
(Sweep Time : 15 MIN.) 3 AXIS
3.3.6 MAGNET MOUNT Withstand speed of upto 180Km/h.
3.3.7 CABLE PULLING FORCE 49N MIN.
Before Visible or electrical damage appears
applying up to 49N pulling force between cable
and antenna as well as between cable and
connector.
3.3.8 BENDING TEST 1” radius After bending test 90 degree right and left
1,000 cycles, no permenant damage found.
3.3.9 ANTI-COROSION Based on JIS Z 2371, spray 5% saltwater at
35 C should not rust after 96Hrs,
3.3.10 Dimensions see mechanical drg
5.0 LNA
5.1 FREQUENCY RANGE (minimum) 1,575.42 + 1.1 MHz
5.2 GAIN 32dB +3 dB (+30 C)
32dB +4 dB (-40 C to +85 C)
5.3 NOISE FIGURE 1.8 dB MAX. (+30 C)
5.4 OUT OF BAND REJECTION fo =1,575.42 MHz
fo + 20MHz 7dB MIN.
fo + 30MHz 12dB MIN.
fo + 50MHz 20dB MIN.
fo + 100MHz 30dB MIN.
5.5 OUTPUT IMPEDANCE 50ohm
5.6 OUTPUT VSWR 2.0:1 MAX.