Review

www.advmat.de

Flexible and Stretchable Capacitive Sensors

with Different Microstructures
Jing Qin, Li-Juan Yin, Ya-Nan Hao,* Shao-Long Zhong, Dong-Li Zhang, Ke Bi,
Yong-Xin Zhang, Yu Zhao, and Zhi-Min Dang*

exhibits characteristics such as a low mod-

Recently, sensors that can imitate human skin have received extensive ulus, high toughness, and high tear resist-
attention. Capacitive sensors have a simple structure, low loss, no tempera- ance.[3,4] The powerful sensing system of
ture drift, and other excellent properties, and can be applied in the fields of the skin can help the human body sense
robotics, human–machine interactions, medical care, and health monitoring. pressure, deformation, temperature,
humidity, and other stimuli, and transmit
Polymer matrices are commonly employed in flexible capacitive sensors
these changes to the brain in the form of
because of their high flexibility. However, their volume is almost unchanged different electrical signals.[5,6] The human
when pressure is applied, and they are inherently viscoelastic. These short- body relies on these sensory inputs from
comings severely lead to high hysteresis and limit the improvement in the skin and the proprioception of mus-
sensitivity. Therefore, considerable efforts have been applied to improve the cles, tendons, joints, and other motor
organs in different states to maintain
sensing performance by designing different microstructures of materials.
normal posture and complete the basic
Herein, two types of sensors based on the applied forces are discussed, activities of daily life.[7,8] Electronic skin
including pressure sensors and strain sensors. Currently, five types of micro- (E-skin) is a flexible electronic device that
structures are commonly used in pressure sensors, while four are used in simulates the human skin sensing mecha-
strain sensors. The advantages, disadvantages, and practical values of the nism by converting physiological signals
different structures are systematically elaborated. Finally, future perspec- into electronic signals (Figure 1).[6,9–12]
Compared with traditional rigid electronic
tives of microstructures for capacitive sensors are discussed, with the aim of
devices, flexible and stretchable E-skin
providing a guide for designing advanced flexible and stretchable capacitive has significant practical value in human–
sensors via ingenious human-made microstructures. machine interactions, Internet of Things
(IoT), and other application fields.[10,13,14]
With the rapid development of technolo-
gies such as artificial intelligence and soft robots, requirements
1. Introduction
for materials used in human–machine interfaces have also
As the largest organ in the human body, the skin plays an gradually increased. These materials must imitate the mechan-
important role in daily life.[1,2] Based on the collaboration of ical properties of human skin tissues, establish information
the two main components, collagen and elastin fibers, the skin transmission networks, interact intelligently with the external
environment, and be capable of sensing multiple stimuli and
J. Qin, L.-J. Yin, Dr. S.-L. Zhong, Dr. D.-L. Zhang, Y.-X. Zhang,
can greatly promote the development of sensors.[2,15–17]
Prof. Z.-M. Dang According to the operating mechanism, sensors can be
State Key Laboratory of Power System divided into three categories: piezoelectric, resistive, and capaci-
Department of Electrical Engineering tive.[18,19] The advantages and disadvantages of these common
Tsinghua University sensors types are compared in Table 1. Parameters such as the
Beijing 100084, China
E-mail: [email protected] length and distance between the dipoles in the piezoelectric
J. Qin, Prof. Y.-N. Hao, Prof. K. Bi sensor change with the applied force, resulting in an increase
State Key Laboratory of Information Photonics in the charge and voltage.[20–23] Therefore, piezoelectric sensors
and Optical Communications require no additional power supply. They have a high sensitivity
School of Science and a fast response speed to dynamic pressure. However, they
Beijing University of Posts and Telecommunications
Beijing 100876, China
cannot detect static loads and can drift over time in a sensor
E-mail: [email protected] response with erratic reliability.[24,25] According to the resistance
Dr. Y. Zhao calculation formula R = ρ L , where ρ is the resistivity, L is the
School of Electrical Engineering S
length, and S is the cross-sectional area, and the force applied
Zheng Zhou University
Zhengzhou, Henan 450001, China changes in the material’s geometry, namely, L and S when ρ is
The ORCID identification number(s) for the author(s) of this article
unchanged, thus changing the material’s resistance R.[26] Resis-
can be found under https://doi.org/10.1002/adma.202008267. tive sensors are easy to manufacture at low cost, which are cur-
rently the most studied sensors.[27,28] However, the resistivity of
DOI: 10.1002/adma.202008267 various materials generally varies with temperature,[29,30] which

Adv. Mater. 2021, 33, 2008267 2008267 (1 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

In the past few decades, various methods for fabricating flex-

ible capacitive sensors have been proposed. The early prepara-
tion methods of capacitive sensors are mostly based on micro-
electromechanical system (MEMS) technology.[54] However,
semiconductor-based devices have poor mechanical properties,
are hard and brittle, and cannot withstand large deformations.
Therefore, to replace silicon-based materials, various polymer-
based materials, such as polydimethylsiloxane (PDMS),[44,55–63]
Ecoflex,[31,51,64–71] and polyurethane (PU),[66,72–76] have been
Figure 1. Schematic illustration of signal conversion in human feedback proposed and widely used as flexible substrates for capacitive
system and E-skin. sensors. These polymers have a low Young’s modulus and a
high degree of stretchability.[77–79] In addition to good elasticity
makes them easily affected by temperature or humidity changes and toughness, chemical stability, and transparency, they also
in the external environment.[31,32] Resistive sensors may also be have desirable biocompatibility[36,80] and electrical insulation.[74]
affected by environmental factors or via contact with the human However, the unchanged volume of the polymer dielectric layer
body (e.g., sweat and body fluids) when applied in a wearable limits the improvement in sensitivity.[37,39] Most polymer elas-
system, causing drift and deteriorating the stability and reli- tomers have severe viscoelasticity and interfacial adhesion,[55,81]
ability of data output.[33] If the fringing of the electric field is which increase the hysteresis and reduce the response speed
negligible, the capacitance of the plane-parallel capacitor can be of the device.[51,82] In practical applications, especially in bio-
expressed as C = k0 kr A , where k0 is the free-space permittivity, medicine, the response time affects the speed of signal collec-
d
kr is the relative permittivity of the dielectric material, A is the tion and processing.[40,41] High hysteresis may fail to accurately
area of the parallel electrodes, and d is the distance between the reflect the patients’ physical conditions in real time, which will
two parallel electrodes.[34] In comparison, the effect of temper- lead to a delay in treatment time.
ature and humidity on the dielectric constant is smaller than To solve this problem, numerous researchers have designed
that on the conductivity. Hence, this type of temperature drift different microstructures to achieve greater strain of the elas-
hardly occurs in capacitive sensors. When materials with a low- tomer, thereby enhancing the sensing range.[83] Both Guo and
temperature coefficient are selected as the electrodes of the co-workers and Zhang and co-workers used microstructured
capacitive sensors, their temperature coefficients are extremely PDMS as the dielectric layer, which proved that the distance
small and are almost unaffected by temperature.[32] In addition, and capacitance change of the sensor with microstructured
capacitive sensors have the advantages of simple device struc- PDMS are tens of times higher than those of sensors with
ture, low power consumption, low detection limit, wide applica- nonstructured PDMS.[55,84] The Young’s modulus, sensitivity,
tion range, fast dynamic response, and endurability,[35–41] which and stretchability can be improved by adding various artificially
have been extensively studied and applied in E-skin,[42,43] med- designed microstructures fabricated of different materials. Park
ical prosthetics,[44] wearable devices,[13,45] biometrics,[38,46] touch- et al. designed microstructures to expand the failure strain
pads and touch screens,[47–49] and other consumer electronics (from 240% to 400%), low modulus, and large ratio of capaci-
fields.[47,50–53] tance change (from 0.25 to 1.5).[56] The presence of air in the

Table 1. Comparison of the three common sensors.

Category Mechanism Advantages Disadvantages

Piezoelectric sensors Self-power ability Unable to static sensing
Simple structure Drift over time
High sensitivity to dynamic pressure Lower reliability
Fast response speed

Resistive sensors Low-cost Hysteresis effect

Simple fabrication techniques Temperature dependent
Most studied Humidity dependent

Capacitive sensors Simple structure Low sensitivity

Temperature independent Susceptible to environmental interference
Low power consumption
Low-pressure detection limit
Fast dynamic response

Adv. Mater. 2021, 33, 2008267 2008267 (2 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

microstructures enables the surface to elastically deform when where E is the compressive elastic modulus of the polymer,
pressure is applied, which can store and release energy revers- thus, Equation (1) can be rewritten as[90]
ibly, thereby greatly reducing the effect of the viscoelasticity of
the matrix and helping the sensors to recover quickly during A0 E 2
the load–release process.[36] Finite element analysis (FEA) of C = k0 k r (3)
d0 (E − p )
2

hyperelastic materials based on electromechanical coupling 

simulation also proves that the usage of microstructures is Similar results obtained by the simulation calculations from
essential for sensors to achieve high sensitivity.[51] Bao’s group also indicate that the low compression modulus of
Herein, two types of sensors—pressure sensors and strain the polymer film has a significant effect on the improvement
sensors—are discussed based on the application of external in capacitance change and sensitivity.[67,91] Therefore, ideal flex-
forces. First, we introduce five microstructures currently used ible sensors should be as soft as possible so that d will be sen-
in pressure sensors. We also compare and analyze the effects of sitive to external stimuli. Beker et al. reduced the amount of
different structures on improving the sensitivity, linearity, and curing agent in PDMS (50:1) to decrease the modulus of the
other performances (Section 2). Then, the four microstructures film, which has a higher capacitance change and higher sensi-
in the strain sensor are discussed, compared, and analyzed to tivity than a traditional PDMS film (10:1) under the same pres-
determine how different microstructures improve the stretch- sure.[91] As shown in Figure 2A, the slopes of the two tangents
ability of strain sensors and the practical application value of represent sensitivity S at points A and B, respectively, and the
strain sensors (Section 3). Finally, future development trends calculation equation is as follows[36]
and challenges associated with flexible and stretchable capaci-
tive sensors are proposed in this review (Section 4). δ ( ∆C / C0 ) (4)
S =
δp

2. Bendable Pressure Sensors where p is the applied load pressure, ΔC is the difference
between the sensor capacitance values before and after the pres-
Pressure sensing is one of the most important functions of sure applied, and C0 is the initial capacitance value. According
the human skin.[19] Diverse types of sensory receptors with dif- to Equation (4), when the capacitance ΔC is high under per unit
ferent sizes, shapes, quantities, and distributions exist on the load p, the sensitivity will increase.
human skin to realize various features of pressure perception For the sensor without a microstructure, capacitance is
in different parts of the skin.[11] For example, the skin on the mainly affected by the decrease in the distance between the
fingers and that on the body have different sensory fields and two electrodes because the flat contact surface has almost no
sensitivities. Physiological pressure changes may also reflect change with uniform stress distribution under external force.[57]
deterioration of body tissue due to diseases.[85] Through the Significant flexibility is observed in numerous current flexible
signal conversion of sensors, we can predict the underlying electronic devices by reducing the thickness d of the substrate;
diseases in the body in advance to control development of the however, such a method is not ideal for improving sensitivity.[10]
disease. To endow E-skin with the ability of pressure percep- Although pure polymer films are indeed much easier to bend,
tion, pressure sensors with different sensitivity and pressure the unchanged volume limits the improvement in sensitivity
ranges have been extensively studied to satisfy diverse applica- and pressure range.
tion scenarios. To promote sensitivity, Bao’s group first proposed the design
Generally, the performance of sensors is related to their of adding a microstructure to the pressure sensor in 2010.[36] By
capacitance and structure. If the fringing of the electric field is adding a small microstructure in the PDMS dielectric layer, the
negligible, the capacitance of the plane-parallel capacitor can be pressure sensitivity was increased by more than 30 times com-
expressed as[68,71,86–90] pared with an unstructured PDMS layer of the same size. There
are two main reasons for the significant increase in sensitivity:
A i) the presence of many voids in the microstructure film is con-
C = k0 k r (1)
d ducive to a smaller elastic modulus and can provide a larger
 deformation space under the applied pressure, which means
where k0(=8.85 × 10−12 F m−1) is the free space permittivity, kr is that the distance between two electrodes can change more to
the relative permittivity of the polymer dielectric, A is the area further increase ΔC under the same pressure;[36,41,78,94,95] ii) the
of the parallel electrodes, and d is the distance between the two dielectric constant of the polymer matrix (e.g., kPDMS ≈ 3.0) is
parallel electrodes. Because the Poisson’s ratio of the polymer higher than that of air (≈1).[36,62] When compression occurs, the
film is relatively large, the volume does not change when force air volume is occupied by the matrix, and ΔC increases accord-
is applied. When pressure p is applied, the capacitive sensor ingly.[62,96,97] Therefore, adding microstructures can signifi-
undergoes mechanical deformation, and the thickness d of cantly improve the sensitivity of the sensors.[98,99] In addition,
the dielectric layer can be calculated by the following formula the microstructure can also reduce the elastic modulus[100,101]
(when the deformation is less than 10%)[90] and viscoelasticity, which contributes to reducing the heat loss
caused by the resistance and mechanical loss due to the adhe-
sion between the polymer dielectric layer and the electrode
E (d − d0 ) (2) layer during the load/release process. Recent research reports
p=−
d0  have already confirmed that the microstructured or patterned

Adv. Mater. 2021, 33, 2008267 2008267 (3 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 2. A) Schematic illustration of sensitivity. B) Schematic process for the fabrication of microstructured PDMS films. C) The pressure responses
of the capacitive pressure sensors with different lengths of hemline of pyramids. D) The comparison of capacitance–pressure characteristics of the
sensors with different lengths. A–D) Reproduced under the terms of the CC-BY Creative Commons Attribution 4.0 International license (https://
creativecommons.org/licenses/by/4.0).[92] Copyright 2016, The Authors, published by Hindawi Publishing Corporation. E) Schematic of the differently
designed pyramid microstructures for bottom electrodes of the pressure sensor. Data: left-hysteresis, right-sensitivity. F) Illustration of the capacitive
pressure sensor based on a microstructured electrode. E,F) Adapted under the terms of the CC-BY Creative Commons Attribution 4.0 International
license (https://creativecommons.org/licenses/by/4.0).[51] Copyright 2020, The Authors, published by MDPI. G) Schematic illustration of the pressure-
sensing mechanism (contact area variable capacitive). H) Pressure–response curves for present and conventional pressure-sensing mechanism.
G,H) Adapted with permission.[93] Copyright 2018, Wiley-VCH.

Adv. Mater. 2021, 33, 2008267 2008267 (4 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

dielectric/electrode layer is an ideal and effective approach for means that the dielectric layer contains more air, which con-
strengthening sensor sensitivity.[102] tributes to a greater volume change and higher sensitivity at
lower pressure (Figure 2D).[92] Cheng et al. designed a hierar-
chical microstructured electrode with a combination of large
2.1. Micropyramid Structure and small pyramids to obtain high sensitivity (3.73 kPa−1) and
low hysteresis (4.42%) (Figure 2E).[106] The few large pyramids
In 2010, Bao’s group first developed a high-sensitivity capacitive improve the sensitivity, whereas the small pyramids reduce hys-
pressure sensor by assembling a dielectric layer with a micro- teresis due to interface adhesion. Nevertheless, such a sharp
structure.[36] A silicon wafer with an inverted pyramid structure and small structure will result in nonlinearity of the high-pres-
was used as the template. Liquid PDMS was poured into the sure range.[36,58,65,84,100,107–112] The sharply protruding part of
pyramid structure. After curing, the cured PDMS was separated the microstructure can be easily compressed under an external
from the mold to obtain a dielectric layer with a microstructure force; however, as the load increases, the deformability of the
(Figure 2B). Finally, indium tin oxide polyethylene terephtha- microstructure becomes poor and the equivalent elastic mod-
late (ITO-PET) was vapor-deposited as electrodes to prepare the ulus increases. The proportion of the flexible substrate in the
sensor. Because the microstructured dielectric layer is highly dielectric layer and the contact area between the opposite layer
compressible, the sensitivity of the sensor (maximum sensi- in the microstructured sensors tends to be saturated, leading
tivity: 0.55 kPa−1 in the range of 0.2 kPa) was 30 times higher to higher sensitivity in the low-pressure region accompanied
than that of unstructured sensors.[36] The advantage of the by nonlinearity in the high-pressure region. When the L/H
micropyramid structure is that the stress is not uniformly dis- ratio of the pyramid is ≈ 2 (the top angle of the pyramid is
tributed with stress concentrated at the tip of the pyramid.[103] 54.7°), the sensor can attain a balance between sensitivity and
The local stress concentration leads to large structural defor- linearity.[92,101,107]
mation and consequently high sensitivity.[104] Owing to its high Owing to the different thermal expansion coefficients of
sensitivity and easy tuning, the micropyramid structure has metal electrodes and polymer substrates, wrinkles and cracks
become the most widely studied and applied microstructure in are generated on the metal-film electrodes when deposited on
the field of capacitive pressure sensors. polymer films.[42,43] Li et al. solved this problem by bonding
Since then, many improved methods have been proposed PET with an ITO electrode on the PDMS film during the metal
for optimizing the parameters of micropyramids in the study evaporation process. PET substrates with a lower thermal
of microstructures. The sensitivity, sensing range, and other expansion coefficient and a higher Young’s modulus eliminated
related properties can be tuned by modifying the shape of the the thermal expansion of the PDMS structure (Figure 2F).[51]
micropyramids. The relationship curve between the sensitivity Although ITO-PET electrodes exhibit good electrical conduc-
and the PDMS pyramids at different spacings was simulated tivity and high light transmittance, the large elastic modulus
using numerous theoretical calculation models, which con- limits the compressibility and sensitivity of the sensor. Unlike
firmed that the pyramid interval was the main factor affecting the traditional mechanism of using the distance change
the capacitive sensor. The sensitivity increases with an increase between two electrodes to create a capacitance change, Bae
in spacing because sensors with a lower density of micropyra- et al. used the feature of the single-walled carbon nanotube
mids exhibit an increased fraction of air, resulting in a large (SWCNT)/PDMS mismatch to create micrometer-level wrinkles
compressibility with a lower Young’s modulus and conse- on the micropyramids under external pressure (Figure 2G).
quently high deformation.[101,103,105,106] However, the spacing The change in contact area between the microstructured layer
between adjacent cones affects the hysteresis of the response and the opposite layer affected the capacitance change; thus, a
time due to the interfacial adhesion of the polymer matrix.[106] linear relationship was observed in the dielectric layer as the
Capacitive pressure sensors with different sizes of the micro- pressure increased (Figure 2H).[93] However, this design cannot
structure were developed using the FEA method. When the be employed control the size and distribution uniformity of the
distance between two parallel electrodes is constant, the height micrometer-level wrinkles and cannot to be applied to mass
of the pyramid (H) is fixed. If the L/H ratio of the pyramid production.
decreases (where L is the bottom side length of the pyramid),
the angle of the pyramid top decreases and the structure of the
pyramid will become sharper. Accordingly, the proportion of the 2.2. Microneedle/Pillar Structure
air part increases, and the bendability of the device is improved.
Therefore, when the same pressure is applied, the mechanical If the L/H ratio of the micropyramid structure increases infi-
deformation of the pyramid increases (the spacing between nitely, a similar microneedle structure will be obtained. The tip
the two electrodes is shortened further), resulting in a larger area of the microneedle structure is smaller and the stress is
increase in capacitance and higher sensitivity. The results show more concentrated than that of the micropyramid structure,
that the smaller the L/H ratio of the pyramid is, the sharper and sensors with microneedles have large compressibility,
the pyramid is and the better the sensitivity will be.[92,101] This which can help achieve greater mechanical deformation under
can be explained by the stress distribution of the pyramid the same pressure.[101,113] The distance between the two elec-
(Figure 2C).[92] Furthermore, because the micropyramid-struc- trodes is smaller under pressure, resulting in a larger increase
tured dielectric layer with a smaller or larger L/H ratio behaves in capacitance and higher sensitivity (Figure 3A).[39,54,55,101,113]
more like an unstructured polymer matrix, the sharper pyramid For example, under the same pressure of 25 kPa, the incre-
structures produce less hysteresis.[107] Moreover, less polymer ment in capacitance of sensors with a single-sided micropillar

Adv. Mater. 2021, 33, 2008267 2008267 (5 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 3. A) Schematic illustration of the variations in the separation distance and the dielectric constant for different capacitive pressure sensors.
B) Relative capacitance variation of three sensors constructed by different microstructures. A,B) Reproduced with permission.[39] Copyright 2019,
American Chemical Society. C) Schematic illustration for the fabrication of MGDI-incorporated pressure sensor. The inset figure shows the MGDI
formation by changing magnitude and direction (angle) of Bcuring, higher magnetic field results in large size, less dense needles, and vice versa. Repro-
duced with permission.[113] Copyright 2020, Wiley-VCH. D) Geometrical change during the loading process and finite-element simulation showing the
local stress distribution and deformation of capacitive pressure sensor based on SGrE, NgrE, and MGrE. Reproduced with permission.[114] Copyright
2019, American Chemical Society. E) Schematic illustration of the microhairs array fabrication procedure. F) Photograph of an ant and SEM images of
its antenna composed of high aspect ratio slanted sensilla. Scale bars from left to right: 1 mm, 100 µm, and 10 µm. E,F) Adapted with permission.[115]
Copyright 2017, Wiley-VCH. G) Real-time monitoring of voice vibration during the pronunciations of the “sensor” and “pressure sensor.” H) Real-time
response measurement and relative capacitance change of the pressure sensor to the airflow. G,H) Adapted with permission.[116] Copyright 2019, Royal
Society of Chemistry.

structure was 70%, whereas that of sensors with a double-sided electrodes in an asymmetrical sandwich sensor; a high sensi-
micropillar structure was 150% because of the large distance tivity of 7.68 kPa−1 could be obtained in the two-layer MGrEs
variation Δd, which was nearly four times as high as that of (Figure 3D) because the roughness and compressibility of elec-
sensors without a microstructure (Figure 3B).[39] To achieve the trodes was improved, which is hundreds times higher than that
appropriate balance between precision, cost, and speed, Li’s of sensors with smooth graphene electrodes and ten times that
group designed a novel, large-area compatible, and mold-free of sensors with nanostructured graphene electrodes.[114] How-
technology that used a magnetically grown dielectric interface ever, when shear forces occur, the microneedle structure layer
(MGDI) to manufacture flexible pressure sensors with high- may slip to a certain extent with the relatively flat electrode
aspect-ratio microneedles by optimizing the concentration of layer, which can reduce the robustness of the sensor and limit
magnetic particles (MPs) and the vertical curing magnetic field its measurement range.
(Bcuring) intensity (Figure 3C).[113] In addition, graphene has Bionic cilia, a special microneedle structure, considerably
been widely employed to improve sensor sensitivity because of mimics small hair on the surface of human skin (Figure 3E).[115]
its excellent electrical properties in capacitance sensors with a Pang et al. designed a pressure sensor using microhair.[38] This
microneedle structure. Yang et al. designed layer microstruc- microhair-structured PDMS interface layer provided the skin
tured graphene electrodes (MGrEs) as the bottom and top with biocompatibility and enhanced the signal-to-noise ratio

Adv. Mater. 2021, 33, 2008267 2008267 (6 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

(SNR) of the sensor by changing the effective contact between integrating a microdome and hole, which could measure the
the sensor and the irregular surface of the epidermis. Hairy normal and shear force based on changes in the air gap and
structures in animals are more sensitive than the human epi- capacitance of the cells on sensing elements (Figure 4H).[122]
dermis, which helps them recognize the airflow and perceive However, the microdome structure may cause a sharp reduc-
the existence of other organisms in the external environment tion in sensitivity as the load increases. The microstructure
(Figure 3F).[115,117] Zhou et al. prepared a pressure sensor with layer will contact the corresponding electrode layer with the
cilia arrays imitating the human epidermis by embedding applied pressure, and the sharp tip of the pyramid has a small
AgNWs into PDMS, which could be used for speech recogni- contact area with the corresponding electrode; thus, the load
tion (Figure 3G) and airflow monitoring (Figure 3H), expanding change can be sensed in real time. In contrast, the semicircular
the application range of the sensor.[116] Although the output structure at the top of the microdome is relatively smooth. As
pressure capacitance curve of this device remains linear in the the contact area increases when a load is applied, the stress will
range of 0–12 kPa, the data showed nonlinearity in the range of evenly be distributed throughout the microstructure, rather
0–200 kPa. This feature is similar to the nonlinear mechanical than being concentrated on the sharp top like the micropyramid
behavior of human skin,[3] however, which is unfavorable to the structure, which leads to insensitivity of the sensor to pressure
deformation degree of the object, thereby limiting the applica- changes. As the load increases, the semicircular structure is
tion of sensors with microneedle structures. rapidly flattened (Figure 4I), which also reduces its deform-
ability and linear range. Therefore, the pressure response of the
sensor with microdomes is similar to that of a sensor without a
2.3. Microdome Structure microstructure.[124]

The microdome structure can endow the sensor with the ability
to distinguish between different forces. This hemispherical 2.4. Microporous Structure
structure can generate specific deformations according to the
type and direction of the applied force, which detects and dis- Natural multilayer porous structures are abundant in mush-
tinguishes various mechanical stimuli, including pressure, rooms, diatoms, and sponges (Figure 5A).[125] Such a large
shear, bending, and torsion.[118–120] Takahashi et al. simulated number of porous structures enable them to have a sufficient
the variation principle of capacitance change in a microdome elastic deformation space under external forces,[62] which can
sensor using a simplified flow model (Figure 4A).[121] It was provide a large pressure sensing range from several pascals
equipped with a novel capacitive force sensor with a polymer to tens of kilopascals.[94] The air trapped in the holes with a
dome structure containing silicone oil instead of fragile elec- closed-cell structure acts as a spring.[81] When an external force
trodes at the location of the applied force. When pressure was is applied, the thin columns between the two pores undergo
applied, the oil was pushed into the surrounding thin channel, buckling, and the critical buckling force is inversely propor-
and the changes in capacitance due to the inflowing dielectric tional to the length of the thin column.[126,127] Therefore, a large
oil were measured between the top and bottom electrodes of hole with a large deformation has a small compression mod-
the channel.[121] ulus, resulting in high sensitivity.[125,128] A device with a porous
Xiong et al. fabricated a microdome PDMS electrode layer dielectric structure has high compressibility, fast rebound
with a large deformation in both the distance between two speed, and a large linear pressure range.[124] Moreover, the
electrodes d and the changed contact area A (Figure 4B).[57] volume fraction of air in this porous structure is so high that
The experiment and FEA indicated that d and A synergisti- the sensor is ultralight[129] and causes almost no hindrance in
cally caused a significant increase in the capacitance, leading daily life activities. In addition, the porous structure has good
to an observable improvement in its sensitivity (30.2 kPa−1) permeability because of which the normal excretion functions
(Figure 4C).[57] Compared with the unstructured electrode of human skin (e.g., excretion of sweat and body fluids) are not
layers, the discontinuous microstructure has more concen- affected and the occurrence of allergies is reduced.[130] There-
trated stress under the same pressure conditions, resulting in a fore, polymer foams imitating natural structures have greater
larger stress concentration and mechanical deformation, even- mechanical deformability than bulk polymers, and can be
tually improving the sensitivity of the sensor.[57,74] Beccai’s group employed for heat insulation, vibration damping, and pressure
applied FEM to create a simplified model of a double-layer absorption in the automotive and construction industries.[131]
microdome structure to evaluate the deformation and stress dis- The manufacture of molds with microstructures is not suit-
tribution of different microdome shapes, which proved that the able for low-cost large-area production. For example, microp-
ability to distinguish normal and shear forces can be achieved yramids usually require complex photolithography, chemical
by adjusting various parameters (Figure 4D).[123] Boutry et al. etching,[38,134–136] and subsequent processes with multiple steps,
designed a hierarchically patterned, bioinspired E-skin by com- such as demolding. In contrast, the methods for preparing
bining micropyramids with microdomes (Figure 4E), which porous structures are usually simple; for example, pores left by
also proved that the microdome could detect the direction of sugar dissolved in water (Figure 5B);[52,71,137] by water volatilized
applied pressure (Figure 4F).[74] In addition, they fabricated new at a high temperature, which does not affect other materials
biomimetic E-skins with phyllotaxis spiral grids inspired from such as the polymer matrix (Figure 5C);[47,130] and by heating
botany to combine high sensitivity and a fast time response ammonium bicarbonate (NH4HCO3), the foaming agent
(Figure 4G).[74] Similar to this double-microstructured sensor, commonly used in the food industry, which produces carbon
Cheng et al. presented a polymer-based capacitive sensing array dioxide (CO2) after heating (Figure 5D).[132] These methods are

Adv. Mater. 2021, 33, 2008267 2008267 (7 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 4. A) Schematic of flexible microdome pressure sensor. Adapted under the terms of the CC-BY Creative Commons Attribution 3.0 Unported
license (https://creativecommons.org/licenses/by/3.0/).[121] Copyright 2012, The Authors, published by MDPI. B) Schematic of distance and contact
area changes when sensors without/with microstructure were loaded. C) Force analysis cloud diagram of the sensors without microdome and sen-
sors with different dielectric layer thicknesses of 4, 7, and 10 µm, respectively. B,C) Adapted with permission.[57] Copyright 2019, Elsevier. D) Schematic
showing displacement of the structure for side and normal pressure. E) Human skin inspired E-skin. F) Schematics showing that the sensors were
possible to measure and discriminate in real time normal and shear forces and forces applied in various directions. G) Measured response charac-
teristics of E-skin, for arrays of five-by-five capacitors with orthogonal and spiral grids of pyramids. D–G) Adapted with permission.[74] Copyright 2018,
The Authors, published by AAAS. H) Schematic of a shear stress sensing element: a) without applied forces, b) with a normal force, and c) with a
shear force. Reproduced under the terms of the CC-BY Creative Commons Attribution 3.0 Unported license (https://creativecommons.org/licenses/
by/3.0/.[122] Copyright 2010, The Authors, published by MDPI. I) Schematic of structural changes of different microstructures under the same pressure.

Adv. Mater. 2021, 33, 2008267 2008267 (8 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 5. A) Photograph of a Spongia officinalis. Reproduced with permission.[125] Copyright 2016, Wiley-VCH. B) Fabrication process of the micro­
porous dielectric film by sugar. Adapted with permission.[52] Copyright 2017, Elsevier. C) Fabrication process of an elastomer film with well-distributed
micropores. The cross-sectional image of a portion of the porous PDMS film, observed with the SEM, was also shown. The scale bar represents 50 µm.
Reproduced with permission.[47] Copyright 2016, Elsevier. D) Schematic illustration of one-step processing of the microstructured PDMS film based on a
mixture of PDMS prepolymer and its curing agent with NH4HCO3 and its seamless integration into the process flow for fabricating a flexible capacitive
sensor. Adapted with permission.[132] Copyright 2016, American Chemical Society. E) Capacitance–pressure curves of porous structures with different
pore sizes and unstructured sensors. Reproduced under the terms of the CC-BY Creative Commons Attribution 4.0 International license (https://crea-
tivecommons.org/licenses/by/4.0).[133] Copyright 2020, The Authors, published by Springer Nature. F) Hysteresis characteristics of the PEMC-based
pressure sensor. G) Schematic illustration of structural change of the PEMC under compressive loading, and ΔC/C0 of the PE and the PEMC under
compressive loading. F,G) Reproduced with permission.[71] Copyright 2020, American Chemical Society. H) The ΔC/C0 as a function of the applied pres-
sure. Note that for each weight ratio of water (cw), three different samples were used for the measurements. I) The dependence of the transmittance
of the PDMS films on cw from 0 to 0.3 in the visible range. H,I) Reproduced with permission.[47] Copyright 2016, Elsevier.

Adv. Mater. 2021, 33, 2008267 2008267 (9 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

simple, low-cost, and environmental-friendly. The foam-like a template to provide a bionic micropattern (height-to-width
dielectric film can withstand pressure, bending, and strain. aspect ratio of over 2) as a flexible dielectric layer on the PDMS
The sensor sensitivity was adjusted according to foam density film and covered the film by ultrathin AgNWs as the bottom
(Figure 5E).[133] Increasing the porosity can improve the sensor electrode (Figure 6D).[55] Both methods can significantly
compressibility and expand the sensing range (Figure 5F).[71] expand response range of the sensor (from 200 to 500 kPa,[84]
Park and co-workers produced a simple, economical, and and from 6 to 8 kPa[55]) and further improve the sensitivity
highly sensitive capacitive pressure sensor based on a porous (from 0.038 to 0.815 kPa−1,[84] and from 0.352 to 1.194 kPa−1[55])
Ecoflex-multiwalled carbon nanotube composite (PEMC) mate- (Figure 6C,E).[55,84] In addition, Guo’s group proved that the
rial. Because of the synergistic effect of the elastomer porous Δd/d ratio of sparse microtowers is twice that of dense micro-
structure and the CNT fillers, PEMC exhibits a high capacitance towers owing to the large local stress concentration and is
change than porous Ecoflex (PE), thus increasing sensitivity ≈20 times higher than that of flat PDMS.[55] The hierarchical
(Figure 5G).[71] The pores in the entire volume of the com- structure of the micropapillae and nanofolds on the surface of
posite material can reduce the volume fraction of the elastomer, red rose petals provide the necessary roughness to the pres-
thereby reducing its viscoelasticity and achieving a revers- sure sensor, and the experimental results obtained by the
ible sensor response without obvious hysteresis. Although the natural hierarchical microstructure showed good linearity
increase in porosity helps increase the ΔC/C0 ratio under unit (Figure 6F).[139,142] In addition, rose petals can act as dielectric
load of the sensor (Figure 5H), the light becomes scattered, layers. While pressure sensors with fresh petals have a high
which can affect the transparency of the device because of the sensitivity (1.54 kPa−1) because of the electronic double layer
existence of holes. When the porosity increases, the light trans- that is contributed by the ionic liquid in the fresh petal, sen-
mittance of the sensors decreases (Figure 5I).[47] sors with dried petals have a foam-like hollow structure with
Although an increase in the air ratio can effectively reduce high compressibility (Figure 6G).[139] The petals can be treated
the mechanical modulus and improve sensitivity,[11,67] the cur- using different methods according to the actual application to
rent methods for preparing porous structures are usually achieve the desired effect.
uncontrollable. Even if the amounts of reagents or compounds This method of using natural plants as templates is simple
used for volatilization are controlled, the uneven spatial distri- and effective but is inherently flawed. It completely depends on
bution of pores greatly limits the practical application of the the existing natural materials and the shape, size, and spacing
sensor. of their microstructures, which cannot be controlled or modi-
fied. Therefore, the prepared microstructures cannot exhibit a
uniform morphology.[39] Moreover, some templates have prob-
2.5. Natural Plant-Based Structure lems such as poor spatial distribution and uneven shape and
size, which result in significant differences in the performance
Commonly employed methods used to prepare microstruc- of different batches and difficulty in large-scale, high-resolu-
tures can easily be used to realize soft imprinting of precision tion, and standardization production.
molds, thus obtaining accurate microstructures.[38,107,134–136]
Nonetheless, these methods usually require complicated and
time-consuming mold transfer processes, which are expensive, 2.6. Discussion
thus making it difficult to expand production, and require haz-
ardous chemicals. Waste disposal and environmental pollution The performances of pressure sensors based on microstruc-
caused by E-waste are also challenging problems.[38,138] Com- tures are shown in Table 2. A comparison of the effects of the
pared with these microfabrication methods, natural materials five common microstructures on capacitive pressure sensors
have been extensively studied for their environmental protec- is presented in Table 3. Both porous and natural plant-based
tion, abundance, renewability, sustainability, degradability, and structures have inherent inconsistencies. Owing to the uni-
low cost.[139,140] Natural templated sensors can also achieve the formity of arrangement and distribution as well as the differ-
same performance without expensive and sophisticated instru- ence in pore-forming grains themselves, the pressure response
ments and processes and are safe and commercially promising of the sensor is diverse, which is reflected in the various effects
for the development of E-skin. of the applied force on the structural deformation, resulting in
Leaves or petals have rough microstructures on their sur- a large standard deviation in the preparation process. Among
faces, and their use as templates can significantly improve sen- the existing high-sensitivity flexible pressure sensor devices,
sitivity.[139] The microtower array structure (micrometer level) the nano- or microscale structures are the most commonly
on the surface and the hydrophobic surface for easy demolding employed methods to obtain high sensitivity, especially micro-
of natural lotus leaves has been widely studied.[55,141] The lotus pyramids.[36,102] Many researchers have constructed different
leaf can be reused several times as a mold, and the microcyl- microstructures through FEA, which have proved that sensors
inder does not change as fresh or dry. Zhang’s group used with micropyramids exhibit better performance than other
a lotus leaf as a template to prepare a uniform microporous microstructures because micropyramids have a high stress
electrode (Figure 6A).[84] The micropores in the PDMS/Au concentration and geometric deformation under the same
electrodes were rearranged via the action of the polystyrene pressure.[98,99,101,143] To achieve higher sensitivity, Park’s group
(PS) microspheres in the dielectric layer under applied pres- reported an ultrahigh sensitive pressure sensor-based porous
sure (Figure 6B), to ensure that the flexible device had high pyramid dielectric layer (Figure 7A).[144] Combining the charac-
sensitivity and reproducibility. Guo’s group used a lotus leaf as teristics of the two types of microstructures, the sensors have

Adv. Mater. 2021, 33, 2008267 2008267 (10 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 6. A) Schematic of the fabrication process for micropatterned PDMS film. B) Schematic representation for the deformation of capacitive sen-
sors with and without micropatterned PDMS/Au electrodes. C) Real-time capacitance response curves with stepwise applied forces of microstructured
sensor, nonpatterned sensor, and commercial force gauge. A–C) Adapted with permission.[84] Copyright 2016, Wiley-VCH. D) Schematic illustration
for the fabrication of micropatterned tactile sensor. E) Sensitivity of the micropatterned and nonpatterned sensor. D,E) Adapted with permission.[55]
Copyright 2017, Wiley-VCH. F) Natural materials and device structure: a) photograph of red rose petals; b) SEM image of the rose petal dried by critical
point drying; c) cross-sectional SEM image of the rose petal. G) ΔC/C0 and sensitivity as a function of pressure of the E-skins based on the natural
materials. F,G) Adapted with permission.[139] Copyright 2018, Wiley-VCH.

Adv. Mater. 2021, 33, 2008267 2008267 (11 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Table 2. Summary of the performance of the pressure sensors based on microstructures.

Type Polymer Materials Sensitivity Response time/ Cyclic Detection Pressure range Year Refs.
matrix [kPa−1] recovery time [ms] stability limit [kPa]
Micropyramid PDMS – 0.55 – – A fly 8 2010 [36]
Graphene – 50/– 1000 – 5 2018 [105]
– – 165/132 – – 200 2018 [107]
AgNWs 0.831 30/60 10 000 1.4 Pa 10 2018 [50]
Pt/BOPP 3.73 21/– 10 000 0.1 Pa 100 2018 [106]
rGO + SWCNT 0.7 50/– 20 000 25 2018 [93]
Ti/Au + parylene 70.6 – 10 200 (300 Pa 1 Pa; rice: 0.35 2020 [51]
press)a) 24 mg
TPU SWCNT + graphene – – – – 500 2015 [76]
PHB/PHV PGS 0.76 ± 0.14 – 8000 5 mg 10 2015 [109]
P(VDF-HFP) EMITFSA 41.64 <20/– 5000 <400 Pa; 40 mg 50 2017 [229]
Microneedle/ PDMS – 0.0326 mN−1 – 20 000 – – 2014 [54]
pillar
AgNWs 0.28 100 10 000 2 Pa 200 2019 [116]
Graphene 7.68 30/28 1000 1 mg 4 2019 [114]
Ag@Ni – 49/51 9000 1.9 Pa 145 2020 [113]
PU – 1.76 – – – 6 2012 [230]
PET PVDF + AgNWs 2.94 ± 0.25 <50/– 1000 <3 Pa 7.5 2017 [82]
P(VDF-TrFE) – 0.35 48/60 3000 4 Pa 25 2019 [39]
Microdome PDMS – 1.67% mN−1 – – 26 mN 0.36 N 2010 [122]
– – – – 3 mN 0.75 N; 5.75 Pa 2012 [62]
– 2.8 – – – 3000 2014 [231]
– 0.2 – 5 – 120 2015 [124]
PVDF 30.2 25/50 100 000 0.7 Pa 800 2019 [57]
(15 Pa press)a)
PU CNTs 0.19 ± 0.07 – 30 000 2.7 g 680 2018 [74]
Porous Purchased + water PDMS TiO2 + SrTiO3 + 0.00324 – – – 40 000 2015 [232]
PMN-PT
NH4HCO3 – 0.26 – 3000 1 Pa 1000 2016 [132]
Deionized water – 1.18 150/– – 0.2 kPa 5 2016 [47]
Ps beads – 0.6 40/– 10 000 2.42 Pa 14 2016 [125]
Water-in-oil emul- Carbon black 35.1 – 100 – 12 2019 [33]
sion method
Sugar – 0.51285 200/– 100 400 2017 [52]
Ecoflex CNTs 0.601 – 10 000 0.16 Pa 40 2016 [65]
Sugar + NaCl Conductive fabric 0.0121 – 100 – 100 2017 [233]
Sugar template MWCNT 6.42 <100/– 10 000 – – 2019 [71]
(10 kPa press)a)
As-prepared PET rGO 0.8 100/100 1000 0.24 Pa 4 2016 [129]
Purchased PVDF Ionic liquid 1.194 40/– 5000 – 120 2020 [37]
Natural plant-based Lotus leaf PDMS – 0.815 38/– – Hair: 18 Pa 500 2016 [84]
– 1.194 36/58 100 000 <0.8 Pa 10 2017 [55]
Calathea zebrine [EMIM][TFSI] 54.31 29/32 5400 Leaf: 0.1 Pa 120 2018 [234]
Rose petals + rose – 1.54 – 5000 0.6 Pa 115 2018 [139]
leaves
Rose petals – 0.055 300/280 – – 10 2019 [142]
Porous-pyramid- – 44.5 – 5000 0.14 Pa 35 2019 [144]
based (400 Pa press)

a)The
contents in parentheses indicate the test conditions for cyclic stability experiments.

Adv. Mater. 2021, 33, 2008267 2008267 (12 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Table 3. Comparison of the five common microstructure influences on pressure capacitive sensors.

Type Schematic Advantages Disadvantages Summary Challenge

Micropyramid First proposed Small linear range Uniform 1) Nonlinear at high pressure
The best performance Controllable 2) Unstable nonstationary contact
Expensive 3) Small capacitance/easily affected
Complex 4) Device thickened or opaque

Microdome Distinguish between dif- Greater viscosity

ferent forces Less deformability

Microneedle/pillar Larger deformation Viscoelasticity

Distinguish different forces High loss

Microporous Light mass Uneven hole size and Uneven

Low hysteresis distribution Uncontrolled
Fast response speed Low-cost
High compressibility Simple

Natural plant-based Simple Difficult to standardize

Green production
Low cost
Easy to get

more air phase, which results in a low modulus, large change various methods to improve linearity are not ideal, and the defi-
in the dielectric constant under pressure, and consequently, a nition of the high-pressure range varies for each study. There-
high sensitivity (44.5 kPa−1). fore, the performances of sensors developed in different studies
Although these uniform microstructures can improve the cannot be accurately compared due to the lack of standardized
sensitivity, they exhibit nonlinearity in the range of higher pres- parameters.
sures.[36,58,65,84,100,108–112] Under specified conditions, linearity is The presence of air in the microstructure is also an impor-
defined as the percentage of the maximum deviation and the tant factor that affects the stability of the sensor. When a small
full-scale output value between the sensor’s static calibration force is applied to the device, the gas phase is easily deformed,
curve (the actual curve) and the fitted curve. A high degree of thus improving the sensitivity of the sensor.[62,96,97] However,
nonlinearity affects the judgment of the object deformation this design has inherent defects, and the air in the dielectric
degree and augments the uncertainty between the output and layer can cause unstable baselines and unreproducible sen-
input values. From a mechanical viewpoint, the sharp parts sitivity.[40,71,84] Luo et al. tightly combined the connection part
of the microstructures allow it to be easily compressed under of the tilted micropillars array and the corresponding elec-
external forces. However, the microstructures are gradually flat- trode layer to eliminate the existence of an unstable air phase
tened as the load increases, and their deformability reduces as (Figure 7C).[146] The tilt of the micropillar was used to replace
the elastic modulus increases. The proportion of the polymer the compression deformation under load so that the sensor
matrix in the capacitive device and the contact area between exhibited high deformation (Figure 7D), a large capacitance
the microstructures and opposite surfaces tend to be saturated. change (Figure 7E), high stability, mechanical robustness, and
Thus, the corresponding curve of the capacitance value and load a reliable capacitive response.[146] Because of these characteris-
has a higher sensitivity in the low-pressure range and nonline- tics, the device does not need to be repaired or replaced after
arity in the high-pressure range. This phenomenon complicates mechanical damage in normal use; however, the problem of
the relationship between capacitance and pressure[105] and dete- nonlinearity still exists.
riorates the reproducibility and reliability of the sensor under Because most microstructures are on the micrometer scale,
high input loads.[60] By analyzing the pressure-response curves which causes a certain amount of light scattering, the device
of different microstructure sensors, Miller and Bao found that becomes thicker or opaque (Figure 7F,G)[37,100,147,148] and affects
the pressure response produced by nonuniform, polydisperse the practical application of the sensor. In addition, the capaci-
structures is more linear and has higher sensitivity under high tance value of the electromagnetic interference in circuits
pressures.[124] When the dielectric contains nonuniform micro- and the environment (or human body) usually reaches the pF
structures, only the higher microstructures are compressed ini- level.[106,149] In the presence of air in the microstructure, which
tially, and then, the other smaller microstructures will begin to reduces the initial capacitance, sensors are easily disturbed by
be compressed with an increase in load. This structure with a external noise sources and exhibit large discrete errors.[37,70,150]
nonuniform distribution has higher sensitivity and better lin- This problem harms the measurement accuracy and repeat-
earity than a single uniform microstructured dielectric when ability, which limits its application in weak signal detection and
compressed at higher pressures.[145] However, the effects of high-density integration.[39,81,151]

Adv. Mater. 2021, 33, 2008267 2008267 (13 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 7. A) Schematic and B) capacitance and sensitivity versus pressure of capacitive pressure sensor based on porous pyramid dielectric layer.
A,B) Reproduced with permission.[144] Copyright 2019, American Chemical Society. C) Schematic diagram of the capacitive pressure sensor fabrica-
tion process. D) Electrode displacement versus pressure curves of different structures, obtained by FEA. E) Pressure–response curves of the capaci-
tive pressure sensors for dielectric layers with bulk film, vertical micropillar array, and tilted micropillar array. C–E) Reproduced with permission.[146]
Copyright 2019, American Chemical Society. F) Schematic diagram for the opaque mechanism and SEM images of the porous PVDF film (inset).
G) Photograph of the porous PVDF film. F,G) Adapted under the terms of the CC-BY Creative Commons Attribution 4.0 International license (https://
creativecommons.org/licenses/by/4.0).[37] Copyright 2020, The Authors, published by Wiley-VCH.

3. Stretchable Strain Sensors The deformation of stretchable dielectrics under tension

is mainly affected by the Poisson’s ratio of the dielectric and
Although high sensitivity is an important sensing performance flexible substrate.[89] Owing to the Poisson effect, longitudinal
parameter, most pressure sensors can only bend in a single stretching of the capacitive sensor causes an increase in the
direction and do not allow multiple repetitions of double-cur- length, whereas its width and thickness decrease (Figure 8A).
vature bending and plane shear.[152] Comparatively, stretchable The linear mechanics of this process can be described as
sensors can better attach to surfaces similar to the human skin, follows[68,71,86–89]
which is of more practical value.[10,153] Because the human body
comprises numerous nonflat surfaces and has a fine topology, ∆l (5)
= εx
it is difficult to use real-time diagnosis to closely attach the l
sensor to such irregular and rough structures.[38] To solve this 
problem, the sensor circuit must be stretchable and flexible,
compatible with the compliance of natural biological tissues, ε y = ε z = − νε x (6)

and potentially incorporated into wearable technology and
E-skin of soft robots. Compared with traditional rigid electronic
components, these circuit elements maintain their sensing lstretch = l + ∆l = l + ε x l = l(1 + ε x )
function even when stretched to several times their natural w stretch = w  ∆w = w − νε x w = w(1 − νε x ) (7)
length.[68] dstretch = d  ∆d = d − νε x d = d(1 − νε x )


Adv. Mater. 2021, 33, 2008267 2008267 (14 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 8. A) Response mechanism of the parallel plate capacitors under tension. B) Wave structure response to tension and compression. C) Sche-
matic illustration of the process for fabricating wavy metal electrode on a polymer substrate. D) Process flow of the inkjet-printed stretchable Ag elec-
trode. A–D) Adapted with permission.[156] Copyright 2011, American Institute of Physics. E) SEM images of 2D Ag microwrinkles on flat PDMS surface
prepared via different conditions: varying PDMS crosslinking ratio as: a) 10:1, b) 15:1, and c) 20:1, under the same electroless deposition time (60 s);
varying electroless deposition time as: d) 60 s, e) 90 s, and f) 120 s, with the use of PDMS at a given crosslinking ratio (20:1), and pressure-response
curves of sandwiched Ag wrinkle sensors with the different combinations of PDMS crosslinking ratio and Ag deposition time. E) Adapted with permis-
sion.[157] Copyright 2016, American Chemical Society. F) Schematic of the capacitive pressure sensor, and real-time response of the flexible pressure
sensor to voice vibrations. Adapted with permission.[82] Copyright 2017, American Chemical Society. G) The relative capacitance change versus the
normal pressure as a function of the wrinkled structures of the Ecoflex template, using PMDS electrodes coated with Au. Adapted under the terms of
the CC-BY Creative Commons Attribution 3.0 Unported license (https://creativecommons.org/licenses/by/3.0/).[158] Copyright 2017, Royal Society of
Chemistry. H) SEM image of electrode surface, and capacitance change as a function of time for sensors subjected to step deformation at different
strain levels. Adapted with permission.[159] Copyright 2017, Wiley-VCH.

Adv. Mater. 2021, 33, 2008267 2008267 (15 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

l w  (Figure 8D).[156,173–175] To produce an ideal wrinkle structure,

Cstretch = k0 kmatrix  stretch stretch  the polymer surface is usually treated with ultraviolet/ozone
 dstretch 
(UV/O3) or plasma.[108] PDMS surfaces are selectively activated
 l(1 + ε x )w(1 − νε x ) 
= k0 kmatrix   by UV/O3 exposure or oxygen plasma treatment, which irrevers-
d(1 − νε x ) (8)
  ibly forms strong siloxane bonds (OSiO) with other film
 lw  surfaces,[176,177] whereas inert areas (unexposed areas) retain the
= k0 kmatrix   1 + ε x unmodified surfaces that interact through only weak van der
d
= C0 (1 + ε x ) Waals forces with other surfaces.[178,179] The wrinkle structure is
 similar to a sinusoidal curve, and the nonlinear analysis of its
where l, w, and d are the length, width, and thickness of the initial buckling geometry is as follows[172,180,181]
sensor, respectively, and εx, εy, and εz represent the strains
applied on the x, y, and z axes, respectively; lstretch, wstretch, and π helectrode
dstretch are the length, width, and thickness of the sensor after λ0 =
εc
applying strain, respectively, ν is the Poisson’s ratio of the flex- (9)
ible substrate, k0 is the vacuum dielectric constant, and kmatrix ε
A0 = helectrode pre − 1
is the relative dielectric constant of the flexible substrate. The εc

results indicate that when strain εx occurs, the stretched capaci-
tance Cstrecth is (1 + εx) times that of the initial capacitance C0. where λ0 is the initial wavelength, A0 is the initial ampli-
Therefore, the structure should be changed to achieve high tude, helectrode is the thickness of the electrode layer, εpre
stretchability and deformity for high sensitivity. is the prestrain applied to the flexible polymer substrate,
2/3
Wearable sensors must measure high levels of strain (e.g., E (1 − ν electrode
2
)
ε c = 0.52 sub  represents the critical buckling
50% or more) to detect human posture or movement.[154] Most E electrode (1 − ν sub ) 
2

polymer elastomers have a certain degree of stretchability; how- strain, Esub is the Young’s modulus of the flexible substrate,
ever, traditional metal electrodes cannot withstand large ten- Eelectrode is the Young’s modulus of the electrode, νelectrode is the
sile deformations and cannot generally be stretched to exceed Poisson’s ratio of the electrode, and νsub is the Poisson’s ratio of
a strain level of 1–2%.[155] Hence, long-distance propagation of the flexible substrate. As can be seen from Equation (9), both λ0
cracks cause electrode discontinuities in the metal deposition and A0 in the initial state linearly depend on helectrode; however,
area, which reduces the conductive paths and the overlapped only A0 is related to εpre, whereas λ0 is independent of εpre.
conductive electrode areas, thereby adversely affecting the lin- When εpre > εc, the wavelength λ and amplitude A of the
earity and sensitivity of the sensor.[159] Therefore, most studies buckling structure change with εpre[172,180,181]
have focused on geometric modification of the electrode layer
to allow the deposited metal to exhibit stretchability under high λ0
strain.[156,160–165] However, although there is strong adhesion λ =
between the hard electrode layer and the soft dielectric layer,
(1 + ε pre ) (1 + ξ )1/3
(10)
excessive deformation will cause the electrode layer to crack and A0
A ≈
1 + ε pre (1 + ξ )
1/3
lose conductivity, thereby affecting the accuracy and service life
of the sensor,[76,166] because of which the sensors cannot meet 
requirements of stretchable flexible electronic products. There- λ0 A0
where and represent changes in the expected
fore, introducing microstructured metal electrodes is important 1 + ε pre 1 + ε pre
to improve the stretchability of sensors. wavelength and amplitude based on the mechanics if accordion
bellows, ξ = 5εpre(1 + εpre)/32, which depends only on εpre.
When the buckling structure is subjected to an external force
3.1. Wave/Wrinkle/Buckling Structure εapplied, the wavelength and amplitude of the buckling structure
change with εapplied[172,180,181]
Wrinkles are special structures that imitate the texture of
human skin or fabric surfaces,[167,168] and can be applied to both λ0 (1 + ε applied )
pressure and strain sensing (Figure 8B). At present, numerous λ =
(1 + ε pre )(1 + ε applied + ζ )
1/3

electrodes are fabricated using hard metal or carbon materials

ε pre − ε applied (11)
with a polymer matrix; however, their conductivity decreases as −1
the applied strain increases, which affects their performance εc
A ≈ helectrode
1 + ε pre (1 + ε applied + ζ )
1/3
under tensile conditions.[169] The wrinkle structure can endow

hard materials such as metals or semiconductors with the
ability to withstand deformation. The manufacturing methods where ζ = 5(εpre − εapplied)(1 + εpre)/32, which depends on both
for wrinkles are low-cost and uncomplicated.[108] Wrinkles εpre and εapplied.
are generally achieved by depositing a film or metal electrode Gao et al. adjusted the wavelength and amplitude of wrin-
with a high modulus on a prestrained elastic substrate, and kles by adjusting the crosslinking ratio of the polymer substrate
the system relaxes after being released to form a sinusoidal or electrode deposition time, thereby adjusting the sensitivity
corrugated structure (Figure 8C).[9,164,170–172] Furthermore, and sensing range of the sensor (Figure 8E).[157] The polymer
results similar to wrinkles can be obtained without prestrain crosslinking ratio can also adjust the viscoelasticity of the
using a wave-shaped elastic substrate before film deposition matrix to form a relatively strong adhesion with the electrode

Adv. Mater. 2021, 33, 2008267 2008267 (16 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

layers, thereby ensuring good structural stability under repeated process may lead to the appearance of rough surfaces, which
loads.[169] However, the electrode layer inevitably cracks because is not ideal for practical applications.[153] Texture-based sensors
of the mismatch in the elastic modulus between the hard elec- have poor elasticity in the operating range, have a low baseline
trode layer and the soft dielectric layer,[76,166] thus shortening capacitance, and are susceptible to mechanical friction with
the service life of the sensor. high hysteresis.[70]
For pressure sensing, the air part in the wrinkles can reduce
the effective mechanical modulus,[11] which will improve sensor
sensitivity.[182] Zhu’s group processed a prestretched PDMS 3.2. Serpentine Structure
film through a dry low-pressure air plasma to produce a flex-
ible sensor, which exhibited good performance in the noncon- Although numerous studies on wrinkles have been con-
tact mode, such as in the process of detecting sound vibration ducted, stretchability is only allowed in the direction of the
and airflow (Figure 8F).[82] The plasma treatment method is fold, which leads to poor flexibility or little stretchability in
uncomplicated, efficient, and convenient to operate; however, other directions.[153] The fractal-inspired serpentine struc-
while excessive corrosion or secondary pollution may occur ture allows biaxial strain and even distortion that extends out
on the surface of the material.[82,108,182,183] Chen et al. used a of the device plane by selective attachment to the elastic sub-
sodium hydroxide (NaOH)-treated crosslinked poly(methyl strate.[180,189–193] Furthermore, nonstretchable squares can
methacrylate) (PMMA) film as the separation layer to prepare be repeatedly cut and subdivided into smaller squares. After
an ultrathin and ultralight (<60 g m−2) solution-based layering multiple subdivisions, the structure becomes more compli-
polymer film. The AgNW/PMMA film was attached to pre- cated, the scalability becomes stronger, and the stretchability
stretched PDMS film, and then, the PDMS film was released to is improved (Figure 9A).[194] Using a similar method, the ser-
its initial state to form a wrinkle structure.[184] However, NaOH pentine structure buckles due to the change in amplitude or
is strongly alkaline, highly corrosive, and using it in the prepa- wavelength when the applied strain reaches a critical value
ration process is a dangerous task, which pollutes the environ- (Figure 9B).[195,196] Without stress concentration, the structure
ment. Baek et al. prepared a wrinkled Ecoflex film by simple can prevent the material from delamination or cracking,[197]
stretching and releasing to produce a wrinkled surface micro- ensuring that the strain on the metal electrodes is maintained
structure with a size of tens of micrometers.[158] The effect of below their elastic limit. Therefore, the electrode maintains a
the surface microstructure of the wrinkled film on the sensor conductive path during the deformation process and achieves a
performance was systematically studied by comparing the greater range of stretchability.[169,191,198,199]
unwrinkled film, single-sided wrinkle film, and double-sided A serpentine structure can be considered to be a simple
wrinkle film. The double-sided wrinkled pressure sensor can structure composed of two straight lines with a length of l1
effectively improve the sensitivity of the sensor and speed up and a semicircle with a diameter of l2 (width w and thick-
the response and release time compared with unwrinkled film ness t).[161,200,201] Through modeling and experiments, the
(Figure 8G).[158] deformation process of the serpentine structure can be
For strain sensing, the wrinkled structure can absorb the divided into three stages: 1) the wrinkling stage (t ≤ 2 µm,
main tensile strain when the flexible substrate is released[185] 1
t  3E sub  3 l
and can continuously transform the tensile strain into <  ): the elastic stretchability first increases and
bending, thereby adapting to external deformation and effec- w  E electrode  2π w
tively improving the stretchability of hard devices[153] without then decreases as t increases; 2) the buckling stage (2–50 µm,
1
mechanical damage.[180] Using the anisotropic characteristics  3E sub  3 l t
of the wrinkles and buckling structures, strains in different   < < 1): the elastic stretchability monotoni-
 E electrode  2π w w
directions can be distinguished, thus allowing the sensors
cally increases to saturation with t (when t = 45 µm, elastic
to accurately monitor the motion and surface state of target
objects.[186,187] Arab Hassani et al. prestretched a double-sided stretchability is 100%); 3) the shearing stage (t > 45 µm, 1 < wt ):
adhesive acrylic elastomer to 200%, and then released it and the elastic stretchability is independent of t (Figure 9C).[161] In
added it to the polyimide (PI) substrate to obtain a sensor with a the above equations, E sub and E electrode are the plane-strain mod-
wrinkled structure to monitor force and tension.[188] Atalay et al. ulus of the flexible substrate and the electrode, respectively, and
created a wrinkled structure by a combination of direct-write usually E sub  E electrode .[161,200] The results suggest that in addi-
laser raster and biaxial stretching, which can greatly improve tion to the influence of the cross-sectional aspect ratio t/w, the
the stretchability of the soft sensor and conductive electrode, elastic stretchability of the serpentine structure also increases
with an electrode conductivity of the electrode up to 250% and when the yield strain and serpentine spacing (l/w) increase.[201]
a linear output of capacitance sensor up to 85% (Figure 8H).[159] In addition to adjusting the parameters to enhance duc-
The performances of the sensors based on the wrinkle struc- tility (Figure 9D), the fractal design of serpentine geometry
ture are shown in Table 4. Methods for fabricating microstruc- also exhibits response characteristics of orientation and spa-
tured molds using spontaneous buckling of polymer films are tial customization.[202] The rich fractal graphics can be used as
simple, low-cost, and useful for most flexible devices converted a space-filled structure with generalizable design rules, which
to stretch.[153] However, the mechanical properties of metal can be promoted and installed on the skin as a wearable device.
materials limit further improvement of their stretchability. Kim’s group designed a sensor array with a serpentine struc-
Moreover, their microstructures are irregular and uncontrol- ture so that its stretching could be adjusted according to the
lable. The pressure sensor has poor stability and reliability for dynamic mechanical characteristics of the target skin segment
different batches of samples.[82] In addition, the stretch–release (Figure 9E,F).[203] Pan’s group applied Ag serpentine electrodes

Adv. Mater. 2021, 33, 2008267 2008267 (17 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Table 4. Summary of the sensors based on wrinkles structure.

Type Polymer Materials Max strain Sensitivity Response Cyclic stability Detection Pressure Remarks Year Refs.
matrix [%] [kPa−1] time/recovery limit range [kPa]
time [ms]
UV/O3 treatment + PDMS + AgNWs – >3.8 <150/– 1500 40 mg/15 Pa 5 Sense the pressure 2012 [108]
prestretched PDMS PMMA or (1.5 kPa distribution of each
PVP press)a) finger when grab-
5000 (bend)a) bing an object
Si substrate pat- PDMS AgNWs 50 – – 4 (20% – – – 2012 [205]
terned with rectan- strain)a)
gular AgNW films
Plasma treatment PVDF + – 2.94 ± 0.25 <50/– 1000 <3 Pa 7.5 Wrinkles + 2017 [82]
of dry low-pressure AgNWs microhairs
air + prestretched
PDMS
Plasma – – 2.04 ± 0.16 <100/– – <7 Pa/70 mg 9 – 2018 [183]
Plasma treatment BaTiO3 + – 4.9 <50/– 5000 <1.7 Pa 10 – 2019 [235]
under low-pressure PVDF
air + prestretched
PDMS
UV/O3 exposure + Ti/Au-PET – 14.268 50/<0.2 s 10 000 1.5 Pa 40 Respiratory moni- 2019 [11]
prestretched PDMS toring and vocaliza-
tion recognition
UV/O3 radiation + Ecoflex Au-coated – 0.013 578/782 50 (press)a) 150 mg 10 Double-side 2017 [158]
prestretched Ecoflex electrode wrinkled template
– Block Photonic 100 – 80/78 5000 – – The strain-respon- 2018 [236]
copolymer crystal (50% strain)a) sive structural color
Prestretched PS PS Au 200 0.148 <10/<17 (Up to 10 1N 600 – 2019 [182]
Hz)a)
Prestretched PDMS PDMS + AgNWs + 40 2.76 – 3000 (bend)a) 50 Pa; 12 mg 1 Controlling all 2019 [184]
PMMA PEDOT:PSS 3000 actions of a
(20% strain)a) shooting computer
game with only
three fingers
Biaxial prestretched PVDF-HFP Silver flakes 800 – – 5000 (50% – – Wrinkles + woven 2019 [221]
acrylic tape + PVDF strain)a) fibers
(3M VHB 4905) nanofibers

a)
The contents in parentheses indicate the test conditions for cyclic stability experiments.

based on PET to prepare of a stretchable flexible sensor, realizing a serpentine structure requires expensive lithography and
the static and dynamic mapping of large-scale spatial contact/ vacuum metal evaporation,[205] which greatly increases the
pressure/strain distribution (Figure 9G).[204] From 30°, 45°, 60° to manufacturing cost. The snake-like electrode reduces the
90°, the change in capacitance increased linearly with an increase contact area of the conductive part, thereby increasing the
in the arm bending angle. Liquid metals are promising materials impedance between the electrode and skin and reducing
for strain sensors because they can withstand large deformations capacitance.[1,206,207] A smaller capacitance results in a lower
while maintaining electrical conductivity. Fassler and Majidi SNR,[70,106,150] which is susceptible to interference from external
injected a liquid alloy into an Ecoflex elastomer through a 3D noise caused by circuits and the environment (or human body),
printed mold to create microchannels and prepared a square- thus affecting the reliability of measurement.[37,149]
wave capacitor comprising two serpentine electrodes that shared
the main axis. When the sensor was stretched along this major
axis, the capacitance of the square wave capacitor changed along 3.3. Mesh Structure
with the extension of the electrode (Figure 9H).[68] In addition
to hyperelastic strain sensing, soft capacitors and inductors can 3.3.1. 2D Mesh
also serve as circuit components for wireless communication
and analog filtering, as well as in RLC circuits for high-band Numerous electrodes are composed of relatively hard metals
pass filtering and radio frequency oscillators. (or carbon materials) and polymer matrices; however, their
Although the serpentine structure can provide a metal elec- conductivity decreases with an increase in the applied strain,
trode sensor with excellent stretchability, the preparation of which affects their performance under tensile conditions.[169]

Adv. Mater. 2021, 33, 2008267 2008267 (18 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 9. A) Finite element calculations for finite size hinges in silicone rubber. The cuts can be combined in a multilevel hierarchy. Reproduced with
permission.[194] Copyright 2014, The Authors, published by National Academy of Sciences USA. B) Schematics showing the stretching process of the
serpentine design. C) Experimental fatigue measurement and FEA study of the dependence of the elastic stretchability on the thickness of Cu inter-
connects. B,C) Reproduced with permission.[161] Copyright 2017, Wiley-VCH. D) Cross-sectional photographs of the 3D printed wavy electrodes with
different joining angles. Scale bar: 5 mm. Adapted with permission.[202] Copyright 2017, Wiley-VCH. E) Regional strain maps of the skin, calculated
using positional information acquired by motion-capture system for four different motions: clenching fist, front bending, tilting left, and right. F) Map
of maximum stretching range for the entire area acquired by combining the data from (E), and corresponding arrangement of site-specifically designed
single crystalline silicon nanoribbon strain gauge. E,F) Reproduced with permission.[203] Copyright 2014, Springer Nature. G) Schematic illustration
of the device fabrication process. Reproduced with permission.[204] Copyright 2015, Wiley-VCH. H) A square wave sample at different strain is shown.

By aligning the serpentine electrodes orthogonally, a 2D mesh (Figure 10A).[197,208] If a metal film is designed in a network
structure can be formed, which further increases the ductility structure, stretchability will be improved.

Adv. Mater. 2021, 33, 2008267 2008267 (19 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 10. A) Schematic of stretched memory on PDMS. B) Tilted SEM image of the polyimide network (scale bar: 500 µm); the inset is a higher-
resolution SEM image of a meandering interconnect (scale bar: 50 µm). C) Pressure mapping before and after the 300% expansion of an SCMN; the
position of the pressure load is also identified after expansion. A–C) Adapted under the terms of the CC-BY Creative Commons Attribution 4.0 Inter-
national license (https://creativecommons.org/licenses/by/4.0).[209] Copyright 2018, The Authors, published by Springer Nature. D) Structures with
different shapes are labeled P1–P12. E) Effective Poisson’s ratio curves under tensile strain corresponding to different structures in (D). D,E) Adapted
with permission.[166] Copyright 2019, Wiley-VCH.

Inspired by human skin, Wang’s group designed a highly capability (Figure 10C).[209] Ying et al. used a silicon nanofilm
stretchable metal-matrix network. A network structure has 100 (SiNM) diode-multiplexed electrode array for electrical stimu-
winding wires that connect the sensing nodes to achieve multi- lation. A SiNM pressure gauge was used for high-sensitivity
functional use of scalable sensing performance (Figure 10B).[209] strain monitoring, and an elastic capacitor was used for tactile
The specific scalable sensor unit was assembled on a structured sensing. The importance of nanogeometry in achieving the
PI network for 3D integration, with an adjustable sensing required mechanical properties was demonstrated via mechan-
range (sensitivity up to 22.4 MPa−1) and large area expansion ical analysis and FEA.[201] In addition to using serpentine

Adv. Mater. 2021, 33, 2008267 2008267 (20 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

network structures, other shapes can also be used to form more can further improve the tensile properties and maximum stress
complex network structures to allow the sensors to withstand of the material, the hierarchical NP–MP structure in the porous
more complex deformations, such as rotation or twisting.[10,210] polymer improved the mechanical sensitivity and stretchability
Wang et al. designed 2D mesh structures with 12 different (maximum strain 400%) compared with the nonporous struc-
shapes through laser cutting, including common regular and ture (240%) (Figure 11G).[56] Peng et al. designed a sandwich-
irregular shapes (Figure 10D).[166] By comparing and analyzing structured sensor, the core of which was a three-layered porous
the changes in the effective Poisson’s ratio and wrinkling state structure prepared using a simple sugar particle template tech-
of different structures with increasing strain, they found that nology, and two panels contained isolated conductive networks
the commonly used structures (P1–P4) were wrinkled within a of AgNWs and carbon nanofibers. The new multidirectional
larger prestrain range, whereas the AgNW imitating network sensor had a unique asymmetric sandwich structure that could
film (P11) and the AuNM film (P12) designed in the reference be employed to simultaneously detect multiple stimulus sig-
(Figure 10D)[166] were in an unwrinkled state within a larger nals, such as pressure and tension (Figure 11H).[137] Park et al.
prestrain range (Figure 10E). This conclusion provides good used E-skin made of a porous microstructure to distinguish
guidance for designing flexible transparent electrodes. between various forms of tactile information, such as pres-
A metal penetration network is an ideal stretchable electrode sure, strain, bend, and sound vibration (Figure 11I).[94] In addi-
structure. However, it is very difficult to construct a 2D mesh tion, the porous surface of PDMS made it nonadhesive to the
structure.[197] Moreover, the network structure has problems SWCNT electrode due to its reduced contact area, which was
associated with small electrode areas and small capacitance, beneficial for repeated measurement and expanded application
such as the serpentine structure. Problems such as those asso- prospects.
ciated with smaller sensing capacitors require sophisticated Although the 3D mesh structure can be employed for strain
devices for measurement[106] and are susceptible to interference sensing, the maximum deformation achieved in currently
from external noise or parasitic capacitance (electromagnetic research is smaller than that of other structures, usually no
interference in circuits and ambient noise are usually up to the more than 50% and only ≈10% for some structures.[33,37,130] This
pF level).[37,38,70,150] Meanwhile, 2D mesh sensors have a small greatly limits its practical application. In addition, as with the
SNR, large discrete error,[81] poor accuracy ,and low reliability porous structure of the pressure sensor, the uniform size and
for repeated measurements, which is unfavorable for weak distribution of the holes remain problems to be solved.
signal monitoring and high-density integration.[39,149,151]

3.4. Textile/Woven Fiber Structure

3.3.2. 3D Mesh
Since the 17th century, Irish fishermen have woven woolen
The mesh structure was not limited to a 2D structure. By fur- sweaters. In modern society, weaving is a process in which
ther introducing a 3D stretchable structure, the stretchable coils are formed by yarn using knitting needles, which are
electrode exhibited good conductivity under higher strain. For then connected to textiles through stringing. Compared with
example, a piece of paper cannot be stretched; however, a paper other clothing, textiles have a 3D mesh structure. This porous
net is highly stretchable. The greater the number of grids, the structure endows textiles with ductility, mechanical toughness,
greater the degree of stretchability (Figure 11A).[211] The 3D breathability, softness, and comfort.[152] The appropriate combi-
mesh structure was similar to the porous structure of the pres- nations of textiles and clothes can be used for real-time moni-
sure sensor. toring of human pulse, movement, and other daily activities;
Commercial organic foam materials are used as dielectrics these textiles have grate potential for application in wearable
for both pressure and strain sensing (Figure 11B), and the devices.[31,151] Lee’s group demonstrated the feasibility of tex-
sensor combines a compressible silicone foam as a dielectric ture-based sensors in wearable devices by integrating them into
layer with microcracked stretchable gold as the electrode layer, gloves and clothes in the form of fabrics to control the machine
thus achieving a pressure sensitivity from 5 to 405 kPa with a wirelessly (Figure 12A), which proved the feasibility of textile-
maximum tensile strain of up to 30% (Figure 11C).[212] Zheng based sensors in wearable devices.[14]
et al. heated and cured a mixture of PDMS and water to form Capacitive sensing systems based on textiles can be estab-
a porous PDMS dielectric layer (Figure 11D). After drying lished not only at the textile level[152] but also at the fiber
the soaked sensor, its performance could still be restored to level,[14,213] which is conducive to the construction of ortho­
the its original state with excellent mechanical circulation gonal textile arrays[214] and facilitates integration with clothes.
(Figure 11E).[130] Based on the 3D mesh structure, adding other Special response characteristics and directional sensitivity can
functional materials into the composite materials can provide be achieved by fabricating a sensor with a woven structure by
the sensor with other ideal functions. Park et al. mixed spiro- embedding conductive materials with porous structures into
pyran, PDMS, and silica nanoparticles (SNPs) in a hydrophilic the elastomer matrix.[13,215–219] Cooper et al. melted liquid metal
cosolvent (water and ethanol) to prepare a porous mechanical into hollow elastic capillaries to obtain fibers integrated with
color-changing composite material with a graded nanoporous– fabrics and then wound it into spirals to create a capacitive
microporous (NP–MP) structure, which could be used to visu- sensor with the capability of sensing torsion, strain, and tactility
alize the magnitude of strain (Figure 11F).[56] Because the local (Figure 12B). When twisted or stretched, the geometry of fibers
stress in the graded NP–MP structure increases energy dissipa- and the capacitance between the fibers change accordingly,
tion, and modifying the porous composite material with SNPs thereby achieving good sensing performance (Figure 12C).[213]

Adv. Mater. 2021, 33, 2008267 2008267 (21 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 11. A) Stretching two sheets of letter-sized papers containing an array of slits with coarse and fine ligaments, respectively. B) Schematic of
the stretchable capacitive pressure sensors. C) Relative capacitance change as a function of applied tensile strain at different compressive states.
A–C) Adapted with permission.[212] Copyright 2015, Wiley-VCH. D) Schematic illustration of the fabrication procedure for preparing the wearable
capacitive sensor. E) Relative capacitive change rate during approach-leave operations, repeated stretching cycle operations, and repeated pressure
cycle operations. D,E) Reproduced under the terms of the CC-BY Creative Commons Attribution 4.0 International license (https://creativecommons.
org/licenses/by/4.0).[130] Copyright 2020, The Authors, published by Wiley-VCH. F) Photographs of mechanochromic polymers with different structures
exhibiting color changes in response to tensile strain. G) FEA-determined stress distributions of mechanochromic polymers with different pore sizes
(left) and with 300 nm SNPs and a 5 µm pore size (right). F,G) Reproduced with permission.[56] Copyright 2019, Wiley-VCH. H) Experimental setup
for detection of compression, shear, and slippage, and corresponding measurements of force, relative capacitance, and resistance. Adapted with
permission.[137] Copyright 2020, American Chemical Society. I) Detection of various mechanical stimuli under: a) repeated normal pressure, b) strain,
c) bending, and d) sound vibration. Adapted with permission.[94] Copyright 2014, Wiley-VCH.

For textile-based strain sensors, the applied strain will cause than individual fibers, thereby suppressing the local stress
macroscopic deformation of the network structure rather during the stretching process and improving its stretchability

Adv. Mater. 2021, 33, 2008267 2008267 (22 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Figure 12. A) Photograph showing the smart glove with the textile-based pressure sensors on the ends of four fingers (the index, middle, ring, and
little finger) and clothes with 4-channel pressure sensors. Adapted with permission.[14] Copyright 2015, Wiley-VCH. B) Schematic of the torsion sensing
mechanism with two twisted fibers. Changes in geometry by twisting increase the capacitance between the intertwined fibers. C) Capacitance change
per length normalized by the diameter of the fibers collapses the data onto a regression line. B,C) Adapted with permission.[213] Copyright 2017, Wiley-
VCH. D) Schematic of the tough elastic conductor. E) Stretchability and conductivity dependences on the nanofiber fraction for the free-standing film.
F) Cyclic stabilities of the buckled structures of the tough elastic conductors with and without nanofiber reinforcement. D–F) Adapted with permis-
sion.[221] Copyright 2019, American Chemical Society.

and stability.[169,220] Polyvinylidene fluoride (PVDF) has a high strain.[70] This leads to considerable challenges in the process
dielectric constant among polymers, however, it cannot with- of manufacturing complex structures in the fibers by the con-
stand large tensile strain. For use in capacitive strain sensors, ventional fiber spinning process, and the weaving process
Someya’s group layered a PVDF nanofiber-reinforced elastic limits the freedom degree of the design because the fiber/yarn
conductor film and a stretchable dielectric layer on top of a path is constrained along the warp or weft direction within the
prestretched elastomer and obtained a capacitor with a wrinkle fabric.[222] In addition, the incompatibility between the sensors
electrode after release (Figure 12D).[221] The PVDF nanofiber and soft textile fibers may cause delamination and mechanical
sheet can eliminate stress and suppress crack propagation, failure.[223] The low durability and low wear resistance of sen-
which ensures that the sensor maintains good electrical con- sors with textiles under repeated stretching are also serious
ductivity under high strain (Figure 12E) with great stability problems[152] because clothing is affected by chemical corrosion,
(Figure 12F).[221] This biaxial prestrain can also be used to dem- thermal fatigue, and other factors, resulting in local damage or
onstrate biaxial stretchability and can even be applied to harsh microcracks, which affect the service life of electronic textiles.
mechanical deformations.
Although the good mechanical properties of composite
fabrics and silicone elastomers reduce the application limita- 3.5. Discussion
tions of traditional sensors on wearable devices, the fibers in
the textile industry are usually thick and have a size range of The performances of strain sensors based on microstructures
tens to hundreds of micrometers, which leads to a large elastic are shown in Table 5. A comparison of the effects of the four
modulus. The sensors may undergo plastic deformation or per- common microstructures on the capacitive strain sensors is pre-
manent irreversible deformation when stretched to a certain sented in Table 6. The above-mentioned “stretched structure”

Adv. Mater. 2021, 33, 2008267 2008267 (23 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Table 5. Summary of the performance of the strain sensors based on microstructures.

Type Polymer matrix Materials Cyclic stability Detection limit Max strain [%] Remark Year Refs.
Serpentine Ecoflex Liquid-phase gallium– 4 – 200 Capacitance and inductance 2013 [68]
indium–tin alloy
PI Si 5 – 80 Humidity sensor 2014 [203]
PDMS Ag 1000 6 Pa 70%; 100 kPab) – 2015 [204]
b)
PI 54 000 (300% – 800%; 400 kPa Simultaneous multi- 2018 [209]
strain)a); 450 stimulus sensing; adjustable
(150 µm bend)a) sensing range; large-area
expandability
2D mesh Au No wrinkle or fold after
deformation;
PDMS 1000 (100% – 100 High transparency 2019 [166]
strain)a)
PI + Ecoflex – – 25 – 2012 [69]
3D mesh – PDMS SWCNT – 2.5 Pa 30 Differentiating multiple 2014 [94]
Mechanical stimuli
Water-in-oil Carbon black 100 – 10 – 2018 [33]
emulsion
method
Deionized water Spiropyran + SNPs – – With porous- Mechanochromic 2019 [56]
+ ethanol 400; without
porous-240
Water Liquid metals 1000 – 10 Noncontact detectivity 2020 [130]
Sugar AgNWs/CNTs – – 50 Measurement of multiple 2020 [137]
forces
Purchased Silicone Au + EGaIn – – 30 Decoupling the strain and 2015 [212]
pressure cross-sensitivity
DMF PVDF Ionic liquid – – 18 Transparency 2020 [37]
Woven fibers Woven PDMS PEDOT:PSS – – 20 – 2016 [13]
Commercial PVDF-HFP + [EMIM] – 2.4 Pa – – 2017 [151]
textiles [TFSI]
1000 – 100 – 2017 [70]
Nylon Ecoflex Ag – – 30 – 2017 [31]
Nanofibers PVDF Ag + fluoroelatomer 5000 – 800 – 2019 [221]
(50% strain)a)

a)The
contents in parentheses indicate the test conditions for cyclic stability experiments; b)The sensor can be used for both strain sensing and pressure sensing.

has good biocompatibility, which makes up for the limitations of and mismatch of the Young’s modulus of different components,
traditional rigid elements in motion and mechanical adaptation unfixed connections between fibers will slip or separate under
to the human skin.[3,224] However, the manufacturing processes the mechanical strain applied by static and loading/unloading
of stretched structures are usually complicated and low-yield, cycles for a long time. Thus, the SNR is limited, which causes a
which increases costs, and have a negative influence on mass significant interference to the actual strain signal[169] and affects
production.[225] Moreover, some stretched structures are limited the accuracy of the output data.
in the stretching direction and have unstable electrical function- Compared with pressure sensors, the development of strain
ality and mechanical integrity under large periodic mechanical sensors remains sluggish. The main goal of the stretched struc-
deformation.[226] The main reasons for the degradation in per- ture method is to endow the sensors of nonstretchable materials
formance of strain sensors are the fatigue and plastic deforma- with stretchability, which is different from the characterization
tion of polymer substrates, as well as the fracture and buckling of pressure sensors. The goals of research on pressure sensors
of sensing nanomaterials under high strain, which makes the are to improve the sensitivity, shorten the response time, and
strain sensors unsuitable for long-term applications. Some improve the linearity of the output curve. However, the current
studies have combined 3D geometric engineering with elas- characterization of strain sensors focuses on stretchability and
tomer substrates to achieve electrically stable and high-perfor- repeatability, the minimum detection amount of strain sensing
mance stretchable electrodes.[227,228] Considering the diversity is not focused upon.

Adv. Mater. 2021, 33, 2008267 2008267 (24 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Table 6. Comparison of the four common microstructure influences on strain capacitive sensors.

Type Schematic Advantages Disadvantages Summary Challenge

Wrinkle First proposed Uncontrollable microstructure Uneven Methods of obtaining
Prepared simply Stretchable in one direction Uncontrolled stretchability deteriorate
Low-cost sensitivity
Simple

Serpentine Enhanced ductility Susceptible to interference Uniform

Directed response Controllable
Expensive
Complex

Mesh
2D Stretchable in all directions
Large deformation

3D Uneven
Uncontrolled
Low-cost
Simple

Woven fibers Combined with clothing Irreversible deformation

4. Challenges and Outlook

New fabrication techniques and new information transmission
methods (e.g., wireless technology) have promoted the develop-
ment of capacitive sensors. However, some problems remain to
be resolved. Common microstructured capacitive sensors have
the following conflicts (Figure 13):

1) Conflict between high sensitivity and stretchability: For pres-

sure sensors, different microstructures are used to achieve
high sensitivity and low hysteresis;[36,40,55,106] however, they
cannot be used in large strain situations. Strain sensors use
microstructures to convert materials with poor stretchability
into structures that can withstand large strains[153,185,195,196]
but with low sensitivity. No published works have combined
the advantages of high sensitivity and stretchability because
high sensitivity requires the sensor to cause large changes in
capacitance by producing significant large structural changes
under small strain.[91] Stretchability is required to maintain
the integrity of the structure and the morphology of the
material under large strains. Realizing high sensitivity and
stretchability simultaneously by designing an outstanding
microstructure in the same capacitive sensor in the future is
still a challenging task.
2) Conflict between hysteresis and anti-interference: A higher
amount of air phase in the microstructure means a smaller Figure 13. Current conflicts and future prospects of capacitive sensors.

Adv. Mater. 2021, 33, 2008267 2008267 (25 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

amount of polymer in the same volume. The air can reduce 5) Environmental protection: The development of microstruc-
the contact area between the microstructure layer and the tures is usually a low-yield and high-cost process, which
opposite layer, thereby reducing the viscoelasticity and hys- involves complex multistep fabrication steps such as lithog-
teresis of the sensors.[106] However, microstructured design raphy, transfer, and vacuum deposition,[153] which greatly
has inherent drawbacks such as the permittivity of air limit their practical application. Using low-cost, low-loss
being much smaller than that of the polymer matrix, which materials or reusable electronic components with fewer
reduces the initial capacitance of the sensor, leading to poor manufacturing steps can greatly reduce electronic waste and
anti-interference ability and low SNR. This problem affects make the process cost-effective.
the measurement accuracy, which limits its application in 6) Cyclic stability and chemical stability: The test of cycle dura-
weak signal detection and high-density integration.[39,149,151] bility usually involves load/release cycles with pressure or
3) Conflict between uniformity and cost: Although the com- tension on sensors using testing machines in the laboratory.
monly used methods to prepare microstructures have promi- However, the magnitude and direction of stress and strain
nent advantages in obtaining fine structures, the preparation are uncertain in real life. Pollutants in the natural environ-
processes usually require multiple steps, such as sophisti- ment (e.g., dust, gas, and microorganisms) and pollutants on
cated and time-consuming photolithography and chemical the human skin surface (e.g., grease, sweat, and body fluids)
etching,[38,107,134–136] which greatly increases the cost and are complex.[151,169] Encapsulation technology is required to
duration of production. In contrast, preparation methods for isolate the sensor from the external environment and solve
porous and natural plant-based structures are usually simple these problems without affecting communication and data
and inexpensive.[47,52,71,130,132,137] However, these methods are processing.
usually poorly controlled. The uneven distribution of pores 7) Comfort and fashion: The appearance of a product is also an
and the randomness of natural microstructures fail to gen- important evaluation indicator of daily use.[152] In addition to
erate the desired morphologies in the prepared microstruc- intelligence, the sensor should also be softness and comfort,
tures,[39] which lead to poor stability and low reliability in should be designed with a good sense of fashion, have an
different batches of products.[82,114] Therefore, such conflicts elegant appearance, and cause less hindrance to daily life
greatly limit the mass production and performance of the activities.
sensors.

These challenges also provide opportunities for the future 5. Conclusions

development of capacitive sensors (Figure 13):
We have summarized the advantages, disadvantages, and
1) Standardization: Currently, the characterization parameters practical applications of several popular microstructures that
of capacitive sensors mainly include sensitivity, linearity, are widely employed in capacitive sensors. The microstruc-
detection limit, hysteresis, and stability, whereas the criteria tured dielectric layer or electrode can improve sensor sensi-
for evaluating performance are different. Hence, a specific tivity, reduce hysteresis, and endow the rigid electronic device
standard is required to determine the capacitive sensors in with excellent elastic stretchability, which is an essential
the corresponding application fields. For example, if capaci- part of the next-generation wearable devices and soft robots.
tive sensors are employed in wearable devices, the device Because the volume of polymers is almost unchanged when
should be able to withstand at least 50% strain and tens pressure is applied, the polymer dielectrics are inherently vis-
of thousands of cycles of stability to meet the deformation coelastic. These shortcomings severely limit the improvement
range and cycles of human skin. in sensitivity and high hysteresis. Therefore, more efforts
2) Versatility: Numerous research efforts have been devoted have been applied to strengthen the sensing performance by
to multifunctional signal pressure, strain, and touch sen- designing different microstructures of materials. To accel-
sors for temperature, humidity, airflow, acoustic waves, and erate the development of flexible and stretchable capacitive
other sensing fields. E-skins are increasingly able to imitate sensors with different microstructures, as we pointed out in
or even surpass the functions of human skin, improving this review, three types of conflicts between high sensitivity
sensing performance and expanding application areas. and stretchability, between hysteresis and anti-interference,
3) Biocompatibility: Flexible devices fit well with human skin. and between uniform and cost should be focused upon. In
For example, retractable temperature sensors have great addition, the various challenges presented in this review also
application prospects compared to traditional rigid thermal provide opportunities for the future development of capacitive
sensors.[167] Moreover, biodegradable sensors implanted sensors. Finally, the rise of new technologies such as wire-
into the body can be degraded through human metabolism less communication and supercapacitors has promoted the
during the postoperative recovery phase, which causes no rapid development of capacitive sensors, indicating that multi­
secondary harm to the patients. functional E-skins with similar or even better performance
4) Flexibility: Most capacitive sensors currently studied require than human skin with broader application prospects can be
an additional power supply. Bulky batteries and complex developed. We expect that this review will provide a compre-
wiring limit system flexibility. However, wireless technology hensive understanding for designing advanced flexible and
and self-powered technology can solve these problems, stretchable capacitive sensors using ingenious human-made
without affecting the normal activities of the human body. microstructures.

Adv. Mater. 2021, 33, 2008267 2008267 (26 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Acknowledgements [23] D. Wang, Z. Fan, G. Rao, G. Wang, Y. Liu, C. Yuan, T. Ma, D. Li,
X. Tan, Z. Lu, A. Feteira, S. Liu, C. Zhou, S. Zhang, Nano Energy
This work was supported by the National Natural Science Foundation 2020, 76, 104944.
of China (Grant Nos. 51921005 and 51802023), the Fund of IPOC BUPT [24] Y. Ma, W. Tong, W. Wang, Q. An, Y. Zhang, Compos. Sci. Technol.
(Grant No. IPOC2020ZT09), and the Fundamental Research Funds for 2018, 168, 397.
the Central Universities under Grant No. 2019RC23. [25] S. Xu, Y. Qin, C. Xu, Y. Wei, R. Yang, Z. L. Wang, Nat. Nanotechnol.
Note: Some of the columns in Table 6 had been shifted on intial 2010, 5, 366.
publication online. The table’s column layout was corrected on [26] G. R. Witt, Thin Solid Films 1974, 22, 133.
August 24, 2021. [27] W. Obitayo, T. Liu, J. Sens. 2012, 2012, 652438.
[28] L. Duan, D. R. D’hooge, L. Cardon, Prog. Mater. Sci. 2020, 114,
100617.
Conflict of Interest [29] J. G. Dabling, A. Filatov, J. W. Wheeler, in 2012 Annu. Int. Conf.
of the IEEE Engineering in Medicine and Biology Society, IEEE,
The authors declare no conflict of interest.
Piscataway, NJ, USA 2012, pp. 162–165.
[30] M. Cao, X. Wang, W. Cao, X. Fang, B. Wen, J. Yuan, Small 2018, 14,
1800987.
Keywords [31] M. Totaro, T. Poliero, A. Mondini, C. Lucarotti, G. Cairoli, J. Ortiz,
capacitive sensors, geometric design, microstructures, sensitivity, L. Beccai, Sensors 2017, 17, 2314.
stretchable materials [32] C. S. Sander, J. W. Knutti, J. D. Meindl, IEEE Trans. Electron Devices
1980, 27, 927.
Received: December 7, 2020 [33] M. Pruvost, W. J. Smit, C. Monteux, P. Poulin, A. Colin, npj Flex-
Revised: March 5, 2021 ible Electron. 2019, 3, 13.
Published online: July 8, 2021 [34] R. Puers, Sens. Actuators, A 1993, 37–38, 93.
[35] J. Y. Sun, C. Keplinger, G. M. Whitesides, Z. Suo, Adv. Mater. 2014,
26, 7608.
[36] S. C. B. Mannsfeld, B. C. K. Tee, R. M. Stoltenberg, C. V. H. H. Chen,
[1] J. Heikenfeld, A. Jajack, J. Rogers, P. Gutruf, L. Tian, T. Pan, R. Li, S. Barman, B. V. O. Muir, A. N. Sokolov, C. Reese, Z. Bao, Nat.
M. Khine, J. Kim, J. Wang, J. Kim, Lab Chip 2018, 18, 217. Mater. 2010, 9, 859.
[2] A. Chortos, J. Liu, Z. Bao, Nat. Mater. 2016, 15, 937. [37] Q. Liu, Z. Liu, C. Li, K. Xie, P. Zhu, B. Shao, J. Zhang, J. Yang,
[3] S. Chen, L. Sun, X. Zhou, Y. Guo, J. Song, S. Qian, Z. Liu, Q. Guan, J. Zhang, Q. Wang, C. F. Guo, Adv. Sci. 2020, 7, 2000348.
E. Meade Jeffries, W. Liu, Y. Wang, C. He, Z. You, Nat. Commun. [38] C. Pang, J. H. Koo, A. Nguyen, J. M. Caves, M. G. Kim, A. Chortos,
2020, 11, 1107. K. Kim, P. J. Wang, J. B. H. Tok, Z. Bao, Adv. Mater. 2015, 27, 634.
[4] Y. Liu, M. Pharr, G. A. Salvatore, ACS Nano 2017, 11, 9614. [39] Y. Guo, S. Gao, W. Yue, C. Zhang, Y. Li, ACS Appl. Mater. Interfaces
[5] S. Yao, L. Vargas, X. Hu, Y. Zhu, IEEE Sens. J. 2018, 18, 3010. 2019, 11, 48594.
[6] R. Dahiya, N. Yogeswaran, F. Liu, L. Manjakkal, E. Burdet, [40] G. Liang, Y. Wang, D. Mei, K. Xi, Z. Chen, J. Microelectromech. Syst.
V. Hayward, H. Jorntell, Proc. IEEE 2019, 107, 2016. 2015, 24, 1510.
[7] A. Gallace, C. Spence, In Touch with the Future: The Sense of Touch [41] B. Zhuo, S. Chen, M. Zhao, X. Guo, IEEE J. Electron Devices Soc.
from Cognitive Neuroscience to Virtual Reality, Oxford University 2017, 5, 219.
Press, Oxford, UK 2014. [42] H. K. Lee, S. Il Chang, E. Yoon, J. Microelectromech. Syst. 2006, 15,
[8] Y. Wan, Y. Wang, C. F. Guo, Mater. Today Phys. 2017, 1, 61. 1681.
[9] J. Y. Oh, Z. Bao, Adv. Sci. 2019, 6, 1900186. [43] H. K. Lee, S. Il Chang, E. Yoon, IEEE Sens. J. 2009, 9, 1748.
[10] X. Wang, L. Dong, H. Zhang, R. Yu, C. Pan, Z. L. Wang, Adv. Sci. [44] J. A. Dobrzynska, M. A. M. Gijs, Sens. Actuators, A 2012, 173, 127.
2015, 2, 1500169. [45] R. Li, B. Nie, C. Zhai, J. Cao, J. Pan, Y. W. Chi, T. Pan, Ann. Biomed.
[11] X. Zeng, Z. Wang, H. Zhang, W. Yang, L. Xiang, Z. Zhao, Eng. 2016, 44, 2282.
L. M. Peng, Y. Hu, ACS Appl. Mater. Interfaces 2019, 11, 21218. [46] H. H. Chou, A. Nguyen, A. Chortos, J. W. F. To, C. Lu, J. Mei,
[12] M. S. Cao, X. X. Wang, M. Zhang, W. Q. Cao, X. Y. Fang, J. Yuan, T. Kurosawa, W. G. Bae, J. B. H. Tok, Z. Bao, Nat. Commun. 2015,
Adv. Mater. 2020, 32, 1907156. 6, 8011.
[13] S. Takamatsu, T. Lonjaret, E. Ismailova, A. Masuda, T. Itoh, [47] B. Y. Lee, J. Kim, H. Kim, C. Kim, S. D. Lee, Sens. Actuators, A 2016,
G. G. Malliaras, Adv. Mater. 2016, 28, 4485. 240, 103.
[14] J. Lee, H. Kwon, J. Seo, S. Shin, J. H. Koo, C. Pang, S. Son, [48] C. C. Kim, H. H. Lee, K. H. Oh, J. Y. Sun, Science 2016, 353, 682.
J. H. Kim, Y. H. Jang, D. E. Kim, T. Lee, Adv. Mater. 2015, 27, 2433. [49] A. D. Mazzeo, W. B. Kalb, L. Chan, M. G. Killian, J. F. Bloch,
[15] R. Dahiya, Proc. IEEE 2019, 107, 247. B. A. Mazzeo, G. M. Whitesides, Adv. Mater. 2012, 24, 2850.
[16] L. Beccai, C. Lucarotti, M. Totaro, M. Taghavi, in Soft Robotics: [50] R. Shi, Z. Lou, S. Chen, G. Shen, Sci. China Mater. 2018, 61, 1587.
Trends, Applications and Challenges (Eds: C. Laschi, J. Rossiter, [51] M. Li, J. Liang, X. Wang, M. Zhang, Sensors 2020, 20, 371.
F. Iida, M. Cianchetti, L. Margheri), Springer, Cham, Switzerland 2017. [52] J. Il Yoon, K. S. Choi, S. P. Chang, Microelectron. Eng. 2017, 179, 60.
[17] Z. Lei, P. Wu, Mater. Horiz. 2019, 6, 538. [53] L. Xie, P. Chen, S. Chen, K. Yu, H. Sun, Sensors 2019, 19, 3427.
[18] Y. Ma, Y. Zhang, S. Cai, Z. Han, X. Liu, F. Wang, Y. Cao, Z. Wang, [54] X. H. Hu, X. Zhang, M. Liu, Y. F. Chen, P. Li, W. H. Pei, C. Zhang,
H. Li, Y. Chen, X. Feng, Adv. Mater. 2020, 32, 1902062. H. D. Chen, Sci. China Inf. Sci. 2014, 57, 120204.
[19] M. L. Hammock, A. Chortos, B. C. K. Tee, J. B. H. Tok, Z. Bao, Adv. [55] Y. Wan, Z. Qiu, Y. Hong, Y. Wang, J. Zhang, Q. Liu, Z. Wu,
Mater. 2013, 25, 5997. C. F. Guo, Adv. Electron. Mater. 2018, 4, 1700586.
[20] M. G. Broadhurst, G. T. Davis, Ferroelectrics 1984, 60, 3. [56] J. Park, Y. Lee, M. H. Barbee, S. Cho, S. Cho, R. Shanker, J. Kim,
[21] M. Wegener, W. Wirges, R. Gerhard-Multhaupt, Adv. Eng. Mater. J. Myoung, M. P. Kim, C. Baig, S. L. Craig, H. Ko, Adv. Mater. 2019,
2005, 7, 1128. 31, 1808148.
[22] X. Zhang, J. Hillenbrand, G. M. Sessler, J. Appl. Phys. 2007, 101, [57] Y. Xiong, Y. Shen, L. Tian, Y. Hu, P. Zhu, R. Sun, C. P. Wong, Nano
054114. Energy 2020, 70, 104436.

Adv. Mater. 2021, 33, 2008267 2008267 (27 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

[58] W. Yang, N. W. Li, S. Zhao, Z. Yuan, J. Wang, X. Du, B. Wang, [91] L. Beker, N. Matsuhisa, I. You, S. R. A. Ruth, S. Niu, A. Foudeh,
R. Cao, X. Li, W. Xu, Z. L. Wang, C. Li, Adv. Mater. Technol. 2018, J. B. H. Tok, X. Chen, Z. Bao, Proc. Natl. Acad. Sci. USA 2020, 117,
3, 1700241. 11314.
[59] C. G. Núñez, W. T. Navaraj, E. O. Polat, R. Dahiya, Adv. Funct. [92] W. Deng, X. Huang, W. Chu, Y. Chen, L. Mao, Q. Tang, W. Yang,
Mater. 2017, 27, 1606287. J. Sens. 2016, 2016, 2428305.
[60] H. Jang, H. Yoon, Y. Ko, J. Choi, S. S. Lee, I. Jeon, J. H. Kim, [93] G. Y. Bae, J. T. Han, G. Lee, S. Lee, S. W. Kim, S. Park, J. Kwon,
H. Kim, Nanoscale 2016, 8, 5667. S. Jung, K. Cho, Adv. Mater. 2018, 30, 1803388.
[61] L. Viry, A. Levi, M. Totaro, A. Mondini, V. Mattoli, B. Mazzolai, [94] S. Park, H. Kim, M. Vosgueritchian, S. Cheon, H. Kim, J. H. Koo,
L. Beccai, Adv. Mater. 2014, 26, 2659. T. R. Kim, S. Lee, G. Schwartz, H. Chang, Z. Bao, Adv. Mater. 2014,
[62] H. Z. Zhang, Q. Y. Tang, Y. C. Chan, AIP Adv. 2012, 2, 022112. 26, 7324.
[63] D. Son, J. Kang, O. Vardoulis, Y. Kim, N. Matsuhisa, J. Y. Oh, [95] S. Zhao, W. Ran, D. Wang, R. Yin, Y. Yan, K. Jiang, Z. Lou, G. Shen,
J. W. To, J. Mun, T. Katsumata, Y. Liu, A. F. McGuire, M. Krason, ACS Appl. Mater. Interfaces 2020, 12, 32023.
F. Molina-Lopez, J. Ham, U. Kraft, Y. Lee, Y. Yun, J. B. H. Tok, [96] Y. Gao, G. Yu, T. Shu, Y. Chen, W. Yang, Y. Liu, J. Long, W. Xiong,
Z. Bao, Nat. Nanotechnol. 2018, 13, 1057. F. Xuan, Adv. Mater. Technol. 2019, 4, 1900504.
[64] C. Larson, B. Peele, S. Li, S. Robinson, M. Totaro, L. Beccai, [97] B. Nie, R. Li, J. Cao, J. D. Brandt, T. Pan, Adv. Mater. 2015, 27, 6055.
B. Mazzolai, R. Shepherd, Science 2016, 351, 1071. [98] S. R. A. Ruth, V. R. Feig, H. Tran, Z. Bao, Adv. Funct. Mater. 2020,
[65] D. Kwon, T. I. Lee, J. Shim, S. Ryu, M. S. Kim, S. Kim, T. S. Kim, 30, 2003491.
I. Park, ACS Appl. Mater. Interfaces 2016, 8, 16922. [99] C. L. Choong, M. B. Shim, B. S. Lee, S. Jeon, D. S. Ko, T. H. Kang,
[66] M. Ntagios, H. Nassar, A. Pullanchiyodan, W. T. Navaraj, J. Bae, S. H. Lee, K. E. Byun, J. Im, Y. J. Jeong, C. E. Park, J. J. Park,
R. Dahiya, Adv. Intell. Syst. 2020, 2, 1900080. U. I. Chung, Adv. Mater. 2014, 26, 3451.
[67] S. R. A. Ruth, L. Beker, H. Tran, V. R. Feig, N. Matsuhisa, Z. Bao, [100] H. Kim, G. Kim, T. Kim, S. Lee, D. Kang, M. S. Hwang, Y. Chae,
Adv. Funct. Mater. 2019, 30, 1903100. S. Kang, H. Lee, H. G. Park, W. Shim, Small 2018, 14, 1703432.
[68] A. Fassler, C. Majidi, Smart Mater. Struct. 2013, 22, 055023. [101] B. C. K. Tee, A. Chortos, R. R. Dunn, G. Schwartz, E. Eason,
[69] M. Ying, A. P. Bonifas, N. Lu, Y. Su, R. Li, H. Cheng, A. Ameen, Z. Bao, Adv. Funct. Mater. 2014, 24, 5427.
Y. Huang, J. A. Rogers, Nanotechnology 2012, 23, 344004. [102] Y. Zhang, Y. Hu, P. Zhu, F. Han, Y. Zhu, R. Sun, C. P. Wong, ACS
[70] A. Atalay, V. Sanchez, O. Atalay, D. M. Vogt, F. Haufe, R. J. Wood, Appl. Mater. Interfaces 2017, 9, 35968.
C. J. Walsh, Adv. Mater. Technol. 2017, 2, 1700136. [103] S. Peng, P. Blanloeuil, S. Wu, C. H. Wang, Adv. Mater. Interfaces
[71] J. Choi, D. Kwon, K. Kim, J. Park, D. Del Orbe, J. Gu, J. Ahn, I. Cho, 2018, 5, 1870088.
Y. Jeong, Y. Oh, I. Park, ACS Appl. Mater. Interfaces 2020, 12, 1698. [104] G. Yu, J. Hu, J. Tan, Y. Gao, Y. Lu, F. Xuan, Nanotechnology 2018,
[72] Z. Yuan, G. Shen, C. Pan, Z. L. Wang, Nano Energy 2020, 73, 29, 115502.
104764. [105] S. Luo, J. Yang, X. Song, X. Zhou, L. Yu, T. Sun, C. Yu, D. Huang,
[73] T. Y. Choi, B. U. Hwang, B. Y. Kim, T. Q. Trung, Y. H. Nam, C. Du, D. Wei, Solid-State Electron. 2018, 145, 29.
D. N. Kim, K. Eom, N. E. Lee, ACS Appl. Mater. Interfaces 2017, 9, [106] W. Cheng, J. Wang, Z. Ma, K. Yan, Y. Wang, H. Wang, S. Li, Y. Li,
18022. L. Pan, Y. Shi, IEEE Electron Device Lett. 2018, 39, 288.
[74] C. M. Boutry, M. Negre, M. Jorda, O. Vardoulis, A. Chortos, [107] B. He, Z. Yan, Y. Zhou, J. Zhou, Q. Wang, Z. Wang, J. Micromech.
O. Khatib, Z. Bao, Sci. Rob. 2018, 3, eaau6914. Microeng. 2018, 28, 105001.
[75] H. Vandeparre, D. Watson, S. P. Lacour, Appl. Phys. Lett. 2013, 103, [108] Y. Joo, J. Byun, N. Seong, J. Ha, H. Kim, S. Kim, T. Kim, H. Im,
204103. D. Kim, Y. Hong, Nanoscale 2015, 7, 6208.
[76] X. Zhang, S. Hu, M. Wang, J. Yu, Q. Khan, J. Shang, L. Ba, Nano- [109] C. M. Boutry, A. Nguyen, Q. O. Lawal, A. Chortos,
technology 2015, 26, 115501. S. Rondeau-Gagné, Z. Bao, Adv. Mater. 2015, 27, 6954.
[77] L. Wang, IEEE Electron Device Lett. 2017, 38, 123. [110] S. Y. Kim, S. Park, H. W. Park, D. H. Park, Y. Jeong, D. H. Kim, Adv.
[78] F. B. Madsen, A. E. Daugaard, S. Hvilsted, A. L. Skov, Macromol. Mater. 2015, 27, 4178.
Rapid Commun. 2016, 37, 378. [111] D. H. Ho, Q. Sun, S. Y. Kim, J. T. Han, D. H. Kim, J. H. Cho, Adv.
[79] M. I. Tiwana, S. J. Redmond, N. H. Lovell, Sens. Actuators, A 2012, Mater. 2016, 28, 2601.
179, 17. [112] Z. Zhu, R. Li, T. Pan, Adv. Mater. 2018, 30, 1705122.
[80] N. Q. Balaban, U. S. Schwarz, D. Riveline, P. Goichberg, G. Tzur, [113] W. Asghar, F. Li, Y. Zhou, Y. Wu, Z. Yu, S. Li, D. Tang, X. Han,
I. Sabanay, D. Mahalu, S. Safran, A. Bershadsky, L. Addadi, J. Shang, Y. Liu, R. W. Li, Adv. Mater. Technol. 2020, 5, 1900934.
B. Geiger, Nat. Cell Biol. 2001, 3, 466. [114] J. Yang, S. Luo, X. Zhou, J. Li, J. Fu, W. Yang, D. Wei, ACS Appl.
[81] A. Rana, J. P. Roberge, V. Duchaine, IEEE Sens. J. 2016, 16, 7853. Mater. Interfaces 2019, 11, 14997.
[82] X. Shuai, P. Zhu, W. Zeng, Y. Hu, X. Liang, Y. Zhang, R. Sun, [115] H. Han, S. Baik, B. Xu, J. Seo, S. Lee, S. Shin, J. Lee, J. H. Koo,
C. P. Wong, ACS Appl. Mater. Interfaces 2017, 9, 26314. Y. Mei, C. Pang, T. Lee, Adv. Funct. Mater. 2017, 27, 170618.
[83] J. He, Y. Zhang, R. Zhou, L. Meng, T. Chen, W. Mai, C. Pan, J. [116] Q. Zhou, B. Ji, Y. Wei, B. Hu, Y. Gao, Q. Xu, J. Zhou, B. Zhou,
Mater. 2020, 6, 86. J. Mater. Chem. A 2019, 7, 27334.
[84] T. Li, H. Luo, L. Qin, X. Wang, Z. Xiong, H. Ding, Y. Gu, Z. Liu, [117] S. Sterbing-D’Angelo, M. Chadha, C. Chiu, B. Falk, W. Xian,
T. Zhang, Small 2016, 12, 5042. J. Barcelo, J. M. Zook, C. F. Moss, Proc. Natl. Acad. Sci. USA 2011,
[85] I. Clausen, T. Glott, Sensors 2014, 14, 17686. 108, 11291.
[86] D. P. J. Cotton, I. M. Graz, S. P. Lacour, IEEE Sens. J. 2009, 9, 2008. [118] Y. M. Song, Y. Xie, V. Malyarchuk, J. Xiao, I. Jung, K. J. Choi,
[87] H. Jin, S. Jung, J. Kim, S. Heo, J. Lim, W. Park, H. Y. Chu, F. Bien, Z. Liu, H. Park, C. Lu, R. H. Kim, R. Li, K. B. Crozier, Y. Huang,
K. Park, Sci. Rep. 2017, 7, 10854. J. A. Rogers, Nature 2013, 497, 95.
[88] D. J. Cohen, D. Mitra, K. Peterson, M. M. Maharbiz, Nano Lett. [119] J. Park, Y. Y. Lee, J. Hong, Y. Y. Lee, M. Ha, Y. Jung, H. Lim,
2012, 12, 1821. S. Y. Kim, H. Ko, ACS Nano 2014, 8, 12020.
[89] J. Yuan, A. Luna, W. Neri, C. Zakri, A. Colin, P. Poulin, ACS Nano [120] A. A. Blandin, I. Bernardeschi, L. Beccai, Biomimetics 2018, 3, 32.
2018, 12, 1688. [121] T. Takahashi, M. Suzuki, S. Iwamotoi, S. Aoyagi, Micromachines
[90] H. Charaya, T. G. La, J. Rieger, H. J. Chung, Adv. Mater. Technol. 2012, 3, 270.
2019, 4, 1900327. [122] M. Y. Cheng, C. L. Lin, Y. T. Lai, Y. J. Yang, Sensors 2010, 10, 10211.

Adv. Mater. 2021, 33, 2008267 2008267 (28 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

[123] A. A. Blandin, M. Totaro, I. Bernardeschi, in Conference on Bio- [153] T. Yang, D. Xie, Z. Li, H. Zhu, Mater. Sci. Eng., R 2017, 115, 1.
mimetic and Biohybrid Systems, Living Machines 2017, Vol. 10384 [154] T. Q. Trung, N. E. Lee, Adv. Mater. 2016, 28, 4338.
(Eds: M. Mangan, M. Cutkosky, A. Mura, P. F. M. J. Verschure, [155] M. X. Wang, Y. M. Chen, Y. Gao, C. Hu, J. Hu, L. Tan, Z. Yang, ACS
T. Prescott, N. Lepora), Springer, Cham, Switzerland 2017, Appl. Mater. Interfaces 2018, 10, 26610.
pp. 25–34. [156] S. Chung, J. Lee, H. Song, S. Kim, J. Jeong, Y. Hong, Appl. Phys.
[124] S. Miller, Z. Bao, J. Mater. Res. 2015, 30, 3584. Lett. 2011, 98, 153110.
[125] S. Kang, J. Lee, S. Lee, S. G. Kim, J. K. Kim, H. Algadi, S. Al-Sayari, [157] N. Gao, X. Zhang, S. Liao, H. Jia, Y. Wang, ACS Macro Lett. 2016,
D. E. Kim, D. E. Kim, T. Lee, Adv. Electron. Mater. 2016, 2, 1600356. 5, 823.
[126] J. O. Kim, S. Y. Kwon, Y. Kim, H. B. Choi, J. C. Yang, J. Oh, [158] S. Baek, H. Jang, S. Y. Kim, H. Jeong, S. Han, Y. Jang, D. H. Kim,
H. S. Lee, J. Y. Sim, S. Ryu, S. Park, ACS Appl. Mater. Interfaces H. S. Lee, RSC Adv. 2017, 7, 39420.
2019, 11, 1503. [159] O. Atalay, A. Atalay, J. Gafford, H. Wang, R. Wood, C. Walsh, Adv.
[127] F. Cote, R. Biagi, H. Bart-Smith, V. S. Deshpande, Int. J. Solids Mater. Technol. 2017, 2, 1700081.
Struct. 2007, 44, 3533. [160] T. Pickering, J. M. Hamm, A. F. Page, S. Wuestner, O. Hess, Nat.
[128] P. Wei, X. Guo, X. Qiu, D. Yu, Nanotechnology 2019, 30, 455501. Commun. 2014, 5, 4972.
[129] S. Wan, H. Bi, Y. Zhou, X. Xie, S. Su, K. Yin, L. Sun, Carbon 2017, [161] Y. Su, X. Ping, K. J. Yu, J. W. Lee, J. A. Fan, B. Wang, M. Li, R. Li,
114, 209. D. V. Harburg, Y. A. Huang, C. Yu, S. Mao, J. Shim, Q. Yang,
[130] Y. N. Zheng, Z. Yu, G. Mao, Y. Li, D. Pravarthana, W. Asghar, Y. Liu, P. Y. Lee, A. Armonas, K. J. Choi, Y. Yang, U. Paik, T. Chang,
S. Qu, J. Shang, R. W. Li, Global Challenges 2020, 4, 1900079. T. J. Dawidczyk, Y. A. Huang, S. Wang, J. A. Rogers, Adv. Mater.
[131] C. Metzger, E. Fleisch, J. Meyer, M. Dansachmüller, I. Graz, 2017, 29, 1604989.
M. Kaltenbrunner, C. Keplinger, R. Schwödiauer, S. Bauer, Appl. [162] F. Xu, W. Lu, Y. Zhu, ACS Nano 2011, 5, 672.
Phys. Lett. 2008, 92, 2006. [163] Y. Sun, V. Kumar, I. Adesida, J. A. Rogers, Adv. Mater. 2006, 18,
[132] S. Chen, B. Zhuo, X. Guo, ACS Appl. Mater. Interfaces 2016, 8, 2857.
20364. [164] N. Bowden, S. Brittain, A. G. Evans, J. W. Hutchinson,
[133] J. Tao, M. Dong, L. Li, C. Wang, J. Li, Y. Liu, R. Bao, C. Pan, G. M. Whitesides, Nature 1998, 393, 146.
Microsyst. Nanoeng. 2020, 6, 62. [165] D. S. Gray, J. Tien, C. S. Chen, Adv. Mater. 2004, 16, 393.
[134] C. Pang, G. Y. Lee, T. Il Kim, S. M. Kim, H. N. Kim, S. H. Ahn, [166] Y. Wang, Q. Liu, J. Zhang, T. Hong, W. Sun, L. Tang, E. Arnold,
K. Y. Suh, Nat. Mater. 2012, 11, 795. Z. Suo, W. Hong, Z. Ren, C. F. Guo, Adv. Mater. 2019, 31, 1902955.
[135] B. Zhu, Z. Niu, H. H. Wang, W. R. Leow, H. H. Wang, Y. Li, [167] S. Chen, K. Jiang, Z. Lou, D. Chen, G. Shen, Adv. Mater. Technol.
L. Zheng, J. Wei, F. Huo, X. Chen, Small 2014, 10, 3625. 2018, 3, 1700248.
[136] G. Schwartz, B. C. K. Tee, J. Mei, A. L. Appleton, D. H. Kim, [168] J. A. Rogers, R. Ghaffari, D. H. Kim, Stretchable Bioelectronics for
H. Wang, Z. Bao, Nat. Commun. 2013, 4, 6954. Medical Devices and Systems, Springer, Cham 2016.
[137] S. Peng, S. Wu, Y. Yu, B. Xia, N. Lovell, C. H. Wang, ACS Appl. [169] S. Zhao, J. Li, D. Cao, G. Zhang, J. Li, K. Li, Y. Yang, W. Wang, Y. Jin,
Mater. Interfaces 2020, 12, 22179. R. Sun, C. P. Wong, ACS Appl. Mater. Interfaces 2017, 9, 12147.
[138] S. P. Lacour, S. Benmerah, E. Tarte, J. Fitzgerald, J. Serra, [170] M. Watanabe, H. Shirai, T. Hirai, J. Appl. Phys. 2002, 92, 4631.
S. McMahon, J. Fawcett, O. Graudejus, Z. Yu, B. Morrison, Med. [171] Z. Y. Huang, W. Hong, Z. Suo, J. Mech. Phys. Solids 2005, 53, 2101.
Biol. Eng. Comput. 2010, 48, 945. [172] J. Song, H. Jiang, Z. J. Liu, D. Y. Khang, Y. Huang, J. A. Rogers,
[139] Y. Wan, Z. Qiu, J. Huang, J. Yang, Q. Wang, P. Lu, J. Yang, J. Zhang, C. Lu, C. G. Koh, Int. J. Solids Struct. 2008, 45, 3107.
S. Huang, Z. Wu, C. F. Guo, Small 2018, 14, 1801657. [173] J. Jeong, S. Kim, J. Cho, Y. Hong, IEEE Electron Device Lett. 2009,
[140] L. Wang, K. Wang, Z. Lou, K. Jiang, G. Shen, Adv. Funct. Mater. 30, 1284.
2018, 28, 1804501. [174] M. Benslimane, P. Gravesen, P. Sommer-Larsen, Proc. SPIE 2002,
[141] L. Feng, S. Li, Y. Li, H. Li, L. Zhang, J. Zhai, Y. Song, B. Liu, 4695, 150.
L. Jiang, D. Zhu, Adv. Mater. 2002, 14, 1857. [175] M. Benslimane, H.-E. Kiil, M. J. Tryson, Proc. SPIE 2010, 7642,
[142] C. Mahata, H. Algadi, J. Lee, S. Kim, T. Lee, Measurement 2020, 764231.
151, 107095. [176] D. C. Duffy, J. C. McDonald, O. J. A. Schueller, G. M. Whitesides,
[143] S. Rachel, A. Ruth, Z. Bao, ACS Appl. Mater. Interfaces 2020, 12, Anal. Chem. 1998, 70, 4974.
58301. [177] Y. Sun, J. A. Rogers, Nano Lett. 2004, 4, 1953.
[144] J. C. Yang, J. O. Kim, J. Oh, S. Y. Kwon, J. Y. Sim, D. W. Kim, [178] Y. Y. Huang, W. Zhou, K. J. Hsia, E. Menard, J. U. Park, J. A. Rogers,
H. B. Choi, S. Park, ACS Appl. Mater. Interfaces 2019, 11, 19472. A. G. Alleyne, Langmuir 2005, 21, 8058.
[145] Y. Shu, H. Tian, Y. Yang, C. Li, Y. Cui, W. Mi, Y. Li, Z. Wang, [179] Y. Sun, W. M. Choi, H. Jiang, Y. Y. Huang, J. A. Rogers, Nat. Nano-
N. Deng, B. Peng, T. L. Ren, Nanoscale 2015, 7, 8636. technol. 2006, 1, 201.
[146] Y. Luo, J. Shao, S. Chen, X. Chen, H. Tian, X. Li, L. Wang, D. Wang, [180] D. Y. Y. Khang, H. Jiang, Y. Huang, J. A. Rogers, Science 2006, 311,
B. Lu, ACS Appl. Mater. Interfaces 2019, 11, 17796. 208.
[147] T. Sekitani, H. Nakajima, H. Maeda, T. Fukushima, T. Aida, [181] H. Jiang, D. Y. Khang, J. Song, Y. Sun, Y. Huang, J. A. Rogers, Proc.
K. Hata, T. Someya, Nat. Mater. 2009, 8, 494. Natl. Acad. Sci. USA 2007, 104, 15607.
[148] T. Fukushima, A. Kosaka, Y. Ishimura, T. Yamamoto, T. Takigawa, [182] J. Kim, E. F. Chou, J. Le, S. Wong, M. Chu, M. Khine, Adv. Health-
N. Ishii, T. Aida, Science 2003, 300, 2072. care Mater. 2019, 8, 1900109.
[149] W. Cheng, L. Yu, D. Kong, Z. Yu, H. Wang, Z. Ma, Y. Wang, [183] L. Ma, X. Shuai, Y. Hu, X. Liang, P. Zhu, R. Sun, C. P. Wong,
J. Wang, L. Pan, Y. Shi, IEEE Electron Device Lett. 2018, 39, J. Mater. Chem. C 2018, 6, 13232.
1069. [184] S. Chen, S. Peng, W. Sun, G. Gu, Q. Zhang, X. Guo, Adv. Mater.
[150] M. Y. Cheng, X. H. Huang, C. W. Ma, Y. J. Yang, J. Micromech. Technol. 2019, 4, 1800681.
Microeng. 2009, 19, 115001. [185] W. M. Choi, J. Song, D. Y. Khang, H. Jiang, Y. Y. Huang,
[151] R. Li, Y. Si, Z. Zhu, Y. Guo, Y. Zhang, N. Pan, G. Sun, T. Pan, Adv. J. A. Rogers, Nano Lett. 2007, 7, 1655.
Mater. 2017, 29, 1700253. [186] Z. F. Liu, S. Fang, F. A. Moura, J. N. Ding, N. Jiang, J. Di, M. Zhang,
[152] J. Shi, S. Liu, L. Zhang, B. Yang, L. Shu, Y. Yang, M. Ren, Y. Wang, X. Lepró, D. S. Galvão, C. S. Haines, N. Y. Yuan, S. G. Yin,
J. Chen, W. Chen, Y. Chai, X. Tao, Adv. Mater. 2020, 32, 1901958. D. W. Lee, R. Wang, H. Y. Wang, W. Lv, C. Dong, R. C. Zhang,

Adv. Mater. 2021, 33, 2008267 2008267 (29 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

M. J. Chen, Q. Yin, Y. T. Chong, R. Zhang, X. Wang, M. D. Lima, [209] Q. Hua, J. Sun, H. Liu, R. Bao, R. Yu, J. Zhai, C. Pan, Z. L. Wang,
R. Ovalle-Robles, D. Qian, H. Lu, R. H. Baughman, Science 2015, Nat. Commun. 2018, 9, 244.
349, 400. [210] D. H. Kim, J. H. Ahn, M. W. Choi, H. S. Kim, T. H. Kim, J. Z. Song,
[187] Y. Wei, S. Chen, X. Yuan, P. Wang, L. Liu, Adv. Funct. Mater. 2016, Y. Huang, Z. J. Liu, C. Lu, J. A. Rogers, Science 2008, 320, 507.
26, 5078. [211] C. F. Guo, T. Sun, Q. Liu, Z. Suo, Z. Ren, Nat. Commun. 2014, 5,
[188] F. Arab Hassani, H. Jin, T. Yokota, T. Someya, N. V. Thakor, Sci. 3121.
Adv. 2020, 6, eaba0412. [212] A. P. Gerratt, H. O. Michaud, S. P. Lacour, Adv. Funct. Mater. 2015,
[189] D. H. Kim, J. A. Rogers, Adv. Mater. 2008, 20, 4887. 25, 2287.
[190] S. Kim, S. Choi, E. Oh, J. Byun, H. Kim, B. Lee, S. Lee, Y. Hong, [213] C. B. Cooper, K. Arutselvan, Y. Liu, D. Armstrong, Y. Lin,
Sci. Rep. 2016, 6, 34632. M. R. Khan, J. Genzer, M. D. Dickey, Adv. Funct. Mater. 2017, 27,
[191] D. H. Kim, J. Song, M. C. Won, H. S. Kim, R. H. Kim, Z. Liu, 1605630.
Y. Y. Huang, K. C. Hwang, Y. W. Zhang, J. A. Rogers, Proc. Natl. [214] Y. Cheng, R. Wang, H. Zhai, J. Sun, Nanoscale 2017, 9, 3834.
Acad. Sci. USA 2008, 105, 18675. [215] L. Wang, J. A. Jackman, E. L. Tan, J. H. Park, M. G. Potroz,
[192] D. J. Lipomi, B. C. K. Tee, M. Vosgueritchian, Z. Bao, Adv. Mater. E. T. Hwang, N. J. Cho, Nano Energy 2017, 36, 38.
2011, 23, 1771. [216] Z. Yang, Y. Pang, X. L. Han, Y. Yang, Y. Yang, J. Ling, M. Jian,
[193] Y. Kim, A. Chortos, W. Xu, Y. Liu, J. Y. Oh, D. Son, J. Kang, Y. Zhang, T. L. Ren, ACS Nano 2018, 12, 9134.
A. M. Foudeh, C. Zhu, Y. Lee, S. Niu, J. Liu, R. Pfattner, Z. Bao, [217] S. Lee, A. Reuveny, J. Reeder, S. Lee, H. Jin, Q. Liu, T. Yokota,
T. W. Lee, Science 2018, 360, 998. T. Sekitani, T. Isoyama, Y. Abe, Z. Suo, T. Someya, Nat. Nano-
[194] Y. Cho, J. H. Shin, A. Costa, T. A. Kim, V. Kunin, J. Li, S. Y. Lee, technol. 2016, 11, 472.
S. Yang, H. N. Han, I. S. Choi, D. J. Srolovitz, Proc. Natl. Acad. Sci. [218] Y. Li, Y. A. Samad, T. Taha, G. Cai, S. Y. Fu, K. Liao, ACS Sustainable
USA 2014, 111, 17390. Chem. Eng. 2016, 4, 4288.
[195] Y. Su, J. Wu, Z. Fan, K. C. Hwang, J. Song, Y. Huang, J. A. Rogers, [219] S. Gong, W. Schwalb, Y. Wang, Y. Chen, Y. Tang, J. Si,
J. Mech. Phys. Solids 2012, 60, 487. B. Shirinzadeh, W. Cheng, Nat. Commun. 2014, 5, 3132.
[196] J. A. Fan, W. H. Yeo, Y. Su, Y. Hattori, W. Lee, S. Y. Jung, Y. Zhang, [220] F. Wang, S. Liu, L. Shu, X. M. Tao, Carbon 2017, 121, 353.
Z. Liu, H. Cheng, L. Falgout, M. Bajema, T. Coleman, D. Gregoire, [221] H. Jin, M. O. G. Nayeem, S. Lee, N. Matsuhisa, D. Inoue,
R. J. Larsen, Y. Huang, J. A. Rogers, Nat. Commun. 2014, 5, 3266. T. Yokota, D. Hashizume, T. Someya, ACS Nano 2019, 13, 7905.
[197] S. Huang, Y. Liu, Y. Zhao, Z. Ren, C. F. Guo, Adv. Funct. Mater. [222] H. Zhao, L. Hou, J. X. Wu, Y. X. Lu, J. Mater. Chem. C 2016, 4, 7156.
2019, 29, 1805924. [223] Y. Liu, S. Gorgutsa, C. Santato, M. Skorobogatiy, J. Electrochem.
[198] S. Gong, W. Cheng, Adv. Electron. Mater. 2017, 3, 1600314. Soc. 2012, 159, A349.
[199] J. A. Rogers, T. Someya, Y. Huang, J. A. Rogers, T. Someya, [224] B. He, Y. Zhou, Z. Wang, Q. Wang, R. Shen, S. Wu, Sens. Actuators,
Y. Huang, Science 2010, 327, 1603. A 2018, 272, 341.
[200] T. Pan, M. Pharr, Y. Ma, R. Ning, Z. Yan, R. Xu, X. Feng, Y. Huang, [225] A. Schmitz, P. Maiolino, M. Maggiali, L. Natale, G. Cannata,
J. A. Rogers, Adv. Funct. Mater. 2017, 27, 1702589. G. Metta, IEEE Trans. Rob. 2011, 27, 389.
[201] Y. Zhang, S. Xu, H. Fu, J. Lee, J. Su, K. C. Hwang, J. A. Rogers, [226] T. Q. Trung, N. E. Lee, Adv. Mater. 2017, 29, 1603167.
Y. Huang, Soft Matter 2013, 9, 8062. [227] H. B. Lee, C. W. Bae, L. T. Duy, I. Y. Sohn, D. Il Kim, Y. J. Song,
[202] H. Wei, K. Li, W. G. Liu, H. Meng, P. X. Zhang, C. Y. Yan, Adv. Eng. Y. J. Kim, N. E. Lee, Adv. Mater. 2016, 28, 3069.
Mater. 2017, 19, 1700341. [228] Y. Cheng, R. Wang, J. Sun, L. Gao, Adv. Mater. 2015, 27, 7365.
[203] J. Kim, M. Lee, H. J. Shim, R. Ghaffari, H. R. Cho, D. Son, [229] S. H. Cho, S. W. Lee, S. Yu, H. Kim, S. Chang, D. Kang, I. Hwang,
Y. H. Jung, M. Soh, C. Choi, S. Jung, K. Chu, D. Jeon, S. T. Lee, H. S. Kang, B. Jeong, E. H. Kim, S. M. Cho, K. L. Kim, H. Lee,
J. H. Kim, S. H. Choi, T. Hyeon, D. H. Kim, Nat. Commun. 2014, W. Shim, C. Park, ACS Appl. Mater. Interfaces 2017, 9, 10128.
5, 5747. [230] J. Kim, T. N. Ng, W. S. Kim, Appl. Phys. Lett. 2012, 101, 103308.
[204] X. Zhao, Q. Hua, R. Yu, Y. Zhang, C. Pan, Adv. Electron. Mater. [231] K. F. Lei, K. F. Lee, M. Y. Lee, Microsyst. Technol. 2014, 20, 1351.
2015, 1, 1500142. [232] P. Maiolino, F. Galantini, F. Mastrogiovanni, G. Gallone,
[205] F. Xu, Y. Zhu, Adv. Mater. 2012, 24, 5117. G. Cannata, F. Carpi, Sens. Actuators, A 2015, 226, 37.
[206] J. W. Jeong, W. H. Yeo, A. Akhtar, J. J. S. Norton, Y. J. Kwack, S. Li, [233] O. Atalay, A. Atalay, J. Gafford, C. Walsh, Adv. Mater. Technol. 2018,
S. Y. Jung, Y. Su, W. Lee, J. Xia, H. Cheng, Y. Huang, W. S. Choi, 3, 1700237.
T. Bretl, J. A. Rogers, Adv. Mater. 2013, 25, 6839. [234] Z. Qiu, Y. Wan, W. Zhou, J. Yang, J. Yang, J. Huang, J. Zhang,
[207] W. H. Yeo, Y. S. Kim, J. Lee, A. Ameen, L. Shi, M. Li, S. Wang, Q. Liu, S. Huang, N. Bai, Z. Wu, W. Hong, H. Wang, C. F. Guo,
R. Ma, S. H. Jin, Z. Kang, Y. Huang, J. A. Rogers, Adv. Mater. 2013, Adv. Funct. Mater. 2018, 28, 1802343.
25, 2773. [235] L. Ma, X. Yu, Y. Yang, Y. Hu, X. Zhang, H. Li, X. Ouyang, P. Zhu,
[208] D. Son, J. Lee, S. Qiao, R. Ghaffari, J. Kim, J. E. Lee, C. Song, R. Sun, C. P. Wong, J. Mater. 2020, 6, 321.
S. J. Kim, D. J. Lee, S. W. Jun, S. Yang, M. Park, J. Shin, K. Do, [236] T. H. Park, S. Yu, S. H. Cho, H. S. Kang, Y. Kim, M. J. Kim, H. Eoh,
M. Lee, K. Kang, C. S. Hwang, N. Lu, T. Hyeon, D. H. Kim, Nat. C. Park, B. Jeong, S. W. Lee, D. Y. Ryu, J. Huh, C. Park, NPG Asia
Nanotechnol. 2014, 9, 397. Mater. 2018, 10, 328.

Adv. Mater. 2021, 33, 2008267 2008267 (30 of 31) © 2021 Wiley-VCH GmbH
 15214095, 2021, 34, Downloaded from https://onlinelibrary.wiley.com/doi/10.1002/adma.202008267 by INASP/HINARI - PAKISTAN, Wiley Online Library on [28/03/2024]. See the Terms and Conditions (https://onlinelibrary.wiley.com/terms-and-conditions) on Wiley Online Library for rules of use; OA articles are governed by the applicable Creative Commons License
www.advancedsciencenews.com www.advmat.de

Jing Qin is a postgraduate student in the School of Science, Beijing University of Posts and
Telecommunications, China. Her research interest is nanocomposite dielectrics for flexible and
stretchable capacitive sensors.

Ya-Nan Hao received her Ph.D. degree from Tsinghua University in 2016. She is now an associate
professor in Beijing University of Posts and Telecommunications. Her research interests are
focused on nanoscaled perovskite materials and their application in microelectronics and energy
storage, information functional materials, and devices.

Zhi-Min Dang received his Ph.D. degree in electrical engineering from Xi’an Jiaotong University in
2001. He is currently a professor in the Department of Electrical Engineering, Tsinghua University.
His research interests are advanced energy/electrical materials and devices. He has published
more than 270 journal papers with a current citation record of over 13 000 times and an H-index
of 59.

Adv. Mater. 2021, 33, 2008267 2008267 (31 of 31) © 2021 Wiley-VCH GmbH