Datasheet

Huawei CloudEngine 6865

Switch Datasheet
Huawei CloudEngine 6865 series switches have advanced
hardware architecture with 100GE uplink ports and high-
density 25GE access ports.

www.huawei.com
Product Overview
Huawei CloudEngine 6865 series switches are next-generation 25GE Ethernet switches designed for data centers and high-end
campus networks, providing high-performance, high-density 25GE ports, and low latency. The CloudEngine 6865 series have
advanced hardware architecture with 100GE uplink ports and high-density 25GE access ports.

Using the Huawei VRP8 software platform, CloudEngine 6865 series provide extensive data center service features and high
stacking capability. In addition, the airflow direction (front-to-back or back-to-front) can be changed. CloudEngine 6865 series
can work with CloudEngine 16800 or CloudEngine 12800 switches to build an elastic, virtualized, high-quality 100GE fully-
connected fabric that meets the requirements of cloud-computing data centers.

CloudEngine 6865 series provide high-density 10GE/25GE access to help enterprises and carriers build a scalable data center
network platform in the cloud computing era. They can also be used as aggregation or core switches for enterprise campus
networks.

Product Appearance
The CloudEngine 6865-48S8CQ-EI switches provide 48x25GE SFP28 ports and 8x100GE QSFP28 ports.

Product Characteristics
High-Density 25GE Access
 CloudEngine 6865 series (1 U) provide 2000Mpps forwarding performance and supports L2/L3 line-rate forwarding.
 CloudEngine 6865 series provide up to 48*25GE ports, allowing for high density 10G/25G server access and smooth
evolution.
 CloudEngine 6865 series provide eight 100GE QSFP28 ports. Each QSFP28 port can be used as one 40GE QSFP+ port,
four 25GE SFP28 ports, or four 10GE SFP+ ports, providing flexibility in networking. The 100GE uplink ports can be connected
to CloudEngine 16800 or CloudEngine 12800 switches to build a non-blocking network platform.

Inter-device Link Aggregation, High Efficiency and Reliability

 CloudEngine 6865 series support multichassis link aggregation group (M-LAG), which enables links of multiple switches to
aggregate into one to implement device-level link backup.
 Switches in an M-LAG system all work in active state to share traffic and back up each other, enhancing system reliability.
 Switches in an M-LAG system can be upgraded independently. During the upgrade, other switches in the system take over
traffic forwarding to ensure uninterrupted services.
 M-LAG supports dual-homing to Ethernet, VXLAN, and IP networks, allowing for flexible networking.
 With comprehensive inter-device link aggregation technology, the device networking coupling relationship evolves from
stacking at the control plane to the use of M-LAG and then finally to coupling-free M-LAG Lite. This achieves active-active
server access and zero interruption of services when upgrading switches.

Hardware Overlay Gateway Achieves Fast Service Deployment

 CloudEngine 6865 series can work with a mainstream virtualization platform. As the high-performance, hardware gateway
of an overlay network (VXLAN), CloudEngine 6865 series can support more than 16 million tenants.
 The hardware gateway deployment enables fast service deployment without changing the customer network, providing
investment protection.

Huawei CloudEngine 6865 Switch Datasheet 2

 CloudEngine 6865 series support Border Gateway Protocol - Ethernet VPN (BGP-EVPN), which can run as the VXLAN
control plane to simplify VXLAN configuration within and between data centers.

Hardware Overlay Gateway Achieves Fast Service Deployment

 CloudEngine 6865 series can work with a mainstream virtualization platform. As the high-performance, hardware gateway
of an overlay network (VXLAN), CloudEngine 6865 series can support more than 16 million tenants.
 The hardware gateway deployment enables fast service deployment without changing the customer network, providing
investment protection.
 CloudEngine 6865 series support Border Gateway Protocol - Ethernet VPN (BGP-EVPN), which can run as the VXLAN
control plane to simplify VXLAN configuration within and between data centers.

Converged Enhanced Ethernet, Allowing for Data, Storage, and Computing Traffic on
One Network
 Various CloudEngine 6865 switches support multiple data center features: Priority-based Flow Control (PFC), Enhanced
Transmission Selection (ETS) and Data Center Bridging Exchange (DCBX). These features ensure low latency and zero packet
loss for FC storage and high-speed computing services.

Full Openness and Programmability, Flexible Customization

 CloudEngine 6865 series use the Open Programmability System (OPS) embedded in the VRP8 software platform to
provide programmability at the control plane.
 The OPS provides open APIs. APIs can be integrated with mainstream cloud platforms (including commercial and open
cloud platforms) and third-party controllers. The OPS enables services to be flexibly customized and provides automatic
management.
 Users or third-party developers can use open APIs to develop and deploy specialized network management policies to
implement extension of fast service functions, automatic deployment, and intelligent management. The OPS also implements
automatic operation and maintenance, and reduces management costs.
 CloudEngine 6865 series support CE modules for Ansible, which enables unified provisioning of physical and virtual
networks.
 The OPS provides seamless integration of data center service and network in addition to a service-oriented, software-
defined networking (SDN).

ZTP, Implementing Automatic O&M

 CloudEngine 6865 series support Zero Touch Provisioning (ZTP). ZTP enables CloudEngine 6865 series to automatically
obtain and load version files from a USB flash drive or file server, freeing network engineers from onsite configuration or
deployment. ZTP reduces labor costs and improves device deployment efficiency.
 ZTP provides built-in scripts for users through open APIs. Data center personnel can use the programming language they
are familiar with, such as Python, to provide unified configuration of network devices.
 ZTP decouples configuration time of new devices from device quantity and area distribution, which improves service
provisioning efficiency.

Intelligent Lossless DCN, Improving Reliability of High-Performance Computing

Automatic buffer configuration, eliminating packet loss

 The packet buffer of the forwarding chip is automatically configured at boot time.
 The threshold for the buffer of the forwarding chip is configurable, ensuring the optimal application performance for specific
network topologies and traffic models.

Dynamic traffic priority adjustment

 The scheduling priority of latency-sensitive microflows can be dynamically adjusted to preferentially schedule them,
guaranteeing the performance of latency-sensitive applications.

Traffic congestion control

 Dynamic ECN is supported. When any packet leaves a queue, the ECN flag is set according to the congestion status of
the queue. This shortens the delay caused by the queue depth.

Huawei CloudEngine 6865 Switch Datasheet 3

 Fast CNP is supported. A switch directly sends the CNP to the NIC of the source server, shortening the CNP feedback
path.
 The dynamic ECN threshold is supported. The ECN threshold can be dynamically adjusted for a queue according to traffic
changes.

Dynamic load balancing (DLB)

 The ECMP and LAG support the DLB function.

Monitoring prioritized lossless traffic under control

 The PFC can be mapped based on DSCP.

RoCE flow visibility

 Analyze RoCE flow KPIs, including the flow path, RTT, throughput, packet loss rate, abnormal sessions, and top sessions,
and display the RoCE network topology of each node and ECN thresholds of Huawei AI Fabric. In this way, more proper
network parameters can be configured and network faults can be quickly located, improving configuration and O&M efficiency.

FabricInsight-based Intelligent O&M

 The CloudEngine 6865 provides telemetry technology to collect device data in real time and send the data to Huawei data
center network analyzer iMaster NCE-FabricInsight. iMaster NCE-FabricInsight analyzes network data based on the intelligent
fault identification algorithm, accurately displays the real-time network status, effectively demarcates and locates faults in a
timely manner, and identifies network problems that affect user experience, accurately guaranteeing user experience.

iMaster NCE-based Simplified Network Deployment

 CloudEngine 6865 series switches can interconnect with iMaster NCE-Fabric through standard protocols such as
NETCONF and SNMP to implement network automatic management and control, providing more efficient and intelligent
operation methods, simplifying network management, and reducing the OPEX.

Flexible Airflow Design, High Energy Efficiency

Flexible front-to-back/back-to-front airflow design

 CloudEngine 6865 series use a strict front-to-back/back-to-front airflow design that isolates cold air channels from hot air
channels. This design improves heat dissipation efficiency and meets design requirements of data center equipment rooms.
 Air can flow from front to back or back to front depending on the fans and power modules that are used.
 Redundant power modules and fans can be configured to ensure service continuity.

Innovative energy-saving technologies

 CloudEngine 6865 series have innovative energy-saving chips and can measure system power consumption in real time.
The fan speed can be adjusted dynamically based on system consumption. These energy-saving technologies reduce O&M
costs and contribute to a greener data center.

Clear Indicators, Simplifying Maintenance

Clear indicators

 Port indicators clearly show the port status and port rate. The 40GE port indicators can show the states of all ports derived
from the 40GE ports.
 State and stack indicators on both the front and rear panels enable users to maintain the switch from either side.
 CloudEngine 6865 series support remote positioning. Remote positioning indicators enable users to easily identify the
switches they want to maintain in an equipment room full of devices.

Simple maintenance

 The management port, fans, and power modules are on the front panel, which facilitates device maintenance.
 Data ports are located at the rear, facing servers. This simplifies cabling.

Huawei CloudEngine 6865 Switch Datasheet 4

Licensing
CloudEngine 6865 supports both the traditional feature based licensing mode and the latest Huawei IDN One Software (N1
Huawei IDN One Software (N1 mode for short) licensing mode. The CloudFabric N1 business model combines the NCE
controller, analyzer, and CloudEngine switch software for use in a range of common scenarios. This simplifies transactions,
provides customers with more functions and value, and protects their software investment with Software License Portability.

Product Feature N1 Mandatory Software Packages N1 Add-on Software

Packages

CloudEngine 6865 Foundation Advanced Premium AI Fabric Multi-cloud

series switch Function Multi-DC
Package Value-added
Package

Basic software √ √ √

IPv6 √ √ √

VXLAN √ √ √

Lossless upgrade √ √ √

Telemetry √ √ √

PTP √ √ √

MPLS √ √

LLETH √

iMaster NCE-Fabric SDN automation √ √ √

controller
Basic intent √
functions
(simulation and
verification, and
network-wide
configuration
rollback)

Multi-cloud multi- √
DC function

iMaster NCE- Basic network √ √ √

FabricInsight analysis functions
analyzer of telemetry

Network health √ √
("1-3-5" intelligent
O&M)

Value-added √
functions for
network traffic
analysis
(managing 100
VMs)

Version mapping Select one from three options. The Advanced It is used It is used with
software package contains functions of the with the the
Foundation software package, and the Foundation, Foundation,
Premium software package contains functions Advanced, Advanced, or
of the Advanced software package. or Premium Premium
software software

Huawei CloudEngine 6865 Switch Datasheet 5

 Product Feature N1 Mandatory Software Packages N1 Add-on Software
Packages
package. package.

For details about product function differences, refer to the product documentation.

Note: For detailed information of Huawei CloudFabric N1 business model, visit

https://e.huawei.com/en/material/networking/dcswitch/03a0e69bfa2c4f168323ba94a75f1f09.

Product Specifications
Note: This content is applicable only to regions outside mainland China. Huawei reserves the right to interpret this content.

Functions and Features

Item CloudEngine 6865-48S8CQ-EI

Device virtualization iStack

M-LAG

Network virtualization QinQ access VXLAN

VXLAN routing and bridging

BGP-EVPN

Data center VXLAN mapping, implementing interconnection between multiple DCI networks at Layer 2
interconnect

SDN iMaster NCE-Fabric

VMware NSX (supported by CloudEngine 6865-48S8CQ-EI)

Network DCBX, PFC, ETS

convergence
RDMA and RoCE (RoCEv1 and RoCEv2)

Programmability OPS

Ansible-based automatic configuration and open-source module release

Traffic analysis NetStream

sFlow

VLAN Adding access, trunk, and hybrid interfaces to VLANs

Default VLAN

QinQ

MUX VLAN

GVRP

MAC address table Dynamic learning and aging of MAC address entries

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

MAC address limiting based on ports and VLANs

IP routing IPv4 routing protocols, such as RIP, OSPF, IS-IS, and BGP

Huawei CloudEngine 6865 Switch Datasheet 6

Item CloudEngine 6865-48S8CQ-EI

IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+

IPv6 IPv6 Neighbor Discovery (ND)

IPv6 VXLAN over IPv4

Path MTU Discovery (PMTU)

TCP6, IPv6 ping, IPv6 tracert, IPv6 socket, UDP6, and raw IPv6

Multicast Multicast routing protocols such as IGMP, PIM-SM, PIM-DM, MSDP, and MBGP

IGMP snooping

IGMP proxy

Fast leaving of multicast member interfaces

Multicast traffic suppression

Multicast VLAN

Multicast over VXLAN

Reliability Link Aggregation Control Protocol (LACP)

STP, RSTP, VBST, and MSTP

BPDU protection, root protection, and loop prevention

Smart Link and multi-instance

Device Link Detection Protocol (DLDP)

ERPS (G.8032)

VRRP, VRRP load balancing, and BFD for VRRP

BFD for BGP/IS-IS/OSPF/Static route

BFD for VXLAN

QoS Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p
information

ACL, CAR, re-marking, and scheduling

Queue scheduling algorithms, including PQ, WRR, DRR, PQ+WRR, and PQ+DRR

Congestion avoidance mechanisms, including WRED and tail drop

Traffic shaping

O&M Network-wide path detection

IEEE 1588v2

Telemetry

ERSPAN+

Statistics on the buffer microburst status

VXLAN OAM: VXLAN ping and VXLAN tracert

Intelligent and VIQ

Lossless DCN
Dynamic ECN

Huawei CloudEngine 6865 Switch Datasheet 7

Item CloudEngine 6865-48S8CQ-EI

Fast CNP

Dynamic load balancing (DLB)

RoCE flow visibility

Configuration and Console, Telnet, and SSH terminals

maintenance
Network management protocols, such as SNMPv1/v2/v3

File upload and download through FTP and TFTP

BootROM upgrade and remote upgrade

802.3az Energy Efficient Ethernet (EEE)

Hot patches

User operation logs

Zero Touch Provisioning (ZTP)

Security and Command line authority control based on user levels, preventing unauthorized users from using
management commands

Defense against DoS address attacks, ARP storms, and ICMP attacks

Port isolation, port security, and sticky MAC

Binding of the IP address, MAC address, port number, and VLAN ID

Authentication methods, including AAA, RADIUS, and HWTACACS

Remote Network Monitoring (RMON)

Performance and Scalability

Item CloudEngine 6865-48S8CQ-EI

Maximum number of MAC address entries 288K

Maximum number of routes (FIB IPv4/IPv6) 380K/256K

ARP size 168K

Maximum number of VRFs 4096

IPv6 ND table size 64K

Maximum number of multicast routes (multicast FIB 8K/2K

IPv4/IPv6)

Maximum number of VRRP groups 1000

Maximum number of ECMP paths 128

Maximum number of ACLs Ingress: 7662

Egress: 2000

Maximum number of broadcast domains 16K

Maximum number of BDIF interfaces 12K

Maximum number of virtual tunnel endpoints (VTEPs) 2K

Maximum number of LAGs 1024/512/256/128/64

Huawei CloudEngine 6865 Switch Datasheet 8

 Item CloudEngine 6865-48S8CQ-EI

Maximum number of links in a LAG 2/4/8/16/32

Maximum number of MSTIs 64

Maximum number of VLANs where VBST can be 500

configured

Maximum number of PTP slaves 56

Note: This specification may vary between different scenarios. Contact Huawei for details.

Hardware Specifications
Item CloudEngine 6865-48S8CQ-EI

Physical features Dimensions (W x D x H) 442 mm x 420 mm x 43.6 mm

Weight (excluding optical 6.2/8.8

transceivers, power
modules, and fan
assemblies/including AC
power modules and fan
assemblies, excluding
optical transceivers, kg)

Switching capacity (Tbps) 4

Forwarding performance 2000

(Mpps)

10/25GE SFP28 ports 48

100GE QSFP28 ports 8

Management interface Out-of-band management 1*GE management interface

port

Console port 1*RJ45 interface

USB port 1

CPU Main frequency (GHz) 1.5

Number of cores 8

Storage RAM 4GB

NOR Flash 32MB

NAND Flash 2GB

System System buffer 32MB

Power supply system Power modules 600 W AC/600 W -48 V DC

Rated voltage range (V) 100 V to 240 V AC

–48 V to –60 V DC

Maximum voltage range 90 V to 290 V AC

(V) –38.4 V to –72 V DC

Maximum input current 60 W AC power module: 100 V to 240 V 9A

600 W DC power module: – 48 V to – 60 V DC 20A

Huawei CloudEngine 6865 Switch Datasheet 9

 Item CloudEngine 6865-48S8CQ-EI

Typical power 265 W (100% traffic load, copper cable, normal temperature, dual
power modules)
327 W (100% traffic load, short-distance optical transceivers,
normal temperature, dual power modules)

Maximum power 420 W

Frequency (AC, Hz) 50/60

Heat dissipation Heat dissipation mode Air cooling

Number of fans 2

Heat dissipation airflow Front-to-back or back-to-front airflow

Maximum heat 1604

consumption (BTU/hr)

Environment Long-term operating 0°C to 40°C (0-1800 m)

specifications temperature (°C) The temperature decreases by 1°C each time the altitude increases
by 220 m.

Storage temperature (°C) -40°C to +70°C

Relative humidity 5% to 95%

Operating altitude (m) Up to 5000

Sound power at 27°C Front-to-back airflow: < 65 dBA

(dBA) Back-to-front airflow: < 65 dBA

Sound power at 40°C Front-to-back airflow: < 83 dBA

(dBA) Back-to-front airflow: < 81 dBA

Sound pressure at 27°C Front-to-back airflow: 51 dBA in average (maximum: 53 dBA)

(dBA) Back-to-front airflow: 51 dBA in average (maximum: 55 dBA)

Surge protection AC power supply protection: 6 kV in common mode and 6 kV in

differential mode
DC power supply protection: 2 kV in common mode and 1 kV in
differential mode

Reliability MTBF (year) 38.85

MTTR (hour) 1.48

Availability 0.999997178

Note: For detailed information of CloudEngine 6865 platform hardware information, visit

https://support.huawei.com/enterprise/en/doc/EDOC1000019246?idPath=7919710%7C21782165%7C21782239%7C22318540
%7C7597815.

Safety and Regulatory Compliance

The following table lists the safety and regulatory compliance of CloudEngine switches.

Certification Category Description

Safety  EN 60950-1
 EN 60825-1
 EN 60825-2

Huawei CloudEngine 6865 Switch Datasheet 10

 Certification Category Description
 UL 60950-1
 CSA-C22.2 No. 60950-1
 IEC 60950-1
 AS/NZS 60950-1
 GB4943

Electromagnetic Compatibility  EN 300386

(EMC)  EN 55032: CLASS A
 EN 55024
 IEC/EN 61000-3-2
 IEC/EN 61000-3-3
 FCC 47CFR Part15 CLASS A
 ICES-003: CLASS A
 CISPR 32: CLASS A
 CISPR 24
 AS/NZS CISPR32
 VCCI- CISPR32: CLASS A
 GB9254 CLASS A

Environment  2011/65/EU EN 50581

 2012/19/EU EN 50419
 (EC) No.1907/2006
 GB/T 26572
 ETSI EN 300 019-1-1
 ETSI EN 300 019-1-2
 ETSI EN 300 019-1-3
 ETSI EN 300 753 GR63

Note

EMC: electromagnetic compatibility

CISPR: International Special Committee on Radio Interference

EN: European Standard

ETSI: European Telecommunications Standards Institute

CFR: Code of Federal Regulations

FCC: Federal Communication Commission

IEC: International Electrotechnical Commission

AS/NZS: Australian/New Zealand Standard

VCCI: Voluntary Control Council for Interference

UL: Underwriters Laboratories

CSA: Canadian Standards Association

Supported MIBs
For details about the MIB information, visit
https://support.huawei.com/hedex/hdx.do?docid=EDOC1100101219&lang=en&idPath=24030814%7C21782165%7C21782239
%7C22318540%7C7597815.

Huawei CloudEngine 6865 Switch Datasheet 11

Optical Transceivers and Cable
For details about the optical transceivers and cables information, visit
https://e.huawei.com/en/material/networking/dcswitch/f6d91cf16df0474998087676a33fd41e.

Ordering Information
Mainframe

CE6865-48S8CQ-EI CE6865-48S8CQ-EI Switch (48-Port 25GE SFP28,8*100GE QSFP28, Without Fan and Power
Module)

CE6865-EI-F-B0B CE6865-48S8CQ-EI Switch (48-Port 25GE SFP28,8*100GE QSFP28,2*AC Power Module,

2*FAN Box, Port-side Exhaust)

CE6865-EI-B-B0B CE6865-48S8CQ-EI Switch (48-Port 25GE SFP28,8*100GE QSFP28,2*AC Power Module,

2*FAN Box, Port-side Intake)

Fan Tray

Model Description Applicable Product

FAN-40HA-F Fan box (HA, Front to Back, FAN CE6865-48S8CQ-EI

panel side intake)

FAN-40HA-B Fan box (HA, Back to Front, FAN CE6865-48S8CQ-EI

panel side exhaust)

Power

Model Description Applicable Product

PAC-600WA-F 600W AC Power Module (Front to Back, Power CE6865-48S8CQ-EI

panel side intake)

PAC-600WA-B 600W AC Power Module (Back to Front, Power CE6865-48S8CQ-EI

panel side exhaust)

PDC-350WA-F 350W DC Power Module (Front to Back, Power CE6865-48S8CQ-EI

panel side intake)

PDC-350WA-B 350W DC Power Module (Back to Front, Power CE6865-48S8CQ-EI

panel side exhaust)

PDC600S12-CF 600W DC Power Module (Front to Back, Power CE6865-48S8CQ-EI

panel side intake)

PDC600S12-CB 600W DC Power Module (Back to Front, Power CE6865-48S8CQ-EI

panel side exhaust)

Software

CE68-LIC-BUN01 CE6800 Function License Bundle 1

CE68-LIC-TLM CE6800 Telemetry Function

CE68-LIC-PTP CE6800 Precision Time Protocol Function

CE68-LIC-AIF CloudEngine 6800 AI Fabric Function

CE68-LIC-PTP CE6800 Precision Time Protocol Function

Huawei CloudEngine 6865 Switch Datasheet 12

 Software

N1-CE68LIC-CFFD N1-CloudFabric Foundation SW License for CloudEngine 6800

N1-CE68CFFD-SnS1Y N1-CloudFabric Foundation SW License for CloudEngine 6800-SnS- Year

N1-CE68LIC-CFAD N1-CloudFabric Advanced SW License for CloudEngine 6800

N1-CE68CFAD-SnS1Y N1-CloudFabric Advanced SW License for CloudEngine 6800-SnS- Year

N1-CE68LIC-CFPM N1-CloudFabric Premium SW License for CloudEngine 6800

N1-CE68CFPM-SnS1Y N1-CloudFabric Premium SW License for CloudEngine 6800 -SnS-Year

N1-CE68LIC-AIF N1-CloudEngine 6800 AI Fabric Function

N1-CE68AIF- SnS1Y N1-CloudEngine 6800 AI Fabric Function-SnS- Year

N1-CE-F-LIC-MDCA N1-CloudEngine Data Center Switch Multi-cloud Multi-DC Value-added Package - Fixed

N1-CEFMDCA -SnS1Y N1-CloudEngine Data Center Switch Multi-cloud Multi-DC Value-added Package, Per Fixed device
-SnS-Year

Networking and Application

Data Center Applications
On a typical data center network, CloudEngine 16800/CloudEngine 12800/CloudEngine 8800 switches work as core switches,
and CloudEngine 6865 switches work as ToR switches. CloudEngine 6865 switches use 100GE ports to set up 100GE full
connections with CloudEngine 16800/CloudEngine 12800/CloudEngine 8800 core switches. The core and ToR switches use
fabric technology such as VXLAN to establish a non-blocking large Layer 2 network, which allows large-scale VM migrations
and flexible service deployments.

Note: VXLAN can also be used on campus networks to support flexible service deployment in different service areas.

Huawei CloudEngine 6865 Switch Datasheet 13

 Copyright © Huawei Technologies Co., Ltd. 2022. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of
Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or
part of the products, services and features described in this document may not be within the purchase scope or the usage
scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are
provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not
constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base Bantian, Longgang

Shenzhen 518129
People's Republic of China

Website: www.huawei.com

Huawei CloudEngine 6865 Switch Datasheet 14