Scribd
Upload
11 views1 page

Multiglide Feroform F36

Multiglide Feroform F36

Uploaded by

Andre Caetano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views1 page

Multiglide Feroform F36

Multiglide Feroform F36

Uploaded by

Andre Caetano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Kühne Industrie B.V.

Gildenstraat 11B, 3861 RG Nijkerk


Telefoon +31 (0)85 487 4800
www.kuhne-industrie.nl

Multiglide / F36
FEROFORM F36 has been developed as a general purpose wearing and bearing material for many industrial
applications offering low wear and friction rates.

FEROFORM F36 is normally used for dry operation but can also be used in wet applications.

Properties Units

Coefficient of Friction (DRY) - 0,14 – 0,18


Swell in Water @ 20°C % 1
Swell in Water @ 80°C % 3
Ultimate Compressive Strength MPa 340
Compressive Yield @ 68,9 MPa % 1,4
Normal Working Pressure MPa 85
Thermal Expansion Normal 10˙⁶/°C 41

Maximum Operating Temperature Continuous °C 200


Shear Strength MPa 105
Impact Strength kJ/m² 35
Bond Strength KN@ 6,4 thick 5
Hardness Brinell 46
Density g/cm³ 1,50

Availability:

Sheet: Size: 1220 x 1220 mm


Thickness: 1,6 – 100 mm

Tube: Length: 1200 mm


Minimum Inside diameter: Ø20 mm
Maximum Outside diameter: On request

KUHNE INDUSTRIE BV T. +31 (0)85 487 48 00


Gildenstraat 11b F. +31 (0)85 487 48 01
3861 RG Nijkerk E. [email protected]
W. www.kuhne-industrie.nl

You might also like