Government of Andhra Pradesh

COMMON SCHEDULE OF RATES

AS PER
A.P. REVISED STANDARD DATA
FOR THE YEAR 2024-25
(Effective from 1st June, 2024)

BOARD OF CHIEF ENGINEERS

 MASTER INDEX

Sl. Description Page No.

No. From To
1 Part-I (Water Resources Work Items) 1 46

2 Part-II (Roads & Bridge Work Items) 1 22

3 Part-IV (Public Health Work Items) 1 123

4 Part-III (Building Works)

a. Building Work Items 1 244

b. Electrical & Electro Mechanical Works) 1 413

5 Annexure - Latest G.O. on Seigniorage Charges 1 7

 Office of the Engineer-in-Chief (I.W),
Water Resources Department, 2nd Floor,
Jalasoudha Building, Irrigation Compound,
Governorpet, Vijayawada.

Procs.No. ENC(IW)/SE(P&M)/EE.1/DEE-3/AEE/ SoR 2024-25/Vol.1 dt: 28.06.2024.

Sub : Schedule of Rates for the year 2024-25 with basic rates (excluding GST) (as per A.P.
Revised Standard Data) -Part-I (Water Resources Dept. Works), Part-II (Road & Bridge
Works), Part-III (Buildings) and Part-IV (Public Health Works) approved – Printing &
Communication of SoRs - Reg.

Ref: 1. G.O.Ms.No.49, I&CAD (PW:Reforms)Dept., dt:02.03.2009.

2. Commissioner of Labour, Andhra Pradesh, Vijayawada vide Proceedings no.G /
197 /2024 dt.22.04.2024 under Minimum Wages Act, 1948.
3. ENC, PH&ME Dept., Tadepalli, Lr.No. 146/T4/SoR 2024-25 dt: 25.06.2024.
4. ENC (Admin & NDB), R&B Dept., Vijayawada Lr.No. SoR-II/ENC/DCE(R)/EE(TEC)/
DEE6/AEE2 /2022 dt: 21.06.2024.
5. CE (Buildings & RSW, NABARD & LWE), R&B Dept., Vijayawada Lr.No. SoR/
DCE(B&RSW)/EE-II(D&P)/DEE-II/AEE/2024 dt.26.06.2024.
6. T.O. Lr.No. ENC/IW/SE (P&M)/EE.I/DEE.3/AEE/SoR 2024-25/ Vol.I dt. 27.06.2024.
7. ENC (Admin & NDB), R&B Dept., Vijayawada Lr.No. SoR-II/ENC/DCE(R)/EE(TEC)/
DEE6/AEE2 /2024 dt: 28.06.2024.
8. ENC, PH&ME Dept., Tadepalli, Lr.No. 146/T4/SoR 2024-25 dt: 28.06.2024.
9. CE (Buildings & RSW, NABARD & LWE), R&B Dept., Vijayawada Lr.No. SoR/
DCE(B&RSW)/EE-II(D&P)/DEE-II/AEE/2024 dt.27.06.2024.
****
The Government have approved A.P. Revised Standard Data vide ref 1st cited. The
Schedule of Rates with basic rates (excluding GST) as per the A.P. Revised Standard Data for
the year 2024-25 is approved based on the following:
The ENC (R&B) vide ref. 4th cited has furnished the draft basic rates exclusive of
GST for Roads & Bridge items for the year 2024-25.
The Engineer-in-Chief, Public Health Department has furnished draft basic rates
exclusive of GST for Public Health works items and Public Health Materials vide ref 3 rd
cited.
For Water Resources Department work items, the regional Superintending
Engineers: SE, IC, Dowlaiswaram, SE, IC, Chittoor and SE, IC, Vijayawada have submitted the
draft basic rates of materials. The SE, IC, Guntur has furnished draft rates for Mechanical and
Workshop items. Accordingly, the draft rates for Water Resources Department are prepared.
The Labour wages are finalized based on the rates as recommended by regional
Superintending Engineers duly keeping in view of the minimum wages as declared by the
Commissioner, Labour Department vide ref 2nd cited.
Based on the above proposals, the draft Schedule of Rates for the Part-I (WR
items), Part-II (Roads & Bridge items), Part-III (Buildings) & Part-IV (PH items) are prepared
for the SoR year 2024-25 and placed before the Board of Chief Engineers (BoCEs) meeting
for approval. The BoCEs has reviewed and finalized the rates of above four parts during the
4th meeting of BoCE for finalizing the Annual SoR held on 26.06.2024 @ 03.30 PM in the
conference hall of the Engineer-in-Chief, Water Resources Department, Vijayawada.
The minutes containing the recommendations of the BoCEs, vide reference 5th
cited, are communicated to ENC (R&B), CE (Buildings) and ENC (PH) for updating the draft
rates.
Based on the minutes of meeting, the ENC (R&B) Admin, ENC (PH) and Chief
Engineer (Buildings) have furnished, vide references 6th, 7th and 8th cited above, the final
copies of PART-II, PART-IV and Part-III respectively for incorporating into SoR-2024-25.
The procedure for the adoption of Water Resources Department work items, lead
& lift charges (Common to all Departments) is shown in the Annexure-A of SoR.
The approved basic rates (excluding GST) are applicable to the data i.e., A.P.
Revised Standard Data approved by the Government vide G.O.1st cited.
For Roads & Bridge Works, the rates can be applied for MoRTH data as approved
in the G.O. Ms. No.2, Transport, Roads and Buildings (R-I) Dept., dt: 12.01.2015.
The lead & lift charges are common to all Engineering Departments. The detailed
calculations are incorporated in the Lead & lift chapter in the WR Works (Part-I) of A.P.
Revised Standard Data.
No other items other than the items communicated now by this office shall be
introduced in the SoR 2024-25.
The Heads of Department and Officers mentioned below are authorized to print
the Schedule of Rates for the year 2024-25. Unauthorized printing & selling of the SoR is
strictly prohibited.
Any correction in the approved rates by the BoCE is to be brought to the
notice of the BOCE.
 The Revised rates will come into force with effect from 1st June of 2024.
The receipt of the proceedings may be acknowledged in the 1st instance.

Encl: SoR 2024-25 Containing

Part-I (Water Resources Dept. works),
Part-II (Roads & Bridge works)
Part-III (Buildings) and
Part-IV (Public Health Items).
Sd/- R.Sathish Kumar, dt:28.06.2024
Engineer-in-Chief (AW/IW) &
Chairman, BoCEs,
Water Resources Department

1. Copy submitted to the Special Chief Secretary to Govt., Water Resources Dept., 4th Block, 1st
floor, A.P. Secretariat Buildings, Velagapudi, Amaravathi.
2. Copy communicated to the following Heads of Departments along with enclosures for
information.
1) Engineer-in-Chief (Admn)., Roads & Buildings Department.
2) Engineer-in-Chief, Public Health Department.
3) Engineer-in-Chief, Panchayath Raj Department.
4) Engineer-in-Chief, RWS, Department.
5) Chief Engineer (Buildings & RSW), R&B Department.
3. Copy of Scheduled of Rates 2024-25 with basic rates & Standard Data, Part-I (WR Dept.
works) communicated to the respective E-mail ids of all the Engineers-in-Chief, Chief
Engineers and Regional Superintending Engineers of Irrigation circles of Vijayawada, Guntur,
Dowlaiswaram and Chittoor of Water Resources Department for taking necessary action.
4. Copy to DEE (Computers), ENC (AW) for uploading the approved SoR-2024-25 (Part-I, Part-II,
Part-III & Part-IV) on the Water Resources Department website and to communicate this
proceedings to all the members of the Board of Chief Engineers through e-mail.

Sd/- R.Sathish Kumar, dt:28.06.2024

Engineer-in-Chief (AW/IW) &
Chairman, BoCEs,
Water Resources Department
 Important – Read The following

ANNEXURE- A

1) The SPIU (Irrigation), Centre for Good Governance (CGG), Hyderabad has developed
software package linking the basic input data of Irrigation with approved data of Water
Resources work items.
2) The lead and lift charges are common to all Engineering Departments. The detailed
calculations are incorporated in the Lead &Lift charges chapter in the Water Resources
Department works (Part-1) of A.P. Revised standard data.
3) The estimate sanctioning authority shall physically verify each and every Water
Resources work item data incorporated in the estimate with basic input data before
sanction of the estimate. Any lapses or arithmetic errors arising in the sanction of data
/estimate due to adoption of the software package lies entirely on the concerned estimate
sanctioning authority only.
4) Any discrepancies / corrections required for improper basic input data appearing in the
approved data of Water Resources work items in the software package and hard copy of
SoR & Standard Data (Part-1) may be brought to the notice of undersigned for issuing

corrections.

Sd/- R.Sathish Kumar, dt:28.06.2024

Engineer-in-Chief (AW/IW) &
Chairman, BoCEs,
Water Resources Department
 PART - I

(WATER RESOURCES
DEPARTMENT)
WORK ITEMS
 Index – WR Items (Part-I)

Page No.s
Sl. No. Description
From To
1 Preamble 1 4

2 Labour Rates 5 9

3 Material Rates 10 36

4 Conveyance Charges of Materials 37 41

5 Hire Charges of Machinery 42 46

PREAMBLE

1
PREAMBLE

1.0 AREA ALLOWANCES:

A) CORPORATIONS & MUNICIPALITIES:

a) (i) 25% extra over the rates on labour component of works is allowed in all Municipal
Corporation Limits of Andhra Pradesh except Greater Visakhapatnam and Vijayawada
municipal corporations (up to a belt of 12 Kms. from Municipal Corporation limits) and
other corporations as notified by the Government from time to time.

(ii) 40% extra over the rates on labour component of works for Greater Visakhapatnam
and Vijayawada Municipal Corporation (up to a belt of 12 Kms. from Municipal
Corporation limits).

(iii) 40% extra over the rates on labour component of works for Amaravati Capital City
area (217 sq.km) as declared by the Govt. vide G.O. Ms. No.141, MA&UD (M2) Dept.,
dt:09.06.2015. (This is introduced as per the Government instructions issued in
Govt.memo.No.668755/Reforms/2017, dt:14.07.2017).

b) Allow 20% extra over basic rates on labour component of works in all District
Headquarters and the remaining Municipal limits (up to a belt of 12 Kms from
Municipal limits).

c) For works at Tirumala Hills in Chittoor District, 40% extra over the basic rates of labour
component is allowed.

d) For works at Horsely hills in Chittoor District, 30% extra over the basic rates of labour
component is allowed.

e) For works located inside Tirumala Temple, 20% extra over the basic rate of labour
component specified for Tirumala Hills is allowed.

f) For Works located inside T.T.D Temples of Sri Padmavathi Ammavari Temple,
Tiruchanoor, Sri Govindaraja Swamy Temple at Tirupathi, Sri Kapleswara Swamy Temple,
Kapilatheerthm, Tirupathi and Sri Kalyana Venkateswara Swamy Temple, Srinivasa
Mangapuram, 20% extra over the basic rates of labour component for Tirupathi
Municipal Corporation is allowed.

B) JAIL COMPOUNDS:
20% extra is allowed over labour rates for the work in the Jail compounds. Only
equivalent number of Man Mazdoor shall be provided in the Jail premises and no
women Mazdoor are allowed inside.
C) INDUSTRIAL AREA:
a. 20% over basic rates on labour component works allowed for works situated within 10
Kms belt of Industrial area of, Ibrahimpatnam, Vuyyuru, Jaggaiahpeta in Krishna District,
Macherla, Gurajala, Challapalli in Guntur District, Garividi in Vijayanagaram District, Renigunta in
Chittoor District and Yerraguntla & Mangampet in Kadapa District, Hindupur, Tadipatri,
Anantapur, Guntakal, Rayalcheruvu, Yadiki of Anantapur District and Adoni, Dhone, Cement Nagar,
Nandyal, Kurnool, Yemmiganur & Bethamcherla of Kurnool District, Anakapally of
Vishakhapatnam District.

2
 D) AGENCY / TRIBAL AREAS:
a) 25% extra is allowed for the works located within the interior Agency / Tribal limits,
i.e. for the works located within & upto16 KMs from any all weather route inside
Agency / Tribal.

b) 40% extra is allowed for the works located within the interior Agency / Tribal limits,
i.e. for the works located beyond 16 KMs from any all weather route inside Agency / Tribal.

NOTE: 1. No extra percentage is permissible in respect of Forest produce such as Bamboo,

Rellu grass and for all materials obtained from outside the Agency / Tribal.

2. The extra percentage under Agency / Tribal areas allowance may be allowed on
the labour component and on the labour charges in the rates for conveyance of
materials.

3. The extra percentage on cost of materials in Agency / Tribal areas can be allowed
on the labour component only, if they are manufactured in the Agency / Tribal
areas itself except Forest produce.

E) GHAT ROADS:

For Ghat Roads steeper than 1 in 20, the length of the road may be taken as 1.5 times the
existing length of the road for the purpose of leads only for conveyance of materials based
on the certificate for the Ghat Road given by the Superintending Engineer concerned.

Foot Note: Under compelling circumstances, the concerned Chief Engineer can adopt the
equivalent length of road as 2 ½ times of actual length.

Note below area allowances:

If more than one area allowance ( such as those ) for (1) Municipalities, (2) Agency /
Tribal areas & (3) Industrial areas are applicable for a particular situation, only the
maximum out of the allowable percentages is to be allowed.

2.0 EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN RESTRICTED PLACES: -

I) EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN RESTRICTEDPLACES: -

A. TRIAL TRENCHES:
1) Trial trenches of not more than 2 metres in width … 25% extra.

B. TRIAL PITS:
1) Up to 2 Metres depth … 25% extra
2) 2 Metres to 4 Metres depth … 50% extra
3) 4 Metres to 6 Metres depth … 75% extra
4) 6 Metres to 8 Metres depth … 100% extra
5) 8 Metres to 9 Metres depth … 150% extra
3
 6) More than 9 Metres depth … 200% extra

II) EXCAVATION IN RESTRICTED PLACES:-

I) Foundation of Buildings …. 75% extra

II) For pipe lines where the depth is less than

1.5 times the width …. 75% extra

III) For pipe lines where the depth is 1.5 times

or more than the width …. 120% extra

IV) Silt removal in restricted areas such U. T’s,

Culverts and Syphon …. 120% extra

V) Excavation of field channels …. 75% extra

VI) For narrow trenches not more than 2 meters

in width and depth not less than twice the width
and for excavation of road boundary drains,
model sections of canals …. 75% extra

VII) High berm cutting of not more than 150mm

average thickness and sectioning of roads …. 75% extra

Note: 1) The extra percentage is allowed over Common item for all earth works (COM- MWRK-
Manual Works) for corresponding soil and Standard data items. It includes the charges
for all lifts and initial lead but does not include dewatering charges if any in respect of all
the items under (A) and (B) above.

2) The above extra percentages in respect of excavation in hard rock for restricted places are
to be allowed for (2/3)rd of the cost and shall not to be allowed in respect of items
involving blasting component which may be taken as (1/3)rd of the cost.

3.0. Seigniorage Charges (including DMF, MERIT and Consideration Fee):

The rates of materials indicated in the SoR are exclusive of Seigniorage Charges, DMF Charges,
MERIT Charges and Consideration amount. Appropriate Seigniorage Chargers, DMF Charges, MERIT
Charges and Consideration amount for relevant materials are to be added to the unit rate of work
item in the estimates as fixed by the Government in G.O. Ms. No. 11, Industries & Commerce Dept.,
dt.11-02-2020 and G.O. Ms. No. 37 (Industries and Commerce M.III Dept.) dt.15-03-2024 read with
G.O. Ms. No. 36 (Industries and Commerce MII Dept., dt.14-03-2016 (DMF), G.O. Ms. No. 18
(Industries and Commerce M-II Dept., dt.13-01-2016 (MERIT) & G.O. Ms. No. 42 (Industries and
Commerce M-III Department.,) dt.07-06-2021 (Consideration amount). In case of revision, the revised
rates as fixed by the Mines & Geology Department from time to time are to be adopted.

4
 Part I - Labour Rates - Common SoR 2024-25

LABOUR RATES

5
 Part I - Labour Rates-Common SoR 2024-25

LABOUR RATES
S. Rate
Sl No. CFMS CODE CATEGORY OF WORKER for
2024-25
1 2 3 4
I. SKILLED CATEGORY:
1 LAB-00001 Bar bender 850

2 LAB-00002 Black smith / Tin smith / Rivetor 670

3 LAB-00003 Blaster 780

4 LAB-00004 Carpenter Cl- I 795

5 LAB-00005 Electrician ( Licensed ) 790

6 LAB-00006 Fitter Cl- I 750

7 LAB-00007 Floor Polisher / Tile Layer 670

8 LAB-00008 Foreman 780

9 LAB-00009 Gauge reader 665

Maistry / Work Inspector with Non-technical 775

LAB-00010
10 Qualification SSLC/SSC/HSC
11 LAB-00011 Mason Cl- I / Brick layer Cl- I 710

12 LAB-00012 Mechanic Cl- I 720

13 LAB-00013 Operator Air compressor / DG set 695

14 LAB-00014 Operator Batching plant 790

15 LAB-00015 Operator Bus/Ambulance/ Lorry/ Tanker 765

16 LAB-00016 Operator Concrete / Asphalt mixer 695

17 LAB-00017 Operator Concrete / Asphalt paver 695

18 LAB-00018 Operator Concrete pump / Placer/ ice plant 695

19 LAB-00019 Operator Core drilling machine 780

20 LAB-00020 Operator Crane/ Tower crane/ Cable way 780

21 LAB-00021 Operator Drilling jumbo / Loco / Winch 695

22 LAB-00022 Operator Grouting/ Guniting/ Shotcreting 695

23 LAB-00023 Operator Jackhammer/Pneumatic tamper 695

24 LAB-00024 Operator Pump / Ventilation fan 695

25 LAB-00025 Operator Lathe/Drilling/Shearing machine 780

26 LAB-00026 Operator Bending / Planing machine 695

27 LAB-00027 Operator Road roller 720

6
 Part I - Labour Rates-Common SoR 2024-25

S. Rate
Sl No. CFMS CODE CATEGORY OF WORKER for
2024-25
1 2 3 4
28 LAB-00028 Operator Shovel / Scraper / Dozer 780

29 LAB-00029 Operator Spillway / Sluice gate 695

30 LAB-00030 Operator Crusher / Conveyor / Mucker 695

31 LAB-00031 Operator Tipper / Dumper / Transit mixer 780

32 LAB-00032 Operator Concrete vibrator 695

33 LAB-00033 Operator Vibratory plain / pad foot roller 695

34 LAB-00034 Operator Wagon drill / Drifter 780

35 LAB-00035 Painter Cl- I 795

36 LAB-00036 Plumber / Pipe fitter 795

37 LAB-00037 Sarang / Khalasi 695

38 LAB-00038 Spun pipe moulder 695

39 LAB-00039 Stone chiseller CI- I / Stone cutter Cl- l 700

40 LAB-00040 Struct. steel Fabricator / Marker / Erector 850

41 LAB-00041 Welder / Gas Cutter 695

42 LAB-00042 Welder (X-ray quality) 780

II. SEMI SKILLED CATEGORY:

1 LAB-00057 Asphalt Sprayer / Boiler attendant 640

2 LAB-00058 Bhisti 640

3 LAB-00059 Boatman with boat 640

4 LAB-00060 Carpenter Cl- II / Erector shuttering 640

5 LAB-00061 Cartman with double bullock cart 710

6 LAB-00062 Cartman with single bullock cart 670

7 LAB-00063 Chavali / Navagani 640

8 LAB-00064 Crowbarman / Jumper man 640

9 LAB-00065 Fitter Cl- II 640

10 LAB-00066 Gang man / Head / Survey mazdoor 640

11 LAB-00067 Gardener / Trained mali 640

12 LAB-00068 Air compressor / DG set 640

13 LAB-00069 Helper Batching plant 640

14 LAB-00070 Helper Blasting 640

7
 Part I - Labour Rates-Common SoR 2024-25

S. Rate
Sl for
CFMS CODE CATEGORY OF WORKER
No. 2024-25
1 2 3 4
15 LAB-00071 Helper Bus/ Ambulance/ Lorry/ Tanker 640

16 LAB-00072 Helper Bending/Shearing/Planing machine 640

17 LAB-00073 Helper Carpenter 640

18 LAB-00074 Helper Concrete / Asphalt mixer 640

19 LAB-00075 Helper Concrete / Asphalt paver 640

20 LAB-00076 Helper Core drilling machine 640

21 LAB-00077 Helper Crane/ Tower crane/ Cable way 640

22 LAB-00078 Helper Drilling jumbo / Loco / Winch 640

23 LAB-00079 Helper Fitter / Fabrication/Electrician 640

24 LAB-00080 Helper Grouting/ Guniting/ Shotcreting 640

25 LAB-00081 Helper Jack hammer / Pneumatic tamper 640

26 LAB-00082 Helper Laboratory / Instrumentation 640

27 LAB-00083 Helper Road roller 640

28 LAB-00084 Helper Shovel / Scraper / Dozer 640

29 LAB-00085 Helper Crusher / Conveyor / Mucker 640

30 LAB-00086 Helper Tipper / Dumper/ Transit mixer 640

31 LAB-00087 Helper Vibrator 640

32 LAB-00088 Helper Vibratory plain/ pad foot roller 640

33 LAB-00089 Helper Wagon drill/ Drifter 640

34 LAB-00090 Lineman Electric / Telephone 640

35 LAB-00091 Mason Cl- ll / Brick layer Cl-II 640

36 LAB-00092 Mechanic Cl- II 640

37 LAB-00093 Painter Cl- II 640

38 LAB-00094 Patkari / Neeraganti / Sowdy 640

39 LAB-00095 Stone Chiseller Cl- II 640

40 LAB-00096 Stone breaker / Hammer man 640

41 LAB-00097 Valve man / Canal sluice operator 640

III. UN-SKILLED CATEGORY:

1 LAB-00118 Cement / Asphalt handling mazdoor 595

2 LAB-00119 Civic worker 595

3 LAB-00120 Man mazdoor 595

8
 Part I - Labour Rates-Common SoR 2024-25

S. Rate
Sl No. CFMS CODE CATEGORY OF WORKER for
2024-25
1 2 3 4
4 LAB-00121 Woman mazdoor 595

5 LAB-00122 Watchman 595

IV. OTHER CATEGORY:

1 LAB-00124 Care-taker / conductor / Lift Attender 640

2 LAB-00125 Cook / Mess man 640

3 LAB-00126 Dhobi 640

4 LAB-00127 Diploma Engineer / Surveyor 1100

5 LAB-00128 Diver with headgear 815

6 LAB-00129 Graduate / Laboratory Assistant 815

7 LAB-00130 Graduate Engineer/ Geologist 1,420

8 LAB-00131 Horticulture Assistant / Photographer 660

9 LAB-00132 ITI certificate holder / Tracer / Printer 795

10 LAB-00133 Literate mazdoor 610

11 LAB-00134 Stenographer / Computer Operator 870

12 LAB-00135 Telephone / Wireless Operator 780

13 LAB-00136 Typist / Job Typist 780
CAD operator with Diploma in Engineering/General 1,100
14 LAB-00137
degree with CAD certificate
15 LAB-00138 Jeep Driver 775

16 LAB-00139 Data Processing Operator 1,065

Note: -
1) The wage should not be less than the minimum wages of schedule of employment, subject to
out turn.
2) 25% extra over the corresponding labour rates in respect of the work to be done during night
time subject to issue of certificate accordingly by the concerned estimate sanctioning authority
for providing in the data and by concerned Executive Engineer in charge of the work for payment.
The night time allowance is applicable only to the works done under Greater Visakhapatnam
Municipal Corporation and Vijayawada Municipal Corporation limits only.

9
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

BASIC INPUT DATA

FOR
WATER RESOURCES
WORK ITEMS

10
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

STATEMENT OF RATES FOR MATERIALS

FOR THE YEAR: 2024-25
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:

1. Average of the prevailing market rates, ignoring freak rates, is the criteria for fixing market
rates for materials.
2. The rates for materials are exclusive of GST, duties and other local levies.
3. The rates for materials are exclusive of Seigniorage charges wherever applicable.
4. The rates for materials, except those for which lead charges are admissible as per the
Statement of lead charges is for all leads.
5. The rates provided for useful rubble / stone chips from excavation shall be at dump yard.
6. Unless otherwise specified the rate of materials are inclusive of loading charges.

S. Rate
Sl No. CFMS CODE DESCRIPTION OF MATERIAL UNIT for
2024-25
1 2 3 4 5
1 MAT-00001 Acetylene gas cum 390

2 MAT-00002 Asphalt 80/100 Grade Kg 49

3 MAT-00003 Binding wire Kg 64

4 MAT-00004 Burnt stone slab 10 cm thick sqm 368

5 MAT-00005 Cement 43 Gr/53 Gr tonne 4220

Note: Rate as fixed by the Government
6 MAT-00006 Chequered plate Kg 68

7 MAT-00007 Coarse aggregate 10-4.75 mm cum 1,098

8 MAT-00008 Coarse aggregate 20-10 mm cum 1,508

9 MAT-00009 Coarse aggregate 40-20 mm cum 1,441

10 MAT-00010 Coarse aggregate 80-40 mm cum 786

The aggregate rates mentioned above (from

Sl.No.7 to Sl.No.10) are exclusive of
Seigniorage charges but including blasting
charges of Rs.70/cum and 25% machine
crushing charges. However, if the metal is
obtained from hand broken, the blasting and
crushing charges shall be deducted. The
aggregate shall be HB Stone of Granite,
Dolamite, Dolerite and Trap. (Quartzite and
Basalt with aggregate impact of less than 20).
11 MAT-00011 Coir brush Each 46

11
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

S. Rate
Sl No. CFMS CODE DESCRIPTION OF MATERIAL UNIT for
2024-25

12 MAT-00012 Copper sheet 16 SWG Kg 772

MAT-00013 Coursed rubble stone 30 x 30 x 45 cm 31

13 Each
14 MAT-00014 Coursed rubble stone 30 x 30 x 60 cm Each 36

15 MAT-00015 Curing Compound Ltr 144

16 MAT-00016 D – cord Rm 9

17 MAT-00017 Delay - noiseless trunk Each 23

18 MAT-00018 Detonating fuse coil Rm 11

19 MAT-00019 Detonating shock tube / Cord relays Rm 43

20 MAT-00020 Detonator delay type Each 24

21 MAT-00021 Detonator electric Each 12

22 MAT-00022 Detonator ordinary Each 9

23 MAT-00023 Empty cement bag Each 8

24 MAT-00024 Explosive ANFO Kg 47

25 MAT-00025 Explosive ANFO high strength booster Kg 73

26 MAT-00026 Explosive small dia ( Kelvex-220 or equivalent) Kg 73

(a)Fine aggregate / sand (un- screened) for
MAT-00027 Cum 605
27 Concrete & Filtering items)

MAT-00028 (b)Fine aggregate / Sand (unscreened) for filling Cum 460

Fine aggregate / Sand (Screened) for
Mortar, Plastering items and Sand blasting
28 MAT-00029 Cum 728
items (Rs.123 is added towards
screening Charges)
Fine aggregate rates are adopted vide Govt.
Memo No. MGODMGE/342/M-III/A2/2020,
Industries and Commerce (M-III) Dept., dt:
26.11.2020.

29 MAT-00030 Geo-textile ( filter fabric ) 160 gsm Sqm 105

30 MAT-00031 Geo-textile ( filter fabric ) 200 gsm Sqm 120

31 MAT-00032 Geo-textile ( filter fabric ) 250 gsm Sqm 135

12
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

S. Rate
Sl No. CFMS CODE DESCRIPTION OF MATERIAL UNIT for
2024-25
1 2 3 4 5

32 MAT-00033 G I Pipe 100 mm dia B Class Rm 757

33 MAT-00034 G I Pipe 15 mm dia A class Rm 94

34 MAT-00035 G I pipe 25 mm dia A class Rm 159

35 MAT-00036 G I pipe 40 mm dia B class Rm 236

36 MAT-00037 G I pipe 50 mm dia A class Rm 277

37 MAT-00038 G I Pipe 80 mm dia B Class Rm 503

38 MAT-00039 G.I Bolts / Nuts and Washers Kg 109

39 MAT-00040 G.I sheet ( plain ) tonne 62,116

40 MAT-00041 Hariyala turfing sods Sqm 347

41 MAT-00042 Hectometer stone one line dressed Each 344

42 MAT-00043 Hemp yarn Kg 73

43 MAT-00044 Honne wood planks Cum 49,957

44 MAT-00045 Hume pipe with collar 150 mm dia Rm 316

45 MAT-00046 Hume pipe with collar 300 mm dia Rm 652

46 MAT-00047 J- Bolts 30 cm long Each 46

47 MAT-00048 Jungle wood planks Cum 22,224

48 MAT-00049 Khandki stone 15 to 20 cm height Each 16

49 MAT-00050 Khandki stone 20 to 25 cm height Each 22

50 MAT-00051 Khandki stone 25 to 30 cm height Each 23

51 MAT-00052 Kilometer stone one line dressed Each 607

52 MAT-00053 LDPE sheet ( Geo membrane ) 500 micron thick Sqm 107

53 MAT-00054 LDPE sheet ( Geo membrane ) 750 micron thick Sqm 152

54 MAT-00055 LDPE sheet ( Geo membrane ) 1000 micron thick Sqm 211

55 MAT-00056 M S Bolts / Nuts / Washers Kg 96

56 MAT-00057 Murrum Cum 250

57 MAT-00058 Oxalic acid Ltr 74

58 MAT-00059 Oxygen gas Cum 48

44
59 MAT-00060 PVC sealing strip Rm

13
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

S. Rate
Sl No. CFMS CODE DESCRIPTION OF MATERIAL UNIT for
2024-25

1 2 3 4 5
60 MAT-00061 PVC water stopper 310 mm wide Rm 457

61 MAT-00062 PVC pipe of 100 mm dia Rm 163

Reinforcement steel (HYSD/TMT )(FE-415)
62 MAT-00063 Note: As per Monthly rate fixed by Sub- 59,000
tonne
Committee
Reinforcement steel (HYSD/TMT )(FE-500/FE-
500D/FE-550)
tonne 60,000
Note: As per Monthly rate fixed by Sub-
Committee
63 MAT-00064 Resin bond Cement capsule Each 57

MAT-00065 Rough stone 20 x 20 x 75 cm 31

64 Each

MAT-00066 Shahabad stone slab 299

65 Sqm

MAT-00067 Stone chips (at dump yard/Spoil) Cum 236

66
67 MAT-00068 Stone chips ( at quarry ) Cum 466
Structural steel angle / channel / beam / bars
68 MAT-00069 Note: As per Monthly rate fixed by Sub- Tonne 60,000
Committee, May 2024
a)Structural steel flats
MAT-00070 Note: As per Monthly rate fixed by Sub- Tonne 61,000
Committee, May 2024
69
b)Structural steel plate
Note: As per Monthly rate fixed by Sub- Tonne 66,000
Committee, May 2024
Super Plasticizer
70 MAT-00071 Kg 63
(Conplast RP-264 or equivalent )
71 MAT-00072 Synthetic Enamel paint 1st quality Ltr 265

72 MAT-00073 Synthetic adhesive ( Resin + Hardener ) Kg 378

73 MAT-00074 Tar felt joint filler board 12 mm thick Sqm 434

74 MAT-00075 Tar felt joint filler board 20 mm thick Sqm 670

75 MAT-00076 Through stones 20 x 20 x 30 to 45 cm Each 29

76 MAT-00077 Through stones 25 x 25 x 45 to 60 cm long Each 50

77 MAT-00078 Through stones 30 x 30 x 65 to 75 cm long Each 72

14
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

S. Rate
Sl No. CFMS CODE DESCRIPTION OF MATERIAL UNIT for
2024-25
1 2 3 4 5
78 MAT-00079 Un-coursed rubble stones ( at dump yard /Spoil) 204
Cum
79 MAT-00080 Un-coursed rubble stones ( at quarry) Cum 395

80 MAT-00081 Water proofing compound Kg 89

81 MAT-00082 Welding electrodes 4 mm dia Each 17

82 MAT-00083 Wire brush Each 49

83 MAT-00084 Wire mesh 20 gauge sqm 228

84 MAT-00085 Zinc chromate red oxide primer paint Ltr 192

85 MAT-00086 inorganic zinc silicate Ltr 643

86 MAT-00087 solvent less coal tar epoxy paint Ltr 310

87 MAT-00088 Zinc phosphate primer Ltr 237

MAT-00089
88 Allkyd based iron oxide paint Ltr 170

MAT-00090
a) Cost of HDPE (90mm dia) Rm 245

b) Light black MS casing pipe 100 mm dia

89 MAT-00091 593
(4mm thick) Rm

90 MAT-00092 Welded steel wire fabric 100X100X5 mm size Kg 217

91 MAT-00093 Protective Mastic Ltr 543

92 MAT-00094 Solventless coal tar epoxy (brown) Ltr 324

15
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

ADDITIONAL MATERIALS FOR GATES & HOISTS

FOR THE YEAR: 2024-25
GUIDE LINES:
a) For cast steel / Alloy steel / Forged steel / Bronze, aluminum alloy components the rates shall be
inclusive of cost of basic metal for these components, casting / forging charges, machining
charges and applicable excise duty on finished alloy component.
b) For other materials the rates shall be of prevailing market rates.

S. Rate
for
Sl No. CFMS CODE DESCRIPTION OF MATERIAL UNIT
2024-25
1 2 3 4 5

1 MAT-00108 Alloy steel ( IS : 1570-carbon steel ) shafts Kg 264

2 MAT-00109 Alloy steel ( IS : 1570-stainless steel ) pins Kg 483

3 MAT-00110 Bolt / Nut / Washer ( hot dipped galvanized ) Kg 146

4 MAT-00111 Bolt / Nut / Washer ( stainless steel ) Kg 403

Bronze/Aluminum
5 MAT-00112 Kg 1,067
alloy(IS:305)bearings/bushes
6 MAT-00113 Cast iron blocks Kg 103

7 MAT-00114 Cast steel drums / gears Kg 266

8 MAT-00115 Cast steel pinions Kg 257

Cast steel wheels / pulleys / hubs /
9 MAT-00116 Kg 221
rollers / Retainers
Chemical for de-greasing/ de-
10 MAT-00117 Ltr 150
rusting/phosphate Coating
11 MAT-00118 Coal tar epoxy paint Ltr 221

12 MAT-00119 Forged steel hooks / shackles Kg 318

13 MAT-00120 MS pipe 200 / 300 mm dia Kg 186

14 MAT-00121 MS pipe 32 mm dia Rm 199

15 MAT-00122 MS pipe 25 mm dia Rm 163

Rubber bottom seal ( IS : 11855 )

16 MAT-00123 Rm 731
(100mm X 14 mm)
Rubber side seal ( music note type Teflon claded )
17 MAT-00124 Rm 1,575
(IS : 11855 ) (36 Ø X 113mm X 14mm)
Rubber side seal ( music note type uncladed )
18 MAT-00125 Rm 1,201
(IS : 11855 ) (36Ø X 113 mm X 14 mm)

16
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

S. Rate
for
Sl No. CFMS CODE DESCRIPTION OF MATERIAL UNIT
2024-25
1 2 3 4 5
Rubber side seal Z-type ( IS : 11855 )
19 MAT-00126 Rm 1,502
(36Ø X 120mm X 19mm)
Rubber corner seal (Teflon claded ) ( IS : 11855 )
20 MAT-00127 Each 1,645
(36Ø)
Rubber corner seal (un claded )
21 MAT-00128 Each 1,258
( IS : 11855 ) (36Ø)
22 MAT-00129 Stainless steel plates / flats Kg 292
Welding electrode 4 mm dia x 450 mm
23 MAT-00130 Each 22
(radiographic low hydrogen )
Welding electrode 4 mm dia x 450 mm
24 MAT-00131 Each 27
(stainless steel )
25 MAT-00132 Wire rope 6x37 constn ( IS : 2266 ) Kg 203

26 MAT-00133 Zinc Kg 198

27 MAT-00134 Zinc rich ( zinc content : 90 % ) epoxy primer Ltr 675

MATERIALS FOR POWER SUPPLY WORKS

FOR THE YEAR: 2024-25

S. Rate for
Sl
CFMS CODE Description of Material Unit 2024-25
No.

1 MAT-00135 Electric pole with fixtures Each

2 MAT-00136 Flood light 500 W Each

3 MAT-00137 Flood light set Each

For establishing
4 MAT-00138 Flouscent tube light 40 W Each Electrical Sub-
MAT-00139 Flouscent tube light set Each Stations at the
5
Project Sites
6 MAT-00140 HT / LT Circuit breaker with accessories Set wherever
MAT-00141 HT / LT Line conductor 1000 m necessary, the rates
7
approved by
8 MAT-00142 PVC Armoured cable 10
Rm APTRANSCO may
sqmm and below
be followed.
9 MAT-00143 PVC Armoured cable 16 sqmm Rm
10 MAT-00144 PVC Armoured cable 25 sqmm Rm

11 MAT-00145 PVC Armoured cable 70 sqmm Rm

17
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

DETAILS OF CAPITAL COST OF MACHINERY / EQUIPMENT FOR THE

YEAR: 2024-25
GUIDE LINES FOR FIXING CAPITAL COST OF MACHINERY / EQUIPMENT:

1. The Capital cost of machinery / equipment shall be for new machinery / equipment and
shall be exclusive of GST, duties and other levies.
2. The cost of transport vehicles / equipment shall be exclusive of cost of tyres and tubes.
3. The cost of drill rods / drill bits / air hose / water hose / road tax / insurance charges and
other consumable accessories shall not be included in the capital cost.
4. In cases, where the current capital cost of machinery / equipment could not be collected
through enquiries, the capital cost considered for previous year may be updated on the
basis of average percentage increase / decrease in the index for machinery published in the
R.B.I Bulletin.
S. Rate
Sl
CFMS CODE DESCRIPTION OF MACHINERY / EQUIPMENT UNIT for
No:
2024-25
1 2 3 4 5
Agitator car / Transit mixer 2 cum
1 MAT-00600 Each 23,58,400
( excluding tyres )
MAT-00601 tyres and tubes 6 sets 88,300
2 MAT-00602 Air compressor 5 cmm electric Each 7,26,000
3 MAT-00603 Air compressor 7 cmm diesel Each 9,70,200
4 MAT-00604 Air compressor 7 cmm electric Each 9,10,490
5 MAT-00605 Air compressor 8.5 cmm diesel Each 11,42,850
6 MAT-00606 Air compressor 8.5 cmm electric Each 11,82,520
7 MAT-00607 Air compressor 15 cmm electric Each 14,43,900
8 MAT-00608 Angle Dozer 90 hp Each 54,28,200
Batching plant 0.5 cum with accessories
9 MAT-00609 Each 12,56,100
(6 Cum/hr)
Batching plant 2 x 1.00 cum with accessories ( 15
10 MAT-00610 Each 44,43,200
Cum/hr)
Batching plant 2 x 1.50 cum with accessories ( 50
11 MAT-00611 Each 68,04,000
Cum/hr)
12 MAT-00612 Bending machine Each 5,80,400
13 MAT-00613 Clam shell and hoisting ropes Each 33,680
14 MAT-00614 Concrete bucket 1.5 cum Each 63,500
15 MAT-00615 Concrete hand mixer 45/30 ltr Each 16,400
16 MAT-00616 Concrete mixer 300/200 ltr(diesel) Each 1,57,800
17 MAT-00617 Concrete mixer 300/200 ltr ( electric ) Each 1,54,100
18 MAT-00618 Concrete mixer 600/400 ltr(diesel) Each 2,68,500
19 MAT-00619 Concrete mixer 600/400 ltr ( electric ) Each 2,63,000

18
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

S. Rate
Sl
CFMS CODE DESCRIPTION OF MACHINERY / EQUIPMENT UNIT for
No:
2024-25
1 2 3 4 5
20 MAT-00620 Concrete paver 100 Sqm / hr Each 24,65,900
21 MAT-00621 Convey mucker ( excluding tyres ) Each 39,91,000
MAT-00601 tyres and tubes 6 sets 88,300
22 MAT-00622 Core drilling machine Each 11,41,700
23 MAT-00623 Diesel generating set 30 KVA Each 5,32,900
24 MAT-00624 Diesel generating set 50 KVA Each 6,65,700
25 MAT-00625 Diesel Loco 45 hp Each 22,00,200
26 MAT-00626 Dewatering pump 5 hp diesel Each 42,200
27 MAT-00627 Dewatering pump 5 hp electric Each 27,150
28 MAT-00628 Dewatering pump 10 hp diesel Each 66,300
29 MAT-00629 Dewatering pump 10 hp electric Each 60,600
30 MAT-00630 Dewatering pump 20 hp diesel Each 2,09,400
31 MAT-00631 Dewatering pump 20 hp electric Each 1,13,600
32 MAT-00632 Drifter Each 11,04,400
33 MAT-00633 Drilling jumbo ( excluding tyres ) Each 14,49,900
MAT-08524 tyres and tubes 6 sets 88,300
34 MAT-00634 Dumper 4.5 cum ( excluding tyres ) Each 16,32,100
MAT-00601 tyres and tubes 6 sets 88,300
35 MAT-00635 Geophysical Ele.resistivity meter Each 5,36,800
36 MAT-00636 Grouting pump Each 1,02,760
37 MAT-00637 Guniting / sand blasting equipment Each 3,22,840
38 MAT-00638 Ice plant with accessories 30 t / day Each 26,78,500
39 MAT-00639 Jack hammer Each 65,600
40 MAT-00640 Needle vibrator 40 mm petrol Each 22,440
41 MAT-00641 Needle vibrator 40 mm electric Each 21,400
42 MAT-00642 Needle vibrator 60 mm petrol Each 27,460
43 MAT-00643 Needle vibrator 60 mm electric Each 22,260
44 MAT-00644 Planing machine 4 m stroke Each 9,30,150
45 MAT-00645 Plate shearing machine up to 12 mm Each 5,06,810
46 MAT-00646 Pneumatic placer 0.5 cum Each 5,87,700

47 MAT-00647 Pneumatic tamper Each 86,490

19
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

S. Rate
Sl
CFMS CODE DESCRIPTION OF MACHINERY / EQUIPMENT UNIT for
No:
2024-25
1 2 3 4 5
48 MAT-00648 Pug cutting machine Each 17,620
49 MAT-00649 Pusher leg Each 63,650
50 MAT-00650 Road roller diesel 10 t Each 8,64,000
51 MAT-00651 Shovel 0.50 cum 75 hp Each 40,58,160
52 MAT-00652 Shovel 0.85 cum 110 hp Each 67,79,500
53 MAT-00653 Stationery derrick crane 5 t Each 6,97,150
54 MAT-00654 Tipper 5 cum ( excluding tyres ) Each 18,46,700
MAT-00601 tyres and tubes 6 sets 88,300
55 MAT-00655 Tipping tub 1.5 cum Each 2,79,950
56 MAT-00656 Tower crane 5 tonne Each 79,43,220
57 MAT-00657 Transformer 250 KVA Each 5,22,900

MAT-00658 Truck 10 t ( excluding tyres ) Each 16,30,150

58
MAT-00601 tyres and tubes 6 sets 88,300
Truck mounted derrick crane 5 t
59 MAT-00659 Each 21,73,200
( excluding tyres )
MAT-00601 tyres and tubes 6 sets 88,300
60 MAT-00660 Upright drilling machine Each 61,500
61 MAT-00661 Ventilation fan 20 hp Each 3,03,050
62 MAT-00662 Vibratory pad foot roller 8 t Each 29,98,600
63 MAT-00663 Wagon drill Each 7,17,050
64 MAT-00664 Water tanker 8000 ltr (excluding tyres) Each 16,83,450
MAT-00601 tyres and tubes 6 sets 88,300
65 MAT-00665 Welding set Each 54,250
66 MAT-00666 Winch 35 hp electric Each 4,19,450
67 MAT-00667 Hydraulic Truck Crane 30T Each 1,59,94,350
MAT-08525 tyres and tubes 6 sets 1,92,000
68 MAT-00668 Hydraulic Truck Crane 16T Each 1,10,33,700
MAT-08526 tyres and tubes 6 sets 1,85,200
69 MAT-00669 Heavy Duty Airless Spray Painting Equipment Each 5,03,450
70 MAT-00670 Concrete Placer Pump(25 Cum/hr)(Electric) Each 32,83,400

20
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

ACCESSORIES TO MACHINERY / EQUIPMENT FOR THE YEAR: 2024-25

S Rate
Sl for
CFMS CODE DESCRIPTION OF MATERIAL UNIT
No. 2024-25
1 2 3 4 5

1 MAT-00671 Casing shoe bit Each 12,800

2 MAT-00672 Diamond core bit BX size Each 13,050

3 MAT-00673 Diamond core bit NX size Each 15,670

4 MAT-00674 Double tube core barrel Each 16,703

5 MAT-00675 Extension drill rod with coupling sleeve Rm 2,371

6 MAT-00676 Jack hammer drill rod 1.5 m Each 4,674

7 MAT-00677 Jack hammer drill rod 2.5 m Each 6,996

8 MAT-00678 Nozzle for Guniting / sand blasting gun Each 778

9 MAT-00679 Paving Cylinder Each 34,245

10 MAT-00680 Rails 30R ( 30 kg / m ) tonne 63,418

11 MAT-00681 Reamer shell Each 6,277

12 MAT-00682 T.C. Cross bit 50 mm dia Each 6,157

13 MAT-00683 T.C. Cross bit 75 mm dia Each 12,313

14 MAT-00684 T.C. Cross bit 100 mm dia Each 14,494

15 MAT-00685 Tyres and Tubes for truck Set 17,508

16 MAT-00686 Wire rope 16 mm dia Rm 318

17 MAT-00687 Excavation of drain with Excavator Cum 47

21
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

AGGREGATE CRUSHING & PROCESSING PLANT

S Rate
CFMS
Sl No. DESCRIPTION OF MATERIAL UNIT for
CODE
2024-25
1 2 3 4 5
Jaw crusher 900 x 500 mm ( 120 tph ) with 50 hp
1 Each
Motor
Jaw crusher 500 x 300 mm ( 60 tph ) with 30 hp
2 Each
Motor
Jaw crusher 400 x 225 mm ( 10 tph ) with 25 hp These items are no
3 Each
Motor where being used
4 Jaw plates 900 x 500 mm ( serreted ) Set in the
Standard Data.
5 Jaw plates 500 x 300 mm ( serreted ) Set Hence
this may be
6 Jaw plates 400 x 225 mm ( serreted ) Set deleted from SoR
7 Nylon Conveyor belt 3 ply 600 mm width Rm

8 Nylon Conveyor belt 3 ply 1000 mm width Rm

OTHER COSTS ON MATERIAL / MACHINERY / EQUIPMENT

FOR THE YEAR: 2024-25
1. The rate provided for 'SUNDRIES' (Lump sum provision for unquantified inputs in the data
rates) shall be updated on the basis of general percentage increase / decrease in the market
rates or on the basis of R.B.I ' All Commodity' index.
2. The rate for structural steel fabrication shall include cost of all materials (except structural steel),
machinery, labour and one coat of primer painting.
3. Demand charges and electric power charges shall be as per prevailing APEPDCL tariff.
4. Rate of interest on capital cost shall be as approved by Govt or other competent authority.
S Rate
Sl DESCRIPTION OF MATERIAL
CFMS CODE UNIT for
No.
2024-25
1 2 3 4 5

1 MAT-00688 Air hose 25 mm dia Rm 195

2 MAT-00689 Air hose 50 mm dia Rm 295

Demand charges (HT-I : General-11 KV
KVA /
category) on power supply(as per APEPDCL 475
3 MAT-00690 month
tariff)
4 MAT-00691 Diesel Ltr 97.42
Electric power (HT-VIII Category) including tax (
1.5 times of the Tariff of HT-I(A):General-11 Kwhr 9.45
5 MAT-00692
KVA Category) (as per APEPDCL tariff).

6 MAT-00693 Excise duty on Gates / Hoist supplies % 0

22
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

S Rate
Sl DESCRIPTION OF MATERIAL
CFMS CODE UNIT for
No.
2024-25
1 2 3 4 5

7 MAT-00694 Insurance charges on machinery % / annum 1

8 MAT-00695 Interest on capital cost % / annum 9

9 MAT-00696 Lubricants Ltr 271

10 MAT-00697 Petrol Ltr 109.58

11 MAT-00698 Rivets Kg 120

12 MAT-00699 Road tax on transport vehicles Rs./annum As per RTA

13 MAT-00700 Shalimatic sealing compound Kg 107

14 MAT-00701 Shutter oil Ltr 63

15 MAT-00702 Structural steel fabrication Kg 35

16 Sundries ( Lump sum for un quantified inputs ) LS 41

MAT-00703

17 MAT-00704 Water hose ( pressure ) 20 mm dia Rm 198

18 Steel wedges LS 20
MAT-00705

19 MAT-00706 Elbows / Nipple / Plugs etc., LS 20

20 MAT-00707 Soldering materials LS 20

21 MAT-00708 Steam circulation arrangement LS 20

22 MAT-00709 Fuel charges ( gas for heating ) LS 26

23 MAT-00710 Vulcanizing materials LS 26

24 MAT-08527 Other accessories / controls / junctions LS 26

25 Miscellaneous fittings / switches etc LS Deleted

26 Anchors / supports for cables / lights LS Deleted

Civil works for foundations / pedestals / duct Deleted

27 LS
etc

MAT-00711 Gas cutting set ( 2 No’s 15 m hose and nozzle 15,355

28 Each
unit )

29 MAT-00712 Grease Kg 297

MAT-00713 Welding holder set ( cable / holder / gloves /

30 Each 8,927
mask etc )

31 MAT-00385 Use rate of ropes LS 198

23
 Part I-Basic Input data for WR Work items – Common SoR 2024-25

MATERIALS FOR GATES AND HOISTS FOR THE YEAR: 2024-25

S Rate for
Sl No. CFMS CODE DESCRIPTION OF MATERIAL UNIT
2024-25

1 2 3 4 5

1 MAT-00095 Worm reducers Each 2,22,598

2 MAT-00096 Electric motor 20 hp(Double Shaft) Each 1,24,422

3 MAT-00097 Electric motor 17.5 hp(Double Shaft) Each 82,237

4 MAT-00098 Electric motor 12.5 hp(Double Shaft) Each 69,463

5 MAT-00099 Electric motor 5 hp(Double Shaft) Each 31,517

6 MAT-00100 Electric motor 3 hp (Double Shaft) Each 21,908

7 MAT-00101 Electric motor 2 hp (Double Shaft) Each 12,590

8 MAT-00102 Floating shaft 300 mm dia Kg 193

9 MAT-00103 Manual operating system Each 32,482

10 MAT-00104 Gate position indicator Each 2,03,550

11 MAT-00105 Ele-magnetic brake Each 32,386

Electric cable / switch / control panel

12 MAT-00106 LS 54,683
etc
13 MAT-00107 Wire rope sockets Each 5,446

24
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

Materials other than covered under WR work items

for the year 2024-25
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:
1. Average of the prevailing market rates, ignoring freak rates, is the criteria for fixing market
rates for materials.
2. The rates for materials is exclusive of GST, duties and other local levies.
3. The rates for materials are exclusive of Seigniorage charges wherever applicable.
4. The rates for materials, except those for which lead charges are admissible as per the
Statement of lead charges is for all leads.
CFMS S. Rate for
Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5
MAT-
M-002 Quarried stone 150 - 200 mm size for Hand Broken Cum 190
00175
MAT-
M-003 Boulder with minimum size of 300 mm for Pitching Cum 206
00176
Rate as per item no.27 (b)
M-004 Coarse sand for filling Cum
of Material rates of WRD.
Rate as per item no.27 (a)
M-005 Coarse sand for mortar Cum
of Material rates of WRD.
Rate as per item no.28 of
M-006 Fine Sand Cum
Material rates of WRD.
Rate as per item no.56 of
M-007 Murrum
Cum Material rates of WRD.
MAT-
M-008 Gravel/Quarry spall Cum 165
00177
M-009 Granular Material or hard Murrum for GSB works Cum Deleted
MAT-
M-010 Granular Material or hard Murrum for GSB works Cum 125
00178
MAT-
M-011 Fly ash conforming to IS: 3812 ( Part II & I) Cum 86
00179
For item No.M-012 to M-055 the note shall be as
follows
1) The rates mentioned are exclusive of Seigniorage
charges but inclusive of blasting charges of
Rs.70/cum and 25% machine crushing charges.
However, if the metal is obtained by hand broken,
machine crushing charges shall be deducted.
2) If the material is obtained by hand broken from
surface boulders/canal spoil, the blasting and
crushing charges shall be deducted.
3) The material shall be HB Stone of Granite, Dolamite,
Dolerite and Trap.(Quartzite and Basalt with
aggregate impact of less than 20).

25
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5
MAT- Filter media/Filter Material as per Table 300-3 (MoRT&H
M-012 Cum 401
00180 Specification)
MAT- Close graded Granular sub-base Material 53 mm to 9.5
M-013 Cum 783
00181 mm
MAT- Close graded Granular sub-base Material 37.5 mm to 9.5
M-014 Cum 808
00182 mm
MAT- Close graded Granular sub-base Material 26.5 mm to 9.5
M-015 Cum 858
00183 mm
MAT- Close graded Granular sub-base Material 9.5 mm to 4.75
M-016 Cum 712
00184 mm
MAT- Close graded Granular sub-base Material 9.5 mm to 2.36
M-017 Cum 688
00185 mm
MAT- Close graded Granular sub-base Material 4.75mm to 2.36
M-018 Cum 609
00186 mm
MAT- Close graded Granular sub-base Material 4.75mm to 75
M-019 Cum 587
00187 micron mm.
MAT-
M-020 Close graded Granular sub-base Material 2.36 mm Cum 581
00188
MAT- Stone crusher dust finer than 3mm with not more than
M-021 Cum 417
00189 10% passing 0.075 sieve.
MAT-
M-022 Coarse graded Granular sub-base Material 2.36 mm & below Cum 588
00191
MAT- Coarse graded Granular sub-base Material 4.75mm to 75
M-023 Cum 562
00192 micron mm
MAT- Coarse graded Granular sub-base Material 4.75 mm to 2.36
M-024 Cum 562
00193 mm
MAT- Coarse graded Granular sub-base Material 9.5 mm to 4.75
M-025 Cum 692
00194 mm
MAT- Coarse graded Granular sub-base Material 26.5 mm to 4.75
M-026 Cum 754
00195 mm
MAT- Coarse graded Granular sub-base Material 26.5 mm to 9.5
M-027 Cum 757
00196 mm
MAT- Coarse graded Granular sub-base Material 37.5 mm to 9.5
M-028 Cum 841
00197 mm
MAT- Coarse graded Granular sub-base Material 53 mm to 26
M-029 Cum 1,034
00198 .5mm
MAT-
M-030 Aggregates below 5.6 mm Cum 674
00199
MAT-
M-031 Aggregates 22.4 mm to 2.36 mm Cum 1,106
00200
MAT-
M-032 Aggregates 22.4 mm to 5.6 mm Cum 1,255
00201
MAT-
M-033 Aggregates 45 mm to 2.8 mm Cum 806
00202
26
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
2 3 4 5
Rate as per item no.9 of
M-034 Aggregates 45 mm to 22.4 mm Cum
Material rates of WRD.
MAT-
M-035 Aggregates 53 mm to 2.8 mm Cum 1,108
00203
MAT-
M-036 Aggregates 53 mm to 22.4 mm Cum 1,050
00204
MAT-
M-037 Aggregates 63 mm to 2.8 mm Cum 867
00205
MAT-
M-038 Aggregates 63 mm to 45 mm Cum 805
00206
Rate as per item no.10 of
M-039 Aggregates 90 mm to 45 mm
Cum Material rates of WRD.
Rate as per item no.07 of
M-040 Aggregates 10 mm to 5 mm
Cum Material rates of WRD.
MAT-
M-041 Aggregates 11.2 mm to 0.09 mm Cum 869
00207
MAT-
M-042 Aggregates 13.2 mm to 0.09 mm Cum 985
00208
MAT-
M-043 Aggregates 13.2 mm to 5.6 mm Cum 1,128
00209
MAT-
M-044 Aggregates 13.2 mm to 10 mm Cum 1,255
00210
Rate as per item no.08 of
M-045 Aggregates 20 mm to 10 mm Cum
Material rates of WRD.
MAT-
M-046 Aggregates 25 mm to 10 mm Cum 1,371
00211
MAT-
M-047 Aggregates 19 mm to 6 mm Cum 1,261
00212
MAT-
M-048 Aggregates 37.5 mm to 19 mm Cum 1,359
00213
MAT-
M-049 Aggregates 37.5 mm to 25 mm Cum 1,412
00214
MAT-
M-050 Aggregates 6 mm nominal size Cum 925
00215
MAT-
M-051 Aggregates 10 mm nominal size Cum 1,145
00216
MAT-
M-052 Aggregates 13.2/12.5 mm nominal size Cum 1,350
00217
MAT-
M-053 Aggregates 20 mm nominal size Cum 1,676
00218
MAT-
M-054 Aggregates 25 mm nominal size Cum 1,608
00219
MAT-
M-055 Aggregates 40 mm nominal size Cum 1,033
00220

27
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5

M-056 AC pipe 100 mm dia Metre Rate as per PH item

MAT-
M-057 Acrylic polymer bonding coat Litre 603
00221
MAT-
M-058 Aluminum Paint Litre 326
00222
MAT-
M-059 Aluminum alloy plate 2mm Thick Sqm 418
00223
MAT-
M-060 Aluminum alloy/Galvanized steel Tonne 67,372
00224
Aluminum sheeting fixed with encapsulated lens
MAT- type reflective sheeting including 2% towards
M-061 Sqm 971
00225 lettering, cost of angle iron, cost of drilling holes,
nuts, bolts etc. and signs as applicable
MAT- Aluminum studs 100 x 100 mm fitted with lens
M-062 No’s As per local market Rate
00226 reflectors
MAT-
M-063 Barbed wire Kg 76
00227
MAT-
M-064 Bearing (Cost of parts) No’s 617
00228
MAT- Bearing (Cast steel rocker bearing assembly of 250
M-065 No’s 859
00229 tonne)
Bearing (Elastomeric bearing assembly consisting
MAT- of 7 internal layers of elastomer bonded to 6 nos.
M-066 00230 internal reinforcing steel laminates by the process Cm3
of vulcanization,)
MAT-
M-067 Bearing (Forged steel roller bearing of 250 tonne) No’s
00231
Bearing (Pot type bearing assembly consisting of a
As per Market
metal piston supported by a disc, PTFE pads
competitive
MAT- providing sliding surfaces against stainless steel
M-068 No’s rates.
00232 mating together with cast steel
assemblies/fabricated structural steel assemblies
duly painted with all components
MAT- Bearing (PTFE sliding plate bearing assembly of 80
M-069 00233 tonnes ) No’s
MAT- Bearing (Supply of sliding plate bearing of 80
M-070 00234 tonne) No’s
MAT-
M-071 9
00235 Bentonite Kg

28
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5
Rate as per item no.3
M-072 Binding wire Kg of Material rates of
WRD.
MAT-
M-073 Bitumen ( Cationic Emulsion ) Tonne
00236
MAT-
M-074 Bitumen (60-70 grade) Tonne
00237
MAT-
M-075 Bitumen (80-100 grade ) Tonne As per rates fixed by
00238
R&B Dept based on
MAT-
M-076 Bitumen (Cutback ) Tonne refinery rates
00239
MAT-
M-077 Bitumen (emulsion) Tonne
00240
MAT-
M-078 Bitumen (modified graded) Tonne
00241
M-079 Brick Each As per Building SSR
MAT-
M-080 C.I. shoes for the pile Kg 67
00242
Rate as per item no.5
M-081 Cement Tonne of Material rates of
WRD.
Rate as per item no.62
M-082 Cold twisted bars (HYSD/TMT Bars) Tonne of Material rates of
WRD
MAT-
M-083 Collar for joints 300 mm dia No’s 159
00243
MAT-
M-084 Compressible Fibre Board(20mm thick) Sqm 613
00244
MAT-
M-085 Connectors / Staples Each 81
00245
MAT-
M-086 Copper Plate (12m long x 250mmwide) Kg 312
00246
Corrosion resistant Structural steel
MAT-
M-087 Note: As per Monthly rate fixed by Sub- Tonne 61,000
00247
Committee
MAT- Corrugated sheet, 3 mm thick, "Tie" beam section
M-088 Kg 201
00248 railing
MAT-
M-089 Credit for excavated rock found suitable for use Cum 253
00249
Rate as per item no.15
MAT-
M-090 Curing compound Liter of Material rates of
00250
WRD.
Rate as per local
MAT- Delineators from ISI certified firm as per the
M-091 Each competitive
00251 standard drawing given in IRC – 79.
quotations
29
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5
MAT- Earth Cost or compensation for selected earth for
M-092 Cum 144
00252 shoulders taken from Private Land
Elastomeric slab seal expansion joint assembly
MAT- manufactured by using chloroprene, elastomer for As per local competitive
M-093 00253 elastomeric slab unit conforming to clause 915.1 of Metre quotations
IRC: 83 (part II),
Electric Detonators @ 1 detonator for 1/2 gelatin 100 Rate as per item no.21 of
M-094 Material rates of WRD.
stick of 125 gms each no’s
MAT- Epoxy compound with accessories for preparing
M-095 Kg 329
00254 epoxy mortar
MAT-
M-096 109
00255 Epoxy mortar Kg
MAT-
M-097 548
00256 Epoxy primer Kg
MAT-
M-098 587
00257 Epoxy resin-hardener mix for prime coat Kg
MAT-
M-099 28
00258 Flag of red color cloth 600 x 600 mm Each
MAT-
M-100 51
00259 Flowering Plants Each
MAT-
M-101 185
00260 Galvanized MS flat clamp No’s

MAT- Galvanized steel wire crates of mesh size 100 mm x

M-102 179
00261 100 mm woven with 4mm dia. GI wire in rolls of Sqm
required size.
MAT- Galvanized structural steel plate 200 mm wide, 6
M-103 Kg 915
00263 mm thick, 24 m long
MAT-
M-104 71
00264 Gelatin 80% Kg
Rate as per local
MAT-
M-105 competitive
00265 Geo grids Sqm
quotations
Rate as per item No.
M-106 (a)Geo membrane 500 micron thick Sqm 52 of WRD
Rate as per item No.
(b) Geo membrane 750 micron thick Sqm 53 of WRD
Rate as per item No.
(c) Geo membrane 1000 micron thick Sqm 54 of WRD

30
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5
Rate as per local
M-107 MAT- Geo nets Sqm competitive
00266 quotations
Rate as per item No.
M-108 (a)Geo textile 160 gsm Sqm 29 of WRD
Rate as per item No.
(b) Geo textile 200 gsm Sqm 30 of WRD
Rate as per item No.
(c) Geo textile 250 gsm Sqm 31 of WRD
Rate as per local
MAT-
M-109 competitive
00267 Geo textile filter fabric Sqm
quotations
MAT-
M-110 23
00268 GI bolt 10 mm Dia No’s
Rate covered in Item
No.36 of hire charges
M-111 Grouting pump with agitator Hour Of machinery of
Water Resources work
items
MAT-
M-112 8
00269 Grass (Doob) Kg
MAT-
M-113 11
00270 Grass (Fine) Kg

M-114 HDPE pipes 75mm dia Metre

Rate as per PH items
M-115 HDPE pipes 90mm dia Metre
MAT-
M-116 00271 Hedge plants Each
Rate as per local
MAT-
M-117 Helical pipes 600mm diameter Metre competitive
00272
quotations
MAT-
M-118 00273 Hot applied thermoplastic compound Litre
MAT-
M-119 HTS strand Tonne 44,234
00274
MAT-
M-120 Joint Sealant Compound Kg 65
00275
MAT- Jute netting, open weave, 2.5 cm square opening
M-121 Sqm 83
00276 for seeding and Mulching

31
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5
MAT-
M-122 72
00277 LDO for steam curing Litre

M-123 M.S. Clamps Kg Deleted

MAT-
M-124 00278 M.S. Clamps Kg
Rate as per local
MAT- market rate
M-125 00279 M.S. shoes @ 35 Kg per pile of 15 m Kg
MAT-
M-126 57,000
00280 Mild Steel bars Tonne
Modular strip/box seal expansion joint including
anchorage catering to a horizontal movement
beyond 70 mm and up to 140mm assembly Rate as per local
MAT- comprising of edge beams, central beam,2 competitive
M-127 00281 modules chloroprene seal, anchorage elements, Metre quotations
support and control system, all steel sections
protected against corrosion and installed by the
manufacturer or his authorized representative
Modular strip/box seal expansion joint catering to
a horizontal movement beyond 140mm and up to
210mm box/box seal joint assembly containing 3 Rate as per local
modules/cells and comprising of edge beams, two competitive
M-128 MAT- central beams, chloroprene seal, anchorage Metre quotations
00282 elements, support and control system, all steel
sections protected against corrosion and installed
by the manufacturer or his authorized
representative
MAT-
M-129 22
00283 Nipples 12mm No’s
MAT-
M-130 115
00284 Nuts and bolts Kg
MAT-
M-131 275
00285 Paint Litre
MAT-
M-132 00286 Pavement Marking Paint Litre
MAT-
M-133 00287 Paving Fabric Sqm
MAT- Rate as per local
M-134 00288 Perforated geo synthetic pipe 150 mm dia Metre competitive
quotations
MAT- Perforated pipe of cement concrete, internal dia
M-135 00290 100 mm Metre

MAT-
M-136 00291 Pesticide Kg

M-137 R.C.C Pipes 200 mm dia, 2.5 m long for drainage Metre Rate as per PH item

32
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5
MAT-
M-138 55
00292 Plastic sheath, 1.25 mm thick for dowel bars Sqm
MAT-
M-139 00293 Plastic tubes 50 cm dia , 1.2 m high No’s
Rate as per local
MAT- market rate
M-140 00294 Polymer braids Metre

MAT- Pre moulded Joint filler, 25 mm thick for expansion

M-141 Sqm 296
00295 joint.
MAT-
M-142 00296 Pre-coated stone chips of 13.2 mm nominal size Cum
Preformed continuous chloroprene elastomer or
MAT- closed cell foam sealing element with high tear
M-143 00297 strength, vulcanized in a single operation for the Rate as per local
full length of a joint to ensure water tightness. Metre competitive
quotations
MAT-
M-144 00298 Pre-moulded asphalt filler board Sqm

MAT- Pre-packed cement based polymer concrete of

M-145 00299 strength 45 Mpa at 28 days Kg

MAT-
M-146 193
00300 Sealant Primer Kg
MAT-
M-147 36
00301 Quick setting compound Kg
MAT-
M-148 315
00302 Random Rubble Stone Cum
RCC Pipe NP 4 heavy duty non pressure pipe
M-149 Metre
1000 mm dia
RCC Pipe NP 4 heavy duty non pressure pipe Rate as per PH
M-150 Metre
1200 mm dia items
RCC Pipe NP 4 heavy duty non pressure pipe
M-151 Metre
300 mm dia
MAT-
M-152
00303 Reflectorising glass beads Kg
MAT- Reinforcement strips 60 mm wide 5 mm thick as
M-153 00304 per clause 3102. (Copper Strips) Metre
MAT- Reinforcement strips 60 mm wide 5 mm thick as
M-154 00305 per clause 3102. (Galvanized carbon steel strips) Metre
Rate as per local
Reinforcement strips 60 mm wide 5 mm thick as competitive
MAT- per clause 3102. (Glass reinforced polymer/ fiber quotations
M-155 00306 reinforced polymer/polymeric strips) Metre
MAT- Reinforcement strips 60 mm wide 5 mm thick as
M-156 00307 per clause 3102. (Stainless steel strips) Metre
MAT- Reinforcement strips 60 mm wide 5 mm thick as
M-157 00308 per clause 3102. (Aluminum strips) Metre

33
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5
MAT-
M-158 Rivets Each 10
00309
Rate as per Item no. 2
M-159 Sand bags (Cost of sand and Empty cement bag) Per bag of miscellaneous
items
Rate as per local
MAT-
M-160 Sapling 2 m high 25 mm dia Each competitive
00310
quotations
MAT-
M-161 Scrap tyres of size 900 x 20 No’s 85
00311
MAT-
M-162 Seeds(Grass) Kg 23
00312
M-163 Cost of Selected earth Cum Deleted
MAT- Separation Membrane of impermeable plastic
M-164 00313 sheeting 125 micron thick Sqm
Rate as per local
MAT- competitive quotations
M-165 Sheathing duct Metre
00314
MAT-
M-166 Shrubs Each 20
00315
MAT- Sludge / Farm yard manure @ 0.18 cum per 100 Rate as per local
M-167 Cum
00316 sqm at site of work for turfing competitive quotations
M-168 Sodium vapour lamp Each As per Buildings SSR
MAT-
M-169 2,832
00317 Square Rubble Coursed Stone Cum
Steel circular hollow pole of standard specification
MAT-
M-170 for street lighting to mount light at 5 m height Each
00318 Rate Obtained from
above deck level
Electricity/Municipal
Steel circular hollow pole of standard specification
MAT- Departments
M-171 forstreet lighting to mount light at 9 m height Each
00319
above road level
MAT- Steel drum 300 mm dia 1.2 m high/empty bitumen
M-172 00320 drum No’s
As per local competitive
MAT- Steel helmet and cushion block on top of pile head market rate
M-173 00321 during driving. Kg
MAT-
M-174 Steel pipe 25 mm external dia as per IS:1239 Metre 326
00322
MAT-
M-175 Steel pipe 50 mm external dia as per IS:1239 Metre 641
00323
MAT-
M-176 Steel wire rope 20 mm Kg 201
00324
MAT-
M-177 Steel wire rope 40 mm Kg 223
00325

34
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5
Rate as per local
MAT-
M-178 competitive
00326 Strip seal expansion joint Metre
quotations
Rate as per item no.62
M-179 Structural Steel(HYSD/TMT bars) Tonne of Material rates of
WRD
Rate as per item no.70
Super plasticizer admixture IS marked as per 9103- of Material rates of
M-180 Kg
1999 WRD
Rate as per local
MAT- Synthetic Geo grids as per clause 3102.8 and
M-181 Sqm competitive
00327 approved design and specifications.
quotations
Through and bond stone Rate as per item no.75
M-182 Each of Material rates of
(a) 20X20x30 to 45 cm long WRD.
Rate as per item no.76
Through and bond stone
Each of Material rates of
(b) 25X25x45 to 60 cm long WRD.
Rate as per item no.77
Through and bond stone
Each of Material rates of
(c) 30X30x65 to 75 cm long WRD.
MAT-
M-183 60
00328 Tie rods 20mm diameter No’s

M-184 Tiles size 300 x 300 mm and 25 mm thick Each

As per Building SSR
M-185 Timber Cum
MAT-
M-186 00329 Traffic cones with 150 mm reflective sleeve No’s Rate as per local
competitive
MAT- Tube anchorage set complete with bearing plate,
M-187 No’s quotations
00330 permanent wedges etc
MAT-
M-188 3,159
00331 Un slaked lime Tonne

M- MAT- Water charges(Urban) 135

KiloLitre
189(a) 00332
MAT-
(b) 105
00333 Water charges(Rural) KiloLitre

M-190 Water based cement paint Litre As per Building SSR

MAT-
M-191 155
00334 Welded steel wire fabric Kg
MAT-
M-192 281
00335 Wire mesh 50mm x 50mm size of 3mm wire Kg

35
 Part I - Materials not covered under WR Work items basic data – Common SoR 2024-25

CFMS S. Rate for

Sl. No. Description Unit
CODE 2024-25
1 2 3 4 5

M-193 Wooden ballies 2" Dia for bracing Each

As per Building SSR
M-194 Wooden ballies 8" Dia and 9 m long Each
MAT-
M-195 1,337
00336 Wooden packing Cum

MAT- Wooden staff for fastening of flag 25 mm dia,

M-196 Each 85
00337 one m long

per cm
MAT-
Item 00338 Printing new letter and figures of any shade (ii) height 2
8.3 English Roman per
letter
Item
Painting Two Coats on New Concrete Surfaces Sqm
8.8
As per Building SSR
Item
Painting angle iron post Two Coats Sqm
8.9

Miscellaneous Items

Benching old embankment slopes

1 MAT- RM 7
00339 0.45 X 0.45 M
Laying Sand Bags in the stipulated places including
cost of empty cement bag, sand, thread,
stiching charges and labour charges with 13.615 %
overhead charges and contractors profits. (sand
rate for filling is considered) per
2 MAT- 38
Note: During the emergency conditions such as bag
00340
floods and other natural calamities, the above rate
is allowed to enhance by 25% for 1st warning level
and above, keeping in view of the difficulty in
availability of labour and vehicles.
MAT-
3 191
00341 Rough stone for revetment 225mm thick Cum

MAT- Eradication of Weed growth from Drains, Canals by

4 Sqm 3
00342 spraying Chemicals
MAT-
5 113
00343 Thinner Ltr
MAT-
6 296
00344 Gear Oil Ltr
MAT-
7 120
00345 Cardium compound Kg

36
 Conveyance Charges of Material – Common SoR 2024-25

Conveyance Charges
of Material

37
 Conveyance Charges of Material – Common SoR 2024-25

CONVEYANCE CHARGES OF MATERIALS AS PER SoR 2024-25 (COMMON TO ALL DEPARTMENTS).

LEAD, LIFT, LOADING AND UNLOADING CHARGES FOR MATERIALS
FOR THE YEAR: 2024-25

1. For total lead up to 150 m (including initial lead) lead charges by head load only shall be
adopted irrespective of mode of conveyance.
2. For total lead exceeding 150 m conveyance by mechanical means only shall be adopted
irrespective of mode of conveyance.
3. The rates for loading at quarry including idle hire charges of trucks and hire charges per
for each kilometer and up to 5 km are cumulative and inclusive of total charges for
Preceding lead.
4. Unless otherwise specified lead charges for Earth / Sand / Gravel / Aggregates and
Stones are for loose volume and not for compacted or in-situ volume.
5. The rates for lift charges, lead charges, hire charges are cumulative and inclusive of rates
for preceding lift, lead and hire charges.
6. Lift charges are not payable where conveyance of materials is by mechanical means to
final placing point.
7. Loading and unloading charges are not payable for conveyance by head load.
8. Loading charges are not payable for conveyance by mechanical means for disposal of
excavated materials beyond initial lead of 50 m wherever specified.
9. Loading and unloading charges are not payable for conveyance by mechanical means for
disposal of excavated materials beyond initial lead of 1 km wherever specified.
10. The rates for unloading of materials except earth, sand, gravel, coarse aggregate, rubble,
size stone and cut stone are inclusive of stacking.
11. Hire charges are per 1KM for tippers and trucks for transport of materials from work site
to dump yard and other places are cumulative & includes previous km up to 5 kms.
12. The lead & lift charges are exclusive of contractor's profit and overhead charges of
13.615%.
13. The loading and unloading charges are also exclusive of Contractor's profit and overhead
charges of 13.615%.
14. During the BoCEs meeting held on 10.06.2015, the BoCEs has recommended to withdraw
lead charges, loading and unloading charges for Cement as per the minutes of meeting
of Sub-Committee held on 29.06.2015. (The conveyance charges, loading & unloading
charges for cement are displayed for information purpose only).
15. As per the BOCE meeting held on 21.08.2019 in order to simplify the procedure of
adding lead charges to the data items in the CFMS work module, the BOCE
recommended to delete the contractor profit and over head charges from the calculation
of Lead, Lift, Loading and Unloading charges. But at the time of preparation of estimates
the contractor profit and over head charges on Lead, Lift, Loading and Unloading
charges shall be added as usual.

38
 Conveyance Charges of Material – Common SoR 2024-25

A. (LEAD) CONVEYANCE CHARGES FOR MATERIALS

BY HEAD LOAD FOR THE YEAR: 2024-25

Earth / Sand /Gravel / Cement / PCC slab/

Total distance Murrum/ Lime/ Surki/
Sl Reinforcement Shahbad slab / CC
(Total lead includes Size stone block/ BS slab/
No. steel Str steel
initial lead) / Cut stone Rubble / Late-rite / Wood
Rs / tonne
Coarse aggregate Rs / cum
1 2 3 4 5
1 Total lead up to 50 m Initial lead Initial lead Initial lead
(covered by item rate)
2 Total lead up to 100 m 85.00 49.58 108.18

3 Total lead up to 150 m 170.00 99.17 216.36

Notes: 1. No loading or unloading charges are admissible for conveyance by head load.
2. For total lead exceeding 150 m conveyance charges by mechanical
means only shall be adopted irrespective of mode of conveyance.

B. (LEAD) CONVEYANCE CHARGES FOR MACHINERY PER KILOMETER FOR

TRANSPORTING MATERIALS BY TIPPERS AND TRUCKS EXCLUDING LOADING,
UNLOADING AND IDLE HIRE CHARGES OF MACHINERY FOR THE YEAR: 2024-25
(No loading and unloading charges allowed for machinery loading and unloading)

(Lead) (Lead) charges

(Lead) charges for (Lead) charges for trucks per (Lead)
charges for trucks for for trucks for cu.meter for (Lead) charges
tippers for Rubble/Size Cement/ Steel/ PCC slabs/ charge for
Sl Earth / Sand trucks
Distance stones/ Cut RCC poles/ AC & Shahabad s for
No. /Gravel / per
Stones/ GI sheets/ slabs/ CC & 1000
Murrum/ 1000
Lime/ Surki/ Coarse Packed Laterite litres nos. of
per cu.meter aggregate materials/ tonne blocks/ bricks
per cu.meter Wood/ cum
1 2 3 4 5 6 7 8
1 Lead up 38.00 36.54 22.84 53.74 23.05 60.90
to 1 km
2 Lead up 53.20 51.16 31.97 75.23 32.27 85.26
to 2 km
3 Lead up 70.93 68.21 42.63 100.31 43.02 113.68
to 3 km
4 Lead up 86.13 82.82 51.77 121.80 52.24 138.04
to 4 km
5 Lead up 101.33 97.44 60.90 143.30 61.46 162.40
to 5 km
for Every 15.20 14.62 9.14 21.49 9.22 24.36
km
6 beyond 5
km up to
30 km
for Every 12.67 12.18 7.61 17.91 7.68 20.30
7 km
beyond
39
 Conveyance Charges of Material – Common SoR 2024-25

C. LOADING AND UNLOADING CHARGES BY MANUAL MEANS

(idle hire charges of trucks are not added)

Rubble/
Earth
/ Sand size stone/ Brick
Description of /Gravel cut stone/ Cement in Steel in work
Sl No. Coarse
item Murrum/ Rs/tonne Rs./tonne Rs/1000
/ Surki/ aggregate No
Rs / cum , Lime in
Rs/cum
1 2 3 4 5 6 7
1 Loading 28.21 56.42 93.09 111.58 77.58
2 Unloading 14.11 28.21 93.09 111.58 77.58

D. LOADING AND UNLOADING CHARGES BY MANUAL MEANS

(Including idle hire charges of trucks)

Rubble/
Earth / size
Sand stone/ cut brick
Description of /Gravel stone/ cement in steel in work
Sl No. Murrum/ Rs/tonne Rs./tonne Rs/1000
item Coarse
Surki/ No
Rs / cum aggregate
, Lime in
Rs/cum
1 2 3 4 5 6 7

1 Loading 138.94 167.15 214.89 233.38 278.55

2 Unloading 50.87 83.58 214.89 233.38 278.55

E. LOADING AND UNLOADING CHARGES BY MECHANICAL

MEANS
(Including idle hire charges of trucks)
Earth / Sand /Gravel Rubble/ size stone/ cut
Sl No. Description of item Murrum/ Surki/ stone/ Coarse
Rs / cum aggregate, Lime in
Rs/cum
1 2 3 4

1 Loading 60.12 119.48

2 Unloading 19.19 19.19

40
 Conveyance Charges of Material – Common SoR 2024-25

F. LIFT CHARGES FOR MATERIALS BY HEAD LOAD

Earth / Sand
PCC
/Gravel Murrum/ Cement /
Total lift (Total slab/ Shahbad
Sl Lime/ Surki/ Size Reinforcement
lift includes slab / CC block/
No. stone / Cut stone steel Str steel
initial lift) BS slab / Laterite
Rubble / Coarse Rs / tonne
aggregate / Wood Rs / cum
Rs / cum
1 2 3 4 5
Total lift up to 3 m
1 (covered by item Initial lift Initial lift Initial lift
rate)
For Every 1.00 Lift
2 beyond initial lift of 9.92 7.17 13.22
3 meters

41
 Machinery Hire Charges – Common SoR 2024-25

HIRE CHARGES

42
 Machinery Hire Charges – Common SoR 2024-25

HIRE CHARGES OF PLANT &

MACHINERY FOR THE YEAR: 2024-25
Sl. Hire Fuel Crew Total in
DESCRIPTION UNIT CODE CODE CODE
No Charges Charges Charges Rs
1 Agitator car /
HIR- HIR- LAB-
Transit mixer Hour 794.00 1473.48 443.04 2710.52
00001 00135 00317
2 cum
2 Air compressor HIR- HIR- LAB-
Hour 105.73 285.52 260.33 651.58
5 cmm ( electric ) 00002 00136 00318
3 Air compressor HIR- HIR- LAB-
Hour 237.70 1205.58 333.22 1776.50
7 cmm ( diesel ) 00003 00137 00319
4 Air compressor HIR- HIR- LAB-
Hour 132.59 380.69 260.33 773.61
7 cmm ( electric ) 00004 00138 00320
5 Air compressor HIR- HIR- LAB-
Hour 280.01 1506.96 333.22 2120.19
8.5 cmm (diesel) 00005 00139 00321
6 Air compressor HIR- HIR- LAB-
Hour 172.20 475.86 260.33 908.39
8.5 cmm (Electric) 00006 00140 00322
7 Air compressor HIR- HIR- LAB-
Hour 136.20 1057.45 277.68 1471.33
15 cmm (electric) 00007 00141 00323
8 Angle Dozer HIR- HIR- LAB-
Hour 1651.08 1030.76 369.20 3051.04
90 hp 00008 00142 00324
9 Batching plant HIR- HIR- LAB-
Hour 112.00 126.90 535.28 774.18
0.5cum (6 cum/hr) 00009 00143 00325
10 Batching plant
HIR- HIR- LAB-
2 x 1.00 cum Hour 396.19 380.69 535.28 1312.16
00010 00144 00326
(15 cum/hr)
11 Batching plant
HIR- HIR- LAB-
2 x 1.50 cum Hour 606.69 465.28 535.28 1607.25
00011 00145 00327
(50 cum/hr)
12 Bending machine HIR- HIR- LAB-
Hour 43.53 126.90 208.26 378.69
3000 x 12 mm 00012 00146 00328
13 Clam shell and HIR- HIR-
Hour 6.06 0.00 0.00 6.06
hoisting ropes 00013 00147
14 Concrete bucket HIR- HIR-
Hour 17.47 0.00 0.00 17.47
1.5 cum 00014 00148
15 Concrete hand HIR- HIR-
Hour 5.69 0.00 0.00 5.69
mixer 45 / 30 ltr 00015 00149
16 Concrete mixer HIR- HIR- LAB-
Hour 54.70 133.95 347.10 535.75
300 / 200 (diesel) 00016 00150 00329
17 Concrete mixer
HIR- HIR- LAB-
300 / 200 ltr Hour 53.42 42.30 347.10 442.82
00017 00151 00330
(electric)
18 Concrete mixer
HIR- HIR- LAB-
600 / 400 (diesel) / Hour 93.08 267.90 347.10 708.08
00018 00152 00331
0.28 cum
19 Concrete mixer
HIR- HIR- LAB-
600 / 400 ltr Hour 91.19 84.60 347.10 522.89
00019 00153 00332
(electric)
43
 Machinery Hire Charges – Common SoR 2024-25
Crew
Sl. Hire Fuel Total in
DESCRIPTION UNIT CODE CODE CODE Charge
No Charges Charges Rs
s
20 Concrete paver HIR- HIR- LAB-
Hour 351.40 0.00 666.43 1017.83
100 sqm / hr 00020 00154 00333
HIR- HIR- LAB-
21 Convey mucker Hour 819.19 294.40 277.68 1391.27
00021 00155 00334
Core drilling
HIR- HIR- LAB-
22 machine / Drilling Hour 318.25 401.86 443.04 1163.15
00022 00156 00335
equipment
Diesel generating HIR- HIR- LAB-
23 Hour 67.95 1071.63 208.26 1347.84
set 30 KVA 00023 00157 00336
Diesel generating HIR- HIR- LAB-
24 Hour 84.89 1607.43 208.26 1900.58
set 50 KVA 00024 00158 00337
HIR- HIR- LAB-
25 Diesel Loco 45 hp Hour 380.91 904.18 260.33 1545.42
00025 00159 00338
Dewatering pump HIR- HIR- LAB-
26 Hour 10.34 133.95 173.47 317.76
5 hp ( diesel ) 00026 00160 00339
Dewatering pump HIR- HIR- LAB-
27 Hour 3.15 42.30 130.08 175.53
5 hp ( electric ) 00027 00161 00340
Dewatering pump HIR- HIR- LAB-
28 Hour 16.25 267.90 173.47 457.62
10 hp ( diesel ) 00028 00162 00341
Dewatering pump HIR- HIR- LAB-
29 Hour 7.03 84.60 130.08 221.71
10 hp ( electric 00029 00163 00342
Dewatering pump HIR- HIR- LAB-
30 Hour 51.30 535.81 173.47 760.58
20 hp ( diesel ) 00030 00164 00343
Dewatering pump HIR- HIR- LAB-
31 Hour 13.18 169.19 130.08 312.45
20 hp ( electric) 00031 00165 00344
HIR- HIR- LAB-
32 Drifter Hour 321.65 0.00 553.80 875.45
00032 00166 00345
HIR- HIR- LAB-
33 Drilling jumbo Hour 389.85 72.34 277.68 739.87
00033 00167 00346
HIR- HIR- LAB-
34 Dumper 4.5 cum Hour 628.34 675.13 354.43 1657.90
00034 00168 00347
Geophysical
HIR- HIR-
35 Electric resistivity Hour 108.70 0.00 0.00 108.70
00035 00169
meter
HIR- HIR- LAB-
36 Grouting pump Hour 23.95 42.30 416.52 482.77
00036 00170 00348
Guniting / sand HIR- HIR- LAB-
37 Hour 123.76 0.00 347.10 470.86
blast equipment 00037 00171 00349
Ice plant &
HIR- HIR- LAB-
38 accessories Hour 185.82 1205.50 208.26 1599.58
00038 00172 00350
30 t / day
HIR- HIR- LAB-
39 Jack hammer Hour 19.11 0.00 520.65 539.76
00039 00173 00351
Needle vibrator HIR- HIR- LAB-
40 Hour 8.39 30.14 249.86 288.39
40 mm ( petrol ) 00040 00174 00352
44
 Machinery Hire Charges – Common SoR 2024-25
Sl. Hire Fuel Crew Total in
DESCRIPTION UNIT CODE CODE CODE
No Charges Charges Charges Rs
Needle vibrator HIR- HIR- LAB-
41 Hour 8.01 8.46 249.86 266.33
40 mm ( electric ) 00041 00175 00353
Needle vibrator 60 HIR- HIR- LAB-
42 Hour 10.26 45.20 249.86 305.32
mm ( petrol ) 00042 00176 00354
Needle vibrator 60 HIR- HIR- LAB-
43 Hour 8.33 12.68 249.86 270.87
mm ( electric ) 00043 00177 00355
Planing machine HIR- HIR- LAB-
44 Hour 132.55 126.90 333.22 592.67
4 m stroke 00044 00178 00356
Plate shearing
HIR- HIR- LAB-
45 machine up to Hour 47.29 169.19 221.52 438.00
00045 00179 00357
12 mm
Pneumatic placer HIR- HIR- LAB-
46 Hour 168.96 0.00 135.53 304.49
0.5 cum 00046 00180 00358
HIR- HIR- LAB-
47 Pneumatic tamper Hour 20.15 0.00 416.52 436.67
00047 00181 00359
Pug cutting HIR- HIR-
48 Hour 6.82 4.22 0.00 11.04
machine 00048 00182
HIR- HIR-
49 Pusher leg Hour 14.83 0.00 0.00 14.83
00049 00183
Road roller diesel HIR- HIR- LAB-
50 Hour 192.67 1205.58 339.46 1737.71
10 t 00050 00184 00360
Shovel 0.50 cum HIR- HIR- LAB-
51 Hour 1048.36 803.71 369.20 2221.27
75 hp 00051 00185 00361
Shovel 0.85 cum
HIR- HIR- LAB-
52 110 hp / Hydraulic Hour 1751.36 1473.48 369.20 3594.04
00052 00186 00362
Excavator
Stationery derric HIR- HIR-
53 Hour 87.15 0.00 0.00 87.15
crane 00053 00187
HIR- HIR- LAB-
54 Tipper 5 / 5.5 cum Hour 483.37 506.34 276.90 1266.61
00054 00188 00363
Tipping tub HIR- HIR-
55 Hour 72.79 0.00 0.00 72.79
1.5 cum 00055 00189
Tower crane HIR- HIR- LAB-
56 Hour 865.81 219.95 295.36 1381.12
5 tonne 00056 00190 00364
Transformer HIR- HIR-
57 Hour 5737.38 0.00 0.00 5737.38
250 KVA 00057 00191
Truck 10 t / Truck
HIR- HIR- LAB-
58 5.5 cum per Hour 437.69 506.34 273.98 1218.01
00058 00192 00365
10 tonnes
Truck mounted HIR- HIR- LAB-
59 Hour 552.23 506.34 273.98 1332.55
derric crane 5 t 00059 00193 00366
Upright drilling HIR- HIR- LAB-
60 Hour 23.83 42.30 304.20 370.33
machine/Grinder 00060 00194 00367
Ventilation fan HIR- HIR- LAB-
61 Hour 12.70 169.19 44.87 226.76
20 hp 00061 00195 00368

45
 Machinery Hire Charges – Common SoR 2024-25
Sl. Hire Fuel Crew Total in
DESCRIPTION UNIT CODE CODE CODE
No Charges Charges Charges Rs
Vibratory pad foot HIR- HIR- LAB-
62 Hour 1330.63 1741.39 416.52 3488.54
roller 8 t 00062 00196 00369
HIR- HIR- LAB-
63 Wagon drill Hour 199.88 0.00 443.04 642.92
00063 00197 00370
Water tanker HIR- HIR- LAB-
64 Hour 448.93 506.34 273.98 1229.25
8000 ltr 00064 00198 00371
HIR- HIR-
65 Welding set Hour 17.29 101.52 0.00 118.81
00065 00199
Winch 35 hp HIR- HIR- LAB-
66 Hour 139.99 207.26 416.52 763.77
(electric ) 00066 00200 00372
Hydraulic Truck HIR- HIR- LAB-
67 Hour 3264.25 1987.99 833.66 6085.90
Crane 30T 00068 00202 00373
Hydraulic Truck HIR- HIR- LAB-
68 Hour 2307.88 1758.13 833.66 4899.67
Crane 16T 00069 00203 00374
Heavy Duty Airless
HIR- HIR-
69 Spray Painting Hour 123.07 123.07
00070 00204
Equipment
Concrete Placer
HIR- HIR- LAB-
70 Pump (25 cum/hr) Hour 943.97 507.58 260.33 1711.88
00071 00205 00375
(Electric) / 30 Cum
Tractor with HIR- HIR-
71 Hour 500 500
2T roller 00067 00201

46
Government of Andhra Pradesh

COMMON SCHEDULE OF RATES

FOR THE YEAR 2024-25
(Effective from 1st June, 2024)
R&B Department, AP
ROAD & BRIDGE WORKS
 INDEX
PART-II
ROAD & BRIDGE WORKS

Sl. No. Description Page No.

From To
1 Preamble 1 4
2 Labour Rates 5 8
3 Material & Work Item Rates 9 18
4 Hire Charges of Plant & Machinery for Road & Bridge 19 22
Works
PREAMBLE
1.0 AREA ALLOWANCES:

A) CORPORATIONS & MUNICIPALITIES:

a) (i) 25% extra over the rates on labour component of works is allowed in all
Municipal Corporation Limits of Andhra Pradesh except Greater Visakhapatnam
Municipal Corporation and Vijayawada Municipal Corporation (Upto a belt of 12 kms
from Municipal corporation limits) and other Municipal Corporations as notified by the
Government from time to time.
(ii) 40% extra over the rates on labour component of works for Greater Visakhapatnam and
Vijayawada Municipal Corporation limits (Upto a belt of 12 kms from Municipal
corporation limits)
(iii) 40% extra over the rates on labour component of works for Amaravati Capital City area
(217 Sq. Km) as declared by the Govt. vide GO MS No. 141 MA&UD (M2) Dept.,
dt. 9.6.2015 (This is introduced as per the Govt. instructions issued in Govt. Memo No.
668755/ Reforms/ 2017 dt. 14.7.2017).
b) Allow 20% extra over basic rates on labour component of works in all District
Headquarters and the remaining Municipal limits (up to a belt of 12 Kms. from Municipal
limits)
c) For works at Tirumala Hills in Chittoor District, 40% extra over the basic rates of labour
component is allowed.
d) For works at Horsely hills in Chittoor District, 30% extra over the basic rates of labour
component is allowed.
e) For works located inside Tirumala Temple, 20% extra over the basic rate of labour component
specified for Tirumala Hills is allowed.
f) For Works located inside T.T.D Temples of Sri Padmavathi Ammavari Temple,Tiruchanoor,
Sri Govindaraja Swamy Temple at Tirupathi, Sri Kapileswara Swamy Temple,
Kapilatheertham, Tirupathi and Sri Kalyana Venkateswara Swamy Temple, Srinivasa
Mangapuram , 20% extra over the basic rates of labour component for Tirupathi Municipal
Corporation is allowed.

B) JAIL COMPOUNDS:

20% extra is allowed over labour rates for the works in the Jail compounds. Only equivalent
number of Man Mazdoor shall be provided in the Jail premises and no Women Mazdoor are
allowed inside.

C) INDUSTRIAL AREA:
a. 20% Extra over basic rates on labour component works allowed for works situated within 10
Kms belt of Industrial area of Ibrahimpatnam, Vuyyuru, Jaggaiahpeta in Krishna District,
Macherla, Gurajala, Challapalli in Guntur District, Garividi in Vijayanagaram District,
Renigunta in Chittoor District, Yerraguntla & Mangampet in Kadapa District, Hindupur,
Tadipatri, Anantapur, Guntakal, Rayalcheruvu, Yadiki of Anantapur District, Adoni, Dhone,
Cement Nagar, Nandyal, Kurnool, Yemmiganur & Bethamcherla of Kurnool District and
Anakapally of Vishakhapatnam District.

D) AGENCY / TRIBAL AREAS:

a) 25% extra allowed for the works located with in the interior Agency / Tribal limits, i.e.
for the works located with in & upto16 KMs from any all weather route inside Agency /
Tribal.
b) 40% extra allowed for the works located with in the interior Agency / Tribal limits, i.e. for
the works located beyond 16 KMs from any all weather route inside Agency / Tribal.

1
NOTE: 1. No extra percentage is permissible in respect of Forest produce such as Bamboo, Rellu
grass and for all materials obtained from outside the Agency / Tribal.

2. The extra percentage under Agency / Tribal areas allowance may be allowed on the
labour component and on the labour charges in the rates for conveyance of materials.

3.The extra percentage on cost of materials in Agency / Tribal areas can be allowed on the
labour component only, if they are manufactured in the Agency / Tribal areas itself
except Forest produce.

E) GHAT ROADS:

For Ghat Roads steeper than 1 in 20, the length of the road may be taken as 1.5 times the
existing length of the road for the purpose of leads only for conveyance of materials based on the
certificate for the Ghat Road given by the Superintending Engineer concerned.

Note: Under compelling circumstances, the concerned Chief Engineer can adopt the
equivalent length of road as 2 ½ times of actual length.

Note for area allowances:

If more than one area allowance ( such as those ) for (1) Municipalities (2) Agency /
Tribal areas (3) Industrial areas are applicable for a particular situation, only the maximum out
of the allowable percentages is to be allowed.

2.0 WATER LEADS:

The following labour is allowed for conveyance of water for every ½ Kilometer lead or part
there of over the initial lead of ½ kilometer.

a) Cement concrete : 1.5 Women Mazdoor / Cum.

b) Masonry : 1.0 Woman Mazdoor/ Cum.
c) Plastering : 0.5 Woman Mazdoor/ 10 Sq.m

Note:- For Water leads of over 2 KMs, specific approval of Chief Engineer concerned is necessary.

3.0 EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN

RESTRICTED PLACES: -

I) EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION

IN RESTRICTED PLACES: -

A. TRIAL TRENCHES:

1) Trial trenches of not more than 2 metres in width …25% extra

B. TRIAL PITS:

1) Up to 2 Metres depth … 25% extra

2) 2 Metres to 4 Metres depth … 50% extra

2
 3) 4 Metres to 6 Metres depth … 75% extra
4) 6 Metres to 8 Metres depth … 100% extra
5) 8 Metres to 9 Metres depth … 150% extra
6) More than 9 Metres depth … 200% extra
II) EXCAVATION IN RESTRICTED PLACES:-

I) Foundation of Buildings …. 75% extra

II) For pipe lines where the depth is less ..… 75% extra
than 1.5 times the width
III) For pipe lines where the depth is .… 120% extra
1.5 times or more than the width
IV) Silt removal in restricted areas such … 120% extra
U. T’s., Culverts and Syphons.
V) Excavation of field channels … 75% extra
VI) For narrow trenches not more than
2 meters in width and depth not less
than twice the width and for excavation … 75% extra
of road boundary drains, model sections
of canals.
VII) High berm cutting of not more than … 50% extra
150 mm average thickness and
Sectioning for roads

Note: 1) The extra percentage is allowed over rate for corresponding soil. It includes the charges
for all lifts and initial lead but does not include dewatering charges if any in respect of all
the items under ( A) and (B) above.
2) The above extra percentages in respect of excavation in hard rock for restricted places
are to be allowed for (2/3) rd of the cost and shall not to be allowed in respect of items
involving blasting component which may be taken as 1/3 of the cost.
4.0 Proportion of First class and 2nd class workmen under Skilled Labour:

30% of the skilled labour provided in the data may be taken as 1st Class and the remaining
70% as 2nd Class.

5.0 Revetment and apron works:

I) The size of stone for the volume range ( 0.015 to 0.030 Cum) shall not be less than
(0.30 X 0.30 X 0.15 to 0.30 X 0. 225 X 0.225m)
II) The size of stone for the volume range (0.011 to 0.015 Cum) shall not be less than
(0.30 X 0.225 X 0.15 to 0.225 X 0.225 X 0. 225 m)
III) The rate of labour component as per the standard data book is to be adopted for
revetment work only. However for apron work Rs. 3.00 per cum. should be
deducted.

6.0 Deep cuts:

Deep cuts are defined as reaches of canal where excavation in all soils is for a depth
of excavation 6m and more.The following increase over normal rates is permitted in deep
cuts on a graded basis.

I) Up to 6 m excavation: The S. S. R. of corresponding classification of

earth work excavation is applicable.
II) Beyond 6 m and up to 9 m excavation - 9% extra
III) Beyond 9 m and up to 12 m excavation - 12% extra

3
 IV) Beyond 12 m and up to 16 m excavation - 15% extra
V) Beyond 16 m and up to 30 m excavation - 20% extra
VI) Beyond 30 m excavation - 40% extra

NOTE : 1) The extra percentage is only on basic rate. 2) The above percentage are not applicable
for “LEADS & LIFTS”. 3) The above extra percentages are to be allowed only on
items excluding the blasting component which may be taken as 1/3 of the rate.

7.0 The conveyance of bitumen for bulk and packed may be admitted as follows:

Packed -- Rs. 1.90 per Km/ MT

Bulk -- Rs. 1.90 per Km/ MT (round the trip)

8.0 SEIGNIORAGE CHARGES:

Seigniorage charges for materials as fixed by the Government in G.O.Ms.No.37 (Industries

and commerce M III department) Dt. 15-03-2024 read with G.O.Ms.No.18 (Industries and
commerce M II department) Dt. 13-01-2016 & G.O.Ms.No.42 (Industries and commerce M
III department) Dt. 07-06-2021 may be added in the data of rates in the estimate. The
Provision towards Contractor's Profit and Overhead charges should not be operated on the
Seigniorage Charges while adding Seigniorage Charges to the data in the estimate. In case of
revision, the revised rates as fixed by Mines and Geology Department have to be adopted.

9.0 Earthwork excavation rate for Trench cutting, formation of embankment & shoulders,
foundations, removal of unserviceable soil etc., is to be arrived based on the Machinery
adopted in the MoRTH Standard data book for excavation of soil.

10.0 All the Materials and Machinery Hire charges are excluding Taxes.

4
LABOUR RATES
 S.S. S o Rate for
Si. CFMS Unit
Item Description 2024-25 in Remarks
No Code (Per)
No. Rs.
1 2 3 4 5 6 7
(A) Skilled Workmen
First Class
1 Stone cutter Day As per WR Dept.
a LAB-00039
(S.No.39)
2 Mason & Brick Layer day As per WR Dept.
b LAB-00011
(S.No.11)
3 Carpenter day As per WR Dept.
c LAB-00004
(S.No.4)
4 Painter day As per WR Dept.
d LAB-00035
(S.No.35)
5 Plumber day As per WR Dept.
e LAB-00036
(S.No.36)
6 Welder day As per WR Dept.
f LAB-00041
(S.No.41)
7 Fitter day As per WR Dept.
g LAB-00006
(S.No.6)
8 Electrician day As per WR Dept.
h LAB-00005
(S.No.5)
9 Cook day As per WR Dept.
1 LAB-00125
(S.No.2)
10 Mechanic day As per WR Dept.
2 LAB-00012
(S.No.12)
11 3 LAB-00043 Rigger day 735.00
12 4 LAB-00044 Rigger Syrang day 735.00
13 5 LAB-00045 Well Sinker day 735.00
14 Blaster day As per WR Dept.
6 LAB-00003
(S.No.3)
15 Bar bender day As per WR Dept.
3 LAB-00001
(S.No.1)
16 Tipper and Heavy Vehicle Driver above 12 T day As per WR Dept.
7 LAB-00015
(S.No.15)
17 Tanker and medium Vehicle driver (7.5 T to
LAB-00046 day 730.00
12 T)
18 LAB-00047 Tanker and Light Vehicle driver up to 7.5 T day 560.00
19 LAB-00048 Wagon Drill Operator upto 7.5 T day 730.00
20 8 LAB-00049 Lorry and Heavy Vehicle Driver above 12 T day 765.00
21 Road Roller Driver (7.5 T to 12 T) day As per WR Dept.
LAB-00027
(S.No.27)
22 Road Roller Driver 7.5 T day Deleted
23 9 Tractor Driver above 12 T day Deleted
24 Tractor Driver (7.5 T to 12T) day Deleted
25 LAB-00050 Tractor Driver 7.5 T day 705.00
Operator
26 10 LAB-00051
Pan Mixer day 750.00
27 Concrete Mixer day As per WR Dept.
LAB-00016
(S.No.16)
 S.S. S o Rate for
Si. CFMS Unit
Item Description 2024-25 Remarks
No Code (Per)
No. in Rs.
1 2 3 4 5 6 7
28 Vibrator day As per WR Dept.
LAB-00032
(S.No.32)
29 LAB-00052 Compresser day 705.00
30 Jack Hammer day As per WR Dept.
LAB-00023
(S.No.23)
31 Driller day As per WR Dept.
LAB-00034
(S.No.34)
32 LAB-00053 Boring Maistry day 675.00
As per WR Dept.
33 11 LAB-00024 Pump operator day (S.No.24)
34 12 LAB-00054 Turner Grade-I day 735.00
As per WR Dept.
35 13 LAB-00135 Wireless Operator day (S.No.12)
Other Category
36 14 LAB-00055 Assistant Wireless Operator Day 665.00
37 Jeep Driver Day As per WR Dept.
15 LAB-00138 (S.No.15)
Other Category
38 Work Inspector with I.T.I qualification Day As per WR Dept.
16 LAB-00132 (S.No.9)
Other Category
39 Work Inspector with LCE, LME,L.E.E Day As per WR Dept.
17 LAB-00127 qualification (S.No.4)
Other Category
40 Work Inspector with B.E (Civil, Mechanical Day As per WR Dept.
18 LAB-00130 and Electrical) qualification (S.No.7)
Other Category
41 Work Inspector with Non-technical Day As per WR Dept.
19 LAB-00010
(S.No.10)
qualification SSLC/SSC/HSC
42 Mason Spl. Grade for Mossaic and Polished
20 LAB-00056 Day 725.00
shahabad stone floor
43 Typist / Job Typist Day As per WR Dept.
21a(i) LAB-00136 (S.No.13)
Other Category
Computer operator Day As per WR Dept.
a (ii) LAB-00134 (S.No.11)
Other Category
CAD Operator with Diploma in Engineering As per WR Dept.
b LAB-00137 /General degree with CAD certificate Day (S.No.14)
Other Category
(B) SEMI –SKILLED WORKMEN
SECOND CLASS
Mason Day As per WR Dept.
44 a LAB-00091 (S.No.35)
Semi-Skilled
Brick Layer and Stone Cutter Day As per WR Dept.
45 b LAB-00091 (S.No.35)
Semi-Skilled
Carpenter Day As per WR Dept.
46 c LAB-00060 (S.No.4)
Semi-Skilled
 S.S. S o Rate for
Si. CFMS Unit
Item Description 2024-25 Remarks
No Code (Per)
No in Rs.
1 2 3 4 5 6 7
Painter Day As per WR Dept.
47 d LAB-00093 (S.No.37)
Semi-Skilled
48 e deleted Day
Blacksmith (Skilled) Day As per WR Dept.
49 f LAB-00002 (S.No.2)
Skilled
50 g LAB-00098 Welder Day 645.00
51 h LAB-00099 Fitter Day 645.00
52 i LAB-00100 Electrician Day 645.00
53 2 LAB-00101 Caulker Day 645.00
54 4 LAB-00102 Tinker Day 645.00
55 5 LAB-00103 Sawyer Day 645.00
56 6 LAB-00104 Brick-Moulder Day 645.00
57 7 LAB-00105 Pot-tile turner Day 645.00
58 8 LAB-00106 Pan-tile turner Day 645.00
59 9 LAB-00107 Brick and Lime Kiln man/Glazer Day 645.00
Telephone Operator Day As per WR Dept.
60 10 LAB-00135 (S.No.12)
Other Category
61 11 LAB-00108 Hand Driller Day 645.00
62 12 LAB-00109 Quarry Man Day 645.00
Hammer Man Day As per WR Dept.
63 13 LAB-00081 (S.No.40)
Semi-Skilled
64 14 LAB-00110 Thatcher Day 645.00
65 15 LAB-00111 Fireman Day 645.00
66 16 LAB-00112 Cleaner/Helper Day 645.00
67 17 LAB-00113 Stone Packer Day 645.00
68 18 LAB-00114 Jawali Day 645.00
69 19 LAB-00115 Ex-Service man/Goorkha watchman Day 645.00
70 20 LAB-00116 Ratton Worker Day 645.00
71 21 LAB-00117 Mate Day 645.00
72 Head Mazdoor (Mukaddar) Day As per WR Dept.
1 LAB-00066 (S.No.10)
Semi-Skilled
(C) UNSKILLED WORKMEN
73 Man Mazdoor Day As per WR Dept.
2 LAB-00120 (S.No.3)
Un-Skilled
74 Watch Man Day As per WR Dept.
3 LAB-00122 (S.No.5)
Un-Skilled
75 Woman Mazdoor Day As per WR Dept.
5 LAB-00121 (S.No.4)
Un-Skilled
76 Helper/Cleaners/Sweepers/ Scavengers / Day
6 (b) LAB-00123
Choukidars /Security Guards/Office Boys 570.00
Note : Whenever unskilled workmen are engaged for cleaning of Sewers & Septic
Tanks, they may be paid double the above wages.
77 Single bullock with driver and cart Day As per WR Dept.
1 LAB-00062 (S.No.6)
Semi-Skilled
78 2 Bullock pair with driver Day 735.00
79 Bullock pair with driver and cart Day As per WR Dept.
3 LAB-00061 (S.No.5)
Semi-Skilled
80 Bullock pair with driver and cart with Day
4 LAB-00140 820.00
pneumatic tyres
81 5 Bullock pair driver and kapila Day Deleted
82 Nava with crew Day As per WR Dept.
6 LAB-00063 (S.No.10)
Semi-Skilled
83 7 LAB-00141 Punt thundal Day 550.00
84 8 LAB-00142 Punt lascar Day 550.00
1) The wage should not be less than the
Note: minimum wages of schedule of employment,
subject to out turn.
2) 25% extra over the corresponding labour
rates in respect of the work to be done during
night time subject to issue of certificate
accordingly by the concerned estimate
sanctioning authority for providing in the
data and by the concerned Executive
Engineer in charge of the work for payment.
The night time allowance is applicable only
to the works done under Greater
Visakhapatnam Municipal Corporation and
Vijayawada Municipal Corporation only.
MATERIAL & WORK ITEM
RATES
 RATES OF MATERIALS & WORK ITEMS
S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
(A) STONE AND ROAD MATERIALS
ROUGH STONE QUARRIED
INCLUDING WEDGING, BREAKING,
BURNING, SPLITTING.
1 22.a MAT-00405 For R.R Masonry Work (other than Granite, 1 cum 171.45
Dolomite and Trap)
2 b.i MAT-00341 For SS Revetment work 225 mm 1 cum 191.00 As per WR Dept.
(S.No.3) of
Miscellaneous items
3 b.ii MAT-00176 For SS Revetment work 300 mm 1 cum 206.00 As per WR Dept.
(M 003 of Materials
other than covered
under Irrigation
items)
4 b.iii MAT-00406 For SS Revetment work 450 mm 1 cum 148.55
5 c MAT-00407 Jeddy Stone above 450 mm to 600 mm 1 cum 223.00
6 d i MAT-00408 Laterite for revetment 225 mm 1 cum 129.50
7 d ii MAT-00409 Laterite for revetment 300 mm 1 cum 151.43
8 d iii MAT-00410 Granite for SS revetment 225 mm 1 cum 168.55
9 d iv MAT-00411 Granite for SS revetment 300 mm 1 cum 163.80
Note:- Only when other granite is not
available
10 e MAT-00412 Laterite for masonry 1 cum 148.55
11 f MAT-00413 Cyclopean stones above 0.2 cum 1 cum 278.10
12 g MAT-00302 For R.R.Masonry works ( granite, dolamite 1 cum 315.00 As per WR Dept.
and trap variety) (M 148 of Materials
other than covered
under Irrigation
items)
13 NOTE:- For items 22(a) to 22© and 22(g) 1 cum 70.00
add extra Rs /cum, wherever quarrying is
done by blasting
COURSED RUBBLE STONE
QUARRYING WEDGING, BREAKING,
BURNING AND SPLITTING FOR SS
FIRST SORT WORKS
14 23.a MAT-00414 Granite, Dolamite and trap 1 cum 274.30
15 23.b MAT-00415 For other varieties 1 cum 197.15
16 27 MAT-00416 Granite stone slabs for culverts, lintels and 1 cum 1810.50
copings (3 faces dressed coarsed rubble
masonry)
17 NOTE: - For items 23(a), 23(b) and 27 add 1 cum 82.00
extra Rs. Per Cum, wherever quarrying is
done by blasting
18 28 MAT-00417 Bond stones ( 600 x 200 x 200 mm ) each 47.60
 S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
19 B MAT-00418 Chainage stones and Centre line stones each 47.60
(750x150x150 mm)
20 31 MAT-00419 Demarcation Stones ( 900 x 150 x 150 mm) each 85.70
21 32.a MAT-00420 Guard Stones ( 1200 x 200 x 200 mm ) each 144.75
22 B MAT-00421 Guide Stones ( 800 x 150 x150 mm ) each 97.15
23 C MAT-00422 Carving letters and figures in stone up to 100 each 9.50
mm size
24 D MAT-00423 Carving letters and figures in stone above each 10.50
100 mm size
HARD BROKEN STONE OF GRANITE,
TRAP AND DOLERITE FREE FROM
DUST OBTAINED BY QUARRYING,
WEDGING, BREAKING, BURNING
AND SPLITTING
25 33.a MAT-00215 - do - 6mm size (SS 5) 1 cum 684.00 As per WR Dept.
(M 050 of Materials
excluding blasting
charges Rs.70/- and
Machine crushing
charges @ 25%)
26 b MAT-00216 - do - 10mm size (SS 5) 1 cum 860.00 As per WR Dept.
(M 051 of Materials
excluding blasting
charges Rs.70/- and
Machine crushing
charges @ 25%)
27 c MAT-00217 - do - 12mm size (SS 5) 1 cum 1024.00 As per WR Dept.
(M 052 of Materials
excluding blasting
charges Rs.70/- and
Machine crushing
charges @ 25%)
28 d MAT-00218 - do - 20mm size (SS 5) 1 cum 1285.00 As per WR Dept.
(M 053 of Materials
excluding blasting
charges Rs.70/- and
Machine crushing
charges @ 25%)

29 e MAT-00219 - do - 25mm size (SS 5) 1 cum 1230.00 As per WR Dept.

(M 054 of Materials
excluding blasting
charges Rs.70/- and
Machine crushing
charges @ 25%)

30 f MAT-00220 - do - 40mm size (SS 5) 1 cum 770.00 As per WR Dept.

(M 055 of Materials
excluding blasting
charges Rs.70/- and
Machine crushing
charges @ 25%)
 S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
31 g MAT-00424 - do - 50mm size (SS 5) 1 cum 434.30
32 h MAT-00425 - do - 60mm size (SS 5) 1 cum 399.05
33 i MAT-00426 - do - 65mm size (SS 5) 1 cum 360.95
34 j MAT-00427 - do - 75mm size (SS 5) 1 cum 289.50
35 k MAT-00428 - do - 75 to 100mm size (SS 5) 1 cum 236.20
36 NOTE:- (1) Add extra Rs. /- per cum for 1 cum 70.00
items 33 (a) to 33 (k) if the metal is obtained
by blasting
37 (2) Add 25% extra per cum if the metal is 1 cum 25%
obtained by machine crushing excluding cost
of blasting.
38 (3) Deduct Rs. /- per cum if the metal or 1 cum 9.9
rubble is obtained from surface stone and
boulders.
39 (4) Add Rs. /- per cum for selection of 1 cum 17.00
stones and boulders from excavated spoil
dumps for items 33 a to 33 k, when this
addition of Rs. /- per Cum is allowed,
1 cum 9.9
deduction of Rs. /- per Cum mentioned
under Note (3) above should invariably be
made.
SOFT BROKEN STONE SCREENED
AND FREE FROM DUST
40 33.l MAT-00429 - do - 40 mm size ( SS 5 ) 1 Cum 117.15
41 33.m MAT-00430 - do - 50 mm size ( SS 5 ) 1 Cum 105.70
42 33.n MAT-00431 - do - 60 mm size ( SS 5 ) 1 Cum 82.85
43 33.o MAT-00432 - do - 65 mm size ( SS 5 ) 1 Cum 74.30
44 33.p MAT-00433 - do - 75 mm size ( SS 5 ) 1 Cum 69.50
HARD BROKEN STONE OF GRANITE
TRAP DOLERITE AND DOLAMITE
FREE FROM DUST OBTAINED BY
QUARRYING WEDGING, BREAKING,
BURNING AND SPLITTING
(QUARTZITE AND BASALT WITH
AGGREGATE IMPACT OF LESS THAN
20)
45 33a MAT-00434 -do- 2.36 to 5 mm size (IRC&MORTH) 1 cum 487.00
46 b MAT-00435 -do- 5 to 7mm size (IRC&MORTH) 1 cum 716.00
47 c MAT-00436 -do- 9.5 to 11.2mm size (IRC&MORTH) 1 cum 840.00
48 d MAT-00437 -do- 12mm to 14 mm size ( IRC and 1 cum 951.00
MORTH )
49 e MAT-00438 -do- 19 mm to 22 mm size ( IRC and 1 cum 1170.00
MORTH )
50 f MAT-00439 -do- 25 mm to 27 mm size ( IRC and 1 cum 1163.00
MORTH )
 S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
51 g MAT-00440 -do- 40 mm to 45 mm size ( IRC and 1 cum 745.00
MORTH )
52 h MAT-00441 -do- 50 mm to 55 mm size ( IRC and 1 cum 555.00
MORTH )
53 i MAT-00442 -do- 60 mm to 63 mm size ( IRC and 1 cum 509.00
MORTH )
54 j MAT-00443 -do- 65 mm size ( IRC and MORTH ) 1 cum 360.95
55 k MAT-00444 -do- 75 mm size ( IRC and MORTH ) 1 cum 289.50
56 1 NOTE:- Add extra Rs. /- per cum for items 1 cum 70 As per WR Dept.
33 (a) to 33 (j) if the metal is obtained by
blasting
57 2 Add 25% extra per cum if the metal is 1 cum 25% As per WR Dept.
obtained by machine crushing excluding cost
of blasting.
58 3 Deduct Rs. /- per cum if the metal or rubble 1 cum 9.90
is obtained from surface stones and boulders

59 4 Add Rs. /- per cum for selection of stones and 1 cum 17.00
boulders from excavated soil dumps for items 33
(a) to 33 (k), when this addition of Rs. /- per
cum allowed deduction of Rs. /- per cum
mentioned under note (3) above should invariably
9.90
be made
HARD BROKEN STONE OTHER THAN
GRANITE SUCH AS QUARTZ, QUARTZ-
NAPA AND BASALT SCREENED AND FREE
FROM DUST
60 33.q MAT-00445 - do - 10 mm size (SS 5) 1 Cum 367.60
61 MAT-00446 -do- 9.5 mm to 11.2 mm size ( IRC and 1 Cum 367.60
MORTH )
62 r MAT-00447 - do - 12 mm size (SS 5) 1 Cum 344.75
63 MAT-00448 -do- 12mm to 14 mm size ( IRC and 1 Cum 344.75
MORTH )
64 S MAT-00449 - do - 20 mm size (SS 5) 1 Cum 279.05
65 MAT-00450 -do- 19 mm to 22 mm size ( IRC and 1 Cum 279.05
MORTH )
66 T MAT-00451 - do - 25 mm size (SS 5) 1 Cum 273.35
67 U MAT-00452 - do - 40 mm size (SS 5) 1 Cum 161.90
68 MAT-00453 -do- 40 mm to 45 mm size ( IRC and 1 Cum 161.90
MORTH )
69 V MAT-00454 - do - 50 mm size (SS 5) 1 Cum 142.85
70 MAT-00455 -do- 50 mm to 55 mm size ( IRC and 1 Cum 142.85
MORTH )
71 33.w MAT-00456 - do - 65 mm size (SS 5) 1 Cum 135.25
72 MAT-00457 -do- 60 mm to 65 mm size ( IRC and 1 Cum 135.25
MORTH )
73 X MAT-00458 - do - 75 mm size (SS 5) 1 Cum 111.45
74 MAT-00459 - do - 75 mm size ( IRC &MORTH) 1 Cum 111.45
 S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
75 Y MAT-00460 - do - 75 to 100 mm size (SS 5) 1 Cum 87.60
76 MAT-00461 - do - 75 to 100 mm ( IRC& MORTH) 1 Cum 87.60
OTHER ITEMS
77 33.z1 MAT-00462 Laterite 40 to 75 mm ( ring) 1 Cum 96.20
78 z2 MAT-00463 kankar, hard broken kankar 40 to 75 mm ( ring ) 1 Cum 71.45
79 z3 MAT-00464 Soling stone of 150 mm size of granite, trap 1 Cum 105.00
and Dolamite varieties.
80 NOTE:- (1) Add extra for items to 33(z3) Rs /- Per cum, 1 Cum 70
wherever quarrying is done by blasting. (2) Wherever
controlled blasting is resorted to the Chief Engineer
concerned shall approve the observed data in support of SS
item No. 22 a to 22 c , 22g, 23
81 z4 MAT-00465 Soling stone of 150 mm size other than 1 Cum 72.40
granite variety
82 z5 MAT-00466 Soling Stone laterite, Kankar 150mm, surface 1 Cum 44.75
stone
83 z6 MAT-00467 Field picked metal unbroken 20 mm size 1 Cum 58.10
84 z7 MAT-00468 - do - 25 mm size 1 Cum 43.80
85 z8 MAT-00469 - do - 40 mm size 1 Cum 50.50
86 z9 MAT-00470 - do - 50 mm size 1 Cum 43.80
87 z10 MAT-00471 - do - 60 mm size 1 Cum 38.10
88 z11 MAT-00472 - do - 80 mm size 1 Cum 33.35
89 NOTE:- Add Rs. /- Per Cum for selection of stone and boulders from 17.00
excavated spoil dumps for items 33 (Q) TO 33 Z , when this addition
of Rs. /- per Cum is allowed, deduction of Rs. /- per Cum should
invariably be made towards the metal or rubble if it is obtained from
surface stone and boulders.
90 34 MAT-05253 Gravel 1 Cum 165.00 As per WR Dept.
(M 008 of Materials
other than covered
under Irrigation
Items )
91 35 a MAT-00473 Quarry rubbish 1 Cum 99.00
92 B MAT-00068 HBG Stone Chips 2.36mm and below 1 Cum 466.00 As per WR Dept.
(Sl.No.67 of
Materials)
93 36.a MAT-00027 Fine aggregate / Sand (un-screened) for 1 Cum As per WR Dept.
Concrete & Filtering items) (excluding (Si. No. 27 of
Materials) and will
Seigniorage charges) be revised as per the
94 b. MAT-00028 Fine aggregate / Sand (unscreened) for 1 cum Govt. new sand
policy
filling (excluding Seigniorage charges)
95 c MAT-00029 Fine aggregate / Sand (screened) for Mortar, 1 Cum As per WR Dept.
Plastering items and Sand blasting items (Si. No. 28 of
Materials) and will
(excluding Seigniorage charges) (Rs. /- is be revised as per the
added towards screening charges) Govt. new sand
policy
 S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
96 37 MAT-00475 Clay for puddle and masonry Items 38 (a) to 1 Cum 38.00
39 (h) As per local prevailing rates based on
competitive quotations.

(C) LIME AND CEMENT

97 40 to As per local
41(c ) prevailing rates
based on
competitive rates
98 42 MAT-00005 Cement excluding cost of empty cement bags 1 MT Monthly rates
4220.00 will be
communicated
by the Govt
NOTE: (1) The rates are exclusive of GST 2) The price of cement will be reviewed
and fixed on monthly basis and rates will be communicated separately.
99 C MAT-00476 Grinding lime mortar or Surkhi mortar 1 Cum 95.25
100 D MAT-00477 Shell lime slaked and screened 1 Cum 940.00
101 E MAT-00478 White cement 1 Kg. 27.95
102 (D) MORTARS
103 43 to Items 43 to 45
45
(E) METAL AND IRON WORKS
104 Mild steel rods 6mm dia. 1 MT
105 Mild steel flats 1 MT Monthly rates
will be
106 Mild Steel, Structural Steel, I.e., Angles, 1 MT
communicated
Channels and I sections. by the Govt
107 High Yield Strength Deformed Bars/TMT 1 MT
bars
108 Mild steel plates 1 MT
NOTE: (1) The rates are exclusive of GST 2) The prices of steel will be
reviewed and fixed on monthly basis and rates will be communicated
separately .
III RATES OF WORKS
(A) CLEARING SITE
109 1.a MAT-00479 Clearing heavy Jungle 1 Sqm 3.20
110 B MAT-00480 Clearing light Jungle 1 Sqm 2.80
111 C MAT-00481 Clearing Scrub Jungle 1 Sqm 2.80
112 D MAT-00482 Clearing Juliflora (Prosafis) jungle including 1 Sqm 4.40
up-rooting and removing of Juliflora stumps.
113 2.a.I MAT-00483 Cutting and removing Palmyrah trees Each 21.00
including stacking of girth 30 to 100 cm.
114 Ii MAT-00484 - do - 100 to 200 cm. Each 48.00
115 2.b.I MAT-00485 Uprooting and removing Palmyrah stumps Each 51.00
including stacking of girth 30 to 100 cm.
116 Ii MAT-00486 - do - 100 to 200 cm. Each 53.00
 S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
117 2.c.I MAT-00487 Cutting and removing date trees including Each 26.00
stacking of girth 30 to 100 cm
118 Ii MAT-00488 - do - 100 to 200 cm Each 39.00
119 d.I MAT-00489 Uprooting and removing stumps of date trees Each 26.00
including stacking of girth 30 to 100 cm.
120 Ii MAT-00490 - do - 100 to 200 cm Each 33.00
121 eI MAT-00491 Cutting and removing other kind of trees Each 33.00
including stacking of girth 30 to 100 cm
122 Ii MAT-00492 - do - 100 to 200 cm Each 51.00
123 iii MAT-00493 - do - above 200 cm Each 83.00
124 f.I MAT-00494 Uprooting and removing stumps of other Each 26.00
kind of trees including stacking of girth 30 to
100 cm.
125 Ii MAT-00495 - do - 100 to 200 cm Each 36.00
126 iii MAT-00496 - do - above 200 cm Each 45.00
127 3.a MAT-00497 Uprooting and clearing prickly pear jungle 1 Sqm 2.50
128 B MAT-00498 - do - under 2.5 meters height including 1 Sqm 3.30
burning and burrying as directed.
129 C MAT-00499 - do - over 2.5 meters height including 1 Sqm 3.90
burning and burrying with an initital lead of
conveyance
130 4.a MAT-00500 Removing of natchu, goobi, thooti etc., from 1 Sqm 2.10
drains, channels including clearance if not
more than 1 metre depth of water with an
initial lead of 10 metresand lift of 2 metres.
131 b.I MAT-00501 Clearing alchi, tilla 1 Sq.m 4.20
132 b.ii MAT-00502 Removal of Jammu 1 Sq.m 3.60
133 c.I MAT-00503 Removal of imponea, cornea 1 Sq.m 4.00
134 c.ii MAT-00504 Removal of water hyacinth upto 30 cm thick. 1 Sqm 4.10
135 c.iii MAT-00505 - do - more than 30 cm thick 1 Sq.m 5.50
136 D MAT-00506 Removal of natchu, goobi, thooti etc., for 1 Sqm 1.50
every extra lead or lift over the initial lead or
lift.
(B) DISMANTLING
5 DISMANTLING, CLEARING AWAY
MATERIALS USEFUL FOR REUSE.
137 a.(i) MAT-00507 Dry rough stone revetment for aprons and 1 cum 65.60
stacking within 40 metres
7 Drilling holes in hard granite or sheet rock
a) Manually ( Hand)
138 I) MAT-00508 20 mm dia meter 1 RM 136.00
139 ii) MAT-00509 25 mm dia meter 1 RM 144.00
140 iii) MAT-00510 36 mm dia meter 1 RM 166.00
141 b) Pneumatic Compressor
142 I) MAT-00511 20 mm dia meter 1 RM 154.00
143 ii) MAT-00512 25 mm dia meter 1 RM 167.00
 S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
144 iii) MAT-00513 36 mm dia meter 1 RM 182.00
8 Grouting the holes with neat cement slurry
excluding cost of steel
145 I) MAT-00514 20 mm dia meter 1 RM 97.00
146 ii) MAT-00515 25 mm dia meter 1 RM 122.00
147 iii) MAT-00516 36 mm dia meter 1 RM 152.00
White Washing and Painting works
148 AI MAT-00517 White washing and colour banding for guard each 11.00
and guide stones including cost of materials

149 B1 MAT-00518 Screening sand and gravel 1 cum 10.50

150 B2 MAT-00519 Screening chips and metal 1 cum 17.60
151 C1 MAT-00520 Removing and refixing Hectometre or each 12.65
Demarcation stones
(S ) ROAD WORK ITEMS
PICKING OLD METALLED SURFACE
TO DEPTH OF 40 TO 100 mm
SPREADING OLD METAL AND NEW
METAL SECTIONING INCLUDING
EDGEBUNDS AND SUBGRADE
ROLLING, SPREADING METAL
INCLUDING BLINDAGE OFGRAVEL
WATERING WITH AN INITIAL LEAD
OF 2 HECTOMETERS AND HAND
ROLLER ( 1.5 TO 2 TONNES)
ROLLING ETC., INCLUDING
BARRICADING, DIVERSION OF
TRAFFIC AND WETTING THE NEW
CONSOLIDATION FOR A FORTNIGHT
COMPLETE
( For a compact thickness )
1 (I ) HARD METAL
152 A MAT-00521 40 mm thickness 10 70.00
sqm
153 B MAT-00522 50 mm thickness 10 74.00
sqm
154 C MAT-00523 75 mm thickness 10 80.30
sqm
155 D MAT-00524 100 mm thickness 10 87.00
sqm
156 1 (ii ) (For compact thickness of soft metal)
157 A MAT-00525 50 mm thickness 10 53.80
sqm
158 B MAT-00526 75 mm thickness 10 63.90
sqm
 S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
159 C MAT-00527 100 mm thickness 10 70.10
sqm
5 Picking old metalled surface to a depth of 40 to 100 mm
and spreading metal including watering with an initial
lead of 2 Hectometers and rolling with power rollers
watering and spreading gravel for blindage and power
roller rolling including hire charges of power roller( 8 to
10 T ) barricading and diversion of traffic and wetting
the new consolidation for a fortnight(for compacted
thickness of )
HARD METAL
160 5 (a) MAT-00528 40 mm thick ness 10 185.00
sqm
161 (b) MAT-00529 50 mm thick ness 10 210.00
sqm
162 (c ) MAT-00530 75 mm thick ness 10 231.00
sqm
163 (d ) MAT-00531 100 mm thick ness 10 248.80
sqm
164 (e) MAT-00532 150 mm thick excluding hire charges 10 445.40
sqm
165 MAT-05455 Gelatin(For MORTH data, for works of state Per Kg 71.00 As per WR Dept.
& national high ways only) (M 104 of Materials
other than covered
under Irrigation
Items)
166 MAT-00021 Electric Detonators(For MORTH data, for each 12.00 As per WR Dept.
works of state & national high ways only) (Si. No. 21 of
Materials of WR
Dept.)
167 MAT-00273 Hot applied thermoplastic compound(For Per Rate as per local As per WR Dept.
MORTH data, for works of state & national Litre competitive (M 118 of Materials
other than covered
high ways only) quotations under Irrigation
Items)
168 Reflectionising glass beads of 2 mm Per Kg Deleted
thick(For MORTH data, for works of state &
national high ways only)
169 MAT-00533 Road marking paint confirming to IS 164(For Per Kg 152.15
MORTH data, for works of state & national
high ways only)
170 n Labour charges for laying filters with coarse 1 cum 55.30
aggregate.
171 o Labour charges for laying filter with sand. 1 cum 30.70
172 Fly Ash 1 cum Deleted
173 MAT-00003 Binding Wire 1 Kg 64.00 As per WR Dept.
(M 072 of Materials
other than covered
under Irrigation
Items)
 S o Rate
S.S.
Si. CFMS Unit for 2024-25
Item Description
No Code (per) in Rs. Remarks
No.
1 2 3 4 5 6 7
174 MAT-00536 Jute rope Mtr 8.35
175 MAT-00537 De bonding strips Mtr 8.55
176 MAT-00538 Sealent Ltr 53.95
177 MAT-00539 Poly sheet 125 microns 1 sqm 15.25
178 MAT-00540 Rural water rate 1 kl 105.00 As per WR Dept.
(M 189-b of
Materials other than
covered under
Irrigation Items)
179 Selected Earth for Embankment & shoulders Cum 144.00 As per WR Dept.
for Road & Bridge works as per MoRTH (M - 092 of
Materials other than
Spec. No. 305 (5th Revision) obtained from covered under WR
Private Land work Items)
HIRE CHARGES OF PLANT AND
MACHINERY
 HIRE CHARGES OF PLANT& MACHNIERY FOR
ROAD & BRIDGE WORKS FOR THE YEAR 2022-23
S o Rate for Remarks
Sl. Description 2024-25
Unit
No. CFMS Code
Machine Activity
1 2 3 4 5 7 8
1 HIR-00008 Dozer( D 80 ) Spreading Per Hour As per WR
Cutting Dept. (S.No.8)
Cleaning
HIR-00072 Spreading 1926.00
2 Dozer (D50) Cutting Per hour
Cleaning
3 HIR-00073 Mortor Grader Clearing 3834.00
Spreading
Per Hour
GSB
WMM
4 HIR-00052 Hydraulic Soil Ordinary As per WR
Excavator Soil Marshy Per Hour Dept.
Soil unsuitable (S.No.52)
5 HIR-00074 Front end loader Soil loading Per Hour 2043.00
Aggregate loading Per Hour
6 HIR-00054 Tipper- 5.5 Cum Transportation of Per Hour As per WR
soil, GSB,WMM, Dept.
Hot mix etc (S.No.54)
Per T-Km 8.60
7 HIR--00062 Vibratory roller 8 Earth/Soil, GSB, Per Hour As per WR
tonne WMM Dept.
(S.No.62)
8 HIR-00075 Smooth wheeled Soil compaction Per Hour As per WR
roller 8 tonne ,BM compaction dept.
(S.No.50)
9 HIR-00064 Water tanker 8 Water transport Per Hour As per WR
Kilolitre Dept.
(S.No.64)
10 HIR-00076 Water tanker 6 Water transport Per Hour 822.00
Kilolitre
11 HIR-00077 Tractor Pulling Per Hour 536.00
12 HIR-00078 Tractor with GSB mixing @ Per Hour 548.00
rotavator site
13 HIR-00079 Tractor with Scarifying Per Hour 548.00
ripper attachment
14 HIR-00002 Air Compressor 5 General purpose Per Hour As per WR
cmm(electric) Dept. (S.No.2)
15 HIR-00080 Wet mix plant 60 Wet mix Per Hour 2004.00
TPH
16 HIR-00081 Mechanical Surface cleaning Per Hour 460.00
broom Hydraulic
17 HIR-00082 Bitumen Pressure Applying bitumen Per Hour 1907.00
Distributor tack coat
18 HIR-00083 Emulsion Applying emulsion Per Hour 1084.00
Pressure tack coat
Distributor
19 HIR-00084 Hot mix Plant – DBM/BM/SDC Per Hour 36255.00
120 TPH capacity /Premix
20 HIR-00085 Hot mix Plant – DBM/BM/SDC Per Hour 31115.00
100 TPH capacity /Premix
 S o Rate for Remarks
Sl. Description 2024-25
Unit
No. CFMS Code
Machine Activity
1 2 3 4 5 7 8
21 HIR-00086 Hot mix Plant – DBM/BM/SDC Per Hour 27900.00
60 TPH capacity /Premix
22 HIR-00087 Hot mix Plant – DBM/BM/SDC Per Hour 24685.00
40 to 60 TPH /Premix
capacity
23 HIR-00088 Paver Finisher DBM/BM/SDC Per Hour 3891.00
Hydrostatic with /Premix
sensor control
100 TPH
24 HIR-00089 Paver finisher Paving of WMM, Per Hour 2861.00
Mechanical 100 paving of DLC
25 HIR-00090 Hydraulic Chip Surface dressing Per Hour 3264.00
Spreader
26 HIR-00091 Tandem Road Rolling of Per Hour 2208.00
roller Asphaltic surface
27 HIR-00092 Pneumatic Road Rolling of Per Hour 1803.00
roller Asphaltic surface
28 HIR-00093 Pot-Hole repair Repair of pot-holes Per Hour 1085.00
machine
29 HIR-00094 Bitumen boiler Bitumen Spraying Per Hour 264.00
oil fired
30 HIR-00095 GSB Plant 50 Producing GSB Per Hour 1469.00
Cum
31 HIR-00096 Mastic Cooker Mastic wearing Per Hour 91.00
coat
32 HIR-00097 Batching and Concrete mixing Per Hour 1561.00
Mixing Plant (a)
30 Cum capacity
HIR-00010 (b) 15 - 20 Cum Concrete mixing Per Hour As per WR
capacity Dept.
(S.No.10)
33 HIR-00001 Transit mixer Transportation of Per Hour As per WR
concrete mix Dept. (S.No.1)
34 HIR-00071 Concrete pump of Pumping of Per Hour As per WR
45 and 30 cum Concrete Dept.
(S.No.70)
35 Cranes
HIR-00098 (a) 80 tonnes Lifting purpose Per Hour 1570.00
HIR-00099 (b) 35 tonnes 1054.00
HIR-00100 (c) 3 tonnes 511.00
HIR-00101 (d)Crane with Well foundation Per Hour 2747.00
grab bucket 0.75
cum
HIR-00102 (e)Crane with Well foundation Per Hour 4491.00
grab bucket 1 cum
36 HIR-00014 Concrete bucket For pouring Per Hour As per WR
1.50 cum concrete Dept.
(S.No.14)
37 HIR-00103 Kerb casting Kerb making Per Hour 617.00
machine
38 Concrete mixer Concrete mixing Per Hour As per WR
 S o Rate for Remarks
Sl. Description 2024-25
Unit
No. CFMS Code
Machine Activity
1 2 3 4 5 7 8
HIR-00018 (a)0.28 cum Dept.
(S.No.18)
HIR-00104 (b) 1.0 cum Concrete mixing Per Hour 859.00
39 HIR-00105 Piling rig with 0.75 m dia to 1.20 Per Hour 7293.00
bantonite pump m dia boring
attachment
40 HIR-00106 Concrete paver Paving of concrete Per Hour 3863.00
finisher with 40 surface
HP motor
41 HIR-00107 Integrated stone Crushing of spalls Per Hour 11603.00
crusher 100 TPH
HIR-00108 Crushing of spalls Per Hour 24465.00
200 TPH
42 HIR-00109 Pre stressing jack Stressing of steel Per Hour 189.00
with pump and wires/ stands
access
43 Generator
HIR-00110 250 KVA Generation of per hour 2572.00
HIR-00111 125 KVA electric energy per hour 1836.00
HIR-00112 100 KVA per hour 1567.00
HIR-00023 As per WR
30 KVA per hour Dept.
(S.No.23)
44 HIR-00113 Pneumatic Pneumatic sinking Per K.m. 6781.00
sinking of Plants of wells
HIR-00058 As per WR
Truck 5.5 cum
45 Material transport Per her Dept.
per 10 tonnes (S.No.58)
46 HIR-00114 Road marking Road marking Per Hour 161.00
Machine
47 HIR-00114 Mobile slurry Mixing and laying Per Hour 1500.00
seal equipment slurry seal
48 HIR-00115 Plate compacter For compacting in Per Hour 70.00
medians

49 HIR-00022 Drilling For drilling Per Hour As per WR

equipment Dept.
(S.No.22)
Note: The above hire charges of Machinery & Plant includes crew, oils,
conveyance of Machinery to site and all other incidental charges

-Sd-
Engineer-in-Chief(R&B),
Admn.,& NDB
 SoR – 2024-25

Part – IV
PUBLIC HEALTH ITEMS

1
 PUBLIC HEALTH ITEMS
Sl. Description Unit SoR for
No. 2024-25
1 2 3 4
1 RATES OF LABOUR
(SKILLED WORKMEN)

1. Caulker Per Day

2. Plumber 1st Class Per Day
3. Plumber 2nd Class Per Day
4. Sewer Cleaner Per Day
5. Well Sinker Per Day As per Lab
6. Pipe line Fitter 1st Class Per Day or rates of SoR
7. Pipe line Fitter 2nd Class Per Day
8. Pump Operator Per Day
9. Bore Mechanic Per Day
10. Light Vehicle Driver Per Day
Note: The rate at relevant item in
common SoR is applicable for
occasional employment.
2 RATES FOR EARTH WORK :
a. Earth work excavation in all
types soils for pipe lines, for
drainage and water supply,
where the depth is more than 1.5
times the width.
b. Earth work excavation in all
types soils for pipe lines, for To follow the relevant items of
drainage and water supply, Irrigation work items as per AP.
where the depth is less than 1.5 Standard data
times the width.
c. Earth work excavation in all
types soils for open trenches, for
valve pits, inspection chambers,
etc.
3. Excavation of pipe line trenches
a. for drainage and water supply in
rock requiring blasting with
initial lead and lift including cost
of blasting materials where the
depth is more than 1.5 times the
width, in places where there is
no habitation.

2
b. Excavation of pipe line trenches
for drainage and water supply in
rock requiring blasting with
initial lead and lift including cost
of blasting materials where the
depth is less than 1.5 times the
width, in places where there is
no habitation.
c. Cutting rock for pipe line
trenches by hammers, knuckles
and chisels including stacking
where the depth is 1.5 times or
more than the width.
d. Cutting rock for pipe line
trenches by hammers, knuckles
and chisels including stacking
where the depth is less than 1.5
times the width.
e. Cutting rock for works other
than pipe lines trenches by
hammers, knuckles and chisels
including stacking.
f. For controlled blasting at
restricted places
NOTE: - Rock should be
measured in solids. In case it is
not possible, stacks should be
made in which case 40% for
voids to be deducted from the
stack measurements.
4 Loading or unloading materials
such as C.I. Pipes, PVC Pipes,
AC Pressure Pipes, DI Pipes,
SW Pipes, PVC Pipes,
A.C/Specials less than 300 mm
dia. Up to 4 m in length
including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne To follow as per AP. Standard
b. A.C. Pipes & Specials Per Tonne data
c. Stoneware pipes & Specials Per Tonne
d. P.V.C. Pipes and fittings Per Tonne
5 Loading or unloading materials
such as C.I. Pipes, DI pipes, SW
pipes, AC pressure pipes &
fittings/ specials from 300 mm
to 600 mm dia. Up to 4 m in
length including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne To follow as per AP. Standard

3
b. A.C. Pipes & Specials Per Tonne data
c. Stoneware pipes & Specials Per Tonne
6 Loading or unloading materials
such as C.I. Pipes, DI pipes,
PVC pipes, AC pipes less than
300 mm dia., above 4 m in
length including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne To follow as per AP. Standard
b. A.C. Pipes & Specials Per Tonne data
c. P.V.C. Pipes and fittings Per Tonne
7 Loading or unloading materials To follow as per AP. Standard
such as C.I. Pipes, DI pipes, AC data
pipes from 300 mm to 600 mm
above 4 m in length including
stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne
b. A.C. Pipes & Specials Per Tonne
Note:- For loading and
unloading the above materials at
Railway Stations, the rates may
be adopted based on the
competitive quotations or the
hummable charges if prevailing.
8. Lowering C.I. / D.I. Pipes (all To follow as per AP. Standard
a. classes) and specials (fittings) data
with s/s ends carefully into
trenches and laying them true to
alignment and gradient including
all sundries but excluding cost
and conveyance of pipes from
source of supply (Ref to
specifications.
BIS No.3114/1994)
Diameter of Pipe/Fittings in mm
:
80mm to 1000mm dia. Per Meter

4
 PUBLIC HEALTH ITEMS
Sl. Description Unit Code SoR rates for
No. 2024-25

1 2 3 4 5
8.b Lowering C.I. / D.I. Pipes (all
classes) and specials (fittings)
with flanged ends carefully into
trench and laying them true to
alignment and gradient including
all sundries but excluding cost
and conveyance of pipes from
source of supply. (Reference to
specifications. BIS
No.3114/1994)
DIAMETER OF PIPE/Fittings To follow as
in mm : per AP. Standard
80mm to 750mm dia. data
800 Per Meter LAB-00587 787
900 Per Meter LAB-00588 1022
1000 Per Meter LAB-00589 1329
1100 Per Meter LAB-00590 1636
1200 Per Meter LAB-00591 1945
9.a Jointing CI /DI pipes & fittings
with s/s ends including cost of
pig lead, Spun yarn and sundries
such as cost of fuel for melting
lead, filling with water with lead
up to 500m and testing to
required pressure complete.
(Reference to specifications. BIS
No.3114/94/12288:1997)
DIAMETER OF PIPE/Fittings To follow as
in mm : per AP. Standard
80mm to 800mm data
900 Each Joint LAB-00592 20550
1000 Each Joint LAB-00593 22959
1100 Each Joint LAB-00594 25364
1200 Each Joint LAB-00595 27771
9.b Jointing C.I., D.I. pipes and
fittings with rubber gasket
(push-on-joint),excluding the
cost of the gasket but including
all sundries filling with water,
with a water lead up to 500m
and testing to required pressure,
etc. complete
(Reference to specifications IS

5
 3114/1994/12888/1997)

Diameter of Pipe/Fittings in mm To follow as per

: AP. Standard data
80mm to 1000mm dia. Each Joint
10 Jointing CI pipes, fittings and
valves with flanged ends
including cost of jointing
materials such as bolts, rubber
insertion, white lead including
filling with water, with lead up
to 500 meters and testing to
required pressure complete.
(Reference to specifications. BIS
No.3114/1994.)
DIAMETER OF PIPE/Fittings/
valve in mm :
80mm to 750mm dia. Each Joint To follow as per AP. Standard
data
800 Each Joint LAB-00596 8698
900 Each Joint LAB-00597 10229
1000 Each Joint LAB-00598 11780
1100 Each Joint LAB-00599 13368
1200 Each Joint LAB-00600 15015
11a Lowering the RCC plain ended
pipes carefully into the trench
laying them true to alignment
and gradient, jointing RCC pipes
with cement joints including
curing, the cost of jointing
materials i.e., Cement Mortar
(1:1.5), hemp yarn etc., and
testing including filling with
water with a water lead up to
500 Meters excluding cost of
rubber rings as per BIS
No.783/85.
per every 25 mm dia. Per Meter LAB-00601 30
11b Lowering the RCC S/S pipes
carefully into the readymade
trenches laying them true to
alignment and gradient, jointing
with rubber rings and testing
including filling with water with
a water lead up to 500 meters

6
 including cost of rubber rings as
per BIS No. 783/1985

per every 25 mm dia. Per Meter

80mm to 600mm To follow as per AP. Standard
data
700 LAB-00602 475
800 LAB-00603 571
900 LAB-00604 684
1000 LAB-00605 820

12 Lowering and Jointing G.I. pipes

and specials / fittings including
excavation of trench of 0.5m
width and 0.50 m depth in all
soils except rock requiring
blasting and refilling trenches
after laying and jointing pipes
and also including cost of
jointing materials but excluding
the cost of pipes. Reference to
specifications. BIS No.783/85
a G.I. Pipes :Dia. in mm To follow as per AP. Standard
data
15mm to 150mm Per Meter
12- Laying, jointing of PVC/HDPE
b pipes as per BIS No.7634 part-
III/75 for PVC and BIS No.7634
part-II/75 for HDPE pipes
including trench excavation and
refilling.
DIA in mm
50 Per Meter LAB-00606 49
40 Per Meter LAB-00607 49
32 Per Meter LAB-00608 49
25 Per Meter LAB-00609 44
20 Per Meter LAB-00610 41
NOTE: - (i) The above rates are
applicable for the works in
District only.
(ii) If the depth of excavation is
more than 0.5 m separate rates to
be worked out.
13 Lowering and laying in
readymade trench true to
alignment and gradient, jointing,

7
 and testing of Stone ware pipes
including cost of jointing
material such as cement mortar
(1:1) proportion and hemp yarn
but excluding cost and
conveyance of pipe. (Reference
to specifications BIS No.
6530/72)
Dia. of Pipes in mm To follow as per AP.
100mm to 450mm Per Meter Standard data

14 Lowering, Laying, Jointing and

Testing to hydraulic test
pressure including cost of water
with minimum water lead of
500m for UPVC pressure pipes
in readymade trenches to
alignment and gradient including
all sundries but excluding cost &
conveyance of pipes from source
of supply and jointing material
as per BIS No: 7634 part-III-
1975.
Dia. Of pipe Per Meter To follow as per AP.
63 to 315mm Standard data
15 Laying and jointing of HDPE
pipes by butt fusion welding as
per IS: 7634 – part-II/1975 as
amended from time to time to
the alignment and gradient and
testing the pipeline to the
required pressure.
Outer Dia. of pipes in MM
63 to 355 mm dia. To follow as per AP.
Standard data

400 LAB-00611 338

450 LAB-00612 375
16 Lowering, keeping in position
and fixing D.I. sluice valves
(with cap / with hand wheel &
Reflex valves) excluding cost of
bolts, nuts, rubber insertion,
sluice valve and tail pieces
Dia. of Valve in mm. To follow as per AP.
80mm to 600mm Each Standard data

8
17 Labor charges for fixing Air
valves including boring the
mains and threading the bore
fixing nipple etc., complete.
Dia. of Air valve in mm.
25 Each To follow as per A.P. Standard
40 Each data
50 Each LAB-00613 244
65 Each LAB-00614 258
80 Each LAB-00615 280
100 Each LAB-00616 331
125 Each LAB-00617 517
150 Each LAB-00618 566
18 Labor charges for fixing Kinetic
Air Valves with isolating Sluice
valves, Double Air valves/ Air
Cushion valve excluding cost of
jointing materials such as bolts,
nuts and rubber insertions etc.,
complete.
Dia. of Air valve in mm.
25 Each LAB-00619 234
40 Each LAB-00620 264
50(Double Air valves) Each LAB-00621 281
65 Each LAB-00622 301
80 Each LAB-00623 329
100 Each LAB-00624 383
125 Each LAB-00625 600
150 Each LAB-00626 656
19 Uprooting C.I. / DI Pipes by
melting the lead, loosening the
joints, scraping the pipes,
hoisting and keeping within a
lead of 10 m but excluding earth
work excavation and refilling.
80mm to 600mm Per Meter To follow as per AP.
Standard data
20 Uprooting of RCC pipes
including breaking the collars,
loosening the joint, separating
the pipes, hoisting and keeping
within a lead of 10 m but
excluding earthwork excavation
and refilling.
100mm to 300mm Per Meter To follow as per AP.
Standard data

9
21 Removing old G.I. pipes and
specials / fittings and cleaning,
scraping the pipes, hoisting and
keeping within 50m lead but
excluding earth work excavation
of trenches and refilling.
Dia. of Pipes in mm
15mm to 50mm Per Meter To follow as per AP.
Standard data

22 Cutting C.I./ DI Pipes without

water in mains Dia. of pipes in
mm.
Dia. of Pipes in mm
80mm to 600mm Each cut To follow as per AP. Standard
data
680 Each cut LAB-00627 730
700 Each cut LAB-00628 749
750 Each cut LAB-00629 809
800 Each cut LAB-00630 860
900 Each cut LAB-00631 965
1000 Each cut LAB-00632 1073
1100 Each cut LAB-00633 1182
1200 Each cut LAB-00634 1290
23 Cutting A.C. Pipes without
water in mains Dia. of pipes in
mm.
Dia. of Pipes in mm
80 Each cut LAB-00635 47
100 Each cut LAB-00636 47
125 Each cut LAB-00637 47
150 Each cut LAB-00638 47
200 Each cut LAB-00639 49
250 Each cut LAB-00640 81
300 Each cut LAB-00641 81
350 Each cut LAB-00642 100
400 Each cut LAB-00643 110
450 Each cut LAB-00644 136
500 Each cut LAB-00645 152
600 Each cut LAB-00646 168
24 Drilling and tapping CI/ DI / GI
Main and fixing brass screw
down ferrule and plug.
10 mm to 20mm Each Tapping To follow as per AP.
25 mm to 40mm Each Tapping Standard data

10
25 Cutting road surface including
stacking of excavated materials
for pipe line trench work.
a) Cutting open B.T. road 10 Sqm LAB-00647 1081
surface (as well as asphalt
concrete up to 75 mm thick)
including water bound macadam
b) Cutting open C.C. road 1 Cum LAB-00648 3502
surface with concrete saw cutter
and removal with Breaker
c) Cutting open water bound 1 Cum LAB-00649 339
macadam road including soiling
26 Bailing out water.(For PH
item)
a) Bailing out water from the HP/Hour LAB-00650 To adopt the
pipe line trenches with oil rate arrived for
engine driven pump sets, 5HP capacity
including hire charges, fuel pump based on
charges and wages for Driver the WR
and Helper up to 5HP capacity department
pumps. data.

b) Bailing out water from the HP/Hour LAB-00651 To adopt the

pipe line trenches with Electric rate arrived for
Driven pump set including hire 5HP capacity
charges, current charges and pump based on
wages for Driver and Helper up the WR
to 5HP capacity pumps. department
data.

c) For capacity of Pumps more

than 5HP
A. Water lifting charges using
Electrical driven pump
i. per HP hr rate(including Per HP hr LAB-00652 Rs.12.94/-
contractors profit and overhead
charges of 13.615%
ii. Other expenses in terms of Per hr LAB-00653 Rs.208.56/-
Mazdoor, pump operator and
pipe laying and
dismantling(including
contractors profit and overhead
charges of 13.615%) per hr
Total hire charges of Electrically Per hr = (12.94xhp capacity)+208.56
driven dewatering pump per
hour
B. Water lifting charges using
Diesel driven pump
i. per hphr rate(including Per hphr LAB-00655 Rs.33.26/-

11
 contractors profit and overhead
charges of 13.615%
ii. Other expenses in terms of Per hr LAB-00656 Rs.254.34/-
Mazdoor, pump operator and
pipe laying and
dismantling(including
contractors profit and overhead
charges of 13.615%) per hr
Total hire charges of Diesel Per hr = (33.26xhp capacity)+254.34
driven dewatering pump per
hour
NOTE:- The rate is payable on the total H.P. hours ignoring fractions less than 0.5 HP
hour and rounding off 0.5 HP hour or more to the next higher integer.
27 Shoring and strutting of trenches
for water and sewer main
a) Single Staging from (0 to 2.5 1 Sqm of To follow as per AP.
Mts.) Shoring area Standard data
b) Double staging from (2.5 m to 1 Sqm of
4.5 Mts.) Shoring area
28 Barricading, hoarding, lighting 1 RMT To follow as per AP. Standard
and watching etc., for water data
supply and sewerage works for
trenches.
29 Excavation of trenches for
infiltration galleries, siphon lines
and connecting mains in all soils
under water including all leads,
lifts, shoring, strutting, bailing
out water and removal of
shoring and strutting materials,
after completion of pipe line
work.
a) 0 to 1 m deep under water. 10 Cum LAB-00658 17372
b) 1 to 2 m deep under water. 10 Cum LAB-00659 24886
c) 2 to 5 m deep under water. 10 Cum LAB-00660 37351
d) Beyond 5 m deep under water 10 Cum LAB-00661 7136
for every additional 1 m depth
over item 'c'
NOTE:- The above rates do not
include rock requiring blasting
or chiseling
30 Laying and jointing perforated Per Meter LAB-00662 52
RCC pipes inclusive of bailing
out water and jointing with
cement fillets and all other
incidental charges for infiltration
gallery inclusive of bailing out
water by pumping to keep the

12
 trench reasonably dry to
facilitate the work excluding
cost of perforated pipes and
collars.

Per every 25 mm dia.

31 Centering and scaffolding
charges for RCC members
including all materials and labor
charges for forming and
dismantling.
a) for RCC Elevated Service One Sqm of
Reservoir of staging up to 15 Centering area
Meter below L W L.
1) Slabs for thickness (150 mm LAB-00663 4725
to 300 mm)
2) Slabs for thickness above 300 LAB-00664 Extra for every
mm 50mm
thickness
increase
Rs.473/-
3) Side walls curved surfaces. LAB-00665 3536
(rate is for both sides centering)
4) Side wall straight surfaces. LAB-00666 3181
(rate is for both sides centering)
5) Dome. LAB-00667 3876
6) Roof Slab. LAB-00668 2168
7) Column braces and beams LAB-00669 1596
8) Circular braces, ring beams & LAB-00670 1752
circular column.
Note: - For RCC ELSR of
staging above 15 m, the %
increase in these rates shall be as
follows.
15-18 m ---- 9%
18-21m --- 15%
21-24 m --- 21%
24 m -27m --27%
above27m --- 30%
Note: The Centering charges for item No’s.3 & 4 are for both the faces of the
respective numbers. The measurement of centering charges shall be in “Sqm” for
one face only and the centering charges given are for two faces of centering.

b) For Ground level works :-

1) Slabs 1 Sqm To follow as per AP.
2) Beams & Lintels 1 Cum Standard data
3) Sun shades 1 Sqm

13
 4-a) RCC vertical walls of plane 1 Sqm of LAB-00671 500/Sqm
surface including open drains of centering area
600mm size and above. for one surface
4-b) VCC vertical walls of plane 1 Sqm of LAB-00672 490/ Sqm
surface including open drains of centering area
600mm size and above. for one surface
5) RCC vertical walls of curved 1 Sqm of LAB-00673 635/ Sqm
faces centering area
for one surface
32 Lift or delift of materials :
a) Lifting of cement concrete for 1 Cum
RCC elevated reservoir. For 208
every 1m height or part thereof LAB-00674
over the initial lift of 3 m
b) Delifting the materials such as 1 Cum
stones, concrete etc., for
concrete below ground level for
construction of masonry ground
level reservoirs, construction of
ground level reservoirs, LAB-00675 63
inspection wells, test wells and
sump wells etc., for every 1 m
depth or part there of beyond the
initial depth of 3 meters from
ground level.
39 Extra allowance for isolated Each 30% extra over
(a) scattered works viz., valve pits / the cost of
chambers, public fountains, chamber.
meter pits and manholes,
delivery cistern etc., complete.
(b) Repairs to the existing mains, 100% extra over
interconnections, replacement of the cost of work
valves/specials etc., including
the cutting, jointing, bailing out
of water, drying, earth work
excavation etc., complete.
40 Removal of wet silt and sludge 10 Cum LAB-00676 3531
by manual means from sullage
drains with aid of baskets and
vessels.
41 Well sinking in sandy and other
loose soils under water either by
manual labor, divers, or
dredgers, weighting the top of
staining to assist sinking etc.,
including dewatering and other
incidental charges such as hire
charges for mechanical
equipment etc.,

14
 Up to 2 m below GL/m Per meter To adopt as per Standard data
From 2 to 4 m below GL/m Per meter
From 4 to 6 m below GL/m Per meter
From 6 to 8 m below GL/m Per meter
From 8 to 10 m below GL/m Per meter
42 Sinking in Hard strata other than Observed Data
rock but in soils like limestone,
gravel, clay under water
including, pumping dewatering,
hire charges for mechanical
equipment etc., complete.
43 Rates for OHSRs/ELSRs
including fixtures with a staging
of 15 m, without Seismic
analysis.
a 500 Kilo liters Per liter LAB-00677 24.11
b 1000 Kilo liters Per liter LAB-00678 20.03
c 1500 Kilo liters Per liter LAB-00679 18.05
d 2000 Kilo liters Per liter LAB-00680 15.71
e 2500 Kilo liters Per liter LAB-00681 14.73
1) The above rates are arrived with base rate of Cement Rs.4220/- per MT (as per
G.o.Rt.No.2029 Water Resources (Reforms) Dept. Dt:06-10-2022) & Steel Rs 60000/-
per MT(Fe 500) (BoCE rates for the month of March-2024).
2) All concrete components shall be designed with M30 Design Mix proportion.
3) For intermediate capacities proportional rates shall be adopted.
4) The foundations shall be designed for Annular Raft Footings.
The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for
SBC of 15 T/Sqm.
a) For every decrease of 2.50 T/Sqm of SBC, the rate shall be increased by 2.50% on
basic rate.
b) For every increase of 2.5 T/Sqm of SBC, the rate shall be decreased by 1.0% on
basic rate up to 20 T/Sqm
c) For SBC 10T/Sqm to 7.5 T/Sqm, solid raft shall be provided and for solid raft the
rate shall be increased by 10% on basic rate.
d) For SBC 7.5 T/Sqm to 5 T/Sqm, solid raft shall be provided and for solid raft the
rate shall be increased by 15% on basic rate.
e) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which
additional payment shall be made as per field condition.
5) For staging less than 15 m, the rate shall be decreased by Rs.0.05 paisa on basic rate
per liter per every Meter decrease in staging.
6) For staging above 15 m, the rate shall be increased by Rs.0.10 paisa on basic rate per
liter per every Meter additional staging.
7) The above rates shall be increased / decreased due to increase/decrease in the cost of
cement by Basic rate x {(Rc-4220)/4220} x 0.07
Rc = Rate of Cement (Rs per MT) at the time of preparation of estimate.

15
8) The above rates shall be increased / decreased due to increase/decrease in the cost of
Steel by Basic rate x {(Rs-60000)/60000} x0.2
Rs = Rate of Steel (Rs per MT) at the time of preparation of estimate.
9) a) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner
surface of the Reservoir including roof.
b)The rate inclusive of 2 coats of weather proof emulsion painting for external
surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material,
Valve chambers etc., for pipe connections including cost of pipes, specials and valves
as per departmental designs and drawings.
10) For tribal/Agency / Rural area, the above rates as arrived up to shall be increased
by 10%.
11) The above rates adopted for a wind pressure up to "250 kg/Sqm". For every 100
kg/Sqm decrease in wind pressure, the rate shall be decreased by 5%
12)
a) The Basic rate is adopted by considering the design for Seismic forces for Zone- II
only of seismic zones.
(b) The basic rates shall be increased by 15 % for Zone-III of seismic zones.
13-(a). The ELSR/OHSR shall be designed with minimum of two rows of columns for
capacities above 500 KL & up to 1000KL.

13-(b). The ELSR/OHSR shall be designed with minimum of three rows of columns
for capacities above 1000KL.
14. The shaft type staging with slip form can also be provided with proper approval
from competent authority without any additional cost.
15) The basic rate is inclusive of following Fixtures
i) Pipe connections & Specials with D.I materials
(a) All pipe connections for Inlet, Out let, Over Flow, Scour pipes shall be provided
with D/F DI material.
(b) The Valves for above pipe connections also shall be of DI material of PN 16 duty
confirming to the specification of SoR item No.28
(c) All specials such as Bends, Tees, Reducers, Duck foot Bends, Bell mouths etc,.
Shall be of DI material.
II) The sizes of the verticals for ELSR/OHSR shall be:
a) For 500 KL to 750 Kl ELSRs
Inlet Pipe - 300mm dia.
Out let Pipe - 350mm dia.
DI valves – 2 No’s
Over Flow pipe - 350m dia.
Scour Pipe - 200mm dia.
b) For 800 KL to 1500 Kl ELSRs
Inlet Pipe - 400mm dia.
Out let Pipe - 450mm dia.
DI valves – 2 No’s
Over Flow pipe - 450m dia.
Scour Pipe - 200mm dia.
c) For above 1500 KL to 2500 Kl ELSRs

16
 Inlet Pipe - 400mm dia.
Out let Pipe - 500mm dia.
DI valves – 2 No’s
Over Flow pipe - 500m dia.
Scour Pipe - 200mm dia.
Note: Any deviation from the above sizes as per design, shall be paid or recovered.
(iii) Manhole Frames & Covers
a) All man hole Frames & Covers shall be made of CI/DI materials with min. size of
0.60mX 0.60m - For Roof & Valve Chambers.
iv) CI/D.I Double Swan neck ventilators (min. of 150mm dia.) shall be provided in top
dome and slab with mosquito/fly proof nets - 4Nos.
v) RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.
vi) RCC precast ladders of 0.60 m width - 2 Nos.
vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C
hand railing of 1.0 m height – 1 No
viii) The staircase shall be enclosed with brick masonry walls on three sides and
collapsible MS gate on front side up to 1st brace level, to prevent unauthorized entry.
ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover
slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement. The
Mix shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm
thick top slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.
x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using
Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of
40mm dia. pipe & middle railing of 25mm dia. and verticals with 40mm dia. at an
interval not more than of 1.00m c/c.
xi) Water Level Indicator of reputed make – Digital type (1 No) and Conventional
type (1 No)
xii) Lightening Arrestor with all its accessories complete including earthing, with
relevant IS Codes - 1 No.
xiii) Compound wall: Construction of compound wall including ornamental M.S.Gate
of size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall
hall is minimum of 150m. Min. height of the compound wall shall be 1.80m above
plinth and thickness 230mm in brick masonry in CM (1:6).The compound wall shall be
constructed including earth work excavation in all types of soils for plinth beam of
230mm X 300mm and 0.75X0.75X1.20m size for column footing portions. The
footings shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a
C.C (1:4:8) prop bed of 100mm thick. The columns shall be of 230X230 mm in size
with VRCC M20 grade at 3.00m c/c spacing, having depth of 1.20m below ground
level and height of 2.00m above GL. The plinth beam of size of 230X300 mm shall be
constructed in VRCC M20 grade at Ground level, over a bed of CC(1:4:8)-
100mmthick. 450X450mm size columns in M20 grade shall be constructed for gate
pillars. All the materials shall be followed as per the standards.
Tie beam shall be provided above the brick work with 230X200mm size, fixed with
MS angular of 25mm X 25mm X 4mm in "Y" shape to height of 0.60m, with
embedded length of 150mm in concrete. The barbed wire fencing with 3 ply of 18
gauges shall be stretched in 4 rows (2x2). Plastering shall be done with 16mm thick in
two coats i.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4)

17
 prop on both sides of brick work.
Snowcem paint in two coats shall be provided for both sides of wall. The M.S
ornamental gate as per the approved drawings shall be provided with minimum of
3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged
on four corners of compound wall. If the length of the wall is increased/decreased
Note:-For every 1m increase/decrease in length of compound wall the
increase/decrease in basic rates of ELSRs of the capacities from 500KL to 2500KL
shall be as follows.:
i)500 KL : 0.086%
ii)1000 KL : 0.047%
iii)1500 KL : 0.034%
iv)2000 KL : 0.026%
v)2500 KL : 0.022 %
For intermediate capacities, interpolated percentages shall be adopted.
xiv) Staff Quarter shall be constructed for a minimum plinth area of 40 Sqm with the
following specification: RCC framed structure with concrete grade not less than M20
design mix at the locations specified by the department at the time of execution with
veranda, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts
excluding balconies and staircases.
MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright
CRCA conforming to IS 4351/76, Flush door shutters with solid bond wood bond
board doors shall be provided. N.C.L. Windows centre fixed both sides open able
shutter window 1.35 X 1.35mts outer frame section 48 x50mm shutter frame section
with a size of 48 X20 mm mullion section of size 48 X 50mm fixed beading section of
12 X 12 mm shall be provided. Flooring with polished Kadapa stone shall be provided.
Walls shall be provided with snowcem paint in two coats over primary coat. Electrical
and water supply arrangement shall be provided as directed by dept officer. Water
Storage tank made with plastic/polymer material of reputed make with necessary out
let and inlet connection pipes shall be provided. Septic tank for 5 users shall be
provided.
44 Rates for OHSRs/ELSRs
including fixtures with a
Rs/liter
staging of 10 m without
Seismic analysis.
a Up to 10,000 Liters capacity Per liter LAB-00682 74.32
b 15,000 Liters capacity Per liter LAB-00683 55.51
c 20,000 Liters capacity Per liter LAB-00684 50.22
d 40,000 Liters capacity Per liter LAB-00685 42.56
e 60,000 Liters capacity Per liter LAB-00686 32.26
f 1,00,000 Liters capacity Per liter LAB-00687 29.21
g 2,00,000 Liters capacity Per liter LAB-00688 25.53
h 3,00,000 Liters capacity Per liter LAB-00689 24.02
i 4,00,000 Liters capacity Per liter LAB-00690 21.15
j 4,50,000 Liters capacity Per liter LAB-00691 18.29
NOTE: -1). All concrete members shall be designed with M30 grade design mix.
2) For intermediate ranges proportional rates may be adopted

18
3) The above rates are arrived with base rate of Cement Rs.4220/- per MT (as per
G.o.Rt.No.2029 Water Resources (Reforms) Dept. Dt:06-10-2022) & Steel Rs 60000/-
per MT(Fe 500) (BoCE rates for the month of March-2024).
4)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for
SBC of 15 T/Sqm.
a) For every decrease of 2.50 T/Sqm of SBC, the rate shall be increased by 2.50% on
basic rate.
b) For every increase of 2.5 T/Sqm of SBC, the rate shall be decreased by 1.0% on
basic rate up to 20 T/Sqm
c) For SBC 10T/Sqm to 7.5 T/Sqm, solid raft shall be provided and for solid raft the
rate shall be increased by 10% on basic rate.
d) For SBC 7.5 T/Sqm to 5 T/Sqm, solid raft shall be provided and for solid raft the
rate shall be increased by 15% on basic rate
e) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which
additional payment shall be made as per field condition.
5) For every Meter of staging less than 10 m, the rate shall be reduced by Rs.0.05
paisa per liter per every Meter of difference in staging
6) For every Meter of staging above 10 m , the rate shall be increase by Rs.0.10 paisa
per liter per every Meter of additional in staging

7) The above rates shall be increased / decreased due to increase / decrease in the cost
of cement by Basic Rate x {(Rc-4220)/4220} x 0.07
Rc = Rate of cement (Rs per Mt) at the time of preparation of estimate.
8)The above rates shall be increased / decreased due to increase / decrease in the cost
of steel by Basic Rate x { (Rs-60000)/60000 x0.2}
Rs = Rate of steel (Rs per Mt) at the time of preparation of estimate.

9) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner
surface of the Reservoir including roof.

10) The above rates shall be adopted for estimate purposes for construction of ELSR
for a finished work including 2 coats of whether proof emulsion painting for external
surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections
but excluding cost of pipes, bends and valves as per departmental designs and
drawings.
11) The above rates are applicable for wind pressures up to 250 kg / Sq m .For decrease
in wind pressure the rate has to be decreased by 5% per every 100kg/Sqm. If the ELSR
/ OHSR are to be designed for seismic forces also, cost shall be arrived by working out
detailed quantities based on the designs.
12) (a)For tribal/Agency / Rural area, the above rates as arrived up to shall be increased
by 10%.
(b) An additional increase of 7.50% shall be allowed for OHSRs/ELSRs located in
agency areas over the above rates for RWS Department works.
13) If the ELSR is to be designed for seismic forces also, cost shall be arrived by
working out detailed quantities based on the design & difference to be paid extra.

19
 14) If the ELSR is to be designed for seismic forces a) The above rates are applied up
to Zone-II earth quake. b) For Zone-III earth quake the above rates are to be increased
by 15 %.

15) Fixtures include :

a) RCC or Aluminum ladder inside 0.60 m wide.
b) Spiral staircase on the outside shall be provided up to 200KL. Above 200KL
capacity dog legged staircase shall be provided with staircase flight width of 1.0mts
and landing width of 1.20mts with S.S railing up to 1.0 height.

c) Lightening arrestor, including conductor and earthling etc.

d) RCC ventilators with copper or stainless steel fly proof mesh.

e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2
Nos.
f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1
No.
g) The ladder shall be with M.S ladder and Verticals with HDPE of 10kg/Sqcm shall be
provided for single column OHSRs only.
h) Minimum staging for all
ELSR/OHSR shall be 10.0mts.
i) The increase in staging shall
be at 1.0mt interval.
j) The railing provided to the gallery and stair case shall be with stainless steel of grade
304 for a height of 1.20mts.
k). The dog legged staircase shall be enclosed with brick/CRS wall on three sides and
front side with M.S collapsible gate up to 1st brace level from ground level to prevent
unauthorized entry.
l). D.I swan neck ventilators shall be provided in top dome and slab.
m). The above rates are exclusive of all inlet, out let connection and valves. All valves
near inlet, out let and for scour of ELSRs shall be D.I valves of heavy duty confirming
to the specification of SoR item No.28

45 Construction of Rapid Gravity

Filtration Plant including all
civil, mechanical and electrical
works using sand as filter
media, compatible with
SCADA arrangements, duly
following relevant IS codes in
the design of plant components
including trial running for 90
days etc., including chlorine
contact tank & consumables
etc., complete.
1) 2.0 MLD Per liter LAB-00692 5.80
2) 5.0 MLD Per liter LAB-00693 4.73

20
3) 10.0 MLD Per liter LAB-00694 4.22
4) 20.0 MLD Per liter LAB-00695 3.39
5) 30.00 MLD and above Per liter LAB-00696 2.95
NOTE :-
a) For Intermediate Capacities proportional rates may be adopted
b) The above rates are arrived with base rate of Cement Rs.4220/- per MT (as per
G.o.Rt.No.2029 Water Resources (Reforms) Dept. Dt:06-10-2022) & Steel Rs 60000/-
per MT(Fe 500) (BoCE rates for the month of March-2024).
c) The above rates shall be increased / decreased due to increase / decrease in the cost
of cement by Basic Rate x {(Rc-4220)/4220} x 0.07
Rc = Rate of cement (Rs per Mt) at the time of preparation of estimate
d) The above rates shall be increased / decreased due to increase / decrease in the cost
of steel by
Basic Rate x{(Rs-60000)/60000} x0.2
Rs = Rate of Steel (Rs per MT) at the time of preparation of estimate.
e) For Rural areas an extra allowance of 10% shall be given on basic rate.
f)
i) For SBC below 10T/Sqm to 7.5 T/Sqm, solid raft shall be provided and for solid raft
the rate shall be increased by 10% on basic rate.
ii) For SBC below 7.5 T/Sqm to 5 T/Sqm, solid raft shall be provided and for solid raft
the rate shall be increased by 15% on basic rate.
g) For SBC value of less than 5 T/Sqm, soil improvement shall be adopted, for which
additional payment shall be made as per field condition.
h) For components immersed in water Stain less Steel of Grade 304L shall be used. for
other components 304 Grade steel shall be used.

i) Lab testing equipment of reputed make and consumables for one year. The testing
equipment for conducting all laboratory tests shall be installed & training shall be
imparted to the Municipal staff.
The above rates of Filtration Plants shall include all the following components.
A) Civil Works
(All works of VRCC Shall be in M30 design mix)
1). Stilling Chamber and Aeration cascade
2) Pre settling tank shall be provided for 30 MLD and above capacities of WTP for a
minimum of 1 hr capacity.
3). Raw water channel with Stainless Steel Weir of SS 304 L Grade material and also
with digital flow meters
4) Flash Mixer chamber with Flash mixing arrangements including SS shaft & SS
Blades with gear wheel arrangements etc, using 304 L Grade Steel.

5-a) Clariflocculator / Flocculation tanks with the components of central driven circular
clarifier with scrapper & bridge arrangements made with Stainless Steel Grade 304 L
tubes /angular for durability & chemical resistant with wheel arrangements etc,
5-b) Two numbers of Clariflocculator shall be provided for WTP's of more than 30
MLD capacity.

21
6) Filter house, Chemical house, Alum store, Laboratory room, Chlorination plant
room, toilet etc. (All structures shall be provided RCC roof only).Chemical house &
Chlorinator rooms are to be isolated and shall be as per CPHEEO manual.
7) Wash water tank of suitable capacity shall be constructed at minimum clearance of
2.00m, above the roof slab of Filter beds / any other structure, and the minimum
residual head at the top of under drain system shall not be less than 8.0 meters.
8) Chlorine contact tank
9) All the Doors and Windows shall be of Best Teak wood/Aluminum / UPVC make,
except entrance door. The entrance door including shutter in filter house shall be with
best teak wood of minimum size of 2.40 X 2.40 mts.
a) Main Doors of all individual Buildings shall be made of Best Teak wood
b) Other Internal Doors of the buildings shall be of Compressed wood/ Aluminum/
UPVC materials.
c) Ventilators shall be provided for each building/structure of suitable size as per NBC
standards.
10) a) All pipes in Plant shall be of D.I., D/F materials. All Connecting pipes of the
plant components such as from Flash mixer to Clariflocculator/ Clarifier/Flocculation
tank, to Filter beds, sludge disposal pipes shall be of D.I., D/F material. The size of
sludge disposal pipe shall be minimum of 450 mm dia. with D.I D/F pipe and
minimum length of 100 meters.
b) All the Valves in Plant shall be heavy duty and as per the specification of SoR
item No.28
11) The Pipe gallery way for Clear water/ Back wash water/ pipe connections shall be
sufficiently spaced for easy operation & maintenance and inspection, as per standard
norms.
12) The bottom level of the wash water control chamber must be above G.L so as to
dispose the wash water and sludge from Clariflocculator by gravity to disposal point.
Additional specifications
13) Railing for all the components (Clariflocculator, Filter House, Staircase etc,.) shall
be provided with Stainless Steel of grade 304 for a height of 1.00m, with 40mm dia.
pipe for top horizotals,25mm dia. for middle row and 40mm dia. verticals spaced at
interval of not more than 1.00m c/c.
14) Inspection / Path ways in filter beds: Middle pathway: Minimum of 1.50m,
Side pathway: Minimum of 1.20m
15)
i) Flooring in the buildings (Filter house, Chemical House, Chlorinator Room,
Laboratory) shall be provided with Non-skid ceramic tiles of approved make & quality,
as per standard specifications.
ii) All water Channels such as inlet, outlet channels and chambers shall be provided
with tiles.
16) The basement of the Filtration plant building shall be minimum of 1.20m and pipe
gallery shall be minimum 0.3m above the existing nearby Road top level.
17) Minimum head room of 2.00m shall be provided, at the alum mixing chambers in
alum store for inspection & maintenance.
18) The minimum width of entrance hall for the Filter House shall be 4.50m, and
Laboratory of min size of 3.30 X 4.50m.
18) b) For various components of the WTP should be designed by considering the
uplift pressure also.

22
19) a) High efficient Air Blowers shall be installed to the design requirement with low
noise pollution, environmental pollution as per PCB guide lines & Testing of blowers
as per I.S Standards at site. b) The Piping from Blower to Filter Beds shall be GI
and submerged pipe in water shall be HDPE.
20) UPVC pipes shall be provided for under drain system. Filter pipe manifolds shall
be assembled with HDPE pipes.

21) Alum storage capacity shall be designed for minimum period of 90 days.
Consumables shall be provided for 2115 Running Hours of WTP.

22) Chlorinator : Vacuum type chlorinator shall be provided with following

specifications:
a) Vacuum operated solution feeding type Vacuum Regulator, Rotameter, Rate setting
Valve, built-in NRV, Gas Overflow out let by man folding to mount the system with
the unit.
b) The unit shall consist of Ejector with necessary accessories such as Check Valve,
Drain Valve and Vacuum relief Valves - for control of chlorinator dosage.
c) The Accessories and manifolds shall be chlorine resistant and made of carbon steel
seam less pipes, copper tube with brass fittings of suitable size & dimensions, with
diaphragm sealed chlorine pressure gauge arrangements
d) Water Booster Pump of pumping capacity ranging from 2 cum/hr to 12 cum/hr, with
Head ranging from 16 to 35 m
e) The water & solution carrying pipes shall be made of UPVC material of suitable size
incl. all specials such as Tee's , Bends, couplings & NRVs and also Pressure Gauges of
suitable range.
f) Chlorine Gas Leak detector with alarm indicator.
The installation includes all necessary accessories, civil and mechanical works,
manifold header installations, injector fixing, connection with UPVC pipes, solution
piping’s, fixing of motors as per standard specifications and commissioning of
Chlorination Plant to the required demand, with a defect liability period of 1 year.
The chlorinator of may be of any reputed make or any make of Metito/Toshocow-Jesco
Siemens Industrial Devices.
g) Life breathing apparatus.
h) Chlorine escape BA set
i) 2 to 10 MLD Plants - 1Kg/hr Chlorinator- For Post Chlorination
ii) 10 MLD to 20 MLD Plants - 2 Kg/hr Chlorinator - For Post Chlorination.
iii) 20 MLD to 50 MLD Plants - 5 Kg/hr Chlorinator
- For Post Chlorination.
B) Mechanical Equipment
1) Alum dosing equipment with SS 304 material made stirrers & paddles for chemical
resistance. (Alum tanks must be bound with corrosion resistant material (HDPE Lining,
Bitumen Coating, tiles etc)
2) Flash mixer equipment with SS 304 material made stirrers & paddles for chemical
resistance.
3) Filtration plant equipment instrumentation and piping.
4) Clarifloccualation equipment (with stainless steel blades) with rotating bridge
arrangement etc.,
5) Pneumatic tyre wheel shall be provided for the bridge Clariflocculator.

23
6) Wash water tank fittings and pump sets with 100% stand by.
7) Air blower with motor of 100% stand by and pipe connections made with of SS
pipes confirming to SS 304 Grade, in filter bed region.
8) Chlorination equipment and pipe connections with chlorinator of 100% standby.
9) Spares & Tools for 2 years.
10) Gaseous Chlorination with cylinders has to be provided with protection measures.
C) Electrical Equipment
1) Necessary power supply wiring to motors and switches bus bar connections as per
IE Rules
2) Internal wiring and illumination and fittings and fixtures for internal and external
lighting exhaust fans, ceiling fans etc.
3) Erecting mechanical and electrical equipment, trial run for 90 days at 23.50 hours
per day testing the treated water as per CPHEEO standards and maintenance of records
and imparting training to staff.
4) Supply of 6 - Sets of completion plans and maintenance manual and brochures.
5) All cables shall be of copper material, Cable ducts shall be covered with MS /
Aluminum cheque plate.
6) Min LUX levels inside the treatment plant shall be maintained.
7) Yard lighting shall be provided as per norms.
D ) Equipment for Flow measurements
1) Equipment for measuring Conductivity, Turbidity, Ph value, Residual Chlorine with
recording & data storage facility (Computer based) & Alarm by SMS or other methods.
2) Off - Site Supervisory and Data Acquisition (OSSADA) system for Raw water &
Clear water flows by installing Digital Flow meters to measure the flows at Raw water
Channel and at each filter bed individually and combined for measuring the quantities
of water treated with a facility to record and store the readings & also to send
messages to the assigned designators about the variations/ deficiencies in the flow
including alerts for back wash requirements of filter beds, and recovery of data for the
past 360 days. All the Digital Flow Meters & Pressure Gauges shall be provided of
standard approved make. The equipment shall have the following specifications.
Hardware:
i) Wall mounted Sensor House for measuring Raw water & Clear water flow from
Filter bed out lets with accessories consists of
ii) Electrode Type: General type, Scraper type or replaceable type Electrode made with
material of SS external Ultra Touch Sensors as per requirement.
iii) Customized Application Requirement : Sensors with Interface logic control board
with serial interfaces, including accessories such as Add-on port, external DC Power
Socket, On - sensor Board Buffer, Timer, RS485 Communication, Analog to Digital
Sensing Sensor Circuit, 32 Sensors Sensing Tags, Interval Power Supply System ,
LCD 16c/2L, Filter Bed Working Status Indication LED, Filter Bed Wash Indication
Button and memory of Data Storage for 30Days , status of Filter Bed Level indicator,
Rating, Reading on LCB Display, Menu Driven Data for sending to Onsite Big
Display, operated with Battery Power of any reputed make or any equivalent make.

24
iv) Customized Application Requirement: Power Sensors Interface logic control board
with support 8 Power Sensing tags, Central System Interfacing Communication, On -
board analog to Digit Convert Integrate Circuit of any reputed make or any equivalent
make.
v) Customized Application Requirement: Centralized System with two serial
interfaces, 3 No’s of Add-On ports, One external DC Power Socket, On - Board
Buffer, On - Board Timer, On - Board RS485 Communication, On - Board RS 232
Communication, On - Board GPRS/GSM Module, On - Board Voice Chip, On - Board
Power Sensing Module, LCD 16c/2L, Filter Bed Wash Precaution Indication with Stop
Button, Memory of Data Storage for 30 Days, Total Bed Rating, Reading display on
LCD Display, Menu Driven, Menu Navigate Keypad, sending data to the Web Server,
Communication with GPRS , operated with Battery Power of any reputed make or any
equivalent make.
Software:
The software shall be designed with Web Domain with Data Base Server and Web
Name as per the directions of the Departmental Authorities.
The application of Software for Web design & Desktop shall meet the following
requirements:
i)Onsite Display: Letters with size of 1.5’ seven Segment LED Display with Interface
for each Filter Bed, for Onsite Display, by displaying the Bed Levels, Ratings,
Readings in 3 Columns, for each bed of the plant in successive rows and cumulative
results at the bottom of the screen.
ii) Off Site Display: Letters with size of 1.5’ seven Segment LED Display with
Interface GPRS/GSM Modules Offsite Display, with Display of Bed Total Rating,
Total Cumulative Reading as specified on On-site Display Features.
The system shall have also the features of Onsite Bed Wash Voice Precautions for Bed
Levels, Readings, Ratings, Bed Capacity Readings and Ratings and Bed Low Level
Triggering, before & after Bed wash.

The software shall also have the features of sending messages to the mobiles of the
Departmental designators indicating Bed Low Levels, Power Supply timings, Bed
Wash timings and its status, Power Supply timings and its status Grid View Table,
Motor Working time and its status Grid View Table, all trigger events and schedule
information and including all Snap View Reports, all Daily, Monthly, Yearly Reports,
all Power Working Reports, all Power Events Information etc,.

25
 1. S o R FOR R.C.C. PLAIN ENDED PIPES
Sl. No. Description
Manufacture, Supply and Delivery of R.C.C. Plain ended pipes conforming to
1 B.I.S 458/2003, Ex-factory, excluding transportation and all taxes.

Size Unit SoR For 2024-25

Code NP- 2 Code NP - 3 Code NP - 4
Class Class Class
80 mm dia. Meter MAT-
05615 147
100 mm dia. Meter MAT-
05616 169
150 mm dia. Meter MAT-
05617 201
200 mm dia. Meter MAT-
05618 237
225 mm dia. Meter MAT-
05619 257
250 mm dia. Meter MAT-
05620 272
300 mm dia. Meter MAT- MAT- MAT-
05621 393 05636 917 05651 941
350 mm dia. Meter MAT- MAT- MAT-
05622 488 05637 1097 05652 1120
400 mm dia. Meter MAT- MAT- MAT-
05623 565 05638 1208 05653 1238
450 mm dia. Meter MAT- MAT- MAT-
05624 691 05639 1388 05654 1405
500 mm dia. Meter MAT- MAT- MAT-
05625 758 05640 1507 05655 1745
600 mm dia. Meter MAT- MAT- MAT-
05626 1120 05641 2281 05656 2723
700 mm dia. Meter MAT- MAT- MAT-
05627 1432 05642 2843 05657 3671
800 mm dia. Meter MAT- MAT- MAT-
05628 1766 05643 3763 05658 4796
900 mm dia. Meter MAT- MAT- MAT-
05629 2238 05644 4738 05659 5988
1000 mm dia. Meter MAT- MAT- MAT-
05630 2732 05645 5777 05660 8208
1100 mm dia. Meter MAT- MAT- MAT-
05631 3213 05646 6961 05661 9528
1200 mm dia. Meter MAT- MAT- MAT-
05632 3830 05647 8210 05662 11150
1400 mm dia. Meter MAT- MAT- MAT-
05633 5242 05648 10595 05663 15437
1600 mm dia. Meter MAT- MAT- MAT-
05634 6056 05649 13799 05664 18543
1800 mm dia. Meter MAT- MAT- MAT-
05635 7956 05650 18352 05665 24927
Note : All prices are ex-works.
The above rates of RCC Plain ended pipes are based on the following raw materials
Cost Cement. Rs.4220/- per MT (Excluding all taxes and freight).
Steel (M.S. Rods) - Rs.57,000/- per MT. (Excluding all taxes and freight).

26
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall be
as per the following formula.
Revised Cost =Cost as per the above table +R1+R2
R1= Variation (increase / decrease) in cost (Rs. per Meter) due to change in the
Cost of M.S. Rods = (S2-S1)/1000 X Ws.
R2= Variation (increase / decrease) in cost (Rs. per Meter) due to change in the
Cost of Cement = (C2-C1)/1000 X Wc.
S1 = Rs. 57000/- , S2 = Cost of M S Rods (Rs. per MT Excluding all taxes and freight)
at the time of preparation of estimate.
C1 = Rs. 4220/- C2 = Cost of Cement (Rs. per MT Excluding all taxes and freight)
at the time of preparation of estimate.
Ws=Weight of MS Rods required (Kg.) per Meter of pipe as per IS:458/2003.
Wc= Weight of Cement required (Kg.) per Meter of pipe.

27
 2. S o R FOR R.C.C. COLLARS

Sl.No. Description
Manufacture, Supply and Delivery of R.C.C. Collars conforming to B.I.S. 458/2003 (rate
1 per each collar) suitable for R.C.C. Plain ended pipes including transportation but
excluding all taxes.
Size Unit SoR For 2024-25
Code NP - 2 Code NP - 3 Code NP - 4
Class Class Class
MAT-
80 mm dia. Each 05666
46.00
MAT-
100 mm dia. Each 05667
46.00
MAT-
150 mm dia. Each 05668
47.00
MAT-
200 mm dia. Each 05669
65.00
MAT-
225 mm dia. Each 05670
69.00
MAT-
250 mm dia. Each 05671
76.00
MAT- MAT- MAT-
300 mm dia. Each 05672
99.00
05687
141.00
05702
141.00
MAT- MAT- MAT-
350 mm dia. Each 05673
123.00
05688
177.00
05703
177.00
MAT- MAT- MAT-
400 mm dia. Each 05674
135.00
05689
202.00
05704
202.00
MAT- MAT- MAT-
450 mm dia. Each 05675
212.00
05690
269.00
05705
269.00
MAT- MAT- MAT-
500 mm dia. Each 05676
241.00
05691
321.00
05706
321.00
MAT- MAT- MAT-
600 mm dia. Each 05677
328.00
05692
420.00
05707
420.00
MAT- MAT- MAT-
700 mm dia. Each 05678
427.00
05693
567.00
05708
567.00
MAT- MAT- MAT-
800 mm dia. Each 05679
606.00
05694
721.00
05709
721.00
MAT- MAT- MAT-
900 mm dia. Each 05680
723.00
05695
839.00
05710
839.00
MAT- MAT- MAT-
1000 mm dia. Each 05681
845.00
05696
1050.00
05711
1050.00
MAT- MAT- MAT-
1100 mm dia. Each 05682
1034.00
05697
1333.00
05712
1333.00
MAT- MAT- MAT-
1200 mm dia. Each 05683
1258.00
05698
1668.00
05713
1668.00
MAT- MAT- MAT-
1400 mm dia. Each 05684
1620.00
05699
2114.00
05714
2114.00
MAT- MAT- MAT-
1600 mm dia. Each 05685
2073.00
05700
2709.00
05715
2709.00
MAT- MAT- MAT-
1800 mm dia. Each 05686
2127.00
05701
3494.00
05716
3494.00

The above rates of RCC Collars suitable to plain ended pipes are based on the following raw
materials cost. Cement. Rs.4220/- per MT(Excluding all taxes and freight).
Steel (M.S. Rods) - Rs.57000/- per MT.(Excluding all taxes and freight).
The revised cost of RCC collars due to increase / decrease in the cost of raw materials shall be
as per the following formula.
Revised Cost =Cost as per the above table +R1+R2

28
R1= Variation (increase / decrease) in cost (Rs. per each) due to change in the cost of M.S.
Rods =(S2-S1)/1000 X Ws.
R2= Variation (increase /decrease) in cost (Rs. per each) due
to change in the cost of Cement = (C2-C1)/1000 X Wc.
S1 = Rs. 57000/- , S2 = Cost of M S Rods (Rs. per MT excluding all taxes and freight) at the
time of preparation of estimate.
C1 = Rs.4220/-,
C2 = Cost of Cement (Rs. per MT excluding all taxes and freight) at the time of preparation of
estimate
Ws=Weight of MS Rods required (Kg.) per each collar.
Wc= Weight of Cement required (Kg.) per each collar.

29
 3. S o R FOR R.C.C. S/S PIPES (Non - Pressure)
Sl. No. Description
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes
1 conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length)
Excluding transportation and all taxes.
Size Unit SoR For 2024-25
Code NP - Code NP - 3 Code NP - 4
2 Class Class
Class
MAT- 183
80 mm dia. Meter 05717
MAT- 206
100 mm dia. Meter 05718
Meter MAT- 240
150 mm dia. 05719
Meter MAT- 293
200 mm dia. 05720
Meter MAT- 317
225 mm dia. 05721
Meter MAT- 338
250 mm dia. 05722
Meter MAT- 476 MAT- 1173 MAT- 1249
300 mm dia. 05723 05738 05753
Meter MAT- 611 MAT- 1457 MAT- 1483
350 mm dia. 05724 05739 05754
Meter MAT- 673 MAT- 1615 MAT- 1643
400 mm dia. 05725 05740 05755
Meter MAT- 840 MAT- 1783 MAT- 1794
450 mm dia. 05726 05741 05756
Meter MAT- 969 MAT- 2041 MAT- 2225
500 mm dia. 05727 05742 05757
Meter MAT- 1356 MAT- 2867 MAT- 2941
600 mm dia. 05728 05743 05758
Meter MAT- 1760 MAT- 3676 MAT- 3842
700 mm dia. 05729 05744 05759
Meter MAT- 2269 MAT- 4873 MAT- 5019
800 mm dia. 05730 05745 05760
Meter MAT- 2882 MAT- 6138 MAT- 6329
900 mm dia. 05731 05746 05761
Meter MAT- 3514 MAT- 6901 MAT- 7344
1000 mm dia. 05732 05747 05762
Meter MAT- 4088 MAT- 8168 MAT- 8688
1100 mm dia. 05733 05748 05763
Meter MAT- 4622 MAT- 9654 MAT- 10181
1200 mm dia. 05734 05749 05764
Meter MAT- 6623 MAT- 12788 MAT- 14474
1400 mm dia. 05735 05750 05765
Meter MAT- 8198 MAT- 16657 MAT- 17403
1600 mm dia. 05736 05751 05766
Meter MAT- 9155 MAT- 22148 MAT- 23419
1800 mm dia. 05737 05752 05767
Note: All the prices are ex-works. The above rates of RCC S/S Non-Pressure pipes are based
on the following raw materials cost.
Cement. Rs.4220/- per MT,(Excluding all taxes and freight).
Steel (M.S. Rods) – Rs.57000/- per MT. (Excluding all taxes and freight).
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall be
as per the following formula.

30
Revised Cost =Cost as per the above table +R1+R2
R1= Variation (increase / decrease) in cost (Rs. per Meter) due to change in the cost of
M.S. Rods = (S2-S1)/1000 X Ws.
R2= Variation (increase / decrease) in cost (Rs. per Meter) due to change in the cost of
Cement = (C2-C1)/1000 X Wc.
S1 = Rs. 57000/- , S2 = Cost of M S Rods (Rs. per MT excluding all taxes and freight) at
the time of preparation of estimate.
C1 = Rs. 4220/- , C2 = Cost of Cement (Rs. per MT excluding all taxes and freight) at the
time of preparation of estimate
Ws=Weight of MS Rods required (Kg.) per Meter of pipe as per IS: 458/2003.
WC= Weight of Cement required (Kg.) per Meter of pipe.

31
 4. S o R FOR R.C.C. S/S PIPES (Pressure)
Sl.No. Description
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes
1 conforming to B.I.S. 458/2003 Ex-factory (rate per meter of effective length)
Excluding transportation and all taxes.
Size Unit SoR For 2024-25
Code P1 - Code P2 - Code P3 -
Class Class Class
Meter MAT- MAT- MAT-
80 mm dia. 05768 241 05786 271 05802 311
Meter MAT- MAT- MAT-
100 mm dia. 05769 270 05787 326 05803 378
Meter MAT- MAT- MAT-
150 mm dia. 05770 374 05788 487 05804 603
Meter MAT- MAT- MAT-
200 mm dia. 05771 433 05789 625 05805 826
Meter MAT- MAT- MAT-
225 mm dia. 05772 488 05790 711 05806 921
Meter MAT- MAT- MAT-
250 mm dia. 05773 535 05791 760 05807 966
Meter MAT- MAT- MAT-
300 mm dia. 05774 719 05792 1089 05808 1361
Meter MAT- MAT- MAT-
350 mm dia. 05775 895 05793 1517 05809 1964
Meter MAT- MAT- MAT-
400 mm dia. 05776 1065 05794 2011 05810 2599
Meter MAT- MAT- MAT-
450 mm dia. 05777 1132 05795 2387 05811 3195
Meter MAT- MAT- MAT-
500 mm dia. 05778 1516 05796 2588 05812 3628
Meter MAT- MAT- MAT-
600 mm dia. 05779 2076 05797 3864 05813 5038
Meter MAT- MAT- MAT-
700 mm dia. 05780 2776 05798 5101 05814 6390
Meter MAT- MAT- MAT-
800 mm dia. 05781 3473 05799 6056 05815
7716
Meter MAT- MAT-
900 mm dia. 05782 4186 05800 7116
Meter MAT- MAT-
1000 mm dia. 05783 5310 05801 8157
Meter MAT-
1100 mm dia. 05784 6384
1200 mm dia. Meter MAT-
05785 7456
Note: All the prices are ex-works.

The above rates of RCC S/S Pressure pipes are based on the following raw materials cost.
Cement. Rs.4220/- per MT,(Excluding all taxes and freight).
Steel (M.S. Rods) - Rs.57000/- per MT. (Excluding all taxes and freight).
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall be
as per the following formula.
Revised Cost =Cost as per the above table +R1+R2

R1= Variation (increase / decrease) in cost (Rs. per Meter)due to change in the cost of M.S.
Rods = (S2-S1)/1000 X Ws.
32
R2= Variation (increase / decrease) in cost (Rs. per Meter)due to change in the cost of
Cement = (C2-C1)/1000 X Wc.
S1 = Rs. 57000/-
S2 = Cost of M S Rods (Rs. per MT excluding all taxes and freight) at the time of preparation
of estimate.
C1 = Rs. 4220/-, C2 = Cost of Cement (Rs. per MT excluding all taxes and freight) at the
time of preparation of estimate
Ws=Weight of MS Rods required (Kg) per Meter of pipe as per IS: 458 /2003.WC= Weight
of Cement required (Kg) per Meter of pipe.

33
 5. S o R FOR RUBBER RINGS TO SUIT R.C.C. S/S PIPES

Sl.
Description
No.
Manufacture, Supply and Delivery of Rubber rings to suit R.C.C.Socket and
Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubber ring)
1
including transportation but excluding all taxes. The Rubber Rings shall be tested
at the factory premises confirming to B.I.S. 5382/1985.
Size Unit SoR For 2024-25
Code NP - 2 Code NP - 3 Code NP - 4
Class Class Class
MAT- 28
80 mm dia. Each 05816
MAT- 34
100 mm dia. Each 05817
MAT- 61
150 mm dia. Each 05818
MAT- 72
200 mm dia. Each 05819
MAT- 79
225 mm dia. Each 05820
MAT- 88
250 mm dia. Each 05821
MAT- 108 MAT- 139 MAT- 139
300 mm dia. Each 05822 05837 05852
MAT- 125 MAT- 166 MAT- 166
350 mm dia. Each 05823 05838 05853
MAT- 138 MAT- 188 MAT- 188
400 mm dia. Each 05824 05839 05854
MAT- 156 MAT- 213 MAT- 213
450 mm dia. Each 05825 05840 05855
MAT- 203 MAT- 244 MAT- 244
500 mm dia. Each 05826 05841 05856
MAT- 267 MAT- 354 MAT- 354
600 mm dia. Each 05827 05842 05857
MAT- 267 MAT- 424 MAT- 424
700 mm dia. Each 05828 05843 05858
MAT- 461 MAT- 515 MAT- 515
800 mm dia. Each 05829 05844 05859
MAT- 577 MAT- 696 MAT- 696
900 mm dia. Each 05830 05845 05860
MAT- 675 MAT- 840 MAT- 840
1000 mm dia. Each 05831 05846 05861
MAT- 812 MAT- 1076 MAT- 1076
1100 mm dia. Each 05832 05847 05862
MAT- 1301 MAT- 1352 MAT- 1352
1200 mm dia. Each 05833 05848 05863
MAT- 1430 MAT- 1488 MAT- 1488
1400 mm dia. Each 05834 05849 05864
MAT- 1781 MAT- 1815 MAT- 1815
1600 mm dia. Each 05835 05850 05865
MAT- 2218 MAT- 2319 MAT- 2319
1800 mm dia. Each 05836 05851 05866

34
 Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Socket and
Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubber ring)
2
including transportation but excluding all taxes. The Rubber Rings shall be tested
at the factory premises confirming to B.I.S. 5382/1985.
P1- P2- P3-
Size Code Code Code
Class Class Class
MAT- 28 MAT- 28 MAT- 28
80 mm dia. Each 05867 05885 05901
MAT- 34 MAT- 36 MAT- 36
100 mm dia. Each 05868 05886 05902
MAT- 61 MAT- 61 MAT- 61
150 mm dia. Each 05869 05887 05903
MAT- 72 MAT- 72 MAT- 72
200 mm dia. Each 05870 05888 05904
MAT- 79 MAT- 81 MAT- 83
225 mm dia. Each 05871 05889 05905
MAT- 88 MAT- 92 MAT- 93
250 mm dia. Each 05872 05890 05906
MAT- 108 MAT- 114 MAT- 118
300 mm dia. Each 05873 05891 05907
MAT- 125 MAT- 142 MAT- 156
350 mm dia. Each 05874 05892 05908
MAT- 138 MAT- 188 MAT- 192
400 mm dia. Each 05875 05893 05909
450 mm dia. Each MAT- 156 MAT- 215 MAT- 221
05876 05894 05910
500 mm dia. Each MAT- 203 MAT- 244 MAT- 255
05877 05895 05911
600 mm dia. Each MAT- 267 MAT- 301 MAT- 307
05878 05896 05912
700 mm dia. Each MAT- 364 MAT- 398 MAT- 424
05879 05897 05913
800 mm dia. Each MAT- 461 MAT- 510 MAT- 510
05880 05898 05914
900 mm dia. Each MAT- 577 MAT- 644
05881 05899
1000 mm dia. Each MAT- 675 MAT- 777
05882 05900
1100 mm dia. Each MAT- 812
05883
1200 mm dia. Each MAT- 1301
05884

35
 6. S o R FOR CONVEYANCE OF R.C.C. PLAIN ENDED PIPES

Rate up to
5 Kms Rate for
Rate up to 5 Kms Rate for
Lead every
Lead including every
including additional
Sl.No. Description Loading, additional 1
Loading, 1 KM lead
unloading and KM lead or
unloading or part
stacking part thereof.
and thereof.
stacking
Conveyance of R.C.C plain ended pipes on all weathered roads including
1
loading, unloading and stacking (per Meter) SoR for 2024-25
NP - 2 Class NP - 3 Class & NP - 4 Class
80 mm dia. 4.92 0.21
100 mm dia. 6.54 0.21
150 mm dia. 9.83 0.40
200 mm dia. 13.09 0.40
225 mm dia. 14.73 0.63
250 mm dia. 16.37 0.63
300 mm dia. 22.93 0.83 63.84 1.67
350 mm dia. 32.74 1.87 68.76 1.87
400 mm dia. 36.02 2.07 81.86 2.48
450 mm dia. 47.47 2.48 88.40 2.90
500 mm dia. 50.76 2.90 96.58 2.90
600 mm dia. 73.66 4.57 145.68 6.45
700 mm dia. 93.31 6.45 162.06 7.47
800 mm dia. 109.68 6.45 194.80 7.47
900 mm dia. 126.04 6.45 255.36 14.11
1000 mm dia. 186.61 13.28 307.74 14.11
1100 mm dia. 204.60 13.28 333.94 15.35
1200 mm dia. 232.45 14.11 373.22 15.35
1400 mm dia. 279.92 14.11 507.46 15.98
1600 mm dia. 324.12 14.11 608.94 15.98
1800 mm dia. 373.22 14.11 811.92 22.43

36
 7. S o R FOR CONVEYANCE OF R.C.C. S/S PIPES

Rate up to 5 Rate for

Rate up to 5 Kms Rate for
Kms Lead every
Lead including every
Sl. including additional
Description Loading, additional 1
No. Loading, 1 KM lead
unloading & KM lead or
unloading or part
stacking part thereof.
and stacking thereof.
Conveyance of R.C.C. Socket and Spigot pipes on all-weather roads including loading,
1 unloading and stacking (per Meter of effective length)

Size NP - 2 & P1 Class NP – 3 & NP - 4 Class

80 mm dia. 6.54 0.19

100 mm dia. 6.54 0.38

150 mm dia. 11.46 0.38

200 mm dia. 14.73 0.75

225 mm dia. 16.37 0.75

250 mm dia. 18.01 1.70

300 mm dia. 29.48 1.88 77.44 2.27

350 mm dia. 34.36 2.08 84.19 2.63

400 mm dia. 34.36 2.44 104.40 4.92

450 mm dia. 49.11 2.63 114.49 4.92

500 mm dia. 54.02 2.84 126.28 5.29

600 mm dia. 70.39 4.92 170.05 7.54

700 mm dia. 86.75 5.30 228.97 14.90

800 mm dia. 119.48 8.11 271.08 14.90

900 mm dia. 178.43 14.53 313.16 14.90

1000 mm dia. 202.98 14.53 330.00 14.90

1100 mm dia. 229.16 14.91 353.58 14.90

1200 mm dia. 255.36 14.91 395.66 15.27

1400 mm dia. 317.57 14.91 530.36 15.27

1600 mm dia. 376.50 15.26 626.34 16.41

1800 mm dia. 466.52 15.26 835.11 22.45

P2 – Class P3 – Class

80 mm dia. 6.54 0.19 6.54 0.19

100 mm dia. 6.54 0.38 6.54 0.38

37
150 mm dia. 11.46 0.38 11.46 0.38

200 mm dia. 14.73 0.75 19.64 1.70

225 mm dia. 19.64 1.70 22.93 1.88

250 mm dia. 21.28 1.88 27.82 2.08

300 mm dia. 40.92 2.27 47.47 2.44

350 mm dia. 50.76 2.63 65.48 2.84

400 mm dia. 60.56 2.84 86.75 4.92

450 mm dia. 76.93 4.72 108.05 4.92

500 mm dia. 86.75 4.92 130.96 7.36

600 mm dia. 114.60 4.92 189.88 9.43

700 mm dia. 171.87 10.00 276.64 14.91

800 mm dia. 227.54 14.15 353.58 14.91

900 mm dia. 276.64 14.91

1000 mm dia. 340.48 15.26

38
 8. S o R FOR A.C. PIPES

Sl.No Description
1 2
Manufacture, Supply of A.C. Pressure pipes (Mazza process) as per BIS No: 1592/2003 as
amended from time to time duly marked with BIS mark, including cost of material, incidental
1 handling, loading and packing charges, but exclusive of transportation, unloading, stacking at
departmental stores, and excluding all taxes. The pipes shall be tested at factory premises
confirming to IS Code 1592/2003.
Size Unit SoR For 2024-25
Code Class – 15 Code Class – 20 Code Class - 25
MAT- MAT- MAT-
80 mm dia. Rate/Meter 05915
237 05933
259 05951
326
Rate/Meter MAT- MAT- MAT-
100 mm dia. 05916
313 05934
398 05952
488
Rate/Meter MAT- MAT- MAT-
125 mm dia. 05917
408 05935
509 05953
638
Rate/Meter MAT- MAT- MAT-
150 mm dia. 05918
574 05936
714 05954
899
Rate/Meter MAT- MAT- MAT-
200 mm dia. 05919
953 05937
1219 05955
1548
Rate/Meter MAT- MAT- MAT-
250 mm dia. 05920
1211 05938
1567 05956
1961
Rate/Meter MAT- MAT- MAT-
300 mm dia. 05921
1693 05939
2201 05957
2811
Rate/Meter MAT- MAT- MAT-
350 mm dia. 05922
2063 05940
2681 05958
3378
Rate/Meter MAT- MAT- MAT-
400 mm dia. 05923
2682 05941
3505 05959
4351
Rate/Meter MAT- MAT- MAT-
450 mm dia. 05924
3179 05942
4219 05960
5283
Rate/Meter MAT- MAT- MAT-
500 mm dia. 05925
3929 05943
5161 05961
6481
Rate/Meter MAT- MAT- MAT-
600 mm dia. 05926
5584 05944
7290 05962
9289
Rate/Meter MAT- MAT- MAT-
700 mm dia. 05927
7393 05945
10028 05963
12965
Rate/Meter MAT- MAT- MAT-
750 mm dia. 05928
8424 05946
11574 05964
14838
Rate/Meter MAT- MAT- MAT-
800 mm dia. 05929
9640 05947
13115 05965
16830
Rate/Meter MAT- MAT- MAT-
850 mm dia. 05930
10812 05948
14756 05966
18953
Rate/Meter MAT- MAT- MAT-
900 mm dia. 05931
12054 05949
16481 05967
21201
1000 mm Rate/Meter MAT- MAT- MAT-
05932
14881 05950 20237 05968 26070
dia.
2 Lowering, laying and jointing of AC pressure pipes with AC couplings or CID joints
complete with Rubber rings in readymade trenches true to alignment and gradient including
filling with water lead up to 500 mts and testing to required pressure including all sundries
but excluding cost of jointing materials and conveyance from source of supply as per BIS No.
6530/1972
LAB- LAB- LAB-
80 mm dia. Rate/Meter 00697
66 00715
66 00733
66
Rate/Meter LAB- LAB- LAB-
100 mm dia. 00698
96 00716
96 00734
96
Rate/Meter LAB- LAB- LAB-
125 mm dia. 00699
106 00717
106 00735
106
39
 Rate/Meter LAB- LAB- LAB-
150 mm dia. 00700
126 00718
126 00736
126
Rate/Meter LAB- LAB- LAB-
200 mm dia. 00701
166 00719
166 00737
166
Rate/Meter LAB- LAB- LAB-
250 mm dia. 00702
199 00720
199 00738
199
Rate/Meter LAB- LAB- LAB-
300 mm dia. 00703
244 00721
244 00739
244
Rate/Meter LAB- LAB- LAB-
350 mm dia. 00704
413 00722
413 00740
413
Rate/Meter LAB- LAB- LAB-
400 mm dia. 00705
622 00723
622 00741
622
Rate/Meter LAB- LAB- LAB-
450 mm dia. 00706
756 00724
756 00742
756
Rate/Meter LAB- LAB- LAB-
500 mm dia. 00707
961 00725
961 00743
961
Rate/Meter LAB- LAB- LAB-
600 mm dia. 00708
1033 00726
1033 00744
1033
Rate/Meter LAB- LAB- LAB-
700 mm dia. 00709
1153 00727
1153 00745
1153
Rate/Meter LAB- LAB- LAB-
750 mm dia. 00710
1282 00728
1282 00746
1282
Rate/Meter LAB- LAB- LAB-
800 mm dia. 00711
1349 00729
1349 00747
1349
Rate/Meter LAB- LAB- LAB-
850 mm dia. 00712
1440 00730
1440 00748
1440
Rate/Meter LAB- LAB- LAB-
900 mm dia. 00713
1571 00731
1571 00749
1571
1000 mm Rate/Meter LAB- LAB- LAB-
00714
1617 00732 1617 00750 1617
dia.
1. The above rates of AC Pipes are based on the Cement cost of RS 4220/- per MT
(Excluding all taxes and freight).
2. The above rates of AC pipes are based on the Fiber cost of Rs 78,800/- per M.T (Excluding
all taxes &Freight)
For any Increase/ Decrease in the rate of cement, the price of AC pipe per Rmt shall be
increased/decreased as under.
W x 0.85 x IC Where W = Weight of pipe in Kg’s/Rmt
IC = Increase/Decrease in cost of cement/Kg
For any increase/decrease in the rate of fiber, the price of AC pipe per Rmt shall be
increased/Decreased as under :
W x 0.15 X IF Where : W=: Weight of pipe in Kg’s/Rmt
IF = Increase /Decrease in cost of fiber/Kg
Note: 1) The Fiber rates are to be obtained from A.C. Pipe manufacturer of “Mazza” process.
2) The cement rate shall be communicated by the sub-committee of Board of Chief
engineers.
Transportation of AC pressure pipes at site of work anywhere in Andhra 5% on the basic
Pradesh on motor able roads for full truck loads including transit cost of
insurance, unloading, and stacking at site of work etc. Complete (AC corresponding
Couplings and Rubber rings are to be supplied free of transportation AC Pressure
charges). pipes.

40
 9. S o R FOR A.C. COUPLINGS

Sl.
Description
No.
Manufacture, Supply of A.C Couplings suitable to A.C. Pressure pipes (Mazza process)
as per BIS: 1592/2003 excluding cost of rubber rings to suit AC pressure pipes
1 including cost of material, incidental handling, packing, transportation and unloading at
site transit risk, but excluding all taxes and testing of joints as per IS Code.
Size Unit SoR For 2024-25
Class –
Code Class – 15 Code Class - 20 Code
25
MAT- MAT- MAT-
80 mm dia. Rate/Each 05969
112
05987
119
06005
138
MAT- MAT- MAT-
100 mm dia. Rate/Each 05970
143
05988
158
06006
187
MAT- MAT- MAT-
125 mm dia. Rate/Each 05971
183
05989
199
06007
240
MAT- MAT- MAT-
150 mm dia. Rate/Each 05972
211
05990
264
06008
326
MAT- MAT- MAT-
200 mm dia. Rate/Each 05973
387
05991
428
06009
543
MAT- MAT- MAT-
250 mm dia. Rate/Each 05974
454
05992
573
06010
727
MAT- MAT- MAT-
300 mm dia. Rate/Each 05975
593
05993
768
06011
988
MAT- MAT- MAT-
350 mm dia. Rate/Each 05976
766
05994
989
06012
1262
MAT- MAT- MAT-
400 mm dia. Rate/Each 05977
1181
05995
1540
06013
1968
MAT- MAT- MAT-
450 mm dia. Rate/Each 05978
1415
05996
1862
06014
2390
MAT- MAT- MAT-
500 mm dia. Rate/Each 05979
1685
05997
2251
06015
2872
MAT- MAT- MAT-
600 mm dia. Rate/Each 05980
2082
05998
2617
06016
3347
MAT- MAT- MAT-
700 mm dia. Rate/Each 05981
2732
05999
3682
06017
4786
MAT- MAT- MAT-
750 mm dia. Rate/Each 05982
3084
06000
4215
06018
5441
MAT- MAT- MAT-
800 mm dia. Rate/Each 05983
3499
06001
4744
06019
6140
MAT- MAT- MAT-
850 mm dia. Rate/Each 05984
3897
06002
5306
06020
6883
MAT- MAT- MAT-
900 mm dia. Rate/Each 05985
4313
06003
5899
06021
7659
1000 mm MAT- MAT- MAT-
Rate/Each 05986 5265 06004 7171 06022 9347
dia.

1. The above rates of AC Coupling are based on the Cement cost of RS 4220/- per MT (Excluding all
taxes and freight).
2. The above rates of AC Coupling are based on the Fiber cost of Rs 78,800/- per M.T (excluding all
taxes &Fright)
For any Increase/ Decrease in the rate of cement, the price of AC Coupling per Each shall be
increased/decreased as under.
W x 0.85 x IC Where W = Weight of Coupling in Kgs/each
IC = Increase/Decrease in cost of cement/kg

41
For any increase/decrease in the rate of fiber, the price of AC Coupling per each shall be
increased/Decreased as under:
W x 0.15 X IF Where: W= Weight of Coupling in Kgs/Each
IF = Increase /Decrease in cost of fiber/kg

The Fiber rates are to be obtained from A.C. Pipe manufacturer of “Mazza” process.

42
 10. S o R FOR RUBBER RINGS TO SUIT A.C. COUPLINGS

Sl. No. Description

Schedule of rate for supply of Rubber rings manufactured as per BIS: 5382/1988 with BIS
Mark embossed per each set suitable for A.C. Couplings including cost of material,
1 incidental, handling, packing and transportation and unloading at site transit risk etc., but
excluding all taxes. The Rubber Rings shall be tested at the factory premises confirming to
B.I.S 5382/1988
Size Unit SoR for 2024-25
Class Class Class
Code Code Code
– 15 – 20 - 25
MAT- 89 MAT- 89 MAT- 89
80 mm dia. Each Set 06023 06041 06059
MAT- 110 MAT- 110 MAT- 110
100 mm dia. Each Set 06024 06042 06060
MAT- 142 MAT- 142 MAT- 142
125 mm dia. Each Set 06025 06043 06061
MAT- 180 MAT- 180 MAT- 180
150 mm dia. Each Set 06026 06044 06062
MAT- 187 MAT- 187 MAT- 187
200 mm dia. Each Set 06027 06045 06063
MAT- 217 MAT- 217 MAT- 217
250 mm dia. Each Set 06028 06046 06064
MAT- 217 MAT- 217 MAT- 217
300 mm dia. Each Set 06029 06047 06065
MAT- 246 MAT- 246 MAT- 246
350 mm dia. Each Set 06030 06048 06066
MAT- 301 MAT- 301 MAT- 301
400 mm dia. Each Set 06031 06049 06067
MAT- 353 MAT- 353 MAT- 353
450 mm dia. Each Set 06032 06050 06068
MAT- 408 MAT- 408 MAT- 408
500 mm dia. Each Set 06033 06051 06069
MAT- 464 MAT- 464 MAT- 464
600 mm dia. Each Set 06034 06052 06070
MAT- 960 MAT- 960 MAT- 960
700 mm dia. Each Set 06035 06053 06071
MAT- 999 MAT- 999 MAT- 999
750 mm dia. Each Set 06036 06054 06072
MAT- 1074 MAT- 1074 MAT- 1074
800 mm dia. Each Set 06037 06055 06073
MAT- 1195 MAT- 1195 MAT- 1195
850 mm dia. Each Set 06038 06056 06074
MAT- 1257 MAT- 1257 MAT- 1257
900 mm dia. Each Set 06039 06057 06075
MAT- 1393 MAT- 1393 MAT- 1393
1000 mm dia. Each Set 06040 06058 06076

43
 11. S o R FOR PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES FOR THE YEAR 2024-25
Sl.No. Description
Manufacture, Supply, Delivery of Pre-stressed (Non-cylinder) concrete pipes conforming to IS 784/2001 ex-factory excluding
1 transportation, taxes For the following Field/Site Test Pressures.
(The manufacture shall design the pipes as per the IS Code 784-2001)
Size Unit SoR for 2024-25.
6 8 10 12 14 16
Code Code Code Code Code Code
Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2
350 MM MAT- 3614 MAT- 3627 MAT- 3641 MAT- 3660 MAT- 3733 MAT- 3863
Meter 06077 06096 06115 06134 06153 06172
DIA.
400 MM Meter MAT- 3883 MAT- 3912 MAT- 3954 MAT- 4006 MAT- 4079 MAT- 4141
DIA. 06078 06097 06116 06135 06154 06173
450 MM Meter MAT- 4128 MAT- 4148 MAT- 4195 MAT- 4276 MAT- 4386 MAT- 4481
DIA. 06079 06098 06117 06136 06155 06174
500 MM Meter MAT- 4469 MAT- 4487 MAT- 4524 MAT- 4619 MAT- 4716 MAT- 4854
DIA. 06080 06099 06118 06137 06156 06175
600 MM Meter MAT- 5129 MAT- 5166 MAT- 5221 MAT- 5381 MAT- 5553 MAT- 5723
DIA. 06081 06100 06119 06138 06157 06176
700 MM Meter MAT- 6014 MAT- 6100 MAT- 6243 MAT- 6421 MAT- 6607 MAT- 6865
DIA. 06082 06101 06120 06139 06158 06177
800 MM Meter MAT- 7296 MAT- 7459 MAT- 7632 MAT- 7863 MAT- 8101 MAT- 8477
DIA. 06083 06102 06121 06140 06159 06178
900 MM Meter MAT- 8371 MAT- 8586 MAT- 8811 MAT- 9188 MAT- 9480 MAT- 10167
DIA. 06084 06103 06122 06141 06160 06179
1000 Meter MAT- 9867 MAT- 10149 MAT- 10444 MAT- 10740 MAT- 11102 MAT- 11894
MM 06085 06104 06123 06142 06161 06180
DIA.
1100 Meter MAT- 11050 MAT- 11373 MAT- 11734 MAT- 12095 MAT- 12475 MAT- 13449
MM 06086 06105 06124 06143 06162 06181
DIA.
1200 Meter MAT- 12419 MAT- 12846 MAT- 13249 MAT- 13538 MAT- 14089 MAT- 15493
06087 06106 06125 06144 06163 06182

44
 MM
DIA.
1300 Meter MAT- 14074 MAT- 14555 MAT- 15037 MAT- 15522 MAT- 16915 MAT- 17525
MM 06088 06107 06126 06145 06164 06183
DIA.
1400 Meter MAT- 16290 MAT- 16854 MAT- 17430 MAT- 18383 MAT- 19548 MAT- 20409
MM 06089 06108 06127 06146 06165 06184
DIA.
1500 Meter MAT- 18393 MAT- 19063 MAT- 19693 MAT- 21377 MAT- 22146 MAT- 24739
MM 06090 06109 06128 06147 06166 06185
DIA.
1600 Meter MAT- 20681 MAT- 21403 MAT- 22129 MAT- 24144 MAT- 25015 MAT- 27524
MM 06091 06110 06129 06148 06167 06186
DIA.
1700 Meter MAT- 22191 MAT- 23032 MAT- 23860 MAT- 25982 MAT- 28786 MAT- 30082
MM 06092 06111 06130 06149 06168 06187
DIA.
1800 Meter MAT- 24538 MAT- 26104 MAT- 27525 MAT- 29846 MAT- 30952 MAT- 34273
MM 06093 06112 06131 06150 06169 06188
DIA.
1900 Meter MAT- 26190 MAT- 27631 MAT- 30062 MAT- 31787 MAT- 34555 MAT- 37211
MM 06094 06113 06132 06151 06170 06189
DIA.
2000 Meter MAT- 28790 MAT- 30586 MAT- 32190 MAT- 35124 MAT- 38765 MAT- 40294
MM 06095 06114 06133 06152 06171 06190
DIA.
Cost of lowering, laying jointing, testing to Hydrostatic field test pressure as per IS: 783 including cost of Rubber Rings, cost
2 transportation of water and emptying pipe line after completion of field testing etc., complete. (for a maximum depth of 4 Mtrs
below GL)
350 MM MAT- 360 MAT- 360 MAT- 360 MAT- 360 MAT- 360 MAT- 360
Meter 06191 06210 06229 06248 06267 06286
DIA.
400 MM Meter MAT- 388 MAT- 388 MAT- 388 MAT- 388 MAT- 388 MAT- 388

45
DIA. 06192 06211 06230 06249 06268 06287
450 MM Meter MAT- 447 MAT- 447 MAT- 447 MAT- 447 MAT- 447 MAT- 447
DIA. 06193 06212 06231 06250 06269 06288
500 MM Meter MAT- 476 MAT- 476 MAT- 476 MAT- 476 MAT- 476 MAT- 476
DIA. 06194 06213 06232 06251 06270 06289
600 MM Meter MAT- 587 MAT- 587 MAT- 587 MAT- 587 MAT- 587 MAT- 587
DIA. 06195 06214 06233 06252 06271 06290
700 MM Meter MAT- 685 MAT- 685 MAT- 685 MAT- 685 MAT- 685 MAT- 685
DIA. 06196 06215 06234 06253 06272 06291
800 MM Meter MAT- 776 MAT- 776 MAT- 776 MAT- 776 MAT- 776 MAT- 776
DIA. 06197 06216 06235 06254 06273 06292
900 MM Meter MAT- 849 MAT- 849 MAT- 849 MAT- 849 MAT- 849 MAT- 849
DIA. 06198 06217 06236 06255 06274 06293
1000 Meter MAT- 981 MAT- 981 MAT- 981 MAT- 981 MAT- 981 MAT- 981
MM IA 06199 06218 06237 06256 06275 06294
1100 Meter MAT- 1104 MAT- 1104 MAT- 1104 MAT- 1104 MAT- 1104 MAT- 1104
MM IA 06200 06219 06238 06257 06276 06295
1200 Meter MAT- 1221 MAT- 1221 MAT- 1221 MAT- 1221 MAT- 1221 MAT- 1221
MMDIA. 06201 06220 06239 06258 06277 06296
1300 Meter MAT- 1385 MAT- 1385 MAT- 1385 MAT- 1385 MAT- 1385 MAT- 1385
MM 06202 06221 06240 06259 06278 06297
DIA.
1400 Meter MAT- 1567 MAT- 1567 MAT- 1567 MAT- 1567 MAT- 1567 MAT- 1567
MM 06203 06222 06241 06260 06279 06298
DIA.
1500 Meter MAT- 1700 MAT- 1700 MAT- 1700 MAT- 1700 MAT- 1700 MAT- 1700
MM 06204 06223 06242 06261 06280 06299
DIA.
1600 Meter MAT- 1905 MAT- 1905 MAT- 1905 MAT- 1905 MAT- 1905 MAT- 1905
MM 06205 06224 06243 06262 06281 06300
DIA.
1700 Meter MAT- 2073 MAT- 2073 MAT- 2073 MAT- 2073 MAT- 2073 MAT- 2073

46
 MM 06206 06225 06244 06263 06282 06301
DIA.
1800 Meter MAT- 2192 MAT- 2192 MAT- 2192 MAT- 2192 MAT- 2192 MAT- 2192
MM 06207 06226 06245 06264 06283 06302
DIA.
1900 Meter MAT- 2315 MAT- 2315 MAT- 2315 MAT- 2315 MAT- 2315 MAT- 2315
MM 06208 06227 06246 06265 06284 06303
DIA.
2000 Meter MAT- 2439 MAT- 2439 MAT- 2439 MAT- 2439 MAT- 2439 MAT- 2439
MM 06209 06228 06247 06266 06285 06304
DIA.
Conveyance of Pre-stressed (Non-Cylinder) Concrete Pipes and accessories including loading at Factory, unloading at site and
3 stacking for the following sizes: (Minimum distance of 100 Kms to be considered, if the distance is less by 100 Kms from Factory
to Site)
350 MM Per 2.32 2.32 2.32 2.32 2.32 2.32
DIA. K.M/M
400 MM Per 2.32 2.32 2.32 2.32 2.32 2.32
DIA. K.M/M
450 MM Per 2.71 2.71 2.71 2.71 2.71 2.71
DIA. K.M/M
500 MM Per 2.84 2.84 2.84 2.84 2.84 2.84
DIA. K.M/M
600 MM Per 3.23 3.23 3.23 3.23 3.23 3.23
DIA. K.M/M
700 MM Per 5.30 5.30 5.30 5.30 5.30 5.30
DIA. K.M/M
800 MM Per 5.30 5.30 5.30 5.30 5.30 5.30
DIA. K.M/M
Per 5.30 5.30 5.30 5.30 5.30 5.30
900 MM K.M/M

47
DIA.
1000 Per 8.52 8.52 8.52 8.52 8.52 8.52
MM K.M/M
DIA.
1100 Per 8.52 8.52 8.52 8.52 8.52 8.52
MM K.M/M
DIA.
1200 Per 16.27 16.27 16.27 16.27 16.27 16.27
MM K.M/M
DIA.
1300 Per 16.53 16.53 16.53 16.53 16.53 16.53
MM K.M/M
DIA.
1400 Per 16.53 16.53 16.53 16.53 16.53 16.53
MM K.M/M
DIA.
1500 Per 16.53 16.53 16.53 16.53 16.53 16.53
MM K.M/M
DIA.
1600 Per 18.46 18.46 18.46 18.46 18.46 18.46
MM K.M/M
DIA.
1700 Per 18.46 18.46 18.46 18.46 18.46 18.46
MM K.M/M
DIA.
1800 Per 18.85 18.85 18.85 18.85 18.85 18.85
MM K.M/M
DIA.

48
 1900 Per 19.76 19.76 19.76 19.76 19.76 19.76
MM K.M/M
DIA.
2000 Per 19.76 19.76 19.76 19.76 19.76 19.76
MM K.M/M
DIA.
Cost of Machine End pair (Socket +Spigot) for providing M.S Specials on PSC pipelines excluding cost of M.S barrel including cost and
4
conveyance to site etc., complete.
350 MM Per MAT- 13052 MAT- 13052 MAT- 13052 MAT- 13052 MAT- 13052 MAT- 13052
06305 06315 06334 06353 06372 06391
DIA. Pair
400 MM Per MAT- 14900 MAT- 14900 MAT- 14900 MAT- 14900 MAT- 14900 MAT- 14900
06306 06316 06335 06354 06373 06392
DIA. Pair
450 MM Per MAT- 16863 MAT- 16863 MAT- 16863 MAT- 16863 MAT- 16863 MAT- 16863
06307 06317 06336 06355 06374 06393
DIA. Pair
500 MM Per MAT- 18827 MAT- 18827 MAT- 18827 MAT- 18827 MAT- 18827 MAT- 18827
06308 06318 06337 06356 06375 06394
DIA. Pair
600 MM Per MAT- 22407 MAT- 22407 MAT- 22407 MAT- 22407 MAT- 22407 MAT- 22407
06309 06319 06338 06357 06376 06395
DIA. Pair
700 MM Per MAT- 26219 MAT- 26219 MAT- 26219 MAT- 26219 MAT- 26219 MAT- 26219
06310 06320 06339 06358 06377 06396
DIA. Pair
800 MM Per MAT- 30030 MAT- 30030 MAT- 30030 MAT- 30030 MAT- 30030 MAT- 30030
06311 06321 06340 06359 06378 06397
DIA. Pair
900 MM Per MAT- 34073 MAT- 34073 MAT- 34073 MAT- 34073 MAT- 34073 MAT- 34073
06312 06322 06341 06360 06379 06398
DIA. Pair
1000 Per MAT- 36845 MAT- 36845 MAT- 36845 MAT- 36845 MAT- 36845 MAT- 36845
06313 06323 06342 06361 06380 06399
MM Pair
DIA.
Per MAT- 40772 MAT- 40772 MAT- 40772 MAT- 40772 MAT- 40772 MAT- 40772
1100 06314 06324 06343 06362 06381 06400

49
MM Pair
DIA.
1200 Per 44468 MAT- 44468 MAT- 44468 MAT- 44468 MAT- 44468 MAT- 44468
06325 06344 06363 06382 06401
MM Pair
DIA.
1300 Per 48048 MAT- 48048 MAT- 48048 MAT- 48048 MAT- 48048 MAT- 48048
06326 06345 06364 06383 06402
MM Pair
DIA.
1400 Per 57173 MAT- 57173 MAT- 57173 MAT- 57173 MAT- 57173 MAT- 57173
06327 06346 06365 06384 06403
MM Pair
DIA.
1500 Per 67452 MAT- 67452 MAT- 67452 MAT- 67452 MAT- 67452 MAT- 67452
06328 06347 06366 06385 06404
MM Pair
DIA.
1600 Per 75422 MAT- 75422 MAT- 75422 MAT- 75422 MAT- 75422 MAT- 75422
06329 06348 06367 06386 06405
MM Pair
DIA.
1700 Per 84893 MAT- 84893 MAT- 84893 MAT- 84893 MAT- 84893 MAT- 84893
06330 06349 06368 06387 06406
MM Pair
DIA.
1800 Per 97367 MAT- 97367 MAT- 97367 MAT- 97367 MAT- 97367 MAT- 97367
06331 06350 06369 06388 06407
MM Pair
DIA.
1900 Per 112959 MAT- 112959 MAT- 112959 MAT- 112959 MAT- 112959 MAT- 112959
06332 06351 06370 06389 06408
MM Pair
DIA.
2000 Per 132248 MAT- 132248 MAT- 132248 MAT- 132248 MAT- 132248 MAT- 132248
06333 06352 06371 06390 06409
MM Pair
DIA.

50
 Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 -
5 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site,
excluding Taxes etc., complete. (Rate per each Flange).
Diameter and Unit Code Rate Diameter and Unit Code Rate
thickness thickness
80 mm dia. x 15 Each Flange MAT- 936 500mm dia. x 20 mm Each Flange MAT-06420 9552
06410
mm thick Thick
100 mm dia. x 15 Each Flange MAT- 1282 600 mm dia. x 20 mm Each Flange MAT-06421 12024
06411
mm thick thick
125 mm dia. x 15 Each Flange MAT- 1548 700 mm dia. x 25 mm Each Flange MAT-06422 16979
06412
mm thick thick
150 mm dia. x 15 Each Flange MAT- 2056 750 mm dia. x 25 mm Each Flange MAT-06423 18665
06413
mm thick thick
200 mm dia. x 15 Each Flange MAT- 2576 800 mm dia. x 25 mm Each Flange MAT-06424 20906
06414
mm thick thick
250 mm dia. x 15 Each Flange MAT- 3350 900 mm dia. x 25 mm Each Flange MAT-06425 24012
06415
mm thick thick
300 mm dia. x 15 Each Flange MAT- 3812 1000 mm dia. x 25 Each Flange MAT-06426 28298
06416
mm thick mm thick
350 mm dia. x 18 Each Flange MAT- 5532 1050 mm dia. x 25 Each Flange MAT-06427 30053
06417
mm thick mm thick
400 mm dia. x 18 Each Flange MAT- 6907 1100 mm dia. x 25 Each Flange MAT-06428 32409
06418
mm thick mm thick
450 mm dia. x 18 Each Flange MAT- 8027 1200 mm dia. x 32 Each Flange MAT-06429 42931
06419
mm thick mm thick

51
Note:
Note: a) The above rate of PSC pipes are based on the HT wire cost of Rs.65,500/-MT (excluding all taxes and freight).
and cement price of Rs.4220/- per MT (excluding all taxes and freight)
The rates may be revised depending upon the increase/decrease in the cost of HT wire and cement. as per the following method. The cost of HT wire may be
obtained from reputed firms like SAIL/TATA/ SS Ltd. etc.,
Revised Cost =Cost as per the above table +R1+R2.
R1= Variation (increase / decrease) in cost (Rs. per metre)due to change in the cost of HT Wire =(H2-H1)/1000 X Wh.
R2= Variation (increase / decrease) in cost (Rs. per metre)due to change in the cost of Cement =(C2-C1)/1000 X Wc.
H1 = Rs.65,500/- H2 = Cost of HT Wire (Rs. Per MT excluding all taxes and freight) at the time of preparation of estimate.
C1 = Rs. 4220/- C2 = Cost of Cement (Rs. Per MT excluding all taxes and freight) at the time of preparation of estimate
Wh=Weight of HT Wire required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per metre of pipe.
The rates for MS flanges are considering MS Plates of Rs.66000/- per MT. Price variation to be released on actual weight of flange.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.

52
 12. S o R FOR PRE-STRESSED (CYLINDER) CONCRETE PIPES FOR THE YEAR 2024-25

S.
Description
No.

Manufacture, Supply, Delivery of BIS MARKED PRE-STRESSED (CYLINDER TYPE) CONCRETE PIPES as per IS: 784-2001 @ Ex-factory cost of pipes excluding
1 Transportation, Laying, Jointing, Testing, Bends, Tees, Specials, taxes and duties etc., for following Field / Line / Site test pressures:
Size Unit SoR For 2024-25
4 6 8 10 12 14 16 18 20
Code Code Code Code Code Code Code Code Code
Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2
400 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06430 6410 06448 6410 06466 6410 06484 6410 06502 6441 06520 6509 06538 6622 06556 6730 06574 6813
DIA.
450 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06431 6977 06449 6977 06467 6977 06485 7009 06503 7091 06521 7190 06539 7312 06557 7370 06575 7440
DIA.
500 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06432 7461 06450 7461 06468 7530 06486 7603 06504 7668 06522 7759 06540 7865 06558 7953 06576 8036
DIA.
600 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06433 8596 06451 8682 06469 8778 06487 8885 06505 8981 06523 9077 06541 9238 06559 9364 06577 9480
DIA.
700 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06434 9797 06452 9917 06470 10054 06488 10179 06506 10315 06524 10439 06542 10656 06560 10808 06578 10980
DIA.
800 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06435 11513 06453 11663 06471 11830 06489 12007 06507 12175 06525 12339 06543 12578 06561 12808 06579 13014
DIA.
900 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06436 13108 06454 13322 06472 13531 06490 13750 06508 13971 06526 14187 06544 14718 06562 15008 06580 15337
DIA.
1000 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06437 15714 06455 15972 06473 16237 06491 16511 06509 16774 06527 17044 06545 17736 06563 18115 06581 18493
DIA.
1100 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06438 17521 06456 17835 06474 18165 06492 18484 06510 18813 06528 19127 06546 19972 06564 20394 06582 20954
DIA.
1200 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06439 19524 06457 19906 06475 20281 06493 20667 06511 21065 06529 21444 06547 22445 06565 23040 06583 23593
DIA.
1300 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06440 21799 06458 22251 06476 22702 06494 23158 06512 23614 06530 24401 06548 25347 06566 25988 06584 26712
DIA.

53
 1400 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06441 24370 06459 24924 06477 25490 06495 26103 06513 27123 06531 27902 06549 28890 06567 29241 06585 30507
DIA.
1500 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06442 28818 06460 29494 06478 30089 06496 30696 06514 31887 06532 32564 06550 33488 06568 34872 06586 35625
DIA.
1600 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06443 32492 06461 33382 06479 34153 06497 35426 06515 36201 06533 37041 06551 38656 06569 39512 06587 40363
DIA.
1700 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06444 34969 06462 35949 06480 36734 06498 38187 06516 39059 06534 40854 06552 41928 06570 42900 06588 43872
DIA.
1800 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06445 38206 06463 39293 06481 41416 06499 42736 06517 44025 06535 46441 06553 48497 06571 49600 06589 50724
DIA.
1900 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM Meter 06446 44642 06464 45616 06482 47350 06500 48366 06518 50486 06536 51691 06554 53023 06572 54250 06590 55468
DIA.
2000 MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06447 06465 06483 06501 06519 06537 06555 06573 06591
Meter 47119 48905 50094 51301 53671 54999 56487 57854 59209
DIA.

2
Cost of laying jointing, testing to Hydrostatic field test pressure including cost of site welding and fixing of Polypropylene Diapher cloth, cost transportation of water and
emptying pipe line after completion of field testing.
400 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 741 06610 741 06628 741 06646 741 06664 741 06682 741 06700 741 06718 741 06736 741
DIA.
06592
450 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 871 06611 871 06629 871 06647 871 06665 871 06683 871 06701 871 06719 871 06737 871
DIA.
06593
500 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 948 06612 948 06630 948 06648 948 06666 948 06684 948 06702 948 06720 948 06738 948
DIA.
06594
600 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 1110 06613 1110 06631 1110 06649 1110 06667 1110 06685 1110 06703 1110 06721 1110 06739 1110
DIA.
06595
700 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 1263 06614 1263 06632 1263 06650 1263 06668 1263 06686 1263 06704 1263 06722 1263 06740 1263
DIA.
06596
800 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 1452 06615 1452 06633 1452 06651 1452 06669 1452 06687 1452 06705 1452 06723 1452 06741 1452
DIA.
06597
900 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 1636 06616 1636 06634 1636 06652 1636 06670 1636 06688 1636 06706 1636 06724 1636 06742 1636
DIA.
06598
1000 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 1792 1792 1792 1792 1792 1792 1792 1792 1792
06617 06635 06653 06671 06689 06707 06725 06743

54
 DIA. 06599
1100 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06600 2032 06618 2032 06636 2032 06654 2032 06672 2032 06690 2032 06708 2032 06726 2032 06744 2032
DIA.
1200 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06601 2217 06619 2217 06637 2217 06655 2217 06673 2217 06691 2217 06709 2217 06727 2217 06745 2217
DIA.
1300 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06602 2373 06620 2373 06638 2373 06656 2373 06674 2373 06692 2373 06710 2373 06728 2373 06746 2373
DIA.
1400 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06603 2612 06621 2612 06639 2612 06657 2612 06675 2612 06693 2612 06711 2612 06729 2612 06747 2612
DIA.
1500 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06604 2899 06622 2899 06640 2899 06658 2899 06676 2899 06694 2899 06712 2899 06730 2899 06748 2899
DIA.
1600 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06605 3138 06623 3138 06641 3138 06659 3138 06677 3138 06695 3138 06713 3138 06731 3138 06749 3138
DIA.
1700 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06606 3534 06624 3534 06642 3534 06660 3534 06678 3534 06696 3534 06714 3534 06732 3534 06750 3534
DIA.
1800 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06607 3747 06625 3747 06643 3747 06661 3747 06679 3747 06697 3747 06715 3747 06733 3747 06751 3747
DIA.
1900 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06608 4086 06626 4086 06644 4086 06662 4086 06680 4086 06698 4086 06716 4086 06734 4086 06752 4086
DIA.
2000 Meter MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT- MAT-
MM 06609 4351 06627 4351 06645 4351 06663 4351 06681 4351 06699 4351 06717 4351 06735 4351 06753 4351
DIA.
Conveyance of Pre-stressed (Cylinder) Concrete Pipes and accessories including loading at Factory, unloading at site and stacking for the following sizes: (Minimum
3
distance of 100 Kms to be considered, if the distance is less by 100 Kms from Factory to Site).
400
Per
MM
KM/M 1.93 1.93 1.93 1.93 1.93 1.93 1.93 1.93 1.93
DIA.
450
Per
MM
KM/M 1.93 1.93 1.93 1.93 1.93 1.93 1.93 1.93 1.93
DIA.
500
Per
MM
KM/M 2.71 2.71 2.71 2.71 2.71 2.71 2.71 2.71 2.71
DIA.
600
Per
MM
KM/M 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.10
DIA.

55
700
Per
MM
KM/M 4.91 4.91 4.91 4.91 4.91 4.91 4.91 4.91 4.91
DIA.
800
Per
MM
KM/M 4.91 4.91 4.91 4.91 4.91 4.91 4.91 4.91 4.91
DIA.
900
Per
MM
KM/M 4.91 4.91 4.91 4.91 4.91 4.91 4.91 4.91 4.91
DIA.
1000
Per
MM
KM/M 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75
DIA.
1100
Per
MM
KM/M 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75
DIA.
1200
Per
MM
KM/M 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37
DIA.
1300
Per
MM
KM/M 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37
DIA.
1400
Per
MM
KM/M 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37
DIA.
1500
Per
MM
KM/M 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37
DIA.
1600
Per
MM
KM/M 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37 15.37
DIA.
1700
Per
MM
KM/M 18.46 18.46 18.46 18.46 18.46 18.46 18.46 18.46 18.46
DIA.
1800
Per
MM
KM/M 18.46 18.46 18.46 18.46 18.46 18.46 18.46 18.46 18.46
DIA.
1900
Per
MM
KM/M 18.46 18.46 18.46 18.46 18.46 18.46 18.46 18.46 18.46
DIA.
2000
Per
MM
KM/M 19.62 19.62 19.62 19.62 19.62 19.62 19.62 19.62 19.62
DIA.

56
Note:
Note: The rates of PCCP pipes which were incorporated in the SoR are based on the following raw materials cost.
HT Wire: - Rs.65,500/- (excluding all taxes and freight)
HR Coil (Hot Rolled): - Rs.60,000/- (excluding all taxes and freight)
Cement Cost Rs. 4220/-.per MT (excluding all taxes and freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method.
Revised Cost =Cost as per the above table +R1+R2+R3.
R1= Variation (increase / decrease) in cost (Rs. per metre )due to change in the cost of HT Wire =(H2-H1)/1000 X Wh.
R2= Variation (increase / decrease) in cost (Rs. per metre) due to change in the cost of HR Coil =(R2-R1)/1000 X Wr.
R3= Variation (increase / decrease) in cost (Rs. per metre) due to change in the cost of Cement =(C2-C1)/1000 X Wc .
H1 = Rs.65,500/- H2 = Cost of HT Wire (Rs. Per MT excluding all taxes and freight) at the time of preparation of estimate.
R1 = Rs.60,000/- R2 = Cost of HR Coil (Rs. Per MT excluding all taxes and freight) at the time of preparation of estimate.
C1 = Rs. 4220/- C2 = Cost of Cement (Rs. Per MT excluding all taxes and freight) at the time of preparation of estimate
Wh=Weight of HT Wire required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per meter of pipe.
Wr = Weight of HR Coil required (kg) per metre of pipe.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate

57
 Public Health Items
13. S o R FOR BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES FOR THE YEAR 2024-25
Sl.No. Description

BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES (BIS MARKED) AS PER IS: 15155-2002 @ Ex-factory cost of pipes including Bends as per IS:7322
1 excluding Transportation, Laying, Jointing, Testing, Tees, Specials, taxes and duties etc., for following Field / Line / Site test pressures of Bar Wrapped
Steel Cylindrical Pipes:
4 -12 14 18 20 24
16 22 26 28 30
Size Unit Code Kg/c Code Kg/cm Code Code Kg/c Code Kg/cm Code Code Kg/c Code Code Code
Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2
m2 2
m2 2
m2
250 MM MAT- 3203 MAT- 3203 MAT- 3203 MAT- 3203 MAT- 3203 MAT- 3203 MAT- 3520 MAT- 3645 MAT- 3708 MAT- 3875
Meter
DIA. 06754 06767 06780 06793 06806 06819 06832 06845 06858 06871
300 MM MAT- 3588 MAT- 3588 MAT- 3588 MAT- 3588 MAT- 3588 MAT- 3775 MAT- 4257 MAT- 4430 MAT- 4544 MAT- 4752
Meter
DIA. 06755 06768 06781 06794 06807 06820 06833 06846 06859 06872
350 MM MAT- 4337 MAT- 4337 MAT- 4337 MAT- 4415 MAT- 4648 MAT- 4899 MAT- 5132 MAT- 5364 MAT- 5615 MAT- 5813
Meter
DIA. 06756 06769 06782 06795 06808 06821 06834 06847 06860 06873
400 MM MAT- 4790 MAT- 4790 MAT- 4899 MAT- 5216 MAT- 5508 MAT- 5816 MAT- 6110 MAT- 6421 MAT- 6654 MAT- 6969
Meter
DIA. 06757 06770 06783 06796 06809 06822 06835 06848 06861 06874
450 MM MAT- 5368 MAT- 5414 MAT- 5817 MAT- 6188 MAT- 6591 MAT- 6907 MAT- 7306 MAT- 7592 MAT- 7933 MAT- 8478
Meter
DIA. 06758 06771 06784 06797 06810 06823 06836 06849 06862 06875
500 MM MAT- 5828 MAT- 6265 MAT- 6731 MAT- 7226 MAT- 7637 MAT- 8179 MAT- 8624 MAT- 9023 MAT- 9624 MAT- 10141
Meter
DIA. 06759 06772 06785 06798 06811 06824 06837 06850 06863 06876
600 MM MAT- 7306 MAT- 7852 MAT- 8536 MAT- 9186 MAT- 9884 MAT- 10564 MAT- 1139 MAT- 12160 MAT- 12916 MAT- 13456
Meter
DIA. 06760 06773 06786 06799 06812 06825 06838 4 06851 06864 06877
700 MM MAT- 8850 MAT- 9881 MAT- 10769 MAT- 11681 MAT- 12757 MAT- 13681 MAT- 1456 MAT- 16014 MAT- 16827 MAT- 17477
Meter
DIA. 06761 06774 06787 06800 06813 06826 06839 8 06852 06865 06878
800 MM MAT- 10581 MAT- 12063 MAT- 13227 MAT- 14466 MAT- 15937 MAT- 17087 MAT- 1865 MAT- 19980 MAT- 21008 MAT- 22063
Meter
DIA. 06762 06775 06788 06801 06814 06827 06840 4 06853 06866 06879
900 MM MAT- 12952 MAT- 14598 MAT- 16041 MAT- 17608 MAT- 19178 MAT- 21076 MAT- 2247 MAT- 24292 MAT- 25974 MAT- 27502
Meter
DIA. 06763 06776 06789 06802 06815 06828 06841 0 06854 06867 06880
1000 MM MAT- 15273 MAT- 17341 MAT- 19499 MAT- 21473 MAT- 23215 MAT- 24746 MAT- 2694 MAT- 28969 MAT- 31780 MAT- 33274
Meter
DIA. 06764 06777 06790 06803 06816 06829 06842 3 06855 06868 06881
1100 MM MAT- 20570 MAT- 21035 MAT- 23174 MAT- 25542 MAT- 27836 MAT- 29915 MAT- 3312 MAT- 34857 MAT- 37819 MAT- 39887
Meter
DIA. 06765 06778 06791 06804 06817 06830 06843 0 06856 06869 06882
1200 MM MAT- 22472 MAT- 24098 MAT- 26688 MAT- 29376 MAT- 32101 MAT- 34580 MAT- 3808 MAT- 41585 MAT- 44800 MAT- 46909
Meter
DIA. 06766 06779 06792 06805 06818 06831 06844 2 06857 06870 06883
Cost of laying jointing, testing to Hydrostatic field test pressure including cost of site welding and fixing of Polypropylene Diapher cloth, cost transportation of water and
2
emptying pipe line after completion of field testing.
250 MM MAT- 504 MAT- 504 MAT- 504 MAT- 504 MAT- 504 MAT- 504 MAT- 504 MAT- 504 MAT- 504 MAT- 504
Meter
DIA. 06884 06897 06910 06923 06936 06949 06962 06975 06988 07001
300 MM MAT- 594 MAT- 594 MAT- 594 MAT- 594 MAT- 594 MAT- 594 MAT- 594 MAT- 594 MAT- 594 MAT- 594
Meter
DIA. 06885 06898 06911 06924 06937 06950 06963 06976 06989 07002
350 MM MAT- 702 MAT- 702 MAT- 702 MAT- 702 MAT- 702 MAT- 702 MAT- 702 MAT- 702 MAT- 702 MAT- 702
Meter
DIA. 06886 06899 06912 06925 06938 06951 06964 06977 06990 07003
400 MM MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786
Meter
DIA. 06887 06900 06913 06926 06939 06952 06965 06978 06991 07004
450 MM MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786 MAT- 786
Meter
DIA. 06888 06901 06914 06927 06940 06953 06966 06979 06992 07005

58
 Public Health Items
500 MM MAT- 983 MAT- 983 MAT- 983 MAT- 983 MAT- 983 MAT- 983 MAT- 983 MAT- 983 MAT- 983 MAT- 983
Meter
DIA. 06889 06902 06915 06928 06941 06954 06967 06980 06993 07006
600 MM MAT- 1209 MAT- 1209 MAT- 1209 MAT- 1209 MAT- 1209 MAT- 1209 MAT- 1209 MAT- 1209 MAT- 1209 MAT- 1209
Meter
DIA. 06890 06903 06916 06929 06942 06955 06968 06981 06994 07007
700 MM MAT- 1408 MAT- 1408 MAT- 1408 MAT- 1408 MAT- 1408 MAT- 1408 MAT- 1408 MAT- 1408 MAT- 1408 MAT- 1408
Meter
DIA. 06891 06904 06917 06930 06943 06956 06969 06982 06995 07008
800 MM MAT- 1603 MAT- 1603 MAT- 1603 MAT- 1603 MAT- 1603 MAT- 1603 MAT- 1603 MAT- 1603 MAT- 1603 MAT- 1603
Meter
DIA. 06892 06905 06918 06931 06944 06957 06970 06983 06996 07009
900 MM MAT- 1883 MAT- 1883 MAT- 1883 MAT- 1883 MAT- 1883 MAT- 1883 MAT- 1883 MAT- 1883 MAT- 1883 MAT- 1883
Meter
DIA. 06893 06906 06919 06932 06945 06958 06971 06984 06997 07010
1000 MM MAT- 2082 MAT- 2082 MAT- 2082 MAT- 2082 MAT- 2082 MAT- 2082 MAT- 2082 MAT- 2082 MAT- 2082 MAT- 2082
Meter
DIA. 06894 06907 06920 06933 06946 06959 06972 06985 06998 07011
1100 MM MAT- 2447 MAT- 2447 MAT- 2447 MAT- 2447 MAT- 2447 MAT- 2447 MAT- 2447 MAT- 2447 MAT- 2447 MAT- 2447
Meter
DIA. 06895 06908 06921 06934 06947 06960 06973 06986 06999 07012
1200 MM MAT- 2738 MAT- 2738 MAT- 2738 MAT- 2738 MAT- 2738 MAT- 2738 MAT- 2738 MAT- 2738 MAT- 2738 MAT- 2738
Meter
DIA. 06896 06909 06922 06935 06948 06961 06974 06987 07000 07013
Conveyance of Bar Wrapped steel Cylindrical (BWSC) pipes and accessories including loading at Factory, unloading at site and stacking for the following sizes:
3 (Minimum distance of 100 Kms to be considered, if the distance is less by 100 Kms from Factory to Site)
Per 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02
250 MM
KM/
DIA.
M
Per 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02
300 MM
KM/
DIA.
M
Per 1.35 1.35 1.35 1.35 1.35 1.35 1.35 1.35 1.35 1.35
350 MM
KM/
DIA.
M
Per 1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69
400 MM
KM/
DIA.
M
Per 2.22 2.22 2.22 2.22 2.22 2.22 2.22 2.22 2.22 2.22
450 MM
KM/
DIA.
M
Per 2.73 2.73 2.73 2.73 2.73 2.73 2.73 2.73 2.73 2.73
500 MM
KM/
DIA.
M
Per 2.89 2.89 2.89 2.89 2.89 2.89 2.89 2.89 2.89 2.89
600 MM
KM/
DIA.
M
Per 3.24 3.24 3.24 3.24 3.24 3.24 3.24 3.24 3.24 3.24
700 MM
KM/
DIA.
M
Per 4.26 4.26 4.26 4.26 4.26 4.26 4.26 4.26 4.26 4.26
800 MM
KM/
DIA.
M
Per 4.58 4.58 4.58 4.58 4.58 4.58 4.58 4.58 4.58 4.58
900 MM
KM/
DIA.
M
1000 MM Per 5.26 5.26 5.26 5.26 5.26 5.26 5.26 5.26 5.26 5.26
DIA. KM/

59
 Public Health Items
M
Per 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75
1100 MM
KM/
DIA.
M
Per 16.44 16.44 16.44 16.44 16.44 16.44 16.44 16.44 16.44 16.44
1200 MM
KM/
DIA.
M

Note:
The above rates of BWSC pipes are based on the following raw materials' cost.
HR Plates - Rs.60,000/- per MT (excluding all taxes and freight),
M.S. Wire rods - Rs.53000/- per MT(excluding all taxes and freight)
Cement Cost Rs. 4220/-.per MT (excluding all taxes and freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method.
Revised Cost =Cost as per the above table +R1+R2+R3.
R1= Variation (increase / decrease) in cost (Rs. per metre)due to change in the cost of HR Plate =(H2-H1)/1000 X Wh.
R2= Variation (increase / decrease) in cost (Rs. per metre)due to change in the cost of wire rods =(W2-W1)/1000 X Ww.
R3= Variation (increase / decrease) in cost (Rs. per metre)due to change in the cost of Cement =(C2-C1)/1000 X Wc .
H1 = Rs. 60,000/- H2 = Cost of HR Plate (Rs. Per MT excluding all taxes and freight) at the time of preparation of estimate.
W1 = Rs. 53000/- W2 = Cost of Wire rods (Rs. Per MT excluding all taxes and freight) at the time of preparation of estimate.
C1 = Rs. 4220/- C2 = Cost of Cement (Rs. Per MT excluding all taxes and freight) at the time of preparation of estimate
Wh=Weight of HR Plate required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per metre of pipe.
Ww = Weight of wire rods required (kg) per metre of pipe.
Note: Taxes as applicable shall be added as per rules at the time of preparation of estimate.

60
 Public Health Engineering Items

14. S o R FOR M.S. PIPES FOR THE YEAR 2024-25

Thicknes
Sl.No. Description Unit Code Rate
s in mm
1 Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS:
3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers
of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar
(1:3) 30mm thick by short crating or guniting duly providing wire mesh of size
50x50x3mm including cost of all materials, labor charges, transportation to anywhere
in AP, but excluding all taxes.
500 mm dia. Meter 8.00 MAT-07014 9900

600 mm dia. Meter 8.00 MAT-07015 11751

700 mm dia. Meter 8.00 MAT-07016 13679

700 mm dia. Meter 10.00 MAT-07017 16378

800 mm dia. Meter 8.00 MAT-07018 15488

800 mm dia. Meter 10.00 MAT-07019 18027
800 mm dia. Meter 12.00 MAT-07020 20564

900 mm dia. Meter 8.00 MAT-07021 16761

900 mm dia. Meter 10.00 MAT-07022 19675
900 mm dia. Meter 12.00 MAT-07023 22488

1000 mm dia. Meter 8.00 MAT-07024 18084

1000 mm dia. Meter 10.00 MAT-07025 21223
1000 mm dia. Meter 12.00 MAT-07026 24412
1000 mm dia. Meter 14.00 MAT-07027 27599

1100 mm dia. Meter 8.00 MAT-07028 19407

1100 mm dia. Meter 10.00 MAT-07029 22872
1100 mm dia. Meter 12.00 MAT-07030 26385
1100 mm dia. Meter 14.00 MAT-07031 29898
1100 mm dia. Meter 16.00 MAT-07032 33409

1200 mm dia. Meter 8.00 MAT-07033 20629

1200 mm dia. Meter 10.00 MAT-07034 24470

61
 Public Health Engineering Items

1200 mm dia. Meter 12.00 MAT-07035 28308

1200 mm dia. Meter 14.00 MAT-07036 32146
1200 mm dia. Meter 16.00 MAT-07037 36033
1200 mm dia. Meter 18.00 MAT-07038 39819

1300 mm dia. Meter 8.00 MAT-07039 21952

1300 mm dia. Meter 10.00 MAT-07040 26117
1300 mm dia. Meter 12.00 MAT-07041 30283
1300 mm dia. Meter 14.00 MAT-07042 34445
1300 MM DIA. Meter 16.00 MAT-07043 38557
1300 MM DIA. Meter 18.00 MAT-07044 42768
1300 MM DIA. Meter 20.00 MAT-07045 46929

1400 MM DIA. Meter 8.00 MAT-07046 23275

1400 MM DIA. Meter 10.00 MAT-07047 27716
1400 MM DIA. Meter 12.00 MAT-07048 32205
1400 MM DIA. Meter 14.00 MAT-07049 36744
1400 MM DIA. Meter 16.00 MAT-07050 41181
1400 MM DIA. Meter 18.00 MAT-07051 45668
1400 MM DIA. Meter 20.00 MAT-07052 50202
1400 MM DIA. Meter 22.00 MAT-07053 54687

1500 MM DIA. Meter 8.00 MAT-07054 24548

1500 MM DIA. Meter 10.00 MAT-07055 29364
1500 MM DIA. Meter 12.00 MAT-07056 34179
1500 MM DIA. Meter 14.00 MAT-07057 38943
1500 MM DIA. Meter 16.00 MAT-07058 43806
1500 MM DIA. Meter 18.00 MAT-07059 48618
1500 MM DIA. Meter 20.00 MAT-07060 53428
1500 MM DIA. Meter 22.00 MAT-07061 58237
1500 MM DIA. Meter 24.00 MAT-07062 63095

1600 MM DIA. Meter 8.00 MAT-07063 25872

1600 MM DIA. Meter 10.00 MAT-07064 30963
1600 MM DIA. Meter 12.00 MAT-07065 36154
1600 MM DIA. Meter 14.00 MAT-07066 41242

62
 Public Health Engineering Items

1600 MM DIA. Meter 16.00 MAT-07067 46381

1600 MM DIA. Meter 18.00 MAT-07068 51518
1600 MM DIA. Meter 20.00 MAT-07069 56703
1600 MM DIA. Meter 22.00 MAT-07070 61837
1600 MM DIA. Meter 24.00 MAT-07071 66972
1600 MM DIA. Meter 26.00 MAT-07072 72103

1700 MM DIA. Meter 8.00 MAT-07073 27194

1700 MM DIA. Meter 10.00 MAT-07074 32611
1700 MM DIA. Meter 12.00 MAT-07075 38076
1700 MM DIA. Meter 14.00 MAT-07076 43542
1700 MM DIA. Meter 16.00 MAT-07077 49005
1700 MM DIA. Meter 18.00 MAT-07078 54467
1700 MM DIA. Meter 20.00 MAT-07079 59929
1700 MM DIA. Meter 22.00 MAT-07080 65388
1700 MM DIA. Meter 24.00 MAT-07081 70847
1700 MM DIA. Meter 26.00 MAT-07082 76305
1700 MM DIA. Meter 28.00 MAT-07083 81811

1800 MM DIA. Meter 8.00 MAT-07084 28467

1800 MM DIA. Meter 10.00 MAT-07085 34259
1800 MM DIA. Meter 12.00 MAT-07086 40000
1800 MM DIA. Meter 14.00 MAT-07087 45790
1800 MM DIA. Meter 16.00 MAT-07088 51579
1800 MM DIA. Meter 18.00 MAT-07089 57367
1800 MM DIA. Meter 20.00 MAT-07090 63203
1800 MM DIA. Meter 22.00 MAT-07091 68988
1800 MM DIA. Meter 24.00 MAT-07092 74772
1800 MM DIA. Meter 26.00 MAT-07093 80556
1800 MM DIA. Meter 28.00 MAT-07094 86337
1800 MM DIA. Meter 30.00 MAT-07095 92118

1900 MM DIA. Meter 8.00 MAT-07096 29790

1900 MM DIA. Meter 10.00 MAT-07097 35908
1900 MM DIA. Meter 12.00 MAT-07098 41974
1900 MM DIA. Meter 14.00 MAT-07099 48089

63
 Public Health Engineering Items

1900 MM DIA. Meter 16.00 MAT-07100 54204

1900 MM DIA. Meter 18.00 MAT-07101 60317
1900 MM DIA. Meter 20.00 MAT-07102 66429
1900 MM DIA. Meter 22.00 MAT-07103 72539
1900 MM DIA. Meter 24.00 MAT-07104 78649
1900 MM DIA. Meter 26.00 MAT-07105 84757
1900 MM DIA. Meter 28.00 MAT-07106 90864
1900 MM DIA. Meter 30.00 MAT-07107 96969
1900 MM DIA. Meter 32.00 MAT-07108 103074

2000 MM DIA. Meter 8.00 MAT-07109 31063

2000 MM DIA. Meter 10.00 MAT-07110 37556
2000 MM DIA. Meter 12.00 MAT-07111 43947
2000 MM DIA. Meter 14.00 MAT-07112 50388
2000 MM DIA. Meter 16.00 MAT-07113 56828
2000 MM DIA. Meter 18.00 MAT-07114 63266
2000 MM DIA. Meter 20.00 MAT-07115 69703
2000 MM DIA. Meter 22.00 MAT-07116 76139
2000 MM DIA. Meter 24.00 MAT-07117 82574
2000 MM DIA. Meter 26.00 MAT-07118 89008
2000 MM DIA. Meter 28.00 MAT-07119 95441
2000 MM DIA. Meter 30.00 MAT-07120 101872
2000 MM DIA. Meter 32.00 MAT-07121 108303
2000 MM DIA. Meter 34.00 MAT-07122 114731

2100 MM DIA. Meter 8.00 MAT-07123 32385

2100 MM DIA. Meter 10.00 MAT-07124 39103
2100 MM DIA. Meter 12.00 MAT-07125 45871
2100 MM DIA. Meter 14.00 MAT-07126 52637
2100 MM DIA. Meter 16.00 MAT-07127 59402
2100 MM DIA. Meter 18.00 MAT-07128 66166
2100 MM DIA. Meter 20.00 MAT-07129 72929
2100 MM DIA. Meter 22.00 MAT-07130 79689
2100 MM DIA. Meter 24.00 MAT-07131 86450
2100 MM DIA. Meter 26.00 MAT-07132 93209
2100 MM DIA. Meter 28.00 MAT-07133 99967

64
 Public Health Engineering Items

2100 MM DIA. Meter 30.00 MAT-07134 106724

2100 MM DIA. Meter 32.00 MAT-07135 113529
2100 MM DIA. Meter 34.00 MAT-07136 120284
2100 MM DIA. Meter 36.00 MAT-07137 127086

2200 MM DIA. Meter 8.00 MAT-07138 33708

2200 MM DIA. Meter 10.00 MAT-07139 40752
2200 MM DIA. Meter 12.00 MAT-07140 47845
2200 MM DIA. Meter 14.00 MAT-07141 54937
2200 MM DIA. Meter 16.00 MAT-07142 62026
2200 MM DIA. Meter 18.00 MAT-07143 69116
2200 MM DIA. Meter 20.00 MAT-07144 76204
2200 MM DIA. Meter 22.00 MAT-07145 83241
2200 MM DIA. Meter 26.00 MAT-07146 97410
2200 MM DIA. Meter 28.00 MAT-07147 104494
2200 MM DIA. Meter 30.00 MAT-07148 111626
2200 MM DIA. Meter 32.00 MAT-07149 118707
2200 MM DIA. Meter 34.00 MAT-07150 125837
2200 MM DIA. Meter 36.00 MAT-07151 132964
2200 MM DIA. Meter 38.00 MAT-07152 140042

2300 MM DIA. Meter 10.00 MAT-07153 42400

2300 MM DIA. Meter 12.00 MAT-07154 49817
2300 MM DIA. Meter 16.00 MAT-07155 64600
2300 MM DIA. Meter 18.00 MAT-07156 72015
2300 MM DIA. Meter 20.00 MAT-07157 79428
2300 MM DIA. Meter 22.00 MAT-07158 86841
2300 MM DIA. Meter 26.00 MAT-07159 101662
2300 MM DIA. Meter 28.00 MAT-07160 109070
2300 MM DIA. Meter 30.00 MAT-07161 116478
2300 MM DIA. Meter 32.00 MAT-07162 123934
2300 MM DIA. Meter 34.00 MAT-07163 131390
2300 MM DIA. Meter 36.00 MAT-07164 138792
2300 MM DIA. Meter 38.00 MAT-07165 146245
2300 MM DIA. Meter 40.00 MAT-07166 153696

65
 Public Health Engineering Items

2400MM DIA. Meter 10.00 MAT-07167 44048

2400 MM DIA. Meter 12.00 MAT-07168 51742
2400 MM DIA. Meter 14.00 MAT-07169 59485
2400 MM DIA. Meter 16.00 MAT-07170 67226
2400 MM DIA. Meter 18.00 MAT-07171 74965
2400 MM DIA. Meter 20.00 MAT-07172 82704
2400 MM DIA. Meter 22.00 MAT-07173 90392
2400 MM DIA. Meter 26.00 MAT-07174 105862
2400 MM DIA. Meter 28.00 MAT-07175 113647
2400 MM DIA. Meter 30.00 MAT-07176 121379
2400 MM DIA. Meter 32.00 MAT-07177 129160
2400 MM DIA. Meter 34.00 MAT-07178 136891
2400 MM DIA. Meter 36.00 MAT-07179 144670
2400 MM DIA. Meter 38.00 MAT-07180 152449
2400 MM DIA. Meter 40.00 MAT-07181 160226
2400 MM DIA. Meter 42.00 MAT-07182 168002

2500 MM DIA. Meter 10.00 MAT-07183 45647

2500 MM DIA. Meter 14.00 MAT-07184 61783
2500 MM DIA. Meter 16.00 MAT-07185 69850
2500 MM DIA. Meter 18.00 MAT-07186 77865
2500 MM DIA. Meter 20.00 MAT-07187 85929
2500 MM DIA. Meter 22.00 MAT-07188 93992
2500 MM DIA. Meter 28.00 MAT-07189 118173
2500 MM DIA. Meter 30.00 MAT-07190 126282
2500 MM DIA. Meter 34.00 MAT-07191 142444
2500 MM DIA. Meter 36.00 MAT-07192 150549
2500 MM DIA. Meter 38.00 MAT-07193 158652
2500 MM DIA. Meter 40.00 MAT-07194 166755
2500 MM DIA. Meter 42.00 MAT-07195 174855
2500 MM DIA. Meter 44.00 MAT-07196 182955
2500 MM DIA. Meter 46.00 MAT-07197 191054

2600 MM DIA. Meter 12.00 MAT-07198 55689

2600 MM DIA. Meter 14.00 MAT-07199 64082
2600 MM DIA. Meter 16.00 MAT-07200 72424

66
 Public Health Engineering Items

2600 MM DIA. Meter 18.00 MAT-07201 80814

2600 MM DIA. Meter 20.00 MAT-07202 89204
2600 MM DIA. Meter 22.00 MAT-07203 97542
2600 MM DIA. Meter 32.00 MAT-07204 139565
2600 MM DIA. Meter 34.00 MAT-07205 147997
2600 MM DIA. Meter 36.00 MAT-07206 156427
2600 MM DIA. Meter 38.00 MAT-07207 164855
2600 MM DIA. Meter 40.00 MAT-07208 173283
2600 MM DIA. Meter 42.00 MAT-07209 181709
2600 MM DIA. Meter 44.00 MAT-07210 190135
2600 MM DIA. Meter 46.00 MAT-07211 198558
2600 MM DIA. Meter 48.00 MAT-07212 206931
2 Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site
Welding, Jointing Materials And Cost of Transportation of Water Including
Emptying Pipe Line After Completion Of Field Testing

400 MM DIA. Meter MAT-07213 926

500 MM DIA. Meter MAT-07214 1152
600 MM DIA. Meter MAT-07215 1417
700 MM DIA. Meter MAT-07216 1644
800 MM DIA. Meter MAT-07217 1876
900 MM DIA. Meter MAT-07218 2206
1000 MM DIA. Meter MAT-07219 2435
1100 MM DIA. Meter MAT-07220 2865
1200 MM DIA. Meter MAT-07221 3210
1300 MM DIA. Meter MAT-07222 3689
1400 MM DIA. Meter MAT-07223 4246
1500 MM DIA. Meter MAT-07224 4803
1600 MM DIA. Meter MAT-07225 5062
1700 MM DIA. Meter MAT-07226 5354
1800 MM DIA. Meter MAT-07227 6055
1900 MM DIA. Meter MAT-07228 7056
2000 MM DIA. Meter MAT-07229 8861
2100 MM DIA. Meter MAT-07230 10137
2200 MM DIA. Meter MAT-07231 11387
2300 MM DIA. Meter MAT-07232 13892
2400 MM DIA. Meter MAT-07233 16987

67
 Public Health Engineering Items

2500 MM DIA. Meter MAT-07234 19729

2600 MM DIA. Meter MAT-07235 22210

The above rates of MS Spiral pipes are based on the following raw materials cost.
MS Plates = Rs.66,000/- Per MT.(Excluding all taxes and freight).
The rates may be revised depending upon the increase/decrease in the cost of raw materials
(landed price) as per the following method.
Revised Cost = Cost of the pipe as per the above table +R1. R1= Variation
(Increase/Decrease) in cost (Rs. Per metre) due to change in cost of MS Plates= (M2-
M1)/1000 x Wm
M1= Rs 66,000/-
M2= Cost of MS Plates at the time of preparation of estimate excluding all taxes and freight
Wm=Weight of MS Plates in Kg’s per meter of pipe
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation
of estimate.

68
 Public Health Engineering Items

15. S.S. RATES FOR H.D.P.E PIPES FOR THE YEAR 2024-25. (PE - 80 Grade)

Sl.No Description 4.0 kg/sqcm

1 Manufacture, Supply, & Delivery of HDPE pipes conforming to IS 4984 -
2016 including transportation to anywhere in A.P, excluding all taxes (Supply
up to 90 mm dia. in coil & above 90 mm dia. straight Length)

Code Rate per Meter

OD 40 mm MAT-07236 40
OD 50 mm MAT-07237 61
OD 63 mm MAT-07238 81
OD 75 mm MAT-07239 112
OD 90 mm MAT-07240 160
OD 110 mm MAT-07241 239
OD 125 mm MAT-07242 306
OD 140 mm MAT-07243 381
OD 160 mm MAT-07244 499
OD 180 mm MAT-07245 631
OD 200 mm MAT-07246 771
OD 225 mm MAT-07247 977
OD 250 mm MAT-07248 1212
OD 280 mm MAT-07249 1510
OD 315 mm MAT-07250 1917
OD 355 mm MAT-07251 2499
OD 400 mm MAT-07252 3222
OD 450 mm MAT-07253 4133
OD 500 mm MAT-07254 5067
OD 560 mm MAT-07255 6268
OD 630 mm MAT-07256 7929
OD 710 mm MAT-07257 10079
OD 800 mm MAT-07258 12748
OD 900 mm MAT-07259 16152
OD 1000 mm MAT-07260 19889

Note: - Reliance Industries Resin cost adopted for the above rates are
For PE - 80 grade Rs.102970/- per MT. (Excluding all taxes).
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be
allowed as per the following price variation formula.
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost)
P2 = Revised pipe price in Rs. per Meter (Excluding all taxes).
P1 = Existing pipe price in Rs. per Meter (Excluding all taxes).
A2 = Revised price of raw material Rs. per MT excluding all taxes.
A1 = Existing price of raw material Rs. Per MT excluding all taxes
M = Weight of pipe in Kg’s per Meter as per weight chart.
The above formula for calculation of revised cost to be used for preparation of Estimates
only.

69
 Public Health Engineering Items

16. S o R FOR H.D.P.E PIPES FOR THE YEAR 2024-25. (PE - 100 Grades)

Sl.N Description 6.0 kg/ 8.0 kg/ 10.0 kg/ 12.5 16.0
o. sqcm sqcm sqcm kg/ kg/
sqcm sqcm

1 Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in
A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)

Code Rate Code Rate Code Rate Code Rate Code Rate per
per per per per Meter
Meter Meter Meter Meter
OD 20 mm MAT- 25
07355
OD 25 mm MAT- 37
07356
OD 32 mm MAT- 43 MAT- 50 MAT- 60
07309 07333 07357
OD 40 mm MAT- 54 MAT- 66 MAT- 80 MAT- 116
07285 07310 07334 07358
OD 50 mm MAT- 68 MAT- 84 MAT- 102 MAT- 124 MAT- 148
07261 07286 07311 07335 07359
OD 63 mm MAT- 110 MAT- 135 MAT- 168 MAT- 202 MAT- 237
07262 07287 07312 07336 07360
OD 75 mm MAT- 158 MAT- 195 MAT- 237 MAT- 286 MAT- 338
07263 07288 07313 07337 07361
OD 90 mm MAT- 225 MAT- 274 MAT- 340 MAT- 407 MAT- 485
07264 07289 07314 07338 07362
OD 110 mm MAT- 342 MAT- 412 MAT- 502 MAT- 608 MAT- 728
07265 07290 07315 07339 07363
OD 125 mm MAT- 437 MAT- 529 MAT- 648 MAT- 788 MAT- 936
07266 07291 07316 07340 07364
OD 140 mm MAT- 546 MAT- 665 MAT- 812 MAT- 990 MAT- 1177
07267 07292 07317 07341 07365
OD 160 mm MAT- 716 MAT- 873 MAT- 1064 MAT- 1289 MAT- 1534
07268 07293 07318 07342 07366
OD 180 mm MAT- 901 MAT- 1095 MAT- 1347 MAT- 1626 MAT- 1938
07269 07294 07319 07343 07367
OD 200 mm MAT- 1116 MAT- 1352 MAT- 1657 MAT- 2006 MAT- 2398
07270 07295 07320 07344 07368
OD 225 mm MAT- 1410 MAT- 1711 MAT- 2103 MAT- 2545 MAT- 3027
07271 07296 07321 07345 07369
OD 250 mm MAT- 1740 MAT- 2105 MAT- 2586 MAT- 3142 MAT- 3740
07272 07297 07322 07346 07370
OD 280 mm MAT- 2172 MAT- 2646 MAT- 3247 MAT- 3937 MAT- 4696
07273 07298 07323 07347 07371
OD 315 mm MAT- 2738 MAT- 3353 MAT- 4107 MAT- 4982 MAT- 5931
07274 07299 07324 07348 07372
OD 355 mm MAT- 3318 MAT- 4207 MAT- 5069 MAT- 6127 MAT- 7594
07275 07300 07325 07349 07373
OD 400 mm MAT- 4356 MAT- 5516 MAT- 6635 MAT- 8671 MAT- 9825
07276 07301 07326 07350 07374
OD 450 mm MAT- 5419 MAT- 6878 MAT- 8291 MAT- 10963 MAT- 12412
07277 07302 07327 07351 07375
OD 500 mm MAT- 6695 MAT- 8483 MAT- 10228 MAT- 13544 MAT- 15408
07278 07303 07328 07352 07376
OD 560 mm MAT- 7782 MAT- 9860 MAT- 11819 MAT- 15178
07279 07304 07329 07353
OD 630 mm MAT- 9810 MAT- 12473 MAT- 14972 MAT- 17984
07280 07305 07330 07354
OD 710 mm MAT- 12492 MAT- 15812 MAT- 19017
07281 07306 07331
OD 800 mm MAT- 15846 MAT- 20079 MAT- 24225
07282 07307 07332

70
 Public Health Engineering Items

OD 900 mm MAT- 20073 MAT- 25417

07283 07308
OD 1000 mm MAT- 24762
07284

Note: Reliance Industries Resin cost adopted for the above rates are

For PE - 100 grade Rs.104280/-per MT. (Excluding all taxes).

The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be
allowed as per the following price variation formula.

P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost)

P2 = P1 - (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost)
P2 = Revised pipe price in Rs. per Meter (Excluding all taxes).
P1 = Existing pipe price in Rs. per Meter (Excluding all taxes).
A2 = Revised price of raw material Rs. per MT excluding all taxes
A1 = Existing price of raw material Rs. per MT excluding all taxes
M = Weight of pipe in Kg’s per Meter as per weight chart.

The above formula for calculation of revised cost to be used for preparation of Estimates
only.

71
 Public Health Engineering Items

17.HDPE PIPES – (PE –100 Grade) SEWER LINES FOR THE YEAR 2024-25

6.0 kg/ 8.0 kg/ 10.0 kg/ 12.5 16.0

Sl.N sqcm sqcm sqcm kg/ kg/
Description
o sqcm sqcm
1 Manufacture, Supply, & Delivery of HDPE Pipes are conforming to IS 14333 - 2000 for using underground drainage and sewerage systems
including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm drain coil & above 90 mm dia. straight length)

Rate per Rate per Rate per Code Rate per Code Rate per
Meter Meter Meter Meter Meter
Code Code Code
MAT- MAT- MAT- MAT- MAT-
OD 63mm 116 146 175 209 251
07377 07400 07420 07439 07456
MAT- MAT- MAT- MAT- MAT-
OD 75 mm 165 210 251 298 355
07378 07401 07421 07440 07457
MAT- MAT- MAT- MAT- MAT-
OD 90 mm 233 299 355 422 512
07379 07402 07422 07441 07458
MAT- MAT- MAT- MAT- MAT-
OD 110 mm 337 426 509 610 729
07380 07403 07423 07442 07459
MAT- MAT- MAT- MAT- MAT-
OD 125 mm 430 550 658 780 942
07381 07404 07424 07443 07460
MAT- MAT- MAT- MAT- MAT-
OD 140 mm 539 685 825 983 1183
07382 07405 07425 07444 07461
MAT- MAT- MAT- MAT- MAT-
OD 160 mm 701 894 1076 1253 1538
07383 07406 07426 07445 07462
MAT- MAT- MAT- MAT- MAT-
OD 180 mm 884 1135 1361 1616 1946
07384 07407 07427 07446 07463
MAT- MAT- MAT- MAT- MAT-
OD 200 mm 1095 1400 1678 2003 2398
07385 07408 07428 07447 07464
MAT- MAT- MAT- MAT- MAT-
OD 225 mm 1381 1764 2122 2525 3039
07386 07409 07429 07448 07465
MAT- MAT- MAT- MAT- MAT-
OD 250 mm 1705 2183 2618 3116 3744
07387 07410 07430 07449 07466
MAT- MAT- MAT- MAT- MAT-
OD 280 mm 2130 2730 3265 3919 4702
07388 07411 07431 07450 07467
MAT- MAT- MAT- MAT- MAT-
OD 315 mm 2697 3457 4203 4944 5945
07389 07412 07432 07451 07468
MAT- MAT- MAT- MAT- MAT-
OD 355 mm 3418 4378 5267 6286 7542
07390 07413 07433 07452 07469
MAT- MAT- MAT- MAT- MAT-
OD 400 mm 4516 5780 6938 8273 9921
07391 07414 07434 07453 07470
MAT- MAT- MAT- MAT-
OD 450 mm 5699 7311 8787 10453
07392 07415 07435 07454
MAT- MAT- MAT- MAT-
OD 500 mm 7046 9014 10838 12918
07393 07416 07436 07455
MAT- MAT- MAT-
OD 560 mm 8810 11296 13597
07394 07417 07437
MAT- MAT- MAT-
OD 630 mm 11154 14298 17177
07395 07418 07438
MAT- MAT-
OD 710 mm 14450 18514
07396 07419
MAT-
OD 800 mm 18335
07397
MAT-
OD 900 mm 23222
07398
MAT-
OD 1000 mm 28691
07399

72
 Public Health Engineering Items

Note: Reliance Industries Resin cost adopted for the above rates are

For PE - 100 grade Rs.104280/-per MT. (Excluding all taxes).

The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be
allowed as per the following price variation formula.

P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost)

P2 = P1 - (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost)
P2 = Revised pipe price in Rs. per Meter excluding all taxes
P1 = Existing pipe price in Rs. per Meter excluding all taxes
A2 = Revised price of raw material Rs. per MT excluding all taxes
A1 = Existing price of raw material Rs. per MT excluding all taxes
M = Weight of pipe in Kgs per Meter as per weight chart.

The above formula for calculation of revised cost to be used for preparation of Estimates
only.

73
 Public Health Engineering Items

18. S o R FOR H.D.P.E- (PE –100 Grade) FITTINGS FOR THE YEAR 2024-25.

Manufacture, Supply, & Delivery of HDPE (PE –100 Grade) fittings conforming to
I
IS 4984 - 2016 including transportation to anywhere in A.P. Excluding all taxes.
I (a) PIPE ENDS LONG NECK Code Rate per Each
OD 50 mm MAT-07471 85
OD 63 mm MAT-07472 108
OD 75 mm MAT-07473 129
OD 90 mm MAT-07474 181
OD 110 mm MAT-07475 250
OD 125 mm MAT-07476 449
OD 140 mm MAT-07477 421
OD 160 mm MAT-07478 589
OD 180 mm MAT-07479 897
OD 200 mm MAT-07480 1153
OD 225 mm MAT-07481 1324
OD 250 mm MAT-07482 1552
OD 280 mm MAT-07483 1733
OD 315 mm MAT-07484 1998
OD 355 mm MAT-07485 4176
OD 400 mm MAT-07486 5565
OD 450 mm MAT-07487 9259
OD 500 mm MAT-07488 10305
(b) MS FLANGES Code Rate per Each
OD 50 mm MAT-07489 104
OD 63 mm MAT-07490 131
OD 75 mm MAT-07491 168
OD 90 mm MAT-07492 181
OD 110 mm MAT-07493 190
OD 125 mm MAT-07494 261
OD 140 mm MAT-07495 284
OD 160 mm MAT-07496 371
OD 180 mm MAT-07497 524
OD 200 mm MAT-07498 677
OD 225 mm MAT-07499 850
OD 250 mm MAT-07500 1004
OD 280 mm MAT-07501 1136
OD 315 mm MAT-07502 1339
OD 355 mm MAT-07503 2266
OD 400 mm MAT-07504 2810
OD 450 mm MAT-07505 3669
OD 500 mm MAT-07506 4201
(c) END CAPS Code Rate per Each

74
 Public Health Engineering Items

OD 50 mm MAT-07507 63
OD 63 mm MAT-07508 74
OD 75 mm MAT-07509 93
OD 90 mm MAT-07510 124
OD 110 mm MAT-07511 141
OD 125 mm MAT-07512 197
OD 140 mm MAT-07513 230
OD 160 mm MAT-07514 351
OD 180 mm MAT-07515 569
OD 200 mm MAT-07516 623
OD 225 mm MAT-07517 648
OD 250 mm MAT-07518 922
OD 280 mm MAT-07519 945
OD 315 mm MAT-07520 1288
OD 355 mm MAT-07521 1991
OD 400 mm MAT-07522 3476
OD 450 mm MAT-07523 5591
OD 500 mm MAT-07524 10305
(d) REDUCERS Code Rate per Each
OD 50 mm x 63 mm MAT-07525 85
OD 63 mm x 75 mm MAT-07526 124
OD 75 mm x 90 mm MAT-07527 205
OD 90 mm x 110 mm MAT-07528 281
OD 110 mm x 125 mm MAT-07529 429
OD 125 mm x 140 mm MAT-07530 595
OD 140 mm x 160 mm MAT-07531 830
OD 160 mm x 180 mm MAT-07532 1147
OD 180 mm x 200 mm MAT-07533 1483
OD 200 mm x 225 mm MAT-07534 1820
OD 225 mm x 250 mm MAT-07535 2481
OD 250 mm x 280 mm MAT-07536 3524
OD 280 mm x 315 mm MAT-07537 4983
OD 315 mm x 355 mm MAT-07538 5717
OD 355 mm x 400 mm MAT-07539 8065
OD 400 mm x 450 mm MAT-07540 8366
OD 450 mm x 500 mm MAT-07541 10726

(e) TEES Code Rate per Each

OD 50 mm MAT-07542 119
OD 63 mm MAT-07543 189
OD 75 mm MAT-07544 230
OD 90 mm MAT-07545 402

75
 Public Health Engineering Items

OD 110 mm MAT-07546 476

OD 125 mm MAT-07547 717
OD 140 mm MAT-07548 990
OD 160 mm MAT-07549 1705
OD 180 mm MAT-07550 2311
OD 200 mm MAT-07551 3182
OD 225 mm MAT-07552 4519
OD 250 mm MAT-07553 6187
OD 280 mm MAT-07554 8664
OD 315 mm MAT-07555 12345
OD 355 mm MAT-07556 17605
OD 400 mm MAT-07557 25785
MAT-07558 36626
OD 450 mm
MAT-07559 50301
OD 500 mm
Rate per
(f) BENDS
Code Each
OD 50 mm MAT-07560 74
OD 63 mm MAT-07561 167
OD 75 mm MAT-07562 217
OD 90 mm MAT-07563 369
OD 110 mm MAT-07564 488
OD 125 mm MAT-07565 722
OD 140 mm MAT-07566 950
OD 160 mm MAT-07567 1417
OD 180 mm MAT-07568 2035
OD 200 mm MAT-07569 2755
OD 225 mm MAT-07570 3911
OD 250 mm MAT-07571 5360
OD 280 mm MAT-07572 7726
OD 315 mm MAT-07573 10686
OD 355 mm MAT-07574 14813
OD 400 mm MAT-07575 22346
OD 450 mm MAT-07576 32850
OD 500 mm MAT-07577 44534

76
 Public Health Engineering Items

II Providing and Fixing electro Fusion Ferrule Tapping saddle manufactured from
virgin resin of PE-80/PE-100 having blue/black color using food grade compounded
raw material with quality assurance certificate from quality agencies like CIPET etc.
For usage in drinking water system and having working pressure of 10 bar. The cost
shall include testing of all materials, labor, inspection charges, transportation up to
site, transit insurance, loading, unloading, stacking, providing and fixing etc.
Complete as specified and directed by the Departmental Engineers, but excluding of
all taxes.
SIZE Code Rate Each
(Main pipe outer diameter in mm & Tapping size in
Inches)
63x1/2” MAT-07578 253
63 x3/4” MAT-07579 294
63 x1” MAT-07580 338
75 x1/2” MAT-07582 266
75 x3/4” MAT-07583 306
75 x1 MAT-07584 336
90 x1/2” MAT-07585 280
90 x3/4” MAT-07586 318
90 x1” MAT-07587 348
90 x 1 1/4” MAT-07588 348
90 x 1 1/2” MAT-07589 348
90 x2” MAT-07590 280
110x1/2” MAT-07591 318
110 x3/4” MAT-07592 348
110 x1” MAT-07593 348
110 x 1 1/4” MAT-07594 348
110x1 1/2” MAT-07595 348
110x2” MAT-07596 348
160 x1/2” MAT-07597 294
160 x3/4” MAT-07598 342
160 x1” MAT-07599 372
160 x 1 1/4” MAT-07600 372
160 x 1 1/2” MAT-07601 372
160 x 2” MAT-07602 372
200 x 1/2” MAT-07603 294
200 x 3/4” MAT-07604 355
200 x 1” MAT-07605 385
200 x 1 1/4” MAT-07606 385

77
 Public Health Engineering Items

200 x 2” MAT-07607 385

250 x 1/2” MAT-07608 372
250 x3/4” MAT-07609 408
250 x1” MAT-07610 444
250 x 1 1/4” MAT-07611 444
250 x1 1/2” MAT-07612 444
250 x 2” MAT-07613 444
315 x 1/2” MAT-07614 396
315 x3/4” MAT-07615 432
315x1” MAT-07616 492
315x1 1/4” MAT-07617 492
315x1 1/2” MAT-07618 492
315x2” MAT-07619 492

78
 Public Health Engineering Items

19. S o R FOR Double Wall Corrugated (DWC) Pipes FOR THE YEAR 2024-25

SoR
Sl.No. Description Unit Code RATES
2024-25

1 2 3 4 5
I Manufacture, supply, & delivery of (DWC) Meter
structured wall polyethylene/polypropylene
piping system with nonsmooth external annular
corrugated and smooth internal surface (Double
Wall) for nonpressure sewage & Drainage
application pipes of standard length 6 m, grade
conforming to IS 16098 (part-II: 2013)
including transportation to anywhere in A.P,
excluding all taxes.
Inner Dia. (mm)
Stiffness Class SN-8
100 MAT-07620 165
135 MAT-07621 270
150 MAT-07622 320
170 MAT-07623 385
200 MAT-07624 530
250 MAT-07625 825
300 MAT-07626 1120
400 MAT-07627 1870
500 MAT-07628 2900
600 MAT-07629 4850
800 MAT-07630 8200
1000 MAT-07631 13200

79
 Public Health Engineering Items

SoR
Sl.No. Description Unit Code RATES
2024-25

1 2 3 4 5
II Laying of SN8 structured wall (External Meter
Annular Corrugated & Smooth Internal surface)
Polythelene pipes, on the lower bedding
(Constructed at bottom of trenches) at
prescribed gradient, depth & alignment
including installation and jointing of the same
with the help of coupler (on line/ off line)
attached to one end of the pipe & sliding the
coupler end over the elastomeric sealing rubber
ring fitted on the specified valley of the spigot
end of next pipe, testing the water tightness of
the joint assembly, ensuring the continuity tests
of specified pipe segments etc. complete as per
drawing, specifications & detail engineering,
including carriage of pipes & fittings from site
stacks to the place of laying etc. as per direction
of Engineer-in-charge. (Payment to be made on
the basis of actual finished length of pipe line).
Inner Dia. (mm)
Stiffness Class SN-8
100 40
135 62
150 74
170 88
200 121
250 190
300 252
400 455
500 663
600 1144
800 1896
1000 3069

Manufacture, supply, & delivery of fittings & accessories compatible with DWC pipe
III - non smooth External Annular Corrugated and smooth Internal Surfaces (Double
Wall) for non-pressure or similar type of class SN8 Structured Wall polythelene
piping systems including transportation to anywhere in A.P, excluding GST and other
Government duties.
Inner Dia. (mm)

80
 Public Health Engineering Items

(a) Coupler Code Rate per Each

100 68
135 114
150 129
170 157
200 212
250 902
300 1313
400 1952
500 3823
600 4950
800 10492
1000 13790
(b) Sealing Ring Code Rate per Each
100 21
135 27
150 32
170 46
200 83
250 182
300 466
400 720
500 1,097
600 2,429
800 5,847
1000 8,244

81
 Public Health Engineering Items

20. SoR FOR PVC PIPES FOR THE YEAR 2024-25

TEST PRESSURE
Sl.
Description
No. 4.0 Kgs/cm2 6 Kgs/cm2 10 Kgs/cm2

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water
supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per
specification in light Grey/Natural Ivory Grey/ Any other Color (except White)
1 inclusive of transportation to the sub-divisional stores anywhere in AP excluding all
taxes.

Rate/ Rate/M Rate/M

DIA. IN MM Code Code Code
Meter eter eter
MAT-
16
20 07664
MAT-
25
25 07665
MAT-
38
32 07666
MAT- MAT-
36 57
40 07647 07667
MAT- MAT-
53 89
50 07648 07668
MAT- MAT- MAT-
58 84 125
63 07632 07649 07669
MAT- MAT- MAT-
84 115 182
75 07633 07650 07670
MAT- MAT- MAT-
116 166 258
90 07634 07651 07671
MAT- MAT- MAT-
168 241 387
110 07635 07652 07672
MAT- MAT- MAT-
221 308 504
125 07636 07653 07673
MAT- MAT- MAT-
275 396 625
140 07637 07654 07674
MAT- MAT- MAT-
362 512 821
160 07638 07655 07675
MAT- MAT- MAT-
462 660 1052
180 07639 07656 07676
MAT- MAT- MAT-
560 803 1280
200 07640 07657 07677
MAT- MAT- MAT-
748 1081 1719
225 07641 07658 07678
MAT- MAT- MAT-
870 1316 2084
250 07642 07659 07679
MAT- MAT- MAT-
1131 1660 2626
280 07643 07660 07680
MAT- MAT- MAT-
1434 2104 3323
315 07644 07661 07681
MAT- MAT-
1892 2743
355 07645 07662
MAT- MAT-
2385 3493
400 07646 07663

82
 Public Health Engineering Items

Note:
The resin cost adopted for the above rates is Rs.80030/- per MT (excluding all taxes)
The variation in cost of PVC pipes due to increase / decrease in raw material cost shall be
allowed subject to the following price variation formula.
The price variation formula to be adopted is as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)
P2 = Revised pipe price in Rs. Per Meter, P1 = Existing pipe price in Rs. Per Meter
A2 = Revised price of raw material Rs. Per MT,
A1 = Existing price of raw material Rs. Per MT
M = Weight of pipe in Kgs per Meter as per weight chart.

The above formula for calculation of revised cost to be used for preparation of Estimates
only.

83
 Public Health Engineering Items

21. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2024-25

S. No Description
1 Manufacture, Supply, & Delivery of Unplasticised Non-pressure
polyvinyl chloride(PVC-U) pipes of dark (any shade of brown) for use in
underground drainage & sewerage system conforming to IS
15328/2003) with solvent cement jointing as per specification inclusive
of transportation to the sub-divisional stores anywhere in A.P,
excluding all taxes
Pipe Series (S25) Code Rate per
Meter
OD 160 mm MAT-07682 305
OD 200 mm MAT-07683 464
OD 250mm MAT-07684 719
OD 315 mm MAT-07685 1136
Pipe Series (S20)
OD 125 mm MAT-07686 235
OD 160 mm MAT-07687 379
OD 200 mm MAT-07688 574
OD 250mm MAT-07689 894
OD 315 mm MAT-07690 1403
Pipe Series (S16.5)
OD 110 mm MAT-07691 209
OD 125 mm MAT-07692 281
OD 160 mm MAT-07693 440
OD 200 mm MAT-07694 683
OD 250mm MAT-07695 1059
OD 315 mm MAT-07696 1669

Note: The resin cost adopted for the above rates isRs.80030/- per MT (Excluding all taxes).
The variation in cost of PVC pipes due to increase / decrease in raw material cost shall be
allowed subject to the following price variation formula.
The price variation formula to be adopted is as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)
P2 = Revised pipe price in Rs. per Meter
P1 = Existing pipe price in Rs. per Meter
A2 = Revised price of raw material Rs. per MT
A1 = Existing price of raw material Rs. per MT
M = Weight of pipe in Kg’s per Meter as per weight chart.
The above formula for calculation of revised cost to be used for preparation of Estimates
only.

84
 Public Health Engineering Items

22. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2024-25

S. No Description
1 Manufacture, supply, & delivery of un-plasticized Non-Pressure Polyvinyl
Chloride(PVC-U) pipes of dark (any shade of Brown) for use in underground
drainage & sewerage system conforming to IS 15328/2003) with Elastomeric
Seal Ring Joints (Ringtite PVC Pipes)as per specification inclusive of
transportation to the Sub-Divisional stores anywhere in A.P, excluding all taxes

Pipe Series (S25) Code Rate per Meter

OD 160 mm MAT-07697 327
OD 200 mm MAT-07698 494
OD 250mm MAT-07699 768
OD 315 mm MAT-07700 1211
Pipe Series (S20)
OD 125 mm MAT-07701 254
OD 160 mm MAT-07702 400
OD 200 mm MAT-07703 609
OD 250mm MAT-07704 949
OD 315 mm MAT-07705 1493
Pipe Series (S16.5)
OD 110 mm MAT-07706 222
OD 125 mm MAT-07707 298
OD 160 mm MAT-07708 469
OD 200 mm MAT-07709 720
OD 250mm MAT-07710 1121
OD 315 mm MAT-07711 1771

Note: The resin cost adopted for the above rates isRs.80030/- per MT (Excluding all
taxes).The variation in cost of PVC pipes due to increase / decrease in raw material cost shall
be allowed subject to the following price variation formula.
The price variation formula to be adopted is as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)
P2 = Revised pipe price in Rs. per Meter
P1 = Existing pipe price in Rs. per Meter
A2 = Revised price of raw material Rs. per MT
A1 = Existing price of raw material Rs. per MT
M = Weight of pipe in Kg’s per Meter as per weight chart.
The above formula for calculation of revised cost to be used for preparation of Estimates
only.

85
 Public Health Engineering Items

23. SoR FOR CENTRIFUGALLY CAST (SPUN)IRON PRESSURE PIPES

Sl. No. Description Unit S.S. Rates for 2024-25

Socket and Spigot Centrifugally Cast (Spun) Iron pressure pipes for water, Gas and
Sewage conforming to specification No: IS 1536/1989 (third revision) with amdt. No:
1 & 2 in standard lengths of 3.66 m, 4 m, 4.5m, 5 m, 5.5 m & 6 m and details given
I below, suitable either for lead jointing or rubber gasket (push on) jointing at
purchasers option at ex-factory excluding transportation and all taxes.
Nominal dia. LA A B
Code Code Code
(in MM) Class Class Class
80 Rmt MAT-07712 1121 MAT-07729 1219 MAT-07746 1302
100 Rmt MAT-07713 1387 MAT-07730 1528 MAT-07747 1631
125 Rmt MAT-07714 1794 MAT-07731 1962 MAT-07748 2109
150 Rmt MAT-07715 2182 MAT-07732 2390 MAT-07749 2569
200 Rmt MAT-07716 3189 MAT-07733 3460 MAT-07750 3736
250 Rmt MAT-07717 4299 MAT-07734 4680 MAT-07751 5049
300 Rmt MAT-07718 5543 MAT-07735 6060 MAT-07752 6551
350 Rmt MAT-07719 6983 MAT-07736 7574 MAT-07753 8196
400 Rmt MAT-07720 8499 MAT-07737 9287 MAT-07754 10002
450 Rmt MAT-07721 10249 MAT-07738 11260 MAT-07755 12116
500 Rmt MAT-07722 11996 MAT-07739 13070 MAT-07756 14105
600 Rmt MAT-07723 15988 MAT-07740 17454 MAT-07757 18859
700 Rmt MAT-07724 20635 MAT-07741 22542 MAT-07758 24290
750 Rmt MAT-07725 23107 MAT-07742 25265 MAT-07759 27339
800 Rmt MAT-07726 25867 MAT-07743 28185 MAT-07760 30412
900 Rmt MAT-07727 31508 MAT-07744 34376 MAT-07761 37153
1000 Rmt MAT-07728 37852 MAT-07745 41351 MAT-07762 44563
II Conveyance of Centrifugally Cast (Spun) Iron Pressure Pipes and accessories
including loading at Factory, un-loading at site and stacking for the following sizes.
(The Minimum distance/lead in Km for destination below 100 Km to be taken as 100
Km)
SIZE IN MM LA A B
UNIT
80 0.34 0.34 0.34
Per
KM/RMT
100 0.34 0.34 0.34
Per
KM/RMT
125 0.50 0.50 0.50
Per
KM/RMT
150 0.50 0.50 0.50
Per
KM/RMT
200 0.85 0.85 0.85

86
 Public Health Engineering Items

Per
KM/RMT
250 1.02 1.02 1.02
Per
KM/RMT
300 1.33 1.33 1.33
Per
KM/RMT
350 1.84 1.84 1.84
Per
KM/RMT
400 2.17 2.17 2.17
Per
KM/RMT
450 2.52 2.52 2.52
Per
KM/RMT
500 3.00 3.00 3.00
Per
KM/RMT
600 3.00 3.00 3.00
Per
KM/RMT
700 3.00 3.00 3.00
Per
KM/RMT
750 5.01 5.01 5.01
Per
KM/RMT
800 8.52 8.52 8.52
Per
KM/RMT
900 8.52 8.52 8.52
Per
KM/RMT
1000 8.52 8.52 8.52
Per
KM/RMT
Note: Price Variation Formula due to Increase / Decrease in the cost of pig iron.
P2=P1+ (R2-R1)/1000*M*1.0
Where M= Weight of pipe in kg per Meter.
P2 = Revised rate of pipe in Rs. per Rmt
P1 = Rate of pipe in Rs. per Rmt as per above table.
R2 = Price of Pig Iron (Rs per MT excluding all taxes) at the time of preparation of
estimate.
R1 = Price of Pig Iron (Rs per MT excluding all taxes) at the time of preparation of SSR =Rs.
50,000/-
The above formula for calculation of revised cost to be used for preparation of Estimates
only.

87
 Public Health Engineering Items

24.S o R FOR DUCTILE IRON PRESSURE PIPES FOR THE YEAR 2024-25
Sl.
Description Unit Class of Pipe
No.
Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with
Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 &
1 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket d jointing)
with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory,
excluding transportation and all taxes.
Nominal Dia. Rmt Code K9
Code K7
in mm
80 Rmt 912 1081
100 Rmt MAT-07763 1087 MAT-07778 1300
150 Rmt MAT-07764 1571 MAT-07779 1942
200 Rmt MAT-07765 2131 MAT-07780 2587
250 Rmt MAT-07766 2836 MAT-07781 3427
300 Rmt MAT-07767 3615 MAT-07782 4372
350 Rmt MAT-07768 4633 MAT-07783 5521
400 Rmt MAT-07769 5556 MAT-07784 6590
450 Rmt MAT-07770 6702 MAT-07785 7943
500 Rmt MAT-07771 7895 MAT-07786 9164
600 Rmt MAT-07772 10574 MAT-07787 12212
700 Rmt MAT-07773 13447 MAT-07788 15429
750 Rmt MAT-07774 15188 MAT-07789 17484
800 Rmt MAT-07775 16695 MAT-07790 19056
900 Rmt MAT-07776 20535 MAT-07791 23391
1000 Rmt MAT-07777 24233 MAT-07792 27545
1100 Rmt MAT-07793 30137
1200 Rmt MAT-07794 35200
Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with plain
ends conforming to IS:8329/2000in standard working lengths of 4, 5, 5.5 & 6 meter for
2
classification K9 & K7 with cement mortar lining inside the pipes with outside zinc
coating. Rates are ex-factory, excluding transportation and all taxes.
Nominal Dia. Code K9
Code K7
in mm
100 Rmt MAT-07795 975 MAT-07810 1237
150 Rmt MAT-07796 1440 MAT-07811 1832
200 Rmt MAT-07797 1976 MAT-07812 2480
250 Rmt MAT-07798 2573 MAT-07813 3287
300 Rmt MAT-07799 3381 MAT-07814 4190
350 Rmt MAT-07800 4256 MAT-07815 5208
400 Rmt MAT-07801 5133 MAT-07816 6271

88
 Public Health Engineering Items

Sl.
Description Unit Class of Pipe
No.
450 Rmt MAT-07802 6120 MAT-07817 7419
500 Rmt MAT-07803 7281 MAT-07818 8814
600 Rmt MAT-07804 9620 MAT-07819 11415
700 Rmt MAT-07805 12627 MAT-07820 14476
750 Rmt MAT-07806 14101 MAT-07821 16181
800 Rmt MAT-07807 15617 MAT-07822 17880
900 Rmt MAT-07808 18899 MAT-07823 21602
1000 Rmt MAT-07809 22449 MAT-07824 25703
1100 Rmt MAT-07825 27861
1200 Rmt MAT-07826 29860
Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water,
gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for
3
classification K9 with cement mortar lining inside the pipes with outside zinc coating.
Rates are ex-factory, excluding transportation and all taxes.
Nominal
1.0 Mt. 2.0 Mt. 3.0 Mt. 4.0 Mt. 5.0 Mt.
Dia. in Unit Code Code Code Code Code
Length Length Length Length Length
mm
80 Each 3466 4481 5459 6316 8664

100 Each MAT- 3829 MAT- 4998 MAT- 6163 MAT- 7332 MAT- 9683
07827 07842 07857 07872 07887
150 Each MAT- 6127 MAT- 8305 MAT- 8985 MAT- 9621 MAT- 13339
07828 07843 07858 07873 07888
200 Each MAT- 8171 MAT- 11020 MAT- 11686 MAT- 12859 MAT- 17527
07829 07844 07859 07874 07889
250 Each MAT- 10686 MAT- 14673 MAT- 16291 MAT- 17317 MAT- 23755
07830 07845 07860 07875 07890
300 Each MAT- 13738 MAT- 18812 MAT- 21453 MAT- 22513 MAT- 30595
07831 07846 07861 07876 07891
350 Each MAT- 17710 MAT- 23080 MAT- 28684 MAT- 33408 MAT- 41080
07832 07847 07862 07877 07892
400 Each MAT- 23956 MAT- 31136 MAT- 38474 MAT- 41630 MAT- 50008
07833 07848 07863 07878 07893
450 Each MAT- 28296 MAT- 37656 MAT- 46447 MAT- 52195 MAT- 61536
07834 07849 07864 07879 07894
500 Each MAT- 31784 MAT- 41789 MAT- 51841 MAT- 61641 MAT- 71897
07835 07850 07865 07880 07895
600 Each MAT- 41664 MAT- 54143 MAT- 67162 MAT- 79502 MAT- 92639
07836 07851 07866 07881 07896
700 Each MAT- 52158 MAT- 68617 MAT- 84301 MAT- 100648 MAT- 113212
07837 07852 07867 07882 07897
800 Each MAT- 64412 MAT- 83272 MAT- 103584 MAT- 121895 MAT- 140864
07838 07853 07868 07883 07898
900 Each MAT- 79976 MAT- 103113 MAT- 125287 MAT- 149086 MAT- 171239
07839 07854 07869 07884 07899
1000 Each MAT- 97662 MAT- 126879 MAT- 153799 MAT- 181520 MAT- 209690
07840 07855 07870 07885 07900
1100 Each MAT- 138543 MAT- 177029 MAT- 211587 MAT- 236056 MAT- 269332
07841 07856 07871 07886 07901
Conveyance of Ductile Iron Pressure Pipes WELDED
and accessories including loading at Factory, DOUBLE
4 Class
un-loading at site and stacking for the FLANGED
following sizes PIPES
SIZE IN MM UNIT K7 K9 K9
80 Per KM/RMT 0.22 0.22 0.35

89
 Public Health Engineering Items

100 Per KM/RMT 0.26 0.26 0.40

150 Per KM/RMT 0.40 0.40 0.52
200 Per KM/RMT 0.40 0.52 0.79
250 Per KM/RMT 0.52 0.66 1.05
300 Per KM/RMT 0.79 0.79 1.32
350 Per KM/RMT 0.93 1.05 1.59
400 Per KM/RMT 1.05 1.19 1.85
450 Per KM/RMT 1.32 1.46 2.25
500 Per KM/RMT 1.59 1.72 2.64
600 Per KM/RMT 2.25 2.25 3.43
700 Per KM/RMT 3.30 3.30 5.03
750 Per KM/RMT 3.97 3.97 6.07
800 Per KM/RMT 6.74 6.74 10.04
900 Per KM/RMT 6.74 6.74 10.04
1000 Per KM/RMT 6.74 6.74 10.04
1100 Per KM/RMT 6.74 6.74 10.04
1200 Per KM/RMT 7.21 7.21
Supply and Delivery of Polyethylene (PE) Sleeves for Ductile Iron Pipes used to guard
5
the pipe against corrosion.
DIA. IN MM
RMT MAT-07902 47
100 MM DIA.
RMT MAT-07903 58
150 MM DIA.
RMT MAT-07904 74
200 MM DIA.
RMT MAT-07905 85
250 MM DIA.
RMT MAT-07906 93
300 MM DIA.
RMT MAT-07907 105
350 MM DIA.
RMT MAT-07908 147
400 MM DIA.
RMT MAT-07909 147
450 MM DIA.
RMT MAT-07910 177
500 MM DIA.
RMT MAT-07911 177
600 MM DIA.
RMT MAT-07912 231
700 MM DIA.
RMT MAT-07913 231
750 MM DIA.
RMT MAT-07914 231
800 MM DIA.
RMT MAT-07915 263
900 MM DIA.
RMT MAT-07916 263
1000 MM DIA.
RMT MAT-07917 323
1100 MM DIA.
6 Additional price for HAC(high alumina cement mortar lining)
DIA. IN MM

90
 Public Health Engineering Items

RMT MAT-07918 80
100 MM DIA.
RMT MAT-07919 106
150 MM DIA.
RMT MAT-07920 130
200 MM DIA.
RMT MAT-07921 155
250 MM DIA.
RMT MAT-07922 166
300 MM DIA.
RMT MAT-07923 188
350 MM DIA.
RMT MAT-07924 259
400 MM DIA.
RMT MAT-07925 259
450 MM DIA.
RMT MAT-07926 319
500 MM DIA.
RMT MAT-07927 319
600 MM DIA.
RMT MAT-07928 409
700 MM DIA.
RMT MAT-07929 409
750 MM DIA.
RMT MAT-07930 409
800 MM DIA.
RMT MAT-07931 467
900 MM DIA.
RMT MAT-07932 467
1000 MM DIA.
RMT MAT-07933 467
1100 MM DIA.
RMT MAT-07934 467
1200 MM DIA.

Note: Price Variation Formula due to Increase / Decrease in the cost of pig iron.
P2=P1+ (R2-R1)/1000*M*0.96, Where
M = Weight of pipe in kg per Meter as per I.S.8329-2000.
P2 = Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron(Rs per MT)) at the time of preparation of estimate.
R1 = Price of Pig Iron(Rs per MT) at the time of preparation of SoR =Rs.50,000/-(Excluding
all taxes).
The above formula for calculation of revised cost to be used for preparation of Estimates
only.

91
 Public Health Engineering Items

25. S o R FOR DUCTILE IRON FITTINGS FOR THE YEAR 2024-25

Sl. No. Description Unit Code Rate

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000
having dimensions as per table. The rates mentioned here under are for fittings,
zinc coated externally with inside mortar lining (with finishing as per class
13/IS 9523/2000) (ex-works) Excluding Transportation and all Taxes.
I DI double socket branch flange Tee
Up to 500 x 500 mm dia. Kg MAT-07935 135.56
Above 500 x 500 mm dia. Kg MAT-07936 149.47

II DI All Socket Tees

Up to 300 x 300 mm dia. Kg MAT-07937 135.56
Above 300 x 300 mm dia. Kg MAT-07938 149.47

III DI Double socket Tapers (Reducer)

Up to 500 x 450 mm dia. Kg MAT-07939 135.56
Above 500 x 450 mm dia. Kg MAT-07940 149.47

IV DI Flanged Socket
Up to 500 mm dia. Kg MAT-07941 135.56
Above 500 mm dia. Kg MAT-07942 149.47

V DI Flanged Spigot
Up to 500 mm dia. Kg MAT-07943 135.56
Above 500 mm dia. Kg MAT-07944 149.47

VI DI Double Socket Duck Foot Bend

Up to 300mm dia. Kg MAT-07945 135.56
Above 300mm dia. Kg MAT-07946 149.47

VII DI Double Flange Duck/Foot bend

Up to 300 mm dia. Kg MAT-07947 135.56
Above 300 mm dia. Kg MAT-07948 149.47

VIII DI All socket Cross.

Up to 300 x 300 mm dia. Kg MAT-07949 135.56
Above 300 x 300 mm dia. Kg MAT-07950 149.47

IX DI All Flange Tee

Up to 500 x 500 mm dia. Kg MAT-07951 135.56
Above 500 x 500 mm dia. Kg MAT-07952 149.47

X DI All Flange Cross

Up to 300 x 300 mm dia. Kg MAT-07953 135.56
Above 300 x 300 mm dia. Kg MAT-07954 149.47

92
 Public Health Engineering Items

XI DI Double Flange Reducer

Up to 500 x 450 mm dia. Kg MAT-07955 135.56
Above 500 x 450 mm dia. Kg MAT-07956 149.47

XII Blank Flange

Up to 500 mm dia. Kg MAT-07957 135.56
Above 500 mm dia. Kg MAT-07958 149.47

XIII Mechanical Joints

Up to 300 mm dia. Kg MAT-07959 135.56
Above 300 mm dia. Kg MAT-07960 149.47

XIV DI Double Socket Bends

Up to 500mm dia. Kg MAT-07961 135.56
Above 500 mm dia. Kg MAT-07962 149.47

XV DI Double Flanged Bends

Up to 500mm dia. Kg MAT-07963 135.56
Above 500 mm dia. Kg MAT-07964 149.47

XVI DI Manhole Frame &cover Kg 135.56

93
 Public Health Engineering Items

26. S o R FOR RUBBER GASKETS SUITABLE FORC.I/ D.I. S/S PIPES FOR THE
YEAR 2024-25

Sl. No. Description Unit Code Rate

1 2 3 4
Manufacture as per BIS: 12820/89 with S.B.R. Quality Rubber confirming to BIS:
5382/85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes
anywhere in A.P. F.O.R. Destination departmental stores including cost of material,
1
loading, incidental handling with companies standard packing, transportation,
unloading & stacking but excluding all taxes.

80mm dia. Each MAT-07965 45

100mm dia. Each MAT-07966 70
125mm dia. Each MAT-07967 84
150mm dia. Each MAT-07968 102
200mm dia. Each MAT-07969 123
250mm dia. Each MAT-07970 138
300mm dia. Each MAT-07971 210
350mm dia. Each MAT-07972 266
400mm dia. Each MAT-07973 294
450mm dia. Each MAT-07974 344
500mm dia. Each MAT-07975 478
600mm dia. Each MAT-07976 604
700mm dia. Each MAT-07977 803
750mm dia. Each MAT-07978 946
800mm dia. Each MAT-07979 1135
900mm dia. Each MAT-07980 1370
1000mm dia. Each MAT-07981 1498

94
 27.SoR FOR CI PIPES AND SPECIALS FOR THE YEAR 2024-25

Rate/ Kg
including
packing,
forwarding,
Sl. Quality or Transit risk
Description Code
No. sort and delivery
anywhere in
A.P. for the
year 2024-
25 (Rs.)
1 Manufacture, Supply and Delivery of Cast Iron Pipes I.S. No.
and Fittings (spls.) Conforming to IS. No. 7181/1986
7181/1986, 5531/1988, 3950/1979 and C.I.D Joints 5531/1988
confirming to is No.8794/1988 at site of work 3950/1979 MAT-07982 81.48
anywhere in A.P. Including, loading, unloading, &
transportation to site of work stacking at site transit 8794/1988
risk and package, excluding taxes and duties.

Foot Note: The rate of CI pipes, CI Specials and CID Joints etc., which are to be
incorporated in the SoR are based on the following raw materials cost.
Pig Iron:Rs.50,000/- per M.T. (Excluding all taxes).
Coke : Rs.28,079/- per M.T. (Excluding all taxes).

The rates may be revised depending upon the increase/decrease in the cost of raw materials as
per the following method. For every increase/decrease of Rs.1000/- in the cost of raw
materials or part there of proportionately.
In respect of Pig Iron: The increase/decrease in cost of CI Specials per Kg is 3.43%.
In respect of coke: The increase/decrease in cost of CI Specials per Kg is 0.67%.

The above price is at site of work.

Note-1: The above formula for calculation of revised cost to be used for preparation of
Estimates only.

95
 28. S o R FOR WATER HAMMER CONTROL DEVICES FOR THE YEAR 2024-25
(Rate Each in Rs.)

Sl.
Description
No. TEST PRESSURE
10 Kgs/cm2 15 Kgs/cm2 20 Kgs/cm2 25 Kgs/cm2
Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves
1 (QRDA) as per AWWA, Ex-factory excluding transportation and all taxes.

DIA. IN MM Code Rate/Each Code Rate/Each Code Rate/Each Code Rate/Each

MAT- 70689 MAT- 81294 MAT- 89422 MAT- 98361
100 07983 07986 07989 07992
MAT- 107425 MAT- 123539 MAT- 135892 MAT- 149481
150 07984 07987 07990 07993
MAT- 114661 MAT- 131858 MAT- 145046 MAT- 159550
200 07985 07988 07991 07994
Conveyance of
valves and
accessories
including
2 loading at 5% on basic cost of valves
factory and
unloading,
stacking at site
of work.

96
 29. S o R FOR VALVES CONFORMING TO IS for normal usage 2024-25.

Sl.
Description
No.
Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to
date amendments, if any) including gear arrangements for the following dia. as per test
pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust
plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts,
1 Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel
with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with
Rubber; Gear, Gear housing with Cast Steel excluding all taxes and transportation, etc.
complete ISI marked.
PN 1.0 (MPa) PN 1.6 (MPa)

DIA. IN MM Code Rate/Each Code Rate/Each

50 9720 12150
100 13088 14400
150 20607 21150
200 27280 34100
250 41580 47429
300 63580 71682
350 78980 98725
400 135080 168850
450 MAT-07995 168080 MAT-08004 210100
500 MAT-07996 210980 MAT-08005 263725
550 219780 274725
600 MAT-07997 270380 MAT-08006 337975
650 300080 375100
700 MAT-07998 520080 MAT-08007 650100
750 564080 705100
800 MAT-07999 674080 MAT-08008 842600
850 768680 960850
900 MAT-08000 875380 MAT-08009 1094225
1000 MAT-08001 1425380 MAT-08010 1781725
1100 MAT-08002 1645380 MAT-08011 2056725
1200 MAT-08003 1865380 MAT-08012 2331725
Supply, Delivery of D.I double flanged short/Long body or Wafer Type pattern Butterfly
Valves for the following dia. conforming to IS 13095 (with up to date amendments, if any)
2 manually operated having Body, Disc with D.I; Shaft, Seating ring, internal fastenings with
Stainless steel (IS: 6603); External bolting with Carbon steel; Seat with Nitrite or EPDM
rubber; excluding transportation and all taxes, complete.
DIA. IN MM Code PN 2.5 (MPa) (Rate/Each)

50 MAT-08013 14080
100 MAT-08014 16280

97
 150 MAT-08015 23980
200 MAT-08016 43780
250 MAT-08017 49280
300 MAT-08018 56980
350 MAT-08019 69080
400 MAT-08020 100980
450 MAT-08021 132880
500 MAT-08022 190080
550 MAT-08023 210980
600 MAT-08024 234080
650 MAT-08025 270380
700 MAT-08026 328680
750 MAT-08027 344080
800 MAT-08028 369380
850 MAT-08029 388080
900 MAT-08030 438680
1000 MAT-08031 564080
1100 MAT-08032 674080
1200 MAT-08033 894080

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return
Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date,
if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door
3 suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing
bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon
steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes
complete.
PN 1.0 (MPa) PN 1.6 (MPa)
DIA. IN MM Code Rate/Each Code Rate/Each
50 MAT-08034 10780 MAT-08046 13475
100 MAT-08035 15180 MAT-08047 18975
150 MAT-08036 21780 MAT-08048 27225
200 MAT-08037 29480 MAT-08049 36850
250 MAT-08038 40480 MAT-08050 50600
300 MAT-08039 62480 MAT-08051 78100
350 MAT-08040 74580 MAT-08052 93225
400 MAT-08041 89980 MAT-08053 112475
450 MAT-08042 116380 MAT-08054 145475
500 MAT-08043 192280 MAT-08055 240350
550 MAT-08044 212080 MAT-08056 265100
600 MAT-08045 256080 MAT-08057 320100

98
 Conveyance of valves and 5% on basic cost of valves
accessories including
4 loading at factory and
unloading, stacking at site
of work.

99
 30. S o R FOR VALVES FOR HEAVY USUAGE in WTPS, STPS, PUMP HOUSES,
PUMPING MAINS & ELSRS 2024-25.

Sl.
Descripti
No
on
. TEST PRESSURE
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves)
with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or
Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade
quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with
3-O ring protection system on the Shaft and Seals of NBR. The Valves should be
1
Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type
A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating
both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight
through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type
A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.
DIA. IN PN 1.0 (MPa) PN 1.6 (MPa) PN 2.5 (MPa)
MM
A)
Rate/Eac Rate/E
Without Code Code Code Rate/Each
h ach
By-Pass
MAT- 7669 MAT-08067 7669 MAT-08076 13865
50 08058
MAT- 9922 MAT-08068 9922 MAT-08077 17094
80 08059
MAT- 11880 MAT-08069 12957 MAT-08078 19381
100 08060
MAT- 18480 MAT-08070 20401 MAT-08079 32327
150 08061
MAT- 23980 MAT-08071 29975 MAT-08080 54524
200 08062
MAT- 30580 MAT-08072 38225 MAT-08081 80987
250 08063
MAT- 56980 MAT-08073 70965 MAT-08082 131363
300 08064
MAT- 78980 MAT-08074 98725 MAT-08083 384409
350 08065
MAT- 100980 MAT-08075 126225 MAT-08084 390996
400 08066
B) With
By-Pass
450 165880 207350
500 212080 265100
550 234080 292600
600 300080 375100
650 344080 430100
700 432080 540100

100
 Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves
with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-
500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder
Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All
2
internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS
AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR
and generally conforming to DIN/BIS/AWWA standards (or) combination Flange
drilling as per IS - 1538 and exclusive of all taxes and transportation.
PN 1.0 PN 1.6
DIA. IN (MPa) (MPa) PN 2.5 (MPa)
Code Code Code
MM Rate/Eac Rate/E Rate/Each
h ach
MAT- 4180 MAT-08093 5225
25 08085
MAT- 7480 MAT-08094 9350 MAT-08101 53890
40 08086
MAT- 10780 MAT-08095 13475 MAT-08102 44092
50 08087
MAT- 18480 MAT-08096 23100 MAT-08103 45715
80 08088
MAT- 23980 MAT-08097 29975 MAT-08104 61378
100 08089
MAT- 45980 MAT-08098 57475 MAT-08105 74257
150 08090
MAT- 66538 MAT-08099 66538 MAT-08106 82766
200 08091
MAT- 108680 MAT-08100 111150
300 08092
Manufacture, Supply and delivery of DI D/F Tilting disc Swing Check Valves Slanted
seated with maximum swing of 59 degree with metallic, corrosion proof and wear
resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-
50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Shafts of stainless steel, shaft
bearing of zinc free bronze and Integral body seat face & disc face with nickel-
3
chromium overlay welding and micro finished. All the inside and outside of the body is
to be coated with double coating of food grade epoxy liquid lacquer (EP-F) with
minimum thickness of 150 microns, color: RAL 5005 Blue face to face dimensions
according to EN 558-1/14/DIN 3202-F4, Flange dimensions according to EN1092-2/IS
1538
DIA. IN
PN 1.0 (MPa) PN 1.6 (MPa) PN 2.5 (MPa)
MM
a)Withou Rate/Eac Rate/Eac
Code Code Code Rate/Each
t By-Pass h h
MAT- 11880 MAT- 14850 MAT-08139 23760
80 08107 08123
MAT- 16280 MAT- 20350 MAT-08140 32560
100 08108 08124
MAT- 21780 MAT- 27225 MAT-08141 43560
150 08109 08125
MAT- 27280 MAT- 34100 MAT-08142 54560
200 08110 08126
MAT- 39380 MAT- 49225 MAT-08143 78760
250 08111 08127

101
 MAT- 56980 MAT- 71225 MAT-08144 113960
300 08112 08128
b)With
By-Pass
MAT- 67980 MAT- 84975 MAT-08145 135960
350 08113 08129
MAT- 104280 MAT- 130350 MAT-08146 208560
400 08114 08130
MAT- 135080 MAT- 168850 MAT-08147 270160
450 08115 08131
MAT- 149380 MAT- 186725 MAT-08148 298760
500 08116 08132
MAT- 168080 MAT- 210100 MAT-08149 336160
550 08117 08133
MAT- 206580 MAT- 258225 MAT-08150 413160
600 08118 08134
MAT- 248380 MAT- 310475 MAT-08151 496760
650 08119 08135
MAT- 303380 MAT- 377520 MAT-08152 606760
700 08120 08136
MAT- 328680 MAT- 410850 657360
750 08121 08137
MAT- 369380 MAT- 461725 738760
800 08122 08138
850 388080 485100 776160
900 438680 548350 877360
1000 548680 685850 1097360
1100 850850 935935
1200 1100000 1210000
Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of
Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per
IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the
disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded)
micro finished, 100 % leak tight in both directions, Medium free bearings and with
4 minimum thickness of 250 microns Fusion bonded food grade epoxy coating and
1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns
applied on both body and disc inside and outside. Face to face dimensions as per
EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163
Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried
application.
PN 4.0
DIA. IN PN 1.0 PN 1.6 PN 2.5
Code Code Code (MPa)
MM (MPa) (MPa) (MPa)
Code
MAT- 19580 MAT- 24475 MAT- 39160 MAT- 146478
150 08153 08173 08193 08213
MAT- 27280 MAT- 34100 MAT- 54560 MAT- 178108
200 08154 08174 08194 08214
MAT- 38280 MAT- 47850 MAT- 76560 MAT- 249581
250 08155 08175 08195 08215
MAT- 47080 MAT- 58850 MAT- 94160 MAT- 262068
300 08156 08176 08196 08216
350 MAT- 65780 MAT- 82225 MAT- 131560 MAT- 285236

102
 08157 08177 08197 08217
MAT- 87780 MAT- 109725 MAT- 175560 MAT- 436082
400 08158 08178 08198 08218
MAT- 98780 MAT- 123475 MAT- 197560 -
450 08159 08179 08199
MAT- 127380 MAT- 159225 MAT- 254760 MAT- 538878
500 08160 08180 08200 08219
550 149380 186725 298760
MAT- 168080 MAT- 210100 MAT- 336160 MAT- 590468
600 08161 08181 08201 08220
650 190080 237600 380160
MAT- 218680 MAT- 273350 MAT- 437360
700 08162 08182 08202
750 248380 310475 496760
800 MAT- 279180 MAT- 348975 MAT- 558360
08163 08183 08203
850 300080 375100 600160
900 MAT- 328680 MAT- 410850 MAT- 657360
08164 08184 08204
1000 MAT- 454080 MAT- 567600 MAT- 908160
08165 08185 08205
1100 MAT- 674080 MAT- 842600 MAT- 1348160
08166 08186 08206
1200 MAT- 784080 MAT- 980100 MAT- 1568160
08167 08187 08207
1300 1004080 1255100 2008160
MAT- 1098680 MAT- 1373350 MAT- 2197360
1400 08168 08188 08208
1500 1379180 1723975 2758360
MAT- 1367080 MAT- 1708850 MAT- 2734160
1600 08169 08189 08209
1700 1928080 2410100 3856160
MAT- 2116180 MAT- 2645225 MAT- 4232360
1800 08170 08190 08210
1900 2399980 2999975 4799960
MAT- 2547380 MAT- 3184225 MAT- 5094760
2000 08171 08191 08211
2100 2662880 3328600 5325760
MAT- 2838880 MAT- 3548600 MAT- 5677760
2200 08172 08192 08212
Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body
and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as
per IS1865, IS:3896-2 with fully encapsulated in Vulcanized EPDM rubber & Fusion
bonded Electro Static epoxy powder coating inside and outside color Blue RAL 5005
5
with Min. Coating thickness of 250 microns. The EPDM rubber & Epoxy rubber &
Epoxy powder should conform to W 270 standards (Drinking water application) and
face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange
connections as per IS:1538 excluding all duties, taxes and transportation.
DIA. IN
PN 1.0 (MPa) PN 1.6 (MPa) PN 2.5 (MPa)
MM
a)Withou Code Rate/Eac Code Rate/Eac Code Rate/Each

103
 t By-Pass h h
80 13514 14865
100 18480 23100
150 27280 34100
200 32780 40975 167578
250 43780 54725 203526
300 54780 68475 247771
b)With
By-Pass
350 78980 98725
400 96580 120725
450 107580 134475
500 149380 186725
550 182380 227975
600 218680 273350

NOTE:-1) All the prices are ex-go down /ex-factory. Packaging and Transportation extra at
5% on basic cost. The grade of DI & conformation to specifications shall be certified by a
third party Quality Control Agency approved by indenting authority at the cost of supplier.

104
31. S o R FOR SFRC MAN-HOLE FRAME WITH COVERS FOR THE YEAR 2024-
25.

Sl. No. Description Unit Code Rate

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers
I and frames with ISI marking anywhere in A.P., F.O.R. destination including,
loading, un-loading & stacking at site but excluding all taxes.
a) M.D. -10 with 500mm dia. Clear opening Each MAT-08221 1543.00
b) H.D.-20 with 500mm dia. Clear opening Each MAT-08222 1989.00
H.D.-10with 560mmdia. clear opening(New Each MAT-08223
C) 1560.00
item)
d) H.D.-20 with 560mm dia. Clear opening Each MAT-08224 2133.00
e) E.H.D.-35 with 560mm dia. Clear opening. Each MAT-08225 2286.00
f) 24x24 MD 10 Each MAT-08226 1682.00
g) 24x18 MD 10 Each MAT-08227 1548.00
h) 24x24 HD 20 Each MAT-08228 1890.00
i) 24x18 HD 20 Each MAT-08229 1927.00
j) Dividers 0.9 Mtr. Each MAT-08230 3957.00

Manufacture as per company’s standard

specification supply and delivery of
encapsulated plastic steps for man holes
MAT-08231
II anywhere in A.P. including cost of materials Each 166.00
packing as per company’s standards, loading,
transportation, unloading and stacking at site
of work etc, complete but excluding all taxes.

105
 32. S o R FOR CI and M.S. DISMANTLING JOINTS FOR THE YEAR 2024-25

Sl.No. Description Unit Code Rate

Manufacture, Supply and Delivery of C.I Dismantling Joints with both side flange
1 end suitable for installation in between flange end pipes. These rates are excluding
all taxes.
Nominal Dia. In MM
50 Each MAT-08232 4826
80 Each MAT-08233 5282
100 Each MAT-08234 6900
125 Each MAT-08235 8800
150 Each MAT-08236 9777
200 Each MAT-08237 13864
250 Each MAT-08238 16504
300 Each MAT-08239 26409
Manufacture, Supply and Delivery of M.S. Dismantling Joints with both side flange
2 end suitable for installation in between flange end pipes. Thickness as per IS: 7322.
These rates are excluding all taxes.
Nominal Dia. In MM
350 Each MAT-08240 59,785
400 Each MAT-08241 68,507
450 Each MAT-08242 74,325
500 Each MAT-08243 88,959
600 Each MAT-08244 1,03,515
700 Each MAT-08245 1,15,161
750 Each MAT-08246 1,18,075
800 Each MAT-08247 1,41,365
900 Each MAT-08248 1,47,482
1000 Each MAT-08249 1,76,660
1100 Each MAT-08250 1,91,245
1200 Each MAT-08251 2,20,420
1300 Each MAT-08252 2,49,592
1400 Each MAT-08253 2,79,334
1600 Each MAT-08254 3,08,566
1800 Each MAT-08255 3,65,405
2000 Each MAT-08256 4,54,730
Conveyance of joints and accessories including 5% on basic cost
3 loading at factory and unloading, stacking at site of
work.

106
 33. OTHER ITEMS FOR THE YEAR 2024-25

Sl.
Description Unit Code Rate
No.

1 2 3 4 5
SUPPLY AND DELIVERY OF PIG LEAD MAT-08257
99.99 % PURE INCLUDING CONVEYANCE
1 Per Kg 316
ETC., COMPLETE, BUT EXCLUDING
TAXES.
SUPPLY AND DELIVERY OF LEAD WOOL MAT-08258
BEST QUALITY INCLUDING
2 Per Kg 286
CONVEYANCE ETC., COMPLETE, BUT
EXCLUDING TAXES.
SUPPLY AND DELIVERY OF SPUN YARN MAT-08259
OF BEST QUALITY INCLUDING
3 Per Kg 128
CONVEYANCE ETC., COMPLETE, BUT
EXCLUDING TAXES.
SUPPLY AND DELIVERY OF RUBBER
PACKING INCLUDING CONVEYANCE
4
ETC., COMPLETE, BUT EXCLUDING
TAXES.
a) 3 mm thick Per Kg MAT-08260 102
b) 6 mm thick Per Kg MAT-08261 102
SUPPLY AND DELIVERY OF BOLTS AND MAT-08262
NUTS WITH DOUBLE WASHERS
5 INCLUDING CONVEYANCE ETC., Per Kg 122
COMPLETE, BUT EXCLUDING TAXES.
(1/2" TO 1")

107
 34. S o R FOR TRENCH LESS TECHNOLOGY WITH PIPE JACKING METHOD
FOR THE YEAR 2024-25

Sl.
Description Unit Code Rate
No.

Railway crossing/Road crossing/Canal crossing by adopting trenchless technology

tunneling work through specialized pipe jacking method by erecting the equipment to true
to the alignment and gradient, by hydraulic pipe jacking technique complete including
1 tunneling, excavation in all types of soils including hard rock and construction of RCC
chambers suitable to casing pipe pits, and conveyance charges of machinery and other
required materials but excluding cost of encasing pipe, in co-ordination with the concerned
authorities as per approved drawings and directed by the Engineer-in –Charge.
800 mm dia. Rmt MAT-08263 27300.00
900 mm dia. Rmt MAT-08264 28665.00
1000 mm dia. Rmt MAT-08265 30030.00
1100 mm dia. Rmt MAT-08266 31395.00
1200 mm dia. Rmt MAT-08267 32760.00
1300 mm dia. Rmt MAT-08268 34125.00
1400mm dia. Rmt MAT-08269 36855.00
1500 mm dia. Rmt MAT-08270 40950.00

108
 35.SOR FORHOUSE SERVICE CONNECTIONSFOR THE YEAR 2024-25

Sl. Description Unit Code Rate

No.
1 House service connections (Compression Fittings)
Supply and Fixing of compression fittings shall comply with ISO 17885 2015, PN-16 rating
and manufactured from virgin resin of PE-80 having blue color. Raw material must be WRAS
approved as per BS 6920 for effect on water quality intended for human consumption.
Compression fittings should have moulded in SS 304 threaded insert outlet with thread
dimension confirming to IS 554/ISO 7. The cost shall include testing of all materials, labor,
inspection charges, transportation up to site, transit insurance, loading, unloading, stacking
and fixing etc, complete as specified and directed by the departmental Engineer in charge, but
excluding all taxes.
Compression male/female threaded adaptor with Each MAT-08296 103.00
SS insert D20 mm X 1/2 "
Compression male/female threaded adaptor with Each MAT-08297 137.00
SS insert D25 mm X 3/4 "
Compression male/female threaded adaptor with Each MAT-08298 191.00
SS insert D32 mm X 1 "
Compression male/female threaded elbow with Each MAT-08299 106.00
SS insert D20 mm X 1/2 "
Compression male/female threaded elbow with Each MAT-08300 143.00
SS insert D25 mm X 3/4 "
Compression male/female threaded elbow with Each MAT-08301 198.00
SS insert D32 mm X 1 "
Double Compression elbow 20 mm 64 Each MAT-08302 48.00
Double Compression elbow 25 mm 79 Each MAT-08303 66.00
Double Compression elbow 32 mm Each MAT-08304 94.00
2 House service connections (Composite strap saddle for DI/CI pipes)
Supply and fixing of composite strap saddle shall be of wrap around design pN-16 rating.
Body shall be manufactured using virgin compounded PE 80/PE 100 polymer with stainless
steel 304 grade stirrup plate mounted with PE straps (Engineering Plastic) with Nut bolt joint,
sealing between the saddle and mains shall be obtained by using an elastomer seal
(Underneath projection for self interlocking). The cost shall include testing of all materials,
labor, inspection charges, transportation up to site, transit insurance, loading, unloading,
stacking and fixing etc, complete as specified and directed by the departmental Engineer in
charge, but excluding all taxes.
(Main pipe outer diameter in mm & tapping size
in inches)
100 x 1/2" Each 450.00
100 x 3/4" Each 502.00
100 x 1" Each 535.00
150 x 1/2" Each MAT-08305 470.00
150 x 3/4" Each MAT-08306 522.00
150 x 1" Each MAT-08307 555.00
200 x 1/2" Each MAT-08308 490.00
200 x 3/4" Each MAT-08309 542.00

109
 200 x 1" Each MAT-08310 575.00
3 House service connections (Regulating brass ferrule)
The Ferrule of pressure rating PN 10. The cost shall include testing of all materials, labor,
inspection charges, transportation up to site, transit insurance, loading, unloading, stacking
and fixing etc., complete as specified and directed by the departmental Engineer in charge,
but excluding all taxes.

1/2" Each MAT-08311 146.00

3/4" Each MAT-08312 239.00
1" Each MAT-08313 416.00
4 House service connections (PP Saddle)PP
Clamp saddles-PP clamp Saddles shall be
manufactured by injection moulding using
virgin polypropylene. Mechanical tapping
saddles for water works purposes and
designed for use with PVC/PE pipe as per IS
4985/IS 4984 respectively. These saddles
should be contoured to fit around the pipe. PP
saddles shall be Blue/Black moulded-in with
Nickel plated Brass / SS 304 metal female
threaded outlets. Seal shall be thermoplastic
elastomer rubber suitable for drinking water
and nut-bolt-washer with SS. The PP Clamp
saddle fittings shall be mouldedwith SS
304/Nickel plated Brass female threaded outlet
inserted to connect necessary fittings. Thread
dimension shall conform to IS-554/ISO-7.
Adequate thickness of PP shall be provided to
hold brass insert in place and avoid leakage
while pressure applications. Fasteners shall be
threaded type, with SS. Fasteners of size
125mm and above. The grade of raw material
used must be certified by WRAS, UK for type
test as per BS 6920 from their certified
laboratories like NSF International Ltd. UK
and certificate of Compliance to be produced
for the following parameters: i)
Odour&Flavour of water ii) Appearance of
water iii) Growth of Micro Organism iv)
Extraction of Substances that may be of
concern to public health (Cyto toxicity) v)
Extraction of Metals excluding all taxes.
(Main pipe outer diameter in mm & tapping size
in inches)
63x1/2" Each MAT-08314 127.00
63x3/4" Each MAT-08315 127.00
63x1" Each MAT-08316 127.00
75x1/2" Each MAT-08317 148.00
75x3/4" Each MAT-08318 148.00

110
 75x1" Each MAT-08319 148.00
90x1/2" Each MAT-08320 169.00
90x3/4" Each MAT-08321 169.00
90x1" Each MAT-08322 169.00
110x1/2" Each MAT-08323 203.00
110x3/4" Each MAT-08324 203.00
110x1" Each MAT-08325 203.00
125x1/2" Each MAT-08326 242.00
125x3/4" Each MAT-08327 242.00
125x1" Each MAT-08328 242.00
140x1/2" Each MAT-08329 288.00
140x3/4" Each MAT-08330 288.00
140x1" Each MAT-08331 288.00
160x1/2" Each MAT-08332 344.00
160x3/4" Each MAT-08333 353.00
160x1" Each MAT-08334 353.00
180x1/2" Each MAT-08335 359.00
180x3/4" Each MAT-08336 449.00
180x1" Each MAT-08337 499.00
200x1/2" Each MAT-08338 379.00
200x3/4" Each MAT-08339 469.00
200x1" Each MAT-08340 519.00
5 Supply and Fixing of Meter Box / Valve box is
recommended to encompass & protect Water
meters/valves installed on drinking water supply
pipes. Meter Box manufacturers must have ISO
9001, ISO 14001 and ISO 18001 certification for
their QMS, EMS & OHSAS systems. Meter Box
should be of two components, comprising body
and lid. Provision for embossed marking on the
lid as per customer requirement, Nominal Size of
box should be 8” X 12” with Rectangular shape
,Minimum Dimensions: Length 355mm x height
180mm x width 270mm,Locking: with Built in
lock.
METER BOX 8X12 WITH BUILT IN LOCK, Each 300

111
 36. SoR FOR ARC WELDED M.S PIPEFOR THE YEAR 2024-25

Manufacture, supply and delivery of submerged ARC welded M.S Pipe having beveled
ends from plate or coil conforming to IS-3589 and/or IS-5504 with its latest revision /
amendment with inside 406 micron thick food grade epoxy coating and outside 3LPE
coating conforming to DIN 30670 / Polyolefin Tape coating conforming to AWWA C214
for the specified thickness & inner diameter of pipe, external field joint coating with
polyolefin backing and internal field joint coating with chemically cured 2 part epoxy
based solvent free liquid coating material for Drinking Water NSF approved etc.,
complete including all labour, materials and ROU/ROW as per specification and to the
satisfaction of Engineer-in-charge excluding transportation and GST.
Inner Outer Thickness Code MS Pipe Code MS Pipe
Diameter Diameter (mm) Rate with Rate with
(mm) (mm) Internal Internal
406 micron 406 micron
thick food thick food
grade grade
epoxy epoxy
coating and coating and
3LPE Polyolefin
coating Tape
conforming coating
to DIN conforming
30670 to AWWA
C214
500 510 5 MAT- 5723 MAT- 5634
08344 08408
500 511.20 5.60 MAT- 6165 MAT- 6084
08345 08409
500 512.60 6.30 MAT- 6681 MAT- 6600
08346 08410
500 522 11 MAT- 10186 MAT- 10104
08347 08411
600 611.60 5.80 MAT- 7558 MAT- 7462
08348 08412
600 612.60 6.30 MAT- 7998 MAT- 7902
08349 08413
600 625 12.50 MAT- 13522 MAT- 13424
08350 08414
700 712.60 6.30 MAT- 9285 MAT- 9204
08351 08415
700 714.20 7.10 MAT- 10101 MAT- 10024
08352 08416
700 728.40 14.20 MAT- 17422 MAT- 17390
08353 08417
800 814.20 7.10 MAT- 11526 MAT- 11440
08354 08418
800 816 8 MAT- 12573 MAT- 12494
08355 08419
800 836 18 MAT- 24369 MAT- 24365
08356 08420
900 916 8 MAT- 14125 MAT- 14040
08357 08421

112
900 917.60 8.80 MAT- 15172 MAT- 15093
08358 08422
900 920 10 MAT- 16745 MAT- 16677
08359 08423
900 935 17.50 MAT- 26672 MAT- 26669
08360 08424
1000 1017.60 8.8 MAT- 16837 MAT- 16752
08361 08425
1000 1020 10 MAT- 18581 MAT- 18508
08362 08426
1000 1040 20 MAT- 33269 MAT- 33296
08363 08427
1050 1067.60 8.80 MAT- 17670 MAT- 17583
08364 08428
1050 1070 10 MAT- 19499 MAT- 19423
08365 08429
1050 1072 11 MAT- 21026 MAT- 20961
08366 08430
1100 1117.6 8.8 MAT- 18587 MAT- 18412
08367 08431
1100 1120 10 MAT- 20515 MAT- 20339
08368 08432
1100 1122 11 MAT- 22124 MAT- 21947
08369 08433
1200 1220 10 MAT- 22362 MAT- 22170
08370 08434
1200 1222 11 MAT- 24114 MAT- 23922
08371 08435
1200 1225 12.50 MAT- 26748 MAT- 26556
08372 08436
1300 1325 12.50 MAT- 28952 MAT- 28744
08373 08437
1300 1328.40 14.20 MAT- 32189 MAT- 31980
08374 08438
1400 1425 12.50 MAT- 31155 MAT- 30931
08375 08439
1400 1428.40 14.20 MAT- 34634 MAT- 34410
08376 08440
1500 1528.40 14.20 MAT- 37082 MAT- 36841
08377 08441
1500 1532 16 MAT- 41031 MAT- 40792
08378 08442
1600 1628.40 14.20 MAT- 39528 MAT- 39274
08379 08443
1600 1632 16 MAT- 43733 MAT- 43480
08380 08444
1700 1728.40 14.20 MAT- 41973 MAT- 41705
08381 08445
1700 1732 16 MAT- 46435 MAT- 46169
08382 08446
1700 1735 17.50 MAT- 50160 MAT- 49898
08383 08447
1800 1828.40 14.20 MAT- 44419 MAT- 44137
08384 08448
1800 1832 16 MAT- 49137 MAT- 48859

113
 08385 08449
1800 1835 17.50 MAT- 53077 MAT- 52801
08386 08450
1900 1932 16 MAT- 51839 MAT- 51548
08387 08451
1900 1935 17.50 MAT- 55993 MAT- 55704
08388 08452
1900 1940 20 MAT- 62930 MAT- 62646
08389 08453
2000 2032 16 MAT- 54542 MAT- 54236
08390 08454
2000 2035 17.50 MAT- 58909 MAT- 58608
08391 08455
2000 2040 20 MAT- 66203 MAT- 65907
08392 08456
2100 2135 16 MAT- 61826 MAT- 61512
08393 08457
2100 2140 17.50 MAT- 69476 MAT- 69169
08394 08458
2100 2144.40 20 MAT- 76224 MAT- 75921
08395 08459
2200 2235 17.50 MAT- 64742 MAT- 64415
08396 08460
2200 2240 20 MAT- 72750 MAT- 72429
08397 08461
2200 2244.40 22.20 MAT- 79811 MAT- 79498
08398 08462
2300 2340 20 MAT- 76023 MAT- 75691
08399 08463
2300 2344.40 22.20 MAT- 83399 MAT- 83074
08400 08464
2300 2350 25 MAT- 92806 MAT- 92489
08401 08465
2400 2440 20 MAT- 79296 MAT- 78951
08402 08466
2400 2444.40 22.20 MAT- 86986 MAT- 86648
08403 08467
2400 2450 25 MAT- 96793 MAT- 96465
08404 08468
2500 2540 20 MAT- 82569 MAT- 82213
08405 08469
2500 2544.40 22.20 MAT- 90573 MAT- 90224
08406 08470
2500 2550 25 MAT- 100780 MAT- 100441
08407 08471

114
 37. SoR FOR HDPE ELECTRICAL PIPE CONDUITS FOR THE YEAR 2024-25
Supply of the HDPE Electrical pipe conduits with permanent Lubricant inner layer
with ribs , dimensional ratio of 13.5, deflection not greater than 5% when exposed to
the normal operating temperature 90 degrees centigrade under the overburden soil
pressure and other physical properties confirming to ASTMF 2160 and / or NEMA
TC 7 ( The expected service life of HDPE Pipe conduit and accessories shall not be
less than 50 years) including transportation and excluding GST
Diameter Code Rate per Rmt
160 mm MAT-08472 1221
200 mm MAT-08473 1981
225mm MAT-08474 2902
7 way ( Multi duct for ICT) MAT-08475 955

115
 38. SoR FOR BORE WELL DRILLING RATES FOR THE YEAR 2024-25

S.No Type of Bore Well Rate in Rs.

1 Drilling of Bore well with DTH Rig per RM

Drilling of Bore well by down the hole hammer drilling to a finished dia
of 112/165 mm dia in all formations suitable for down the hole hammer
drilling such as medium hard rock formation to hard rock formation, all
consolidated formation etc. and drilling in over burden to dia not less
than 200 mm etc and reaming the bore well to suit insertion of suitable
casing pipe etc., including insertion of casing pipe with couplings, caps
any other relevant materials upto required depth as directed by the
department including transportation of drilling rigs and supporting
vehicle and including bore development (Flushing of Bore Well at an
average pressure of 150 PSI) conducting yield test, consumables
charges, Crew charges required in fixation of pipe assembly completely
done to the satisfaction of the department and including all labour
charges but excluding all taxes, the cost of casing pipe, couplings, cap
etc., The entire work should be carried out as per IS -2800 Part I & II
1979 and amended from time to time.
Drilling of Bore well 112 mm dia. up to 150.00 m depth 383.89
Drilling of Bore well 112 mm dia. beyond 150.00 m depth 438.02
Drilling of Bore well 112 mm dia for Agency area 10% over plain
area rates.
Drilling of Bore well 165 mm dia. up to 90.00 m depth 492.16
Drilling of Bore well 165 mm dia. above 90.00 m up to 150.00 m depth 526.55
Drilling of Bore well 165 mm dia. above 150.00 m up to 250.00 m depth 590.61
Drilling of Bore well 165 mm dia. above 250.00 m to 350.00 m depth 718.50
Drilling of Bore well 165 mm dia. beyond 350.00 m depth 777.60
Drilling of Bore well 165 mm dia for Agency area 10% over plain
area rates.
2 Drilling of Bore well with Rotary Rig per RM
Drilling of Bore hole (which may be carried out by pilot bore hole) to a
finished dia of 200/225/300 /350/450 mm hole (for insertion of
110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing
pipe) by Rotary drilling rig in all formations suitable for Rotary drilling
such as alluvium, Loamy, clayey, sandy, burried channels, highly
disturbed and bouldary zones high sheared and fractured zones followed
by jointed to massive soft, medium rock, all formations typical and
suitable for rotary drilling etc. including insertion of casing pipe ,
couplings, cap, plug fixation, and including filling the peripheral gap
with rebullied pebbled gravel packing, bore development, conducting
yield test, and all other required in the fixation of pipes assembly etc.
but excluding the cost of casing pipe, couplings, dummys, clamps etc.,
as recommended by the departmental Geologist. The bore should be
developed with compressor air until clear water free from sand and other
materials continuously discharged. The size of gravel used for gravel
packing should be as per ISI specification used for rotary tube well. The

116
 pebbled gravel packing should be carried out in such a way that the
theoritical quantity consumed completely.
The entire work to be carried out as per I.S. 2800 Part - I & II of 1979
and including cost of all materials and all labour charges and excluding
all taxes etc.,
Drilling of Bore well of 200/225/300 mm dia for insertion of pipe dia of 1102.50
100/125 mm
Drilling of Bore well 350/450mm dia for insertion of pipe dia of 1427.30
160/175/200 mm
Drilling of Bore wells for Agency area 10% over plain
area rates.
3 Drilling of Bore Wells with Hand Bore Set per RM
Drilling of Bore well with Hand Bore set to a finished dia of
112/165/175/180 mm justify both sides in all kinds of formations
suitable for hand bore set drilling such as black cotton soils, sandy and
alluvial soils and insertion of PVC/PVC blue casing pipe with couplings
including slotting of pipe where ever required and fixing of bore well
with cap and bail plug as per directions of the department for a finished
item of work including conducting yield test, crew charges, cost of
consumables, transportation charges and bore development charges and
all other charges required in fixation of pipe assembly, Flushing of bore
with required pressure excluding cost of all required materials such as
cap, bail plug, clamp sets, bolts and nuts etc., excluding all taxes , cost
of PVC casing pipe, slotting charges.
Drilling of Bore well of finished dia of 112 mm 442.88
Drilling of Bore well of finished dia of 112 mm for Agency 10% over plain
area rates.
Drilling of Bore well of finished dia of 165/175/180 mm 634.93
Drilling of Bore well of finished dla of 165/175/180 mm for Agency 10% over plain
area area rates.
4 Construction of bore well platform
Construction of bore well platform of 1.85 m dia and 3.00 m length
drain and foot rest of 1.00 x LOU m with CC (1:2:4) using20 mm H8G
metal including cost and conveyance of all materials labour charges,
centering, curing, seigniorage charges &excluding taxes etc., complete
as per UNICEF type design.
For Plain Areas per 1No 9702.00
For Agency Areas per 1No 10% over plain
area rates.
5 Flushing of bore well
Flushing of bore well of dia 165/150 mm with power rig at an average
pressure of 150 PSI, including crew charges, completely done to the
satisfaction of the department including detachable of all accessories
and refix all materials as per the original condition including all labour
charges, but excluding cost of materials& excluding taxes etc,,
complete,
for 112 mm dia Bore wells per 1 Job 8820.00
for 165/150 mm dia Bore wells per 1 Job 10473.75
For Agency Areas 10% over plain

117
 area rates.
6 Deepening of existing bore wells
Deepening of existing bore wells of dia 165/150mm by using DTH rig
including flushing the bore well, conducting yield test etc. excluding
taxes.
for depth up to 150 mm per RM 578.81
for depth from 150 mm to 250mm per RM 661.50
for depth from 250 mm to 350mm per RM 804.82
above 350 mm depth per RM 870.97
7 Supply, Delivery of ISI marked fully hot dipped galvanized
deepwellInida Mark-H Hand Pump assembly complete unit with 10 Nos
of connecting rods (bright bar of 12mm dia and 100 mts length each
confirming to IS 9301/1990 & IS 14101 to14104:1994 with their
amendments / revisions but excluding taxes.
Indian Mark -II Hand Pump Assembly Set 12017.25
8 Labour charges for erection of IM-II Hand Pump Assembly with all
its accessories and with the required number of 32mmdia CI-13 GI pipes
including all taxes and as per the directions ofthe department officers
but excluding taxes.
For Plain area 1102.50
For Agency area 10% over plain
area rates.
9 Casing Pipes and Bore caps excluding taxes
Cost and supply of 175 mm dia PVC blue casing pipe per RN3 1178.10
Slotting charges for 175 mm dia PVC blue casing pipe per RM 385.87
180 mm dia PVC Casing pipe perforation charges per RM 358.31
175 mm dia MS Casing pipe perforation charges per RM 435.49
Supply & Fixing of 180 mm dia PVC Bore Cap per 1No 330.75
10 Geological Survey Charges excluding taxes.
for plain area-nob 1323.00
for Agency area-Uob 10% over plain
area rates.
11 32mm dia GI B-Class pipes per RM
for 32mm dia GI B-Class pipes per RM 400

118
39. DOUBLE CHAMBERED RESTRAINED JOINT DI K9 PIPES RATES FOR THE
YEAR 2024-25
Sl.
Description Unit Rate in
No. Rs.
1 2 3 4
Manufacturing, Supply, Delivery of Double chambered
restrained joint DI K9 Pipes confirming to IS 8329
(restrained joints are designed and tested as per ISO
10804) (to be used to for minimum required length as per
design along with double chambered restrained DI
fittings to avoid concrete thrust block at bends) including
rubber gaskets confirming to IS 5382 -1985 /8329-2000
with latest amendments and locking bars & rubber
spacers, conveying to work site, including loading and
unloading at both destinations, excluding cost of specials
and excluding taxes.

1 100 mm Rmt 1732

2 150 mm Rmt 2406
3 200 mm Rmt 3169
4 250 mm Rmt 4143
5 300 mm Rmt 5160
6 350 mm Rmt 6275
7 400 mm Rmt 7927
8 450 mm Rmt 9457
9 500 mm Rmt 11099
10 600 mm Rmt 14595
11 700 mm Rmt 17751
12 750 mm Rmt 19748
13 800 mm Rmt 21482
14 900 mm Rmt 26240
15 1000 mm Rmt 31789
Note: Taxes as applicable shall be added as per rules at the time of preparation of
estimate. Price Variation Formula due to Increase / Decrease in the cost of pig
iron.
P2=P1+ (R2-R1)/1000*M*0.96, Where
M = Weight of pipe in kg per metre as per I.S.8329-1994 & ISO
10804.P2 = Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron(Rs per MT excluding Taxes) at the time of preparation of
estimate.
R1 = Price of Pig Iron (Rs per MT excluding Taxes) at time of preparation of SoR
=Rs.50,000/-

119
40. DOUBLE CHAMBERED RESTRAINED JOINT DI FITTINGS RATES FOR
THE YEAR 2024-25

Sl.
Description Unit Rate in Rs.
No.
1 2 3 4
Manufacture, Supplying and fitting Ductile Iron Double
Chambered Restrained Joint fittings confirming to IS
9523 : 2000 (restrained joints are designed and tested as
per ISO 10804) of Class K-12 (Alternative and to avoid
concrete thrust blocks along with minimum length of
Restrained joint DI pipes at bends) including rubber
gasket confirming to IS 5382 : 1985 and locking bars &
rubber gaskets etc complete but excluding Taxes
Ductile Iron Double Chambered Restrained Joint
fittings
1 Fittings upto 500mm dia Kg 323.00
2 Fittings above 500 mm dia Kg 366.00

Note: Taxes as applicable shall be added as per rules at the time of preparation
of estimate.

120
 41. RATES FOR PVC-O Pipes RATES FOR THE YEAR 2024-25

Manufacture, supply, & delivery of PVC-O Pipes of Class-500 homogenous Spigot high
1. pressure pipes confirming to IS 16647:2017 inclusive cost of EPDM gasket seals on joints,
and transportation anywhere in Andhra Pradesh, excluding GST.
DIA. IN
PN 12.50 PN 16
MM
Rate/Meter Rate/Meter
110 814 969
160 1143 1448
200 1601 1953
250 2163 2588
315 2801 3309
400 4350 5062

Supply and delivery at site of moulded or fabricated OPVC fittings compatible with OPVC
2. pipes confirming to IS 16647-2017 to anywhere in Andhra Pradesh, excluding GST.
ITEM DESCRIPTION Rate Per number (Rs.)
900 DEG ELBOW DN110MM 2894
900 DEG ELBOW DN160MM 3994
900 DEG ELBOW DN200MM 7434
900 DEG ELBOW DN250MM 10468
900 DEG ELBOW DN315MM 16745
900 DEG ELBOW DN400MM 19722
450 DEG ELBOW DN110MM 2227
450 DEG ELBOW DN160MM 3326
450 DEG ELBOW DN200MM 5941
450 DEG ELBOW DN250MM 8210
450 DEG ELBOW DN315MM 11993
450 DEG ELBOW DN400MM 17242
22.50 DEG ELBOW DN110MM 2011
22.50 DEG ELBOW DN160MM 2815
22.50 DEG ELBOW DN200MM 4402
22.50 DEG ELBOW DN250MM 7128
22.50 DEG ELBOW DN315MM 10337
22.50 DEG ELBOW DN400MM 14494
11.250 DEG ELBOW DN110MM 1835
11.250 DEG ELBOW DN160MM 2447
11.250 DEG ELBOW DN200MM 4056
11.250 DEG ELBOW DN250MM 6653
11.250 DEG ELBOW DN315MM 9796
11.250 DEG ELBOW DN400MM 14263

121
SLIDING COUPLER DN110MM 1606
SLIDING COUPLER DN160MM 1858
SLIDING COUPLER DN200MM 2512
SLIDING COUPLER DN250MM 4649
SLIDING COUPLER DN315MM 10199
SLIDING COUPLER DN400MM 17238
110MM FLANGE SOCKET 2016
160MM FLANGE SOCKET 3144
200MM FLANGE SOCKET 4321
250MM FLANGE SOCKET 5707
315MM FLANGE SOCKET 7168
400MM FLANGE SOCKET 11976
AIR TEE 110x40 3300
AIR TEE 160x40 4024
AIR TEE 200x40 5275
AIR TEE 250x40 6539
AIR TEE 315x80 8132
AIR TEE 400x100 13297
REDUCER 110x90 2100
REDUCER 160x110 2816
REDUCER 200x160 4662
REDUCER 250x200 7261
REDUCER 315x250 10410
REDUCER 400x315 15212
110x110 EQUAL TEE 4832
160x160 EQUAL TEE 7464
200x200 EQUAL TEE 10038
250x250 EQUAL TEE 12134
315x315 EQUAL TEE 15619
400x400 EQUAL TEE 20268

122
 42. RATES FOR GI Pipes FOR 2024-25

Manufacture, supply, & delivery of GI Pipes of various sizes and transportation

1. anywhere in Andhra Pradesh, excluding GST.
DIA. IN MM Rate/Meter
15mm GI ‘B’ Class Pipe 178.10
20mm GI ‘B’ Class Pipe 226.50
25mm GI ‘B’ Class Pipe 324.65
32mm GI ‘B’ Class Pipe 403.17
40mm GI ‘B’ Class Pipe 475.65
50mm GI ‘B’ Class Pipe 649.30
65mm GI ‘B’ Class Pipe 818.42
80mm GI ‘B’ Class Pipe 1023.78
100mm GI ‘B’ Class Pipe 1454.13
125mm GI ‘B’ Class Pipe 2000.75
150mm GI ‘B’ Class Pipe 2289.16

Sd/-
Engineer-in-Chief (PH)

//Attested//
AE(T4) DyEE EE DCE

Executive Engineer (PH)

123
GOVERNMENT OF ANDHRA PRADESH

BUILDINGS SoR: 2024-25

SCHEDULE OF RATES
FOR
BUILDINGS WORKS

FOR THE YEAR 2024-25

ALL ENGINEERING
DEPARTMENTS

i
 Office of the Engineer-In-Chief (R&B) Buildings& RSW
Convener-Member,
Committee of Chief Engineers-Buildings-SoR

Procs.No. 20938/SOR/DCE(B)/EE(B)/DEE(B)/AEE/2021, Dt. .06.2024

Sub:- Printing of Buildings-SoR for all the Engineering Departments specific to the
functioning of Building works – Buildings-SoR:2024-25– Communication of
Buildings-SoR – Reg.,

Ref:- 1. G.O.Rt.No.95, T, R&B (R.1) Dept, dt:18.01.2015.

2. Minutes of Committee of Chief Engineers meetings for finalizing the
Building-SoRs held on .06.2024

*****
The Government of Andhra Pradesh have constituted a Committee of Engineer -in-Chiefs
/Chief Engineers of Engineering departments dealing with Building works for finalizing and
communicating Buildings-SoR (Civil & Electrical) vide G.O. 1st cited.

In accordance therewith, the Committee has in their concluding meeting dt: .06.2024
finalized and approved the Buildings-SoR: 2024-25.

The rates for the Building items (Civil, Water Supply & Sanitary and Electrical items) are to
be followed henceforth by all the concerned departments for building works. The rates for Labour,
Common Material & Work items, Public Health items, Conveyance Rates of Materials & Hire
charges are applicable as per approved and published Common SoR-2024-25 .

The Heads of Departments mentioned below are authorized to print the Buildings-SoR:
2024-25. Unauthorized printing & selling of the Buildings-SoR is strictly prohibited.

The Buildings SoR 2024-25 will come into force along with common SoR from the date
decided by the BoCE.

The receipt of the proceedings may please be acknowledged.

Encloseres: Buildings SoR: 2024-25 as above

Sd/- XXXXXXXXXXX .06.2024

Chief Engineer (R&B) Buildings, RSW ,
NABARD, RR,& LWE,
Convener-Member,
Committee of Chief Engineers-Buildings-SoR

To

1) Engineer-In-Chief, Public Health Engineering, Member, Flat No.504 &601, Garuda

Enclave, Tadepalli , Guntur-522501.
2) Engineer-In-Chief,Panchayathraj, Member, Administration, PMGSY,APRRP-
AIIB,VQC,ZP compound, opp PWD Grounds, MG Road, Vijayawada - 520002.
3) Engineer-In-Chief,Tribal Welfare , Member, D.No.40-6-22A, Kandhari Hotel Road,
Adjacent to Southern Spice, Revenue Colony, Vijayawada-520010.

ii
 4) Chief Engineer, A.P. Housing Board, Member,D.No. 5-21, Prasadampadu, Elururoad,
Vijayawada -521108
5) Chief Engineer, A.P.Housing Corporation, S.P’s river view apartments, 2nd floor,
Tadepalli , Amaravati-522501..
6) Chief Engineer, APSRTC,RTC House, 1st Floor of PNBS,Vijayawada.
7) Chief Engineer, A.P. Medical Services and Infrastructure Developmen Corporation,
Member, Autonagar, Mangalagiri, 522503. Andhrapradesh
8) Chief Engineer, Police Housing Corporation, AP, Member, Tadepalli, Vijayawada
9) Chief Engineer (R&B) Electrical, Member, M.G.Road, Vijayawada.
10) Chief Engineer, Civil TTD, Member, Administrative Building, KT Road, Tirupathi,
517501 -AP.
11) Chief Engineer, O/o Vijayawada Municipal Corporation, Canal road, Krishnalanka,
Vijayawada ,520001A.P.

Copy to
1. The Engineer-in-Chief (Admn , ), R&B Department, M.G road, Vijayawada.
2. The Chief Engineer (QC), R&B Department, M.G road , Vijayawada .
3. The Chief Engineer (COT), 76-16-4A/1,1st floor, Iron Yard, Opp. to Ramayalam,
Gollapudi, Vijayawada-520012.
4. The Chief Engineer, APRSCL, D.No.5-21, Hostel Road, Prasadampadu, Vijayawada-
521108.
5. The Chief Engineer, APEWIDC, Door No.9-76 ,Sai fortune Heights , Block A,
Vaddeswaram Village, Guntur District - 522 502.

iii
 INDEX FOR BUILDINGS SoR: 2024-25
(Civil, Water Supply & Sanitary, Electrical and Electro-Mechanical items)

Sl.
DESCRIPTION Page No:
No:

From To

BUILDINGS – SoR:2024-25

Letter Dt. 15.06.2022 for Communication of Buildings SoR 2024-25 ii iii

(Civil, Water Supply & Sanitary, Electrical and Electro-Mechanical
items)
1 Index for Buildings SoR 2024-25 (Civil, Water Supply & Sanitary, 1 5
Electrical and Electro-Mechanical items)

2 Preamble of BuildingsSoR-2024-25(Civil, Water Supply & Sanitary, 6 9

Electrical and Electro-Mechanical items)

3 Building Civil Items - Buildings-SoR-2024-25 10 194

4 Note 195 195

5 Water Supply & Sanitary Items - Buildings-SoR-2024-25 196 244

6 Electrical and Electro-Mechanical Items – Buildings-SoR-2024-25

7 Common SoR- 2024-25 for Labour Rates, Common Material & Work
items, Conveyance Rates of Materials & Hire charges

8 Public Health SoR 2024-25

1
 INDEX FOR BUILIDNG CIVIL ITEMS

Sl. No SECTION DESCRIPTION OF THE ITEM FROM TO

A BRICKS & BUILDING BLOCKS 11 13

SUB-
I ORDINARY CLAY BRICKS
SECTION
SUB-
II FLY-ASH CEMENT/LIME SOLID BLOCKS
SECTION
SUB-
III AUTOCLAVED CONCRETE BLOCKS
SECTION
B NATURAL FLOORING STONES 13 14
SUB- LOCALLY AVAILABLE FLOORING
I
SECTION STONES
SUB-
II NATURAL FLOORING STONES - MARBLE
SECTION
SUB-
III NATURAL FLOORING STONES - GRANITE
SECTION
C WALL & FLOOR TILES 14 20
SUB- NON-PORCELAIN CERAMIC FLOOR
I
SECTION TILES
SUB-
II PORCELAIN VITRIFIED FLOOR TILES
SECTION
SUB-
III CERAMIC WALL TILES
SECTION
SUB-
IV PORCELAIN WALL TILES
SECTION
SUB-
V GLASS MOSAIC TILES
SECTION
SUB-
VI WALL CLADDING TILES
SECTION
SUB-
VII EPOXY FLOORING, COVING
SECTION
D. PAVING & INTERLOCKING TILES 20 23
SUB- TERRAZZO FLOOR TILES (PLAIN
I.
SECTION &CHEQURED)
SUB- CEMENT CONRETE FLOOR TILES (PLAIN
II.
SECTION & CHEQUERED)
SUB- PRE-CAST CONCRETE BLOCKS FOR
III.
SECTION PAVING
SUB-
IV. VINYL FLOORING
SECTION
E. TIMBER & ROOFING MATERIALS 23 24
SUB-
I MEDIUM TEAK WOOD
SECTION
SUB-
II BEST TEAK WOOD
SECTION
SUB-
III BURMA TEAK WOOD
SECTION
SUB-
IV ASSAM TEAK WOOD
SECTION

V SUB- SAL/ COUNTRY WOOD

SECTION
SUB-
VI ROOFING MATERIAL
SECTION

2
 SECTION FROM TO
Sl. No DESCRIPTION OF THE ITEM

25 27
F. STEEL MATERIALS

SUB-
I MILD STEEL MATERIALS
SECTION
SUB-
II GALVANIZED STEEL MATERIALS
SECTION
SUB-
III STAINLESS STEEL MATERIALS
SECTION

G. FIXTURES FOR DOORS & WINDOWS 27 34

SUB-
I TOWER BOLTS
SECTION
SUB-
II HINGES
SECTION
SUB-
III DOOR HANDLES
SECTION
SUB-
IV ALDROPS
SECTION
SUB-
V LATCHES
SECTION
SUB-
VI DOOR CLOSURES
SECTION
SUB-
VII FLOOR SPRINGS
SECTION
SUB-
VIII MORTICE LOCKS
SECTION
SUB-
IX OTHER ACCESSORIES
SECTION

H. CONSTRUCTION CHEMICALS & 34 61

ADMIXTURES
SUB-
I REPAIRING & TREATMENT WORKS
SECTION
SUB-
II INTERGRAL WATERPROOFING
SECTION
COMPOUND
SUB-
III PLASTICIZERS AND WATER REDUCING
SECTION
AGENT
SUB-
IV GROUTS
SECTION
SUB-
V BONDING AGENTS
SECTION
SUB-
VI SEALANTS
SECTION
SUB-
PROTECTIVE WATERPROOF COATINGS /
SECTION
VII CEMENT BASED COATINGS :
SUB-
VIII ANTI CORROSIVE AGENTS
SECTION
SUB-
IX. CURING COMPOUND &MISCELLANEOUS
SECTION
CHEMICALS

3
Sl. No SECTION DESCRIPTION OF THE ITEM FROM TO

I. GLASS MATERIALS 62 63
SUB-
I PLAIN GLASS PANES
SECTION
SUB-
II PIN HEADED GLASS PANES
SECTION

J. PAINTS & POLISHES 63 66

SUB-
I PRIMERS, FILLERS & BASES
SECTION
SUB-
II DISTEMPER PAINTS
SECTION
SUB-
III EMULSION BASED PAINTS
SECTION
SUB-
IV SOLVENT BASED PAINTS
SECTION
SUB-
V OIL BASED ENAMEL PAINTS
SECTION
SUB-
VI TEXTURE PAINTS
SECTION
SUB-
VII SPECIAL PAINTS
SECTION

K. PARTICLE BOARDS 66 71

SUB-
I MELAMINE FACED PLAIN PARTICLE
SECTION
BOARD
SUB-
II INSULATING PARTICLE BOARDS
SECTION
SUB-
III MEDIUM DENSITY FIBRE BOARDS
SECTION
SUB-
IV CEMENT BONDED PARTICLE BOARDS
SECTION

L. PLYWOODS, LAMINATES & VENEERS 71 73

SUB-
I MOISTURE RESISTANT (MR) GRADE
SECTION
SUB-
II BOILING WATER RESISTANT (BWR)
SECTION
GRADE
SUB-
III VENEERED DECORATIVE PLYWOOD
SECTION
SUB-
IV LAMINATES
SECTION
SUB-
V COMMERCIAL VENEERS
SECTION

M. CEILINGS, WALL PARTITIONS &WALL 73 96

LININGS
SUB-
I FALSE CEILINGs - TILES/ SHEETS
SECTION
SUB-
II FALSE CEILINGs - SECTIONS &
SECTION
ACCESSORIES
SUB-
III WALL LINING & PANELLING
SECTION
SUB-
IV PARTITIONS
SECTION
4
Sl. No SECTION DESCRIPTION OF THE ITEM FROM TO

N. DOORS, SHUTTERS & FRAMES 97 135

SUB-
I DOOR FRAMES
SECTION
SUB-
II DOOR SHUTTERS WITHOUT FRAMES
SECTION
SUB-
III DOORS WITH SHUTTERS & FRAMES
SECTION
SUB-
IV CUP-BOARD DOORS
SECTION
P. WINDOWS 136 163
SUB-
I OPENABLE WINDOWS
SECTION
SUB-
II SLIDING WINDOWS
SECTION
SUB-
III VENTILLATORS
SECTION
STRUCTURAL GLAZING & CURTAIN 163 165
Q.
WALLING
SUB-
I FIXED GLAZING
SECTION
SUB-
II STRUCTURAL GLAZING
SECTION
SUB-
III CURTAIN WALLING
SECTION
S. SECTION DISMANTLING 165 166
T. SECTION READY MIX CONCRETE 166 166
U. SECTION EXPANSION JOINT FILLERS 166 166
V. SECTION LABOUR CHARGES 167 172
W. SECTION MISCELLANEOUS ITEMS 172 180
X. SECTION MACHINERY & OTHER HIRE CHARGES 180 182
Y. SECTION POST TENSIONING WORKS 182 182
Z SECTION EXPANSION JOINTS 183 184
ZA SECTION ENERGY EFFICIENT ITEMS
184 189
AB SECTION PEB’s
189 190

CENTERING AND SCAFFOLDING

191 194
CHARGES
NOTE 195 195
LIST OF RECOMMENDED BRANDS/
MANUFACTURERS
WATER SUPPLY AND SANITARY ITEMS 196 244

5
 BUILDINGS SoR: 2024-25
(Civil, Water Supply & Sanitary, Electrical and Electro-Mechanical items)

PREAMBLE
1.0 INTRODUCTION
The Government have issued orders vide. G.O.Rt.No.95, T, R&B (R.1Buildings) Dept.,
dt:18.01.2015 constituting a Committee comprising of Chief Engineers of departments in-
charge of execution of building works for finalization of Schedule of Rates for Buildings
(Civil, Water Supply & Sanitary and Electrical and Electro-Mechanical items). The meeting
of the above “SoR Committee of Chief Engineers for Buildings (Civil, Water Supply &
Sanitary, Electrical and Electro-Mechanical items)” was convened several times during
the year 2024 and finalized on .06.2024 with an objective to finalize and release the
Buildings- SoR: 2024-25.
For Labour Rates the labour commissioner of AP recommendations are taken into
account. BoCE labour rates are refered. For different sections of materials, market rates
are obtained utilizing the services of member departments.
Meetings were conducted with the members of SABCA ( Andhra Pradesh) to receive the
feedback, certain market trends and data on need for updating the SoR rates for the year
2024-25
The market and price indices were found to be volatile and fluctuating. The base prices of
the materials impacted by the variation due to HSD/ Petrol is considered. Similarly, the
impact of international price variations due to recent developments were also considered.
The rates and procedures followed in Telangana SoR 2024-25 and the present rates
taken in the guidance .

2.0 APPLICABILITY OF COMMON SoR – 2024-25

The rates of labour, common materials & work items, Public Health items, conveyance
rates of materials & hire charges approved and published in Common SoR-2024-25
remain applicable. The specifications, stipulations & all other conditions of Common-SoR
other than those specified in this context remain applicable.

3.0 QUOTATION ITEMS

Requests for inclusion of new items have been examined with respect to the market
trends, technological changes, need for use and general practices. For those items
where specific quotations from the manufacturers, suppliers or vendors are received,
lowest quoted rates are considered and specifications were included in Buildings SoR:
2024-25.

4.0 OVERHEADS & CONTRACTORS PROFIT

a. The provision of ‘Over Heads and Contractor’s Profit @ 13.615% shall be allowed in
all the data items of the estimates and rates of the finished items in building works
where ‘Contractors All Risk’ policy is dispensed with.
b. It is reiterated that the provision of ‘Over Heads and Contractor’s Profit’ is applicable
to Building works since the advent of the AP. Revised standard data-2009, which is
approved by the Government in G.O.Ms.No.49 I&CAD (PW-Reforms) Dept., dated:
02-03-2009 and this component shall be operative on all the data items of the
estimates and rates of the finished items published in Buildings SoR for all original
works and Renovation works subject to the fulfillment of the conditions given
6
 below:
i. Site accommodation, setting up plant, access road, water supply, electricity
and general site arrangements.
ii. Office furniture, equipment and communications.
iii. Expenditure on:
a) Corporate office of contractor.
b) Technical agents for site supervision. (Reimbursement to the technical
agents provision is dispensed with where ‘over heads and contractor’s
profit’ provision is included in the data rates)
c) Documentation and “as built” drawings.
d) Mobilization/ de-mobilization of resources.
e) Labour camps with minimum amenities and transportation to work
sites.
f) Light vehicles for site supervision including administrative and
managerial requirements.
g) Laboratory equipment and quality control including field and laboratory
testing. (For all the works costing more than Rs.2 Crores
contractors have to establish Quality Control laboratory)
h) Minor T & P and survey instruments and setting outworks, including
verification of line, dimensions, etc.
i) Watch and ward.
j) Traffic management/ Safety management during construction.
k) Expenditure on safeguarding environment.
iv. Sundries.
v. Financing Expenditure.
vi. Sales/ Turn overtax is replaced with GST wef 01.07.2017. The rates arrived in
this SoR are only basic rates which are exclusive of all taxes. However, as per
the suggestion of BoCE, the provision towards Works Contract Tax as per
applicable GST rates shall be added in the estimates.
vii. Work Insurance/ compensation - Works insurance is dispensed with vide G.O.
Ms. No: 61 Irrigation & CAD (PW: Reforms) Department Dt. 25-06-2013.
Further, It is decided not to insist upon insuring all the building works as
provision for this component is already deleted from the ‘Overheads &
Contractor’s Profit’ in building works.

5.0 OTHER GUIDELINES

1. Municipal Area Allowance, Agency or Tribal area allowance or any such allowance on
the labour components of civil, water supply & sanitary items, Electrical and Electro-
Mechanical items of building works shall be allowed wherever applicable as per the
guidelines and preamble of Common SoR: 2024-25. For the building work estimates
taken up in the notified Area Development Authorities constituted by the Government,
the Area Allowance on the labour components of civil, water supply & sanitary items,
Electrical and Electro-Mechanical items of building works may be allowed on specific
recommendation from such Area Development Authorities.
2. For the structures where the Standard and High Strength Concretes vide IS: 456-
2000 is required, mix design shall be carried out and rates may be arrived as per the
rate analysis appended in the A.P. Revised Standard Data-2009.
3. Certain items in the SoR are deleted due to change in the specification and some not
in use / non- availability in the market etc.,Further some new items are added
4. The Electrical and Electro-Mechanical items and corresponding rates, as proposed by
the Chief Engineer (R&B) Electrical have been considered in the Buildings SoR-2024-
25.
5. The specifications of the aggregates for sizes and gradation and its adoption shall be
as per IS 383-1970 and IS 2386 (Part 1 to Part 8).
6. No allowance towards ‘Labour Importation & Labour Amenities’ shall be added to the
data as they are included in the provision of ‘Over heads and contractor’s profit’.
7. For all the materials, the basic rates given in the Buildings SoR are ‘landing prices’ at
7
 the site which are exclusive of all taxes, except where mentioned specifically.
8. For Water Supply Sanitary items, the rates are not enhanced over SoR 2022-23 rates.
9. UPVC pipes were included in \water supply and sanitary items.
10. PEB structures were incorporated in AB section
11. The estimate preparing and sanctioning authorities are requested to invariably
enclose (i) quarry maps showing the shortest distance from the work site to the quarry
from where materials are proposed to be carted and (ii) certificates of quality, quantity,
and availability of materials in the identified quarries, for all those lead items of
estimate at the time of technical sanctions.
12. For the materials where the basic rates are mentioned as ‘quarry rates’ in the
Buildings SoR lead charges are to be added for the lead distances from the approved
quarries as applicable. Wherever the term “carriage” or “conveyance” is used in
schedule item, it shall be taken to include actual leads, lifts, loading, unloading and
stacking to the satisfaction of the technical sanctioning authority while making the
price-adjustments.
13. The conveyance charges per unit quantity of the materials are worked out, and
provided in the schedule of rates reckoning
i) for head loads with increment of 50 m upto 150m
ii) for mechanical conveyance with increment of 1 KM.

14. For building works taken up in the hill areas where the materials are conveyed on ghat
roads, the lead distance may be taken as 2.0 times of the existing length of the road
for the purpose of leads only for conveyance of materials based on the certificate for
the Ghat Road given by the Superintending Engineer concerned.
15. Loading and unloading charges are not payable for conveyance by head load.
16. Loading and Unloading charges are not payable for conveyance by mechanical
means, for disposal of excavated material unless specified.
17. The rates for unloading of materials except earth, sand, gravel, coarse aggregate,
rubble, size stone and cut stone, are inclusive of stacking wherever applicable.
18. The input rate for the water charges taken in Common Standard Schedule of Rates for
the basic data is for the sources at site, any water lead as applicable may be allowed
as per the conveyance charges.
19. Unless otherwise specified, all material rates shall be exclusive of all taxes, duties,
levies, royalty/seigniorage.
20. Any errors, omissions, corrections or suggestions shall be brought to the notice of the
‘COMMITTEE OF THE CHIEF ENGINEERS (Buildings SoR)’ for corrective action.
21. For any new items to be included in the ‘Schedule of Rates’, recommendations with
specific remarks of the respective departments should reach the ‘Committee of Chief
Engineers’ well in advance.
22. The CWC (Ministry of Irrigation) has recommended that “where standard or schedule
of rates are revised or where is necessary to do so, the primary guiding principle
should be escalation in labour and material cost and not on trend of rates quoted by
the contractors”. The ‘Committee of Chief engineers’ (Buildings SoR) have considered
the practicality and adoptability of the ‘Buildings-SoR’ in construction of the building
projects in finalizing the ‘Buildings-SoR’.
23. Wherever feasible, more emphasis is given to the technical specifications for the SoR
items by removing the brand names of the manufacturers from the specification.
24. The technical specifications and the rates of the corresponding items given in the SoR
are for the guidance only. The estimate preparing authorities are requested to obtain
literature for usage / application of construction / water proofing materials, epoxies etc,
from the manufacturers or authorized suppliers in the contract documents as per the
requirement.
25. Steel Centering & Scaffolding charges for Shear walls, RCC walls and Water tank
walls are incorporated in this Buildings SoR 2024-25. The rates given in the SoR are
for both faces of the respective members. The measurement of centering charges
shall be in ‘sqm’ for one face only and the centering charges given are for two faces of
centering.
26. Double Grooved and Precoated extruded Mineral (Cement) roof tiles are introduced.
27. Clarity on nomenclature of Floors for data calculations is given as below
8
 For To Read
GF F1
FF F2
SF F3
TF F4
28. A separate section for Post Tensioning works is introduced.

6.0 CONCLUSION
1. The Committee of Chief Engineers on Buildings-SoR: 2024-25 (Civil & Electrical) has met
in the chambers of Chief Engineer (R&B) Buildings& RSW, several times during the
year 2024 and approved the Buildings SoR:2024-25, without any tax elements based
on the representations received from various Engineering Departments. GST shall be
provided as per GST Act in Part-B of the estimate during preparation of estimates.

2. SSR Rates for Civil, Sanitary & water supply and Electrical Items are purely for the
guidance of the officers in preparation of estimates vide Para 113 of APPWD code.
Authority who prepares the estimate is however responsible for proper rates as
envisaged in Para 45 of APPWD code.
3. The rates published in the Buildings SoR are ceiling rates and the estimate preparing
authorities are responsible for the correctness and reasonableness of the Technical
Specifications and Rates adopted in the estimates.

9
BUILDING ITEMS

10
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

BRICKS & BUILDING BLOCKS

A.SECTION (ex-quarry price - excluding cost of
conveyance, loading & unloading)
I. SUB- SECTION ORDINARY CLAY BRICKS

Common burnt clay bricks of class as

BMT-A.01 per Table-1 of IS:1077-1992 Non- 1000 8480
1 MAT-00721 Modular of traditional size 23 x 11 x 7 Nos
cm
Common burnt clay bricks of class as
BMT-A.02 per Table-1 of IS:1077-1992 Modular of 1000 9338
2 MAT-00748
traditional size 19 x 9 x 9 cm Nos

FLY-ASH CEMENT/LIME SOLID

II. SUB- BLOCKS
SECTION (ex-quarry price - excluding cost of
conveyance, loading & unloading)
Fly ash cement/lime solid blocks with
compressive strength of 75 kg/sq.cm - 30
3 MAT-00749 BMT-A.03 IS:12894-1990 - CLASS - 7.5 - 290 x Each
225 x 140 mm
Fly ash cement/lime solid blocks with
compressive strength of 75 kg/sq.cm -
IS:12894-1990 - CLASS - 7.5 - 290 x 30
4 MAT-00750 BMT-A.04 Each
200 x 140 mm
Fly ash cement/lime solid blocks with
compressive strength of 75 kg/sq.cm - 25
5 MAT-00751 BMT-A.05 IS:12894-1990 - CLASS - 7.5 - 290 x Each
150 x 140 mm
Fly ash cement/lime solid blocks with
compressive strength of 75 kg/sq.cm - 20
6 MAT-00752 BMT-A.06 IS:12894-1990 - CLASS - 7.5 - 290 x Each
112/100 x 140 mm
Fly ash cement/lime solid blocks with
compressive strength of 75 kg/sq.cm -
IS:12894-1990 - CLASS - 7.5 - 225 x 10
7 MAT-00753 BMT-A.07 Each
100 x 60 mm
Fly ash cement/lime solid blocks with
compressive strength of 75 kg/sq.cm - 15
8 MAT-00754 BMT-A.08 IS:12894-1990 - CLASS - 7.5 - 145 x Each
225 x 140 mm
Fly ash cement/lime solid blocks with
compressive strength of 75 kg/sq.cm - 16
9 MAT-00755 BMT-A.09 IS:12894-1990 - CLASS - 7.5 - 145 x Each
200 x 140 mm
Fly ash cement/ lime solid blocks with
compressive strength of 50 kg/sq.cm -
32
10 MAT-00756 BMT-A.10 IS:12894-1990 - CLASS - 5 -290 x 225 x Each
140 mm

11
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit
SoR 2024-
25 (Rs.)
1 2 3 4 5
Fly ash cement/ lime solid blocks with
compressive strength of 50 kg/sq.cm - 25
11 MAT-00757 BMT-A.11 IS:12894-1990 - CLASS - 5 -290 x 200 x Each
140 mm
Fly ash cement/ lime solid blocks with
compressive strength of 50 kg/sq.cm -
IS:12894-1990 - CLASS - 5 - Fly ash
cement/ lime solid blocks with 25
12 MAT-00758 BMT-A.12 compressive strength of 50 kg/sq.cm - Each
IS:12894-1990 - CLASS - 5 -290 x 150 x
140 mm
Fly ash cement/ lime solid blocks with
compressive strength of 50 kg/sq.cm - 16
13 MAT-00759 BMT-A.13 IS:12894-1990 - CLASS - 5 -290 x Each
112/100 x 140 mm
Fly ash cement/ lime solid blocks with
compressive strength of 50 kg/sq.cm - 8
14 MAT-00760 BMT-A.14 IS:12894-1990 - CLASS - 5 -225 x 100 x Each
60 mm
Fly ash cement/ lime solid blocks with
compressive strength of 50 kg/sq.cm - 14
15 MAT-00761 BMT-A.15 IS:12894-1990 - CLASS - 5 -145 x 225 x Each
140 mm
Fly ash cement/ lime solid blocks with
compressive strength of 50 kg/sq.cm - 13
16 MAT-00762 BMT-A.16 IS:12894-1990 - CLASS - 5 -145 x 200 x Each
140 mm
Supply of well burnt cinder aggregates 1
17 MAT-00763 BMT-A.17 as per IS: 2686-1977 Cum 700

AUTOCLAVED CONCRETE BLOCKS

III. SUB- SECTION (landing cost - including cost of conveyance, loading &
unloading)
Supply of Aerated (Cellular)
Autoclaved Concrete Blocks
conforming to IS:2185 (Part-3) - 1984
and IS:6441-1972 of Compressive
strength 3 N/mm2
18 MAT-00764 BMT-A.18 600 x 200 x 100 mm Each 35
19 MAT-00765 BMT-A.19 600 x 200 x 150 mm Each 52.5
20 MAT-00766 BMT-A.20 600 x 200 x 200 mm Each 70
21 MAT-00767 BMT-A.21 600 x 200 x 230 mm Each 80
Supply of Cement based, Polymer
modified Pre-mixed dry jointing mortar 18
22(a) MAT-05337 BMT-A.22 for laying AAC Blocks – Masonry Glue 1Kg
110 or equivalent
22(b) BMT-A.23 Supply of Cement based, Polymer 1Kg 13

12
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR
2024-25
(Rs.)
1 2 3 4 5
modified Pre-mixed bonding coat for
plastering on smooth concrete/masonry
surfaces.
Supply of Cement based, Polymer
modified Pre-mixed dry plastering 11
22(c) BMT-A.24 mortar for plastering walls, columns, 1Kg
ceilings.
Supply of Cement based, Polymer
modified Pre-mixed dry mortar for fixing 17
22(d) BMT-A.25 1Kg
tiles on walls & floors
NATURAL FLOORING STONES
B.SECTION (ex-quarry price – excluding cost of conveyance,
loading & unloading)
I.SUB- SECTION LOCALLY AVAILABLE FLOORINGSTONES

Kadapa slab 40 mm thick and size not 1

23 MAT-00768 BMT-B.01 less than 0.457 M x 0.457 M Sqm 130
Kadapa slab 50 mm thick and size not 1
24 MAT-00769 BMT-B.02 less than 0.457 M x 0.457 M Sqm 151

Shahabad /Tandur Rough Stone slabs 10

25 MAT-00770 BMT-B.03 of minimum of 25 mm thick Sqm 1195

Shahabad / Tandur Rough Stone slabs 10

26 MAT-00771 BMT-B.04 of minimum 40 mm thick Sqm 1560

Polished Shahabad/ Tandur stone slabs 10

27 MAT-00772 BMT-B.05 of 15 to 18 mm thick Sqm 1975

Polished black Kadapa slabs minimum 10

28 MAT-00773 BMT-B.06 of 15 mm thick (0.457x0.457M) Sqm 1818

Polished Bethamcherla pure (marble

type) white stone minimum 25 mm thick 10 4778
29 MAT-00774 BMT-B.07 Sqm
(0.254Mx0.254M)
Polished Bethamcherla coloured stone
minimum 25 mm thick (0.254M 10 3325
30 MAT-00775 BMT-B.08 Sqm
x0.254M)
Polished black Kadapa slabs of all 10
31 MAT-00784 BMT-B.17 sizes between 25 - 30 mm thickness Sqm 1922

II.SUB- SECTION NATURAL FLOORING STONES –MARBLE

Polished Marble slabs of Dongari/

Adanga/ Marodh/ Rajgangpur etc., 780
32 MAT-00779 BMT-B.12 variety of thickness between 16 mm to 1 sqm
20 mm of sizes from 600 mm to 900 mm
Polished Marble slabs of Dongari/
Adanga/ Marodh/ Rajgangpur etc., 640
33 MAT-00780 BMT-B.13 variety of thickness between 16 mm to 1 sqm
20 mm of sizes up to 600 mm
34 MAT-00781 BMT-B.14 Polished Marble slabs of any variety and 1 sqm 1070

13
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit
SoR 2024-
25 (Rs.)
1 2 3 4 5
gang saw cut (Such as Dongari/
Adanga/ Marodh/ Rajgangpur etc) 16
mm to 20 mm (average) thick ( 0.610 M
width of any length)
510
Polished Marble Tiles of 8 - 10 mm
35 MAT-00782 BMT-B.15 thickness of all sizes and varieties 1 sqm

NATURAL FLOORING STONES –GRANITE

BMT-B.09 to DELETED
36
BMT-B.16
Galaxy Granite 18-20 mm thick upto
2.43M (Premium Quality)
NEW ITEM BMT-B.17 1 sqm 2152

Telephone Black Granite 18-20 mm thick

upto 2.43M
NEW ITEM BMT-B.18 1 sqm 1830

Anti - skid Granite (Black) 18-20 mm thick

upto 2.43M (For Stair case)
NEW ITEM BMT-B.19 1 sqm 1506

Tan brown Granite 18-20 mm thick upto

2.43M
NEW ITEM BMT-B.20 1 sqm 807

Cheeta Brown Granite 18-20 mm thick

upto 2.43M
NEW ITEM BMT-B.21 1 sqm 1184

Jasmine Red 18-20 mm thick upto 2.43M

NEW ITEM BMT-B.22 1 sqm 1184
Moon White 18-20 mm thick upto 2.43M
NEW ITEM BMT-B.23 1 sqm 1291
Cheery Red 18-20 mm thick upto 2.43M
NEW ITEM BMT-B.24 1 sqm 1076
Multi red colour Grantie 18-20 mm thick
upto 2.43M
NEW ITEM BMT-B.25 1 sqm 1184

WALL & FLOOR TILES

(Landing cost – including loading, cost of
C.SECTION
conveyance, unloading)
I.SUB- SECTION NON-PORCELAIN CERAMIC FLOORTILES

Supply of Non-skid red or white full body

Ceramic floor tiles of Size 300 mm x 300
mm and thickness between 7-8 mm and
1st quality conforming to IS:13711, 396.40
IS:13712, IS:13630 (Parts 1 to 15) of 1 sqm
40 MAT-00785 BMT-C.01
any colour and finish in all shades and
designs

14
 Supply of Non-skid red or white full body
Ceramic floor tiles of Size 450 mm x 450
mm and thickness between 7-8 mm and
1st quality conforming to IS:13711, 390.00
IS:13712, IS:13630 (Parts 1 to 15) of 1 sqm
41 MAT-00786 BMT-C.02
any colour and finish in all shades and
designs
Supply of Non-skid red or white full body
Ceramic floor tiles of Size 600 mm x 600
mm and thickness between 8-10 mm
and 1st quality conforming to IS:13711, 520.00
IS:13712, IS:13630 (Parts 1 to 15) of 1 sqm
42 MAT-00787 BMT-C.03
any colour and finish in all shades and
designs
Supply of Non-skid red or white full body
Ceramic floor tiles of Scratch free-stain 530.00
43 MAT-00788 BMT-C.04 1 sqm
free and scratch free-nano finish of Size
600 mm x 600 mm and thickness
Basic
Rate for
S. No CFMS code Item Code Description of item Unit
SoR 2024-
25 (Rs.)
1 2 3 4 5
between 8-10 mm and 1st quality
conforming to IS:13711, IS:13712,
IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and designs

PORCELAIN VITRIFIED FLOOR TILES

II. SUB- SECTION

44 MAT-00789 BMT-C.05 ITEM DELETED

Supply of soluble salt porcelain vitrified
tiles screen printed and polished of size
600 x 600 mm and thickness between 8-
10 mm 1st quality conforming to 425.00
IS:13711, IS:13712, IS:13630 (Parts 1 1 sqm
45 MAT-00790 BMT-C.06
to 15) of any colour and finish in all
shades and designs.
Supply of Nano polished /stain free
soluble salt porcelain vitrified tiles
screen printed of size 600 x 600 mm
and thickness between 8-10 mm 1st 462.00
quality conforming to IS:13711,
46 MAT-00791 BMT-C.07 IS:13712, IS:13630 (Parts 1 to 15) of 1 sqm
any colour and finish in all shades and
designs
47 MAT-00792 BMT-C.08 ITEM DELETED
Supply of Double charged / multi
charged stain free full body porcelain
vitrified tiles with double layer pigment
of 1st quality conforming to IS:13711,
IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and
designs

15
 Supply of Double charged / multi
charged stain free full body porcelain
vitrified tiles with double layer pigment
of Size 600 x 600 mm and thickness 625.00
between 8-10 mm and 1st quality 1
48 MAT-00793 BMT-C.09 conforming to IS:13711, IS:13712, Sqm
IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and designs
Supply of Double charged / multi
charged stain free full body porcelain
vitrified tiles with double layer pigment
of Size 800 x 800 mm and thickness 770.00
between 9-11 mm and 1st quality 1
49 MAT-00794 BMT-C.10 conforming to IS:13711, IS:13712, Sqm
IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and designs
50 MAT-00795 BMT-C.11 ITEM DELETED
Basic
Rate for
CFMS code Item Code Description of item Unit
S. No SoR 2024-
25 (Rs.)
1 2 3 4 5
Supply of digital / polished glazed full
body porcelain vitrified tiles with any
type of design texture such as marble
finish, wooden, bamboo, stone finishes
51 MAT-00796 BMT-C.12 etc., scratch less, stain free and Size 1 sqm 770.00
800 x 800 mm and thickness between 9-
11 mm of 1st quality conforming to
IS:13711, IS:13712, IS:13630 (Parts 1
to 15) of any colour and finish in all
shades and designs
Supply of digital / polished glazed full
body porcelain vitrified tiles with any
type of design texture such as marble
finish, wooden, bamboo, stone finishes
etc., scratch less, stain free and Size 960.00
900 x 900 mm and thickness between 9-
11 mm of 1st quality conforming to 1 sqm
52 MAT-00797 BMT-C.13
IS:13711, IS:13712, IS:13630 (Parts 1
to 15) of any colour and finish in all
shades and designs
Supply of glazed vitrified tiles with matt
finish of size 600 x600mm and thickness
between 9-10 mm 1st quality confirming 825.00
BMT- to IS: 13711,IS: 13712,IS: 13630 (Parts
52(a) 1 sqm
C.13(a) 1 to 15) of any colur and finish in all
shades and designs .
53 to BMT-C.14
ITEMS DELETED
59 to BMT-C.20

III.SUB- SECTION CERAMIC WALL TILES

Supply of glazed red or white full body

ceramic wall tiles of Size 200 x 300 mm
/ 245 mm x 325 mm and thickness 6
mm and 1st quality conforming to 330.00
IS:13711, IS:13712, IS:13630 (Parts 1 1 sqm
60 MAT-00805 BMT-C.21
to 15) of any colour and finish in all
shades and designs
16
 Supply of glazed red or white full body
ceramic wall tiles of Size 300 x 450 mm
/ 320 mm x 400 mm and thickness 6
mm and 1st quality conforming to 426.00
IS:13711, IS:13712, IS:13630 (Parts 1 1 sqm
61 MAT-00806 BMT-C.22
to 15) of any colour and finish in all
shades and designs
Supply of glazed red or white full body
ceramic wall tiles of Size 300 x 600 mm
and thickness between 6-8 mm and 1st
quality conforming to IS:13711, 556.00
IS:13712, IS:13630 (Parts 1 to 15) of 1 sqm
62 MAT-00807 BMT-C.23
any colour and finish in all shades and
designs
Basic
Rate for
S. No CFMS code Item Code Description of item Unit
SoR 2024-
25 (Rs.)
1 2 3 4 5
IV.SUB-SECTION PORCELAIN WALL TILES
Supply of glazed full body porcelain
wall tiles of size 300 x 600 mm with any
type of design texture such as marble
finish, wooden, bamboo, stone finishes
etc., scratch less, stain free and 597.00
thickness between 6-8 mm 1st quality 1 sqm
63 MAT-00808 BMT-C.24 conforming to IS:13711, IS:13712,
IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and designs
Supply of digital / polished glazed full
body porcelain wall tiles of size 300 x
600 mm with any type of design texture
such as marble finish, wooden, bamboo,
stone finishes etc., scratch less, stain 599.00
free and thickness between 6-8 mm 1st
quality conforming to IS:13711, 1 sqm
64 MAT-00809 BMT-C.25
IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and
designs
Supply of digital / polished glazed full
body porcelain highlighter wall tiles of
size 300 x 600 mm with any type of
design texture such as marble finish,
wooden, bamboo, stone finishes etc., 605.00
scratch less, stain free and thickness
between 6-8 mm 1st quality conforming 1 sqm
65 MAT-00810 BMT-C.26
to IS:13711, IS:13712, IS:13630 (Parts
1 to 15) of any colour and finish in all
shades and designs
Supply of screen printed glazed full
body porcelain wall tiles of size 300 x
600 mm with any type of design texture
such as marble finish, wooden, bamboo,
stone finishes etc., scratch less, stain 631.00
free and thickness between 6-8 mm 1st
quality conforming to IS:13711, 1 sqm
66 MAT-00811 BMT-C.27
IS:13712, IS:13630 (Parts 1 to 15) of
any colour and finish in all shades and
designs

17
 Supply of glazed full body porcelain
wall tiles of size 400 x 600 mm with any
type of design texture such as marble
finish, wooden, bamboo, stone finishes
etc., scratch less, stain free and 710.00
thickness between 6-8 mm 1st quality 1 sqm
67 MAT-00812 BMT-C.28 conforming to IS:13711, IS:13712,
IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and designs
68 to BMT-C.29 to
ITEMS DELETED
70 BMT-C.31
Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Providing and fixing wall dado with
epoxy emulsion grout/ synthetic/ resin
based adhesive in specified thick and 328.00
1 sqm
71 MAT-00816 BMT-C.32 pointing with specified colour epoxy
grout excluding cost of tiles
Providing and fixing wall dado with
cement based adhesive in specified 168.00
72 MAT-00817 BMT-C.33 thick and pointing with specified colour 1 sqm
epoxy grout excluding cost of tiles
Providing and fixing flooring with full
depth jointing and pointing to the
Vitrified/ Ceramic Tile flooring in
specified thick for tiles of any sizes with 335.00
epoxy emulsion grout/ synthetic / resin 1 sqm
73 MAT-00818 BMT-C.34
adhesive in width of 3-5 mm with Nylon
spacers excluding cost of tiles.
Providing and fixing flooring with full
depth jointing and pointing to the
Vitrified/ Ceramic Tile flooring in
specified thick for tiles of any sizes with 169.00
cement based adhesive in width of 3-5 1 sqm
74 MAT-00819 BMT-C.35
mm with Nylon spacers excluding cost
of tiles .
Providing and fixing flooring with full
depth jointing and pointing to the
Marble/ Granite flooring for any sizes 615.00
75 MAT-00820 BMT-C.36 with epoxy emulsion grout/ synthetic / 1 sqm
resin based adhesive in width of 3-5 mm
excluding cost of tiles.
Providing and fixing flooring with full
depth jointing and pointing to the
Marble/ Granite flooring for any sizes 335.00
1 sqm
76 MAT-00821 BMT-C.37 with cement based adhesive in width of
3-5 mm excluding cost of tiles.

77 BMT-C.50 Breeze blocks of size 8’x8” and 1 sqm 42

thickness 60mm

78 BMT-C.51 Ventilations of size 12”x18” and 1 sqm 96

thickness 40mm

79 BMT-C.52 Ventilations of size 12”x24” and 1 sqm 128

thickness 40mm

18
 V.SUB- SECTION GLASS MOSAIC TILES

79 to BMT-C.38 to
ITEMS DELETED
81 BMT-C.40

VI.SUB- SECTION WALL CLADDING TILES

Basic
S. No Item Code Description of item Unit Rate for
CFMS code
SoR 2024-
25 (Rs.)
1 2 3 4 5
Supply of glazed full body porcelain tiles
for external cladding purposes of any
size and thickness between 6-10 mm
1st quality conforming to IS:13711,
82 BMT-C.41 IS:13712, IS:13630 (Parts 1 to 15) of 1 sqm 565
MAT-00825
any colour and finish in all shades and
designs.
Supply of glazed red or white full body
ceramic tiles for external cladding
purposes of any size and thickness
83 MAT-00826 BMT-C.42 between 5-7 mm 1st quality conforming to 1 sqm 445
IS:13711, IS:13712, IS:13630 (Parts
1 to 15) of any colour and finish in all
shades and designs
Supply of glazed red or white full body
ceramic tiles for external cladding
purposes of any size and thickness
between 10-12 mm 1st quality conforming
to IS:13711, IS:13712, IS:13630 (Parts 1 1 sqm 550
84 MAT-00827 BMT-C.43
to 15) of any colour and finish in all shades
and designs
85 MAT-00828 BMT-C.44 ITEM DELETED

Brick tiles of size 230mm x 75 mm and

86 MAT-08731 BMT-C.45 1 sqm 456
12mm thick

Natural stone (Bethamcherla or

87 MAT-08732 BMT-C.46 equivalent) of size not exceeding 300mm 1 sqm 568
x300mm and 18-20mm thick

Terracotta tiles size 125mm x 200mm and

88 MAT-08733 BMT-C.47 1 sqm 405
12-15mm thick

VII SUBSECTION EPOXY FLOORING, COVING

Supply and application of epoxy flooring of

light green or light blue colour seamless
joint free finish with 3mm thickness and
89 MAT-08734 BMT-C.48 1 sqm
anti slip & water washable chemical
resistance durable and non particle 1180
shedding with attractive finishing

Supply and application of epoxy coving

90 MAT-08735 BMT-C.49 50mmx50mm width at the corners of the 1 RM 515
walls

VIIISUB-SECTION ROOF TILES

19
 Supply and installation of Double grooved
and precoated extruded mineral (cement)
roof tiles of size 420 mmx330 mm of
91 BMT-C.53
corrugated profile tiles with variable
overlapping for coverage of 1-1.2 per tile
with European standards BEEN 490:2004
1
91 (a) BMT-C.53(a) Monotone colour ; Orange, red 1210
Sqm
Dual colours : Antique Red, Grey, Brown 1
91(b) BMT-C.53 (b) 1364
etc Sqm
1
91(c) BMT-C.53 ( c) Premium Colors : Antique green and blue 1660
Sqm
Supply and installation of precoated
92 BMT-C.54 extruded mineral (cement) ridge tiles and
other fittings of same brand
1
92. (a) BMT-C.54 (a) Monotone colour ; Orange, red 530
Sqm
Dual colours : Antique Red, Grey, Brown 1
92. (b) BMT-C.54(b) 608.30
etc Sqm
1
92. (c) BMT-C.54 (c ) Premium Colors : Antique green and blue 706.20
Sqm
Supply of Imported Heat reflective cum
Water Proof Sheet Veltiun RadenSheild of
thickness 550 micron+/-10 microns with
Nail Sealant for complete water tightness,
1
93 BMT-C.55 Poly proplene Spun bound layer for better 710
Sqm
strength and Aluminium Foil for Heat
Reflection of size per roll is 1.25X50m for
coverage of 62.5 Sqmtrs with required
tape for joints and overlapping.
Supply of Imported UV Resistant & Flame
Resistant Stretchable Corrugated surface
1
94 BMT-C.56 with Special adhesive for avoiding Cement 1045
Sqm
Motor under Ridges size of Roll is
5MX25Cms
Supply of High Quality Aluminium Bent
valleys which can easy foldable as per site
condition to prevent back flow of rain 910
95 BMT-C.57 1 sqm
Water Back Flow and to avoid leakages at
Valley Area of size 1.2MX36Cm of any
Reputed make

D.SECTION PAVING & INTERLOCKING TILES

TERRAZO FLOOR TILES (PLAIN & CHEQURED)
(landing cost - including cost of conveyance, loading &
unloading)
I.SUB- SECTION

Supplying precast terrazzo chequered tiles

conforming to IS: 13801 using marble
aggregates of size 10 mm , sand, marble
powder, white cement pigments etc., with
terrazzo topping not less than 6 mm of
96 BMT-D.01 tiles overall size not less than 20 mm thick 1 sqm
MAT-00829 315
of any coloured shades.

Supplying precast terrazzo tiles

conforming to IS: 13801 using marble
97 aggregates of size 10 mm , sand, marble
powder, white cement pigments etc., with
MAT-00830 BMT-D.02 1 sqm 330
terrazzo topping not less than 6 mm of
20
 tiles overall size not less than 20 mm thick
white shades.

Supplying precast terrazzo plain tiles

conforming to IS: 13801 using marble
aggregates of size 10 mm , sand, marble
98
powder, white cement pigments etc., with
terrazzo topping not less than 6 mm of 340
MAT-00831 BMT-D.03 1 sqm
tiles overall size not less than 20 mm thick
any coloured shades.
II.SUB- SECTION CEMENT CONRETE FLOOR TILES (PLAIN &
CHEQUERED)
Supplying plain Cement Concrete general
purpose tiles conforming to IS: 13801
99 using aggregates, cement, pigments of 1
MAT-00832 BMT-D.04 size 300 x 300 mm and thickness 20 mm Sqm 255
of any shades.
Supplying Chequered Cement Concrete
heavy duty tiles conforming to IS: 13801
1
100 MAT-00833 BMT-D.05 using aggregates, cement, pigments of 300
Sqm
size 300 x 300 mm and thickness 20 mm
of any shades.
Supplying plain Cement Concrete general
purpose tiles conforming to IS: 13801
101 using aggregates, cement, pigments of 1
MAT-00834 BMT-D.06 size 300 x 300 mm and thickness 25 mm Sqm 322
of any shades.
Supplying Chequered Cement Concrete
heavy duty tiles conforming to IS: 13801
102 using aggregates, cement, pigments of 1
MAT-00835 BMT-D.07 size 300 x 300 mm and thickness 25 mm Sqm 348
of any shades.
Supplying plain Cement Concrete general
purpose tiles conforming to IS: 13801
103 using aggregates, cement, pigments of 1
MAT-00836 BMT-D.08 size 400 x 400 mm and thickness 25 mm Sqm 325
of any shades.
Supplying Chequered Cement Concrete
heavy duty tiles conforming to IS: 13801
104 using aggregates, cement, pigments of 1
MAT-00837 BMT-D.09 size 400 x 400 mm and thickness 25 mm Sqm 330
of any shades.
Supply of high strength Cement
Concrete plain Step tile with edge half
105 rounded and grooved conforming to IS: 500
BMT- 13801 using aggregates, cement, 1
MAT-00838
D.10 pigments of regular colour, design Sqm
andof 25 mm thickness
Supply of high strength Cement
Concrete terrazzo/pre-polished/
chequered Step tiles with edge rounded
106 and grooved conforming to IS: 13801 1
BMT- using aggregates, cement, pigments of 525
MAT-00839 Sqm
D.11 any premium colour, design and of 25
mm thickness

PRE-CAST CONCRETE BLOCKS FORPAVING

III.SUB- SECTION
Supply of precast concrete blocks for
107 paving of M-30 grade and thickness not 350
BMT- less than 50 mm for Non-traffic areas 1
MAT-00840
D.12 conforming to IS 15658:2006 in allshapes Sqm
21
 and designs as per themanufacturer’s
specification

Supply of precast concrete blocks for

paving of M-35 grade and thickness not
108 less than 60 mm for Light traffic areas 387
conforming to IS 15658:2006 in all 1
MAT-00841 BMT-D.13
shapes and designs as per the Sqm
manufacturer’s specification
Supply of precast concrete blocks for
paving of M-40 grade and thickness not
less than 80 mm for Medium traffic 550
areas conforming to IS 15658:2006 in 1
109 MAT-00842 BMT-D.14
allshapes and designs as per the Sqm
manufacturer’s specification
Supply of precast concrete blocks for
paving of M-50 grade and thickness not
less than 100 mm for Heavy traffic areas 613
conforming to IS 15658:2006 in all 1
110 MAT-00843 BMT-D.15
shapes and designs as per the Sqm
manufacturer’s specification
Supply of precast concrete blocks for
paving of M-55 grade and thickness not
less than 120 mm for very heavy traffic 700
areas conforming to IS 15658:2006 in 1
111 MAT-00844 BMT-D.16
allshapes and designs as per the Sqm
manufacturer’s specification
Labour charges for laying & fixing of
precast concrete blocks for paving of all
grades, any thickness, all sizes &
LAB-01180 shapes including all labour charges for 200
112 1
BMT-D.17 loading & unloading, laying to desired Sqm
lines and levels complete excluding cost
of cement, sand, water, electricity etc

Supply of Glass Fibre Reinforced

Concrete Tiles of size 300 x 300 mm
/400 x 400 mm and thickness of not
113 less than 25mm heavy duty conforming 1
426
MAT-08736 BMT-D.21 to IS 13801 in all shapes and designs Sqm
as per the manufacturer’s specification

Supply of Glass Fibre Reinforced

Concrete Pavers of size 225 x 175 mm
114 MAT-08737 and thickness of not less than 60mm
heavy duty conforming to IS 1
BMT-D.22 15658:2006 in all shapes and designs Sqm 577
as per the manufacturer’s specification

IV.SUB-SECTION VINYL FLOORING

Vinyl Flooring Sheets/ tiles having a

nominal total thickness of 2 mm with a
wearing surface impregnated
polyurethane homogeneous mixture of
115 592
PVC, Plasticizers, Urethane, color 1
MAT-05338 BMT-D.18 pigments with wearing resistance and Sqm
Fire Resistance as per standards

22
 Vinyl Composition Floor Tiles of size
305 mm x 305 mm having an overall
thickness of 2.0mm with a wearing
116 surface impregnated polyurethane 611
homogeneous mixture of PVC, 1
MAT-05339 BMT-D.19 Plasticizers, Urethane, color pigments Sqm
with wearing resistance and Fire
Resistance as per standards

Vinyl Flooring Sheets or tiles having a

nominal total thickness of 1.5 mm with a
wearing surface impregnated
polyurethane homogeneous mixture of
117 377
PVC, Plasticizers, Urethane, color 1
MAT-05340 BMT-D.20 pigments with wearing resistance and Sqm
Fire Resistance as per standards

118 BMT-D.21 Grass pavers of size 10”x10” and 1

50
thickness 60mm Sqm

119 BMT-D.22 Grass pavers of size 12”x12” and 1

70
thickness 60mm Sqm

120 BMT-D.23 Roof cool tiles of size 10”x10” and 1

30
thickness 15mm Sqm

TIMBER & ROOFING MATERIALS

(Landing cost – including cost of
conveyance, loading & unloading) Note:
E.SECTION Before proposing the Teak WoodItems,
the estimating authorities shall obtain
prior approval from the competent
authority

I.SUB- SECTION MEDIUM TEAK WOOD

Medium Teak Wood scantlings: up to

121 MAT-00846 BMT- 2.0 M 1 cum 86000
E.01

Medium Teak Wood scantlings: 2.0 to

122 MAT-00847 BMT- 3.0 M 1 cum 98500
E.02

Medium Teak Wood scantlings: above

MAT-00848 BMT- 3.0 M 1 cum 110946
123 E.03

Basic Rate
for SoR
S. No CFMS code Item Code Description of item Unit 2024-25
(Rs.)
1 2 3 4 5
Medium Teak Wood Plancks: any
173500
MAT-00849 BMT-E.04 thickness 1 cum
124

II.SUB- SECTION BEST TEAK WOOD

125 MAT-00850 BMT-E.05 Best Teak Wood scantlings: up to 2.0 M 1 cum 143600
126 MAT-00851 BMT-E.06 Best Teak Wood scantlings: 2.0 to 3.0 M 1 cum 152000

23
127 Best Teak Wood scantlings: above 3.0 165350
MAT-00852 BMT-E.07 M 1 cum
128 MAT-00853 BMT-E.08 Best Teak Wood Plancks: any thickness 1 cum 190200

III.SUB- SECTION BURMA TEAK WOOD

129 Burma Teak Wood scantlings: up to 2.0

MAT-00854 BMT-E.09 M 1 cum 191575

130 Burma Teak Wood scantlings: 2.0 to 3.0

MAT-00855 BMT-E.10 M 1 cum 202979

131 Burma Teak Wood scantlings: above

MAT-00856 BMT-E.11 3.0 M 1 cum 217709

132 Burma Teak Wood Plancks: any

MAT-00857 BMT-E.12 thickness 1 cum 231146

IV.SUB- SECTION ASSAM TEAK WOOD

133 Assam Teak Wood scantlings: any

MAT-00858 BMT-E.13 length 1 cum 53228

134 Assam Teak Wood Plancks: any

MAT-00859 BMT-E.14 thickness 1 cum 78753

V.SUB- SECTION SAL/ COUNTRY WOOD

135 MAT-00860 BMT-E.15 Sal Wood scantlings: any length 1 cum 53228
136 MAT-00861 BMT-E.16 Sal Wood Plancks: any thickness 1 cum 78753

VI.SUB- SECTION ROOFING MATERIAL

137 MAT-00862 BMT-E.17 A.C sheet Corrugated 6 mm thick 1 sqm 245

138 MAT-00863 BMT-E.18 A.C sheet plain 4 mm thick 1 sqm 171
139 MAT-00864 BMT-E.19 A.C sheet plain 6 mm thick 1 sqm 180
Plain or Corrugated Galvanized iron
140 sheets as per IS 277 (0.1 mm to 0.8 mm 76
MAT-00865 BMT-E.20 1 kg
thickness)
Supply of UV resistant multi-wall
polycarbonate sheets for roofing of any 1 1300
141 MAT-00866 BMT-E.21 Sqm
colour - 6 mm thick
Aluminium universal glazing set 40 mm
142 MAT-00867 BMT-E.22 wide for jointing and fixing polycarbonate 1 RM 127.5
sheets

Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Supply of UV resistant multi -wall
polycarbonate sheets for roofing of any 1 1450
143 MAT-05341 BMT-E.23 colour -10 mm thick. Sqm

24
 STEEL MATERIALS (Landing cost – including
F.SECTION loading, cost of conveyance, unloading)

I.SUB- SECTION MILD STEEL MATERIALS

Supply & fixing of Rolling shutter made

of 80 x 1.25 mm machine rolled CRCA
laths, interlocked together through their
entire length and jointed together at the
ends by end-locks, mounted on
specially designed pipe shaft of 50mm
dia nominal bore MS B class pipe with
brackets, plates, guide channels,
stoppers, bottom locking plates and 4481
arrangements for inside & outside
locking with push-pull operations
including cost of hood cover and springs 1
144 MAT-00895 BMT-F.29 Sqm
complete, painted with one coat of
approved steel primer, locks, ball
bearings, all accessories etc complete
for finished item of work as per special
spn: 1108
Supplying & fixing collapsible steel
shutters with vertical, double channel of
20 x10x2 mm of 100 mm centre
,Bracers with flat iron 40x40x6 mm with
38 mm dia steel pulleys, the top, bottom
and side vertical frames of the
collapsible gate with 65x65mmx8mm
MS Angle and middle guide rail at site 3891
height with 65mmx8mm MS flat for the 1
145 MAT-00896 BMT-F.30 pulleys to guide and fixed with Sqm
locking arrangements, stoppers,
handles, all accessories all fixtures and
painted with one coat of approved steel
primer etc., complete for finished item of
work as per special spn 1105
Expanded metal sheets as per IS-412-
1962- Light Weight-25 mm(SWM)x75
146 MAT-00875 BMT-F.09
1 183
mm (LWM)3.25 mm Wide and 1.25 mm Sqm
thick

Expanded metal sheets as per IS-412-

1962- Light Weight-20 mm(SWM)x60
147 MAT-00876 BMT-F.10
1 183
mm(LWM) 2.50 mm Wide and 1.25 mm Sqm
thick
Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Expanded metal sheets as per IS-412-
1962- Light Weight-20 mm(SWM)x50 1 183
148 MAT-00877 BMT-F.11 mm(LWM) 2.50 mm Wide and 1.25 mm Sqm
thick
Expanded metal sheets as per IS-412-
1962- Medium Weight-25 mm(SWM)x75 1 253
149 MAT-00878 BMT-F.12 mm(LWM) 3.25 mm Wide and 1.60 mm Sqm
thick
25
 Expanded metal sheets as per IS-412-
1962- Medium Weight-20 mm(SWM)x60 1 252
150 MAT-00879 BMT-F.13 mm(LWM) 2.50 mm Wide and 1.60 mm Sqm
thick
Expanded metal sheets as per IS-412-
1962- Medium Weight-20 mm(SWM)x50 1 252
151 MAT-00880 BMT-F.14 mm(LWM) 2.50 mm Wide and 1.60 mm Sqm
thick
Expanded metal sheets as per IS-412-
1962- Heavy Weight-25 mm(SWM)x75 1 269
152 MAT-00881 BMT-F.15 mm(LWM) 3.25 mm Wide and 2.24 mm Sqm
thick
Expanded metal sheets as per IS-412-
1962- Heavy Weight-20 mm(SWM)x60 1 269
153 MAT-00882 BMT-F.16 mm(LWM) 2.50 mm Wide and 2.24 mm Sqm
thick
Expanded metal sheets as per IS-412-
1962- Heavy Weight-20 mm(SWM)x50 1 269
154 MAT-00883 BMT-F.17 mm(LWM) 2.50 mm Wide and 2.24 mm Sqm
thick

156 Rabbit wire mesh (chicken mesh) of not 1

MAT-00894 BMT-F.28 less than 30 gauge Sqm 23
157 MAT-00869 BMT-F.02 Country Nails 1 Kg 80
158 MAT-00870 BMT-F.03 Wire Nails 1 Kg 80

159 Mild Steel Tubes & pipes of all

MAT-00871 BMT-F.04 diameters as per IS-1161 1 Kg 87
Supplying Galvanized Steel Barbed wire
conforming to IS 278 - 1978 : Type A -
159 IOWA Type Designation as per standard 115
MAT-00873 BMT-F.07 1 Kg
specification
Supplying Galvanized Steel Barbed wire
conforming to IS 278 - 1978 : Type B -
160 Glidden Type Designation as per 105
MAT-00874 BMT-F.08 1 Kg
standard specification
Galvanized Iron fly proof wire mesh of 1
161 MAT-00884 BMT-F.18 272
not less than 20 gauge Sqm
Hot dipped Galvanised Iron Chain link
mesh 8 gauge - (4.0 mm) as per IS: 1
162 2721-1979: 2"x2" (50 mm x 50 mm) - 8 569
MAT-00886 BMT-F.20
Gauge Sqm
Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

II.SUB- SECTION GALVANIZED STEEL MATERIALS

Hot dipped Galvanised Iron Chain link

mesh 8 gauge - (4.0 mm) as per IS: 1 500
163 MAT-00887 BMT-F.21 2721-1979: 2½"x2½" (63 mm x 63 mm) Sqm
- 8 Gauge
Hot dipped Galvanised Iron Chain link
mesh 8 gauge - (4.0 mm) as per IS: 1 437
164 MAT-00888 BMT-F.22 2721-1979: 3"x3" (76 mm x 76 mm) - 8 Sqm
Gauge
26
 Hot dipped Galvanised Iron Chain link
mesh 8 gauge - (4.0 mm) as per IS: 1 307
165 MAT-00889 BMT-F.23 2721-1979: 4"x4" (102 mm x 102 mm) - Sqm
8 Gauge
Hot dipped Galvanised Iron Chain link
mesh 8 gauge - (4.0 mm) as per IS: 1 723
166 MAT-00890 BMT-F.24 2721-1979 - PVC Coated - 2"x2" (50 Sqm
mm x 50 mm) - 8 Gauge
Hot dipped Galvanised Iron Chain link
mesh 8 gauge - (4.0 mm) as per IS: 1 603
167 MAT-00891 BMT-F.25 2721-1979 - PVC Coated - 2½"x2½" (63 Sqm
mm x 63 mm) - 8 Gauge
Hot dipped Galvanised Iron Chain link
mesh 8 gauge - (4.0 mm) as per IS: 1 507
168 MAT-00892 BMT-F.26 2721-1979 - PVC Coated - 3"x3" (76 Sqm
mm x 76 mm) - 8 Gauge
Hot dipped Galvanised Iron Chain link
mesh 8 gauge - (4.0 mm) as per IS: 1 395
169 MAT-00893 BMT-F.27 2721-1979 - PVC Coated - 4"x4" (102 Sqm
mm x 102 mm) - 8 Gauge

III.SUB- SECTION STAINLESS STEEL MATERIALS

Stainless Steel Tubes, sections, plates,

170 MAT-00872 BMT-F.06 sheets & pipes of all sizes & diameters 1 Kg 462
for - 304 Grade
Stainless steel fly proof wire mesh of 1
171 MAT-00885 BMT-F.19 620
not less than 20 gauge Sqm
172 to BMT-F.32
180 ITEM DELETED
A to H

G.SECTION FIXTURES FOR DOORS & WINDOWS

I.SUB- SECTION TOWER BOLTS

181 Brass Tower Bolt-10 mm Bolt (IS:204)

MAT-00906 BMT-G.01 100 mm Long Each 180

182 Brass Tower Bolt-10 mm Bolt (IS:204)

MAT-00907 BMT-G.02 150 mm Long Each 288

183 Brass Tower Bolt-10 mm Bolt (IS:204)

MAT-00908 BMT-G.03 200 mm Long Each 382
Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

184 Brass Tower Bolt-10 mm Bolt (IS:204)

MAT-00909 BMT-G.04 250 mm Long Each 446

185 Brass Tower Bolt-10 mm Bolt (IS:204)

MAT-00910 BMT-G.05 300 mm Long Each 535

186 Aluminium Tower Bolt-10 mm Bolt

MAT-00911 BMT-G.06 (IS:204) 75 mm Long Each 60

187 Aluminium Tower Bolt-10 mm Bolt

MAT-00912 BMT-G.07 (IS:204) 100 mm Long Each 70

27
188 Aluminium Tower Bolt-10 mm Bolt
MAT-00913 BMT-G.08 (IS:204) 150 mm Long Each 90

189 Aluminium Tower Bolt-10 mm Bolt

MAT-00914 BMT-G.09 (IS:204) 200 mm Long Each 118

190 Aluminium Tower Bolt-10 mm Bolt

MAT-00915 BMT-G.10 (IS:204) 250 mm Long Each 142

191 Aluminium Tower Bolt-10 mm Bolt

MAT-00916 BMT-G.11 (IS:204) 300 mm Long Each 172

192 Aluminium Tower Bolt-10 mm Bolt

MAT-00917 BMT-G.12 (IS:204) 350 mm Long Each 365

193 Aluminium Tower Bolt-10 mm Bolt

MAT-00918 BMT-G.13 (IS:204) 450 mm Long Each 544

194 MS-Powder Coated Tower Bolt-10 mm

MAT-00919 BMT-G.14 Bolt (IS:204) 100 mm Long Each 30

195 MS-Powder Coated Tower Bolt-10 mm

MAT-00920 BMT-G.15 Bolt (IS:204) 150 mm Long Each 44

196 MS-Powder Coated Tower Bolt-10 mm

MAT-00921 BMT-G.16 Bolt (IS:204) 200 mm Long Each 60

197 MS-Powder Coated Tower Bolt-10 mm

MAT-00922 BMT-G.17 Bolt (IS:204) 250 mm Long Each 80

198 MS-Powder Coated Tower Bolt-10 mm

MAT-00923 BMT-G.18 Bolt (IS:204) 300 mm Long Each 100

II.SUB- SECTION HINGES

199 MAT-00924 BMT-G.19 Brass Butt hinges (IS:205)- 75 mm Long Each 83

200 Brass Butt hinges (IS:205)- 100 mm

MAT-00925 BMT-G.20 Long Each 240

201 Brass Butt hinges (IS:205)- 125 mm

MAT-00926 BMT-G.21 Long Each 285

202 Brass Butt hinges (IS:205)- 150 mm

MAT-00927 BMT-G.22 Long Each 365

203 Aluminium Butt hinges (IS:205)- 75 mm

MAT-00928 BMT-G.23 Long Each 90

204 Aluminium Butt hinges (IS:205)- 100

MAT-00929 BMT-G.24 mm Long Each 113

205 Aluminium Butt hinges (IS:205)- 125

MAT-00930 BMT-G.25 mm Long Each 135

GI Powder Coated Friction Stay hinges

BMT-G.88 of 10" Long for windows Each 235

GI Powder Coated Friction Stay hinges

BMT-G.89 of 10" Long for windows Each 335

Supplying SS 304 Grade Heavy Duty

BMT-G.90 pivot Hinges for windows Each 90

GI Powder Coated Friction stay hinges

BMT-G.91 of 10" Longfor windows Each 240
Continuous Piano Hinges Powder
coated Mild steelas per IS-3818 : 1992
BMT-G.92 of nominal size 25 mm (B) of thickness Each 38
0.8 to 1.0 mm

BMT-G.93 Box hinges for cup boards Each 48

28
 GI Powder Coated Friction stay hinges
BMT-G.94 of 14" Long for windows Each 335

Stainless Steel Butt hinges (IS:12817)-

BMT-G.95 75 mm Long Each 70

Stainless Steel Butt hinges (IS:12817)-

BMT-G.96 100 mm Long Each 105

Stainless Steel Butt hinges (IS:12817)-

BMT-G.97 125 mm Long Each 130

Stainless Steel Butt hinges (IS:12817)-

BMT-G.98 150 mm Long Each 168

Supplying SS 304 Grade Heavy Duty

BMT-G.99 pivot Hinges for windows Each 90
Labour Charges for removing and
BMT-G.100 refixing with complete servicing of the Sqm 513
MS windows
Supplying EPDM Gasket for windows
BMT-G.101 panels to the PPS shutter RM 35
Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

206 Aluminium Butt hinges (IS:205)- 150

MAT-00931 BMT-G.26 mm Long Each 145

207 MS-Powder Coated Butt hinges

MAT-00932 BMT-G.27 (IS:205)- 75 mm Long Each 12

208 MAT-00933 BMT- MS-Powder Coated Butt hinges Each 23

G.28 (IS:205)- 100 mm Long

209 MS-Powder Coated Butt hinges

MAT-00934 BMT-G.29 Each 35
(IS:205)- 125 mm Long

210 MS-Powder Coated Butt hinges

MAT-00935 BMT-G.30 (IS:205)- 150 mm Long Each 45
Providing and fixing stainless steel (SS-
304 grade) friction hinges to theside/top
hung uPVC windows, of approved
211 quality, with necessary stainless steel
BMT-G.80 screws etc. as per direction of Engineer-
in-charge.

212 MAT-05342 BMT-G.80.A 200 x 19 x 1.9 mm Each 315

213 MAT-05343 BMT-G.80.B 250 x 19 x 1.9 mm Each 359

214 MAT-05344 BMT-G.80.C 300 x 19 x 1.9 mm Each 386

215 MAT-05345 BMT-G.80.D 350 x 19 x 1.9 mm Each 521

216 MAT-05346 BMT-G.80.E 400 x 19 x 1.9 mm Each 552

III.SUB- SECTION DOOR HANDLES

217 Aluminium Door Handles (IS:208) 75

MAT-00936 BMT-G.31 mm Long Each 65

29
218 Aluminium Door Handles (IS:208) 100
MAT-00937 BMT-G.32 mm Long Each 75

219 Aluminium Door Handles (IS:208) 125

MAT-00938 BMT-G.33 mm Long Each 110

220 MAT-00939 BMT-G.34 Aluminium Door Handles (IS:208) Each 127

150mm Long

221 MS-Powder Coated Door Handles

MAT-00940 BMT-G.35 Each 41
(IS:208) 125 mm Long

222 MS-Powder Coated Door Handles

MAT-00941 BMT-G.36 Each 54
(IS:208) 150 mm Long

223 MAT-00963 BMT-G.58 Brass fancy handles 150 mm Each 353

224 MAT-00964 BMT-G.59 Brass fancy handles 200 mm Each 488

225 MAT-00965 BMT-G.60 Brass fancy handles 250 mm Each 876

226 MAT-00966 BMT-G.61 Brass fancy handles 300 mm Each 1070

227 MAT-00967 BMT-G.62 Brass fancy handles 450 mm Each 1738

228 Keyless lockset for toilet doors with CP

MAT-00977 BMT-G.72 Each 378
or PC knob handles (complete set)

30
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)

1 2 3 4 5

Knob handles

MAT-00978 Keyless lockset for toilet doors with brass

229 BMT-G.73 Each 776
knob handles

Providing and fixing casement handle

made of zinc alloyed (white powder
230 coated) for uPVC casement window with 237
MAT-05347 BMT-G.81 Each
necessary screws etc.complete.

BMT-G.107 MS-Powder Coated Door Handles Each

(IS:208) 150 mm Long 53

BMT-G.108 Stainless Steel Door Handles 100 mm Each

Long 111

BMT-G.109 Stainless Steel Door Handles 125 mm Each

Long 130

BMT-G.110 Stainless Steel Door Handles 150 mm Each

Long 159

BMT-G.111 Stainless Steel Door Handles 200 mm Each

Long 181

IV..SUB-SECTION ALDROPS

231 MAT-00942 BMT-G.37 Brass Aldrop (IS:2681) 300 mm long Each 1312

232 MAT-00943 BMT-G.38 Brass Aldrop (IS:2681) 350 mm long Each 2506

233 MAT-00944 BMT-G.39 Brass Aldrop (IS:2681) 450 mm long Each 3657

234 Aluminium Aldrop (IS:2681) 200 mm

MAT-00945 BMT-G.40 Each 291
long

235 Aluminium Aldrop (IS:2681) 250 mm

MAT-00946 BMT-G.41 Each 344
long

31
236 Aluminium Aldrop (IS:2681) 300 mm
MAT-00947 BMT-G.42 Each 350
long

237 MS-Powder Coated Aldrop (IS:2681)200

MAT-00948 BMT-G.43 Each 110
mm long

238 MS-Powder Coated Aldrop (IS:2681)250

MAT-00949 BMT-G.44 Each 142
mm long

239 MS-Powder Coated Aldrop (IS:2681)

MAT-00950 BMT-G.45 300 mm long Each 170

V.SUB-SECTION LATCHES

240 MAT-00953 BMT-G.48 Aluminium Flat Latches: 200 mm long Each 128

241 MAT-00954 BMT- Each 141

Aluminium Flat Latches: 250 mm long
G.49

242 MAT-00955 BMT-G.50 Aluminium Flat Latches: 300 mm long Each 164

243 MS-Powder Coated Flat Latches: 250

MAT-00956 BMT-G.51 Each 66
mm long

244 MS-Powder Coated Flat Latches: 300

MAT-00957 BMT-G.52 Each 84
mm long

245 MAT-00973 BMT-G.68 Brass latch heavy 300 mm Each 675

246 MAT-00974 BMT-G.69 Brass latch heavy 350 mm Each 806

247 MAT-00975 BMT-G.70 Brass latch heavy 450 mm Each 990

VI..SUB-SECTION DOOR CLOSURES

Providing and fixing Cast Iron Body

Bottle Type Hydraulic Door Closer (IS:
3564) with double speed adjustment, 957
248 MAT-00968 BMT-G.63 with necessary accessories and screws Each
etc. complete

32
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Providing and fixing Aluminium Extruded
Section Body Tubular Type Hydraulic Door
Closer (IS: 3564) with double speed
1173
adjustment with necessary accessories
249 MAT-00979 BMT-G.74 and screws etc. complete(Type-1: for Each
width of doors up to 700 mm)
Providing and fixing Aluminium Extruded
Section Body Tubular Type Hydraulic
Door Closer (IS: 3564) with double speed
1318
adjustment with necessary accessories Each
250 MAT-00980 BMT-G.75 and screws etc. complete(Type-2: for
width of doors 701 to 850 mm)
Providing and fixing Aluminium Extruded
Section Body Tubular Type Hydraulic
Door Closer (IS: 3564) with double speed
1503
adjustment with necessary accessories Each
251 MAT-00981 BMT-G.76 and screws etc. complete(Type-3: for
width of doors 851 to 1000 mm)

VII.SUB-SECTION FLOOR SPRINGS

Double action Stainless steel cover

252 plate and cast body iron floor spring (IS 2129
MAT-00969 BMT-G.64 6315- Table-1) Each
Double action Brass cover plate and
MAT-00970 BMT-G.65 cast brass body floor spring (IS 6315- Each 4217
253
Table-1)
Providing and fixing double action brass
cast hydraulic floor spring (IS:6315-Table
1) for doors including cost of cutting
floors as required, embedding in floors
4283
and S.S./ Brass cover plates with brass
254 Each
MAT-00982 BMT-G.77 pivot and single piece M.S. Sheet outer
box with slide plate etc. complete (door
weight capacity up to 130 kgs)
Providing and fixing double action brass
cast hydraulic floor spring (IS:6315-Table
1) for doors including cost of cutting
floors as required, embedding in floors
3045
and S.S.cover plates with brass pivot and
255 MAT-00983 BMT-G.78 single piece M.S. Sheet outer box with Each
slide plate etc. complete (door weight
capacity up to 80 kgs)
Providing of brass cast body Floor
Spring IS: 6315 sleek in size with the
S.S. / Brass Cover plates of Length 320
mm x Breadth 130 mm size along with 12344
Each
256 MAT-00984 BMT-G.79 the Top Patch, Bottom Patch, Door Lock
and Pivot with Double Cylinder etc.
complete for Heavy duty Glass doors.

VIII SUB-SECTION MORTICE LOCKS

Heavy duty mortise lock 6/7 levers

(IS:2209) with PC or CP handles 937
257 MAT-00971 BMT-G.66 Each
complete set

33
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

258 MAT-00972 BMT-G.67 Heavy duty mortise lock 6/7 levers Each 2246
(IS:2209) with brass heavy handles

IX.SUB- SECTION OTHER ACCESSORIES

259 MAT-00958 BMT-G.53 MS-Powder Coated - Door Stoppers Each 51

260 MAT-00962 BMT-G.57 Heavy duty Aluminium Door stopper Each 66
261 MAT-00951 BMT-G.46 Brass Door Stoppers Each 203
262 MAT-00976 BMT-G.71 Friction stay hinges for windows Each 111
263 MAT-00961 BMT- Each 139
Deluxe window stay Aluminium
G.56
264 MAT-00952 BMT-G.47 Brass Windows Stay Each 217

265 Supply & fixing drapery rods (25.4 mm)

MAT-00959 BMT-G.54 RM 130
1" x 21 G Powder coated with PVC rings
266 Supply & fixing drapery bracket - brass
MAT-00960 BMT-G.55 pair 479
powder coated
Providing and fixing zinc alloyed (white
powder coated) touch lock for
267 1851
MAT-05348 BMT-G.82 uPVC sliding window with necessary Each
screws etc. Complete
Providing and fixing steel roller for uPVC
sliding window with necessary 107
268 MAT-05349 BMT-G.83 Each
screws etc. complete.
Providing and fixing steel roller for uPVC
sliding door with necessary 171
269 MAT-05350 BMT-G.84 Each
screws etc. complete.
Providing and fixing steel (white power
coated) crescent lock for uPVC
270 sliding window/ door with necessary 188
MAT-05351 BMT-G.85 Each
screws etc. complete.
WATER PROOFING CHEMICALS & ADMIXTURES
Literature for usage / application of construction /
H.SECTION water proofing materials, epoxies etc, may be
obtained from manufacturers.
Anti corrosion CRPPC
(Corrosion Resistant) inhibitive
admixture. Note: The user
departments who ever are
289 MAT-01021 BMT-H.37 preparing the estimate, have to
satisfy themselves with the 365
performance and result of the
product before proposing the item.)

34
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Pre construction Anti termite is a
process in which chemical toxic to
subterrean termites is apply/ inject into
soil during early stage of building
Construction
2. Treatement of soil Beneath the
building and around the foundations
conduct and chemical use as per BIS - IS
6313 (Part -2) 2013 code specification &
CIB RC registered termiticide which
creates a continuouschemical barrier
beneath the building which kills or repels
terminates & impervious to tremite entry
Imidacloprid 30.5% SC (IS 63131)
dissolve 2.1 Ml/1 liter of water and apply
emulsion/solution @ 7.5 Litres/Square
meter (Sqm) of internal, external vertical 1 179
surface of the colums , plinth beams Sqm
(Back filling) walls and floor junction,
336 MAT-05352 BMT-H. 66 external perimeters, along reatining wall
@ 5.0 Liters/Sqm of the horizontalsurface
of basement top surface of the
basement filling below flooring bed
(Plinth) & @ 2.0 Litres/ Line meter at
expansion joints. The substructure of a
depth of 500mm around coulmns &
300mm deep around plinth beams,
basements & floor filling area including
excavation channel along the wall &
rodding etc. cost & Conveyance of all
materials to the site, cost of labour
for sparying, rodding etc. completefor
furnished item of work as per the
approval of the Engineer-in-charge

337 BMT-H. 67 ITEM DELETED

I.SUB- SECTION REPAIRING AND TREATMENTWORKS

BMT-H.68 SURFACE PREPARATION

Cleaning of the surface : For

Waterproofing treatment

( If the surface is sound & hard Condition

) The surface must be cleanand sound
BMT- duly removing of exisiting tretaments
338 Sqm 74
H.68.A clean from dirt, dust and other
MAT-05353 contaminations by power grinding wire
brushing , air blower & jetwater cleaing.

35
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

( If the surface is detoriated or damage

/ existing tiles or block laying) Chipping
with pneumatic power chiseling
339 equipment and until to ahcieve the hard Sqm 167
BMT-H.68.B mother concrete surface. Duly removing
MAT-05354 of debris, cleaning of the surface from
dirt, dust and other foreignmatters &
water jet cleaning.

if the surface has existing

damaged bituminous felt / APP
membrane. Chipping and
removing of existing bituminous
tarfelt / membrane with chiseling
340 BMT- equipments, grinding / wire Sqm 117
H.68.C brusing the surface duly
MAT-05355 removing the felt completely.
Duly removing of debris,
cleaning of the surface from dirt,
dust and other foreign matters &
waterjet cleaning.

SPECIALISED CHEMICAL
WATERPROOFING TREATMENTSFOR
TERRACE
WHERVER FLOORING
SURFACE ISHAVING MAJOR
HAIR LINE CRACKS
DEVELOPED, SEVERE
LEAKAGES

TAKEN PLACE AND REQUIRED TO

REDUCE THE ROOM
TEMPERATURES - SELF
ASSESSED TREATMENTS TO
IDENTIIFY EACH LAYER OF
TREATMENTS : REFER THE RATES
FOR CLEANING AND CRACK
FILLING UNDER THE HEAD OF THE
WORKS Item Code BMT-H.68
SURFACE PREPARATION SUB
HEADING : CLEANING OF THE
SURFACE FOR WATERPROOFING
TREATMENT.

36
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

SPECIALISED FIVE LAYER SYSTEM

OF WATERPROOFING TREATMENT
TO THE TERRACE

a). Ist Layer Black coloured chemcial

treatment : Providng and application of
one coat of High bonding, flexible
bituminous polyurethane blended
bituminous coating with –5 systems
Confiming to ASTM-G 154 - 2000 or
equavalent Ist Layer diluting with water
at 1 : 1 ratio as a primer coatat a
consumption of 200ml per Sqm.
b). IInd Layer : Providing and laying of
Fibre Mesh 40 GSM, with 1 Mtr width
and 50mm overlap on the primed
surface.
c). IIIrd Layer Grey coloured coating :
341 (a) BMT-H.69 Providing and application of one coat Sqm 609
MAT-05356
of Acrylic rubberized elastomeric
flexible waterproof grey coating with –5
systems ASTM-C 836or equavalent or
equavalent diluting with 50% of water at
a consumption of 400ml per Sqm.
d) IVth Layer white colured coating :
Providing and application of one coat of
High solid, cold applied, Fibre reinforced
acrylic elastomeric waterproof
membrane off white coating –Roofcare
prc 5 systems Confiming to ASTM-G
154 -2000 or equavalent coating (add
the water upto 200ml ) (Consumption of
350ml per Sqm ).
e) Vth Layer super white reflective
coating : Application of one coat of
100% pure acrylic solar reflective pure
white coating with

37
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
systems Confirming to ASTM -C 297 or
equavalent solar refective coating
diluting with 20% of water (Consumption
of 300ml per Sqm ).
Note : THE ABOVE TREATMENT WILL
BE GUARANTEED FOR 5 YEARS
SPECIALISED FIVE LAYER SYSTEM
OF WATERPROOFING TREATMENT
TO THE TERRACE

Providing and laying five layers

waterproofing cum heat reflective
treatment over the old / new roof slab/
terrace, all as directed by Department
Engineer-in-charge with the following
specification and should be complain
with the following technical parameters
for the system - Density: 1.3 Gm/cc,
Solids content: 68% ± 2% by weight,
Elongation at break ASTM D 638: 200%
(for the system), Adhesion to substrate
ASTM D 4541: >1.5 N/mm2, Water
penetration DIN 1048: no leak at 7 bars,
Tear resistance ASTM D 1004-76:
17N/mm2, Tensile strength ASTM D
412- 87:6.0N/mm2

a ) First Layer - Supply and Apply

penetrative cum bonding primer as base
primer cum sealer coat using modified
with water and cement at the ratio 2:1:3
BMT-H.69 (MIXPRIME AC 100 : water : cement) by
341 (b) Sq.m 609
(b) volume with a slow speed mixer
machine. This compound shall be
applied with sufficient thickness to cover
the holes/pores/cracks @ 1.000 Liter /
SQM
SQM) and the raw primer should be
complain with ASTM 4541 and the Solid
content 49% +2%

b ) Second Layer – Supply and apply of

2 x 2 mm welded with alkaline resistant
coated
/ non-woven 40 Gsm verging fiber mesh
MIXMAT GFM 50 or equivalent for a
minimum over lap of 100 mm embedded
in the primer coat

c ) Third Layer - Supply and apply of

bonding cum water tight acrylic high
viscous white primer equivalent @ 0.250
Kg / SQM (dilution or modification not
recommended) should be complain
withDensity: 1.1gm/cc, Solids content:
50 % ± 2% by weight, Elongation at
break ASTM D 638: >300%, Adhesion
to substrate ASTM D 4541: >1 N/mm2,
38
 Tensile strength ASTM D 638: >1.5
N/mm2, Reduction in chloride ion
ingress: 94%@28 days

d ) Fourth Layer – Supply and apply of

high elastomeric acrylic waterproofing
cum weather proof high viscous white
liquid membrane equivalent @ 0.500
Kg / SQM (dilution or modification not
recommended) should be complain with
Density: 1.30 gm/cc , Solids content:
68% ± 2% by weight, Elongation at
break ASTM D 638: 400%, Tensile
strength ASTM D 412: 1.8N/mm2,
Adhesion to substrate ASTM D 4541: >1
N/mm2, Water penetration DIN 1048: no
leak at 7 bars (+ve side), Water vapor
transmission ASTM E96: 19g/m2/day,
Crack bridging ASTM C836: No cracks
up to 2mm thick.

E ) Fifth Layer - Supply and apply of

fiber reinforced flexible high bride pure
acrylic modified waterproofing cum heat
reflective high viscous white liquid
membrane equivalent @
0.500 Kg / SQM (dilution or modification
not recommended)Density: 1.3 gm/cc
Solids content: 68% ± 2% by weight,
Elongation at break ASTM D 638: 200%
, Adhesion to substrate ASTM D 4541:
>1.3 N/mm2, Water penetration DIN
1048: no leak at 7 bars, Tear resistance
ASTM D 1004-76: 15N/mm2 , Tensile
strength ATM D 412-87: 3.0N/mm2,
Solar reflectance – ASTM G173 – 92 %,
Water vapor transmission ASTM E 96 –
19 Kg / M2 / day.
Note: -
1 ) No dilution or modification
recommended for item No.b,c,d
and e .
2 ) All materials should be procured as
per the consumption with respect of
the work order.
3 ) The application should be carried
out by an approved agency.
) The contractor should provide 5 years
material warrantee from the
Manufacturer and 5 year warrantee from
the applicator or combined

39
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
WHEREVER FLOORING SURFACE IS
HAVING HAIR LINE CRACKS
DEVELOPED, SEVERE LEAKAGES
AND FOUND VERY SLIGHTLY
MORTAR DEBONDED WITH
ORIGINAL SLAB - TAKEN PLACE :
REFER THE RATES FOR CLEANING
AND CRACK FILLING UNDER THE
HEAD OF THE WORKS RAINSEAL
FRC SPECIALISED HIGH STRENGTH
FIBRE REINFORCED ACRYLIC
ELASTOMERIC AND HEAT
RESISTANT LIQUID MEMBRANE
COATING CHEMICALS Confirmed
ASTM C 836/89A & ASTMC 297 FOR
TERRACE.

SPECIALISED HIGH STRENGTH

CELLULOSE FIBRE REINFORCED
ACRYLIC ELASTOMERIC LIQUID
MEMBRANE COATING FOR
TERRACE :
a). Providing and application of one
coat of High Solid, Cold applied Acrylic
Elastomeric Liquid Membrane Coating /
diluting with water at 1 : 0.50 ratio as a
primer coat at a consumption of 200ml
342 MAT-05357 per Sqm.
BMT-H.70 Sqm 580
b). Providing and laying of Non woven
polyster reinforced fibre mesh of 40
GSM, with 1 Mtr width and 50mm
overlap on the primed surface.

c) Providing and application of one coat

of High strength cellulose fibre
reinforced Acrylic Elastomeric Liquid
Membrane coating with diluting with
water at 20% as a base coat application
at a consumption of400ml per Sqm.

WHERVER FLOORING SURFACE IS

HAVING HAIR LINE CRACKS
DEVELOPED, SEVERE LEAKAGES
AND FOUND SOME PLACES
MORTAR DEBONDED WITH
ORGINAL SLAB - TAKEN PLACE :

40
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
REFER THE RATES FOR CLEANING
AND CRACK FILLING UNDER THE
HEAD OF THE WORKS BMT-H.68 ©
and BMT-H.83 chemical complies
with ASTM C 297.

SPECIALISED HIGH PERFORMANCE

ACRYLIC POLYMER MODIFIED
ELASTOMERIC CEMENTITIOUS
WATERPROOF COATING TO THE
TERRACE

a). Providing and application of one

coat of High performance Acrylate
penetrative water barrier primer –
)diluting with water at 1 : 0.50 ratio as a
primer coat at a consumption of 200ml
per Sqm.

b). Providing and laying of Non woven

polyster reinforced fibre mesh of 40
GSM, with 1 Mtr width and 50mm
overlap on the primed surface.
343(a) MAT-05358 BMT-H.71 Sqm 541
c) Providing and application of one coat
of Two part system of high performance
acrylic polymer modified elastomeric
cementitious waterproof coating
mixing of powder and liquid as per
packing at 1:2 ratio. (add the water upto
200ml ) at aconsumption rate of 300
Grams mix.

d). Providing and application of one

coat of Two parts system fibre
Reinforced Acrylic Cementitious
Coatings with
mixing of powder and liquid as per
packing at 1:2 ratio (add the water upto
200ml ) at a consumption rate of 300
Grams mix.

41
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
SPECIALISED HIGH PERFORMANCE
ACRYLIC POLYMER MODIFIED
ELASTOMERIC CEMENTITIOUS
WATERPROOFING SYSTEM
COATING TO THE WET AREA /
TOILET / BATH ROOM .
a ) First Layer - Supply and Apply
penetrative cum bonding primer as
base primer cum sealer coat using
equivalent modified with water and
cement at the ratio 2:1:3 (MIXPRIME
AC 100 : water : cement) by volume
with a slow speed mixer machine. This
compound shall be applied with
sufficient thickness to cover the
holes/pores/cracks @ 1.000 Liter / SQM
and the raw primer should be
complain with ASTM 4541 and the
Solid content 49% +2%

b ) Second Layer – Supply and apply of

2 x 2 mm welded with alkaline resistant
coated
/ non-woven 40 Gsm verging fiber
mesh or equivalent for a minimum over
lap of 100 mm embedded in the primer
coat
BMT-
343(b) Sq.m 542
H.71(b)
c ) Third Layer - Supply and apply of
first coat of two component (Powder +
Liquid) system of high performance
acrylic polymer modified elastomeric
cementitious waterproofing system or
equivalent @ 1.000 Kg / SQM ( mix the
powder and liquid with the help of a
slow speed mixer for a period of 2 to 3
minutes up to get a homogeneous mix-
dilution or modification not
recommended) should be complain with
BS 1881 Part 5 1983 (ISAT
476 Part 6), DIN 1048 Part 5 1991, BSEN
12390-8 2000, ASTM D 412-92

d ) Fourth Layer –Supply and apply of

second coat of two component
(Powder + Liquid) system of high
performance acrylic polymer modified
elastomeric cementitious waterproofing
system equivalent @ 1.000 Kg / SQM (
mix the powder and liquid with the help
of a slow speed mixer for a period of 2
to 3 minutes up to get a homogeneous
mix- dilution or modification not
recommended) should be complain
with BS 1881 Part 5 1983 (ISAT

42
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
476 Part 6), DIN 1048 Part 5 1991, BSEN
12390-8 2000, ASTM D 412-92.
Note: -
1 ) No dilution or modification
recommended for item Nos.b,c,d
and e .
2 ) All materials should be procured as
per the consumption with respect of
the work order.
3 ) The application should be carried
out by an approved agency.
4 ) The contractor should provide 5
years material warrantee from the
Manufacturer and 5 year warrantee
from the applicator or combined
WHERVER FLOORING SURFACE IS
HAVING MAJOR HAIR LINE CRACKS
DEVELOPED, SEVERE LEAKAGES
TAKEN PLACE AND REQUIRED TO
REDUCE THE ROOM
344 TEMPERATURES - SELF ASSESSED Sqm 312
TREATMENTS TO IDENTIIFY EACH
MAT-05359 LAYER OF TREATMENTS : REFER
THE RATES FOR CLEANING AND
CRACK FILLING UNDER THE HEAD
OF THE WORKS

a). Providng and application of one coat

of High bonding, flexible bituminous
polyurethane blended black coating with
Complies with ASTM 836 - DN 1048
BMT-H.72 diluting with water at 1 : 1 ratio as a
primer coat at a consumption of 200ml
per Sqm.
b). Providing and laying of Non woven
GEO Fabric 40 GSM,
with 1 Mtr width and 50mm overlap
on the primed surface.
c). Providing and application of one
coat of Acrylic rubberized elastomeric
flexible waterproof grey coating with –
ASTM G 154 - 2000 diluting with 50% of
water at aconsumption of 400ml per
Sqm.
d) Providing and application of one coat
of High solid, cold applied, Fibre
reinforced acrylic elastomeric waterproof
membrane off white coating –

43
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

Complies with ASTM C 297 (add the

water upto 200ml ) (Consumption of
350ml per Sqm ).
e) Application of one coat of 100%
pure acrylic solar reflective pure white
coating with - ROOFCARE COOL
(Insulator) / POWER n COOL (EBT) /
BRUSHBOND COOL COAT
(Fosroc)/ZORISHIELD XL (PMCC) /
SIKA COOL COAT (Sika)
//WATERSHIELD COOL COAT diluting
with 20% of water ( Consumption of
300ml per Sqm ).

FOR WATERPROOFING OF
PORTABLE WATER TANKS /
RESERVOIRS / SUMP/ TERRACE /
SIDE WALLS :
REFER THE RATES FOR CLEANING
AND CRACK FILLING UNDER THE
HEAD OF THE WORKS
SPECIALISED ACRYLIC
CEMENTITIOUS ELASTOMERIC
WATERPROOF COATING
TREATMENT Complies with ASTM C
297 :
345 Sqm 401
MAT-05360 Providing and Application of two coats
BMT-H.73 of Acrylic cementitious elastomeric
waterproof coating with- Roofcoat or
equavalent like high elastomeric acrylic
polymer modified cementiitious
waterproof system.
FOR WATERPROOFING OF
TERRACE / SIDE WALLS :
REFER THE RATES FOR CLEANING
AND CRACK FILLING UNDER THE
HEAD OF THE WORKS

SPECIALISED ACRYLIC
CEMENTITIOUS ELASTOMERIC
WATERPROOF COATING
TREATMENT Complies with ASTM C
346 297 : Sqm 449
MAT-05361 BMT-H.74
Providing and Application of two coats
of Acrylic cementitious elastomeric
waterproof coating with -

44
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
WATERSHIELD COAT PC like high
elastomeric acrylic polymer modified
cementiitious waterproof system.
WHERVER HIGH FLEXIBLE HIGH
BONDED NECESSARY FOR
WATERPROOFING OF TERRACE /
SLOPED ROOFS / ACC SHEETS etc.,
FOR A GUARANTEE OF 5 YEARS
REFER THE RATES FOR CLEANING
AND CRACK FILLING UNDER THE
HEAD OF THE WORKS

SPECIALISED HIGH SOLID, COLD

APPLIED, ACRYLIC WATERPROOF
COATING TO THE EXTERNAL WALLS
Acrylic elastomeric waterproof exterior
coatings Complies with ASTM C 836 /
89 A :
347 Sqm 449
MAT-05362 BMT-H.75 Providing and application of two coats of
High solid, cold applied, Acrylic
Elastomeric Liquid Membrane Coating
with –
20% of water mixing with required
colour stainers.

WHEREVER REQUIRED FOR

WATERPROOFING OF TERRACE /
SLOPED ROOFS / ACC SHEETS etc.,
FOR A GUARANTEE OF 3 YEARS
REFER THE RATES FOR CLEANING
AND CRACK FILLING UNDER THE
HEAD OF THE WORKS

SPECIALISED HIGH BONDING,

FLEXIBLE BITUMINOUS
POLYURETHANE BLENDED
BITUMINOUS COATING Complies
with ASTM C 836 - DN 1048 :
348 MAT-05363 BMT-H.76 Sqm 411
Providng and application of two
coats of High bonding, flexible
bituminous polyurethane blended
bituminous coating with diluting with
20% of water.

45
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
EXPANSION JOINT TREATMENT :

Prepration of the surface : For existing

expansion joint treatment :

Chipping of the exisiting treatments

over the expansion joints concrete /
brick masonry with pneumatic power
chiseling equipment and until to
349 RMT 291
MAT-05364 BMT-H.77 ahcieve the hard mother concrete
surface. Chipping and removing of
existing bituminous mastic boad upto
25mm deep.
Duly removing of debris, cleaning of the
surface from dirt, dust and other foreign
matters

SPECIALISED POLYSULPHIDE
SEALANT TREATMENT TO THE
EXPANSION JOINTS ON TERRACE :
(Size : 25mm x 12mm)

Application of one coat of-High

performance specially designed SBR
latex polymer based bonding agent– or
equivalent mixing with cement as per
manufacturers c]. Providing and
application of Acrylic Polymer modified
reinstatement concrete/mortar
admixture with -
350 MAT-05365 BMT-H.78 to finish the damaged edges of joint and RMT 755
making the groove. d]. Providing and
fixing of masking tape on top of the joint
both sides. e]. Providing and fixing of
Back up support material of
Polyethelene foam to leave the depth
of 12mm on the joint. f]. Providing and
application of one coat of polysulphide
primer with – Polysulphide primer on
inner edge on joints. g]. Providing and
application of Two part Polysulphide
sealant to a width of 25mm and 12mm
depth with -

46
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

with BS 4254 - 83 or equavalent with

putty knife and neat finish. h]. Removing
of masking tape and providing and
application of two coats of Acrylic
elastomeric cementitious coating with -
ROOFSEAL PS (Armstrong ) / POWER
n SEAL PS (EBT) /NITOSEAL PS 200
(Fosroc)/ ZORISEAL PS (PMCC) /
SIKA POLYSULPHIDE (Sika) /
WATERSHIELD PS

FOR ARRESTING WATER FLOW

LEAKAGES, LEAKAGES OF
CONSTRUCTION JOINTS OF
RESERVOIRS / PUMP ROOMS /
POWER HOUSE / PENSTOCK /
CANAL DUCTS AND OTHER WATER
RETAINING STRUCTURES
EXECUTION IN THE PRESENCE OF
WATER.

LABOUR CHARGES FOR

SPECIALISED EXPANSIVE ACQUA–
REACTIVE WATER BARRIER
GROUTING

(1). Drilling of holes with Electrical

Drilling machine up to the required
depth i.e., (12mm to 14mm dia sized
holes)

(2). Fixing of pressure retaining

aluminum / steel packers fixing with
351 MAT-05366 BMT-H.79 Each 289
Instant setting leakproof plugging
compound

(3). Grouting of holes with Air

Compressed Injection equipment with
single component aliphatic
polyurethane grout compound-
(4).
(5). After removing the pipes sealing of
the holes with polymer putty –

47
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

with Cement.

Supply of chemicals for specialised

MAT-05367 expansive aqua reactive water barrier
352 BMT-H.80 Kg 1753
grout -

FOR STRENTHENING AND SEAL THE

POROSITY OF THE CONCRETE TO
ARREST THE LEAKAGES,
DAMPNESS , LEAKAGES OF
CONSTRUCTION JOINTS
FOR TERRACE / CEILING / RCC
RETAINING WALLS / BASEMENT
FLOORINGS / WATER TANKS /
RESERVOIRS / TOILETS etc.,

SPECIALISED INJECTION GROUTING

WITH CEMENT AND FREE FLOW
ADDITIVES :
a]. Drilling of holes with power drilling
machine to the required depth [12mm to
14mm dia holes]
b]. Fixing of Rubber Nozzles with
cement and quick setting, Rapid
hardening compound putty -
Rapidstrong qs or equivalent.
353 MAT-05368 BMT-H.81 c]. Grouting of holes with 140 PSI Grout Each 173
pump with cement slurry mixing with
Specialized Free flow, Non-shrink Grout
additive -
250 Grams per bag of 50 Kgs
Cement add required water to make
slurry form.
d]. After completion of grouting,
Remove the Rubber nozzles
e]. Later sealing of the hole with
polymer cement putty .

FOR STRENTHENING AND SEAL THE

POROSITY OF THE CONCRETE TO
ARREST THE LEAKAGES,
DAMPNESS , LEAKAGES OF

48
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit
SoR 2024-
25 (Rs.)
1 2 3 4 5
ONSTRUCTION JOINTS :

( FOR TERRACE /CEILING / RCC

RETAINING WALLS / BASEDMENT
FLOORINGS / WATER TANKS /
RESERVOIRS / TOILETS etc., )

SPECIALISED INJECTION GROUTING

WITH CEMENT AND
CRYSTALLIZATION ADMIXTURES :
a]. Drilling of holes with power
drilling machine to the required depth
[12mm to 14mm dia holes]
b]. Fixing of Rubber Nozzles with
cement and quick setting, Rapid
hardening compound putty
Rapidstrong qs or equavalent
354 c]. Grouting of holes with 140 PSI Each 262
MAT-05369 BMT-H.82 Grout pump with cement slurry
mixing with Specialized
crystallization compound-Roofex gp
or equavalent @ 5% by weight of
cement.
d]. After completion of grouting,
Remove the Rubber nozzles
e]. Later sealing of the hole with
polymer cement putty

CRACKS AT TERRACE / BEAM &

WALLS JUNCTIONS - SEALING THE
JOINTS WITH POLYURETHANE
SEALANT :

SPECIALISED POLYURETHANE
SEALANT TREATMENT :
a). Making ‘’U” Groove (width and
355 MAT-05370 BMT-H.83 RMT 383
depth of 6mm x 6mm)
b). Filling of the groove with
polyurethane sealant

CRACKS AT INTERNAL / EXTERNAL

WALLS - SEALING THE CRACKS
WITH ACRYLIC CAULKING
COMPOUND

49
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit
SoR 2024-
25 (Rs.)
1 2 3 4 5
SPECIALISED ACRYLIC CAULKING
SEALANT TREATMENT :
a). Making ‘’U” Groove (width and
356 MAT-05371 BMT-H.84 depth of 6mm x 6mm) RMT 211
b). Filling of the groove with Acrylic
caulking compound

Providing and fixing of expansion joint

system related with floor location: The
joints system will be of extruded
aluminum base members, self aligning /
self centering arrangement and support
plates etc. as per ASTM B221-02. The
system shall be such that it provides floor
to floor /floor to wall expansion control
system for various vertical localtion in
load application areas that
accommodates multi directional seismic
movement without stress to it’s
components. System shall consist of
metal profiles with a universal aluminium
base member designed to accommodate
various project conditions and finish floor
treatments. The cover plate shall be
357 BMT-H.128 designed of width and thickness required RMT 7549
to satisfy projects movement and loading
requirements and secured to base
members by utilizing manufacturer’s pre-
engineered self-centering arrangement
that freely rotates / moves in all
directions. The Self – centering
arrangement shall exhibit circular sphere
ends that lock and slide inside the
corresponding aluminum extrusion cavity
to allow freedom of movement and flexure
in all directions including vertical
displacement. Provision of Moisture
Barrier Membrane in the Joint System to
have watertight joint is mandatory
requirement all as per the manufactures
design (Material shall confirm to ASTM
6063.) (Floor Joint of 200 mm gap)
Providing and fixing of expansion joint
system related with wall joint (internal/
external) location: The joints shall be of
extruded aluminum base members, self
aligning / centering arrangement and
support plates as per ASTM B221- 02.
358 BMT-H.129 The material shall be such that it provides RMT 5159
an Expansion Joints system suitable for
vertical wall to wall / wall to corner
application, both new and existing
construction in buildings &

Basic
Description of item Rate for
S. No CFMS code Item Code Unit
SoR 2024-
25 (Rs.)
50
 1 2 3 4 5
complexes with no slipping down
tendency amongst the components of the
Joint System. The Joint System shall
utilize light weight aluminium profiles
exhibiting minimal exposed aluminium
surfaces mechanically snap locking the
multi cellular to facilitate movement.
(Material shall confirm to ASTM 6063.)
(Wall Joint of 200 mm gap)

Providing and fixing of expansion joint

system of approved make and
manufactures for various roof locations:
The joints shall be of extruded aluminium
base members with self aligning and self
centering arragement support plates
asper ASTM B221-02. The system shall
be such that it provides water tight roof to
roof / roof to corner joint cover expansion
control system that is capable of
accommodating multi directional seismic
movement without stress to its
359 components. System shall consist of
metal profile that incorporates a universal
aluminium base member designed to
accommodate various project conditions
and roof treatments. The cover plate shall
be designed of width and thickness
required to satisfy movement and loading
requirements and secured to base
members by utilizing manufacturer’s pre-
engineered self-centering arrangement
that freely rotates / moves in all directions.

The Self centering arrangement shall

exhibit circular sphere ends that lock and
slide inside the corresponding aluminum
extrusion cavity to allow freedom of
movement and flexure in all directions
including vertical displacement. The Joint
System shall resists damage or
deterioration from the impact of falling ice,
exposure to UV, airborne contaminants
and occasional foot traffic from
maintenance personnel. Provision of
Moisture Barrier Membrane in the Joint
System to have water tight joint is
mandatory requirement. Material shall
confirm to ASTM 6063.

360 BMT-H.130 Roof Joint of 200 mm gap RMT 5600

Roof Joint of 250 mm gap

361 BMT-H.131 RMT 7600

Basic Rate
Item for SoR
S. No CFMS code Description of item Unit
Code 2024-25
(Rs.)

1 2 3 4 5
51
 II.SUB- INTERGRAL WATERPROOFING
SECTION COMPOUND
Integral Cement Waterproofing
Admixture for Concrete Slabs and
BMT- 1 Ltr 221
362 MAT-05372 mortar plastering works. ( Dosage :
H.85
100ml Per bag of 50 Kgs Cement)
Complies with I.S. 2645-2003
Liquid Concentrated Micronized
Cement waterproofing
Compound for Slabs, mortar
BMT- plastering and water retained 1 Ltr 139
363 MAT-05373 H.86 structures. (Dosage : 500ml
per bag of 50 Kgs Cement )
Complies with I.S. 2645-2003
PLASTICIZERS AND WATER
II.SUB- REDUCING AGENT
SECTION

Concrete plasticizers and Water

reducing admixture (not air entraining
agent ) (Dosage : 15-20ml per bag of
50 Kgs Cement )- Complies with I.S.
9103-99
364 BMT-H.87 Ideal to use as concrete admixture for 1 Ltr 233
MAT-05374
workability retension of slump and
control water cement ratio of M 20 +
grade concrete for slabs /roads works
and other concrete works

SUPER PLASTICIZERS AND WATER

REDUCING CONCRETE ADMIXTURES

Super plasticizer and water reducing

concrete admixture base on Ligno
Sulphide Complies with IS 9103 & ASTM
C 494 (Dosage : 200ml to 300mlper bag
365 BMT-H.88 of 50 Kgs Cement ) 1 Ltr 86
MAT-05375
For M25 + grade concrete works like
Road Projects / Canal linings/ Dams /
Reservoirs / Building’s concrete works.

High performance super plasticizer and

water reducing admixture based on
366 MAT-05376 BMT-H.89 1 Kg 89
lignosulphide and napthalene blended

52
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Complies with 9103/4-99 (Dosage :
300ml to 500ml Per Bag of 50 Kgs
Cement )
For M30+ grade concrete works like
Road Projects / Canal linings/ Dams /
Reservoirs / Building’s concrete works.

High performance super plasticizer and

water reducing admixture based on
napthalene blended
Complies with 9103/4-99 (Dosage :
367 300ml to 500ml Per Bag of 50 Kgs 1 Kg 95
MAT-05377 BMT-H.90 Cement )
For M40+ grade concrete Works like
road projects / Canal linings / Dams /
Reservoirs / Building’s concrete works

SELF COMPACTING CONCRETE

ADMIXTURES
High strength super plasticizers and
water reducing agent based on
polycarboxylic technology. Complies
368 BMT-H.91 with IS 9103/ASTM C 494 ( 300ml to 1 1 Kg 132
MAT-05378
Ltr Per Bag of 50 Kgs Cement )
For M-40+ + concrete structures in
coastal areas, for early high strength.
RETARDING ADMIXTURES

Super plasticizer, high range water

reducing and retarding concrete
admixture of napthalene blended.
( Complies with 9103-99 ) (Dosage : 100
369 MAT-05379 1 Kg
BMT-H.92 300ml to 500ml Per bag of 50 Kgs
Cement )
For delaying of initial setting time and M
40+ Grade concrete works.

CORROSION INHIBITOR ADMIXTURE

High strength super plasticizer and
corrosion inhibitor for concrete
(Complies with IS 9103-99 & EN 1504-9
Method 11.3) (Dosage : 200ml to 500ml
Per Bag of 50 Kgs Cement)
For Concreting under extreme 115
370 1 Kg
MAT-05380 corrosion effected areas / coastal areas
BMT-H.93 / industrial constructions to protect
the steel reinforcement.
Anti Corrosion and leak proof Crack
Proof,Water Proof, Concrete Hardener
Admixture liquid.
AIR ENTRAINING AGENT
371 MAT-05381 BMT-H.94 Hi-power concentrated Air Entraining, 1 Ltr 190

53
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

Plasticizing & Water reducing compound

Complies with IS 9103-99 & ASTM C
260 (Dosage 20ml per bag of 50 Kgs
Cement)
Ideal to use for the construction of
Bridges, Barrages, Dams, Tunnels,
Piles, Foundations, Towers etc.,

Two component High Power Polyester

Resin Anchor Grout Compound
Complies with ASTM-827 /SNF.CRDC-
621 372
372 1 Kg
MAT-05382 BMT-H.95 (Yield 0.5 Ltrs / 1 Kg Pack ) For
Anchoring / fix the steel bars into the
rocks, concrete for foundations,
extension of concrete.

IV. SUB-SECTION GROUTS

Non-shrink Free flow high strength

precision grout
Complies with BS 1881 Part 1161983. 42
373 BMT-H.96 1 Kg
MAT-05383 For machinery / thin sections of
concrete
joints Filling.

Low viscosity Epoxy resin injection

grout -Two parts system. Complies
with BS 6920 / ASTM 881-78 (Density 919
374 BMT-H.97 1 Kg
MAT-05384 1.07 Kg Per Ltr )
For Structural strengthening, filling of
honey comb / voids in the concrete.
Non-shrink, free flow, high strength
grout admixture
375 BMT-H.98 Dosage : 250 Grams Per Bag of 50 Kgs 1 Kg 70
MAT-05385
Cement.
(Complies with B.S.1881 Part 1161983 )
High perfomrance, High build expansive
376 MAT-05386 BMT-H.99 acqua-reactive water barrier 1 Kg 1742
polyurethane grout.

V. SUB- SECTION BONDING AGENTS

Acrylic based bonding adhesive (Mix:

1:1 ratio of cement )
Coverage : 50 SFT/Ltr/Coat Depending 177
377 BMT-H.100 1 Ltr
MAT-05387 on the substrate
On terrace old concrete to new mortar /
screed.

Styrene butadiene rubber based 516

378 MAT-05388 BMT-H.101 1 Ltr
bonding agent for mortar/ concrete

54
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
(Mix: 1:1 ratio of cement )
For ceiling / concrete repairs and
bonding.
Coverage : 50 SFT/Ltr/Coat Depending
on the substrate

Structural element concrete bonding

agent old to new concrete epoxy
bonding agent : (Two Parts system of
379 Epoxy Bonding adhesive ) Complies 1 Kg 1001
MAT-05389 BMT-H.102 with ASTM-C 881 Coverage : 20 – 25
SFT / Kg /Coat For Structural concrete
repairs / bonding.

VI. SUB-SECTION SEALANTS

Single component polyurethane sealant

(Gungrade/ Pour Grade) Complis with :
ASTM C 920 -95 Type S / Grade NS,
Class 25, and BS ; 5212
380 Ideal to use for Filling of runways / 600ml 556
buildings, expansion joints, construction
MAT-05390 BMT-H.103 joints, Terrace Cracks, Sealing joints at
doors, windows, facades, frames, crack
etc.,
Two part polysulphide sealant (Gun /
Pour Grade)
Complies with ASTM C 920 - 95 / DIN
381 18549 TT - 5 - 00227 E/BS 4254 -83 1 Kg 469
MAT-05391 BMT-H.104 Ideal to use for Expansion /
construction joints of runways, buildings
etc.,

Acrylic Latex Caulking Compound

Complies ASTM-C-834-91
382 Ideal for exterior and interior crack filling 1 Kg 365
MAT-05392 BMT-H.105 works, Excellent bonding strength to
adjoining surface.

PROTECTIVE WATERPROOF COATINGS / CEMENT BASED

VII. SUB-SECTION COATINGS :

Two component sysem High durable

cementitious acrylic based
waterproofing systems : Complies with
ASTM D 4541 / BS EN 12390 / DN 1048 163
383
( 2 to 3 Sqm in two coats ) 1 Ltr
MAT-05393 BMT-H.106 For Terrace, Water Tanks, Walls
Waterproof Coatings of Two Part
System.

384 MAT-05394 BMT-H.107 Acrylic Polymer Elastomeric 1 Ltr 404

55
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Cementitious Waterproof Coatings
Surface treatments for Terrace, Water
Tanks, Walls, Reservoirs Waterproofing
Coatings.Complies with ASTM D4541 /
BS EN 12390. (Coverage :50 to 60 SFT
/ Ltr / coat)

PURE ACRYLIC ELASTOMERICCOATINGS

Single component, High solid, cold

applied, Acrylic elastomeric waterproof
membrane coating Complies with
ASTM C 836 / 89A & ASTM C 297
(Coverage : 50 to 60 SFT Per/Ltr/Coat)
Wherever highly flexible, crack 492
385 1 Ltr
MAT-05395 BMT-H.108 Bridging,waterproofing required for
Terrace, Walls Highly Flexible
Waterproof Liquid Membrane pure
Acrylic Coatings.
(for brush / spray application add 20%
water per Ltr )
Rubberized elastomeric flexible
waterproof coating
Complies with ASTM 836 / 89 A &
386 ASTM C 297 1 Ltr 345
MAT-05396 BMT-H.109 Coveage : 40 to 50 SFT / Ltr / coat
(for brush / spray application add 20%
water per Ltr )
BITUMINOUS COATING
Polyurethane blended Bituminous
waterproof coating system - Complies
with ASTM C 836 /D 638 / DIN - 1048 /
ASTM D 1004 - 76 ( Coverage :40 to
50 SFT / Kg / coat )
387 Ideal to use as waterproof of RCC 1 Kg 652
MAT-05397 BMT-H.110 substrates, Roofs, Sloped roofs,
Basements. Provides jointless and
seamless membrane waterproofing.
(for brush / spray application add 20%
water per Ltr )
High Performance Acrylic blended
Bituminous waterproof coating systems.
Complies with ASTM C 836 403
388 MAT-05398 BMT-H.111 1 Kg
( Coverage : 40 to 50 SFT / Ltr / coat )
(for brush / spray application add 20%
water per Ltr )
SOLAR REFLECTIVE COATING
Pure Acrylic Solar Reflective insulator
coating 231
389 MAT-05399 BMT-H.112 Complies with ASTM - G - 154 : 2000 & 1 Ltr
ASTM E 903 / EN 1062 - 3
requirement of EN 1504 / 2 : EN 1062 -

56
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
6
Coverage : 15 SFT / Ltr / 3 Coats
(for brush / spray application add 20%
water per Ltr
EPOXY COATINGS

Two component Water thinnable Food

Neutral Epoxy coating (Complies with
ASTM - C- 881 / EN 13813 )
Coverage : 70 to 80 SFT per Ltr / coat
390 Ideal to use as internal coatings for 1 Kg 486
MAT-05400 BMT-H.113 potable water tanks, reservoirs, sumps
and walls.
Part - I 1 Kg : Part -II 1/2 Kg dilute
with 1 Ltr of water

POLYURETHANE COATING
Single component cold applied
polyurethane waterproof coating -
Complies with ASTM 836 / EN 1062-3
391 requirement of EN 1504 - 2 1 Kg 462
MAT-05401 BMT-H.114 Coverage : 300 Grams Per coat / Sqm.
brush / spray application add 20%
water per Ltr
VIII. SUB-
ANTI CORROSIVE AGENTS
SECTION
Acrylic based Anti corrosive coating
To protect the exposed
392 reinforcement/steel structures against 1 Ltr 400
MAT-05402 BMT-H.115 corrosion.
Coverage : 40 SFT Per Ltr / Coat.
Rust converter–rust encapsulating
coating for steel During repairs to
393 BMT-H.116 protect, to convert the rust of 1 Ltr 558
MAT-05403
reinforcement / steel.
Coverage : 50 SFT Per Ltr / Coat

High range zinc rich epoxy resin primer

for reinforcement steel protection 565
394 MAT-05404 BMT-H.117 1 Kg
against corrosion.
Coverage : 4 Sq.Mtr. /Ltr / Coat

IX. SUB-SECTION CURING COMPOUND&MISCELLANEOUS CHEMICALS

Acrylic blended water based concrete

curing compounds
395 BMT-H.118 Complies with ASTM - C - 309 Class - 1 Kg 70
MAT-05405
A Types I & II
Coverage : 3.5 to 4 Sqm / Kg / Coat

57
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
CONCRETE REPAIR ADMIXTURES
Acrylic polymer modified reinstatement
concrete /mortar admixture
Dosage : 1 to 2 Ltrs Per Bag of 50 Kgs
Cement
396 BMT-H.119 can be mixed with required aggregates 1 Ltr 515
MAT-05406
To achieve trusted High Strength
Concreting / Structural rehabilitation /
concrete repairs.
CRYSTALLIZATION COMPOUND

Concrete waterproofing with

crystallization system by blocking inner
pours and cavities of concrete.
397 BMT-H.120 Coverage : 1.25 Kg per Sqm / Coat 1 Kg 412
MAT-05407
For Negative Water Pressure
Treatments like Cellar / Ceiling areas
etc.,

PLUGGING COMPOUND
Fast setting cement based plugging
compound. To arrest water flow
leakages. 100
398 MAT-05408 BMT-H.121 1 Kg
(Powder Form :mix with water direct
application
SHOTCRETE / GUNITING
ADMIXTURE
Set Accelerator for sprayed concrete
and plasticizer Complies with IS 9103-
99 / ASTM C 494 Type C / BS 5075
Dosage : 1 Kg to 3 Kgs per Bag of 50 100
399 BMT-H.122 1 Kg
MAT-05409 Kgs Cement Depend on setting time
required
For shotcrete / Gunniting / Emergency
concrete works
Quick setting, rapid hardening and
water proofing compound Complies
with ASTM C 494 Type C / IS 9103 -99
& BS 5075. 90
400 BMT-H.123 1 Ltr
MAT-05410 Dosage : 1 Kg to 3 Kgs Per Bag of 50
Kgs Cement Depend on setting time
For emergency works/Anti wash and
under water concreting.
MICRO CONCRETE
High strength non-shrink cementitious 45
401 MAT-05411 BMT-H.124 1 Kg
micro concrete
TILE ADHESIVES / GROUTS

58
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Tile Adhesive. Confirms to IS 15477-
2004 for both type I & II / BS : EN
12004 CTT adhesive.
402 BMT-H.125 For excellence adhesion, improved 1 Kg 65
MAT-05412
workability waterproof and also heat
resistant tile fixing adhesive.
At 3mm thickness 65-70 SFT
Three component system epoxy grout
for Vitrified tiles, Ceramic tiles and
stones B.S. 5980 : 1980 / BS EN 798
403 MAT-05413 BMT-H.126 1 Kg
120004,
R 2 T. Depends upon tile dimension
and grout width
Polymer Modified Tile Grout Complies
with BS EN 13888, CG 2AW
4 - 4.5 Sqm / Kg of 150 mm x 150mm 70
404 MAT-05414 BMT-H.127 1 Kg
tile size
mix 1 Part Water with 4 Parts Powder
Pack
SPECIALISED POLYSULPHIDE /
POLYURETHANE / HIGHBRED ACRYLIC
/SEALANT TREATMENT TO THE OLD /
EXISTING EXPANSION JOINT IN THE
TERRACE, COLUMN, BEAM

1. Cut and remove the existing

expansion joint in the screed for a
minimum width of 200 mm and a
depth of screed ( up to the mother
slab) by using diamond disc
cutting machine and dispose the
debris as per the department
instruction. All elevated kerb wall
both sides of the expansion joint
along with the top free laying slab,
cover etc as per the site
conditions under the scope of the
405 BMT-H.133 main contractor / client RMT 2719
2. Remove the existing filling for a
minimum depth of 40 mm using
sharp knife (approximate size 25
x 40 mm) as per the site
condition.
3. If the site condition allows to
insert backer rod, remove the
existing filling for a minimum
depth of 70 mm from the top ( the
clear filling of sealant should be
40 mm) and insert inside the
joint.
4. Clean the surface with air blower
up to receive a dust free surface
and make sure the surface is
sound dry or the moisture content
is less than 5 %.
5. Apply one coat of Penetrative
59
 Primer and allow touching dry.
6. Fill the joint by using a sealant
gun / notch trowel as per site
condition up to the required depth
and width and allow to dry for a
minimum period of 1 day as per
the climatic condition.
7. Apply two coat of penetrative
sealer coat site mixed primer -
mix with portable water and OP
Cement in the ratio of 2:1:3
cement by using slow speed
mixer machine with paddle for a
period of 2 to 3 minutes up to
receive a homogeneous mix) @
1.000 Liter per SQM in the entire
screed removed portion ( vertical
and horizontal faces) of 200 mm
along with saturated ( saturated
with MixPRIME AC100: Water:
OP Cement in the ratio of 2:1:1)
in between the two coats and
allow to cure for a period of 6
hours.
8. Do the necessary levelling
plastering with cement sand
mortar 1:2:4 (6 mm aggregate)
screed along with the addition of
MixBOND SBR Super and PLAST
FIBER 3S as per the following for
a minimum thickness of removal.
a. Mix the MixBOND SBR
Super @ 2 Liter / Bag
Cement in the ratio of 1:4
Mortar ( Pre mix the
admixture in the portable
water for preparing the
mortar)
b. Add 100 Gram
PLASTFIBRE 3S in the
above liquid and stirred
well with a slow speed
drill with paddle.
c. Prepare the cement sand
screed in the ratio of
1:2:4 with above
prepared liquid for the
suitable consistency.
d. Necessary curing and
drying for a minimum
period of 4 days.
9. In wet condition, provide a
dummy expansion joint on the top
of the screed for a minimum size
of 10 x 10 mm by using sharp
trowel
10. Apply one coat of Penetrative in
the entire surface of the dummy
joint and allow to touch dry for a
period of 30 minutes.
Fill the in the joint by using a sealant gun /
notch trowel as per site condition up to the
required depth and width

60
Procedure for Waterproofing System –
500 mm width

1. Apply one coat of penetrative sealer

coat site mixed - mix with portable
water and OP Cement in the ratio of
2:1:3 (Two part MixPRIME AC100 :
One Part water : 3 Part OP cement by
using slow speed mixer machine with
paddle for a period of 2 to 3 minutes
up to receive a homogeneous mix) @
1.000 Liter per SQM as per the
porosity of the prepared mother slab
by using roller brush / hand brush /
Sprayer and allow to dry for a period
of 6 to 8 Hrs after the laying of tensile
reinforcement mat.
2. Lay the (as per site condition) on the
top in the wet condition. In such a way
place the MixMAT GFM 70/50 on the
prepared surface and applied the
slurry over also obtain the same
technical property.
3. Apply one coat of penetrative primer
@ 0.250 Liter per SQM by using roller
brush / hand brush / sprayer and allow
drying for a period of 6 Hrs.
4. Application of Base Coat Water
Proofing System with @ 0.500 Kg /
SQM by using roller brush / hand
brush / sprayer and allow to dry for a
period of 6 Hrs.
5. Application of Top Coat Water
Proofing System with @ 0.500 Kg /
SQM by using roller brush / hand
brush / sprayer and allow to final
curing for a period of 2 to 3 days

equivalent compline with BS 5254, ASTM

C 834, ASTM C 1253, ASTM D 4541,
ASTM D 1117, ASTM D 5729

Note: -
1 ) No dilution or modification
recommended except item no 7,8 and 1 in
HR5 System.
2 ) The all materials should be procure as
per the consumption with respect of the
work order.
3 ) The application should be carried out
by an approved agency.
4 ) The contractor should provide 5 years
material warrantee from the Manufacturer
and 5 year warrantee from the applicator
or combined
5 )The all civil work such as cutting (
elevated kerb wall with slab), removing
cleaning and screed with cement sand and
aggregate including all materials and
labours should be under the scope of the
main contractor / client as per the site
condition and our requirement to complete
the expansion joint treatment as per the
BOQ / Tender document.

61
 Basic Rate
for SoR
CFMS code
S. No Item Code Description of item Unit 2024-25
(Rs.)

1 2 3 4 5

GLASS MATERIALS
(Landing cost – including loading, cost of
I.SECTION
conveyance & unloading)
I.SUB- SECTION PLAIN GLASS PANES

406 MAT-01052 BMT-I.01 Plain Float Glass 4 mm thick 1 sqm 484

407 MAT-01053 BMT-I.02 Plain Float Glass 5 mm thick 1 sqm 592

408 MAT-01054 BMT-I.03 Plain Float Glass 6 mm thick 1 700

Sqm
1 1000
409 MAT-01055 BMT-I.04 Plain Float Glass 8 mm thick
Sqm
1 1160
410 MAT-01056 BMT-I.05 Plain Float Glass 10 mm thick
Sqm
1 1380
411 MAT-01057 BMT-I.06 Plain Float Glass 12 mm thick
Sqm

II..SUB- SECTION PIN HEADED GLASS PANES

412 MAT-01064 BMT-I.13 Pin headed Glass 4 mm thick 1 sqm 375

413 MAT-01065 BMT-I.14 Pin headed Glass 5 mm thick 1 sqm 465

III..SUB- SECTION TINTED GLASS PANES

Tinted - Bronze/ Green Glass 4 mm 590

414 MAT-01058 BMT-I.07 1 sqm
thick
Tinted - Bronze/ Green Glass 5 mm 700
415 MAT-01059 BMT-I.08 1 sqm
thick
Tinted - Bronze/ Green Glass 6 mm 1 900
416 MAT-01060 BMT-I.09 thick Sqm

62
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Tinted - Bronze/ Green Glass 8 mm 1 1164
417 MAT-01061 BMT-I.10 thick Sqm
Tinted - Bronze/ Green Glass 10 mm 1 1460
418 MAT-01062 BMT-I.11 thick Sqm
Tinted - Bronze/ Green Glass 12 mm 1 1820
419 MAT-01063 BMT-I.12 thick Sqm

IV..SUB-SECTION FROSTED/ GROUND GLASS PANES

420 MAT-01066 BMT-I.15 Frosted / Ground Glass 4 mm thick 1 sqm 580

421 MAT-01067 BMT-I.16 Frosted / Ground Glass 5 mm thick 1 sqm 755

V..SUB- SECTION TOUGHENED PANES

Toughened Plain Glass 5 mm (including 815

422 MAT-01068 BMT-I.17 1 sqm
Glass)
Toughened Plain Glass 6 mm (including 980
423 MAT-01069 BMT-I.18 1 sqm
Glass)
Toughened Plain Glass 8 mm (including 1295
424 MAT-01070 BMT-I.19 1 sqm
Glass)
Toughened Plain Glass 10 mm 1615
425 MAT-01071 BMT-I.20 1 sqm
(including Glass)
Toughened Plain Glass 12 mm 1800
426 MAT-01072 BMT-I.21 1 sqm
(including Glass)
PAINTS & POLISHES
J.SECTION (Landing cost – including loading, cost of
conveyance & unloading)
I.SUB-SECTION PRIMERS, FILLERS & BASES

Supply of water based Cement Primer 175

427 MAT-01073 BMT-J.01 1 Kg
of Interior Grade- 1
Supply of water based Cement Primer 205
428 MAT-01074 BMT-J.02 1 Kg
of Exterior Grade- 2
Supply of wall putty of White Cement or 607
429 MAT-01104 BMT-J.31 20 Kg
Polymer or Cement based
Supply of Red Oxide Primer Paint for 1 160
430 MAT-01075 BMT-J.03 iron works of Grade -1 Litre
Supply of Zinc Chromate Yellow Oxide 215
431 MAT-01076 BMT-J.04 1 Litre
Primer paint for iron works
432 MAT-01077 BMT-J.05 Supply of Wood Primer 1 Litre 180
Supply of Metal paste (Putty) for steel 135
433 MAT-01078 BMT-J.06 1 Kg
works
434 MAT-01079 BMT-J.07 Supply of Putty for wood work 1 Kg 145
435 MAT-01080 BMT-J.08 Supply of White Lead 1 Kg 122

63
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.).
1 2 3 4 5
436 MAT-01081 BMT-J.09 Supply of Synthetic clear Varnish 1 Litre 169
437 MAT-01082 BMT-J.10 Supply of Spirit 1 Litre 99
438 MAT-01083 BMT-J.11 Supply of Linseed Oil 1 Litre 63
Supply of thinner for melamine polish/ 155
439 MAT-01084 BMT-J.12 1 Litre
french polish
Supply of thinner for Poly-urethene 260
440 MAT-01085 BMT-J.13 1 Litre
polish
441 MAT-01086 BMT-J.14 Supply of French Polish 1 Litre 210
442 MAT-01087 BMT-J.15 Supply of ready made Wax Polish 1 Kg 525
443 MAT-01091 BMT-J.19 Supply of wood adhesive compound 1 Kg 260
Supply of anti-corrosive grade - 1 455
444 MAT-01100 BMT-J.27 1 Litre
bitumen paint of black colour

II.SUB-SECTION DISTEMPER PAINTS

445 MAT-01092 BMT-J.20 Supply of Dry Powder Distemper 1 Kg 48

Supply of acrylic based Oil Bound 85
446 MAT-01093 BMT-J.21 1 Kg
washable Distemper
Supply of paint grade white lime for 505
447 MAT-01099 BMT-J.26 25 Kg
wash
448 MAT-01095 BMT-J.23 Supply of Water proof Cement paint 1 Kg 55
Supply of water proof Cement paint 1070
449 MAT-01098 BMT-J.25 25 Kg
pack

III.SUB- SECTION EMULSION BASED PAINTS

Supply of acrylic emulsion paint

interior grade having VOC (Volatile 200
450 MAT-01097 BMT-J.24 Organic Compound) content less than 1 Litre
50 grams/ liter.
Supply of acrylic emulsion paint exterior
grade with silicon additives having 235
451 MAT-01107 BMT-J.34 VOC (Volatile Organic Compound ) 1Lit
content less than 50 grams/ liter.
Supply of acrylic emulsion paint
weather proof water-based, modified
acrylic with silicon additives exterior 245
MAT-01108 BMT-J.35 grade having VOC (Volatile Organic 1Lit
452 Compound ) content less than 50
grams/ liter.

IV.SUB- SECTION SOLVENT BASED PAINTS

Supply of synthetic polymer luxury

plastic emulsion paint of superior grade 490
453 MAT-01094 BMT-J.22 having VOC (Volatile Organic 1 Litre
Compound) content less than 50 grams/

64
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
liter.

V.SUB- SECTION OIL BASED ENAMEL PAINTS

Supply of ready mixed Synthetic Enamel

paints in all shades Grade - I having 285
454 MAT-01102 BMT-J.29 VOC (Volatile Organic Compound ) 1 Litre
content less than 50 grams/ liter.
Supply of ready mixed Synthetic Enamel
paints in all shades Grade - II having 195
455 MAT-01103 BMT-J.30 VOC (Volatile Organic Compound ) 1 Litre
content less than 50 grams/ liter.

VI.SUB- SECTION TEXTURE PAINTS

456 MAT-01105 BMT-J.32 Exterior Texture. 25 Kg 839

457 MAT-01106 BMT-J.33 Gold line Exterior Texture 25 Kg 1120

VII.SUB-SECTION SPECIAL PAINTS

459 MAT-01088 BMT-J.16 Supply of Melamine Polish 1 Litre 340

Supply of Interior Grade Poly-Urethene 770
460 MAT-01089 BMT-J.17 1 Litre
Polish
Supply of Exterior Grade Poly-Urethene 880
461 MAT-01090 BMT-J.18 1 Litre
Polish
462 MAT-01101 BMT-J.28 Supply of grade-1 aluminium paint 1 Litre 330
Acrylic spray plaster in paste form made
with specially selected inert mineral
fillers, antifungal agents to protect the
material the acrylic binding medium 500
MAT-05415 BMT-J.36 used gives good surface adhesion any 25Kg
463 grade Spray Plaster - Superfine
(Interior Grade)
Acrylic coarse spray plaster in paste
form made with specially selected inert
mineral fillers, antifungal agents to 445
MAT-05416 BMT-J.37 protect the material the acrylic binding 25Kg
464 medium used gives good surface
adhesion interior gradeAcrylic coarse
Supply of acrylic emulsion paint
interior premium grade having VOC 300
465 MAT-05417 BMT-J.38 (Volatile Organic Compound) content 1 Liter
less than 50 grams/liter
Supply of Base coat as primer for
natural textures and natural stone based 88
466 MAT-05418 BMT-J.39 1Kg
paints - Exterior GradeBASE COAT
Acrylic spray plaster in paste form
made with specially selected inert 1385
467 MAT-05419 BMT-J.40 25Kg
mineral fillers, antifungal agents to

65
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
protect the material the acrylic binding
medium used gives good surface
adhesion exterior grade Spray Plaster
(Exterior)
Supply of acrylic emulsion paint
exterior premium grade with silicon
additives having VOC (Volatile Organic
468 MAT-05420 BMT-J.41 Compound) content less than 50 1 Liter 320
grams/liter.Alltimate
469 BMT-J.42 Poly-urethane paint 1 Liter 525

PARTICLE BOARDS
(Landing cost – including loading,cost of conveyance,
K - SECTION unloading)
I.SUB- MELAMINE FACED PLAIN PARTICLE
SECTION BOARDS
Melamine faced Single Deco PPB- 8 623
470 MAT-01109 BMT-K.01 1Sqm
mm thick
Melamine faced Single Deco PPB- 12 706
471 MAT-01110 BMT-K.02 1Sqm
mm thick
Melamine faced Single Deco PPB- 18 834
472 MAT-01111 BMT-K.03 1Sqm
mm thick
Melamine faced Single Deco PPB- 25 924
473 MAT-01112 BMT-K.04 1Sqm
mm thick
Melamine faced Single Deco PPB- 35 1 1517
474 MAT-01113 BMT-K.05 mm thick Sqm
Melamine faced Twin Deco PPB- 8 mm 1 650
475 MAT-01114 BMT-K.06 thick Sqm
Melamine faced Twin Deco PPB- 12 1 807
476 MAT-01115 BMT-K.07 mm thick Sqm
Melamine faced Twin Deco PPB-18 mm 1 935
477 MAT-01116 BMT-K.08 thick Sqm
Melamine faced Twin Deco PPB-25 mm 1 1026
478 MAT-01117 BMT-K.09 thick Sqm
Melamine faced Twin Deco PPB-35 mm 1 1942
479 MAT-01118 BMT-K.10 thick Sqm

II.SUB- SECTION INSULATING PARTICLE BOARDS

Natural Colour-Insulating Board - 12 mm 1 252

480 MAT-01119 BMT-K.11 thick Sqm
Natural Colour-Insulating Board - 18 mm 1 373
481 MAT-01120 BMT-K.12 thick Sqm
Natural Colour-Insulating Board - 25 mm 1 432
482 MAT-01121 BMT-K.13 thick Sqm
1 279
483 MAT-01122 BMT-K.14 White Insulating Board - 12 mm thick
Sqm
484 MAT-01123 BMT-K.15 White Insulating Board - 18 mm thick 1 405

66
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Sqm
1 374
485 MAT-01124 BMT-K.16 White Insulating Board - 25 mm thick
Sqm

III.SUB- SECTION MEDIUM DENSITY FIBRE BOARD

Medium Fibre Board: Interior Grade - 6 1 391

486 MAT-01125 BMT-K.17 mm thick Sqm
Medium Fibre Board: Interior Grade - 8 1 464
487 MAT-01126 BMT-K.18 mm thick Sqm
Medium Fibre Board: Interior Grade - 12 1 561
488 MAT-01127 BMT-K.19 mm thick Sqm
Medium Fibre Board: Interior Grade - 15 1 727
489 MAT-01128 BMT-K.20 mm thick Sqm
Medium Fibre Board: Interior Grade - 18 1 810
490 MAT-01129 BMT-K.21 mm thick Sqm
Medium Fibre Board: Interior Grade - 25 1 1257
491 MAT-01130 BMT-K.22 mm thick Sqm
Medium Fibre Board: Interior Grade - 30 1 1527
492 MAT-01131 BMT-K.23 mm thick Sqm
Medium Fibre Board: Interior Grade - 35 1 1662
493 MAT-01132 BMT-K.24 mm thick Sqm
Medium Fibre Board: Exterior Grade - 6 1 519
494 MAT-01133 BMT-K.25 mm thick Sqm.
Medium Fibre Board: Exterior Grade - 8 1 519
495 MAT-01134 BMT-K.26 mm thick Sqm.
Medium Fibre Board: Exterior Grade - 1 789
496 MAT-01135 BMT-K.27 12 mm thick Sqm.
Medium Fibre Board: Exterior Grade - 1 987
497 MAT-01136 BMT-K.28 15 mm thick Sqm.
Medium Fibre Board: Exterior Grade - 1 1101
498 MAT-01137 BMT-K.29 18 mm thick Sqm.
Medium Fibre Board: Exterior Grade - 1 1480
499 MAT-01138 BMT-K.30 25 mm thick Sqm.
Medium Fibre Board: Exterior Grade - 1 1838
500 MAT-01139 BMT-K.31 30 mm thick Sqm.
Medium Fibre Board: Exterior Grade - 1 2160
501 MAT-01140 BMT-K.32 35 mm thick Sqm.
1 364
502 MAT-01141 BMT-K.33 MDF Board: Plain-Interior - 9 mm thick
Sqm
1 415
503 MAT-01142 BMT-K.34 MDF Board: Plain-Interior - 12 mm thick
Sqm
1 487
504 MAT-01143 BMT-K.35 MDF Board: Plain-Interior - 18 mm thick
Sqm

67
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
1 519
505 MAT-01144 BMT-K.36 MDF Board: Plain-Interior - 25 mm thick
Sqm
1 930
506 MAT-01145 BMT-K.37 MDF Board: Plain-Interior - 30 mm thick
Sqm
1 1122
507 MAT-01146 BMT-K.38 MDF Board: Plain-Interior - 35 mm thick
Sqm
1 377
508 MAT-01147 BMT-K.39 MDF Board: Plain-Exterior - 9 mm thick
Sqm
1 484
509 MAT-01148 BMT-K.40 MDF Board: Plain-Exterior - 12 mm thick
Sqm
1 635
510 MAT-01149 BMT-K.41 MDF Board: Plain-Exterior - 18 mm thick
Sqm
1 913
511 MAT-01150 BMT-K.42 MDF Board: Plain-Exterior - 25 mm thick
Sqm
1 1143
512 MAT-01151 BMT-K.43 MDF Board: Plain-Exterior - 30 mm thick
Sqm
1 1361
513 MAT-01152 BMT-K.44 MDF Board: Plain-Exterior - 35 mm thick
Sqm
MDF Board: Interior-One Side 1 618
514 MAT-01153 BMT-K.45 Laminated -9 mm thick Sqm
MDF Board: Interior-One Side 1 693
515 MAT-01154 BMT-K.46 Laminated -12 mm thick Sqm
MDF Board: Interior-One Side 1 795
516 MAT-01155 BMT-K.47 Laminated -18 mm thick Sqm
MDF Board: Interior-One Side 1 895
517 MAT-01156 BMT-K.48 Laminated -25 mm thick Sqm
MDF Board: Interior-One Side 1 1195
518 MAT-01157 BMT-K.49 Laminated -30 mm thick Sqm
MDF Board: Interior-One Side 1 1396
519 MAT-01158 BMT-K.50 Laminated -35 mm thick Sqm
MDF Board: Exterior-One Side 1 695
520 MAT-01159 BMT-K.51 Laminated -9 mm thick Sqm
MDF Board: Exterior-One Side 1 800
521 MAT-01160 BMT-K.52 Laminated -12 mm thick Sqm
MDF Board: Exterior-One Side 1 802
522 MAT-01161 BMT-K.53 Laminated -18 mm thick Sqm
MDF Board: Exterior-One Side 1 1035
523 MAT-01162 BMT-K.54 Laminated -25 mm thick Sqm
MDF Board: Exterior-One Side 1 1330
524 MAT-01163 BMT-K.55 Laminated -30 mm thick Sqm
MDF Board: Exterior-One Side 1 1413
525 MAT-01164 BMT-K.56 Laminated -35 mm thick Sqm
MDF Board: Interior-Both Side 1 623
526 MAT-01165 BMT-K.57 Laminated -9 mm thick Sqm

68
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
MDF Board: Interior-Both Side 1 773
527 MAT-01166 BMT-K.58 Laminated -12 mm thick Sqm
MDF Board: Interior-Both Side 1 897
528 MAT-01167 BMT-K.59 Laminated -18 mm thick Sqm
MDF Board: Interior-Both Side 1 1107
529 MAT-01168 BMT-K.60 Laminated -25 mm thick Sqm
MDF Board: Interior-Both Side 1 1288
530 MAT-01169 BMT-K.61 Laminated -30 mm thick Sqm
MDF Board: Interior-Both Side 1 756
531 MAT-01170 BMT-K.62 Laminated -35 mm thick Sqm
MDF Board: exterior-Both Side 1 745
532 MAT-01171 BMT-K.63 Laminated -9 mm thick Sqm
MDF Board: exterior-Both Side 1 836
533 MAT-01172 BMT-K.64 Laminated -12 mm thick Sqm
MDF Board: exterior-Both Side 1 987
534 MAT-01173 BMT-K.65 Laminated -18 mm thick Sqm
MDF Board: exterior-Both Side 1 1124
535 MAT-01174 BMT-K.66 Laminated -25 mm thick Sqm
MDF Board: exterior-Both Side 1 1402
536 MAT-01175 BMT-K.67 Laminated -30 mm thick Sqm
MDF Board: exterior-Both Side 1 1350
537 MAT-01176 BMT-K.68 Laminated -35 mm thick Sqm

IV.SUB- SECTION CEMENT BONDED PARTICLEBOARD

Cement bonded particle board 281

538 MAT-01177 BMT-K.69 conforming to IS 14276- 6 mm thick 1 sqm

Cement bonded particle board 291

539 MAT-01178 BMT-K.70 conforming to is 14276- 8 mm thick 1 sqm

Cement bonded particle board 436

540 MAT-01179 BMT-K.71 conforming to is 14276- 10 mm thick 1 sqm

Cement bonded particle board 447

541 MAT-01180 BMT-K.72 conforming to is 14276- 12 mm thick 1 sqm

Cement bonded particle board 452

542 MAT-01181 BMT-K.73 conforming to is 14276- 16 mm thick 1 sqm

Cement bonded particle board 1 701

543 MAT-05423 BMT-K.109 conforming to is 14276- 18 mm thick Sqm
Cement bonded particle board 779
544 MAT-01182 BMT-K.74 conforming to is 14276- 20 mm thick 1 sqm

Cement bonded particle board 862

545 MAT-01183 BMT-K.75 conforming to is 14276- 25 mm thick 1 sqm

Cement bonded particle board 1132

546 MAT-01184 BMT-K.76 conforming to is 14276- 30 mm thick 1 sqm

Cement bonded particle board 1350

547 MAT-01185 BMT-K.77 conforming to is 14276- 40 mm thick 1 sqm

69
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Pre laminated cement bonded particle 423
549 MAT-01186 BMT-K.78 board-6 mm thick 1 sqm

Pre laminated cement bonded particle 650

550 MAT-01187 BMT-K.79 board-8 mm thick 1 sqm

Pre laminated cement bonded particle 804

551 MAT-01188 BMT-K.80 board- 10 mm thick 1 sqm

Pre laminated cement bonded particle 841

552 MAT-01189 BMT-K.81 board- 12 mm thick 1 sqm

Pre laminated cement bonded particle 935

553 MAT-01190 BMT-K.82 board- 16 mm thick 1 sqm

Cement Bonded Particale DESIGNER

BOARD Available Designs 1. Lumber 2. 316
554 MAT-01191 BMT-K.83 Quadra 3. Murk Standard size 8’X4’ 1 sqm
10’X4’- 6mm thick
Cement Bonded Particale DESIGNER
BOARD Available Designs 1. Lumber 2. 396
555 MAT-01192 BMT-K.84 Quadra 3. Murk Standard size 8’X4’ 1 sqm
10’X4’- 8mm thick
Cement Bonded Particale DESIGNER
BOARD Available Designs 1. Lumber 2. 395
556 MAT-01193 BMT-K.85 Quadra 3. Murk Standard size 8’X4’ 1 sqm
10’X4’- 10mm thick
Cement Bonded Particale DESIGNER
BOARD Available Designs 1. Lumber 2. 624
557 MAT-01194 BMT-K.86 Quadra 3. Murk Standard size 8’X4’ 1 sqm
10’X4’- 12mm thick
Cement Bonded Particale DESIGNER
BOARD Available Designs 1. Lumber 2. 824
558 MAT-01195 BMT-K.87 Quadra 3. Murk Standard size 8’X4’ 1 sqm
10’X4’- 16mm thick
Cement Bonded Board conforming to 1 192
559 MAT-01196 BMT-K.88 IS:14862-2000 - 4mm Thick Sqm
Cement Bonded Board conforming to 1 343
560 MAT-01197 BMT-K.89 IS:14862-2000 - 6mm Thick Sqm
Cement Bonded Board conforming to 1 394
561 MAT-01198 BMT-K.90 IS:14862-2000 - 8mm Thick Sqm
Cement Bonded Board conforming to 1 394
562 MAT-01199 BMT-K.91 IS:14862-2000 - 10mm Thick Sqm
Cement Bonded Board conforming to 1 486
563 MAT-01200 BMT-K.92 IS:14862-2000 - 12mm Thick Sqm
Cement Bonded Board conforming to 1 518
564 MAT-01201 BMT-K.93 IS:14862-2000 - 14mm Thick Sqm
Cement Bonded Board conforming to 1 518
565 MAT-01202 BMT-K.94 IS:14862-2000 - 16mm Thick Sqm
Cement Bonded Board conforming to 1 624
566 MAT-01203 BMT-K.95 IS:14862-2000 - 18mm Thick Sqm

70
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Cement Bonded Board conforming to 1 706
567 MAT-01204 BMT-K.96 IS:14862-2000 - 20mm Thick Sqm

568 MAT-01213 BMT-K.105 ITEM DELETED

50 mm thick SOLID WALL PANEL

Sandwich panels made of light weight 1 1091
569 MAT-05421 BMT-K.106 FRACC non-asbestos fibre reinforced Sqm
cement concrete
75 mm thick SOLID WALL PANEL
Sandwich panels made of light 1 1350
570 MAT-05422 BMT-K.107 weight FRACC non-asbestos fibre Sqm
reinforced cement concrete
Note: Items BMT-K.97 , BMT-K.98,BMT-K.99,BMT-
K.100,BMT-K.101,BMT-K.102,BMT-K.103,BMT-K.104 are
removed in the section K and are brought as new items in
the Section L as BMT-L.21,BMT-L.22,BMT-L.23,BMT-
L.24,BMT-L.25,BMT-L.26,BMT-L.27,BMT-L.28.
PLYWOOD
(Landing cost – incuding loading, cost of
L.SECTION conveyance, unloading)
I.SUB- SECTION MOISTURE RESISTANT (MR) GRADE

3 Ply - 4 mm thick Plywood(IS:303) MR 1 391

571 MAT-01216 BMT-L.01 Grade Sqm
5 Ply - 6 mm thick Plywood(IS:303) MR 1 420
572 MAT-01217 BMT-L.02 Grade Sqm
5 Ply - 8 mm thick Plywood(IS:303) MR 1 550
573 MAT-01218 BMT-L.03 Grade Sqm
5 Ply - 9 mm thick Plywood(IS:303) MR 1 554
574 MAT-01219 BMT-L.04 Grade Sqm
9 Ply - 12 mm thick Plywood(IS:303) MR 1 676
575 MAT-01220 BMT-L.05 Grade Sqm
9 Ply - 15 mm thick Plywood(IS:303) MR 1 750
576 MAT-01221 BMT-L.06 Grade Sqm
9 Ply - 18 mm thick Plywood(IS:303) MR 1 780
577 MAT-01222 BMT-L.07 Grade Sqm

II.SUB- SECTION BOILING WATER RESISTANT (BWR) GRADE

3 Ply - 4 mm thick Plywood(IS:303) 1 478

578 MAT-01223 BMT-L.08 BWR/BWP Grade Sqm
5 Ply - 6 mm thick Plywood(IS:303) 1 570
579 MAT-01224 BMT-L.09 BWR/BWP Grade Sqm
5 Ply - 8 mm thick Plywood(IS:303) 1 650
580 MAT-01225 BMT-L.10 BWR/BWP Grade Sqm
5 Ply - 9 mm thick Plywood(IS:303) 1 660
581 MAT-01226 BMT-L.11 BWR/BWP Grade Sqm

71
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.).)
1 2 3 4 5
9 Ply - 12 mm thick Plywood(IS:303) 1 800
582 MAT-01227 BMT-L.12 BWR/BWP Grade Sqm
9 Ply - 15 mm thick Plywood(IS:303) 1 990
583 MAT-01228 BMT-L.13 BWR/BWP Grade Sqm
9 Ply - 19 mm thick Plywood(IS:303) 1 1010
584 MAT-01229 BMT-L.14 BWR/BWP Grade Sqm

III.SUB- SECTION VENEERED DECORATIVE PLYWOOD

3 Ply-4 mm thick One side Teak Veneer 1 677

585 MAT-01230 BMT-L.15 Decorated Plywood (IS:1328) Sqm
5 Ply - 6 mm thick One side Teak 1 788
586 MAT-01231 BMT-L.16 Veneer Decorated Plywood (IS:1328) Sqm
5 Ply - 9 mm thick One side Teak 1 965
587 MAT-01232 BMT-L.17 Veneer Decorated Plywood (IS:1328) Sqm
9 Ply - 13 mm thick One side Teak 1 1353
588 MAT-01233 BMT-L.18 Veneer Decorated Plywood (IS:1328) Sqm
5 Ply - 9 mm thick Both sides Teak 1 1381
589 MAT-01234 BMT-L.19 Veneer Decorated Plywood (IS:1328) Sqm
9 Ply - 12 mm thick Both sides Teak 1 1213
590 MAT-01235 BMT-L.20 Veneer Decorated Plywood (IS:1328) Sqm

IV.SUB- SECTION LAMINATES

Laminate Sheets - Glossy Finish: 1 mm 1 411

591 MAT-01205 BMT-L.21 thick Sqm
Laminate Sheets - Glossy Finish: 1.50 1 579
592 MAT-01206 BMT-L.22 mm thick Sqm
Laminate Sheets - Glossy Finish: 1.80 1 580
593 MAT-01207 BMT-L.23 mm thick Sqm
Laminate Sheets - Mat Finish: 1 mm 1 431
594 MAT-01208 BMT-L.24 thick Sqm
Laminate Sheets - Mat Finish: 1.50 mm 1 590
595 MAT-01209 BMT-L.25 thick Sqm
Laminate Sheets - Mat Finish: 1.80 mm 1 583
596 MAT-01210 BMT-L.26 thick Sqm

V.SUB- SECTION COMMERCIAL VENEERS

Teak Veneer Lamination - 4 mm thick - 1 483

597 BMT-L.27 Pencil Grains Sqm
Teak Veneer Lamination - 4 mm thick - 1 861
598 BMT-L.28 Natural Grains Sqm
Providing Wood Polymer Composite
(WPC) solid, frostywhite single extruded
BMT-L.29 factory made 2.44 mt x 1.22 mt boards
in

72
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2023-
24 (Rs.)
1 2 3 4 5
6 MM thickness (Density 550 kg/Cum,
599 MAT-05424 BMT-L.29.A Weight 9.5Kg) sqmt 739

11 MM thickness (Density 500 kg/Cum,

600 MAT-05425 BMT-L.29.B Weight 16.5Kg) sqmt 1214

18 MM thickness (Density 650 kg/Cum,

601 MAT-05426 BMT-L.29.C Weight 35Kg) sqmt 2250

CEILINGS, WALL PARTITIONS & WALL

M.SECTION LININGS
I.SUB-SECTION FALSE CEILINGs- TILES / SHEETS

Gypsum Board tiles of size notless than

0.595 M x 0.595 M of 12.5 mm thick as 1
602 MAT-01236 BMT-M.01 Sqm
285
per IS 2095 -1992
Gypsum Board tiles of size notless than
0.595 M x 0.595 M of 9 mm thick as per 1
603 MAT-01237 BMT-M.02 281
IS 2095 -1992 Sqm

Gypsum Board Plain sheet 12.5 mm 1

604 MAT-01238 BMT-M.03 thick as per IS 2095 -1993 Sqm 233

14 mm - Mineral Fiber sheet 600 x 600

of Board / Tegular Edge tiles with a
Humidity Resistance of 80% RH,
605 Average NRC 0.50, Light Reflectance 1 605
MAT-01263 BMT-M.28 >80%, Thermal Conductivity λ = 0.052 Sqm
to 0.057 w/mk, Fire Performance Class
0/Class 1
15 mm - Mineral Fiber sheet 600 x 600
of Board / Tegular Edge tiles with a
Humidity Resistance of 90% RH,
606 Average NRC 0.50, Light Reflectance 1 731
MAT-01264 BMT-M.29 >80%, Thermal Conductivity λ = 0.052 Sqm
to 0.057 w/mk, Fire Performance Class
0/Class 1
16 mm - Tegular Edge 600 x 600 of
Board / Tegular/ Micro look Edge tiles
with a Humidity Resistance of 99% RH,
607 Average NRC 0.60, Light Reflectance 1 736
MAT-01265 BMT-M.30 >88%, Thermal Conductivity λ = 0.052 Sqm
to 0.057 w/mk, Fire Performance Class
0/Class 1
12 mm - Mineral Fiber sheet 600 x 600 1
608 MAT-01266 BMT-M.31 (Square / Tegular) Edge tiles Sqm 491

Supply of Thermocole 12 mm thick 1

609 MAT-01271 BMT-M.36 sheets Sqm 35

Supply of Thermocole 19 mm thick 1

610 MAT-01272 BMT-M.37 sheets Sqm 52

1
611 MAT-01275 BMT-M.40 Calcium Silicate Boards - 6mm thick 285
Sqm

73
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
1
612 MAT-01276 BMT-M.41 Calcium Silicate Boards - 8mm thick 369
Sqm
1
613 MAT-01277 BMT-M.42 Calcium Silicate Boards - 10mm thick 463
Sqm
1
614 MAT-01278 BMT-M.43 Calcium Silicate Boards - 12mm thick 581
Sqm
Supplying and fixing of false ceiling
using Plaster of paris Boards 12 mm
thick with standard GI ceiling angles,
615 sections perimeter channels including 1 441
MAT-01286 BMT-M.51
cost and conveyance of all materials Sqm
and labour charges etc complete
Supplying and fixing of false ceiling
using Plaster of paris Boards 10 mm
thick with standard GI ceiling angles,
616 sections perimeter channels including 1 368
MAT-01287 BMT-M.52
cost and conveyance of all materials Sqm
and labour charges etc complete
Designer ceiling Cement Boards - 1
617 MAT-01288 BMT-M.53 thickness 3.2 mm Sqm 238

High pressure steam cured Cement 1

618 MAT-01289 BMT-M.54 Boards 4 mm thick Sqm. 151

High pressure steam cured Cement 1

619 MAT-01290 BMT-M.55 Boards 6 mm thick Sqm. 218

High pressure steam cured Cement 1

620 MAT-01291 BMT-M.56 Boards 8 mm thick Sqm. 284

High pressure steam cured Cement 1

621 MAT-01292 BMT-M.57 Boards 10 mm thick Sqm. 363

High pressure steam cured Cement 1

622 MAT-01293 BMT-M.58 Boards 12 mm thick Sqm. 280

High pressure steam cured Cement 1

623 MAT-01294 BMT-M.59 Boards 14 mm thick Sqm. 504

High pressure steam cured Cement 1

624 MAT-01295 BMT-M.60 Boards 16 mm thick Sqm. 517

High pressure steam cured Cement 1

625 MAT-01296 BMT-M.61 Boards 18 mm thick Sqm. 562

High pressure steam cured Cement 1

626 MAT-01297 BMT-M.62 Boards 20 mm thick Sqm. 694
High pressure steam cured designer 1
627 MAT-01298 BMT-M.63 Cement Boards 4 mm thick Sqm. 194

High pressure steam cured designer 1

628 MAT-01299 BMT-M.64 Cement Boards 6 mm thick Sqm. 303

Supply and fixing of CEMENT BONDED

PARTICLE BOARDS (IS 14276) false 1
629 MAT-01305 BMT-M.70 ceiling using 8MM CEMENT BONDED 1085
Sqm
PARTICLE BOARDS with galvanized

74
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
and pre painted steel T section of size
24mm x 38mm x 0.3 mm for main T duty
pre punched to accept cross T section
of size 24mm x 30mm x 0.3 mm duly
punched at both ends for insertion into
main T. The grid size will be 610mm x
610mm. The frame work (grid) is
suspended to the roof by using G.I flat
of 0.60mm or 14-gauge G.I wire with
necessary fixers to the roof and frame
work. CEMENT BONDED PARTICLE
BOARDS lay on the grid. The cost
inclusive of necessary hardware, labor,
one coat of primer (Both side) and two
coats of smooth finish on visible side.
Providing and fixing false ceiling
consisting of 600mmX600mm, Solid
PVC insulation panels having wall
thickness of 1mm thick plain PVC rigid
foam sheet and EPS as defined in of
desired thickness depending on
insulation required shall be insert in a
frame work made using anodized
aluminium Tee section of sizes 1”X1”
(25X25mm, 19 gauge or 1mm thick) in
630 square pattern of grid sizes of 2’X2’ 1366
(600X600mm). The aluminium
framework is supported from the ceiling
with the help of G.I. hook and G.I.
MAT-01314 BMT-M.79 wire/6mm.M.S. rods of required sizes to 1 sqm
maintain proper level etc. the aluminium
framework is supported on side wall with
the use of aluminium 1”X1” (25X25mm)
angles, complete as per direction of
Engineer-in-Charge, manufacture’s
specification & drawing
Mineral Fibre Ceiling Tile of 0.595 mm x
0.595 mm of 13 mm thick Square Edge - 1 374
631 MAT-01315 BMT-M.80
Fissura Fine Model Sqm

Mineral Fibre Ceiling Tile of 0.595 mm x

0.595 mm of 13 mm thick Square Edge - 1 376
632 MAT-01316 BMT-M.81
Speckle Model Sqm

Mineral Fibre Ceiling Tile of 0.595 mm x

0.595 mm of 13 mm thick Square Edge - 1 414
633 MAT-01317 BMT-M.82
Textura Model Sqm

Mineral Fibre Ceiling Tile of 0.595 mm x

0.595 mm of 15 mm thick Standard 1 475
634 MAT-01318 BMT-M.83 Sqm
Regular Edge
Mineral Fibre Ceiling Tile of 0.595 mm x
0.595 mm of 15 mm thick Fissura Fine 1 545
635 MAT-01319 BMT-M.84 Sqm
Model

75
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit
SoR 2024-
25 (Rs.)
1 2 3 4 5
Mineral Fibre Ceiling Tile of 0.595 mm x
0.595 mm of 15 mm thick Speckle 1 607
636 MAT-01320 BMT-M.85 Model Sqm

Mineral Fibre Ceiling Tile of 0.595 mm x

0.595 mm of 15 mm thick Textura 1 869
637 MAT-01321 BMT-M.86 Model Sqm

Supply and fixing of PVC false ceiling

on MS/GI made skeleton framework.
The frame shall be 24 X 48mm MS tube
section fixed along with the wall. The
entire frame work shall be concealed
with PVC section having overall
638 dimensions of 6 X 250mm with a wall 1 1532
thickness of 1mm ± 0.3mm with tongue Sqm.
and groove system, provided with
MAT-01322 BMT-M.87
necessary arrangements for electrical
connections, complete, for finished item
of work.

Absorptive false ceiling

Supply and installation of 12.5mm thick
micro perforated gypsum plaster board
of 3mm square perforations (minimum
13% of perforated area) backed with
50mm thick 1000 GSM polyester wool
Construction of Frame work:
Frame work shall consists of GI
perimeter channels of size 0.55mm thick
(having one flange of 20mm and
another flange of 30mm) fixed along
with perimeter of the beam or walls with
the help of nylon sleeves and screws at
600mm c/c. Then suspend GI main
channels of size 45 mm (0.9mm thick
with 2 flanges of 15mm each) from the
1
639 BMT-M.96 soffit at 1200mm c/c by using soffit 2407
Sqm.
angle of size 25mm x 10mm x 0.55mm
thick fixed to true ceiling by using
suitable fasteners. Cross channels of
size 0.55mm thickness having knurled
web of 51.5mm and two flanges of
26mm each with lips of 10.5mm are
then fixed to the main channel with the
help of connecting clips and in a
direction perpendicular to the main
channel at 300mm c/c
Cavity Filling:
Ceiling frame work shall be back lined
by using polyester wool having density
of 1000 GSM and 50mm thick
Boarding:

76
 Basic Rate
S. No CFMS code Item Code Description of item for SoR
Unit
2024-25
(Rs.)

1 2 3 4 5
A layer of 12.5mm thickness fiber
reinforced micro perforated gypsum
plaster board of size 1200 x 2400 mm
having perforations of minimum of 13%
is fixed on to frame work. Micro
perforated gypsum boards used shall
have RH 90% and fire rating A2-s1, d0
Finishing: Ensure that board is fixed in
plumb level, screw fix gypsum plaster
board to channel, cover screw with
compound and sand the surface. Joints
of gypsum plaster board to be finished
by using jointing tapes and compound.
Final finishing is done with two coats of
acrylic emulsion paint.

Reflective false ceiling

Supply and installation of 12.5mm thick
plain gypsum plaster board
Construction of Frame work:
Frame work shall consists of GI
perimeter channels of size 0.55mm thick
(having one flange of 20mm and
another flange of 30mm) fixed along
with perimeter of the beam or walls with
the help of nylon sleeves and screws at
600mm c/c. Then suspend GI main
channels of size 45 mm (0.9mm thick
with 2 flanges of 15mm each) from the
soffit at 1200mm c/c by using soffit
angle of size 25mm x 10mm x 0.55mm
thick fixed to true ceiling by using
suitable fasteners. Cross channels of
size 0.55mm thickness having knurled
1
640 BMT-M.97 web of 51.5mm and two flanges of
26mm each with lips of 10.5mm are Sqm
then fixed to the main channel with the
help of connecting clips and in a
direction perpendicular to the main
channel at 300mm c/c. 3391
Boarding:
A layer of 12.5mm thickness Plain
gypsum plaster board of size 1200 x
2400mm having minimum density
550kg/m3 is fixed on to frame work.
Finishing:
Ensure board is in plumb level, screw fix
gypsum plaster board to channel, cover
screw with compound and sand the
surface. Joints of gypsum plaster board
to be finished by using jointing tapes
and compound. Final finishing is done
with two coats of acrylic emulsion paint.

77
 Basic Rate
Item for SoR
S. No CFMS code Description of item Unit
Code 2024-25
(Rs.)

1 2 3 4 5

Providing supply and fixing of eco-friendly

light weight calcium silicate false ceiling
system in module size of 600x600mm with
Galvanized iron powder coated 24mm T
grid system.
Eco friendly light weight calcium silicate
tiles shall be made of non-cementitious
hydrated wet molded calcium silicate
slurry, reinforced with fibers and natural
fillers. Free from formaldehyde and other
harmful materials. Does not contain any
toxic ingredients. Tiles shall be GRIHA
accredited product suitable for green
building applications.
False ceiling tiles shall have following
properties:
(a). Surface: All tiles are prime coated on
both sides.
Standard factory finish in two coats white
dispersion type, solvent free paint.
(b). Dimensions: 595x595x15mm thick
integral densified tegular/butt edged. Size
referred to are always module sizes.
(c). Thickness: 15mm thick integral
densified tegular/butt edges with 26mm
wide collar at all around the edge resting
portion and 10mm thick at quadrant of the
body size of 543x543mm.
(d). Density of material: 350 kg/m3 at the 1
NEW ITEM 1265
quadrant 10mm thick portion and 450 Sqm
kg/m3 at all around the integral densified
edges. (Average density 370 kg/m3 as per
ECBC code 2017).
(e). Relative Humidity: 100% RH as per
ASTM C 473-03.
(f). Fire resistance: Non-combustible as
per BS 476 part 4, Fire performance as
per BS 476 Part 6 for fire propagation &
class 1 as per BS 476 part 7 for surface
spread of flame.
(g). Thermal conductivity: 0.048 W/mK to
0.052 W/m²K as per IS 3346/1980 and as
per ECBC code 2017.
(h). Recycled content: shall have 46-50%
recycled content.
(i). Acoustic control: Sound Attenuation 30-
32dB. Noise reduction coefficient (NRC)
as per IS 8225:1987 for semi perforated
tile: 0.5 for fully perforated tile: 0.75
(j).Light reflectance:>85%.
(k).Weight:5-5.5kg/m2.
False ceiling tiles shall be laid in true
horizontal level suspended on inter locking
metal T grid hot dipped galvanized iron
sections of 0.33mm sheet of thickness
galvanized @ 120 grams per sqm
including all sides comprising of main T
runners of size 24x38mm of length
78
 3000mm, cross T of size 24x32mm of
length 1200mm and secondary
intermediate cross T of size 24x32mm of
length 600mm to form grid grid module of
size 600x600mm. This grid shall be
suspended from ceiling using GI slotted
cleats of size 25x35x1.6mm fixed to ceiling
with 12.5mm dia and 50mm long dash
fasteners connected to 4mm Gl adjustable
rods with galvanized steel level clips of
size 85x30x0.8mm spaced 1200mm
Centre to Centre fixed to main T runner.
Frame also consist of Gl perimeter wall
angle of size 24x24x0.40mm of length
3000mm to be fixed on periphery
wall/partition with the help of plastic rawl
plugs at 450mm Centre to Centre and
40mm long dry wall SS screws. The work
shall be carried out as per specifications,
drawing and as per directions of the
Engineer- in-charge.

Providing, supply and fixing of eco-friendly

light weight calcium silicate false ceiling
system in module size of 600x600mm with
Galvanized iron Silhouette profile black
reveal powder coated 15mm T grid
system. Eco friendly light weight calcium
silicate tiles shall be made of non-
cementitious hydrated wet molded calcium
silicate slurry, reinforced with fibers and
natural fillers. Free from formaldehyde and
other harmful materials. Does not contain
any toxic ingredients. Tiles shall be GRIHA
accredited product suitable for green
building applications.
False ceiling tiles shall have following
properties:
(a).Surface: All tiles are prime coated on
both sides. Standard factory finish in two
coats white dispersion type, solvent free
paint.
(b). Dimensions: 595x595x15mm thick 1
NEW ITEM 1536
integral densified micro look edged. Size Sqm
referred to are always module sizes.
(c). Thickness: 15mm thick integral
densified micro look edges with 26mm
wide collar at all around the edge resting
portion and 10mm thick at quadrant of the
body size of 543x543mm.
(d). Density of material: 350 kg/m3 at the
quadrant 10mm thick portion and 450
kg/m3 at all around the integral densified
edges. (Average density 370 kg/m3 as per
ECBC code 2017).
(e). Relative Humidity: 100% RH as per
ASTM C 473-03.
(f). Fire resistance: Non-combustible as
per BS 476 part 4, Fire performance as
per BS 476 Part 6 for fire propagation &
class 1 as per BS 476 part 7 for surface
spread of flame.
(g). Thermal conductivity: 0.048 W/mK to
0.052 W/m²K as per IS 3346/1980 and as

79
 per ECBC code 2017.
(h). Recycled content: shall have 46-50%
recycled content.
(i). Acoustic control: Sound Attenuation 30-
32dB.Noise reduction coefficient (NRC) as
per IS 8225:1987for semi perforated tile:
0.5for fully perforated tile: 0.75.
(j). Light reflectance: >85%. (k). Weight: 5-
5.5kg/m2.
False ceiling tiles shall be laid in true
horizontal level suspended on inter locking
metal T grid silhouette black reveal profile
of hot dipped galvanized iron powder
coated sections of 0.40 mm sheet
thickness galvanized @ 120 grams per
sqm including all sides comprising of main
T runners of size 15x42mm of length
3000mm, cross T of size 15x42mm of
length 1200mm and secondary
intermediate cross T of size 15x42mm of
length 600mm to form grid module of size
600x600mm. This grid shall be suspended
from ceiling using Gl slotted cleats of size
25x35x1.6mm fixed to ceiling with 12.5mm
dia and 50mm long dash fasteners
connected to 4mm Gl adjustable rods with
galvanized steel level clips of size
85x30x0.8mm spaced 1200mm Centre to
Centre fixed to main T runner. Frame also
consist of Gl perimeter wall angle of size
22x19x0.40 mm of length 3000mm to be
fixed on periphery wall/ partition with the
help of plastic rawl plugs at 450mm Centre
to Centre and 40mm long dry wall SS
screws. The work shall be carried out as
per specifications, drawing and as per
directions of the Engineer-in-charge.

Providing, supply and fixing of Anti-

Microbial Bio-Safe coated eco-friendly light
weight calcium silicate false ceiling system
in module size of 600x600mm with
Galvanized iron powder coated 24mm T
grid system.Eco friendly light weight
calcium silicate tiles shall be made of non-
cementitious hydrated wet molded calcium
silicate slurry, reinforced with fibers and
natural fillers. Free from formaldehyde and
other harmful materials. Does not contain
any toxic ingredients. Tiles shall be GRIHA
accredited product suitable for green 1
NEW ITEM 1360
building applications. Tiles shall have Anti- Sqm
Microbial Bio-Safe Coating on front and
back sides of tiles and found to be
completely protected from Bacteria, Fungi,
Yeast, and Mold when exposed to these
organisms both room temperature and AC
temperature. Tiles should be protected
and is free from colony forming units. Anti-
microbial Bio-

Safe coated tiles shall have following

properties: (a). Surface: All tiles are prime
coated on both sides. Standard factory

80
 finish in two coats white dispersion type,
solvent free paint.

(b). Dimensions: 595x595x15mm thick

tegular/butt edged. Size referred to are
always module sizes.

(c). Thickness: 15mm thick integral

densified tegular/butt edges with 26mm
wide collar at all around the edge resting
portion and 10mm thick at quadrant of the
body size of 543x543mm.

(d). Density of material: 350 kg/m3 at the

quadrant 10mm thick portion and 450
kg/m3 at all around the integral densified
edges. (Average density 370 kg/m3 as per
ECBC code 2017).

(e). Relative Humidity: 100% RH as per

ASTM C 473-03.

(f). Fire resistance: Non-combustible as

per BS 476 part 4, Fire performance as
per BS 476 Part 6 for fire propagation &
class 1 as per BS 476 part 7 for surface
spread of flame.

(g). Thermal conductivity: 0.048 W/mK to

0.052 W/m²K as per IS 3346/1980 and as
per ECBC code 2017.

(h). Recycled content: shall have 46-50%

recycled content.(i).

Sound Attenuation: 30-32dB.

(j). Light reflectance: >85%.(k). Weight: 5-

5.5kg/m2.

(1). Antibacterial activity and efficacy

value: shall have more

than 2.0 as per JIS-Z2801 (m). Fungal

growth: no fungal growth observed with
rating 0

as per ASTM G-21. False ceiling tiles shall

be laid in true horizontal level suspended
on inter locking metal T grid of hot dipped
galvanized iron sections of 0.33mm sheet
thickness galvanized @ 120 grams per
sqm including all sides comprising of main
T runners of size 24x38mm of length
3000mm, cross T of size 24x32mm of
length 1200mm and secondary
intermediate cross T of size 24x32mm of
length 600mm to form grid module of size
600x600mm. This grid shall be suspended
from ceiling using GI slotted cleats of size
25x35x1.6mm fixed to ceiling with 12.5mm
dia and 50mm long dash fasteners
connected to 4mm Gl adjustable rods with
galvanized steel level clips of size
85x30x0.8mm spaced 1200mm Centre to
81
 Centre fixed to main T runner. Frame also
consist of Gl perimeter wall angle of size
24x24x0.40mm of length 3000mm to be
fixed on periphery wall/partition with the
help of plastic rawl plugs at 450mm Centre
to Centre and 40mm long dry wall SS
screws. The work shall be carried out as
per specifications, drawing and as per
directions of the Engineer-in-charge.

FALSE CEILINGs- SECTIONS &ACCESSORIES

II.SUB- SECTION

G.I. Ceiling Angle - 25 mm x 10 mm x

641 0.55 mm
MAT-01239 BMT-M.04 1 RM 80

G.I. Ceiling Section 51.5 mm x 26 mm x

642 MAT-01240 BMT-M.05 10.5 mm x 0.55 mm thick 1 RM 110

G.I. Intermediate Section 45 mm x 15

643 MAT-01241 BMT-M.06 mm x 15 mm x 0.9 mm 1 RM 81

G.I. Perimeter Channel - 20 mm x 27

644 MAT-01242 BMT-M.07 mm x 30 mm (web) of 0.55 mm thick 1 RM 72

G.I.-Precoated Fine line Grid 25 mm x

645 MAT-01243 BMT-M.08 25 mm x 0.7 mm 1 RM 65

G.I.-Precoated Fine line Grid 15 mm x

646 MAT-01244 BMT-M.09 25 mm x 0.7 mm 1 RM 59

GI - Precoated - T-Sec- 24 mm x 38 mm
647 MAT-01245 BMT-M.10 x 0.7 mm thick 1 RM 63

Hot dipped GI Angle - Precoated - Grid:

648 MAT-01246 BMT-M.11 19 mm x 19 mm 1 RM 38

Polyester painted GI - T Section - 24 x

649 MAT-01247 BMT-M.12 32 mm 1 RM 55

Polyester painted GI - T Section - 24 x

650 MAT-01248 BMT-M.13 25 mm 1 RM 50

Polyester painted GI - T Section - 24

651 MAT-01249 BMT-M.14 mm x 27 mm 1 RM 51

Aluminium Angle : 24 mm x 24 mm
652 MAT-01250 BMT-M.15 1 RM 34
Anodised Aluminium T Section : 24 x
653 MAT-01251 BMT-M.16 24.5 x 2.4 mm 1 RM 34

Connecting Clips 1
654 MAT-01252 BMT-M.17 11
Each

82
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

655 1
MAT-01253 BMT-M.18 Rawl Plug 4
Each

656 1
MAT-01254 BMT-M.19 6 mm Nylon Rawl Plug 4
Each

657 1
MAT-01255 BMT-M.20 Soffit Cleats 5
Each

658 1
MAT-01256 BMT-M.21 Drywall Screws - 25 mm 4
Each
659 MAT-01257 BMT-M.22 Jointing Compound 1 Kg 33
660 MAT-01258 BMT-M.23 Jointing Paper Tape 1 RM 6.24
661 MAT-01259 BMT-M.24 Drywall Top Coat 1 Litre 156

662 1
MAT-01260 BMT-M.25 Universal Holding Clips 4.16
Each
4 mm Dia GI Connecting Rod
663 MAT-01261 BMT-M.26 1 RM 15

2 mm Dia GI Connecting Rod

664 MAT-01262 BMT-M.27 1 RM 10

III.SUB- SECTION WALL PANELLS & WALL LININGS

Providing wooden panelling 12 mm thick

one side laminated sheet fixed on
wooden frame of BT wood size 50.8 mm
x 25.4 mm (2"x1") at distance of
609.6mm (2'-0") intervals of both ways
665 1749
providing 3/4" x 1/2" (19.05 mm x 12.7
1
MAT-01274 BMT-M.39 mm) size BT wood ornamental cover
Sqm
beading and necessary screws, fevicol
glue complete for finished item of work.

Perforated wall panels channeled wood

works sheets of width 128 mm,
thickness of 16mm and length 2440 mm
made of a high density particle board
substrate with a laminated facing as
per the approved shade /Species &
Finish and a melamine balancing layer
666 on the reverse side, with a special
perforation pattern fluted perforation on 2779
the visible surface with a minimum sag
resistance of RH90 and a fire rating 1
MAT-01267 BMT-M.32 class of 1 as per Part 7 of BS 476 with a Sqm
“tongue-and-grooved” edges and the
back of the perforated panel is with
sound absorbing non-woven acoustical
fleece
Supply and fixing of wall panelling
667 (water, fire and Termite proof) with 1 1106
MAT-01300 BMT-M.65 frame work made of GI stud profile of Sqm.
size 48 x 40x10 x 0.6 mm thick placed

83
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
at every 610 mm C/C intervals fixed
vertically in between floor and roof `U’
track of size 50 x 30 x 0.6 mm thick duly
fixed with self expansion screws and
with 8 mm thick E-board / 6 mm thick E-
board classic cladded around with self
tapping self embedding screws fixed at
every 300 mm (centres) leaving a 3 mm
gap between two panels of width 2’-0”.
The Gap will be covered with a
decorative beading. Surface will be
given a smooth finish over a coat of
primer. - With 8 mm Designer CEMEMT
BONDED BOARD
668 MAT-01301 BMT-M.66 ITEM DELETED
Supply and fixing CEMENT BONDED
PARTICLE BOARDS(IS 14276) wall
paneling using 10 MM CEMENT
BONDED PARTICLE BOARDS with
frame work made of GI stud section of
size 48mm x 35mm x 0.55mm thick
placed at every 610 mm C/C intervals
vertically and at 1200mm internals
horizontally fixed to the wall by means of
669 self expansion screws and caps. 1454
CEMENT BONDED PARTICLE
BOARDS is to be fixed to frame by 1
means of self taping screws placed at Sqm
MAT-01306 BMT-M.71 every 300 mm intervals leaving 3mm
gap between two panels. The cost
inclusive of one coat o primer and two
coats of smooth finish and cost &
conveyance of all materials, labor
charges etc. complete as per the
direction of Engineer in charge.
Supply and fixing of CEMENT BONDED
PRE-LAMINATED PARTICLE BOARDS
wall paneling using 12 MM CEMENT
BONDED PRE-LAMINATED PARTICLE
BOARDS with frame work made of G.I
stud section of size 48mm x 35mm x
0.55mm thick placed at every 610mm
intervals vertically and at 1200mm
670 internals horizontally fixed to the wall by 2010
means of self expansion screws and
caps. LAM is to be fixed to frame by 1
means of self-taping screws placed at Sqm
MAT-01309 BMT-M.74
every 300mm intervals leaving 3mm gap
between two panels. The cost inclusive
of Conveyance of materials, Labor
charges etc., complete as per the
direction of Engineer in charge
671 MAT-01312 BMT-M.77 Providing and fixing INSULATED PVC 1 Sqm 2025

84
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
WALL PANELING shall consist of PVC
insulated panels having wall thickness
of 1mm /1.5mm/2mm PVC sheet and
the desired thickness of EPS
(dependent on the insulation required)
screwed into the wall using screws of
adequate length. The screws shall be
placed at a distance of 150mm and shall
be 25mm from the edge of the insulated
panel on all from sides of the panel. The
PVC strips of 5mm thick PVC sheet of
width 75mm feathered at the edges
shall be stuck using solvent cement
adhesive at the places where two
panels are joined, so a to cover the
screw of both the panels, using solvent
cement. 90 heat bent strips of 5mm
thick PVC sheets of width 75mm
X75mm feathered at the edges shall be
stuck at wall joints / pillars etc. ,
complete as per direction of Engineer-
in-Charge, manufacture’s specification &
drawing
Providing and fixing plain PVC rigid
foam sheet wall panelling of thickness
5mm consisting of panels having size
1220mm X2440mm stuck on inner
frame work of 25mm wide strips of 5mm
thick PVC rigid foam sheet. The strips
should have in their centre a grove of
6mm width and 2mm depth for sinking
the head of the screw used to fix the
strips to the wall and should be placed
vertically at equal intervals of
405/407mm centre to c entre. The PVC
strips shall be fixed to the wall using
65mm long M.S. screws through the
groove in the strip by using PVC
fasteners. The distance between two
screws shall not be more than 300mm.
a groove of 2mm may be left at the joint
of two panels for aesthetic looks. This
framework is done for making existing
wall surface in ensured level and for
MAT-01313 BMT-M.78 sticking the wall panelling sheet (panel) 1 Sqm 1999
672
on it. The exact size of the panel and
correspondingly of the grid May be
varied depending n the size of the wall.
However it must be ensured that a strips
of 5mm thick PVC sheet of width 75mm
feathered at the edges shall be stuck at
the places where two panels are joined,
using solvent cement. , complete as per
direction of Engineer-in-Charge,

85
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
manufacture’s specification & drawing
Supply and fixing of wall panelling on
the framework of wooded rippers of 24
X 24mm of required size. The entire
framework shall be panelled with PVC
section having overall dimensions of 6 X
250mm with a wall thickness of 1mm ± 1496
0.3mm. The panels are joined with 1
673 MAT-01323 BMT-M.88 tongue and groove system. Necessary Sqm.
cut-outs for electrical connections to be
provided at required places complete,
for finished item of work.
Supply and fixing of wall lining fixing to
GI channels of perimeter channel 30mm
x 27mm x 0.55 thick and ceiling
channels of 51.1mm x 26mm x 10.5mm
x 0.55mm thick and fixing and finishing
using joint compound and glass fibre
tape complete finish as per specification
without painting for finished item of
work:
A) using 8mm thick Calcium silicate 1
674 MAT-01282 BMT-M.47 847
boards Sqm
B) Using 10mm thick Calcium silicate 1
675 MAT-01283 BMT-M.48 931
boards Sqm
C) Using 12mm thick Calcium silicate 1
676 MAT-01284 BMT-M.49 boards Sqm 1024

Providing and fixing in position wall

panelling to all heights with eco friendly
light weight calcium silicate panels/tiles
Globe Design of size 595mm x 595mm
having square/butt edge having
NRC(Noise Reduction Coefficient) of 0.5
to 0.75 as per IS 8225:1987, Light
reflectance of 85%(minimum), Non
Combustible as per BS:476 (part-4), fire
performance as per BS:476 (part-6&7),
humidity resistance of 100% and
thermal conductivity < 0.043 W/m K as
677 BMT-M.95 per ASTM 518:1991, comprising of a 2285
frame made from especially fabricated
galvanised mild steel sheet 0.50 mm
thick pressed section (galvanizing @120
grams per sqm including both sides)
MAT-05430 1
i.e.vertical studs of size 48 x 34 x 36
Sqm
mm are placed at 600mm center to
center in a floor and ceiling channel
section of size 50 x 32m fixed to the
floor and soffit at 600mm centers using
12mm dia,50mm long wedge type
expanded zinc alloy dash fastner with
10mm bolt. Glasswool of 50mm

86
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
thickness is then to be inserted in the
slots and finally calcium silicate non
combustible panels/tiles are to be
screwfixed with self tapping pan head
nickel coated mild steel screws of size
13 x 3.2mm on to this grid leaving an
even groove of 1 mm between the
panels.
The joints between the panels are to
beduly jointed and finished using
recommended jointing calcium silicate
based compound & fiber joint tape roll
50mm wide (90 metre )roll and two
coats of primer suitable for panelling
as per manufacturer's specification as
perdirection of Engineer-in-Charge all
complete.(With 15 mm thick integral
densified fully perforated light weight
calcium silicate panels/tiles)
Wall-Absorptive wall panelling
Supply and installation of 17mm thick
micro perforated wood having 2mm
perforation and 8mm pitch backed
with polyester wool of density
1000GSM x 50mm thick with
Laminared finish
Construction of Frame work:
Frame work consists of 25mm thick GI
wall channels with fully knurled
surface of 0.55mm thick 80mm width,
having two equal flanges of 26mm. A
GI wall channel is fixed to the walls in
horizontal direction with the help of
suitable fastners at 600mm c/c then
another 25mm thick GI wall channel is
fixed vertically over the horizontally
laid wall channel at 600mm c/c
678 BMT-M.98 Cavity Filling:
1 5090
The frame work shall be back lined by
using polyester wool having a density Sqm
of 1000 GSM and 50mm thick
Boarding:
17mm thick micro perforated wood
having 2mm perforation and 8mm
pitch is fixed on the frame work.
Finishing:
Ensure board is in plumb level and
screw heads to be covered with
compound and sand the surface. The
screws are painted with manufacturer
supplied paint matching the colour of
the board/panel. The finishing of
board is of veneer finish.

87
 Basic Rate
for SoR
S. No CFMS code Item Code Description of item Unit
2024-25
(Rs.)
1 2 3 4 5
Wall-Reflective wall panelling
Supply and installation of 12 mm thick
B.W.P ply finished with 1 mm thick
laminate on all visible sides backed
with 50mm thick 1000 GSM polyester
wool insulation
Construction of Frame work:
Frame work consists of minimum
50mm GI stud with fully knurled
surface of 0.55 mm thick, 50mm width
and two equal flanges of 34mm is
fixed on to the GI support made of
required height, First the wall plate is
fixed on to the wall using suitable
fastners at every 1200mm C/C in both
the directions and an MS hollow box
section of 40mmx40mm with 5mm
thick is welded to the wall plate, this is
used to give the support to the MS
679 gride of 600mmx600mm which is 3363
placed at a distance of 480mm from
BMT-M.99 1
the wall.
Sqm
Cavity Filling:
The frame work shall be back lined by
using polyester fiber having a density
of 1000 GSM and 50mm thick held in
position by using GI weld mesh
Boarding:
12mm thick Laminared plywood (8mm
plywood and 1mm laminate) of
approved finish is then fixed to GI
frame work by using suitable fasteners
and ensure proper level of the panel
surface.
Finishing:
Ensure plywood is in plumb level and
finish by using laminate of approved
shade and colour

Supply and installation of 17mm thick

micro perforated wood having 2mm
perforation and 8mm pitch backed
with polyester wool of density
1000GSM x 50mm thick with
Laminated finish
Construction of Frame work: Frame
work consists of 25mm thick GI wall 1
680 channels with fully knurled surface of 5779
Sqm
0.55mm thick 80mm width, having two
equal flanges of 26mm. A GI wall
channel is fixed to the walls in
horizontal direction with the help of
suitable fasteners at 600mm c/c then
an another 25mm thick GI wall
channel is fixed vertically over the
horizontally laid wall channel at

88
 600mm c/c. Cavity Filling: The frame
work shall be back lined by using
polyester wool having a density of
1000 GSM and 50mm thick. Boarding;
17mm thick micro perforated wood
having 2mm perforation and 8mm
pitch is fixed on the frame work.
Finishing : Ensure board is in plumb
level and screw heads to be covered
with compound and sand the surface.
The screws are painted with
manufacturer supplied paint matching
the color of the board/panel. The
finishing of board is of veneer finish.
Note : 1. Vendors to submit all test
certificates (Acoustics and fire),2.
Refer drawings for over all depth of
the system

Supply and installation of 12 mm thick

B.W.P ply finished with 1 mm thick
laminate on all visible sides backed
with 50mm thick 1000 GSM polyester
wool insulation. Construction of Frame
work : Frame work consists of
minimum 50mm GI stud with fully
knurled surface of 0.55 mm thick,
50mm width and two equal flanges of
34mm is fixed on to the GI support
made of required height, First the wall
plate is fixed on to the wall using
suitable fasteners at every 1200mm
C/C in both the directions and an MS
hallow box section of 40mmX40mm
with 5mm thick is welded to the wall 4001
plate, this is used to give the support 1
to the MS gride of 600mmX600mm Sqm
which is placed at a distance of
480mm from the wall. Cavity Filling :
The frame work shall be back lined by
using polyester fiber having a density
of 1000 GSM and 50mm thick held in
position by using GI weld mesh
Boarding : 12mm thick Laminated
plywood (8mm plywood and 1mm
laminate) of approved finish is then
fixed to GI frame work by using
suitable fasteners and ensure proper
level of the panel surface.Finishing :
Ensure plywood is in plumb level and
finish by using laminate of approved
shade and color

Supply and fixing of 50 mm Thick wall

panels (sandwich wall panels) with 5 mm
thick Cement bonded particle boards 1
681 BMT-M.100 986
Sqm
Facings and light weight EPS concrete
core materials

89
 Supply and fixing of 75 mm Thick wall
panels (sandwich wall panels) with 5 mm
thick Cement bonded particle boards 1
682 BMT-M.101 1480
Sqm
Facings and light weight EPS concrete
core materials

Basic Rate
Description of item for SoR
S. No CFMS code Item Code Unit 2024-25
(Rs.)

1 2 3 4 5

Supply and fixing of Pre-Laminated

Cement Bonded Particle Board (Bison
1
683 BMT-M.102 1201
Lam) Conformir 15786 - 18 Mm Thick Sqm

Supply & erection of open shelves using

cement bond particle board (Bison
Panel) confirming to IS 14276 with 20mm
thick t for sides & shelves, 8mm back 1
684 BMT-M.103 2219
Sqm
liner with 15 "depth, Each shelf height
12" to 15" with all hardware screws &
nails

IV PARTITIONS

Supply & fixing 75mm thick metal stud

partition using 12.5 mm thick
Gypboard conforming to IS 2095-1982
screw fixed to either side to 48 mm
studs of 0.55 mm thick with the 50
mm floor andceiling channel 0.55 mm
and the joints duly finished with joint 1165
compound, papertape and two coats 1
685 MAT-01273 BMT-M.38 Dry wall top coat as per specification. Sqm

Supply and Fixing 66mm thick metal

stud partition screw fixed to either side
of 48mm studs of 0.55mm thick with
50mm floor and ceiling channel
0.55mmand the joints duly finished
686 with joining compound, glass fibre 1338
tape and two coats dry wall top coat 1
MAT-01279 BMT-M.44 as per specification finished Item of Sqm
work- using 8mm thick Calcium
silicate boards

90
 Supply and Fixing 66mm thick metal
stud partition screw fixed to either side
of 48mm studs of 0.55mm thick with
50mm floor and ceiling channel
687 0.55mmand the joints duly finished 1454
with joining compound, glass fibre
tape and two coats dry wall top coat 1
MAT-01280 BMT-M.45 Sqm
as per specification finished Item of
work - Using 10mm thick Calcium
silicate boards

Basic
Rate for
S. No CFMS code Item Code Description of item Unit
SoR 2024-
25 (Rs.)

1 2 3 4 5

Supply and Fixing 66mm thick metal

stud partition screw fixed to either side
of 48mm studs of 0.55mm thick with
50mm floor and ceiling channel
0.55mm
688 and the joints duly finished with joining 1 1678
MAT-01281 BMT-M.46 compound, glass fibre tape and two Sqm
coats dry wall top coat as per
specification finished Item of work -
Using 12mm thick Calcium silicate
boards

Supply and Fixing 66mm thick metal

stud partition using 2 layers of 12mm
thick Calcium silicate boards screw
fixedto either side to 48mm studs of
0.55mm thick with 50mm floor and
ceiling channel 0.55mm.The boards
joints are to be staggered to avoid
through passage. Ceramic wool of
689 50mm thick, 64kg/m3 density is to be 4154
placed in cavityof the partition. The
joints duly finished with joining 1
MAT-01285 BMT-M.50 compound, glass fibre tape and two Sqm
coats dry wall top coat as per
specification with out painting for
finished item of work

91
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Supply and fixing double skin CEMENT
BOARD partition with Frame work made
of GI stud profile of size 48 x 40 x 10 x
0.6 mm thick placed at every 610 mm
C/C intervals and 915 mm horizontal
intervals duly fixed with self expansion
screws, the E-board of 8 mm thick
cladded around with self tapping self
embedding screws fixed at every 300 1880
mm (centres) leaving 3 mm gap
between two panels of width 2’-0” (610
mm). The gap will be covered with 1
691 MAT-01302 BMT-M.67 decorative moulding surface will be Sqm.
given a smooth finish over cement
primer. The rate is inclusive of cost and
conveyance of all materials and labour
charges etc. complete.

Providing and fixing of 50mm thick

SOLID WALL PANEL Sandwich panels
made of light Weight FRACC two 4mm
thick non-asbestos fibre reinforced
cement sheets on either side of the
lightweight concrete core composed of
Portland cement binders with tongue
and groove arrangement. The bottom of
the panel shall be fixed to the floor
channel made up of 1 mm thick GI
channels of size 14x50x25 mm fixed to
the existing floor with 6x60mm nylon self
expansion screws at 600 mm C/C and
top of the panel fixed with ceiling
channel made out of 1mm thick GI
Channel of size 38x50x38mm duly fixed 1766
to the existing ceiling with 6x60mm
nylon self expansion screws at 600 mm
692 MAT-01303 BMT-M.68 1 sqm
C/C. All the tongue and groove joints of
the panels have to be properly cleaned
and both the panels have to be fixed by
applying the mixture of fly ash and
sodium silicate in between and Everest
jointing compound all the exposed
joints. The rate includes cost of 50mm
SOLID WALL PANELS, G.l. Floor and
ceiling channel. The panels can be
flushed by using paper tape and Everest
jointing compound all complete

92
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Providing and fixing of 75mm thick
SOLID WALL PANEL Sandwich panels
made of light Weight FRACC two 4mm
thick non-asbestos fibre reinforced
cement sheets on either side of the
lightweight concrete core composed of
Portland cement binders with tongue
and groove arrangement. The bottom of
the panel shall be fixed to the floor
channel made up of 1 mm thick GI
channels of size 14x75x25 mm fixed to
the existing floor with 6x60mm nylon self
expansion screws at 600 mm C/C and
top of the panel fixed with ceiling
channel made out of 1mm thick GI
2194
Channel of size 38x75x38mm duly fixed
to the existing ceiling with 6x60mm
nylon self expansion screws at 600 mm
C/C. All the tongue and groove joints of
the panels have to be properly cleaned
and both the panels have to be fixed by 1
693 MAT-01304 BMT-M.69
applying the mixture of fly ash and Sqm.
sodium silicate in between and Everest
jointing compound all the exposed
joints. The rate includes cost of 75mm
SOLID WALL PANEL panels, G.l. Floor
and ceiling channel. The panels can be
flushed by using paper tape and Everest
jointing compound all complete.

Supply and fixing CEMENT BONDED

PARTICLE BOARDS (IS 14276) double
skin partition using with 10 MM
CEMENT BONDED PARTICLE
BOARDS made out of G.I. track section
of size 50mmx 35mm x 0.55 mm for 1890
fixing to the roof and floor and stud
section of size 48mm x 35mm x 0.55mm 1
694 MAT-01307 BMT-M.72 placed in track section vertically at Sqm
610mm intervals and at 1200mm
intervals horizontally fixed to the wall by
means of self expansion screws and

93
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
caps to the wall and roof. CEMENT
BONDED PARTICLE BOARDS is to be
fixed both sides of frame work by using
self taping screws fixed at every 300mm
intervals to the frame work leaving 3 mm
gap between two panels. The cost
inclusive with one coat of primer and
two coats of smooth finish and cost and
conveyance of all materials to site, labor
charges etc., complete as per the
direction of Engineer in charge.
Supply and fixing of CEMENT BONDED
PRE-LAMINATED PARTICLE BOARDS
double skin partition using with 10 mm
CEMENT BONDED PRE-LAMINATED
PARTICLE BOARDS made out of G.I
track section of size 50 mm x 35mm x
0.55mm for fixing to the roof and floor
and stud section of size 48mm x 35mm
x 0.55mm placed in track section
vertically at 610mm intervals and at
1200mm internals horizontally. The 2925
frame is fixed by means of self
expansion screws and caps to the wall /
roof. LAM is to be fixed both sides of 1
695 MAT-01308 BMT-M.73 the frame work by using 2mm thick Sqm
electro plated CR flat section leaving
3mm gap between two panels. The cost
inclusive of cost and conveyance of all
materials to sites, other materials
incidentals and labour charges as per
the direction of Engineer in charges.
Supply and fixing of CEMENT BONDED
PRE-LAMINATED PARTICLE BOARDS
aluminum glazed partitions using 10 MM
CEMENT BONDED PRE-LAMINATED
PARTICLE BOARDS and 5 mm thick
plain glass to full height. Using with LAM
to a height of 0.91 meter at bottom
panel and remaining height with glass
and aluminum sections anodized to 12 3552
to 15 microns and of sections of size
37mm x 62mm and 1.5mm thickness
with one meter centre to centre duly 1
696 MAT-01310 BMT-M.75 Sqm
fixed with clip beading on both sides
including fixing the frame to pillars by
M.S. flats, bolts and nuts including cost
and conveyance of all materials etc.,
complete as directed during execution.
Providing and fixing 50mm thick SEMI
HEIGHT SOLID PVC PARTITION 3752
697 MAT-01311 BMT-M.76 consisting of 49mm sandwich PVC 1 sqm
panel made out of 36mm high density

94
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
expanded polystyrene sheet(E.P.S.-
Thermocole) stuck on both side with
2mm thick plain/printed /prelam PVC
rigid foam sheets reinforced with frame
work made from 35mmX5mm M.S.
Angle. In between two M.S. Angles
5mm thick plain/printed/prelam heat
moulded PVC ‘C’ channel of size
50X100mm with feathered edges shall
be fixed on the floor & 50X75mm with
feathered edges plain/printed /prelam
PVC ‘C’ channel. In between adjoining
EPS sandwiched PVC partitions panel
5mm thickX75mm width
plain/printed/prelam PVC sheet
feathered at edges shall be stuck on
front & back face using solvent cement
etc. in places where two partitions meet
to from an ‘L’ shape the panels are
joined 5mm thick plain/printed/prelam
heat moulded “Rajshri” PVC ‘L’ section
of size 75mmX75mm with feathered
edges shall be fixed on front & back
side. This is done to maintain the
symmetry of design. An additional 5mm
thick PVC strip of 40mm width is to be
stuck on the interior side of the ‘C’
Channel using PVC solvent adhesive,
complete as per direction of Engineer-
in-Charge, manufacture’s specification &
drawing
Supply and fixing of PVC Double Skin
Partition. The entire framework shall be
carried out by mild steel section having
overall dimensions of 24 X 48mm with a
wall thickness of 1.2mm. The entire
framework shall be concealed with PVC
section having overall dimensions of 6 X
250mm with a wall thickness of 1mm ±
0.3mm both sides. Glass 2643
698 MAT-01324 BMT-M.89 provision/Door provision can be Sqm.
provided along the partition wherever
required. Partitions can be made full or
half as per requirement complete, for
finished item of work.
Supply and fixing of partitions made of
seccolor pre-painted steel (base steel as
per IS 513 of 0.58 mm thick ‘D’ quality,
galvanized as per IS 277 with Zinc of
120 GSM). Primer coated with epoxy
primer of 5-7 microns thick, finish
painted with a polyester paint of 12-16
microns thick alkyd backer. Section for
outer frame should be 46x52mm,

95
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
section for shutter should be 46x46mm,
section for mullion should be 46x70mm,
section for beading should be 18x25mm
and section for middle and bottom rail
(Lock Rail and Kick Rail) of size should
be 23x130mm. The partition should be
paneled with 9mm pre-laminated
particle board to a height of 0.91m from
the bottom, and remaining height with
5mm thick plain glass With Ethyl
Propylene Diamine Monomer (EPDM)
Gaskets. The sections are to be cut to
length, mitre joined with corner bracket
Centre mullions are to be fixed using
mullion cap. Gaskets made of Ethyl
Propylene Diamine Monomer (EPDM).
Corner brackets made of CRCA with
zinc phosphate. Mullion caps made of
Glass filled nylon. The above frames
should be fixed to the concrete/masonry
wall by means of self expanding screws,
and complete for finished item of work.
Fixed Partition: Outer frame section
size of 46x52mm, mullion section should 5349
699 MAT-01325 BMT-M.90 be of 46x70mm, fixed beading should 1 sqm
be of 18x25mm.
Fixed Partition with Door: Outer frame
section size of 46x52mm, mullion
section should be of 46x70mm, fixed
beading should be of 18x25mm, section 5505
700 MAT-01326 BMT-M.91 for shutter should be of 46x46mm and 1 sqm
section for middle & bottom should be of
size 23x130mm.
DRY WALL PARTITION WITH 50 MM
THICK V-PANEL
CEMENT BONDED PARTICLE
PLANK- 8 mm- Available size-150 mm 1 659
701 MAT-01327 BMT-M.92 Sqm
X2440mm and 200mm X 2440mm
CEMENT BONDED PARTICLE PLANK-
10 mm- Available size-150 mm 1 703
702 MAT-01328 BMT-M.93 Sqm
X2440mm and 200mm X 2440mm
CEMENT BONDED PARTICLE
PLANK- 12 mm- Available size-150 1 937
703 MAT-01329 BMT-M.94 Sqm
mm X2440mm and 200mm X 2440mm
Note: Items BMT-M.33, BMT-M.34, and BMT-M.35 are
removed in the section M and are brought as new items in
the Section D as BMT-D.18, BMT-D.19 and BMT-D.20.

96
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
DOORS
(Landing cost – including loading, cost of
N.SECTION conveyance, unloading)
I.SUB- SECTION DOOR FRAMES

Powder Coated Mild Steel Hallow single

rebate door frames manufactured using
cold roll formed process steel sheet of
1.25 mm thick bright (Cold Rolled Close
Annealed (CRCA) and profile size of
105 x 60 mm conforming to IS 4351 -
2003 including pretreatment, Galvanized
as per IS:277, zinc phosphating finished
with Thermosetting Polyurethane paint
of Aliphatic Grade providing high levels
704 of scratch resistance and 850
MAT-05431 BMT-N.80 durability/Epoxy polyester powder for 1 RM
powder coating paint thickness 60 – 65
microns(Dry film thickness)Stainless
Steel Ball Bearing Butt Hinges 3 mm
thick fixed flush to the frame with
Hinges, Base Ties, Holdfast Lugs,
Mortar Guards, shock absorbers and
provision for Tower Bolts, Aldrops, Lock
& Strike plates etc. for both single and
double shutter doors
Mild Steel Hallow single rebate general
purpose door frames manufactured
using cold roll formed process steel
sheet of 1.25 mm thick bright (Cold
Rolled Close Annealed (CRCA) and
profile-B of size 105 x 60 mm
705 conforming to IS 4351 - 2003 including 470
MAT-05432
BMT-N.81 pretreatment, phosphating with Hinges, 1 Rm
Base Ties, Holdfast Lugs, Mortar
Guards, shock absorbers and provision
for Tower Bolts, Aldrops, Lock & Strike
plates etc. for both single and double
shutter doors
Providing and fixing factory made
polyvinyl chloride (PVC) Door Frame of
the size 50 x 47mm with a wall
thickness of 5mm, made out of extruded
10 mm rigid PVC foam sheet, mitre cut
at two corners and joined with 2nos. of
150mm long brackets of 15x15mm M.S.
square tube. The two vertical door
706 profiles are to be reinforced with 431
MAT-01330 BMT-N.01 19x19mm M.S. Square tube of 19 1 Rm
gauge. The door frame shall be fixed to
the wall using 65/100mm long M.S.
Screws through the frame by using PVC
fasteners. A minimum of 4nos. of
screws to be provided for each vertical
member & minimum 2nos. for horizontal
member etc. complete as per
97
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
manufacturers specification and
direction of Engineer-in-Charge for
finished item of work
SINGLE SIDE PRELAM SOLID PANEL
PVC DOOR FRAME (CHOUKHAT):
Providing and fixing factory made Pac
single side Prelam door frame of the
size 50X47 mm with a wall thickness of
5mm, made out of extruded 5mm rigid
Pac single side prelam sheet, meter cut
at two corners and joined with 2nos. of
150mm long brackets of 1515mm
MS.Square tube. The two vertical door
707 profiles are to be reinforced with 453
MAT-01334 BMT-N.05 19X19mm MS. square tube of 19guage. 1 Rm
The door frame shall be fixed to the wall
using 65/100mm long MS. Screws
through the frame by using Pac
fasteners. a minimum of 4nos. of screws
to be provided for each vertical member
and minimum 2nos. for horizontal
member etc. complete as per
manufacture specification and direction
of Engineer-in-charge.
Supply and fixing of door frame made of
hollow extruded PVC section having
dimensions of 40 X 57mm with the wall
708 thickness of 2mm +/- 0.2mm duly 262
reinforced with seasoned wood plank at 1 RM
MAT-01361 BMT-N.32 the hinges side. The door frame top 2
corners shall be metri-cut/ welded. PVC
DOOR FRAME
Supply and fixing of door frame made of
hollow extruded PVC section having
dimensions of 40 X 46 mm with the wall
709 thickness of 2mm +/- 0.2mm duly 242
1 RM
MAT-01362 BMT-N.33 reinforced with seasoned wood plank at
the hinges side. The door frame top 2
corners shall be mitre cut/welded
Supply & fixing of Door frames made of
all formed sections of 1.25mm thick
CRCA section, size should be 50x60mm
with 32mm rebate. The corner of the
frame should be welded. The frame
should be painted with one coat of
710 primer and finished painted with pure 295
MAT-01363 polyester paint. The frame should be
BMT-N.34
provided with approved quality butt 1RM
hinges of 3 Nos. complete for finished
item.: Single shutter 3'-0" x 7'-0"
(914.4x2133.6mm) outer frame section
size of 50 x 60 mm

98
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Supply & fixing of Door frames made of
all formed sections of 1.25mm thick
CRCA section, size should be 50x60mm
with 32mm rebate. The corner of the
frame should be welded. The frame
should be painted with one coat of
711 primer and finished painted with pure 295
polyester paint. The frame should be
MAT-01364 BMT-N.35 provided with approved quality butt 1 RM
hinges of 3 Nos. complete for finished
item.: Double shutter 5'-0" x 7'-0" (1524
x 2133.6mm) outer frame section size of
50 x 60 mm
Supplying & fixing of Door frame made
of roll formed section of 1.25 mm thick
CRCA section, size should be 50 x 60
mm with 32 mm rebate. The corner of
the frame should be welded. The frame
should be painted with one coat of
712 primer and finished painted with pure 335
polyester paint. The frame should be
MAT-01365 BMT-N.36 provided with approved quality butt 1 RM
hinges of 3 Nos. Complete for finished
item of work.: Single shutter 3'-0" x 7'-0"
(914.4x2133.6mm) outer frame section
size of 50 x 75 mm
Supplying & fixing of Door frame made
of roll formed section of 1.25 mm thick
CRCA section, size should be 50 x 60
mm with 32 mm rebate. The corner of
the frame should be welded. The frame
should be painted with one coat of
713 primer and finished painted with pure 335
polyester paint. The frame should be
MAT-01366 BMT-N.37 provided with approved quality butt 1 RM
hinges of 3 Nos. Complete for finished
item of work.: Single shutter 5'-0" x 7'-0"
(1524x2133.6mm) outer frame section
size of 50 x 75 mm
Providing and fixing door frames
fabricated from sections made of
galvanized steel powder coated (base
steel as per IS 513, galvanised as per IS
277 with zinc of 120 grams / square
metre), the factory made section are
714 powder coated with pure polyester 910
powder of 50-60 microns thick with total
coated thickness of 1.25 mm, size of
MAT-01367 BMT-N.38 door frame section is of 105 x 60 mm 1 RM
with a rebate of 38 mm to accommodate
35 mm thick door shutter, with groove to
insert gasket in the frame section, frame
section filled with polyurethane foam,

99
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
cut to length, and joined by way of
welding, each frame provided with: a)
2mm thick MS powder coated butt
hinges of 100 mm long – 3 Nos. for
single shutter, 6 Nos. for double shutter.
b) CRCA electroplates stiffeners of 6
Nos. – 3 in each vertical. c) 40 mm x
200 mm x 1.2 mm hold fasts screwed to
stiffeners – 6 Nos. with split end tail. d)
Nylon Aldrop Receiver – 1 No. for single
shutter frame. e)Tie Rod – 1 No
Providing and fixing of door frames
factory made, internal door frames
without threshold, fabricated from pre
painted cold roll formed section 100 mm
x 60 mm made of galvanized (base steel
as per IS-513 ‘D’ quality galvanized as
per IS-277 with Zinc of 120 Gms/sqm)
steel colour coated sections with total
coated thickness of 1 mm primer coated
with epoxy primer of 5-7 microns thick
finish painted with polyester paint of 12-
16 microns and back coated with alkyd
backer of 5-7 microns, the frame section
filled with polyurethane (PU Foam) of 40
kg/Cu.m and the sections cut to length
and mitre joined by means of 1.25 mm 594
thick CRCA electroplated corner
brackets of size 75 x 75 mm and 1.25
mm thick electroplated stiffeners of size
150 mm for fixing hold fasts and hinges
with MS Powder coated fittings a) 6 Nos
715 M.S. Z Type hold fasts made of 30 mm
MAT-01368 BMT-N.39 1 RM
x 3 mm MS flat of 230 mm long, 3 Nos
each size expandable PVC covered
screw type fasteners b) 2.5 mm x 300
mm long ‘T’ hinges /2.5 mm x 50 mm x
50 mm x 100 mm two way but hinges (3
Nos for single leaf or 2 Nos for Double
leaf/leaf) c) 12 mm dia MS tie rod at
bottom with necessary size of nuts on
either side.
Providing & fixing internal
prelaminated PVC door frame of size
100 x 45 mm with a wall thickness of
5mm, made of extruded 5 mm Prelam
PVC foam sheet, mitred cut at two
corners and joined with two nos. of 736
150mm long brackets of 15 x 15 mm MS
716 square tube, two vertical door profiles
MAT-01383 BMT-N.54 reinforced with 40 x 20 MS Tube of 19 1 RM
guage throughout the frame and the
door frame fixed to the wall using
65/100mm long MS screws through the

100
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
frame by using PVC fasteners with a
minimum of 3 nos of screws provided for
each vertical member and two nos. for
horizontal, etc complete as per
drawing and direction of Engineer in
Charge
PVC Door frame made out of PVC
material conforming to IS:10151:1982.
The door frame shall be made from
extruded PVC Section in overall
dimensions of 40mm x 48mm having
wall thickness of 1.1mm +/-0.3mm with
usual process variation corresponding to
Sintex code number RUPS 414. The
717 frame shall be Reinforced with special 266
polymeric reinforcement as shown in
drawing to take up necessary hardware. Per
MAT-01401 BMT-N.72 The corner joint shall be mitre cut and Rmt.
welded or joined by means of concealed
cleats with necessary screws fittings. A
tie rod to be provided at bottom.
[Laminated Profile]
Providing and fixing factory made solid
Wood Polymer Composite (WPC) single
718 extruded Door Frame section of size
BMT-N.83 with encapsulation of 8MM rigid layer on
all the six surfaces. The door frame will
have a rebat of 32MM.
Door Frame section of 45x75 MM . The
two Vertical members are to be joined
together with the horizontal member
using 8x50 MM long MS Star full thread
screws to be used with reverse forward
719 speed control hand drilling machine. 572
The ready/assembled door frame is
fixed to the wall using hold fast or bolt
MAT-05434 BMT-N.83.A fasteners. A minimum of 4 No.s of 1 Rm
screws to be provided for each vertical
member & minimum 2no.s for horizontal
member.
Door Frame section of 45x90 MM . The
two Vertical members are to be joined
together with the horizontal member
using 8x60 MM long MS Star full thread
screws to be used with reverse forward
720 speed control hand drilling machine. 803
The ready/assembled door frame is
fixed to the wall using hold fast or bolt
MAT-05435 BMT-N.83.B fasteners. A minimum of 4 No.s of 1 Rm
screws to be provided for each vertical
member & minimum 2no.s for horizontal
member.

101
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Door Frame section of 63.5x100 MM
.The two Vertical members are to be
joined together with the horizontal
member using 8x75 MM long MS Star
full thread screws to be used with
721 reverse forward speed control hand 953
drilling machine. The ready/assembled
door frame is fixed to the wall using hold
MAT-05436 BMT-N.83.C fast or bolt fasteners. A minimum of 4 1 Rm
No.s of screws to be provided for each
vertical member & minimum 2no.s for
horizontal member.
Supply and fixing of factory made
Bathroom door frames without
threshold, fabricated from pre-painted
cold roll formed section 50mm x 50 mm
made of galvanized (base steel as per
IS – 513 ‘D’ quality, galvanized as per
IS-277 with Zinc of 120 Gms/sqm) steel
colour coated sections with total coated
thickness of 1 mm, primer coated with
epoxy primer of 5-7 microns thick, finish
painted with polyester paint of 12-16
microns and back coated with alkyd
backer of 5-7 microns and the frame
section filled with polyurethane (P.U.
Foam) of 40 Kg/Cum; and the sections
cut to length and mitre joined by means
722 of 1.25mm thick CRCA electroplated 507
corner brackets of size 75 x 75 mm and
1.25mm thick electroplated stiffeners of
size 150mm for fixing hold fasts and
hinges together with the following MS
Power coated fitting (Supply and fixing)
of approved make.
MAT-05433 BMT-N.82 (a) 6 Nos M.S. Z. Type hold fasts made 1 RM
of 30mm x 3 mm MS flat of 230mm
long, 3 Nos each side expandable PVC
covered screw type fasteners.
(b) 2.5 mm x 300 mm long ‘T’ hinges /
2.5mm x 50 mm x 100mm two way but
hinges (3 Nos for single leaf or 2 Nos for
Double leaf /leaf ) (c) 12
mm Dia MS tie rod at bottom with
necessary size of nuts on either side.

II.SUB- SECTION DOOR SHUTTERS WITHOUTFRAMES

Flush door shutters, solid bond wood

block board type with teak ply on both 2152
723 MAT-01341 BMT-N.12 faces.: 25 mmthick conforming to 1 sqm
IS:2202
Flush door shutters, solid bond wood 2230
724 MAT-01342 BMT-N.13 block board type with teak ply on both 1 sqm

102
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
faces.: 30 mmthick conforming to
IS:2202
Flush door shutters, solid bond wood
block board type with teak ply on both 2397
725 MAT-01343 BMT-N.14 faces.: 35 mmthick conforming to 1 sqm
IS:2202
Flush door shutters, solid bond wood
block board type with commercial ply 1184
726 MAT-01344 BMT-N.15 on both faces.: 25 mmthick conforming 1 sqm
to IS:2202
Flush door shutters, solid bond wood
block board type with commercial ply on 1238
727 MAT-01345 BMT-N.16 both faces.: 30 mmthick conforming to 1 sqm
IS:2202
Flush door shutters, solid bond wood
block board type with commercial ply on 1507
728 MAT-01346 BMT-N.17 both faces.: 35 mmthick conforming to 1 sqm
IS:2202
Flush door shutters, solid bond wood
block board type with commercial ply on 1690
729 MAT-01347 BMT-N.18 both faces.: 40 mmthick conforming to 1 sqm
IS:2202
Flush door shutters, solid bond wood
block board type with teak veneer on
730 one face and commercial ply on 1778
MAT-01348 BMT-N.19 another face (lipping): 20 mmthick 1 sqm
conforming to IS:2202
Flush door shutters, solid bond wood
block board type with teak veneer on
731 one face and commercial ply on another 1906
MAT-01349 BMT-N.20 face (lipping): 25 mmthick conforming to 1 sqm
IS:2202
Flush door shutters, solid bond wood
block board type with teak veneer on
732 one face and commercial ply on another 1830
MAT-01350 BMT-N.21 face (lipping): 30 mmthick conforming to 1 sqm
IS:2202
Flush door shutters, solid bond wood
block board type with teak veneer on
733 one face and commercial ply on another 1998
MAT-01351 BMT-N.22 face (lipping): 35 mmthick conforming to 1 sqm
IS:2202
Flush door shutters, solid bond wood
block board type with teak veneer on
734 one face and commercial ply on another 2349
MAT-01352 BMT-N.23 face (lipping): 40 mmthick conforming to 1 sqm
IS:2202
Supply and fixing Cement Bonded 1 2132
735 MAT-01354 BMT-N.25 Particle Board (IS 14276) single door Sqm

103
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.).)
1 2 3 4 5
shutter using with 16MM Cement
Bonded Particle Board with all-round "U"
section of size 12mmx18mmx12mm
made from 0.6 mm thick galvanized,
color quoted cold rolled steel profiles
with necessary screws fixed at every
304.8 mm intervals. The cost inclusive
of MS Nickel coated Aldrops of size 255
mm long 2 Nos., 200 mm long tower
bolts 1 No., 125 mm handles 2 Nos. 300
mm long "T" hinge cost and conveyance
of all materials at site and applying 1
coat primer, 1 coat of luppum and 2
coats of synthetic enamel paint as per
approved design for finished item of
work.
Supply and fixing of Cement Bonded
Particle Board(IS 14276) door
shutters using with 16MM Cement
Bonded Particle Board with all round
style “U” size of 20mmx18mm x20mm
made from 0.6mm thick galvanized pre-
painted cold rolled steel profiles with
Cement Bonded Particle Board
separating two shutter with
30mmx18mmx30mm Stepped lipping
with necessary screws fixed at every 1’- 2148
0” (304.8mm) intervals. Ms Nickel
coated 250 mm long aldrops 2 no’s, MS
powder coated 250mm long tower bolt 1
736 MAT-01355 BMT-N.26 2no’s , & 2no’s MS powder coated 125 Sqm
mm long grip handle. Including cost and
conveyance of all materials at site and
applying one coat of primer, 2 coats of
lappum and 2 coats of synthetic enamel
paint as per approved design for
finished item of work.
Supply and fixing of CEMENT BONDED
PARTICLE BOARD double door
shutter using 16 MM CEMENT
BONDED PARTICLE BOARD LAM with
all round “U” section size of 20mm x
18mm x20mm made from 0.6mm thick
galvanized pre-painted cold ro steel
profiles with CEMENT BONDED
PARTICLE BOARD LAM separating two 3095
shutter with 30mm x lled 20mm x 30mm
stepped lipping with necessary
screws fixed at every 1’0” (304.8mm) 1
737 MAT-01408 BMT-N.79 Sqm
intervals. The cost inclusive of MS
Nickel coated 250mm long aldrops
2no’s, MS powder coated 125mm
long grip handle, 2 no’s M.S.P.C. Door
stopper. Including cost and conveyance

104
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
of all materials at site labor charges etc.,
complete finished item of work.
Supply and fixing of CEMENT BONDED
PRE-LAMINATED PARTICLE
BOARDS door shutter made out of U
sections of size 12x14x12 made from
0.6mm thick pps sections with 12MM
CEMENT BONDED PRE-LAMINATED
738 PARTICLE BOARDS with necessary 2544
screws fixed at every 1’.0”interwells.
The hardware consists of 250mm long 1
MAT-01359 BMT-N.30 aldrop – 2 Nos.150mm Handle- 1 No , Sqm
150 mm long ms powder coated tower
bolt 1 no. nickle coated. The cost is
inclusive of all incidentals, labor
transportation charges.
Supply and fixing of BOARD
(conforming toIS 14862) door shutter
with all-round style “U” lipping size 15 x
18 x 15 mm made from 0.8 mm thick
powder coated cold rolled steel profiles
with 16 mm thick V-BOARD with
necessary screws fixed at 1’-0” interval
739 250 mm long aldrops 2 nos. M.S. nickel 1530
coated 250 mm long 1 no. M.S. Tower
Bolts Including cost and conveyance of 1
MAT-01392 BMT-N.63 all materials at site and applying 1 coat Sqm
of primer, 2 coats of luppum and 2 coats
of synthetic enamel paint as per
approved design for finished item of
work.
Supply and fixing of Cement Bonded
Particle Board (IS 14276) LAM double
door shutter using 16 MM CEMENT
BONDED PRE-LAMINATED PARTICLE
BOARDS with all round “U” section size
of 20mm x 18mm x 20mm made from
0.6mm thick galvanized pre-painted cold
rolled steel profiles with Cement Bonded
Particle Board (IS 14276) LAM
740 separating two shutter with 30mm x 2132
20mm x 30mm stepped lipping with
necessary screws fixed at every 1’0”
(304.8mm) intervals. The cost inclusive
of MS Nickel coated 250mm long 1
MAT-01356 BMT-N.27
aldrops 2no’s, MS powder coated Sqm
125mm long grip handle, 2 no’s
M.S.P.C. Door stopper. Including cost
and conveyance of all materials at site
labour charges etc., complete finished
item of work.

741 Moulded panel solid core flush doors 1

MAT-01376 BMT-N.47 using water-resistant hardwood fibre Sqm 1778

105
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
HDF / MDF fibre boards skins of 2.5 mm
thick doors - 30 mm thick
Moulded panel solid core flush doors
742 using water-resistant hardwood fibre 1 1969
MAT-01377 BMT-N.48 HDF / MDF fibre boards skins of 2.5 mm Sqm
thick doors - 35 mm thick
Solid core membrane flush doors using
743 rigid PVC membrane of 0.3 mm thick of 1 1464
MAT-01378 BMT-N.49 different elegant shades doors - 30 mm Sqm
thick
Solid core membrane flush doors using
744 rigid PVC membrane of 0.3 mm thick of 1 1600
MAT-01379 BMT-N.50 different elegant shades doors - 35 mm Sqm
thick
Providing and fixing 35mm thick
BRAND FACTORY MADE MOULDED
DOOR SHUTTER consisting of sold
core single leaf flush door of 30mm
thickness, lipped with 15mm (5mmX3)
thick X 30mm width on one stiles and
top rails and 10mm (5mmX2) thick X
30mm width on the other stiles and
bottom rails. The inner panel laminated
with 2mm thick termite proof, water
745 proof and fire resistant moulded Pac 3100
sheet with 2,4,6 raised panel design in
different panel and / or prelam colours
on one side after routing the moulded
MAT-01335 BMT-N.06 design on flush door and 2mm prelam 1 sqm
Pac sheet on other side using rubber
adhesive on flush door and solvent
cement adhesive on Pac lipping etc.
complete as per direction of Engineer-
in-Charge, manufacture specification
and drawing
Supply and fixing of door shutters
made of rigid PVC extruded hollow
section of 20mm X 200 mm with the
wall thickness of 1.0mm +/- 0.1mm
equally divided into 4 no's with tongue
and groove locking arrangements. The
shutter frame is made of 30mm X
79mm with the wall thickness of 1.5mm
746 +/-0.15mm section mitre-cut and joined 1885
at 4 corners with 125mm X 225mm
plastic brackets. The shutter shall be
MAT-01360 BMT-N.31 horizontally reinforced with 2 no's of Sqm.
8mm PVC rods. Teak wood batons shall
be reinforced inside the door shutter
during the fabrication of the door shutter
at those points wherever the hardware
is fixed onto the door shutter.

106
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Supply & Fixing SOLID STEEL DOOR
door shutter made out of G I Precoated
Sheet with an average wall thickness of
0.35 mm on both sides. MS Tube having
dimensions of 19 x 19 mm is inserted
along the hinge side of the door, core of
the door shutter filled with High Density
747 Polyurethane foam injected with the
help of hydraulic injection method, four 1813
sides of the door covered with G I
Precoated Sheet and the hardware 1
MAT-01381 BMT-N.52 locations reinforced with suitable Sqm
wooden blocks as per drawing and
stickers indicating location of the
hardware pasted at appropriate places,
etc complete
Supply and fixing of BOARD
(conforming toIS 14862) 12 mm thick
door shutter of size 6’0” x 2’6” withall-
round style “U” lipping size 15 x 14 x 15
mm made from 0.8 mm thick powder
coated cold rolled steel profiles with
necessary screws fixed at 1’-0” interval
748 250 mm long aldrops 2 nos. M.S. nickel 1499
coated 250 mm long 1 no. M.S. Tower
Bolts Including cost and conveyance of 1
MAT-01393 BMT-N.64 all materials at site and applying 1 coat Sqm
of primer, 2 coats of luppum and 2 coats
of synthetic enamel paint as per
approved design for finished item of
work.
Providing of 35mm thick Facotry made
Prelaminated ABS (Acrolynitrile
Butadyne Styrene) Door shutter
moulded in different designs, consisting
of all round Frame made out of water
proof solid foam PVC bar of size
20x32mm, reinforced by 32x 32mm - 2
nos. for vertical made out of LVL
749 (Laminated Veneer Lumber), core 7010
material of 32 mm thick high density
craft paper honey comb board,
sandwiched on both sides with 1
MAT-01397 BMT-N.68 Sqm
prelaminated ABS sheet thickness of
1.5mm . PVC edge banding of size
0.45mm on the vertical sides.for each
shutter and ISI make S.S round lock
complete for finished item of work

III.SUB- SECTION DOORS WITH SHUTTERS & FRAMES

Providing and fixing 30mm thick Solid 2730

panel PVC door shutter consisting of 1
750 MAT-01331 BMT-N.02 Sqm
frame made out of M.S. tubes of 19

107
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
gauge thickness and size of 19mm x
19mm for stiles, & 15mm x 15mm for
top & bottom rails. M.S. frame shall
have a coat of steel primers of approved
make and manufacture. M.S. frame
shall be covered with 5mm thick heat
moulded PVC ‘C’ channel of size 30 x
50mm forming stiles, and 5mm thick,
75mm wide PVC sheets for top rail, lock
rail &bottom rail on either side, and
10mm (5mm x 2) thick, 20mm wide
cross PVC sheet as gap insert for top
rail & bottom rail. Panelling of 5mm thick
PVC sheet to be fitted in the M.S. frame
welded / sealed to the stiles & rails with
30mm wide x 5mm thick PVC sheet
beading on either side, and joined
together with solvent cement adhesive
etc. An additional 5mm thick PVC strip
of 20mm width is to be stuck on the
interior side of the ‘C’ Channel using
PVC solvent adhesive. Complete as per
direction of Engineer-in-charge,
manufacturer’s specification & drawing
for finished item of work .
Providing and fixing 30mm thick
BRAND FACTORY MADE BOTHSIDE
PRELAM SOLID PANEL PVC DOOR
SHUTTER consisting of frame made
out of MS. Tubes of 19gauge thickness
and size of 19mmX19mm for stiles, top
and bottom rails. MS. Frame shall have
a coat of steel primers of approved
make and manufacture. MS. Frame
covered with 5mm thick heat moulded
Prelam Pac ‘C’ channel of size 30mm
thickness, 70mm width out of which
50mm shall be flat and 20mm shall be
tapered in 450 angle on either side
forming stiles; and 5mm thick, 95mm
wide Prelam Pac sheet out of which
75mm shall be flat and 20mm shall be
tapered in 450 on the inner side to form
top and bottom rail 115mm wide Prelam
Pac sheet out of which 75mm shall be
751 MAT-01332 BMT-N.03 flat and 20mm shall be tapered on both 1 sqm
3039
sides to form lock rail. Top, bottom and
lock rail shall be provided either side of
the panel. 10mm (5mmX2) thick,
20mmwide cross Pac sheet shall be
provided as gap insert for top and
bottom rail. Panelling of 5mm thick both
side Prelam Pac sheet to be fitted in the
MS. Frame welded/ sealed to the stiles

108
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
& rails with 7mm(5mm+2mm) thick X
15mm wide Pac sheet beading on inner
side, and joined together with solvent
cement adhesive etc. an additional 5mm
thick Pac strip of 20mm width is to be
stuck on the interior side of the ‘C’
channel using Pac solvent cement
adhesive etc. complete as per direction
of Engineer – in-charge, manufacture
specification and drawing.
Providing and fixing 30mm thick
BRAND FACTORY MADE SOLID
SINGLE SIDE PRELAM PANEL PVC
DOOR SHUTTER consisting of frame
made out of MS. Tubes of 19gauge
thickness and size of 19mmX19mm for
stiles, and 15mmX15mm for top and
bottom rails. The MS. Frame shall have
a coat of steel primers of approved
make and manufacture. MS. Frame
covered with 5mm thick heat moulded
single side Prelam Pac ‘C’ channel of
size 30mmX50mm to form stiles.5mm
thick& 75mm wide single side prelim
Pac sheets shall be for the top, bottom
and lock rails. Panelling of 5mm thick
one side Pac sheet to be fitted in the
752 MS. Frame and sealed to the front
(prelam side) stiles and rails (which 2730
MAT-01333 BMT-N.04 should have a 5mm 45 bent portion as 1 sqm
beading) and attached to the
back(white/ivory) stiles and rails which
should have a 10mm 900 bent portion
as beading ) using 2nos. 15mm wide X
5mm thick Pac sheet beading inside the
90 bent beading. All stiles, rails and
beadings are to be joined to the panel
using solvent cement etc. an additional
5mm thick Pac strip of 20mm width to
be stuck on the interior side of the ‘C”
channel using Pac solvent cement
adhesive and 10mm(5mmX2) thick,
20mm wide cross Pac sheet to be fitted
as gap insert for top and bottom rail etc.
complete as per direction of Engineer –
in-Charge, manufacture specification
and drawing.
MOULDED PVC DOOR - WOOD FREE
Providing and fixing 30mm thick Brand
factory made Moulded door shutter-
753 MAT-01336 BMT-N.07 wood free consisting of frame made out 1 sqm 2699
of MS. tubes 19gauge thickness and
size of 25mmX25mm for stiles, top and
bottom rails. MS. Frame shall have a

109
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
coat of steel primers. The inner panel
shall consist of 25mm thick High density
EPS conforming to IS 4671-1984
bounded with 2mm thick termite proof,
water proof and fire resistant moulded
Pac sheet with 2,4,6 raised panel design
in different plain and / or prelam colours
after routing to the moulded design on
one side and 2mm plain and / or prelam
Pac sheet on other side of the EPS.
The edge of panel to be sealed with
lipping of 10mm wide PVC sheet bottom
(made by sticking 2 rigid foam sheet of
5mm thickness using Pac solvent
cement) and stiles sides 25mm(5mmX5)
thick and 30mm width Pac sheet fitted
along Ms. Tube for lock provision for
lock height 5mm thick Pac sheet of size
150mmX100mm fixed with upper and
lower face of inner side of EPS Panel
etc. Complete as per direction of
Engineer – in-Charge, manufacture
specification and drawing
Providing and fixing 30mm thick BRAND
FACTORY MADE WIRE MESH SOLID
PVC DOOR SHUTTER consisting of
frame made out of M.S. tubes of 19
gauge thickness and size of
19mmX19mm for stiles and 15mm for
top, lock & bottom rails. MS. Frame shall
have a coat of steel primers of approved
make and manufacture. 19mmX19mm
M.S. square tubes shall be covered with
5mm thick heat moulded PVC ‘C’
channel of size 30mm thickness, 90mm 2370
width out of which 75mm shall be flat
754 MAT-01337 BMT-N.08 and 15mm shall be flat and 15mm shall 1 sqm
be bent in 900 on the inner side to from
top and bottom rail land 130mm wide
PVC sheet out of which 100mm shall
be flat and 154mm shall be bent in 900
on both side to from lock rail,
10mm(5mmX2) thick, 20mm wide cross
PVC sheet as gap insert for top rail &
bottom rail. Panel will be of G.I.wire
mesh of 24gauge to be fitted in by ’C’
channel of size 35mm X10mm on the
either side in the stiles. The inner side
‘C’ channel is fixed by 19mmX19mm
MS. Tube on both sides with screws.
The wire mesh in top bottom & lock rail
is sealed with15mm X 15mm tube with
G.I.wire 10mm(5mmX2) thick PVC strip
of 25mm width is to be stuck& nails on

110
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
both side of G.I. wire mesh interior at
the top, bottom & lock rail. An additional
5mm thick PVC srip of 20mm width is to
be stuck on the interior side of the ‘C’
channel using PVC solvent cement
adhesive etc. complete as per direction
of Engineer-in-charge, manufacturer’s
specification & drawings
Providing and fixing frame made from
1.2 mm powder coated cold rolled steel
profiles of overall section size of 60 mm
x 45 mm with 21 mm rivet for shutter
with necessary stiffeners hinges and
screws. BOARD (IS 14862) shutter with
all-round style “U” lipping of size 15 x 18
755 MAT-01394 BMT-N.65 1
x 15 mm made from 0.8 mm thick CRCA
Sqm
powder coated steel profile with 16 mm 2091
thick V-board with necessary screws
fixed at every 1’-0” interval 250 mm long
aldrops 2 nos. M.S. nickel coated 250
mm long 1 no. M.S. Tower Bolts
Including cost and conveyance. One
coat of primer, 2 coats of luppum and 2
coats of synthetic enamel paint as per
approved colour, labour charges etc.
Providing and fixing of door frame
made from cold roll formed sections
made of galvanized (Base steel as per
IS277 with zinc of 120 Gms/sqm) colour
coated steel sections with total coated
thickness of 1mm, primer coated with
epoxy primer coat of 5-7 microns thick,
finish paint with polyester paint of 12-16
microns. The Section for door frame is
to be filled with polyurethane (P.U) form
of 40kg/m3. Overall size of frame
section should be of 50mm x 50mm.
756 MAT-01357 BMT-N.28 With necessary corner brackets, 1
stiffeners, hinges, and screws. Cement Sqm
Bonded particle board shutter “Single 4676
Leaf” with all round styles “U” section of
size 12m x 18m x 12mm made from 0.6
mm thick galvanized, colour coated cold
rolled steel profiles with 16mm thick
Cement Bonded particle Board with
necessary screws fixed at every 1’-0”
(304.8mm) intervals. The cost inclusive
of MS nickel coated Aldrop of size
250mm long 2nos. 200mm long tower
bolt 1no., 125mm handles 2nos., cost
and conveyance of all materials at site
and applying one coat primer , one coat
of luppum and two coats of synthetic
enamel paint as per approved design

111
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
for finished item of work
DOORS FRAMES (COLOUR COATED
STEEL SECTIONS) & SHUTTER
USING CEMENT BONDED PARTICLE
BOARD AS PER IS 14276:
757 ITEM DELETED
TO 760 BMT-N.40 to
BMT-N.43

Supplying and fixing door shutter, with

shutter frame and infill panel made
from PVC material conforming to IS:
10151-1982, the shutter frame made out
of PVC extruded sections having overall
dimension of 47 mm x 33 mm with wall
thickness of 1.2mm + 0.3mm with usual
process variation, the shutter frame with
tapered shape to provide better grip to
the infill panel end to drain out the water
761 MAT-01373 BMT-N.44 The Infill panel is made out of PVC 1
Sections having Overall Dimensions of Sqm
200 mm x 20 mm with wall thickness of 1112
1mm + 0.2mm, the shutter frames mitre
cut and joined at the corner, by
providing Polymeric “ L” type corners to
take hardware & fixtures fixed with 10-
20mm counter sunk fully threaded
parallel shank steel screws, all the
hardware locations reinforced with
special polymeric bars as per drawings,
stickers showing locations of different
hardware pasted on the shutter, the infill
panels joined by tongue and groove
method.
Providing & Fixing of Scientific Doors
with metal door frames and door
shutters made of galvanize steel (base
steel as per IS 513 of 0.58 mm thick D
quality, galvanized as per IS 277 with
Zinc of 120 GSM)coated with Zinc
Phosphate Primer to receive any paint
on site or finished with Thermosetting
762 MAT-01374 BMT-N.45 Polyurethane paint of Aliphatic Grade 1
providing high levels of scratch Sqm
10530
resistance and durability/Epoxy
polyester powder for powder coating
paint thickness 50-60 microns (Dry film
thickness) outer frame section of 100 x
58 mm x 1.2 mm thick, shutter section of
0.80 mm thick galvanized steel sheet
pressed (roll formed) for 46mm thick
fully flush, double skin door shell seam
joints at stile edges, in-fill of honeycomb
kraft paper used to give the required

112
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
rigidity and effective acoustic insulation
with 6” Tower bolt – 1 No., 6” D handles
– 2 Nos., 10” Aldrop – 1 No., Butt
Hinges – 3 Nos, Mortise Lock of
approved quality – 1 No, frames fixed to
the concrete/masonry wall by means of
self expanding screws complete for
finished item of work for Single leaf Door
Providing & Fixing of Scientific Doors
with metal door frames and door
shutters made of galvanize steel (base
steel as per IS 513 of 0.58 mm thick D
quality, galvanized as per IS 277 with
Zinc of 120 GSM). coated with Zinc
Phosphate Primer to receive any paint
on site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade
providing high levels of scratch
resistance and durability/Epoxy
polyester powder for powder coating
764 MAT-01375 BMT-N.46 paint thickness 50-60 microns (Dry film 1 11000
thickness) outer frame section of 100 x Sqm
58 mm x 1.2 mm thick, shutter section of
0.80 mm thick galvanized steel sheet
pressed (roll formed) for 46mm thick
fully flush, double skin door shell seam
joints at stile edges, in-fill of honeycomb
kraft paper used to give the required
rigidity and effective acoustic insulation
with 6” Tower bolt – 2 Nos., 6” D
handles – 2 Nos., 10” Aldrop – 1 No.,
Butt Hinges – 6 Nos, Mortise Lock of
approved quality – 1 No, frames fixed to
the concrete/masonry wall by means of
self expanding screws complete for
finished item of work for Double leaf
Door
Providing & fixing 30 mm thick solid
panel PVC door shutter consisting of
frame made out of 19 guage M.S tube
of 19 x 19 mm for stiles, top & bottom
rail, with a coat of primer of approved
make. M.S. Frame covered with 5 mm
thick heat moulded PVC “C” channel of
765 MAT-01380 BMT-N.51 1 3275
size of 30 x 50 mm forming stiles, 5
Sqm
mm thick 75 mm wide PVC sheet for
top, lock & bottom rail on either side 20
mm wide cross PVC sheet as gap insert
for top & bottom rail, panelling of
10mm(+/-)( 5mm+5mm)” thick PVC
sheet fitted in the M.S. frame welded
/sealed to the stiles, on either side
joined together with solvent cement
adhesive etc., additional 5 mm thick

113
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
PVC strip of 20 mm width stuck on the
interior side of the C channel using
solvent cement, complete as per direction
of Engineer–in–charge, manufacturers
specification.
Supply of factory made of Double Skin Pass
Galvanized Powder Coated Single Rebate
Doorframe and single shutter/Double shutter
for General applications made of Double
Skin
Pass Galvanized Sheet confirming to Base
Steel as per IS 513 of ‘D’ Quality Galvanized
as
per IS 277 with Zinc coating of 120 GSM ,
Pure polyester Powder Coated Paint of 60-
65Microns(DFT)Thick.
Frame:
Single rebate Door Frame of size 100 mm X
78 mm with 1.00 mm thick Double Skin Pass
Galvanized sheet Roll formed into Closed
Box Profile with Suitable lock-seam joints
and
proper stitching procedures having a Design
Architrave of 20 mm width and 1
NEW ITEM accommodate a Sqm 9900
46 mm thick Door shutter and the sections
cut to length , Miter joined with corner
bracket and
EPDM Gaskets using self-expanding
Screws . The Door frames are filled with an
infill material
of Polyurethane foam (PUF) of Density 32 to
36 kg / m3.
Groove in Door Frame shall be provided to
hold EPDM Gasket so that the Door shutters
shall
rest on the EPDM Gasket when the Door
shutters are closed. EPDM gasket makes
the Door
weather resistant.
The door frame shall be provided with hinge
jamb, lock jamb, head jamb and with
Suitable
Anchors per frame.
Door frame Stiffeners for Hinge:
Stiffener of Skin pass Galvanized Sheet of 3
mm thick shall be welded to the pressed
angle
from inner side of the Door Frame and
shutter using projection welding / Fixing with
Screws
from Gasket groove. Stiffener plate shall be
threaded to the required size of machine
screw
(M6 × 20 CSK) conforming to IS 1365,
2.2/1.8 mm joggling depth on a 3 mm hinge
plate.
Door Frame Stiffener of pressed ‘C’
114
channels and Skin pass Galvanized steel
Sheet of
thickness 1.60 mm and of sufficient width
and length or 1.2 mm thick (Skin pass
Galvanized
steel Sheet) sheet of required width and
height as per the iron mongery, shall be
provided
inside the Door frame at suitable places to
fix fittings and fixtures, such as aldrop, tower
bolt,
sliding bolt, door stopper, door closer, etc,
(Stiffeners only)
Shutter :
The Single Door Shutter shall be made of
1.00 mm thick Double Skin pass Galvanized
Sheet formed and shall be of 46 mm thick
fully flush, double skin door shell with Lock
Seam
joints at stile edges, top and bottom edge
skins bent inwards in U shape filled with in-
fill of
Honeycomb Kraft Paper and coated with
Pure polyester powder coating of thickness
60 – 65
microns, providing high levels of scratch
resistance and durability, as per IS 4351
(2003),and
IS 13871.
Honey comb kraft paper :
In-fill of Door shutter shall be with honey
comb kraft paper of 16 mm cell size, 140
gsm, Core
thickness of 44.5 mm, Humidity of 6 to 10
percent and compression strength 150/200
kpa at
23℃ and 130 ℃ respectively. The product
shall conform to EMPHA and ISO standards.
The
skin panels of the door and Honeycomb
Kraft Paper shall be bonded with GLUE. The
glue
shall comply with A2/IMO standards.
Door shutter Stiffeners :
Stiffener of pressed ‘C’ channels and Skin
pass Galvanized steel Sheet of thickness
1.60 mm
of sufficient width and length or 1.2 mm thick
(Skin pass Galvanized steel Sheet)
rectangular
box cross sectional stiffener between the
two skins of the door shutter (to the full inner
thickness of the door shutter) of required
width and height as per the iron mongery,
shall be
provided inside the shutter at suitable places
to fix fittings and fixtures, such as aldrop,
tower
bolt, sliding bolt, door stopper, door closer,
etc,. (stiffners only)
The slots and holes shall be pierced into the
Door Frame and shutter and necessary
fixing
arrangements shall be provided.
Hardware and Accessories :
115
 10” ‘D’Handle – 1 Pair.,
Ball Bearing Butt Hinges – 3 No’s,
Mortise Lock / 10” Aldrop – 1 No.,
6” Tower Bolt – 1 No.,
All Hardware and Screws Should be
Stainless Steel 304 Grade.
The unit cost includes - loading, cost of
conveyance, unloading

Supply of factory made of Double Skin Pass

Galvanized Powder Coated Single
Rebate Door frame and Single
shutter/Double shutter for Scientific
applications
made of Double Skin Pass Galvanized
Sheet confirming to Base Steel as per IS
513 of ‘D’ Quality Galvanized as per IS 277
with Zinc coating of 120 GSM , Pure
polyester Powder Coated Paint of 60-65
Microns (DFT) Thick.
Frame :
Single rebate Door Frame of size 100 mm X
78 mm with 1.00 mm thick Double Skin Pass
Galvanized sheet Roll formed into Closed
Box Profile with Suitable lock-seam joints
and
proper stitching procedures having a Design
Architrave of 20 mm width and
accommodate a
46 mm thick Door shutter and the sections
cut to length , Miter joined with corner
bracket and
EPDM Gaskets using self-expanding 1
Screws . The Door frames are filled with an Sqm 9900
NEW ITEM infill material
of Polyurethane foam (PUF) of Density 32 to
36 kg / m3.
Groove in Door Frame shall be provided to
hold EPDM Gasket so that the Door shutters
shall
rest on the EPDM Gasket when the Door
shutters are closed. EPDM gasket makes
the Door
weather resistant.
The door frame shall be provided with hinge
jamb, lock jamb, head jamb and with
SuitableAnchors per frame.
.
Door frame Stiffeners for Hinge:
Stiffener of Skin pass Galvanized Sheet of 3
mm thick shall be welded to the pressed
angle
from inner side of the Door Frame and
shutter using projection welding / Fixing with
Screws
from Gasket groove. Stiffener plate shall be
threaded to the required size of machine
screw
(M6 × 20 CSK) conforming to IS 1365,
2.2/1.8 mm joggling depth on a 3 mm hinge
plate.
Door Frame Stiffener of pressed ‘C’
channels and Skin pass Galvanized steel
Sheet of

116
thickness 1.60 mm and of sufficient width
and length or 1.2 mm thick (Skin pass
Galvanized
steel Sheet) sheet of required width and
height as per the iron mongery, shall be
provided
inside the Door frame at suitable places to
fix fittings and fixtures, such as aldrop, tower
bolt,
sliding bolt, door stopper, door closer, etc,
(Stiffeners only)
Shutter :
The Single Door Shutter shall be made of
1.00 mm thick Double Skin pass Galvanized
Sheet formed and shall be of 46 mm thick
fully flush, double skin door shell with Lock
Seam
joints at stile edges, top and bottom edge
skins bent inwards in U shape filled with in-
fill of
Honeycomb Kraft Paper and coated with
Pure polyester powder coating of thickness
60 – 65
microns, providing high levels of scratch
resistance and durability, as per IS 4351
(2003), and
IS 13871.
Honey comb kraft paper :
In-fill of Door shutter shall be with honey
comb kraft paper of 16 mm cell size, 140
gsm, Core
thickness of 44.5 mm, Humidity of 6 to 10
percent and compression strength 150/200
kpa at
23℃ and 130 ℃ respectively. The product
shall conform to EMPHA and ISO standards.
The
skin panels of the door and Honeycomb
Kraft Paper shall be bonded with GLUE. The
glue
shall comply with A2/IMO standards.
Door shutter Stiffeners :
Stiffener of pressed ‘C’ channels and Skin
pass Galvanized steel Sheet of thickness
1.60 mm
of sufficient width and length or 1.2 mm thick
(Skin pass Galvanized steel Sheet)
rectangular
box cross sectional stiffener between the
two skins of the door shutter (to the full inner
thickness of the door shutter) of required
width and height as per the iron mongery,
shall be
provided inside the shutter at suitable places
to fix fittings and fixtures, such as aldrop,
tower
bolt, sliding bolt, door stopper, door closer,
etc,. (stiffners only)
The slots and holes shall be pierced into the
Door Frame and shutter and necessary
fixing
arrangements shall be provided.
Hardware and Accessories :
10” ‘D’Handle – 1 Pair.,
Ball Bearing Butt Hinges – 3 No’s,
117
 Mortise Lock / 10” Aldrop – 1 No.,
6” Tower Bolt – 1 No.,
All Hardware and Screws Should be
Stainless Steel 304 Grade
Vision Glass : with vision glass on door
shutter with Double Glazed 6mm thick clear
float glass or clear toughned glass in
standard sizes 200mmX300mm/
450mmX750mm/ 450mmX450mm /
350mmX 750mm or circular size of 450mm
Dia
The unit cost includes - loading, cost of
conveyance, unloading

Supply of factory made of Double Skin Pass

Galvanized Powder Coated Single
Rebate Door frame for general applications
made of Double Skin Pass Galvanized
Sheet confirming to Base Steel as per IS
513 of ‘D’ Quality Galvanized as per IS
277 with Zinc coating of 120 GSM , Pure
polyester Powder Coated Paint of 60-65
Microns (DFT) Thick.
Frame :
Single rebate Door Frame of size 100 mm X
78 mm with 1.00 mm thick Double Skin Pass
Galvanized sheet Roll formed into Closed
Box Profile with Suitable lock-seam joints
and
proper stitching procedures having a Design
Architrave of 20 mm width and
accommodate a
46 mm thick Door shutter and the sections
cut to length , Miter joined with corner
bracket and
EPDM Gaskets using self-expanding
Screws . The Door frames are filled with an
infill material
of Polyurethane foam (PUF) of Density 32 to
36 kg / m3.
Groove in Door Frame shall be provided to
hold EPDM Gasket so that the Door shutters
shall 1RM
rest on the EPDM Gasket when the Door 962
NEW ITEM shutters are closed. EPDM gasket makes
the Door
weather resistant.
The door frame shall be provided with hinge
jamb, lock jamb, head jamb and with
Suitable
Anchors per frame.
Door frame Stiffeners for Hinge:
Stiffener of Skin pass Galvanized Sheet of 3
mm thick shall be welded to the pressed
angle
from inner side of the Door Frame and
shutter using projection welding / Fixing with
Screws
from Gasket groove. Stiffener plate shall be
threaded to the required size of machine
screw
(M6 × 20 CSK) conforming to IS 1365,
2.2/1.8 mm joggling depth on a 3 mm hinge
plate.

118
 Stiffeners for fittings and fixtures:
Stiffener of pressed ‘C’ channels and Skin
pass Galvanized steel Sheet of thickness
1.60 mm
and of sufficient width and length or 1.2 mm
thick (Skin pass Galvanized steel Sheet)
sheet of
required width and height as per the iron
mongery, shall be provided inside the Door
frame at
suitable places to fix fittings and fixtures,
such as aldrop, tower bolt, sliding bolt, door
stopper,
door closer, etc, (Stiffeners only). The slots
and holes shall be pierced into the door
Frame and necessary fixing arrangements
shall be provided.
Hardware and Accessories:
Ball Bearing But Hinges – 3 No’s,
All Hardware and Screws Should be
Stainless Steel 304 Grade.
The unit cost includes - loading, cost of
conveyance, unloading

Supply of Factory made of Single Rebate

Stainless Steel Door frame and Single
shutter/ Double Shutter for Scientific
applications made of Stainless Steel
Grade 304 of Hairline Finish
Frame :
Single rebate Door Frame of size 100 mm
X 78 mm with 1 mm thick Stainless Steel
Grade
304 sheet Roll formed into Closed Box
Profile with Suitable lock-seam joints and
proper
stitching procedures having a Design
Architrave of 20 mm width and
accommodate a 46 mm
thick Door shutter and the sections cut to
length , Mitre joined with corner bracket
NEW ITEM and EPDM
Gaskets using self-expanding Screws .
The Door frames are filled with an infill
material of
Polyurethane foam (PUF) of Density 32 to 1
36 kg / m3. 16976
Groove in Door Frame shall be provided Sqm
to hold EPDM Gasket so that the Door
shutters shall
rest on the EPDM Gasket when the Door
shutters are closed. EPDM gasket makes
the Door
weather resistant.
The door frame shall be provided with
hinge jamb, lock jamb, head jamb and
with Suitable
Anchors per frame.
.
119
Door frame Stiffeners for Hinge:
Stiffener of Stainless Steel Grade 304
sheet of 3 mm thick shall be welded to the
pressed
angle from inner side of the Door Frame
and shutter using projection welding /
Fixing withScrews from Gasket groove.
Stiffener plate shall be threaded to the
required size of machine
screw (M6 × 20 CSK) conforming to IS
1365, 2.2/1.8 mm joggling depth on a 3
mm hinge
plate.
Door Frame Stiffener of pressed ‘C’
channels and Stainless Steel Grade 304
sheet of
thickness 1.60 mm and of sufficient width
and length or 1.2 mm thick (Skin pass
Galvanized
steel Sheet) sheet of required width and
height as per the iron mongery, shall be
provided
inside the Door frame at suitable places to
fix fittings and fixtures, such as aldrop,
tower bolt,
sliding bolt, door stopper, door closer, etc,
(Stiffeners only)
Shutter :
The Single Door Shutter shall be made of
1.00 mm thick Stainless Steel Grade 304
Sheet
formed and shall be of 46 mm thick fully
flush, double skin door shell with Lock
Seam joints at
stile edges, filled with in-fill of Honeycomb
Kraft Paper.
Honey comb kraft paper :
In-fill of Door shutter shall be with honey
comb kraft paper of 16 mm cell size, 140
gsm, Core
thickness of 44.5 mm, Humidity of 6 to 10
percent and compression strength
150/200 kpa at
23℃ and 130 ℃ respectively. The product
shall conform to EMPHA and ISO
standards. The
skin panels of the door and Honeycomb
Kraft Paper shall be bonded with GLUE.
The glue
shall comply with A2/IMO standards.
Door shutter Stiffeners :
Stiffener of pressed ‘C’ channels and Skin
pass Stainless Steel Grade 304 Sheet of
thickness
1.60 mm of sufficient width and length or
1.2 mm thick rectangular box cross
sectional
stiffener between the two skins of the door
shutter (to the full inner thickness of the

120
 door
shutter) of required width and height as
per the iron mongery, shall be provided
inside the
shutter at suitable places to fix fittings and
fixtures, such as aldrop, tower bolt, sliding
bolt,
door stopper, door closer, etc,. (stiffners
only)
The slots and holes shall be pierced into
the Door Frame and shutter and
necessary fixing
arrangements shall be provided.
Hardware and Accessories :
10” ‘D’Handle – 1 Pair.,
Ball Bearing Butt Hinges – 3 No’s,
Mortise Lock / 10” Aldrop – 1 No.,
6” Tower Bolt – 1 No.,
All Hardware and Screws Should be
Stainless Steel 304 Grade
Vision Glass : with vision glass on door
shutter with Double Glazed 6mm thick
clear
float glass or clear toughned glass in
standard sizes 200mmX300mm/
450mmX750mm/ 450mmX450mm /
350mmX 750mm or circular size of
450mm Dia
The unit cost includes - loading, cost of
conveyance, unloading
Supplying & fixing SINGLE PANEL 30
mm thick PVC DOOR, door shutters
with shutter frame and Infill panel made
from PVC material, the shutter frame
made out of PVC extruded sections
having overall dimensions of 6 0mm x 30
mm with wall thickness of 1.3 mm ± 0.3
766 MAT-01382 BMT-N.53 mm, with the Infill panel made out of multi 1
chambered seamless hollow PVC Sqm
2791
extruded panel having overall dimensions
of 610 mm x 20 mm having wall thickness
1 mm ± 0.2 mm with the shutter frame
meter cut and joined at corners and all
the hardware locations reinforced with
special polymeric bars as per drawing
including providing special PVC braket on
hinge side, etc complete

121
 Supply & Fixing of Powder Coated Mild
Steel doors, frames & shutters made of
Skin pass galvanized Iron sheet
conforming to Base Steel as per IS 513
“D” Quality, Galvanized as per IS 277 with
Hot Zinc Coating of 120 grams / Sq.Mtr
with powder coating of thickness 60-65
Microns, frame with 1.2mm thick Skin
pass Galvanized Iron sheet formed to
single rebate profile of ize 100 mm X 58
mm and filled with in-fill Polyurethane
foam, the Door Shutters are with 0.80 mm
thick Skin pass Galvanized Iron Sheet
767 MAT-01384 BMT-N.55 1
formed to provide a 46 mm thick fully
Sqm
flush, double skin door shell with Lock
Seam joints at stile edges, fitted with in-fill
of Honeycomb Kraft Paper and coated
with polyester powders of Pure polyester/
epoxy polyester or polyurethane powder 9644
for powder coating of thickness 60 – 65
microns and are coated with Zinc
Phosphate Primer to receive any paint on
site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade
providing high levels of scratch resistance
and durability, the Shutter provided with 6
MM clear float vision glass in Circular,
Square or Rectangular shapes, Stainless
Steel Ball Bearing Butt Hinges 3 mm thick
fixed flush to the frame and shutter

122
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
(Profile 102x76x3mm thick).Mortise
Sash Lock with Lever Handles, Mortise
Dead Bolt, etc for industrial, commercial,
residential, cleanroom applications
Supply & Fixing of Stainless steel
doors, frames & shutters made of
stainless steel grade 304 of hairline
finish, frame with 1.2mm thick formed to
single rebate profile of ize 100 mm X 58
mm and filled with in-fill Polyurethane
foam, the Door Shutters are with 0.80
mm thick Stainless steel Sheet formed
to provide a 46 mm thick fully flush,
double skin door shell with Lock Seam
joints at stile edges, fitted with in-fill of 16611
Honeycomb Kraft Paper, the Shutter
provided with 6 MM clear float vision
glass in Circular, Square or Rectangular 1
768 MAT-01385 BMT-N.56 shapes, Stainless Steel Ball Bearing Sqm
Butt Hinges 3 mm thick fixed flush to the
frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever
Handles, Mortise Dead Bolt, etc for
industrial, commercial, residential,
cleanroom applications.
Supply & Fixing of Powder Coated Fire
Rated doors, frames & shutters made
of Skin pass galvanized Iron sheet
conforming to Base Steel as per IS 513
“D” Quality, Galvanized as per IS 277
with Hot Zinc Coating of 120 grams /
Sq.Mtr with powder coating of thickness
60-65 Microns, frame with 1.2mm thick
Skin pass Galvanized Iron sheet formed
to double rebate profile of ize 143 mm X
58 mm with maximum bending radius of
1.4 mm and filled with in-fill
Polyurethane foam, the Door Shutters
are with 0.80 mm thick Skin pass
Galvanized Iron Sheet formed to provide 13900
a 46 mm thick fully flush, double skin
door shell with Lock Seam joints at stile
edges, fitted with in-fill of Honeycomb
Kraft Paper and coated with polyester
powders of Pure polyester/ epoxy 1
769 MAT-01386 BMT-N.57 polyester or polyurethane powder for Sqm
powder coating of thickness 60 – 65
microns and are coated with Zinc
Phosphate Primer to receive any paint
on site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade
providing high levels of scratch
resistance and durability, the Shutter
provided with 6 MM clear float vision

123
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
glass in Circular, Square or Rectangular
shapes, Stainless Steel Ball Bearing
Butt Hinges 3 mm thick fixed flush to the
frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever
Handles, Mortise Dead Bolt, etc for 120
minutes Fire Rated door conforming to
IS:3614 (Part2) 1992
Supply & Fixing of Powder Coated Fire
Rated doors, frames & shutters made
of Skin pass galvanized Iron sheet
conforming to Base Steel as per IS 513
“D” Quality, Galvanized as per IS 277
with Hot Zinc Coating of 120 grams /
Sq.Mtr with powder coating of thickness
60-65 Microns, frame with 1.2mm thick
Skin pass Galvanized Iron sheet formed
to double rebate profile of ize 143 mm X
58 mm with maximum bending radius of
1.4 mm and filled with in-fill
Polyurethane foam, the Door Shutters
are with 0.80 mm thick Skin pass
Galvanized Iron Sheet formed to provide
a 46 mm thick fully flush, double skin
door shell with Lock Seam joints at stile
edges, fitted with in-fill of Honeycomb
Kraft Paper and coated with polyester
powders of Pure polyester/ epoxy
polyester or polyurethane powder for
powder coating of thickness 60 – 65
microns and are coated with Zinc
Phosphate Primer to receive any paint
on site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade 1
770 MAT-01387 BMT-N.58 providing high levels of scratch Sqm 13148
resistance and durability, the Shutter
provided with 6 MM clear float vision
glass in Circular, Square or Rectangular
shapes, Stainless Steel Ball Bearing
Butt Hinges 3 mm thick fixed flush to the
frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever
Handles, Mortise Dead Bolt, etc for 60
minutes Fire Rated door conforming to
IS:3614 (Part2) 1992
Supply & Fixing of Stainless steel Fire
Rated doors, frames & shutters made
of Stainless steel of 304 grade hairline
21500
finish, frame with 1.2mm thick Stainless
steel of 304 grade hairline finish sheet
formed to double rebate profile of ize 1
771 MAT-01388 BMT-N.59 143 mm X 58 mm with maximum Sqm
bending radius of 1.4 mm and filled with
in-fill Polyurethane foam, the Door

124
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
Shutters are with 0.80 mm thick
Stainless steel of 304 grade hairline
finish Sheet formed to provide a 46 mm
thick fully flush, double skin door shell
with Lock Seam joints at stile edges,
fitted with in-fill of Honeycomb Kraft
Paper and coated with polyester
powders of Pure polyester/ epoxy
polyester or polyurethane powder for
powder coating of thickness 60 – 65
microns and are coated with Zinc
Phosphate Primer to receive any paint
on site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade
providing high levels of scratch
resistance and durability, the Shutter
provided with 6 MM clear float vision
glass in Circular, Square or Rectangular
shapes, Stainless Steel Ball Bearing
Butt Hinges 3 mm thick fixed flush to the
frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever
Handles, Mortise Dead Bolt, etc for 120
minutes Fire Rated door conforming to
IS:3614 (Part2) 1992
Supply & Fixing of Stainless steel Fire
Rated doors, frames & shutters made
of Stainless steel of 304 grade hairline
finish, frame with 1.2mm thick Stainless
steel of 304 grade hairline finish sheet
formed to double rebate profile of ize
143 mm X 58 mm with maximum
bending radius of 1.4 mm and filled with
in-fill Polyurethane foam, the Door
Shutters are with 0.80 mm thick
Stainless steel of 304 grade hairline
finish Sheet formed to provide a 46 mm
MAT-01389 BMT-N.60 thick fully flush, double skin door shell 1 19261
772
with Lock Seam joints at stile edges, Sqm
fitted with in-fill of Honeycomb Kraft
Paper and coated with polyester
powders of Pure polyester/ epoxy
polyester or polyurethane powder for
powder coating of thickness 60 – 65
microns and are coated with Zinc
Phosphate Primer to receive any paint
on site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade
providing high levels of scratch
resistance and durability, the Shutter
provided with 6 MM clear float vision
glass in Circular, Square or Rectangular
shapes, Stainless Steel Ball Bearing
Butt Hinges 3 mm thick fixed flush to the

125
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever
Handles, Mortise Dead Bolt, etc for 60
minutes Fire Rated door conforming to
IS:3614 (Part2) 1992
Supply & Fixing of Lead Lined Clean
room doors frames and shutters
made of Skin pass galvanized Iron
sheet (Conform to Base Steel as per IS
513 “D” Quality, Galvanized as per IS
277 with Hot Zinc Coating of 120 grams
/ Sq.Mtr).with powder coating of
thickness 60-65 Microns, frame of
1.60mm thick galvanized steel sheet
(Conform to IS 277) formed to
Single/double rebate profile of size
100mm X 58mm/ 143x58mm, door
frames with a single / multi Layer of
Lead sheet varying thickness from 3mm
/1mm to 2mm depends on radiation
level, the shutter with 1.2 mm thick
Galvanized Steel Sheet (Conform to IS
277) formed to provide a 46mm thick
fully flush, double skin door shell with
773
MAT-01390 BMT-N.61 Lock Seam joints at stile edges with a 1
16274
single / multi Layer of Lead sheet Sqm
varying thickness from 3mm /1mm to
2mm depends on radiation level, the
lead sheets extend the full width and
height of the door, Lead thickness is
equal to the shielding in the adjacent
wall, the door frames and door shutters
are coated with polyester powders of
Pure polyester/ epoxy polyester or
polyurethane powder for powder coating
of thickness 60 – 65 microns, coated
with Zinc Phosphate Primer to receive
any paint on site or finished with
Thermosetting Polyurethane paint of
Aliphatic Grade providing high levels of
scratch resistance and durability,
hardware with Stainless Steel Ball
Bearing Butt Hinges 3 mm thick fixed
flush to the frame and shutter etc
complete for finished item
Supply & Fixing of Lead Lined
Stainless steel Clean room door
frames and shutters made of
Stainless steel grade of 304 hairline 1
MAT-01391 BMT-N.62
774 finish, frame with 1.60mm (16SWG) Sqm 24926
thick hairline finish Stainless steel grade
of 304 formed to Single/double rebate
profile of size 100 mm x 58mm/ 143 x
58 mm, door frames with a single / multi

126
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
Layer of Lead sheet varying thickness
from 3mm /1mm to 2mm depends on
radiation level, the shutter with 1.2 mm
thick hairline finish Stainless steel grade
of 304 formed to provide a 46mm thick
fully flush, double skin door shell with
Lock Seam joints at stile edges with a
single / multi Layer of Lead sheet
varying thickness from 3mm /1mm to
2mm depends on radiation level. The
lead sheets extend the full width and
height of the door. Lead thickness is to
be equal to the shielding in the adjacent
wall. Hardware can be provided with
Stainless Steel Ball Bearing Butt Hinges
3 mm thick fixed flush to the frame and
shutter etc complete for fisnihed item of
work
MAT-01395 BMT-N.66 ITEM DELETED
775
A) Specification for Foamed PVC Door
Frame & ABS Shutters: Providing of
Factory made prelaminated FPVC
(Foamed Polyvinyl Chloride) Door frame
of the size 105x40mm with a wall
thickness of 10mm made out of
extruded rigid FPVC profile mitre joined
with 6 Nos. of 50mm long screw. The
door frame shall be fixed to the wall by
using 80mm long screws through the
frame with the help of PVC fasteners of
3 no's to be provided for each vertical
member,GI stiffners of ("U" chanel of
size 29x9x1mm, 150mm long) -3 no's at
hinge point,Frame reinforcement of("U"
MAT-01396 BMT-N.67 GI chanel of size 46x22x.06mm),Bottom Each 15250
776
tie rod of ("U" GI chanel size of
15x15x1mm) etc. complete as per
manufacturers specification for finished
item of work. Maximum door frame
size : 980 x 2070 . B)
Providing of 35mm thick Facotry made
Prelaminated ABS (Acrolynitrile
Butadyne Styrene) Door shutter
moulded in different designs, consisting
of all round Frame made out of water
proof solid foam PVC bar of size
20x32mm, reinforced by 32x 32mm - 2
nos. for vertical made out of LVL
(Laminated Veneer Lumber), core
material of 32 mm thick high density
craft paper honey comb board,
sandwiched on both sides with
prelaminated ABS sheet thickness of
1.5mm . PVC edge banding of size

127
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
0.45mm on the vertical sides. Hardware
made out of steel coated butterfly
hinges - 3 Nos. for each shutter and ISI
make S.S round lock completes for
finished item of work. Maximum shutter
size of : 910 x 2030 mm
Supply and fixing of Bath room / Toilet
door shutter with 16mm laminated (IS
14276) door shutter with all-round ‘U’
lipping of PPS section of size 12mm X
18mmX 12mmX0.6mm thickness with a
hardware of 12mm dia X200mm long
aluminum aldrop – 2 nos( ISI make)2 No 2740
of 125mm long handles(ISI make) and
also 3 no Of IS304 grade Patee Hinges 1
777 MAT-01398 BMT-N.69 3mmX12mmX180mm long with pole Sqm
receiver of 10mm dia pole X40mm long
welded on 2mm X40mm(ss304) plates
works as receiver for RT patte hinges.
The price inclusive of all material at site
Supply and fixing of toilet door shutter
with frame made of M.S. door frame of
5mmX48mmX48mm (L angel) as all-
round frame the frame is coated with
one coat of red oxide and two coats of
enamel of approved color. For shutter
and the shutter is made with 16mm
laminatedshutter with all-round ‘U’
Lipping of PPS section of
12mmX18mmX12mmX0.60mm, along
hardware of 200m long and 12mm dia 4260
aluminum aldrop( ISI make)2 Nos, 2Nos
of 125m m handle, 3 Nos of RT patte
hinges IS 304gr SS 1
MAT-01399 BMT-N.70 2mmX12mmX180mm long with a pole Sqm
778
receiver of 10mmDia X 40mm by
welded on 3mmX40mm SS 304, plate it
works as receiver for RT Patee hinges
it is welded to M.S. angle . M.S. angle
will be fixed to wall of self expandable
screws and caps.
Door shutter with shutter frame and Infill
panel made from PVC material
conforming to IS: 10151:1982. The
shutter frame is made out of PVC
extruded sections having overall
dimensions of 100mm X 30mm, with two 1112
self extruded grooves at 40mm & 50mm
on front surface. The Infill panel is made
779 MAT-01402 BMT-N.73 out of multi chambered seamless hollow Sqm.
PVC extruded panel having overall
dimensions of 610 mm X 20 mm. The
shutter frame shall be meter cut and

128
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
joined at corners by means of plastic
brackets. Stickers showing locations of
different hardware will be pasted on the
shutter. ALL Dimensions are in MM.
The shutter frame made out of PVC
extruede section having overall
dimensions of 59mm x 24mm with wall
thickness of 1.0mm +/-0.3mm with usual
process variation corresponding to the
Sintex Code No.DWUF-302. The
shutter frame is given tampered shape
to provide better grip to the infill panel
and to drain out the water.The infill
panel is made out of seamless one
piece multi chambered PVC extruded
section having overall dimension of 2142
610mm x 20mm with wall thickness of
1mm +/-0.2mm with usual process
variation corresponding to the Sintex
code No.SPUF-128. The shutter frame
shall be mitre cut and joined at the 1
MAT-01403 BMT-N.74 Sqm
corner polymeric “L’ Type corners shall
be provided at the corners to take up
hardwares & fixtures and shall be fixed
780 with 19 x 8mm counter sunk-fully
threaded parallel shank steel screws.
All the hardware locations shall be
reinforced with special polymeric Bars.

781to BMT-N.75 to
ITEMs DELETED
BMT-N.78
784
Providing and fixing PVC door cladding
to the flush doors shutters. For the new
doors it shall be pasted with Fevicol
785 SSR 998 or nailed to the old doors. 370
MAT-01338 BMT-N.09 complete as per direction of Engineer – 1 sqm
in – charge, manufacturers specification
and drawing - 1 mm thick
Providing and fixing PVC door cladding
to the flush doors shutters . For the new
doors it shall be pasted with Fevicol
786 SSR 998 or nailed to the old doors. 427
MAT-01339 BMT-N.10 complete as per direction of Engineer – 1 sqm
in – charge, manufacturers specification
and drawing - 1.5 mm thick
Providing and fixing PVC door cladding
to the flush doors shutters . For the new
doors it shall be pasted with Fevicol
787 SSR 998 or nailed to the old doors. 494
MAT-01340 BMT-N.11 complete as per direction of Engineer – 1 sqm
in – charge, manufacturers specification
and drawing - 2.0 mm thick

788 BMT-N.84 Providing and fixing factory made uPVC

129
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
white colour casement/Casementcum
fixed glazed door comprising of uPVC
multi-chambered frame, sashand
mullion (where ever required) extruded
profiles duly reinforced with 1.60 ± 0.2
mm thick galvanized mild steel section
made from roll formingprocess of
required length (shape & size according
to Upvc profile),uPVC extruded glazing
beads of appropriate
dimension,EPDMgasket,zinc alloy
(white powder coated) 3D hinges and
one handle oneach side
of panels along with zinc plated mild
steel multi point
lockinghavingtransmission gear, cylinder
with keeps and one side key,
G.Ifasteners100 x 8 mm size for fixing
frame to finished wall and
necessarystainlesssteel screws, etc.
Profile of frame & sash shall be mitred
cut andfusion
welded at all corners, mullion (if
required) shall be also
fusionweldedincluding drilling of holes
for fixing hardware's and drainage
ofwater etc.After fixing frame the gap
between frame and adjacent finished
wall shall
be filled with weather proof silicon
sealent over backer rod of required
sizeand of approved quality, all
complete as per approved drawing &
directionof Engineer-in-Charge
inclusive of cost of Single / double
glass panes and silicon sealent .
Note: For uPVC frame, sash and
mullion extruded profiles minus
5%tolerance in dimension i.e. in
depth & width of profile shall be
acceptable.Variation in profile
dimension in higher side shall be
acceptedbut no extra payment on
this account shall be made.
Casement door with 3D hinges made of
(big series) frame 67x 64 mm & sash 67
789 x 110 mm both having wall thickness of
MAT-05437 BMT-N.84.A 2.3 ± 0.2 mm and single glazing bead / 1 sqm 8630
double glazing bead of appropriate
dimension. (Area of door upto 2.00
sqm).
Casement door with top hung ventilator
790 MAT-05438 BMT-N.84.B 1 sqm
with 3D and S.S. frictionhinges (400 x 8910
19 x 1.9 mm) made of (big series) frame

130
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
67 x 64 mm, sash 67 x 110 mm &
mullion 67 x 80 mm all having wall
thickness of 2.3 ±. 0.2 mm and single
glazing bead / double glazing bead of
appropriate dimension.(Area of
doorupto
2.50 sqm)
Providing and fixing factory made
uPVC white colour sliding glazed
doorcomprising of uPVC multi-
chambered frame with in-built roller
track andsash extruded profiles duly
reinforced with 1.60 ± 0.2 mm thick
galvanizedmild steel section made
from roll forming process of required
length (shape & size according to
uPVC profile), appropriate dimension
uPVCextruded glazing beads, uPVC
extruded interlock and uPVC
extrudedInline sash adaptor (if
required), EPDM gasket, wool pile,
zinc alloy(white powder coated)
handle with key on one side of
extreme panels along with zinc plated
mild steel multi point locking having
transmissiongear with keeps, zinc
alloy (white powder coated) cresent
BMT-N.85 lock (ifrequired), stainless steel (SS
791
304 grade) body with adjustable
doublenylon rollers (weight bearing
capacity to be 120 kg), G.I fasteners
100 x
8 mm size for fixing frame to finished
wall and necessary stainless
steelscrews etc. Profile of frame &
sash shall be mitred cut and fusion
weldedat all corners, including drilling
of holes for fixing hardware's and
drainageof water etc. After fixing
frame the gap between frame and
adjacent
finished wall shall be filled with
weather proof silicon sealent over
backerrod of required size and of
approved quality, all complete as per
approveddrawing & direction of
Engineer-in-Charge inclusive of cost
of Single / double glass panes,wire
mesh and silicon sealent .
Note: For uPVC frame and sash
extruded profiles minus 5%
tolerancein dimension i.e. in depth
& width of profile shall be
acceptable. Variationin profile
dimension in higher side shall be
accepted but noextra
payment on this account shall be
made.
131
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
Two track two panels sliding door made
of (big series) frame 67 x 50 mm & sash
46 x 82 mm both having wall thicknessof
MAT-05439 BMT-N.85.A 2.3 ± 0.2 mm and single glazing bead / 1 sqm 6335
double glazingbead of appropriate
dimension. (Area of door above 2.00
792 sqm upto 5.00 sqm)
Three track three panels sliding door
with fly proof S.S wire
mesh (Two nos. glazed & one no. wire
mesh panels) made of(big series) frame
MAT-05440 BMT-N.85.B 116 x 45 mm & sash 46 x 82 mm both 1 sqm
7828
having wall thickness of 2.3 ± 0.2 mm
and single glazing
bead / double glazing bead of
appropriate dimension. (Area
793 of door above 2.00 sqm upto 5.00 sqm)
Providing and fixing of factory made of
High Density High MoistureResistant
Wood Fibre (HDHMR) single shutter
Duradoor made up of FRAME: Door
frame manufactured with High Density
High MoistureResistant Wood Fibre
(HDHMR) of 36mm width x 100mm
depth , laminated with 0.2mm thick PVC
Foil using hot press andPUR adhesive,
fitted with Gasket for energy efficiency
and noise protection,affixed to the wall
using high strength expandable PU
Foam/ self-expandable wall fixing
screws.Max dimensions in MM of 280
(depth) x 2440 (height)SHUTTER:
MAT-05441 BMT-N.86 Factory made 41mm thick shutter 1 sqm
sandwiched with High Density High
Moisture ResistantWood Fibre 11370
(HDHMR) of 5.5mm thick skinson both
sides and HDHMR of 30mm thickness
as skeleton,core of high density Honey
Comb and Laminated Veneer Lumber
(LVL) for holding the lock body
andhardware, laminated with 0.2mm
thick PVC Foil and edge-banded with
1mm thick PVCedge-band using hot
press and PUR adhesives. Max
dimensions in MM of 1200 (width) x
41(thickness) x 2400 (height),
ARCHITRAVE: Factory made
Architrave of size 80mm x 12mm fitted
to pre-made grooves within the frame
for addedaesthetics. Four design
variants available, made with Density
794 High Moisture Resistant Wood

132
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
Fibre(HDHMR) of different thicknesses
depending on the design variant,
laminated with 0.2mm thickPVC Foil
using hot press and PUR adhesive,
fitted to the wall using strong quick
actingadhesives.
HARDWARE & ACCESSORIES:
Imported hardware including door
handles – 1 no, cylindrical magnetic lock
-1 no ,SS hinges – 3 nos. Including cost
and conveyance of all material,
Hardware, Labour charges and
transportation complete for finished
item of work
Supply and fixing of Bath/Toilet Door
frame and shutter with 8mm laminated
(IS.15786)using with
50mmx35mmx1.3mmthick aluminum
door frame of weight 220grm per Rft
with a rebate of 30 mm for provision for
shutter , shutter made with
45mmx25mmx1.3mm thick aluminum
795 MAT-05442 BMT-N.87 section of weight 210grms per Rft with 1 sqm
8mm groove to accommodate 8mm 5511
thick laminated (IS.15786) and shutter
having 3nos of ss 304gr Butt hinges of
100mm long, 100mm aluminum handles
-2nos, and also 2 nos of 200mmx12mm
aluminum aldrops ,the rates inclusive of
all labor fixing at site and 50microns
Ivory powder coated for aluminum door
frame and shutter sections etc complete
finished item of work .
Providing and fixing 28 -30 MM thick
solid Wood Polymer Composite(WPC)
single extruded door shutter with 3MM
796 MAT-05443 BMT-N.92 top and bottom rigid layer with an overall 1 sqm
3512
density of 750kg/Cum. It will be fixed to
the frame using 3 inch /4 inch hinges. A
minimum of 4 hinges will be required for
fixing the door with the frame
BMT-N.93
DELETED

BMT-N.94
DELETED

BMT-N.95
DELETED
BMT-N.96
DELETED

133
801

BMT-N.97
DELETED

IV.SUB- CUP-BOARD DOORS

SECTION

Basic Rate
for SoR
S. CFMS code Item Description of item Unit 2024-25
No Code (Rs.)

1 2 3 4 5

Supply and fixing of Cement Bonded

Particle Board (IS 14276) cup board
frames and shutters and using 16mm
Cement Bonded Particle Board duly
802 MAT-01353 BMT-N.24 painted both sides with one coat of 1 sqm 2524
primer and two coats of synthetic /
enamel paint of approved shade and
brand including fixing of hardware like
M.S. powder coated Piano hinges of
size 18mm x 18mm, brass ball catches,
Aluminum tower bolts and handles ,
Godrej locks, Fevicol, screws and nails
including cost and conveyance of all
materials, labor charges, all incidental
and operational charges etc., complete
for finished item of work at site as per
the directions of Engineer in Charge.

Supply and fixing of Cement Bonded

Particle Board (IS 14276) box type cup
board using Cement Bonded Particle
Board for making frame of size 100mm
x 35mm using two sandwiched 16MM
boards, one Cement Bonded Particle
Board and one CEMENT BONDED
PRE-LAMINATED PARTICLE BOARDS
with plain 35mm wood lipping. The
Shutters are made of 16MM thick
CEMENT BONDED PRE-LAMINATED
PARTICLE BOARDS (Pre-Laminated
Cement Bonded Particle Board) of
approved shade inclusive of hardware 1
803 MAT-01358 BMT-N.29 4069
like M.S. powder coated Piano hinges of Sqm
size ¾” x ¾” , Aluminum powder coated
handles of size 4” (101.6mm), Aluminum
tower bolt 4” (101.6mm) Godrej locks,
screws, wood lipping and Fevicol etc.,
complete finish item of work.

134
 Supply and fixing of cupboard shutter
using teakwood scantling of size 50mm
X50mm teakwood as outer frame and
50mm X 30 mm of size teakwood for
shutter frames , 8mm thick Bison Lam
as panel to each shutter consist of 2
Nos 75mm long tower bolt – 2 nos 75
mm big handle the and other shutter will 4285
have 1 no of cupboard lack , 1 No of 75
mm long handle and 75mm10mmX1mm 1
804 MAT-01400 BMT-N.71 thick SS hinges- 2 Nos for each shutter. Sqm
The above frame will be fixed to the wall
with screws, the rate inclusive of
screws, handle, etc., complete at site of
work.
Supply and fixing of SINGLE PANEL
30mm thick door shutters(NANDI or
equivalent) made of rigid PVC extruded
hollow section of 20mm X 635mm with the
wall thickness of 1.Omm+/- 0.1mm. The
shutter frame is made of 3OmmX79mm
with the wall thickness of 1.5mm +/-
0.15mm section mitre-cut and joined at 4 1
805 BMT-N.89 2894
corners with 125mmX225mm plastic Sqm
brackets. Teak wood batons shall be
reinforced inside the door shutter during
the fabrication of the door shutter at those
points wherever the hardware is fixed on
to the door shutter

Supply and fixing of door frame (NANDI or

EQUIVALENT) made of hollow extruded
PVC section having dimensions of 40 X
57mm with the wall thickness of 2mm +1-
1
806 BMT-N.90 0.2mm duly reinforced with seasoned 244
Sqm
wood plank at the hinges side. The door
frame top 2corners shall be metri-cut/
welded. PVC DOOR FRAME

Supplying & fixing SINGLE PANEL 30mm

thick PVC DOOR frame (NANDI or
EQUIVALENT), door shutters with shutter
frame and Infill panel made from PVC
material, the shutter frame made out of
PVC extruded sections having overall
dimensions of 105 mm x 30 mm with wall
thickness of 1.3mm ± 0.3 mm, with the
Infill panel made out of multi chambered
seamless hollow PVC extruded panel 1
807 BMT-N.91 2894
having overall dimensions of 610 mm x 20 Sqm
mm having wall thickness 1 mm ± 0.2 mm
with the shutter frame meter cut and joined
at corners and all the hardware locations
reinforced with special polymeric
bars/wooden Battens as per drawing
including providing special PVC
bracket/Wooden Battens on hinge side etc
complete

135
 WINDOWS
(Landing cost – including loading,
P.SECTION cost of conveyance, unloading)
I.SUB-
OPENABLE WINDOWS
SECTION

Supply and fixing of pre-painted steel

openable windows base steel as per
IS 513 of -0.58 mm thick 'D" quality,
galvanized as per IS 277 , finish painted
with a polyester paint of 12-16 microns
thick and back coated with 5-7 microns
thick alkyd backer, section for outer
frame of 46 x 52 mm section and for
shutter of 46 x 46 mm section for
mullion 46 x 70 mm, and section for
808
beading should be 18 x 25 mm with 5
mm thick plain float glass fitted with
Ethyl propylene Diamine monomer
Gasket (EPDM) and handle made of
high grade aluminium powder coated
with frames fixed to the concrete
/masonry wall by means of self
expanding screws including 10 mm
square guard bars with 6" pitch
complete for finished item of work .

Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Windows: Single shutter 2'0 x 4'0
809 (609.6 x 1219.2 mm ) Outer frame 6492
MAT-01409 BMT-P.01 section size of 46 x 52 mm shutter 1 sqm
frame section size of 46 x 46 mm
Windows: Double shutter 3'-0" x 4'-0"
810 (914.4mm x 1219.2 mm) outer frame 1 6492
MAT-01410 BMT-P.02 section size of 46 x 52 mm shutter Sqm
frame section size of 46 x 46 mm
Windows: Double shutter 3'-0" x 4'-0"
(914.4mm x 1219.2 mm) outer frame
811 section size of 46 x 52 mm shutter 1 6908
MAT-01411 BMT-P.03 frame section size of 46 x 46 mm Sqm
Mullion section size of 46 x 70 mm
Windows: Double shutter 4'-0" x 4 '-0"
812 (1219.2x12.19.2mm) outer frame 1 6687
MAT-01412 BMT-P.04 section size of 46 x 52 mm shutter Sqm
frame section size of 46 x 46 mm
Windows: Double shutter 4'-0" x 4 '-0"
(1219.2x1219.2mm) outer frame
813 section size of 46 x 52 mm shutter 1 6671
MAT-01413 BMT-P.05 frame section size of 46 x 46 mm Sqm
Mullion section size of 46 x 70 mm
Windows: Double shutter 4'-6" x 4 '-6"
(1371.6x1371.6mm) outer frame section
814 size of 46 x 52 mm shutter frame 1 6166
MAT-01414 BMT-P.06 section size of 46 x 46 mm Mullion Sqm
section size of 46 x 70 mm

136
 Windows: Centre fixed both side
openable shutter 5'-0" x 4'-0"
(1524x1219.2mm) outer frame section
815 size of 46 x 52 mm shutter frame 6166
1
MAT-01415 BMT-P.07 section size of 46 x 46 mm Mullion Sqm
section size of 46 x 70 mm fixed
beading section size of 18 x 25 mm

Windows: Centre fixed both side

openable shutter 6'-0" x 4'-
0"1828.8x1219.2mm) outer frame
1
816 MAT-01416 BMT-P.08 sectionsize of 46 x 52 mm shutter 6351
Sqm
frame section size of 46 x 46 mm
Mullion section size of 46 x 70 mm fixed
beading section size of 18 x 25 mm

Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Windows: Centre fixed both side
openable shutter 6'-0" x 4'-6"
(1828.8x1371.6mm) outer frame section
size of 46 x 52 mm shutter frame 6620
1
817 MAT-01417 BMT-P.09 section size of 46 x 46 mm Mullion Sqm
section size of 46 x 70 mm fixed
beading section size of 18 x 25 mm
Providing and fixing of Openable
Windows made of pre-painted steel
(Base steel as per IS 513 of 0.58 mm
thick galvanized as per IS 277 with Zinc
of 120 GSM), primer coated with epoxy
primer of 5-7 microns thick, finish
painted with a polyester paint of 12-16
microns thick and back coated with 5-7
microns thick alkyd backer and section
for outer frame of 48 x 50 mm, centre
mullion of 48 x 50 mm, section for
shutter of 48 x 25 mm and the fixed
glass beading section should be 12 x 12
mm and the outer frame and mullions to
have rebate for glazed shutter with a 20
mm provision for guard bars/grills and
the sections cut to length metre joined
with corner bracket, centre mullion fixed
with mullion cap, handle, stay, 2 nos. of
stainless steel heavy duty pivot hinges
provided per shutter and windows fitted
with 5 mm thick plain float glass with
rubber gaskets including fixing the
frames in concrete/masonry wall by
means of self expanding screws,
Including 10mm Square guard bars with
6” (152.4mm) pitch etc., complete for
finished item of work.

137
 Single shutter Window 2’0”x4’0”
818 (609.6mm x 1219.2mm). Outer frame 1 5855
MAT-01424 BMT-P.16 section size of 48x50mm shutter frame Sqm
section size of 48 x 25 mm.

Double shutter Window with vertical

mullion 3’0” x 4’0” ( 914.4mm x
819 1219.2mm) outer frame section size of 6251
48x50mm shutter frame section size of 1
MAT-01425 BMT-P.17
48 x 25 mm. Mullion section size of Sqm
48x50mm.

Double shutter Window with vertical 1

820 MAT-01426 BMT-P.18 member4’0” x 4’0” (1219.2mm x Sqm 6356

Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

1219.2mm) outer frame section size of

48x50mm shutter frame section size of
48 x 25 mm and mullion section should
be of 48x50mm.

Centre fixed both side openable shutter

window 5’0”x4’0” (1524mm
x1219.2mm). Outer frame section size 5669
of 48x50mm. Shutter frame section size 1
821 MAT-01427 BMT-P.19 of 48 x 25 mm. Mullion section size of Sqm
48x50mm. Fixed beading section size
of 12x12mm.

Centre fixed both side openable shutter

window 6’0”x4’0” (1828.8mm
x1219.2mm). Outer frame section size
of 48x50mm. Shutter frame section size 4655
1
822 MAT-01428 BMT-P.20 of 48 x 25 mm. Mullion section size of Sqm
48x50mm. Fixed beading section size
of 12 x 12mm.

138
 Providing & Fixing of Openable
Windows with Fly-mesh made of pre-
painted steel (Base Steel as per IS 513
of 0.58 mm thick galvanized as per IS
277 with zinc of 150 GSM) primer
coated with epoxy primer of 5-7 microns
thick, finish painted with a polyester
paint of 12-16 microns thick and back
coated with 5-7 microns thick alkyd
backer and the section for outer frame
of 72 x 55mm, centre mullion of 72 x
50mm, section for fixed glass beading
section of 12 x 12 mm and section for
shutters of 48 x 25 mm and outer frame
& mullion sections with rebate for glazed
shutters, fly mesh and a 20 mm
provision for guard bars/grills and fly
mesh shutter section of 20 x 40 mm and
the sections cut to length metre joined
with corner bracket, centre mullions
fixed with mullion cap, stay, handles,
latch 2 Nos of heavy duty stainless steel
pivot hinges per shutter and panelled
with 5mm thick plain float glass and S.S.
Mesh for fly mesh shutter (304 grade),
fitted using rubber gaskets including
fixing the windows in the
concrete/masonry wall by means of self
expanding screws, including 10mm
Square guard bars with 6” (152.4mm)
pitch , complete for finished item of work
Single shutter Window 2’0”x4’0”
(609.6mm x 1219.2mm). Outer frame 1
823 MAT-01429 BMT-P.21 section size of 72x50mm shutter frame 5998
Sqm
section size of 48 x 25 mm.
Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Double shutter Window with vertical
mullion 3’0” x 4’0” ( 914.4mm x
824 1219.2mm) outer frame section size of 7907
72x50mm shutter frame section size of 1
MAT-01430 BMT-P.22
48 x 25 mm. Mullion section size of Sqm
72x50mm.
Double shutter Window with vertical
member4’0” x 4’0” (1219.2mm x
825 1219.2mm) outer frame section size of 7191
72x50mm shutter frame section size of 1
MAT-01431 BMT-P.23
48 x 25 mm and mullion section should Sqm
be of 72x50mm.
Centre fixed both side openable shutter
window 5’0”x4’0” (1524mm
x1219.2mm). Outer frame section size
826 of 72x50mm. Shutter frame section size 6486
1
MAT-01432 BMT-P.24 of 48 x 25 mm. Mullion section size of Sqm
72x50mm. Fixed beading section size
of 12 x 12 mm.

139
 Centre fixed both side openable shutter
window 6’0”x4’0” (1828.8mm
x1219.2mm). Outer frame section size
827 of 72x50mm. Shutter frame section size 6681
1
MAT-01433 BMT-P.25 of 48 x 25 mm. Mullion section size of Sqm
72x50mm. Fixed beading section size
of 12 x 12 mm.

828 MAT-01438 BMT-P.30 ITEM DELETED

829 MAT-01439 BMT-P.31 ITEM DELETED

Galvanized powder coated Casement

Windows with openable shutters duly
manufactured using pressed steel
sections in mild steel conforming to IS
513 of having 1.0 mm thick and
galvanized as per IS 277 of 120 GSM
surface treatment with pure polyester
powder coating of 30-40 microns thick
and section for outer frame of
60x50mm, centre for mullion of
62x50mm, section for shutter of 52 x 22
830 mm, outer frame and mullions to have
one side rebate for glazed shutter of
size 24 mm and 10x10 mm square
guard bars provided at 125 mm c/c the
sections assembled with bolt & nut
assembly with zinc-electroplated M-5 1 6071
MAT-01440 BMT-P.32 Sqm
bolts, GI Handle of size 80 mm x 15 mm
-1 No per shutter, 2 nos of stainless
steel heavy duty pivot hinges of size 3"
of SS 304 Grade per shutter, window
panes with 5 mm thick plain float glass
and fixed with glass beading section of
10x12 mm size with 0.8 mm thick

Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)

1 2 3 4 5

powder coated aluminium 'U' channel

and window frames fixing to the
concrete/masonry wall arrangement with
self expanding screws, complete for
finished item of work - 1220 x 1372 or
below size

140
 Galvanized powder coated Casement
Windows with openable shutters duly
manufactured using pressed steel
sections in mild steel conforming to IS
513 of having 1.0 mm thick and
galvanized as per IS 277 of 120 GSM
surface treatment with pure polyester
powder coating of 30-40 microns thick
and section for outer frame of
60x50mm, centre for mullion of
62x50mm, section for shutter of 52 x 22
mm, outer frame and mullions to have
one side rebate for glazed shutter of
size 24 mm and 10x10 mm square
guard bars provided at 125 mm c/c the
sections assembled with bolt & nut
assembly with zinc-electroplated M-5
bolts, GI Handle of size 80 mm x 15 mm
-1 No per shutter, 2 nos of stainless
steel heavy duty pivot hinges of size 3"
of SS 304 Grade per shutter, window 1
831 MAT-01441 BMT-P.33 panes with 5 mm thick plain float glass Sqm 5172
and fixed with glass beading section of
10x12 mm size with 0.8 mm thick
powder coated aluminium 'U' channel
and window frames fixing to the
concrete/masonry wall arrangement with
self expanding screws, complete for
finished item of work - 1530 x 1372 or
above size

Galvanized powder coated Casement

Windows with openable shutters duly
manufactured using pressed steel
sections in mild steel conforming to IS
513 of having 1.0 mm thick and
galvanized as per IS 277 of 120 GSM
surface treatment with pure polyester
powder coating of 30-40 microns thick
and section for outer frame of
88x50mm, centre for mullion of 62x88
mm, section for glass and fly-proof
mesh shutter of 52 x 22 mm, outer 1 7309
832 MAT-01442 BMT-P.34 frame and mullions to have two sides Sqm
rebate for glazed shutter of size 24 mm
and 10x10 mm square guard bars
provided at 125 mm c/c the sections
assembled with bolt & nut assembly with
zinc-electroplated M-5 bolts, GI Handle

141
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
of size 80 mm x 15 mm -1 No per
shutter, 2 Nos of stainless steel heavy
duty pivot hinges of size 3" of SS 304
Grade per shutter, window panes with 5
mm thick plain float glass and fixed with
glass beading section of 10x12 mm size
with 0.8 mm thick powder coated
aluminium 'U' channel and fly-proof
mesh of SS 304 grade fixed with 18 mm
x 12 mm BT wood beading and window
frames fixing arrangement to the
concrete/masonry wall with self
expanding screws, complete for finished
item of work - 1220 x 1372 or below size
Galvanized powder coated Casement
Windows with openable shutters duly
manufactured using pressed steel
sections in mild steel conforming to IS
513 of having 1.0 mm thick and
galvanized as per IS 277 of 120 GSM
surface treatment with pure polyester
powder coating of 30-40 microns thick
and section for outer frame of
88x50mm, centre for mullion of 62x88
mm, section for glass and fly-proof
mesh shutter of 52 x 22 mm, outer
frame and mullions to have two sides
rebate for glazed shutter of size 24 mm
and 10x10 mm square guard bars
provided at 125 mm c/c the sections 6930
assembled with bolt & nut assembly with
zinc-electroplated M-5 bolts, GI Handle
of size 80 mm x 15 mm -1 No per
shutter, 2 Nos of stainless steel heavy
duty pivot hinges of size 3" of SS 304
Grade per shutter, window panes with 5 1
833 MAT-01443 BMT-P.35 mm thick plain float glass and fixed with Sqm
glass beading section of 10x12 mm size
with 0.8 mm thick powder coated
aluminium 'U' channel and fly-proof
mesh of SS 304 grade fixed with 18 mm
x 12 mm BT wood beading and window
frames fixing arrangement to the
concrete/masonry wall with self
expanding screws, complete for finished
item of work - 1530 x 1372 orabove size
Providing & Fixing of Mesh windows
made of pre-painted steel (Base Steel
as per IS 513 of 0.58mm thick
galvanized as per IS 277 with zinc of 4835
120 GSM), primer coated with epoxy 1
834 MAT-01444 BMT-P.36 primer of 5-7 microns thick, finish Sqm
painted with a polyester paint of 12-16
microns thick and back coated with 5-7

142
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
microns thick alkyd backer, section for
outer frame of 47 x 36 mm, centre
mullion of 60 x 36 mm, section mesh
beading 18 x 6 mm and Fly mesh
shutter section of 20 x 40 mm, the
sections cut to length meter joined with
corner bracket and centre mullions fixed
with mullion cap, handles, latch, 2 Nos
of heavy duty stainless steel pivot
hinges per S.S. Mesh for fly mesh
shutter (304 grade) including fixing the
frames in the concrete/masonry wall by
means of self expanding screws
complete for finished item of work.
Providing and fixing of Openable /
Casement Windows made of pre-
painted steel (Base steel as per IS 513
of 0.80 mm thick galvanized as per IS
277 with Zinc of 120 GSM), finish
painted with a polyester paint of 60-65
microns thick and section for outer
frame of 80 x 45 mm, centre mullion of
80 x 60 mm, section for shutter of 52 x
25 mm x 0.6 mm thick, outer frame and
mullions to have rebate for glazed
shutter with a provision for guard
bars/grills and the sections cut to length
metre joined with corner bracket, centre
mullion fixed with mullion cap, 1 No. of
High grade nylon latch handle, window
stopper, 2 nos. of with MS Powder
coated /SS ball bearing butt Hinges
provided per shutter and windows fitted
with 4 mm thick plain float glass with
rubber gaskets including fixing the
frames in concrete/masonry wall by
means of self expanding screws,
Including 10 mm Square guard bars with
6” (152.4mm) pitch etc., complete for
finished item of work.
Single openable shutter window size of
2’ 0” x 4’ 0” (609.6 x 1219.2mm) outer
835 frame section size of 80 x 45mm, 5456
MAT-01454 BMT-P.46 shutter frame section size of 52 x 25mm 1 sqm
thick
Double openable shutter window Size of
3’ 0” x 4’ 0” (914.4mm x 1219.2mm)
836 outer frame section size of 80 x 5838
MAT-01455 BMT-P.47 45mm,shutter frame section size of 52 x 1 sqm
25mm, vertical mullion section size of 80
x 60 mm
Double openable shutter window size of
837 MAT-01456 BMT-P.48 4’0” x 4’0” (1219.2mm x 1219.2mm) 1 sqm 5838

143
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
outer frame section size 80 x 45mm,
shutter frame section size of 52 x 25
mm ,Vertical mullion section size of 80 x
60 mm
Double Openable Shutter and Center
Fixed window of size 5’0 x 4’0 ( 1524 x
1219.2mm)outer frame section size of
80mm x 45mm, shutter frame section 5127
size of 52 x 25mm ,Vertical mullion
838 MAT-01457 BMT-P.49 section size of 80 x 60 mm, beading 1 sqm
section size of 9 x 12mm to be provided
for glass holding
Double Openable Shutter and Center
Fixed window of size 6’0 x4’0 ( 1829.6 x
1219.2mm)outer frame section size of
80mm x 45mm , shutter frame section 5127
size of 52 x 25mm ,Vertical mullion
839 MAT-01458 BMT-P.50 section size of 80 x 60 mm, beading 1 sqm
section size of 9 x 12mm to be provided
for glass holding
Note: The above rates are for normal
finish, 10% extra may be allowed for
Wood Grain finish
Providing and fixing of Openable /
Casement Windows with fly mesh made
of pre-painted steel (Base steel as per
IS 513 of 0.80 mm thick galvanized as
per IS 277 with Zinc of 120 GSM), finish
painted with a polyester paint of 60-65
microns thick and section for outer
frame of 100 x 45 mm, centre mullion of
100 x 60 mm, section for shutter of 52 x
25 mm x 0.6 mm thick, section for fly-
shutter of 52 x 25 mm x 0.6 mm thick
and fitted with stainless steel 32 gauge
fly mesh of 304 grade with 144 holes
per sq.inch and mullions to have double
rebate for glazed shutter and fly-shutter
with a provision for guard bars/grills and
the sections cut to length metre joined
with corner bracket, centre mullion fixed
with mullion cap, 1 No. of High grade
nylon latch handle, window stopper, 2
nos. of with MS Powder coated /SS ball
bearing butt Hinges provided per shutter
and windows fitted with 4 mm thick plain
float glass with rubber gaskets including
fixing the frames in concrete/masonry
wall by means of self expanding
screws, Including 10 mm Square guard
bars with 6” (152.4mm) pitch etc.,
complete for finished item of work.

144
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Single openable shutter window size of
2’ 0” x 4’ 0” (609.6 x 1219.2mm) outer
840 frame Double rebate section size of 100 5127
MAT-01459 BMT-P.51 x 45mm, Glazed and flymesh shutter 1 sqm
profile section size of 52 x 25mm
Double openable shutter window Size of
3’ 0” x 4’ 0” (914.4mm x 1219.2mm)
outer frame Double rebate section size
841 of 100 x 45mm, Glazed and flymesh 6998
MAT-01460 BMT-P.52 shutter profile section size of 52 x 1 sqm
25mm, vertical mullion section size of
100 x 60 mm
Double openable shutter window size of
4’0” x 4’0” (1219.2mm x 1219.2mm)
outer frame Double rebate section size
842 of 100 x 45mm, Glazed and flymesh 7233
MAT-01461 BMT-P.53 shutter profile section size of 52 x 1 sqm
25mm, vertical mullion section size of
100 x 60 mm
Double Openable Shutter and Center
Fixed window of size 5’0 x 4’0 ( 1524 x
1219.2mm)outer frame section size of
843 80mm x 45mm , shutter frame section 7627
size of 52 x 25mm ,Vertical mullion
MAT-01462 BMT-P.54 section size of 100 x 60 mm , beading 1 sqm
section size of 9 x 12mm to be provided
for glass holding
Double Openable Shutter and Center
Fixed window of size 6’0 x4’0 ( 1829.6 x
1219.2mm)outer frame section size of
844 80mm x 45mm , shutter frame section 7192
size of 52 x 25mm ,Vertical mullion
MAT-01463 BMT-P.55 section size of 100 x 60 mm , beading 1 sqm
section size of 9 x 12mm to be provided
for glass holding
Note: The above rates are for normal
finish, 10% extra may be allowed for
Wood Grain finish
845 MAT-01481 BMT-P.73 ITEM DELETED
Supplying and fixing of WINDOWS
with Pre laminated Cement Bonded
Particle boards and Pre-Painted Steel
Sections (PPS)fabricated from pre-
painted Cold rolled formed sections
made of galvanized steel color coated
sections (Base steel as per IS-512 D
quality, galvanized as per IS-277 with
Zinc of 120 gram/sqm) with total coated
thickness of 0.58mm primer coated with
epoxy primer of 5-7 microns thick,
finish painted with polyester paint of

145
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
12-16 microns and back coated with
alkyd backer of 5-7 microns), sections
for outer frame and centre mullion (duly
filled with PU form of 40 kg/Cum) of
60mm x 50mm, with provision for fixing
glazed shutter and the section for
glazed/paneled of size 48 mm x 25 mm
and another section of size 60 mm x 23
mm provided for separating glazed and
paneled portion, the section cut to
length and miter jointed with plastic
corner brackets and with corner
brackets for window outer frames of
50mm x 60mm, the mullion section fixed
to the frame with plastic mullion cap and
stiffener plates of size 60 mm x 50 mm
made of 1.25mm thick CRCA
electroplated provided to fix window
frames to concrete/masonry, gasket for
fixing glass and 10mm both sides pre-
laminated cement bonded particle board
and 5 mm thick color pin headed glass
provided for glazing and providing guard
bars of 10 mm square rods duly welded
at 150 mm pitch to MS flat section of
size 18 mm and 3 mm thick, and fixed to
wall by means of self expansion nylon
Cap (75) and electroplated wooden
screws of size 100 mm, together with
aluminum powder coated fittings, A)
75mm long grip handles 1 no per
shutter, B) 75 mm long tower bolts 2
nos. per shutter, C) Heavy duty SS Pivot
hinges 2 no’s per shutter, D) MS
Powder coated telescopic stay 1 no per
shutter.
Pre Laminated Cement Bonded Particle
Board WINDOWS – Single shutter 6333
846 2’0”x4’0” outer frame section size of 1
MAT-01484 BMT-P.76-A 50mm x 60mm shutter frame section Sqm
size of 48mm x 25mm.
Pre Laminated Cement Bonded Particle
Board WINDOWS –Double shutter 3’0”
847 x 4’0” outer frame section size of 50mm 6420
x 60mm shutter frame section size of 1
MAT-01485 BMT-P.76-B
48mm x 25mm mullion section size Sqm
of50mm x 60mm for outer frame.
Pre Laminated Cement Bonded Particle
Board WINDOWS – Double shutter 3’0”
848 x 3’0” outer frame section size of 50mm 6681
x 60mm shutter frame section size of 1
MAT-01486 BMT-P.76-C
48mm x 25mm Mullion section size Sqm
of50mm x 60mm for outer frame.

146
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Pre Laminated Cement Bonded Particle
Board WINDOWS – Double shutter
4’0”x4’0” outer frame section size of
50mm x 60mm shutter frame section 1 6170
849 MAT-01487 BMT-P.76-D
size of 48mm x 25mm Mullion section Sqm
size of50mm x 60mm for outer frame.
II.SUB-
SLIDING WINDOWS
SECTION
Providing and fixing Pre painted Steel
sliding Window/Door fabricated from
roll formed sections made of Galvanized
steel colour coated /powder coated
(Base Steel as per IS 513 ‘D’ quality
galvanized as per IS 277 with Zinc of
120 Gms./ Sq.mtr) with total coated
thickness of 0.58mm. Primer Coat with
epoxy primer of 5-7 microns thick,
finished paint with a polyester paint of
12-16 microns thick and back coated
with Alkyd backer of 5-7 microns or
powder coated with pure polyester
powder up to 50-60 microns thick.
The External Section for two track
Sliding Window should be of 44 x 59mm
with a provision for bottom track insert
profile of 10x9 mm made of aluminium.
Section for Window glass shutter should
be of 35x49mm, Section for Window
Euro groove should be of 25x24mm
made of plastic to accommodate
standard accessories, and section for
window lap strip should be of 21x4mm
made of plastic.
Section for Door shutter should be of
35x67mm, Section for Door Euro
Groove 25x31mm made of plastic to
accommodate standard accessories and
size of lap strip should be of 39x41mm.
The Window/Door to be panelled with
5mm thick plain float glass. The gaskets 1
850 MAT-01434 BMT-P.26 are to be made of Ethyl Propylene 7377
Sqm
Diamine Manomer [EPDM]. Corner
Brackets for internal and external frame
to be made of glass filled nylon. Touch
lock to be provided for Window Shutter.
Sections are to be cut to length, joined
and assembled by means of corner
brackets. The above frame to be fixed to
Brick/Concrete masonry by using Nylon
self-expanding caps and driving MS
electroplated 80mm screws into the
caps through frames. The Grill for safety
for windows to be made of 10mm thick
square rod bars with 152mm pitch for

147
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
complete item of work . For Door there
will be no Safety Grill including cost and
conveyance of all materials,
accessories, labour charges for
transportation, erection at site complete
for finished item of work.
851 MAT-01435 BMT-P.27 ITEM DELETED
852 MAT-01436 BMT-P.28 ITEM DELETED
853 MAT-01437 BMT-P.29 ITEM DELETED
Providing and fixing COMPOSITE
SLIDING WINDOW fabricated from roll
formed sections made of Galvanized
Steel colour Coated/Powder Coated
(Base Steel as per IS 513 “D” quality,
Galvanized as per IS 277 with Zinc of
120 grams /Sq.Mtr.) with total coated
thickness of 0.58 mm, powder coated
with pure Polyester Powder up to 50-60
microns thick and the section for
external frame bottom of 68 x 25mm
(Aluminium), External frame sides & Top
of 68 x 25 mm (Aluminium), section for
shutter of 59 x 23mm and Lap Strip of
30 x 7.5mm (uPVC) cut to length and
854 mitre joined with L-bracket and 5 mm
plain float Galss with Ethyl Propylene
Diamine Monomer (EPDM) gasket, the
corner bracket for external frame made
of Aluminium ‘L’-Angle, Corner Bracket
for internal frame made of Polyproylene,
Crescent Latch, Rollers, & EPDM 1 6295
MAT-01445 BMT-P.37 Gaskets for shutters, wool pile for lap Sqm
strip, Bump Stop Base & Rubber for
shutter stopper including fixing to
brick/concrete masonry using Nylon
self-expanding caps and driving MS
electroplated 80mm long screws into the
caps through frames and fixing 10mm
square guard bars with 6” pitch centre to
centre (152.4mm) completed for finished
item of work
Providing and fixing of Two shutter
Sliding Windows made of Galvanized
Steel (Base Steel as per IS 513, D
quality, galvanized as per IS 277 with
Zinc of 120 GSM), using factory made
section powder coated with Pure
polyester powder upto 50-60 microns
thick with total coated thickness of 0.58
mm for Outer Frame and 0.58 mm
thickness for Sliding Shutter Section, the
Outer Frame for Two Tracks with Grill

148
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
provision size of 90 mm x 50 mm and
without grill provision is of 75 mm x 50
mm and the Window Shutter section of
0.58 mm x 36 mm and the outer Frame
with two integrated guide tracks of
12mm width and 24mm deep for
provision to slide the Shutter / sash
frame and facilitates with a water drain
outlet component made of PVC and the
shutter frame fitted with 5mm thick plain
float glass of reputed make and fixed
with EPDM weathering seal resistant
accessories and handle made of
Alumimium 1 No. per each shutter and
cut to length miter joined with corner
brackets including installation of window
system at site using anchor fasteners,
Silicon sealant applied at the Outer
frame corners inclusive of conveyance
of all materials accessories, labour
charges, and erection at site with
complete finished item of work.
a) Window with Two Sliding Shutters
855 and without Grill Outer Frame Size 75 1 6752
MAT-01446 BMT-P.38 Sqm
mm x 50 mm.
b) Window with Two Sliding Shutters
and with Grill Outer Frame Size 90 mm
x 50 mm have a rebate of 15mm x 5 mm
856 to fit grill made of 10mm MS Sq Rods 6897
1
MAT-01447 BMT-P.39 for horizontal bars welded at a regular Sqm
pitch of 150mm to 12mm x 6 mm MS
flat.
Providing and fixing of Three shutter
Sliding Windows made of Galvanized
Steel (Base Steel as per IS 513, D
quality, galvanized as per IS 277 with
Zinc of 120 GSM), using factory made
section powder coated with Pure
polyester powder upto 50-60 microns
thick with total coated thickness of 0.58
mm for Outer Frame and 0.58 mm
thickness for Sliding Shutter Section, the
Outer Frame for three tracks with grill
provision size of 105 mm x 50 mm and
without grill provision is of 90 mm x 50
mm and the Window Shutter section of
58 mm x 36 mm and the outer Frame
with two integrated guide tracks of
12mm width and 24mm deep for
provision to slide the Shutter / sash
frame and facilitates with a water drain
outlet component made of PVC and the
shutter frame fitted with 5mm thick plain

149
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
float glass of reputed make and fixed
with EPDM weathering seal resistant
accessories and handle made of
Alumimium 1 No. per each shutter and
cut to length miter joined with corner
brackets including installation of window
system at site using anchor fasteners,
Silicon sealant applied at the Outer
frame corners inclusive of conveyance
of all materials accessories, labour
charges, and erection at site with
complete finished item of work.
Window with 3 shutters (center fixed
shutter / Center sliding shutter / center
Fly mesh shutter) and with Grill Window
made of Outer Frame of Size 105 mm x
50 mm. Grill made of 10mm MS Square
Rods for horizontal bars at a regular
pitch of 150mm welded to MS flat of 12
x 6 mm.
i) Center Shutter Fixed: center shutter
frame made of section with size 20mm x
47mm should be fitted with 5mm thick
plain float glass of reputed make, EPDM
857 gasket all around the glass and fixed to 6837
the Outer Frame with the supporting 1
MAT-01448 BMT-P.40 section of size 29mm x 20mm of Sqm
0.58mm thick fixed horizontally on top
and bottom of the shutter frame.
ii) Center Shutter Sliding: center shutter
frame made of section of size 20mm x
47mm should be fitted with 5 mm
thick plain float glass of reputed make.
The supporting guide section of size
858 15mm x 19mm of 0.58mm thick fixed 7597
horizontally at top and bottom of shutter 1
MAT-01449 BMT-P.41 frame and slides along the bottom and Sqm
top guide tracks made of sections size
24mm x 20mm of 0.58mm thick and
29mm x 20mm of 0.58mm thick
iii) Center Fly mesh Shutter Sliding:
Section for Fly mesh Shutter frame
should be of size 20mm x 40mm of
0.58mm thick and fitted with SS mesh
(304 Grade). The supporting guide
section of size 29mm x 20mm of
859 0.58mm thick at the bottom and 15mm x 7597
19mm of 0.58mm thick at the top fixed
horizontally to the Fly mesh frame and 1
MAT-01450 BMT-P.42
slides along the bottom and top guide Sqm
tracks made of sections size 20mm x
20mm of 0.58mm and 29mm x 20mm of
0.58mm.

150
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Window with 3 shutters (Center fixed
shutter / Center sliding shutter / center
Fly mesh shutter) and without Grill
Window made of Outer Frame of size
90mm x 50mm.
i) Center Shutter Fixed: center shutter
frame made of section with size 20mm x
47mm of 0.58mm thick should be fitted
with 5mm thick plain float glass of
reputed make, EPDM gasket all around 6373
the glass and fixed to the Outer Frame
860 with the supporting section of size 1
MAT-01451 BMT-P.43 Sqm
29mm x 20mmof 0.58mm thick fixed
horizontally on top and bottom of the
shutter frame.
ii) Center Shutter Sliding: center shutter
frame made of section with size 20mm x
47mm of 0.58mm thick should be fitted
with 5 mm thick plain float glass of
reputed make. The supporting guide
section of size 15mm x 19mm of 6887
0.58mm thick fixed horizontally at top
861 and bottom of shutter frame and slides 1
MAT-01452 BMT-P.44 along the bottom and top guide tracks Sqm
made of sections size 24mm x 20mm of
0.58mm thick and 29mm x 20mm of
0.58mm thick.
iii) Center Fly mesh Shutter Sliding:
Section for Fly mesh shutter frame
should be of size 20mm x 40mm and
fitted with SS mesh (304 Grade). The
supporting guide section of size 29mm x
20mm of 0.58mm thick at the bottom 6865
and 15mm x 19mm of 0.58mm thick at
the top fixed horizontally to the Fly mesh 1
862 MAT-01453 BMT-P.45 frame and slides along the bottom and Sqm
top guide tracks made of sections size
20mm x 20mm of 0.58mm thick and
29mm x 20mm of 0.58mm thick.
835 to BMT-P.70 to
ITEM DELETED
837 P.72
Providing and fixing factory made uPVC
white colour casement/casementcum
fixed glazed windows comprising of
uPVC multi-chambered frame,sash and
mullion (where ever required) extruded
profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild
838 BMT-P.78 steel section made from rollforming
process of required length (shape & size
according to uPVCprofile), uPVC
extruded glazing beads of appropriate

151
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)

1 2 3 4 5
dimension, EPDMgasket, stainless steel
(SS 304 grade) friction hinges, zinc alloy
(white
powder coated) casement handles, G.I
fasteners 100 x 8 mm size forfixing
frame to finished wall, plastic packers,
plastic caps and necessarystainless
steel screws etc. Profile of frame & sash
shall be mitred cut
and fusion welded at all corners, mullion
(if required) shall be also fusionwelded
including drilling of holes for fixing
hardware's and drainage ofwater etc.
After fixing frame the gap between
frame and adjacent finishedwall shall be
filled with weather proof silicon sealant
over backer rod of
required size and of approved quality, all
complete as per approveddrawing &
direction of Engineer-in-Charge
inclusive of cost of Single / double glass
panes and silicon sealant .
Note: For uPVC frame, sash and
mullion extruded profiles minus
5%tolerancein dimension i.e. in depth
& width of profile shall be
acceptable.Variation in profile
dimension in higher side shall be
acceptedbut no extra payment on
this account shall be made.
Casement window double panels with
top fixed with S.S. frictionhinges (350 x
19 x 1.9 mm) made of (small series)
MAT-05444 BMT-P.78.A frame47 x 50mm, sash 47 x 68 mm &
Sqm 7006
mullion 47 x 68 mm allhaving wall
thickness of 1.9 ± 0.2 mm and single
glazing beadofappropriate dimension. (
867 Area of window upto 2.50 sqm).
Casement cum fixed panel window
having both end single
casement panel, middle fixed panels
and at top completely
fixed ventilator with S.S friction hinges
MAT-05445 BMT-P.78.B (350 x 19 x 1.9) madeof (big series)
7225
frame 67 x 60 mm , sash 67 x 80 mm Sqm
&mullion 67 x 80 mm all having wall
thickness of 2.3 ± 0.2 mmand single
glazing bead/double glazing bead of
appropriatedimension. (Area of window
868 above 3.00 sqm upto 5.00 sqm).
Providing and fixing factory made uPVC
MAT-05446 BMT-P.79 white colour fixed glazedwindows /
Ventilators comprising of uPVC multi-

152
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
chambered frame andmullion (where
ever required) extruded profiles duly
reinforced with 1.60± 0.2 mm thick
galvanized mild steel section made from
roll forming
process of required length (shape & size
according to uPVC profile),uPVC
extruded glazing beads of appropriate
dimension, EPDM gasket,G.I fasteners
100 x 8 mm size for fixing frame to
finished wall, plasticpackers, plastic
caps and necessary stainless steel
screws etc. Profile
of frame shall be mitred cut and fusion
welded at all corners, mullion
(ifrequired) shall be also fusion welded
including drilling of holes for
fixinghardware's and drainage of water
etc. After fixing frame the gap between
frame and adjacent finished wall shall
be filled with weather proof
siliconsealant over backer rod of
required size and of approved quality,
allcomplete as per approved drawing &
direction of Engineer-in-Charge
inclusive of cost of Single / double
glass panes and silicon sealant.
Note: For uPVC frame, sash and mullion
extruded profiles minus 5%tolerance in
dimension i.e. in depth & width of profile
shall be acceptable.Variation in profile
dimension in higher side shall be
acceptedbut no extra payment on this
account shall be made.
Fixed windows / Ventilators made of
(small series) frame 47 x 50mm &
BMT-P.79.A mullion 47 x 68 mm both having wall 1
869 thickness of 1.9 ±0.2 mm and single Sqm 6456
glazing bead of appropriate dimension.
Providing and fixing factory made uPVC
white colour sliding glazed
windowupto 1.50 m in height dimension
comprising of uPVC multi-
chamberedframe with in-built roller track
and sash extruded profiles duly
reinforced
with 1.60 ± 0.2 mm thick galvanized mild
steel section made from rollforming
process of required length (shape & size
870 BMT-P.80 according to uPVCprofile), appropriate
dimension of uPVC extruded glazing
beads anduPVC extruded interlocks,
EPDM gasket, wool pile, zinc alloy
(white

153
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
powder coated) touch locks with hook,
zinc alloy body with single nylonrollers
(weight bearing capacity to be 40 kg),
G.I fasteners 100 x 8 mmsize for fixing
frame to finished wall and necessary
stainless steel screwsetc. Profile of
frame & sash shall be mitred cut and
fusion welded at all
corners, including drilling of holes for
fixing hardware's and drainage ofwater
etc. After fixing frame the gap between
frame and adjacent finishedwall shall be
filled with weather proof silicon sealent
over backer rod ofrequired size and of
approved quality, all complete as per
approved drawing
& direction of Engineer-in-Charge
inclusive of cost of Single / double glass
panes, wire mesh and silicon sealent .
Note: For uPVC frame and sash
extruded profiles minus 5%
tolerancein dimension i.e. in depth &
width of profile shall be
acceptable.Variation in profile
dimension in higher side shall be
acceptedbut no extra payment on
this account shall be made.
Two track two panels sliding window
made of (small series)
frame 52 x 44 mm &sash 32 x 60 mm
871 both having 6698
wall thickness of 1.9 ± 0.2 mm and 1
MAT-05447 BMT-P.80.A single glazing bead of Sqm
appropriate dimension. (Area of window
upto 1.75 sqm)
Three track three panels sliding window
with fly proof SS
wire mesh (Two nos. glazed & one no.
wire mesh panels)
872 made of (small series) frame 92 x 44 9000
mm & sash 32 x 60 mmboth having wall 1
MAT-05448 BMT-P.80.B thickness of 1.9 ± 0.2 mm and single Sqm
glazingbead of appropriate dimension
(Area of window upto 1.75 sqm).
Two track two panels sliding window
made of (big series)
frame 67 x 50 mm & sash 46 x 62 mm
both having wall
873 thickness of 2.3 ± 0.2 mm and single 6960
glazing bead / double 1
MAT-05449 BMT-P.80.C glazing bead of appropriate dimension . Sqm
(Area of window
above 1.75 sqm

154
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
upto 2.50 sqm).
Providing and fixing factory made uPVC
white colour sliding glazed window
above 1.50 m in height dimension
comprising of uPVC multi-chambered
frame with in-built roller track and sash
extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild
steel section made from rollforming
process of required length (shape & size
according to uPVCprofile), appropriate
dimension of uPVC extruded glazing
beads, uPVCextruded interlocks and
uPVC extruded Inline sash adaptor (if
required),
EPDM gasket, wool pile, zinc alloy
(white powder coated) handle onone
side of extreme panel along with zinc
plated mild steel multi pointlocking
having transmission gear with keeps,
zinc alloy (white powdercoated) touch
lock with hook (if required for wire mesh
panel), stainlesssteel (SS 304 grade)
body with adjustable double nylon
rollers (weightbearing capacity to be 120
kg), G.I fasteners 100 x 8 mm size for
fixingframe to finished wall and
necessary stainless steel screws etc.
Profileof frame & sash shall be mitred
cut and fusion welded at all
corners,including drilling of holes for
fixing hardware's and drainage of water
etc.
After fixing frame the gap between
frame and adjacent finished wall shallbe
filled with weather proof silicon sealent
over backer rod of requiredsize and of
approved quality, all complete as per 1 7484
874 MAT-05450 BMT-P.81 approved drawing & Sqm
direction of Engineer-in-Charge
inclusive of cost of Single / double glass
panes, wire mesh and silicon sealent .
Two track two panels sliding window
made of (big series) frame 67 x 50 mm
& sash 46 x 62 mm both having wall
thickness of 2.3 ± 0.2 mm and single
glazing bead / double
glazing bead of appropriate dimension.
(Area of window above2.50 sqm upto
4.00 sqm.)
Note: For uPVC frame and sash
extruded profiles minus 5%
tolerancein dimension i.e. in depth &
width of profile shall be

155
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
acceptable.Variation in
profile dimension in higher
side shall beaccepted
but no extra payment on this
accountshall be made.
Double Skin powder coatedGI
openable/casement single rebate
Windows with 5mm thick
Polycarbonate sheet SIZE OF
WINDOW 1.50 M X 1.35M (three
openable shutters) Providing and
fixing of powder coated
Openable/Casement GI Window of
size 1.50mx1.35m (three openable
shutters). Window frame having two
horizontals & four verticals (Base
steel as per IS513 of 0.60mm thick
galvanized as per IS 277withZinc of
120 GSM), powder coated paint of
60-65microns(DFT) thick and
section for double Skin outer frame
of 80 mm x 65 mm x 0.6mm thick
including architrave of 20mm,centre
mullions of 80mm x 60mm x 0.6mm
thick and section for Double Skin
shutter of 52mm x25 mm x 0.6 mm
thick, outer frame and mullions to
have rebate for glazed shutter and
the sections cut to length metre
joined with corner bracket, center
mullion fixed with mullion cap,
12443
BMT-P.82 shutter with 5mmthick 1 Sqm
Polycarbonate Solid clear UV
resistant sheet of reputed make
( UV stabilized, transparent &
solid section ) with EPDM rubber
gaskets including fixing the frames
in concrete/masonry wall by means
of self-expanding screws, Including
10mm Square guard bars with
14Nos horizontals & two verticals,
beading section size of 9 x12mm to
be provided in shutter for
Polycarbonate sheet holding,
including infill material of
polyurethane foam (PUF) and all
fixers like 100mm long SS handle -3
Nos, 125mm long SS tower bolts-
6Nos, 75mm long SS ball bearing
butt Hinges-9Nos, 200mm long SS
latch type window stopper -3Nos (all
fixers should be stainless steel 304
grade) including all stiffeners
,supporting plates, SS 304 screws,
Nylon caps, EPDM rubber gasket
etc., complete for finished item of
work. and including cost &
conveyance of all materials and all
156
 labour charges like loading,
unloading, and fixing of powder
coated Galvanized Steel Window
etc., complete for finished item of
work. Window Frame: Frame
having four verticals & two
horizontals, alround frame section of
size;80mmx65mm x 0.6mm thick
including architrave of 20mm and
center mullions section of size;
80mmx60mm x0.6mm thick. (2Nos),
with single rebate. Shutters (3 Nos):
Shutter section of size 52mm x25
mm x 0.6 mm thick with 5mm thick
Polycarbonate Solid Clear UV
resistant sheet of reputed make (UV
stabilized, transparent & solid
section) Infill Material: polyurethane
foam (PUF) Grill : Grill having 14
Nos of 10mm sq rods (horizontals)
and 2Nos of 10mm Sq rods
(verticals), 10mm sq rods should be
inserted into outer frame & center
mullions as directed by the
Engineering in charge, Fixers:
100mm long SS handle -3 Nos,
125mm long SS tower bolts-6 Nos,
75mm long SS ball bearing butt
Hinges 9 Nos, 200mm long SS latch
type window stopper -3 Nos Note ;
all fixers should be stainless steel
304

Shall confirm to the BIS

codes: -IS 1038:1983: Steel
doors and windows, IS
4351:2003: Steel Door and
window shutters, IS
13871:1993: Powder coating,
IS 277: Galvanized Steel
Sheets, IS 513: Cold
reduced low carbon steel
sheets IS ; 1081: Fixing and
glazing of Steel Doors and
Windows, IS 14443 (1997):
Polycarbonate sheets and all
other relevant codes of BIS.
This Item shall carry a
warranty period of 5 (Five)
Years from the date of
supply and fixing.
III.SUB-
VENTILLATORS
SECTION

157
 Providing and fixing of top hung
Ventilators made of pre-painted
steel(Base steel as per IS 513 of
0.80 mm thick galvanized as per
IS 277 with Zinc of 120 GSM),
finish painted with a polyester
paint of 60-65 microns thick and
section for outer frame of 80 x 45
mm, centre mullion of 80 x 60
mm, section for shutter of 52 x 25
mm x 0.6 mm thick, outer frame
and mullions to have rebate for
glazed shutter with aprovision for
guard bars/grills and thesections
cut to length metre joined with
corner bracket, centre mullion
fixed with mullion cap, 1 No. of
High grade nylon latch handle,
window stopper, 2 nos. of with MS
Powder coated /SS ball bearing
butt Hinges provided per shutter
and windows fitted with 4 mm
thick plain float glass with rubber
gaskets including fixing the
frames in concrete/masonrywall
by means of self expanding
screws, Including 10 mm Square
guard bars with 6” (152.4mm)
pitch etc., complete for finished
item of work.
Single openable ventilator shutter
size of 2’ 0” x 2’ 0” (609.6 x
875 609.6mm) outer frame section 6690
MAT-01464 BMT-P.56 size of 80 x 45mm, shutter frame 1 sqm
section size of 52 x 25mm thick
Double openable ventilator shutter
Sizeof 4’ 0” x 2’ 0” (1219.2mm x
609.6mm)
876 outer frame section size of 80 x 6690
MAT-01465 BMT-P.57 45mm,shutter frame section size 1 sqm
of 52 x25mm, vertical mullion
section size of 80x 60 mm
Double openable fix shutter size
of 4’0” x 3’0” (1219.2mm x
914.4mm) outer frame section
877 size of 80 x 45mm , shutter frame 6690
MAT-01466 BMT-P.58 section size of 52 x 25mm 1 sqm
,Vertical mullion section size of 80
x60 mm

Single fixed Louvers Ventilator

878 size of 2’ 0” x 2’ 0” (609.6 x 4602
MAT-01467 BMT-P.59 609.6mm) outer frame box section 1 sqm
size of 80 x 45mm

Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5

158
 Double fixed Louvers ventilator
Size of 4’ 0” x 2’ 0” (1219.2mm x
609.6mm) 4602
879 MAT-01468 BMT-P.60 outer frame box section size of 80 1 sqm
x45mm, vertical mullion section
size of 80x 60 mm
Double fixed Louvers Ventilator
size of 4’0” x 3’0” (1219.2mm x
914.4mm) outerframe box section 4602
880 MAT-01469 BMT-P.61 size of 80 x 45mm , Vertical 1 sqm
mullion section size of 80 x 60
mm
Note: The above rates are for
normal finish, 10% extra may be
allowed forWood Grain finish
Providing and fixing of top hung
Ventilator with fly mesh made of
pre- painted steel (Base steel as
per IS 513 of 0.80 mm thick
galvanized as per IS
277 with Zinc of 120 GSM), finish
painted with a polyester paint of
60-65 microns thick and section
for outer frame of 100 x 45 mm,
centre mullion of 100 x 60 mm,
section for shutter of 52 x 25 mm
x 0.6 mm thick, section for fly-
shutter of 52 x 25 mm x 0.6 mm
thick and fitted with stainless steel
32 gauge fly mesh of 304 grade
with 144 holes per sq.inch and
mullions to have double rebate for
glazed shutter and fly-shutter with
a provision for guard bars/grills
and the sections cut to length
metre joined with corner bracket,
centre mullion fixed with mullion
cap, 1 No. of High grade nylon
latch handle, window stopper, 2
nos. of with MS Powder coated
/SS ball bearing butt Hinges
provided per shutter and windows
fitted with 4 mm thick plain float
glass with rubber gaskets
including fixing the frames in
concrete/masonry wall by means
of self expandingscrews,
Including 10 mm Square guard
bars with 6” (152.4mm) pitch etc.,
complete for finished item of work.
Single openable ventilator shutter
window size of 2’ 0” x 2’ 0” (609.6
x 609.6mm) outer frame section
size of 8246
881 MAT-01470 BMT-P.62 100 x 45mm, Glazed and flymesh 1 sqm
shutter frame section size of 52 x
25mmthick
Double openable ventilator shutter
window Size of 4’ 0” x 2’ 0”
(1219.2mmx 609.6mm) outer 8246
882 MAT-01471 BMT-P.63 frame section size of 1 sqm
100 x 45mm, Glazed and
flymesh
159
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
shutter frame section size of 52 x
25mm, vertical mullion section size of
100 x 60 mm
Double openable fix shutter window size
of 4’0” x 3’0” (1219.2mm x 914.4mm)
883 outer frame section size 100 x 45mm , 7635
MAT-01472 BMT-P.64 Glazed and flymesh shutter frame 1 sqm
section size 52 x 25 mm ,Vertical
mullion section size of 100 x 60 mm
Single fixed Louvers Ventilator window
size of 2’ 0” x 2’ 0” (609.6 x 609.6mm)
884 outer frame box section size of 100 x 5504
MAT-01473 BMT-P.65 45mm, flymesh shutter frame section 1 sqm
size 52 x 25 mm
Double fixed Louvers ventilator window
Size of 4’ 0” x 2’ 0” (1219.2mm x
885 609.6mm) outer frame box section size 5504
MAT-01474 BMT-P.66 of 100 x 45mm, flymesh shutter frame 1 sqm
section size 52 x 25 mm, vertical mullion
section size of 100 x 60 mm
Double fixed Louvers Ventilator window
size of 4’0” x 3’0” (1219.2mm x
886 914.4mm) outer frame box section size 5504
MAT-01475 BMT-P.67 100 x 45mm , flymesh shutter frame 1 sqm
section size 52 x 25 mm Vertical mullion
section size of 100 x 60 mm
Note: The above rates are for normal
finish, 10% extra may be allowed for
Wood Grain finish
Supplying and fixing of Top Hung
Ventilators made of pre - painted steel
(base steel as per IS 513 of -0.58 mm
thick 'D" quality, galvanized as per IS
277 with zinc of 120 GSM) primer
coated with epoxy primer of 5-7 microns
thick, finish painted with a polyester
paint of 12-16 microns thick and back
coated with 5-7 microns thick alkyd
backer, section for outer frame of 46 x
52 mm section and for shutter of 46 x 46
mm section for mullion 46 x 70 mm,
The Ventilator to be panelled 4 mm
pinhead glass with Ethyl propylene
Diamine monomer Gasket (EPDM) and
the sections cut to length mitre joined
with corner brocket mullions fixed using
mullion cap and with handle made of
high grade aluminium powder coated
and nylon receiver, corner brackets
made of CRCA with Zinc Phosphate,
Mullion caps made of glass filled nylon,
frames fixed to the concrete /masonry

160
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
wall by means of self expanding screws
including 10 mm square guard bars with
6" pitch complete for finished item of
work.
Ventilators: Top Hung 2 '-0" x 2'-0"
887 (609.6x609.6mm) outer frame section 1 7747
MAT-01418 BMT-P.10 size of 46mm x 52 mm shutter frame Sqm
section size of 46mm x 46 mm
Ventilators: Top Hung 4 '-0" x 2'-0"
(1219.2x609.6mm) outer frame section
888 size of 46 x 52 m shutter frame section 1 7747
MAT-01419 BMT-P.11 size of 46 x 46 mm Mullion section size Sqm
of 46 x 70 mm
Ventilators: Top Hung 4'-0"x 3'-0"
(1219.2x914.4mm) outer frame section
889 size of 46 x 52m m shutter frame 1 7747
MAT-01420 BMT-P.12 section size of 46 x 46 mm Mullion Sqm
section size of 46 x 70 mm
Supplying and fixing of Fixed Louvered
Ventilators made of pre - painted steel
(base steel as per IS 513 of -0.58 mm
thick 'D" quality, galvanized as per IS
277 with zinc of 120 GSM) primer
coated with epoxy primer of 5-7 microns
thick, finish painted with a polyester
paint of 12-16 microns thick and back
coated with 5-7 microns thick alkyd
backer, The section for louvered
ventilators should be of of 33 x 56 mm
Box section paneled with 4 mm pinhead
glass with Ethyl propylene Diamine
monomer Gasket (EPDM) and the
sections cut to length mitre joined with
corner bracket . corner brackets made
of CRCA with Zinc Phosphate. The
frames to be fixed to the concrete
/masonry wall by means of self
expanding screws including 10 mm
square guard bars with 6" pitch
complete for finished item of work.
Ventilators: Fixed louvers 2'-0" x 2'-0"
890 (609.6x609.6mm)(Box section) outer 1 5115
MAT-01421 BMT-P.13 Sqm
frame section size of 33 x 56 mm
Ventilators: Fixed louvers 4'-0" x 2'-0"
891 (1219.2 x 609.6 mm) (Box section) outer 1 5115
MAT-01422 BMT-P.14 frame section size of 33 x 56 mm Sqm
Mullion section size of 33 x 56 mm
Ventilators: Fixed louvers 4'-0" x 3'-0"
892 (1219.2 x 914.4 mm) (Box section) outer 1 5115
MAT-01423 BMT-P.15 frame section size of 33 x 56 mm Sqm
Mullion section size of 33 x 56 mm

161
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
865 to BMT-P.68 to
ITEMS DELETED
868 P.75

Providing and fixing 3 Track 3 Shutter

Pre painted Steel sliding Window/Door
fabricated from roll formed sections
made of Galvanized steel colour coated
/powder coated (Base Steel as per IS
513 ‘D’ quality galvanized as per IS 277
with Zinc of 120 Gms./ Sq.mtr) with total
coated thickness of 0.58mm. Primer
Coat with epoxy primer of 5-7 microns
thick, finished paint with a polyester
paint of 12-16 microns thick and back
coated with Alkyd backer of 5-7 microns
or powder coated with pure polyester
powder up to 50-60 microns thick. The
External Section for Three Track Three
Sliding Shutter should be of 44 x
107mm with a provision for bottom track
insert profile of 10x9 mm made of
aluminium. Section for Window glass
shutter should be of 35x49mm, Section
for Window Euro groove should be of
25x24mm made of plastic to
accommodate standard accessories,
and section for window lap strip should
be of 21x4mm made of plastic. Section
for Mesh Shutter should be of
35x49mm. Section for Door shutter
should be of 35x67mm, Section for Door
Euro Groove 25x31mm made of plastic
to accommodate standard accessories
and size of lap strip should be of
39x41mm. The Window/Door to be
panelled with 5mm thick plain float
glass. The gaskets are to be made of
Ethyl Propylene Diamine Manomer
[EPDM]. Corner Brackets for internal
and external frame to be made of glass 1 8253
893 MAT-01488 BMT-P.77 Sqm
filled nylon. Touch lock to be provided
for Window Shutter. Sections are to be
cut to length, joined and assembled by
means of corner brackets. The above
frame to be fixed to Brick/Concrete
masonry by using Nylon self-expanding
caps and driving MS electroplated
80mm screws into the caps through
frames. The Grill for safety for windows
to be made of 10mm thick square rod
bars with 152mm pitch for complete item
of work . For Door there will be no
Safety Grill including cost and
conveyance of all materials,
accessories, labour charges for

162
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
transportation, erection at site complete
for finished item of work.
Q.SECTION STRUCTURAL GLAZING
I.SUB-
FIXED GLAZING
SECTION
894 MAT-01496 BMT-Q.08 ITEM DELETED
895 MAT-01497 BMT-Q.09 ITEM DELETED

II.SUB- SECTION STRUCTURAL GLAZING

Providing and fixing Structural Glazing

fabricated from Roll formed sections
made of Pre-painted Steel / Powder
coated (Base steel as per IS 513 of ‘D’
quality, galvanized as per IS 277 with
Zinc of 120 Gm/Sqm) with total coated
thickness of 0.72 mm and the glass
holding section made of 304 grade
stainless steel of 0.58 mm thick
galvanised steel section as stiffeners
inside the colour coated steel powder
coated sections as per the design
requirement & calculations to suit wind
pressures as given in IS: 875, the primer
coat with epoxy primer of 5 – 7 microns
thick, finish painted with a polyester
paint of 12-16 microns thick and back
coated with Alkyd backer of 5-7 microns
or powder coated with pure polyester
powder up to 50-60 microns thick and
the vertical section of 50 mm x 99 mm x
0.72 mm, 33 mm x 56 mm x 0.72 mm
for frame horizontal section, stiffener
section of 47 mm x 97 mm x 1 mm,
cover profiles sections of 20 mm x 58
mm x 0.58 mm, glass holding section of
37 mm x 37 mm & 37 mm x 18 mm
including fixing 5mm thick Ocean Blue 7789
reflective glass, brackets made of CRCA 1
896 MAT-01489 BMT-Q.01 powder coated/Electroplated to connect Sqm
vertical to horizontal, vertical to slab, to
fix verticals at top & bottom as per site
requirement and gasket made of Ethyl
Propylene Diamine Monomer, U.V.
resistant silicon sealant including fixing
in concrete/masonry wall with self-
expanding cap & screws inclusive of
cost and conveyance of all materials to
site, all labour charges, incidental
charges, cost of all consumables etc.
and fixing charges complete for finished
item of work.

163
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Providing and fixing Top Hung shutters
in Structural Glazing fabricated from
Roll formed sections made of Pre-
painted Steel / Powder coated (Base
steel as per IS 513 of ‘D’ quality,
galvanized as per IS 277 with Zinc of
120 Gm/Sqm) with total coated
thickness of 0.72 mm and the glass
holding section made of 304 grade
stainless steel of 0.58 mm thick, duly
providing stiffeners inside the colour
coated steel/powder coated sections as
per the design requirement, calculations
to suit wind pressures as given in IS 875
and primer coat with epoxy primer of 5-7
microns thick and back coated with
Alkyd backer of 5-7 microns or powder
coated with pure polyester powder up to
50-60 microns thick and the outer frame
6230
of 20 mm x 58 mm x 0.58 mm, shutter
sections of 57 mm x 33 mm x 0.72 mm, 1
897 MAT-01490 BMT-Q.02 stiffener sections of 55 mm x 31 mm x Sqm
1mm, hinges – 2 Nos for each shutter
and aluminium Stays – 2 Nos. for each
shutter, aluminium Handle – 1 no. for
each shutter including cost and
conveyance of all materials to site, all
labour charges, incidental charges, cost
of all consumables etc. and fixing
charges etc for finished item of work
III SUB- SECTION CURTAIN WALLING
Supplying and fixing of curtain Glazing
made of pre painted steel (base steel as
per IS 513 of 0.58 mm thick D quality,
galvanized as per IS 277 with Zinc of
120 GSM) Primer coated with epoxy
primer of 5-7 microns thick, finish
painted with a polyester paint of 12- 16
microns thick and back coated with 5-7
microns thick alkyd backer using the
section for outer frame of 46 x 52 mm,
section for mullion of 46 x 70 mm and
section for beading of 18 x 25 mm and
the glazing with 5 mm thick plain float
glass fitted with Ethyl Propylene
diameine Monomer (EPDM) gaskets 6470
and the sections cut to length, mitre 1
898 MAT-01491 BMT-Q.03 joined with corner bracket, centre Sqm
mullions fixed suing mullion cap inluding
handle made of high grade Aluminium
powder coated and nylon receiver,
corner brackets made of CRCA with
zinc phosphating, mullion caps made of
Glass filled nylon including fixing the

164
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
frames in the concrete / masonry wall
with self expanding screws, etc.,
complete for finished item.- Fixed
Glazing 2'-0" x 2'-0" (609.6x609.6mm)
grid outer frames section size of 46 x 52
mm
Mullion section size of 46 x 70mm
Beading section size of 18 x 25 mm -
903 Fixed Glazing 2'-0" x 3'-0" 1 6230
MAT-01492 BMT-Q.04 (609.6x914.4mm) grid outer frame Sqm
section size of 46 x 52 mm
Mullion section size of 46 x 70mm
Beading section size of 18 x 25 mm
904 Fixed Glazing 3'-0" x 3'-0" 1 5061
MAT-01493 BMT-Q.05 (914.4x914.4mm) grid outer frame Sqm
section size of 46 x 52 mm
Mullion section size of 46 x 70mm
Beading section size of 18 x 25 mm
905 Fixed Glazing 3'-0" x 4'-0" 1 5061
MAT-01494 BMT-Q.06 (914.4x1219.2mm) grid outer frame Sqm
section size of 46 x 52 mm
906 MAT-01495 BMT-Q.07 ITEM DELETED

DISMANTLING clearing away and carefully

S.SECTION stacking materials useful for reuse.
1
908 MAT-01498 BMT-S.01 Stone masonry in cement mortar 568
Cum
10
909 MAT-01499 BMT-S.02 Terracing work in roofs or floors 240
Sqm
Flat stones in roof or floors including 10
910 MAT-01500 BMT-S.03 lifting Sqm 208

Pan tiled or Mangalore tiled roof without 10

911 MAT-01501 BMT-S.04 roof timbers. Sqm 173

Flat and pan tiles or Mangalore tiles 10

912 MAT-01502 BMT-S.05 over flat tiles without roof timbers Sqm 208

Wrought and framed timber in roofs or 1

913 MAT-01503 BMT-S.06 floors Cum 300

10
914 MAT-01504 BMT-S.07 Old lime mortar plaster 69
Sqm
10
915 MAT-01505 BMT-S.08 Old cement mortar plaster 85
Sqm
Dry rough stone revetment for aprons 1
916 MAT-01506 BMT-S.09 and stacking within 40 M lead Cum 103

Revetment for aprons and stacking 1

917 MAT-01507 BMT-S.10 grouted within 40 lead Cum 75

918 MAT-01508 BMT-S.11 Kadapa slabs or Shahabad stone slabs 10 96

165
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
flooring on sand bed Sqm
Through scraping of old plastered 10
919 MAT-01509 BMT-S.12 surface Sqm 62

Washing of plastered surface with soap,

soda and water (or with soda lime and 10 20
920 MAT-01510 BMT-S.13 Sqm
water)
clean removal of lime plaster from walls
and raking out joints 20mm deep or from 10 62
921 MAT-01511 BMT-S.14 terraced roof and raking out joints 100 Sqm
mm deep
Clean removal of cement plaster from 10
922 MAT-01512 BMT-S.15 walls and raking out joint 200 mm deep Sqm 77

T.SECTION READY MIX CONCRETE DELETED

U.SECTION EXPANSION JOINT FILLERS

Supply of high performance expansion
923 joint filler board conforming to M.O.S.T 1 542
MAT-01513 BMT-U.01 Sqm
- 18 mm THICK
Supply of high performance expansion
924 joint filler board conforming to M.O.S.T 1 546
MAT-01514 BMT-U.02 Sqm
- 20 mm THICK
Supply of high performance expansion
925 joint filler board conforming to M.O.S.T 1 760
MAT-01515 BMT-U.03 Sqm
- 25 mm THICK
Supply of expansion joint filler board for
926 buildings, columns, beams and slabs 1 374
MAT-01516 BMT-U.04 Sqm
20 mm THICK
Supply of expansion joint filler board for
927 buildings, columns, beams and slabs 1 478
MAT-01517 BMT-U.05 Sqm
25 mm THICK
Supply of expansion joint filler board for
928 buildings, columns, beams and slabs 50 1 893
MAT-01518 BMT-U.06 Sqm
mm THICK
Supply of back up to cold applied
929 sealant in construction and longitudinal 21
MAT-01519 BMT-U.07 1 RM
joint - 10 mm OD
Supply of back up to cold applied
930 sealant in construction and longitudinal 21
MAT-01520 BMT-U.08 1 RM
joint - 12 mm OD
Supply of back up to cold applied
931 sealant in construction and longitudinal 22
MAT-01521 BMT-U.09 1 RM
joint - 15 mm OD
Supply of back up to cold applied
932 sealant in construction and longitudinal 24
MAT-01522 BMT-U.10 1 RM
joint - 20 mm OD
Supply of back up to cold applied
933 MAT-01523 BMT-U.11 sealant in construction and longitudinal 1 RM 28

166
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
joint - 25 mm OD

V.SECTION LABOUR CHARGES

Bailing out water for earth work
excavation /concrete for foundation
934 below water level. (For building items 311
MAT-01524 BMM-V.01 only) - Other than sandy soil - 0.0 M to 1 cum
1.0 M
Bailing out water for earth work
excavation /concrete for foundation
935 below water level. (For building items 367
MAT-01525 BMM-V.02 only) - Other than sandy soil - 1.0 M to 1 cum
2.0 M
Bailing out water for earth work
excavation /concrete for foundation
936 below water level. (For building items 428
MAT-01526 BMM-V.03 only) - Other than sandy soil - 2.0 M to 1 cum
3.0 M
Bailing out water for earth work
937 excavation / for concrete foundation 493
MAT-01527 BMM-V.04 below water level. (For building items 1 cum
only) Sandy soil - 0.0 M to 1.0 M
Bailing out water for earth work
938 excavation /for concrete foundation 765
MAT-01528 BMM-V.05 below water level. (For building items 1 cum
only) Sandy soil - 1.0 M to 2.0 M
Bailing out water for earth work
939 excavation /concrete for foundation 924
MAT-01529 BMM-V.06 below water level. (For building items 1 cum
only) Sandy soil - 2.0 M to 3.0 M
Labour charges for making, fabricating
office furniture, racks, work-station
furniture, cup-board shutters with ply-
wood/ MDF sheets, decolam/ veneer
940 laminations including fixing cutting, 776
making, assembling, fixing hinges, fixing
fixtures, fixing locks, pasting sheets/ 1
LAB-00418 BMM-V.07 Sqm
laminations fixing in position with
necessary screws excluding cost of
materials, accessories, fittings
Labour charges for making, fabricating
kitchen furniture, cup-boards with
shutters, box cup-boards, box racks,
with ply-wood/ MDF sheets, decolam/
veneer laminations including fixing
941 cutting, making, assembling, fixing 1185
hinges, fixing fixtures, fixing locks, 1
LAB-00419 BMM-V.08 pasting sheets/ laminations fixing in Sqm
position with necessary screws
excluding cost of materials, accessories,
fittings

167
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
Rounding the edges of Kadapa /
942 Shahabad stone slabs of any thickness 135
LAB-00503 BMM-V.09 1 Rm
including polishing the same
Half Rounding the edges of Marble/
943 Granite stone slabs of all thicknesses 408
LAB-00504 BMM-V.10 1 Rm
including polishing the same.
Full Rounding the edges of Marble/
944 Granite stone slabs of all thicknesses 529
LAB-00505 BMM-V.11 1 Rm
including polishing the same.
Machine Cutting charges - for Marble/
945 Granite slabs up to 50 mm thick by 22
LAB-00506 BMM-V.12 1 RM
mechanical device.
Flat nosing to Kadapa/ Shahabad stone
946 LAB-00507 BMM-V.13 slabs of any thick 1 Rm 65

Labour charges for fabricating steel

works like Window Grills, Compound
947 Wall Grills, Iron Doors, Windows 35
LAB-00420 BMM-V.14 including cost of welding rods, power 1 Kg
charges, excluding cost of fixing in
position
Labour charges for fixing Iron Doors,
948 Iron Windows and Window Grills in 6
LAB-00421 BMM-V.15 1 Kg
position
Labour charges for fabricating all heavy
steel works like Trusses, Stanchions,
949 Heavy Beams and Girders including 31
LAB-00422 BMM-V.16 cost of welding rods, power charges, etc 1 Kg
excluding cost of fixing in position
Labour charges for fixing heavy iron
grills, Trusses, Stanchions, Heavy
950 Beams and Girders erecting in position 26
LAB-00423 BMM-V.17 and fixing by using chain pulley blocks, 1 Kg
Derek pole arrangements and cranes
etc., complete in position
Labour charges for Fabrication of
stainless steel railing works using
951 stainless steel welding rods including 169
LAB-00424 BMM-V.18 buffing, polishing, lacquer finishing, to 1 Kg
present seamless finish
Labour charges for Fabrication of
stainless steel sheet cladding works
952 using stainless steel welding rods 2252
LAB-00425 BMM-V.19 including buffing, polishing, lacquer 1 sqm
finishing, to present seamless finish
Labour charges for Glass designing
953 works on any thickness of Glass 1 1225
LAB-00426 BMM-V.20 Sqm
including fixing at site - Etching works
954 LAB-00427 BMM-V.21 Labour charges for Glass designing 1

168
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)
1 2 3 4 5
works on any thickness of Glass Sqm
including fixing at site - Reverse Etching 1516
work
Labour charges for Glass designing
LAB-00428 BMM-V.22 1
works on any thickness of Glass 1894
Sqm
955 including fixing at site - Acid wash works
Labour charges for fixing Flush door
shutters of any thickness to the existing 1
LAB-00429 BMM-V.23 door frame including fixing the fixtures to Sqm 491
the door shutter excluding cost of
956 shutter
Labour charges for fixing glass panes of
LAB-00430 BMM-V.24 any thickness to the existing door / 1
367
window panes including fixing the Sqm
957 beading excluding cost of beading
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00431 BMM-V.25 ventilators including fixing all necessary 1 sqm 2014
fixtures etc. for Teak wood Fully
panelled doors external or internal
958 including frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00432 BMM-V.26 ventilators including fixing all necessary 1 sqm 1903
fixtures etc. for Teak wood Glazed and
panelled doors including fixing glass
959 including frame
Labour charges for wrought and put up
including fixing in position frames of any
LAB-00433 BMM-V.27 size, shutters for doors, windows, 1 sqm
1669
ventilators including fixing all necessary
fixtures etc. for Teak wood Framed and
960 planked doors including frame
charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00434 BMM-V.28 ventilators including fixing all necessary 1 sqm 1318
fixtures etc. for Teak wood Ledged,
braced and planked doors including
961 frame
Labour charges for wrought and put up
including fixing in position frames of any
LAB-00435 BMM-V.29 size, shutters for doors, windows, 1 sqm
1007
ventilators including fixing all necessary
fixtures etc. for Teak wood Flush type
962 door shutter including frame
Labour charges for wrought and put up
LAB-00436 BMM-V.30 1 sqm 1289
963 including fixing in position frames of any

169
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)
1 2 3 4 5
size, shutters for doors, windows,
ventilators including fixing all necessary
fixtures etc. for Teak wood Windows
glazed including outer frame and shutter
frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00437 BMM-V.31 ventilators including fixing all necessary 1 sqm 1943
fixtures etc. for Teak wood Windows
panelled including outer frame and
964 shutter frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00438 BMM-V.32 ventilators including fixing all necessary 1 sqm 1326
fixtures etc. for Teak wood Windows
ledged, braced and planked including
965 outer frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00439 BMM-V.33 ventilators including fixing all necessary 1 sqm 1587
fixtures etc. for Teak wood Windows
framed and planked including outer
966 frame and shutter frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00440 BMM-V.34 ventilators including fixing all necessary 1 sqm 1068
fixtures etc. for Teak wood Ventilators
glazed, fixed with double frame with wire
967 netting including frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00441 BMM-V.35 ventilators including fixing all necessary 1 sqm 1350
fixtures etc. for Teak wood Swing
ventilators glazed including outer frame
968 and shutter frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00442 BMM-V.36 ventilators including fixing all necessary 1 sqm 807
fixtures etc. for Teak wood Weld mesh
doors and windows including outer
969 frame and shutter frame
Labour charges for wrought and put up
LAB-00443 BMM-V.37 including fixing in position frames of any 1 sqm
884
size, shutters for doors, windows,
970 ventilators including fixing all necessary

170
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)
1 2 3 4 5
fixtures etc. for Teak wood G.I or .AC
sheet door & windows including outer
frame and shutter frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00444 BMM-V.38 ventilators including fixing all necessary 1 sqm 1983
fixtures etc. for Other than teakwood
Fully panelled doors external or internal
971 including frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00445 BMM-V.39 ventilators including fixing all necessary 1 sqm 1862
fixtures etc. for Other than teakwood
Glazed and panelled doors including
972 fixing glass including frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00446 BMM-V.40 ventilators including fixing all necessary 1 sqm 1779
fixtures etc. for Other than teakwood
Framed and planked doors including
973 frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00447 BMM-V.41 ventilators including fixing all necessary 1 sqm 1544
fixtures etc. for Other than teakwood
Ledged, braced and planked doors
974 including frame
Labour charges for wrought and put up
including fixing in position frames of any
LAB-00448 BMM-V.42 size, shutters for doors, windows, 1 sqm
1208
ventilators including fixing all necessary
fixtures etc. for Other than teakwood
975 Flush type door shutter including frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00449 BMM-V.43 ventilators including fixing all necessary 1 sqm 967
fixtures etc. for Other than teakwood
Windows glazed including outer frame
976 and shutter frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00450 BMM-V.44 ventilators including fixing all necessary 1 sqm 1205
fixtures etc. for Other than teakwood
Windows panelled including outer frame
977 and shutter frame

171
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)
1 2 3 4 5
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00451 BMM-V.45 ventilators including fixing all necessary 1 sqm 1796
fixtures etc. for Other than teakwood
Windows ledged, braced and planked
978 including outer frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00452 BMM-V.46 ventilators including fixing all necessary 1 sqm 1227
fixtures etc. for Other than teakwood
Windows framed and planked including
979 outer frame and shutter frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00453 BMM-V.47 ventilators including fixing all necessary 1 sqm 1466
fixtures etc. for Other than teakwood
Ventilators glazed, fixed with double
980 frame with wire netting including frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00454 BMM-V.48 ventilators including fixing all necessary 1 sqm 1039
fixtures etc. for Other than teakwood
Swing ventilators glazed including outer
981 frame and shutter frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00455 BMM-V.49 ventilators including fixing all necessary 1 sqm 1298
fixtures etc. for Other than teakwood
Weld mesh doors and windows
982 including outer frame and shutter frame
Labour charges for wrought and put up
including fixing in position frames of any
size, shutters for doors, windows,
LAB-00456 BMM-V.50 ventilators including fixing all necessary 1 sqm 298
fixtures etc. for Other than teakwood G.I
or .AC sheet door & windows including
983 outer frame and shutter frame

984 LAB-00508 BMM-V.51 Grooves 2-3 mm 1 Rm 74

W.SECTION MISCELLANEOUS ITEMS

Supplying Aluminium anodised Sections
986 MAT-01575 BMS-W.01 for Doors, partitions, windows, 1 Kg 350
Ventilators (including annodization cost)
Sun Control film to the glazed windows
987 MAT-01576 BMS-W.02 1 sqm 357
partition including labour charges.

172
 CFMS code Basic
S. No Item Code Description of item Unit Rate for
SoR 2024-
25 (Rs.)
1 2 3 4 5
Aluminium Venetian Blinds horizontal
MAT-01577 BMS-W.03 1 sqm 912
987 25.4 mm wide with all accessories.
Aluminium Venetian Blinds horizontal
MAT-01578 BMS-W.04 1 sqm 868
988 20.0 mm wide with all accessories.
Venetian blinds Vertical blinds 100 mm
MAT-01579 BMS-W.05 1 sqm 1474
989 wide with all accessories.

990 MAT-01580 BMS-W.06 Rubber Beading 1 RM 2

Chlorpyriphos/ Lindane emulsifiable
MAT-01581 BMS-W.09 1 Litre 248
991 concentrate of 20%

992 MAT-01582 BMS-W.10 Soft Brush Each 161

993 MAT-01583 BMS-W.11 Wire Brush Each 35
Supplying and fixing aluminium
composite cladding with skin
material 0.25 mm thick aluminium
sheet cover material natural
polyethylene aluminium cladding panel
fixed with extruded aluminium basis
frame (50x25x1.5mm) angle cleats, 1
MAT-01584 BMS-W.12
weather sealants, rivets, GI brackets all Sqm
as approved, using suitable bolts on 2501
structural steel work including necessary
accessories complete in all respects
including all scaffolding and labour
charges etc., complete for finished item
of work but excluding cost of structural
steel fabrication, if any, ACP Cladding -
994 3 mm thk
Supplying and fixing aluminium
composite cladding with skin
material 0.25 mm thick aluminium
sheet cover material natural
polyethylene aluminium cladding panel
fixed with extruded aluminium basis
frame (50x25x1.5mm) angle cleats, 1
MAT-01585 BMS-W.13
weather sealants, rivets, GI brackets all Sqm
as approved, using suitable bolts on 2728
structural steel work including necessary
accessories complete in all respects
including all scaffolding and labour
charges etc., complete for finished item
of work but excluding cost of structural
steel fabrication, if any, ACP Cladding -
995 4 mm thk
Supplying and fixing aluminium
composite cladding with skin
material 0.5 mm thick aluminium 1
MAT-01586 BMS-W.14 sheet cover material natural Sqm 3060
polyethylene aluminium cladding panel
fixed with extruded aluminium basis
996 frame (50x25x1.5mm) angle cleats,

173
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
weather sealants, rivets, GI brackets all
as approved, using suitable bolts on
structural steel work including necessary
accessories complete in all respects
including all scaffolding and labour
charges etc., complete for finished item
of work but excluding cost of structural
steel fabrication, if any, ACP Cladding -
4 mm thk
997 MAT-01587 BMS-W.15 CEMENT JALI - 25 mm thick 1 sqm 226
998 MAT-01588 BMS-W.16 CEMENT JALI - 40 mm thick 1 sqm 294
999 MAT-01589 BMS-W.17 CEMENT JALI - 50 mm thick 1 sqm 403
1
1000 MAT-01590 BMS-W.18 Aluminium sheet 24 Gauge 293
Sqm
7.5mm thick Aluminium Grill (as
1001 approved by the department) 3.58 1 1075
MAT-01591 BMS-W.19 Sqm
Kg/Sqm.
Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1
1002 MAT-01592 BMS-W.20 1" (25.4 mm ) thick Sqm 959

Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1

1003 MAT-01593 BMS-W.21 1/2" (12.7 mm ) thick Sqm 549

Supply of hot pressed compression

moulded sign plates for making road
1004 signs ass per the approved dimensions
of National Highway Authority Of India,
complete, for finished item of work.
1005 MAT-01594 BMS-W.22 Circular sign plate Dia 400mm. Each. 558
1006 MAT-01595 BMS-W.23 Circular sign plate Dia 600mm. Each. 1467
1007 MAT-01596 BMS-W.24 Circular sing plate Dia 870mm Each. 2941
1008 MAT-01597 BMS-W.25 Triangular sign plate 600mm. Each. 753
1009 MAT-01598 BMS-W.26 Triangular sign plate 900mm. Each. 1701
1010 MAT-01599 BMS-W.27 Square sign plate 600mm. Each. 1364
1011 MAT-01600 BMS-W.28 Square sign plate 1000mm. Each. 5065
1012 MAT-01601 BMS-W.29 ITEM DELETED
Design, fabrication & supply of light
weight pre engineered buildings for a
maximum span of 9 metres with 50 x 50
x 2.8 mm M.S hollow square tubes for
columns, trusses & purlins walls with
sandwich panels made up of 2 Nos
10mm thick cement bonded particle/
fibre boards with 25mm thick 12 kg/cum
density expanded polystyrene in
between encased in 1.25 mm thick
24x7x26 mm ‘W’ tracks in bottom & top
and ‘H’ section for sides with doors,

174
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.).)
1 2 3 4 5
windows & ventilators, roofing with 26
gauge pre painted profiled sheets fixed
with self tapping/ drilling screws,
painting with enamel paint for steel
items, OBD for interiors and ace for
exteriors & providing base plates,
templates & anchor bolts along with civil
foundation designs & drawings for the
finished item of work
Steel Structure: - Structure is made up
1013 of 50x50X 2.8 mm/33x66x2.8mm thick 414
MAT-01602 BMS-W.30 hollow M.S. sections for Trusses, 1 RM
columns, and purloins. - Columns
Sandwich panels: Sandwich panels of
50 mm thick with 25 mm thermocol of 12
kg / cum, fixed in between 2 Nos 10 mm
1014 cement bonded wood particle / fibre 1499
1
MAT-01603 BMS-W.33 boards properly fixed together with 30 Sqm
mmx30mmx30mm wood pieces along
width & length wherever necessary
U' Tracks & 'H' Section:- Bottom & Top
1015 'U' Tracks are made of 1.25 mm thick 161
MAT-01604 BMS-W.34 120 GSM G.I. Sheet of size 24x51x26 1 RM
mm size.
Fabricated 'H' sections are made up of 2
Nos 1.25 mm thick C.R. Of 40 mm width
1016 for flanges and 1 Nos of 2 mm thick 233
MAT-01605 BMS-W.35 C.R. of 50 mm width plate for web. will 1 RM
be used
Sandwich Panel joinery is made up of
couplers or equivalent made from 0.6
1017 mm G.I. roll formed section to hold 2 266
MAT-01606 BMS-W.36 Nos of 10 mm board on both sides with 1RM
25 mm thermocol in between.
Window:- windows are made up of 51
x51 mm step 'U' section made from 1.25
thick MS Cold rolled Steel Sheet and
Windows Shutters & Grill are made of
1018 48x25mm mm size pre painted section 4811
with 4 mm glass complete with 1
MAT-01607 BMS-W.37 necessary hardware. Grills are made Sqm
from 8 mm square rod at 100 mm
spacing.
Door Frames :-51 X 51 Stepped ' U'
section made from 1.25 mm thick C.R.
section with a 32 mm rebate for 30 mm
1019 flush door and Door Shutters with 30 4385
1
MAT-01608 BMS-W.38 mm thick block board / flush doors with Sqm
boiling water proof plywood complete
with necessary Hard ware.
1020 MAT-01609 BMS-W.39 Ventilators:- Ventilators are made of 1

175
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
51x51 mm step 'U' section made From
1.25 mm thick C.R. sheet with fixed Sqm 4906
louvers and glass.
Painting:-1) Steel structure is to be
1021 painted with 2 coats of Grade I enamel 1 130
MAT-01610 BMS-W.40 Sqm
paint.
2) Exterior walls are painted with one
1022 coast of primer and 2 coats of exterior 1 116
MAT-01611 BMS-W.41 Sqm
emulsion paint .
3) Interiors are painted with 1+2 coat of 1
1023 MAT-01612 BMS-W.42 O.B.D. Sqm 98

Toilets: - Toilets are provided as per

plan with a provision for fixing the wash
1024 basin, W.C. etc only is made with M.S. 1140
MAT-01613 BMS-W.43 steel section secured to the walls with Each
toilet bracket provision excluding cost of
WC/ Wash basin etc
Sun shades: - Sun shades will be
provided wherever necessary with 300
mm more than the width of window.
1025 25x25 mm angle frame to cover 450 mm 3843
in the front and the sides. 10mm cement
MAT-01614 BMS-W.44 bonded particle board will be fixed on Each
the frame work and sealed with green
paste or equivalent.
Roofing: - Roofing will be provided with
0.5mm thick galvanized / pre painted
G.I. profiled sheets fixed to the purlins
with 14 size self drilling screws with
1026 neoprene washer. Side laps are stitched 868
with self tapping / drilling screws. End 1
MAT-01615 BMS-W.45 laps are to be sealed with 25x3 mm Sqm
Butyl tape. The sheets are provided with
anti capillary grove.
1027 MAT-01617 BMS-W.47 Preparing gabions with jungle wood Each 3
1028 MAT-01618 BMS-W.48 Planting plants Each 2
1029 MAT-01619 BMS-W.49 Pruning plants Each 3
Maintaining avenues including fencing,
1030 weeding, mulching, watering etc per 8
MAT-01620 BMS-W.50 Each
plant.
- do - When scattered in hot weather
1031 with extra conveyance from March to 9
MAT-01621 BMS-W.51 Each
June
1032 MAT-01622 BMS-W.52 Hoisting or lowering of slab 1 cum 135
Dressing faces of granite stone (double 1
1033 MAT-01623 BMS-W.53 line dressing) Sqm 221

1034 MAT-01624 BMS-W.54 Dressing faces of other than granite 1 138

176
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
stone(double line dressing) Sqm
Supply of Pre-painted Galvalume
Trapezoidal Profile Roofing sheets with
0.50mm thickness, Coating: Alu-Zinc
coating AZ150 GSM. Tensile Strength:
1035 550 MPA. Paint coating: Regular 423
Modified Polyester painting. Painting
Thickness (Top): 18 to 20 Microns, 1
MAT-01625 BMS-W.55 Sqm
(Bottom): 5 to 7 Microns. Sheet Width:
1.020, Length: Maximum 12 Meters with
Regular Range Colours
Supply of Pre-painted Galvalume
Trapezoidal Profile Roofing sheets with
0.47mm thickness, Coating: Alu-Zinc
coating AZ150 GSM. Tensile Strength:
1036 550 MPA. Paint coating: Regular 397
Modified Polyester painting. Painting
Thickness (Top): 18 to 20 Microns, 1
MAT-01626 BMS-W.56 Sqm
(Bottom): 5 to 7 Microns. Sheet Width:
1.020, Length: Maximum 12 Meters with
Regular Range Colours
Supply of Pre-painted Galvanized
Trapezoidal Profile Roofing sheets with
0.50mm thickness, Coating: Zinc
coating Z120 GSM. Tensile Strength:
1037 300 MPA. Paint coating: Regular 323
Modified Polyester painting. Painting
Thickness (Top): 18 to 20 Microns, 1
MAT-01627 BMS-W.57 Sqm
(Bottom): 5 to 7 Microns. Sheet Width:
1.020, Length: Maximum 12 Meters with
Regular Range Colours
Supply of Pre-painted Galvanized
Trapezoidal Profile Roofing sheets with
0.47mm thickness, Coating: Zinc
coating Z120 GSM. Tensile Strength:
1038 300 MPA. Paint coating: Regular 323
Modified Polyester painting. Painting
Thickness (Top): 18 to 20 Microns, 1
MAT-01628 BMS-W.58 Sqm
(Bottom): 5 to 7 Microns. Sheet Width:
1.020, Length: Maximum 12 Meters with
Regular Range Colours
Supply of Roof Accessories medium
size: Ridge, Barge Cap, Corner Trim, L-
1039 Flashing, Down Pipes, Gutter etc., with 289
MAT-01629 BMS-W.59 0.50mm thick, Width: 0.585, Length: 1 RM
Maximum 2½ Meters
Supply of Roof Accessories medium
size: Ridge, Barge Cap, Corner Trim, L-
1040 Flashing, Down Pipes, Gutter etc., with 263
MAT-01630 BMS-W.60 0.47mm thick, Width: 0.585, Length: 1 RM
Maximum 2½ Meters

177
 Basic Rate
for SoR
S. No CFMS code Item Code Description of item Unit 2024-25
(Rs.)
1 2 3 4 5
1
1041 MAT-01631 BMS-W.61 75 mm long screws - 4
Each
1
1042 MAT-01632 BMS-W.62 G.I scam bolts & nuts 6
Each
1
1043 MAT-01633 BMS-W.63 G.I bolts & nuts 6
Each
1
1044 MAT-01634 BMS-W.64 G.I ‘J’ bolts 8 mm dia 11
Each
1
1045 MAT-01635 BMS-W.65 G.I Washers 2
Each
1
1046 MAT-01636 BMS-W.66 Limpet washers (for scam & ‘J’ bolts) 2
Each
1
1047 MAT-01637 BMS-W.67 Bitumen washers 2
Each
1048 MAT-01638 BMS-W.68 White Cement 1 Kg 32
MS Z Hold fasts - 300 mm long of 40 x 40 x 1
1049 MAT-01639 BMS-W.69 5 mm ISA Each 41

1
1050 MAT-01640 BMS-W.70 Rubber/ Nylon door stop bushes 11
Each
Nylon rollers for sliding glasses/ 1
1051 MAT-01641 BMS-W.71 alluminium windows Each 18

Powder coating or colour annodization-any

1052 MAT-01642 BMS-W.72 section 1 RM 56

Continuous Piano Hinges Powder coated

1053 Mild steel as per IS-3818 : 1992of nominal 41
MAT-01643 BMS-W.73 size 25 mm (B) of thickness 1 RM
0.8 to 1.0 mm
1
1054 MAT-01644 BMS-W.74 Box hinges for cup boards 50
Each
1
1055 MAT-01645 BMS-W.75 Magnetic Catchers 18
Each
Drilling holes in hard rock surfaces up to
1056 MAT-01646 BMS-W.76 18mm dia 1 RM 229

1057 MAT-01647 BMS-W.77 Drilling holes in hard rock above 18mmdia 1 RM 318

Making holes up to 18mm dia in RCC/any 1

1058 MAT-01648 BMS-W.78 stones up to 50 mm thick Each 38

Making holes above 18mm dia in RCC/any 1

1059 MAT-01649 BMS-W.79 stones above 50 mm thick Each 54

Pressure grouting the drilled holes with neat

1060 cement slurry or with approved epoxy 1 55
MAT-01650 BMS-W.80 Each
bonding agent using pump
1061 MAT-01651 BMS-W.81 ITEM DELETED
1062 MAT-01652 BMS-W.82 ITEM DELETED

178
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
CASURINA BALLIES / STEEL
BARRICADING
Fixing steel barricading with MS Angle
Iron Pegs and GI Pipes with nuts & bolts
duly excavating pits and its removal
after the function is over including
transporting of the entire barricading
materials from the Divisional stores to
the barricading site duly engaging
labour to load, transport and unload the 44
materials at barricading site & as per the
schedule given by the departmental
authorities and loading back into the
LAB-00552 trucks, unloading at Divisional stores,
1063 BMS-W.83 accounting for the received materials,
labour for loading, unloading, fixing,
handling etc, complete for finished item
of work
2-TIER (3 days) 1 RM
Providing barricading arrangement with
casurina ballies as per the design duly
excavating pits and its removal after the
function is over including hire charges of
the barricading materials a sper the
BMS-W.84 schedule given by the departmental
authorities complete for finished item of
work
1064 LAB-00553 BMS-W.84.A 2-TIER (2 days) 1 RM 54
1065 LAB-00554 BMS-W.84.B 2-TIER (3 days) 1 RM 55
1066 LAB-00555 BMS-W.84.C 2-TIER (4 days) 1 RM 55
1067 LAB-00556 BMS-W.84.D 3-TIER (2 days) 1 RM 57
1068 LAB-00557 BMS-W.84.E 3-TIER (3 days) 1 RM 57
1069 LAB-00558 BMS-W.84.F 3-TIER (4 days) 1 RM 58
Testing charges
BMS-W.85 Coarse Aggregates
BMS-
1070 LAB-00559 Gradation Test 1 No. 651
W.85.A
1071 LAB-00560 BMS-W.85.B. Aggregate Impact Value Test 1 No. 651
1072 LAB-00561 BMS-W.85.C Flakiness and Elongation Indices Tests 1 No. 758
1073 LAB-00562 BMS-W.85.D Water absorption Test 1 No. 597
1074 LAB-00563 BMS-W.85.E Abrasion Test 1 No. 924
1075 LAB-00564 BMS-W.85.F Specific Gravity Test 1 No. 651
BMS-W.86 Fine Aggregates
BMS-
1076 LAB-00565 Sieve Analysis Test 1 No. 651
W.86.A

179
 Basic
Rate for
S. No CFMS code Item Code Description of item Unit SoR 2024-
25 (Rs.)
1 2 3 4 5
1077 LAB-00566 BMS-W.86.B Bulking & Moisture content 1 No. 651
1078 LAB-00567 BMS-W.86.C Specific Gravity Test 1 No. 651
BMS-W.87 Cement
1079 LAB-00568 BMS-W.87.A Fineness of cement Test Each 651
1080 LAB-00569 BMS-W.87.B Initial & Final setting time of cement Each 651
BMS-W.88 Bricks
1081 LAB-00570 BMS-W.88.A Compressive strength of Bricks Each 379
1082 LAB-00571 BMS-W.88.B Water absorption Test for Brick Each 597
BMS-W.89 Concrete
Compressive strength of concrete i.e
1083 LAB-00572 BMS-W.89.A. Each 379
Cube strength test
1084 LAB-00573 BMS-W.89.B Design mix of one grade 17367
1085 LAB-00574 BMS-W.89.C Design mix of Two grades 28221
1086 LAB-00575 BMS-W.89.D Design mix of three grades 39076
1087 LAB-00576 BMS-W.89.E Design mix of four grades 46674
1088 LAB-00577 BMS-W.89.F Design mix of five grades 55358
Steel
Tensile Strength of Each Dia 1 set (3
1089 LAB-00578 BMS-W.90 Each 758
rods)
BMS-W.91 Soils
1090 LAB-00579 BMS-W.91.A G.S.B Mix design Each 5427
1091 LAB-00580 BMS-W.91.B W.M.M Mix design Each 6622
1092 LAB-00581 BMS-W.91.C B.M Mix design Each 8143
1093 LAB-00582 BMS-W.91.D SDBC/BC Each 8793
1094 LAB-00583 BMS-W.91.E UD samples Each 1953
1095 LAB-00584 BMS-W.91.F Soils MDD and CBR Each 4015
Note: Item BMS-W.46 is removed in the section W and is
brought as new item in the Section N as BMT-N.82.
MACHINERY CHARGES, HIRE
X. SECTION CHARGES FOR CENTRING
Machine charges of rubbing/ polishing
1096 MAT-01653 BMC-X.01 1 day 2270
floor
Power Saw Cutter - Hand Operated -
1097 HIR-00206 BMC-X.02 1 Hr 137
Hire charges
Power Drill - Hand Operated - Hire
1098 HIR-00207 BMC-X.03 1 Hr 126
Charges
1099 MAT-01656 BMC-X.04 Grinding Mortar (Spl Grinding) 1 day 1164
Casuarina Balli Props - 3" to 4" dia - 12'-
1100 MAT-01657 BMC-X.05 Each 81
0" Height
1101 MAT-01658 BMC-X.06 Casuarina Balli Props - 4" to 8" dia - 20'- Each 130

180
 Basic Rate
for SoR
S. No CFMS code Item Code Description of item Unit 2024-
25 (Rs.)
1 2 3 4 5
0" Height

1102 Wall Plate Brackets / beam bottom

MAT-01659 BMC-X.07 supports Each 234

1103 MAT-01660 BMC-X.08 Wedge Plate fixture Each 12

1104 Runner beams of approximately 4" x 4"

MAT-01661 BMC-X.09 size RM 460
1
1105 MAT-01662 BMC-X.10 Steel Plates for form works 1709
Sqm

1106 Scaffolding Pipes & Centering

MAT-01663 BMC-X.11 accessories 1 Kg 133

1107 Scaffold Boards - Bamboo scaffolds -

MAT-01664 BMC-X.12 Bamboos - 8'0" long Each 144

Hire charges for stationary Concrete

1108 pump conforming to IS 21573 Part-1: 374
MAT-01665
BMC-X.13 2006 to deliver the fresh green concrete 1 Hr
Concrete delivery pipes conforming to
1109 IS 15947 Part I: 2012 to be connected to 5
MAT-01666 the pump to delivery point (150 mm
BMC-X.14 Diameter) hire charges per 10 RM 1 Hr
Providing rigid steel cup lock
scaffolding system using steel pipes,
adjustable Jack screw props, RHS
spans, couplers, bracings and
horizontal connecting members,
supporting brackets, RHS span
beams as per the approved
scaffolding designs & plan and other
accessories as per the IS Norms
and stability calculations including
hire charges for cup lock scaffolding
pipes, RHS spans, runners, wooden
members and cost and conveyance
BMC-X.15 of all other consumable accessories,
taxes etc complete for finished item
of work
Note: - Centering & scaffolding
charges for steel scaffolding with
pipes, jack props, centering for
unsupported heights of every 610
mm height above 3.66 M may be
allowed at 16.666% more than the
basic material hire charges and
relevant labour charges of the
applicable floor and item
For SHEAR WALLS, RCC WALLS,
WATER TANK WALLS
Centering charges for Deck Sheets -
9 Ply - 19 mm thick Plywood 1537
conforming to IS:303 BWR Grade ;
Unsupported Height up to 3.66 M -
181
 MS Cup lock System + Marine
Grade Plywood shuttering

Centering charges with MS Steel

Plate - form work : Unsupported 1552
Height up to 3.66 M - MS Cup lock
System + MS Plate shuttering
Centering with Aluminum anodized
sheets and sections conforming to
IS: 11857 – 1986 : Unsupported 1859
Height up to 3.66 M - MS Cup lock
System + Aluminum Plate shuttering
Y SECTION POST TENSIONING WORKS
Supply of Freyssinet type wedge action
anchorage cone block, couplers, anchor
1110 BMC-Y.01 heads and wedges of cast iron make 1 No 2280
shot blasting finish complete assembly
of size 400 x 300 mm as per IS 1343 :
2012
Supply of GI corrugated sheathing duct
1111 BMC-Y.02 of 0.3mm thick of 90 mm size for 1 RM 60
installing the tendons for bonded post
tensioning work as per IS 1343 : 2012

Supply of HDPE grout hose with flanges

1112 BMC-Y.03 for bonded post tensioning work as per 1 RM 36
IS 1343 : 2012

Design and execution of post tensioning

work, including supplying, laying of HT
tendon strands, decoiling, the strands,
cutting to the required lengths, laying of
HT strands in sheathing (GI corrugated
ducts 0.3mm thick) jointing with
couplers and inserting the strands,
profiling, fixing live end anchorages,
making dead end anchorages, including
flowering the strands, fixing tendon
support bars, supervising the fixing of
antibursting reinforcement, stressing the
cables using hydraulic jack, end
trimming, grouting the cables, with
1113 BMC-Y.04 cement slurry, mixed with admixtures 1 MT 227943

with required tools, plants, and

machineries, and consumables etc.,
including all leads, lifts, coordination,
with the post- tensioning agency,
preparation of drawings, obtaining
approval from the Engineer-in-Charge
with supply of approved grade tendons
but excluding the cost of concrete,
reinforcement steel, shuttering, anchors,
sheathing duct etc.,

182
Z SECTION EXPANSION JOINTS
Providing and fixing of expansion joint
system related with floor location as per
drawings and direction of Engineer-In-
Charge. The joints system will be of
extruded aluminum base members, self
aligning / self centering arrangement
and support plates etc. as per ASTM
B221-02. The system shall be such that
it provides floor to floor / floor to wall
expansion control system for various
vertical location in load application
areas that accommodates multi
directional seismic movement without
stress to its components. System shall
consist of metal profiles with a universal
aluminum base member designed to
accommodate various project conditions
and finish floor treatments. The cover
plate shall be designed of width and
thickness required to satisfy projects
movement and loading requirements
and secured to base members by
utilizing manufacturer’s pre-engineered
self-centering arrangement that freely
rotates / moves in all directions. The
Self – centering arrangement shall
exhibit circular sphere ends that lock
and slide inside the corresponding
aluminum extrusion cavity to allow
freedom of movement and flexure in all
directions including vertical
displacement. Provision of Moisture
Barrier Membrane in the Joint System to
have watertight joint is mandatory
requirement all as per the manufactures
design and as approved by Engineer -
in- Charge (Material shall confirm to
ASTM 6063)

BMT-Z.01 Expansion Joint - Floor joint 200mm 7833

RM
wide

BMT-Z.02 Expansion joint- Floor joint 250mm wide RM 9400

Providing and fixing of expansion joint

system related with wall joint (internal/
external) location as per drawings and
direction of Engineer-In- Charge. The
joints shall be of extruded aluminum
base members, self aligning / centering
arrangement and support plates as per
ASTM B221- 02. The material shall be
such that it provides an Expansion
Joints System suitable for vertical wall
to wall/ wall to corner application, both
new and existing construction in office
Buildings & complexes with no slipping
down tendency amongst the
components of the Joint System. The
Joint System shall utilize light weight
aluminum profiles exhibiting minimal
exposed aluminum surfaces
mechanically snap locking the multi
183
 cellular to facilitate movement. (Material
shall confirm to ASTM 6063)

BMT-Z.03 Expansion joint- wall joint 200mm wide RM 3747

BMT-Z.04 Expansion joint- wall joint 250mm wide RM 5252

Providing and fixing of expansion joint

system of approved make and
manufactures for various roof locations
as per approved drawings and direction
of Engineer-In-Charge. The joints shall
be of extruded aluminum base members
with, self aligning and self centering
arrangement support plates as per
ASTM B221-02. The system shall be
such that it provides watertight roof to
roof/roof to corner joint cover expansion
control system that is capable of
accommodating multidirectional seismic
movement without stress to its
components. System shall consist of
metal profile that incorporates a
universal aluminum base member
designed to accommodate various
project conditions and roof treatments.
The cover plate shall be designed of
width and thickness required to satisfy
movement and loading requirements
and secured to base members by
utilizing manufacturer’s pre-engineered
self-centering arrangement that freely
rotates / moves in all directions. The
Self centering arrangement shall exhibit
circular sphere ends that lock and slide
inside the corresponding aluminum
extrusion cavity to allow freedom of
movement and flexure in all directions
including vertical displacement. The
Joint System shall resists damage or
deterioration from the impact of falling
ice, exposure to UV, airborne
contaminants and occasional foot traffic
from maintenance personnel. Provision
of Moisture Barrier Membrane in the
Joint System to have water tight joint is
mandatory requirement. Material shall
confirm to ASTM 6063.

BMT-Z.05 Expansion joint- Roof joint 200mm wide RM 5814

BMT-Z.06 Expansion joint- Roof joint 250mm wide RM 7318

AA SECTION ENERGY EFFICIENT ITEMS

SUB-SECTION -IX External wall insulation with Polyurethane foam (PUF) slab

Providing and fixing polyurethane foam

(PUF) slab 40mm thick average with PU 1272
BMT-ZA.01 slab density 36+/-2 kg/m³ for external wall 1sqm
insulation including necessary polymerized
plaster reinforced with glass fibre mesh,

184
 epoxy based bonding adhesive etc.,
complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete

SUB-SECTION -X External wall insulation with Polyurethane foam (PUF) spray

Providing and fixing cast in situ

polyurethane foam (PUF) spray of 40mm
/ 50mm thick with PU foam spray density
35+/-5 kg/m³ for external wall insulation 1306
BMT-ZA.02 including necessary adhesive etc., complete 1sqm
with all lead and lift, transportation charges,
loading unloading charges ,all taxes, cost of
all materials, labour, HOM of machinery
etc., complete
External wall insulation with Extruded Polystyrene (XPS)
SUB-SECTION -XI
thermal insulation board
Providing and fixing Extruded Polystyrene
(XPS) thermal insulating boards of 25mm
thick for external wall insulation including
BMT-ZA.03 necessary fasteners etc., complete with all 509
1sqm
lead and lift, transportation charges, loading
unloading charges, all taxes, cost of all
materials, labour, HOM of machinery etc.,
complete
Providing and fixing Extruded Polystyrene
(XPS) thermal insulating boards of 50mm
thick for external wall insulation including
BMT-ZA.04 necessary fasteners etc., complete with all 809
1sqm
lead and lift, transportation charges, loading
unloading charges, all taxes, cost of all
materials, labour, HOM of machinery etc.,
complete
Providing and fixing Extruded Polystyrene
(XPS) thermal insulating boards of 75mm
thick for external wall insulation including
BMT-ZA.05 necessary fasteners etc., complete with all 1148
1sqm
lead and lift, transportation charges, loading
unloading charges, all taxes, cost of all
materials, labour, HOM of machinery etc.,
complete
Providing and fixing Extruded Polystyrene
(XPS) thermal insulating boards of
100mm thick for external wall insulation
BMT-ZA.06 including necessary fasteners etc., complete 1486
1sqm
with all lead and lift, transportation charges,
loading unloading charges, all taxes, cost of
all materials, labour, HOM of machinery
etc., complete

SUB-SECTION -XII Cavity wall insulation with Glass Wool Slab

Providing and fixing polyurethane foam

(PUF) spray with PU foam spray of
40mm thick having density 35+/-5 kg/cum
BMT-ZA.07 density for insulation of cavity wall with 638
1sqm
including necessary fasteners etc., complete
with all lead and lift, transportation charges,
loading unloading charges, all taxes, cost of
all materials, labour, HOM etc., complete

185
 Providing and fixing polyurethane foam
(PUF) spray with PU foam spray of
50mm thick having density 35+/-5 kg/cum
BMT-ZA.08 density for insulation of cavity wall with 936
1sqm
including necessary fasteners etc., complete
with all lead and lift, transportation charges,
loading unloading charges, all taxes, cost of
all materials, labour, HOM etc., complete

SUB-SECTION -XIII Cavity wall with Glass Wool Slab

Providing and fixing glass wool slab of

12mm thick - resin bonded with density
48kg/ cum for insulation of cavity wall,
fixed using GI wire 200 SWG, GI chicken
BMT-ZA.09 mesh 12.50mm x 24 SWG including 528
1sqm
necessary criss-cross GI wire mesh,raw
plugs, adhesive etc., complete with all lead
and lift, transportation charges, loading
unloading charges, all taxes, cost of all
materials, labour, HOM etc., complete
Providing and fixing glass wool slab of
25mm thick - resin bonded with density
48kg/ cum for insulation of cavity wall,
fixed using GI wire 200 SWG, GI chicken
mesh 12.50mm x 24 SWG including 669
1sqm
necessary criss-cross GI wire mesh,raw
plugs, adhesive etc., complete with all lead
and lift, transportation charges, loading
unloading charges, all taxes, cost of all
materials, labour, HOM etc., complete
Providing and fixing glass wool slab of
50mm thick - resin bonded with density
48kg/ cum for insulation of cavity wall,
fixed using GI wire 200 SWG, GI chicken
mesh 12.50mm x 24 SWG including 790
1sqm
necessary criss-cross GI wire mesh,raw
plugs, adhesive etc., complete with all lead
and lift, transportation charges, loading
unloading charges, all taxes, cost of all
materials, labour, HOM etc., complete

SUB-SECTION -XIII Cavity wall with Rock Wool Slab

Providing and fixing rock wool slab - resin

bonded rock wool slab of 25mm thick
having density 36+/-5 kg/cum for insulation
of cavity wall with including necessary
BMT-ZA.10 criss-cross GI wire, mesh,raw plugs, 1sqm 440
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete
Providing and fixing rock wool slab - resin
bonded rock wool slab of 40mm thick
having density 36+/-5 kg/cum for insulation
of cavity wall with including necessary
criss-cross GI wire, mesh,raw plugs, 1sqm 472
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete

186
 Providing and fixing rock wool slab - resin
bonded rock wool slab of 50mm thick
having density 36+/-5 kg/cum for insulation
of cavity wall with including necessary
criss-cross GI wire, mesh,raw plugs, 1sqm 491
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete
Providing and fixing rock wool slab - resin
bonded rock wool slab of 65mm thick
having density 36+/-5 kg/cum for insulation
of cavity wall with including necessary
criss-cross GI wire, mesh,raw plugs, 1sqm 526
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete
Providing and fixing rock wool slab - resin
bonded rock wool slab of 75mm thick
having density 36+/-5 kg/cum for insulation
of cavity wall with including necessary
criss-cross GI wire, mesh,raw plugs, 1sqm 546
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete
Providing and fixing rock wool slab - resin
bonded rock wool slab of 100mm thick
having density 36+/-5 kg/cum for insulation
of cavity wall with including necessary
criss-cross GI wire, mesh,raw plugs, 1sqm 780
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete

SUB-SECTION -XIV Cavity wall insulation with Extruded Polystyrene (XPS)

Providing and fixing extruded polystyrene

(XPS) 50mm thick thermal insulating
boards having density 36+/-5 kg/cum for
insulation of cavity wall including necessary
BMT-ZA.11 criss-cross GI wire, mesh,raw plugs, 1sqm 1032
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete
Providing and fixing extruded polystyrene
(XPS) 60 mm thick thermal insulating
boards having density 36+/-5 kg/cum for
insulation of cavity wall including necessary
criss-cross GI wire, mesh,raw plugs, 1sqm 1053
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete
Providing and fixing extruded polystyrene
(XPS) 70mm thick thermal insulating
boards having density 36+/-5 kg/cum for
1sqm 1374
insulation of cavity wall including necessary
criss-cross GI wire, mesh,raw plugs,
adhesive etc., complete with all lead and lift,

187
 transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM etc., complete
Providing and fixing extruded polystyrene
(XPS) 25mm thick thermal insulating
boards having dentity 32 kg/cum for
insulation of cavity wall including necessary
BMT-ZA.12 criss-cross GI wire, mesh, raw plugs, 1sqm 709
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM complete.
Providing and fixing extruded polystyrene
(XPS) 50mm thick thermal insulating
boards having dentity 32 kg/cum for
insulation of cavity wall including necessary
criss-cross GI wire, mesh, raw plugs, 1sqm 1032
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM complete.
Providing and fixing extruded polystyrene
(XPS) 75mm thick thermal insulating
boards having dentity 32 kg/cum for
insulation of cavity wall including necessary
criss-cross GI wire, mesh, raw plugs, 1sqm 1398
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM complete.
Providing and fixing extruded polystyrene
(XPS) 100mm thick thermal insulating
boards having dentity 32 kg/cum for
insulation of cavity wall including necessary
criss-cross GI wire, mesh, raw plugs, 1sqm 1763
adhesive etc., complete with all lead and lift,
transportation charges, loading unloading
charges, all taxes, cost of all materials,
labour, HOM complete.

SUB-SECTION -XVII Over deck insulation with polyurethane foam (PUF) slab

40 mm thick with PU slab density 36+/-2

BMT-ZA.13 1sqm 361
kg/m³ insulation for over
50 mm thick with PU slab density 36+/-2
BMT-ZA.14 1sqm 598
kg/m³ insulation for over
60 mm thick with PU slab density 36+/-2
BMT-ZA.15 1sqm 852
kg/m³ insulation for over
70 mm thick with PU slab density 36+/-2
BMT-ZA.16 1sqm 1100
kg/m³ insulation for over

SUB-SECTION -XVIII Over deck insulation with polyurethane foam (PUF) spray

BMT-ZA.17 40mm thick with PU foam spray 1sqm 620

BMT-ZA.19 60mm thick with PU foam spray 1sqm 1349

BMT-ZA.20 70mm thick with PU foam spray 1sqm 1687

188
 Over deck thermal insulation of roof with expanded
SUB-SECTION -XIX
Polystyrene (EPS

BMT-ZA.21 Expanded polystyrene (EPS) 50mm thick 1sqm 586

BMT-ZA.22 Expanded polystyrene (EPS) 70mm thick 1sqm 690

BMT-ZA.23 Expanded polystyrene (EPS) 90mm thick 1sqm 762

BMT-ZA.24 Expanded polystyrene (EPS) 110mm thick 1sqm 866

BMT-ZA.25 Expanded polystyrene (EPS) 120mm thick 1sqm 920

SUB-SECTION -XX Over deck with glass wool slab

Resin bonded glass wool slab 12 mm thick

BMT-ZA.26 1sqm 972
having density 48kgs/ m³
Resin bonded glass wool slab 25 mm thick
BMT-ZA.27 1sqm 1113
having density 48kgs/ m³
Resin bonded glass wool slab 50 mm thick
BMT-ZA.28 1sqm 1236
having density 48kgs/ m³

SUB-SECTION -XXI Over deck insulation with rock wool slab

25mm resin bonded rock wool slab having
BMT-ZA.28 1sqm 628
density 48kgs/ m³
40mm resin bonded rock wool slab having
BMT-ZA.29 1sqm 659
density 48kgs/ m³
50mm resin bonded rock wool slab having
BMT-ZA.30 1sqm 676
density 48kgs/ m³
65mm resin bonded rock wool slab having
BMT-ZA.31 1sqm 705
density 48kgs/ m³
75mm resin bonded rock wool slab having
BMT-ZA.32 1sqm 729
density 48kgs/ m³
100mm resin bonded rock wool slab having
BMT-ZA.33 1sqm 785
density 48kgs/ m³

SECTION AB PEB STRUCTURES

Pre Engineered Building (PEB):
Secondary members which includes
Purlins, Girts, Edge Angle, etc.
Members formed from Galvanized
BMT-ZB.01 Coils of 275 GSM and will conform to 1MT 81019
the physical specifications of ASTM
A572/ A572M (Grade 50) or equivalent
and shall have a minimum yield
strength of 345 MPA
Galvanized Roofing Deck sheets with
1mm thickness, Coating: Zinc coating
Z125 / Z275/ Z 500 GSM. Yield
BMT-ZB.02 1KG 133
Strength: E250. crest to crest width
130 mm length 12 meters : profile
width 982mm and profile depth 44mm

189
 CR steel as per IS-513 HR steel as per
IS 1079 and Galvanized Steel as per
IS 277

Labor charges for fixing Galvanized

Roofing Deck sheets to structural
BMT-ZB.03 1KG 5
beams and columns for laying RCC
slab
High Strength friction grip bolts of 8.8
Grade with electroplated & yellow
BMT-ZB.04 1KG 116
passivation for PEB structure.

BMT-ZB.05 Cost of Electroplating 1KG 20

Cutting Cores in 125 mm thick RCC

BMT-ZB.06 Each 234
Slabs 75 mm dia.
Cutting Cores in 125 mm thick RCC
BMT-ZB.07 Each 286
Slabs 100 mm dia
Cutting Cores in 125 mm thick RCC
BMT-ZB.08 Each 364
Slabs 150 mm dia.
Labor charges for cutting & fixing
BMT-ZB.09 Thermocol & Cement Bonded Board 1sqm 104
for Wrapping around PEB columns

1 All the items to be used on the works shall be of first quality & ISI marked wherever
possible and as approved, workmanship shall be as approved by the Engineer-In-charge
of the work.
2 Supply Rates for all the materials are based on market rates excluding GST.
3 SSR Rates for Building items are purely for the guidance of the officers in preparation of
estimates vide para.113 ofAPPWD code. Authority who prepares the estimate is however
responsible for proper rates as envisaged in para.45 of APPWD code.

LEGEND:
"BMT" -X.XX,
"BMM"-X.XX,
"BMS"-X.XX,
"BMC"-X.XX
XXX- "A".XX - Denotes the Section
XXX-X."01" - Denotes the Serial Number of the Item in the corresponding Section

190
 Centring
Material Hire Labour Charges Unit of
Sl NAME OF THE STRUCTURAL charges charges Measurem
for 2019-
MEMBER ent
20
1 2 3 4 5 6

HIRE CHARGES FOR CENTERING AND SCAFFOLDING

A FOOTINGS Rs. 301 Rs. 672 Rs. 973 per 1 cum

B BED BLOCKS, BANDS Rs. 67 Rs. 363 Rs. 430 per 1 cum
C PEDESTALS Rs. 343 Rs. 1069 Rs. 1412 per 1 cum
D PLINTH BEAMS Rs. 1453 Rs. 1620 Rs. 3073 per 1 cum
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto
3.66 M Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering
Plates,etc.,
E LINTELS Rs. 1233 Rs. 1720 Rs. 2953 per 1 cum
F CHAJJAS - SUNSHADES Rs. 243 Rs. 264 Rs. 507 per 1 sqm
G COLUMNS Rs. 371 Rs. 2415 Rs. 2786 per 1 cum
H BEAMS Rs. 2179 Rs. 2027 Rs. 4206 per 1 cum
I SLABS - Up to 150 mm thick Rs. 247 Rs. 241 Rs. 488 per 1 sqm
J SLABS - above 150 mm - Up to 300 Rs. 254 Rs. 248 Rs. 502 per 1 sqm
mm thick
K SLABS - above 300 mm thick Rs. 265 Rs. 260 Rs. 525 per 1 sqm
L WAFFLE - (GRID) SLABS (Rib Rs. 897 Rs. 834 Rs. 1731 per 1 sqm
Beams with Slabs)
M PERGOLA SLABS (Only Rib Beams) Rs. 629 Rs. 585 Rs. 1214 per 1 sqm
N ARCH BEAMS - up to 1.5 M Span Rs. 2477 Rs. 2304 Rs. 4781 per 1 cum
O ARCH BEAMS - above 1.5 M Span Rs. 2512 Rs. 2336 Rs. 4848 per 1 cum
P DOME SLABS Rs. 4005 Rs. 3723 Rs. 7728 per 1 cum
Q HELICAL STAIRCASES Rs. 305 Rs. 284 Rs. 589 per 1 sqm
Q SHEAR WALLS, RCC WALLS, WATER Rs. 472 Rs. 510 Rs. 982 per 1 sqm
TANK WALLS

HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M Casurina Ballies,
Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,

E LINTELS Rs. 826 Rs. 1332 Rs. 2158 per 1 cum

F CHAJJAS - SUNSHADES Rs. 163 Rs. 204 Rs. 367 per 1 sqm
G COLUMNS Rs. 249 Rs. 1871 Rs. 2120 per 1 cum
H BEAMS Rs. 1458 Rs. 1569 Rs. 3027 per 1 cum
I SLABS - Up to 150 mm thick Rs. 165 Rs. 186 Rs. 351 per 1 sqm
J SLABS - above 150 mm - Up to 300 Rs. 170 Rs. 193 Rs. 363 per 1 sqm
mm thick
K SLABS - above 300 mm thick Rs. 178 Rs. 201 Rs. 379 per 1 sqm
L WAFFLE - (GRID) SLABS (Rib Beams Rs. 601 Rs. 646 Rs. 1247 per 1 sqm
with
Slabs)
M PERGOLA SLABS (Only Rib Beams) Rs. 421 Rs. 453 Rs. 874 per 1 sqm
N ARCH BEAMS - up to 1.5 M Span Rs. 1657 Rs. 1784 Rs. 3441 per 1 cum
O ARCH BEAMS - above 1.5 M Span Rs. 1681 Rs. 1808 Rs. 3489 per 1 cum
P DOME SLABS Rs. 2681 Rs. 2884 Rs. 5565 per 1 cum
Q HELICAL STAIRCASES Rs. 205 Rs. 220 Rs. 425 per 1 sqm

Centring
Material Hire Labour Charges Unit of
Sl NAME OF THE STRUCTURAL charges charge for 2018- Measureme
MEMBER s 19 nt
1 2 3 4 5 6
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden
Reapers, Runners, Wood Posts, Wall Plates etc., for BRICK MASONRY/ STONE MASONRY - 1
sqm (Wall Area)
A 1st - Floor Rs. 10.78 Rs. 84.62 Rs. 95.40 per 1 sqm
B 2nd - Floor Rs. 10.78 Rs. 121.18 Rs. 131.96 per 1 sqm
C 3rd - Floor Rs. 10.78 Rs. 157.72 Rs. 168.50 per 1 sqm
D 4th - Floor Rs. 10.78 Rs. 194.27 Rs. 205.05 per 1 sqm
E 5th - Floor Rs. 10.78 Rs. 230.81 Rs. 241.59 per 1 sqm
F 6th - Floor Rs. 10.78 Rs. 267.35 Rs. 278.13 per 1 sqm
G 7th - Floor Rs. 10.78 Rs. 303.88 Rs. 314.66 per 1 sqm
H 8th - Floor Rs. 10.78 Rs. 340.43 Rs. 351.21 per 1 sqm
I 9th - Floor Rs. 10.78 Rs. 376.98 Rs. 387.76 per 1 sqm
J 10th - Floor Rs. 10.78 Rs. 413.51 Rs. 424.29 per 1 sqm
K 11th - Floor Rs. 10.78 Rs. 450.06 Rs. 460.84 per 1 sqm
L 12th - Floor Rs. 10.78 Rs. 486.61 Rs. 497.39 per 1 sqm

191
M 13th - Floor Rs. 10.78 Rs. 523.15 Rs. 533.93 per 1 sqm
N 14th - Floor Rs. 10.78 Rs. 559.68 Rs. 570.46 per 1 sqm
O 15th - Floor Rs. 10.78 Rs. 596.23 Rs. 607.01 per 1 sqm

HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos,
Wooden Reapers, Runners, Wood Posts, Wall Plates etc., for PLASTERING
to WALLS - 1 sqm

Centring
Material Hire Labour Unit of
Sl NAME OF THE STRUCTURAL MEMBER Charges for
charges charges Measurement
2018-19
1 2 3 4 5 6

A 1st - Floor Rs. 1.08 Rs. 8.47 Rs. 9.55 per 1 sqm
B 2nd - Floor Rs. 1.08 Rs. 12.12 Rs. 13.20 per 1 sqm
C 3rd - Floor Rs. 1.08 Rs. 15.77 Rs. 16.85 per 1 sqm
D 4th - Floor Rs. 1.08 Rs. 19.43 Rs. 20.51 per 1 sqm
E 5th - Floor Rs. 1.08 Rs. 23.08 Rs. 24.16 per 1 sqm
F 6th - Floor Rs. 1.08 Rs. 26.73 Rs. 27.81 per 1 sqm
G 7th - Floor Rs. 1.08 Rs. 30.38 Rs. 31.46 per 1 sqm
H 8th - Floor Rs. 1.08 Rs. 34.05 Rs. 35.13 per 1 sqm
I 9th - Floor Rs. 1.08 Rs. 37.70 Rs. 38.78 per 1 sqm
J 10th - Floor Rs. 1.08 Rs. 41.35 Rs. 42.43 per 1 sqm
K 11th - Floor Rs. 1.08 Rs. 45.01 Rs. 46.09 per 1 sqm
L 12th - Floor Rs. 1.08 Rs. 48.66 Rs. 49.74 per 1 sqm
M 13th - Floor Rs. 1.08 Rs. 52.31 Rs. 53.39 per 1 sqm
N 14th - Floor Rs. 1.08 Rs. 55.97 Rs. 57.05 per 1 sqm
O 15th - Floor Rs. 1.08 Rs. 59.62 Rs. 60.70 per 1 sqm

HIRE CHARGES FOR STAGE SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden
Reapers, Runners, Wood Posts, Wall Plates etc., for CEILING PLASTERING - 1 sqm

A 1st - Floor Rs. 2.57 Rs. 16.94 Rs. 19.51 per 1 sqm

B 2nd - Floor Rs. 2.57 Rs. 24.04 Rs. 26.61 per 1 sqm
C 3rd - Floor Rs. 2.57 Rs. 31.13 Rs. 33.70 per 1 sqm
D 4th - Floor Rs. 2.57 Rs. 38.23 Rs. 40.80 per 1 sqm
E 5th - Floor Rs. 2.57 Rs. 45.33 Rs. 47.90 per 1 sqm
F 6th - Floor Rs. 2.57 Rs. 52.42 Rs. 54.99 per 1 sqm
G 7th - Floor Rs. 2.57 Rs. 59.52 Rs. 62.09 per 1 sqm
H 8th - Floor Rs. 2.57 Rs. 66.62 Rs. 69.19 per 1 sqm
I 9th - Floor Rs. 2.57 Rs. 73.72 Rs. 76.29 per 1 sqm
J 10th - Floor Rs. 2.57 Rs. 80.81 Rs. 83.38 per 1 sqm
K 11th - Floor Rs. 2.57 Rs. 87.91 Rs. 90.48 per 1 sqm
L 12th - Floor Rs. 2.57 Rs. 95.01 Rs. 97.58 per 1 sqm
M 13th - Floor Rs. 2.57 Rs. 102.03 Rs. 104.60 per 1 sqm
N 14th - Floor Rs. 2.57 Rs. 109.19 Rs. 111.76 per 1 sqm
O 15th - Floor Rs. 2.57 Rs. 116.30 Rs. 118.87 per 1 sqm

192
 CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES
for Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., for
unsupported height 3.66M
SLA SLABS - WAFFLE PERGO
ARCH ARCH SHEAR
CHAJJA B S above SLABS - - (GRID) LA HELI
COLU BEA BEAM BEAM
FLOOR LINTELS S - - 150 above SLABS SLAB S DOME CAL WALLS,
MNS MS S S SLAB RCC
SUNSH Up mm 300 (Rib (Only STAI
- up to - above S WALLS,
ADES to - Up to mm Beams Rib R-
Beams ) 1.5 1.5 WATER
150 300 mm thick with CAS
thick Slabs) M M TANK
mm ES
Span Span WALLS
thic
k
Material Hire for
H 1233 243 371 2179 247 254 265 897 629 2477 2512 4005 305 472
any Floor
Labour
510
Charges for 1st L 1720 264 2415 2027 241 248 260 834 585 2304 2336 3723 284
Floor
Total Hire
Charges (H+L) T 2953 507 2786 4206 488 502 525 1731 1214 4781 4848 7728 589 982

1st - Floor L 1720 264 2415 2027 241 248 260 834 585 2304 2336 3723 284 510
2nd - Floor L 1892 290 2657 2230 265 273 286 917 644 2534 2570 4095 312 561
3rd - Floor L 2064 317 2898 2432 289 298 312 1001 702 2765 2803 4468 341 612
4th - Floor L 2236 343 3140 2635 313 322 338 1084 761 2995 3037 4840 369 663
5th - Floor L 2408 370 3381 2838 337 347 364 1168 819 3226 3270 5212 398 714
6th - Floor L 2580 396 3623 3041 362 372 390 1251 878 3456 3504 5585 426 765
7th - Floor L 2752 422 3864 3243 386 397 416 1334 936 3686 3738 5957 454 816
8th - Floor L 2924 449 4106 3446 410 422 442 1418 995 3917 3971 6329 483 867
9th - Floor L 3096 475 4347 3649 434 446 468 1501 1053 4147 4205 6701 511 918
10th -Floor L 3268 502 4589 3851 458 471 494 1585 1112 4378 4438 7074 540 969
11th -Floor L 3440 528 4830 4054 482 496 520 1668 1170 4608 4672 7446 568 1020
12th -Floor L 3612 554 5072 4257 506 521 546 1751 1229 4838 4906 7818 596 1071
13th -Floor L 3784 581 5313 4459 530 546 572 1835 1287 5069 5139 8191 625 1122
14th -Floor L 3956 607 5555 4662 554 570 598 1918 1346 5299 5373 8563 653 1173
15th -Floor L 4128 634 5796 4865 578 595 624 2002 1404 5530 5606 8935 682 1224

Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for unsupported heights of every 610 mm
height above 3.66 M, may be allowed at 16.666% more than the basic material hire charges and relevant labour charges
of the applicable floor and item

193
 CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES
for Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates, Steel Centring Plates etc., for
unsupported height 3.66 M
WAFFLE
SLABS ARC
SLABS - SLABS - (GRID) PERGOL ARCH
CHAJJA - H DOME
LINTEL COLUMN Up to - SLABS A BEAM HELICAL
FLOOR S - BEAMS 150 above BEA SLAB
S S above (Rib SLABS S STAIRCASE
SUNSHA 150 M S
mm 300 Beam (Only - above S
DE S mm S -
thick mm s with Rib 1.5
- Up to Slabs) up to
thick Beams) M
300 1.5 M
Spa
mm Span
n
thick

H
826 163 249 1458 165 170 178 601 421 1657 1681 2681 501
Material Hire
for any Floor

Labour L
1332 204 1871 1569 186 193 201 646 453 1784 1808 2884 220
Charges for
1st Floor

Total Hire T 2158 367 2120 3027 351 363 379 1247 874 3441 3489 5565 721
Charges
(H+L)

1st - Floor L 1332 204 1871 1569 186 193 201 646 453 1784 1808 2884 220

2nd - Floor L 1465 224 2058 1726 205 212 221 711 498 1962 1989 3172 242
3rd - Floor L 1598 245 2245 1883 223 232 241 775 544 2141 2170 3461 264

4th - Floor L 1732 265 2432 2040 242 251 261 840 589 2319 2350 3749 286

5th - Floor L 1865 286 2619 2197 260 270 281 904 634 2498 2531 4038 308

6th - Floor L 1998 306 2807 2354 279 290 302 969 680 2676 2712 4326 330

7th - Floor L 2131 326 2994 2510 298 309 322 1034 725 2854 2893 4614 352

8th - Floor L 2264 347 3181 2667 316 328 342 1098 770 3033 3074 4903 374

9th - Floor L 2398 367 3368 2824 335 347 362 1163 815 3211 3254 5191 396

10th - Floor L 2531 388 3555 2981 353 367 382 1227 861 3390 3435 5480 418
11th - Floor L 2664 408 3742 3138 372 386 402 1292 906 3568 3616 5768 440
12th - Floor L 2797 428 3929 3295 391 405 422 1357 951 3746 3797 6056 462
13th - Floor L 2930 449 4116 3452 409 425 442 1421 997 3925 3978 6345 484
14th - Floor L 3064 469 4303 3609 428 444 462 1486 1042 4103 4158 6633 506
15th - Floor L 3197 490 4490 3766 446 463 482 1550 1087 4282 4339 6922 528

194
Note:-

1) All Materials conforming to ISI or relevant International

Standards shall be used in all CIVIL, Water Supply & Sanitary
Fittings, Electrical and Electro-Mechanical Works.

2) Concerned departments shall approve the materials either

fromthe manufacturer or from its authorized /certified dealer only
and also to approve the brands of the products / materials to be
adopted in their estimates at their end. In case common
approval is required by the committee, concerned authority shall
propose with all the details after thorough verification, to the
committee for considering the proposal.

3) SoR rates for Civil and Water supply & Sanitary items are
purely for guidance of the officers in preparation of estimates
vide para 113 of APPWD Code. Authority who prepares
the estimate is, however responsible for proper rates as
envisaged in Para 45 of APPWD Code.

4) The rates published in the Buildings SoR 2022-223 are the

ceiling rates only and the estimate preparing authorities are
responsible for the correctness and reasonableness of the rates
and technical specifications adopted in the estimates.

195
196
WATER SUPPLY
&
SANITARY ITEMS

197
 WATER SUPPLY & SANITARY ITEMS
Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)

1 2 3 4 5
A S.W.G. PIPES & FITTINGS
Supplying, laying, jointing and testing 101.6 mm SWG SP-1 419
pipes of ISI make conforming to ISI 651 & 4127 with airtight
1 MAT-01667 BMW-A.01 cement joints in CM 1.5:1 prop. Including excavation of 1 RM
trenches and socket pits in any soil (except rock requiring
blasting) up to 1524 mm(5'0") depth and refilling with
watering and tamping.
Supplying, laying, jointing and testing 101.6 mm SWG SP-1 417
pipes of ISI make conforming to ISI 651 & 4127 with airtight
2 MAT-01668 BMW-A.02 cement joints in CM 1:5:1 prop. including excavation of 1 RM
trenches and socket pits in any soil (except rock requiring
blasting) up to 914.4 mm (3'0") depth and refilling with
watering and tamping.
Supplying, laying, jointing and testing 152.4 mm SWG SP-1 620
pipes of ISI make conforming to ISI 651 & 4127 with airtight
3 MAT-01669 BMW-A.03 cement joints in CM 1.5:1 prop. including excavation of 1 RM
trenches and socket pits in any soil (except rock requiring
blasting) up to 1524 mm(5'0") depth and refilling with
watering and tamping.
Supplying, laying, jointing and testing 152.4 mm SWG SP-1 609
pipes of ISI make conforming to ISI 651 & 4127 with airtight
4 MAT-01670 BMW-A.04 cement joints in CM 1.5:1 prop. including excavation of 1 RM
trenches and socket pits in any soil (except rock requiring
blasting) up to 914.4 mm (3'0")) depth and refilling with
watering and tamping.
labour charges only for laying, jointing and testing SWG 276
pipes of any diawith airtight cement joints including
5 LAB-00411 BMW-A.05 excavation of trenches and socket pits in any soil up to 1 RM
914.4 mm (3'0") depth (except rock requiring blasting) and
refilling with watering and tamping.
labour charges only for laying, jointing and testing SWG 342
pipes of any diawith airtight cement joints including
6 LAB-00412 BMW-A.06 excavation of trenches and socket pits in any soil up to 1524 1 RM
mm (5'-0") depth (except rock requiring blasting) and
refilling with watering and tamping.
a)Supplying, laying, jointing and testing 152.4 mmCC bed 227
7 MAT-01671 BMW-A.07 1:2:4 Prop: using 19.05mm gauge graded granite metal 1 RM
chips and cradling 101.6 mm SWG pipe line all round to
have 76.2 mm thick cover over the sockets.
8 LAB-00413 BMW-A.08 b) - do - labour charges only 1 RM 12

a)Supplying , laying, jointing and testing 152.4 mmCC bed 315

9 MAT-01672 BMW-A.09 1:2:4 Prop: using 19.05mm gauge graded granite metal 1 RM
chips and cradling 152.4 mm SWG pipe line all round to
have 76.2 mm thick cover over the sockets.
10 LAB-00414 BMW-A.10 b) - do - labour charges only 1 RM 59

a) Supplying & Laying 101.6 mm SWG channels with 88

11 MAT-01673 BMW-A.11 cement mortar joints with suitable brick masonry for fixing 1 RM
the channels in position

198
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
12 LAB-00150 BMW-A.12 b) - do - labour charges only 1 RM 43

a) Supplying & Laying 152.4 mm SWG channels with 162

13 MAT-01674 BMW-A.13 cement mortar joints with suitable brick masonry for fixing 1 RM
the channels in position
14 LAB-00151 BMW-A.14 b) - do - labour charges only 1 RM 62

Supply of SWG SP-1 Pipe conforming to ISI 651- 4" dia 167
15 MAT-01675 BMW-A.15 1 RM
(101.6mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 6" dia 291
16 MAT-01676 BMW-A.16 1 RM
(152.4mm)
Supply of SWG SP-1 Pipe conforming to ISI 651-8" dia 448
17 MAT-01677 BMW-A.17 1 RM
(203.2mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 10" dia 821
18 MAT-01678 BMW-A.18 1 RM
(254 mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 12" dia 1183
19 MAT-01679 BMW-A.19 1 RM
(300 mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 14" dia 1611
20 MAT-01680 BMW-A.20 1 RM
(350 mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 16" dia 1941
21 MAT-01681 BMW-A.21 1 RM
(400 mm)
Supply of SWG SP-1 Pipe conforming to ISI 651- 18" dia 2344
22 MAT-01682 BMW-A.22 1 RM
(450 mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 4" dia 207
23 MAT-01683 BMW-A.23 1 RM
(101.6mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 6" dia 307
24 MAT-01684 BMW-A.24 1 RM
(152.4mm)
Supply of SWG SP-2 Pipe conforming to ISI 651-8" dia 553
25 MAT-01685 BMW-A.25 1 RM
(203.2mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 10" dia 870
26 MAT-01686 BMW-A.26 1 RM
(254 mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 12" dia 1337
27 MAT-01687 BMW-A.27 1 RM
(300 mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 14" dia 1733
28 MAT-01688 BMW-A.28 1 RM
(350 mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 16" dia 1996.
29 MAT-01689 BMW-A.29 1 RM
(400 mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 18" dia 2547
30 MAT-01690 BMW-A.30 1 RM
(450 mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 4" dia 264
31 MAT-01691 BMW-A.31 1 RM
(101.6mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 6" dia 383
32 MAT-01692 BMW-A.32 1 RM
(152.4mm)
Supply of SWG SP-3 Pipe conforming to ISI 651-8" dia 678
33 MAT-01693 BMW-A.33 1 RM
(203.2mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 10" dia 1031
34 MAT-01694 BMW-A.34 1 RM
(254 mm)

199
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply of SWG SP-3 Pipe conforming to ISI 651- 12" dia 1441
35 MAT-01695 BMW-A.35 1 RM
(300 mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 14" dia 1829
36 MAT-01696 BMW-A.36 1 RM
(350 mm)
Supply of SWG SP-2 Pipe conforming to ISI 651- 16" dia 2105
37 MAT-01697 BMW-A.37 1 RM
(400 mm)
Supply of SWG SP-3 Pipe conforming to ISI 651- 18" dia 2864
38 MAT-01698 BMW-A.38 1 RM
(450 mm)
Supply of SWG Bends conforming to IS standards -100 mm 84
39 MAT-01699 BMW-A.39 Each
dia
Supply of SWG Bends conforming to IS standards -150 mm 155
40 MAT-01700 BMW-A.40 Each
dia
Supply of SWG Bends conforming to IS standards -200 mm 293
41 MAT-01701 BMW-A.41 Each
dia
Supply of SWG Bendsconforming to IS standards -250 mm 594
42 MAT-01702 BMW-A.42 Each
dia
Supply of SWG Bends conforming to IS standards -300 mm 755
43 MAT-01703 BMW-A.43 Each
dia
Supply of SWG Bends conforming to IS standards -350 mm 943
44 MAT-01704 BMW-A.44 Each
dia
Supply of SWG Junctions (T's & Y's) conforming to IS 162
45 MAT-01705 BMW-A.45 Each
standards with length of barrel 60 cm for - 100 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS 238
46 MAT-01706 BMW-A.46 Each
standards with length of barrel 60 cm for - 150 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS 260
47 MAT-01707 BMW-A.47 Each
standards with length of barrel 60 cm for - 150 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS 371
48 MAT-01708 BMW-A.48 Each
standards with length of barrel 60 cm for - 200 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS 433
49 MAT-01709 BMW-A.49 Each
standards with length of barrel 60 cm for - 200 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS 497
50 MAT-01710 BMW-A.50 Each
standards with length of barrel 60 cm for - 200 x 200
Supply of SWG Junctions (T's & Y's) conforming to IS 583
51 MAT-01711 BMW-A.51 Each
standards with length of barrel 60 cm for - 250 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS 770
52 MAT-01712 BMW-A.52 Each
standards with length of barrel 60 cm for - 250 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS 953
53 MAT-01713 BMW-A.53 Each
standards with length of barrel 60 cm for - 250 x 200
Supply of SWG Junctions (T's & Y's) conforming to IS 1141
54 MAT-01714 BMW-A.54 Each
standards with length of barrel 60 cm for - 250 x 250
Supply of SWG Junctions (T's & Y's) conforming to IS 832
55 MAT-01715 BMW-A.55 Each
standards with length of barrel 60 cm for - 300 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS 1066
56 MAT-01716 BMW-A.56 Each
standards with length of barrel 60 cm for - 300 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS 1299
57 MAT-01717 BMW-A.57 Each
standards with length of barrel 60 cm for - 300 x 200

200
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply of SWG Junctions (T's & Y's) conforming to IS 1533
58 MAT-01718 BMW-A.58 Each
standards with length of barrel 60 cm for - 300 x 250
Supply of SWG Junctions (T's & Y's) conforming to IS 1767
59 MAT-01719 BMW-A.59 Each
standards with length of barrel 60 cm for - 300 x 300
Supply of SWG Junctions (T's & Y's) conforming to IS 1038
60 MAT-01720 BMW-A.60 Each
standards with length of barrel 60 cm for - 350 x 100
Supply of SWG Junctions (T's & Y's) conforming to IS 1331
61 MAT-01721 BMW-A.61 Each
standards with length of barrel 60 cm for - 350 x 150
Supply of SWG Junctions (T's & Y's) conforming to IS 1623
62 MAT-01722 BMW-A.62 Each
standards with length of barrel 60 cm for - 350 x 200
Supply of SWG Junctions (T's & Y's) conforming to IS 1913
63 MAT-01723 BMW-A.63 Each
standards with length of barrel 60 cm for - 350 x 250
Supply of SWG Junctions (T's & Y's) conforming to IS 2207
64 MAT-01724 BMW-A.64 Each
standards with length of barrel 60 cm for - 350 x 300
Supply of SWG Junctions (T's & Y's) conforming to IS 2497
65 MAT-01725 BMW-A.65 Each
standards with length of barrel 60 cm for - 350 x 350
Supply of SWG Plugs conforming to IS standards for 100 30
66 MAT-01726 BMW-A.66 Each
mm dia
Supply of SWG Plugs conforming to IS standards for 150 58
67 MAT-01727 BMW-A.67 Each
mm dia
Supply of SWG Plugs conforming to IS standards for 200 111
68 MAT-01728 BMW-A.68 Each
mm dia
Supply of SWG Plugs conforming to IS standards for 250 192
69 MAT-01729 BMW-A.69 Each
mm dia
Supply of SWG Plugs conforming to IS standards for 300 305
70 MAT-01730 BMW-A.70 Each
mm dia
Supply of SWG Plugs conforming to IS standards for 350 382
71 MAT-01731 BMW-A.71 Each
mm dia
Supplying & fixing 150 mm x 100 mm SWG gully 533
trapsconforming to ISI 651 & 4127 with C.I Grating & Cost.
72 MAT-01732 BMW-A.72 Brick masonry in CM 1:6 prop. Intermediate chamber and Each
fitted with304.8 mm x 288.6mm (12"x9") C.I Frame and
hinged cover
Supply of SWG Gully Traps (Round & Square) conforming 240
73 MAT-01733 BMW-A.73 Each
to IS standards 150 x 100 mm
Labour charges for fixing and laying the SWG Junctions/ 36
74 LAB-00152 BMW-A.74 Plugs/ Bends of any dia with airtight cement joints as per Each
standard practice
Supply of SWG Saddles conforming to IS standards 150 x 170
75 MAT-01734 BMW-A.75
100 mm
Supply of SWG Saddles conforming to IS standards 200 x 293
76 MAT-01735 BMW-A.76
100 mm
Supply of SWG Saddles conforming to IS standards 250 x 474
77 MAT-01736 BMW-A.77
100 mm
MAN HOLES & INSPECTION CHAMBERS -AS PER - IS
B
4111 : Part 1 : 1986

201
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Constructing 904.0 mm (3’0”) dia solid block masonry 6316
inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop usingfly-ash blocks of 225 mm
thick from approved source having a minimum crushing
strength of 10 N/sq.mmincluding plastering with cement
mortar 1:3 prop; ½” thick both inside and outside fitted with
20” dia RCC manhole covers and frames including
78 MAT-05233 BMW-B.01 excavating pits up to a depth of 904 mm (3'-0") in all sorts of Each
soils (excluding rock) and laying cement concrete (1:4:8)
150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4
benching and channel 100 mm thick as per Standard
specification andincluding cost and conveyance of all
materials like cement, sand, bricks, water etc., to site, cost
of seigniorage charges on all materials and all incidental
andoperational, labour charges like mixing cement mortar,
constructing masonry, lift charges, curing etc., complete for
finished item of work as per Standard specification.
Constructing 904.0 mm (3’0”) dia solid block masonry 9940
inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop usingfly-ash blocks of 225 mm
thick from approved source having a minimum crushing
strength of 10 N/sq.mmincluding plastering with cement
mortar 1:3 prop; ½” thick both inside and outside fitted with
20” dia RCC manhole covers and frames including
79 MAT-05234 BMW-B.02 excavating pits up to a depth of 1524 mm (5'-0") in all sorts Each
of soils (excluding rock) and laying cement concrete (1:4:8)
150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4
benching and channel 100 mm thick as per Standard
specification andincluding cost and conveyance of all
materials like cement, sand, bricks, water etc., to site, cost
of seigniorage charges on all materials and all incidental
andoperational, labour charges like mixing cement mortar,
constructing masonry, lift charges, curing etc., complete for
finished item of work as per Standard specification.
Constructing 904.0 mm (3’0”) dia brick masonry inspection 6118
chamber as per IS - 4111: Part-1:1986 with cement mortar
(1:6) prop using 2nd Class Clay Bricks of 225 mm thick from
approved source having a minimum crushing strength of 5
N/sq.mmincluding plastering with cement mortar 1:3 prop;
½” thick both inside and outside fitted with 20” dia RCC
manhole covers and frames including excavating pits up to
80 MAT-05235 BMW-B.03 a depth of 904 mm (3'-0") in all sorts of soils (excluding Each
rock) and laying cement concrete (1:4:8) 150 mm thick
using 40 mm HBG Metal and P.C.C. 1:2:4 benching and
channel 100 mm thick as per Standard specification
andincluding cost and conveyance of all materials like
cement, sand, bricks, water etc., to site, cost of seigniorage
charges on all materials and all incidental andoperational,
labour charges like mixing cement mortar, constructing
masonry, lift charges, curing etc., complete for finished item
of work as per Standard specification.
Constructing 904.0 mm (3’0”) dia brick masonry inspection 9557
chamber as per IS - 4111: Part-1:1986 with cement mortar
81 MAT-05236 BMW-B.04 (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from Each
approved source having a minimum crushing strength of 5
N/sq.mmincluding plastering with cement mortar 1:3 prop;

202
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
½” thick both inside and outside fitted with 20” dia RCC
manhole covers and frames including excavating pits up to
a depth of 1524 mm (5'-0") in all sorts of soils (excluding
rock) and laying cement concrete (1:4:8) 150 mm thick
using 40 mm HBG Metal and P.C.C. 1:2:4 benching and
channel 100 mm thick as per Standard specification
andincluding cost and conveyance of all materials like
cement, sand, bricks, water etc., to site, cost of seigniorage
charges on all materials and all incidental andoperational,
labour charges like mixing cement mortar, constructing
masonry, lift charges, curing etc., complete for finished item
of work as per Standard specification.
Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 5957
82 MAT-01737 BMW-B.05 1:6 prop. Masonry Inspection chamber up to 914.4 mm Each
(3'0") and fitted with light weight 914.4 mm x 457.2 mm
(3'0"x1'6") C.I frame andcover of 40 Kg.
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 3590
83 MAT-01738 BMW-B.06 1:6 prop. Masonry. Inspection chamber up to 914.4 mm Each
(3'0") and fitted with light weight 457.2 mm x 457.2 mm
(1'6"x1'6") C.I frame andcover of 20 Kg.
a)Making drainage connection in the existing inspection
84 MAT-01739 BMW-B.07 Each 119
including all repairs
85 LAB-00157 BMW-B.08 b) - do - labour charges only Each 85
C.I. PIPES & FITTINGS -AS PER - IS 1729:1979 (Materials
C shall be procured from the list of approved Brands/
Manufacturers/ Suppliers)
Supplying and fixing of C.I. Single/ Double Socket soil pipes
ISI marked conforming to IS:1729-1979 of reputed make
with cement caulked joints and fixing as per site
requirements including painting black with Japan paint and
fixing with necessary wooden blocks fixed in the masonry
walls in cement mortar (1½:1) and including fixing of M.S.
clamps if necessary with required no. of Bombay nails etc.,
complete
86 MAT-01740 BMW-C.01 3" dia (76.2 mm) Single Socket 1 RM 753
87 MAT-01741 BMW-C.02 4" dia (101.6mm) Single Socket 1 RM 975
88 MAT-01742 BMW-C.03 6" dia (152.4mm) Single Socket 1 RM 1539
89 MAT-01743 BMW-C.04 3" dia (76.2 mm) Double Socket 1 RM 817
90 MAT-01744 BMW-C.05 4" dia (101.6mm) Double Socket 1 RM 1080
91 MAT-01745 BMW-C.06 6" dia (152.4mm) Double Socket 1 RM 1766
Labour charges only forfixing of C.I. Single/ Double Socket 274
soil pipes of any dia with cement caulked joints and fixing as
92 LAB-00158 BMW-C.07 per site requirements including painting black with Japan 1 RM
paint and fixing with necessary wooden blocks fixed in the
masonry walls in cement mortar and including fixing of M.S.
clamps if necessary with required nails
Supplying & fixing CI Plain bends Ist quality ISI marked 291
93 MAT-01746 BMW-C.08 conforming to IS:1729-1979 with cement caulked joints and Each
fixing as per site requirements with standard practice for3"
dia (76.2 mm)

203
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supplying & fixing CI Plain bends Ist quality ISI marked 365
94 MAT-01747 BMW-C.09 conforming to IS:1729-1979 with cement caulked joints and Each
fixing as per site requirements with standard practice for4"
dia (101.6 mm)
Supplying & fixing CI Plain bends Ist quality ISI marked 598
95 MAT-01748 BMW-C.10 conforming to IS:1729-1979 with cement caulked joints and Each
fixing as per site requirements with standard practice for6"
dia (152.4 mm)
Supplying & fixing CI Plug (Door) bends Ist quality ISI 357
96 MAT-01749 BMW-C.11 marked conforming to IS:1729-1979 with cement caulked Each
joints and fixing as per site requirements with standard
practice for 3" dia (76.2 mm)
Supplying & fixing CI Plug (Door) bends Ist quality ISI 439
97 MAT-01750 BMW-C.12 marked conforming to IS:1729-1979 with cement caulked Each
joints and fixing as per site requirements with standard
practice for 4" dia (101.6 mm)
Supplying & fixing CI Plug (Door) bends Ist quality ISI 946
98 MAT-01751 BMW-C.13 marked conforming to IS:1729-1979 with cement caulked Each
joints and fixing as per site requirements with standard
practice for 6" dia (152.4 mm)
Labour charges only for fixing CI Plain/ Plug (Door) bends 86
99 LAB-00159 BMW-C.14 with cement caulked joints and fixing as per site Each
requirements with standard practice
Supplying and fixing of 76.2 mm (3") CI soil single junction 452
100 MAT-01752 BMW-C.15 with plug : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Supplying and fixing of 101.6 mm (4") CI soil single junction 696
101 MAT-01753 BMW-C.16 with plug : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Supplying and fixing of 152.4 mm (6") CI soil single junction 1626
102 MAT-01754 BMW-C.17 with plug : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Supplying and fixing of 76.2 mm (3") CI soil plain single 382
103 MAT-01755 BMW-C.18 junction : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Supplying and fixing of 101.6 mm (4") CI soil plain single 515
104 MAT-01756 BMW-C.19 junction : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Supplying and fixing of 152.4 mm (6") CI soil plain single 1216
105 MAT-01757 BMW-C.20 junction : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Labour charges only fixing CI soil single junctions with 122
106 LAB-00160 BMW-C.21 cement caulked joints and fixing as per site requirements Each
with standard practice
Supplying and Fixing of 76.2 mm (3") CI soil Double junction 677
107 MAT-01758 BMW-C.22 with plug : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Supplying and Fixing of 101.6 mm (4") CI soil Double 819
108 MAT-01759 BMW-C.23 junction with plug : conforming to IS:1729-1979 with cement Each
caulked joints and fixing

204
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supplying and Fixing of 152.4 mm (6") CI soil Double 1893
109 MAT-01760 BMW-C.24 junction with plug : conforming to IS:1729-1979 with cement Each
caulked joints and fixing
Supplying and Fixing of 76.2 mm (3") CI soil plain Double 587
110 MAT-01761 BMW-C.25 junction : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Supplying and Fixing of 101.6 mm (4") CI soil plain Double 766
111 MAT-01762 BMW-C.26 junction : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Supplying and Fixing of 152.4 mm (6") CI soil plain Double 1774
112 MAT-01763 BMW-C.27 junction : conforming to IS:1729-1979 with cement caulked Each
joints and fixing
Labour charges only fixing CI soil Double junctions with 120
113 LAB-00161 BMW-C.28 cement caulked joints and fixing as per site requirements Each
with standard practice
Supplying and Fixing of 75mm C.I. Offsets Ist quality 287
114 MAT-01764 BMW-C.29 conforming to IS:1729-1979 with cement caulked joints and Each
fixing-for 76.20 mm (3") C.I. Pipe
Supplying and Fixing of 75mm C.I. Offsets Ist quality 399
115 MAT-01765 BMW-C.30 conforming to IS:1729-1979 with cement caulked joints and Each
fixing-for 101.6 mm (4") C.I. Pipe
Supplying and Fixing of 75mm C.I. Offsets Ist quality 860
116 MAT-01766 BMW-C.31 conforming to IS:1729-1979 with cement caulked joints and Each
fixing-for 152.4 mm (6") C.I. Pipe
Supplying and Fixing of 115 mm C.I. Offsets Ist quality 341
117 MAT-01767 BMW-C.32 conforming to IS:1729-1979 with cement caulked joints and Each
fixing- for 76.20 mm (3") C.I. Pipe
Supplying and Fixing of 115 mm C.I. Offsets Ist quality 450
118 MAT-01768 BMW-C.33 conforming to IS:1729-1979 with cement caulked joints and Each
fixing- for 101.6 mm (4") C.I. Pipe
Supplying and Fixing of 115 mm C.I. Offsets Ist quality 881
119 MAT-01769 BMW-C.34 conforming to IS:1729-1979 with cement caulked joints and Each
fixing- for 152.4 mm (6") C.I. Pipe
Supplying and Fixing of 150 mm C.I. Offsets Ist quality 393
120 MAT-01770 BMW-C.35 conforming to IS:1729-1979 with cement caulked joints and Each
fixingfor 76.20 mm (3") C.I. Pipe
Supplying and Fixing of 150 mm C.I. Offsets Ist quality 506
121 MAT-01771 BMW-C.36 conforming to IS:1729-1979 with cement caulked joints and Each
fixingfor 101.6 mm (4") C.I. Pipe
Supplying and Fixing of 150 mm C.I. Offsets Ist quality 1023
122 MAT-01772 BMW-C.37 conforming to IS:1729-1979 with cement caulked joints and Each
fixingfor 152.4 mm (6") C.I. Pipe
Labour charges only fixing CI soil Offsets with cement 54
123 LAB-00162 BMW-C.38 caulked joints and fixing as per site requirements with Each
standard practice
Supplying & fixing CI floor traps 1st quality ISI marked 515
conforming to IS:1729-1979 with C.P. Grating fixing with
124 MAT-01773 BMW-C.39 white cement as per site requirements with standard Each
practicefor nominal dia 75 mm (3") and grating size 165 mm
dia of weight not less than 5.5 Kgs

205
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.).)
Supplying & fixing CI floor traps 1st quality ISI marked with 630
C.P. Grating fixing with white cement as per site
125 MAT-01774 BMW-C.40 requirements with standard practicefornominal dia 100 mm Each
(4") and grating size 100 mm dia of weight not less than 6
Kgs
Supplying & fixing CI floor traps 1st quality ISI marked 320
conforming to IS:1729-1979 with C.P. Grating fixing with
126 MAT-01775 BMW-C.41 white cement as per site requirements with standard Each
practicefor nominal dia 75 mm (3") and grating size 100 mm
dia of weight not less than 4.0 Kgs
Labour charges only for fixing CI Nahany/ Floor traps with 61
127 LAB-00163 BMW-C.42 C.P. Grating fixing with white cement as per site Each
requirements with standard practice
128 MAT-01776 BMW-C.43 Boxing of Nahany traps in RCC floors Each 178

129 MAT-01777 BMW-C.44 Boxing of W.C Trap in R.C.C floors Each 357
Supplying & fixing CI Collars (double socket) Ist quality ISI 169
130 MAT-01778 BMW-C.45 marked conforming to IS:1729-1979 with cement caulked Each
joints and fixing as per site requirements with standard
practice for 76.20 mm (3") C.I. Pipe
Supplying & fixing CI Collars (double socket) Ist quality ISI 213
131 MAT-01779 BMW-C.46 marked conforming to IS:1729-1979 with cement caulked Each
joints and fixing as per site requirements with standard
practice for 101.6 mm (4") C.I. Pipe
Supplying & fixing CI Collars (double socket) Ist quality ISI 612
132 MAT-01780 BMW-C.47 marked conforming to IS:1729-1979 with cement caulked Each
joints and fixing as per site requirements with standard
practice for 152.4 mm (6") C.I. Pipe
VITREOUS CHINAWARE - SANITARY APPLIANCES as
D per IS:2556 – 1974 (Materials shall be procured from the
listof approved Brands/ Manufacturers/ Suppliers)
Supplying & Fixing Indian pattern white glazed W.C 1st 1036
133 MAT-01781 BMW-D.01 quality ISI marked conforming to IS:2556-Part-3-1981 Each
with"P" or "S" trap: 580 mm Long
Supplying & Fixing Indian pattern white glazed W.C 1st 1036
134 MAT-01782 BMW-D.02 quality ISI marked conforming to IS:2556-Part-3-1981 Each
with"P" or "S" trap: 630 mm Long
Labour charges only for fixing Indian patternW.C with"P" or 363
135 LAB-00164 BMW-D.03 Each
"S" trap
Supplying & Fixing Orissa Pan white glazed W.C 1st quality 1551
136 MAT-01783 BMW-D.04 ISI marked conforming to IS:2556-Part-3-1981 with"P" or Each
"S" trap: 580 mm x 440 mmx260mm
Supplying & Fixing Orissa Pan white glazed W.C 1st quality 1626
137 MAT-01784 BMW-D.05 ISI marked conforming to IS:2556-Part-3-1981 with"P" or Each
"S" trap: 630 mm x 450 mm
Labour charges only Fixing Orissa pan W.C with"P" or "S" 454
138 LAB-00165 BMW-D.06 Each
trap
Supplying & Fixing porcelain foot rest for squatting I.W.C. 238
139 MAT-01785 BMW-D.07 (Rectangular pair) of sizes 250 mm x 125 mm x 15 mm thick Pair
each foot rest 1st quality ISI marked conforming to IS:2556-
Part-10:1974

206
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Labour charges only for fixing porcelain foot rest for 83
140 LAB-00166 BMW-D.08 Pair
squatting I.W.C. (Rectangular pair)
Providing Brick masonry seat for Orissa pan/ Indian W.C. 303
141 MAT-01786 BMW-D.09 Each
using 2nd class bricks as per standard practice
Providing Cement Concrete Squatting plate for Orissa pan/ 90
142 MAT-01787 BMW-D.10 Each
Indian W.C. in P.C.C. 1:2:4 as per standard practice
Supplying & Fixing low down porcelain flushing tank 10 Lit 2468
143 MAT-01788 BMW-D.11 Each
Capacitywith internal components
Labour charges only for fixing low down porcelain flushing 635
144 LAB-00167 BMW-D.12 Each
tank with internal components
Supplying and Fixing European ISI Water Closet of 1st 1979
145 MAT-01789 BMW-D.13 quality conforming to IS:2556-Part-2-1973 ofwhite Each
glazedwith 'P'trap
Supplying and Fixing European ISI Water Closet of 1st 1889
146 MAT-01790 BMW-D.14 quality conforming to IS:2556-Part-2-1973 ofwhite Each
glazedwith 'S'trap
Labour charges only for fixing European Water Closet with 318
147 LAB-00168 BMW-D.15 Each
'P' or 'S' trap as per standard practice
Supplying and Fixing best Indian make plastic seat and 850
148 MAT-01791 BMW-D.16 lid for European water closets with rubber or plastic Buffers Each
as per IS 2548-1996
Labour charges only for fixing plastic seat and lid for 92
149 LAB-00169 BMW-D.17 Each
European water closet
Supply, Installation and commissioning approved make floor 9158
mounted Close coupled EWC suit CASCADE model 'P' or
'S' trap with dual flush porcelain cistern fixed on EWC with
150 MAT-01792 BMW-D.18 all internal parts of dual flush cistern, ultra solid seat cover Each
of approvedmake with rubber buffer and cap 15 mm angle
stop cock 450 mm long PVC inter connection pipe wall
flanges all of approved make etc. complete for finished item
of work in all respects:White Colour
Supply, Installation and commissioning approved make floor 13354
mounted Close coupled EWC suit CASCADE model 'P' or
'S' trap with dual flush porcelain cistern fixed on EWC with
151 MAT-01793 BMW-D.19 all internal parts of dual flush cistern, ultra solid seat cover Each
of approvedmake with rubber buffer and cap 15 mm angle
stop cock 450 mm long PVC inter connection pipe wall
flanges all of approved make etc. complete for finished item
of work in all respects: Coloured - Grade - I/ Grade - II
Supply, Installation and commissioning approved make floor 16994
mounted close coupled EWC suit CASCADE model 'P' or 'S'
trap with dual flush porcelain cistern fixed on EWC with all
152 MAT-01794 BMW-D.20 internal parts of dual flush cistern, ultra solid seat cover of Each
approvedmake with rubber buffer and cap 15 mm angle
stop cock 450 mm long PVC inter connection pipe wall
flanges all of approved make etc. complete for finished item
of work in all respects: Special Colour - Grade - III
Supplying & Fixing Indian make Flat Back Wash Hand 2611
153 MAT-01795 BMW-D.21 Basin1st quality conforming to IS:2556-Part-4:1972 with Each
waste fittings like rubber plug, chain,32 mm nominal size
C.P. Fitting with parallel pipe thread conforming to IS:2963-

207
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
1979 and fitted with 15 mm nominal bore Chromium Plated
Pillar Tap of 1st quality Indian make 400 grams or
equivalent complete with standard CI brackets including
wooden block: 660 x 460 mm - Single
C.P. Pillar cock
Supplying & Fixing Indian makeFlat Back Wash Hand 2318
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size
C.P. Fitting with parallel pipe thread conforming to IS:2963-
154 MAT-01796 BMW-D.22 1979 and fitted with 15 mm nominal bore Chromium Plated Each
Pillar Tap of 1st quality Indian make 400 grams or
equivalent complete with standard CI brackets including
wooden block: 630 x 450 mm - Single
C.P. Pillar cock
Supplying & Fixing Indian makeFlat Back Wash Hand 2828
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size
C.P. Fitting with parallel pipe thread conforming to IS:2963-
155 MAT-01797 BMW-D.23 1979 and fitted with 15 mm nominal bore Chromium Plated Each
Pillar Tap of 1st quality Indian make 400 grams Seiko/
Senior/ Nice/ Esso or equivalent complete with standard CI
brackets including wooden block: 630 x 450 mm - Double
C.P. Pillar cock
Supplying & Fixing Indian makeFlat Back Wash Hand 1736
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size
C.P. Fitting with parallel pipe thread conforming to IS:2963-
156 MAT-01798 BMW-D.24 1979 and fitted with 15 mm nominal bore Chromium Plated Each
Pillar Tap of 1st quality Indian make 400 grams Seiko/
Senior/ Nice/ Esso or equivalent complete with standard CI
brackets including wooden block: 550 x 400 mm - Single
C.P. Pillar cock
Supplying & Fixing Indian makeFlat Back Wash Hand 2100
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size
C.P. Fitting with parallel pipe thread conforming to IS:2963-
157 MAT-01799 BMW-D.25 1979 and fitted with 15 mm nominal bore Chromium Plated Each
Pillar Tap of 1st quality Indian make 400 grams Seiko/
Senior/ Nice/ Esso or equivalent complete with standard CI
brackets including wooden block: 550 x 400 mm - Double
C.P. Pillar cock
Supplying & Fixing Indian makeFlat Back Wash Hand 1519
Basin1st quality conforming to IS:2556-Part-4:1972 with
waste fittings like rubber plug, chain,32 mm nominal size
C.P. Fitting with parallel pipe thread conforming to IS:2963-
158 MAT-01800 BMW-D.26 1979 and fitted with 15 mm nominal bore Chromium Plated Each
Pillar Tap of 1st quality Indian make 400 grams Seiko/
Senior/ Nice/ Esso or equivalent complete with standard CI
brackets including wooden block: 450 x 300 mm - Single
C.P. Pillar cock
Supplying & Fixing Indian makeFlat Back Wash Hand 1956
159 MAT-01801 BMW-D.27 Basin1st quality conforming to IS:2556-Part-4:1972 with Each
waste fittings like rubber plug, chain,32 mm nominal size
C.P. Fitting with parallel pipe thread conforming to IS:2963-

208
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
1979 and fitted with 15 mm nominal bore Chromium Plated
Pillar Tap of 1st quality Indian make 400 grams Seiko/
Senior/ Nice/ Esso or equivalent complete with standard CI
brackets including wooden block: 450 x 300 mm - Double
C.P. Pillar cock
Labour charges only for fixing Indian makeFlat Back Wash 384
160 LAB-00170 BMW-D.28 Hand Basin with waste fittings like rubber plug, chain,32 mm Each
nominal size C.P. Fitting Pillar Taps complete with standard
CI brackets including wooden block
Supplying and Fixing Pedestal for Wash Hand Basin 1202
161 MAT-01802 BMW-D.29 Each

162 LAB-00171 BMW-D.30 Labour charges only for fixing pedestal for wash hand basin Each 163

Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) 433
163 MAT-01803 BMW-D.31 Each

Labour charges only for fixing bottle trap to the wash hand 54
164 LAB-00172 BMW-D.32 Each
basin
Supplying & Fixing white glazed flat back Bowl urinals of 898
165 MAT-01804 BMW-D.33 size 440 mm x 265 mm x 315 mm with internal flushing rim Each
fixed with screws complete Indian make conforming to
IS:2556-1995
Supplying & Fixing white glazed flat back half stall urinals 2644
1st quality conforming to IS:2556-1995 with standard C.P.
166 MAT-01805 BMW-D.34 Spreader of overall size 95 x 95 x 57 mm conforming to Each
IS:2556-Part6, Sec-6-1974 fixed with screws complete
Indian make : 410 x 265 x 305 mm
Supplying & Fixing white glazed flat back half stall urinals 2935
1st quality conforming to IS:2556-1995 with standard C.P.
167 MAT-01806 BMW-D.35 Spreader of overall size 95 x 95 x 57 mm conforming to Each
IS:2556-Part6, Sec-6-1974 fixed with screws complete
Indian make : 590 x 375 x 380 mm
Labour charges only Fixing flat back Bowl/ Half stall urinals 153
168 LAB-00173 BMW-D.36 Each
with fixing C.P. Spreader and screws complete
Supplying & Fixing Indian make white glazed vitreous china 4789
porcelain sink conforming to IS:2556-Part-5-1994 on
169 MAT-01807 BMW-D.37 cantilever brackets with waste fittings like rubber plug, Each
chain,32 mm nominal size C.P. Fitting with parallel pipe
thread conforming to IS:2963-1979 : 600 x 400 x 250
Supplying & Fixing Indian make white glazed vitreous china 5371
porcelain sink conforming to IS:2556-Part-5-1994 on
170 MAT-01808 BMW-D.38 cantilever brackets with waste fittings like rubber plug, Each
chain,32 mm nominal size C.P. Fitting with parallel pipe
thread conforming to IS:2963-1979 : 750 x 450 x 250
Labour charges only for fixing Vitreous china porcelain sinks 384
171 LAB-00174 BMW-D.39 with waste fittings, rubber plug, chain, cantilever brackets Each
etc.
a) S & F 609.6 x 457.2 x 254 mmRCC terrazzo finished 781
172 MAT-01809 BMW-D.40 sink(or constructed at site with 50.8mm thick) brass plug Each
and chain including CI cantilever brackets
173 LAB-00175 BMW-D.41 b) - do - labour charges only Each 271

209
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
TAPS & FAUCETS(Materials shall be procured from the list
E
of approved Brands/ Manufacturers/ Suppliers)
MAT-01810 a) S & F 12.7 mm NP stop cock Indian makeheavy duty 450
174 BMW-E.01 Each

LAB-00176 b) - do - labour charges only 35

175 BMW-E.02 Each

MAT-01811 a) S & Fconcealed stop cock 12.7 mm (1/2") Indian Make 515
176 BMW-E.03 Each
heavy duty
LAB-00177 b) - do - labour charges only 52
177 BMW-E.04 Each

MAT-01812 a) S & Fangle stop cock 12.7 mm diafirst quality Indian 453
178 BMW-E.05 Each
Make heavy duty
LAB-00178 b) - do - labour charges only 52
179 BMW-E.06 Each

MAT-01813 a) S&F 12.7 mm N.P bib tap Indian make heavy dutys Long 387
180 BMW-E.07 Each
body
LAB-00179 b) - do - labour charges only 35
181 BMW-E.08 Each

MAT-01814 a) S&F 12.7mm N.P bib tap Indian make 3heavy duty sort 248
182 BMW-E.09 Each
body
LAB-00180 b) - do - labour charges only 35
183 BMW-E.10 Each

MAT-01815 a)S & F 31.75 mm brass plumber Union best Indian first 68
184 BMW-E.11 Each
quality
LAB-00181 b) - do - labour charges only 17
185 BMW-E.12 Each

MAT-01816 a) S & F 12.7 mm brass stop cock Indian make heavy duty 222
186 BMW-E.13 Each
long body
LAB-00182 b) - do - labour charges only 35
187 BMW-E.14 Each

MAT-01817 a) S & F 12.7 mm brass stop cock Indian make heavy duty 196
188 BMW-E.15 Each
short body
LAB-00183 b) - do - labour charges only 35
189 BMW-E.16 Each

MAT-01818 a) S & F 12.7 mm brass bib cock Indian make heavy duty long 222
190 BMW-E.17 Each
body
LAB-00184 b) - do - labour charges only 35
191 BMW-E.18 Each

MAT-01819 a) S & F 12.7 mm brass bib cock Indian make heavy duty 196
192 BMW-E.19 Each
short body
LAB-00185 b) - do - labour charges only 35
193 BMW-E.20 Each

MAT-01820 S & F CP Long body bib cock fancy type deluxe heavy duty 607
194 BMW-E.21 Each
12.7 mm dia Indian make
S & F CP Short body bib cock fancy type deluxeheavy duty 582
195 MAT-01821 BMW-E.22 Each
12.7 mm dia Indian make

210
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
S & F 12.7mm heavy duty dia high neck pillar cock 1st 1102
196 MAT-01822 BMW-E.23 Each
quality Indian make
197 MAT-01823 BMW-E.24 a)S & F 12.7 mm heavy duty NP Swan Neck Pillar cock Each 1102

LAB-00186 b) - do - labour charges only 48

198 BMW-E.25 Each

MAT-01824 a)S & F 12.7 mm heavy duty NP Sink cock 1100

199 BMW-E.26 Each

LAB-00187 b) - do - labour charges only 42

200 BMW-E.27 Each

S&F 12.7 mm dia NP pillar cock heavy duty Ist quality 579
201 MAT-01825 BMW-E.28 Each
Indian make
202 MAT-01826 BMW-E.29 S&F 12.7 mm dia NP push cock Ist quality Each 259

203 MAT-01827 BMW-E.30 S&F 12.7 mm dia NP lift cock Ist quality Each 227

a)S & F 38.1 mm C.Pwaste coupling Half or Full Thread 1st 227
204 MAT-01828 BMW-E.31 Each
Quality Indian make Parryware or equivalent
205 LAB-00188 BMW-E.32 b) - do - labour charges only Each 35

206 MAT-01829 BMW-E.33 a) S & F 31.75 mm PVC bottle trap Each 139

207 LAB-00189 BMW-E.34 b) - do - labour charges only Each 35

208 MAT-01830 BMW-E.35 a)S& F 38.1 mm brass plumber union Each 68

209 LAB-00190 BMW-E.36 b) - do - labour charges only Each 17

a)S & F 19.05 mm heavy duty NP stop cock Indian make 579
210 MAT-01831 BMW-E.37 Each
with ISI mark
211 LAB-00191 BMW-E.38 b) - do - labour charges only Each 35
G.I. PIPES & FITTINGS(Materials shall be procured from
F
the list of approved Brands/ Manufacturers/ Suppliers)
212 MAT-01832 BMW-F.01 S& F GIunion 12.7 mm Ist Quality Each 42

213 MAT-01833 BMW-F.02 S& F GIunion 19.05 mm Ist Quality Each 51

214 MAT-01834 BMW-F.03 S& F GIunion 25.4 mm Ist Quality Each 77

215 MAT-01835 BMW-F.04 S& F GIunion 31.75 mm Ist Quality Each 95

216 MAT-01836 BMW-F.05 S& F GIunion 38.1 mm Ist Quality Each 114

217 MAT-01837 BMW-F.06 S& F GIunion 50.8 mm Ist Quality Each 142

218 MAT-01838 BMW-F.07 S& F GI connector 25.4 mm dia Each 85

219 MAT-01839 BMW-F.08 S& F 12.7 mm GI 'T' A class Ist quality Each 52

220 MAT-01840 BMW-F.09 S& F31.75mm dia GI bend Ist quality Each 77

221 MAT-01841 BMW-F.10 S & F 31.75 mm dia GI 'T' 1st Quality Each 76

a) S & F 25.4 mm copper ball cock ith PVC ball Indian make 448
222 MAT-01842 BMW-F.11 Each
ISI mark
223 LAB-00192 BMW-F.12 b) - do - labour charges only Each 53

a) S & F 19.05 mm copper ball cock ith PVCball Indian 367

224 MAT-01843 BMW-F.13 Each
make ISI mark
225 LAB-00193 BMW-F.14 b) - do - labour charges only Each 48

211
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
a)S & F 12.7 mm copper ball cock ith PVC ball Indian make 241
226 MAT-01844 BMW-F.15 Each
ISI mark
227 LAB-00194 BMW-F.16 b) - do - labour charges only Each 53

a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 1165
228 MAT-01845 BMW-F.17 Each
Class - I, Indian make heavy type - 25 mm NB Size
229 LAB-00195 BMW-F.18 b) - do - labour charges only Each 53
MAT-01846 a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 812
230 BMW-F.19 Each
Class - I, Indian make heavy type - 20 mm NB Size
231 LAB-00196 BMW-F.20 b) - do - labour charges only Each 53

a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 604
232 MAT-01847 BMW-F.21 Each
Class - I, Indian make heavy type - 15 mm NB Size
233 LAB-00197 BMW-F.22 b) - do - labour charges only Each 53

a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 1768
234 MAT-01848 BMW-F.23 Each
Class - I, Indian make heavy type - 32 mm NB Size
235 LAB-00198 BMW-F.24 b) - do - labour charges only Each 46

a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 2389
236 MAT-01849 BMW-F.25 Each
Class - I, Indian make heavy type - 40 mm NB Size

237 LAB-00199 BMW-F.26 b) - do - labour charges only Each 80

a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 3498
238 MAT-01850 BMW-F.27 Each
Class - I, Indian make heavy type - 50 mm NB Size
239 LAB-00200 BMW-F.28 b) - do - labour charges only Each 107

a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 5398
240 MAT-01851 BMW-F.29 Each
Class - I, Indian make heavy type - 65 mm NB Size
241 LAB-00201 BMW-F.30 b) - do - labour charges only Each 127

a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 7995
242 MAT-01852 BMW-F.31 Each
Class - I, Indian make heavy type - 80 mm NB Size
243 LAB-00202 BMW-F.32 b) - do - labour charges only Each 158

a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non 450

244 MAT-01853 BMW-F.33 return) Valve as per IS-778 I-class heavy duty - 15 mm NB Each
Size
245 LAB-00203 BMW-F.34 b) - do - labour charges only Each 66

a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non 1019

246 MAT-01854 BMW-F.35 return) Valve as per IS-778 I-class heavy duty - 25 mm NB Each
Size
247 LAB-00204 BMW-F.36 b) - do - labour charges only Each 80

a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non 2069

248 MAT-01855 BMW-F.37 return) Valve as per IS-778 I-class heavy duty - 40 mm NB Each
Size
249 LAB-00205 BMW-F.38 b) - do - labour charges only Each 134

a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non 2825

250 MAT-01856 BMW-F.39 return) Valve as per IS-778 I-class heavy duty - 50 mm NB Each
Size
251 LAB-00206 BMW-F.40 b) - do - labour charges only Each 135

252 MAT-01857 BMW-F.41 a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non Each 653

212
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
return) Valve as per IS-778 I-class heavy duty - 20 mm NB
Size
253 LAB-00207 BMW-F.42 b) - do - labour charges only Each 65

a) Supplying & fixing Gunmetal (GM) Vertical Check (Non 424

254 MAT-01858 BMW-F.43 return) Valve as per IS-778 I-class heavy duty - 15 mm NB Each
Size

255 LAB-00208 BMW-F.44 b) - do - labour charges only Each 65

a) Supplying & fixing Gunmetal (GM) Vertical Check (Non 550

256 MAT-01859 BMW-F.45 return) Valve as per IS-778 I-class heavy duty - 20 mm NB Each
Size
257 LAB-00209 BMW-F.46 b) - do - labour charges only Each 65

a) Supplying & fixing Gunmetal (GM) Vertical Check (Non 826

258 MAT-01860 BMW-F.47 return) Valve as per IS-778 I-class heavy duty - 25 mm NB Each
Size
259 LAB-00210 BMW-F.48 b) - do - labour charges only Each 65

a) Supplying & fixing Gunmetal (GM) Vertical Check (Non 1135

260 MAT-01861 BMW-F.49 return) Valve as per IS-778 I-class heavy duty - 32 mm NB Each
Size
261 LAB-00211 BMW-F.50 b) - do - labour charges only Each 65

a) Supplying & fixing Gunmetal (GM) Vertical Check (Non 1370

262 MAT-01862 BMW-F.51 return) Valve as per IS-778 I-class heavy duty - 40 mm NB Each
Size
263 LAB-00212 BMW-F.52 b) - do - labour charges only Each 102

a) Supplying & fixing Gunmetal (GM) Vertical Check (Non 2168

264 MAT-01863 BMW-F.53 return) Valve as per IS-778 I-class heavy duty - 50 mm NB Each
Size
265 LAB-00213 BMW-F.54 b) - do - labour charges only Each 65

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS 456
266 MAT-01864 BMW-F.55 Spindle as per IS - Class - I, Indian make heavy type - 15 Each
mm NB Size
267 LAB-00214 BMW-F.56 b) - do - labour charges only Each 65

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS 592
268 MAT-01865 BMW-F.57 Spindle as per IS - Class - I, Indian make heavy type - 20 Each
mm NB Size
269 LAB-00215 BMW-F.58 b) - do - labour charges only Each 65

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS 864
270 MAT-01866 BMW-F.59 Spindle as per IS - Class - I, Indian make heavy type - 25 Each
mm NB Size
271 LAB-00216 BMW-F.60 b) - do - labour charges only Each 65

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS 1563
272 MAT-01867 BMW-F.61 Spindle as per IS - Class - I, Indian make heavy type - 32 Each
mm NB Size
273 LAB-00217 BMW-F.62 b) - do - labour charges only Each 65

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS 2340
274 MAT-01868 BMW-F.63 Spindle as per IS - Class - I, Indian make heavy type - 40 Each
mm NB Size

213
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
275 LAB-00218 BMW-F.64 b) - do - labour charges only Each 2395

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS 4073
276 MAT-01869 BMW-F.65 Spindle as per IS - Class - I, Indian make heavy type - 50 Each
mm NB Size
277 LAB-00219 BMW-F.66 b) - do - labour charges only Each 65

a) S& F 15 mm Nominal Bore GI pipe Light Grade 180

278 MAT-05237 BMW-F.67 properties & weight as per IS 1239 ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
279 LAB-00221 BMW-F.68 b) - do - labour charges only 1 RM 49

a) S& F 20 mm Nominal Bore GI pipe Light Grade 205

280 MAT-05238 BMW-F.69 properties & weight as per IS 1239ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
281 LAB-00223 BMW-F.70 b) - do - labour charges only 1 RM 49

a) S& F 25 mm Nominal Bore GI pipe Light Grade 268

282 MAT-05239 BMW-F.71 properties & weight as per IS 1239ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
283 LAB-00225 BMW-F.72 b) - do - labour charges only 1 RM 49

a) S& F 32 mm Nominal Bore GI pipe Light Grade 37

284 MAT-05240 BMW-F.73 properties & weight as per IS 1239ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
285 LAB-00227 BMW-F.74 b) - do - labour charges only 1 RM 49

a) S& F 40 mm Nominal Bore GI pipe Light Grade 417

286 MAT-05241 BMW-F.75 properties & weight as per IS 1239 ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
287 LAB-00229 BMW-F.76 b) - do - labour charges only 1 RM 53

a) S& F 50 mm Nominal Bore GI pipe Light Grade 457

288 MAT-05242 BMW-F.77 properties & weight as per IS 1239 ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
289 LAB-00231 BMW-F.78 b) - do - labour charges only 1 RM 80

a) S& F 15 mm Nominal Bore GI pipe Medium Grade 199

290 MAT-05243 BMW-F.79 properties & weight as per IS 1239 ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
291 LAB-00233 BMW-F.80 b) - do - labour charges only 1 RM 49

a) S& F 20 mm Nominal Bore GI pipe Medium Grade 220

292 MAT-05244 BMW-F.81 properties & weight as per IS 1239ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
293 LAB-00235 BMW-F.82 b) - do - labour charges only 1 RM 49
a) S& F 25 mm Nominal Bore GI pipe Medium Grade 286
294 MAT-05245 BMW-F.83 1 RM
properties & weight as per IS 1239ISI mark with GI fittings

214
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
including the cost of pipe & its fittings & labour charges
complete
295 LAB-00237 BMW-F.84 b) - do - labour charges only 1 RM 49

a) S& F 32 mm Nominal Bore GI pipe Medium Grade 398

296 MAT-05246 BMW-F.85 properties & weight as per IS 1239ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
297 LAB-00239 BMW-F.86 b) - do - labour charges only 1 RM 49

a) S& F 40 mm Nominal Bore GI pipe Medium Grade 444

298 MAT-05247 BMW-F.87 properties & weight as per IS 1239 ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
299 LAB-00241 BMW-F.88 b) - do - labour charges only 1 RM 53
a) S& F 50 mm Nominal Bore GI pipe Medium Grade 484
300 MAT-05248 BMW-F.89 properties & weight as per IS 1239 ISI mark with GI fittings 1 RM
including the cost of pipe & its fittings & labour charges
complete
301 LAB-00243 BMW-F.90 b) - do - labour charges only 1 RM 81

S & F 65 mm Nominal Bore GI pipe Medium Grade 837

properties & weight as per IS 1239 with GI fittings such as
302 MAT-01870 BMW-F.91 elbows tees couplings, nipples, plugs including excavation 1 RM
for trenches and refilling the trenches complete except for
GI bends union and GI connectors with checkout and socket
Tata or Zenith make or equivalent.
303 MAT-01871 BMW-F.92 a)S & F 12.7 mm holder bat clamps Each 14

304 LAB-00244 BMW-F.93 b) - do - labour charges only Each 10

305 MAT-01872 BMW-F.94 a)S & F 19.05 mm holder bat clamps Each 21

306 LAB-00245 BMW-F.95 b) - do - labour charges only Each 10

307 MAT-01873 BMW-F.96 a)S & F 25.4 mm holder bat clamps Each 28

308 LAB-00246 BMW-F.97 b) - do - labour charges only Each 10

309 MAT-01874 BMW-F.98 a)S & F 38.1 mm holder bat clamps Each 31

310 LAB-00247 BMW-F.99 b) - do - labour charges only Each 12

BMW- a) S& F12.7x 152.0 mm NP shower rose heavy 179

311 MAT-01875 Each
F.100
BMW- b) - do - labour charges only 23
312 LAB-00248 Each
F.101
BMW- a) S& F12.7x 137.0 mm NP shower rose heavy 171
313 MAT-01876 Each
F.102
BMW- b) - do - labour charges only 25
314 LAB-00249 Each
F.103
BMW- a) S& F12.7x 101.6 mm NP shower rose heavy 163
315 MAT-01877 Each
F.104
BMW- b) - do - labour charges only 27
316 LAB-00250 Each
F.105
317 MAT-01878 BMW- a) S & F 12.7 x 88.9 CP fancy shower Each 288

215
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
F.106
BMW- b) - do - labour charges only 27
318 LAB-00251 Each
F.107
BMW- a) Supplying & fixing 12.7 mm GI drain pipe with plug for 48
319 MAT-01879 Each
F.108 tanks (Mud valve) including making a hole
BMW- b) - do - labour charges only 27
320 LAB-00252 Each
F.109
BMW- a) Supplying & fixing 19.05 mm GI drain pipe with plug for 68
321 MAT-01880 Each
F.110 tanks (Mud valve) including making a hole
BMW- b) - do - labour charges only 25
322 LAB-00253 Each
F.111
BMW- a) Supplying & fixing 25.4 mm GI drain pipe with plug for 79
323 MAT-01881 Each
F.112 tanks (Mud valve) including making a hole
BMW- b) - do - labour charges only 28
324 LAB-00254 Each
F.113
a) Taking branch water connection from the existing 25.4 152
325 MAT-01882 BMW- Each
mm GIpipe including cutting threading, etc, complete with
F.114
fitting
BMW- b) - do - labour charges only 28
326 LAB-00255 Each
F.115
a) Taking branch water connection from the existing 19.05 88
327 MAT-01883 BMW- Each
mm GIpipe including cutting threading, etc, complete with
F.116
fitting,
BMW- b) - do - labour charges only 44
328 LAB-00256 Each
F.117
a) Taking branch water connection from the existing 12.7 67
329 MAT-01884 BMW- Each
mm GIpipe including cutting threading, etc, complete with
F.118
fitting,
BMW- b) - do - labour charges only 37
330 LAB-00257 Each
F.119
BMW- Supplying & fixing leather washers for 12.7 mm bib tap and 1
331 MAT-01885 Each
F.120 stop cock
BMW- Supplying & fixing leather washers for 19.05 mm bib tap 3
332 MAT-01886 Each
F.121 and stop cock
BMW- Supplying & Fixing 12.7 mm fibre washers 3
333 MAT-01887 Each
F.122
BMW- Supplying & Fixing 19.05 mm fibre washers 3
334 MAT-01888 Each
F.123
PVC PIPES & FITTINGS(Materials shall be procured from
G
the list of approved Brands/ Manufacturers/ Suppliers)
a) Providing & Placing on Terrace(at all floor levels) 8.5
polyethylene water storage tank of Double layer Roto
335 MAT-01889 BMW-G.01 moulded confirming to IS:12701 approved brand & 1 Lit
manufacture with suitable cover/cap and suitable locking
arrangement & making necessary holes for inlet & outlets
and over flow pipes but without fittings & base support for
tanks
336 LAB-00258 BMW-G.02 b) - do - labour charges only 1 Lit 1

216
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
337 MAT-01890 BMW-G.03 Supply of Plastic storage tank lid with hinges Each 70

338 MAT-01891 BMW-G.04 Supply & Fixing 76.2 mm dia PVC elbow Ist quality Each 45

Supply & fixing 31.75mm dia PVC flexible waste pipe of 24

339 MAT-01892 BMW-G.05 Each
914.4 mm length of Ist quality
340 MAT-01893 BMW-G.06 Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet Each 86
341 MAT-01894 BMW-G.07 Supply & fixing Fancy PVC shelf including all fittings Each 203

Supply & fixing of PVC low level systemwith internal 1390

342 MAT-01895 BMW-G.08 Each
components & short bend:10 Litres capacity Single Flush
Supply & fixing of PVC low level systemwith internal 1632
343 MAT-01896 BMW-G.09 Each
components & short bend:10 litres capacity Dual Flush
Supply & fixing of PVC low level systemwith internal 786
344 MAT-01897 BMW-G.10 Each
components & short bend:8 Litres capacity single Flush
345 MAT-01898 BMW-G.11 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 236

346 MAT-01899 BMW-G.12 90 mm dia 3 M single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 375

347 MAT-01900 BMW-G.13 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 447

348 MAT-01901 BMW-G.14 75 mm dia 3 MDouble Socket PVC/SWR pipe - 4 Kg/sq.cm Each 267

349 MAT-01902 BMW-G.15 90 mm dia 3 MDouble Socket PVC/SWR pipe - 4 Kg/sq.cm Each 425

350 MAT-01903 BMW-G.16 110 mm dia 3 MDouble Socket PVC/SWR pipe - 4 Kg/sq.cm Each 520

75 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe 166

351 MAT-01904 BMW-G.17 Each
- 4 Kg/sq.cm
90 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe 255
352 MAT-01905 BMW-G.18 Each
- 4 Kg/sq.cm
110 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR 318
353 MAT-01906 BMW-G.19 Each
pipe - 4 Kg/sq.cm
75 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR 176
354 MAT-01907 BMW-G.20 Each
pipe - 4 Kg/sq.cm
90 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR 272
355 MAT-01908 BMW-G.21 Each
pipe - 4 Kg/sq.cm
110 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR 329
356 MAT-01909 BMW-G.22 Each
pipe - 4 Kg/sq.cm
75 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe 121
357 MAT-01910 BMW-G.23 Each
- 4 Kg/sq.cm
90 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe 187
358 MAT-01911 BMW-G.24 Each
- 4 Kg/sq.cm
110 mm dia 1219. mm (4'-0") Double Socket PVC/SWR 225
359 MAT-01912 BMW-G.25 Each
pipe - 4 Kg/sq.cm
75 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 103
360 MAT-01913 BMW-G.26 Each
4 Kg/sq.cm
90 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 151
361 MAT-01914 BMW-G.27 Each
4 Kg/sq.cm
110 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe 194
362 MAT-01915 BMW-G.28 Each
- 4 Kg/sq.cm
75 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe - 62
363 MAT-01916 BMW-G.29 Each
4 Kg/sq.cm

217
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
90 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe - 104
364 MAT-01917 BMW-G.30 Each
4 Kg/sq.cm
110 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe 130
365 MAT-01918 BMW-G.31 Each
- 4 Kg/sq.cm
160 MM dia 3 M Double Socket PVC/SWR pipe - 4 1066
366 MAT-01919 BMW-G.32 Each
Kg/sq.cm
367 MAT-01920 BMW-G.33 75 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 400

368 MAT-01921 BMW-G.34 90 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 644

369 MAT-01922 BMW-G.35 110 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 765

370 MAT-01923 BMW-G.36 75 mm dia 3 MDouble Socket PVC/SWR pipe - 6 Kg/sq.cm Each 437

371 MAT-01924 BMW-G.37 90 mm dia 3 MDouble Socket PVC/SWR pipe - 6 Kg/sq.cm Each 693

372 MAT-01925 BMW-G.38 110 mm dia 3 MDouble Socket PVC/SWR pipe - 6 Kg/sq.cm Each 845

75 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe 263

373 MAT-01926 BMW-G.39 Each
- 6 Kg/sq.cm
90 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe 407
374 MAT-01927 BMW-G.40 Each
- 6 Kg/sq.cm
110 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR 485
375 MAT-01928 BMW-G.41 Each
pipe - 6 Kg/sq.cm
75 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR 280
376 MAT-01929 BMW-G.42 Each
pipe - 6 Kg/sq.cm
90 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR 425
377 MAT-01930 BMW-G.43 Each
pipe - 6 Kg/sq.cm
110 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR 524
378 MAT-01931 BMW-G.44 Each
pipe - 6 Kg/sq.cm
75 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe 190
379 MAT-01932 BMW-G.45 Each
- 6 Kg/sq.cm
90 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe 294
380 MAT-01933 BMW-G.46 Each
- 6 Kg/sq.cm
110 mm dia 1219. mm (4'-0") Double Socket PVC/SWR 358
381 MAT-01934 BMW-G.47 Each
pipe - 6 Kg/sq.cm
75 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 164
382 MAT-01935 BMW-G.48 Each
6 Kg/sq.cm
90 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 240
383 MAT-01936 BMW-G.49 Each
6 Kg/sq.cm
110 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe 291
384 MAT-01937 BMW-G.50 Each
- 6 Kg/sq.cm
75 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe - 106
385 MAT-01938 BMW-G.51 Each
6 Kg/sq.cm
90 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe - 165
386 MAT-01939 BMW-G.52 Each
6 Kg/sq.cm
110 mm dia 609.6mm (2'-0") Double Socket PVC/SWR pipe 210
387 MAT-01940 BMW-G.53 Each
- 6 Kg/sq.cm
160 mm dia 3 M Double Socket PVC/SWR pipe - 6 1743
388 MAT-01941 BMW-G.54 Each
Kg/sq.cm

218
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
75 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe 46
389 MAT-01942 BMW-G.55 Each
fittings
90 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe 64
390 MAT-01943 BMW-G.56 Each
fittings
110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe 77
391 MAT-01944 BMW-G.57 Each
fittings
75 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe 62
392 MAT-01945 BMW-G.58 Each
fittings
90 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe 87
393 MAT-01946 BMW-G.59 Each
fittings
110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe 100
394 MAT-01947 BMW-G.60 Each
fittings
395 MAT-01948 BMW-G.61 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 36

396 MAT-01949 BMW-G.62 90 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 50
397 MAT-01950 BMW-G.63 110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 64

398 MAT-01951 BMW-G.64 75 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 62

399 MAT-01952 BMW-G.65 90 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 90

400 MAT-01953 BMW-G.66 110 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 109

401 MAT-01954 BMW-G.67 75 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 55

402 MAT-01955 BMW-G.68 90 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 82

403 MAT-01956 BMW-G.69 110 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 100

404 MAT-01957 BMW-G.70 75 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Each 67

405 MAT-01958 BMW-G.71 90 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Each 100

110 mm dia - Single Tee with Door - UPVC/SWR Pipe 120

406 MAT-01959 BMW-G.72 Each
fittings
407 MAT-01960 BMW-G.73 75 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 105

408 MAT-01961 BMW-G.74 90 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 169

409 MAT-01962 BMW-G.75 110 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 200

75 mm dia - Double Tee with Door - UPVC/SWR Pipe 140

410 MAT-01963 BMW-G.76 Each
fittings
90 mm dia - Double Tee with Door - UPVC/SWR Pipe 265
411 MAT-01964 BMW-G.77 Each
fittings
110 mm dia - Double Tee with Door - UPVC/SWR Pipe 258
412 MAT-01965 BMW-G.78 Each
fittings
413 MAT-01966 BMW-G.79 75 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 69

414 MAT-01967 BMW-G.80 90 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 109

415 MAT-01968 BMW-G.81 110 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 126

416 MAT-01969 BMW-G.82 75 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 87

417 MAT-01970 BMW-G.83 90 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 138

418 MAT-01971 BMW-G.84 110 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 159

419 MAT-01972 BMW-G.85 75 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 93

219
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
420 MAT-01973 BMW-G.86 90 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 146

421 MAT-01974 BMW-G.87 110 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 166

422 MAT-01975 BMW-G.88 75 mm dia - Double 'Y' with Door - UPVC/SWR Pipe fittings Each 122

423 MAT-01976 BMW-G.89 90 mm dia - Double 'Y' with Door - UPVC/SWR Pipe fittings Each 190

110 mm dia - Double 'Y' with Door - UPVC/SWR Pipe 214

424 MAT-01977 BMW-G.90 Each
fittings
425 MAT-01978 BMW-G.91 75 mm dia - Coupler - UPVC/SWR Pipe fittings Each 33

426 MAT-01979 BMW-G.92 90 mm dia - Coupler - UPVC/SWR Pipe fittings Each 47

427 MAT-01980 BMW-G.93 110 mm dia - Coupler - UPVC/SWR Pipe fittings Each 53

428 MAT-01981 BMW-G.94 90 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Each 55

429 MAT-01982 BMW-G.95 110 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Each 53

430 MAT-01983 BMW-G.96 90 x 110mm dia - Reducer - UPVC/SWR Pipe fittings Each 74

431 MAT-01984 BMW-G.97 63 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 8
432 MAT-01985 BMW-G.98 75 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 13

433 MAT-01986 BMW-G.99 90 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 16

BMW- 110 mm dia - Vent Cowl - UPVC/SWR Pipe fittings 18

434 MAT-01987 Each
G.100
BMW- 40 mm dia - Pipe Clip - UPVC/SWR Pipe fittings - Pipe Clip 9
435 MAT-01988 Each
G.101 - UPVC/SWR Pipe fittings
BMW- 50 mm dia - Pipe Clip - UPVC/SWR Pipe fittings 13
436 MAT-01989 Each
G.102
BMW- 63 mm dia - Pipe Clip - UPVC/SWR Pipe fittings 13
437 MAT-01990 Each
G.103
BMW- 75 mm dia - Pipe Clip - UPVC/SWR Pipe fittings 15
438 MAT-01991 Each
G.104
BMW- 90 mm dia - Pipe Clip - UPVC/SWR Pipe fittings 16
439 MAT-01992 Each
G.105
BMW- 110 mm - Pipe Clip - UPVC/SWR Pipe fittings 17
440 MAT-01993 Each
G.106
BMW- 160 mm dia - Pipe Clip - UPVC/SWR Pipe fittings 33
441 MAT-01994 Each
G.107
BMW- P' Trap ( Small without Air vent ) 110 mm - UPVC/SWR 173
442 MAT-01995 Each
G.108 Pipe fittings
BMW- P' Trap ( Small with Air vent ) 110 mm - UPVC/SWR Pipe 192
443 MAT-01996 Each
G.109 fittings
BMW- P' Trap (Big with Air vent ) 110 mm - UPVC/SWR Pipe 219
444 MAT-01997 Each
G.110 fittings
BMW- P' Trap ( Big without Air vent ) 110 mm - UPVC/SWR Pipe 202
445 MAT-01998 Each
G.111 fittings
BMW- Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings 210
446 MAT-01999 Each
G.112
BMW- Bell Mouth Trap 7 " ( 177.8 mm) - UPVC/SWR Pipe fittings 305
447 MAT-02000 Each
G.113

220
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
BMW- 4" (101.6 mm ) Nahany Trap ( Without Jali with 90
448 MAT-02001 Each
G.114 inlet)UPVC/SWR Pipe fittings
BMW- 3" (76.2 mm ) Nahany Trap ( without Jali without 81
449 MAT-02002 Each
G.115 inlet)UPVC/SWR Pipe fittings
BMW- 4" (101.6 mm ) Nahany Trap ( without inlet with out 90
450 MAT-02003 Each
G.116 Jali)UPVC/SWR Pipe fittings
BMW- Mini Trap - UPVC/SWR Pipe fittings 49
451 MAT-02004 Each
G.117
BMW- 3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe 93
452 MAT-02005 Each
G.118 fittings
BMW- 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe 133
453 MAT-02006 Each
G.119 fittings
BMW- 4" (101.6) multi floor trap with out Jalli- UPVC/SWR Pipe 104
454 MAT-02007 Each
G.120 fittings
BMW- Round Jali - UPVC/SWR Pipe fittings 22.
455 MAT-02008 Each
G.121
BMW- Square tile & Jalli - UPVC/SWR Pipe fittings 36
456 MAT-02009 Each
G.122
BMW- Pipe connector( with LIP ring) - UPVC/SWR Pipe fittings 133
457 MAT-02010 Each
G.123
BMW- Pipe connector( with out LIP ring) - UPVC/SWR Pipe fittings 108
458 MAT-02011 Each
G.124
BMW- 4" (101.6 mm ) Floor Trap - UPVC/SWR Pipe fittings 128
459 MAT-02012 Each
G.125
BMW- 5" (127.mm ) floor Trap - UPVC/SWR Pipe fittings 135.
460 MAT-02013 Each
G.126
BMW- 75 mm dia - Door cap - UPVC/SWR Pipe fittings 34
461 MAT-02014 Each
G.127
BMW- 90 mm dia - Door cap - UPVC/SWR Pipe fittings 59
462 MAT-02015 Each
G.128
BMW- 110 mm dia - Door cap - UPVC/SWR Pipe fittings 49
463 MAT-02016 Each
G.129
BMW- 75 mm dia - Socket plug - UPVC/SWR Pipe fittings 33
464 MAT-02017 Each
G.130
BMW- 90 mm dia - Socket plug - UPVC/SWR Pipe fittings 57
465 MAT-02018 Each
G.131
BMW- 110 mm dia - Socket plug - UPVC/SWR Pipe fittings 59
466 MAT-02019 Each
G.132
BMW- 75 mm dia - Rubber ring for Socket - UPVC/SWR Pipe 7
467 MAT-02020 Each
G.133 fittings
BMW- 90 mm dia - Rubber ring for Socket - UPVC/SWR Pipe 8
468 MAT-02021 Each
G.134 fittings
BMW- 110 mm dia - Rubber ring for Socket - UPVC/SWR Pipe 9
469 MAT-02022 Each
G.135 fittings
BMW- 75 mm dia - Door Socket - UPVC/SWR Pipe fittings 8
470 MAT-02023 Each
G.136

221
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
BMW- 90 mm dia - Door Socket - UPVC/SWR Pipe fittings 9
471 MAT-02024 Each
G.137
BMW- 110 mm dia - Door Socket - UPVC/SWR Pipe fittings 13
472 MAT-02025 Each
G.138
BMW- LIP ring 110 mm - UPVC/SWR Pipe fittings 63
473 MAT-02026 Each
G.139
BMW- Rubber Lubricant - 100 Grams 24
474 MAT-02027 Each
G.140
BMW- Rubber Lubricant- 250Grams 47
475 MAT-02028 Each
G.141
BMW- Rubber Lubricant - 500 Grams 85
476 MAT-02029 Each
G.142
BMW- Rubber Lubricant - 1000 Grams 202
477 MAT-02030 Each
G.143
BMW- P' Trap with lip UPVC/SWR Pipe fittings 275
478 MAT-02031 Each
G.144

BMW- 50 ml - Solvent Cement 15

479 MAT-02032 Each
G.145
BMW- 100 ml - Solvent Cement 23
480 MAT-02033 Each
G.146
BMW- 250 ml - Solvent Cement 55
481 MAT-02034 Each
G.147
BMW- 500 ml - Solvent Cement 107
482 MAT-02035 Each
G.148
BMW- 1000 ml - Solvent Cement 210
483 MAT-02036 Each
G.149
BMW- 110mm x 90 mm - Internal Reducer - UPVC/SWR Pipe 83
484 MAT-02037 Each
G.150 fittings
BMW- 160 mm x 110 mm - Internal Reducer - UPVC/SWR Pipe 208
485 MAT-02038 Each
G.151 fittings
Labour charges for laying, fixing and commissioning the 84
BMW- PVC pipes including couplers/ bends/ tees etc any diameter
486 LAB-00259 including fixing necessary fittings like bends, plugs, 1 RM
G.152
couplers, junctions, tees, etc with solvent jointing as per
standard practice
CENTRIFUGAL CAST IRON PIPES & FITTNGS AS PER
H
IS: 3989 - 1984
487 MAT-02039 BMW-H.01 75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 1387

488 MAT-02040 BMW-H.02 100 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 1847

489 MAT-02041 BMW-H.03 150 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 3384

75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) 1539

490 MAT-02042 BMW-H.04 Each
Double socket
100 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) 2077
491 MAT-02043 BMW-H.05 Each
Double socket
492 MAT-02044 BMW-H.06 75 mm dia 9'-0" (2743.2 mm) CI (Spun) pipes Each 1247

222
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
493 MAT-02045 BMW-H.07 100 mm dia 9'-0" (2743.2 mm) CI (Spun) pipes Each 1666

494 MAT-02046 BMW-H.08 75 mm dia 8'-0" (2438.4 mm) CI (Spun) pipes Each 1116

495 MAT-02047 BMW-H.09 100 mm dia 8'-0" (2438.4 mm) CI (Spun) pipes Each 1483

496 MAT-02048 BMW-H.10 75 mm dia 6'-0" (1828.8 mm) CI (Spun) pipes Each 907

497 MAT-02049 BMW-H.11 100 mm dia 6'-0" (1828.8 mm) CI (Spun) pipes Each 1183

75 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) 954

498 MAT-02050 BMW-H.12 Each
pipes
100 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) 1183
499 MAT-02051 BMW-H.13 Each
pipes
75 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) 331
500 MAT-02052 BMW-H.14 Each
fittings
100 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) 380
501 MAT-02053 BMW-H.15 Each
fittings
75 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) 474
502 MAT-02054 BMW-H.16 Each
fittings
100 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) 545
503 MAT-02055 BMW-H.17 Each
fittings
150 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) 1040
504 MAT-02056 BMW-H.18 Each
fittings
75 mm diaCut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) 654
505 MAT-02057 BMW-H.19 Each
fittings
100 mm diaCut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) 721
506 MAT-02058 BMW-H.20 Each
fittings
150 mm diaCut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) 1303
507 MAT-02059 BMW-H.21 Each
fittings
75 mm diaCut pipes (pieces ) 3 feet (914.4 mm) CI (Spun) 1003
508 MAT-02060 BMW-H.22 Each
fittings
100 mm diaCut pipes (pieces ) 3 feet (914.4 mm) CI (Spun) 1353
509 MAT-02061 BMW-H.23 Each
fittings
75 mm dia Cut pipes (pieces ) 4 feet (1219.2 mm) CI (Spun) 1103
510 MAT-02062 BMW-H.24 Each
fittings
100 mm dia Cut pipes (pieces ) 4 feet (1219.2 mm) CI 1650
511 MAT-02063 BMW-H.25 Each
(Spun) fittings
512 MAT-02064 BMW-H.26 75 mm dia Plain Bend - CI (Spun) fittings Each 340

513 MAT-02065 BMW-H.27 100 mm dia Plain Bend - CI (Spun) fittings Each 401

514 MAT-02066 BMW-H.28 150 mm dia Plain Bend - CI (Spun) fittings Each 954

515 MAT-02067 BMW-H.29 75 mm dia Door Bend - CI (Spun) fittings Each 353

516 MAT-02068 BMW-H.30 100 mm dia Door Bend - CI (Spun) fittings Each 457

517 MAT-02069 BMW-H.31 150 mm dia Door Bend - CI (Spun) fittings Each 1045

518 MAT-02070 BMW-H.32 75 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 340

519 MAT-02071 BMW-H.33 100 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 401

520 MAT-02072 BMW-H.34 150 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 954

521 MAT-02073 BMW-H.35 75 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 353

223
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
522 MAT-02074 BMW-H.36 100 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 457

523 MAT-02075 BMW-H.37 150 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 1045

Horn Bend Plain 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI 693
524 MAT-02076 BMW-H.38 Each
(Spun) fittings
Horn Bend door 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI 810
525 MAT-02077 BMW-H.39 Each
(Spun) fittings
526 MAT-02078 BMW-H.40 75 mm dia Heel Rest Bend - CI (Spun) fittings Each 362.

527 MAT-02079 BMW-H.41 100 mm dia Heel Rest Bend - CI (Spun) fittings Each 463
528 MAT-02080 BMW-H.42 150 mm dia Heel Rest Bend - CI (Spun) fittings Each 985

529 MAT-02081 BMW-H.43 75 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 457

530 MAT-02082 BMW-H.44 100 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 616

531 MAT-02083 BMW-H.45 150 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 1272

532 MAT-02084 BMW-H.46 75 mm dia Single Branch Door "T" - CI (Spun) fittings Each 539

533 MAT-02085 BMW-H.47 100 mm dia Single Branch Door "T" - CI (Spun) fittings Each 714

534 MAT-02086 BMW-H.48 150 mm dia Single Branch Door "T" - CI (Spun) fittings Each 1342

535 MAT-02087 BMW-H.49 75 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 539

536 MAT-02088 BMW-H.50 100 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 714

537 MAT-02089 BMW-H.51 150 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 1576

538 MAT-02090 BMW-H.52 75 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 590

539 MAT-02091 BMW-H.53 100 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 789

540 MAT-02092 BMW-H.54 150 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 1697

541 MAT-02093 BMW-H.55 75 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 623

542 MAT-02094 BMW-H.56 100 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 840

543 MAT-02095 BMW-H.57 75 mm dia Double Branch Door "T" - CI (Spun) fittings Each 695
544 MAT-02096 BMW-H.58 100 mm dia Double Branch Door "T" - CI (Spun) fittings Each 876

545 MAT-02097 BMW-H.59 75 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 695

546 MAT-02098 BMW-H.60 100 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 876

547 MAT-02099 BMW-H.61 75 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 733

548 MAT-02100 BMW-H.62 100 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 950

549 MAT-02101 BMW-H.63 75 mm dia Shoe Bend - CI (Spun) fittings Each 431

550 MAT-02102 BMW-H.64 100 mm dia Shoe Bend - CI (Spun) fittings Each 503

551 MAT-02103 BMW-H.65 150 mm dia Shoe Bend - CI (Spun) fittings Each 1021

552 MAT-02104 BMW-H.66 75 mm dia Collar - CI (Spun) fittings Each 294

553 MAT-02105 BMW-H.67 100 mm dia Collar - CI (Spun) fittings Each 357
554 MAT-02106 BMW-H.68 150 mm dia Collar - CI (Spun) fittings Each 733

555 MAT-02107 BMW-H.69 75 mm dia Cowl - CI (Spun) fittings Each 260

556 MAT-02108 BMW-H.70 100 mm dia Cowl - CI (Spun) fittings Each 294

557 MAT-02109 BMW-H.71 150 mm dia Cowl - CI (Spun) fittings Each 659

224
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
75 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) Basic Rate for
558 MAT-02110 BMW-H.72 Each SoR 2024-25
fittings
(Rs.)
100 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) 457
559 MAT-02111 BMW-H.73 Each
fittings
150 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) 922
560 MAT-02112 BMW-H.74 Each
fittings
75 mm dia Offset 6" (152.4mm ) projection - CI (Spun) 412
561 MAT-02113 BMW-H.75 Each
fittings
100 mm dia Offset 6" (152.4mm ) projection - CI (Spun) 539
562 MAT-02114 BMW-H.76 Each
fittings
150 mm dia Offset 6" (152.4mm ) projection - CI (Spun) 1073
563 MAT-02115 BMW-H.77 Each
fittings
564 MAT-02116 BMW-H.78 75 mm diaLong Door Bend - CI (Spun) fittings Each 865

565 MAT-02117 BMW-H.79 100 mm diaLong Door Bend - CI (Spun) fittings Each 930

566 MAT-02118 BMW-H.80 75 mm dia Hand Hole pipe ( Inspection pipe) Each 497

567 MAT-02119 BMW-H.81 100 mm dia Hand Hole pipe ( Inspection pipe) Each 677

568 MAT-02120 BMW-H.82 150 mm dia Hand Hole pipe ( Inspection pipe) Each 901

569 MAT-02121 BMW-H.83 75 mm dia P Traps - CI (Spun) fittings Each 539

570 MAT-02122 BMW-H.84 100 mm dia P Traps - CI (Spun) fittings Each 738

4" x 3" (101.6 mm x 76.2mm ) P. Traps 100 mm dia - CI 846

571 MAT-02123 BMW-H.85 Each
(Spun) fittings
4" x 3" (101.6 mm x 76.2mm ) Vent Traps 100 mm dia - CI 846
572 MAT-02124 BMW-H.86 Each
(Spun) fittings
4" x 3" (101.6 mm x 76.2mm ) Reducer 75 mm dia - CI 525
573 MAT-02125 BMW-H.87 Each
(Spun) fittings
6" x 4" (152.4 mm x101.6 mm ) Reducer 75 mm dia - CI 719
574 MAT-02126 BMW-H.88 Each
(Spun) fittings
3" x 2" ( 76.2 mm x 50.8 mm ) plain T 75 mm dia - CI (Spun) 448
575 MAT-02127 BMW-H.89 Each
fittings
3" x 2" ( 76.2 mm x 50.8 mm ) Door T 75 mm dia - CI (Spun) 701
576 MAT-02128 BMW-H.90 Each
fittings
3" x 2" ( 76.2 mm x 50.8 mm ) Plain Y 75 mm dia - CI 701
577 MAT-02129 BMW-H.91 Each
(Spun) fittings
3" x 2" ( 76.2 mm x 50.8 mm ) Door Y 75 mm dia - CI 701
578 MAT-02130 BMW-H.92 Each
(Spun) fittings
4" x 3" (101.6 mm x 76.2mm ) Plain T75 mm dia - CI (Spun) 701
579 MAT-02131 BMW-H.93 Each
fittings
4" x 3" (101.6 mm x 76.2mm ) Door T75 mm dia - CI (Spun) 742
580 MAT-02132 BMW-H.94 Each
fittings
4" x 3" (101.6 mm x 76.2mm ) Plain Y75 mm dia - CI (Spun) 742
581 MAT-02133 BMW-H.95 Each
fittings
4" x 3" (101.6 mm x 76.2mm ) DoorY75 mm dia - CI (Spun) 793
582 MAT-02134 BMW-H.96 Each
fittings
583 MAT-02135 BMW-H.97 6" x 4" (152.4 mm x101.6 mm ) Plain T 75 mm dia - CI Each 1037

225
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
(Spun) fittings
6" x 4" (152.4 mm x101.6 mm )Door T 75 mm dia - CI 1124
584 MAT-02136 BMW-H.98 Each
(Spun) fittings
6" x 4" (152.4 mm x101.6 mm ) Plain Y 75 mm dia - CI 1190
585 MAT-02137 BMW-H.99 Each
(Spun) fittings
BMW- 6" x 4" (152.4 mm x101.6 mm )DoorY 75 mm dia - CI 1453
586 MAT-02138 Each
H.100 (Spun) fittings
BMW- 75 mm diaPlain " T" 27 " (685.8 mm ) Special Types of Long 1506
587 MAT-02139 Each
H.101 Fittings
BMW- 100 mm dia - Plain " T" 27 " (685.8 mm ) Special Types of 2115
588 MAT-02140 Each
H.102 Long CI (Spun) fittings
BMW- 75 mm dia Door "T" 27" (685.8 mm )Special Types of Long 1682
589 MAT-02141 Each
H.103 CI (Spun) fittings
BMW- 100mm dia Door "T" 27" (685.8 mm )Special Types of Long 2324
590 MAT-02142 Each
H.104 CI (Spun) fittings
BMW- 75 mm diaPlain " Y" 27" (685.8 mm) Special Types of Long 1682.1
591 MAT-02143 Each
H.105 CI (Spun) fittings
BMW- 100mm diaPlain " Y" 27" (685.8 mm) Special Types of Long 2324
592 MAT-02144 Each
H.106 CI (Spun) fittings
BMW- 75 mm dia Door " Y" 27" (685.8 mm)Special Types of Long 1875
593 MAT-02145 Each
H.107 CI (Spun) fittings
BMW- 100mm dia Door " Y" 27" (685.8 mm)Special Types of Long 2552
594 MAT-02146 Each
H.108 CI (Spun) fittings
I MISCELLANEOUS ITEMS
595 MAT-02147 BMW-I.01 a) Supplying & Fixing solder joints up to 50.8 mm dia Each 62

596 LAB-00260 BMW-I.02 b) - do - labour charges only Each 22

a) Supplying & Fixing solution joints up to 50.8 dia Ist 13

597 MAT-02148 BMW-I.03 Each
quality.
598 LAB-00261 BMW-I.04 b) - do - labour charges only Each 2

Chiselling the stone masonry wall for fixing of wooden 34

599 MAT-02149 BMW-I.05 Each
blocks including finishing as directed by the department
Chiselling the stone masonry wall and repairs as directed by 163
600 MAT-02150 BMW-I.06 1 Rm
the department.
Chiselling the brick masonry wall and repairs as directed by 34
601 MAT-02151 BMW-I.07 1 Rm
the department.
a) S & F NP telephonic shower spray set & valve mixer with 2102
602 MAT-02152 BMW-I.08 rest and all fittings complete (ARK/ESSCO or equivalent Each
make)
603 LAB-00262 BMW-I.09 b) - do - labour charges only Each 482

604 MAT-02153 BMW-I.10 a) S & F NP shower spray fancy with NP Flexible pipe Each 563

605 LAB-00263 BMW-I.11 b) - do - labour charges only Each 160

606 MAT-02154 BMW-I.12 a) S & F NP cover for Nahany trap Each 32

607 LAB-00264 BMW-I.13 b) - do - labour charges only Each 22

608 MAT-02155 BMW-I.14 a) Painting the flushing tank with white enamel paint Each 119

226
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
609 LAB-00265 BMW-I.15 b) - do - labour charges only Each 77

S & F internal fittings for flush tank Parryplast wonder flush 769
610 MAT-02156 BMW-I.16 Each
or equivalent
611 MAT-02157 BMW-I.17 Repairing and over hauling flushing tank Each 91

612 MAT-02158 BMW-I.18 a) Supplying & Fixing NP chain rubber and plug for basin Each 41
613 LAB-00266 BMW-I.19 b) - do - labour charges only Each 8

a) S & F 25.4 mm dia& 609.6 mm long aluminium anodized 162

614 MAT-02159 BMW-I.20 Each
towel rod with brackets and aluminium screws
615 LAB-00267 BMW-I.21 b) - do - labour charges only Each 53

a) S & F 19.04 mm dia& 609.6 mm long aluminium 144

616 MAT-02160 BMW-I.22 Each
anodized towel rod with brackets and aluminium screws
617 LAB-00268 BMW-I.23 b) - do - labour charges only Each 81

a) S & F 609.6 mm long 127 mm wide plate glass shelf with 206
618 MAT-02161 BMW-I.24 superior quality aluminium railing complete with aluminium Each
screws
619 LAB-00269 BMW-I.25 b) - do - labour charges only Each 67

620 MAT-02162 BMW-I.26 a) S & F 609.6 mm long 127 mm wide plate glass shelf only Each 67

621 LAB-00270 BMW-I.27 b) - do - labour charges only Each 14

622 MAT-02163 BMW-I.28 a) S & F NP soap dish heavy type with NP SCREWS Each 231

623 LAB-00271 BMW-I.29 b) - do - labour charges only Each 15

624 MAT-02164 BMW-I.30 a) S &F NP holder brackets with screws Each 48

625 LAB-00272 BMW-I.31 b) - do - labour charges only Each 17

a) S & F liquid soap container NP metallic with NP brackets 232

626 MAT-02165 BMW-I.32 Each
and screws.
627 LAB-00273 BMW-I.33 b) - do - labour charges only Each 27

628 MAT-02166 BMW-I.34 a) S & F 31.75 mm C.P TRAPS Each 303

629 LAB-00274 BMW-I.35 b) - do - labour charges only Each 53

630 MAT-02167 BMW-I.36 a) Supplying & fixing 88.9 mm A.C cowls Each 69

631 LAB-00275 BMW-I.37 b) - do - labour charges only Each 17

632 MAT-02168 BMW-I.38 a)Supplying & fixing A.CCowl 63.5 mm dia Each 47

633 LAB-00276 BMW-I.39 b) - do - labour charges only Each 14

634 MAT-02169 BMW-I.40 Removing and refixing W.C s Each 217

Removing and refixing wash hand basins of any size with 208
635 MAT-02170 BMW-I.41 Each
fittings complete
636 MAT-02171 BMW-I.42 a)S & F 76.2 x 101.6 mm teak wood block complete Each 25
637 LAB-00277 BMW-I.43 b) - do - labour charges only Each 12

Cutting holes in C.C; basement & repairs Labour charges 128

638 LAB-00278 BMW-I.44 Each
only
Cutting holes in stone masonry& basement and repairs 86
639 LAB-00279 BMW-I.45 Each
Labour charges only
640 LAB-00280 BMW-I.46 Cutting holes in Brick masonry& repairs Labour charges Each 57

227
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
only
Cutting holes in RCC slab floor & repairs Labour charges 86
641 LAB-00281 BMW-I.47 Each
only
a)Supplying & Fixing 12.7 mm PVC connection with brass 95
642 MAT-02172 BMW-I.48 Each
union nut C.P coated
643 LAB-00282 BMW-I.49 b) - do - labour charges only Each 20
644 MAT-02173 BMW-I.50 a) S & F 12.7 mm .M.P couplings Each 34

645 LAB-00283 BMW-I.51 b) - do - labour charges only Each 14

646 MAT-02174 BMW-I.52 a) S & F 19.05 mm M.P couplings Each 41

647 LAB-00284 BMW-I.53 b) - do - labour charges only Each 14

648 MAT-02175 BMW-I.54 a) S& F MP coupling 25.4 mm dia Each 91

LAB-00285 b) - do - labour charges only Each 14

649 MAT-02176 BMW-I.55 a) S & FPVC Rubber adopter for LLC and bend Each 19

650 LAB-00286 BMW-I.56 b) - do - labour charges only Each 9

651 MAT-02177 BMW-I.57 a) S& F 31.75 mm Brass union nuts Each 34

652 LAB-00287 BMW-I.58 b) - do - labour charges only Each 8

653 MAT-02178 BMW-I.59 a) S& F 38.1 mm Brass union nuts Each 37

654 LAB-00288 BMW-I.60 b) - do - labour charges only Each 12

a) Constructing Brick masonry chamber over the gully trap 468

655 MAT-02179 BMW-I.61 or peet valve and fitted with 304.8 x 228.6 m size CI frame Each
and hinged cover.
656 LAB-00289 BMW-I.62 b) - do - labour charges only Each 120

a) Constructing Brick masonry support for G.I pipe with C.M 76

657 MAT-02180 BMW-I.63 304.8 x 228.6 x228.6 mm size includingplastering and Each
finishing etc. complete.
658 LAB-00290 BMW-I.64 b) - do - labour charges only Each 27

a) Supplying & fixing 304.8 x 228.6 mm CI frame & cover 122

659 MAT-02181 BMW-I.65 Each
over gully taps
660 LAB-00291 BMW-I.66 b) - do - labour charges only Each 42

661 MAT-02182 BMW-I.67 a) Supplying & fixing CI Nahany trap grating Each 21

662 LAB-00292 BMW-I.68 b) - do - labour charges only Each 14

663 MAT-02183 BMW-I.69 a) Supplying & fixing CI gully trap grating Each 49

664 LAB-00293 BMW-I.70 b) - do - labour charges only Each 14

a) Supplying & fixing valves for brass ball cocks 25.4 mm 19

665 MAT-02184 BMW-I.71 Each
dia
666 LAB-00294 BMW-I.72 b) - do - labour charges only Each 12

667 MAT-02185 BMW-I.73 a) Supplying & fixing 12.7 m valve for bib tap or stop cocks Each 18

668 LAB-00295 BMW-I.74 b) - do - labour charges only Each 8

669 MAT-02186 BMW-I.75 a) Supplying & fixing 19.05 m valve for bib tap or stop cocks Each 39
670 LAB-00296 BMW-I.76 b) - do - labour charges only Each 14

228
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
671 MAT-02187 BMW-I.77 Removing 12.7 mm GIpipe and refixing the same Mr. 65

672 MAT-02188 BMW-I.78 Removing 19.05 mm GIpipe and refixing the same Mr. 72

673 MAT-02189 BMW-I.79 Removing 25.4 mm GIpipe and refixing the same Mr. 108

674 MAT-02190 BMW-I.80 Removing 38.1 mm GIpipe and refixing the same Rm 136

675 MAT-02191 BMW-I.81 Removing 50.8 mm GIpipe and refixing the same Rm 159

676 MAT-02192 BMW-I.82 Cleaning the W.C with acid and Vim powder Each 44

677 MAT-02193 BMW-I.83 Cleaning the Urinal with acid and Vim power Each 44

678 MAT-02194 BMW-I.84 Cleaning the wash basin with acid and Vim powder Each 44

679 MAT-02195 BMW-I.85 Cleaning theE.W.C with acid and Vim power Each 44

Supplying & fixing 914.4 x 457.2 mm CI man hole frame and 1920
680 MAT-02196 BMW-I.86 Each
cover (light weight) 30 Kgs
Supplying & fixing 602 x 602 mm CI man hole frame and 2843
681 MAT-02197 BMW-I.87 Each
cover (light weight) 30 Kgs
682 LAB-00297 BMW-I.88 b) - do - labour charges only Each 168

683 MAT-02198 BMW-I.89 a) Supplying & fixing CI steps for septic tank. Each 63

684 LAB-00298 BMW-I.90 b) - do - labour charges only Each 14

a) Supplying & fixing 50.8cm dia C.I. Man hole frame & 1243
685 MAT-02199 BMW-I.91 Each
cover for 914.4 mm dia chamber (20 Kgs - Light weight)
686 LAB-00299 BMW-I.92 b) - do - labour charges only Each 168

a) Supplying & fixing 50.8cm dia C.I. Man hole frame & 2579
687 MAT-02200 BMW-I.93 cover for 914.4 mm dia chamber(Medium weight) as per Each
IS:1726 - 40 Kgs
688 LAB-00300 BMW-I.94 b) - do - labour charges only Each 427

Cost. 50.8 mm thick RCM baffle wall with 2.267 Kg steel & 235
689 LAB-00301 BMW-I.95 rabbit wire mesh in CM 1:3 with fine rendering in neat 1Sqm
cement labour charges Only
690 MAT-02201 BMW-I.96 a) Cost. 50.8 mm RCC partition wall 1Sqm 263

691 LAB-00302 BMW-I.97 b) - do - labour charges only 1 Sqm 53

a)S& F double layer of bamboo matting tarred on both 10 606

692 MAT-02202 BMW-I.98
sides. Sqm
b) - do - labour charges only 10 147
693 LAB-00303 BMW-I.99
Sqm
694 MAT-02203 BMW-I.100 Removing of 101.6 m or 76.2 mm CI pipe 1 RM 34

695 MAT-02204 BMW-I.101 a) Supplying & fixing 76.2 mm W.I clamps Each 25
696 LAB-00304 BMW-I.102 b) - do - labour charges only Each 12

697 MAT-02205 BMW-I.103 a) Supplying & fixing NP coat hook Each 45

698 LAB-00305 BMW-I.104 b) - do - labour charges only Each 14

a) Supplying and fixing TV shape mirror with plastic frame 502

699 MAT-02206 BMW-I.105 Each
size 609.6 mm x 457 .2 mm
700 LAB-00306 BMW-I.106 b) - do - labour charges only Each 140

701 MAT-02207 BMW-I.107 a) Supplying & fixing GI pipe plug of size 12.7 mm dia Each 10

229
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
702 LAB-00307 BMW-I.108 b) - do - labour charges only Each 1

703 MAT-02208 BMW-I.109 a) Supplying & fixing 19.06 mm dia GI plug Each 14

704 LAB-00308 BMW-I.110 b) - do - labour charges only Each 1

705 MAT-02209 BMW-I.111 a) Supplying and fixing 38.1 mm dia of GI plug Each 69

706 LAB-00309 BMW-I.112 b) - do - labour charges only Each 12

707 MAT-02210 BMW-I.113 a) Supplying & fixing 50.8 mm dia of GI PLUG Each 106

708 LAB-00310 BMW-I.114 b) - do - labour charges only Each 14

709 MAT-02211 BMW-I.115 a) Supplying & fixing 76.2 mm dia of GI PLUG Each 190

710 LAB-00311 BMW-I.116 b) - do - labour charges only Each 22

711 MAT-02212 BMW-I.117 a) Supplying & fixing C.P flange. Each 25

712 LAB-00312 BMW-I.118 b) - do - labour charges only Each 10

a) Supplying & fixing stainless steel sink size 36" x 18" 7175
713 MAT-02213 BMW-I.119 Each
(914.4x457.2mm) 1 mm thick with accessories
714 LAB-00313 BMW-I.120 b) - do - labour charges only Each 608

a) Supplying & fixing SINGLE BOWL stainless steel sink 5655

715 MAT-02214 BMW-I.121 size 24"x18"x8 "(609.6 x 457.2 x 203.2mm) 1 mm thick with Each
accessories
716 LAB-00314 BMW-I.122 b) - do - labour charges only Each 589

a) Supplying & fixing stainless steel sink size 20" x18" x 8 5142
717 MAT-02215 BMW-I.123 Each
"(508x457.2x203.2mm) 1 mm thick with accessories
718 MAT-02216 BMW-I.124 b) - do - labour charges only Each 540

Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed 522

719 MAT-02217 BMW-I.125 porcelain channel fixed in brick masonry white cement Each
pointing.
Supply & Fixing of steel surgical long elbow action handle 946
720 MAT-02218 BMW-I.126 12.7 mm dia bib cock Indian make heavy type including all Each
materials
Supply & fixing 2 1/2" (63.5mm) dia Sluice valve ISI mark 5180
721 MAT-02219 BMW-I.127 with 2 Nos. flanges, 8 nos, 3/4" dia nuts & bolts and all Each
necessary washers and packing materials etc. complete
722 MAT-02220 BMW-I.128 Supply & fixing porcelain P' trap Each 223

Supplying & fixing oval shape basin white 2371

723 MAT-02221 BMW-I.129 Each
(520x410mm)parry or equivalent
Supply & fixing RCC cover 22" dia with nominal 701
724 MAT-02222 BMW-I.130 Each
reinforcement 3 " thick and hooks for lifting
Supply & fixing cp spl. Grating with frame and cover of 1st 60
725 MAT-02223 BMW-I.131 Each
quality
726 MAT-02224 BMW-I.132 Supply & fixing towel rod (CP) of 24" long and 3/4 " dia Each 378

727 MAT-02225 BMW-I.133 Supply & fixing of LLC handle set 1stquality Each 75

Mechanical Cleaning of water sumps with pumps & UV 1000 52

728 MAT-02226 BMW-I.134
disinfecting Lit
729 MAT-02227 BMW-I.135 Supply & fixing 4" dia CP thimble pipe: 150 mm long Each 395

730 MAT-02228 BMW-I.136 Supply & fixing 4" dia CP thimble pipe:220 mm long Each 590

230
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
731 MAT-02229 BMW-I.137 Supply & fixing 4" dia CP thimble pipe: 300 mm long Each 787

732 MAT-02230 BMW-I.138 Supply & fixing CP long bend Each 333

733 MAT-02231 BMW-I.139 Supply & fixing CP short bend Each 167

Supplying & fixing 15 mm bib tap with flange Chromeum 1644

734 MAT-02232 BMW-I.140 Each
plated
Supply & fixing bib cock cum health faucet with 1 m long 4166
735 MAT-02233 BMW-I.141 flexible tube and wall hook with 7 years warranty Chrome Each
plated
Supply & fixing 2 in 1 bib cock cum health faucet with 1 m 7006
736 MAT-02234 BMW-I.142 long flexible tube and wall hook with 7 years warranty: Ivory Each
gold
Supply & fixing pillar cock with 7years warranty: Chrome 1727
737 MAT-02235 BMW-I.143 Each
plated
Supply & fixing pillar cock with 7years warranty: Ivory gold 2948
738 MAT-02236 BMW-I.144 Each

Supply & fixing Angular stop cocks with wall flange with 7 1704
739 MAT-02237 BMW-I.145 Each
years warranty: Chrome plated
Supply & fixing Angular stop cocks with wall flange with 7 3300
740 MAT-02238 BMW-I.146 Each
years warranty: Ivory gold
Supply & fixing Waste coupling 32 mm size full thread with 383
741 MAT-02239 BMW-I.147 80 mm heightJaquar make with 7 years warranty: Chrome Each
plated
Supply & fixing of Bottle trap 225mm make with 7 years 1629
742 MAT-02240 BMW-I.148 Each
warranty: Chrome plated
Supply & fixing of Bottle trap Jaquar make with 7 years 2754
743 MAT-02241 BMW-I.149 Each
warranty: Ivory gold
Supply & Fixing copper pipe 450 mm long with nuts & 400
744 MAT-02242 BMW-I.150 Each
washers Jaquar make with 7 years warranty: Chrome plated
Supply & Fixing copper pipe 450 mm long with nuts & 776
745 MAT-02243 BMW-I.151 Each
washers Jaquar make with 7 years warranty:Ivory gold
Supply and fixing wall mirror with provision for over head 5265
746 MAT-02244 BMW-I.152 shower and 115 mm long bend pipe with wall flange Each
Jaquarmake queen series with 7 years warranty:Chrome
plated
Supply and fixing wall mirror with provision for over head 8282
747 MAT-02245 BMW-I.153 shower and 115 mm long bend pipe with wall flange Each
Jaquarmake queen series with 7 years warranty: Ivory gold
Supply & fixing overhead shower rose with revolving joint 2443
748 MAT-02246 BMW-I.154 and 150 mm long swivel shower arm with 7 years Each
warranty:Chrome plated
Supply & fixing overhead shower rose with revolving joint 3579
749 MAT-02247 BMW-I.155 and 150 mm long swivel shower arm Jaquar make queen Each
series. with 7 years warranty: Ivory Gold
Supply and Fixing Wall Mixer with Telephonic shower 13953
750 MAT-02248 BMW-I.156 arrangement with crutch and flexible pipe Jaquar series Each
Ivory gold colour for bath tub. with 7 years warranty
751 MAT-02249 BMW-I.157 Supply & fixing Bath tub overflow set complete with over Each 1699

231
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
flow cap, 450 mm Ball chain with rubber plug & union bend
with brass nut Jaquar make, Ivory gold colour. with 7 years
warranty
Supply & fixing sink cock with regular swinging spout with 2441
752 MAT-02250 BMW-I.158 wall flange chromeplated with 7 years warranty Each

Supply & fixingsoap dish: with 7years warranty:Chrome 1602

753 MAT-02251 BMW-I.159 Each
plated
Supply & fixingsoap dish Jaquar make queen series: with 7 2351
754 MAT-02252 BMW-I.160 Each
years warranty: Ivory Gold
Supply & fixing of toilet paper holder. with 7 years 1291
755 MAT-02253 BMW-I.161 Each
warranty: Chrome plated
Supply & fixing of toilet paper holder Jaquar make Queen 2272
756 MAT-02254 BMW-I.162 Each
series. with 7 years warranty: Ivory Gold
Supply & Fixing of Towel ring with 7 years warranty: 1214
757 MAT-02255 BMW-I.163 Each
Chrome plated
Supply & Fixing of Towel ring Jaquar make Queen series 1982
758 MAT-02256 BMW-I.164 Each
with 7 years warranty: Ivory Gold
Supply & Fixingof Robe hook with 7 years warranty:Chrome 902
759 MAT-02257 BMW-I.165 Each
plated
Supply & Fixingof towel coat hook Jaquar make Queen 1867
760 MAT-02258 BMW-I.166 Each
series with 7 years warranty:Ivory Gold
Supply & Fixing of Towel rod 24 " Jaquar make Queen 3097
761 MAT-02259 BMW-I.167 Each
series Ivory gold colour with 7 years warranty
Supply & Fixing of Tumbler holder Jaquar make Queen 2170
762 MAT-02260 BMW-I.168 Each
series, Ivory gold colour with 7 years warranty
Supply & fixing of Glass shelf 22" Jaquar make Queen 4232
763 MAT-02261 BMW-I.169 Each
series, Ivory gold colour with 7 years warranty
Supply & Fixing of 2 in 1 Bibcock cum Health Faucet with 3070
764 MAT-02262 BMW-I.170 1m long tube and wall hook , Chrome Finish with 7 years Each
warranty
Supply & Fixing of Bibcock,Chrome Finish with 7 years 902
765 MAT-02263 BMW-I.171 Each
warranty
Supply & Fixing of Pillar cock Jaquar Continental series, 1121
766 MAT-02264 BMW-I.172 Each
Chrome Finish with 7 years warranty
Supply & Fixing of Angular stopcock with wall flange Jaquar 834
767 MAT-02265 BMW-I.173 Each
Continental series, Chrome finish with 7 years warranty
Supply fixing of Waste coupling Jaquar make, Chrome finish 363
768 MAT-02266 BMW-I.174 Each
with 7 years warranty
Supply & Fixing of Bottle Trap Jaquar make, Chrome finish 1629
769 MAT-02267 BMW-I.175 Each
with 7 years warranty
Supply & Fixing of copper pipe 450mm long with nuts & 363
770 MAT-02268 BMW-I.176 Each
washers Jaquar make, Chrome Finish with 7 years warranty
Supply & Fixing of Wall Mixer with provision for overhead 3943
771 MAT-02269 BMW-I.177 shower and 115mm long bend pipe with wall flange Jaquar Each
make Continental series, Chrome finish with 7 years
warranty

232
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply & Fixing of Exclusive overhead shower with 190mm 1684
772 MAT-02270 BMW-I.178 long light body shower arm Jaquar make Continental series, Each
Chrome finish with 7 years warranty
Supply & Fixing wall mixer with telephonic shower 5505
773 MAT-02271 BMW-I.179 arrangement with crutch and telephone shower with flexible Each
tube Jaquar make Continental series Chrome colour for
bath tub with 7 years warranty
Supply & Fixing bath tub over flow set complete with over 1285
774 MAT-02272 BMW-I.180 flow cap,450mm ball chain with rubber plug 7 Union bend Each
with brass nuts Jaquar make, Chrome colour with 7 years
warranty
Supply & Fixing Sink cock with regular swinging spout with 1587
775 MAT-02273 BMW-I.181 flange chrome plated Jaquar make Continental series with 7 Each
years warranty
Supply & Fixing soap dish Jaquar make Continental series, 1249
776 MAT-02274 BMW-I.182 Each
Chrome Finish with 7 years warranty
Supply & Fixing of Toilet paper holder Jaquar make 834
777 MAT-02275 BMW-I.183 Each
Continental series, Chrome finish with 7 years warranty
Supply & Fixing of Towel Ring Jaquar make Continental 960
778 MAT-02276 BMW-I.184 Each
series, Chrome finish with 7 years warranty
Supply & Fixing Double coat hook Jaquar make Continental 716
779 MAT-02277 BMW-I.185 Each
series, Chrome finish with 7 years warranty
Supply & Fixing of towel rail 24'' Jaquar make Continental 1549
780 MAT-02278 BMW-I.186 Each
series, Chrome finish with 7 years warranty
Supply & Fixing of Tumblerholder Jaquar make Continental 1044
781 MAT-02279 BMW-I.187 Each
series, Chrome finish with 7 years warranty
Supply & Fixing of Glass shelf 22'' Jaquar make Continental 2054
782 MAT-02280 BMW-I.188 Each
series, Chrome finish with 7 years warranty
Supply & Fixing of Bibcock cum Health Faucet with 1m long 3673
783 MAT-02281 BMW-I.189 tube and wall hook of Jaquar Florentine(Quarter turn) Each
series, Chrome Finish with 7 years warranty
Supply & Fixing of Bibcock Jaquar Florentine (Quarter 1239
784 MAT-02282 BMW-I.190 Each
turn)series, Chrome Finish with 7 years warranty
Supply & Fixing of Pillar cock Jaquar Florentine(Quarter 1239
785 MAT-02283 BMW-I.191 Each
turn) series, Chrome Finish with 7 years warranty
Supply & Fixing of Angular stopcock with wall flange Jaquar 1219
786 MAT-02284 BMW-I.192 Florentine( Quarter turn)series, Chrome finish with 7 years Each
warranty
Supply & Fixing of Bottle Trap Jaquar make, Chrome finish 1629
787 MAT-02285 BMW-I.193 Each
with 7 years warranty
Supply & Fixing of Wall Mixer with provision for overhead 4758
788 MAT-02286 BMW-I.194 shower and 115mm long bend pipe with wall flange Jaquar Each
make Florentine(Quarter turn) series, Chrome finish with 7
years warranty
Supply & Fixing wall mixer with telephonic shower 7170
789 MAT-02287 BMW-I.195 arrangement with crutch and telephone shower with flexible Each
tube Jaquar make Florentine(Quarter turn) series Chrome
colour for bath tub with 7 years warranty

233
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply & Fixing Sink cock with regular swinging spout with 1900
790 MAT-02288 BMW-I.196 flange chrome plated make Florentine(Quarter turn) series Each
with 7 years warranty
Supply & Fixing of Rose shower with revolving ball joint & 2019
791 MAT-02289 BMW-I.197 Each
115mm long shower arm with 7 years warranty
Supply & Fixing of make chrome plated Metro pole flush 3536
792 MAT-02290 BMW-I.198 valveconcealed type with cover plate 40mm size with 7 Each
years warranty
Supply & Fixing of make Sensotronic sensor faucetfor 13887
793 MAT-02291 BMW-I.199 Each
wash basin, Chrome plated with 7 years warranty
Supply & fixing of Jaquar make Sensotronic concealed type 13887
794 MAT-02292 BMW-I.200 flushing valve for urinal complete set with installation box Each
with control cock, Chrome plated with 7 years warranty
Supply & fixing of Jaquar make Auto closing system pillar 2301
795 MAT-02293 BMW-I.201 Each
cock for wash basin, Chrome plated with 7 years warranty
Supply& Fixing of Jaquar make Auto Closing system 2413
796 MAT-02294 BMW-I.202 Each
Bibcock, Chrome plated with 7 years warranty

797 MAT-02295 BMW-I.203 ITEM DELETED

798 MAT-02296 BMW-I.204 ITEM DELETED

799 MAT-02297 BMW-I.205 ITEM DELETED

800 MAT-02298 BMW-I.206 ITEM DELETED

801 MAT-02299 BMW-I.207 ITEM DELETED

802 MAT-02300 BMW-I.208 ITEM DELETED

803 MAT-02301 BMW-I.209 ITEM DELETED

804 MAT-02302 BMW-I.210 ITEM DELETED

805 MAT-02303 BMW-I.211 ITEM DELETED

806 MAT-02304 BMW-I.212 ITEM DELETED

807 MAT-02305 BMW-I.213 ITEM DELETED

234
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)

808 MAT-02306 BMW-I.214

ITEM DELETED

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) 175

composite pressure pipes conforming to IS-15450-2004 with
UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all
809 MAT-02307 BMW-I.215 special composite fittings, plastic & brass blend inserts for 1 RM
elbows, tees, reducers, couplers, connectors etc complete
including excavating trenches up to 1.0 M deep laying
pipes, fixing in position, testing, refilling excavated earth and
commissioning etc16 mm OD pipe

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) 206

composite pressure pipes conforming to IS-15450-2004 with
UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all
810 MAT-02308 BMW-I.216 special composite fittings, plastic & brass blend inserts for 1 RM
elbows, tees, reducers, couplers, connectors etc complete
including excavating trenches up to 1.0 M deep laying
pipes, fixing in position, testing, refilling excavated earth and
commissioning etc20 mm OD pipe

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) 251

composite pressure pipes conforming to IS-15450-2004 with
UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all
811 MAT-02309 BMW-I.217 special composite fittings, plastic & brass blend inserts for 1 RM
elbows, tees, reducers, couplers, connectors etc complete
including excavating trenches up to 1.0 M deep laying
pipes, fixing in position, testing, refilling excavated earth and
commissioning etc25mm OD pipe

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) 324

composite pressure pipes conforming to IS-15450-2004 with
UV stabilized, carbon black for hot & cold water supply,
capable to withstand pressure up to 80 C including all
812 MAT-02310 BMW-I.218 special composite fittings, plastic & brass blend inserts for 1 RM
elbows, tees, reducers, couplers, connectors etc complete
including excavating trenches up to 1.0 M deep laying
pipes, fixing in position, testing, refilling excavated earth and
commissioning etc32 mm OD pipe

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) 415

composite pressure pipes conforming to IS-15450-2004 with
813 MAT-02311 BMW-I.219 UV stabilized, carbon black for hot & cold water supply, 1 RM
capable to withstand pressure up to 80 C including all
special composite fittings, plastic & brass blend inserts for
elbows, tees, reducers, couplers, connectors etc complete
including excavating trenches up to 1.0 M deep laying
pipes, fixing in position, testing, refilling excavated earth and
commissioning etc40 mm OD pipe

235
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply and Fixing of Premium make CPVC Pipes and
Fittings to meet the requirement of ASTM-D 2846 and are
produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11
and SDR 13.5 pipes are made from idential CPVC
compounds having the same physical Properties for Hot and
Cold Water (IS 15778:2007)
814 MAT-02312 BMW-I.220 15.90mm ODPipe - SDR 13.5 1 RM 157

815 MAT-02313 BMW-I.221 22.20mm ODPipe - SDR 13.5 1 RM 184

816 MAT-02314 BMW-I.222 28.60mm ODPipe - SDR 13.5 1 RM 222

817 MAT-02315 BMW-I.223 34.90mm ODPipe - SDR 13.5 1 RM 288

818 MAT-02316 BMW-I.224 41.30mm ODPipe - SDR 13.5 1 RM 390

819 MAT-02317 BMW-I.225 54mm ODPipe - SDR 13.5 1 RM 522

820 MAT-02318 BMW-I.226 15.90mm ODPipe - SDR 11 1 RM 168

821 MAT-02319 BMW-I.227 22.20mm ODPipe - SDR 11 1 RM 198

822 MAT-02320 BMW-I.228 28.60mm ODPipe - SDR 11 1 RM 245

823 MAT-02321 BMW-I.229 34.90mm ODPipe - SDR 11 1 RM 321

824 MAT-02322 BMW-I.230 41.30mm ODPipe - SDR 11 1 RM 438

825 MAT-02323 BMW-I.231 54mm ODPipe - SDR 11 1 RM 600

Supply of 20mm x 1.9mm PN 10/PPR Pipe conforming to 45

826 MAT-02324 BMW-I.232 1 RM
DIN Standards 8077/8078 conforming to IS15801

Supply of 25mm x 2.3mm PN 10/PPR Pipe conforming to 67

827 MAT-02325 BMW-I.233 1 RM
DIN Standards 8077/8078 conforming to IS15801

Supply of 32mm x 2.9mm PN 10/PPR Pipe conforming to 106

828 MAT-02326 BMW-I.234 1 RM
DIN Standards 8077/8079 conforming to IS15801

Supply of 40mm x 3.7mm PN 10/PPR Pipe conforming to 166

829 MAT-02327 BMW-I.235 1 RM
DIN Standards 8077/8079 conforming to IS15801

Supply of 50mm x 4.6mm PN 10/PPR Pipe conforming to 297

830 MAT-02328 BMW-I.236 1 RM
DIN Standards 8077/8080 conforming to IS15801

Supply of 63mm x 5.8mm PN 10/PPR Pipe conforming to 466

831 MAT-02329 BMW-I.237 1 RM
DIN Standards 8077/8081 conforming to IS15801

Supply of 75mm x 6.8mm PN 10/PPR Pipe conforming to 649

832 MAT-02330 BMW-I.238 1 RM
DIN Standards 8077/8082 conforming to IS15801

Supply of 90mm x 8.2mm PN 10/PPR Pipe conforming to 890

833 MAT-02331 BMW-I.239 1 RM
DIN Standards 8077/8083 conforming to IS15801

Supply of 110mm x 10mm PN 10/PPR Pipe conforming to 1319

834 MAT-02332 BMW-I.240 1 RM
DIN Standards 8077/8084 conforming to IS15801

Supply of 20mm x 2.8mm PN 16/PPR Pipe conforming to 61

835 MAT-02333 BMW-I.241 1 RM
DIN Standards 8077/8078 conforming to IS15801

Supply of 25mm x 3.5mm PN 16/PPR Pipe conforming to 93

836 MAT-02334 BMW-I.242 1 RM
DIN Standards 8077/8078 conforming to IS15801

236
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply of 32mm x 4.4mm PN 16/PPR Pipe conforming to 151
837 MAT-02335 BMW-I.243 1 RM
DIN Standards 8077/8079 conforming to IS15801
Supply of 40mm x 5.5mm PN 16/PPR Pipe conforming to 231
838 MAT-02336 BMW-I.244 1 RM
DIN Standards 8077/8079 conforming to IS15801
Supply of 50mm x 6.9mm PN 16/PPR Pipe conforming to 415
839 MAT-02337 BMW-I.245 1 RM
DIN Standards 8077/8080 conforming to IS15801
Supply of 63mm x 8.6mm PN 16/PPR Pipe conforming to 654
840 MAT-02338 BMW-I.246 1 RM
DIN Standards 8077/8081 conforming to IS15801
Supply of 75mm x 10.3mm PN 16/PPR Pipe conforming to 924
841 MAT-02339 BMW-I.247 1 RM
DIN Standards 8077/8082 conforming to IS15801
Supply of 90mm x 12.3mm PN 16/PPR Pipe conforming to 1317
842 MAT-02340 BMW-I.248 1 RM
DIN Standards 8077/8083 conforming to IS15801
Supply of 110mm x 15.1mm PN 16/PPR Pipe conforming to 1973
843 MAT-02341 BMW-I.249 1 RM
DIN Standards 8077/8084 conforming to IS15801
Supply of 20mm x 3.4mm PN 20/PPR Pipe conforming to 71
844 MAT-02342 BMW-I.250 1 RM
DIN Standards 8077/8078 conforming to IS15801
Supply of 25mm x 4.2mm PN 20/PPR Pipe conforming to 109
845 MAT-02343 BMW-I.251 1 RM
DIN Standards 8077/8078 conforming to IS15801
Supply of 32mm x 5.4mm PN 20/PPR Pipe conforming to 175
846 MAT-02344 BMW-I.252 1 RM
DIN Standards 8077/8079 conforming to IS15801
Supply of 40mm x 6.7mm PN 20/PPR Pipe conforming to 270
847 MAT-02345 BMW-I.253 1 RM
DIN Standards 8077/8079 conforming to IS15801
Supply of 50mm x 8.3mm PN 20/PPR Pipe conforming to 480
848 MAT-02346 BMW-I.254 1 RM
DIN Standards 8077/8080 conforming to IS15801
Supply of 63mm x 10.5mm PN 20/PPR Pipe conforming to 757
849 MAT-02347 BMW-I.255 1 RM
DIN Standards 8077/8081 conforming to IS15801
Supply of 75mm x 12.5mm PN 20/PPR Pipe conforming to 1074
850 MAT-02348 BMW-I.256 1 RM
DIN Standards 8077/8082 conforming to IS15801
Supply of 90mm x 15mm PN 20/PPR Pipe conforming to 1460
851 MAT-02349 BMW-I.257 1 RM
DIN Standards 8077/8083
Supply of 110mm x 18.3mm PN 20/PPR Pipe conforming to 2298
852 MAT-02350 BMW-I.258 1 RM
DIN Standards 8077/8084 conforming to IS15801
Supply of 20mm PPR Socket conforming to DIN Standards 9
853 MAT-02351 BMW-I.259 1 RM
8077/8084
Supply of 25mm PPR Socket conforming to DIN Standards 15
854 MAT-02352 BMW-I.260 1 RM
8077/8085
Supply of 32mm PPR Socket conforming to DIN Standards 20
855 MAT-02353 BMW-I.261 1 RM
8077/8086
Supply of 40mm PPR Socket conforming to DIN Standards 33
856 MAT-02354 BMW-I.262 1 RM
8077/8087
Supply of 50mm PPR Socket conforming to DIN Standards 64
857 MAT-02355 BMW-I.263 1 RM
8077/8088
Supply of 63mm PPR Socket conforming to DIN Standards 124
858 MAT-02356 BMW-I.264 1 RM
8077/8089
Supply of 75mm PPR Socket conforming to DIN Standards 189
859 MAT-02357 BMW-I.265 1 RM
8077/8090

237
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply of 90mm PPR Socket conforming to DIN Standards 361
860 MAT-02358 BMW-I.266 1 RM
8077/8091
Supply of 110mm PPR Socket conforming to DIN Standards 644
861 MAT-02359 BMW-I.267 1 RM
8077/8092
Supply of 32mm PPR Core Flange conforming to DIN 39
862 MAT-02360 BMW-I.268 Each
Standards 8077/8086
Supply of 40mm PPR Core Flange conforming to DIN 62
863 MAT-02361 BMW-I.269 Each
Standards 8077/8087
Supply of 50mm PPR Core Flange conforming to DIN 81
864 MAT-02362 BMW-I.270 Each
Standards 8077/8088
Supply of 63mm PPR Core Flange conforming to DIN 128
865 MAT-02363 BMW-I.271 Each
Standards 8077/8089
Supply of 75mm PPR Core Flange conforming to DIN 148
866 MAT-02364 BMW-I.272 Each
Standards 8077/8090
Supply of 90mm PPR Core Flange conforming to DIN 380
867 MAT-02365 BMW-I.273 Each
Standards 8077/8091
Supply of 110mm PPR Core Flange conforming to DIN 491
868 MAT-02366 BMW-I.274 Each
Standards 8077/8092
Supply of 20mm PPR Elbow conforming to DIN Standards 17
869 MAT-02367 BMW-I.275 Each
8077/8084
Supply of 25mm PPR Elbow conforming to DIN Standards 21
870 MAT-02368 BMW-I.276 Each
8077/8085
Supply of 32mm PPR Elbow conforming to DIN Standards 39
871 MAT-02369 BMW-I.277 Each
8077/8086
Supply of 40mm PPR Elbow conforming to DIN Standards 69
872 MAT-02370 BMW-I.278 Each
8077/8087
Supply of 50mm PPR Elbow conforming to DIN Standards 130
873 MAT-02371 BMW-I.279 Each
8077/8088
Supply of 63mm PPR Elbow conforming to DIN Standards 253
874 MAT-02372 BMW-I.280 Each
8077/8089
Supply of 75mm PPR Elbow conforming to DIN Standards 410
875 MAT-02373 BMW-I.281 Each
8077/8090
Supply of 90mm PPR Elbow conforming to DIN Standards 762
876 MAT-02374 BMW-I.282 Each
8077/8091
Supply of 110mm PPR Elbow conforming to DIN Standards 1414
877 MAT-02375 BMW-I.283 Each
8077/8092
Supply of 20mm PPR Tee conforming to DIN Standards 16
878 MAT-02376 BMW-I.284 Each
8077/8084
Supply of 25mm PPR Tee conforming to DIN Standards 26
879 MAT-02377 BMW-I.285 Each
8077/8085
Supply of 32mm PPR Tee conforming to DIN Standards 47
880 MAT-02378 BMW-I.286 Each
8077/8086
Supply of 40mm PPR Tee conforming to DIN Standards 83
881 MAT-02379 BMW-I.287 Each
8077/8087
Supply of 50mm PPR Tee conforming to DIN Standards 147
882 MAT-02380 BMW-I.288 Each
8077/8088

238
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply of 63mm PPR Tee conforming to DIN Standards 300
883 MAT-02381 BMW-I.289 Each
8077/8089
Supply of 75mm PPR Tee conforming to DIN Standards 588
884 MAT-02382 BMW-I.290 Each
8077/8090
Supply of 90mm PPR Tee conforming to DIN Standards 853
885 MAT-02383 BMW-I.291 Each
8077/8091
Supply of 110mm PPR Tee conforming to DIN Standards 1477
886 MAT-02384 BMW-I.292 Each
8077/8092
Supply of 20mm PPR End Cap conforming to DIN 6
887 MAT-02385 BMW-I.293 Each
Standards 8077/8084
Supply of 25mm PPR End Cap conforming to DIN 9
888 MAT-02386 BMW-I.294 Each
Standards 8077/8085
Supply of 32mm PPR End Cap conforming to DIN 20
889 MAT-02387 BMW-I.295 Each
Standards 8077/8086
Supply of 40mm PPR End Cap conforming to DIN 33
890 MAT-02388 BMW-I.296 Each
Standards 8077/8087
Supply of 50mm PPR End Cap conforming to DIN 58
891 MAT-02389 BMW-I.297 Each
Standards 8077/8088
Supply of 63mm PPR End Cap conforming to DIN 124
892 MAT-02390 BMW-I.298 Each
Standards 8077/8089
Supply of 75mm PPR End Cap conforming to DIN 208
893 MAT-02391 BMW-I.299 Each
Standards 8077/8090
Supply of 90mm PPR End Cap conforming to DIN 331
894 MAT-02392 BMW-I.300 Each
Standards 8077/8091
Supply of 110mm PPR End Cap conforming to DIN 654
895 MAT-02393 BMW-I.301 Each
Standards 8077/8092
Supply of 25mm x 20mm PPR Reducer conforming to DIN 12
896 MAT-02394 BMW-I.302 Each
Standards 8077/8092
Supply of 32mm x 25mm PPR Reducer conforming to DIN 21
897 MAT-02395 BMW-I.303 Each
Standards 8077/8092
Supply of 32mm x 20mm PPR Reducer conforming to DIN 20
898 MAT-02396 BMW-I.304 Each
Standards 8077/8092
Supply of 40mm x 32mm PPR Reducer conforming to DIN 34
899 MAT-02397 BMW-I.305 Each
Standards 8077/8092
Supply of 40mm x 25mm PPR Reducer conforming to DIN 33
900 MAT-02398 BMW-I.306 Each
Standards 8077/8092
Supply of 40mm x 20mm PPR Reducer conforming to DIN 33
901 MAT-02399 BMW-I.307 Each
Standards 8077/8092
Supply of 50mm x 20mm PPR Reducer conforming to DIN 50
902 MAT-02400 BMW-I.308 Each
Standards 8077/8092
Supply of 50mm x 25mm PPR Reducer conforming to DIN 51
903 MAT-02401 BMW-I.309 Each
Standards 8077/8092
Supply of 50mm x 32mm PPR Reducer conforming to DIN 51
904 MAT-02402 BMW-I.310 Each
Standards 8077/8092
Supply of 50mm x 40mm PPR Reducer conforming to DIN 53
905 MAT-02403 BMW-I.311 Each
Standards 8077/8092

239
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply of 63mm x 20mm PPR Reducer conforming to DIN 114
906 MAT-02404 BMW-I.312 Each
Standards 8077/8092
Supply of 63mm x 25mm PPR Reducer conforming to DIN 114
907 MAT-02405 BMW-I.313 Each
Standards 8077/8092
Supply of 63mm x 32mm PPR Reducer conforming to DIN 116
908 MAT-02406 BMW-I.314 Each
Standards 8077/8092
Supply of 63mm x 40mm PPR Reducer conforming to DIN 117
909 MAT-02407 BMW-I.315 Each
Standards 8077/8092
Supply of 63mm x 50mm PPR Reducer conforming to DIN 118
910 MAT-02408 BMW-I.316 Each
Standards 8077/8092
Supply of 75mm x 40mm PPR Reducer conforming to DIN 170
911 MAT-02409 BMW-I.317 Each
Standards 8077/8092
Supply of 75mm x 50mm PPR Reducer conforming to DIN 171
912 MAT-02410 BMW-I.318 Each
Standards 8077/8092
Supply of 75mm x 63mm PPR Reducer conforming to DIN 217
913 MAT-02411 BMW-I.319 Each
Standards 8077/8092
Supply of 90mm x 63mm PPR Reducer conforming to DIN 415
914 MAT-02412 BMW-I.320 Each
Standards 8077/8092
Supply of 90mm x 75mm PPR Reducer conforming to DIN 440
915 MAT-02413 BMW-I.321 Each
Standards 8077/8092
Supply of 110mm x 63mm PPR Reducer conforming to DIN 554
916 MAT-02414 BMW-I.322 Each
Standards 8077/8092
Supply of 110mm x 75mm PPR Reducer conforming to DIN 646
917 MAT-02415 BMW-I.323 Each
Standards 8077/8092
Supply of 110mm x 90mm PPR Reducer conforming to DIN 695
918 MAT-02416 BMW-I.324 Each
Standards 8077/8092
Supply of 25mm x 20mm x 25mm PPR Reducer Tee 33
919 MAT-02417 BMW-I.325 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x 25mm x 32mm PPR Reducer Tee 57
920 MAT-02418 BMW-I.326 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x 20mm x 32mm PPR Reducer Tee 57
921 MAT-02419 BMW-I.327 Each
conforming to DIN Standards 8077/8092
Supply of 40mm x 20mm x 40mm PPR Reducer Tee 93
922 MAT-02420 BMW-I.328 Each
conforming to DIN Standards 8077/8092
Supply of 40mm x 25mm x 40mm PPR Reducer Tee 95
923 MAT-02421 BMW-I.329 Each
conforming to DIN Standards 8077/8092
Supply of 40mm x 32mm x 40mm PPR Reducer Tee 98
924 MAT-02422 BMW-I.330 Each
conforming to DIN Standards 8077/8092
Supply of 50mm x 20mm x 50mm PPR Reducer Tee 135
925 MAT-02423 BMW-I.331 Each
conforming to DIN Standards 8077/8092
Supply of 50mm x 25mm x 50mm PPR Reducer Tee 137
926 MAT-02424 BMW-I.332 Each
conforming to DIN Standards 8077/8092
Supply of 50mm x 32mm x 50mm PPR Reducer Tee 141
927 MAT-02425 BMW-I.333 Each
conforming to DIN Standards 8077/8092
Supply of 50mm x 40mm x 50mm PPR Reducer Tee 142
928 MAT-02426 BMW-I.334 Each
conforming to DIN Standards 8077/8092

240
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply of 63mm x 20mm x 63mm PPR Reducer Tee 391
929 MAT-02427 BMW-I.335 Each
conforming to DIN Standards 8077/8092
Supply of 63mm x 25mm x 63mm PPR Reducer Tee 393
930 MAT-02428 BMW-I.336 Each
conforming to DIN Standards 8077/8092
Supply of 63mm x 32mm x 63mm PPR Reducer Tee 399
931 MAT-02429 BMW-I.337 Each
conforming to DIN Standards 8077/8092
Supply of 63mm x 40mm x 63mm PPR Reducer Tee 405
932 MAT-02430 BMW-I.338 Each
conforming to DIN Standards 8077/8092
Supply of 63mm x 50mm x 63mm PPR Reducer Tee 412
933 MAT-02431 BMW-I.339 Each
conforming to DIN Standards 8077/8092
Supply of 75mm x 50mm x 75mm PPR Reducer Tee 552
934 MAT-02432 BMW-I.340 Each
conforming to DIN Standards 8077/8092
Supply of 75mm x 63mm x 75mm PPR Reducer Tee 562
935 MAT-02433 BMW-I.341 Each
conforming to DIN Standards 8077/8092
Supply of 90mm x 50mm x 90mm PPR Reducer Tee 743
936 MAT-02434 BMW-I.342 Each
conforming to DIN Standards 8077/8092
Supply of 90mm x 63mm x 90mm PPR Reducer Tee 791
937 MAT-02435 BMW-I.343 Each
conforming to DIN Standards 8077/8092
Supply of 110mm x 75mm x 110mm PPR Reducer Tee 1348
938 MAT-02436 BMW-I.344 Each
conforming to DIN Standards 8077/8092
Supply of 110mm x 90mm x 110mm PPR Reducer Tee 1402
939 MAT-02437 BMW-I.345 Each
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Female Threaded Adaptor 104
940 MAT-02438 BMW-I.346 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Female Threaded Adaptor 106
941 MAT-02439 BMW-I.347 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Female Threaded Adaptor 186
942 MAT-02440 BMW-I.348 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x ½” PPR Female Threaded Adaptor 190
943 MAT-02441 BMW-I.349 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x ¾” PPR Female Threaded Adaptor 195
944 MAT-02442 BMW-I.350 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x 1" PPR Female Threaded Adaptor 302
945 MAT-02443 BMW-I.351 Each
conforming to DIN Standards 8077/8092
Supply of 40mm x 1¼” PPR Female Threaded Adaptor 447
946 MAT-02444 BMW-I.352 Each
conforming to DIN Standards 8077/8092
Supply of 50mm x 1½” PPR Female Threaded Adaptor 625
947 MAT-02445 BMW-I.353 Each
conforming to DIN Standards 8077/8092
Supply of 63mm x 2" PPR Female Threaded Adaptor 831
948 MAT-02446 BMW-I.354 Each
conforming to DIN Standards 8077/8092
Supply of 75mm x 2½”PPR Female Threaded Adaptor 1602
949 MAT-02447 BMW-I.355 Each
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Male Threaded Adaptor 161
950 MAT-02448 BMW-I.356 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Male Threaded Adaptor 166
951 MAT-02449 BMW-I.357 Each
conforming to DIN Standards 8077/8092

241
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply of 25mm x ¾” PPR Male Threaded Adaptor 243
952 MAT-02450 BMW-I.358 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x ¾” PPR Male Threaded Adaptor 253
953 MAT-02451 BMW-I.359 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x 1" PPR Male Threaded Adaptor 470
954 MAT-02452 BMW-I.360 Each
conforming to DIN Standards 8077/8092
Supply of 40mm x 1¼” PPR Male Threaded Adaptor 551
955 MAT-02453 BMW-I.361 Each
conforming to DIN Standards 8077/8092
Supply of 50mm x 1½” PPR Male Threaded Adaptor 771
956 MAT-02454 BMW-I.362 Each
conforming to DIN Standards 8077/8092
Supply of 63mm x 2" PPR Male Threaded Adaptor 1185
957 MAT-02455 BMW-I.363 Each
conforming to DIN Standards 8077/8092
Supply of 75mm x 2½”PPR Male Threaded Adaptor 1896
958 MAT-02456 BMW-I.364 Each
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Female Threaded Elbow 111
959 MAT-02457 BMW-I.365 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Female Threaded Elbow 116
960 MAT-02458 BMW-I.366 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Female Threaded Elbow 179
961 MAT-02459 BMW-I.367 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x ½” PPR Female Threaded Elbow 171
962 MAT-02460 BMW-I.368 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x ¾” PPR Female Threaded Elbow 200
963 MAT-02461 BMW-I.369 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x 1" PPR Female Threaded Elbow 334
964 MAT-02462 BMW-I.370 Each
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Male Threaded Elbow 166
965 MAT-02463 BMW-I.371 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Male Threaded Elbow 183
966 MAT-02464 BMW-I.372 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Male Threaded Elbow 242
967 MAT-02465 BMW-I.373 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x ½” PPR Male Threaded Elbow 231
968 MAT-02466 BMW-I.374 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x1" PPR Male Threaded Elbow conforming 500
969 MAT-02467 BMW-I.375 Each
to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Female Threaded Tee 107
970 MAT-02468 BMW-I.376 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Female Threaded Tee 118
971 MAT-02469 BMW-I.377 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Female Threaded Tee 195
972 MAT-02470 BMW-I.378 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x ½” PPR Female Threaded Tee 207
973 MAT-02471 BMW-I.379 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x ¾” PPR Female Threaded Tee 231
974 MAT-02472 BMW-I.380 Each
conforming to DIN Standards 8077/8092

242
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)
Supply of 32mm x 1" PPR Female Threaded Tee 326
975 MAT-02473 BMW-I.381 Each
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Male Threaded Teeconforming 167
976 MAT-02474 BMW-I.382 Each
to DIN Standards 8077/8092
Supply of 25mm x ½” PPR Male Threaded Tee conforming 179
977 MAT-02475 BMW-I.383 Each
to DIN Standards 8077/8092
Supply of 25mm x ¾” PPR Male Threaded Tee conforming 255
978 MAT-02476 BMW-I.384 Each
to DIN Standards 8077/8092
Supply of 32mm x ½” PPR Male Threaded Tee conforming 263
979 MAT-02477 BMW-I.385 Each
to DIN Standards 8077/8092
Supply of 32mm x¾”PPR Male Threaded Tee conforming to 276
980 MAT-02478 BMW-I.386 Each
DIN Standards 8077/8092
Supply of 32mm x 1" PPR Male Threaded Tee conforming 510
981 MAT-02479 BMW-I.387 Each
to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Female Threaded Union 431
982 MAT-02480 BMW-I.388 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x¾”PPR Female Threaded Union 646
983 MAT-02481 BMW-I.389 Each
conforming to DIN Standards 8077/8092
Supply of 32mm x1”PPR Female Threaded Union 862
984 MAT-02482 BMW-I.390 Each
conforming to DIN Standards 8077/8092
Supply of 40mm x1¼”PPR Female Threaded Union 1208
985 MAT-02483 BMW-I.391 Each
conforming to DIN Standards 8077/8092
Supply of 50mm x 1½” PPR Female Threaded Union 1940
986 MAT-02484 BMW-I.392 Each
conforming to DIN Standards 8077/8092
Supply of 63mm x 2” PPR Female Threaded Union 3082
987 MAT-02485 BMW-I.393 Each
conforming to DIN Standards 8077/8092
Supply of 20mm x ½” PPR Male Threaded Union 494
988 MAT-02486 BMW-I.394 Each
conforming to DIN Standards 8077/8092
Supply of 25mm x¾”PPR Male Threaded Union conforming 656
989 MAT-02487 BMW-I.395 Each
to DIN Standards 8077/8092
Supply of 32mm x1”PPR Male Threaded Union conforming 862
990 MAT-02488 BMW-I.396 Each
to DIN Standards 8077/8092
Supply of 40mm x1¼”PPR Male Threaded Union 1076
991 MAT-02489 BMW-I.397 Each
conforming to DIN Standards 8077/8092
Supply of 50mm x 1½” PPR Male Threaded Union 2048
992 MAT-02490 BMW-I.398 Each
conforming to DIN Standards 8077/8092
Supply of 63mm x 2” PPR Male Threaded Union conforming 3449
993 MAT-02491 BMW-I.399 Each
to DIN Standards 8077/8092
Supply of 20mm PPR Union conforming to DIN Standards 93
994 MAT-02492 BMW-I.400 Each
8077/8092
Supply of 25mm PPR Union conforming to DIN Standards 110
995 MAT-02493 BMW-I.401 Each
8077/8092
Supply of 32mm PPR Union conforming to DIN Standards 182
996 MAT-02494 BMW-I.402 Each
8077/8092
Supply of 20mm PPR Ball Valve conforming to DIN 171
997 MAT-02495 BMW-I.403 Each
Standards 8077/8092

243
 Basic Rate
CFMS for SoR
Sl. No Code Item Code Description of item Unit 2024-25
(Rs.)

Supply of 25mm PPR Ball Valve conforming to DIN

998 MAT-02496 BMW-I.404 Each 215
Standards 8077/8092
Supply of 32mm PPR Ball Valve conforming to DIN
999 MAT-02497 BMW-I.405 Each 227
Standards 8077/8092
Supply of 40mm PPR Ball Valve conforming to DIN
1000 MAT-02498 BMW-I.406 Each 463
Standards 8077/8092
Supply of 50mm PPR Ball Valve conforming to DIN
1001 MAT-02499 BMW-I.407 Each 540
Standards 8077/8092
Supply of 63mm PPR Ball Valve conforming to DIN
1002 MAT-02500 BMW-I.408 Each 874
Standards 8077/8092
Supply of 75mm PPR Ball Valve conforming to DIN
1003 MAT-02501 BMW-I.409 Each 1437
Standards 8077/8092
Supply of 90mm PPR Ball Valve conforming to DIN
1004 MAT-02502 BMW-I.410 Each 2054
Standards 8077/8092
Supply of 20mm PPR Clamp conforming to DIN Standards
1005 MAT-02503 BMW-I.411 Each 9
8077/8092
Supply of 25mm PPR Clamp conforming to DIN Standards
1006 MAT-02504 BMW-I.412 Each 12
8077/8092
Supply of 32mm PPR Clamp conforming to DIN Standards
1007 MAT-02505 BMW-I.413 Each 15
8077/8092
Supply of 40mm PPR Clamp conforming to DIN Standards
1008 MAT-02506 BMW-I.414 Each 16
8077/8092

Labour charges for laying, joining, welding, fixing and

commissioning the PPR pipes including all specials such as
1009 LAB-00315 BMW-I.415 couplers/ bends/ tees etc including fixing necessary fittings 1 RM
35
like bends, plugs, couplers, junctions, tees, etc with welding
the joint as per standard practice - up to 40 mm dia

Labour charges for laying, joining, welding, fixing and

commissioning the PPR pipes including all specials such as
1010 LAB-00316 BMW-I.416 couplers/ bends/ tees etc including fixing necessary fittings 1 RM
like bends, plugs, couplers, junctions, tees, etc with welding 59
the joint as per standard practice - above 40 mm dia

Supply and fixing of UPVC Pipes and Fittings SCH-40

Grade to meet the requirement of ASTM-D 2846 for
hot and cold water (IS 15778:2007) including cost and
conveyance of all materials to site, labor charges for
fixing, overheads & contractors profit complete for
finished item of work at all floor levels.
BMW-I.417 65 mm OD Pipe 1 RM
807
BMW-I.418 80 mm OD Pipe 1 RM
966
BMW-I.419 1 RM
100 mm OD Pipe 1051
BMW-I.420 1 RM
125 mm OD Pipe 1236
BMW-I.421 1 RM
150 mm OD Pipe 1420

244
1
SCHEDULE OF RATES
2
 ELECTRICAL
AND
ELECTRO-MECHANICAL WORKS

PART III -BUILDINGS

FOR THE YEAR
2024-25

PREAMBLE FOR ELECTRICAL WORKS

1. Overheads and Contractor Profit and over head charges as mentioned in the
preamble for Buildings SoR 2024-25 (Civil and Electrical) is applicable to all original
electrical works subject to the fulfilment of conditions mentioned in Para 4.0 of
preamble.
2. Municipal Area Allowance, Agency or Tribal area allowance or any such allowance
on the labour components is applicable to Electrical works as per the Preamble for
Buildings SOR 2024-25.
3. The contractor is solely responsible for both quality and quantity.
4. Proposing specific make in the estimate from the SOR is within the scope of
concerned field officers based on the necessity and availability of materials in such
areas.
5. In case of 2way points i.e. stair case point etc where two way switch control is
necessary, an extra at 50 % excess over each point shall be allowed
6. Where ever the light/fan point is provided at a height/length of 15 feet and above,
then an extra of 50% over the point rates shall be allowed.
7. The rates for common civil items including labour rates have to be adopted from
prevailing SOR. 3
8. The rates for all types of electrical items proposed in SOR are exclusive of GST
(basic rates).
9. The rates for other items (Not covered in SoR) have to be invariably followed based
on the prevailing market rates, since the rates and specification varies from
manufacturer to manufacturer considerably. Hence, rates for certain items are not
incorporated in the SOR. However, relevant data without rates is provided in the
standard datas for electrical works.
10. In case of any addition/alteration/rectification to the proposed SOR, the approval has
to be obtained from the Chief Engineer R&B Electrical. Temporary approvals for
materials which are under relevant specifications of the BIS / IEC and BEE star
ratings can be given by the Chief Engineer (R&B) Electrical.
11. The Superintending Engineer (R&B) Electrical will review the performance over the
quality of the makes proposed in the SOR from time to time and in case any
inferior quality is observed the same shall be brought to the notice of the
Chief Engineer (R&B) Electrical to consider for deletion from the SOR.
12. The schedule of rates is only for guidance of officers for preparation of estimates as
per the Para 113 of APPWD code. The authority that sanctioned the estimate is
however responsible for adopting the proper rates in the estimates as envisaged in
para 45 of APPWD code.
13. As per GO Ms No.51 Industries and commence (MSME) Dept Dt:01.06.2010, all the
indenting departments / Agents should give preference to local MSME which are
manufacturing quality products having ISO 9001 – 2000, GEM, BIS certification

Chief Engineer(R&B) Electrical

Sl. INDEX
No.
SECTION - 1

1.1 M.S. CONDUIT PIPES

1.2 PVCCONDUITPIPES

1.3 METAL BOXES FOR SWITCHBOARDS

1.4 T.W. BOARDS

1.5 COPPER FLEXIBLECABLES

SERVICEMAINSANDFLAT CABLES OF ISI FOR

1.6
SUBMERSIBLEMOTORS.
1.7 FLUSH TYPESWITCHES AND ACCESSORIES

1.8 MODULARSWITCHESAND ACCESSORIES

4
 SECTION - 2

2.1 PANELMOUNTING SWITCHDISCONNECTOR FUSE UNITS

ON LOAD CHANGE OVER SWITCHES.(OPEN EXECUTION)

2.2

2.3 OFF LOAD CHANGEOVER SWITCHESIN SS ENCLOUSURE

2.4 AUTOTRANSFER SWITCH

2.5 REWIRABLE/ DOUBLEBREAK SWITCHESIN SS ENCLOSURE

2.6 HRCFUSELINKS (BOLTED TYPE)

2.7 PORCELAIN REWIRABLEFUSE UNITS.

2.8 VOLTAGESURGEPROTECTORS

2.9 PANELMOUNTING MCCBs/ ACBs/BUS DUCTs

2.10 MCBs

2.11 ISOLATORS

2.12 RCCBs

2.13 MCBDISTRIBUTIONBOARDS

SECTION - 3

3.1 STREET LIGHT LUMINAIRES

3.2 LED POST TOP LANTERN LUMINAIRES

5
SL. INDEX
NO.
ACCESSORIES FORMV / SV /MH LUMINAIRES i.e., COPPER
3.3 BALLASTS, ENEGRY SAVING ELECTRONIC BALLAST FOR
STREETLIGHT, CAPACITORS, IGNITORS
3.4 LAMPS

3.5 AUTOMATIC STREETLIGHT CONTROLSYSTEMS

3.6 INTERNALLUMINAIRES

3.7 FLOURSCENT / CFL LAMPS/LED BULBS

3.8 LED LUMINAIRES

SECTION - 4

4.1 U.G. CABLES

4.2 CABLETRAYS

4.3 DOUBLEWALLCORRUGATED HDPEPIPE

SECTION - 5

5.1 FANS

5.2 WATER HEATERS (CONVENTIONAL & SOLAR)

5.3 ACCESSORIES FOR WATER HEATERS

5.4 PUMPSETS AND ITS CONTROL PANEL BOARDS

5.5 AIR CONDITIONERS(SPLIT/CASETTEE)

5.6 HVACSYSTEMS(VRV/VRF)

5.7 EVAPORATIVEAIR COOLING SYSTEM

5.8 STABILIZERS

5.9 REPAIRING OF FANS, COOLERS, PUMPS, MOTORS, FRIDGES

AND AIR CONDITIONERS

SECTION - 6

SWAGED, OCTOGANALAND GRP POLES AND

6.1 ACCESSORIES.

6.2 LT PANELAND ACCESSORIES

Page 6 of 8
6.3 SUBSTATION EQUIPMENT AND TRANSFORMERS

6.4 MAINTENANCEAND REPAIRS OF TRANSFORMERS

6.5 OVERHEAD LINES AND LINE MATERIALS

6.6 LIGHNING PROTECTIVE SYSTEMS

6.7 EARTHINGS

SECTION - 7
7.1 LOCALAREA NETWORK

7.2 RACEWAYS AND JUNCTION BOXES

7.3 COMPUTERS, PRINTERS, SCANNERS

7.4 SMALL EPABX SYSTEM

7.5 LARGE EPABX SYSTEM

7.6 C.C.TV & SURVEILLANCE SYSTEM

7.7 PUBLIC ADDRESS SYSTEMS

7.8 AUDIO-VIDEO SYSTEMS

SECTION - 8

8.1 MISCELLANIOUS ITEMS

8.2 LEGEND PLATES

8.3 COPPER/ALUMINIUM/GI ITEMS

8.4 SMCTYPESUPPORTSFOR BUSBARS

8.5 LABOUR RATES

SECTION - 9

9.1 WIRELESS FIRE ALARAMSYSTEM

9.2 ADDRESSABLE - FIREALARAM SYSTEM

9.3 CONVENTIONAL - FIREALARAM SYSTEM

9.4 POWDER BASED FIRE EXTINGUISHERS

9.5 FIRE HYDRANT AND SPRINKLER SYSTEM

Page 7 of 8
 SECTION - 10
10.1 DIESEL GENERATORS

SECTION - 11

11.1 INVERTERS AND ONLINEUP S SYSTEMS

SECTION- 12

12.1 TEMPORARY ILLUMINATION

12.2 HIRING OF GENERATORS (TE-DG)

SECTION- 13

13 13.1 ,13.2 & 13.3 LIFTS & Dismantling

SECTION- 14
(Electrical items recommended by Chief Engineer (APMSIDC)
14.1 MEDICAL GAS PIPELINE SYSTEM

14.2. STP & ETP WORKS (ELECTRO-MECHANICAL ITEMS)

14.3 BUILDING MANAGEMENT SYSTEMS

14.4 ACCESS CONTROL SYSTEMS

14.5 NURSE-CALL SYSTEM

A-I List of recommended Brands / manufacturers

A-II General Guidelines

Page 8 of 8
SCHEDULED RATES FOR ELECTRICAL & ELECTRO MECHANICAL ITEMS SOR 2024-25

Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
SECTION - 1
1.1 M.S. CONDUIT PIPES
1 ELEC- Supply of ISI, ………... outer dia,…... thickness MS conduit pipe as per
1.1.1 lS-9537 Part ll .
Makes: As per list of recommended brands
MAT- a 20 mm (1.6 mm thick) 1 RM 134
02621
MAT- b 25 mm ( 1.6 mm thick) 1 RM 173
02622
MAT- c 32 mm ( 1.6 mm thick) 1 RM 246
02623
MAT- d 38 mm (2.0 mm thick) 1 RM 403
02624
MAT- e 50 mm ( 2.0 mm thick) 1 RM 515
02625
2 ELEC- Supply of ………... MS Junction box normal range big size long neck.
1.1.2
MAT- a 19/20 mm 1 No 38
02626
MAT- b 25 mm 1 No 45
02627
MAT- c 32 mm 1 No 104
02628
MAT- d 40/38 mm 1 No 149
02629
MAT- e 50 mm 1 No 284
02630
3 ELEC- Supply of ……….MS Junction deep box.
1.1.3
MAT- a 20/25 mm 1 No 98
02631
MAT- b 32 mm 1 No 173
02632
MAT- c 40 mm 1 No 209
Page 9 of 8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
02633
MAT- d 50 mm 1 No 254
02634
4 ELEC- Supply of ………. MS Inspection Bends.
1.1.4
MAT- a 19/20 mm 1 No 33
02635
MAT- b 25 mm 1 No 38
02636
MAT- c 32 mm 1 No 83
02637
MAT- d 40/38 mm 1 No 119
02638
MAT- e 50 mm 1 No 254
02639
5 ELEC- Supply of ……... MS Inspection Tee.
1.1.5
MAT- a 19/20 mm 1 No 38
02640
MAT- b 25 mm 1 No 45
02641
MAT- c 32 mm 1 No 104
02642
MAT- d 40/38 mm 1 No 128
02643
MAT- e 50 mm 1 No 261
02644
6 ELEC- Supply of …………. MS Inspection Elbow.
1.1.6
MAT- a 19/20 mm 1 No 33
02645
MAT- b 25 mm 1 No 45
02646
MAT- c 32 mm 1 No 83
02647

Page 10 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- d 40/38 mm 1 No 104
02648
MAT- e 50 mm 1 No 239
02649
7 ELEC- Supply of MS Inspection 10 Gauge G.I. check nut of size …………..
1.1.7
MAT- a 19/20 mm 100 298
02650 Nos
MAT- b 25 mm 100 373
02651 Nos
MAT- c 32 mm 100 745
02652 Nos
MAT- d 40/38 mm 100 1081
02653 Nos
MAT- e 50 mm 100 1804
02654 Nos
8 ELEC- Supply of ……………... Saddles with Base.
1.1.8
MAT- a 19/20 mm 100 321
02655 Nos
MAT- b 25 mm 100 336
02656 Nos
MAT- c 32 mm 100 566
02657 Nos
MAT- d 40/38 mm 100 933
02658 Nos
MAT- e 50 mm 100 1178
02659 Nos
9 ELEC- Supply of………...20 gauge Saddles.
1.1.9
MAT- a 19/20 mm 100 164
02660 Nos
MAT- b 25 mm 100 224
02661 Nos
MAT- c 32 mm 100 358
02662 Nos
Page 11 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- d 40/38 mm 100 463
02663 Nos
MAT- e 50 mm 100 566
02664 Nos
10 ELEC- Supply of ………... 16 Gauge socket coupler.
1.1.10
MAT- a 19/20 mm 12 90
02665 Nos
MAT- b 25 mm 12 119
02666 Nos
MAT- c 32 mm 12 194
02667 Nos
MAT- d 38 mm 12 254
02668 Nos
MAT- e 40mm 12 284
02669 Nos
MAT- f 50 mm 12 596
02670 Nos
11 ELEC- Supply of 19mm Ball Socket.
1.1.11
MAT- a 19 mm 12 343
02671 Nos

MAT- b 25 mm 12 521
02672 Nos
1.2 PVC CONDUITS
12 ELEC- Supply of ISI marked ………. heavy grade with IS:9537-part 3 rigid PVC
1.2.1 Conduit.
Makes: As per list of recommended brands
MAT- a 20 mm outer dia (1.95 - 2.10) mm thickness 1 RM 36
02673
MAT- b 25 mm outer dia (2.00 - 2.20) mm thickness 1 RM 46
02674
13 ELEC- Supply of ISI marked ……. medium grade with IS:9537-part 3 rigid PVC
1.2.2 Conduit.
Makes: As per list of recommended brands

Page 12 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- a 20mm outer dia (1.40 -1.55) mm thickness 1 RM 26
02675
MAT- b 25mm outer dia (1.60 -1.80) mm thickness 1 RM 36
02676
MAT- c 32mm outer dia (1.90 - 2.10) mm thickness 1 RM 56
02677
MAT- d 40mm outer dia (2.10 - 2.30) mm thickness 1 RM 75
02678
MAT- e 50mm outer dia (2.60 - 2.85) mm thickness 1 RM 107
02679
NOTE: Add 5% extra on above price for Red/Yellow/Blue/Black/Green Colour
PVC pipes for specific purpose Usage
14 ELEC- Supply of ISI marked ………. width and 12mm height Casing and Caping.
1.2.3 Makes: As per list of recommended brands

MAT- a 19/20 mm 1 RM 28
02680
MAT- b 25mm 1 RM 43
02681
MAT- c 32mm 1 RM 50
02682
MAT- d 38/40mm 1 RM 82
02683
15 ELEC- Supply of ……... dia FRPP corrugated Flexible conduit.
1.2.4 Makes: As per list of recommended brands
MAT- a 19/20 mm 1 RM 17
02684
MAT- b 25mm 1 RM 21
02685
MAT- c 32mm 1 RM 33
02686
MAT- d 38/40mm 1 RM 46
02687
MAT- e 50 mm 1 RM 76
02688

Page 13 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
16 ELEC- Supply of ………dia PVC Flexible Couplings for FRPP Corrugated
1.2.5 conduit.
Makes: As per list of recommended brands

MAT- a 19/20 mm 1 No 14
02689
MAT- b 25mm 1 No 21
02690
MAT- c 32mm 1 No 36
02691
MAT- d 40mm 1 No 43
02692
MAT- e 50 mm 1 No 78
02693
17 ELEC- Supply of…………dia PVC Junction Boxes confirms to IS : 3419
1.2.6 Makes: As per list of recommended brands

MAT- a 19/20 mm 1 No 27
02694
MAT- b 25mm 1 No 28
02695
MAT- c 32mm 1 No 50
02696
MAT- d 40mm 1 No 52
02697
MAT- e 50 mm 1 No 71
02698
18 ELEC- Supply of ………...dia PVC deep Junction Boxes confirms to IS: 3419.
1.2.7 Makes: As per list of recommended brands

MAT- a 19/20 mm 1 No 32
02699
MAT- b 25mm 1 No 36
02700
MAT- c 32mm 1 No 57
02701

Page 14 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- d 40/38 mm 1 No 62
02702
MAT- e 50 mm 1 No 90
02703
19 ELEC- Supply of ………………dia PVC Bends.
1.2.8 Makes: As per list of recommended brands

MAT- a 19/20 mm dia 1.5mm thick 1 No 9

02704
MAT- b 25mm dia 1.5mm thick 1 No 12
02705
MAT- c 32mm dia 2.0mm thick 1 No 26
02706
MAT- d 40 mm dia 2.0mm thick 1 No 28
02707
MAT- e 50 mm dia 2.0mm thick 1 No 41
02708
20 MAT- ELEC- Dummy Cover for PVC junction boxes 1 No 7
02709 1.2.9

21 ELEC- Supply and fixing of DLP PVC Mini trunking with independent cover on
1.2.10 wall/ ceiling ……… size (width & height) including cost of all accessories
like end caps, Internal/External angles, flat Angles, flat joints etc., with all
labour charges, transportation etc., complete.

a 25mm x 20 mm 1 RM 123

b 105/100 x 50 mm 1 RM 587

1.3 HOT DIP GALVANIZED METAL BOXES for

switch boards
22 ELEC- Supply of………. Hot Dip galvanized 18 SWG Module metal box with
1.3.1 earthing terminal
MAT- a 1 or 2 1 No 68
02710

MAT- b 3 1 No 95
02711
Page 15 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 4 1 No 114
02712
MAT- d 6 1 No 155
02713
MAT- e 8 or 9 1 No 203
02714
MAT- f 12 1 No 245
02715
METALLIC BOXES
23 ELEC- Supply of ………. size (length x width x depth)18 SWG sheet steel boxes
1.3.2 duly finished with two coats of zinc chromate red oxide paint and enamel
paint of matching colour to wall
MAT- a 100mmx100x50mm 1 No 61
02716
MAT- b 175mmx100x60mm 1 No 73
02717
MAT- c 150mmx150x60mm 1 No 85
02718
MAT- d 200mmx150x60mm 1 No 97
02719
MAT- e 200mmx250x75mm 1 No 121
02720
MAT- f 250mmx300x75mm 1 No 212
02721
MAT- g 300mmx375x100mm 1 No 273
02722
1.4 T.W. BOARDS
24 ELEC- Supply of T.W. Deep Box of Size
1.4.1
MAT- a 4" x 4" 1 No 13
02723
MAT- b 4" x 7 1 No 24
02724
MAT- c 6" x 6" 1 No 26
02725

Page 16 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- d 6" x 8" 1 No 39
02726
MAT- e 8" x 10" 1 No 65
02727
MAT- f 10" x 12" 1 No 91
02728
MAT- g 12" x 15" 1 No 142
02729
25 ELEC- Supply of Decolam Board of size
1.4.2
MAT- a 4" x 4" 1 No 20
02730
MAT- b 4" x 7 1 No 33
02731
MAT- c 6" x 6" 1 No 46
02732
MAT- d 6" x 8" 1 No 51
02733
MAT- e 8" x 10" 1 No 91
02734
MAT- f 10" x 12" 1 No 142
02735
MAT- g 12" x 15" 1 No 214
02736
26 ELEC- Supply of Peeta Boards of size
1.4.3
MAT- a 9" x 14" 1 No 65
02737
MAT- b 12" x 10" 1 No 72
02738
MAT- c 15" x 20" 1 No 246
02739
MAT- d 18" x 24" 1 No 356
02740
MAT- e 18" x 30" 1 No 440
02741
Page 17 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
27 ELEC- Supply of No.8 Screws of
1.4.4
MAT- a 12mm. 100 78
02742 Nos
MAT- b 25mm. 100 97
02743 Nos
MAT- c 30mm. 100 117
02744 Nos
MAT- d 35/38mm. 100 129
02745 Nos
MAT- e 50mm 100 151
02746 Nos
MAT- f 63/75mm. 100 181
02747 Nos
1.5 COPPER FLEXIBLE CABLES
(AS PER IS:694)
28 ELEC- Supply of………. ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC
1.5.1 insulated flexible copper cables 1100V grade as per IS: 694/1990 &
IS:17048/2018 specification for copper cable.
Makes: As per list of recommended brands as category I
MAT- a 1.0 Sq mm 100 1424
02748 RM
MAT- b 1.5 Sq mm 100 2046
02749 RM
MAT- c 2.5 Sq mm 100 3305
02750 RM
MAT- d 4.0 Sq mm 100 5046
02751 RM
MAT- e 6.0 Sq mm 100 7721
02752 RM
MAT- f 10.0 Sq mm 100 11920
02753 RM
MAT- g 16.0 Sq mm 100 18828
02754 RM
29 ELEC- Supply of………. ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC
1.5.2 insulated flexible copper cables 1100V grade as per IS: 694/1990 &

Page 18 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
IS:17048/2018 specification for copper cable.
Makes: As per list of recommended brands as category II
MAT- a 1.0 Sq mm 100 1254
02755 RM
MAT- b 1.5 Sq mm 100 1787
02756 RM
MAT- c 2.5 Sq mm 100 2899
02757 RM
MAT- d 4.0 Sq mm 100 4470
02758 RM
MAT- e 6.0 Sq mm 100 6908
02759 RM
MAT- f 10.0 Sq mm 100 10498
02760 RM
MAT- g 16.0 Sq mm 100 17473
02761 RM
30 ELEC- Supply of………. ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC
1.5.3 insulated flexible copper cables 1100V grade as per IS: 694/1990 &
IS:17048/2018 specification for copper cable.
Makes: As per list of recommended brands as category III
MAT- a 1.0 Sq mm 100 1083
02762 RM
MAT- b 1.5 Sq mm 100 1517
02763 RM
MAT- c 2.5 Sq mm 100 2438
02764 RM
MAT- d 4.0 Sq mm 100 3657
02765 RM
MAT- e 6.0 Sq mm 100 5689
02766 RM
MAT- f 10.0 Sq mm 100 9008
02767 RM
MAT- g 16.0 Sq mm 100 13816
02768 RM

SHEATHED FLEXIBLE COPPER CABLES

Page 19 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
31 ELEC- Supply of ……...ISI marked, PVC insulated and sheathed FRLS/FRLS-H
1.5.4 round copper cable for voltage up to 1100V as per IS 694/1990.
Makes: As per list of recommended brands as category I
MAT- a Single Core, 25 Sq mm 1 RM 298
05466
MAT- b Single Core, 35 Sq mm 1 RM 420
05467
MAT- c Single Core, 50 Sq mm 1 RM 596
05468
MAT- d Single Core, 70 Sq mm 1 RM 813
05469
MAT- e 2 core, 1.5 Sq mm 1 RM 61
02769
MAT- f 2 core, 2.5 Sq mm 1 RM 95
02770
MAT- g 2 core, 4.0 Sq mm 1 RM 129
02771
MAT- h 2 core, 6 Sq mm 1 RM 197
05470
MAT- i 2 core, 10 Sq mm 1 RM 285
05471
MAT- j 2 core, 16 Sq mm 1 RM 339
05472
MAT- k 3 core, 1.5 Sq mm 1 RM 82
02772
MAT- l 3 core, 2.5 Sq mm 1 RM 136
02773
MAT- m 3 core, 4.0 Sq mm 1 RM 190
02774
MAT- n 3 core, 6 Sq mm 1 RM 237
05473
MAT- o 3 core, 10 Sq mm 1 RM 313
05474
MAT- p 3 core, 16 Sq mm 1 RM 503
05475
MAT- q 4 core, 1.5 Sq mm 1 RM 109
Page 20 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
02775
MAT- r 4 core, 2.5 Sq mm 1 RM 170
02776
MAT- s 4 core, 4.0 Sq mm 1 RM 258
02777
MAT- t 4 core, 6 Sq mm 1 RM 378
05476
MAT- u 4 core, 10 Sq mm 1 RM 583
05477
MAT- v 4 core, 16 Sq mm 1 RM 739
05478
w 2 core, 1.0 Sq.mm 1 RM 31
x 4 core, 0.5 sq.mm 1 RM 99
z 12 core, 0.5 sq.mm 1 RM 202
32 ELEC- Supply of ……...ISI marked PVC insulated and sheathed FRLS/FRLS-H
1.5.5 round copper cable for voltage up to 1100V as per IS 694/1990.
Makes: As per list of recommended brands as category II
MAT- a Single Core, 25 Sq mm 1 RM 265
05479
MAT- b Single Core, 35 Sq mm 1 RM 386
05480
MAT- c Single Core, 50 Sq mm 1 RM 522
05481
MAT- d Single Core, 70 Sq mm 1 RM 751
05482
MAT- e 2 core, 1.5 Sq mm 1 RM 54
02778
MAT- f 2 core, 2.5 Sq mm 1 RM 82
02779
MAT- g 2 core, 4.0 Sq mm 1 RM 116
02780
MAT- h 2 core, 6 Sq mm 1 RM 182
05483
MAT- i 2 core, 10 Sq mm 1 RM 258
05484
Page 21 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- j 2 core, 16 Sq mm 1 RM 325
05485
MAT- k 3 core, 1.5 Sq mm 1 RM 75
02781
MAT- l 3 core, 2.5 Sq mm 1 RM 122
02782
MAT- m 3 core, 4.0 Sq mm 1 RM 162
02783
MAT- n 3 core, 6 Sq mm 1 RM 223
05486
MAT- o 3 core, 10 Sq mm 1 RM 291
05487
MAT- p 3 core, 16 Sq mm 1 RM 461
05488
MAT- q 4 core, 1.5 Sq mm 1 RM 95
02784
MAT- r 4 core, 2.5 Sq mm 1 RM 136
02785
MAT- s 4 core, 4.0 Sq mm 1 RM 216
02786
MAT- t 4 core, 6 Sq mm 1 RM 352
05489
MAT- u 4 core, 10 Sq mm 1 RM 535
05490
MAT- v 4 core, 16 Sq mm 1 RM 698
05491
w 2 core, 1.0 sq.mm 1 RM 26
x 4 core, 0.5 sq.mm 1 RM 31

y 12 core, 0.5 sq.mm 1 RM 49

33 MAT- ELEC- Supply of ISI marked 23 / 0060 twin core twisted / 100 1288
02787 1.5.6 a flat heavy Copper wire. RM
Makes: As per list of recommended brands.

Page 22 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
34 ELEC- Supply of ISI marked 23 / 0060 three core twisted / 100 1679
1.5.6 b flat heavy Copper wire. RM
Makes: As per list of recommended brands.

35 ELEC- Supply and Transportation of RG 6 co-axial cable for 1 RM 30

1.5.7 TVs.
Makes: As per list of recommended brands as
category I.
36 ELEC- Supply and Transportation of RG 6 co-axial cable for 1 RM 16
1.5.8 TVs.
Makes: As per list of recommended brands as
category II.
1.6 SERVICE MAINS AND FLAT CABLE FOR
SUBMERSIBLE MOTORS.
37 ELEC- Supply of ……...ISI marked WPSC (Weatherproof Single Core) ISI
1.6.1 Aluminum Wire.
Makes: As per list of recommended brands.
MAT- a 2.5 Sq mm 100 911
02788 RM
MAT- b 6 Sq mm 100 1816
02789 RM
MAT- c 10 Sq mm 100 1980
02790 RM
MAT- d 16 Sq mm 100 3300
02791 RM
38 ELEC- Supply of ………. ISI marked WPTC (Weatherproof Twin Core) ISI
1.6.2 Aluminum Wire.
Makes: As per list of recommended brands.
MAT- 6 Sq mm 100 3696
02792 RM
MAT- 10 Sq mm 100 4469
02793 RM
16 Sq mm 100 6900
RM
39 ELEC- Supply of 3 Core…………ISI marked Flat Copper cable of ISI for
1.6.3 Submersible Motors confirming to IS: 694:1990.
Makes: As per list of recommended brands as category I

Page 23 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- a 1.5 Sq mm 1 RM 75
02794
MAT- b 2.5 Sq mm 1 RM 109
02795
MAT- c 4.0 Sq mm 1 RM 170
02796

MAT- d 6.0 Sq mm 1 RM 244

02797
MAT- e 10.0 Sq mm 1 RM 386
02798
MAT- f 16.0 Sq mm 1 RM 507
02799
40 ELEC- Supply of 3 Core…………. ISI marked, Flat Copper cable of ISI for
1.6.4 Submersible Motors confirming to IS:694:1990.
Makes: As per list of recommended brands as category II
MAT- a 1.5 Sq mm 1 RM 68
02800
MAT- b 2.5 Sq mm 1 RM 98
02801
MAT- c 4.0 Sq mm 1 RM 151
02802
MAT- d 6.0 Sq mm 1 RM 216
02803
MAT- e 10.0 Sq mm 1 RM 352
02804
MAT- f 16.0 Sq mm 1 RM 461
02805
1.7 FLUSH TYPE SWITCHES AND ACCESSORIES
41 ELEC- Supply of …………………. ISI marked.
1.7.1 Makes: As per list of recommended brands.

MAT- a 6A, 1 Way flush type Switch. 1 No 18

02806
MAT- b 6A, 2 Way flush type Switch. 1 No 22
02807

Page 24 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 6A, 2 pin flush type Socket. 1 No 21
02808
MAT- d 6A, 3 pin flush type Socket with shutter. 1 No 27
02809
MAT- e 6A, flush type Neon Indicator. 1 No 21
02810
MAT- f 6A, Triangle Plug Top of 1 No 35
02811
MAT- g 1 Way, flush type Bed Switch / Bell Push. 1 No 22
02812
MAT- h 16A, flush type Switch. 1 No 69
02813
MAT- i 16A, flush type Socket with shutter. 1 No 69
02814
MAT- j 16A, flush type Switch Socket combined (2 in one). 1 No 104
02815
MAT- k 16A, Triangle Plug Top 1 No 53
02816
MAT- l Step type Electronic Regulator, Socket size of 1 No 208
02817 wattage 100/120W.

MAT- m 3 Plate Jumbo Ceiling Rose. 1 No 22

02818
MAT- n BH / SBH. 1 No 21
02819
MAT- o Pendent Holder / Adopter. 1 No 18
02820
MAT- p Telephone Jack with Connector. 1 No 53
02821
MAT- q TV Antenna Outlet. 1 No 29
02822
MAT- r 15A/10A Flush type Fuse. 1 No 35
02823
MAT- s 32A DP Flush type. 1 No 110
02824

Page 25 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- t Calling Bell. 1 No 76
02825
MAT- u Buzzer. 1 No 64
02826
MAT- v Ding Dong Bell. 1 No 156
02827
MAT- w Electronic Musical Bell. 1 No 254
02828
MAT- x Remote Bell. 1 No 734
02829
MAT- y MC Holder. 1 No 23
02830
MAT- z Spike Guard with 1 No Switch and 4 Nos Sockets. 1 No 404
02831
MAT- A Spike Guard with 4 No Switches and 4 Nos Sockets. 1 No 578
02832
1.8 MODULAR SWITCHES AND ACCESSORIES
42 ELEC- Supply of …………. ISI marked
1.8.1 Makes: As per list of recommended brands as category I.

MAT- a 6A / 10A, 1 Way, 1 Module, Modular Switch. 1 No 72

02833
MAT- b 6A / 10A, 2 Way, 1 Module, Modular Switch. 1 No 80
02834
MAT- c 6A / 10A, 2 Pin, 2 Module, Modular Socket. 1 No 80
02835
MAT- d 6A / 10A, 3-Pin, 2 Module, Modular Socket with 1 No 122
02836 shutter.
MAT- e 6A / 10A, 1 Module, Modular Switch with Neon 1 No 99
02837 Indicator.
MAT- f 6A / 10A, Modular Bell Push with Neon Indicator. 1 No 117
02838
MAT- g 16A / 10A, Modular Flush Fuse with Neon Indicator. 1 No 124
02839
MAT- h 16A / 20A, 1 Way, 1 Module, Modular Switch. 1 No 124
02840
Page 26 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- i 16A / 20A, 2 Way, 1 Module, Modular Switch. 1 No 135
02841
MAT- j 20A, 1 Way, 1 Module, Modular Switch with 1 No 135
02842 Indicator.
MAT- k 20A, Modular Socket with shutter. 1 No 189
02843
MAT- l 16A/6A, 1 way, Combi Socket Modular Socket with 1 No 193
02844 shutter
MAT- m Deleted 1 No
02845
MAT- n 2 Module Modular type electronic step type Fan 1 No 421
02846 Regulator.
MAT- o Modular socket type Telephone jack with Connector 1 No 84
02847
MAT- p Modular co-Axial socket type TV Antenna outlet. 1 No 84
02848
MAT- q Push type button motor starter for A.C Units 1 No 678
02849
MAT- r 32A Modular type Double pole Switch with indicator 1 No 298
08755
MAT- s One Module PVC Blanking plate 1 No 21
08756
MAT- t Skirting Light with LED 230V 3 Module 1 No 149
08757
43 ELEC- Supply of ……………………………………. ISI marked.
1.8.2 Makes: As per list of recommended brands as category II
MAT- a 6A / 10A, 1 Way, 1 Module Modular Switch. 1 No 52
02850
MAT- b 6A / 10A, 2 Way, 1 Module Modular Switch. 1 No 61
02851
MAT- c 6A / 10A, 2 Pin, 2 Module Modular Socket. 1 No 61
02852
MAT- d 6A / 10A, 3- Pin, 2 Module Modular Socket with 1 No 94
02853 shutter.
MAT- e 6A / 10A, 1 Module, Modular Switch with Neon 1 No 65
02854 Indicator.
Page 27 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- f 6A / 10A, Modular Bell Push with Neon Indicator. 1 No 75
02855
MAT- g 16A / 10A, Modular Flush Fuse with Neon Indicator. 1 No 82
02856
MAT- h 16A / 20A, 1 Way, 1 Module Modular Switch. 1 No 82
02857
MAT- i 16A / 20A, 2 Way, 1 Module Modular Switch. 1 No 92
02858
MAT- j 20A, 1 Way, 1 Module, Modular Switch with 1 No 86
02859 Indicator.
MAT- k 20A Modular Socket with shutter. 1 No 159
02860
MAT- l 16A/6A, 1 way, Combi Socket Modular Socket with 1 No 159
02861 shutter
MAT- m Deleted 1 No
02862
MAT- n 2 Module, Modular type, electronic step type Fan 1 No 342
02863 Regulator.
MAT- o Modular socket type Telephone jack with Connector 1 No 56
02864
MAT- p Modular co-Axial socket type TV Antenna outlet. 1 No 56
02865
MAT- q Push type button motor starter for A.C Units 1 No 632
02866
MAT- r 32A Modular type Double pole Switch with indicator 1 No 255
08758
MAT- s One Module PVC Blanking plate 1 No 17
08759
MAT- t Skirting Light with LED 230V 3 Module 1 No 128
08760
COVER FRAMES
44 ELEC- Supply of ………….
1.8.3 Makes: As per list of recommended brands as category I.
MAT- a 1 or 2 Modular Cover Frame. 1 No 76
02867

Page 28 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b 3 Modular Cover Frame. 1 No 89
02868
MAT- c 4 Modular Cover Frame. 1 No 101
02869
MAT- d 6 Modular Cover Frame. 1 No 152
02870
MAT- e 8 Modular Horizontal / Vertical Cover Frame. 1 No 197
02871
MAT- f 12 Modular Vertical Cover Frame. 1 No 240
02872
45 ELEC- Supply of ………….
1.8.4 Makes: As per list of recommended brands as category II
MAT- a 1 or 2 Modular Cover Frame. 1 No 63
02873
MAT- b 3 Modular Cover Frame. 1 No 76
02874
MAT- c 4 Modular Cover Frame. 1 No 89
02875
MAT- d 6 Modular Cover Frame. 1 No 127
02876
MAT- e 8 Modular Horizontal / Vertical Cover Frame. 1 No 159
02877
MAT- f 12 Modular Vertical Cover Frame. 1 No 190
02878
SECTION - 2
2.1 PANEL MOUNTING SWITCH DISCONNECTOR
FUSE UNITS (SDFU)
46 ELEC- Supply of ………ISI marked TPN Switch Disconnector Fuse Unit, Cubical
2.1.1 type without fuses as per IS: 13947/IEC 60947-3
Makes: As per list of recommended brands as category I.
MAT- a 32A 1 No 1543
02879

MAT- b 63A 1 No 2635

02880
MAT- c 125A 1 No 6291
Page 29 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
02881
MAT- d 200A 1 No 8249
02882
MAT- e 250A 1 No 9851
02883
MAT- f 400A 1 No 15192
02884
MAT- g 630A 1 No 25756
02885
47 ELEC- Supply of ………. ISI marked TPN Switch Disconnector Fuse Unit,
2.1.2 Cubical type without fuses as per IS: 13947/IEC 60947-3
Makes: As per list of recommended brands as category II
MAT- a 32A 1 No 1306
02886
MAT- b 63A 1 No 1935
02887
MAT- c 125A 1 No 4332
02888
MAT- d 200A 1 No 6528
02889
MAT- e 250A 1 No 7359
02890
MAT- f 400A 1 No 11276
02891
MAT- g 630A 1 No 18872
02892
2.2 ON LOAD CHANGEOVER SWITCHES
(OPEN EXECUTION)

48 ELEC- Supply of ……. ISI marked 4 Pole Change Over Switch on Load with
2.2.1 open Execution as per IS:13947
Makes: As per list of recommended brands as category I.
MAT- a 63A 1 No 5839
02893
MAT- b 125A 1 No 10967
02894

Page 30 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 200A 1 No 14670
02895
MAT- d 250A 1 No 20936
02896
MAT- e 400A 1 No 31619
02897
MAT- f 630A 1 No 37744
02898
49 ELEC- Supply of ……... ISI marked 4 Pole Change Over Switch on Load with
2.2.2 open Execution as per IS:13947
Makes: As per list of recommended brands as category II.
MAT- a 32 A 1 No 2136
02899
MAT- b 63A 1 No 5270
02900
MAT- c 125A 1 No 10397
02901
MAT- d 200A 1 No 13531
02902
MAT- e 250A 1 No 19228
02903
MAT- f 400A 1 No 29626
02904
MAT- g 630A 1 No 34895
02905
2.3 OFF LOAD CHANGE OVER SWITCHES IN SS
ENCLOUSURE

50 ELEC- Supply of ………... Off load Changeover Switch in sheet steel enclosure
2.3.1 as per IS:13947
Makes : As per list of recommended brands as category I
a 32A 240V DP 1 No 1632

b 63A 415V FP 1 No 5614

Page 31 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
c 100A 415V FP 1 No 9857

51 ELEC- Supply of ………... Off load Changeover Switch in sheet steel enclosure
2.3.2 as per IS:13947
Makes : As per list of recommended brands as category I
a 32A 240V DP 1 No 947

b 63A 415V FP 1 No 3264

c 100A 415V FP 1 No 6136

ON LOAD CHANGE OVER SWITCHES IN SS

ENCLOUSURE
52 ELEC- Supply of ………...ISI marked 4 pole On load Changeover Switch in
2.3.3 sheet steel enclosure as per IS:13947
Makes: As per list of recommended brands as category I
MAT- a 63A 1 No 7380
02906
MAT- b 125A 1 No 13564
02907
MAT- c 200A 1 No 17084
02908
53 ELEC- Supply of ………. ISI marked 4 pole On load Changeover Switch in sheet
2.3.4 steel enclosure as per IS:13947
Makes: As per list of recommended brands as category II
MAT- a 63A 1 No 6642
02909
MAT- b 125A 1 No 12208
02910

MAT- c 200A 1 No 15376

02911
2.4 AUTO TRANSFER SWITCH

Page 32 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
54 ELEC- Supply of …… auto transfer switch for instantaneous switching
2.4.1 between sources as per IEC 60947-6-1, Closed transition, (bare unit-
without enclosure) with voltage surge suppressor, communication
interface etc., complete.
Makes: As per list of recommended brands.
MAT- a 125A, 415VAC, FP 1 No 41542
02912
MAT- b 160A, 415VAC FP 1 No 43322
02913
MAT- c 200A 415VACFP 1 No 54005
02914
MAT- d 250A, 415VAC FP 1 No 60571
02915
MAT- e 315A, 415VAC FP 1 No 63318
02916
MAT- f 400A, 415VAC FP 1 No 72485
02917
55 ELEC- Supply of ………. auto transfer switch for instantaneous switching
2.4.2 between sources as per IEC 60947-6-1, Closed transition, (bare unit-
without enclosure) with voltage surge suppressor, communication
interface etc., complete.
Makes: As per list of recommended brands.
MAT- a 630A,415VAC FP 1 No 93012
02918
MAT- b 800A, 415VAC FP 1 No 118690
02919
MAT- c 1000A,415VAC FP 1 No 147176
02920
MAT- d 1250A, 415VAC FP 1 No 182783
02921
MAT- e 1600 A, 415VAC FP 1 No 226698
02922
MAT- f 2000 A, 415VAC FP 1 No 331145
02923
MAT- g 2500 A, 415VAC FP 1 No 365565
02924
MAT- h 3200 A, 415VAC FP 1 No 470012
Page 33 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
02925
2.5 REWIRABLE / DOUBLE BREAK SWITCHES IN SS
ENCLOSURE

56 ELEC- Supply of ……... ISI marked Rewireable Fuse Switch in SS enclosure as

2.5.1 per IS:13947
Makes: As per list of recommended brands as category I

MAT- a 32A 240V SPN 1 No 1080

02926
MAT- b 32A 415V TPN 1 No 2413
02927
MAT- c 63A 415V TPN 1 No 4953
02928
MAT- d 100A 415V TPN 1 No 9144
02929
57 ELEC- Supply of ………. Double Break Switch in SS enclosure without fuses as
2.5.2 per IS:13947
Makes: As per list of recommended brands as category II
MAT- a 100A 415V TPN 1 No 8226
02930
MAT- b 200A 415V TPN 1 No 11834
02931
58 ELEC- Supply of ……. …. Rewireable Fuse Switch in SS enclosure as per
2.5.3 IS:13947
Makes: As per list of recommended brands as category I
MAT- a 32A 240V SPN 1 No 762
02932
MAT- b 32A 415V TPN 1 No 1168
02933
MAT- c 63A 415V TPN 1 No 2794
02934
MAT- d 100A 415V TPN 1 No 5334
02935
59 ELEC- Supply of ………...Double Break Switch in SS enclosure without fuse as
2.5.4 per IS:13947
Makes: As per list of recommended brands as category II
Page 34 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5

MAT- a 100A 415V TPN 1 No 5461

02936
MAT- b 200A 415V TPN 1 No 8890
02937
2.6 HRC FUSE LINKS (DIN/BOLTED TYPE)
60 ELEC- Supply of……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC
2.6.1 60269- Part 2
Makes: As per list of recommended brands as category I

MAT- a 6A to 35 A 1 No 63
02938
MAT- b 45A to 63A 1 No 96
02939
MAT- c 100 A to 160 A 1 No 299
02940
MAT- d 250A to 350A 1 No 444
02941
MAT- e 400A 1 No 845
02942
MAT- f 630A 1 No 1690
05457
2.7 PORCELAIN REWIRABLE FUSE UNITS.
61 ELEC- Supply of …... Porcelain Rewireable Fuse Units.
2.7.1 Makes: As per list of recommended brands.

MAT- a 32A, 240V 1 No 140

02943
MAT- B 32A, 415V 1 No 209
02944
MAT- C 63A, 415V 1 No 350
02945
MAT- D 100A, 415V 1 No 726
02946

Page 35 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
62 ELEC- Supply of……... Porcelain Rewireable Fuse Units with extension strip.
2.7.2 Makes: As per list of recommended brands.

MAT- A 200A, 415V 1 No 1188

02947
MAT- B 300A, 415V 1 No 1537
02948
2.8 VOLTAGE SURGE PROTECTORS
63 ELEC- Supply of ………... Voltage Surge Protector, confirms to IEC/EN 61643-
2.8.1 11.
Makes: As per list of recommended brands.

MAT- A 2 Pole 2 Module 40 KA, 1.4 KV 1 No 8308

02949
MAT- B 4 Pole 4 Module 40 KA, 1.4 KV 1 No 15579
02950
MAT- C 2 Pole 2 Module 15 KA, 1.2 KV 1 No 6647
02951
MAT- D 4 Pole 4 Module 15 KA, 1.2 KV 1 No 12462
02952
2.9 PANEL MOUNTING MCCBs
64 ELEC- Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part
2.9.1 1 & 2, having Breaking Capacity ………. with thermal magnetic release
Panel Mounted.
Makes: As per list of recommended brands as category I
MAT- A 63-100A 3 Pole MCCB,16 KA 1 No 7744
02953
MAT- B 63-100A 4 Pole MCCB,16 KA 1 No 8349
02954
MAT- C 125A 3 Pole MCCB,25 KA 1 No 9075
02955
MAT- D 125A 4 Pole MCCB,25 KA 1 No 10527
02956
MAT- E 160A 3 Pole MCCB,25 KA 1 No 11495
02957
MAT- F 160A 4 Pole MCCB,25 KA 1 No 14762
Page 36 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
02958
MAT- G 250A 3 Pole MCCB,36/35 KA 1 No 18755
02959
MAT- H 250A 4 Pole MCCB,36/35 KA 1 No 24745
02960
MAT- I 400A 3 Pole MCCB,36/35 KA 1 No 24613
02961
MAT- J 400A 4 Pole MCCB,36/35 KA 1 No 30855
02962
MAT- K 630A 3 Pole MCCB,50 KA 1 No 36905
02963
MAT- L 630A 4 Pole MCCB,50 KA 1 No 45375
02964
MAT- M 800A 3 Pole MCCB,50 KA 1 No 67760
02965
MAT- N 800A 4 Pole MCCB,50 KA 1 No 72600
02966
O 16 - 50A 3 Pole MCCB, 16KA 1 No 6133
P 16 - 50A 4 Pole MCCB, 16KA 1 No 7700
Q 200A 3 Pole MCCB,25 KA 1 No 13484
R 200A 4 Pole MCCB,25 KA 1 No 17150
S 300/320A 3 Pole MCCB,36/35 KA 1 No 24915
T 300/320A 4 Pole MCCB,36/35 KA 1 No 29260
U 500A 3 Pole MCCB,50 KA 1 No 35182
V 500A 4 Pole MCCB,50 KA 1 No 44543
64 ELEC- Supply of ………., adjustable, confirms to IEC 60947-2 and IS 13947-Part
2.9.2 1 & 2, having Breaking Capacity ………. with thermal magnetic release
Panel Mounted.
Makes: As per list of recommended brands as category II
MAT- A 63-100A 3 Pole MCCB,16 KA 1 No 5445
02967
MAT- B 63-100A 4 Pole MCCB,16 KA 1 No 7079
02968

Page 37 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- C 125A 3 Pole MCCB,25 KA 1 No 6897
02969
MAT- D 125A 4 Pole MCCB,25 KA 1 No 9015
02970
MAT- E 160A 3 Pole MCCB,25 KA 1 No 9438
02971
MAT- F 160A 4 Pole MCCB,25 KA 1 No 12463
02972
MAT- G 250A 3 Pole MCCB,36/35 KA 1 No 18392
02973
MAT- H 250A 4 Pole MCCB,36/35 KA 1 No 22264
02974
MAT- I 400A 3 Pole MCCB,36/35 KA 1 No 23111
02975
MAT- J 400A 4 Pole MCCB,36/35 KA 1 No 27709
02976
MAT- K 630A 3 Pole MCCB,50 KA 1 No 32670
02977
MAT- L 630A 4 Pole MCCB,50 KA 1 No 39446
02978
MAT- M 800A 3 Pole MCCB,50 KA 1 No 56265
02979
MAT- N 800A 4 Pole MCCB,50 KA 1 No 62920
02980
O 16 - 50A 3 Pole MCCB, 16KA 1 No 3662
P 16 - 50A 4 Pole MCCB, 16KA 1 No 4322
Q 200A 3 Pole MCCB,25 KA 1 No 12604
R 200A 4 Pole MCCB,25 KA 1 No 16189
S 300/320A 3 Pole MCCB,36/35 KA 1 No 21991
T 300/320A 4 Pole MCCB,36/35 KA 1 No 27019
U 500A 3 Pole MCCB,50 KA 1 No 29295
V 500A 4 Pole MCCB,50 KA 1 No 36288

Page 38 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
PANEL MOUNTING ACBs (Microprocessor
Based)
66 ELEC- Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and
2.9.3 BS-EN 60947 with Micro processer based having overload, shot circuit
and earth fault protection with display and 20 faults History backup with
BMS compatible communication ports.
Makes: As per list of recommended brands as category I
MAT- a 630A, 3 Pole, 50kA, electrically operated, fixed type 1 No 138220
02981
MAT- b 630A, 3 Pole, 50kA, electrically operated, manually 1 No 158458
02982 draw out type

MAT- c 630A, 4 Pole, 50kA, electrically operated, fixed type 1 No 165297

02983
MAT- d 630A, 4 Pole, 50kA electrically operated, manually 1 No 198847
02984 draw out type
MAT- e 800A, 3 Pole, 50kA electrically operated, manually 1 No 158458
02985 draw out type
MAT- f 800A, 4 Pole, 50kA electrically operated, manually 1 No 200542
02986 draw out type
MAT- g 1000A, 3 Pole, 50kA electrically operated, manually 1 No 164805
02987 draw out type
MAT- h 1000A, 4 Pole, 50kA electrically operated, manually 1 No 208263
02988 draw out type
MAT- i 1250A, 3 Pole, 50kA electrically operated, manually 1 No 181805
02989 draw out type
MAT- j 1250A, 4 Pole, 50kA electrically operated, manually 1 No 229424
02990 draw out type
MAT- k 1600A, 3 Pole, 50kA electrically operated, manually 1 No 206771
02991 draw out type
MAT- l 1600A, 4 Pole, 50kA electrically operated, manually 1 No 254297
02992 draw out type
MAT- m 2000A, 3 Pole, 75kA electrically operated, manually 1 No 242873
02993 draw out type
MAT- n 2000A, 4 Pole, 75kA electrically operated, manually 1 No 298322
02994 draw out type

Page 39 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- o 2500A, 3 Pole, 75kA electrically operated, manually 1 No 300246
02995 draw out type
MAT- p 2500A, 4 Pole, 75kA electrically operated, manually 1 No 361814
02996 draw out type
MAT- q 3200A, 3 Pole, 75kA electrically operated, manually 1 No 339653
02997 draw out type
MAT- r 3200A, 4 Pole, 75kA electrically operated, manually 1 No 401220
02998 draw out type
67 ELEC- Supply of Air Circuit Breaker confirms to IS 13947-2, IEC 60947-2 and
2.9.4 BS-EN 60947 with Micro processer based having overload, shot circuit
and earth fault protection with display and 20 faults History backup with
BMS compatible communication ports.
Makes: As per list of recommended brands as category II
MAT- a 630A, 3 Pole, 50kA, electrically operated, fixed type 1 No 124398
02999
MAT- b 630A, 3 Pole, 50kA, electrically operated, manually 1 No 142612
03000 draw out type
MAT- c 630A, 4 Pole, 50kA, electrically operated, fixed type 1 No 148767
03001
MAT- d 630A, 4 Pole, 50kA electrically operated, manually 1 No 178963
03002 draw out type
MAT- e 800A, 3 Pole, 50kA electrically operated, manually 1 No 142612
03003 draw out type
MAT- f 800A, 4 Pole, 50kA electrically operated, manually 1 No 180488
03004 draw out type
MAT- g 1000A, 3 Pole, 50kA electrically operated, manually 1 No 148325
03005 draw out type
MAT- h 1000A, 4 Pole, 50kA electrically operated, manually 1 No 187436
03006 draw out type
AIR INSULATED BUS DUCT

Page 40 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
68 ELEC- Supply, installation, testing and commissioning of ........Amp, ........KA
2.9.5 breaking capacity (100% Neutral busbar) air insulated compact
Raising mains/Bus Duct system made of CRCA sheet/Hot Galvanized
steel encloser of thickness not less than 0.8 mm having degree of
protection of IP 55 as per IEC/EN 61439-6, PVC/Plastic insulated
reinforced with glass fibre four strip ALUMINIUM busbar in convenient
sections including necessary end cover units suitable for 415 volts 3
phase, 4 wire, 50 Hz A.C. System etc., with necessary joints Fire barrier
at each floor Provision of tapping at each floor/every meter, continuous
earthing with 2 no aluminum strip of suitable size (one on each side0
including GI clamping brackets, angle iron brackets, steel fasteners,
connecting to earth system as required .
Makes: As per list of recommended brands.
MAT- a 400Amp, 50 - 53KA RM 12566
03007
MAT- b 630Amp, 50 - 63KA RM 14936
03008
MAT- c 800 Amp, 50 - 76KA RM 16372
03009
MAT- d 1000 Amp, 50 - 76KA RM 18813
03010
MAT- e 1250 Amp, 50 - 76KA RM 19676
03011
MAT- f 1600 Amp, 50 - 76KA RM 24703
03012
69 MAT- ELEC- Supply and Fixing of Spring Bracket with fixing kit for 1 No 7468
03013 2.9.6 Air Insulated Busduct / Raising Mains.
Makes: As per list of recommended brands.
70 ELEC- Supply and fixing of ……. Amps Horizontal / Vertical bends for Air
2.9.7 Insulated Bus Duct.
Makes: As per list of recommended brands.
MAT- a 400 Amps 1 No 14362
03014
MAT- b 630 Amps 1 No 16372
03015
MAT- c 800 Amps 1 No 17090
03016
MAT- d 1000Amps 1 No 20034

Page 41 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03017
MAT- e 1250 Amps 1 No 21542
03018
MAT- f 1600 Amps 1 No 24415
03019
71 ELEC- Supply and fixing of …...Amps Tap off box for Air Insulated Busduct.
2.9.8 Makes: As per list of recommended brands.

MAT- a 125A 1 No 17090

03020
MAT- b 250A 1 No 19819
03021
MAT- c 400A 1 No 29297
03022
MAT- d 630 A 1 No 31882
03023
SANDWICH BUSDUCT
72 ELEC- Supply, installation, testing and commissioning of .......Amp, ............KA
2.9.9 breaking capacity (100% Neutral busbar) sandwich busduct system
made of CRCA sheet/Hot Galvanized steel encloser of thickness not less
than 1.5mm having degree of protection of IP 55/IP 65 as per IEC/EN
61439-6, PVC/Plastic insulated reinforced with glass fibre four strip
ALUMINIUM busbar in convenient sections including end cover units
suitable for 415 volts 3 phase, 4 wire, 50 Hz A.C. system etc., with
necessary joints, fire barrier at each floor, provision of tapping at each
floor/every meter, continuous earthing with 2 no of aluminum strip of
suitable size (one on each side0 including GI clamping brackets, angle
iron brackets, steel fasteners, connecting to earth system as required .
Makes: As per list of recommended brands.
MAT- a 630Amp, 36/40 RM 15367
03024
MAT- b 800Amp, 42/50KA RM 17234
03025
MAT- c 1000Amp, 50KA RM 18957
03026
MAT- d 1250 Amp,75kA RM 19819
03027

Page 42 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- e 1600 Amp,80 kA RM 24845
03028
MAT- f 2000 Amp ,80kA RM 30446
03029
MAT- g 2500 Amp ,150 kA RM 43659
03030
MAT- h 3200 Amp,160kA RM 50553
03031
MAT- i 4000 Amp,160kA RM 67642
03032
73 ELEC- Supply and fixing of ……. Amps Horizontal / Vertical bends for sandwich
2.9.10 Bus Duct.
Makes: As per list of recommended brands.
MAT- a 630A 1 No 15654
03033
MAT- b 800A 1 No 16947
03034
MAT- c 1000A 1 No 17665
03035
MAT- d 1250 A 1 No 19102
03036
MAT- e 1600 A 1 No 21830
03037
MAT- f 2000 A 1 No 25420
03038
MAT- g 2500 A 1 No 32027
03039
MAT- h 3200 A 1 No 38920
03040
MAT- i 4000 A 1 No 43659
03041
74 ELEC- Supply and fixing of ……. Amps Copper Flexibles for three phases and
2.9.11 neutral for Air Insulated / sandwich Busduct.
Makes: As per list of recommended brands.
MAT- a 400A 1 No 33463
03042

Page 43 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b 630A 1 No 35473
03043
MAT- c 800A 1 No 38633
03044
MAT- d 1000A 1 No 40643
03045
MAT- e 1250 A 1 No 43085
03046
MAT- f 1600 A 1 No 46388
03047
MAT- g 2000 A 1 No 50553
03048
MAT- h 2500 A 1 No 57446
03049
MAT- i 3200 A 1 No 61467
03050
MAT- j 4000 A 1 No 65632
03051
75 ELEC- Supply and fixing of Flange end for ………. Amps for Air insulated Bus
2.9.12 ducts.
Makes: As per list of recommended brands.
MAT- a 400A 1 No 12925
03052
MAT- b 630A 1 No 17665
03053
MAT- c 800A 1 No 21830
03054
76 ELEC- Supply and fixing of Flange end for ………. Amps for sandwich bus ducts
2.9.13 Makes: As per list of recommended brands.
MAT- a 400A 1 No 15654
03055
MAT- b 630A 1 No 22405
03056
MAT- c 800A 1 No 25994
03057
MAT- d 1000 A 1 No 27431
Page 44 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03058
MAT- e 1250 A 1 No 29957
03059
MAT- f 1600 A 1 No 31399
03060
MAT- g 2000 A 1 No 33319
03061
MAT- h 2500 A 1 No 56441
03062

MAT- i 3200 A 1 No 61755

03063
MAT- j 4000 A 1 No 64914
03064
77 ELEC- Supply and fixing of …...Amps Tap off box for Sandwich Busduct.
2.9.14 Makes: As per list of recommended brands.

MAT- a 160A 1 No 21542

03065
MAT- b 250A 1 No 36191
03066
MAT- c 400A 1 No 45813
03067
MAT- d 630A 1 No 66493
03068
MAT- e 800A 1 No 99813
03069

2.10 MCBs (AS PER IS:60898-1:2002)

78 ELEC- Supply of …... 10KA C/D Curve ISI Mark.
2.10.1 Makes: As per list of recommended brands as category I
MAT- a 6-32A, SP MCB 1 No 228
03070
MAT- b 40-63A, SP MCB 1 No 481
03071

Page 45 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 6-32A, DP MCB 1 No 692
03072
MAT- d 40-63A, DP MCB 1 No 1100
03073
MAT- e 6-32A, TP MCB 1 No 1100
03074
MAT- f 40-63A, TP MCB 1 No 1767
03075
MAT- g 6-32A, FP MCB 1 No 1514
03076
MAT- h 40-63A, FP MCB 1 No 2206
03077
79 ELEC- Supply of ……... 10KA C/D Curve ISI Mark.
2.10.2 Makes: As per list of recommended brands as category II
MAT- a 6-32A, SP MCB 1 No 192
03078
MAT- b 40-63A, SP MCB 1 No 415
03079
MAT- c 6-32A, DP MCB 1 No 583
03080
MAT- d 40-63A, DP MCB 1 No 842
03081
MAT- e 6-32A, TP MCB 1 No 908
03082
MAT- f 40-63A, TP MCB 1 No 1370
03083
MAT- g 6-32A, FP MCB 1 No 1238
03084
MAT- h 40-63A, FP MCB 1 No 1719
03085
80 ELEC- Supply of 6-32A 10KA SP MCB, C/D Curve ISI Mark.
2.10.3 Makes: As per list of recommended brands as category III
MAT- a 6-32A, SP MCB 1 No 156
03086
MAT- b 40-63A, SP MCB 1 No 264
03087
Page 46 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 6-32A, DP MCB 1 No 409
03088
MAT- d 40-63A, DP MCB 1 No 601
03089
MAT- e 6-32A, TP MCB 1 No 733
03090
MAT- f 40-63A, TP MCB 1 No 1142
03091
MAT- g 6-32A, FP MCB 1 No 961
03092
MAT- h 40-63A, FP MCB 1 No 1226
03093
2.11 ISOLATORS CONFIRMS TO I E C 60947 PART-III
81 ELEC- Supply of ……... Isolator.
2.11.1 Makes: As per list of recommended brands as category I.
MAT- a 32A, DP 1 No 391
03094
MAT- b 40A, DP 1 No 432
03095
MAT- c 63A, DP 1 No 571
03096
MAT- d 40A, TP 1 No 733
03097
MAT- e 63A, TP 1 No 865
03098
MAT- f 40A, FP 1 No 961
03099
MAT- g 63A, FP 1 No 1082
03100
MAT- h 100A, FP 1 No 1142
03101
82 ELEC- Supply of ……. Isolator.
2.11.2 Makes: As per list of recommended brands as category II
MAT- a 32A, DP 1 No 379
03102

Page 47 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b 40A, DP 1 No 396
03103
MAT- c 63A, DP 1 No 481
03104
MAT- d 40A, TP 1 No 685
03105
MAT- e 63A, TP 1 No 697
03106
MAT- f 40A, FP 1 No 793
03107
MAT- g 63A, FP 1 No 853
03108
MAT- h 100A, FP 1 No 1052
03109
83 ELEC- Supply of……. Isolator.
2.11.3 Makes: As per list of recommended brands as category III
MAT- a 32A, DP 1 No 253
03110
MAT- b 40A, DP 1 No 300
03111
MAT- c 63A, DP 1 No 409
03112
MAT- d 40A, TP 1 No 439
03113
MAT- e 63A, TP 1 No 504
03114
MAT- f 40A, FP 1 No 679
03115
2.12 RCCBs (ELCB/RCD) CONFIRMS TO
IEC:61008 AND IS:12640-1
84 ELEC- Supply of ………. RCCB for earth leakage protection.
2.12.1 Makes: As per list of recommended brands as category I.
MAT- a 40A, 2 Pole,30mA 1 No 3209
03116
MAT- b 40A, 2 Pole,100mA 1 No 3401
03117
Page 48 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 40A, 4 Pole30mA 1 No 3533
03118
MAT- d 40A, 4 Pole ,100mA 1 No 3665
03119
MAT- e 63A, 2 Pole,30mA, 1 No 3966
03120
MAT- f 63A, 2 Pole,100mA 1 No 3905
03121
MAT- g 63A, 4 Pole,30mA 1 No 4086
03122
MAT- h 63A, 4 Pole,100mA 1 No 4543
03123
85 ELEC- Supply of ………. RCCB for earth leakage protection.
2.12.2 Makes: As per list of recommended brands as category II

MAT- a 40A, 2 Pole,30mA 1 No 2704

03124
MAT- b 40A, 2 Pole,100mA 1 No 2765
03125
MAT- c 40A, 4 Pole30mA 1 No 3005
03126
MAT- d 40A, 4 Pole ,100mA 1 No 3125
03127
MAT- e 63A, 2 Pole,30mA, 1 No 3377
03128

MAT- f 63A, 2 Pole,100mA 1 No 3461

03129
MAT- g 63A, 4 Pole,30mA 1 No 3593
03130
MAT- h 63A, 4 Pole,100mA 1 No 3605
03131
RCBO CONFIRMS TO IEC:61009-1

86 ELEC- Supply of ……………………RCBO for overload, short-circuit and earth

2.12.3 leakage protection.

Page 49 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Makes: As per list of recommended brands.

MAT- a 40A, 2 Pole, 30mA 1 No 5468

03132
MAT- b 40A, 2 Pole,100mA 1 No 5973
03133
MAT- c 40A, 4 Pole, 30mA 1 No 6213
03134
MAT- d 40A, 4 Pole,100mA 1 No 6574
03135
MAT- e 63A, 2 Pole,30mA, 1 No 6538
03136
MAT- f 63A, 2 Pole,100mA 1 No 6922
03137
MAT- g 63A, 4 Pole,30mA 1 No 7331
03138
MAT- h 63A, 4 Pole,100mA 1 No 7475
03139
MAT- i Supply of MCB type Changeover Switch 20A, 2163
08761 Double Pole, 2 Way 400V AC suitable to fix on Din
Channel
2.13 MCB DISTRIBUTION BOARDS
(AS PER IS 8623; IS 13032; IEC 61439-3)
SPN DBs
87 ELEC- Supply of …………. Protection suitable for …………. S.P outgoings and
2.13.1 for 1 No incomer etc., complete as per IS 8623; IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category I.
MAT- a 4 Way SPN DB with IP 30, DP Incomer-1 No, SP 1 No 1105
03140 MCBs - 2 Nos
MAT- b 8 Way SPN DB with IP 30, DP Incomer-1 No, SP 1 No 1199
03141 MCBs - 6 Nos
MAT- c 12 Way SPN DB with IP 30, DP Incomer-1 No, SP 1 No 1451
03142 MCBs -10 Nos
MAT- d 4 Way SPN DB with IP 43, DP Incomer-1 No, SP 1 No 1514
03143 MCBs - 2 Nos
MAT- e 8 Way SPN DB with IP 43, DP Incomer-1 No, SP 1 No 1641
Page 50 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03144 MCBs - 6 Nos
MAT- f 12 Way SPN DB with IP 43, DP Incomer-1 No, SP 1 No 1988
03145 MCBs -10 Nos
88 ELEC- Supply of …………. Protection suitable for …………. S.P outgoings and
2.13.2 for 1 No incomer etc., complete as per IS 8623; IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category II.
MAT- a 4 Way SPN DB with IP 30, DP Incomer-1 No, SP 1 No 947
03146 MCBs - 2 Nos
MAT- b 8 Way SPN DB with IP 30, DP Incomer-1 No, SP 1 No 1009
03147 MCBs - 6 Nos
MAT- c 12 Way SPN DB with IP 30, DP Incomer-1 No, SP 1 No 1262
03148 MCBs -10 Nos
MAT- d 4 Way SPN DB with IP 43, DP Incomer-1 No, SP 1 No 1325
03149 MCBs - 2 Nos
MAT- e 8 Way SPN DB with IP 43, DP Incomer-1 No, SP 1 No 1451
03150 MCBs - 6 Nos
MAT- f 12 Way SPN DB with IP 43, DP Incomer-1 No, SP 1 No 1704
03151 MCBs -10 Nos
89 ELEC- Supply of …………. Protection suitable for …………. S.P outgoings and
2.13.3 for 1 No incomer etc., complete as per IS 8623; IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category III.
MAT- a 4 Way SPN DB with IP 30, DP Incomer-1 No, SP 1 No 820
03152 MCBs - 2 Nos
MAT- b 8 Way SPN DB with IP 30, DP Incomer-1 No, SP 1 No 884
03153 MCBs - 6 Nos
MAT- c 12 Way SPN DB with IP 30, DP Incomer-1 No, SP 1 No 1105
03154 MCBs -10 Nos
MAT- d 4 Way SPN DB with IP 43, DP Incomer-1 No, SP 1 No 1187
03155 MCBs - 2 Nos
MAT- e 8 Way SPN DB with IP 43, DP Incomer-1 No, SP 1 No 1262
03156 MCBs - 6 Nos
MAT- f 12 Way SPN DB with IP 43, DP Incomer-1 No, SP 1 No 1514
03157 MCBs -10 Nos
TPN DBs

Page 51 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
90 ELEC- Supply of ………………... protection suitable for installation of ………of
2.13.4 SP outgoing MCBs and for 1 No 4 pole, MCB/Isolator incomer along with
provision for 1 No of 4 Pole RCCB/ELCB etc., complete as per IS 8623;
IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category I.
MAT- a (8 +12) 4 Way TPN DB Horizontal with IP 30, 12 Nos 1 No 2145
03158
MAT- b (8 +18) 6 Way TPN DB Horizontal with IP 30, 18 Nos 1 No 3028
03159
MAT- c (8 +12) 4 Way TPN DB Horizontal with IP 43, 12 Nos 1 No 3407
03160
MAT- d (8 +18) 6 Way TPN DB Horizontal with IP 43, 18 Nos 1 No 4795
03161
MAT- e (8 +24) 8 Way TPN DB Horizontal with IP 43, 24 Nos 1 No 5426
03162
91 ELEC- Supply of ………………... protection suitable for installation of ………of
2.13.5 SP outgoing MCBs and for 1 No 4 pole, MCB/Isolator incomer along with
provision for 1 No of 4 Pole RCCB/ELCB etc., complete as per IS 8623;
IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category II.
MAT- a (8 +12) 4 Way TPN DB Horizontal with IP 30, 12 Nos 1 No 1956
03163
MAT- b (8 +18) 6 Way TPN DB Horizontal with IP 30, 18 Nos 1 No 2713
03164
MAT- c (8 +12) 4 Way TPN DB Horizontal with IP 43, 12 Nos 1 No 3028
03165
MAT- d (8 +18) 6 Way TPN DB Horizontal with IP 43, 18 Nos 1 No 4164
03166
MAT- e (8 +24) 8 Way TPN DB Horizontal with IP 43, 24 Nos 1 No 4795
03167
92 ELEC- Supply of ………………... protection suitable for installation of ………of
2.13.6 SP outgoing MCBs and for 1 No 4 pole, MCB/Isolator incomer along with
provision for 1 No of 4 Pole RCCB/ELCB etc., complete as per IS 8623;
IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category III.
MAT- a (8 +12) 4 Way TPN DB Horizontal with IP 30, 12 Nos 1 No 1766
03168

Page 52 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b (8 +18) 6 Way TPN DB Horizontal with IP 30, 18 Nos 1 No 2398
03169
MAT- c (8 +12) 4 Way TPN DB Horizontal with IP 43, 12 Nos 1 No 2334
03170
MAT- d (8 +18) 6 Way TPN DB Horizontal with IP 43, 18 Nos 1 No 3028
03171
MAT- e (8 +24) 8 Way TPN DB Horizontal with IP 43, 24 Nos 1 No 3533
03172
VTPN DBs
93 ELEC- Supply of ………... Protection suitable for TP/SP out going MCBs and for
2.13.7 1 No of 4 pole MCB/Isolator incomer etc., complete as per IS 8623; IS
13032; IEC 61439-3.
Makes: As per list of recommended brands as category I .

MAT- a 4 Way, VTPN DB with IP 43 1 No 8744

03173
MAT- b 6 Way, VTPN DB with IP 43 1 No 10133
03174
MAT- c 8 Way, VTPN DB with IP 43 1 No 11242
03175
94 ELEC- Supply of 7 Segment ………………with IP 42 Protection with provision for
2.13.8 FPMCB / Isolator / RCCB / RCBO as incomer, 3Nos DPMCB / Isolator /
RCCB / RCBO as sub incomer and ………. Nos SPMCB's as outgoing
MCBs as per IS 8623; IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category I
MAT- a 4 Way TPN DB, 12 Nos 1 No 9023
03176
MAT- b 8 Way TPN DB, 24 Nos 1 No 10285
03177
95 ELEC- Supply of ……. suitable for accommodating 125A / 160A 4 Pole MCCB
2.13.9 as incomer and TP/SP MCBs as outgoings etc., as per IS 8623; IS
13032; IEC 61439-3.
Makes: As per list of recommended brands as category I.
MAT- a 4 Way VTPN MCCB DB with IP 43 Protection. 1 No 11382
03178
b 6 Way VTPN MCCB DB with IP 43 Protection. 1 No 12838

Page 53 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 8 Way VTPN MCCB DB with IP 43 Protection. 1 No 14296
03179
96 ELEC- Supply of ………... Protection suitable for TP/SP out going MCBs and for
2.13.10 1 No of 4 pole MCB/Isolator incomer etc., complete as per IS 8623; IS
13032; IEC 61439-3.
Makes: As per list of recommended brands as category II
MAT- a 4 Way VTPN DB with IP 43 1 No 7698
03180
MAT- b 6 Way VTPN DB with IP 43 1 No 8203
03181
MAT- c 8 Way VTPN DB with IP 43 1 No 9590
03182
97 ELEC- Supply of 7 Segment ………………with IP 42 Protection with provision for
2.13.11 FPMCB / Isolator / RCCB / RCBO as incomer, 3Nos DPMCB / Isolator /
RCCB / RCBO as sub incomer and ………. Nos SPMCB's as outgoing
MCBs as per IS 8623; IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category II
MAT- a 4 Way TPN DB,12 Nos 1 No 8076
03183
MAT- b 8 Way TPN DB,24 Nos 1 No 9212
03184
98 ELEC- Supply of ……. suitable for accommodating 125A / 160A 4 Pole MCCB
2.13.12 as incomer and TP/SP MCBs as outgoings etc., as per IS 8623; IS
13032; IEC 61439-3.
Makes: As per list of recommended brands as category II
MAT- a 4 Way VTPN MCCB DB with IP 43 Protection. 1 No 9212
03185
b 6 Way VTPN MCCB DB with IP 43 Protection. 1 No 10411
MAT- c 8 Way VTPN MCCB DB with IP 43 Protection. 1 No 11609
03186
99 ELEC- Supply of ………. Metallic Plug and Socket with provision for 1 No of
2.13.13 SP/TP MCB for control in SS enclosure as per IS 8623; IS 13032; IEC
61439-3
Makes: As per list of recommended brands as category I.
MAT- a 20A SP 1 No 1244
03187
MAT- b 20A TP 1 No 2354

Page 54 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03188
MAT- c 32A TP 1 No 2776
03189
100 ELEC- Supply of ………. Metallic Plug and Socket with provision for 1 No of
2.13.14 SP/TP MCB for control in SS enclosure as per IS 8623; IS 13032; IEC
61439-3
Makes: As per list of recommended brands as category II.
MAT- a 20A SP 1 No 884
03190
MAT- b 20A TP 1 No 1577
03191
MAT- c 32A TP 1 No 2082
03192
101 ELEC- Supply of ………. Metallic Plug and Socket with provision for 1 No of
2.13.15 SP/TP MCB for control in SS enclosure as per IS 8623; IS 13032; IEC
61439-3
Makes: As per list of recommended brands as category III.
MAT- a 20A SP 1 No 664
03193
MAT- b 20A TP 1 No 1262
03194
MAT- c 32A TP 1 No 1766
03195
102 ELEC- Supply of …. 1-way Sheet Steel enclosure with IP 20 Protection etc.,
2.13.16 complete as per IS 8623; IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category I.
MAT- a SP 1 No 379
03196
MAT- b DP/TP/FP 1 No 505
03197
103 ELEC- Supply of …. 1-way Sheet Steel enclosure with IP 20 Protection etc.,
2.13.17 complete as per IS 8623; IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category II.
MAT- a SP 1 No 290
03198
MAT- b DP/TP/FP 1 No 416
03199
Page 55 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
104 ELEC- Supply of …. 1-way Sheet Steel enclosure with IP 20 Protection etc.,
2.13.18 complete as per IS 8623; IS 13032; IEC 61439-3.
Makes: As per list of recommended brands as category III.
MAT- a SP 1 No 266
03200
MAT- b DP/TP/FP 1 No 391
03201
2.14 Over voltage& Low voltage release

105 ELEC- Supply of Over voltage + Low Voltage release, 230V 1 No 3017
2.14.1 AC, 60V AC< U <170V AC, U> 267V AC, 1 module.
Makes: As per list of recommended brands
ELEC- Supply of Over voltage, 230V AC, U >275V AC, 3 1 No 4390
2.14.2 phase in 1 module suitable for 3Ph+N.
Makes: As per list of recommended brands
2.15 BUSBAR CHAMBERS(TPN)
106 ELEC- Supply and fixing of ……..4 Way Busbar chamber
2.15.1 made of ETP Copper.
Makes: As per list of recommended brands
a 63A 1 No 7632
b 100A 1 No 8455
c 200A 1 No 10459
SECTION - 3
3.1 STREET LIGHT LUMINAIRES
MAT- ELEC- deleted 1 No
03202 3.1.1

MAT- ELEC- deleted 1 No

03203 3.1.2

MAT- ELEC- Deleted 1 No

03204 3.1.3 a
MAT- ELEC- Deleted 1 No
03205 3.1.3 b
MAT- ELEC- Deleted 1 No
Page 56 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03206 3.1.3 c
MAT- ELEC- Deleted 1 No
03207 3.1.4a
MAT- ELEC- Deleted 1 No
03208 3.1.4 b
MAT- ELEC- Deleted 1 No
03209 3.1.4 c
MAT- ELEC- Deleted 1 No
03210 3.1.5 a
MAT- ELEC- Deleted 1 No
03212 3.1.6 a
MAT- ELEC- Deleted 1 No
03214 3.1.7 a
MAT- ELEC- Deleted 1 No
03215 3.1.7 b
3.2 LED POST TOP LANTERN LUMINAIRES
107 MAT- ELEC- Supply and Transportation of 40W LED Post top 1 No 7820
03218 3.2.1 lantern made with cast Aluminum with decorative
opal polycarbonate diffuser with IP 65 protection
etc., complete with all accessories with not less than
two years warranty.
Makes: As per list of recommended brands.
108 MAT- ELEC- Supply and Transportation of 25 W Post Top lantern 1 No 17480
03219 3.2.2 made with high Pressure die cast aluminum body
with polycarbonate / high impact Poly carbonate
protector for optimal luminous flux, IP66 suitable for
vertical mounting of 76 mm dia, the luminaire shall
have CCT 3000-4000K with internal surge protection
of 4KV and External Surge Protection of 10 KV, p.f.
>0.95 etc., with not less than two years warranty.
Makes: As per list of recommended brands.

Page 57 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
109 MAT- ELEC- Supply and Transportation of 35/40 W Post Top 1 No 21620
03220 3.2.3 lantern made with high Pressure die cast aluminum
body with polycarbonate / high impact PMMA
protector for optimal luminous flux, IP66 suitable for
vertical mounting of 76 mm dia. the luminaire shall
have CCT 3000-4000K with internal surge protection
of 4KV and External Surge Protection of 10 KV,
p.f>0.95 etc., complete with not less than two years
warranty.
Makes: As per list of recommended brands.
110 MAT- ELEC- Supply and Transportation of 20 W LED Post top 1 No 4200
08762 3.2.4 lantern made with cast Aluminum with decorative
opal polycarbonate diffuser with IP 65 protection
etc., complete with all accessories with not less than
two years warranty.
Makes: As per list of recommended brands.
3.3 ACCESSORIES FOR MV / SV / MH LUMINAIRES
COPPER BALLASTS
MAT- ELEC- Deleted 1 No
03221 3.3.1 a
MAT- ELEC- Deleted 1 No
03222 3.3.1 b
MAT- ELEC- Deleted 1 No
03223 3.3.1 c
MAT- ELEC- Deleted 1 No
03224 3.3.1 d
MAT- ELEC- Deleted 1 No
03225 3.3.2 a
MAT- ELEC- Deleted 1 No
03226 3.3.2 b
MAT- ELEC- Deleted 1 No
03227 3.3.2 c
MAT- ELEC- Deleted 1 No
03228 3.3.2 d
IGNITOR
MAT- ELEC- Deleted 1 No
03229 3.3.3

Page 58 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5

HPF CAPACITORS
MAT- ELEC- Deleted 1 No
03230 3.3.4 a
MAT- ELEC- Deleted 1 No
03231 3.3.4 b
MAT- ELEC- Deleted 1 No
03232 3.3.4 c
MAT- ELEC- Deleted 1 No
03233 3.3.4 d
MAT- ELEC- Deleted 1 No
03234 3.3.4 e
MAT- ELEC- Deleted 1 No
03235 3.3.4 f
3.4 LAMPS
MAT- ELEC- Deleted 1 No
03236 3.4.1 a
MAT- ELEC- Deleted 1 No
03237 3.4.1 b
MAT- ELEC- Deleted 1 No
03238 3.4.1 c
MAT- ELEC- Deleted 1 No
03239 3.4.1 d
MAT- ELEC- Deleted 1 No
03240 3.4.1 e
MAT- ELEC- Deleted 1 No
03241 3.4.1 f
MAT- ELEC- Deleted 1 No
03242 3.4.1 g
MAT- ELEC- Deleted 1 No
03243 3.4.1 h
MAT- ELEC- Deleted 1 No
03244 3.4.1 i
MAT- ELEC- Deleted 1 No

Page 59 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03245 3.4.2 a
MAT- ELEC- Deleted 1 No
03246 3.4.2 b
MAT- ELEC- Deleted 1 No
03247 3.4.2 c
MAT- ELEC- Deleted 1 No
03248 3.4.2 d
MAT- ELEC- Deleted 1 No
03249 3.4.2 e
MAT- ELEC- Deleted 1 No
03250 3.4.2 f
MAT- ELEC- Deleted 1 No
03251 3.4.2 g
MAT- ELEC- Deleted 1 No
03252 3.4.2 h
MAT- ELEC- Deleted 1 No
03253 3.4.2 i
3.5 AUTOMATIC STREET LIGHT CONTROL
SYSTEMS
111 ELEC- Supply of Automatic Street Light Control System with Optical Micro
3.5.1 Sensor, Low voltage / High voltage trip and reset, operating voltage 150 -
280V AC, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs
and contactor suitable to control the load of ...... of single-phase load with
necessary clamping arrangements.
Makes: As per list of recommended brands.
MAT- a 1 KW 1 No 9900
03254
MAT- b 3 KW 1 No 12430
03255
MAT- c 5 KW 1 No 12980
03256
MAT- d 8 KW 1 No 14850
03257

Page 60 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
112 ELEC- Supply of Automatic Street Light Control System with Optical Micro
3.5.2 Sensor, Low voltage / High voltage trip and reset, operating voltage 150 -
280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54
protection, MCBs and contactor suitable to control the load of ....... of
Three phase load with necessary clamping arrangements.
Makes: As per list of recommended brands.
MAT- a 5 KW 1 No 16280
03258
MAT- b 8 KW 1 No 16830
03259
MAT- c 12 KW 1 No 20350
03260
MAT- d 25KW 1 No 32340
03261
MAT- e 50KW 1 No 46200
03262
113 ELEC- Supply and fixing of Automatic Street Light Controller with
3.5.3 optical micro scanner low voltage/ High Voltage trip and
reset operating voltage 150 - 280V AC, withstands up to
440V, 50 HZ with suitable ABS enclosure of IP 54 protection,
suitable to control the load of 10A of single phase with
necessary arrangements etc complete.
Makes: As per list of recommended brands.
MAT- a SLASM-01-10A /equivalent (Dusk to Dawn) 1 No 3500
08763
MAT- b SLASM-02-10A /equivalent (Time setting after 4hr) 1 No 4500
08764
MAT- c SLASM-03-10A /equivalent (Time setting 4hr,6Hr, 1 No 4200
08765 8Hr)
3.6 INTERNAL LUMINAIRES
MAT- ELEC- Deleted 1 No
03263 3.6.1 a
MAT- ELEC- Deleted 1 No
03264 3.6.1 b
MAT- ELEC- Deleted 1 No
03265 3.6.2 a
MAT- ELEC- Deleted 1 No

Page 61 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03266 3.6.2 b
MAT- ELEC- Deleted 1 No
03267 3.6.3

ACCESSORIES
MAT- ELEC- Deleted 1 No
03268 3.6.4
MAT- ELEC- Deleted 1 No
03269 3.6.5
MAT- ELEC- Deleted 1 No
03270 3.6.6
MAT- ELEC- Deleted 1 No
03271 3.6.7
MAT- ELEC- Deleted 1 No
03272 3.6.8

MAT- ELEC- Deleted 1 No

03273 3.6.9

MAT- ELEC- Deleted 1 No

03274 3.6.10
MAT- ELEC- Deleted 1 No
03275 3.6.11
3.7 FLOURSCENT TUBES / CFL LAMPS / LED
BULBS
MAT- ELEC- Deleted 1 No
03276 3.7.1
MAT- ELEC- Deleted 1 No
03277 3.7.2
MAT- ELEC- Deleted 1 No
03278 3.7.3
114 ELEC- Supply of …. Pin type CFL Lamp.
3.7.4 Makes: As per list of recommended brands.
MAT- a 9W 1 No 66
03279
MAT- b 11W 1 No 77
Page 62 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03280
MAT- c 13W 1 No 99
03281
MAT- d 18W 1 No 105
03282
MAT- e 36W 1 No 138
03283
LED BULBS
115 ELEC- Supply of ………. Lamp with input voltage 90 to 300V, Color temperature
3.7.5 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base.
Makes: As per list of recommended brands.

MAT- a 0.5W LED 1 No 46

03284
MAT- b 3.0W LED 1 No 101
03285
MAT- c 5.0W LED 1 No 110
03286
MAT- d (7 to 9)W LED 1 No 129
03287
116 MAT- ELEC- Supply of 3W to 5W 3000K, AC 160-260V, LED 1 No 184
03292 3.7.6 Candle Lamp for chandeliers.
Makes: As per list of recommended brands.
117 MAT- ELEC- Supply of 9W/10W LED Mirror Light fitting with 1 No 550
08797 3.7.7 decorative grey end caps, polycarbonate body and
opal acrylic diffuser etc.
Makes: As per list of recommended brands.
3.8 LED LUMINAIRES INDOOR
DOWN LIGHTERS
118 ELEC- Supply and fixing of........ heavy duty LED Down lighter, suitable for
3.8.1 Recessed mounting made of pressure diecast aluminum body with
powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec
13) : 2012 , operating voltage of 150 to 265 Volts AC, P.F > 0.9, Surge
protection: 2KV, THD<10% with high power LEDs, having System
Efficacy of >= 100 lumens / watt, CCT: 3000K - 5700K, minimum CRI >
70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc.,
complete with earth connection and not less than two years warranty.
Page 63 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Makes: As per list of recommended brands as category I.

MAT- a 6W 1 No 642
03294
MAT- b 9W 1 No 813
03295
MAT- c 12W 1 No 1176
03296
MAT- d 15W 1 No 1262
03297
MAT- e 18W 1 No 1348
03298
119 ELEC- Supply and fixing of ........ heavy duty LED Down lighter, suitable for
3.8.2 Recessed / Surface mounting made of pressure diecast aluminum body
with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/
Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F >
0.9, Surge protection: 2KV, THD<10% with high power LEDs, having
System Efficacy of > =90 lumens / watt, CCT: 3000K - 5700K, minimum
CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3)
etc., complete with earth connection and not less than two years
warranty. Makes: As per list of
recommended brands as category II.
MAT- a 6W 1 No 599
03299
MAT- b 9W 1 No 762
03300
MAT- c 12W 1 No 1104
03301
MAT- d 15W 1 No 1185
03302
MAT- e 18W 1 No 1267
03303

Page 64 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
120 ELEC- Supply and fixing of........ heavy duty LED Down lighter, suitable for
3.8.3 Recessed / Surface mounting made of pressure diecast aluminum body
with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/
Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F >
0.9, Surge protection: 2KV, THD<10% with high power LEDs, having
System Efficacy of >=80 lumens / watt, CCT: 3000K - 5700K, minimum
CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3)
etc., complete with earth connection and not less than two years
warranty. Makes: As per list of
recommended brands as category III.

MAT- a 6W 1 No 522
03304
MAT- b 9W 1 No 671
03305
MAT- c 12W 1 No 950
03306
MAT- d 15W 1 No 1022
03307
MAT- e 18W 1 No 1099
03308
LED PANEL LIGHTS
121 ELEC- Supply and fixing of........ LED Slim Panel Round /Square suitable for
3.8.4 Recessed / Surface mounting made of diecast aluminum body with
powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec
13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9,
Surge protection: 2KV, THD<10%, with high power LEDs, having
System Efficacy of >=100 lumens /watt, CCT: 3000K - 5700K, minimum
CRI>70, .etc., complete with earth connection and not less than two
years warranty. Makes: As per list of
recommended brands as category I.
MAT- a 3W 1 No 265
03309
MAT- b 6W 1 No 458
03310
MAT- c 12W 1 No 761
03311
MAT- d 15W 1 No 961
03312
Page 65 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- e 18W 1 No 1053
03313
MAT- f 24W 1 No 1328
03314
MAT- g 36W/40W (600mm x 600mm) square type 1 No 3250
03315
h 30W/36W (1200mm x 300mm) rectangle type 1 No 3383
122 ELEC- Supply and fixing of........ LED Slim Panel Round /Square suitable for
3.8.5 Recessed / Surface mounting made of diecast aluminum body with
powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec
13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9,
Surge protection: 2KV, THD<10%, with high power LEDs, having
System Efficacy of >=90 lumens /watt, CCT: 3000K - 5700K, minimum
CRI>70, .etc., complete with earth connection and not less than two
years warranty.
Makes: As per list of recommended brands as category II.
MAT- a 3W 1 No 257
03316
MAT- b 6W 1 No 448
03317
MAT- c 12W 1 No 732
03318
MAT- d 15W 1 No 938
03319
MAT- e 18W 1 No 1007
03320
MAT- f 24W 1 No 1236
03321
MAT- g 36W/40W (600mm x 600mm) square type 1 No 3159
03322
h 30W/36W (1200mm x 300mm) rectangle type 1 No 3292
123 ELEC- Supply and fixing of........ LED Slim Panel Round /Square suitable for
3.8.6 Recessed / Surface mounting made of diecast aluminum body with
powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec
13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9,
Surge protection: 2KV, THD<10%, with high power LEDs, having
System Efficacy of >=80 lumens /watt, CCT: 3000K - 5700K, minimum
CRI>70, .etc., complete with earth connection and not less than two
Page 66 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
years warranty.
Makes: As per list of recommended brands as category III.

MAT- a 3W 1 No 243
03323
MAT- b 6W 1 No 421
03324
MAT- c 12W 1 No 687
03325
MAT- d 15W 1 No 916
03326
MAT- e 18W 1 No 947
03327

MAT- f 24W 1 No 1190

03328
COB DOWN LIGHTS
124 ELEC- Supply and fixing of........ LED COB Down lighter, suitable for Recessed
3.8.7 mounting made of pressure diecast aluminum housing with powder
coating, with high efficiency reflector , operating voltage range of 150 to
265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high
power LEDs, having System Efficacy of > =100 lumens/watt, CCT: 3000K
- 5700K, minimum CRI>70, .etc., complete with earth connection and not
less than two years warranty.
Makes: As per list of recommended brands as category I.
MAT- a 9 / 10 W 1 No 1155
03329
MAT- b 15 / 16 W 1 No 1497
03330
MAT- c 18 / 20 W 1 No 1668
03331
MAT- d 30 W 1 No 2652
03332
MAT- f 45 W 1 No 2909

Page 67 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03333
125 ELEC- Supply and fixing of ........ LED COB Down lighter, suitable for Recessed
3.8.8 mounting made of pressure diecast aluminum housing with powder
coating, with high efficiency reflector , operating voltage range of 150 to
265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high
power LEDs, having System Efficacy of >=90 lumens / watt, CCT: 3000K
- 5700K, minimum CRI>70, etc., complete with earth connection and not
less than two years warranty.
Makes: As per list of recommended brands as category II.
MAT- a 9 / 10 W 1 No 1112
03334
MAT- b 15/ 16W 1 No 1412
03335
MAT- c 18 / 20W 1 No 1583
03336
MAT- d 30W 1 No 2567
03337
SPOTLIGHTS / WALL WASHERS
126 ELEC- Supply and Transportation of ........ LED COB Spotlight suitable for
3.8.9 Recessed mounting made of diecast aluminum body with powder
coating, high efficiency reflector, with driver, operating voltage range of
150 to 265 Volts AC, P.F > 0.9, surge protection: 2KV, THD<10% with
high power LEDs, having System Efficacy of > =100 lumens/watt, CCT:
3000K - 5700K, minimum CRI>70, etc., complete with earth connection
and not less than two years warranty.
Makes: As per list of recommended brands as category I.
MAT- a 2/3 W 1 No 385
03338
MAT- b 5/6 W 1 No 471
03339
MAT- c 7W 1 No 898
03340
127 ELEC- Supply and Transportation of ........ LED COB Spotlight suitable for
3.8.10 Recessed mounting made of diecast aluminum body with powder
coating, high efficiency reflector, with driver, operating voltage range of
150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with
high power LEDs, having System Efficacy of > =90 lumens/watt, CCT:
3000K - 5700K, minimum CRI>70, etc., complete with earth connection
and not less than two years warranty.
Page 68 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Makes: As per list of recommended brands as category II.

MAT- a 2/3 W 1 No 342

03341
MAT- b 5/6 W 1 No 428
03342
MAT- c 7W 1 No 856
03343
128 ELEC- Supply and fixing of........ LED single colour Wall washer,
3.8.11 1000mm length, IP65, made of diecast aluminum body with
powder coating, with driver, operating voltage range of 150 to
265 Volts AC, with high power LEDs, having System Efficacy
of >=100 lumens/watt, CCT: 3000-4000K , beam angle 25/45
degrees, minimum CRI>70, .etc., complete with earth
connection and not less than two years warranty.
Makes: As per list of recommended brands as category I.
MAT- a 18W 1 No 3508
03344
MAT- b 24W 1 No 4107
03345
129 ELEC- Supply and fixing of........ LED single colour Wall washer, 1000mm length,
3.8.12 IP65, made of diecast aluminum body with powder coating, with driver,
operating voltage range of 150 to 265 Volts AC, with high power LEDs,
having System Efficacy of >=90 lumens/watt, CCT: 3000-4000K , beam
angle 25/45 degrees, minimum CRI>70, .etc., complete with earth
connection and not less than two years warranty.
Makes: As per list of recommended brands as category II.
MAT- a 18W 1 No 3251
03346
MAT- b 24W 1 No 3979
03347
LED BATTENs AND 2' x 2' LUMINARIES

Page 69 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
130 MAT- ELEC- Supply and fixing of 20-24W, not less than 1100mm 1 No 616
03348 3.8.13 length LED batten light with extruded aluminum
housing and polycarbonate cover, input voltage AC
220 - 260 Volts, with high power LEDs, having
System Efficacy of >=100 lumens/watt , PF>0.9,
Surge protection: 2KV, THD<15%, with inbuilt driver
and frosted cover CCT: 3000K - 5700K, minimum
CRI>70, etc., complete with earth connection and
not less than two years warranty.
Makes: As per list of recommended brands as
category I.
131 MAT- ELEC- Supply and fixing of 20-24W, not less than 1100mm 1 No 554
03349 3.8.14 length LED batten light with extruded aluminum
housing and polycarbonate cover, input voltage AC
220 - 260 Volts, with high power LEDs, having
System Efficacy of >=90 lumens/watt , PF>0.9,
Surge protection: 2KV, THD<15%, with inbuilt driver
and frosted cover CCT: 3000K - 5700K, minimum
CRI>70, etc., complete with earth connection and
not less than two years warranty.
Makes: As per list of recommended brands as
category II.
132 MAT- ELEC- Supply and fixing of 20-24W, not less than 1100mm 1 No 462
03350 3.8.15 length LED batten light with extruded aluminum
housing and polycarbonate cover, input voltage AC
220 - 260 Volts, with high power LEDs, having
System Efficacy of >=80 lumens/watt , PF>0.9,
Surge protection: 2KV, THD<15%, with inbuilt driver
and frosted cover CCT: 3000K - 5700K, minimum
CRI>70, etc., complete with earth connection and
not less than two years warranty.
Makes: As per list of recommended brands as
category III.
133 MAT- ELEC- Supply and fixing of 20W, 2400 lumens, T8 not less 1 No 547
03351 3.8.16 than 1100 mm length LED retrofit tube light with
aluminum anodized body, input voltage AC 220 -
260 Volts, having luminous efficacy >=100 lumens/
watt, with PF>0.9, surge protection: 2KV, THD<10%,
with inbuilt driver and frosted cover CCT: 3000K-
5700K, minimum CRI>70, etc., as per IS 10322 (Part
5/ Sec 1), 2012, complete with earth connection and
not less than two years warranty. Makes: As per list
of recommended brands as category I.
Page 70 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
134 MAT- ELEC- Supply and fixing of 20W, 2400 lumens, T8 not less 1 No 500
03352 3.8.17 than 1100 mm length LED retrofit tube light with
aluminum anodized body, input voltage AC 220 -
260 Volts, having luminous efficacy >=90 lumens/
watt, with PF>0.9, surge protection: 2KV, THD<10%,
with inbuilt driver and frosted cover CCT: 3000K-
5700K, minimum CRI>70, etc., as per IS 10322 (Part
5/ Sec 1), 2012, complete with earth connection and
not less than two years warranty. Makes: As per list
of recommended brands as category II.
135 MAT- ELEC- Supply of not less than 1100mm length, Box type 1 No 248
03353 3.8.18 powder coated tube light luminaire with necessary
wiring suitable for fixing 2 Nos retrofit T8 LED tubes
but without tube and choke.
Makes: As per list of recommended brands as
Category-I.
136 MAT- ELEC- Supply of not less than 1100mm length, Box type 1 No 214
03354 3.8.19 powder coated tube light luminaire with necessary
wiring suitable for fixing 1 No retrofit T8 LED tube but
without tube and choke.
Makes: As per list of recommended brands as
Category-II.
137 ELEC- Supply, transportation and fixing of ......... Recessed / Surface mounting
3.8.20 2' x 2' (600x600 mm) LED luminaire made of CRCA sheet housing with
powder coated with acrylic diffuser, constant current driver as per IS:
15885 (Part 2/ Sec 13) : 2012 , with operating voltage range of 150 to
265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high
power LEDs, having System Efficacy of >=100 lumens / watt, CCT:
3000K - 5700K, minimum CRI>70, .etc., complete with earth connection
and not less than two years warranty.
Makes: As per list of recommended brands as category I.

MAT- a 36 W 1 No 2785
03355
MAT- b 45 W 1 No 3103
03356

Page 71 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
138 ELEC- Supply, transportation and fixing of ......... Recessed / Surface mounting
3.8.21 2' x 2' (600x600 mm) LED luminaire made of CRCA sheet housing with
powder coated with acrylic diffuser, constant current driver as per IS:
15885 (Part 2/ Sec 13) : 2012 , with operating voltage range of 150 to
265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high
power LEDs, having System Efficacy of > =90 lumens / watt, CCT: 3000K
- 5700K, minimum CRI>70, .etc., complete with earth connection and not
less than two years warranty.
Makes: As per list of recommended brands as category II.

MAT- a 36 W 1 No 2625
03357
MAT- b 45 W 1 No 2944
03358
139 MAT- ELEC- Supply of 10W LED Bulkhead fitting with Pressure 1 No 941
03359 3.8.22 die cast aluminum with opal diffuser with IP 65
protection etc., complete.
Makes: As per list of recommended brands as
category I.
140 ELEC- Supply, Transportation and Fixing of ........, 1100mm length
3.8.22 Linear Profile LED Luminaire recessed/surface mounted with
Aluminum extrusion, powder coated cover, input voltage AC
90-270 volts with PF>0.95, with high power LEDs, having
system efficacy of >=100 lumens / watt, surge protection:
2KV, THD<15%, with inbuilt driver and frosted cover CCT:
3000K - 5700K, minimum CRI>70, .etc., complete including
fixing of 23W Linear light duly recessed in the ceiling/surface
mounted by hanging from ceiling with necessary mounting
arrangements, jointing kit, connecting wire leads etc., and all
accessories, giving connections and all labour charges etc.,
complete with earth connection and not less than two years
warranty.
Makes: As per list of recommended brands.
MAT- a 20/25W 1 No 3222
08766
MAT- b 40W 1 No 5524
08767
LED STREET LIGHTS

Page 72 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
141 ELEC- Supply and transportation of ......... LED Street light Luminaire made of
3.8.23 pressure diecast aluminum body with powder coated, having protective
toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high
power LEDs having System Efficacy >=120 lumens/watt and junction
temperature < 70°C, with Ingress protection IP66, Luminaire performance
complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-
house additional Surge protection 10 KV with optics distribution,
THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K,
minimum CRI>70, etc., complete with earth connection and not less
than two years warranty.
Makes: As per list of recommended brands as category I.

MAT- a 20W 1 No 1525

03360
MAT- b 30W 1 No 2387
03361
MAT- c 45W 1 No 3619
03362
MAT- d 60W 1 No 4543
03363
142 ELEC- Supply and transportation of ......... LED Street light Luminaire made of
3.8.24 pressure diecast aluminum body with powder coated, having protective
toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high
power LEDs having System Efficacy >= 120 lumens/watt and junction
temperature < 70°C, with Ingress protection IP66, Luminaire performance
complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-
house additional Surge protection 10 KV with optics distribution,
THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K,
minimum CRI>70, etc., complete with earth connection and not less
than two years warranty.
Makes: As per list of recommended brands as category I

MAT- a 90W 1 No 7085

03364
MAT- b 120W 1 No 9164
03365
MAT- c 150W 1 No 10589
03366
MAT- d 180W 1 No 11936
03367

Page 73 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- e 210W 1 No 15401
03368
143 ELEC- Supply and transportation of ......... LED Street light Luminaire made of
3.8.25 pressure diecast aluminum body with powder coated, having protective
toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high
power LEDs having System Efficacy >= 100 lumens/watt and junction
temperature < 70°C, with Ingress protection IP66, Luminaire performance
complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-
house additional Surge protection 10 KV with optics distribution,
THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K,
minimum CRI>70, etc., complete with earth connection and not less
than two years warranty.
Makes: As per list of recommended brands as category II
MAT- a 20W 1 No 1425
03369
MAT- b 30W 1 No 2219
03370
MAT- c 45W 1 No 3465
03371
MAT- d 60W 1 No 4312
03372
MAT- e 90W 1 No 6700
03373
MAT- f 120W 1 No 8086
03374
MAT- g 150W 1 No 9703
03375
MAT- h 180W 1 No 11089
03376
MAT- i 210W 1 No 13514
03377
144 ELEC- Supply and transportation of ......... LED Street light Luminaire made of
3.8.26 pressure diecast aluminum body with powder coated, having protective
toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high
power LEDs having System Efficacy >= 90 lumens/watt and junction
temperature < 70°C, with Ingress protection IP66, Luminaire performance
complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-
house additional Surge protection 10 KV with optics distribution,
THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K,
Page 74 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
minimum CRI>70, etc., complete with earth connection and not less
than two years warranty.
Makes: As per list of recommended brands as category III

MAT- a 20W 1 No 1352

03378
MAT- b 30W 1 No 1964
03379
MAT- c 45W 1 No 3235
03380
MAT- d 60W 1 No 4004
03381
MAT- e 90W 1 No 6237
03382
MAT- f 120W 1 No 7315
03383
FLOOD LIGHTS
145 ELEC- Supply and transportation of ......... LED Flood light Luminaire made of
3.8.27 pressure diecast aluminum housing with powder coated, having
protective toughened glass, supply Input voltage 120 - 270 V AC, P.F >
0.90, high power LEDs, with a System Efficacy >=120 lumens/watt and
junction temperature < 70°C, with ingress protection IP66, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), IK05, driver surge
protection 4KV, In-house additional surge protection ≥ 10KV with wide/
narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, ,
CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth
connection and not less than two years warranty.
Makes: As per list of recommended brands as category I.

MAT- a 50/60W 1 No 4505

03384
MAT- b 90/100W 1 No 7970
03385
MAT- c 120W 1 No 10326
03386
MAT- d 150W 1 No 12128
03387
MAT- e 200W 1 No 14554
Page 75 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03388
MAT- f 250W 1 No 16979
03389
MAT- g 300 W 1 No 20098
03390
MAT- h 400W 1 No 23216
03391
146 ELEC- Supply and transportation of ......... LED Flood light Luminaire made of
3.8.28 pressure diecast aluminum housing with powder coated, having
protective toughened glass, supply Input voltage 120 - 270 V AC, P.F >
0.90, high power LEDs, with a System Efficacy >=100 lumens/watt and
junction temperature < 70°C, with ingress protection IP66, Luminaire
performance complies to IS 10322 (Part 5 / Sec-3), IK05, driver surge
protection 4KV, In-house additional surge protection ≥ 10KV with wide/
narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, ,
CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth
connection and not less than two years warranty.
Makes: As per list of recommended brands as category II.

MAT- a 50/60W 1 No 4019

03392
MAT- b 90/100W 1 No 7277
03393
MAT- c 120W 1 No 9356
03394
MAT- d 150W 1 No 11089
03395
MAT- e 200W 1 No 13168
03396
HIGH BAY LIGHTS
147 ELEC- Supply and transportation of ......... LED High Bay Luminaire with high
3.8.29 power COB LED made of pressure diecast aluminum housing with
powder coated, supply input voltage 120 - 270 V AC, P.F > 0.90, high
power LEDs, having system efficacy >=120 lumens/watt and junction
temperature < 70°C, with ingress protection IP66, IK05, Driver surge
protection 4KV, in-house additional surge protection ≥ 5KV with
wide/narrow beam optics, THD<10% at 110 Volts AC, driver efficiency
>90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with
earth connection and not less than two years warranty.
Page 76 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Makes: As per list of recommended brands as category I.

MAT- a 60W 1 No 6546

03400
MAT- b 90W 1 No 8471
03401
MAT- c 120W 1 No 9626
03402
MAT- d 150W 1 No 11165
03403
148 ELEC- Supply and transportation of ......... LED High Bay Luminaire with high
3.8.30 power COB LED made of pressure diecast aluminum housing with
powder coated, supply input voltage 120 - 270 V AC, P.F > 0.90, high
power LEDs, having system efficacy >=100 lumens/watt and junction
temperature < 70°C, with ingress protection IP66, IK05, Driver surge
protection 4KV, in-house additional surge protection ≥ 5KV with
wide/narrow beam optics, THD<10% at 110 Volts AC, driver efficiency
>90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with
earth connection and not less than two years warranty.
Makes: As per list of recommended brands as category II.
MAT- a 60W 1 No 6161
03404
MAT- b 90W 1 No 7547
03405
MAT- c 120W 1 No 8855
03406
MAT- d 150W 1 No 10396
03407

Page 77 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
149 ELEC- Supply and transportation of ......... LED Linear Wall washer of size
3.8.31 .................. mm with high power LEDs, made of pressure diecast
aluminum housing with powder coated, supply Input voltage 120 - 270 V
AC, leads to 24 V DC output voltage drives with beam angle of
15/25/45/60, P.F > 0.90, having system efficacy >=120 lumens/wat and
junction temperature < 70°C, with ingress protection IP66, IK05, with
multi colour (Red or Yellow or Green or blue or White) etc., complete with
earth connection and not less than two years warranty.
Makes: As per list of recommended brands.
MAT- a 18 W, 1000 X 38 X 58 mm 1 No 8043
05492
MAT- b 24 W, 1000 X 38 X 58 mm 1 No 8470
05493
MAT- c 36 W, 1000 X 38 X 86 mm 1 No 9839
05494
MAT- d 48 W, 1000 X 60 X 100 mm 1 No 11893
05495
RGB/RGBW LED Lighting
150 ELEC- Supply and transportation of ………..IP-66, RGBW LED Flood light
3.8.32 Luminaries made of pressure die cast aluminum housing with powder
coated, having protective toughened glass, with a system efficacy of
>=120 lumens/watt, supply input voltage 120 - 270 V AC, leads to 24 V
DC output voltage drives RGB LEDs with light angle 60°, surge protection
6KV and junction temperature < 70°C, CRI>70, P.F>0.9, suitable for
RGB DMX 512 controller etc., complete with earth connection and not
less than two years warranty.
Makes: As per list of recommended brands.

MAT- a 90W 1 No 23460

05496
MAT- b 120W 1 No 26680
05497
151 ELEC- Supply and transportation of ......... RGB LED Linear Wall washer of
3.8.33 Size .................. mm with high power LEDs, made of pressure diecast
aluminum housing with powder coated, supply input voltage 120 - 270 V
AC, leads to 24 V DC output voltage drives, with beam angle of 15/25/45/
60, P.F > 0.90, having system efficacy >=100 lumens/watt and junction
temperature < 70°C, with ingress protection IP66, IK05, suitable for RGB
DMX 512 controller etc., complete with earth connection and not less
than two years warranty.
Page 78 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Makes: As per list of recommended brands.

MAT- a 18 W, 1000 X 38 X 58 mm 1 No 10304

05498
MAT- b 24 W, 1000 X 38 X 58 mm 1 No 10856
05499
MAT- c 36 W, 1000 X 38 X 58 mm 1 No 12144
05500
MAT- d 48 W, 1000 X 60 X 100 mm 1 No 15364
05501
152 MAT- ELEC- Supply, transportation and installation of stand-alone 1 No 78000
05502 3.8.34 USB -DMX controller to control a wide variety of
different DMX systems from RGB/RGBW, including
1024 DMX channels, input power 5-5.5 V DC 0.6 A
with programmability on PC, MAC, tablet, smart
phone with micro SD card etc complete
Makes: As per list of recommended brands.

153 MAT- ELEC- Supply, Transportation and Installation of DMX 1 No 16000

05503 3.8.35 splitter/booster in the existing junction box with
necessary connections.
Makes: As per list of recommended brands.
154 MAT- ELEC- Supply, Transportation and Installation of DMX-DC- 1 No 5200
05504 3.8.36 5A, decoder in the existing junction box with
necessary connections.
Makes: As per list of recommended brands.
155 MAT- ELEC- Supply, Transportation and Installation of DC 24V 1 No 3900
05505 3.8.37 input DMX Data Repeater in the existing junction box
with necessary connections.
Makes: As per list of recommended brands.
156 MAT- ELEC- Supply, Transportation and Installation of 350W, 1 No 4900
05506 3.8.38 non-waterproof, DC 24V, Constant Voltage Power
Supply (driver) unit in the existing junction box with
necessary connections. Makes: As per list of
recommended brands.

Page 79 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
157 MAT- ELEC- Supply, Transportation and Installation of 350W, 1 No 3200
05507 3.8.39 non-water proof, DC 12V,1.25 A Constant Voltage
Power Supply (driver) Unit in the existing junction
box with necessary connections.
Makes: As per list of recommended brands.

LED DRIVERS
158 ELEC- Supply and transportation of LED Driver as per IS 15885 (Part 2 / Sec
3.8.40 13)..2012 with input line voltage 120V-270V AC, 50Hz with surge
protection more than 2.5 KV, IP20, suitable for …….. LED indoor
luminaire, with 2 Years Warranty.
Makes: As per list of recommended brands.
MAT- a 6/9 W 1 No 225
03408
MAT- b 12/15/18/20 W 1 No 325
03409
MAT- c 36 W 1 No 546
03410
MAT- d 40/45 W 1 No 661
03411
159 ELEC- Supply and transportation of LED Driver as per IS 15885 (Part 2 / Sec
3.8.41 13)..2012 with input line voltage 120V-270V AC, 50Hz with surge
protection of 4.0 KV, IP20, suitable for …………. LED street light fitting
with 2 Years Warranty.
Makes: As per list of recommended brands.
MAT- a 15-30 W 1 No 350
03412
MAT- b 45-90 W 1 No 800
03413
MAT- c 120-180 W 1 No 1400
03414
SECTION - 4
4.1 U.G. CABLES
160 ELEC- Supply and transportation of following XLPE insulated, 1100V grade
4.1.1 armoured aluminum cable as per specification confirming to IS:7098 (Part
- I)./1554-I
Makes: As per list of recommended brands as category I.
Page 80 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- a 4 Sq mm X 2 core 1 RM 90
03415
MAT- b 6 Sq mm X 2 core 1 RM 110
03416
MAT- c 10 Sq mm X 2 core 1 RM 133
03417
MAT- d 6 Sq mm X 4 core 1 RM 146
03418
MAT- e 10Sq mm X 4 core 1 RM 172
03419
MAT- f 16 Sq mm X 4 core 1 RM 202
03420
MAT- g 25 Sq mm X 3.5 core 1 RM 247
03421
MAT- h 35Sq mm X 3.5 core 1 RM 306
03422
MAT- i 50 Sq mm X 3.5 core 1 RM 405
03423
MAT- j 70 Sq mm X 3.5 core 1 RM 545
03424
MAT- k 95 Sq mm X 3.5 core 1 RM 680
03425
MAT- l 120 Sq mm X 3.5 core 1 RM 846
03426
MAT- m 150 Sq mm X 3.5 core 1 RM 985
03427
MAT- n 185 Sq mmX 3.5 core 1 RM 1247
03428
MAT- o 240 Sq mm X 3.5 core 1 RM 1587
03429
MAT- p 300Sq mm X 3.5 core 1 RM 1931
03430
MAT- q 400Sq mm X 3.5 core 1 RM 2485
03431
161 ELEC - Supply and transportation of following XLPE insulated, 1100V grade
4.1.2 armoured aluminum cable as per specification confirming to IS:7098 (Part
Page 81 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
- I)./1554-I.
Makes: As per list of recommended brands as category II.
MAT- a 4 Sq mm X 2 core 1 RM 85
03432
MAT- b 6 Sq mm X 2 core 1 RM 96
03433
MAT- c 10 Sq mm X 2 core 1 RM 117
03434
MAT- d 6 Sq mm X 4 core 1 RM 123
03435
MAT- e 10Sq mm X 4 core 1 RM 134
03436
MAT- f 16 Sq mm X 4 core 1 RM 150
03437
MAT- g 25 Sq mm X 3.5 core 1 RM 191
03438
MAT- h 35Sq mm X 3.5 core 1 RM 250
03439
MAT- i 50 Sq mm X 3.5 core 1 RM 331
03440
MAT- j 70 Sq mm X 3.5 core 1 RM 426
03441
MAT- k 95 Sq mm X 3.5 core 1 RM 557
03442
MAT- l 120 Sq mm X 3.5 core 1 RM 684
03443
MAT- m 150 Sq mm X 3.5 core 1 RM 785
03444
MAT- n 185 Sq mm X 3.5 core 1 RM 940
03445
MAT- o 240 Sq mm X 3.5 core 1 RM 1189
03446
MAT- p 300Sq mm X 3.5 core 1 RM 1439
03447
MAT- q 400Sq mm X 3.5 core 1 RM 1867
03448
Page 82 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
33 KV HT XLPE CABLES
162 ELEC- Supply and Transportation of XLPE insulated IS:7098/II/85 H.T. cable for
4.1.3 working voltage 33 KV Earthed with Stranded Compacted Circular
Aluminum Conductor Screened with Extruded Semi-conducting
compound, XLPE Insulated Screened with extruded semi-conducting
compound in combination with Copper Tape, cores laid up, inner sheath
of Thermoplastic tape, galvanized flat steel strip armoured and overall
Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete.
Makes: As per list of recommended brands.

MAT- a 3C X 95 Sq mm 1 RM 2070
03449
MAT- b 3C X 120 Sq mm 1 RM 2272
03450
MAT- c 3C X 150 Sq mm 1 RM 2509
03451
MAT- d 3C X 185 Sq mm 1 RM 2780
03452
MAT- e 3C X 240 Sq mm 1 RM 3168
03453
MAT- f 3C X 300 Sq mm 1 RM 3578
03454
MAT- g 3C X 400 Sq mm 1 RM 4162
03455
11 KV HT XLPE CABLES
163 ELEC- Supply and Transportation of XLPE insulated IS:7098/II/85 H.T. cable for
4.1.4 working voltage 11 KV Earthed with Stranded Compacted Circular
Aluminium Conductor Screened with Extruded Semi-conducting
compound, XLPE Insulated Screened with extruded semi-conducting
compound in combination with Copper Tape, cores laid up, inner sheath
of Thermoplastic tape, galvanized flat steel strip armoured and overall
Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete.
Makes: As per list of recommended brands.

MAT- a 3C X 35 Sq mm 1 RM 685
03456
MAT- b 3C X 50 Sq mm 1 RM 786
03457
Page 83 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 3C X 70 Sq mm 1 RM 935
03458
MAT- d 3C X 95 Sq mm 1 RM 1119
03459
MAT- e 3C X 120 Sq mm 1 RM 1291
03460
MAT- f 3C X 150 Sq mm 1 RM 1447
03461
MAT- g 3C X 185 Sq mm 1 RM 1691
03462
MAT- h 3C X 240 Sq mm 1 RM 2035
03463
MAT- i 3C X 300 Sq mm 1 RM 2413
03464
MAT- j 3C X 400 Sq mm 1 RM 2947
03465
Unarmoured and Armoured Copper Control
Cables
164 ELEC- Supply and Transportation of XLPE/PVC insulated & PVC sheathed
4.1.5 unarmoured control cables of 1.1 KV grade with copper conductor as per
IS 7098 Part-I -1988 etc., complete.
Makes: As per list of recommended brands.

MAT- a 2C x 1.5 sq.mm 1 RM 117

03466
MAT- b 3C x 1.5 sq.mm 1 RM 123
03467
MAT- c 4C x 1.5 sq.mm 1 RM 144
03468
MAT- d 5C x 1.5 sq.mm 1 RM 149
03469
MAT- e 6C x 1.5 sq.mm 1 RM 169
03470
MAT- f 8C x 1.5 sq.mm 1 RM 195
03471
MAT- g 10C x 1.5 sq.mm 1 RM 246

Page 84 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03472
MAT- h 12C x 1.5 sq.mm 1 RM 273
03473
MAT- i 14C x 1.5 sq.mm 1 RM 304
03474
MAT- j 19C x 1.5 sq.mm 1 RM 382
03475
MAT- k 2C x 2.5 sq.mm 1 RM 130
03476
MAT- l 3C x 2.5 sq.mm 1 RM 149
03477
MAT- m 4C x 2.5 sq.mm 1 RM 174
03478

MAT- n 5C x 2.5 sq.mm 1 RM 195

03479
MAT- o 6C x 2.5 sq.mm 1 RM 273
03480
MAT- p 8C x 2.5 sq.mm 1 RM 325
03481
MAT- q 10C x 2.5 sq.mm 1 RM 376
03482
MAT- r 12C x 2.5 sq.mm 1 RM 421
03483
MAT- s 14C x 2.5 sq.mm 1 RM 473
03484
MAT- t 19C x 2.5 sq.mm 1 RM 550
03485
165 ELEC- Supply and Transportation of stranded/solid copper conductor XLPE/PVC
4.1.5 A insulated & PVC sheathed, unarmoured and Overall Shielded
instrumentation/control cables of 1.1 KV grade with copper conductor as
per IS 7098 Part-I -1988 etc., complete.
Makes: As per list of recommended brands.
a 2 Core, 1.5 Sq.mm 1 RM 70
b 4 Core, 1.0 Sq.mm 1 RM 118

Page 85 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
166 ELEC- Supply, Laying, Termination of ISI Certified (for Signal & Field devices,
4.1.5 B Third Party Integration etc....) ATSC, PVC insulated, armored, Tinned
Copper, twisted, shielded, PE insulated, Cable with proper ferrules, lugs,
and other necessary accessories. The spec shall meet the system
manufacturer specifications including all charges complete etc., as
directed by Engineer in Charge/ departmental authorities.
Makes: As per list of recommended brands.

a 2 Core 1.5 sq.mm 1 RM 65

b 4 Core 1.5 sq.mm 1 RM 94
167 ELEC- Supply of Shielded unarmoured Cable, as per the survey done, Rate
4.1.5 C shall include required accessories, tools and tackles, transportation,
material, and labour etc., complete as instructed by Engineer In charge.
The contractor should follow the safety measures inside the premises.
Makes: As per list of recommended brands.
a 2 Core .75 Sq mm 1 RM 94
b 4 Core .75 Sq mm 1 RM 126
c 8 Core .75 Sq mm 1 RM 176
168 ELEC- Supply and Transportation of XLPE/PVC insulated & PVC sheathed
4.1.6 armoured cables of 1.1 KV grade with copper conductor as per IS 7098
Part-I -1988 etc., complete.
Makes: As per list of recommended brands.
MAT- a 2Cx1.5 sq.mm 1 RM 123
03486
MAT- b 2Cx2.5 sq.mm 1 RM 130
03487
MAT- c 2C x 4 sq.mm 1 RM 163
03488
MAT- d 2C x 6 sq.mm 1 RM 233
03489
MAT- e 2C x 10 sq.mm 1 RM 325
03490
MAT- f 2C x 16 sq.mm 1 RM 448
03491
MAT- g 3C x 4 sq.mm 1 RM 205
03492

Page 86 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- h 3C x 6 sq.mm 1 RM 273
03493
MAT- i 3C x 10 sq.mm 1 RM 340
03494
MAT- j 3C x 16 sq.mm 1 RM 476
03495
MAT- k 4C x 4 sq.mm 1 RM 285
03496
MAT- l 4C x 6 sq.mm 1 RM 408
03497
MAT- m 4C x 10 sq.mm 1 RM 612
03498
MAT- n 4C x 16 sq.mm 1 RM 1018
03499
MAT- o 4C x 25 sq.mm 1 RM 1632
03500
MAT- p 4C x 35 sq.mm 1 RM 2177
03501
MAT- q 4C x 50 sq.mm 1 RM 3128
03502
MAT- r 4C x 70 sq.mm 1 RM 4761
03503
CABLE TERMINATIONS AND ACCESSORIES
169 ELEC- Supply and Making heat shrinkable type indoor/ outdoor/straight through
4.1.7 terminations/joint kit of approved make suitable for XLPE insulated 33 KV
cable, with required components, preparation of cable ends, testing etc.
as required of following sizes.
Makes: As per list of recommended brands.
INDOOR
MAT- a 3 Core 95/120/150/185 sq mm Set 14611
03504
MAT- b 3 core 240/300/400 Sq mm Set 20328
03505
OUTDOOR
MAT- c 3 Core 95/120/150/185 sq mm Set 20328

Page 87 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03506
MAT- d 3 core 240/300/400 Sq mm Set 28587
03507
STRAIGHT THROUGH
MAT- e 3 Core 95/120/150/185 sq mm Set 41292
03508
MAT- f 3 core 240/300/400 Sq mm Set 60349
03509
170 ELEC- Supply and Making heat shrinkable type indoor /outdoor/straight through
4.1.8 terminations/ joint kit of approved make suitable for XLPE insulated 11
KV cable, with required components, preparation of cable ends, testing
etc. as required of following sizes.
Makes: As per list of recommended brands.
INDOOR
MAT- a 3 core 35/50 Sq mm Set 6353.00
03510
MAT- b 3 core 70/95 Sq mm Set 9529.00
03511
MAT- c 3 core120/150/185 Sq mm Set 10800.00
03512
MAT- d 3 core 240/300 Sq mm Set 11308.00
03513
MAT- e 3 core 400/500 Sq mm Set 11943.00
03514
OUTDOOR
MAT- f 3 core 35/50 Sq mm Set 10800
03515
MAT- g 3 core 70/95 Sq mm Set 13341
03516
MAT- h 3 core 120/150/185 Sq mm Set 14611
03517
MAT- i 3 core 240/300 Sq mm Set 15882
03518
MAT- j 3 core400/500 Sq mm Set 17787
03519

Page 88 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
STRAIGHT THROUGH
MAT- k 3 core 35/50 Sq mm Set 17152
03520
MAT- l 3 core 70/95 Sq mm Set 20328
03521
MAT- m 3 core 120/150/185 Sq mm Set 23505
03522
MAT- n 3 core 240/300 Sq mm Set 25410
03523
171 ELEC- Supply & Making heat shrinkable outdoor straight through joint for
4.1.9 following size of PVC/ XLPE insulated aluminum conductor cable of 1.1
KV grade including cost of compound, sleeves etc. as required.
Makes: As per list of recommended brands.
MAT- a 3.5core x 25/35/50 sq.mm Set 1906
03524
MAT- b 3.5 core x 70/95/120 sq.mm Set 3049
03525
MAT- c 3.5 core x 150/185/240 sq.mm Set 4447
03526
MAT- d 3.5 core x 300/400 sq.mm Set 6988
03527
MAT- e 4 core x 6/10/16 sq.mm Set 1016
03528
172 ELEC- Supply and making one end termination with heavy duty double
4.1.10 compression brass gland as per BS 6121:2005, IP 66 complete, SIBG
type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC
tape etc., for following size of Armoured PVC insulated & PVC sheathed/
XLPE aluminum conductor cable of 1100 volt grade as required of size.
Makes: As per list of recommended brands.
MAT- a 3.5 core x 25 sq.mm Set 273
03529
MAT- b 3.5 core x 35 sq.mm Set 363
03530
MAT- c 3.5 core x 50 sq.mm Set 424
03531
MAT- d 3.5 core x 70 sq.mm Set 629
03532
Page 89 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- e 3.5 core x 95 sq.mm Set 721
03533
MAT- f 3.5 core x 120 sq.mm Set 908
03534
MAT- g 3.5 core x 150 sq.mm Set 1089
03535
MAT- h 3.5 core x 185 sq.mm Set 1210
03536
MAT- i 3.5 core x 240sq.mm Set 1815
03537
MAT- j 3.5 core x 300 sq.mm Set 2178
03538
MAT- k 3.5 core x 400 sq.mm Set 2904
03539
MAT- l 4 core x 6/10/16 sq.mm Set 278
03540
173 ELEC- Supply and making one end termination with heavy duty single
4.1.11 compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG
type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC
tape etc., for following size of Armoured PVC insulated & PVC sheathed/
XLPE aluminum conductor cable of 1100 volt grade as required of size.
Makes: As per list of recommended brands.
MAT- a 2 core X 4/6/10 Sq mm Set 79.00
03541
MAT- b 4 core X 6/10/16 Sq mm Set 103.00
03542
MAT- c 3.5 core X 25 Sq mm Set 121.00
03543
MAT- d 3.5 core X 35Sq mm Set 182.00
03544
MAT- e 3.5 core X 50 Sq mm Set 194.00
03545
MAT- f 3.5 core X 70 Sq mm Set 212.00
03546
MAT- g 3.5 core X 95 Sq mm Set 254.00
03547

Page 90 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- h 3.5 core X 120 Sq mm Set 303.00
03548
MAT- i 3.5 coreX150 Sq mm Set 545.00
03549
MAT- j 3.5 coreX185 Sq mm Set 666.00
03550
MAT- k 3.5 coreX240 Sq mm Set 787.00
03551
MAT- l 3.5 coreX300Sq mm Set 1089.00
03552
MAT- m 3.5 coreX400Sq mm Set 1452.00
03553
174 ELEC- Supply and making end termination with heavy copper lugs (pin/ ring
4.1.12 type) as per IS specification, duly crimped with crimping tool, PVC tape
etc., of following size
Makes: As per list of recommended brands.
MAT- a up to 16 Sq mm each 25.00
03554
MAT- b 25 Sq mm each 34.00
03555
MAT- c 35Sq mm each 39.00
03556
MAT- d 50 Sq mm each 57.00
03557
MAT- e 70 Sq mm each 86.00
03558
MAT- f 95 Sq mm each 111.00
03559
175 ELEC- Supply and making end termination with heavy Aluminum lugs (pin/ ring
4.1.13 type) as per IS specification duly crimped with crimping tool, PVC tape
etc., of following size:
Makes: As per list of recommended brands.
MAT- a up to 16 Sq mm each 12.00
03560
MAT- b 25 Sq mm each 19.00
03561

Page 91 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 35Sq mm each 24.00
03562
MAT- d 50 Sq mm each 31.00
03563
MAT- e 70 Sq mm each 36.00
03564
MAT- f 95 Sq mm each 43.00
03565
MAT- g 120 Sq mm each 48.00
03566
MAT- h 150 Sq mm each 55.00
03567
MAT- i 185 Sq mm each 67.00
03568
MAT- j 240 Sq mm each 97.00
03569
MAT- k 300 Sq mm each 121.00
03570
MAT- l 400 Sq mm each 206.00
03571
4.2 CABLE TRAYS
176 ELEC- Supply, transportation & installation of following sizes of Hot Dipped
4.2.1 Galvanized Iron perforated cable trays without cover, including
horizontal and vertical bends, reducers tees, cross members and other
accessories as required and duly suspended from the ceiling/Wall with
suspenders etc., complete.
(NB: Add 30% Extra for perforated cable tray with cover)
MAT- a 100mm x 50mm x 1.6mm 1 RM 373
03572
MAT- b 150mm x 50mm x 1.6mm 1 RM 433
03573
MAT- c 300mm x 50mm x 1.6mm 1 RM 799
03574
MAT- d 450mm x 50mm x 2.0mm 1 RM 1158
03575
MAT- e 600mm x 50mm x 2.0mm 1 RM 1326

Page 92 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03576
MAT- f 300mm x 62.5mm x 2.0mm 1 RM 958
03577

MAT- g 450mm x 62.5mm x 2.0mm 1 RM 1285

03578
MAT- h 600mm x 62.5mm x 2.0mm 1 RM 1592
03579
MAT- i 750mm x 62.5mm x 2.0mm 1 RM 1884
03580
MAT- j 900mm x 62.5mm x 2.0mm 1 RM 2236
03581
MAT- k 600mm x 75mm x 2.0mm 1 RM 1778
03582
MAT- l 750mm x 75mm x 2.0mm 1 RM 1957
03583
MAT- m 900mm x 75mm x 2.0mm 1 RM 2302
03584
177 ELEC- Supply, transportation & installation of following sizes of Hot Dipped
4.2.2 Galvanized Iron ladder type cable trays with rungs at span of 250 mm
including horizontal and vertical bends, reducers tees, cross members
and other accessories as required and duly suspended from the
ceiling/wall with suspenders and etc., complete
MAT- a 150mm x 50mm x 2.0mm 1 RM 546
03585
MAT- b 300mm x 50mm x 2.0mm 1 RM 686
03586
MAT- c 450mm x 50mm x 2.0mm 1 RM 905
03587
MAT- d 600mm x 75mm x 2.0mm 1 RM 1118
03588
MAT- e 750mm x 75mm x 2.0mm 1 RM 1185
03589
MAT- f 900mm x 75mm x 2.0mm 1 RM 1258
03590
4.3 DOUBLE WALLED CORRUGATED HDPE PIPE

Page 93 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
178 ELEC- Supply and Transportation of ……….…. double walled corrugated HDPE
4.3.1 duct made as per specification BSEN - 500 86/IS 14930 Part-II.
Makes: As per list of recommended brands.
MAT- a Outer dia 50mm and Inner dia 38mm 1 RM 120
03591
MAT- b Outer dia 63mm and Inner dia 51mm 1 RM 154
03592
MAT- c Outer dia 78mm and Inner dia 63mm 1 RM 186
03593

MAT- d Outer dia 90mm and Inner dia 76mm 1 RM 200

03594
MAT- e Outer dia 120mm and Inner dia 103.5mm 1 RM 314
03595
MAT- f Outer dia 160 mm and Inner dia 136 mm 1 RM 466
03596
MAT- g Outer dia 180 mm and Inner dia 152 mm 1 RM 613
03597
MAT- h Outer dia 200 mm and Inner dia 170 mm 1 RM 726
03598
SECTION - 5
5.1 FANS
179 MAT- ELEC- Supply of 48" (1200mm) Sweep 5 star rated BLDC 1 No 3447
05508 5.1.1 (Brush less Direct Current) Ceiling Fan with double
ball bearings, input voltage 230V AC converted to 24
V DC, power input not more than 30W, air delivery
not less than 220 cubic meter/min and a minimum
service value of 7.0, with remote and without
Regulator.
Makes: As per list of recommended brands.
180 MAT- ELEC- Supply of 56" (1400mm) Sweep 5 star rated BLDC 1 No 4021
05509 5.1.2 (Brush less Direct Current) Ceiling Fan with double
ball bearings, input voltage 230V AC converted to 24
V DC, power input not more than 32W, air delivery
not less than 240 cubic meter/min and a minimum
service value of 7.0, with remote and without
Regulator.
Makes: As per list of recommended brands.
Page 94 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
181 MAT- ELEC- Supply of 48" (1200mm) Sweep star rated Ceiling 1 No 2405
03599 5.1.3 Fan, with double ball bearings, air delivery more than
200 cubic meter/min, but without Regulator.
Makes: As per list of recommended brands.

182 MAT- ELEC- Supply of 48" (1200mm) Sweep decorative Ceiling 1 No 2904
03600 5.1.4 Fan, with double ball bearings with all accessories
without Regulator.
Makes: As per list of recommended brands.
183 MAT- ELEC- Supply of 56" (1400mm) Sweep Ceiling Fan, with 1 No 2887
03602 5.1.5 double ball bearings, but without Regulator.
Makes: As per list of recommended brands.
184 MAT- ELEC- Supply of 16" (400mm) Wall mounted Fan. 1 No 2766
03603 5.1.6 Makes: As per list of recommended brands.
185 MAT- ELEC- Supply of 16" (400mm) Pedestal Fan. 1 No 3068
03604 5.1.7 Makes: As per list of recommended brands.
186 MAT- ELEC- Supply of 18" (450mm) Wall mounting / Pedestal Air 1 No 6950
03605 5.1.8 Circulators.
Makes: As per list of recommended brands.
187 MAT- ELEC- Supply of 24" (600mm) Wall mounting / Pedestal Air 1 No 8366
03606 5.1.9 Circulators.
Makes: As per list of recommended brands.
188 MAT- ELEC- Supply of 12" (300mm) Cabin fan. 1 No 2044
03607 5.1.10 Makes: As per list of recommended brands.

189 MAT- ELEC- Supply of 12" (300mm) Light duty exhaust fan with 1 No 1744
03608 5.1.11 metallic blades and wire guard etc complete.
Makes: As per list of recommended brands.

190 MAT- ELEC- Supply of 9" (225mm), Light duty exhaust fan with 1 No 1552
03609 5.1.12 double ball bearing and wire guard etc complete.
Makes: As per list of recommended brands.

191 MAT- ELEC- Supply of 12" (300mm) ISI, 900 RPM Heavy duty 1 No 3308
03610 5.1.13 exhaust fan with metallic blades with mark.
Makes: As per list of recommended brands.

Page 95 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
192 MAT- ELEC- Supply of 15" (375mm) ISI, 900 RPM Heavy duty 1 No 3849
03611 5.1.14 exhaust fan with metallic blades with ISI Mark.
Makes: As per list of recommended brands.

193 MAT- ELEC- Supply of 18" (450mm) ISI, 900 RPM Heavy duty 1 No 4931
03612 5.1.15 exhaust fan with metallic blades with ISI Mark.
Makes: As per list of recommended brands.

194 ELEC- Supply of 6" (150mm), Light duty exhaust fan with 1 No 1207
5.1.16 double ball bearing and wire guard etc complete.
Makes: As per list of recommended brands.

195 ELEC- Supply of 8" (200mm), Light duty exhaust fan with 1 No 1340
5.1.17 double ball bearing and wire guard etc complete.
Makes: As per list of recommended brands.

ELEC- Supply of 48" (1200mm) Sweep 5 star rated BLDC 1 No 3050

5.1.18 (Brush less Direct Current) Ceiling Fan with double
ball bearings, input voltage 230V AC converted to 24
V DC, power input not more than 30W, air delivery
not less than 220 cubic meter/min and a minimum
service value of 7.0, with Regulator.
Makes: As per list of recommended brands.

5.2 WATER HEATERS (Conventional & Solar)

196 ELEC- Supply, Transportation and fixing of storage / Pressure type Vertical /
5.2.1 Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water
heater with SS tank and ABS plastic body of ........ capacity to withstand
up to 6.5 bar of water pressure including all standard accessories and
dead weight pressure reducing valve on outlet side, including cost of 2
Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc.,
complete.
Makes: As per list of recommended brands.
MAT- a 15 Ltrs 1 No 11600
03613
MAT- b 25 Ltrs 1 No 13800
03614

Page 96 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
197 ELEC- Supply, Transportation, erection and Commissioning of MNRE approved
5.2.2 and confirming to IS 12933 P-1,2,3&5......... Tube Collector type Solar
Water heating System with temperature application of 60 degrees with
Stain less steel - 304L grade inner tank with PUF Insulation and
Aluminum Cladding for Outer Cover, suitable EPDM rubber pipe
connection from Collector to Solar Tank with electrical Heating back up
etc., with 3 years Guarantee for Solar system and additional 2 years
warranty.
Makes: As per list of recommended brands.
MAT- a 250 LPD 1 No 55660
03615
MAT- b 375LPD 1 No 77050
03616
MAT- c 500 LPD 1 No 87400
03617
MAT- d 1000 LPD 1 No 170200
03618
198 ELEC- Supply, Transportation, erection and Commissioning of MNRE approved
5.2.3 and confirming to IS 12933 P-1,2,3&5......... Flate plate Collector type
Solar Water heating System with temperature application of 60 degrees
with Stain less steel - 304L grade inner tank with PUF Insulation and
Aluminum Cladding for Outer Cover, suitable EPDM rubber pipe
connection from Collector to Solar Tank with electrical Heating back up
etc., with 3 years Guarantee for Solar system and additional 2 years
warranty.
Makes: As per list of recommended brands.
MAT- a 250 LPD 1 No 59800
03619
MAT- b 375 LPD 1 No 82800
03620
MAT- c 500 LPD 1 No 96025
03621
MAT- d 1000 LPD 1 No 189750
03622
HEAT PUMP

Page 97 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
199 ELEC- Supply, Transportation and fixing of Energy Efficient Heat pump(Hybrid)
5.2.4 water heater of Mono block storage / type Vertical / 230/250V single
phase 50 Hz rated water heater with SS tank coated with Enamel and
stain less body with IP X 4 water proof grade of ...... capacity Mono Block
unit to withstand up to 0.8 - 1.0 MPa bar of water pressure including 2
Kw Heating element and Auto Defrosting and with 50 MM puf insulation
with all standard accessories and dead weight pressure reducing valve
on out let side, including cost of CPVC Piping / Metallic hose pipe, testing
and all labour charges etc., complete.
Makes: As per list of recommended brands.
MAT- a 200 Ltr 1 No 125580
03623
MAT- b 300 Ltr 1 No 159390
03624
200 ELEC- Supply, Transportation and fixing of Energy Efficient Heat pump(Hybrid)
5.2.5 water heater of split type storage / type Vertical / 230/250V single phase
50 Hz rated water heater with SS tank coated with Enamel and preprinted
steel body with IP X 4 water proof grade of ..........capacity Mono Block
unit to withstand up to 0.8 - 1.0 MPa bar of water pressure including 2
Kw Heating element and Auto Defrosting and with 50 MM Puf insulation
with all standard accessories and dead weight pressure reducing valve
on out let side, including cost of CPVC Piping / Metallic hose pipe, testing
and all labour charges etc., complete.
Makes: As per list of recommended brands.
MAT- a 400 Ltr 1 No 154675
03625
MAT- b 500 Ltr 1 No 189336
03626
5.3 ACCESSORIES FOR WATER HEATERS
201 ELEC- Supply and fixing of stem type ISI marked (IS 3017 / 85) snap action
5.3.1 adjustable thermostat storage water heater including making connection
testing etc. as required.
MAT- a 11" stem thermostat 1 No 230
03627
MAT- b 7" stem thermostat 1 No 206
03628
202 MAT- ELEC- Supply and fixing of stem type, ISI marked, push to 1 No 273
03629 5.3.2 reset type auto thermal cut off and rated at 20 A 250
V including testing etc. as required.

Page 98 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
203 ELEC- Supply and fixing of ISI marked (IS:4159) marked copper sheathed,
5.3.3 nickel plated, mineral filled heating element including making connection
testing etc as required
MAT- a 3.0 KW 1 No 787
03630
MAT- b 2.0 KW 1 No 750
03631
204 ELEC- Supply and fixing of twin ceramic cartridge, shock and hard waterproof
5.3.4 heating element including making connection testing etc as required
MAT- a 3.0 KW 1 No 908
03632
MAT- b 2.0 KW 1 No 787
03633
205 ELEC- Supply and fixing of base plate assembly with neoprene rubber gasket,
5.3.5 inlet socket with inbuilt NRV/ PRV and drain out system and outlet socket
pipe, fusible plug assembly, mounting hardware complete etc. as
required.
MAT- a 15 Ltr. To 50 Ltr. Capacity SWH 1 No 1694
03634

206 MAT- ELEC- Supply and fixing of heavy duty C.P. connection for 1 set 303
03635 5.3.5 storage water heater for inlet and outlet of length
300-600 mm including the cost of nuts, washers etc
as required.
207 MAT- ELEC- Charges for brass welding of inner copper tank for job 484
03636 5.3.6 storage water heater including opening, refixing,
testing etc. as required
208 MAT- ELEC- Charges for descaling of storage water heater job 363
03637 5.3.7 including required chemical, opening, refixing,
testing as complete
209 MAT- ELEC- Charges for Fixing of storage water heater including job 787
03638 5.3.8 four nos. rag bolts of suitable size, supply & making
heavy gauge inlet, outlet C.P. connection, testing,
carrying from store to site, etc. as required
5.4 PUMPSETS
SINGLE PHASE SUBMERSIBLE MOTOR PUMP SETS

Page 99 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
210 ELEC- Supply and Transportation of ………., 5star rated submersible motor
5.4.1 pumpset, confirming to IS 8034 and motor confirming to IS 9283 with
waterproof winding, pump shall be suitable for various delivery head and
discharge with stainless steel shaft motor suitable for working on 240V ±
10%, single phase 50 Hz AC supply, etc complete for 4" Bore well.
Makes: As per list of recommended brands as category I.
MAT- a 0.75HP 8 Stage 1 No 17122
03639
MAT- b 1.00HP 10 Stage 1 No 19602
03640
MAT- c 1.00HP 15 Stage 1 No 20207
03641
MAT- d 1.50HP 21 Stage 1 No 24503
03642
MAT- e 2.00HP 25 Stage 1 No 29403
03643
f
211 ELEC- Supply and Transportation of ………..,5star rated submersible motor
5.4.2 pumpset, confirming to IS 8034 and motor confirming to IS 9283 with
water proof winding, pump shall be suitable for various delivery head and
discharge with stainless steel shaft. Motor suitable for working on 240V ±
10% , Single Phase 50 Hz AC supply, etc complete for 4" Bore well.
Makes: As per list of recommended brands as category II.

MAT- a 0.75HP 8 Stage 1 No 15367

03644
MAT- b 1.00HP 10 Stage 1 No 17545
03645
MAT- c 1.00HP 15 Stage 1 No 18150
03646
MAT- d 1.50HP 21 Stage 1 No 22022
03647
MAT- e 2.00HP 25 Stage 1 No 26439
03648
f
THREE PHASE SUBMERSIBLE MOTOR PUMP SETS.

Page 100 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
212 ELEC- Supply and Transportation of ………..,5star rated submersible motor
5.4.3 pumpset, confirming to IS 8034 and motor confirming to IS 9283 with
water proof winding, Pump shall be suitable for various delivery head and
discharge with stainless steel shaft. Motor suitable for working on 415V ±
10% , Three Phase 50 Hz AC supply, etc complete for 4" Bore well.
Makes: As per list of recommended brands as category I.
MAT- a 3.00HP 15Stage 1 No 23837
03649
MAT- b 4.00HP 20Stage 1 No 27830
03650
MAT- c 5.00HP 25Stage 1 No 32912
03651
213 ELEC- Supply and Transportation of ………..,5star rated submersible motor
5.4.4 pumpset, confirming to IS 8034 and motor confirming to IS 9283 with
water proof winding, Pump shall be suitable for various delivery head and
discharge with stainless steel shaft. Motor suitable for working on 415V ±
10%, Three Phase 50 Hz AC supply, etc complete for 4" Bore well.
Makes: As per list of recommended brands as category II.

MAT- a 3.00HP 15Stage 1 No 22385

03652
MAT- b 4.00HP 20Stage 1 No 26136
03653
MAT- c 5.00HP 25Stage 1 No 30976
03654
214 ELEC- Supply and Transportation of ……….,5star rated submersible motor
5.4.5 pumpset, confirming to IS 8034 and motor confirming to IS 9283 with
waterproof winding, Pump shall be suitable for various delivery head and
discharge with stainless steel shaft. Motor suitable for working on 415V ±
10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.
Makes: As per list of recommended brands as category I.

MAT- a 3.00HP 5-10 Stage 1 No 36300

03655
MAT- b 5.00HP, 5-10Stage 1 No 40838
03656
MAT- c 5.00HP, 12-16 Stage 1 No 46585
03657

Page 101 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- d 7.50HP, 5-10 Stage 1 No 45859
03658
MAT- e 7.50HP, 12-16 Stage 1 No 50820
03659
MAT- f 7.50HP, 20-24 Stage 1 No 52030
03660
MAT- g 10HP, 5-10 Stage 1 No 53845
03661
MAT- h 10HP, 12-16 Stage 1 No 55660
03662
MAT- i 10HP, 20-24 Stage 1 No 62920
03663
MAT- j 12.5HP, 8-12 Stage 1 No 55660
03664
MAT- k 12.5HP, 16-24 Stage 1 No 65340
03665
MAT- l 15HP, 8-12 Stage 1 No 70059
03666
MAT- m 15HP, 16-24 Stage 1 No 72358
03667
MAT- n 20HP 10-20 Stage 1 No 84095
03668
MAT- o 20HP 30-40 Stage 1 No 87725
03669
MAT- p 25HP 20-25 Stage 1 No 95590
05510
215 ELEC- Supply and Transportation of ………..,5star rated submersible motor
5.4.6 pumpset, confirming to IS 8034 and motor confirming to IS 9283 with
water proof winding, Pump shall be suitable for various delivery head and
discharge with stainless steel shaft. Motor suitable for working on 415V ±
10% , Three Phase 50 Hz AC supply, etc complete for 6" Bore well.
Makes: As per list of recommended brands as category II.

MAT- a 3.00HP 5-10 Stage 1 No 32670

03670
MAT- b 5.00HP, 5-10Stage 1 No 36663
03671
Page 102 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 5.00HP, 12-16 Stage 1 No 41927
03672
MAT- d 7.50HP, 5-10 Stage 1 No 41261
03673
MAT- e 7.50HP, 12-16 Stage 1 No 45738
03674
MAT- f 7.50HP, 20-24 Stage 1 No 46827
03675
MAT- g 10HP, 5-10 Stage 1 No 48400
03676
MAT- h 10HP, 12-16 Stage 1 No 50215
03677
MAT- i 10HP, 20-24 Stage 1 No 56628
03678
MAT- j 12.5HP, 8-12 Stage 1 No 50215
03679
MAT- k 12.5HP, 16-24 Stage 1 No 58806
03680
MAT- l 15HP, 8-12 Stage 1 No 63041
03681
MAT- m 15HP, 16-24 Stage 1 No 65098
03682
MAT- n 20HP 10-20 Stage 1 No 75625
03683
MAT- o 20HP 30-40 Stage 1 No 78892
03684
SINGLE PHASE OPEN WELL SUBMERSIBLE MOTOR PUMP SETS

216 ELEC- Supply and Transportation of ……...Single phase open well submersible
5.4.7 motor pump set confirms to IS 14220 : 1994.
Makes: As per list of recommended brands as category I.
MAT- a 1.00HP 1 No 14907
03685
MAT- b 1.50HP 1 No 16771
03686
MAT- c 3.00HP 1 No 22893
Page 103 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03687
217 ELEC- Supply and Transportation of ……...Single phase open well ISI
5.4.8 submersible motor pumpset confirms to IS 14220 : 1994.
Makes: As per list of recommended brands as category II.
MAT- a 1.00HP 1 No 13976
03688
MAT- b 1.50HP 1 No 15972
03689
MAT- c 3.00HP 1 No 21762
03690
THREE PHASE OPEN WELL SUBMERSIBLE PUMP SETS

218 ELEC- Supply and Transportation of ……... Three phase open well ISI
5.4.9 submersible motor pumpset confirms to IS 14220: 1994. .
Makes: As per list of recommended brands as category I.
MAT- a 3.00HP (65x50) 1 No 22893
03691
MAT- b 5.00HP (75x65) 1 No 28617
03692
MAT- c 7.50HP (100x75) 1 No 33941
03693
MAT- d 10.00HP (100x75) 1 No 43258
03694
219 ELEC- Supply and Transportation of ……... Three phase open well ISI
5.4.10 submersible motor pumpset confirms to IS 14220 : 1994.
Makes: As per list of recommended brands as category II. .

MAT- a 3.00HP(65x50) 1 No 21962

03695
MAT- b 5.00HP(75x65) 1 No 26886
03696
MAT- c 7.50HP(100x75) 1 No 31944
03697
MAT- d 10.00HP(100x75) 1 No 41261
03698

Page 104 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
SINGLE PHASE MONO BLOCK MOTOR PUMP SETS.

220 ELEC- Supply and Transportation of ……. Single phase Mono block CI body
5.4.11 motor pumpset confirms to IS 9079:2002
Makes: As per list of recommended brands as category I.

MAT- a 0.5HP(25x25mm) 1 No 6655

03699
MAT- b 1.0HP (25x25mm) 1 No 9517
03700
MAT- c 1.5HP(32x25mm) 1 No 12778
03701
221 ELEC- Supply and Transportation of ……. Single phase Mono block CI body
5.4.12 motor pumpset confirms to IS 9079:2002
Makes: As per list of recommended brands as category II.
MAT- a 0.5HP(25x25mm) 1 No 6256
03702
MAT- b 1.0HP (25x25mm) 1 No 9051
03703
MAT- c 1.5HP(32x25mm) 1 No 12179
03704
222 ELEC- Supply and Transportation of………. Three phase ISI self priming Mono
5.4.13 block IP44 motor pumpset .
Makes: As per list of recommended brands as category I.
MAT- a 2.00HP(40x40mm) 1 No 18900
03705
MAT- b 3.0HP (50x50mm) 1 No 25555
03706
MAT- c 5.00HP(80x80mm) 1 No 30879
03707
223 ELEC- Supply and Transportation of………. Three phase ISI self priming Mono
5.4.14 block IP44 motor pumpset .
Makes: As per list of recommended brands as category II.
MAT- a 2.00HP(40x40mm) 1 No 17969
03708
MAT- b 3.0HP (50x50mm) 1 No 24357
03709
Page 105 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 5.00HP(80x80mm) 1 No 29548
03710
CONTROL PANEL BOARD FOR MOTOR PUMPSETS
224 MAT- ELEC- Fabrication , transportation and supply of suitable 1 No 5445
03711 5.4.15 size panel board for single phase submersible
motor up to 1.5 HP consisting of relay, Contactor,
starting and running capacitors, Voltmeter, Ammeter,
indicator lamps, MCB , on/off switch including supply
and fixing of DOL starter of complete.,
Makes: As per list of recommended brands.
225 MAT- ELEC- Fabrication , transportation and supply of suitable 1 No 7260
03712 5.4.16 size panel board for single phase submersible
motor 2 to 3HP consisting of relay, Contactor,
starting and running capacitors, Voltmeter, Ammeter,
indicator lamps, MCB , on/off switch including supply
and fixing of DOL starter of complete.,.
Makes: As per list of recommended brands.
226 ELEC- Fabrication ,transportation and and supply of wall mounted control panel
5.4.17 board of size 600x600x250mm made of 18 SWG CRCA sheet steel
enclosure, 14 SWG mounting plate for cable entry fabricated , painted
with two coats of Red oxide primer and two coats of Grey paint, lock and
key arrangements two side louvres with weld mesh inside etc., complete
consisting of the following equipment with all internal wiring using L&T /
Finolex copper FRLS cables of suitable size and capacity and cable
clamp etc complete for 3 phase motor pump sets.
Makes: As per list of recommended brands .
Voltmeter ; 0-500 V 96x96mm size.
0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No.

Single phase preventor of suitable range - 1No.

32 A TP, 10KA MCB. - 1No

Indication lamps (R-Y-B) with switch control - 1set

Voltmeter & Ammeter selector switch - 2 Nos
Supply and fixing of ISI Mark suitable capacitor
MAT- a Upto 7.5 HP with DOL Starter of. 1 No 9680
03713

Page 106 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b above 7.5 HP to 12.5 HP with Star- Delta Starter 1 No 16940
03714
MAT- c From 15 HP up to 20 HP 1 No 22385
03715 with Automatic Star Delta Starter

227 ELEC- Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With SS
5.4.18 enclosure comprising of contactor with bi-metalic relay with necessary
push buttons, etc., complete suitable for…...
Makes: As per list of recommended brands.
MAT- a up to 3 HP 1 No 1265
03716

228 ELEC- Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz..enclosed with no
5.4.19 volt coil and overload protection with necessary materials, etc., complete
suitable for…...
Makes: As per list of recommended brands.
MAT- a up to 3 HP 1 No 2263
03717
MAT- b 5 to 7.5 HP 1 No 2529
03718
MAT- c 10 HP 1 No 2795
03719
229 ELEC- Supply & Fixing of Star-Delta Starter 415V, 3 phase, 50Hz.. enclosed
5.4.20 with no volt coil, overload protection and single phase preventor , etc.,
complete suitable for
Makes: As per list of recommended brands.
MAT- a 12.50 to 15HP. 1 No 8228
03720
MAT- b 25HP to 30HP 1 No 13576
03721
UPVC PIPES AND FITTINGS
230 ELEC- Supply and delivery of ................. for submersible motors with both ends
5.4.21 square threaded, with rubber 'O' rings with smooth inner surface which
can take the minimum load of 2100 to 4000 Kgs weights.
Makes: As per list of recommended brands.
MAT- a 42 / 32mm dia UPVC raising column pipe, with 1RM 157
03722 standing upto 20 Kgs / CM2 upto 200 Mts

Page 107 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b 48 / 40mm UPVC pipe with standing upto 20 Kgs / 1RM 194
03723 CM2 upto 200 Mts
MAT- c 60/50 mm UPVC pipe with standing upto 20 Kgs / 1RM 278
03724 CM2 upto 200 Mts
MAT- d 75/65 mm UPVC pipe with standing upto 20 Kgs / 1RM 375
03725 CM2 upto 200 Mts
MAT- e 88/80 mm UPVC pipe with standing upto 20 Kgs / 1RM 539
03726 CM2 upto 200 Mts
231 MAT- ELEC- Supply and delivery of heavy duty couplings 42/32 1NO 48
03727 5.4.22 mm UPVC pipe (27 Kgs / CM 2 ) capable of with
standing up to 27 Kgs / CM2 above 200 mts and
upto 300 mts
232 MAT- ELEC- Supply and delivery of heavy duty couplings 48/40 1NO 67
03728 5.4.23 mm UPVC pipe (27 Kgs / CM 2 ) capable of with
standing up to 27 Kgs / CM2 above 200 mts and
upto 300 mts
233 MAT- ELEC- Supply and delivery of heavy duty couplings 60/50 1NO 73
03729 5.4.24 mm UPVC pipe (27 Kgs / CM 2 ) capable of with
standing up to 27 Kgs / CM2 above 200 mts and
upto 300 mts
234 MAT- ELEC- Supply and delivery off heavy duty couplings 75/65 1NO 85
03730 5.4.25 mm UPVC pipe (27 Kgs / CM 2 ) capable of with
standing up to 27 Kgs / CM2 above 200 mts and
upto 300 mts
235 MAT- ELEC- Supply and delivery of heavy duty couplings 88/80 1NO 97
03731 5.4.26 mm UPVC pipe (27 Kgs / CM 2 ) capable of with
standing up to 27 Kgs / CM2 above 200 mts and
upto 300 mts
236 ELEC- Supply and Delivery of CI Adopter Assembly
5.4.27 Makes: As per list of recommended brands.

MAT- a 1/2" (48/40mm) 1NO 696

03732
MAT- b 2" (60/50mm) 1NO 920
03733
MAT- c 2 1/2" (75/65 mm) 1NO 1186
03734

Page 108 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
237 ELEC- Supply and Delivery of pump guard assembly with 2Nos SS Powder
5.4.28 coated flange and 2Nos SS Rods with nut and colter pin.
Makes: As per list of recommended brands.

MAT- a 1 1/2" (48/40mm) 1NO 436

03735
MAT- b 2" (60/50mm) 1NO 484
03736
MAT- c 2 1/2" (75/65 mm) 1NO 666
03737
MAT- d 3"(88/80 mm) 1NO 968
03738
5.5 AIR CONDITIONERS

MAT- 5.5.1 a Deleted

03743
MAT- 5.5.1 b Deleted
03744

MAT- 5.5.1 c Deleted

03747

MAT- 5.5.1 d Deleted

03748

Inverter Split AC Units (Cooling Only)

238 ELEC- Supply of ...............INVERTER Model Cool type split AC unit with high
5.5.1 A wall mounted Single Split indoor unit and outdoor condensing unit
Hermetically sealed compressor suitable for operation on 230V, 50Hz,
1Phase AC supply capable of performing Heat cool dehumidifying air
circulating and filtering with cooling and condensing units with 3 mts of
copper piping, insulation kit and 4 mts of 4 core copper flexible chord
with cordless remote control etc., dual barrier coating in order to protect
coil form oxidation.
1.5TR Split ACs

Page 109 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
a 1.5 TR, 3 Star capable of delivering 18000 BTU/hr 1 No 53734
and above with operating on refrigerant R-32/ R-
410A.
Makes: As per list of recommended brands as
category I.
b 1.5 TR, 3 Star capable of delivering 18000 BTU / hr 1 No 40805
and above with operating on refrigerant R-32 / R-
410A.
Makes: As per list of recommended brands as
category II.
2.0 TR Split ACs
c 1.8/1.9/2.0TR, 3 Star capable of delivering not less 1 No 65148
than 21600 BTU/hr and above with operating on
refrigerant R-410A / R-32
Makes: As per list of recommended brands as
category I.
d 1.8/1.9/2.0TR, 3 Star capable of delivering not less 1 No 53189
than 21600 BTU/hr and above with operating on
refrigerant R-410A / R-32
Makes: As per list of recommended brands as
category II.

239 ELEC- Supply of ...............INVERTER Model Cool type split AC unit with high
5.5.2 wall mounted Single Split indoor unit and outdoor condensing unit
Hermetically sealed compressor suitable for operation on 230V, 50Hz,
1Phase AC supply capable of performing Heat cool dehumidifying air
circulating and filtering with cooling and condensing units with 3 mts of
copper piping, insulation kit and 4 mts of 4 core copper flexible chord
with cordless remote control etc., dual barrier coating in order to protect
coil form oxidation.
0.8/ 1.0TR Split ACs
MAT- a 0.8 TR, 5 Star capable of delivering 9600 BTU/hr and above 43643
05511 with operating on refrigerant R-32/ R-410A.
Makes: As per list of recommended brands as category I.
MAT- b 0.8 TR, 5 Star capable of delivering 9600 BTU/hr and above 35452
05512 with operating on refrigerant R-32/ R-410A.
Makes: As per list of recommended brands as category II.

Page 110 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 1.0 TR, 5 Star capable of delivering 12000 BTU/hr and above 48703
05513 with operating on refrigerant R-32/ R-410A.
Makes: As per list of recommended brands as category I.
MAT- d 1.0 TR 5 Star capable of delivering 12000 BTU/hr and above 40259
05514 with operating on refrigerant R-32/ R-410A.
Makes: As per list of recommended brands as category II.

1.5, 1.8 & 2.0TR Split ACs

MAT- e 1.5 TR, 5 star capable of delivering 18000 BTU/hr 1 No 64421
03753 and above with operating on refrigerant R-32/ R-
410A, COP not less than 4.5.
Makes: As per list of recommended brands as
category I.
MAT- f 1.5 TR, 5 star capable of delivering 18000 BTU/hr 1 No 50294
03754 and above with operating on refrigerant R-32/ R-
410A, COP not less than 4.5.
Makes: As per list of recommended brands as
category II.
MAT- g 1.8/1.9/2.0TR, 5star capable of delivering not less 1 No 75710
05515 than 21600 BTU/hr and above with operating on
refrigerant R-410A / R-32
Makes: As per list of recommended brands as
category I.
MAT- h 1.8/1.9/2.0TR, 5 Star capable of delivering not less 1 No 61650
05516 than 21600 BTU/hr and above with operating on
refrigerant R-410A / R-32
Makes: As per list of recommended brands as
category II.
MAT- i 2.2 TR, 5 star capable of delivering 26400 BTU/hr 1 No 84123
03757 and above with operating on refrigerant R-410A / R-
32
Makes: As per list of recommended brands as
category I.
MAT- j Deleted 1 No
03758

INVERTER CASSETTE TYPE AC UNITS

Page 111 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
240 ELEC- Supply of .......... inverter Cassette type AC unit with ceiling mounted
5.5.35 indoor unit and outdoor condensing unit Hermetically sealed
compressor suitable for operation on AC supply capable of performing
cooling dehumidifying air circulating and filtering with cooling and
condensing units etc. complete with Wireless remote controller, without
refrigerant piping and cable.
MAT- a 1.5 TR, 4-star Single Phase capable of delivering 1 No 92345
03759 18000 BTU / hr and above with operating on
refrigerant R-32 / R-410A.
Makes: As per list of recommended brands as
category I.
MAT- b 2.0TR, 4-star Single Phase capable of delivering 1 No 103604
03760 24000 BTU / hr and above with operating on
refrigerant R-32 / R-410A, .
Makes: As per list of recommended brands as
category I.
MAT- c 2.0TR 4-star Single Phase capable of delivering 1 No 94875
03761 24000 BTU / hr and above with operating on
refrigerant R-32 / R-410A.
Makes: As per list of recommended brands as
category II.
MAT- d 3.5 TR 4-star Three Phase capable of delivering 1 No 174570
03762 42000 BTU / hr and above with operating on
refrigerant R-32 / R-410A.
Makes: As per list of recommended brands as
category I.
MAT- e 3.5 TR 4-star Three Phase capable of delivering 1 No 171408
03763 42000 BTU / hr and above with operating on
refrigerant R-32 / R-410A.
Makes: As per list of recommended brands as
category II.
MAT- f 4.0 TR 4-star Three Phase capable of delivering 1 No 188612
03764 48000 BTU / hr and above with operating on
refrigerant R-32 / R-410A.
Makes: As per list of recommended brands as
category I.
MAT- g 4.0 TR 4-star Three Phase capable of delivering 1 No 163185
03765 48000 BTU / hr and above with operating on
refrigerant R-32 / R-410A.
Makes: As per list of recommended brands as
category II.
Page 112 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
TOWER MODEL (Vertical) TYPE AC UNITS
241 ELEC- Supply of Slim line / Tower Model/Verticool type ..........split AC unit
5.5.36 with indoor unit and floor mounted outdoor condensing unit with 3.5 mtr of
copper piping, insulation kit and 4 mtr of 4 core copper flexible card with
refrigerant 410A/R32, Hermetically sealed Scroll compressor suitable for
operation on AC supply capable of performing cooling dehumidifying air
circulating and filtering with cooling and condensing units etc complete
with cordless remote control
MAT- a 3.0/ 3.3TR Three Phase capable of delivering 39600 1 No 120871
03766 BTU/hr and above with operating on refrigerant R-
32/R-410. Makes: As per list of recommended
brands.
MAT- b 3.8 /4.0TR Three Phase capable of delivering 45600 1 No 128177
03767 BTU/hr and above with operating on refrigerant R-
32/R-410.
Makes: As per list of recommended brands.

MAT- c 4.5/ 4.6TR Three Phase capable of delivering 55200 1 No 139466

03768 BTU/hr and above with operating on refrigerant R-
32/R-410.
Makes: As per list of recommended brands.
HVAC SYSTEMS(VRV/VRF)
242 ELEC- Supply of Air cooled VRV / VRF Air Conditioning system of having high
5.6.1 COP complete with indoor and outdoor units duly charged with refrigerant
R-410A and oil (first charge) suitable for cooling with individual controller,
(suitable for 415 +/- 10% for outdoor and 230 +/- 5% for indoor units) and
complete with all accessories, fittings etc. The units shall be BMS
Compatible.
Outdoor Units shall be fully inverter system complete with 100%
scroll/rotary compressor and drive arrangement, initial charge of
refrigerant (R-410A),refrigerant piping, drier, sight glass, dual
pressure cutout all housed and supported properly in cabinet, air cooled
condenser & its controller for following capacities. The VRV system shall
be cooling only system. Makes: As per list of recommended brands as
category I.
Type of Compressor: Hermitic sealed Inverter Scroll/Twin Rotary

ODU should deliver the required capacity at the ambient conditions of the
place as per ISHRAE Standards.

Page 113 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
The System should be highly energy efficient, and COP shall not be less
than 3.7. The outdoor units shall be suitable for operation between 5 and
53 deg C in cooling mode.

VRV/VRF OUTDOOR UNITS

MAT- a 6 HP 1 No 200100
03769
MAT- b 8 HP 1 No 218040
03770
MAT- c 10 HP 1 No 270480
03771
MAT- d 12 HP 1 No 303600
03772
MAT- e 14 HP 1 No 343620
03773
MAT- f 16 HP 1 No 391920
03774
MAT- g 18 HP 1 No 430560
03775
MAT- h 20 HP 1 No 473340
03776

243 ELEC- Supply of Air cooled VRV / VRF Air Conditioning system of having high
5.6.2 COP complete with indoor and outdoor units duly charged with refrigerant
R-410A and oil (first charge) suitable for cooling with individual controller,
(suitable for 415 +/- 10% for outdoor and 230 +/- 5% for indoor units) and
complete with all accessories, fittings etc. The units shall be BMS
Compatible.
Outdoor Units shall be fully inverter system complete with 100%
scroll/rotary compressor and drive arrangement, initial charge of
refrigerant (R-410A),refrigerant piping, drier, sight glass, dual
pressure cutout all housed and supported properly in cabinet, air cooled
condenser & its controller for following capacities. The VRV system shall
be cooling only system.
Makes: As per list of recommended brands as category II.
Type of Compressor: Hermitic sealed Inverter Scroll/Twin Rotary

Page 114 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
ODU should deliver the required capacity at the ambient conditions of the
place as per ISHRAE Standards.
The System should be highly energy efficient, and COP shall not be less
than 3.7. The outdoor units shall be suitable for operation between 5 and
53 deg C in cooling mode.

MAT- a 6 HP 1 No 184230
05517
MAT- b 8 HP 1 No 200100
05518
MAT- c 10 HP 1 No 248814
05519
MAT- d 12 HP 1 No 279312
05520
MAT- e 14 HP 1 No 316020
05521
MAT- f 16 HP 1 No 360180
05522
MAT- g 18 HP 1 No 396060
05523
MAT- h 20 HP 1 No 434700
05524
244 MAT- ELEC- Supply and Installation of Ref Nets for Double ODU 1 No 6072
03777 5.6.3 connections
245 MAT- ELEC- Supply and Installation of Ref Nets for Triple ODU 1 No 11638
03778 5.6.4 connections
246 MAT- ELEC- Supply and Installation of Multi Connection Joint / 1 No 5313
03779 5.6.5 Ref Nets for IDUs
VRV/VRF INDOOR UNITS

247 ELEC- Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower
5.6.6 section and drive arrangement, initial charge of refrigerant & oil, integral
refrigerant piping, electronic expansion valve, electrical panel with
controls and duly wired, thermostatic control.
Makes: As per list of recommended brands as category I.
Type Of Units : Hi Wall type units

Page 115 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- a 1.0 TR 1 No 34788
03780
MAT- b 1.6 TR 1 No 37950
03781
MAT- c 2.0 TR 1 No 39215
03782
248 ELEC- Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower
5.6.7 section and drive arrangement, initial charge of refrigerant & oil, integral
refrigerant piping, electronic expansion valve, electrical panel with
controls and duly wired, thermostatic control.
Makes: As per list of recommended brands as category II.
Type Of Units : Hi Wall type units 1 No
MAT- a 1.0 TR 1 No 34914
05525
MAT- b 1.6 TR 1 No 36053
05526
MAT- c 2.0 TR 1 No 36053
05527
249 ELEC- Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower
5.6.8 section and drive arrangement, initial charge of refrigerant & oil, integral
refrigerant piping, electronic expansion valve, electrical panel with
controls and duly wired, thermostatic control.
Makes: As per list of recommended brands as category I.

Type Of Units : Round flow/4 way Cassette units

MAT- a 1.0 TR 1 No 46299
03783
MAT- b 1.5/1.6 TR 1 No 51865
03784
MAT- c 2.0 TR 1 No 53130
03785
MAT- d 2.6 TR 1 No 58190
03786
MAT- e 3.2 TR 1 No 59455
03787

Page 116 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- f 4.0 TR 1 No 60720
03788
MAT- g 4.5 TR 1 No 63630
03789
250 ELEC- Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower
5.6.9 section and drive arrangement, initial charge of refrigerant & oil, integral
refrigerant piping, electronic expansion valve, electrical panel with
controls and duly wired, thermostatic control.
Makes: As per list of recommended brands as category II.

Type Of Units : Round flow/4 way Cassette units

MAT- a 1.0 TR 1 No 42504
05528
MAT- b 1.5/1.6 TR 1 No 47691
05529
MAT- c 2.0 TR 1 No 48829
05530
MAT- d 2.6 TR 1 No 53510
05531
MAT- e 3.2 TR 1 No 54648
05532
MAT- f 4.0 TR 1 No 55660
05533
MAT- g 4.5 TR 1 No 58443
05534
251 ELEC- Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower
5.6.10 section and drive arrangement, initial charge of refrigerant & oil, integral
refrigerant piping, electronic expansion valve, electrical panel with
controls and duly wired, thermostatic control.
Makes: As per list of recommended brands as category I.
Type Of Units : High Static Duct Units
MAT- a 3.2 TR 1 No 63630
03790
MAT- b 4.0 TR 1 No 66792
03791
MAT- c 4.5 TR 1 No 79063

Page 117 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03792
MAT- d 5.5 TR 1 No 106513
03793
MAT- e 6.3 TR 1 No 112206
03794
MAT- f 8.0 TR 1 No 118278
03795
252 ELEC- Supply of Indoor Units consisting of 2/3/4 row deep DX coil, filter, blower
5.6.11 section and drive arrangement, initial charge of refrigerant & oil, integral
refrigerant piping, electronic expansion valve, electrical panel with
controls and duly wired, thermostatic control.
Makes: As per list of recommended brands as category II.
Type Of Units : High Static Duct Units
MAT- a 3.2 TR 1 No 58190
05535
MAT- b 4.0 TR 1 No 60720
05536
MAT- c 4.5 TR 1 No 72738
05537
MAT- d 5.5 TR 1 No 97405
05538
MAT- e 6.3 TR 1 No 102465
05539
MAT- f 8.0 TR 1 No 108790
05540
253 MAT- ELEC- Supply, Installation, Testing & Commissioning Simple 1771
03796 5.6.12 wireless remote controller to control the IDUs with Machine
coding, ON-OFF & Temp. setting of individual IDU and group
of IDU.
254 ELEC- Supply of Indoor Units consisting of 3/4 row deep DX coil, drain pan,
5.6.13 filter, blower section and drive arrangement, initial charge of refrigerant &
oil, integral refrigerant piping, electronic expansion valve, electrical panel
with controls, duly wired, thermostatic control corded/cordless remote
controller supports for indoor units etc.
Makes: As per list of recommended brands as category I.
Type of Units: Ductable TFA Units

Page 118 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- a 4TR 1 No 104553
03797
MAT- b 6TR 1 No 125994
03798
MAT- c 8TR 1 No 132825
03799
255 ELEC- Supply of Indoor Units consisting of 3/4 row deep DX coil, drain pan,
5.6.14 filter, blower section and drive arrangement, initial charge of refrigerant &
oil, integral refrigerant piping, electronic expansion valve, electrical panel
with controls, duly wired, thermostatic control corded/cordless remote
controller supports for indoor units etc.
Makes: As per list of recommended brands as category II.
Type of Units: Ductable TFA Units
MAT- a 4TR 1 No 96140
05541
MAT- b 6TR 1 No 115115
05542
MAT- c 8TR 1 No 122073
05543
HVAC-LOW SIDE WORKS
256 ELEC- Lifting, shifting, positioning, Installation and testing of the ODUs including
5.6.15 all accessories with Vibration Isolators for ODUs etc., complete

MAT- A 6 to 8 HP 1 No 8694
03800
MAT- B 10 to 12 HP 1 No 12420
03801
MAT- c 14 to 20 HP 1 No 14904
03802
257 ELEC- Lifting Shifting, Positioning, Installation Testing and commissioning of
5.6.16 the following indoor units with including all required accessories etc
complete.,
Type Of Units : Hi Wall Units 1 No
MAT- a 1.0 TR to 2.0 TR 1 No 1490
03803

Page 119 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
258 ELEC- Lifting Shifting, Positioning, Installation Testing and commissioning of
5.6.17 the following indoor units with including all required accessories etc
complete.,
Type Of Units : Round Flow /4 way Cassette units
MAT- a 1.0 TR to 2.0 TR 1 No 1863
03804
MAT- b 2.6 TR to 4.5 TR 1 No 3105
03805
259 ELEC- Lifting Shifting, Positioning, Installation Testing and commissioning of
5.6.18 the following indoor units with including all required accessories etc
complete.,
Type Of Units : High Static Duct Units
MAT- a 3.2 TR to 4.5 TR 1 No 3726
03806
MAT- b 5.5 TR to 8.0 TR 1 No 5589
03807
260 ELEC- Installation, testing & commissioning of Indoor Units consisting of 2/3/4
5.6.19 row deep DX coil, filter, blower section and drive arrangement, initial
charge of refrigerant & oil, integral refrigerant piping, electronic expansion
valve, electrical panel with controls duly wired, thermostatic control
corded/cordless remote controller supports for indoor units etc.

Type of Units: Ductable TFA Units

MAT- a 4 TR to 8 TR 1 No 5693
03808

Refrigerant Piping
261 ELEC- Supply, installation and testing of Refrigerant Piping consisting of copper
5.6.20 tubes of wall thickness 20G/22G inclusive of Suction Gas Piping &
Fittings, Liquid Line Piping & Fittings, with class "O" nitrile rubber
Insulation with finish as required. The piping to be mounted & supported
properly with suitable size of clamp, M.S. hanger, tray etc., as required at
site Makes: As per list of recommended brands.
The insulation shall be closed cell/cross linked elastomeric Nitrile rubber
of thickness 13/19 mm.
The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and
above 19.1 mm dia, the insulation thickness shall be 19 mm.

Page 120 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Testing of refrigerant piping and procedure shall be done as per
Manufacturer's recommendations
MAT- a 34.9 mm dia Rmt 1924
03809
MAT- b 28.6 mm dia Rmt 1757
03810
MAT- c 22.2 mm dia Rmt 1589
03811
MAT- d 19.1 mm dia Rmt 1423
03812
MAT- e 15.9 mm dia Rmt 1255
03813
MAT- f 12.7 mm dia Rmt 1088
03814
MAT- g 9.5 mm dia Rmt 803
03815
MAT- h 6.4 mm dia Rmt 703
03816
262 ELEC- Supply, installation, and testing of UPVC Drain Piping with 6mm Nitrile
5.6.21 Rubber class "O" Insulation covered with interwoven glass cloth
protection. Necessary pipe fittings (including enlarger, bends, T-
Joints etc) has to be considered to connect the UPVC drain pipe to
cast iron floor trap.
MAT- a 25 mm dia Rmt 188
03817
MAT- b 32 mm dia Rmt 224
03818
MAT- c 40mm dia Rmt 274
03819
MAT- d 50 mm dia Rmt 324
03820
Supply of PVC insulated 2 core 1.5 Sq mm sheathed Rmt
flexible copper cable for voltage up to 1100V as per
IS 694/1990. (Covered in Section -1)

Page 121 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
263 MAT- ELEC- Supply and transportation of R 410A Gas for the kg 1309
03821 5.6.22 system.

264 MAT- ELEC- Providing Pressure testing of entire system with HP 1582
03822 5.6.23 Nitrogen and vacuuming nitrogen for all indoor and
outdoor units. The pressure testing shall be done as
per OEM recommendation.
265 MAT- ELEC- Supply, installation, testing & commissioning of No 93610
03823 5.6.24 stand-alone, intelligent Touch controller with
Display for controlling the indoor & outdoor units
from a Remote place for all the circuits.
266 ELEC- Supply, installation, testing& commissioning of GSS Ducting with required
5.6.25 angle flanges & installation materials such as heavy duty supports by
anchor fasteners etc as required asper IS 655 /SMACNA Standards.
Makes: As per list of recommended brands.
MAT- a 24 G sqm 1044
03824
MAT- b 22 G sqm 1170
03825
MAT- c 20 G sqm 1392
03826
MAT- d 18 G sqm 1518
03827
Thermal Insulation
267 MAT- ELEC- Supply &Fixing of Duct Thermal Insulation applied outside of the duct
03828 5.6.26 work with All. backed Closed cell nitrile/ Cross linked foam duly fixed with
adhesive and tapes.
13 mm Thick sqm 734
Acoustic Insulation
268 ELEC- Supply & Fixing of Duct Acoustic Insulation applied inside of the duct
5.6.27 work with All. backed Open cell nitrile duly fixed with adhesive and tapes

MAT- a 10/15 mm Thick sqm 1139

03829
269 MAT- ELEC- Supply, Installation, Testing and commissioning of sqm 10753
03830 5.6.28 extruded Aluminum powder coated grills/ diffusers
for supply with removable core type with collar
Page 122 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
damper

270 MAT- ELEC- Supply, Installation, Testing and commissioning of sqm 7843
03831 5.6.29 extruded Aluminum powder coated grills/ diffusers
for return with removable core type without collar
damper
271 MAT- ELEC- Supply, Erection and Testing of GI Opposed blade sqm 6831
03832 5.6.30 Volume control dampers made out of 18G frame and
20G blades
272 MAT- ELEC- Supply, Erection of Fresh air louver with extruded sqm 5440
03833 5.6.31 aluminum grill with SS wire mesh and GI volume
control damper with 20 micron filters
273 MAT- ELEC- Supply and Installation of Underdeck Insulation with sqm 823
03834 5.6.32 50 mm thick EPS, 48 Kg/Cum density, factory
laminated faced aluminum foil covered with GI cross
wiring.
274 MAT- ELEC- Supply and Installation of GI Fusible link Fire sqm 8223
03835 5.6.33 dampers 500 mm long with sleeve as per UL 555
Standard, Minimum width of damper shall be 225
mm.
275 MAT- ELEC- Supply and Installation of GI backdraft dampers as sqm 6831
03836 5.6.34 per UL 555 Standard,
276 MAT- ELEC- Supply, installation and testing of Canvas connection each 2783
03837 5.6.35 for the Treated Fresh Air units to the duct
277 ELEC- Supply, erection, testing and commissioning of Fresh ONE 5500
5.6.36 air intake GI louvers with bird screen as per standard Sqmtr
specifications.

278 ELEC- Supply, Installation, Testing and commissioning of ONE 9657

5.6.37 extruded Aluminum powder coated grills/ diffusers Sqmtr
for supply air with removable core type with collar
damper
279 ELEC- Supply, Installation, Testing and commissioning of ONE 7044
5.6.38 extruded Aluminum powder coated grills/ diffusers Sq
for return air with removable core type without collar mtr
damper.
5.7 EVAPORATIVE AIR-COOLING SYSTEM
280 MAT- ELEC- Supply of single-phase evaporative air-cooling unit 1 No 132825
03838 5.7.1 with a capacity of 9000 CFM consisting cabinet and
Page 123 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
water tank made of polypropylene material, blower
water pump of 40W, single phase 1.20 KW motor
axial type fan with variable speed, 20 micron
filtration, noise level less than 78 dBA with auto
cleaning, humidity control and water lack protection
etc., complete.
Makes: As per list of recommended brands.
281 MAT- ELEC- Supply of Three phase evaporative air-cooling unit 1 No 227700
03839 5.7.2 with a capacity of 12000 - 15000 CFM consisting of
cabinet and water tank made of polypropylene
material, blower water pump of 40W, Three phase
3.0 KW motor axial type fan with 2 speed, 20 micron
filtration, noise level less than 78 dBA with auto
cleaning and water lack protection etc complete.
Makes: As per list of recommended brands.
282 MAT- ELEC- Supply and fixing of 13mm thick Nitrile insulation for 1 sft 69
03840 5.7.3 outdoor unit.
283 MAT- ELEC- Supply and fixing of 50mm thick glass wool of 24 kg 1 sft 74
03841 5.7.4 density with aluminum foil insulation for indoor duct.
284 MAT- ELEC- Supply and fixing of angular iron frame with 2 coats 1 No 6325
03842 5.7.5 of zinc chromate red oxide for installation of air-
cooling unit
285 MAT- ELEC- Installation and commissioning charges for air 1 No 4554
03843 5.7.6 cooling unit
5.8 STABILIZERS
286 ELEC- Supply of ………... 1-phase, automatic Electronic Voltage Stabilizer.
5.8.1 Makes: As per list of recommended brands as category I.
MAT- a 0.5 KVA 1 No 990
03844
MAT- b 1.0 KVA 1 No 1751
03845
MAT- c 3.0 KVA 1 No 2415
03846
MAT- d 4.0 KVA 1 No 2934
03847
MAT- e 5.0 KVA 1 No 3587
03848

Page 124 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
287 ELEC- Supply of ………... 1-phase automatic Electronic Voltage Stabilizer.
5.8.2 Makes: As per list of recommended brands as category II.
MAT- a 0.5 KVA 1 No 815
03849
MAT- b 1.0 KVA 1 No 1570
03850
MAT- c 3.0 KVA 1 No 2053
03851
MAT- d 4.0 KVA 1 No 2717
03852
MAT- e 5.0 KVA 1 No 3369
03853
5.9 REPAIRING OF FANS, COOLERS, PUMPS, MOTORS, FRIDGES AND
AIRCONDITIONERS
288 ELEC- Rewinding of ceiling fan motor (starting and running winding) including all
5.9.1 necessary material. The motor is to be wound taking no. of coils, turns
and pitch as it was originally wound with required size super enameled
wire with 'E' class insulation material and making connections etc. as
required. (New model ceiling fan)
MAT- a 900/1200 mm sweep 1 No 467
03854
MAT- b 1400 mm sweep 1 No 561
03855
289 MAT- ELEC- Charges for oiling, greasing, overhauling of ceiling 1 No 190
03856 5.9.2 fan, table fan, pedestal fan irrespective to the size of
fan including removing, refixing of fan from site and
testing etc. as required
290 MAT- ELEC- Providing and Replacement of ball bearing of ceiling/ 1 No 222
03857 5.9.3 exhaust fan as required. (NBC/ SKF)
291 MAT- ELEC- Providing and Replacement of Gun metal bush of 1 No 190
03858 5.9.4 ceiling/ exhaust/cooler fan/ as required
292 MAT- ELEC- Servicing and overhauling of 20" sweep desert 1 No 316
03859 5.9.5 cooler including oiling, greasing, painting of tank
from inside with rubber paint after properly
dismantling each assembly and refixing the same as
required.

Page 125 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
293 MAT- ELEC- Painting of desert cooler with two coats of rubber 1 No 569
03860 5.9.6 paint inside of water tank and two coat of synthetic
enameled paint on both side of cooler body, fan
body, grills etc. After cleaning with sandpaper,
complete in all respect as required
294 MAT- ELEC- Replacement of cooler pads (heavy) set of 3 no. of 1 No 190
03861 5.9.7 size 25" x 27"
295 MAT- ELEC- Supply and fixing of Brass float valve of weighing 1 No 253
03862 5.9.8 approx. 250 gm, 8" long rod, PVC ball of 4" dia. For
desert cooler as required.
296 MAT- ELEC- Supply and fixing of adjustable M.S. grill 20/22 1 No 455
03863 5.9.9 gauge of size approx. 24" x 26" including painting
etc. as required
297 MAT- ELEC- Spray painting of ceiling fan of size 900/1200/ 1400 1 No 222
03864 5.9.10 mm with two coats of white/ brown enameled paint
after cleaning with sandpaper. Filling etc. as
required.
298 ELEC- Rewinding of Heavy-duty Exhaust fan motor including all necessary
5.9.11 material, The motor is to be wound taking no. of coils, turns and pitch as
it was originally wound with required size super enameled wire with 'E'
class insulation material and making connections etc. as
required.
MAT- a 300/ 380 mm sweep 1 No 791
03865
MAT- b 450 mm sweep 1 No 935
03866
MAT- c 600 mm sweep 1 No 1581
03867
299 MAT- ELEC- Rewinding of 400 mm table fan/pedestal fan motor 1 No 504
03868 5.9.12 including all necessary material, the motor is to be
wound taking no. of coils, turns and pitch as it was
originally wound with required size super enameled
wire with 'E' class insulation material and making
connections etc. as required.
300 ELEC- Rewinding of single-phase motor of 1400 RPM 1 No
5.9.13 including all necessary material and of the same
characteristics as original with required size of super
enameled wire 'E' class insulation material and
testing etc. as required.

Page 126 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- a 0.5 H.P. To 1.00 H.P. 1 No 1050
03869
MAT- b 2.0 H.P 1 No 1725
03870
301 ELEC- Rewinding of three phase motor of 1400 to 2800 RPM including all
5.9.14 necessary material and of the same characteristics as original with
required size of super enameled wire 'E' class insulation material and
testing etc. as required.
MAT- a 3.0 H.P. 1 No 2550
03871

MAT- b 5.0 H.P. 1 No 3600

03872
MAT- c 7.5 H.P. 1 No 3900
03873
MAT- d 10.0 H.P 1 No 5250
03874
MAT- e 12.5 H.P 1 No 5550
03875
MAT- f 15.0 H.P 1 No 6750
03876
302 ELEC- Supply and charging of fresh refrigerant and testing of
5.9.15 performance of air conditioner/ fridge/ water cooler of following capacity
including capillary and strainer/ filter.
MAT- a 1.0 TR Window/ Split A.C 1 No 2404
03877
MAT- b 1.5 TR Window/ Split A.C 1 No 2657
03878
MAT- c 2.0 TR Window/ Split A.C 1 No 3163
03879
MAT- d 25/50 / 40/80 Ltr. Water cooler 1 No 2530
03880
MAT- e 60/120 Ltr. Water cooler 1 No 2910
03881
MAT- f 150/150 Ltr. Water cooler 1 No 3542
03882

Page 127 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- g 165 Ltr Refrigerator 1 No 1581
03883
MAT- h 200/210 Ltr Refrigerator 1 No 2277
03884
MAT- i 286/310 Ltr Refrigerator 1 No 2657
03885
303 ELEC- Replacement of defective compressor by company repaired compressor
5.9.16 of fridge/water cooler including testing etc. as required.
Makes: As per list of recommended brands.
MAT- a 25/50 / 40/80 Ltr. Water cooler 1 No 7590
03886
MAT- b 60/120 Ltr. Water cooler 1 No 9614
03887
MAT- c 150/150 Ltr. Water cooler 1 No 11385
03888
MAT- d 165 Ltr Refrigerator) 1 No 3922
03889
MAT- e 200/210 Ltr Refrigerator 1 No 4807
03890
MAT- f 286/310 Ltr Refrigerator 1 No 5440
03891
304 ELEC- Supply of ……… brand new Rotary type sealed compressor for Air
5.9.17 conditioner
Makes: As per list of recommended brands.
MAT- a 1.0/1.5 TR 1 No 11495
03892
MAT- b 2 TR 1 No 12645
03893
305 ELEC- Replacement of condensing/ cooling coil of copper fins for following
5.9.18 capacity A.C./ Water cooler/ Fridge as required

MAT- a 1.0 TR A.C. 1 No 4510

03894
MAT- b 1.5 TR A.C. 1 No 5092
03895
MAT- c 2.0 TR A.C. 1 No 5674

Page 128 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03896
MAT- d 25/50 / 40/80 Ltr. Water cooler 1 No 3036
03897
MAT- e 60/120 Ltr. Water cooler 1 No 4428
03898
MAT- f 150/150 Ltr. Water cooler 1 No 4428
03899
MAT- g 165 Ltr Refrigerator 1 No 1392
03900
MAT- h 200/210 Ltr Refrigerator 1 No 1518
03901
MAT- i 286/310 Ltr Refrigerator 1 No 1961
03902
306 MAT- ELEC- Replacement of overload protection of A.C./ Water 1 No 633
03903 5.9.19 cooler as required
307 MAT- ELEC- Replacement of thermostat of A.C./ Water 1 No 569
03904 5.9.20 cooler/fridge as required.
308 MAT- ELEC- Replacement of starting relay of A.C/water 1 No 620
03905 5.9.21 cooler/fridge compressor as required
309 MAT- ELEC- Spray painting of complete fridge (inside and 1 No 2024
03906 5.9.22 outside) of 165/ 200/286/310 Ltr. Capacity
310 ELEC- Supply and fixing of 230V/ 275V, 50Hz rating ……….
5.9.23
Starting capacitor
MAT- a 20-60 micro farad 1 No 242
03907
MAT- b 80-150 micro farad 1 No 484
03908
Running capacitor 1 No
MAT- a 2.5/3.15/4.0/6.0 micro farad 1 No 91
03909
MAT- b 8.0 micro farad 1 No 133
03910
MAT- c 10.0 micro farad 1 No 182
03911
Page 129 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- d 15.0 to 36.0 micro farad 1 No 481
03912
311 MAT- ELEC- Supply, Fabrication of 1set MS bracket suitable for 1 Set 1452
03913 5.9.24 fixing outdoor unit of split AC unit.

312 ELEC- Providing 2 runs of Copper tubes for suction and liquid between indoor
5.9.25 and outdoor unit for Split/Cassette Air- Conditioner including foaming
etc., complete.
Makes: As per list of recommended brands.

MAT- a 1/2" x 1/4" 1 Mtr 1127

03914
MAT- b 5/8" x 1/4" 1 Mtr 1239
03915
MAT- c 3/4" x 3/8" 1 Mtr 1357
03916
MAT- d 7/8" x 1/2" 1 Mtr 1531
03917
MAT- e 1 1/8" x 5/8" 1 Mtr 1879
03918
313 MAT- ELEC- Multi speed Fan Motor suitable for 1.0 / 1.5 / 2.0 Ton 1 No 1803
03919 5.9.26 Window A.C. Unit
Makes: As per list of recommended brands.
314 MAT- ELEC- Air filter suitable for 1.50 Ton Window A.C. Unit 1 No 303
03920 5.9.27 P.V.C. / NYLON.
315 MAT- ELEC- Air filter suitable for 1.50 Ton Split A.C. Unit 1 No 520
03921 5.9.28 P.V.C. / NYLON.
316 MAT- ELEC- Fan blade for 1.0 / 1.5 Ton A.C. Machine. 1 No 605
03922 5.9.29
317 MAT- ELEC- Installation of Split Air Conditioners. 1 No 2200
03923 5.9.30
318 MAT- ELEC- Removing of existing Split Air Conditioners 1 No 726
03924 5.9.31 without damaging to copper pipe.
319 MAT- ELEC- Installation of Cassette type Split Air Conditioners. 1 No 5500
03925 5.9.32
320 MAT- ELEC- Installation of Tower type Split Air Conditioners. 1 No 4125
03926 5.9.33
Page 130 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
321 MAT- ELEC- Supply, Fabrication of 1set MS bracket suitable for 1 Set 2057
03927 5.9.34 fixing outdoor unit of 3.5 /4.50 TR Cassette AC unit.
322 LAB- ELEC- Repairs and Installation of existing PCB in 1.0 / 1.5 / 1 No 858
01181 5.9.35 2.0 Ton Split A.C. Unit
323 LAB- ELEC- Overhauling and servicing the Split type 1.5/2.0 Ton 1 Job 759
01182 5.9.36 A.C. Machine by Cleaning the condenser cooling
Coil etc., by blower and oiling the Fan Motor and
Cleaning all parts and putting the machine in working
condition.
324 LAB- ELEC- Overhauling and servicing the Cassette type 1 Job 1030
01183 5.9.37 1.5/2.0/3.5/4.0 Ton A.C. Machine by Cleaning the
condenser cooling Coil etc., by blower and oiling the
Fan Motor and Cleaning all parts and putting the
machine in working condition.
325 ELEC- Supply, Transportation, Installation, Testing and
5.9.38 Commissioning of the following actual capacity at
45°C ambient Outdoor Condensing Units-Inverter
type suitable to operate upto 52°C ambient
temperature with minimum one variable speed
inverter scroll compressor. Matching air-cooled
condenser with copper tubes and aluminum fins duly
covered by anti-corrosion and hydrophilic resin film.
Scroll compressors suitable for operation with R-
410A. Unit with all necessary safety devices like
high/low pressure cut-outs, fan motor thermal
overload protector, over current/low current safety,
fuses etc. Suitable for operation on 80V~415V,
3Ph~50Hz A.C. supply. Oil separator and
accumulator to be provided for inverter compressors
and with copper condensing units.
Makes: As per list of recommended brands.
a 2.5 TR 1 No 55000

b 3.5 TR 1 No 83000

c 5.5 TR 1 No 85400

d 8.5 TR 1 No 122000

Page 131 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
e 11 TR 1 No 146000

f 17 TR 1 No 239000

AIR HANDLING UNITS

326 ELEC- Supply, Installation, Testing and Commissioning of

5.10.1 double skin horizontal floor mounted air handling unit
of recirculation type having mixing box with fresh air
& return air manually operated AL dampers. Fresh
air inlet should have back draft dampers along with
AL manually operated fresh air dampers. Units shall
be with a minimum of 80mm GI base channel. The
panel thickness should be 46+/-2mm having thermal
break AL profile. Outer skin of the unit should be
0.6mm pre-coated GI sheet & Inner skin should be
0.8mm AL. All internal blank off should be GI. Filter
section with 90% efficiency down to 10-micron pre-
filter box type followed by 95% efficiency down to 5-
micron Microvee filter in a separate filter frame. The
cooling coil section should be 6 or 8 Row Deep
Direct Expansion intertwining cooling coil compatible
for Mitsubishi /DAIKIN/Toshiba/O General/ Blue
star/Hitachi/Carrier outdoor unit. Fin thickness
should be 0.15mm & fin spacing should be 12 FPI.
Coil casing should be GI & fin shall be with standard
fin material. Coil shall be 18G SS-304 drain pan with
13mm thick closed cell nitrile rubber insulations.
Unit shall be ultraviolet lamp to kill germs/fungus.
The heater section should be with 4kW electric strip
heater in 2 banks. The fan section should be SISW
direct driven plug fan with a minimum efficiency of
65%. Motors should be IE-2, TEFC squirrel cage
induction type with IP-55 protection, 415V, 3Phase
& 50Hz. The motor drive should be VFD. VFD drive
should be included in AHU supply. Fan should be
housed over the spring isolator. Units should be
supplied with manually operated AL dampers. The
AHU package should include Electronic expansion
valves compatible to condensing units, Temperature
sensor and controller compatible to inverter drive,
communication cables from AHU to condensing unit
etc., including cost of all accessories and all labour

Page 132 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
charges, transportation etc., complete.
Makes: As per list of recommended brands.
1000 cfm 2.5" static Each 74750

1400 cfm 2.5" static Each 86250

2200 cfm 3.5" static Each 132250

3400 cfm 4.5" static Each 212750

4400 cfm 4.5" static Each 258750

6800 cfm 4.5" static Each 385250

8800 cfm 5.5" static Each 442750

327 ELEC- Supply, installation, testing and commissioning of

5.10.2 tube axial flow type Supply Air Fan of suitable
capacity ……WC static pressure with powder coated
MS/GSS casing and aluminum alloy impellers with
high efficiency aero-foil sections, blades, the impeller
directly driven by TEFC induction motor (IE-2) and
‘F’ class insulation suitable for 3 Phase, 50 Hz,
415±10% Volt, ac supply (and as per manufacturer
specification) for a static pressure as indicated
below. Fan section shall be suitable for Floor
Mounted outdoor application as well as ceiling
suspended indoor applications with suitable capacity
of starter with Four Pole MCB etc., and other
protective devices of approved brands within MS
enclosure box complete as required and as per
specifications. The fan shall be equipped with
mounting bracket Inlet & outlet cone required at
discharge. The sound pressure should not exceed
80 db(A) at a distance of 3 Mts. The Fan should be
complete with all accessories including fire rated
canvas connection with metallic flange, vibration
isolators, gravity louvers, bird screen etc., as per
specification including transportation to site, all
mounting arrangements like brackets etc., and cost
of all accessories and all labour charges complete.
Page 133 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Fan total efficiency should not be less than 60%.
Makes: As per list of recommended brands.
a 1500 CFM/ 20mm Each 17419

b 2500 CFM/ 20mm Each 19441

c 3000 CFM/ 20mm Each 19441

d 3500 CFM/ 20mm Each 21656

e 4000 CFM/ 20mm Each 24411

f 5000 CFM/ 20mm Each 27910

g 5500 CFM/ 20mm Each 25997

h 6500 CFM/ 35mm Each 30995

i 9500 CFM/ 20mm Each 36103

j 11500 CFM/ 35mm Each 41593

k 12000 CFM/ 35mm Each 41593

l 16000 CFM/ 35mm Each 56406

328 ELEC- Supply, installation, testing and commissioning of

5.10.3 tube axial flow type Fire rated Exhaust Air Fan of
suitable capacity …….. WC static pressure with
powder coated MS/ GSS casing and aluminum alloy
impellers with high efficiency aero-foil sections,
blades, the impeller directly driven by TEFC
induction motor (IE-2) and 'H' class insulation
suitable for 3 Phase, 50 Hz, 415±10% Volt, ac
supply, (and as per manufacturer specification ) for a
static pressure as indicated below. Fan section shall
be suitable for Floor Mounted outdoor application as
well as ceiling suspended indoor applications with
suitable capacity of starter with Four Pole MCB etc.,
Page 134 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
and other protective devices of approved brands
within MS enclosure box complete as required and
as per specifications. The fan shall be equipped with
mounting bracket Inlet & outlet cone required at
discharge. Fans should be AMCA certified. The
sound pressure should not exceed 80 db(A) at a
distance of 3 Mts. Fan and Motor for Fire exhaust
fans shall be suitable for operation at minimum 250
deg C for 2 hrs. The Fan should be complete with all
accessories including fire rated canvas connection
with metallic flange, vibration isolators, gravity
louvers, bird screen etc., as per specification
including transportation to site, all mounting
arrangements like brackets etc., and cost of all
accessories and all labour charges complete. Fan
total efficiency should not be less than 60%.
Makes: As per list of recommended brands.
a 2500 CFM/ 20mm Each 22736

b 3000 CFM/ 20mm Each 21990

c 3500 CFM/ 20mm Each 24759

d 4000 CFM/ 20mm Each 24759

e 5000 CFM/ 20mm Each 29858

f 5500 CFM/ 20mm Each 29858

g 16000 CFM/ 35mm Each 64949

h 19000 CFM/ 25mm Each 65799

329 ELEC- Supplying, installing, testing and commissioning of

5.10.4 low noise silent type ……. ESP Inline Fan. The
motor shall be suitable for 220-volt single phase 50
cycles AC supply, 6/15 Amp plug and wiring
between the fan and the socket and low sound level
exceeding not more than 50dBA. Fan should be
complete with all accessories including canvas

Page 135 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
connection, gravity louver/ shutter as required etc.,
as per manufacturer specification including
transportation to site, all mounting arrangements like
brackets etc., as per specification including
transportation to site, all mounting arrangements like
brackets etc., and cost of all accessories and all
labour charges complete.
Makes: As per list of recommended brands.
a 100 CFM / 3-5 mm Each 4386

b 150 CFM / 3-5 mm Each 4627

c 200 CFM / 5 mm Each 4723

d 300 CFM / 5 mm Each 5639

e 400 CFM / 5 mm Each 7046

f 450 CFM / 5 mm Each 5976

g 500 CFM / 5 mm Each 7229

h 600 CFM / 8 mm Each 8868

I 800 CFM / 8 mm Each 10121

J 1000 CFM / 8 mm Each 11133

K 1300 CFM / 10 mm Each 12483

330 ELEC- Supplying, installing, testing and commissioning of

5.10.5 ………SP-For Fresh Air Cabinet FAN SECTION -
DIDW of double skin construction as per
specifications, each complete with squirrel cage
induction motor (mounted internally), centrifugal fan
belt drive and vibrations isolators, base, drive
arrangement, flexible canvass connection inside and
for duct connection and all other accessories as
required and as called for in the drawings. Motors
Page 136 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
shall be suitable for 415 ± 10% volts, 50 cycles, 3
phase or 220-volt single phase 50 cycles AC supply
(as per manufacturer specification) for a static
pressure as indicated. In addition, all supply fans
(SF) shall be provided with 50mm thick prefilter. Fan
section shall be suitable for Floor Mounted outdoor
application as well as ceiling suspended indoor
applications with suitable capacity of starter with
Four Pole MCB etc., and other protective devices of
approved brands within MS enclosure etc., as per
specification including transportation to site, all
mounting arrangements like brackets etc., and cost
of all accessories and all labour charges complete.
Makes: As per list of recommended brands.
a 15000 CFM / 30mm Each 87233

b 25000 CFM / 30mm Each 304882

331 ELEC- Supply, Installation, Testing and Commissioning of

5.10.6 Electrostatic Type Kitchen Exhaust Air Cleaner (Dry
Scrubber) complete with the following accessories,
components etc. Making it a completely functional
dry scrubber suitable for Kitchen Hood Exhaust. The
component to be included are:-
Fan Section:-Double skin floor mounted cabinet fan
section for exhaust air made of 25 ± 2 mm thick
panel consisting of pre painted GSS sheet of
thickness 0.8mm outside layer and 0.63 mm inside
layer with polyurethane foam (PUF) insulation of
density 40 kg/m3 factory injected between them by
injection moulding machine, complete with SISW
backward curved centrifugal fan suitable for static
pressure as required with TEFC induction motor (IP
55 protection) should be of high efficiency class IE3
suitable for 3 Phase 50 Hz 415V ± 10 %, of Class F
insulation, internal fire rated flexible connection with
flanges, fire rated connection for duct/ dry scrubber,
gravity louver, vibration isolator etc. including all
accessories complete as required and as per
specifications. Motor and drive shall be out of hot air
stream and shall be protected with GI
covering/weatherproof canopy. Pre Filter-Section
with Wire Mesh SS Filters for Coarse Particle.
Page 137 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Electrostatic Precipitator Section - Electrostatic
section shall be made of 16 SWG galvanised sheet,
high bake epoxy powder coated, SS Spiked ionizers
to create high voltage DC field, aluminum collector
plates which should be alternatively charged positive
and negative with large collecting area with deep
cell, to work as magnet for charged smoke and oil
particles. Average efficiency of 90-95% in single
pass as per ASHRAE/DOP test method.
Electrostatic Precipitator should be able to charge
particles from 0.01 micron to 10 microns through
solid state power supply. Collector cell should be of
permanent type and incorporate slide out facility for
easy removal for cleaning. Power supplies shall be
100% solid state. Suitable capacity of starter with
Four Pole MCB etc., and other protective devices of
approved brands and other protective devices within
M.S enclosure box with suitable length of cable for
connection with fan from isolator complete as
required and as per specifications. Fan should be
complete with all accessories including canvas
connection, vibration isolators etc., as per
specification including transportation to site, all
mounting arrangements like brackets etc., and cost
of all accessories and all labour charges complete.
Makes: As per list of recommended brands.
a 18000 CFM / 65mm Each 373016

b 30000 CFM / 65mm Each 679370

332 ELEC- Supplying, installing, testing, and commissioning of

5.10.7 150 mm dia low noise direct driven wall mounted
PROPELLER FAN. Each fan shall be complete with
permanent split capacitor or shaded pole motor,
mounting plate with light weight type PVC /aluminum
impellers with aero foil contours for high efficiency &
finished with decorative frames & gravity shutter/ bird
screen at discharge as required. The motor shall be
suitable for 220 volt single phase 50 cycles AC
supply, 6/15 Amp plug and wiring between the fan
and the socket etc., as per specification including
transportation to site, all mounting arrangements like
brackets etc., and cost of all accessories and all
Page 138 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
labour charges complete.
Makes: As per list of recommended brands.
a 150 mm dia Each 1957

b 300 mm dia Each 2699

333 ELEC- Supply, Transportation, Installation, Testing and Each 275000

5.10.8 Commissioning of Ceiling suspended laminar flow
(Planair Ceiling system) with unidirectional airflow
work space / discharge plenum for operation rooms
comprising as standard feature with HEPA filter
efficiency not less than 99.97% down to 0.3 Microns
(Factory DOP tested), per operation room shall not
be less than 3.1 sqm area with appropriate depth to
accommodate absolute filters, with air flow at
approx. 90-100 Fpm velocity. Size 8ft X 6ft. The
laminar flow system shall have such design that it
provides "H13/14” class Hepa filter. Material of
construction Shall be 1.2mm thick S S 304 Plenum
with S S Perforated sheet at the bottom. Each air
inlet should be supplied with Aluminum opposed
blade damper. Diffuser: 2 layer monofilament
precision woven polyester of uniform porosity with an
open area of sufficient resistance to create laminar
from diffusers face and integral lighting provides an
illumination level in excess of 1500 Lux in operating
area and 1000 Lux other electronic stepless dimming
down to 5% without flicker. The entire plenum should
be insulated with 19mm thick Al faced nitrile rubber.
Bottom discharge should be perforated SS Sheet of
1.6mm with reinforcement to avoid waviness.
SECTION 6
6.1 SWAGED / OCTAGONAL POLES AND GARDEN POSTS

334 MAT- ELEC- Fabrication, supply and transportation of all sizes 1 Kg 88

03928 6.1.1 swaged poles up to site confirming to IS 2713 / 1980
specifications. The pole should be painted with
primary coat of red oxide and black bituminous paint
up to ground level with base plate, including cost of
all materials etc., complete. (Rate per K. G)

Page 139 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
335 MAT- ELEC- Fabrication and Supply of M.S. Poles for garden 1 Kg 79
03929 6.1.2 posts with 'B' class 60.25mm outer dia with base
plate and suitable pole cap including cost and
conveyance of all material including fixing of
luminaire and labour charges etc., complete. (Rate
per K. G)
336 MAT- ELEC- Supply of different sizes of M. S. Pipe brackets (Rate 1 Kg 79
03930 6.1.3 per K.G)
OCTOGONAL POLEs
337 MAT- ELEC- Fabrication, Transportation and supply of hot-dip 1 No 13842
03931 6.1.4 galvanized Octagonal Pole with BSEN - 10025 grade
S 355 JO steel plate for shaft, IS 2062 for base plate
with hinged door opening arrangement, including the
supply of suitable boards with bakelite sheet as per
IS specification suitable to withstand the wind speed
of 180 KMPH for 7.5 Mtrs height Pole having
dimensions Bottom 130 mm,. Top 70mm with 3mm
thick, base plate 220 x 220 x 12mm and 4 Nos of
M20 x 700 long 'J' bolts along with template.
Makes: As per list of recommended brands.
338 MAT- ELEC- Fabrication, Transportation and supply of hot-dip 1 No 20009
03932 6.1.5 galvanized Octogonal Pole with BSEN - 10025 grade
S 355 JO steel plate for shaft, IS 2062 for base plate
with Hinged door opening arrangement, including the
supply of suitable boards with bakelite sheet as per
IS specification suitable to withstand the wind speed
of 180 KMPH for 9 Mtrs height Pole having
dimensions Bottom 155 mm,. Top 70mm with 3mm
thick, base plate 260 x 260 x 16mm and 4 Nos of
M24 x 750 long 'J' bolts along with template.
Makes: As per list of recommended brands.

339 MAT- ELEC- Fabrication, Transportation and supply of hot-dip 1 No 21998

03933 6.1.6 galvanized Octagonal Pole with BSEN - 10025 grade
S 355 JO steel plate for shaft, IS 2062 for base plate
with hinged door opening arrangement, including the
supply of suitable boards with bakelite sheet as per
IS specification suitable to withstand the wind speed
of 180 KMPH for 10 Mtrs height Pole having
dimensions Bottom 175 mm,. Top 70mm with 3mm
thick, base plate 275 x 275 x16mm and 4 Nos of
M24 x 750 long 'J' bolts along with template.
Page 140 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Makes: As per list of recommended brands.

340 MAT- ELEC- Fabrication, Transportation and supply of hot-dip 1 No 31779

03934 6.1.7 galvanized Octagonal Pole with BSEN - 10025 grade
S 355 JO steel plate for shaft, IS 2062 for base plate
with door opening arrangement, including the supply
of suitable boards with bakelite sheet as per IS
specification suitable to withstand the wind speed of
180 KMPH for 12 mtrs height Pole having
dimensions Bottom 240mm, Top 100mm with 4mm
thick, base plate 320 x320 x20mm and 4 Nos of M24
x 850 long 'J' bolts along with template.
Makes: As per list of recommended brands.

DECORATIVE DRAGON TYPE BRACKET WITH POLE

341 ELEC- Fabrication, Transportation and supply of hot-dip galvanized Octagonal

6.1.8 Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for
base plate with door opening arrangement, including the supply of
suitable boards with bakelite sheet and MCB's as per IS specification
suitable to withstand the wind speed of 180KMPH for 9 Mtrs mounting
height Pole having dimensions bottom 185 mm,. Top 70mm with 3mm
thick, base plate 275 x 275 x 20mm and 4 Nos of M24 x 1000 long 'J'
bolts along with templates. Including Supply of1.5M Dragon type
decorative.
Makes: As per list of recommended brands.
MAT- a galvanized double arm with PU Painted bracket. 1 No 31308
03935
MAT- b galvanized Single arm with PU Painted bracket. 1 No 26836
03936
MAT- c Double arm Galvanize finished bracket 1 No 26483
05544
MAT- d Single arm Galvanize finished bracket 1 No 24011
05545
342 ELEC- Fabrication, Transportation and supply of hot-dip 1 No DELETE
6.1.9 galvanized Octagonal Pole with BSEN - 10025 grade D
S 355 JO steel plate for shaft, IS 2062 for base plate
with door opening arrangement, including the supply
of suitable boards with bakelite sheet and MCB's as
per IS specification suitable to withstand the wind
speed of 180 KMPH for 9 Mtrs Mounting height
Page 141 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Pole having dimensions Bottom 185 mm,. Top
70mm with 3mm thick, base plate 275 x 275 x 20mm
and 4 Nos of M24 x 1000long 'J' bolts along with
templates. Including Supply of 1.5M Dragon type
decorative
343 ELEC- Fabrication, Transportation and supply of hot-dip ..................PU Paint
6.1.10 finish curved Octagonal Pole with BSEN - 10025 grade S 355 JO steel
plate for shaft, IS 2062 for base plate with door opening arrangement,
including the supply of suitable boards with bakelite sheet and MCB's as
per IS specification suitable to withstand the wind speed of 180 KMPH for
9 Mtrs mounting height Curved Pole having dimensions Bottom 180
mm,. Top 85mm with 3mm thick, base plate 400 x 400 x 20mm and 4
Nos of M24 x 750 long 'J' bolts along with templates. Including Supply of
0.2M long Single arm bracket.
Makes: As per list of recommended brands.
MAT- a Galvanized 1 No 26247
03937
MAT- b Galvanized PU paint finished 1 No 35545
05546

POLE BRACKETS
344 MAT- ELEC- Fabrication, Transportation and supply of 1.0 Mtr 1 No 1530
03938 6.1.11 Length Single Arm Bracket made with MS
galvanized 40mm / 50mm dia Pipe.
(The design should be approved from field
Engineers)
345 MAT- ELEC- Fabrication, Transportation and supply of 1.50 Mtr 1 No 2024
03939 6.1.12 Length Single Arm Bracket made with MS
galvanized 40mm / 50mm dia Pipe.
(The design should be approved from field
Engineers).
346 MAT- ELEC- Fabrication, Transportation and supply of 1 Mtr 1 No 1895
03940 6.1.13 length Double Arm Bracket made with MS
galvanized 40mm / 50mm dia Pipe.
(The design should be approved from field
Engineers).
347 ELEC- Fabrication, Transportation and supply of 1.5 Mtr 1 No 3413
6.1.14 length Double Arm Bracket made with MS
galvanized 40mm / 50mm dia Pipe.
(The design should be approved from field

Page 142 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Engineers)
348 MAT- ELEC- Fabrication, Transportation and supply of 1.5 Mtr 1 No 5650
03942 6.1.15 Length Single Arm suitable size decorative
galvanized bracket with PU paint colour finish etc
complete. (The design should be approved from field
Engineers)
349 MAT- ELEC- Fabrication, Transportation and supply of 1.5 Mtr 1 No 10711
03943 6.1.16 length double arm suitable size decorative
galvanized bracket with PU paint colour finish etc
complete. (The design should be approved from field
Engineers)
350 MAT- ELEC- Fabrication, Transportation and supply of 1.5mtrs 1 No 6238
03944 6.1.17 sword type or any decorative double arm bracket
with dooms either side complete with all accessories
with MS galvanized 40mm / 50mm dia Pipe.
(The design should be approved from field
Engineers)
351 MAT- ELEC- Fabrication, Transportation and supply of 1.5mtrs 1 No 4826
03945 6.1.18 sword type or any decorative Single arm bracket with
dooms either side complete with all accessories with
MS galvanized 40mm / 50mm dia Pipe.
(The design should be approved from field
Engineers)
352 MAT- ELEC- Fabrication, Transportation and supply of 1.0mtrs 1 No 5061
03946 6.1.19 sword type or any decorative double arm bracket
with dooms either side complete with all accessories
with MS galvanized 40mm / 50mm dia Pipe.
(The design should be approved from field
Engineers)
353 MAT- ELEC- Fabrication, Transportation and supply of 1.0 mtrs 1 No 4237
03947 6.1.20 sword type or any decorative Single arm bracket with
dooms either side complete with all accessories with
MS galvanized 40mm / 50mm dia Pipe.
(The design should be approved from field
Engineers)
HIGH MAST POLES

Page 143 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
354 MAT- ELEC- Fabrication, transportation and supply of 12 Mtrs 1 No 123585
03948 6.1.21 Polygon High Mast with single section of 3mm thick
of bottom 360mm and top 150mm dia with BSEN -
10025 grade S 355 JO steel plate for shaft, IS 2062
for base plate, having a base plate of size 520mm
dia 16mm thick with its accessories. Mast shall be in
single section for 12 Mtrs and 2 sections for 16 and
20 Mtrs. Mast shall be hot dip galvanized and
suitable for wind velocity of 180 KMPH as per IS 875
part 3 including head frame, 2 point suspension
system with steel rope 6mm dia (7/19) construction
double drum winch / power tool operating speed of
900 RPM, and necessary cable trailer connections
and single speed motor with M24 x 800 mm
foundation bolts of required quantity, and GI Pipe
ring suitable for fixing luminaires with LED type
aviation twin lamp.
Makes: As per list of recommended brands.
355 MAT- ELEC- Fabrication, transportation and supply of 16 Mtrs 1 No 162426
03949 6.1.22 Polygon High Mast with two sections of bottom 4mm
thick and top section with 3mm thick with GLS type
aviation lamp of Bottom 360mm and Top 150mm dia
with BSEN - 10025 grade S 355 JO steel plate for
shaft, IS 2062 for base plate, having a base plate of
size 560mm dia 25mm thick with its accessories.
Mast shall be in single section for 12 Mtrs and 2
sections for 16 and 20 Mtrs. Mast shall be hot dip
galvanized and suitable for wind velocity of 180
KMPH as per IS 875 part 3 including head frame, 2
point suspension system with steel rope 6mm dia
(7/19) construction double drum winch / power tool
operating speed of 900 RPM, and necessary cable
trailer connections and single speed motor with
M24 x 800 mm foundation bolts of required quantity
and GI Pipe ring suitable for fixing luminaires with
LED type aviation twin lamp. Makes: As per list of
recommended brands.

Page 144 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
356 MAT- ELEC- Fabrication, transportation and supply of 20 Mtrs 1 No 210095
03950 6.1.23 Polygon High Mast with two sections of bottom 4mm
thick and top section with 3mm thick of bottom
460mm and top 150mm dia with BSEN - 10025
grade S 355 JO steel plate for shaft, IS 2062 for
base plate, having a base plate of size 670mm dia
25mm thick with its accessories. Mast shall be in
single section for 12 Mtrs and 2 sections for 16 and
20 Mtrs. Mast shall be hot dip galvanized and
suitable for wind velocity of 180 KMPH as per IS 875
part 3 including head frame, 2 point suspension
system with steel rope 6mm dia (7/19) construction
double drum winch / power tool operating speed of
900 RPM, and necessary cable trailer connections
and single speed motor with M30 x 750 mm
foundation bolts of required quantity and GI Pipe ring
suitable for fixing luminaires with LED type aviation
twin lamp.
Makes: As per list of recommended brands.
FEEDER PILLAR BOXES
357 MAT- ELEC- Supply and fixing of suitable outdoor type feeder 1 No 21539
03951 6.1.24 pillar box made with 14 SWG CRCA sheet after 7
tank process including S & F 40-63A FP MCB, 6 Nos
SP MCB's, din channel, bus bars, 6 Sq mm 3 core
copper cable for internal wiring, contactor,
connectors and provision for energy meter etc.,
complete for finished item of work.
Makes: As per list of recommended brands.
358 MAT- ELEC- Supply and fixing of suitable outdoor type feeder 1 No 22245
03952 6.1.25 pillar box made with 14 SWG CRCA sheet after 7
tank process including S & F 40-63A FP MCB, 9 Nos
SP MCB's, din channel, bus bars, 6 Sq mm 3 core
copper cable for internal wiring, contactor,
connectors and provision for energy meter etc.,
complete for finished item of work.
Makes: As per list of recommended brands.
ERRECTION- HIGH MAST POLES

Page 145 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
359 MAT- ELEC- Earth work excavation with an approximate quantity 1 No 33739
03953 6.1.26 of 4.0 Cum for erection of 12 Mtrs high mast and
refilling with a quantity of 0.53 Cum of PCC 1:4:8,
1.50 Cum M 20 grade concrete and (80 Kgs)
reinforced steel of 12mm / 10mm / 8mm, Soil
bearing capacity of 10 T/Sqm, Anchor plate with cost
and conveyance of all above materials including
labour charges for erection of High Mast and
carriage etc complete.
360 MAT- ELEC- Earth work excavation with an approximate quantity 1 No 42174
03954 6.1.27 of 6.0 Cum for erection of 16 Mtrs high mast and
refilling with a quantity of 0.65 Cum of PCC 1:4:8,
2.60 Cum M 20 grade concrete and (110 Kgs)
reinforced steel of 12mm / 10mm / 8mm, Soil
bearing capacity of 10 T/Sqm, Anchor plate with cost
and conveyance of all above materials including
labour charges for erection of High Mast and
carriage etc complete.
361 MAT- ELEC- Earth work excavation with an approximate quantity 1 No 54173
03955 6.1.28 of 7.0 Cum for erection of 20 Mtrs high mast and
refilling with a quantity of 0.75 Cum of PCC 1:4:8,
3.60 Cum M20 grade concrete and (140 Kgs)
reinforced steel of 12mm / 10mm / 8mm, Soil
bearing capacity of 10 T/Sqm, Anchor plate with cost
and conveyance of all above materials including
labour charges for erection of High Mast and
carriage etc complete.
362 ELEC- Supply of ……. Sizes thermo-plastic cable junction boxes with IP66/67
6.1.29 weatherproof, for outdoor installation with knockouts for cable entry
including terminals etc., complete (sizes in mm).
Makes: As per list of recommended brands.
MAT- a 155 X 210 X 92 1 No 1893
03956
MAT- b 205 X 255 X112 1 No 2754
03957
MAT- c 225 X 295 X 122 1 No 9695
03958
MAT- d 255 X 600 X 170 1 No 10670
03959

Page 146 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
FOUNDATION AND ERRECTION
CHARGES OF POLES
363 MAT- ELEC- Erection charges for 7.50 Mts long Octagonal pole 1 Job 4990
03960 6.1.30 on bridge kerb portion with 4 Nos, 8" Anchor bolts
with chemical treatment with suitable "J" type bolts
etc duly drilling holes to RCC slab with V.C.C. M.15
concrete for suitable base concreting with necessary
steel reinforcement work and curing for 7 days etc.
including cost and conveyance of all material and all
labour charges etc., complete as directed by the
department officers.
364 MAT- ELEC- Foundation and erection charges with special T&P, 1 Job 5821
03961 6.1.31 for 7.50 Mtrs long Octagonal /Conical pole duly
erecting on base plate duly providing 4 Nos
foundation bolts with nuts with providing of 0.45Mtr x
0.45Mtrs x1.20 Mtr size M20 cc work vibrated
concreting mixing with necessary steel (10kgs)
reinforcement and curing for 7 days as directed by
the field engineers during execution including
excavation of Earth/BT all labour charges and cost
and conveyance of materials etc., complete.
365 MAT- ELEC- Foundation and erection charges with special T&P, 1 Job 7841
03962 6.1.32 for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole
duly erecting on base plate duly providing 4 Nos
foundation bolts with nuts with providing of 0.60Mtr x
0.60Mtrs x 1.40 Mtr size M20 cc work vibrated
concreting mixing with necessary steel (15kgs)
reinforcement and curing for 7 days as directed by
the field engineers during execution including
excavation of Earth/BT all labour charges and
cost and conveyance of materials etc., complete.
366 MAT- ELEC- Foundation and erection charges with special T&P, 1 Job 9623
03963 6.1.33 for 12Mtrs long Octagonal /Conical pole duly
erecting on base plate duly providing 4 Nos
foundation bolts with nuts with providing of 0.67Mtr x
0.67Mtrs x 1.50 Mtr size M20 cc work vibrated
concreting mixing with necessary steel (20kgs)
reinforcement and curing for 7 days as directed by
the field engineers during execution including
excavation of Earth/BT all labour charges and cost
and conveyance of materials etc., complete.
GRP POLES
Page 147 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
367 ELEC- Supply and transportation of following glass reinforced polymer (GRP)
6.1.34 composite type Conical pole with single arm bracket of length 1Mtr and
internal junction box including labour charges etc., complete.
Makes: As per list of recommended brands.

MAT- a …do…. 3.00 Mtrs height, Bottom dia 143mm, Top 1 No 10005
03964 76mm, AV thickness 6mm and to withstand
maximum wind velocity 180Km/Hr
MAT- b …do…. 4.00 Mtrs height, Bottom dia 143mm, Top 1 No 12712
03965 76mm, AV thickness 6mm and to withstand
maximum wind velocity 180Km/Hr
MAT- c …do…. 6.00 Mtrs height, Bottom dia 143mm, Top 1 No 15890
03966 76mm, AV thickness 6mm and to withstand
maximum wind velocity 180Km/Hr
MAT- d …do…. 8.00 Mtrs height, Bottom dia 193mm, Top 1 No 20480
03967 76mm, AV thickness 6mm and to withstand
maximum wind velocity 180Km/Hr
MAT- e …do…. 9.00 Mtrs height, Bottom dia 210mm, Top 1 No 22363
03968 76mm, AV thickness 6mm and to withstand
maximum wind velocity 180Km/Hr
MAT- f …do…. 10.00 Mtrs height, Bottom dia 227mm, Top 1 No 32368
03969 76mm, AV thickness 6mm and to withstand
maximum wind velocity 180Km/Hr
368 ELEC- Supply and transportation of base bracket suitable for glass reinforced
6.1.35 polymer (GRP) composite type pole including labour charges etc.,
complete.
Makes: As per list of recommended brands.
MAT- a …do…. For 3.00 Mtrs Pole 1 No 1824
03970
MAT- b …do…. For 4.00 Mtrs Pole 1 No 1824
03971
MAT- c …do…. For 6.00 Mtrs Pole 1 No 2177
03972
MAT- d …do…. For 8.00 Mtrs Pole 1 No 2531
03973

MAT- e …do…. For 9.00 Mtrs Pole 1 No 4826

03974

Page 148 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- f …do…. For 10.00 Mtrs Pole 1 No 6003
03975
6.2 LT PANEL AND ACCESSORIES
369 MAT- ELEC- Supply Installation Testing and commissioning of 1 sqm 5586
03976 6.2.1 free-standing floor mounted dust and vermin proof
compartmentalized cubical panel made out of CRCA
sheet, required hardware, cleaning with 7 tank
process duly painted by two coats of zinc/red oxide
primer followed by Powder coated / epoxy / PU
painted with phosphatisation in grey or required
shade after rinsing. The panel having PU/ Neoprene
rubber gasket of not less than 3mm thickness,
separate detachable, gland plate M.S. base channel,
hinged door with locking arrangement for
equipment/switchgear. The thickness of sheet shall
not be less than 1.6mm up to 600mm length/ width
of any compartment and be 2.0mm above 600mm.
The load bearing structure shall be of 2.0mm thick
sheet supported by base M.S. channel if required.
Side walls and cable alley compartments having
bolted type doors with detachable extension type
structure (only outer area on all sides shall be
measured and panel to be fabricated from CPRI
approved fabricator).
370 ELEC- Supply and fixing of……………. bus bar by means of SMC / DMC type
6.2.2 insulator, high tensile nuts and bolts spring washers in existing panel
including bending , cutting in required shape and size and colour coding
with heat shrinkable PVC sleeves

MAT- a Electrolytic grade aluminum bus bar kg 469

03977
MAT- b Electrolytic grade copper bus bar kg 990
03978
371 ELEC- Supply and fixing of (0-500) V range Voltmeter on existing panel, making
6.2.3 connection by PVC insulated copper conductor with PVC sleeves /
channel etc. as required.
Makes: As per list of recommended brands.
MAT- a Analog type (96 mm x 96 mm) 1 No 935
03979
MAT- b Digital type 1 No 2090

Page 149 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
03980
372 ELEC- Supply and fixing of CT operated direct reading type Ammeter on existing
6.2.4 panel, making connection by PVC insulated copper conductor with PVC
sleeves / channel etc. as required.
Makes: As per list of recommended brands.
Analog type (96 mm x 96 mm)
MAT- a Below 500 A 1 No 935
03981
MAT- b Above 500A 1 No 935
03982
Digital type
MAT- c Below 500 A 1 No 2090
03983
MAT- d Above 500 A 1 No 2090
03984
373 ELEC- Supply and Fixing of Current Transformer, with all necessary support in
6.2.5 existing panel including connection etc. as required:
Makes: As per list of recommended brands.
MAT- a up to 150 / 5 Ratio, 5 VA, class 1 accuracy 1 No 523
03985
MAT- b from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy 1 No 770
03986
MAT- c from 500 / 5 to 1600/5 Ratio, 15 VA, class 1 1 No 1045
03987 accuracy
MAT- d from 2000 / 5 to 3200 /5 Ratio, 15 VA, class 1 1 No 1650
03988 accuracy
374 MAT- ELEC- Supply and fixing of selector switch for voltmeter (4 1 No 374
03989 6.2.6 position) including making connection etc. as
required
Makes: As per list of recommended brands.

375 MAT- ELEC- Supply and fixing of CT linked selector switch of 10 1 No 413
03990 6.2.7 A for Ampere meter (4 position) including making
connection etc. as required.
Makes: As per list of recommended brands.

Page 150 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
376 ELEC- Supply and fixing of single phase Electronic energy Meter,…...AC,50 HZ
6.2.8 as per IS13010 up to 40A range with 200% over load capacity complete
with connections etc., complete on the existing board.
Makes: As per list of recommended brands.

MAT- a Single Phase 1 No 1100

03991
MAT- b Three Phase 1 No 3080
03992
377 ELEC- Supply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp with
6.2.9 integral circuit, terminal block, including connection etc. as required

MAT- a Red/yellow/Green colour 1 No 132

03993
MAT- b Blue colour 1 No 220
03994
378 ELEC- Supply and Fixing of Tap-off boxes suitable for following size of approved
6.2.10 design
MAT- a up to 95 sq. mm (3.5/4 core) 1 No 440
03995
MAT- b from 120 sq. mm. to 185 sq. mm (3.5/4 core) 1 No 770
03996
379 MAT- ELEC- Supply and fixing of energy analyzer (multi-function 1 No 11550
03997 6.2.11 energy meter) with LCD/LED display capable of
minimum 20 numbers electrical parameters display
with 1A/5A CT input for LV/ HV network, RS 485
communication port etc. complete in all respect.
380 ELEC- Supply Installation Testing and commissioning of self-healing MPP/MP
6.2.12 type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in
existing panel or parallel with load terminals , the capacitor shall be fitted
with discharge resistors, pressure sensitive disconnector ( PSD ) and
shall have dissipation factor less than 0.0025 at 50 Hz and total wattage
loss less than 0.5 Watt per KVAR. including making connections with
suitable capacity conductors/cables testing as
required.
Makes: As per list of recommended brands.
MAT- a Standard duty Single phase 250 V / Three phase 1 237
03998 440 V, 50 Hz capacitor (Bank) KVAR

Page 151 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b Heavy duty Three phase 440 V, 50 Hz capacitor 1 356
03999 (Bank) KVAR
381 MAT- ELEC- Supply Installation Testing and commissioning of microprocessor based
04000 6.2.13 intelligent power factor correction relay having sensitivity up to 50 milli
Amp secondary current and following way, self-analyzing auto c/k setting
according to targeted power factor setting, the relay shall have minimum
three digit display unit for display of real power factor, targeted power
factor, lag/lead capacitor switching status, alarm output for under current,
over current, insufficient compensation, indication of switching on units,
auto/manual status, and shall have over load protection, no volt release
etc. as required.
Makes: As per list of recommended brands.
6 to 14 stage - sensitivity upto 50 milli Amp 1 No 21958
382 ELEC- Supply and Fixing of Cam operated rotary switches on existing panel with
6.2.14 2 way and off position.
Makes: As per list of recommended brands.
one pole
MAT- a 16 A 1 No 415
04001
MAT- b 32 A 1 No 534
04002
MAT- c 63 A 1 No 771
04003
Two pole
MAT- d 16 A 1 No 475
04004
MAT- e 32 A 1 No 629
04005
MAT- f 63 A 1 No 1039
04006
Three pole
MAT- g 16 A 1 No 593
04007
MAT- h 32 A 1 No 831
04008
MAT- i 63 A 1 No 1484

Page 152 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
04009
Four pole
MAT- j 16 A 1 No 593
04010
MAT- k 32 A 1 No 890
04011
MAT- l 63 A 1 No 1662
04012
383 ELEC- Supply and fixing of ac operated heavy duty 230 /440 Volt power
6.2.15 contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of
mechanical interlocking, Din rail mounting type including making
connections, testing etc. as required.
Makes: As per list of recommended brands.
3 pole AC3 Rating contactors
MAT- a Up to 12 Amp 1 No 950
04013
MAT- b 13 to 32 Amp 1 No 1573
04014
MAT- c 35 to 40 Amp 1 No 1899
04015
MAT- d 41 to 50 Amp 1 No 4154
04016
4 pole AC 1 Rating contactors
MAT- e Up to 25 Amp 1 No 1187
04017
MAT- f 26 to 32 Amp 1 No 1424
04018
MAT- g 33 to 45 Amp 1 No 2374
04019
MAT- h 46 to 60 Amp 1 No 4985
04020

Page 153 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
384 ELEC- Supply and fixing of 440 Volt 3 pole capacitor (AC 6 B) duty contactor
6.2.16 with 3 no. early make and post break auxiliary contacts in series with
quick discharge damping resistors/ reactors to limit the inrush current,
conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type including
making connections, testing etc. as required. suitable for following
capacity capacitor bank.
Makes: As per list of recommended brands.
MAT- a Up to 6 KVAR 1 No 1899
04021
MAT- b 7 to 10 KVAR 1 No 2136
04022
MAT- c 11 to 20 KVAR 1 No 3205
04023
MAT- d 21 to 25 KVAR 1 No 4273
04024

MAT- e 30 KVAR 1 No 6172

04025
MAT- f 40 KVAR 1 No 9851
04026
MAT- g 50 KVAR 1 No 11394
04027
385 ELEC- Supply and fixing of thermal overload relay with built in single phase
6.2.17 protection and having at least 1NO & 1NC contacts, manual /auto reset
facility including making connection testing etc. as required.
Makes: As per list of recommended brands.
MAT- a Up to 14 A 1 No 1424
04028
MAT- b 15 to 20 A 1 No 1899
04029
MAT- c 21 to 30 A 1 No 2730
04030
MAT- d 31 to 40 A 1 No 3086
04031
386 ELEC- Supply and fixing of push button actuators and integral contact block of
6.2.18 dia. 22.5 mm including making connection etc. as required.
Makes: As per list of recommended brands.
MAT- a Non-luminous type 1 No 113
Page 154 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
04032
MAT- b Luminous type 1 No 154
04033
6.3 SUB STATION EQUIPMENT AND TRANSFORMERS
387 MAT- ELEC- Supply, Installation, Testing & Commissioning of HT 1 No 28486
04034 6.3.1 metering cubical panel as approved By DISCOMs
fabricated out of 14 SWG CRCA sheet steel in two
compartment & MS angle of size 60mmX6mm
having provision for Following:
Makes: As per list of recommended brands.
(i) Provision for fixing Tri-vector Meter (To be supplied by DISCOMs)

(ii) Provision for fixing of combined CT PT Set (To be supplied by

DISCOMs)
(iii)TT Block
(iv) 6mm Bakelite sheet on all sides.
388 MAT- ELEC- Supply, Transportation, Installation and Commissioning of 11 142428
6.3.1a
05547 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed
below with suitable CC foundation and 2 Nos GI pipe earthing
with brick masonry chambers etc., complete for finished item
of work.
Makes: As per list of recommended brands.
a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth
switch, manually operated spring charged mechanism with 2
no + 2 NC.
b) HT HRC fuse upto 63A - 3 nos.
c) Bus bar connection.
d) Indication lamps.
e) Manual trip Push button.
33 KV HT Panel (draw out type)
389 ELEC- Supply, Installation, Testing and Commissioning of
6.3.2 indoor type floor mounted metal clad, Switchgear
Panel enclosure of sheet steel preferably Aluzinc,
dust tight, vermin proof, totally enclosed cubicle floor
mounting, free standing type with single break,
horizontally draw out type breaker with trip free
mechanism as per latest standard i.e. IS/IEC 62271-
200 as amended up to date and as per Technical
specifications, IP4X for VCB Panel enclosure.
Page 155 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Switchgear Panel shall be electrically & mechanically
interlocked as per IEC 62271-1, full voltage insulated
copper Busbar with heat shrinkable sleeving,
complete with suitable metering & protection
devices, breaker featured with mechanical ON-OFF
indicator with hand trip device and all accessories
such as shunt trip coil, motorized & manually
operated spring charging mechanism, emergency
trip push buttons, auxiliary switch of 2NO + 2NC,
interconnections, space heaters, panel earthing etc.
and equipped with following switchgear and
accessories including connection suitable for 3x185
to 3x 400 Sq mm XLPE 33 kV cable (cable entry
from bottom) to be connected through heat
shrinkable jointing material etc., as required.
(Note - Cost of end termination not included in this
item.)
Makes: As per list of recommended brands.
INCOMER/OUTGOINGS 1 No. each comprising
the following
1 No. 800 Amp. VCB. 31.5KA
1 No. Integral Earth switch for line side earthing
3 No. dual core CTs 600A/1/1A of 7.5VA burden max and accuracy Class
0.5 for metering and class 5P10 for protection

3 No. Cast Resin 33000V/v3/110V/v3/110V/v3 PT Class 0.5/3P accuracy

and 30VA burden max with and protection fuses / MCB.

1 No. Digital voltmeter with selector switch.

1 No. Digital Ammeter with selector switch.
1 No. Microprocessor based numerical relays with O/L, E/F and S/C
protection with Integrated Arc sensing feature along with trip/lockout /
anti-pumping / aux. relays.
1 No. Multi-function meter.
Set of MCBs for Panel AC/DC
Set of MCBs for Main AC/DC
Set of Indication lamps LED types

Page 156 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
TNC Switch, L-R Switch, Pushbuttons for ON-OFF
MAT- a 33 KV 800A VCB Panel with 3 Nos. VCBs suitable 1 No 3151220
04035 for 50Hz 3-phase system, suitable for 31.5kA/3sec
short circuit withstand capacity & 31.5kA/1sec
Internal Arc capacity
b 33 KV 800A VCB Panel with 1 Nos. VCBs suitable 1 No
for 50Hz 3-phase system, suitable for 31.5kA/3sec 1050400
short circuit withstand capacity & 31.5kA/1sec
Internal Arc capacity
11KV HT Panel (draw out type)
390 ELEC- Supply, Installation, Testing and Commissioning of
6.3.3 indoor type floor mounted metal clad, Switchgear
Panel enclosure of sheet steel preferably Aluzinc,
dust tight, vermin proof, totally enclosed cubicle floor
mounting, free standing type with single break,
horizontally draw out type breaker with trip free
mechanism as per latest standard i.e. IS/IEC 62271-
200 as amended up to date and as per Technical
specifications, IP4X for VCB Panel enclosure.
Switchgear Panel shall be electrically & mechanically
interlocked as per IEC 62271-1, full voltage insulated
copper Busbar with heat shrinkable sleeving,
complete with suitable metering & protection
devices, breaker featured with mechanical ON-OFF
indicator with hand trip device and all accessories
such as shunt trip coil, motorized & manually
operated spring charging mechanism, emergency
trip push buttons, auxiliary switch of 2NO + 2NC,
interconnections, space heaters, panel earthing etc.
and equipped with following switchgear and
accessories including connection suitable for 3x185
to 3x 400 Sq mm XLPE 11kV cable (cable entry from
bottom) to be connected through heat shrinkable
jointing material etc., as required.
(Note - Cost of end termination not included in this
item.)
Makes: As per list of recommended brands.
INCOMER /OUTGOINGS 1 No. each comprising
the following
1 No. 800 Amp. VCB. 26.3KA

Page 157 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1 No. Integral Earth switch for line side earthing
3 No. dual core CTs 600A/1/1A of 7.5VA burden max and accuracy Class
0.5 for metering and class 5P10 for protection

3 No. Cast Resin 11000V/v3/110V/v3/110V/v3 PT Class 0.5/3P accuracy

and 30VA burden max with and protection fuses / MCB.

1 No. Digital voltmeter with selector switch.

1 No. Digital Ammeter with selector switch.
1 No. Microprocessor based numerical relays with O/L, E/F and S/C
protection with Integrated Arc sensing feature along with trip/lockout /
anti-pumping / aux. relays.
1 No. Multi-function meter.
Set of MCBs for Panel AC/DC
Set of MCBs for Main AC/DC
Set of Indication lamps LED types
TNC Switch, L-R Switch, Pushbuttons for ON-OFF
MAT- a 11 KV 800A VCB Panel with 3 Nos. VCBs suitable 1 No 1596381
04036 for 50Hz 3-phase system, suitable for 26.3kA/3sec
short circuit withstand capacity & 26.3kA/1sec
Internal Arc capacity
b 11 KV 800A VCB Panel with 1 Nos. VCBs suitable 1 No 540000
for 50Hz 3-phase system, suitable for 26.3kA/3sec
short circuit withstand capacity & 26.3kA/1sec
Internal Arc capacity

Oil Immersed TRANSFORMERS

391 ELEC- Supply, Transportation, Installation, Testing and Commissioning of
6.3.4 copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11,
ONAN type , Standard accessories, winding temperature rise of
45°C/40°C first fill oil, having permissible total loss values as per the
latest amendment no.4 of BIS in march 2021 for 33 KV as per energy
efficiency level - 2 at basic Insulation level conforming to ISS 2026
(Part- I to Part - II), latest amended and IS 1180 Part-I : 2014 described
as above with Cable box on HV side and Bus duct on LV Side , ON load
Tap changer(OLTC) with RTCC etc., with initial filling of oil as per IS
Page 158 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
335-1993 complete and as per the following continuous rating.
Makes: As per list of recommended brands as category I.
MAT- a deleted 1 No
04037
MAT- b deleted 1 No
04038
MAT- c 1250 KVA 1 No 2768625
04039
MAT- d 1600 KVA 1 No 3433095
04040
MAT- e 2000 KVA 1 No 4245225
04041
f 2500 KVA 1 No 4669480

392 ELEC- Supply, Transportation, Installation, Testing and Commissioning of

6.3.5 11/0.433 KV TRANSFORMER with all test reports. The
Transformer shall be designed and manufactured as per Energy
Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part-
I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest
ammended, OCTC with initial filling of oil as per IS 335-1993. The
basic details of the Transformer are as under.
Makes : As per list of recommended brands as category I.
1. Quantity : 1
2. Rated KVA: ........KVA
3. Service & Location: Continuous Outdoor
Distribution Transformer
4. Mounting: Plinth.
5. Wound: Copper Double wound
6. Type: Core type oil immersed
7. Cooling: ONAN
8. Temp Rise: 40⁰C in oil, 45⁰C by resistance
9. Vector Group: Dyn 11
10. Primary Connection: Delta
11. Nominal Voltage / Current: _
12. Highest system Voltage: 12000V
13. Primary Frequency :50 HZ +/- 3%
14. Number of Phases: 3
15. Primary wires: 3
16. Secondary connection: Star

Page 159 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
17. Secondary Volts / Current : 433V
18. Secondary phases: 3
19. Secondary wires: 4
20. Taps on primary winding for primary voltage
variation: +5% to - 10% in steps of 2.5% of 7 position
(6 Steps)
21. Terminal arrangement.
a. HV: HT terminal box as per the site condition.
b. LV: Cable box suitable to receive ----------
--Sq.mm XLPE cable
22. LV: One separate terminal for earthing.
23. Total Losses at 50% Loading [Watts] [Max] --- as
per IS
24. Total Losses at 100% Loading [Watts] [Max]---
as per IS
25.Percentage Impedance at 75 deg. C at -----as
per IS
26. No Load current: Less than 2% of full load
current.
27. Standard Fittings & Accessories.
a. Rating and terminal marking plate: One
b. Lifting Lugs: Two
c. Off-circuit tap switch: One.
d. Earthing Terminals : Two
e. Radiators (Attachable): Adequate
f. Explosion vent with Diaphragm : One
g. Conservator with Drain plug: one
h. Oil filling hole with cap :One
i. Oil level indicator: One
j. Dehydrating Silica gel Breather: One
k. Terminal Arrangement: HV With Terminal Box
l. Terminal Arrangement: LV Cable Box
m. Separate Neutral Bushing : One
n. Drain cum filter valve with blanking plate: One
o. Air release device: One
p. Thermometer Pocket: One
q. Four: Unidirectional flat rollers
r. One :10Cm dial thermometer (Rigid stem type)
MAT- a 100 KVA Copper Wound Transformer 1 No 478170
04042
MAT- b 160 KVA Copper Wound Transformer 1 No 788981
04043
MAT- c 250 KVA Copper Wound Transformer 1 No 947043
Page 160 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
04044
MAT- d 315 KVA Copper Wound Transformer 1 No 1261838
04045
MAT- e 500 KVA Copper Wound Transformer 1 No 1656327
04046
MAT- f Deleted 1 No
04047
MAT- g Deleted 1 No
04048
393 ELEC- Supply, Transportation, Installation, Testing and Commissioning of
6.3.5 A 11/0.433 KV TRANSFORMER with all test reports. The Transformer
shall be designed and manufactured as per Energy Efficiency Level – 1
at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with
latest amended, and as per IS 1180 Part-I : 2014 latest amended, OCTC
type with initial filling of oil as per IS 335-1993. The basic details of
the Transformer are as under.
Makes: As per list of recommended brands as category I.
a 1. Quantity : 1 1 No
2. Rated KVA: ........KVA
3. Service & Location: Continuous Outdoor
Distribution Transformer
4. Mounting: Plinth.
5. Wound: Copper Double wound
6. Type: Core type oil immersed
7. Cooling: ONAN
8. Temp Rise: 40⁰C in oil, 45⁰C by resistance
9. Vector Group: Dyn 11
10. Primary Connection: Delta
11. Nominal Voltage / Current: _
12. Highest system Voltage: 12000V
13. Primary Frequency :50 HZ +/- 3%
14. Number of Phases: 3
15. Primary wires: 3
16. Secondary connection: Star
17. Secondary Volts / Current : 433V
18. Secondary phases: 3
19. Secondary wires: 4
20. Taps on primary winding for primary voltage
variation: +5% to - 10% in steps of 2.5% of 7 position
(6 Steps)
21. Terminal arrangement.

Page 161 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
a. HV: HT terminal box as per the site condition.
b. LV: Cable box suitable to receive ----------
--Sq.mm XLPE cable
22. LV: One separate terminal for earthing.
23. Total Losses at 50% Loading [Watts] [Max] --- as
per IS
24. Total Losses at 100% Loading [Watts] [Max]---
as per IS
25.Percentage Impedance at 75 deg. C at -----as
per IS
26. No Load current: Less than 2% of full load
current.
27. Standard Fittings & Accessories.
a. Rating and terminal marking plate: One
b. Lifting Lugs: Two
c. Off-circuit tap switch: One.
d. Earthing Terminals : Two
e. Radiators (Attachable): Adequate
f. Explosion vent with Diaphragm : One
g. Conservator with Drain plug: one
h. Oil filling hole with cap :One
i. Oil level indicator: One
j. Dehydrating Silica gel Breather: One
k. Terminal Arrangement: HV With Terminal Box
l. Terminal Arrangement: LV Cable Box
m. Separate Neutral Bushing : One
n. Drain cum filter valve with blanking plate: One
o. Air release device: One
p. Thermometer Pocket: One
q. Four: Unidirectional flat rollers
r. One :10Cm dial thermometer (Rigid stem type)
100 KVA Copper Wound Transformer 1 No 409860
160 KVA Copper Wound Transformer 1 No 676269
250 KVA Copper Wound Transformer 1 No 811751
315 KVA Copper Wound Transformer 1 No 1081575
500 KVA Copper Wound Transformer 1 No 1419710
394 ELEC- Supply and Transportation of ISI marked copper wound Transformers
6.3.5 B 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard
accessories, winding temperature rise of 45°C/40°C first fill oil, having
permissible total loss values not exceeding 7.5%of the maximum total
loss values for 11 KV as per Energy Efficiency Level - 2 at basic
Page 162 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Insulation level conforming to ISS 2026 (Part- I to Part - II), latest
ammended and IS 1180 Part-I : 2014 described as above with Cable box
on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10%
to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993
complete and as per the following continuous rating.
Makes : As per list of recommended brands as category I.
MAT- a 630 KVA 1 No 2237170
08780
MAT- b 1000 KVA 1 No 2819985
08781
Dry Type transformers
395 ELEC- Supply ,Transportation of cast Resin (Dry Type) indoor type copper
6.3.6 double wound 33KV/0.433 KV, Three Phase 50 Hz Transformers
designed and manufactured as per IS 11171/IEC 60726 , ANSI and
NEMA Standards with all standard fittings, connected Delta on Primary
side and Star on Secondary side with additional neutral brought out on
load side 33000/433V with HV off load tap changing +5% to -15%
temperature rise by the resistance 90 degrees with terminal arrangement
Cable box on HV side and Bus duct on LV Side with off circuit Tap links
etc.,, complete Makes: As per list of recommended brands.
MAT- a 1000 KVA 1 No 3657000
04049
MAT- b 1250 KVA 1 No 4554000
04050
MAT- c 1600 KVA 1 No 5506200
04051
MAT- d 2000 KVA 1 No 6624000
04052
MAT- e 2500 KVA 1 No 7452000
04053
396 ELEC- Supply, Transportation, Installation, Testing and Commissioning of 3
6.3.7 Phase, 50 Hz, Dry type, Indoor type copper wound Transformer
designed and manufactured as per IS 2026-1977 and IS 11171-
1985, connected delta on primary side and Star on secondary side with
additional neutral brought out on load side, 11000V / (433V /415V)
with HV off load tap changing + 5% to -5% in steps of 2.5%,
temperature rise by the resistance 90⁰C complete with test
reports with the following standard mountings.
Makes: As per list of recommended brands.

Page 163 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1. Rated KVA : ........KVA (Cast Resin)
2. Service: Indoor
3. Mounting : Floor.
4. Copper wound : Double.
5. Type of cooling : ANAN.
6. Insulation Class : Class F
7. Temperature rise by resistance : 90⁰C
8. Vector Group: Dyn 11
9. Primary Connection : Delta
10. Primary Volts : 11000
11. Primary Frequency : 50
12.Primary Phases : 3
13. Primary wires: 3
14. Secondary connection : Star
15. Secondary Volts : 433V / 415V
16. Secondary phases : 3
17. Secondary wires: 4
18. Taps on primary winding for primary voltage
variation : +5.0% to - 10.0% in steps of 2.5% through
links.
19. Terminal arrangement.
a. HV: Cable end box b. LV : Cable end box
20. No load losses (Watts): ........... As per IS
specifications
21. Load losses (Watts): ..............As per IS
specifications
22. Impedance(Z%) : ............As per IS
specifications
23. Fittings & Accessories.

Page 164 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
a. Rating and terminal marking plate b. Earthing
terminals
c. Lifting Lugs
d. Winding temperature Indicator
e. Separate neutral bushing
f. Uni directional flat rollers.
MAT- a 250 KVA Copper Wound Cast Resin Transformer 1006940
04054
MAT- b 315 KVA Copper Wound Cast Resin Transformer 1157475
04055
MAT- c 500 KVA Copper Wound Cast Resin Transformer 1577455
04056
MAT- d 630 KVA Copper Wound Cast Resin Transformer 1727990
04057
MAT- e 750 KVA Copper Wound Cast Resin Transformer 2029060
04058
MAT- f 1000 KVA Copper Wound Cast Resin Transformer 2555300
04059
6.4 MAINTENANCE AND REPAIRS OF TRANSFORMERS
397 MAT- ELEC- Carryout routine maintenance, servicing and testing 1 No 5940
04060 6.4.1 of 630A to 1000A L.T.ACB by cleaning fixed
contacts, moving contacts and arc chutes including
servicing and putting the ACB in perfect working
condition after setting all relay and ON, OFF
mechanism etc., done with only manufacturing
companies
398 MAT- ELEC- Carryout routine maintenance and servicing of LT. 1 No 3564
04061 6.4.2 Cubical panel board having approximately 15 to 22
Nos of switches cleaning with power blower and
servicing the contacts, tightening the connection of
incoming and outgoing cables, and checking the
operating mechanism for smooth functioning of
switches and putting them in smooth working
condition.

Page 165 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
399 MAT- ELEC- Routine maintenance of transformer, including 1 No 5346
04062 6.4.3 testing of insulation resistance, oil breakdown
strength. Reconditioning / replacement of silica zel,
cleaning of transformer and topping upto oil level if
required (extra cost will be paid for oil).
400 MAT- ELEC- Testing of Transformer oil for dielectric breakdown 1 No 713
04063 6.4.4 strength.
401 ELEC- Removing the existing transformer from the plinth / Pole and refixing the
6.4.5 standby transformer of following capacity including connections etc.,
complete………….
MAT- a up to 315 KVA 1 No 4158
04064
MAT- b 500 / 1000 KVA 1 No 5346
04065
402 ELEC- Replacing old and unserviceable gasket of top cover plate of transformer
6.4.6 having following capacity. -…………

MAT- a up to 315 KVA 1 No 891

04066
MAT- b 500 / 1000 KVA 1 No 1188
04067
403 ELEC- Replacing old and unserviceable gasket of bushing for the following
6.4.7 Transformer capacity. -………….

MAT- a up to 315 KVA HT, 1 No 416

04068
MAT- b 500 / 1000 KVA HT, 1 No 891
04069
MAT- c up to 315 KVA LT, 1 No 1069
04070
MAT- d 500 / 1000 KVA LT, 1 No 1782
04071
404 ELEC- Replacement the H T / L. T burnt out winding coils of distribution
6.4.8 transformer including rewinding, varnishing and vacuuming etc., duly
retaining the removed burnt winding coils by the Contractor / Firm- …….
MAT- a For copper coils 1 Kg 713
04072
Page 166 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b For aluminum coils 1 Kg 475
04073
405 MAT- ELEC- Insulating HT / LT copper / aluminum coils for 1 Kg 387
04074 6.4.9 Transformers.

406 ELEC- Painting to transformer with 2 coats Zinc chromate red oxide duly
6.4.10 scraping existing paint followed by 2 coats of hammer ton grey paint etc.,
complete. -……….
MAT- a Upto 500 KVA 1 No 4158
04075
MAT- b 630 / 1000 KVA 1 No 5346
04076
407 ELEC- Replacing ……….. for distribution Transformer by new one.
6.4.11
MAT- a H.T bushing 1 No 416
04077
MAT- b H.T bushing with metal parts 1 No 475
04078
MAT- c L.T bushing Upto 315 KVA 1 No 238
04079
MAT- d L.T bushing 500 / 1000 KVA 1 No 297
04080
MAT- e L.T bushing rod with metal parts up to 315 KVA 1 No 594
04081
MAT- f L.T bushing rod with metal parts 500/1000 KVA 1 No 2198
04082
408 ELEC- Drying the repaired transformer with appropriate heat / air of following
6.4.12 capacity of transformers. ……..-
MAT- a Upto 315 KVA 1 No 5227
04083
MAT- b 500 / 1000KVA 1 No 6534
04084
409 ELEC- Loading, transportation and unloading of transformer from site to
6.4.13 Workshop or vice versa. ………
MAT- a Upto 500 KVA 1 No 5346
04085

Page 167 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b 630 / 1000 KVA 1 No 8316
04086
410 MAT- ELEC- Supply of new and tested transformer oil as per IS- 1 Ltr 143
04087 6.4.14 335 - 1972 (per Ltr)
411 ELEC- Filtration of transformer oil as per ISS specifications filters to dielectric
6.4.15 strength above 40KV …….
MAT- a at site. (Per Ltr) excluding transportation 1 Ltr 12
04088
MAT- b at workshop (per Ltr) 1 Ltr 9
04089
6.5 OVERHEAD LINES& LINE MATERIALS
412 ELEC- Supply and transportation of ………….PSCC Poles
6.5.1
MAT- a 8.0 Mtr , Working load-140 Kgs 1No 2415
04090
MAT- b 8.0 Mtr , Working load-200 Kgs 1No 3450
04091
MAT- c 9.1 Mtr , Working load-280 Kgs 1No 4910
04092
413 ELEC- Supply and transportation of 9 mtr length ………….RS Joist Poles
6.5.2
MAT- a 150 x 75 mm (Wt of the pole-140 Kgs) 1No 10500
04093
MAT- b 175 x 85 mm (Wt of the pole-215Kgs) 1No 16125
04094
MAT- c 150 x 150 mm (Wt of the pole-333 Kgs) 1No 24975
04095
414 ELEC- Supply and erection of GI stay set of dia……... including stay clamps,
6.5.3 turn buckle and GI stay wire tight end through strain insulator including
excavation of pit and cc work etc., complete
MAT- a 20mm,2.4 mtr long stay rod and anchor plate 1 set 2245
04096 380mmx380mmx6.4mm
MAT- b 16mm,1.8 mtr long stay rod and anchor plate 1 set 1699
04097 380mmx380mmx6.4mm

Page 168 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
415 ELEC- Supply and fixing of 11KV -V- cross arms with ……………...duly welded
6.5.4 with necessary clamping arrangements etc., complete

MAT- a 75x40 mm MS channel including 4 nos 50 x 50 x6 1 No 1494

04098 mm packing plates (9 Kgs)
MAT- b 65 x65 x6 MS angle (8.2 Kgs) 1 No 1058
04099
416 ELEC- Supply and fixing of LT 3 phase 4 wire cross arm of length 3' 8" with…….
6.5.5 and necessary clamping arrangements, cutting, drilling and welding etc.,
complete
MAT- a 50 x 50 x6 mm MS angle ( wt 5.75 Kgs) 1 No 517
04100
MAT- b 65 x65 x6 MS angle (wt 7 Kgs) 1 No 610
04101
417 ELEC- Supply and fixing of LT 3 phase 5 wire cross arm of length 4' 5" with…….
6.5.6 and necessary clamping arrangements, cutting, drilling and welding etc.,
complete
MAT- a 50 x 50 x6 mm MS angle ( wt 7.30Kgs) 1 No 667
04102
MAT- b 65 x65 x6 MS angle (wt 9.60 Kgs) 1 No 841
04103
418 MAT- ELEC- Supply and fixing of LT single phase 3 wire cross arm with 50 411
04104 6.5.7 x 50 x6 mm MS angle of 2' 5" ( wt 4.20 Kgs ) and necessary
clamping arrangements ,cutting ,drilling and welding etc.,
complete
419 MAT- ELEC- Supply and fixing of 11 KV pin Insulator (IS 731/ 220 220
04105 6.5.8 1971) with minimum creepage distance of 300 mm
on existing cross arm including all accessories like
Hot dip GI spindle and nuts etc.,
420 ELEC- Supply and fixing of ……... LT porcelain pin insulator as per IS 1447-
6.5.9 1997 suitable for working voltage 1100 V including all accessories like
Hot dip GI spindle and nuts etc.,

MAT- a 100 x 65 mm each 97

04106
MAT- b 100 x 85 mm each 109
Page 169 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
04107
421 ELEC- Supply and fixing of ……... LT porcelain shackle insulator as per IS
6.5.10 1443-1979 suitable for working voltage 1100 V including all accessories
like Hot dip GI spindle and nuts etc.,

MAT- a 75 x 90 mm each 169

04108
MAT- b 100 x 110 mm each 206
04109
422 MAT- ELEC- Supply and fixing of distribution type lightning each 3025
04110 6.5.11 arrester 11 KV 5 kA as per IS 3070 with mounting
base on the existing DP structure
423 MAT- ELEC- Supply and fixing of 100 A 11 KV Horn Gap fuse set each 6655
04111 6.5.12 as per IS 9385 on existing DP structure with 6 no of
24 KV /22 KV post Insulators (IS 5350, Hot dipped
Hardware, fuse wire of required size etc., complete
424 MAT- ELEC- Supply and fixing of 11 KV danger plates on the each 121
04112 6.5.13 existing poles
425 MAT- ELEC- Supply and fixing of 11 KV ,400 A 3 phase central each 21780
04113 6.5.14 post rotating double break type AB switch(isolator)
as per IS 9921) without earth blade, gang operated,
Horizontal type, operating mechanism with GI spring
loaded reverse loop type fixed contact, solid HD
electrolytic copper tubular moving contact with
silver/Nickel plated at end points,9 Nos post
insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip
galvanizing hardware, GI pipe, Nuts and bolts etc.,
complete.,
426 ELEC- Supply and Transportation of Over Head …………. Conductor as per IS
6.5.15 398 (PART - II): 1996

a 7/3.55 ACSR Rabbit (214 Kg/KM) 1KM

b 7/2.59 ACSR weasel (128 Kg/KM) 1KM
c 7/2.11 ACSR squirrel (85 Kg/KM) 1KM
MAT- d 100 Sq mm AAA 1KM 102248
04114
MAT- e 55 Sq mm AAA 1KM 67000
04115
Page 170 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- f 34 Sq mm AAA 1KM 36000
04116
427 ELEC- Supply and erecting fencing section having size 1 No As per
6.5.16 2045 mt height from ground level and 1.2 mt width DATA
by using angle iron size 50 x50 x6 mm erected in cc
foundation 15 x15x40 cm deep. The section of the
frame shall be fitted with flat iron support of size 25 x
6 mm on top, bottom and mid-way and chain link
Jolley of 3.26 mm dia /10 SWG GI hard wire mesh of
50 x50 mm to the angle iron at every distance of 30
cm , by iron studs complete duly painted with one
coat of red oxide and 2 coats of aluminum paint,
428 ELEC- Supply and erecting double leaf hinged door each 1 No As per
6.5.17 150 cm in width and 180 cm in height using 40 mm DATA
dia B grade ISI mark GI pipe from all 4 sides with
necessary bends and cross supports of angle iron 45
X45 X5 mm with the door leaf covered with chain
links Jolley 50 X 50 mm made from 3.26 mm dia/10
SWG Gi wire with necessary flat iron covering all
round with necessary no of spikes of size 10 mm dia
at top and bottom at 150 mm apart to match the
height of fencing. The door shall have latches and
side channel of 100 X50 X5 mm rigidly welded for
providing locking arrangement Godrej/ Navtal make
medium size lock with duplicate keys, fencing
completely erected and painted with anti-corrosive
red oxide paint and 2 coats of prescribed enamel
paint/silver paint. The Channel iron of size 150X75
mm by 2.5 mtr long shall be provided and erected at
both sides of gate.
429 ELEC- Supply and erecting 50 X50X6 mm angle iron corner 1 No As per
6.5.18 support 0.5 mt way from the fence supports fixed at DATA
the middle fencing frame and other side in cc
foundation 15 X15X 40 cm complete duly painted
with 1 coat of red oxide and 2 coats of aluminum
paint.
430 ELEC- Providing and spreading HBG metal of size 40 mm size for As per
6.5.19 100 mm depth above the ground level. DATA

Page 171 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
431 MAT- ELEC- Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in 1 No 12100
6.5.20
05548 size with necessary excavation in ground at the
bottom with 150mm thick 1:2:4 cement concrete raft
at the bottom and top and 225mm thick wall
constructed in stone masonry and remaking hallow
portion shall be filled with stone chips duly plastered
20mm thick outsides including watering etc.,
complete.
432 MAT- ELEC- Providing CTPT plinth 600mm x 600mm x 2.1 mtr in 1 No 7260
6.5.21
05549 size with necessary excavation in ground at the
bottom with 150mm thick 1:2:4 cement concrete raft
at the bottom and top duly plastered 20mm thick
outsides including watering etc., complete.
6.6 LIGHTENING PROTECTIVE SYSTEM
Advanced LPS
433 MAT- ELEC- Supply of ESE Air Terminal of external wide area of 1 No 114950
6.6.1 a
05550 protection system based on proactive Early
Steamer Emission (ESE) Technology
manufactured in accordance with NFC 17-
102:2011, is made of high-quality, non-corrosive and
weather resistant XL-304 Stainless Steel Having
triggering advance t = 30µs, Protection Radius
ranging from 48 Meters in Level-I to 71 Meters in
Level-IV when installed on a 5 Meters Mast. ESE
terminal is capable to withstand Current Impulses of
40kA (5 Shots of 8/20µs wave shape) and having
capturing rod dia of 25mm. Makes: As per list of
recommended brands.
434 MAT- ELEC- Supply of ESE Air Terminal of external wide area of 1 No 121000
6.6.1 b
05551 protection system based on proactive Early
Steamer Emission (ESE) Technology
manufactured in accordance with NFC 17-
102:2011, is made of high-quality, non-corrosive and
weather resistant XL-304 Stainless Steel Having
triggering advance t = 50µs, Protection Radius
ranging from 68 Meters in Level-I to 95 Meters in
Level-IV when installed on a 5 Meters Mast. ESE
terminal is capable to withstand Current Impulses of
40kA (5 Shots of 8/20µs wave shape) and having
capturing rod dia of 25mm. Makes: As per list of
recommended brands.

Page 172 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
435 MAT- ELEC- Supply of ESE Air Terminal of external wide area of 1 No 137940
04117 6.6.1 c protection system based on proactive Early
Steamer Emission (ESE) Technology
manufactured in accordance with NFC 17-
102:2011, is made of high-quality, non-corrosive and
weather resistant XL-304 Stainless Steel Having
triggering advance t = 60µs, Protection Radius
ranging from 79 Meters in Level-I to 107 Meters in
Level-IV when installed on a 5 Meters Mast. ESE
terminal is capable to withstand Current Impulses of
40kA (5 Shots of 8/20µs wave shape) and having
capturing rod dia of 25mm. Makes: As per list of
recommended brands.

436 MAT- ELEC- Installation and commissioning of advanced lighting 1 No 35090

04118 6.6.2 protection systems which includes:
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
4. Installation of Counter
5. Installation of GI Mast with stay wire.
6. Termination of down conductor to earth bus etc
complete.

437 MAT- ELEC- Supply of 6 Digit Electronic/Mechanical counter 1 No 18150

04119 6.6.3 Makes: As per list of recommended brands.

438 MAT- ELEC- Supply of G.I mast of 5 Meters length, 50 mm Dia, 1 Set 7260
04120 6.6.4 with FRP Collar (Insulating Bush) Base Plate &
Complete Fitting Accessories with Supporting Guy
Wire (Stay Wires) and all fitting accessories
439 MAT- ELEC- Supply and Installation of IEC 62561-7 compliant 1 No 2662
04122 6.6.5 Eco-friendly, Maintenance free, anti-corrosive, lead-
free, super conductive, mineral based high-grade
earthing compound, to enhance soil conductivity.
With resistance <0.12 ohms-meter, Sulphur Free,
should be tested as per IEC-62561-7 for resistance
Toxic Elements, Leachable elements etc. 25 Kg Bag
Makes: As per list of recommended brands.
440 MAT- ELEC- Supply of Bentonite Moisture Retaining Powder 1 No 206
04123 6.6.6 30 Kg Bag

Page 173 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
441 MAT- ELEC- Supply of Concrete Earth Pit of Dimensions: Width: 1 No 1815
04124 6.6.7 320 mm, Length: 320 mm, Height: 192mm, Weight
30 Kgs, Load bearing Capacity: 5000 Kgs
CONVENTIONAL LPS AS PER IS/IEC 62305
Air Terminal
442 MAT- ELEC- Supply, installation, testing and commissioning of 8 1 RM 109
04125 6.6.8 mm Aluminum Round Conductor complete as per
requirements of DIN EN 50164-2 (VDE 0185 part
202) & VDE 0185-305 (IS/IEC 62305)
443 MAT- ELEC- Supply, installation, testing and commissioning of each 61
04126 6.6.9 Roof conductor holder for parapet- Polyamide
Conductor holder: With M8 female thread or
diameter 7mm, M8 Screw to connect the conductor
holder. Weather and temperature resistant from -35
to +90 degree Celsius tested. Conductor holder @ 1
meter distance
444 MAT- ELEC- Supply, installation, testing and commissioning of each 157
04127 6.6.10 Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling
weight 1Kg (frost-resistant concrete). Sleeve from
polyethylene, black @ 1 meter distance.
445 MAT- ELEC- Supply, installation, testing and commissioning of each 1997
04128 6.6.11 Fang Fix Junior system - Inclusive of Al interception
rod of 1Mtr length (10mm dia), Quick mounting of the
interception rod in the base using plug technology
446 MAT- ELEC- Supply, installation, testing and commissioning of each 160
04129 6.6.12 cross universal connector: For T and cross
connection, to route vertical down conductor /mesh
formation made of hot dipped galvanized iron with
necessary screws etc as required. Installed with 4
hexagonal bolts M8*25 with M8 hexagonal nuts
447 MAT- ELEC- Supply, installation, testing and commissioning of each 479
04130 6.6.13 expansion piece with connector: For equalizing
temperature related length changes. Necessary on
conductors of length over 20 meters. For round conductor
Rd 8/ALU connector: For T cross and parallel connectors.
Quick installation using hexagonal bolt M10X30 high-
grade hot dip galvanized. Confirms to the requirements
according to DIN VDE 0185-305 (IS-IEC
2305)(2nos/expansion piece ).

Page 174 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
DOWN CONDUCTOR
448 MAT- ELEC- Supply, installation, testing and commissioning of 8 1 RM 109
04131 6.6.14 mm Aluminum Round Conductor complete as
specified in drawing & meets the requirements of
DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-
305 (IS/IEC 62305)
449 MAT- ELEC- Supply, installation, testing and commissioning of each 61
04132 6.6.15 Roof conductor holder for parapet- Polyamide
Conductor holder: With M8 female thread or
diameter 7mm, M8 Screw to connect the conductor
holder. Weather and temperature resistant from -35
to +90 degree Celsius tested. Conductor holder @ 1
meter distance
450 MAT- ELEC- Supply, installation, testing and commissioning of each 375
04133 6.6.16 Test Joint (Folding Clamp) suitable to connect 8mm
round conductor and max by 30x3 mm GI strip as
specified in drawing and directed by Engineer
451 MAT- ELEC- Supply, installation, testing and commissioning of each 19965
04134 6.6.17 Lightning counter - To count no of lightning strike & it
can record the date and time of the lightning incident
also tested as per IEC 62561-6.
6.7 EARTHING
452 MAT- ELEC- Providing earth electrode of low carbon steel rod, UL 1 No 11495
04135 6.7.1 listed of 17.2 mm dia, 3 Mtr long, coated with copper
of 254 microns thickness, CPRI tested for short time
current withstand test of 25 kA, coating thickness,
environmental test (Salt Mist Test), Bend test,
Tensile strength, Yield / tensile ratio, Electrical
Resistivity test, complete with clamps and 2 bags of
(Earth plus ULTRA /TIRUMALA) high grade earthing
compound IEC 62561-7 complaint Eco-friendly,
Maintenance free, anti-corrosive, lead-free, super
conductive, mineral based high-grade earthing
compound, to enhance soil conductivity. With
resistance <0.20 ohms-meter, should be leach proof
& Sulphur free complete with earth inspection
chamber of dimensions: width: 320 mm x 320 mm,
Height : 192 mm, weight : 30 Kgs, Load bearing
capacity : 5000 Kgs

Page 175 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
453 MAT- ELEC- Providing earthling as per IS 3043 with perforated 3 1 No As per
04136 6.7.2 mtr long 40 mm dia B class GI pipe including all DATA
accessories like nuts bolts reducer, nipple, wire
meshed funnel and CC finished chamber covered
with hinged type with CI cover, CI frame of size 300
X 300 mm and embodying the pipe complete with
alternate layers of salt and coke /charcoal/bentonite
powder testing earth resistance as required etc.,
complete
454 MAT- ELEC- Providing earthling as per IS 3043 with GI earth 1 No As per
04137 6.7.3 plate of size 600 x600 x 6 mm by embodying 3 to 4 DATA
mtr below the ground level with 40 mm dia GI B
class perforated pipe including all including all
accessories like nuts bolts reducer, nipple, wire
meshed funnel and CC finished chamber covered
with hinged type with CI cover ,CI frame of size 300
X 300 mm and embodying the pipe complete with
alternate layers of salt and coke /charcoal/bentonite
powder testing earth resistance as required etc.,
complete
455 MAT- ELEC- Providing earthing as per IS 3043 with copper earth 1 No As per
04138 6.7.4 plate of size 600 x 600 x 3.15 mm by embodying 3 DATA
to 4 mtr below the ground level with 40mm dia 'B'
Class G.I Pipe by excavating a pit to a depth of 3 to
4 Mtr in all soils for Sophisticated Electronic
equipment as per National Electric Code and earth
connection from electrode Copper strip of 25mm x
5mm x 200mm length to be bolted with nut bolts to
G.I. pipe including 25mm x 3mm copper strip of
6Mtrs length connected from plate to Copper strip
including filling with 20Kg Salt and 40Kg Charcoal or
40Kg bentonite powder including all accessories like
nuts bolts reducer, nipple, wire meshed funnel and
CC finished chamber covered with hinged type with
CI cover ,CI frame of size 300 X 300 mm ,testing
earth resistance as required etc., complete

Page 176 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
456 MAT- ELEC- Providing independent earthing for Important 1 No 9075
04139 6.7.5 equipment with 100mm dia Heavy gauge C.I ( Cast
iron ) pipe with Flange 2.5m long enclosed in C.C/
brick masonry chamber of 450m x 450m x 400mm
with R.C.C. Slab cover duly providing staggered
holes filling with salt and charcoal from the bottom of
the pipe giving earth connection from electrode
through G.I strip of 40 x 6mm x 200mm length with
all accessories and labour charges complete, as per
IS specifications 732/1982 (Part II)
457 ELEC- PROVIDING OF INDEPENDENT CHEMICAL 1 No 8955
6.7.6 EARTHING AFTER EXCAVATING AN EARTH PIT.
THE EARTH ELECTRODES, 50MM DIA, WALL
THICKNESS, 3.25MM, 3 MTR LONG GALVANIZED
GI PIPE, STRIP IN PIPE SYSTEM FITTED WITH
40X6X3100MM GI STRIP FROM TOP TO
BOTTOM, TERMINAL HOLE OF 12MM, PIPE
FILLED WITH CONDUCTIVE CRYSTALLINE
COMPOUND ,INCLUDING 2 BAG OF EARTH LIFE
COMPOUND ( 25 KGS EACH ) AS PER IS 3043.
with earth inspection chamber of dimensions: Width
:320 mm x 320 mm, Height: 192 mm, Weight: 30
Kgs, Load bearing capacity: 5000 Kgs including
drilling of bore in any kind of soil.
458 ELEC- PROVIDING OF INDEPENDENT CHEMICAL 1 No 9675
6.7.7 EARTHING AFTER EXCAVATING AN EARTH PIT.
THE EARTH ELECTRODES, 50MM DIA, WALL
THICKNESS, 3.25MM, 3 MTR LONG COPPER
BONDED (250 MICRONS) MS PIPE, STRIP IN
PIPE SYSTEM FITTED WITH 40X6X3100MM
COPPER BONDED STRIP FROM TOP TO
BOTTOM, TERMINAL HOLE OF 12MM, PIPE
FILLED WITH CONDUCTIVE CRYSTALLINE
COMPOUND, INCLUDING 2 BAG OF EARTH LIFE
COMPOUND (25 KGS EACH) AS PER IS 3043. with
earth inspection chamber of dimensions: Width: 320
mm x 320 mm, Height: 192 mm, Weight: 30
Kgs, Load bearing capacity: 5000 Kgs including
drilling of bore in any kind of soil.

Page 177 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
459 ELEC- PROVIDING OF INDEPENDENT CHEMICAL 1 No 17865
6.7.8 EARTHING AFTER EXCAVATING AN EARTH PIT.
THE EARTH ELECTRODES, 50MM DIA, WALL
THICKNESS, 1.8MM, 3 MTR LONG PURE
COPPER PIPE, STRIP IN PIPE SYSTEM FITTED
WITH 40X6X3100MM PURE COPPER STRIP
FROM TOP TO BOTTOM, TERMINAL
HOLE OF 12MM, PIPE FILLED WITH
CONDUCTIVE CRYSTALLINE COMPOUND,
INCLUDING 2 BAGS OF
EARTH LIFE COMPOUND (25 KGS EACH) AS PER
IS 3043. with earth inspection chamber of
dimensions: Width: 320 mm x 320 mm, Height: 192
mm, Weight: 30 Kgs, Load bearing capacity:
5000 Kgs including drilling of bore in any kind of soil.
EARTH CONDUCTORS
460 ELEC- Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical
6.7.6 run in Ground/surface/Recess including, riveting, soldering, saddles,
making connection etc as required
MAT- a 6 SWG Copper wire (0.16 Kgs/1 Mtr) 1 Mtr 146
04140
MAT- b 8 SWG Copper wire(0.1155Kgs/1Mtr) 1 Mtr 106
04141
MAT- c 10 SWG Copper wire(0.075Kgs/1Mtr) 1 Mtr 69
04142
MAT- d 6 SWG GI wire (0.192 Kgs/Mtr) 1 Mtr 16
04143
MAT- e 8 SWG GI wire(0.104Kgs/1Mtr) 1 Mtr 10
04144
MAT- f 10 SWG GI wire(0.067Kgs/1Mtr) 1 Mtr 4
04145
MAT- g 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) 1 Mtr 486
04146
MAT- h 25mm x 3mm Copper Flat (0.663Kgs/1Mtr) 1 Mtr 608
04147
MAT- i 32 mm x 6mm Copper Flat (1.9 Kgs/Mtr) 1 Mtr 1743
04148
MAT- j 50 mm x 6mm Copper Flat (2.680Kgs/1Mtr) 1 Mtr 2460

Page 178 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
04149
MAT- k 25mm x 3mm GI Flat (0.656 Kgs/Mtr) 1 Mtr 55
04150
MAT- l 25mm x 6mm GI Flat (1.18Kgs/1Mtr) 1 Mtr 97
04151

MAT- m 32 mm x 6mm GI Flat (1.6 kgs/Mtr) 1 Mtr 137

04152
MAT- n 50 mm x 6mm GI Flat (2.5 Kgs/mtr) 1 Mtr 208
04153
SECTION 7
7.0 LOCAL AREA NETWORK
461 ELEC- Supply, laying ,testing and commissioning of 4-pair, Cat6 Solid (Third
7.1.1 party ETL Intertek tested up to 700 MHZ ) to support 1Gbps with Cross
(+) filler pair separator & PVC sheath 23 AWG, STP/UTP Cable , Meets
or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the
existing raceways /PVC conduits including making connections to
information outlets and patch panels with ferruling at both ends for
identification with necessary tools for punching stripping crimping and
testing required etc., complete.
Makes: As per list of recommended brands as Category I.
MAT- a 6 UTP cable RM 45
04154

MAT- b 6 STP cable RM 70

05553

462 MAT- ELEC- Supply installation testing and commissioning of each 1050
04155 7.1.2 2nos of Cat6 Tool less built-in crimping mechanism
Information Outlet with Dust Cover Exceed ANSI/
TIA-568-C.2 and ISO/IEC 11801 standards with
2module face plate for Category 6 component
performance & Compatible to T568A,T568B wiring
pattern and UL-940V0 Rated Plastic &RoHS
Compliant
Makes: As per list of recommended brands as
Category I.

Page 179 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
463 MAT- ELEC- Supply installation testing and commissioning of1no each 520
04156 7.1.3 of Cat6 Tool less built-in crimping mechanism
Information Outlet with Dust Cover Exceed ANSI/
TIA-568-C.2 and ISO/IEC 11801 standards with
1module face plate for Category 6 component
performance & Compatible to T568A, T568B wiring
pattern and UL-940V0 Rated Plastic &RoHS
Compliant
Makes: As per list of recommended brands as
Category I.
464 ELEC- Supply installation testing and commissioning of 4 pair 23AWG Cat-6
7.1.4 UTP, flexible, double ended patch cords along with 2 nos of RJ 45
connectors with strain relief boots Compatible to
T568A,T568Bspecifications including making connections to information
outlets
Makes: As per list of recommended brands as Category I.
MAT- a 1 mtr / 3 ft each 253
04157
MAT- b 2 mtr /7 ft each 298
04158
MAT- c 3 mtr /10 ft each 343
04159
465 MAT- ELEC- Supply installation testing and commissioning of LC
04160 7.1.5 Pigtails LSZH 1mtr for fiber core connectivity
Makes: As per list of recommended brands as
Category I.
a Single Mode each 290

b Multi Mode each 360

466 MAT- ELEC- Supply installation testing and commissioning of SC
04161 7.1.6 Pigtails LSZH 1mtr for fiber core connectivity.
Makes: As per list of recommended brands as
Category I.
a Single Mode each 405
b Multi Mode each 494
467 MAT- ELEC- Supply installation testing and commissioning of LC
04162 7.1.7 Pigtails LSZH 2mtr for fiber core connectivity.
Makes: As per list of recommended brands as
Category I.
Page 180 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
a Single Mode each 315

b Multi Mode each 373

468 MAT- ELEC- Supply installation testing and commissioning of SC
04163 7.1.8 Pigtails LSZH 2mtr for fiber core connectivity.
Makes: As per list of recommended brands as
Category I.
a Single Mode each 420

b Multi Mode each 520

469 ELEC- Supply installation testing and commissioning of Indoor Multimode
7.1.9 [62.5/125um] glass Fiber Optic Cable as per latest amendments of TIA
/EIA 568 B.3, GR 409 CORE / UL listed NEC 770 Standards in existing
raceways/ PVC Conduits/ slotted channels including making
Terminations to active passive equipment with ferruling at both ends for
identification with necessary tools for Terminations and testing required.
Makes: As per list of recommended brands as Category I.
MAT- a 4 fiber 95
04164
MAT- b 6 fiber 120
04165
MAT- c 12 fiber 210
04166
470 ELEC- Supply installation testing and commissioning of Indoor Single mode
7.1.9A [9/125um ] glass Fiber Optic Cable as per latest amendments of TIA /EIA
568B.3 , GR 409 CORE / UL listed NEC 770 Standards in existing
Raceways/PVC Conduits/ slotted channels including making
Terminations to active passive equipment with ferruling at both ends for
identification with necessary tools for Terminations and testing required
Makes: As per list of recommended brands as Category I.
4 fiber 90
6 fiber 110
12 fiber 150

Page 181 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
471 ELEC- Supply installation testing and commissioning Outdoor, steel tape
7.1.10 armoured multimode [62.5/125um ] glass Fiber Optic Cable as per latest
amendments of TIA /EIA 568B.3 , GR 20 CORE/ UEC 794-1/ EN 187000
Standards in existing MSPVC Conduits/ hume pipe including making
terminations to active passive equipment with ferruling at both ends for
identification with necessary tools for Terminations and testing required.
Makes: As per list of recommended brands as Category I.
MAT- a 4 fiber 108
04167
MAT- b 6 fiber 133
04168
MAT- c 12 fiber 220
04169
472 ELEC- Supply installation testing and commissioning Outdoor, steel tape
7.1.10 A armoured Single mode [9/125um] glass Fiber Optic Cable as per latest
amendments of TIA /EIA 568B.3 , GR 20 CORE/ UEC 794-1/ EN 187000
Standards in existing MSPVC Conduits/ hume pipe including making
terminations to active passive equipment with ferruling at both ends for
identification with necessary tools for Terminations and testing required
Makes: As per list of recommended brands as Category I.
4 fiber 55
6 fiber 65
12 fiber 76
473 MAT- ELEC- Supply, Installation and Testing and commissioning mtr 1800
04170 7.1.11 of indoor 1 pair multimode [62.5/125um ] glass Fiber
Optic Patch Cords of One mtr length as per latest
amendments of TIA /EIA 568B.3 and IEC 794
Standard Specifications including ST II / SC/FC/MT/
PC connectors at both ends as per requirements.
Makes: As per list of recommended brands as
Category I.
474 ELEC- Supply, Installation and Testing and commissioning mtr 1790
7.1.11A of indoor 1 pair Singlemode [9/125um ] glass Fiber
Optic Patch Cords of One mtr length as per latest
ammendments of TIA/EIA 568B.3 and IEC 794
Standard Specifications including ST II /
SC/FC/MT/PC connectors at both ends as per
requirements
Makes: As per list of recommended brands as

Page 182 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Category I.

475 ELEC- Supply, Installation Testing and commissioning of 19 " Rack

7.1.12 mounted/surface mounted aluminum / CRS powder coated multimode
glass Fiber Optic Cable Patch panel/ LIU(upgradable to intelligent panels
with use of sensor strips) along with cable tray/ fiber management
system , adapters for ST II/ SC/FC/MT/PC/LC connections including
making connections to active / passive equipment with ferruling at both
ends for identification with necessary tools for Terminations and testing
required.
Makes: As per list of recommended brands as Category I.
MAT- a 8 Ports 1 No 7334
04171
MAT- b 12 Ports 1 No 9601
04172
MAT- c 24 Ports 1 No 18169
04173
MAT- d 36 Ports 1 No 20535
04174
476 ELEC- Supply, Installation Testing and commissioning of 19 " Rack
7.1.12 A mounted/surface mounted aluminum / CRS powder coated Single mode
glass Fiber Optic Cable Patch panel/ LIU(upgradable to intelligent panels
with use of sensor strips) along with cable tray/ fiber management
system , adapters for ST II/ SC/FC/MT/PC/LC connections including
making connections to active / passive equipment with ferruling at both
ends for identification with necessary tools for Terminations and testing
required.
Makes: As per list of recommended brands as Category I.
a 8 Ports 1 No 7334
b 12 Ports 1 No 9601
c 24 Ports 1 No 18169
d 36 Ports 1 No 20535

Page 183 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
477 ELEC- Supply, Installation, Testing and Commissioning of Rack mounted 19",
7.1.13 Cat 6 UTP,1.5-1.6 MM CRS chasis, powder coated Modular Patch
Panels (upgradable to intelligent panels with use of sensor strips) with
collapsible shutters on jacks to support latest amendments of TIA / EIA
Cat 6 Specifications in Existing Communication Rack along with
necessary connections of Cat 6 UTP Cables, With Rear Cable
management trays and clamps.
Makes: As per list of recommended brands as Category I..

MAT- a 6 Ports 1 No 4138

04175
MAT- b 12 Ports 1 No 5136
04176
MAT- c 18 Ports 1 No 6420
04177
MAT- d 24 Ports 1 No 7847
04178
478 ELEC- Supply, Installation, Testing and Commissioning of Wall mounted
7.1.14 Communication rack in one section with glass doors, swing handles, lock,
Top and Bottom Cable entries, supports for mounting rack on wall, Cable
managers, Fan tray with 2 x 230 Volt fans, Equipment mounting
hardware, wire managers, power supply box for supplying power to hubs,
fans etc., along with earth continuity kit, MCB, indicator, moulded power
supply cable, Blank panels, sliding shelves etc.
Makes: As per list of recommended brands as Category I.

MAT- a 6 U(44 mm ) wall mounted 1 No 8299

04179
MAT- b 9 U(44 mm ) wall mounted 1 No 9819
04180
MAT- c 12 U(44 mm ) wall mounted 1 No 9945
04181
MAT- d 15 U(44 mm ) wall mounted 1 No 10988
04182

Page 184 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
479 ELEC- Supply, Installation, Testing and Commissioning of Floor mounted
7.1.15 communication rack in on Section with glass doors, swing handles, lock
on both doors, Top and Bottom Cable entries with gland plates, Castor
with brakes , 7 no Cable managers, 1 no Fan tray with 2 x 230 Volt fans,
Equipment mounting hardware, wire managers, power supply box for
supplying power to hubs, fans etc., along with earth continuity kit, MCB,
indicator, moulded power supply cable, Blank panels of 1u / 2 u, sliding
shelves. Frame of communication rack should be made of heavy grade
Aluminum profile PS grey painted and panels should be made from
CRCA steel 18 SWG RS
Beige painted.
Makes: As per list of recommended brands as Category I.

MAT- a 22 U (44 mm) Floor Standing Rack 1 No 35989

04183
MAT- b 27 U (44 mm) Floor Standing Rack 1 No 42228
04184
MAT- c 36 U (44 mm) Floor Standing Rack 1 No 58095
04185
MAT- d 42 U (44 mm) Floor Standing Rack 800WX1000D 1 No 60970
04186
MANAGEBLE NET WORK SWITCHES
480 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 30600
04187 7.1.16 Small Business 24 port Gigabit Managed Switch.
Makes: As per list of recommended brands as
Category I.
481 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 76000
04188 7.1.17 Small Business 48 port Gigabit Managed Switch.
Makes: As per list of recommended brands as
Category I.
482 MAT- ELEC- Supply & Fixing of small business 8 port Gigabit 1 No 25200
04189 7.1.18 POE Managed Switch.
Makes: As per list of recommended brands as
Category I..
483 MAT- ELEC- Supply & Fixing of small business 24 port Gigabit 1 No 45900
04190 7.1.19 POE Managed Switch.
Makes: As per list of recommended brands as
Category I.

Page 185 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
484 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No deleted
04191 7.1.20 Small Business 24 port Gigabit Managed Switch
Makes: As per list of recommended brands as
Category I..
485 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 80,910
04192 7.1.21 Layer2, Catalyst 1000 24T-4G-L 24GE port,
10/100/1000 4X 1G SFP Uplink Ports, LAN base
Manageable Network switch.
Makes: As per list of recommended brands as
Category I..
486 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 113400
04193 7.1.22 Layer2, Catalyst 1000 48T-4G-L 48GE port,
10/100/1000 4 X1 G SFP Uplink Ports LAN base
Manageable Network switch.
Makes: As per list of recommended brands as
Category I..
487 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 114300
04194 7.1.23 Layer2, Catalyst 1000 24P-4G-L 24GE port, POE
10/100/1000 4 X 1G SFP Uplink LAN base
Manageable Network switch.
Makes: As per list of recommended brands as
Category I.
488 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 1,82,700
04195 7.1.24 Layer2, Catalyst 1000 48P-4G-L 48GE port, POE
10/100/1000 4 X 1G SFP Uplink LAN base
Manageable Network switch.
Makes: As per list of recommended brands as
Category I.
489 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No Deleted
04196 7.1.25 Layer2, Catalyst 1000 Plus 24 port, GigE LAN base
Manageable Network switch.
Makes: As per list of recommended brands as
Category I.
490 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No Deleted
04197 7.1.26 Layer2, Catalyst 1000 Plus 48 port, GigE LAN base
Manageable Network switch.
Makes: As per list of recommended brands as
Category I.
491 MAT- ELEC- Supply & Fixing of WIFI Access point with mounting 1 No 32175
04198 7.1.27 accessories etc., complete.
Makes: As per list of recommended brands as
Page 186 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Category I.

492 ELEC- Supply, Installation, Testing and Commissioning of 1 No 6,10,900

7.1.28 Layer3, Catalyst 9300L-24T-4G-E 24 GE port,
10/100/1000 4 X 1G SFP Uplink ports LAN base
Manageable Network switch.
Makes: As per list of recommended brands as
Category I.
493 ELEC- Supply, Installation, Testing and Commissioning of 1 No 23000
7.1.29 1G SFP Long Range (Single) Module up to 10KM -
Makes: As per list of recommended brands as
Category I.
Category II
494 ELEC- Supply, laying ,testing and commissioning of 4-pair, Cat6 Solid
7.1.30 Performance verified up to 450 MHZ. support 1Gbps with Cross (+) filler
pair separator & FRPVC sheath 23 AWG, STP/UTP Cable , Meets or
exceeds ANSI/TIA-568-C.2 and ISO/IEC 11801‐1 UL Listed &RoHS
Compliant in the existing raceways /PVC conduits including making
connections to information outlets and patch panels with ferruling at both
ends for identification with necessary tools for punching stripping
crimping and testing required etc., complete.
Makes: As per list of recommended brands as category II.
6 UTP cable RM 34

6 STP cable RM 54

495 ELEC- Supply installation testing and commissioning of Each 630

7.1.31 2nos of Cat6 Unshielded RJ45 Keystones Jack
Punchdown Type with Collapsable Door Exceed
ANSI/ TIA-568-C.2 and ISO/IEC 11801 standards
with 2module face plate for Category 6 component
performance & Compatible to T568A,T568B wiring
pattern and UL-940V0 Rated Plastic &RoHS
Compliant
Makes: As per list of recommended brands as
category II.
496 ELEC- Supply installation testing and commissioning of1no Each 360
7.1.32 of Cat6 Unshielded RJ45 Keystones Jack
Punchdown Type with Collapsable Door Exceed
ANSI/ TIA-568-C.2 and ISO/IEC 11801 standards
Page 187 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
with 1module face plate for Category 6 component
performance & Compatible to T568A, T568B wiring
pattern and UL-940V0 Rated Plastic &RoHS
Compliant
Makes: As per list of recommended brands as
category II.
497 ELEC- Supply installation testing and commissioning of 4 pair 24AWG Cat-6
7.1.33 UTP, flexible, double ended patch cords LSZH along with 2 nos of RJ 45
connectors with strain relief boots Compatible to T568A, T568B
specifications including making connections to information outlets
Makes: As per list of recommended brands as category II.
1 mtr / 3 ft pacth cord Each 189
2 mtr /7 ft patch cord Each 223
3 mtr /10 ft patch cord Each 258

498 ELEC- Supply installation testing and commissioning of LC

7.1.34 Pigtails LSZH 1mtr for fiber core connectivity
Makes: As per list of recommended brands as
category II.
Single Mode Each 217

Multi Mode Each 270

499 ELEC- Supply installation testing and commissioning of SC

7.1.35 Pigtails LSZH 1mtr for fiber core connectivity.
Makes: As per list of recommended brands as
category II.
Single Mode Each 303
Multi Mode Each 370
500 ELEC- Supply installation testing and commissioning of LC
7.1.36 Pigtails LSZH 2mtr for fiber core connectivity.
Makes: As per list of recommended brands as
category II.
Single Mode Each 236
Multi Mode Each 280

501 ELEC- Supply installation testing and commissioning of SC

7.1.37 Pigtails LSZH 2mtr for fiber core connectivity.
Makes: As per list of recommended brands as
Page 188 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
category II.
Single Mode Each 315

Multi Mode Each 390

502 ELEC- Supply installation testing and commissioning of Indoor Multimode
7.1.38 [62.5/125um] glass Fiber Optic Cable HDPE as per latest amendments of
TIA /ANSI/ 568 B.3, GR 20 CORE / UL listed NEC 770 Standards in
existing raceways/ PVC Conduits/ slotted channels including making
Terminations to active passive equipment with ferruling at both ends for
identification with necessary tools for Terminations and testing required.
Makes: As per list of recommended brands as category II.
4 fiber Each 72
6 fiber Each 86
12 fiber Each 120
503 ELEC- Supply installation testing and commissioning of Indoor Single mode
7.1.39 [9/125um] glass Fiber Optic Cable HDPE as per latest amendments of
TIA /ANSI/ 568 B.3, GR 20 CORE / UL listed NEC 770 Standards in
existing raceways/ PVC Conduits/ slotted channels including making
Terminations to active passive equipment with ferruling at both ends for
identification with necessary tools for Terminations and testing required.
Makes: As per list of recommended brands as category II.
4 fiber Each 65

6 fiber Each 80

12 fiber Each 110

504 ELEC- Supply installation testing and commissioning Outdoor, steel tape
7.1.40 armoured multimode[62.5/125um ] glass Fiber Optic Cable HDPE as per
latest amendments of TIA /EIA 568B.3 , GR 20 CORE/ UEC 794-1/ EN
187000 Standards in existing MSPVC Conduits/ hume pipe including
making terminations to active passive equipment with ferruling at both
ends for identification with necessary tools for Terminations and testing
required.
Makes: As per list of recommended brands as category II.
4 fiber Each 80
6 fiber Each 90
12 fiber Each 160

Page 189 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
505 ELEC- Supply installation testing and commissioning Outdoor, steel tape
7.1.41 armoured Single mode[9/125um] glass Fiber Optic Cable HDPE as per
latest amendments of TIA /EIA 568B.3, GR 20 CORE/ UEC 794-1/ EN
187000 Standards in existing MSPVC Conduits/ hume pipe including
making terminations to active passive equipment with ferruling at both
ends for identification with necessary tools for Terminations and testing
required.
Makes: As per list of recommended brands as category II.
4 fiber Each 40

6 fiber Each 48

12 fiber Each 57
506 ELEC- Supply, Installation and Testing and commissioning Each 1300
7.1.42 of indoor 1 pair multimode [62.5/125um ] glass Fiber
Optic Patch Cords of three mtr length as per latest
amendments of TIA /EIA 568B.3 and IEC 794
Standard Specifications including ST II / SC/FC/MT/
PC connectors at both ends as per requirements.
Makes: As per list of recommended brands as
category II.
507 ELEC- Supply, Installation and Testing and commissioning Each 1250
7.1.43 of indoor 1 pair Single mode [9/125um ] glass Fiber
Optic Patch Cords of three mtr length as per latest
amendments of TIA /EIA 568B.3 and IEC 794
Standard Specifications including ST II / SC/FC/MT/
PC connectors at both ends as per requirements.
Makes: As per list of recommended brands as
category II.
508 ELEC- Supply, Installation Testing and commissioning of 19 " Rack
7.1.44 mounted/surface mounted aluminum / Black matt powder coated
multimode glass Fiber Optic Cable Patch panel/ along with cable tray/
fiber management system , adapters for ST II/ SC/LC /MT/PC /LC
connections including making connections Cable management rings are
used to ensure flexibility of pigtails and excess fibers to active / passive
equipment with ferruling at both ends for identification with necessary
tools for Terminations and testing required.
Makes: As per list of recommended brands as category II.
8 Ports Each 5500
12 Ports Each 7200

Page 190 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
24 Ports Each 8260

36 Ports Each 10400

509 ELEC- Supply, Installation Testing and commissioning of 19
7.1.45 " Rack mounted/surface mounted aluminum / Black
matt powder coated Single mode glass Fiber Optic
Cable Patch panel/ along with cable tray/ fiber
management system , adapters for ST II/ SC/LC
/MT/PC connections including making connections
Cable management rings are used to ensure
flexibility of pigtails and excess fibers to active /
passive equipment with ferruling at both ends for
identification with necessary tools for Terminations
and testing required.
Makes: As per list of recommended brands as
category II.
8 Ports Each 5500

12 Ports Each 7200

24 Ports Each 8260

36 Ports Each 10400

510 ELEC- Supply, Installation, Testing and Commissioning of Rack mounted 19",
7.1.46 UTP Patch Panel is a elegant design patch panel. The panel
has two-piece structure design combined with both 24-port panel and
cable management. The panel has 180-degree punch down design for
convenient network terminations. The panels cable management shelf
ensures proper routing of cables with proper bend radius compliance to
avoid strain relief. Exceeds ANSI/TIA-568-C.2 Standard and supports
1000-Base-T. and clamps.
Makes: As per list of recommended brands as category II.
6 Ports Each 3100

12 Ports Each 3850

18 Ports Each 4500

24 Ports Each 4800

Page 191 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
511 ELEC- Supply, Installation, Testing and Commissioning of Wall mounted
7.1.47 Communication rack in one section with glass doors, swing handles, lock,
Top and Bottom Cable entries, supports for mounting rack on wall, Cable
managers, Fan tray with 2 x 230 Volt fans, Equipment mounting
hardware, wire managers, power supply box for supplying power to hubs,
fans etc., along with earth continuity kit, MCB, indicator, moulded power
supply cable, Blank panels, sliding shelves etc.
Makes: As per list of recommended brands as category II.
6 U(44 mm ) wall mounted Each 7470
9 U(44 mm ) wall mounted Each 8830

12 U(44 mm ) wall mounted Each 8950

15 U(44 mm ) wall mounted Each 9890

512 ELEC- Supply, Installation, Testing and Commissioning of Floor mounted
7.1.48 communication rack in one section with glass doors, swing handles, lock
on both doors, Top and Bottom Cable entries with gland plates, Castor
with brakes , 7 no Cable managers, 1 no Fan tray with 2 x 230 Volt fans,
Equipment mounting hardware, wire managers, power supply box for
supplying power to hubs, fans etc., along with earth continuity kit, MCB,
indicator, moulded power supply cable, Blank panels of 1u / 2 u, sliding
shelves. Frame of communication rack should be made of heavy grade
Aluminum profile PS grey painted and panels should be made from
CRCA steel 18 SWG RS Beige painted
Makes: As per list of recommended brands as category II.
22 U (44 mm) Floor Standing Rack Each 32000

27 U (44 mm) Floor Standing Rack Each 38000

36 U (44 mm) Floor Standing Rack Each 52000

42 U (44 mm) Floor Standing Rack Each 54873

MANAGEBLE NET WORK SWITCHES
513 ELEC- Supply, Installation, Testing and Commissioning of 1 No 20360
7.1.49 Small Business 24 port Gigabit Managed Switch.
Makes: As per list of recommended brands as
category II.

Page 192 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
514 ELEC- Supply, Installation, Testing and Commissioning of 1 No 41000
7.1.50 Small Business 48 port Gigabit Managed Switch.
Makes: As per list of recommended brands as
category II.
515 ELEC- Supply & Fixing of small business 8 port Gigabit 1 No 18599
7.1.51 POE Managed Switch.
Makes: As per list of recommended brands as
category II.
516 ELEC- Supply & Fixing of small business 24 port Gigabit 1 No 27000
7.1.52 POE Managed Switch.
Makes: As per list of recommended brands as
category II.
517 ELEC- Supply, Installation, Testing and Commissioning of 1 No 34000
7.1.53 Layer2, 24GE port 10/100 /1000 + 4 1/10G SFP
Uplink Ports, LAN base Manageable Network switch.
Makes: As per list of recommended brands as
category II.
518 ELEC- Supply, Installation, Testing and Commissioning of 1 No 54300
7.1.54 Layer2, 48GE port 10/100 /1000 + 4 1/10G SFP
Uplink Ports, LAN base Manageable Network
switch..
Makes: As per list of recommended brands as
category II.
519 ELEC- Supply, Installation, Testing and Commissioning of 1 No 48340
7.1.55 Layer2, 24GE port POE 10/100 /1000 + 4 1/10G
SFP Uplink Ports, LAN base Manageable Network
switch. Makes: As per list of recommended brands
as category II.
520 ELEC- Supply, Installation, Testing and Commissioning of 1 No 94580
7.1.56 Layer2, 48GE port POE 10/100 /1000 + 4 1/10G
SFP Uplink Ports, LAN base Manageable Network
switch..
Makes: As per list of recommended brands as
category II.
521 ELEC- Supply, Installation, Testing and Commissioning of 1 No 208978
7.1.57 Layer3, 24 GE port, 10/100/1000 4 X 1G SFP Uplink
ports LAN base Manageable Network switch.
Makes: As per list of recommended brands.

Page 193 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
522 ELEC- Supply & Fixing of WIFI Access point with mounting 1 No 22500
7.1.58 accessories etc., complete.
Makes: As per list of recommended brands as
category II.
523 ELEC- Supply, Installation, Testing and Commissioning of 1 No 8320
7.1.59 1G SFP Long Range (Single) Module up to 10KM -
Makes: As per list of recommended brands as
category II..
524 ELEC- Supply, Installation, Testing and Commissioning of 1 No 9800
7.1.60 Small Business 8 port Gigabit Un managed Switch.
Makes: As per list of recommended brands as
category II.
525 ELEC- Supply, Installation, Testing and Commissioning of 1 No 12700
7.1.61 Small Business 16 port Gigabit Un managed Switch.
Makes: As per list of recommended brands as
category II.
526 ELEC- Supply, Installation, Testing and Commissioning of 1 No 13900
7.1.62 Small Business 24 port Gigabit Un managed Switch.
Makes: As per list of recommended brands as
category II.
527 ELEC- Supply and fixing of 8 PoE 10/100/1000 ports + 2 1 No 20520
7.1.63 Gigabit SFP ports with 175W Web Smart Switch.
Makes: As per list of recommended brands.
528 ELEC- Supply and fixing of 24 PoE 10/100/1000 ports + 2 1 No 31050
7.1.64 Gigabit SFP ports up to 250W Web Smart Switch.
Makes: As per list of recommended brands
529 ELEC- Supply Installation Testing and commissioning of Each 4500
7.1.65 High-Speed HDMI male to male cable of length.
Makes: As per list of recommended brands
5 Mtr Each 3250
10 Mtr Each 6500
25 Mtr Each 16250
530 ELEC- Supply, installation, testing and commissioning of Nos 5500
7.1.66 Wi-fi router.
Makes: As per list of recommended brands.
531 ELEC- Supply and laying of 2 mtr. HDMI- HDMI Patch Nos 3800
7.1.67 Cords.
Makes: As per list of recommended brands.
Page 194 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
532 ELEC- Supply and laying of USB Cable
7.1.68 Makes: As per list of recommended brands.
2 Mtr Nos 570
10 Mtr Nos 1520
533 ELEC- Supply and laying of 2 mtr. VGA-VGA Patch Cords. Nos 4180
7.1.69 Makes: As per list of recommended brands.
8 Ports SC Type
12 Ports SC Type
24 Ports SC Type
7.2 RACEWAYS AND JUNCTION BOXES
534 ELEC- Supply of …………G I Raceways of 2mm thick with top cover and
7.2.1 required hardware etc complete.
MAT- a 100mm x 38mm 1 Mtr 549
04199
MAT- b 150mm x 38mm 1 Mtr 722
04200
MAT- c 300mm x 38mm 1 Mtr 1225
04201
MAT- d 100mm x 25mm 1 Mtr 510
04202
MAT- e 150mm x 25mm 1 Mtr 667
04203
MAT- f 300mm x 25mm 1 Mtr 1201
04204
535 ELEC- Supply of …………..G.I. Junction box of 2mm thick for direct acces to
7.2.2 cables at the inter section of Raceways.
MAT- a 172mm x 52mm 1 No 407
04205
MAT- b 222mm x 52mm 1 No 516
04206
MAT- c 372mm x 52mm 1 No 959
04207
7.3 COMPUTERS, PRINTERS AND SCANNERS

Page 195 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
536 MAT- ELEC- Supply, Transportation and installation of Desktop 1 No 76500
04208 7.3.1 with fully loaded software as desired, with the
following configuration.
1. Processor: Intel® Core™ i7-12th Generation or
Higher version Processor with Intel® HD Graphics
770 (2.9 GHz base frequency, up to 4.9 GHz with
Intel® Turbo Boost Technology, 25 MB L3 cache, 12
cores 20 threads) Intel Q670 Chipset
2. Memory: 8 GB DDR4-3200 MHz SDRAM (1 x 8
GB) memory slots 2 DIMM
3. Hard drive 512GB SSD (Hard Drive 2 nd 1 TB
7200 SATA HDD )
4. 1 audio line in; 1 audio line out; 1 HDMI; 1 RJ-45;
1 VGA; 4 USB 3.0; 4 USB 2.0
5. Operating Systems: Windows 11 Pro professional
64 bit with product key License.
6. communications (intel Wi-Fi & Blue tooth)
7. Preloaded with latest version of Antivirus
Symantec/ McAfee / NOD32 / e-Trust / Avast
Internet Security / Kaspersky / Quick heal / eScan /
Msecure with following features: Antivirus,
Antispyware, intrusion Prevention Browser protection
with single management console with 3 year
subscription with support updates and patches.
8. Accessories: With required connecting cables and
driver media should be supplied.
9. Warranty: 3 Year Standard On-Site
Comprehensive Hardware Warranty (including O.S
support, Spares- Parts/Service/Labour/On-site)
Makes: As per list of recommended brands.

Page 196 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
537 MAT- ELEC- Supply, Transportation and installation of Desktop 1 No 65800
04209 7.3.2 with fully loaded software as desired, with the
following configuration.
1. Processor: Intel® Core™ i5-12th Generation or
Higher version processor with Intel® HD Graphics
770 (2.9 GHz base frequency with Intel® Turbo
Boost Technology, 18 MB cache 6 core 12 threads)
Intel Chipset
2. Memory: 8 GB DDR4-3200 MHz SDRAM (1 x 8
GB)
3. Hard drive 512GB SSD (Hard Drive 2 nd 1 TB
7200 SATA HDD )
4. 1 audio line in; 1 audio line out; 1 HDMI; 1 RJ-45;
1 VGA; 4 USB 3.0; 4 USB 2.0
5. Operating Systems: Windows 11 Pro professional
64 bit with product key License. However, the
product key should be mentioned in the installation
report at the time of installation.
6. communications (intel Wi-Fi & Blue tooth)
7. Preloaded with latest version of Antivirus
Symantec/ McAfee / NOD32 / eTrust / Avast Internet
Security / Kaspersky / Quickheal / eScan / Msecure
with following features: Antivirus, Antispyware,
intrusion prevention Browser protection with single
management console with 3 year subscription with
support updates and patches.
8. Accessories: With required connecting cables and
driver media should be supplied.
9. Warranty: 3 Year Standard On-Site
Comprehensive Hardware Warranty (including O.S
support, Spares- Parts/Service/Labour/On-site)
Makes: As per list of recommended brands.
538 MAT- ELEC- Supply, Transportation and installation of Printer 1 No 13165
04210 7.3.3 Features:
Print technology Laser
Duty cycle (monthly, letter) Up to 5000 pages
Recommended monthly page volume 250 to 2000.
Duty cycle (monthly, A4) Up to 5000 pages print
Print speed black (normal, letter) Up to 15 ppm
Print speed black (normal, A4) Up to 14 ppm
Duplex printing Manual (driver support provided)
PROCESSOR : processor speed 234 MHz
PAPER HANDLING Envelope feeder No
Paper trays, maximum 1 (plus single-sheet priority
Page 197 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
input slot)
Makes: As per list of recommended brands.

539 MAT- ELEC- Supply, Transportation and installation of All-in-One 1 No 24805

04211 7.3.4 (Print, Copy, Scan) with duplex, auto document
feeder features:
-Print Resolution 600 x 600dpi
-Print Speed (A4) 27ppm
-Auto Duplex Printing Standard
-Available Paper Size for Auto Duplex Print A4,
Letter, Legal (*1), Indian Legal, Fulllscape
-COPY Copy Speed (A4) 27ppm
Maximum Number of Copies Up to 999 copies
Scan Type Colour Contact Image Sensor
Scan Resolution Optical Up to 600 x 600dpi
Pull Scan Yes, USB and Network
Makes: As per list of recommended brands.
540 MAT- ELEC- Supply, Transportation and installation of Document 1 No 42338
04212 7.3.5 Scanner
Features:
upto 30ppm/60ipm at 300dpi
paper size A8 to A4/Legal
256MB memory
upto 1200X1200 dpi resolution
50pages ADF input capacity
upto 3000 pgs daily duty cycle
USB 2.0 Host & Gigabit Lan Port
Makes: As per list of recommended brands.
541 MAT- ELEC- Supply of 5 Pair telephone copper wire. 100 3479
04213 7.3.6 Makes: As per list of recommended brands. Mtrs

542 MAT- ELEC- Supply of 100 pair MDF loaded with 2/10 Modular. 1 No 4029
04214 7.3.7 Makes: As per list of recommended brands.
543 MAT- ELEC- Supply of 100 Pair raiser cable for telephone. 1 Mtr 424
04215 7.3.8 Makes: As per list of recommended brands.
544 MAT- ELEC- Supply of 10 Pair telephone Copper wire. 1 Mtr 49
04216 7.3.9 Makes: As per list of recommended brands.
545 MAT- ELEC- Supply of 20 Pair telephone Copper wire. 1 Mtr 98
04217 7.3.10 Makes: As per list of recommended brands.
546 MAT- ELEC- Supply of 50 Pair telephone Copper wire. 1 Mtr
04218 7.3.11 Makes: As per list of recommended brands. 244
Page 198 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
547 MAT- ELEC- Supply of 10 pair Telephone distribution box with 1 No 714
04219 7.3.12 back mount frame, krone connector, powder coated
metal body with lock and key arrangement.
548 MAT- ELEC- Supply of 20 pair Telephone distribution box with 1 No 1089
04220 7.3.13 back mount frame, krone connector, powder coated
metal body with lock and key arrangement.
549 MAT- ELEC- Supply of 50 pair Telephone distribution box with 1 No 2269
04221 7.3.14 back mount frame, krone connector, powder coated
metal body with lock and key arrangement.
550 MAT- ELEC- Supply of 200 pair Telephone distribution box with 1 No 8664
04222 7.3.15 back mount frame, krone connector, powder coated
metal body with lock and key arrangement.
551 ELEC- Supply, Installation, Testing and commissioning of Each 495
7.3.16 Non caller ID push button Telephone instruments
etc., complete with connectors.
Makes: As per list of recommended brands
552 ELEC- Supply, Installation, Testing and commissioning of Each 19700
7.3.16 60.45cm (23.8”) FHD (1920X1080) monitor with
adjustable stand/ vesa mountable with IPS panel
1VGA1USB with HD CP support.
Makes: As per list of recommended brands
EPABX SYSTEM
7.4 SMALL SYSTEM

Page 199 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
553 MAT- ELEC- Supply, Installation, testing and Commissioning of IP 1 No 104665
05554 7.4.1 Based digtal Telephone (EPABX) system -----
complied with following specifications:
> IP @ Core, PCM/TDM, Non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and Ios)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt 8 Channel Auto Attendant
> Inbuilt Call Details Software with search engine
software
> 4 Analog Trunks
> 6 Digital Extensions
> 32 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Expandable to 64 Analog Extensions or more
/ Makes: As per list of recommended brands.
554 MAT- ELEC- Supply, Installation, testing and Commissioning of IP 1 No 114950
05555 7.4.2 Based digtal Telephone (EPABX) system -----
complied with following specifications:
> IP @ Core, PCM/TDM, Non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and Ios)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt 8 Channel Auto Attendant
> Inbuilt Call Details Software with search engine
software
> 4 Analog Trunks
> 6 Digital Extensions
> 48 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Expandable to 64 Analog Extensions or more
Makes: As per list of recommended brands.

Page 200 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
555 MAT- ELEC- Supply, Installation, testing and Commissioning of IP 1 No 128018
05556 7.4.3 Based digtal Telephone (EPABX) system -----
complied with following specifications:
> IP @ Core, PCM/TDM, Non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and Ios)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt 8 Channel Auto Attendant
> Inbuilt Call Details Software with search engine
software
> 4 Analog Trunks
> 1 ISDN PRI Module
> 6 Digital Extensions
> 48 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Expandable to 64 Analog Extensions or more
Makes: As per list of recommended brands.

556 MAT- ELEC- Supply, Installation, testing and Commissioning of IP 1 No 131890

05557 7.4.4 Based digital Telephone (EPABX) system -----
complied with following specifications:
> IP @ Core, PCM/TDM, Non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and Ios)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt 8 Channel Auto Attendant
> Inbuilt Call Details Software with search engine
software
> 4 Analog Trunks
> 6 Digital Extensions
> 64 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Expandable to 64 Analog Extensions or more
Makes: As per list of recommended brands.

Page 201 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
557 MAT- ELEC- Supply, Installation, testing and Commissioning of IP 1 No 143990
05558 7.4.5 Based digtal Telephone (EPABX) system -----
complied with following specifications:
> IP @ Core, PCM/TDM, Non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and Ios)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt 8 Channel Auto Attendant
> Inbuilt Call Details Software with search engine
software
> 4 Analog Trunks
> 1 ISDN PRI Module
> 6 Digital Extensions
> 64 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Expandable to 64 Analog Extensions or more
Makes: As per list of recommended brands.
558 MAT- ELEC- Supply and installation of Analog Extension Card 1 No 17545
05559 7.4.6 (with Caller ID) 8 extensions.
559 MAT- ELEC- Supply and installation of Analog Extension Card 1 No 22990
05560 7.4.7 (with Caller ID) 16 extensions.
560 MAT- ELEC- Supply and installation of Analog Trunk Card (with 1 No 19481
05561 7.4.8 Caller ID) 4 trunks.
561 MAT- ELEC- Supply and installation of Analog Trunk Card (with 1 No 24200
05562 7.4.9 Caller ID) 8 trunks.
562 MAT- ELEC- Supply and installation of Digital Extension Card for 1 No 22627
05563 7.4.10 8 digital extensions:
563 MAT- ELEC- Supply and installation of Digital Extension Card for 1 No 38115
05564 7.4.11 16 digital extensions:
564 MAT- ELEC- Supply and installation of E1 Trunk Card or PRI 1 No 57173
05565 7.4.12 Card
30 ISDN PRI or R2 trunk channels.

7.5 LARGE SYSTEM 1 No

Page 202 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
565 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 288706
05566 7.5.1 IP Based digital Telephone (EPABX) system--
complied with following specifications:
> IP @ Core, PCM/TDM switching, non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and IOs)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt Call Details Software with search engine
software
> 8 Analog Trunks
> 8 Digital Extensions
> 96 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Expandable to 220 Ports wired or more at extra
cost
Makes: As per list of recommended brands.
566 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 436810
05567 7.5.2 IP Based digital Telephone (EPABX) system--
complied with following specifications:
> IP @ Core, PCM/TDM switching, non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and IOs)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt Call Details Software with search engine
software
> 8 Analog Trunks
> 1 PRI Trunk module
> 8 Digital Extensions
> 128 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Expandable to 220 Ports wired or more at extra
cost
Makes: As per list of recommended brands.

Page 203 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
567 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 526350
05568 7.5.3 IP Based digital Telephone (EPABX) system--
complied with following specifications:
> IP @ Core, PCM/TDM switching, non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and IOs)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt Call Details Software with search engine
software
> 8 Analog Trunks
> 1 PRI Trunk module
> 8 Digital Extensions
> 160 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Inbuilt hot standby for CPU and PSU.
> Compatibility to run on DC -48v source.
> Expandable to 220 Ports wired or more at extra
cost.
Makes: As per list of recommended brands.

568 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 733260

05569 7.5.4 IP Based digital Telephone (EPABX) system--
complied with following specifications:
> IP @ Core, PCM/TDM switching, non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and IOs)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt Call Details Software with search engine
software
> 8 Analog Trunks
> 1 PRI Trunk module
> 16 Digital Extensions
> 224 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Inbuilt hot standby for CPU and PSU.
> Compatibility to run on DC -48v source.
> Expandable to 400 Ports wired or more at extra
cost.
Page 204 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Makes: As per list of recommended brands.
569 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1 No 849420
05570 7.5.5 IP Based digital Telephone (EPABX) system--
complied with following specifications:
> IP @ Core, PCM/TDM switching, non-blocking,
> Must Support PRI, E1, Analog Junctions
> Must Support PC Console,
> Must support Mobile SIP (Android and IOs)
> Must support Voice Mail
> Must support Card based GSM
> Inbuilt Call Details Software with search engine
software
> 8 Analog Trunks
> 1 PRI Trunk module
> 16 Digital Extensions
> 304 Analog Extensions
> 1 Digital Key Phone with minimum 16 Keys (Must
work only on 2 wires)
> Inbuilt hot standby for CPU and PSU.
> Compatibility to run on DC -48v source.
> Expandable to 400 Ports wired or more at extra
cost.
Makes: As per list of recommended brands.
570 MAT- ELEC- Supply and Installation of Analog Extension Card 1 No 24079
05571 7.5.6 (with Caller ID) 16 extensions.
571 MAT- ELEC- Supply and Installation of Analog Trunk Card (with 1 No 24079
05572 7.5.7 Caller ID) 8 trunks.
572 MAT- ELEC- Supply and Installation of Digital Extension Card for 1 No 24079
05573 7.5.8 8 digital extensions:
573 MAT- ELEC- Supply and Installation of Digital Extension Card for 1 No 39567
05574 7.5.9 16 digital extensions:
574 MAT- ELEC- Supply and Installation of E1 Trunk Card or PRI 1 No 59411
05575 7.5.10 Card
30 ISDN PRI or R2 trunk channels.
575 MAT- ELEC- Supply and Installation of IP CPU card for 1 No 43318
05576 7.5.11 redundancy purpose
576 MAT- ELEC- Supply and Installation of PSU card for redundancy 1 No 26378
05577 7.5.12 purpose
577 MAT- ELEC- Supply and Installation of Digital Key Telephone with 1 No 10164
05578 7.5.13 2-line display, 10 programmable keys, handsfree
Page 205 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
dialing.
578 MAT- ELEC- Supply and Installation of Digital Key Telephone with 1 No 17787
05579 7.5.14 2-line display, 16 programmable keys, fully
handsfree talk back.
579 MAT- ELEC- Supply and Installation of IP Gateway card for 8 1 No 50215
05580 7.5.15 channels
580 MAT- ELEC- Supply and Installation of IP Gateway card for 16 1 No 72600
05581 7.5.16 channels
581 MAT- ELEC- Supply and Installation of SIP extensions licenses 1 No 5143
05582 7.5.17 pack (5 SIP extensions)
582 MAT- ELEC- Supply and Installation of SIP extensions licenses 1 No 9015
05583 7.5.18 pack (10 SIP extensions)
583 MAT- ELEC- Supply and Installation of IP phone with POE. 1 No 20328
05584 7.5.19
584 MAT- ELEC- Supply and Installation of 4 port GSM card 1 No 52998
05585 7.5.20
585 MAT- ELEC- Supply and Installation of Expansion cabinet for 220 1 No 100430
05586 7.5.21 more extensions
586 MAT- ELEC- Supply and Installation of 100 Pair MDF along with 1 No 16214
05587 7.5.22 IPM
C.C.TV & SURVEILLANCE SYSTEM
587 ELEC- Supply, Installation, Testing and Commissioning of Each 101790
7.6.1 32CH Embedded 4K NVR 4SATA expandable up to
40TB, audio input & Output, Two way
communication supported, G7.11 audio format
support, 320Mb recording throughput, 16 alarm
inputs & 4 Outputs, RS485, Esata and RS232 to be
supported with maximum 16 users, Op. temp -10 to
50 deg. C, NDAA compliant, UL/CE/FCC certified.
Makes: As per list of recommended brands as
Category I.
588 ELEC- Supply, Installation, Testing and Commissioning of Each 50310
7.6.2 16CH Embedded 4K NVR 2SATA expandable up to
20TB, audio input & Output, Two way
communication supported, G7.11 audio format
support, 128Mb recording throughput, 8 alarm inputs
& 1 Output, RS485, HDMI, VGA ports to be
supported with maximum 16 users, Op. temp -10 to
Page 206 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
50 deg. C, NDAA compliant, UL/CE/FCC certified.
Makes: As per list of recommended brands as
Category I.
589 ELEC- Supply, Installation, Testing and Commissioning of Each 35046
7.6.3 8CH Embedded 4K NVR 1SATA expandable up to
10TB, audio input & Output, Two way
communication supported, G7.11 audio format
support, 64Mb recording throughput, 4 alarm inputs
& 1 Output, RS485, HDMI, VGA ports to be
supported with maximum 16 users, Op. temp -10 to
50 deg. C, NDAA compliant, UL/CE/FCC certified.
Makes: As per list of recommended brands as
Category I.
590 ELEC- Supply, Installation, Testing and Commissioning of Each 13800
7.6.4 4MP or higher IR Dome, Fixed lens min 2.8mm DC
Iris, 1/2.7" progressive CMOS image sensor, Min.
Illumination 0.005 (color), S/N Ratio: 50dB,
Electronics Shutter: 1/8 ~ 1/32000, IR Distance:
30M, with built in video analytics
,WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0
~100%; SD card up to 256GB, PAN: 0-355, Tilt: 0-
75, Rotation: 0-354; Video Compression: H.265
HEVC/H.264/MJPEG, Smart Codec; Triple Stream;
Protocals: H.265 HEVC/H.264/MJPEG, Smart
Codec; ONVIF: S/G/T; Op. Temp: -40 to 60 Deg;
power consumption max. 6W;
IP67,IK10,UL,NDAA,BIS Compliance.
Makes: As per list of recommended brands as
Category I.
591 ELEC- Supply, Installation, Testing and Commissioning of Each 14200
7.6.5 4MP or higher IR Bullet, Fixed lens min 2.8mm DC
Iris, 1/2.7" progressive CMOS image sensor, Min.
Illumination 0.005 (color), S/N Ratio: 50dB,
Electronics Shutter: 1/8 ~ 1/32000, IR Distance:
30M, with built in video analytics
,WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0
~100%; SD card up to 256GB, PAN: 0-355, Tilt: 0-
75, Rotation: 0-354; Video Compression: H.265
HEVC/H.264/MJPEG, Smart Codec; Triple Stream;
Protocals: H.265 HEVC/H.264/MJPEG, Smart
Codec; ONVIF: S/G/T; Op. Temp: -40 to 60 Deg;
power consumption max. 6W;
IP67,IK10,UL,NDAA,BIS Compliance accessories
Page 207 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
mounts to be considered.
Makes: As per list of recommended brands as
Category I.
592 ELEC- Supply, installation, Testing and Commissioning of Each 1,18,000
7.6.6 IP IR PTZ Camera- 2MP 32x Network PTZ Dome
Camera Max. 2megapixel (1920 x 1080) resolution,
4.44 ~ 142.6mm (Optical 32x) lens, Max. IR viewable
length : 200m (656ft), Day & Night (ICR), WDR
(150dB), DIS (Built-in gyro sensor), 1/2.8’’
Progressive Scan CMOS, Intelligent Video / Audio
Analytics, Intrusion Detection and Motion Detection,
Shock detection, Azimuth display (Cardinal &
intermediate directions),Multiple streaming, Wise
Stream II support H.265, H.264, MJPEG codec
support MicroSD / SDHC / SDXC memory 2 slots
(Up to 512 GB) IP66, IK10 UL Certified PTZ Camera
along with pole/wall mount L-bracket for Mounting,
Power Adapter, IP66, TVS 4,000V Lightning
Protection, Surge Protection and Voltage Transient
Protection etc.
Makes: As per list of recommended brands as
Category I.
593 ELEC- Supply and fixing of Surveillance HDD-4 TB. Each 20520
7.6.7 Makes: As per list of recommended brands.
594 ELEC- Supply and installation of 4K UHD, 55” LED Display Each 95230
7.6.8 complete with following Specifications:
a) Diagonal Size 55"
b) Type Edge LED BLU.
c) Resolution 3840*2160 (4K UHD)
d) Pixel Pitch(mm)0.105 x 0.315.
e) Active Display Area(mm)1209.6(H) x 680.4(V)
f) Brightness (Typ.) 350 nit.
g) Contrast Ratio 4000:1.
Makes: As per list of recommended brands
595 ELEC- Supply and installation of 24 inch (60.96cm) Full HD Each 16950
7.6.9 LED Monitor with Wall Mountable Stand, Height
Adjustable, HDMI and VGA Ports with all
accessories.
Makes: As per list of recommended brands
596 ELEC- Installation, testing, Commissioning & Integration of Each 12000
7.6.10 CCTV system in Control room including mobile Job
configuration and communication of entire system as
Page 208 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
per the directions of Engineer-in-Charge.
Note: The above charges for Installation, testing,
Commissioning & Integration of CCTV system in
Control room may be given on job work basis for
every 10 cameras or part there of depending upon
size of the building/premises.
Category II
597 ELEC- Supply, Installation, Testing and Commissioning of Each 53100
7.6.11 32CH Embedded 4K NVR 4SATA expandable up to
40TB, audio input & Output, Two way
communication supported, G7.11 audio output
support, 320Mb recording throughput, Op. temp -10
to 50 deg. C, NDAA compliant, UL/CE/FCC/BIS
certified./BIS
Makes:- As per list of recommended brands as
Category II
598 ELEC- Supply, Installation, Testing and Commissioning of Each 15156
7.6.12 16CH Embedded 4K NVR 2SATA expandable up to
20TB, audio input & Output, Audio out
putcommunication supported, G7.11 audio format
support, 128Mb recording throughput, HDMI, VGA
ports to be supported with maximum 16 users, Op.
temp -10 to 50 deg. C, UL/CE/FCC/BIS certified.
Makes:- As per list of recommended brands as
Category II
599 ELEC- Supply, Installation, Testing and Commissioning of Each 7866
7.6.13 8CH Embedded 4K NVR 1SATA expandable up to
10TB, audio Output, Two way communication
supported, G7.11 audio format support, 64Mb
recording throughput, HDMI, VGA ports to be
supported with maximum 16 users, Op. temp -10 to
50 deg. C, NDAA compliant, UL/CE/FCC/BIS
certified.
Makes:- As per list of recommended brands as
Category II
600 ELEC- Supply, Installation, Testing and Commissioning of Each 7000
7.6.14 4MP or higher IR Dome, fixed lens min 2.8mm DC
Iris, 1/2.7" progressive CMOS image sensor, Min.
Illumination 0.005 (color), S/N Ratio: 50dB,
Electronics Shutter: 1/5 ~ 1/10000, IR Distance:
30M, with built in video analytics

Page 209 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
,WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0
~100%; SD card up to 256GB, Video Compression:
H.265 /H.264/MJPEG, Smart Codec; Triple Stream;
Protocals: H.265 /H.264/MJPEG, Smart Codec;
ONVIF: S/G/T; Op. Temp: -30 to 60 Deg; power
consumption max. 6W; IP67,IK10,BIS Compliance.
Makes: - As per list of recommended brands as
Category II
601 ELEC- Supply, Installation, Testing and Commissioning of Each 7200
7.6.15 4MP or higher IR Bullet, fixed lens min 2.8mm DC
Iris, 1/2.7" progressive CMOS image sensor, Min.
Illumination 0.005 (color), S/N Ratio: 50dB,
Electronics Shutter: 1/5 ~ 1/10000, IR Distance:
30M, with built in video analytics
,WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0
~100%; SD card up to 256GB, Video Compression:
H.265 /H.264/MJPEG, Smart Codec; Triple Stream;
Protocals: H.265 /H.264/MJPEG, Smart Codec;
ONVIF: S/G/T; Op. Temp: -30 to 60 Deg; power
consumption max. 6W; IP67,IK10,BIS Compliance.,
Required accessories mounts to be considered.
Makes:- As per list of recommended brands as
Category II
602 ELEC- Supply, installation, Testing and Commissioning of Each 94400
7.6.16 IP IR 2MP PTZ Camera- 32x Network PTZ Dome
Camera Max. 2megapixel (1920 x 1080) resolution,
4.44 ~ 142.6mm (Optical 32x) lens, Max. IR viewable
length : 200m (656ft), Day & Night (ICR), WDR
(150dB), DIS (Built-in gyro sensor), 1/2.8’’
Progressive Scan CMOS, Intelligent Video / Audio
Analytics, Intrusion Detection and Motion Detection,
Shock detection, Azimuth display (Cardinal &
intermediate directions),Multiple streaming, Wise
Stream II support H.265, H.264, MJPEG codec
support MicroSD / SDHC / SDXC memory 2 slots
(Up to 512 GB) IP66, IK10 UL Certified PTZ Camera
along with pole/wall mount L-bracket for Mounting,
Power Adapter, IP66, TVS 4,000V Lightning
Protection, Surge Protection and Voltage Transient
Protection etc.
Makes: As per list of recommended brands as
Category II.
PUBLIC ADDRESS SYSTEMS
Page 210 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
603 ELEC- Supply and Installation of 120Watt Booster Amplifier, Each 19500
7.7.1 the amplifier is protected against overload and short
circuits. A temperature-controlled fan ensures high
reliability at high output levels and low acoustic noise
at lower output levels. An overheat protection circuit
switches off the power stage and activates an LED
on the front panel, if the internal temperature
reaches acritical limit due to poor ventilation or
overload.
Makes: As per list of recommended brands
604 ELEC- Supply and installation testing and commissioning of Each 14200
7.7.2 Tabletop mounted gooseneck type Conference
Delegate unit Loudspeaker volume is set centrally at
the Control Unit for all delegate units. To prevent
acoustic feedback, the built-in loudspeaker is
automatically muted when the microphone is on, the
headphone volume level can be adjusted by means
of a thumbwheel on the unit for maximum comfort,
Nominal Acoustic Input 85dB SPL, Frequency
Response 400Hz to 10kHz, Length of the
microphone from the base of the stem 488mm.
Makes: As per list of recommended brands.
605 ELEC- Supply, Fixing and Installation of Tabletop/Podium Each 16800
7.7.3 mounted gooseneck type Conference Chairman unit
Loudspeaker volume is set centrally at the Control
Unit for all delegate units. To prevent acoustic
feedback, the built-in loudspeaker is automatically
muted when the microphone is on, the headphone
volume level can be adjusted by means of a
thumbwheel on the unit for maximum comfort.
Makes: As per list of recommended brands.
606 ELEC- Supply, Fixing and Installation of Rack mounted Each 29050
7.7.4 Conference Control unit, having digital acoustic
feedback suppression facility that automatically
eliminates acoustic feedback, giving better speech
intelligibility by allowing the speaker volume to be
turned up as loud as required without any risk of
feedback.
Makes: As per list of recommended brands.
607 ELEC- Supply and Installation of Wall mounted 30W Each 5910
7.7.5 Cabinet Loudspeaker, High-fidelity music and
speech reproduction, Selectable 8 ohm, 70 V and

Page 211 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
100 V inputs, Compact yet robust ABS enclosure,
Supplied with adjustable mounting bracket, Complies
with international installation and safety regulations.
Makes: As per list of recommended brands.
608 ELEC- Supply, Fixing and Installation of 4 Channel Mixer, Each 37200
7.7.6 High-fidelity music and speech reproduction,
selectable 8-ohm, 70 V and 100 V inputs, Compact
yet robust ABS enclosure, Supplied with adjustable
mounting bracket, Complies with international
installation and safety regulations.
Makes: As per list of recommended brands.
609 ELEC- Supply and Installation of Wireless Handheld Each 29470
7.7.7 microphone, With the touch of a single button,
ClearScan™ scans through all 32 preset channels
and selects the clearest channel, which ensures
noise-free operation over the longest operating
range. In the increasingly cluttered world of RF,
ClearScan™ gives you confidence that you can
easily find an open frequency.
Makes: As per list of recommended brands.
610 ELEC- Supply and fixing of wireless hand held microphone Each 4650
7.7.8 Having Frequency Response of 40Hz-13kHz etc.,
complete.
Makes: As per list of recommended brands.
611 ELEC- Supply and Installation of Wireless Collar Each 4800
7.7.9 Microphone with Frequency Response of 40Hz-
13kHz etc., complete.
Makes: As per list of recommended brands.
612 ELEC- Supply and Fixing of High fidelity 2-Way wall Each 4635
7.7.10 mountable Speakers with 16W impedance with
power taps of 4W/8W/16W etc., complete.
Makes: As per list of recommended brands.
613 ELEC- Supply, Installation, Testing and Commissioning of Each 1740
7.7.11 speakers with following specifications:12W Wall
mount box Speaker, rated power: 12W, Tapings 100
volt line : 12/6/9WTransformer Impedance, Ohms ,
100V : 1.67k/3.33k/6.66k, Frequency Response : 55-
15,000 Hz SPL at 1kHz (1W/1M) : min 85dB, Color /
Finish : White RAL9016 / Black.
Makes: As per list of recommended brands.
614 ELEC- Supplying, installing, testing and commissioning of Each 27030
Page 212 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
7.7.12 25 zone selector P.A. console and with CRCA sheet
housing and control desk also included with rack
arrangement as required. The console shall have all
call / call back type complete with battery backup
and it should also work on AC single phase power.
(Considered each floor one Zone).
Makes: As per list of recommended brands.
615 ELEC- Supply and Fixing of High fidelity 2-Way wall Each 3980
7.7.13 mountable with 10W impedance with power taps of
1.5W/3W/6W etc., complete.
Makes: As per list of recommended brands.
616 ELEC- Supply and Fixing of Ceiling mount Speakers with Each 3228
7.7.14 6W impedance with power taps of 1.5W/3W/6W etc.,
complete.
Makes: As per list of recommended brands.
617 ELEC- Supply and Laying of Microphone Cables and 1 RM 48
7.7.15 connectors etc., complete.
Makes: As per list of recommended brands.
618 ELEC- Testing and commissioning of the above Public Each 2000
7.7.16 Address systems as required at site. Job
Note: The above charges for Testing and
commissioning of the above Public Address systems
may be given on job work basis for each amplifier
with mixer/each conference hall etc., depending
upon size of the building/premises.
AUDIO-VIDEO SYSTEMS
619 ELEC- Supply and Fixing of Projector for front end Each 70060
7.8.1 Audience, As 4200lm, 5000:1contast ratio,
1080p@50/60Hz and HDMI & VGA interface etc.
complete.
Makes: As per list of recommended brands.
620 ELEC- Supply, installation, testing & commissioning of Each 247000
7.8.2 3LCD / 1DLP laser projector with 4200 ANSI
Lumens brightness, Ultra short throw (0.3 : 1) lens,
Resolution: WXGA (1280 x 800), Colors: 16.7 million
colors, Contrast Ratio: 500,000 : 1, Speaker Output:
16W, Input Ports: 1 x HDMI, 1 x MHL, 2 x VGA, 1 x
composite video, 1 x component video, 1 x 3.5 mm
stereo mini jack, Output: 1 x 3.5 mm stereo mini
jack, 1 x VGA, Wired and wireless network LAN, 1 x

Page 213 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
RS-232 control port.
Makes: As per list of recommended brands.
621 ELEC- Supply, installation, testing & commissioning of Each 129200
7.8.3 3LCD/1DLP laser projector with 3500 ANSI Lumens
brightness, Resolution: WXGA (1280 x 800), Colors:
16.7 million colors, Contrast Ratio: 2,000,000 : 1,
Life: 40,000 hours, Speaker Output: 16W, Input
Ports: 2 x HDMI, 2 x VGA, 1 x composite video, 1 x
component video, 1 x RCA jack, Output: 1 x 3.5 mm
stereo mini jack, 1 x VGA, Wired and wireless
network LAN, 1 x RS-232 control port.
Makes: As per list of recommended brands.
622 ELEC- Supply and Fixing of Celling Mount Kits for Projector Each 10305
7.8.4 etc. complete.
Makes: As per list of recommended brands.
623 ELEC- Supply and fixing of 120" Motorized projection Each 20610
7.8.5 screen with remote control etc. complete.
Makes: As per list of recommended brands.
624 ELEC- Supply and fixing of 55" Full HD LED Large format Each 80060
7.8.6 Display (LFD) Commercial model for 24x7
operations, as 1920 x 1080 (16:9) resolution &
170°/160°(H/V) viewing angle, with HDMI & VGA
Interface etc., complete.
Makes: As per list of recommended brands.
625 ELEC- Supply and Fixing of Celling Mount Kits for front LED Each 11221
7.8.7 etc. complete.
Makes: As per list of recommended brands.
626 ELEC- Supply and fixing of 4-input and 8-output HDMI Each 270300
7.8.8 (High-Definition Multimedia Interface) matrix
Switcher Board with EDID Minder (Interface
switching unit for LFD & Projectors to provide Audio
and Video) etc. complete.
Makes: As per list of recommended brands.
627 ELEC- Supply and fixing of long distance HDMI (High- Each 49440
7.8.9 Definition Multimedia Interface) twisted Pair Pair
Transmitter/Receiver for LED cable for long distance
which contains OFC and converting accessories etc.
complete.
Makes: As per list of recommended brands.
628 ELEC- Supply and fixing of VGA to HDMI Convertor etc. Each 16946

Page 214 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
7.8.10 complete.
Makes: As per list of recommended brands.
629 ELEC- Supply and laying of twisted pair type High-Definition Each 4809
7.8.11 Multimedia Interface cable for long distance which
contains OFC and converting accessories for
multiple connectivity like connectors for Tx & Rx etc.
complete.
Makes: As per list of recommended brands.
630 ELEC- Supply and Fixing of Wireless remote control Laser Each 6320
7.8.12 point Presenter and Slider etc. complete.
Makes: As per list of recommended brands.
631 ELEC- Supply, installation, testing & commissioning of 2.4 Each 38000
7.8.13 GHz Digital Wireless Handheld Microphone with 256
bit, AES Encryption, Frequency Response: 70 Hz–
20 KHz, Dynamic Range: 116 dB @ 1 KHz, Signal-
to-noise: >90 dBA, Latency<=2.9ms along with Up to
12 Hours battery life.
Makes: As per list of recommended brands.
632 ELEC- Supply, installation, testing & commissioning of 2.4 Each 38000
7.8.14 GHz Digital Wireless Lapel Microphone with 256 bit
AES Encryption, Frequency Response: 20 Hz–20
KHz, Dynamic Range: 116 dB @ 1 KHz, Signal-to-
noise: >90 dBA, Latency<=2.9ms along with Up to
12 Hours battery life.
Makes: As per list of recommended brands.
633 ELEC- Supply, installation, testing & commissioning of Each 38000
7.8.15 Gooseneck Microphone with on/off button with Polar
pattern: Cardioid, Frequency range: 70 to 18,000 Hz
, Max. SPL 125 dB, Equivalent noise level: <21 dB‐
A , Signal/noise ratio: >73 dB, Impedance:
<=600 ohms, load impedance >=2,000 ohms,
Connector 3‐pin male XLR.
Makes: As per list of recommended brands.
634 ELEC- Supply, installation, testing & commissioning of Nos 173793
7.8.16 Modular Digital Signal Processor with AEC and
current configuration of minimum 6mic/line inputs
and 4-line outputs, 2 x 2 USB in/out for PC audio,
Dante connectivity and Processor: 40-bit floating
point, Sampling rate: 48kHz, standard Dante digital
audio networking.
Makes: As per list of recommended brands.

Page 215 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
635 ELEC- Supply, installation, testing & commissioning of Nos 44290
7.8.17 Column Line array Speaker with 8 nos. vertically
aligned array of full range speakers with Frequency
Range: 80 Hz – 20 kHz, Sensitivity: 93 dB, Power
Capacity: 100 Watt (400 W Peak), Nominal
Impedance: 8 ohms, Max SPL: 121 dB, Transformer
Tap: 60W, 30W @ 100V, Fiberglass reinforced ABS
cabinet, painted aluminum grille along with Swivel
(pan)/tilt wall bracket.
Makes: As per list of recommended brands.
636 ELEC- Supply, installation, testing & commissioning of Nos 83030
7.8.18 Class D Dual channel Power Amplifier with Power
output: 2 x 240 Watt @ 100v, Frequency response :
50Hz-22kHz, Total harmonic distortion (THD) : <
0.3%, Signal to noise ratio : > 100 dB, Crosstalk (@
1 kHz) < 80 dB along with Dc short circuit,
overheating, over load, signal limiting, temperature
control fan protection.
Makes: As per list of recommended brands.
637 ELEC- Supply, installation, testing & commissioning of 250- Nos 23750
7.8.19 Watt Mixing Amplifier with frequency response 50Hz
to 15kHz +/-3 dB, THD <10%, Inputs: 6 x Mic, 2 x
Aux, 1 x Line inputs, Outputs: 1 x Preamp out & 1 x
Line out, Signal to Noise ratio:70db, with Bass and
treble control.
Makes: As per list of recommended brands.
638 ELEC- Supply, Installation, Testing and Commissioning of Nos 9207
7.8.20 Two way ceiling speaker 4" LF Driver, 0.75" Tweeter,
Power Handling Capacity : 60 Watt continuous
program power, Sensitivity (SPL 1W/1m) : 87
dB, Peak SPL: 108 dB, Frequency Range: 75 Hz –
20 kHz, Coverage : 120° Conical, impedance: 8
ohms, UL / EN certified, along with integrated steel
back can complete as required.
Makes: As per list of recommended brands.
639 ELEC- Supply and fixing of 1600 W, 132 dB peak SPL Each 8879
7.8.21 utilizing high-sensitivity transducers 15" Two-Way
Passive Loudspeaker etc. complete.
Makes: As per list of recommended brands.
640 ELEC- Supply and fixing of 1000 W,126 dB 12" Two-Way Each 7948
7.8.22 Powered Loudspeaker etc. complete.
Makes: As per list of recommended brands.
Page 216 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
641 ELEC- Supply and Fixing of Ultra compact two-way with Each 28033
7.8.23 single 8-inch woofer etc. complete.
Makes: As per list of recommended brands.
642 ELEC- Supply and fixing of 650 W per channel Class-H Each 4358
7.8.24 power amplifier With 2x 450W @ 4 Ohms etc.
complete.
Makes: As per list of recommended brands.
643 ELEC- Supply and Fixing of Pop-up box etc. complete. Each 3570
7.8.25 Makes: As per list of recommended brands.
644 ELEC- Supply and Fixing of XLR connector etc. complete. Each 675
7.8.26 Makes: As per list of recommended brands.
645 ELEC- Supply, Installation, Testing and Commissioning of Nos 64980
7.8.27 Multiformat 3 x 1 automatic transmitter and receiver
with scaler solution, Should support HDCP 2.2 and
auto scaling at output, 4K30 Support for source
devices and displays, Inputs (TX) – Transmitter
includes 2x HDMI and 1x VGA inputs, Outputs(RX) –
Receiver includes 1x HDMI input and scaled HDMI
output , control port: RS-232, 2 x Relay and de-
embedded audio out.
Makes: As per list of recommended brands.
646 ELEC- Supply, Installation, Testing and Commissioning of Nos 77976
7.8.28 4x1 4K60 Presentation Switcher with Inputs: 1 x
VGA with audio, 3 x HDMI, Outputs: 1 x HDBT and 1
x HDMI output, 1 x de-embedded audio out along
with control port: 1 x RS-232, 1 x IR, 1 x contact-in, 1
x tally out and ethernet port.
Makes: As per list of recommended brands.
647 ELEC- Supply, Installation, Testing and Commissioning of Nos 71535
7.8.29 Multi-Format Wall plate Transmitters, Inputs: 1x
HDMI, 1 x VGA, 1 x audio, Output: HdbaseT/ Dxlink
RJ-45, Resolution: 480p up to 1920x1200 @ 60 Hz ,
HDCP Compliant, 3D Support, Analog to Digital
Conversion: 48 kHz Sample Rate, 24-bit.
Makes: As per list of recommended brands.
648 ELEC- Supply, Installation, Testing and Commissioning of Nos 81863
7.8.30 Receiver compatible to the above transmitter, input:
HbaseT/Dxlink RJ-45, output: HDMI, Analog Stereo
Output : 3.5mm Mini-Stereo Jack, HDCP Compliant,
Control: Rs232, IR.
Makes: As per list of recommended brands.
Page 217 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
649 ELEC- Supply, installation, testing and commissioning of Nos 66500
7.8.31 Wireless Presentation System with 4K resolution,
enables iOS, Android, Chromebook, PC, and Mac
device users to instantly connect to a main display
without a dongle, 2.4GHz/5GHz Wi–Fi and MIMO
antennas, Two participants can simultaneously
present content on main display along with in-built
processor of Intel, Main Memory: 4GB, Storage: 32
GB, Networking: 802.11 ac/b/g/n dual band Wireless
LAN and Bluetooth 4.1, Operating System: Linux.
Makes: As per list of recommended brands.
650 ELEC- Supply, installation, testing and commissioning of 8 Nos 55423
7.8.32 Button control Pad with 2 x RS-232, 2x IR/Serial, 2 x
I/O channel, 1 x Relay, 1 x USB Mini-B, USB, with
Flash: 4 GB, Memory Card: 4 GB SD, DDRAM: 256
MB along with Display Monitoring.
Makes: As per list of recommended brands.
651 ELEC- Supply, Installation, testing and commissioning of Each 48000
7.8.33 Mobile Signal Jammer for 8 Band with all standard
accessories. Model: GST-JAMM-009HI
(High Cooling Mechanism+ Industrial Model)
08 Antennas
Power Supply Adopter Unit
(Note: This Model will Jamm mobile Signal
approximately 40- 50 meters Depending on the Input
Signal Strength.
Makes: As per list of recommended brands.
SECTION 8
8.1 MISCELLANEOUS ITEMS
652 MAT- ELEC- TW Separators / Gutties 100
04223 8.1.1 Nos 233
653 MAT- ELEC- PVC Rawl Plugs 100 39
04224 8.1.2 Nos
654 MAT- ELEC- PVC Grips 100 39
04225 8.1.3 Nos
655 MAT- ELEC- U Nails 100 39
04226 8.1.4 Nos
656 MAT- ELEC- Aluminum Link Clips 100 43
04227 8.1.5 Nos

Page 218 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
657 MAT- ELEC- 50 mm G.I. Nut and Bolts. 1 Set 20
04228 8.1.6
658 MAT- ELEC- 63 to 100 mm G.I. Nut and Bolts. 1 Set 33
04229 8.1.7
659 MAT- ELEC- 50 mm 0 Gauge Nails 1 Doz 59
04230 8.1.8
660 MAT- ELEC- 63 to 100 mm 0 Gauge Nails 1 Doz 93
04231 8.1.9
661 MAT- ELEC- Hard Coke 1 Kg 26
04232 8.1.10
662 MAT- ELEC- Salt 1 Kg 20
04233 8.1.11
663 MAT- ELEC- PVC Cleats 2 Way 100 422
04234 8.1.12 Nos
664 MAT- ELEC- PVC Cleats 4 Way 100 556
04235 8.1.13 Nos
665 MAT- ELEC- Binding Wire 1 Kg 78
04236 8.1.14
666 MAT- ELEC- PVC /cotton tape Role (8 Mtrs) 1 No 24
04237 8.1.15
667 MAT- ELEC- C.I. Knob 1 No 33
04238 8.1.16
668 MAT- ELEC- Stay tight set (Jam bracket 300 mm) 1 Pair 394
04239 8.1.17
669 MAT- ELEC- Stay clamp with bolts and Nuts) 1 Set 262
04240 8.1.18
670 MAT- ELEC- L.T. Guy insulator 1 No 97
04241 8.1.19
671 MAT- ELEC- 12 / 15 MS plain rod fan hook 1 No 42
04242 8.1.20
672 MAT- ELEC- 19 / 20 mm Steel tube fan down rod 1 Mtr 119
04243 8.1.21
673 MAT- ELEC- Concealed box PVC / MS with hook for fan 1 No 139
04244 8.1.22

Page 219 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
674 MAT- ELEC- Supply and fixing of Anchor fastener with fan hook / 1 No 130
04245 8.1.23 Providing MS Fan hook with grouting and cement
plastering.

675 MAT- ELEC- Coil Earthing 1 No 97

04246 8.1.24
676 MAT- ELEC- Cable root Indicators of size 152mm round / 102mm 1 No 110
04247 8.1.25 x 102mm /
152mm x 152mm
677 MAT- ELEC- 40 mm x 40 mm x 6 mm angle iron with I bolt. 1 Set 327
04248 8.1.26
678 MAT- ELEC- Mild Steel Items 1 Kg 83
04249 8.1.27
679 MAT- ELEC- Acrylic Cover of size 4" x 7" for night lamps. 1 No 26
04250 8.1.28
680 MAT- ELEC- TW / PVC Round Blocks 1 No 11
04251 8.1.29
681 MAT- ELEC- G.I. Funnel with Mesh 1/2" x 4" 1 No 104
04252 8.1.30
682 MAT- ELEC- Asbestos Sheet 1 Sq 33
04253 8.1.31 Mt
683 MAT- ELEC- First Aid box 18" x 12" x 8" 1 No 1392
04254 8.1.32
684 MAT- ELEC- 11 KV/ 22 KV Hand gloves 1 No 259
04255 8.1.33
685 MAT- ELEC- 100mm CI pipe 1 mtr As per
04256 8.1.34 civil SOR
8.2 LEGEND PLATES
686 ELEC- Danger Notice Plates of size ---------------------, shall comply with IS:2551-
8.2.1 1982
MAT- a 250x200mm, 1 No 292
04257
MAT- b 200x150mm, 1 No 259
04258
MAT- c 150x100mm, 1 No 129

Page 220 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
04259
687 MAT- ELEC- Bus bar chamber 100mm x 40mm 1 No 70
04260 8.2.2
688 MAT- ELEC- Cable Alley 100mm x 40mm 1 No 70
04261 8.2.3
689 MAT- ELEC- Earth 40mm x 20mm 1 No 65
04262 8.2.4

690 MAT- ELEC- Auto / Manual 1 No 65

04263 8.2.5
691 MAT- ELEC- Semi ovel type aluminum anodized legend plates 1 No 33
04264 8.2.6 ON / OFF / Forward / Reverse / Start / Stop / UP /
DOWN / R Phase / Y Phase / B Phase / Trip / Open /
Close / Left / Right / Motor on / Motor off / Accept /
Retract / Reset / Emergency / Running / Pump off /
Emergency Stop / Emergency on / Slow.
692 MAT- ELEC- Shock instruction chart in English / Hindi / Telugu 1 No 583
04265 8.2.7 duly framed with front glass
8.3 COPPER / ALLUMINIUM / G.I. ITEMS (PER KG)
693 MAT- ELEC- Copper Plate / Strip / SWG wire No.8 / 10 / 14 1 kg 1037
04266 8.3.1
694 MAT- ELEC- Copper winding wire 1 kg 1149
04267 8.3.2
695 MAT- ELEC- Copper winding wire with PVC Insulated of fine 1 kg 1182
04268 8.3.3 quality
696 MAT- ELEC- Aluminum Bus bars / Strips / Accessories 1 kg 338
04269 8.3.4
697 MAT- ELEC- Aluminum winding wire 1 kg 441
04270 8.3.5
698 MAT- ELEC- G.I. Strip / Plate / Wire 1 kg 94
04271 8.3.6
8.4 SMC TYPE SUPPORTS FOR THE BUSBARS
699 ELEC- Supply of type supports for the bus bars-------------
8.4.1
MAT- a 50 x 70 x 14 mm 1 No 43
04272
Page 221 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b 60 x 70 x 14 mm 1 No 50
04273
MAT- c 70 x 70 x 14 mm 1 No 93
04274
MAT- d 300 x 50 x 10 mm 1 No 29
04275
MAT- e 350 x 52 x 10 mm 1 No 229
04276
MAT- f 420 x 60 x 12 mm 1 No 328
04277
700 MAT- ELEC- DMC Earth Flat Supports 20 x3 mm / 20x 6mm / 25 1 No 65
04278 8.4.2 x 6mm / 25 x 3mm / 32 x 3 mm / 32 x 6mm / 40 x 3
mm / 40 x 6mm
701 MAT- ELEC- Heat shrinkable sleeves for the Bus bars up to 70 Sq 1 Mtr 20
04279 8.4.3 mm
702 MAT- ELEC- Heat shrinkable sleeves for the Bus bars above 70 1 Mtr 33
04280 8.4.4 Sq mm
703 MAT- ELEC- 8 mm LED series bulb (54 Nos.) Set 340
04281 8.4.5
704 MAT- ELEC- 8 mm LED series bulb with Navar Patti (250/300 Set 2833
04282 8.4.6 Nos.) with necessary control gear
705 MAT- ELEC- LED RGB pixel series bulbs(50 Nos) Set 623
05588 8.4.7
706 MAT- ELEC- LED RGB pixel series bulbs with Navvar Patti (150 Set 5099
05589 8.4.8 Nos) with necessary control gear
707 MAT- ELEC- Supply of 3W X54 LED RGB PAR cans with IP 67 1 No 9149
05590 8.4.9 protection
708 MAT- ELEC- Supply and fixing of 6mm thick MS Chequered plate. 1 Kg 97
04284 8.4.10
709 MAT- ELEC- Supply and fixing of 6mm thick Aluminum 1 Kg 357
04285 8.4.11 Chequered plate
710 MAT- ELEC- Copper old winding Wire scrap for 1 Kg 1 Kg 211
04286 8.4.12
711 MAT- ELEC- Cement 1 Kg 11
04287 8.4.13
712 ELEC- Cost of Sand 1 777
Page 222 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
8.4.14 Cum
713 ELEC- Cost of Bricks 1000 5179
8.4.15 Nos
714 MAT- ELEC- Hylam Sheet 1 Sq 1
04288 8.4.16 inch

715 ELEC- Supply of Nominal-Bore --------------- G.I. Pipe

8.4.17
MAT- a 25mm Heavy grade 1 mtr 364
04289
MAT- b 25mm Medium grade 1 mtr 319
04290
MAT- c 40mm Heavy grade 1 mtr 546
04291
MAT- d 40mm Medium grade 1 mtr 455
04292
716 MAT- ELEC- 80mm Nominal Bore C.I. Earth Pipe of 3 Mtrs Length 1 no 4530
04293 8.4.18
717 MAT- ELEC- Earth work excavation including all soils for trench, 1 cum 348
04294 8.4.19 Pole Pit and Earth Pit
718 MAT- ELEC- Drilling of 16 Nos through holes of 12mm dia to G.I 1 No 9
04295 8.4.20 pipe
719 MAT- ELEC- G.I Nuts, Bolts and Washers each set 1 set 15
04296 8.4.21
720 MAT- ELEC- 18" dia 2" thick hume pipe ring 1 No 390
04297 8.4.22
721 MAT- ELEC- 18" dia 3" hume pipe ring 1 No 450
04298 8.4.23
722 MAT- ELEC- 2" thick CC cover for hume pipe ring with handle. 1 No 250
04299 8.4.24
723 ELEC- Supply of Saddle / Clamps suitable for fixing ------------------
8.4.25
MAT- a 4 to 10 Sq mm 2 Core Cable 100 297
04300 Nos
MAT- b 4 & 6 Sq mm 4 Core Cable 100 297
04301 Nos
Page 223 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 10 & 16 Sq mm 4 Core Cable 100 388
04302 Nos
MAT- d 25 & 35 Sq mm 3.5 Core Cable. 100 454
04303 Nos
MAT- e 50 Sq mm 3.5 Core Cable. 100 647
04304 Nos
MAT- f 70 & 95 Sq mm 3.5 Core Cable 100 713
04305 Nos
MAT- g 120 to 185 Sq mm 3.5 Core Cable 100 906
04306 Nos
MAT- h 240 & 300 Sq mm 3.5 Core Cable 100 1101
04307 Nos
MAT- i 400 Sq mm 3.5 Core Cable 100 1424
04308 Nos
724 ELEC- Supply and fixing of PVC synthetic elastomer electrically insulated at
8.4.26 conforming to IS: 15652-2006 with----------------

MAT- a Class A insulation having 2mm thickness upto 3.3KV 1 sq 4598

04309 mt
MAT- b Class B insulation having 2.5mm thickness upto 1 sq 4719
04310 11KV mt
MAT- c Class C insulation having 3mm thickness upto 33KV 1 sq 4840
04311 mt
725 MAT- ELEC- Supply of round bottom G.I sheet bucket of 9 Ltrs. 1 no 327
04312 8.4.27 Capacity as per IS:2546 made out of 24-gauge GI
sheet with extra handle at bottom duly painted inside
and red outside with printed with FIRE Mark for
stand and hook and filled with sand and arranged to
existing stand or hook.

726 MAT- ELEC- Providing floor mounting stand for keeping 4No of 1 no 1331
04313 8.4.28 fire bucket 1500mm length, 900mm height made out
of 40x40x6mm angle iron welded with 4 hooks and
duly painted with one coat of red lead and two coats
of enamel paint.

727 ELEC- Supply of GI Louver shutter for exhaust fan

8.4.29

Page 224 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- a 9 to 12" 1 no 182
04314
MAT- b 15 to 18" 1 no 218
04315
728 MAT- ELEC- EICHER model 11:10 with 100 H.P. direct injection 1 No 750200
04316 8.4.30 4 stroke engine with one spare wheel 3800 mm
cabin high deck with jangla (full body) (4 wheeler) for
generator

LABOUR RATES

NB : The labour rates may be adopted based on the common Civil

SoR for the year 2023-24

9.1 WIRELESS FIRE ALARAM SYSTEM

729 MAT- ELEC- Supply and fixing of wireless smoke detection control 1 No 48300
04336 9.1.1 panel of 28 wireless zones, 2 Hard wired Zones,
Tamper Alert, Pass code protected, RF jamming
recognition, diagnostic feature for RF signal strength
between panel and each detector, vent reporting
using PSTN telephone line, dialing upto 4 telephone
numbers, event reporting as per users choice, LCD
screen display, two way voice interaction, battery
backup stand by time up to 12 hrs. Including
transportation, all taxes and all labour charges etc
complete.
Makes: As per list of recommended brands.
730 MAT- ELEC- Supply and fixing of wireless repeater. The wireless 1 No 9775
04337 9.1.2 repeater extends the communication range of
detection by relaying data between receiver and
remote wireless transmitter including transportation,
all taxes and all labour charges etc complete.
Makes: As per list of recommended brands.

Page 225 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
731 MAT- ELEC- Supply and fixing of Wireless Siren Strobe external 1 No 13225
04338 9.1.3 wireless siren - a fully supervised power code
outdoor (IP55) wireless Siren and strobe light.
Designed for external installation. Wire - Free
connection between control panel and siren.
Convenient rapid no- mess installation. Separate fire
alarm signals, 98db Piezo siren and high-power
strobe light. Weather resistant, IP55, 2-way
communication for local and remote diagnostics.
Plug-in power supply, NIMH rechargeable back-up
power battery, transmits status, tamper, low- battery,
supervisory and AC loss messages to the control
panel, Tri- State tamper switch identifies screw
manipulation removal of cover or playing from the
wall including transportation, all taxes and all labour
charges etc complete.
Makes: As per list of recommended brands.
732 MAT- ELEC- Supply and fixing of wireless Fully Supervised 1 No 7936
04339 9.1.4 Smoke Detector, Photoelectric detection technology
for superior detection sensitivity, sound and
transmitted for smoke, tamper and low battery,
works on power code protocol, easy programming
and enrolling to the control panel, long life 9 volt
alkaline or lithium battery including transportation, all
taxes and all labour charges etc complete.
Makes: As per list of recommended brands.
9.2 ADDRESSABLE - FIRE ALARM SYSTEM
733 ELEC- Supply, install, test and commissioning of addressable peer to peer
9.2.1 Networkable analogue addressable type fire alarm control panel with
minimum 1500 Character / 240X64 Pixel / 7inch Touchscreen graphic
LCD display. The panel should be equipped with sufficient numbers of
loop with 20% spare capacity, with each networkable intelligent fire alarm
Control Panel having SLC with capacity of min 250 detectors/ devices in
any combination (Min 120 Detector) with key pad, dual flash-based
microprocessor technology, inbuilt USB Port for upload and down load
the configuration tools, RS232 serial port for direct PC or modem
connection, inbuilt NAC's, min 20 programmable Zonal LEDs and
operates on 240V AC + 10% with 50 Hz with built in charger. The panel
shall have fire, fault relays, option of BMS integration MODBUS/
BACKNET, graphical software for provision of TCP/ IP modules, Remote
Access, Class 'X' wiring with provision of both class 'A' and class 'B'
wiring in the SLC circuit, user friendly with communication facility to
monitor & control the FACPs from a single window. The panel shall be
Page 226 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
suitable for minimum of 5000 event record facility, event fetch from FACP
facility and the single panel shall be suitable for min 2000 fire zones and
200 Panels/ Nodes in one network with all other accessories required to
successfully run the system. The panel shall be completed as per UL and
FM/EN54 & VDS standards (The System cost shall be included of all
necessary cards, modules, Panel enclosure, CPU and associated
accessories to complete the system design)
Makes: As per list of recommended brands as category I.
MAT- a 1 loop 1 No 221375
04340
MAT- b 2 loop 1 No 253000
04341
MAT- c 4 loop 1 No 309925
04342
MAT- d 6 loop 1 No 415553
04343
MAT- e 8 loop 1 No 455400
04344
MAT- f 10 loop 1 No 626175
04345
734 ELEC- Supply, install, test and commissioning of addressable peer to peer
9.2.2 Networkable analogue addressable type fire alarm control panel with
minimum 1500 Character / 240X64 Pixel / 7inch Touchscreen graphic
LCD display. The panel should be equipped with sufficient numbers of
loop with 20% spare capacity, with each networkable intelligent fire alarm
Control Panel having SLC with capacity of min 250 detectors/ devices in
any combination (Min 120 Detector) with key pad, dual flash-based
microprocessor technology, inbuilt USB Port for upload and down load
the configuration tools, RS232 serial port for direct PC or modem
connection, inbuilt NAC's, min 20 programmable Zonal LEDs and
operates on 240V AC + 10% with 50 Hz with built in charger. The panel
shall have fire, fault relays, option of BMS integration MODBUS/
BACKNET, graphical software for provision of TCP/ IP modules, Remote
Access, Class 'X' wiring with provision of both class 'A' and class 'B'
wiring in the SLC circuit, user friendly with communication facility to
monitor & control the FACPs from a single window. The panel shall be
suitable for minimum of 5000 event record facility, event fetch from FACP
facility and the single panel shall be suitable for min 2000 fire zones and
200 Panels/ Nodes in one network with all other accessories required to
successfully run the system. (The System cost shall be included of all
necessary cards, modules, Panel enclosure, CPU and associated
Page 227 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
accessories to complete the system design).
Makes: As per list of recommended brands as category II.

MAT- a 1 loop 1 No 198605

04346
MAT- b 2 loop 1 No 222640
04347
MAT- c 4 loop 1 No 258060
04348
MAT- d 6 loop 1 No 335858
04349
MAT- e 8 loop 1 No 389367
04350
MAT- f 10 loop 1 No 619850
04351
735 MAT- ELEC- Supply, Installation, Testing & Commissioning of 1 No 132825
04352 9.2.3 Network Active Repeater Panel with 1500 Character
/ 240X64 Pixel / 7inch Touchscreen. The LCD shall
Display all events / detectors, devices status of
complete systems in the networked.
Makes: As per list of recommended brands as
category I.
736 MAT- ELEC- Supply, Installation, Testing & Commissioning of 1 No 108158
04353 9.2.4 Network Active Repeater Panel with 1500 Character
/ 240X64 Pixel / 7inch Touchscreen. The LCD shall
Display all events / detectors, devices status of
complete systems in the networked.
Makes: As per list of recommended brands as
category II.
737 MAT- ELEC- Supply, Installation, Testing & Commissioning of 1 No 5819
04354 9.2.5 Analogue Addressable loop powered Sounder &
Beacon with inbuilt isolator and having Min 15
distinct sound patterns/ multitone to indicate Exit
doors and direct occupants for safe and fast
evacuation and 100dB output with minimum 1Hz
Frequency flash rate designed for IP65 requirements
and approved to operate in –10°C to +55°C
temperature, complies with the essential requirement
of the EMC Directive to be supplied with Junction
Box, Glands and other mounting accessories for

Page 228 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
proper installation.
Makes: As per list of recommended brands as
category I.

738 MAT- ELEC- Supply, Installation, Testing & Commissioning of 1 No 4681

04355 9.2.6 Analogue Addressable loop powered Sounder &
Beacon with inbuilt isolator and having Min 15
distinct sound patterns/ multitone to indicate Exit
doors and direct occupants for safe and fast
evacuation and 100dB output with minimum 1Hz
Frequency flash rate designed for IP65 requirements
and approved to operate in –10°C to +55°C
temperature, complies with the essential requirement
of the EMC Directive to be supplied with Junction
Box, Glands and other mounting accessories for
proper installation
Makes: As per list of recommended brands as
category II.
739 MAT- ELEC- Supply, Installation, Testing & Commissioning of 1 No 5693
04356 9.2.7 Dust and Vermin proof (Resettable) addressable
analogue Manual call boxes along with Isolators
inbuilt having front reset mechanism with 170°
viewable LED and can be viewed from the distance
of 7 M. also have inbuilt isolator having operating
temperature from -40°C-70°C to initiate audio visual
alarm in case of Human detection of fire. The
manual call point must be indoor type with IP 44
rating. The call point must be resettable type without
break glass.
Makes: As per list of recommended brands as
category I.
740 MAT- ELEC- Supply, Installation, Testing & Commissioning of 1 No 5060
04357 9.2.8 Dust and Vermin proof (Resettable) addressable
analogue Manual call boxes along with Isolators
inbuilt having front reset mechanism with 170°
viewable LED and can be viewed from the distance
of 7 M. also have inbuilt isolator having operating
temperature from -40°C-70°C to initiate audio visual
alarm in case of Human detection of fire. The
manual call point must be indoor type with IP 44
rating. The call point must be resettable type without
break glass.
Page 229 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Makes: As per list of recommended brands as
category II.
741 MAT- ELEC- Optical smoke detector with LED with standard base 1 No 4086
04358 9.2.9 having capacity of min 126 address combination.
Operating temperature -40°C to 70°C &Humidity 0-
95%. The detector should have polling 360-degree
viewable LED with 5 class approved response
modes all approved with the relevant standards, drift
compensation and transient rejection. The detector
shall have facility to mount in different
comprehensive environment like Hostile
environment, precious storage, Warehouse and
normal working environments. The detector should
have a self-locking mechanism and requires a
special tool to remove this detector. The detector
should have a hard address inside the base. The
detector must have nonvolatile memory to write the
installation date & site codes. The detector should be
made of fire-retardant material & should be melt
above 100-degree C. The detectors must be
openable for the cleaning of dust whenever required.
All the other specs should be as per the specification
attached.
Makes: As per list of recommended brands as
category I.
742 MAT- ELEC- Optical smoke detector with LED with standard base 1 No 3602
04359 9.2.10 having capacity of min 126 address combination.
Operating temperature -40°C to 70°C &Humidity 0-
95%. The detector should have polling 360 degree
viewable LED with 5 class approved response
modes all approved with the relevant standards, drift
compensation and transient rejection. The detector
shall have facility to mount in different
comprehensive environment like Hostile
environment, precious storage, warehouse and
normal working environments. The detector should
have a self-locking mechanism and requires a
special tool to remove this detector. The detector
should have a hard address inside the base. The
detector must have nonvolatile memory to write the
installation date & site codes. The detector should be
made of fire retardant material & should be melt
above 100 degree C. The detectors must be

Page 230 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
openable for the cleaning of dust whenever
required. All the other specs should be as per the
specifications.
Makes: As per list of recommended brands as
category II.
743 MAT- ELEC- Analogue Addressable Heat detector and LED with 1 No 4409
04360 9.2.11 standard base having capacity of min 126 address
combination. Storage temperature -40°C to 80°C &
Humidity 0-95%. The detector shall have facility to
mount in different comprehensive environment like
Hostile environment, Precious storage, Ware house
and normal working environments. The heat detector
must trigger the alarm as per the
A1R/A2R/A2S/CR/CS requirement. The detector
should have self-locking mechanism and requires
special tool to remove this detector. The detector
must have nonvolatile memory to write the
installation date & site codes.
Makes: As per list of recommended brands as
category I.
744 MAT- ELEC- Analogue Addressable Heat detector and LED with 1 No 3871
04361 9.2.12 standard base having capacity of min 126 address
combination. Storage temperature -40°C to 80°C &
Humidity 0-95%. The detector shall have facility to
mount in different comprehensive environment like
Hostile environment, Precious storage, Ware house
and normal working environments. The heat detector
must trigger the alarm as per the
A1R/A2R/A2S/CR/CS requirement. The detector
should have self-locking mechanism and requires
special tool to remove this detector. The detector
must have nonvolatile memory to write the
installation date & site codes.
Makes: As per list of recommended brands as
category II.
745 MAT- ELEC- Analogue Addressable Multi-sensor (Smoke & Heat) 1 No 4516
04362 9.2.13 detector with LED with standard base having
capacity of min 126 address combination. Operating
temperature -40°C to 70°C & Humidity 0-95%. The
detector should have polling 360-degree viewable
LED with 5 class approved response modes all
approved with the relevant standards, drift
compensation and transient rejection. The detector
Page 231 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
should trigger heat alarm as per the A1R class
requirement. The detector shall have facility to
mount in different comprehensive environment like
Hostile environment, Parking Garage, Precious
storage, Ware house and normal working
environments. The detector should have a self-
locking mechanism and requires a special tool to
remove this detector. The detector should have a
hard address inside the base. The detector should
be made of fire-retardant material & should be melt
above 100-degree C. The detectors must be open
for the cleaning of dust whenever required. The
detector must have 4 nonvolatile memories to write
the installation date & site codes
Makes: As per list of recommended brands as
category I.
746 MAT- ELEC- Analogue Addressable Multi-sensor (Smoke & Heat) 1 No 3871
04363 9.2.14 detector with LED with standard base having
capacity of min 126 address combination. Operating
temperature -40°C to 70°C & Humidity 0-95%. The
detector should have polling 360 degree viewable
LED with 5 class approved response modes all
approved with the relevant standards, drift
compensation and transient rejection. The detector
should trigger heat alarm as per the A1R class
requirement. The detector shall have facility to
mount in different comprehensive environment like
Hostile environment, Parking Garage, Precious
storage, Ware house and normal working
environments. The detector should have a self-
locking mechanism and requires special tool to
remove this detector. The detector should have a
hard address inside the base. The detector should
be made of fire-retardant material & should be melt
above 100-degree C. The detectors must be open
for the cleaning of dust whenever required. The
detector must have 4 nonvolatile memories to write
the installation date & site codes Makes: As per list
of recommended brands as category II.
747 MAT- ELEC- Supply, install, test and commissioning of Analogue 1 No 4782
04364 9.2.15 addressable Control (Input/Output) module with
inbuilt relay and isolator with LED indicator,
approved to operate in –10°C to +55°C temperature,
complies with the essential requirement of the EMC
Page 232 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Directive to be supplied with Junction Box and other
mounting accessories for proper installation. In case
of Manufacturer with single Input or Output module
need to supply One quantity of each for line item.
Makes: As per list of recommended brands as
category I.
748 MAT- ELEC- Supply, install, test and commissioning of Analogue 1 No 4213
04365 9.2.16 addressable Control (Input/Output) module with
inbuilt relay and isolator with LED indicator,
approved to operate in –10°C to +55°C temperature,
complies with the essential requirement of the EMC
Directive to be supplied with Junction Box and other
mounting accessories for proper installation. In the
case of Manufacturer with single Input or Output
module need to supply One quantity of each for line
item.
Makes: As per list of recommended brands as
category II.
MAT- ELEC- Deleted 1 No
04366 9.2.17

MAT- ELEC- Deleted 1 No

04367 9.2.18
749 MAT- ELEC- Supply, Installation, Testing & Commissioning of 1 No 4326
04368 9.2.19 Loop isolation module which consists of LED. This
LED shall be mounted with in a round polycarbonate
encloser. Isolator Base for Isolators.
Makes: As per list of recommended brands as
category I.
750 MAT- ELEC- Supply, Installation, Testing & Commissioning of 1 No 3416
04369 9.2.20 Loop isolation module which consists of LED. This
LED shall be mounted with in a round polycarbonate
encloser. Isolator Base for Isolators.
Makes: As per list of recommended brands as
category II.
9.3 CONVENTIONAL - FIRE ALARM SYSTEM
751 ELEC- Supply, Installation, testing and commissioning of conventional Micro-
9.3.1 processor based Fire Alarm panel with ……., 12V SMF batteries etc.,
complete with all standard accessories.
Makes: As per list of recommended brands.

Page 233 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- a 2 Zone 1 No 14516
04370
MAT- b 4 Zone 1 No 17059
04371
MAT- c 6 Zone 1 No 18975
04372
MAT- d 8 Zone 1 No 19608
04373
MAT- e 10 Zone 1 No 24668
04374
MAT- f 12 Zone 1 No 28463
04375
MAT- g 14 Zone 1 No 30645
04376
752 MAT- ELEC- Supply and installation of Repeater panel including 1 No 14117
04377 9.3.2 the cost of mounting accessories complete as per
specifications and as required.
Makes: As per list of recommended brands.
753 MAT- ELEC- Supply and installation of dual tone electronic hooter 1 No 949
04378 9.3.3 of 85dB including the cost of mounting accessories
complete as per specifications and as required.
Makes: As per list of recommended brands.
754 MAT- ELEC- Supply and installation of dust and vermin proof 1 No 759
04379 9.3.4 manual call point to initiate audio-visual alarm
including the cost of mounting accessories complete
as per specifications and as required.
Makes: As per list of recommended brands.
755 MAT- ELEC- Supply and installation of response indicators for 1 No 190
04380 9.3.5 above false ceiling detectors.
Makes: As per list of recommended brands.
756 MAT- ELEC- Supply and installation of plug - in-type multi-criterion 1 No 2024
04381 9.3.6 detectors including the cost of base plate. 75mm dia
M.S. outlet box for fixing of the detector base.
Mounting accessories etc., complete as per
specifications as required.
Makes: As per list of recommended brands.

Page 234 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
757 MAT- ELEC- Supply and installation of plug -in type photo electric 1 No 1771
04382 9.3.7 smoke detectors including the cost of base plate.
75mm dia MS outlet box for fixing the detector base.
Mounting accessories etc complete and as per
specifications and as required.
Makes: As per list of recommended brands.
758 MAT- ELEC- Supply and installation of plug -in type rate of rise 1 No 1645
04383 9.3.8 cum fixed temperature heat detectors including the
cost of base plate. 75mm dia MS outlet box for fixing
of the detector base, mounting accessories etc.,
complete as per specifications and as required.
Makes: As per list of recommended brands.
9.4 POWDER BASED FIRE EXTINGUISHERS
759 Supply and fixing of ABC stored pressure squeeze grip type fire
extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono
Ammonium Phosphate base powder-90 complete with discharge hose
and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure
Gauge, which work effectively on all class of fires (A, B, C & Electrical
fires) with 5 years warranty Including transportation, all taxes and all
labour charges etc complete.

MAT- ELEC- Makes: As per list of recommended brands as 1 No 11637

04384 9.4.1 category I.
MAT- ELEC- Makes: As per list of recommended brands as 1 No 7176
04385 9.4.2 category II.
760 Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate
powder 90 (MAP) 2 Kg Fire extinguisher, stored pressure type, pressure
gauge, gross wt. 3.6 kg, empty wt.1.6 kg, Discharge time minimum 8
sec, controllable discharge mechanism, range min. 2 mts applicable on
classes A,B, C & electrically started fire, A rating -2 A, B rating -21 B,
can construction: Deep drawn and Co2 MIG welding, Valve construction:
Forging & Machining, internal coating of can: Epoxy powder coating,
External coating of Can: Epoxy polyester powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5 years warranty
Including transportation, all taxes and all labour charges etc complete.

MAT- ELEC- Makes: As per list of recommended brands as 1 No 5670

04386 9.4.3 category I.
MAT- ELEC- Makes: As per list of recommended brands as 1 No 4926
04387 9.4.4 category II.

Page 235 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
761 Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate
powder 90 (MAP) 4 Kg Fire extinguisher, stored pressure type, pressure
gauge, gross wt. 6.9 kg, empty wt.2.9 kg, Discharge time minimum 13
sec, controllable discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fire, A rating -3 A, B rating -34 B,
can construction: Deep drawn and Co2 MIG welding, Valve construction:
Forging & Machining, internal coating of can: Epoxy powder coating,
External coating of Can: Epoxy polyester powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5 years warranty
Including transportation, all taxes and all labour charges etc complete.

MAT- ELEC- Makes: As per list of recommended brands as 1 No 7803

04388 9.4.5 category I.
MAT- ELEC- Makes: As per list of recommended brands as 1 No 6118
04389 9.4.6 category II.
762 Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate
powder 90 (MAP) 6 Kg Fire extinguisher, stored pressure type, pressure
gauge, gross wt. 9.4 kg, empty wt.3.4 kg, Discharge time minimum 13
sec, controllable discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fire, A rating -4 A, B rating -34 B,
can construction: Deep drawn and Co2 MIG welding, Valve construction:
Forging & Machining, internal coating of can: Epoxy powder coating,
External coating of Can: Epoxy polyester powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5 years warranty
Including transportation, all taxes and all labour charges etc complete.
MAT- ELEC- Makes: As per list of recommended brands as 1 No 9072
04390 9.4.7 category I.
MAT- ELEC- Makes: As per list of recommended brands as 1 No 8372
04391 9.4.8 category II.
CLEAN AGENT FIRE EXTINGUISHERS
763 Supply and fixing of ISI mark (IS:15683) Clean Agent HCFC 123, 2 Kg
Fire extinguisher , Stored pressure type, pressure gauge, gross weight
3.7Kg , empty weight 1.7 Kg, discharge time minimum 8 secs,
controllable discharge mechanism, range minimum 2 meters, applicable
on class A,B,C and electrically started Fire, A rating- 1A, B rating-21B,
can construction: Deep drawn & CO2 MIG welded, Valve construction:
Forging & Machining, Internal coating of Can: Epoxy powder coating,
External coating of can: Epoxy polyester powder coating, sheet metal
thickness: 1.60 mm, Helium leak detection tested, 5 Years warranty

Page 236 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- ELEC- Makes: As per list of recommended brands as 1 No 16808
04392 9.4.9 category I.
MAT- ELEC- Makes: As per list of recommended brands as 1 No 13910
04393 9.4.10 category II.
764 Supply and fixing of ISI mark (IS:15683) Clean Agent HCFC 123, 4 Kg
Fire extinguisher , Stored pressure type, pressure gauge, gross weight
6.9Kg , empty weight 2.9 Kg, discharge time minimum 8 secs,
controllable discharge mechanism, range minimum 2 meters, applicable
on class A,B,C and electrically started Fire, A rating- 1A, B rating-21B,
can construction: Deep drawn & CO2 MIG welded, Valve construction:
Forging & Machining, Internal coating of Can: Epoxy powder coating,
External coating of can: Epoxy polyester powder coating, sheet metal
thickness: 1.60 mm, Helium leak detection tested, 5 Years warranty.

MAT- ELEC- Makes: As per list of recommended brands as 1 No 28256

04394 9.4.11 category I.
MAT- ELEC- Makes: As per list of recommended brands as 1 No 25358
04395 9.4.12 category II.
765 Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity
confirming to IS 2878 made from ISI marked steam less cylinder
confirming to IS:7285 & CE certified and fitted with ISI marked controlled
valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn
complete with initial gas charged with carrying handle with wheels and
wall mounting bracket. Squeeze lever discharge, used un-used indicator,
epoxy coated paint (Red) with 93% gloss with 2 years warranty including
transportation, all taxes and all labour charges etc complete.

MAT- ELEC- Makes: As per list of recommended brands as 1 No 14329

04396 9.4.13 category I.
MAT- ELEC- Makes: As per list of recommended brands as 1 No 10787
04397 9.4.14 category II.
766 MAT- ELEC- Supply and fixing of Escape signage boards in Rigid 1 No 1518
04398 9.4.15 Photo luminescent based glow in Dark rigid sheet
with high intensity luminous properties with
specification.
Makes: As per list of recommended brands.
767 MAT- ELEC- Supply and fixing of Cease fire or its equivalent 1 No 17078
04399 9.4.16 Escape gear Mild Steel box size
425mmx360mmx140mm Epoxy powder coated to
protect it from Weathering , smoke hood tested to
Page 237 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
European Standard EN 403 1993-S known to reduce
Carbon Monoxide, propend (acrolein), hydrogen
chloride, hydrogen Cyanide and Solid and liquid
toxic particles to manageable level for at least 15
minutes shall with stand temperatures upto 80
degrees single use only Fire Blanket size 1.2m
x1.8m used to cover any vessel containing used to
Extinguish a clothing fire wrap blanket around the
victim.
768 MAT- ELEC- Supply and fixing of 4Nos of 9 Ltrs capacity round 1 Set 1518
04400 9.4.17 bottom sand buckets along with bucket sand, Fire
buckets with round bottom type enamel painted,
white inside & red outside and letter FIRE in black
outside & Handle with mounting bracket.
769 MAT- ELEC- Supply and fixing of Fire bucket stand fabricated by 1 Set 1898
04401 9.4.18 M.S. angles to install for Four numbers of buckets as
per local fire officers’ standards.

AEROSOL GENERATION SYSTEM

(An alternative to water based sprinkler system)
770 MAT- ELEC- Supply, Installation and commissioning of Auto 1 No 5175
05591 9.4.19 Detection and Suppression System using Non
Pressurized Aerosol Generator System with
detection of thermocord to make the system
standalone. It can be used for all classes of fire.
The product Min. Life shall be 15 years and no
Maintenance. The Discharge time shall be 8 sec.
The Generator has a net weight of 0.5 kg. Active
Substance of 50gms. The Generator has a capacity
to cover 1 m³.
Makes: As per list of recommended brands.

771 MAT- ELEC- Supply, Installation and commissioning of Auto 1 No 40250

05592 9.4.20 Detection and Suppression System using Non-
Pressurized Aerosol Generator System with
detection of thermocord and Inbuilt Aerosol
Sprinkler flexibility of adjusting it for a
temperature of 57/68/93/141 degree centigrade as
per the site environment to make the system
standalone. It can be used for all classes of fire. The
product Min. Life shall be 15 years and no

Page 238 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Maintenance. The Discharge time shall be 18 sec.
The Generator has a net weight of 2 kg. Active
Substance of 300gms. The Generator has a capacity
to cover 6 m³.
Makes: As per list of recommended brands.
772 MAT- ELEC- Supply, Installation and commissioning of Auto 1 No 51750
05593 9.4.21 Detection and Suppression System using Non-
Pressurized Aerosol Generator System with
detection of thermocord and Inbuilt Aerosol
Sprinkler flexibility of adjusting it for a
temperature of 57/68/93/141 degree centigrade as
per the site environment to make the system
standalone. It can be used for all classes of fire. The
product Min. Life shall be 15 years and no
Maintenance. The Discharge time shall be 22 sec.
The Generator has a net weight of 3 kg. Active
Substance of 0.5 kg. The Generator has a capacity
to cover 10 m³.
Makes: As per list of recommended brands.
773 MAT- ELEC- Supply, Installation and commissioning of Auto 1 No 74750
05594 9.4.22 Detection and Suppression System using Non-
Pressurized Aerosol Generator System with
detection of thermocord and Inbuilt Aerosol
Sprinkler flexibility of adjusting it for a
temperature of 57/68/93/141 degree centigrade as
per the site environment to make the system
standalone to make the system standalone. It can be
used for all classes of fire. The product Min. Life
shall be 15 years and no Maintenance. The
Discharge time shall be 45 sec. The Generator has a
net weight of 4.6 kg. Active Substance of 1 kg. The
Generator has a capacity to cover 20 m³.
Makes: As per list of recommended brands.

Page 239 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
774 MAT- ELEC- Supply, Installation and commissioning of Auto 1 No 94300
05595 9.4.23 Detection and Suppression System using Non-
Pressurized Aerosol Generator System with
detection of thermocord and Inbuilt Aerosol
Sprinkler flexibility of adjusting it for a
temperature of 57/68/93/141 degree centigrade as
per the site environment to make the system
standalone to make the system standalone. It can be
used for all classes of fire. The product Min. Life
shall be 15 years and no Maintenance. The
Discharge time shall be 56 sec. The Generator has a
net weight of 5.6 kg. Active Substance of 2 kg. The
Generator has a capacity to cover 40 m³.
Makes: As per list of recommended brands.

775 MAT- ELEC- Supply, Installation and commissioning of Auto 1 No 106950

05596 9.4.24 Detection and Aerosol Suppression System using
Non-Pressurized Aerosol Generator System with
detection of thermocord and Inbuilt Aerosol
Sprinkler flexibility of adjusting it for a
temperature of 57/68/93/141 degree centigrade as
per the site environment to make the system
standalone. It can be used for all classes of fire. The
product Min. Life shall be 15 years and no
Maintenance. The Discharge time should be 80 sec.
The Generator has a net weight of 8 kg. Active
Substance of 4 kg. The Generator has a capacity to
cover 80 m³.
Makes: As per list of recommended brands.
776 MAT- ELEC- Supply, Installation and commissioning of Aerosol 1 No 80500
05597 9.4.25 Fire suppression control Panel is basically a 10 Zone
conventional panel with LED indications for sensors
is open or fire. When the fire is detected by
Sprinkler, Aerosol gets activated. 10 Aerosol
Sprinkler input and 10 Aerosol Generator outputs
provided. The Panel consists of 10 individual manual
operation switch and one master switch to activate
10 Aerosol Generator outputs simultaneously

777 MAT- ELEC- Supply, Installation and commissioning of Aerosol 1 No 22425

05598 9.4.26 control Switch is a Controller for Activation of Each
Aerosol Generator
Makes: As per list of recommended brands.

Page 240 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
778 MAT- ELEC- Providing 'Fire Retardant Paint 1 hr Fire Resistance 1 No 2185
05599 9.4.27 can be used to 'flame retard only 100 % cotton
fabric, is normally used 'to treat coarse fabric e.g.
tents etc. and gives coverage of 'approx. 120 to 130
sq.ft. to a fabric of 275-325 gsm. 'Can be applied
'Meant only for 100% cotton and coarse fabric like
canvas '/ tents, natural wood etc.
Makes: As per list of recommended brands.

779 MAT- ELEC- Providing 'Flame retard any kind of fabric, be it 100% 1 No 2990
05600 9.4.28 polyester or '100% cotton. It is normally used to
flame 'retard upholstery, curtains, carpets etc., gives
a coverage 'of approx. 120 to 130 sq.ft. to a fabric of
275-325 gsm.

780 MAT- ELEC- Providing 'Fire Retardant coat towards passive 1 No 4830
05601 9.4.29 protection to sustain 'up to 1000 Deg.C. for 1 hour.
This product can be used for 'all the materials such
as cable, steel, wood, cloth & 'concrete surface etc.
781 ELEC- AUTO ABC 150KG FIRE EXTINGUSHING SYSTEM 1 NO 588525
9.4.30 WITH AUTO FIRE DETECTION TUBE
TECHNOLOGY SKIT MOUNTED ABC powder
firefighting unit 150 kg capacity. Vessels are made of
boiler quality steel plate 8 mm thick radiography
welding as per ASME code. Skit mounted having an
Auto Fire Detection tube 25mtr. long fitted. The
discharge line can be fixed with open type nozzle,
expelling agent of Co2 cylinder agent which is fitted
with Auto Fire Detection specially designed imported
Ceodeux valve and specially designed DIFFUSER
SYSTEM to achieve minimum 98% discharge. Used
for all classes of fire.
This system consists of the following:
Expelling cylinder and Skit mounted ABC container
with discharge output nozzle
Expelling container connected through with manifold
& diffuser nozzle to main cylinder.
It is also fitted with Ceodex Valve, one end
connected with Auto Fire Detection Tube to detect
and another end fitted with pressure switch and
hooter. Auto Fire Detection Tube will be installed
with pressure of 12kg/cm2. In case of fire the tube
gets rupture in the temperature 115 degree C .
Page 241 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Whereby the pressure in tube comes down to 0 level
sudden falling in pressure opens the valve and
releases the expelling gas to main cylinder.
through manifold and diffuser systems. Discharge
from main cylinder at fixed pressure through rapture
disc to flood and quench fire instantly. Rapture disc
can also be designed depending upon hazardous
area. This is the only latest technology which is used
for all kinds of inflammable hazards at open area.
The fire fighting unit shall be made strictly as per
the specifications to the satisfaction of State
Disaster Response and Fire Serivces
Vijayawada.
Makes: As per list of recommended brands.
9.5 FIRE HYDRANT AND SPRINKLER SYSTEM
ELECTRIC DRIVEN MAIN FIRE PUMPS (SPLIT CASE)
782 MAT- ELEC- Supplying, installation, testing and commissioning of 1 Set 401856
04402 9.5.1 electric driven main fire pump suitable for automatic
operation and consisting of following complete in all
respect as required
a) Horizontal type, multistage, centrifugal, split casing pump of cast iron
body & bronze impeller with stainless steel shaft, mechanical seal to
ensure a minimum pressure of 3.5 Kg / sq.cm. at the highest and farthest
outlet at specified flow of 1620 lpm at 56 Mtr. head conforming to IS
1520
b) Suitable HP SQ cage induction motor, TEFC, synchronous speed
1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP
55 protection for enclosure, horizontal foot mounted type with Class-'F'
insulation, conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
783 MAT- ELEC- Supplying, installation , testing and commissioning of 1 Set 452088
04403 9.5.2 electric driven main fire pump suitable for automatic
operation and consisting of following : complete in all
respect as required

Page 242 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
a) Horizontal type, multistage, centrifugal, split casing pump of cast iron
body & bronze impeller with stainless steel shaft, mechanical seal to
ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest
outlet at specified flow of 2280 lpm at 70 Mtr. head conforming to IS
1520
b) Suitable HP SQ cage induction motor, TEFC, synchronous speed
1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP
55 protection for enclosure, horizontal foot mounted type with Class-'F'
insulation, conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
784 MAT- ELEC- Supplying Installation, testing and commissioning of electric 703248
04404 9.5.3 driven main fire pump suitable for automatic operation and
consisting of following Complete in all respect as required.

a) Horizontal type, multistage, centrifugal, split casing pump of cast iron

body and bronze impeller with stainless steel shaft, mechanical seal to
ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest
outlet at specified flow of 2280 LPM and 120 Metres head conforming
to IS 1520.
b) Suitable HP SQ cage induction motor, TEFC, synchronous speed
1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP
55 protection for enclosure, horizontal foot mounted type with Class-'F'
insulation, conforming to IS-325
c)M.S. fabricated Common base plate, coupling, coupling guard,
foundation bolts etc. as required.
d)Suitable CC foundation of 1:2:4 ratio (1 Cement: 2 coarse sand : 4
graded stone aggregate 40 mm nominal size ) duly plastered and with
anti-vibration pads.
Makes: As per list of recommended brands.
785 MAT- ELEC- Supplying, installation, testing and commissioning of 1 Set 521157
04405 9.5.4 electric driven main fire pump suitable for automatic
operation and consisting of following complete in all
respect as required.

Page 243 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
a) Horizontal type, multistage, centrifugal, split casing pump of cast iron
body & bronze impeller with stainless steel shaft, mechanical seal to
ensure a minimum pressure of 3.5 Kg / sq.cm. at highest and farthest
outlet at specified flow of 2850 lpm at 70 Mtr. head conforming to IS
1520
b) Suitable HP SQ cage induction motor, TEFC, synchronous speed
1500 RPM, suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP
55 protection for enclosure, horizontal foot mounted type with Class-'F'
insulation, conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
786 MAT- ELEC- Supplying Installation, testing and commissioning of 1 Set 728364
04406 9.5.5 electric driven main fire pump suitable for automatic
operation and consisting of following Complete in all
respect as required.
a) Horizontal type, multistage, centrifugal, split casing pump of cast iron
body and bronze impeller with stainless steel shaft, mechanical seal to
ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest
outlet at specified flow of 2850 LPM and 120 Metres head conforming to
IS 1520.
b) Suitable HP SQ cage induction motor, TEFC, synchronous speed
1470 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP
55 protection for enclosure, horizontal foot mounted type with Class-'F'
insulation, conforming to IS-325
c)M.S. fabricated Common base plate, coupling, coupling guard,
foundation bolts etc. as required.
d)Suitable CC foundation of 1:2:4 ratio (1 Cement: 2 coarse sand : 4
graded stone aggregate 40 mm nominal size ) duly plastered and with
anti-vibration pads
Makes: As per list of recommended brands.
DIESEL ENGINE DRIVEN FIRE PUMPS
787 MAT- ELEC- Supplying, installation, Testing and commissioning of 1 Set 522413
04407 9.5.6 diesel engine driven main fire pump suitable for
automatic operation and consisting of following :
complete in all respect as required

Page 244 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
a) Horizontal type, multistage, centrifugal pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal to ensure a
minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at
specified flow of 1620 lpm at 56 Mtr head conforming to IS 1520
b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine
conforming to relevant BS & IS standard complete with auto starting
mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank,
exhaust pipe extended upto 1 m. outside pump house duly insulated with
50mm thick glass wool with 1.0mm thick aluminum sheet cladding,
residential silencer, instruments and protection as per specification, stop
solenoid for auto stop in the event of fault with audio indications, painted
with post office red color etc as required.
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
788 MAT- ELEC- Supplying, installation, Testing and commissioning of 1 Set 753480
04408 9.5.7 diesel engine driven main fire pump suitable for
automatic operation and consisting of following :
complete in all respect as required

a) Horizontal type, multistage, centrifugal pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal to ensure a
minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at
specified flow of 2280 lpm at 70 Mtr head conforming to IS 1520
b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine
conforming to relevant BS & IS standard complete with auto starting
mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank,
exhaust pipe extended upto 1 m. outside pump house duly insulated with
50mm thick glass wool with 1.0mm thick aluminum sheet cladding,
residential silencer, instruments and protection as per specification, stop
solenoid for auto stop in the event of fault with audio indications, painted
with post office red colour etc as required.
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.

Page 245 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
789 MAT- ELEC- Supplying, installation, Testing and commissioning of diesel 910455
04409 9.5.8 engine driven main fire pump suitable for automatic operation
and consisting of following : complete in all respect as
required

a) Horizontal type, multistage, centrifugal pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal to ensure a
minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at
specified flow of 2280 lpm at 120 Mtr head conforming to IS 1520
b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine
conforming to relevant BS & IS standard complete with auto starting
mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank,
exhaust pipe extended upto 1 m. outside pump house duly insulated with
50mm thick glass wool with 1.0mm thick aluminum sheet cladding,
residential silencer, instruments and protection as per specification, stop
solenoid for auto stop in the event of fault with audio indications, painted
with post office red colour etc as required.
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
790 MAT- ELEC- Supplying, installation, Testing and commissioning of 1 Set 853944
04410 9.5.9 diesel engine driven main fire pump suitable for
automatic operation and consisting of following:
complete in all respect as required
a) Horizontal type, multistage, centrifugal pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal to ensure a
minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at
specified flow of 2850 lpm at 70 Mtr head conforming to IS 1520
b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine
conforming to relevant BS & IS standard complete with auto starting
mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank,
exhaust pipe extended upto 1 m. outside pump house duly insulated with
50mm thick glass wool with 1.0mm thick aluminum sheet cladding,
residential silencer, instruments and protection as per specification, stop
solenoid for auto stop in the event of fault with audio indications, painted
with post office red colour etc as required.
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.

Page 246 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
791 MAT- ELEC- Supplying, installation, Testing and commissioning of 1 Set 973245
04411 9.5.10 diesel engine driven main fire pump suitable for
automatic operation and consisting of following:
complete in all respect as required
a) Horizontal type, multistage, centrifugal pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal to ensure a
minimum pressure of 3.5 Kg / sq.cm. at highest and farthest outlet at
specified flow of 2850 lpm at 120 Mtr head conforming to IS 1520
b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine
conforming to relevant BS & IS standard complete with auto starting
mechanism, 12 Volts / 24 Volts electric starting equipment, Diesel Tank,
exhaust pipe extended upto 1 m. outside pump house duly insulated with
50mm thick glass wool with 1.0mm thick aluminum sheet cladding,
residential silencer, instruments and protection as per specification, stop
solenoid for auto stop in the event of fault with audio indications, painted
with post office red colour etc as required.
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
ELECTRIC DRIVEN MAIN FIRE PUMPS (END SUCTION)

792 MAT- ELEC- Supplying, installation, testing and commissioning of 1 Set 301392
04412 9.5.11 electric driven main fire pump suitable for automatic
operation and consisting of following : complete in all
respect as required

a) End suction back pull-out centrifugal pump, Std fitted with BRONZE
IMPELLER & gland packing, capacity 171 Cum/hr (2850 LPM) at total
head 70 M at operating speed 2900 rpm. Pump duty as per TAC
b) 55 KW / 75 HP, 3000 rpm, TEFC (IP55) horizontal foot mounted,
squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz
+/-5%, a.c. supply. Class ‘F’ insulated and suitable for ambient
temperature up to 50 deg C. Motor in frame SC 250 M frame for driving
above pump.

Page 247 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
793 MAT- ELEC Supplying, installation , testing and commissioning of 1 Set 246137
04413 9.5.12 electric driven main fire pump suitable for automatic
operation and consisting of following : complete in all
respect as required

a) End suction back pull out centrifugal pump, Std fitted with BRONZE
IMPELLER & gland packing ,capacity 137 Cum/hr (2280 LPM) at total
head 70 mwc at operating speed 2900 rpm. Pump duty as per TAC

b) 45 KW / 60 HP, 3000 rpm, TEFC (IP55) Horizontal foot mounted,

squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz
+/-5%, a.c. supply. Class ‘F’ insulated and suitable for ambient
temperature up to 50 deg C. Motor in frame SC 225 M frame

c) M.S. Fabricated common base plate, coupling, coupling guard,

foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
794 MAT- ELEC Supplying, installation, Testing and commissioning of Electric 180835
04414 9.5.13 engine driven main fire pump suitable for automatic operation
and consisting of following: complete in all respect as required

a) End suction back pull out centrifugal pump, Std fitted with BRONZE
IMPELLER & gland packing, capacity 97 Cum/hr (1620 LPM) at total
head 56 mwc at operating speed 2900 rpm. Pump duty as per TAC

b) 30 KW / 40 HP, 3000 srpm, TEFC (IP55) horizontal foot mounted,

squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz
+/-5%, a.c.supply. Class ‘F’ insulated and suitable for ambient
temperature up to 50 deg C. Motor in frame SC 250 M frame for driving
above pump.
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.

Page 248 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
DIESEL ENGINE DRIVEN MAIN FIRE PUMPS (END SUCTION)

795 MAT- ELEC- Supplying, installation, Testing and commissioning of 1 Set 626644
04415 9.5.14 diesel engine driven main fire pump suitable for
automatic operation and consisting of following:
complete in all respect as required
a) End suction back pull out pump, Std fitted with BRONZE Impeller &
gland packing, capable of delivering 171 Cum/hr(2850 LPM) at a total
head of 70 M when operated at 1800 rpm and pump duty as per TAC
b) Liquid cooled, 85 BHP at 1800 rpm, diesel engine (Radiator cooled) 12
Volts starting system with standard accessories

c) M.S. Fabricated common base plate, coupling, coupling guard,

foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
796 MAT- ELEC- Supplying, installation, Testing and commissioning of 1 Set 499808
04416 9.5.15 diesel engine driven main fire pump suitable for
automatic operation and consisting of following:
complete in all respect as required
a) End suction back pull out pump, Std fitted with BRONZE Impeller &
gland packing, capable of delivering 137 Cum/hr(2280 LPM) at a total
head of 70 M when operated at 2150 rpm and pump duty as per TAC
b) Liquid cooled, 68 BHP at 1800 rpm, Diesel engine (Radiator cooled)
12 Volts starting system with standard accessories

c) M.S. Fabricated common base plate, coupling, coupling guard,

foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
797 MAT- ELEC- Supplying, installation, Testing and commissioning of 1 Set 437018
04417 9.5.16 Diesel engine driven main fire pump suitable for
automatic operation and consisting of following :
complete in all respect as required
Page 249 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
a) End suction back pull out pump, Std fitted with BRONZE Impeller &
gland packing, capable of delivering 97 Cum/hr(1620 LPM) at a total
head of 56 M when operated at 2150 rpm and pump duty as per TAC

b) Liquid cooled, 50 BHP at 1800 rpm, Diesel engine (Radiator cooled)

12 Volts starting system with standard accessories

c) M.S. Fabricated common base plate, coupling, coupling guard,

foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.

JOCKEY PUMPS
798 MAT- ELEC- Supplying, installation , testing and commissioning of 1 Set 61534
04418 9.5.17 electric driven pressurization / Jockey pump suitable
for automatic operation and consisting of following :
complete in all respect as required
a) Horizontal type, multistage, centrifugal pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal and flow of
180 lpm at 56 Mtr head conforming to IS 1520
b) Suitable HP SQ cage induction motor TEFC type suitable for operation
on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for
enclosure, horizontal foot mounted type with Class-'F' insulation,
conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
799 MAT- ELEC- Supplying, installation, testing and commissioning of 1 Set 90418
04419 9.5.18 electric driven pressurization / Jockey pump suitable
for automatic operation and consisting of following:
complete in all respect as required
a) Horizontal type, multistage, centrifugal pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal and flow of
180 lpm at 70 Mtr head conforming to IS 1520

Page 250 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
b) Suitable HP SQ cage induction motor TEFC type suitable for operation
on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for
enclosure, horizontal foot mounted type with Class-'F' insulation,
conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
800 MAT- ELEC- Supplying, installation, testing and commissioning of 1set 138138
04420 9.5.19 electric driven pressurization / Jockey pump suitable
for automatic operation and consisting of following:
complete in all respect as required
a) Horizontal type, multistage, centrifugal pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal and flow of
180 lpm at 120 Mtr head conforming to IS 1520

b) Suitable HP SQ cage induction motor TEFC type suitable for operation

on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for
enclosure, horizontal foot mounted type with Class-'F' insulation,
conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
BOOSTER PUMPS
801 MAT- ELEC- Supplying, installation, testing and commissioning of 1 Set 70325
04421 9.5.20 electric driven Terrace / Booster pump suitable for
automatic operation and consisting of following:
complete in all respect as required.
a) Horizontal type, multistage, centrifugal pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal and flow of
900 lpm at 45 Mtr head conforming to IS 1520
b) Suitable HP SQ cage induction motor TEFC type suitable for operation
on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for
enclosure, horizontal foot mounted type with Class-'F' insulation,
conforming to IS-325

Page 251 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
802 MAT- ELEC- Supplying, installation , testing and commissioning of 1 Set 54627
04422 9.5.21 electric driven Terrace / Mono Bloc Booster pump
suitable for automatic operation and consisting of
following : complete in all respect as required.

a) Horizontal type, centrifugal End Suction pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal and flow of
900 lpm at 45 Mtr head conforming to IS 1520
b) Three Phase High Speed Centrifugal Pump. Pump with CI Impeller
and Gland Packing with 9.3 KW / 12.5HP, 2 pole, TEFC, 415 V, 3ph
motor
c) M.S. Fabricated common base plate, coupling, coupling guard,
foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.
803 MAT- ELEC- Supplying, installation, testing and commissioning of 1 Set 52116
04423 9.5.22 electric driven Terrace / Mono Bloc Booster pump
suitable for automatic operation and consisting of
following: complete in all respect as required.
a) Horizontal type, centrifugal End Suction pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal and flow of
750 lpm at 35 Mtr head conforming to IS 1520

b) Three Phase High Speed Centrifugal Pump. Pump with CI Impeller

and Gland Packing with 7.5 KW / 10 HP, 2 pole, TEFC, 415 V, 3ph motor

c) M.S. Fabricated common base plate, coupling, coupling guard,

foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.

Page 252 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
804 MAT- ELEC- Supplying, installation, testing and commissioning of 1 Set 47972
04424 9.5.23 electric driven Terrace / Mono Bloc Booster pump
suitable for automatic operation and consisting of
following: complete in all respect as required.
a) Horizontal type, centrifugal End Suction pump of cast iron body &
bronze impeller with stainless steel shaft, mechanical seal and flow of
450 lpm at 35 Mtr head conforming to IS 1520
b) Three Phase High Speed Centrifugal Pump. Pump with CI Impeller
and Gland Packing with 5 KW / 7.5 HP, 2 pole, TEFC, 415 V, 3ph motor

c) M.S. Fabricated common base plate, coupling, coupling guard,

foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with anti-vibration
pads.
Makes: As per list of recommended brands.

CONTROL PANELS

805 MAT- ELEC- Fabrication, supply, transportation, Installation 1 No 266783

05602 9.5.24 testing & commissioning of Electrical control panel of
cubical construction, floor mounted type, fabricated
out of 2mm thick CRCA sheet, compartmentalized
with hinged lockable doors, dust and vermin proof,
powder coated of approved shade after 7 tank
treatment process, cable alley, interconnection with
suitable size copper conductor cable/solid copper
strip, having switchgears and accessories,
mountings and internal wiring, earth terminals,
numbering etc. complete in all respect, suitable for
main fire pump, pressurization pump & diesel pump
set complete with following in coming and
Outgoings, suitable for operation on 415V, 3 phase,
50Hz Ac Supply.
Makes: As per list of recommended brands.
INCOMING :

250A, 50kA 4 Pole MCCB, Ics = 100%, Icu rating

Digital Voltmeter 0-500V with selector switch
Digital Ammeter (0-250 A) with selector switch & CTs etc.

Page 253 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps

Set of Copper Bus Bar 300A

OUTGOING :

( Note : All outgoing feeders for pumps should have digital Ammeter with
selector switches, and LED type ON, OFF, trip indicating lamps)
MAIN FIRE PUMP
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta
starter suitable for 60 HP pump with overload protection, current sensing
type single phase preventor complete with all accessories and internal
wiring required for automatic operation selector switch for local/remote,
auto/manual/OFF operation.
JOCKEY PUMP
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable protection, current
sensing type single phase preventor complete with all accessories and
internal wiring required for automatic operation, selector switch for
local/remote, auto/manual/OFF operation.

DIESEL ENGINE CONTROL

Control for diesel engine comprising - Automatic/Manual selector switch
& 3 attempts starting device, timers and relays as required, push buttons,
start/stop in manual mode Indicating lamp for high/ low lube oil pressure,
High Water Temp and Engine on indication Water Temp and Engine on
indication. Battery charger suitable for 12V/24 V DC with boost and trickle
selector switch, 0-30 V DC voltmeter, and 0- 20 A DC Ammeter All
standard relays and accessories for automatic operation of diesel engine
System Controller.
806 MAT- ELEC- Designing, Supply, Transportation, Installation, 1 No 313935
05603 9.5.25 Testing and commissioning of system controller to
control operation of main electric fire pump, diesel
pump, Pressurization pump, Terrace pump in
sequence as per specification consisting of relays,
timers. Sensors, annunciation window for fault
indication, complete as per specification
Makes: As per list of recommended brands.

INCOMING :
400A, 50kA 4 Pole MCCB, Ics=100% Icu rating

Page 254 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Digital Voltmeter 0-500V with selector switch
Ammeter (0-400 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip
indicating lamps
Set of Copper Bus Bar 500A
OUTGOING :
(Note : All outgoing feeders for pumps should have
digital Ammeter with selector switches, and LED type
ON, OFF, trip indicating lamps)
MAIN FIRE PUMP
200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta
starter suitable for 75 hp pump with overload protection, current sensing
type single phase preventor complete with all accessories and internal
wiring required for automatic operation, selector switch for local/remote,
auto/manual/OFF operation.
JOCKEY PUMP
100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic
Star/Delta starter with overload protection, current sensing type single
phase preventor complete with all accessories and internal wiring
required for automatic operation, selector switch for local/remote,
auto/manual/OFF operation.
DIESEL ENGINE CONTROL

Control for diesel engine comprising - Automatic/Manual selector switch

& 3 attempt starting device, timers and relays as required, push buttons,
start/stop in manual mode Indicating lamp for high/ low lube oil pressure,
High Water Temp and Engine on indication Battery charger suitable for
12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter,
and 0-20 A DC Ammeter All standard relays and accessories for
automatic operation of diesel engine System Controller

Page 255 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
807 MAT- ELEC- Designing, Supply, Transportation, Installation, 1 No 347438
05604 9.5.26 Testing and commissioning of system controller to
control operation of main electric fire pump, diesel
pump, Pressurization pump, Terrace pump in
sequence as per specification consisting of relays,
timers. Sensors, annunciation window for fault
indication, complete as per specifications.
Makes: As per list of recommended brands.
INCOMING :
630A, 50kA 4 Pole MCCB, Ics=100% Icu rating
Digital Voltmeter 0-500V with selector switch
Ammeter (0-630 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip
indicating lamps
Set of Copper Bus Bar 800Amps
OUT GOING :
(Note : All outgoing feeders for pumps should have
digital Ammeter with selector switches, and LED type
ON, OFF, trip indicating lamps)
MAIN FIRE PUMP
250 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta
starter suitable for 100 hp pump with overload protection, current sensing
type single phase preventor complete with all acceessories and internal
wiring required for automatic operation, selector switch for local/remote,
auto/manual/OFF operation.
JOCKEY PUMP
125 A, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic
Star/Delta starter with over load protection, current sensing type single
phase preventor complete with all acceessories and internal wiring
required for automatic operation, selector switch for local/remote,
auto/manual/OFF operation.
DIESEL ENGINE CONTROL

Page 256 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Control for diesel engine comprising - Automatic/Manual selctor switch &
3 attempts starting device, timers and relays as required, push buttons,
start/stop in manual mode Indicating lamp for high/ Low Lub. Oil
pressure, High Water Temp and Engine on indication Battery charger
suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V
DC volt meter, and 0-20 A DC Ammeter All standard relays and
accessories for automatic operation of diesel engine System Controller.
808 MAT- ELEC- Designing, Supply, Transportation, Installation, 1 No 406999
05605 9.5.27 Testing and commissioning of system controller to
control operation of main electric fire pump, diesel
pump, Pressurization pump, Terrace pump in
sequence as per specification consisting of relays,
timers. Sensors, annunciation window for fault
indication, complete as per specification
Makes: As per list of recommended brands.
INCOMING :
400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating
Digital Voltmeter 0-500V with selector switch
Ammeter (0-400 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip
indicating lamps
Set of Copper Bus Bar 500Amps
OUT GOING :
( Note : All outgoing feeders for pumps should have
digital Ammeter with selector switches, and LED type
ON, OFF, trip indicating lamps)
MAIN FIRE PUMPS
125 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic
Star/Delta starter suitable for 60 hp pump with overload protection,
current sensing type single phase preventor complete with all
acceessories and internal wiring required for automatic operation,
selector switch for local/remote, auto/manual/OFF operation. - 2 sets
JOCKEY PUMP

Page 257 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
63 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully
automatic Star/Delta starter with overload protection, current sensing type
single phase preventor complete with all acceessories and internal wiring
required for automatic operation, selector switch for local/remote,
auto/manual/OFF operation. - 2 sets
DIESEL ENGINE CONTROL
Control for diesel engine comprising - Automatic/Manual selctor switch &
3 attempts starting device, timers and relays as required, push buttons,
start/stop in manual mode Indicating lamp for high/ Low Lub. Oil
pressure, High Water Temp and Engine on indi Battery charger suitbale
for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt
meter, and 0-20 A DC Ammeter All standard relays and accessories for
automatic operation of diesel engine System Controller
809 MAT- ELEC- Designing, Supply, Transportation, Installation, 1 No 486413
05606 9.5.28 Testing and commissioning of system controller to
control operation of main electric fire pump, diesel
pump, Pressurization pump, Terrace pump in
sequence as per specification consisting of relays,
timers. Sensors, annunciation window for fault
indication, complete as per specification
Makes: As per list of recommended brands.

INCOMING :
630A, 50kA 4 Pole MCCB, Ics=100% Icu Rating
Digital Voltmeter 0-500V with selector switch
Ammeter (0-630 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip
indicating lamps
Set of Copper Bus Bar 800Amps
OUT GOING :
(Note : All outgoing feeders for pumps should have
digital Ammeter with selector switches, and LED type
ON, OFF, trip indicating lamps)
MAIN FIRE PUMP

Page 258 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic
Star/Delta starter suitable for 75 hp pump with overload protection,
current sensing type single phase preventor complete with all
acceessories and internal wiring required for automatic operation,
selector switch for local/remote, auto/manual/OFF operation. - 2 sets
JOCKEY PUMP
100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully
automatic Star/Delta starter with overload protection, current sensing type
single phase preventor complete with all acceessories and internal wiring
required for automatic operation, selector switch for local/remote,
auto/manual/OFF operation. - 2 sets
DIESEL ENGINE CONTROL
Control for diesel engine comprising - Automatic/Manual selctor switch &
3 attempts starting device, timers and relays as required, push buttons,
start/stop in manual mode Indicating lamp for high/ Low Lub. Oil
pressure, High Water Temp and Engine on indication Battery charger
suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V
DC volt meter, and 0-20 A DC Ammeter All standard relays and
accessories for automatic operation of diesel engine System Controller.
810 MAT- ELEC- Designing, Supply, Transportation, Installation, 1 No 620425
05607 9.5.29 Testing and commissioning of system controller to
control operation of main electric fire pump, diesel
pump, Pressurization pump, Terrace pump in
sequence as per specification consisting of relays,
timers. Sensors, annunciation window for fault
indication, complete as per specification
Makes: As per list of recommended brands.
INCOMING :
800A, 50kA 4 Pole MCCB, Ics=100% Icu Rating
Digital Voltmeter 0-500V with selector switch
Ammeter (0-800 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip
indicating lamps
Set of Copper Bus Bar 1000Amps
OUT GOING:
( Note : All outgoing feeders for pumps should have
Page 259 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
digital Ammeter with selector switches, and LED type
ON, OFF, trip indicating lamps)
Main Fire Pump
250 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic
Star/Delta starter suitable for 100 hp pump with overload protection,
current sensing type single phase preventor complete with all
accessories and internal wiring required for automatic operation, selector
switch for local/remote, auto/manual/OFF operation. - 2 sets
JOCKEY PUMP
125 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully
automatic Star/Delta starter with overload protection, current sensing type
single phase preventor complete with all accessories and internal wiring
required for automatic operation, selector switch for local/remote,
auto/manual/OFF operation. - 2 sets
DIESEL ENGINE CONTROL
Control for diesel engine comprising - Automatic/Manual selector switch
& 3 attempts starting device, timers and relays as required, push buttons,
start/stop in manual mode Indicating lamp for high/ low Lube Oil
pressure, High Water Temp and Engine on indication Battery charger
suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V
DC volt meter, and 0-20 A DC Ammeter All standard relays and
accessories for automatic operation of diesel engine System Controller
MS PIPES
811 ELEC- Providing, laying, testing & Commissioning of following classes MS pipes
9.5.30 conforming to IS 3589 and 1239 including fittings like elbows, tees,
flanges, tapers, nuts, bolts, gaskets including transportaiton and painting
with two coats of red oxide paint and one coat of post office red enamel
paint and all labour charges and cost of all accessories etc., complete.
Makes: As per list of recommended brands.
C-CLASS MS PIPES
MAT- a 250 mm dia 1 Mtr 5169
04425
MAT- b 200 mm dia 1 Mtr 4484
04426
MAT- c 150 mm dia 1 Mtr 3421
04427

Page 260 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- d 100 mm dia 1 Mtr 2128
04428
MAT- e 80 mm dia 1 Mtr 1413
04429
MAT- f 65 mm dia 1 Mtr 1065
04430
MAT- g 50 mm dia 1 Mtr 852
04431
MAT- h 40 mm dia 1 Mtr 722
04432
MAT- i 32 mm dia 1 Mtr 570
04433
MAT- j 25 mm dia 1 Mtr 426
04434
B- CLASS MS PIPES
MAT- a 250 mm dia 1 Mtr 4560
04435
MAT- b 200 mm dia 1 Mtr 3953
04436
MAT- c 150 mm dia 1 Mtr 2736
04437
MAT- d 100 mm dia 1 Mtr 1824
04438
MAT- e 80 mm dia 1 Mtr 1293
04439
MAT- f 65 mm dia 1 Mtr 958
04440
MAT- g 50 mm dia 1 Mtr 745
04441
MAT- h 40 mm dia 1 Mtr 563
04442
MAT- i 32 mm dia 1 Mtr 456
04443
MAT- j 25 mm dia 1 Mtr 380
04444

Page 261 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
812 ELEC- Supplying and fixing single headed Internal / External hydrant valve with
9.5.31 instantaneous Gun metal/Stainless steel couplings of 63mm dia with Cast
iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun
Metal cap and chain as required.
Makes: As per list of recommended brands.
MAT- a Single Headed Gun Metal 1 No 9503
04445

MAT- b Single Headed Stainless Steel 1 No 8462

05608

813 ELEC- Supplying, fixing, testing and commissioning of butterfly valve PN 1.6,
9.5.32 with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts,
Washers, gaskets, conforming to IS 13095 of following sizes as required.
Makes: As per list of recommended brands.
MAT- a (a) 250 mm . dia 1 No 14971
04446
MAT- b (b) 200 mm . dia 1 No 6379
04447
MAT- c (c) 150 mm dia 1 No 5337
04448
MAT- d (d) 100 mm dia 1 No 4101
04449
MAT- e (e) 80 mm dia 1 No 3775
04450
814 ELEC- Providing, installation, testing and commissioning of dual Plate non -
9.5.33 return valve of following sizes confirming to IS: 5312 complete with
rubber gasket, GI bolts, nuts, washers etc as required.
Makes: As per list of recommended brands.
MAT- a a) 250mm dia 1 No 23432
04451
MAT- b (b) 200 mm dia 1 No 11977
04452
MAT- c (c) 150 mm dia 1 No 8592
04453
MAT- d (d) 100 mm dia 1 No 4556
04454

Page 262 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- e (e) 80 mm dia 1 No 4426
04455
MAT- f (f) 50 mm dia 1 No 2343
04456
815 ELEC- Manufacture, Supply and delivery of CI Wafer Lug type Butterfly Valves
9.5.34 conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation,
CED and taxes etc., complete. Operation done with worm actuator ISI
marked .
Makes: As per list of recommended brands.
MAT- a 250 mm . dia 1 No 19918
04457
MAT- b 200 mm . dia 1 No 14320
04458
MAT- c 150 mm dia 1 No 9113
04459
MAT- d 100 mm dia 1 No 6118
04460
MAT- e 80 mm dia 1 No 4556
04461
MAT- f (50 mm dia 1 No 3645
04462
816 ELEC- Providing, installation, testing and commissioning of gun metal valves of
9.5.35 following sizes as required.
Makes: As per list of recommended brands.
MAT- a 50 mm dia 1 No 2083
04463
MAT- b 40 mm dia 1 No 1692
04464
MAT- c 32 mm dia 1 No 1529
04465
817 ELEC- Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm
9.5.36 dia Male and Female Gun metal / SS couplings duly binded with GI wire,
rivets etc conforming to IS 636 (Type -A) as required.
Makes: As per list of recommended brands.
MAT- a Gun metal 1 No 7330
04466

Page 263 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- b SS couplings 1 No 5468
05609

818 ELEC- Supplying and fixing 63mm dia, 15 mtr long CP hose pipe with 63mm dia
9.5.37 Male and Female Gun metal / SS couplings duly binded with GI wire,
rivets etc conforming to IS 636 (Type -A) as required.
Makes: As per list of recommended brands.
MAT- a Gun metal 1 No 6249
04467

MAT- b SS couplings 1 No 5207

05610

819 ELEC- Supply, installation, testing and commissioning of stainless steel Y–

9.5.38 strainer fabricated out of 1.6 mm thick SS 304 with following sizes
confirming to IS specifications complete with rubber gasket, GI bolts ,
nuts, washers etc as required.
Makes: As per list of recommended brands.
MAT- a 250mm dia 1 No 23953
04468
MAT- b 200 mm . dia 1 No 22131
04469
MAT- c 150 mm dia 1 No 10414
04470
MAT- d 100 mm dia 1 No 5598
04471
MAT- e 80 mm dia 1 No 5077
04472
820 MAT- ELEC- Supplying and fixing First -Aid Hose Reel with MS 1 No 8722
04473 9.5.39 construction spray painted in Post office Red,
Conforming to Is 884 with upto date amendments,
complete with the following as required.
Makes: As per list of recommended brands.
a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic /
Textile reinforced / Rubber braided / Polypropylene Type - 2 as per
IS:12585
b) 20mm (Nominal internal) dia gun metal ball/gate valve and nozzle.

Page 264 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
c) Drum and brackets for fixing the equipment on wall.
d) Connections from riser with 25mm dia stop valve (gun metal) & MS
pipe.
821 MAT- ELEC- Supplying and fixing of hose cabinet of size 750mm 1 No 3775
04474 9.5.40 X 600mm x 250mm made of No 16 gauge SWG
CRCA sheet with 6mm thick glazed glass door
including necessary locking arrangement suitable to
accommodate 2 Nos 15 mtr long Hose pipe, 1 No
branch pipe, mounted on wall OR raised brick
platform and duly painted with Post office red
externally and white internally with synthetic enamel
paint complete in all respect, for external hydrant as
required.
Makes: As per list of recommended brands.
822 ELEC- Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal
9.5.41 internal diameter) size Gun metal / SS nozzle conforming to IS 903,
suitable for instantaneous connection to interconnect hose pipe coupling
as required.
Makes: As per list of recommended brands.
MAT- a Gun metal 1 No 2864
04475
MAT- b SS couplings 1 No 2083
05611

823 MAT- ELEC- Supply and fixing 4 way fire brigade connection of 1 No 10414
04476 9.5.42 cast iron body with 4 Nos Gun metal Male
instantaneous inlet couplings complete with cap and
chain as required for 150mm dia MS pipe
connection, conforming to IS 904 as required.
Makes: As per list of recommended brands.
824 MAT- ELEC- Supply and fixing 2 way fire brigade connection of 1 No 7811
04477 9.5.43 cast iron body with 2 Nos Gun metal Male
instantaneous inlet couplings complete with cap and
chain as required for 100mm dia MS pipe
connection, conforming to IS 904 as required.
Makes: As per list of recommended brands.

Page 265 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
825 MAT- ELEC- Supply and fixing air vessel made of 250 mm dia, 8 1 No 19471
04478 9.5.44 mm thick MS sheet, 1200mm in height with air
release valve on top and flanged connection to riser,
drain arrangement with 25mm dia Gun metal wheel
valve, with required accessories, pressure gauge
and painting with synthetic enamel paint of approved
shade as required.
826 MAT- ELEC- Providing fixing, testing and commissioning of 15mm 1 No 557
04479 9.5.45 size quartzoid bulb type sprinklers of rating 68º C.
pendent / side wall with required accessories.
Makes: As per list of recommended brands.

827 MAT- ELEC- Supply fixing, testing and commissioning of UL 1 No 1329

04480 9.5.46 approved flexible dropper of 1.5 mtr length with
required accessories
Makes: As per list of recommended brands.

828 MAT- ELEC- Providing and fixing of Pressure Switch in the MS 1 No 2847
04481 9.5.47 pipeline including connection etc as required.
Makes: As per list of recommended brands.

829 MAT- ELEC- Providing and fixing Flow Switches in 100mm dia 1 No 6072
04482 9.5.48 MS pipe.
Makes: As per list of recommended brands.
830 MAT- ELEC- Providing and fixing Flow Switches in 150 mm dia 1 No 8476
04483 9.5.49 MS pipe.
Makes: As per list of recommended brands.
831 MAT- ELEC- Supply, installation, testing and commissioning of 1 No 759
04484 9.5.50 Bourdon type, stainless steel dial type pressure
gauge with isolation valve and pipe having
calibration of 0-16 kg/cm2.
Makes: As per list of recommended brands.

832 MAT- ELEC- Supply, installation, testing and commissioning of 1 No 1367

04485 9.5.51 25mm dia Gate valve.
Makes: As per list of recommended brands.
833 MAT- ELEC- Supply, installation, testing and commissioning of 1 No 755
04486 9.5.52 25mm dia Ball valve.
Makes: As per list of recommended brands.

Page 266 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
834 MAT- ELEC- Supply, installation, testing and commissioning of 25 1 No 1432
04487 9.5.53 / 20mm dia Air Release Valve
Makes: As per list of recommended brands.
835 ELEC- Supply, installation, testing & commissioning of sprinkler flexible pipe (UL
9.5.54 Listed) of stainless steel complete with 15 NPT on reducer thread with
maximum working pressure of 175 PSI test pressure of 875 PSI (Burst)
with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet)
15mm NPT female thread with reducer, nipple, 2 side brackets, center
bracket, stock bar of following sizes complete as required.
Makes: As per list of recommended brands.
MAT- a 750mm to 800 mm 1 No 1139
04488
MAT- b 1000 mm to 1200 mm 1 No 1329
04489
MAT- c 1500 mm 1 No 1582
04490
836 ELEC- Providing, fixing, testing & commissioning of installation control valve of
9.5.55 cast iron body, brass/bronze working parts comprising of water motor
alarm, bronze seat clapper, clapper arm and hydraulically driven
mechanical gong bell to sound continuous alarm when the wet
riser/sprinkler system activates, pressure gauges, emergency releases,
strainer, pressure switch, cock valve complete with drain valve and
bypass, test control box, ball valves, MS pipe of required size, flanges,
orifice plate, gasket etc of following sizes as required :
Makes: As per list of recommended brands.

MAT- a 80mm dia 1 No 46865

05612
MAT- b 100mm dia 1 No 49468
05613
MAT- c 150mm dia 1 No 52072
04491
837 ELEC- Supplying, installing, testing and commissioning of CI body Foot Valve
9.5.56 with brass strainer with necessary flanges, nuts and bolts etc., complete
on to the suction line.
Makes: As per list of recommended brands.

MAT- a a) 200mm nominal dia 1 Ea 29030

Page 267 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
04492
MAT- b b) 150mm nominal dia 1 Ea 15622
04493
MAT- c c) 100mm nominal dia 1 Ea 8722
04494
MAT- d d) 80mm nominal dia 1 Ea 5988
04495
838 ELEC- Supply and laying of 300mm dia NP2 RCC Hume pipe with Collars for
9.5.57 Road crossings -As per Civil SoR
839 ELEC- Supplying and wrapping the anticorrosive material for buried pipes with
9.5.58 coating of Primer and wrapping with 4 mm thick polymer corrosion
resistant tape as per IS: 10221 with 15 mm overlap as per specifications.
Makes: As per list of recommended brands.

MAT- a a) 200mm nominal dia 1 Mtr 521

04496
MAT- b b) 150mm nominal dia 1 Mtr 391
04497
MAT- c c) 100mm nominal dia 1 Mtr 352
04498
MAT- d d) 80mm nominal dia 1 Mtr 300
04499
840 MAT- ELEC- Supply, fabricating, installing structural steel 1 Kg 82
04500 9.5.59 supports for fixing all sizes of MS pipes from ceiling /
wall with MS Channels, Angles, Flats, Rods, as
required at site with anchor fasteners, Clamps,
threaded rods, nuts, bolts, washers etc complete
with painting.
841 MAT- ELEC- Fabrication ,transportation and supply of fully 1 No 24817
08784 9.5.60 outdoor type wall mounted/floor mounted automatic
control panel board with IP-66 protection for 3 phase
7.5 H.P. Motor of Booster Pump set of size 600x 600
x 250mm made of 18 SWG CRCA sheet steel
enclosure, 14 SWG mounting plate for cable entry
fabricated , painted with two coats of Red oxide
primer and two coats of Grey paint, lock and key
arrangements two side louvers with weld mesh
inside and mounted on suitable angle frame work of
450mm height on a PCC pedestal over the terrace
Page 268 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
consisting of the following equipment/ components
with all internal wiring for power and control circuits
and control wiring from sensors like pressure
switches etc., using copper FRLS cables of suitable
size and capacity and cable clamp etc complete with
DOL Starter of including cost of all materials and all
labour charges, transportation etc., complete for
finished item of work. (Panel shall be fabricated from
reputed and branded manufacturers approved by
dept and having CPRI approval with CPRI test
certificates).
Makes: As per list of recommended brands.
1) Supply & Fixing of DOL Starter suitable for 7.5 HP
Pump Motor - 1 No
2) Supply and fixing of (0-500) V range Voltmeter on
existing panel, making connection by PVC insulated
copper conductor with PVC sleeves/channel etc., as
required. -1 No
3) Supply and fixing of CT operated direct reading
type Ammeter, below 500A, on existing panel,
making connection by PVC insulated copper
conductor with PVC sleeves/channel etc. as required
- 1 No
4) Supply and fixing of selector switch for Voltmeter
& Ammeter (4 position) including making connection
etc. as required - 2 No
5) Supply and fixing of 240/220 V, LED (22.5 mm
dia) Pilot indication lamps Red, Yellow & Bue Colour
with integral circuit, terminal block, including
connection etc. as required - 3 No
6) Supply and Fixing of Single Phase Preventor of
suitable range - 1No.
7) Supply and fixing of ISI Mark suitable capacitor
8) Supply and Fixing of MPCB (Motor Protection
Circuit Breaker) suitable for 7.5 HP Motor, Icu=50 KA
with adjustable thermal and magnetic release Panel
Mounted
9) Supply and Fixing of Non-Luminous type,
ON/OFF/TRIP push button actuators and integral
contact block of dia. 22.5 mm
including making connections etc. as required.
10) Supply and Fixing of AC operated heavy duty
230 /440 Volt power contactor conforming to
IS:13947-4-1/IEC:947-4-1 having provision of
Page 269 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
mechanical interlocking, Din rail mounting type
including making connections, testing etc. as
required.
- 3 pole, 35-40A, AC3 Rating, Contactor - 1 No
11) Supply and fixing of 24 V DC, Aux Contactor with
2 NO + 2NC Contacts with suitable NO+NC ADD on
Block
12) Supply and fixing of thermal over load relay with
built in single phase protection and having at least
1NO & 1NC contacts, manual /auto reset facility
including making connection testing etc. as required
- 1 No
13) Supply and Fixing of Current Transformer, upto
150 / 5 ratio, 10 VA , class 1 accuracy with all
necessary support in existing panel including
connection etc. as required - 3 No
Control & Power wiring with suitable size of
approved make FRLS PVC flexible copper wires and
from pressure sensors etc., Earth Bus Bar, Door
Loop earthing, Ferrules, danger plate, door locks,
mounting arrangements with 40x40x6mm MS angle
iron frame, PCC and masonry work, painting for MS
angle frame with red oxide and enamel paint etc.,
and all other accessories including all labour charges
etc with connections for finished item of work
including transportation charges
842 MAT- ELEC- Providing and fixing of gun metal fire Brigade suction 7854
08785 9.5.61 Hose coupling (Draw-out Connection) with nut for
female coupling as per IS:902- 1974 complete with
100 mm dia. G.I. Suction pipe and 100 mm dia. 1No.
C.I. Foot valve flanged (to be connected to static
water tank).
Makes: As per list of recommended brands.
843 MAT- ELEC- Providing, installation, testing & commissioning of 556
08786 9.5.62 water curtain nozzle 15mm dia nickel chrome plated
brass, BSPT, K-factor as per design consideration
complete as required.
Makes: As per list of recommended brands.
844 MAT- ELEC- Supplying and fixing orifice plate made out of 6 mm 1086
08787 9.5.63 thick stainless steel (Grade 304) with orifice of
required size to be fitted between flange& landing
valve of external and internal hydrants to reduce

Page 270 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
pressure at the outlet to the level of 3.5 kg/cm2
complete as required.
Makes: As per list of recommended brands.

845 ELEC- Supply, Installation, testing and commissioning of

9.5.64 stainless steel puddle flange fabricated out of1.6mm
thick SS 304 confirming to IS specifications
including nuts, bolts and rubber insertions etc.
Makes: As per list of recommended brands.
MAT- a 150 mm dia 1 No 7315
08788
MAT- b 100mm dia 1 No 6380
08789
MAT- c 80 mm dia 1 No 4950
08790
MAT- d 65 mm dia 1 No 3300
08791
MAT- e 50 mm dia 1 No 3080
08792
846 MAT- ELEC- Supply, Erection, Testing and commissioning of
08793 9.5.65 Sluice valves as per IS:14846 (PN 10 Rating, for
suction side of the pumps) and rising spindle type
with flanges, bolts, nuts, washers, gaskets etc.
The valve shall be fitted with Supervisory switch
for monitoring.
Makes: As per list of recommended brands.
100mm dia 12100
847 MAT- ELEC- Supplying, installation, testing & commissioning of
08794 9.5.66 deluge valve (to be used for water curtains) UL listed
with wet pilot basic trim assembly for DVA with test
and alarm, drip and drain valve with water motor
gong complete as required.
Makes: As per list of recommended brands.
150mm dia 102198

848 MAT- ELEC- Providing, installation, testing & commissioning of 6204

08795 9.5.67 electric release trim assembly for deluge wall with
two way solenoid valve, weather proof operation on
24 volts DC supply complete as required.
Makes: As per list of recommended brands.

Page 271 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
849 MAT- ELEC- Providing, installation, testing & commissioning of 171
08796 9.5.68 adjustable rosette plate for 15mm dia in white
finish as per specifications complete as required.

850 ELEC- Supply & Installation, Testing and commissioning of Each 41625
9.5.69 trolley mounted, electrically operated triplex plunger
pumps with 2-H.P, 1-Phase 1450 rpm, 1-phase
motor with high pressure triplex pump of 5-0 kg/cmv
with nylon hydraulic hose pipe of 3/4" dia, 5mt height
for suction and 3/8" dia 30mt length for delivery with
all required nozzles has values, high pressure gun,
fittings etc with come of 3-core,2.5 Sq mm flexible
copper cable with 3-pin 16A top and all required
accessories and labour charges for erection, testing
including transportation etc. complete, Make of
motor: crompton, kiroken, texmo,suguna with ISI
mark, Pump: Green tech, Kisan, Ultrajet,
Pressurejet, Ambica tools, searaa or any ISI
851 ELEC- Supply and installation, testing and commissioning of Each 35000
9.5.70 trolley mounted 6.50HP high pressure petrol driven
triplex pump with hydraulic nylon pipes 3/4" dia,5mt
length for suction 3/8" dia 30mt length for delivery,
nozzles, values high pressure gun, fitting etc
complete with all required accessories and labour
charges for erection testing and transportation etc
complete.
852 ELEC- Supply & Installation, Testing and commissioning of Each 46725
9.5.71 trolley mounted, electrically operated triplex plunger
pumps with 5-H.P, 1-Phase 1450 rpm, 1-phase
motor with high pressure triplex pump of 5-0 kg/cmv
with nylon hydraulic hose pipe of 3/4" dia, 5mt height
for suction and 3/8" dia 30mt length for delivery with
all required nozzles has values, high pressure gun,
fittings etc with come of 3-core,2.5 Sq mm flexible
copper cable with 3-pin 16A top and all required
accessories and labour charges for erection, testing
including transportation etc. complete, Make of
motor: crompton, kiroken, texmo, suguna with ISI
SECTION 10
10.1 GENERATORS SPECIFICATION

Page 272 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
853 ELEC- Supply Installation Testing And commissioning of DG Set complete with
10.1.1 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP
Alternator mounted on a common base Frame & coupled through a
flexible coupling or close coupled.
Alternator: It shall be self-regulated, self-excited and confirms to IS:
13364/1992 or latest version with regulation of +5% from No load to full
load, IP23, with standard Alternator Protection (over voltage, over speed
& under voltage).
Diesel Engine: It shall have residential silencer, up to 10 M exhaust
piping, electronic / Mechanical governor, Manual & electric Start,
Batteries, Fuel tank & piping, control panel (16 G) with SPN(For 5
KVA)/TPN MCCB of required rating (25/36/50 KA) with PLC based
Engine controller supplied by OEM, Ammeter, Voltmeter, Frequency
Meter or Multi-function meter, Energy Meter & Hour Meter, Engine
instruments panel, AVM and Automatic Voltage Regulator. The diesel
engine shall be capable of providing 10% overload for 1 Hr for every 11
Hrs of continuous running at full load. The DG set shall be supplied with
initial filling of fuel, lube oil, coolant oil as per OEM specifications and
shall be tested at site.
Acoustic Enclosure: Weatherproof, powder coated Acoustic enclosure
for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet
steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and
filled with foam as per CPCB norms latest amendments & IS 8183. The
doors are fabricated from 1.6 mm CRCA sheet packed with acoustic
material, floor of MS chequered plate 5.0 mm thick, all doors/ opening are
sealed with neoprene/ EPDN gaskets.
The DG Set shall be maintained for two years after commissioning by the
supplier including regular servicing, cost of consumables etc complete as
specified by the OEM along with warranty for two years.
The enclosure has built in fuel tank, residential silencer (isolated from
main DG chamber) with protection and tripping of DG set against
temperature of more than 50 °C. All controls for operation of DG set are
from outside the enclosure with DG control panel having processor based
genset monitoring and control system MCCB/ACB Ammeter, voltmeter,
PF meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside
enclosure, visible and accessible from outside. The enclosure should be
suitable for following capacity DG sets and alternator. Noise level is less
than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms, complete in
all respect of following capacity:
Radiator Cooled and Turbocharged
a 5 kVA at 0.8 pf 230V 50Hz 1-Ø 1 No 150000
b 10 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 235000

Page 273 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- c 15 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 340000
04501
d 20 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 357000
e 25 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 399000
MAT- f 30 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 440000
04502
MAT- g 40 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 548000
04503
MAT- h 62.5kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 630000
04504
MAT- i 125 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 825000
04505
(a to i) Makes: As per list of recommended brands.
MAT- j 160 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 1080000
04506

k 200 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 1296000

MAT- l 250 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 1550000
04508
MAT- m 320 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 2250000
04509
MAT- n 380 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 2870000
04510
( j to n) Makes: As per list of recommended brands.
MAT- o 500kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 3150000
04511
MAT- p 625 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 3800000
04512
MAT- q 750 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 4730000
04513
MAT- r 1000 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 5700000
04514
MAT- s 1250 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 7700000
04515

Page 274 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- t 1500 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 8740000
04516
( o to t ) Makes: As per list of recommended brands.
854 ELEC- Supply Installation Testing and Commissioning of AUTO MAINS
10.1.2 FAILURE (AMF) Panel with IP 52 protection, fabricated from CRCA
sheet steel 2mmThick , Powder coated finish , Engine START & STOP
commands, control RELAYS, selector switches for Ammeter &
Voltmeter, Ammeter & Voltmeter ,4pole MCCBs for EB Supply and DG
Supply of required rating and breaking capacity, automatic battery
charger(External charger for DG) Control & Power Contactors, Timers,
Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator
interface panel complete in all respect suitable for following capacity DG
sets:

MAT- a 25 to 40 KVA 1 No 86625

04517
MAT- b 50 to 63.5 KVA 1 No 127050
04518
MAT- c 80 to 160 KVA 1 No 179025
04519
MAT- d 180 to 250 KVA 1 No 242550
04520
MAT- e 320 to 500 KVA 1 No 300300
04521

MAT- f deleted 1 No
04522
MAT- g Deleted 1 No
04523
MAT- h deleted 1 No
04524
855 MAT- ELEC- Supply and fixing of Thermal Insulation with Mtr 251
04525 10.1.3 asbestos Rope for Exhaust pipe
856 MAT- ELEC- Supply and fixing of Thermal Insulation with Mtr 1247
04526 10.1.4 Rock/Glass Wool with Aluminum cladding (Density -
96 Kg/m3 thickness -50mm) for Exhaust pipe

Page 275 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
CPCB IV

857 10.1.5 Supply Installation Testing And commissioning of

CPCB IV+ DG Set complete with 1500 RPM Diesel
Engine of suitable BHP & AC Brush less Alternator
mounted on a common base Frame & coupled
through a flexible coupling or close coupled.
Alternator 1. 1500 RPM, 1P or 3P, Brushless type,
screen protected, revolving field, Self-excited
alternator conforming to IS/IEC 60034-1 IP23, with
standard Alternator Protection (over voltage, over
speed & Under voltage) 2. A reliable long life with
superior class 'H' insulation with temperature rise to
Class H
Diesel Engine: Engine: Engine should comprise of
Silencer, Electronic governor from >25 KVA &
above, suitable rating battery , Battery charging
alternator, battery charger , Inbuilt Fuel tank with fuel
pipe, AVM pads , Control panel with 3P MCCB of
suitable rating with short circuit protections (
25kA,36kA, 50kA) with microprocessor based
controller indicating genset parameters ( i.e. volt,
amps, KWH, KVAR, Hrs etc.), The diesel engine
shall be capable of providing 10% overload for 1 Hr
for every 11 Hrs of continuous running at full load.
The DG set shall be supplied as per OEM
specifications and shall be tested at site along with
below.
1. CRDI Engine >25 KVA DG set
2. Water cooled Radiator coupled to engine
3. Dry type air cleaner with service indicator
4. First fill of lube oil, Coolant & first fill of Diesel
5. Electrical starter motor with soft start System
6. Battery charging alternator
7. Remote Monitor system >58.5 KVA & Above
8. 2 years / 5000 Hrs Warranty from commissioning
or 30-month form supply.
9. Emission control system - EGR & (DOC, SCR for
>75 KVA DG set)
10.10 Mtrs Exhaust pipe from Silencer
Genset Controller: 1. Microprocessor based genset
monitoring, metering and control system with full
graphics LCD display for easy front panel access.
2. AMF relay, manual and remote start / stop modes

Page 276 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
for 1-ph & 3-ph gensets
3. Backlit and full graphics display with power saving
feature
4. Engine parameter monitoring -Lube oil pressure,
Engine coolant temperature, Fuel level, Battery
voltage, Engine running hours
5. AC Alternator parameter monitoring -Voltage L-N
& L_L, Current, kW, kVA (Phase & Total),
Frequency, kWH, PF
6. Genset Protection: Engine: Low lube oil pressure,
High coolant temperature, Battery High/Low Volts,
Fail to Start, Sensor failure, Low fuel level,
Overspeed AC Alternator: Over/Under Voltage,
Over/Under, Frequency, Loss of AC sensing, Over
frequency, Over Current, kW Overload, Unbalancing
load
7. Maintenance notification based on Engine Run
Hour & due date
8.Communication: USB port, RS485, CAN
9.30-50 Event logs
Acoustic Enclosure: 1. Specially designed to meet
stringent MOEF/CPCB IV+ norms
2. Weatherproof, powder coated Acoustic enclosure
for DG set for sound attenuation fabricated from 1.2
mm / 1.6 mm CRCA sheet steel (structure) with side
wall fabricated from 1.2mm /1.6 mm CRCA sheet
and filled with PU Foam/Rockwood for Fire retardant
acoustic and for better safety
3. Designed to operate in extreme climatic conditions
in temperatures ranging from -10 deg to 55 deg
without any external aid
4. Fabricated base frame with AVM pads.
5. Noise level is less than 75 db (A) at a distance of
1 Mtrs as per CPCB norms, complete in all respect.
following capacity:
Radiator Cooled and Turbocharged
a 5 kVA at 0.8 pf 230V 50Hz 1-Ø 1 No 277200

b 10 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 369735

c 15 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 387784
d 20 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 429495

Page 277 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
e 25 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 567321

f 30 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 605617

g 40 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 684583

h 58.5kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 801376

i 125 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 1342246

(a to i ) Makes: As per list of recommended brands.

j 160 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 1796054

k 200 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 2269705

l 250 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 2483965

m 320 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 3219482

n 380 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 4281860

(j to n) Makes: As per list of recommended brands.

o 500kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 5264424

p 625 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 6528148

q 750 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 6947600

r 1000 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 8162000

s 1250 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 11058062

t 1500 kVA at 0.8 pf 415V 50Hz 3-Ø 1 No 12826704

(o to t) Makes: As per list of recommended brands.

SECTION 11
11.1 INVERTERS and ONLINE UPS SYSTEMS
858 ELEC- Supply and installation of ……. inverter (home UPS system) pure sine
11.1.1 wave output, single phase input / Single phase output.
Makes: As per list of recommended brands.
MAT- a 800 VA, 12 V DC 1 No 9350
04527
MAT- b 1400 VA, 24 V DC 1No 13200

Page 278 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
04528
MAT- c 2000 VA, 36 V DC 1No 18700
04529
859 ELEC- Supply installation Testing and commissioning of .......... KVA on line
11.1.2 UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1: 2008
with IGBT technology pure sine wave output, double conversion with auto
and manual static by pass switch single phase input / Single phase
output.
Makes: As per list of recommended brands.
MAT- a 2.0 KVA, 72/96VDC 1 No 31126
04530
MAT- b 3.0 KVA, 72/96 VDC 1 No 42798
04531
MAT- c 3.0 KVA, 72/96 VDC with Isolation Transformer 1 No 56376
04532
MAT- d 6.0 KVA, 192/240 VDC with Isolation Transformer 1 No 96944
04533
MAT- e 7.0 KVA, 192/240 VDC with Isolation Transformer 1 No 117078
04534
MAT- f 10.0 KVA, 192-240 VDC with Isolation Transformer 1 No 140941
04535
860 ELEC- Supply installation Testing and commissioning of .......... KVA on line
11.1.3 UPS system as per IEC 62040-I (Safety), IEC 62040-3 (Performance) for
critical IT solutions, fully digital IGBT Converter and Inverter, SCR rectifier
with Internal /External isolation transformer from DC to AC, PWM, pure
sine wave output, double conversion, output pf 0.8, with paralleling
facility, standard communication features/options auto and manual static
by pass switch three phase input / Three phase output. acoustic level
shall be less than 58dB at 1 mtr distance.
Makes: As per list of recommended brands.
MAT- a 10.0 KVA 312/360 V DC 1 No 270250
04536
MAT- b 15.0 KVA 312/360 V DC 1 No 316250
04537
MAT- c 20.0 KVA 312/360 V DC 1 No 327750
04538
MAT- d 30.0 KVA 360/384/480 V DC 1 No 408250
04539
Page 279 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- e 40.0 KVA 360/384/480/504 V DC 1 No 494500
04540
861 ELEC- Supply installation Testing and commissioning of .......... KVA on line
11.1.4 UPS system as per IEC 62040-I(Safety), IEC 62040-3 (Performance) for
critical IT solutions, fully digital IGBT Converter and Inverter,SCR rectifier
with Internal /External isolation transformer from DC to AC, PWM, pure
sine wave output, double conversion ,output pf 0.8, with paralleling facility
, standard communication features/options auto and manual static by
pass switch three phase input / Three phase output. Acoustic level shall
be less than 58dB at 1 mtr distance.
Makes: As per list of recommended brands.
MAT- a 60 KVA 480/504/528/600/720 V DC 1 No 735000
04541
MAT- b 80.0 KVA 480/504/528/600/720 V DC 1 No 845000
04542
MAT- c 100.0 KVA 480/504/528/600/720 V DC 1 No 1085000
04543
MAT- d 120.0 KVA 480/504/528/600/720 V DC 1 No 1210000
04544
MAT- e 160.0 KVA 480/504/528/600/720 V DC 1 No 1410000
04545
MAT- f 200.0 KVA 480/504/528/600/720 V DC 1 No 1725000
04546
862 MAT- ELEC- Supply and providing of UPS cum battery rack up to 1 No 1650
04547 11.1.5 4 batteries
863 MAT- ELEC- Supply and providing of battery rack for 5 to 10 1 No 3300
04548 11.1.6 batteries (42 AH)
864 MAT- ELEC- Supply and providing of battery rack upto 11 to 20 1 No 5500
04549 11.1.7 batteries (42 AH)
865 MAT- ELEC- Supply and providing of battery rack upto 20 to 30 1 No 9900
04550 11.1.8 batteries (65 & 100 AH)
866 MAT- ELEC- Supply and fixing of 12V 26 AH SMF battery with 3 1 No 3520
04551 11.1.9 years warranty, including wire leads, connections etc
complete.
Makes: As per list of recommended brands.
867 MAT- ELEC- Supply and fixing of 12V 42 AH SMF battery with 3 1 No 6270
04552 11.1.10 years warranty including wire leads, connections etc
complete.
Page 280 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Makes: As per list of recommended brands.

868 MAT- ELEC- Supply and fixing of 12V 65 AH SMF battery with 3 1 No 7128
04553 11.1.11 years warranty including wire leads, connections etc
complete.
Makes: As per list of recommended brands.
869 MAT- ELEC- Supply and fixing of 12V 100 AH SMF battery with 3 1 No 11484
04554 11.1.12 years warranty including wire leads, connections etc
complete.
Makes: As per list of recommended brands.
870 MAT- ELEC- Supply and fixing of 12V 120/130 AH SMF battery 1 No 12276
04555 11.1.13 with 3 years warranty including wire leads,
connections etc complete.
Makes: As per list of recommended brands.
871 MAT- ELEC- Supply and fixing of 12V, 150 AH SMF battery with 3 1 No 17160
04556 11.1.14 years warranty including wire leads, connections etc
complete.
Makes: As per list of recommended brands.
872 MAT- ELEC- Supply and fixing of 12V, 200 AH SMF battery with 3 1 No 23760
04557 11.1.15 years warranty including wire leads, connections etc
complete.,
Makes: As per list of recommended brands.
873 ELEC- Supply and fixing of 12V, 100 AH Tubular battery 1 No 11766
11.1.16 including wire leads
Makes: As per list of recommended brands.

874 MAT- ELEC- Supply and fixing of 12V, 150 AH Tubular battery 1 No 15610
04559 11.1.17 including wire leads.
Makes: As per list of recommended brands.

875 ELEC- Supply and fixing of 12V, 200 AH Tubular battery 1 No 18627
11.1.18 including wire leads.
Makes: As per list of recommended brands.

SERVO CONTROLLED VOLTAGE STABILISERS

Page 281 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
876 ELEC- Supply, Installation, Testing & Commissioning of Micro controller based
11.2.1 confirming to IS:9815 IP 20 Servo Controlled 3 phase voltage stabilizer
with Input Voltage Range: 340-480 V, Output Voltage : 415V ± 1% ( 230V
Phase ) Rated supply frequency : 47 - 53 Hz Ambient Temperature : 45°
C Continuous Duty cycle with low voltage/High Voltage/Over load/Short
Circuit/single phase prevention protections,3 Nos sensing Transformers,
Correction rate :30 V/sec, Input on, Input Low, Input High, Output On,
Output Cutoff, Auto / Manual Selector switch, Increase / Decrease
Selector switch, Volts adj. Potentiometer, Voltmeter to read input and
Output Voltage with Selector switch, Ammeter to read the Output current
3 phase SCVS, Input MCCB, Bypass, Output Contactor, Type Air Cooled
etc., complete with all labour charges and with connections.
a 10 KVA 1 No 47700

b 15 KVA 1 No 51700

C 20 KVA 1 No 60700

D 30 KVA 1 No 84400

E 40 KVA 1 No 81000

F 50 KVA 1 No 104950

G 60 KVA 1 No 122600

H 75/80 KVA 1 No 156900

i 100 KVA 1 No 191600

SECTION – 12

12.1 TEMPORARY ILLUMINATION

Page 282 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
877 HIR- ELEC- Hire charges for Temporary illumination, consisting 1 No 43
00241 12.1.1 of 20W LED tube light complete with required
switchgears with continuous earth wire duly
erected and dismantled with required scaffolding
including cost and conveyance of all materials and
labour charges etc., complete for one day.
878 HIR- ELEC- Hire charges for Temporary illumination, consisting 1 No 354
00242 12.1.2 of flood light fitting 1000/500W complete halogen
fitting with lamp, holders, mains and required
switchgears with continuous earth wire erected
and dismantled with required scaffolding for one day.
879 HIR- ELEC- Hire charges for Temporary illumination, consisting 1 No 416
00243 12.1.3 of 400W Metal halide flood light fitting with lamp,
holders, mains and required switchgears with
continuous earth wire erected and dismantled
with requird scaffolding for one day.

880 HIR- ELEC- Hire charges for Temporary illumination, consisting 1 No 456
00244 12.1.4 of 400W Metal Halide flood light fitting with Coloured
lamp (Blue / Pink / Yellow / Red etc.,) holders, mains
and required switchgears with continuous earth
wire erected and dismantled with required
scaffolding for one day.

881 HIR- ELEC- Hire charges for Temporary illumination, consisting 1 No 440
00245 12.1.5 of 54 W LED RGB Parcan light fitting non integral,
weather proof die cast aluminum housing with IP66
protection with control gear box, control gear with
required cables, holder, mains duly erected with
required scaffolding and dismantled on existing
poles including cost and conveyance of all materials
and labour charges etc., complete for one day.
882 HIR- ELEC- Hire charges for providing temporary illumination 1 No 507
00246 12.1.6 consisting of flood light fitting 150/200 W complete
LED fitting with lamp, complete required switchgear
erected and dismantled with using scaffolding for
one day.

883 HIR- ELEC- Hire charges for temporary illumination consisting of 1000 1589
00247 12.1.7 strip lights 8mm LED lights of various colors (Navar Nos
Patta) complete with holders, required wire leads

Page 283 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
erected and dismantled including required
scaffolding and T&P including cost and conveyance
of all materials and all labour charges etc., complete
for one day.
884 HIR- ELEC- Hire charges for temporary illumination consisting of 1000 1092
00248 12.1.8 white color series lights with miniature lamps of 8mm Nos
LED lights with required wire leads erected and
dismantled including required scaffolding and T&P
including cost and conveyance of all materials and
all labour charges etc., complete for one day.
885 HIR- ELEC- Hire charges for temporary illumination consisting of 1000 1352
00249 12.1.9 LED RGB pixel series strip lights 8mm LED lights of Nos
various colors (Navar Patta) complete with holders,
required wire leads erected and dismantled including
required scaffolding and T&P including cost and
conveyance of all materials and all labour charges
etc., complete for one day.
886 HIR- ELEC- Hire charges for temporary illumination consisting 1000 867
00250 12.1.10 LED, RGB pixel series lights with miniature lamps of Nos
8mm LED lights with required wire leads erected
and dismantled including required scaffolding and
T&P including cost and conveyance of all materials
and all labour charges etc., complete for one day.
887 HIR- ELEC- Hire Charges for National Flag of size 1 No 6064
00251 12.1.11 8"x4"Comprising LEDs with required wire leads and
switch gear etc., complete for one day.

889 HIR- ELEC- Hire charges for supply and maintaining of oscillating 1 No 194
00252 12.1.12 type pedestal air circulators 600/900 mm
connected with necessary mains, required
switchgears with continuous earthing maintaining
the same during the function and including
dismantling for one day.

890 HIR- ELEC- Hire charges for supply and maintaining of oscillating 1 No 179
00253 12.1.13 type pedestal fan 16" (400 mm) or ceiling fan
connected with necessary mains, required
switchgears with continuous earthing maintaining
the same during the function and including
dismantling for one day.
891 HIR- ELEC- Hire charges for providing 1.1KW , 24500 m3/Hr Air 1 No 1504
Page 284 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
00254 12.1.14 cooler and required materials with necessary mains
switch gear with continues earth lead during function
duly removing including cost and conveyance of all
materials and labour charges etc., complete for one
day.
892 HIR- ELEC- Hire charges for supply and maintaining of heavy 1 No 179
00255 12.1.15 duty exhaust fan 18" or 24” connected with
necessary mains, required switchgears with
continuous earthing maintaining the same during the
function and including dismantling for one day.
893 HIR- ELEC- Hire charges for supply and maintaining of plug 1 No 75
00256 12.1.16 points with 16A/6A 5 Pin socket and switch with
necessary mains, required switchgears and
continuous earth connection for one day.
894 HIR- ELEC- Hire charges for supply and maintaining 280 liters 1 No 607
00257 12.1.17 capacity refrigerator complete with M.S. stand if
necessary, connected with mains, switchgear and
continuous earthing maintaining the same during the
function and including dismantling for one day.
895 HIR- ELEC- Hire charges for supply and maintaining 120/150 1 No 1335
00258 12.1.18 liter capacity water cooler with water filter (candle
type or UV tube) with M.S. stand complete with
minor plumbing work if necessary connected with
mains, required switchgears and continuous earthing
maintaining the same during the function and
including dismantling for one day.
896 HIR- ELEC- Hire charges for supply and maintaining 20"/24" 1 No 437
00259 12.1.19 colour television with multi channel tuner,
connected with necessary mains, required
switchgears with continuous earthing maintaining
the same during the function and including
dismantling for one day.

897 HIR- ELEC- Providing and maintaining temporary LCD/LED 1 No 909

00260 12.1.20 colour T.V. (32''to 42'' size) and positioning at site
with required cabling as per direction of authority,
duly connecting and testing for one day.
898 HIR- ELEC- Hire charges for supply and maintaining 6V/10V with 1 No 122
00261 12.1.21 20/40 Watt fluorescent emergency lamp connected
with necessary mains, required switchgears and
continuous earthing maintaining the same during the
Page 285 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
function and including dismantling for one day.

899 HIR- ELEC- Hire charges for supply and maintaining digital 1 No 6186
00262 12.1.22 projector with spring loaded white screen connected
with necessary mains, required switchgears and
maintaining the same during the function including
dismantling for one day.
900 HIR- ELEC- Hire charges for providing 1.5/2.0 Ton capacity split 1 No 5326
00263 12.1.23 type air conditioning unit complete with temporary
stand and fabrication work and required material to
achieve cooling temperature connected along with
necessary mains, required switchgears and
continuous earthing maintaining the same during the
function and including dismantling for one day.

901 HIR- ELEC- Hire charges for providing 3.5 Ton capacity tower 1 No 6086
00264 12.1.24 type air conditioning unit complete with temporary
stand and fabrication work and required material to
achieve cooling temperature connected along with
necessary mains, required switchgears and
continuous earthing maintaining the same during the
function and including dismantling for one day.

902 HIR- ELEC- Hire charges for providing 4.5 Ton capacity tower 1 No 6973
00265 12.1.25 type air conditioning unit complete with
temporary stand and fabrication work and required
material to achieve cooling temperature
connected along with necessary mains,
required switchgears and continuous earthing,
maintaining the same during the function and
including dismantling for one day.

903 HIR- ELEC- Hire charges for providing 6.5Ton/7.5Ton capacity 1 No 8241
00266 12.1.26 tower type air conditioning unit complete with
temporary stand and fabrication work and
required material to achieve cooling temperature
connected along with necessary mains,
required switchgears and continuous earthing,
maintaining the same during the function and
including dismantling for one day.
Page 286 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
904 HIR- ELEC- Hire charges for providing, maintaining and 1 No 9096
00267 12.1.27 operating temporary public address system on
hire consisting 02 Nos. solid state heavy wattage
amplifier 250 watts ( one for working and another for
stand by emergency ) working on AC / generator and
24 volt car battery supply, 06 Nos. of matching of
100 volt line (200 watts) box type speakers/sound
column, 02 Nos super sensitive microphone with
suitable size of microphone holding stand. The
system shall be in a fully automatic changeover
operation in case of failure of supply for one day.

905 HIR- ELEC- Hire charges for providing and maintaining 1 No 424
00268 12.1.28 temporary additional box type speaker of 100 Volt
line (100 watts ) for one day.

906 HIR- ELEC- Hire charges for providing and maintaining 1 No 2947
00269 12.1.29 temporary cordless (Hand type or lap type ) super
sensitive HUF microphone (1 no stand by) for one
day.

907 HIR- ELEC- Providing temporary line matching transformer (40- 1 No 243
00270 12.1.30 XT) for speakers having distance more than 60 Mtrs
from Amplifiers and maintaining the same for one
day.
908 HIR- ELEC- Hire charges for providing, maintaining and 1 No 3032
00271 12.1.31 operating fingertip switcher of 8 ways to operate the
public address system between dias and participants
in the hall with necessary cabling, wiring etc for one
day.
909 HIR- ELEC- Hire charges providing and maintaining all in one 1 No 1213
00272 12.1.32 desktop PC with following configuration Intel TM
second generation core i3 G630,2GB DDR3 RAM,
1TB HARD DISK, DVDR W optical drive 20'' LED
screen, web camera, wifi, Bluetooth, keyboard
and mouse, media card reader etc for one day.

910 HIR- ELEC- Hire charges providing and maintaining Laser 1 No 364
00273 12.1.33 Printer, resolution (in dpi) mono 600, paper size A4,
print speed in PPM (A4 size) 25, Port: 1 USB,
memory (in MB): NA network card 10/100:YES,

Page 287 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Duplexing: YES etc for one day.

911 HIR- ELEC- Hire charges for providing and maintaining 1 KVA 1 No 2001
00274 12.1.34 online UPS pure sine wave suitable for 30 minutes
battery backup to provided computer with necessary
interconnecting cabling, wiring etc for one day.
912 HIR- ELEC- Hire cahres for providing and maintaining temporary 1 No 1213
00275 12.1.35 1400 VA to 1600 VA digital pure sine wave Invertor
based on IGBT technology suitable for 120 minutes
battery backup to electrical installation with
necessary interconnecting cabling, wiring etc for one
day.

913 HIR- ELEC- Hire charges for supply and fixing distribution main 1 No 1633
00276 12.1.36 board consisting of 400A/250A 4pole MCCB with
bus bar arrangement 12 Nos 63A fuse units as
outgoing including conveyance of all materials and
all labour charges etc., complete for one day.
914 HIR- ELEC- Hire charges for Supply & Fixing of Distribution 1 No 1666
00277 12.1.37 board of load main board consisting of 400A MCCB
4 pole with Busbar arrangement and 12 Nos 63A
fuse units as outgoing including conveyance of all
materials and all labour charges etc., complete for
one day.
915 HIR- ELEC- Hire charges for Supply & Fixing of Distribution 1 No 1599
00278 12.1.38 board of load main board consisting of 250A MCCB
4 pole with Busbar arrangement and 12 Nos 63A
fuse units as outgoing including conveyance of all
materials and all labour charges etc., complete for
one day.
916 HIR- ELEC- Hire charges for supply and maintaining towards 1 No 371
00279 12.1.39 supply and fixing of 200A 4 pole Changeover / TPN
switches including erection and dismantling and cost
and conveyance of all materials and labour charges
complete for one day.
917 HIR- ELEC- Hire charges for supply and fixing distribution main 1 No 1579
00280 12.1.40 board consisting of 400A/250A 4pole change over
switch with bus bar arrangement 12 Nos 63A fuse
units as outgoing including conveyance of all
Page 288 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
materials and all labour charges etc., complete for
one day.
918 HIR- ELEC- Hire charges for supply and fixing distribution main 1 No 1525
00281 12.1.41 board consisting of 250A 4pole change over switch
with bus bar arrangement 12 Nos 63A fuse units as
outgoing including conveyance of all materials and
all labour charges etc., complete for one day.
919 HIR- ELEC- Hire charges for Supply and maintaining towards 1 No 1407
00282 12.1.42 supply and fixing of 4 way TPN DB with 1 No 125 TP
MCCB and 12Nos 6-32A 10kA SP MCBs including
erection and dismantling and cost and conveyance
of all materials and labour charges complete for one
day.
920 HIR- ELEC- Hire charges for Supply and maintaining towards 1 No 1456
00283 12.1.43 supply and fixing of 6 way TPN DB with IP-43
Protection with 1 No 125 FP MCCB and 18Nos 6-
32A 10kA SP MCBs including erection and
dismantling and cost and conveyance of all materials
and labour charges complete for one day.
921 HIR- ELEC- Hire charges for providing industrial type panel board 1 No 563
00284 12.1.44 consisting of bus bar chamber with 200/250 amps
incoming TP/MCCB as incomers switch, 12 no’s 63
amps fuse unit, earth wire erected and dismantled all
accessories etc., complete for one day.
922 HIR- ELEC- Hire charges for supply and installing and 1 Mtr 6
00285 12.1.45 maintaining towards supply and run of 1 of 6/10
Sq.mm WPTC / 2 of WPSC / VIR cable with
necessary terminations etc. complete for one day.
923 HIR- ELEC- Hire charges for supply and installing and 1 Mtr 30
00286 12.1.46 maintaining towards supply and run of 16 Sq.mm to
35 Sq mm x 3 1/2 core cable / 4 of single core 16 Sq
mm to 35 Sq mm cable with necessary terminations
etc. complete for one day.
924 HIR- ELEC- Hire charges for supply and installing and 1 Mtr 34
00287 12.1.47 maintaining towards supply and run of 50Sq mm to
95 Sq.mm x 31/2 core cable / 4 of single core 50Sq
mm to 95Sq mm cable with necessary terminations
etc. complete for one day.

Page 289 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
925 HIR- ELEC- Hire charges for supply and installing and 1 Mtr 32
00288 12.1.48 maintaining towards supply and run of 50 Sq mm x 3
1/2 core cable / 4 of single core 50 Sq mm cable with
necessary terminations etc. complete for one day.

926 HIR- ELEC- Hire charges for supply and installing and 1 Mtr 35
00289 12.1.49 maintaining towards supply and run of 95 Sq.mm x
31/2 core cable / 4 of single core 95Sq mm cable
with necessary terminations etc. complete for one
day.
927 HIR- ELEC- Hire charges for supply and installing and 1 Mtr 36
00290 12.1.50 maintaining towards supply and run of 120 Sq.mm x
3 1/2 core cable / 4 of single core 120 Sq.mm cable
with necessary terminations etc. complete for one
day.
928 HIR- ELEC- Hire charges for supply and installing and 1 Mtr 39
00291 12.1.51 maintaining towards supply and run of 185 Sq.mm x
3 1/2 core cable / 4 of single core 185 Sq.mm cable
with necessary terminations etc. complete for one
day.
929 HIR- ELEC- Hire charges for Supply and erection of MS Single 1 No 1905
00292 12.1.52 pole structure of 20’ (6.00 Mtrs.) with necessary
cross arms and hardware materials for fixing
halogen / Metal halide fittings etc., and dismantling
and cost and conveyance of all materials and all
labour charges complete for one day.
930 HIR- ELEC- Hire charges for Supply and erection of 4 pole 1 No 2527
00293 12.1.53 structure of 4 of 25' (7.50 Mtrs.) GI pipe of 63/80mm
dia with necessary cross arms and hardware
materials for fixing halogen / Metal halide fittings with
suitable earthing arrangements and dismantling and
cost and conveyance of all materials and all labour
charges complete for one day.
931 HIR- ELEC- Hire charges for Supply and erection of 6 pole 1 No 3800
00294 12.1.54 structure of 6 of 25' (7.50 Mtrs.) GI pipe of 63/80mm
dia with necessary cross arms and hardware
materials for fixing halogen / Metal halide fittings with
suitable earthing arrangements and dismantling and
cost and conveyance of all materials and all labour
charges complete for one day.

Page 290 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
932 HIR- ELEC- Hire charges for providing, commissioning and 1 Job 8659
00295 12.1.55 maintaining CCTV system with 8 channel NVR, IP
video/audio input - 1 no, IP based 2.0 MP, Full HD,
IR IP dome camera - 2 nos, IP based 2.0 MP, Full
HD, IR IP PTZ camera - 2 nos, 2TB Hard Disk - 2
no, 32'' Full H D professional Display - 1 no, 8 port
PoE Switch - 1 no, Power supply unit to camera - 1
no, On Line UPS - 1 no with necessary mains,
switchgears for one day
933 HIR- ELEC- Hire charges for providing, commissioning and 1 No 1074
00296 12.1.56 maintaining IP based 2.0 MP, full HD, IR IP dome /
bullet camera with necessary Cat 6 cables etc., for
one day.

934 HIR- ELEC- Hire charges for providing, commissioning and 1 No 2983
00297 12.1.57 maintaining IP based 2.0 MP, Full HD, IR IP PTZ
camera with necessary Cat 6 cables etc., for one
day.

Note:- 1) The Rates for all the items are for one glowing /
working day

2) Allow 50% of the rate for each day upto 3 days

(i.e, 2nd and 3rd day) (Except items 12.1.23 to
12.1.26).
3) For each additional day after 3 days, but not
exceeding 15 days, allow 25% rate.

4) For more than 15 days allow 10% per day but

total rental charges shall not exceed 80% of the
capital cost of the item.
5) For item no. 12.1.22 the rate of projector is for 1
function or for max. period of 1 day whichever is
more, including transportation, connections with
projector, operator till completion of function.
6) For item No 12.1.23 to 12.1.26, the rate is for one
day, For subsequent days (i.e, 2nd to 8th day) allow
75% of the above rate, after 8th day allow 50%
the rate.
12.2 Hiring of Generators
Page 291 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
935 HIR- ELEC- Hire charges for supplying and maintaining 62.5KVA, 1 No 8653
00298 12.2.1 415V, 50 cycles A.C. Generating set with acoustic
enclosure as per IS Specification with DCM 4
Wheeler Vehicle with all standard accessories such
as control panel, batteries etc. complete excluding
cost of fuel, for one day.
936 HIR- ELEC- Hire charges for supplying and maintaining 125KVA 1 No 9890
00299 12.2.2 415V 50 cycles A.C. Generating set with acoustic
enclosure as per IS Specification with DCM 4-
Wheeler Vehicle with all standard accessories such
as control panel, batteries etc. complete excluding
cost of fuel, for one day.
937 HIR- ELEC- Hire charges for supplying and maintaining 250KVA 1 No 13852
00300 12.2.3 415V 50 cycles A.C. Generating set with acoustic
enclosure as per IS Specification with DCM 4
Wheeler Vehicle with all standard accessories such
as control panel, batteries etc. complete excluding
cost of fuel, for one day.

Note:- 1) Above rates are applicable for per one day only.
2) For subsequent days the above rate shall be
reduced by 25% after 8th day reduce the rate by
50%
3) Diesel cost will be paid extra for running hours at
the prevailing rates.

4) For test run, The minimum requirement of the fuel

shall be borne by the contractor.

5) The D.G set should be in good condition and the

life of set shall not be beyond 10 years.

13.1 LIFTS (New Installation)

938 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1Job 1303592
08534 13.1.1 Electric Traction Passenger Lift of Makes: As per list
of recommended brands. with
• Rated capacity :- 8 Passenger/544Kg
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MRL
• Rated speed :- 1.0/1.25mps VS
• Doors type :- COPO/TOPO Doors with frame
Page 292 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
having clear opening of 800 mm wide x 2000 mm
high made from SS 304 grade sheet of 1.5mm, thick
in hairline finish for car and all landing doors with SS
door architraves/frames
• Lift car enclosure made from SS 304 grade sheet
of 1.5mm, thick with hairline finish with frame made
from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron,
with necessary false ceiling with adequate LED
lights, blower/fan for ventilation & SS chequered
plate flooring, handrails, mirror, emergency light etc.
COP with SS face plate having metallic push buttons
with Braille Code & luminous indicator around button
with FPI, scrolling UP/DN LED indicator &
with/without attendant key switch, OWD with audio-
visual alarm, VAS in Telugu & English with intercom
system with telephone instrument in Lift car, LMR &
FCC/ground floor
Clear Car size of ......mm wide x ......mm deep x
......mm high
• LOP with SS face plate having recess/surface push
button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille
Code & luminous indicator around button with CPI,
Lift car arrival & next travel direction audio-visual
indication at all landings
Lift controller based on microprocessor/ PLC with
VVVF Drive having closed loop control system, with
IBMS compatible having necessary port, control
panel duly wired with proper size & strength copper
wire for power & control circuit, with provision for
addition of floor/control card & allied accessories
control panel having enclosure of 1.5mm CRCA
sheet with powder coating with IP54 Protection class
• ARD complete with necessary SMF VRLA
batteries
• Fireman controller having fireman switch at fire
Landing,
Lift Machine of Gearless PMSM of suitable kW with
Traction pulley, OSG, electromagnetic brakes, entire
assembly mounted on adequate size girders duly
fixed on LMR floor/ shaft walls complete with
main/diverter traction sheaves, suspension wire
ropes/belts of adequate size & strength
Page 293 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
• Other mechanical parts such as 'T' section
adequate size guide rails for car & counter weight
with brackets fasteners, counter weight frame with
necessary blocks, buffers with necessary support
arrangement, MS pit ladder etc. erected with
necessary steel work
Minor civil work for alteration if any and erection of
door frames and accessories, erection buffers,
erection of lift machinery, adequate size core cuts if
required & scaffolding for erecting guide rails fixing
of girders for mounting lift machine etc. complete as
per specification no. LFT.
•Lift shaft available having clear size of ......mm wide
x
......mm deep. ......mm Pit depth, ………mm
Overhead.
939 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1Job 1559413
08535 13.1.2 Electric Traction Passenger Lift of Makes: As per list
of recommended brands.
with
• Rated capacity :- 10 Passenger/680Kg
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MRL
• Rated speed :- 1.0/1.25mps VS
• Doors type :- COPO/TOPO Doors with frame
having clear opening of 800 mm wide x 2000 mm
high made from SS 304 grade sheet of 1.5mm, thick
in hairline finish for car and all landing doors with SS
door architraves/frames
• Lift car enclosure made from SS 304 grade sheet
of 1.5mm, thick with hairline finish with frame made
from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron,
with necessary false ceiling with adequate LED
lights, blower/fan for ventilation & SS chequered
plate flooring, handrails, mirror, emergency light etc.
• COP with SS face plate having metallic push
buttons with Braille Code & luminous indicator
around button with FPI, scrolling UP/DN LED
indicator & with/without attendant key switch, OWD
with audio-visual alarm, VAS in Telugu & English
with intercom system with telephone instrument in
Lift car, LMR & FCC/ground floor.
Page 294 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Clear Car size of ......mm wide x ......mm deep x
......mm high

• LOP with SS face plate having recess/surface push

button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille
Code & luminous indicator around button with CPI,
Lift car arrival & next travel direction audio-visual
indication at all landings
• Lift controller based on microprocessor/ PLC with
VVVF Drive having closed loop control system, with
IBMS compatible having necessary port, control
panel duly wired with proper size & strength copper
wire for power & control circuit, with provision
for addition of floor/ control card & allied accessories
control panel having enclosure of 1.5mm CRCA
sheet with powder coating with IP54 Protection class
• ARD complete with necessary SMF VRLA
batteries
• Fireman controller having fireman switch at fire
Landing.
• Lift Machine of Gearless PMSM of suitable kW
with Traction pulley, OSG, electromagnetic brakes,
entire assembly mounted on adequate size girders
duly fixed on LMR floor/ shaft walls complete with
main/diverter traction sheaves, suspension wire
ropes/belts of adequate size & strength.
• Other mechanical parts such as 'T' section
adequate size guiderails for car & counter weight
with brackets fasteners, counter weight frame with
necessary blocks, buffers with necessary support
arrangement, MS pit ladder etc. erected with
necessary steel work
• Minor civil work for alteration if any and erection of
door frames and accessories, erection buffers,
erection of lift machinery, adequate size core cuts if
required & scaffolding for erecting guide rails fixing
of girders for mounting lift machine etc. complete
as per specification no. LFT.
• Lift shaft available having clear size of
......mm wide x
......mm deep , ......mm Pit depth, , ………mm
Overhead.

Page 295 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
940 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1Job 1664867
08536 13.1.3 Electric Traction Passenger Lift of Makes: As per list
of recommended brands.
with
• Rated capacity :- 13 Passenger/884Kg
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs.
• Location of Lift Machine:- MRL
• Rated speed :- 1.0/1.25mps VS
• Doors type :- COPO/TOPO Doors with frame
having clear opening of 900/1000 mm wide x 2000
mm high made from SS 304 grade sheet of 1.5mm,
thick in hairline finish for car and all landing doors
with SS door architraves/ frames
• Lift car enclosure made from SS 304 grade sheet
of 1.5mm, thick with hairline finish with frame made
from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron,
with necessary false ceiling with adequate LED
lights, blower/fan for ventilation & SS chequered
plate flooring, handrails, mirror, emergency light etc.
COP with SS face plate having metallic push buttons
with Braille Code & luminous indicator around button
with FPI, scrolling UP/DN LED indicator &
with/without attendant key switch, OWD with audio-
visual alarm, VAS in Telugu & English with intercom
system with telephone instrument in Lift car, LMR &
FCC/ground floor
• Clear Car size of ......mm wide x ....mm deep x
......mm high
• LOP with SS face plate having recess/surface push
button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille
Code & luminous indicator around button with CPI,
Lift car arrival & next travel direction audio-visual
indication at all landings
• Lift controller based on microprocessor/ PLC with
VVVF Drive having closed loop control system, with
IBMS compatible having necessary port, control
panel duly wired with proper size & strength copper
wire for power & control circuit, with provision for
addition of floor /control card & allied accessories
control panel having enclosure of 1.5mm CRCA
sheet with powder coating with IP54 Protection class
Page 296 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
ARD complete with necessary SMF VRLA batteries
• Fireman controller having fireman switch at fire
Landing,
• Lift Machine of Gearless PMSM of suitable kW
with Traction pulley, OSG, electromagnetic brakes,
entire assembly mounted on adequate size girders
duly fixed on LMR floor/ shaft walls
complete with main/diverter traction sheaves,
suspension wire ropes/belts of adequate size &
strength
Other mechanical parts such as 'T' section adequate
size guide rails for car & counter weight with
brackets fasteners, counter weight frame with
necessary blocks, buffers with necessary support
arrangement, MS pit ladder etc. erected with
necessary steel work
• Minor civil work for alteration if any and erection of
door frames and accessories, erection buffers,
erection of lift machinery, adequate size core cuts if
required & scaffolding for erecting guide rails fixing
of girders for mounting lift machine etc. complete
as per specification no. LFT.
• Lift shaft available having clear size of ......mm
wide x
......mm deep, ......mm Pit depth, ………mm
Overhead
941 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1Job 1951573
08537 13.1.4 Electric Traction Passenger cum Stretcher/Hospital
Lift of Makes: As per list of recommended brands.
with
• Rated capacity :- 15 Passenger/1020Kg
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MRL
• Rated speed :- 1.0/1.25mps VS
• Doors type :- COPO/TOPO Doors with frame
having clear opening of 800/900/1000 mm wide x
2000mm high made from SS 304 grade sheet of
1.5mm, thick in hairline finish for car and all landing
doors with SS door architraves /frames
• Lift car enclosure made from SS 304 grade sheet
of 1.5mm, thick with hairline finish with frame made
from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron,
Page 297 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
with necessary false ceiling with adequate LED
lights, blower/fan for ventilation & SS chequered
plate flooring, handrails, mirror, emergency light etc.
COP with SS face plate having metallic push buttons
with Braille Code & luminous indicator around button
with FPI, scrolling UP/DN LED indicator &
with/without attendant key switch, OWD with audio-
visual alarm, VAS in Telugu & English with intercom
system with telephone instrument in Lift car, LMR &
FCC/ground floor
Clear Car size of ......mm wide x ......mm deep x
......mm high
• LOP with SS face plate having recess/surface push
button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille
Code & luminous indicator around button with CPI,
Lift car arrival & next travel direction audio-visual
indication at all landings
• Lift controller based on microprocessor/ PLC with
VVVF Drive having closed loop control system, with
IBMS compatible having necessary port, control
panel duly wired with proper size & strength copper
wire for power & control circuit, with provision
for addition of floor/ control card & allied accessories
control panel having enclosure of 1.5mm CRCA
sheet with powder coating with IP54 Protection class
ARD complete with necessary SMF VRLA batteries
• Fireman controller having fireman switch at fire
Landing,
• CCTV surveillance system comprises of 2nos
minimum 2.0MP FHD IP based vandal proof
Dome camera in lift car & in LMR/inside lift shaft
top aimed on Lift machinery & controller with NVR
kept in LMR/FCC with HDR data backup for 60 days
with 18" FHD TV monitor, to be kept in FCC/LMR as
directed by Engineer In Charge
• Lift Machine of Gearless PMSM of suitable kW
with Traction pulley, OSG, electromagnetic brakes,
entire assembly mounted on adequate size girders
duly fixed on LMR floor/ shaft walls complete with
main/diverter traction sheaves, suspension wire
ropes/belts of adequate size & strength
Other mechanical parts such as 'T' section adequate
size guide rails for car & counter weight with
Page 298 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
brackets fasteners, counter weight frame with
necessary blocks, buffers with necessary support
arrangement, MS pit ladder etc. erected with
necessary steel work
• Minor civil work for alteration if any and erection of
door frames and accessories, erection buffers,
erection of lift machinery
, adequate size core cuts if required & scaffolding for
erecting guide rails fixing of girders for mounting lift
machine etc. complete as per specification no. LFT.
• Lift shaft available having clear size of
......mm wide x
......mm deep , ......mm Pit depth, , ………mm
Overhead
942 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1Job 2327245
08538 13.1.5 Electric Traction Passenger cum Stretcher/Hospital
Lift of Makes: As per list of recommended brands.
with
• Rated capacity :- 20 Passenger/1360Kg
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MRL
• Rated speed :- 1.0/1.25mps VS
• Doors type :- COPO/TOPO Doors with frame
having clear opening of 1100/1200 mm wide x 2000
mm high made from SS 304 grade sheet of 1.5mm,
thick in hairline finish for car and all landing doors
with SS door architraves/frames
• Lift car enclosure made from SS 304 grade sheet
of 1.5mm, thick with hairline finish with frame made
from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron,
with necessary false ceiling with adequate LED
lights, blower/fan for ventilation & SS chequered
plate flooring, handrails, mirror, emergency light etc.
• COP with SS face plate having metallic push
buttons with Braille Code & luminous indicator
around button with FPI, scrolling UP/DN LED
indicator & with/without attendant key switch, OWD
with audio-visual alarm, VAS in Telugu & English
with intercom system with telephone instrument in
Lift car, LMR & FCC/ground floor
• Clear Car size of ......mm wide x ....mm deep x
......mm high
Page 299 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
LOP with SS face plate having recess/surface push
button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille
Code & luminous indicator around button with CPI,
Lift car arrival & next travel direction audio-visual
indication at all landings
• Lift controller based on microprocessor/ PLC with
VVVF Drive having closed loop control system, with
IBMS compatible having necessary port, control
panel duly wired with proper size & strength copper
wire for power & control circuit, with provision
for addition of floor/control card & allied accessories
control panel having enclosure of 1.5mm CRCA
sheet with powder coating with IP54 Protection
class
ARD complete with necessary SMF VRLA batteries
• Fireman controller having fireman switch at fire
Landing,
• CCTV surveillance system comprises of 2nos
minimum 2.0MP FHD IP based vandal proof
Dome camera in lift car & in LMR/inside lift shaft
top aimed on Lift machinery & controller with NVR
kept in LMR/FCC with HDR data backup for 60
days with 18" FHD TV monitor, to be kept in
FCC/LMR as directed by Engineer In Charge.
• Lift Machine of Gearless PMSM of suitable kW
with Traction pulley, OSG, electromagnetic brakes,
entire assembly mounted on adequate size girders
duly fixed on LMR floor/ shaft walls complete with
main/diverter traction sheaves, suspension wire
ropes/belts of adequate size & strength.
Other mechanical parts such as 'T' section adequate
size guide rails for car & counter weight with
brackets fasteners, counter weight frame with
necessary blocks, buffers with necessary support
arrangement, MS pit ladder etc. erected with
necessary steel work
• Minor civil work for alteration if any and erection of
door frames and accessories, erection buffers,
erection of lift machinery, adequate size core cuts if
required & scaffolding for erecting guide rails fixing
of girders for mounting lift machine etc. complete
as per specification no. LFT.
• Lift shaft available having clear size of ......mm
Page 300 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
wide x......mm deep, ......mm Pit depth,
………mm Overhead.
943 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1Job 2387416
08539 13.1.6 Electric Traction Passenger Lift of Makes: As per list
of recommended brands.
with
• Rated capacity :- 22 Passenger/1496Kg
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MRL
• Rated speed :- 1.0/1.25mps VS
• Doors type :- COPO/TOPO Doors with frame
having clear opening of 1100 mm wide x 2000 mm
high made from SS 304 grade sheet of 1.5mm, thick
in hairline finish for car and all landing doors with SS
door architraves/frames
• Lift car enclosure made from SS 304 grade sheet
of 1.5mm, thick with hairline finish with frame made
from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron,
with necessary false ceiling with adequate LED
lights, blower/fan for ventilation & SS chequered
plate flooring, handrails, mirror, emergency light etc.
COP with SS face plate having metallic push buttons
with Braille Code & luminous indicator around button
with FPI, scrolling UP/DN LED indicator &
with/without attendant key switch, OWD with audio-
visual alarm, VAS in Telugu & English with intercom
system with telephone instrument in Lift car, LMR &
FCC/ground floor
• Clear Car size of ......mm wide x ......mm deep x
......mm high
• LOP with SS face plate having recess/surface push
button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille
Code & luminous indicator around button with CPI,
Lift car arrival & next travel direction audio-visual
indication at all landings
Lift controller based on microprocessor/ PLC with
VVVF Drive having closed loop control system, with
IBMS compatible having necessary port, control
panel duly wired with proper size & strength copper
wire for power & control circuit, with provision for

Page 301 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
addition of floor/control card & allied accessories
control panel having enclosure of 1.5mm CRCA
sheet with powder coating with IP54 Protection class
• ARD complete with necessary SMF VRLA
batteries
• Fireman controller having fireman switch at fire
Landing,
Lift Machine of Gearless PMSM of suitable kW with
Traction pulley, OSG, electromagnetic brakes, entire
assembly mounted on adequate size girders duly
fixed on LMR floor/ shaft walls complete with
main/diverter traction sheaves, suspension wire
ropes/belts of adequate size & strength
• Other mechanical parts such as 'T' section
adequate size guide rails for car & counter weight
with brackets fasteners, counter weight frame with
necessary blocks, buffers with necessary
support arrangement, MS pit ladder etc. erected with
necessary steel work
Minor civil work for alteration if any and erection of
door frames and accessories, erection buffers,
erection of lift machinery, adequate size core cuts if
required & scaffolding for erecting guide rails fixing
of girders for mounting lift machine etc. complete
as
per specification no. LFT.
• Lift shaft available having clear size of ......mm
wide x
......mm deep, ......mm Pit depth, ………mm
Overhead.
944 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1Job 2546889
08540 13.1.7 Electric Traction Passenger cum Stretcher/Hospital
Lift of Makes: As per list of recommended brands.
with
• Rated capacity :- 26 Passenger/1768Kg
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MR
• Rated speed :- 1.0/1.25mps VS
• Doors type :- COPO/TOPO Doors with frame
having clear opening of 1100/1200 mm wide x 2000
mm high made from SS 304 grade sheet of 1.5mm,
thick in hairline finish for car and all landing doors
with SS door architraves/frames
Page 302 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
• Lift car enclosure made from SS 304 grade sheet
of 1.5mm, thick with hairline finish with frame made
from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron,
with necessary false ceiling with adequate LED
lights, blower/fan for ventilation & SS chequered
plate flooring, handrails, mirror, emergency light etc.
COP with SS face plate having metallic push buttons
with Braille Code & luminous indicator around button
with FPI, scrolling UP/DN LED indicator &
with/without attendant key switch, OWD with audio-
visual alarm, VAS in Telugu & English with intercom
system with telephone instrument in Lift car, LMR
& FCC/ground floor
• Clear Car size of ......mm wide x ......mm deep x
......mm high
•LOP with SS face plate having recess/surface push
button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille
Code & luminous indicator around button with CPI,
Lift car arrival & next travel direction audio-visual
indication at all landings
Lift controller based on microprocessor/ PLC with
VVVF Drive having closed loop control system, with
IBMS compatible having necessary port, control
panel duly wired with proper size & strength copper
wire for power & control circuit, with provision for
addition of floor/control card & allied accessories
control panel having enclosure of 1.5mm CRCA
sheet with powder coating with IP54 Protection class
• ARD complete with necessary SMF VRLA
batteries
• Fireman controller having fireman switch at
fire Landing,
• CCTV surveillance system comprises of 2nos
minimum 2.0MP FHD IP based vandal proof
Dome camera in lift car & in LMR/inside lift shaft
top aimed on Lift machinery & controller with NVR
kept in LMR/FCC with HDR data backup for 60 days
with 18" FHD TV monitor, to be kept in FCC/LMR as
directed by Engineer In Charge.
Lift Machine of Gearless PMSM of suitable kW with
Traction pulley, OSG, electromagnetic brakes, entire
assembly mounted on adequate size girders duly
Page 303 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
fixed on LMR floor/ shaft walls complete
with main/diverter traction sheaves, suspension wire
ropes/belts
of adequate size & strength
• Other mechanical parts such as 'T' section
adequate size guide rails for car & counter weight
with brackets fasteners, counter weight frame with
necessary blocks, buffers with necessary support
arrangement, MS pit ladder etc. erected with
necessary
steel work
• Minor civil work for alteration if any and erection of
door frames and accessories, erection buffers,
erection of lift machinery, adequate size core cuts if
required & scaffolding for erecting guide rails fixing
of girders for mounting lift machine etc. complete
as per specification no. LFT.
• Lift shaft available having clear size of
......mm wide x......mm deep, ......mm Pit depth,
………mm Overhead.
945 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1Job 3091754
08541 13.1.8 Electric Traction Goods Lift of Makes: As per list of
recommended brands.
with
• Rated capacity :- 3000Kg Goods/44
Passengers
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MR
• Rated speed :- 0.6 to 1.0mps VS
• Doors type :- COPO/TOPO Doors with frame
having clear opening of 1700 mm wide x 2000 mm
high made from SS 304 grade sheet of 1.5mm, thick
in hairline finish for car and all landing doors with SS
door architraves/frames
• Lift car enclosure made from SS 304 grade sheet
of 1.5mm, thick with hairline finish with frame made
from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron,
with necessary false ceiling with adequate LED
lights, blower/fan for ventilation & SS chequered
plate flooring, handrails, mirror, emergency light etc.
• COP with SS face plate having metallic push
buttons with Braille Code & luminous indicator
Page 304 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
around button with FPI, scrolling
UP/DN LED indicator & with/without attendant key
switch, OWD with audio-visual alarm, VAS in Telugu
&English with intercom system with telephone
instrument in Lift car, LMR
& FCC/ground floor
• Clear Car size of ......mm wide x ......mm deep x
......mm high
LOP with SS face plate having recess/surface push
button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille
Code & luminous indicator around button with
CPI, Lift car arrival & next travel direction audio-
visual indication at all landings
• Lift controller based on microprocessor/ PLC with
VVVF Drive having closed loop control system, with
IBMS compatible having necessary port, control
panel duly wired with proper size & strength copper
wire for power & control circuit, with provision for
addition of floor/control card & allied accessories
control panel having enclosure of 1.5mm CRCA
sheet with powder coating with IP54 Protection class
• ARD complete with necessary SMF VRLA
batteries
• Fireman controller having fireman switch at
fire Landing,
• Lift Machine of Gearless PMSM of suitable kW
with Traction pulley, OSG, electromagnetic brakes,
entire assembly mounted on adequate size girders
duly fixed on LMR floor/ shaft walls complete with
main/diverter traction sheaves, suspension wire
ropes/belts of adequate size & strength
Other mechanical parts such as 'T' section adequate
size guide rails for car & counter weight with
brackets fasteners, counter
weight frame with necessary blocks, buffers with
necessary support arrangement, MS pit ladder etc.
erected with necessary steel work
• Minor civil work for alteration if any and erection of
door frames and accessories, erection buffers,
erection of lift machinery, adequate size core cuts if
required & scaffolding for erecting guide
rails fixing of girders for mounting lift machine
etc. complete as per specification no. LFT.• Lift
Page 305 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
shaft available having clear size of ......mm wide
x......mm deep, ......mm Pit depth, ………mm
Overhead.
946 MAT- ELEC- Supply, Installation, Testing and Commissioning of 1Job 3423866
08542 13.1.9 Electric Traction Goods Lift of Makes: As per list of
recommended brands.
with
• Rated capacity :- 4000Kg Goods /59
Passengers
• Floors :- G+1 floor (2Stops/2 Landings)
• Travel :- 3 to 4.2 mtrs
• Location of Lift Machine:- MR
• Rated speed :- 0.6 to 1.0mps VS
• Doors type :- COPO/TOPO Doors with frame
having clear opening of 2100 mm wide x 2000 mm
high made from SS 304 grade sheet of 1.5mm, thick
in hairline finish for car and all landing doors with SS
door architraves/frames
• Lift car enclosure made from SS 304 grade sheet
of 1.5mm, thick with hairline finish with frame made
from MS girders, bracing of adequate size with
minimum safety factor of 5, with Toe Guard Apron,
with necessary false ceiling with adequate LED
lights, blower/fan for ventilation & SS chequered
plate flooring, handrails, mirror, emergency light etc.
• COP with SS face plate having metallic push
buttons with Braille Code & luminous indicator
around button with FPI, scrolling UP/DN LED
indicator & with/without attendant key switch, OWD
with audio-visual alarm, VAS in Telugu & English
with intercom system with telephone instrument in
Lift car, LMR & FCC/ground floor
Clear Car size of ......mm wide x ......mm deep x
......mm high
• LOP with SS face plate having recess/surface push
button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille
Code & luminous indicator around button
with CPI, Lift car arrival & next travel direction audio-
visual
indication at all landings
• Lift controller based on microprocessor/ PLC with
VVVF Drive having closed loop control system, with
IBMS compatible having necessary port, control
Page 306 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
panel duly wired with proper size & strength copper
wire for power & control circuit, with provision for
addition of floor/control card & allied accessories
control panel having enclosure of 1.5mm CRCA
sheet with powder coating with IP54 Protection class
ARD complete with necessary SMF VRLA batteries
• Fireman controller having fireman switch at
fire Landing,
• Lift Machine of Gearless PMSM of suitable kW
with Traction pulley, OSG, electromagnetic brakes,
entire assembly mounted on adequate size girders
duly fixed on LMR floor/ shaft walls complete with
main/diverter traction sheaves, suspension wire
ropes/belts of adequate size & strength.
Other mechanical parts such as 'T' section adequate
size guide rails for car & counter weight with
brackets fasteners, counter weight frame with
necessary blocks, buffers with necessary support
arrangement, MS pit ladder etc. erected with
necessary steel work
• Minor civil work for alteration if any and erection of
door frames
and accessories, erection buffers, erection of lift
machinery, adequate size core cuts if required &
scaffolding for erecting guide rails fixing of girders
for mounting lift machine etc. complete as per
specification no. LFT.
• Lift shaft available having clear size of
......mm wide x......mm deep, ......mm Pit depth,
………mm Overhead.
NOTE: 1. The above rates are applicable only for the
makes:
KONE/OTIS/SCHINDLER/MITSUBISHI/JOHNSON.
2. If the local reputed brands preferred by the
Departments or Corporations, the makes Suryodaya
Elevators/ESCO Lifts/Sunrise Lifts/ or any other
make approved by the competent authority subject
to the condition that the Specifications remains
unchanged can be adopted in the estimate by
reducing the price @15% less than the above rates.
Add On

Page 307 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
A For Lift travelling up to six floors or at a speed of 1.0
mps, add as below,
947 MAT- 1 For Lift having 700mm wide x 2000mm high clear 1Floor 160765
08543 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
948 MAT- 2 For Lift having 800mm wide x 2000mm high clear 1Floor 165625
08544 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP’s with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with trunking,
traveling cables, main hoisting ropes/belts, &
OSG rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
949 MAT- 3 For Lift having 900mm wide x 2000mm high clear 1Floor 171409
08545 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP’s with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
950 MAT- 4 For Lift having 1000mm wide x 2000mm high clear 1Floor 176577
08546 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/
belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
951 MAT- 5 For Lift having 1100mm wide x 2000mm high clear 1Floor 181868
08547 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP’s with UP/DN buttons-arrows-indicators,
Page 308 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
952 MAT- 6 For Lift having 1200mm wide x 2000mm high clear 1Floor 188143
08548 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP’s with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts, & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
953 MAT- 7 For Lift having 1300mm wide x 2000mm high clear 1Floor 193927
08549 entrance in 1.5mm thick SS 304 grade landing door
[Two/four panel], this includes all necessary
accessories like LOP's with UP/DN buttons- arrows-
indicators, extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
954 MAT- 8 For Lift having 1400mm wide x 2000mm high clear 1Floor 199833
08550 entrance in 1.5mm thick SS 304 grade landing door
[Two/four panel], this includes all necessary
accessories like LOP's with UP/DN buttons-arrows-
indicators, extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/
belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
955 MAT- 9 For Lift having 1500mm wide x 2000mm high clear 1Floor 209923
08551 entrance in 1.5mm thick SS 304 grade landing door
[Four panel], this includes all necessary accessories
like LOP’s with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts, & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete

Page 309 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
956 MAT- 10 For Lift having 1700mm wide x 2000mm high clear 1Floor 220136
08552 entrance in 1.5mm thick SS 304 grade landing door
[Four panel], this includes all necessary accessories
like LOP’s with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts, & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
957 MAT- 11 For Lift having 1800mm wide x 2000mm high clear 1Floor 231334
08553 entrance in 1.5mm thick SS 304 grade landing door
[Four panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts, & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
958 MAT- 12 For Lift having 2100mm wide x 2000mm high clear 1Floor 252006
08554 entrance in 1.5mm thick SS 304 grade landing door
[Six panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts, & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
959 MAT- 13 For Lift having 2200mm wide x 2000mm high clear 1Floor 260743
08555 entrance in 1.5mm thick SS 304 grade landing door
[Six panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts, & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
A1 For Lift travelling above six floors & up to fifteen
floors or at a speed of 1.5 mps, add as below,
960 MAT- 1 For Lift having 700mm wide x 2000mm high clear 1Floor 167963
08556 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
Page 310 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts, & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
961 MAT- 2 For Lift having 800mm wide x 2000mm high clear 1Floor 173131
08557 entrance in1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts, & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
962 MAT- 3 For Lift having 900mm wide x 2000mm high clear 1Floor 179161
08558 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with trunking,
travelling cables, main hoisting ropes/belts, & OSG
rope landing doors with all accessories etc.
necessary for the normal safe functioning of lift
installation complete
963 MAT- 4 For Lift having 1000mm wide x 2000mm high clear 1Floor 184452
08559 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
964 MAT- 5 For Lift having 1100mm wide x 2000mm high clear 1Floor 189989
08560 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete

Page 311 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
965 MAT- 6 For Lift having 1200mm wide x 2000mm high clear 1Floor 196634
08561 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
966 MAT- 7 For Lift having 1300mm wide x 2000mm high clear 1Floor 202540
08562 entrance in 1.5mm thick SS 304 grade landing
door [Two/four panel], this includes all necessary
accessories like LOP's with UP/DN buttons- arrows-
indicators, extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
967 MAT- 8 For Lift having 1400mm wide x 2000mm high clear 1Floor 208693
08563 entrance in 1.5mm thick SS 304 grade landing
door [Two/four panel], this includes all necessary
accessories like LOP's with UP/DN buttons-arrows-
indicators, extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
968 MAT- 9 For Lift having 1500mm wide x 2000mm high clear 1Floor 219152
08564 entrance in 1.5mm thick SS 304 grade landing door
[Four panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
969 MAT- 10 For Lift having 1700mm wide x 2000mm high clear 1Floor 229980
08565 entrance in 1.5mm thick SS 304 grade landing door
[Four panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting

Page 312 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
970 MAT- 11 For Lift having 1800mm wide x 2000mm high clear 1Floor 241547
08566 entrance in 1.5mm thick SS 304 grade landing door
[Four panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
971 MAT- 12 For Lift having 2100mm wide x 2000mm high clear 1Floor 263204
08567 entrance 1.5mm thick SS 304 grade landing door
[Six panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
972 MAT- 13 For Lift having 2200mm wide x 2000mm high clear 1Floor 272433
08568 entrance in 1.5mm thick SS 304 grade landing door
[Six panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting
ropes/belts, & OSG rope landing doors with all
accessories etc. necessary for the normal safe
functioning of lift installation complete
A2 For Lift travelling above fifteen floors & up to twenty
floors or at a speed of 1.75 mps, add as below,
973 MAT- 1 For Lift having 800mm wide x 2000mm high clear 1Floor 178176
08569 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.

Page 313 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
974 MAT- 2 For Lift having 900mm wide x 2000mm high clear 1Floor 184452
08570 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
975 MAT- 3 For Lift having 1000mm wide x 2000mm high clear 1Floor 189866
08571 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
976 MAT- 4 For Lift having 1100mm wide x 2000mm high clear 1Floor 195650
08572 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
977 MAT- 5 For Lift having 1200mm wide x 2000mm high clear 1Floor 202417
08573 entrance in 1.5mm thick SS 304 grade landing door
[Two panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
978 MAT- 6 For Lift having 1300mm wide x 2000mm high clear 1Floor 208570
08574 entrance in 1.5mm thick SS 304 grade landing
door [Two/four panel], this includes all necessary
accessories like LOP's with UP/DN buttons-arrows-
indicators, extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
979 MAT- 7 For Lift having 1400mm wide x 2000mm high clear 1Floor 214845
08575 entrance in 1.5mm thick SS 304 grade landing door
Page 314 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
[Two/four panel], this includes all necessary
accessories like LOP's with UP/DN buttons-arrows-
indicators, extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
980 MAT- 8 For Lift having 1500mm wide x 2000mm high clear 1Floor 225551
08576 entrance in 1.5mm thick SS 304 grade landing door
[Four panel], this includes all necessary accessories
like LOP’s with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
981 MAT- 9 For Lift having 1700mm wide x 2000mm high clear 1Floor 236871
08577 entrance in 1.5mm thick SS 304 grade landing door
[Four panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows-indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
982 MAT- 10 For Lift having 1800mm wide x 2000mm high clear 1Floor 201433
08578 entrance in 1.5mm thick SS 304 grade landing door
[Four panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
983 MAT- 11 For Lift having 2100mm wide x 2000mm high clear 1Floor 271202
08579 entrance in 1.5mm thick SS 304 grade landing door
[Six panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
extension of guide rails, shaft wiring with
trunking, travelling cables, main hoisting ropes/belts,
& OSG rope, landing doors with all accessories etc.
complete for the safe functioning of lift installation.
984 MAT- 12 For Lift having 2200mm wide x 2000mm high clear 1Floor 280308
08580 entrance in 1.5mm thick SS 304 grade landing door
[Six panel], this includes all necessary accessories
like LOP's with UP/DN buttons-arrows- indicators,
Page 315 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
extension of guide rails, shaft wiring 1.5mm thick
SS 304 grade landing door [Six panel], this includes
all necessary accessories like LOP's with UP/DN
buttons-arrows- indicators, extension of guide
rails, shaft wiring with trunking, travelling cables,
main hoisting ropes/belts, & OSG rope, landing
doors with all accessories etc. complete for the safe
functioning of lift installation.
B If there is additional automatic car door, add as
below.
985 MAT- 1 For Lift car having 700mm wide x 2000mm high 1Set 133140
08581 clear entrance having 1.5mm thick SS 304 grade
sheet car door [Two panel] complete with
required accessories like door operator
mechanism with drive, required aluminium sill,
infrared curtain & necessary wiring with interlocking
arrangement etc. complete.
986 MAT- 2 For Lift car having 800mm wide x 2000mm high 1Set 137201
08582 clear entrance having 1.5mm thick SS 304 grade
sheet car door [Two panel] complete with
required accessories like door operator
mechanism with drive, required Aluminium sill,
infrared curtain & necessary wiring with
interlocking arrangement etc. complete.
987 MAT- 3 For Lift car having 900mm wide x 2000mm high 1Set 142000
08583 clear entrance having 1.5mm thick SS 304 grade
sheet car door [Two panel] complete with
required accessories like door operator
mechanism with drive, required aluminum sill,
infrared curtain & necessary wiring with interlocking
arrangement etc. complete.
988 MAT- 4 For Lift car having 1000mm wide x 2000mm high 1Set 146676
08584 clear entrance having 1.5mm thick SS 304 grade
sheet car door [Two panel]complete with
required accessories like door operator
mechanism with drive, required aluminum sill,
infrared curtain & necessary wiring with interlocking
arrangement etc. complete.
989 MAT- 5 For Lift car having 1100mm wide x 2000mm high 1Set 151105
08585 clear entrance having 1.5mm thick SS 304 grade
sheet car door [Two panel]complete with

Page 316 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
required accessories like door operator
mechanism with drive, required aluminum sill,
infrared curtain & necessary wiring with interlocking
arrangement etc. complete
990 MAT- 6 For Lift car having 1200mm wide x 2000mm high 1Set 156520
08586 clear entrance having 1.5mm thick SS 304 grade
sheet car door [Two panel]complete with
required accessories like door operator
mechanism with drive, required aluminum sill,
infrared curtain & necessary wiring with interlocking
arrangement etc. complete.
991 MAT- 7 For Lift car having 1300mm wide x 2000mm high 1Set 161565
08587 clear entrance having 1.5mm thick SS 304 grade
sheet car door [Two/four panel] complete with
required accessories like door operator
mechanism with drive, required aluminum sill,
infrared curtain & necessary wiring with interlocking
arrangement etc. complete.
992 MAT- 8 For Lift car having 1400mm wide x 2000mm high 1Set 166364
08588 clear entrance having 1.5mm thick SS 304 grade
sheet car door [Two/four panel] complete with
required accessories like door operator
mechanism with drive, required aluminum sill,
infrared curtain & necessary wiring with interlocking
arrangement etc. complete.
993 MAT- 9 For Lift car having 1500mm wide x 2000mm high 1Set 174608
08589 clear entrance
having 1.5mm thick SS 304 grade sheet car door
[four panel] complete with required accessories like
door operator mechanism with drive, required
aluminum sill, infrared curtain & necessary wiring
with interlocking arrangement etc. complete.
994 MAT- 10 For Lift car having 1700mm wide x 2000mm high 1Set 184329
08590 clear entrance having 1.5mm thick SS 304 grade
sheet car door [four panel] complete with required
accessories like door operator mechanism with
drive, required aluminum sill, infrared curtain &
necessary wiring with interlocking arrangement etc.
complete.
995 MAT- 11 For Lift car having 1800mm wide x 2000mm high 1Set 193435
08591 clear entrance having 1.5mm thick SS 304 grade

Page 317 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
sheet car door [four panel] complete with required
accessories like door operator mechanism with
drive, required aluminum sill, infrared curtain &
necessary wiring with interlocking arrangement etc.
complete.
996 MAT- 12 For Lift car having 2100mm wide x 2000mm high 1Set 211400
08592 clear entrance having 1.5mm thick SS 304 grade
sheet car door [six panel] complete with required
accessories like door operator mechanism with
drive, required aluminum sill, infrared curtain &
necessary wiring with interlocking arrangement etc.
complete.
997 MAT- 13 For Lift car having 2200mm wide x 2000mm high 1Set 219521
08593 clear entrance having 1.5mm thick SS 304 grade
sheet car door [six panel] complete required
aluminum sill, infrared curtain & necessary wiring
interlocking arrangement etc. complete.
C For Full Collective control system, add as below.

998 MAT- 1 For Lift travelling above First floor & up to Sixth floor 1No 31661
08594
999 MAT- 2 For Lift travelling above Sixth floor & up to Fifteenth 1No 72503
08595 floor
1000 MAT- 3 For Lift travelling above Fifteenth floor & up to 1No 95102
08596 Twentieth floor

1001 MAT- D For additional 2MP Camera along with necessary 1No 15654
08597 accessories at Home Landing, add as given.

E For Group control system of number of lifts, add as

below.
1002 MAT- 1 For Duplex Lift control system 1Job 40253
08598
1003 MAT- 2 For Triplex Lift control system 1Job 60145
08599

Page 318 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1004 MAT- 3 For Quadruplex Lift control system 1Job 81095
08600
1005 MAT- F 1No 3178
08601 For vision panel having Size 100mm wide x 200mm
high covered
with fire rated laminated glass, having punched Jali
as a part of the door panel SS sheet itself.
G The above rates are for landing & car door height of
2000mm and Lift car ceiling height of 2250mm.
If the requirements for landing & car doors height
above
2000mm & Lift car height above 2250mm, add
overall Rs. ...... per
100mm rise per Lift per landing.
a For Lift car enclosure & car door per 100mm Step
rise
1006 MAT- 1 for Lift car door, having clear entrance of 1 per 52141
08602 700/800/900mm wide Landi
ng
1007 MAT- 2 for Lift car door, having clear entrance 1 per 71444
08603 1000/1100/1200/1300mm Landi
wide ng
1008 MAT- 3 for Lift car door, having clear entrance 1 per 125233
08604 1400/1500/1700mm wide Landi
ng
1009 MAT- 4 for Lift car door, having clear entrance 1 per 212802
08605 1800/2100/2200mm wide Landi
ng
b For Lift Landings per 100mm Step rise

1010 MAT- 1 for Lift Landing door having clear entrance of 1 per 13065
08606 700/800/900mm Landi
wide ng
1011 MAT- 2 for Lift Landing door, having clear entrance of 1 per 17773
08607 1000/1100/1200/1300mm wide Landi
ng
1012 MAT- 3 for Lift Landing door, having clear entrance of 1 per 28130
08608 1400/1500/1700mm Landi
Page 319 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
wide ng

1013 MAT- 4 for Lift Landing door, having clear entrance of 1 per 42137
08609 1800/2100/2200mm wide Landi
ng
Notes:

1 General: - Job includes entire procedure of

obtaining all necessary erection permissions &
"License to Work the Lift" from Electrical
Inspector(Lifts) with submission to the Engineer In
Charge.
2 Warrantee: - Job covers two years onsite warrantee
for all the
Lift parts with FCAMC as per the maintenance
schedule.
Note 1 and 2 above shall be included in item
description.

3 If the lift shaft is greater than the required size of the

lift as mentioned in relevant Indian Standard [with
Amendments up to date], the provision of extra steel
required for erecting supports of guide rails shall be
made by the department as a separate item
4 The Electric power supply of 415 volts, 3 phase 4
wire,50Hz shall be made available up to Lift
controller, and as per the provisions laid down in
relevant The Electricity Safety Regulations
2010[with Amendments up to date], Indian
Standard, relevant Rules, the separate cables for
lighting and power & shall be erected through lift
shaft only with 2nos distinct earth connections from
lift machine & controller
5 The technical specification of Lift duty motor,
control panel, brakes, guide rails, and guide shoes,
lift car frame, car, counter weight and suspension, lift
safety gear and governor, buffer, lift doors, locking
device and contacts, lift wire rope of lifts shall be as
per actual requirement of the job.

Page 320 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
6 For nonstandard lift shafts the Lift capacity shall be
selected so that all the safety clearances to be
maintained as per the provisions laid down in
relevant Indian Standard, & relevant Rules and
work shall be carried out accordingly
7 For building having height of 15 mtr or more, lift shall
meet the requirement of fireman lift as per the
statutory requirements laid in relevant Indian
Standard
8 Vision Panel shall not be provided on power
operated doors and Fireman lifts. However manually
operated vertically sliding, horizontally sliding or
swing type doors may be provided with a vision
panel if required
9 While framing estimates of lifts for handicapped
persons/ Hospital/Goods Lifts, the relevant Indian
standard shall be referred for dimensions.
10 The sizes in mm for Lift car, entrance, available lift
Shaft etc. with travel shall be mentioned in the
Detailed Estimate
11 The above rates are for mostly installed Electric
Traction Lifts, for Lift requirements with different
purposes/ specifications, the items should be got
approved from the competent authority
12 The Traffic Analysis [TA] shall be done as per the
provisions laid down in relevant Indian standards for
finalizing the capacity and number of Lifts in different
types of buildings.
13.2: LIFT REPAIR/MODERNIZATION

LIFT MACHINE
1014 MAT- ELEC- Overhauling of Gearbox by opening the gear box, 1Job 7062
08610 13.2.1 cleaning the oil path with oil adjusting the Thrust
bearing, & bush with packings etc. and refilling with
the fresh oil of requisite viscosity and sufficient
quantity, complete with re-erection as original
with necessary alignment & testing.
1015 MAT- ELEC- Providing dismantling the existing worn- 1Job 17655
08611 13.2.2 out/damaged Thrust bearing & bush with allied
accessories complete supplying &installing new
Page 321 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Thrust bearing & Bush with allied accessories
like packings etc. and refilling with the fresh gear oil
of requisite viscosity and sufficient quantity,
complete suitable up to 10 passenger lift car with re-
erection as original with necessary alignment &
testing
1016 MAT- ELEC- Providing dismantling the existing lift duty electric 1Job 3531
08612 13.2.3 motor from lift gearbox coupling to carryout
necessary repairs and re-erection the same as
original with necessary alignment & testing complete
after repairing
1017 MAT- ELEC- Providing rewinding of the electromagnetic type 1Job 5297
08613 13.2.4 brake coil suitable to operate on 110V DC supply by
superior quality enameled copper wire of require size
complete with testing
1018 MAT- ELEC- Providing and fixing new set brake liner of good 1Job 2943
08614 13.2.5 quality complete with alignment & testing with
removal of old worn-out brake liners
1019 MAT- ELEC- Providing dismantling the existing main driving 1Job
08615 13.2.6 sheave complete by hanging the lift car and 17067
providing and fixing a new main driving sheave
made from superior quality cast iron completely
finished having diameter up to 600mm suitable up to
4nos rope grooves the size for the same will be
specified in the estimate
1020 MAT- ELEC- Providing dismantling the existing main driving 1Job 21775
08616 13.2.7 sheave complete by hanging the lift car and
providing and fixing a new main driving sheave
made from superior quality cast iron completely
finished having diameter 601 to 800mm suitable up
to 4nos rope grooves .
1021 MAT- ELEC- Providing dismantling the existing diverter 1Job 12241
08617 13.2.8 sheave complete by hanging the lift car and
providing and fixing a new diverter sheave made
from superior quality cast iron completely
finished having diameter up to 250mm suitable up to
4nos rope grooves.
1022 MAT- ELEC- Providing dismantling the existing diverter 1Job 13889
08618 13.2.9 sheave complete by hanging the lift car and
providing and fixing a new diverter sheave made
from superior quality cast iron completely
Page 322 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
finished having diameter 251 to 500mm suitable up
to 4nos rope grooves.
1023 MAT- ELEC- Providing dismantling the existing OSG pulley set 1Job 12005
08619 13.2.10 (top & bottom) complete and providing and fixing
overspeed governor pulley set ( top& bottom) made
from superior quality cast iron completely finished
suitable for Lift car rated speed.
1024 MAT- ELEC- Providing dismantling the existing OSG rubber roller 1Job 471
08620 13.2.11 complete, providing and fixing new nylon roller of
superior quality.
LIFT CAR
1025 MAT- ELEC- Providing dismantling the existing lift car/counter 1Job 3413
08621 13.2.12 weight guide shoe liner and providing and fixing new
superior quality non-metallic car/counter weight
guide shoe Liner complete with re-erection,
alignment & adjustment complete with lubrication
1026 MAT- ELEC- Providing dismantling the existing unserviceable 1Job 5414
08622 13.2.13 retiring cam (Door)by supplying & erecting new one
of superior quality with necessary spare complete
with re-erection and testing etc. with copper wound
magnetic coil of 110V DC supply.
1027 MAT- ELEC- Providing dismantling the existing deteriorated lift car 1Kg 589
08623 13.2.14 flooring/floor tiles by supplying & erecting SS
chequered plate of required thickness and of
superior quality with necessary material
1028 MAT- ELEC- Providing dismantling the existing deteriorated lift car 1Job 179022
08624 13.2.15 enclosure by supplying & erecting new enclosure
made from 1.5mm thick stainless steel sheet SS304
grade of superior quality with necessary material
complete with handrail, mirror, required
thickness stainless steel chequered plate flooring
and min. 2.5mm thick GI sheet car top &stainless
steel 304grade 1.2mm thick false ceiling & required
LED light fitting & cabin fan/blower, emergency light
with necessary grill along with required accessories
suitable for 4 to 8 passenger lift car
1029 MAT- ELEC- Providing dismantling the existing deteriorated lift car 1Job 215626
08625 13.2.16 enclosure by supplying & erecting new enclosure
made from 1.5mm thick stainless steel sheet SS304
grade of superior quality with necessary material
Page 323 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
complete with handrail, mirror, required
thickness stainless steel chequered plate flooring
and min. 2.5mm thick GI sheet car top & stainless
steel 304grade 1.2mm thick false ceiling & required
LED light fitting & cabin fan/blower, emergency light
with necessary grill along with required accessories
suitable for 10 to 13 passenger lift
1030 MAT- ELEC- Providing dismantling the existing deteriorated lift car 1Job 251290
08626 13.2.17 enclosure by supplying & erecting new enclosure
made from 1.5mm thick stainless steel sheet SS304
grade of superior quality with necessary material
complete with handrail, mirror, required
thickness stainless steel chequered plate flooring
and min. 2.5mm thick GI sheet car top &stainless
steel 304grade 1.2mm thick false ceiling & required
LED light fitting & cabin fan/blower, emergency light
with necessary grill along with required accessories
suitable for 14 to 16 passenger lift car
1031 MAT- ELEC- Providing dismantling the existing deteriorated lift car 1Job 291308
08627 13.2.18 enclosure by supplying & erecting new enclosure
made from 1.5mm thick stainless steel sheet SS304
grade of superior quality with necessary material
complete with handrail, mirror, required
thickness stainless steel chequered plate flooring
and min. 2.5mm thick GI sheet car top &stainless
steel 304grade 1.2mm thick false ceiling & required
LED light fitting & cabin fan/blower, emergency light
with necessary grill along with required accessories
suitable for 18 to 23 Passenger Lift Car
1032 MAT- ELEC- Providing dismantling the existing deteriorated Lift 1Job 371814
08628 13.2.19 car enclosure by supplying & erecting new
enclosure made from 1.5mm thick stainless steel
sheet SS304 grade of superior quality with
necessary material complete with handrail, mirror,
required thickness stainless steel chequered plate
flooring and min. 2.5mm thick GI sheet car top
&stainless steel 304grade 1.2mm thick false ceiling
& required LED light fitting & cabin fan/blower,
emergency light with necessary grill along with
required accessories suitable for 26 to 36 Passenger
Lift Car

Page 324 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1033 MAT- ELEC- Supplying erecting & testing & commissioning 1No 58497
08629 13.2.20 minimum 2000mm high Infra-Red/IR curtain with
minimum 80beams, suitable to attach automatic
Lift car door complete with electronic driver suitable
to work on 230V AC supply with required wiring
& accessories complete connected to the lift
controller safety circuit. including dismantling of
existing accessories as applicable
1034 MAT- ELEC- Supplying & erecting laminated type with 1Sqft 589
08630 13.2.21 minimum 6mm thick mirror confirming to relevant
standard in the lift car complete pasting with
necessary adhesives if required and fixing with SS
frame &accessories complete, this job includes
dismantling of existing accessories as applicable
LIFT SHAFT

1035 MAT- ELEC- Providing Emergency Stop Switch as per IS 1No 824
08631 13.2.22 [push to stop & pull/rotate clockwise to open]
erected on GI box in pit/LMR /car top for
maintenance work complete with necessary wires
1036 MAT- ELEC- Supplying & erecting over travel final/Terminal 1No 2354
08632 13.2.23 limit switch complete with nylon roller for up & down
direction along with cams etc as required.
1037 MAT- ELEC- Providing and fixing new magnetic reed switch with 1No 1177
08633 13.2.24 M.S. Flag for levelling the lift. Providing and fixing
necessary magnet for the floor position indicator,
providing and fixing electronics card with digital
indicator, complete with re-erection including
dismantling of existing accessories as applicable
1038 MAT- ELEC- Supplying & erecting lift car door lock with 1No 1177
08634 13.2.25 electrical contact[spring loaded NO/NC of
5A/250V rating] complete unit with Bakelite roller
attached to bracket on car top with M.S. "T" bracket
attached to car gate complete with Testing including
dismantling of existing accessories as applicable
1039 MAT- ELEC- Supplying & erecting main suspension wire rope of 1Mt 235
08635 13.2.26 13mm dia having 8/19 construction as per IS
complete with termination in provided eye bolts
including dismantling of existing accessories as
applicable

Page 325 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1040 MAT- ELEC- Supplying & erecting main suspension wire rope of 1Mt 235
08636 13.2.27 10mm dia. having 8/19 construction as per IS
complete with termination in provided eye bolts
including dismantling of existing accessories as
applicable
1041 MAT- ELEC- Supplying & erecting main suspension wire rope 1Mt 177
08637 13.2.28 of 8mm dia .having 8/19 construction as per IS
complete with termination in provided eye bolts
including dismantling of existing accessories as
applicable
1042 MAT- ELEC- Supplying & erecting wire rope of 3/4/6mm dia. 1Mt 118
08638 13.2.29 having 6/19 construction as per IS complete with
termination in provided eye bolts including
dismantling of existing accessories as applicable
1043 MAT- ELEC- Supplying & erecting GI eye bolt suitable for tie up of 1No 1766
08639 13.2.30 min. 13mm dia. lift wire ropes with 4nos bull dog
clips 8/19 construction as per IS Complete with
termination in provided eye bolts including
dismantling of existing accessories as applicable
1044 MAT- ELEC- Supplying & erecting GI eye bolt suitable for tie up of 1No 1412
08640 13.2.31 8/10mm dia. lift wire ropes with 4nos bull dog clips
8/19 construction as per IS Complete with
termination in provided eye bolts including
dismantling of existing accessories as applicable.
CAR & LANDING DOORS:

1045 MAT- ELEC- Repairing of M.S. collapsible landing/lift car door for 1Job 1059
08641 13.2.32 broken rivets, pickets gibes, roller bearings complete
with oiling etc. complete with re-erection, and
alignment for smooth operation
1046 MAT- ELEC- Supplying & erecting MS collapsible type perforate 1Job 10593
08642 13.2.33 Car/ Landing door with 50mm high 8mm thick MS
pata at top with roller bearings & nylon gibes
complete having adequate strength as per
requirements with necessary alignment complete
with having clear opening of 700/800mm in width
and clear height not less than 2000mm including
dismantling of existing door as applicable
1047 MAT- ELEC- Supplying & erecting MS collapsible type perforate 1Job 12594
08643 13.2.34 Car/Landing door with 50mm high 8mm thick MS
Page 326 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
pata at top with roller bearings & nylon gibes
complete having adequate strength as per
requirements with necessary alignment complete
with having clear opening of 1000/1200mm in
width and clear height not less than 2000mm
including dismantling of existing door as applicable
1048 MAT- ELEC- Supplying & erecting MS Collapsible type 1Job 16478
08644 13.2.35 imperforate Car/Landing door with 50mm high 8mm
thick MS pata at top with roller bearings & Nylon
gibes complete having adequate strength as per
requirements with necessary alignment complete
with grassing Note for Imperforate door the thickness
of CRCA sheet not less than 1.mm having clear
opening of 700/800mm in width and clear height not
less than 2000mm, including dismantling of
existing door as applicable
1049 MAT- ELEC- Supplying & erecting COPO car/landing door panels 1Job 73798
08645 13.2.36 with frame made from 1.5mm thick SS 304grade
sheet complete with necessary coupler
arrangements, nylon bearings at hanger with header
assembly with all required accessories with
electromechanical lock &nylon coated guide shoes
complete having adequate strength as per
requirements with necessary alignment complete
with greasing having clear opening of 700mm in
width and clear height not less than2000mm,
including dismantling of existing door as applicable.
1050 MAT- ELEC- Supplying & erecting COPO car/landing door panels 1Job 79094
08646 13.2.37 with frame made from 1.5mm thick SS 304grade
sheet complete with necessary coupler
arrangements, nylon bearings at hanger with header
assembly with all required accessories with
electromechanical lock &nylon coated guide shoes
complete having adequate strength as per
requirements with necessary alignment complete
with greasing having clear opening of 800mm in
width and clear height not less than2000mm,
including dismantling of existing door as applicable
1051 MAT- ELEC- Supplying & erecting COPO car/landing door panels 1Job 89687
08647 13.2.38 with frame made from 1.5mm thick SS 304grade
sheet complete with necessary coupler
arrangements, nylon bearings at hanger with header

Page 327 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
assembly with all required accessories with
electromechanical lock & nylon coated guide shoes
complete having adequate strength as per
requirements with necessary alignment complete
with greasing having clear opening of 900mm in
width and clear height not less than2000mm,
including dismantling of existing door as applicable
1052 MAT- ELEC- Supplying & erecting COPO car/landing door panels 1Job 102164
08648 13.2.39 with frame made from 1.5mm thick SS 304grade
sheet complete with necessary coupler
arrangements, nylon bearings at hanger with header
assembly with all required accessories with
electromechanical lock &nylon coated guide shoes
complete having adequate strength as per
requirements with necessary alignment complete
with greasing having clear opening of 1000mm in
width and clear height not less than 2000mm,
including dismantling of existing door as applicable
1053 MAT- ELEC- Supplying & erecting COPO car/landing door panels 1Job 116523
08649 13.2.40 with frame made from 1.5mm thick SS 304grade
sheet complete with necessary coupler
arrangements, nylon bearings at hanger with header
assembly with all required accessories with
electromechanical lock & nylon coated guide shoes
complete having adequate strength as per
requirements with necessary alignment complete
with greasing having clear opening of 1200mm in
width and clear height not less than 2000mm,
including dismantling of existing door as applicable
1054 MAT- ELEC- Providing & fixing aluminum sill with 1 track suitable 1Mt 1236
08650 13.2.41 for fixing of car/ landing door with necessary material
like MS brackets, fasteners complete with alignment,
including dismantling of existing door as applicable
1055 MAT- ELEC- Providing & fixing aluminum Sill with 2 track suitable 1Mt 1648
08651 13.2.42 for fixing of car/ landing door with necessary material
like MS brackets, fasteners complete with alignment,
including dismantling of existing door as applicable
1056 MAT- ELEC- Providing & fixing landing door gate lock of superior 1No 4708
08652 13.2.43 quality with necessary adjustable operating lever
complies with the relevant IS suitable for swing or
collapsible type landing doors

Page 328 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1057 MAT- ELEC- Providing & fixing landing/Car gate movable contact 1No 177
08653 13.2.44 electrical switch of superior quality complies with the
relevant IS suitable for all type of landing/car doors
1058 MAT- ELEC- Providing & fixing LOP with single push button with 1No 5179
08654 13.2.45 metallic top& Braille Coded suitable for UP/DN
having luminous glow indicator around button with
MS box & 3mm thick SS face plate with screws with
UP & DN button & digital CPI (suitable for 1digits)
complete with necessary connections, including
dismantling of existing door as applicable
1059 MAT- ELEC- Providing & fixing LOP with two push button with 1No 6238
08655 13.2.46 metallic top & Braille coded suitable for UP/DN
having luminous glow indicator around button with
MS box & 3mm thick SS face plate with screws with
UP & DN button & digital CPI (suitable for 2digits)
complete with necessary connections, including
dismantling of existing door as applicable
1060 MAT- ELEC- Providing & fixing COP with push buttons having 1No 19185
08656 13.2.47 luminous glow indicator around button suitable for
G+7 floors with push buttons with metallic top &
Braille coded suitable for door close, door open,
alarm bell, stop, light, fan, intercom etc, FPI, with
MS box & 3mm thick SS face Plate with UP & DN
arrows & digital FPI (suitable for 2digits) complete
with necessary connections, including dismantling of
existing COP as applicable
1061 MAT- ELEC- Providing & fixing push button suitable with micro 1No 1118
08657 13.2.48 switch with push button on existing COP/LOP with
necessary connections and testing complete
including dismantling of existing button accessories
as applicable
1062 MAT- ELEC- Providing & fixing 40mm high fixing digital indicator 1No 1412
08658 13.2.49 module of gives indication of required shade with
connections and testing complete including
dismantling of existing accessories as applicable
1063 MAT- ELEC- Providing & fixing car door operator motor with 1No 28248
08659 13.2.50 assembly of suitable capacity & speed with
necessary pulleys & required accessories
complete including dismantling of existing
accessories as applicable

Page 329 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1064 MAT- ELEC- Providing & fixing hydraulic type landing door closer 1No 1471
08660 13.2.51 suitable for swing door with necessary material
complete, including dismantling of existing
accessories as applicable
1065 MAT- ELEC- Providing & fixing car/landing door guide shoe 1 door 706
08661 13.2.52 liner/ gibes complete with necessary material
like nylon coating complete including dismantling
of existing accessories as applicable
CONTROLLER
1066 MAT- ELEC- Supplying erecting, testing & commissioning 1Job 123350
08662 13.2.53 of electronic microprocessor/ PLC based
collective-selective lift controller with closed loop
logic suitable up to 5.5kW capacity lift duty
motor without VVVF Drive and lift car travelling
Gr+7 floors having manual operated doors
complete erected on wall or floor made from 1.5mm
thick CRCA sheet with powder coated enclosure
having IP54 protection grade, including dismantling
of existing accessories as applicable.
1067 MAT- ELEC- Supplying erecting, testing & commissioning of 1Job 146772
08663 13.2.54 electronic microprocessor/PLC based collective-
selective lift controller with closed loop logic
suitable up to 5.5kW capacity lift duty motor
without VVVF Drive & lift car travelling Gr+7
floors having power operated doors complete
erected on wall or floor made from 1.5mm thick
CRCA sheet with powder coated enclosure having
IP54 protection grade. including dismantling of
existing accessories as applicable
1068 MAT- ELEC- Supplying erecting, testing & commissioning of 1Job 71679
08664 13.2.55 VVVF drive having provision for closed loop logic
with necessary card, suitable to drive lift duty electric
motor up to 5.5kW capacity to be erected in
position with necessary wiring in existing control
panel including dismantling of existing accessories
as applicable
1069 MAT- ELEC- Supplying erecting, testing & commissioning of 1Job 83979
08665 13.2.56 VVVF drive having provision for closed loop logic
with necessary card, suitable to drive lift duty electric
motor up to 7.5kW capacity to be erected in
position with necessary wiring in existing control
Page 330 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
panel including dismantling of existing accessories
as applicable
1070 MAT- ELEC- Supplying erecting, testing & commissioning of 1Job 107342
08666 13.2.57 VVVF drive having provision for closed loop logic
with necessary card, suitable to drive lift duty electric
motor up to 10/11kW capacity to be erected in
position with necessary wiring in existing control
panel including dismantling of existing accessories
as applicable
1071 MAT- ELEC- Supplying erecting, testing & commissioning of 1Job 135708
08667 13.2.58 VVVF drive having provision for closed loop logic
with necessary card, suitable to drive lift duty electric
motor up to 15kW capacity to be erected in position
with necessary wiring in existing control panel
including dismantling of existing accessories as
applicable
1072 MAT- ELEC- Supplying erecting, testing & commissioning of 1Job 28130
08668 13.2.59 VVVF drive having provision for closed loop logic
suitable to drive lift door operator motor up to
0.5/0.75kW capacity to be erected in position with
necessary wiring in existing control panel including
dismantling of existing accessories as applicable
1073 MAT- ELEC- Supplying erecting, testing & commissioning of 1Job 26129
08669 13.2.60 rotary encoder mounted on the lift motor shaft for
correct & control the positioning & direction of the lift
car & providing closed loop feedback to the lift
controller complete with necessary shielded data
cable up to controller with necessary connectors, this
job includes dismantling of existing encoder if any.
1074 MAT- ELEC- Providing & fixing inspection/maintenance box 1Job 1766
08670 13.2.61 with cover of suitable size with UP/DN push buttons
(with mechanical protection),stop button as per IS,
mechanically protected, toggle switch for
normal/inspection/maintenance mode, 6A/250V 3Pin
socket & 6A piano type switch protected cover with
bulb & switch having IP54 grade protection class,
this job includes dismantling of existing
Inspection/maintenance box if any.
1075 MAT- ELEC- Providing & fixing junction box having size of 1Job 1295
08671 13.2.62 300x300mm & height of 80mm complete with
Bakelite terminal strip of 16A/500V rating with cover

Page 331 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
having IP54 grade protection class includes
dismantling of existing Junction box if any. This job
includes dismantling of existing
inspection/maintenance box if any.
1076 MAT- ELEC- Supplying erecting, testing & commissioning of ARD 1Job 92512
08672 13.2.63 panel having audio-visual indication in lift car
complete with necessary SMF VRLA batteries
suitable for up to 8 passenger capacity lift car
including dismantling of existing accessories as
applicable
1077 MAT- ELEC- Supplying erecting, testing & commissioning of ARD 1Job 104871
08673 13.2.64 panel having audio-visual indication in lift car
complete with necessary SMF VRLA batteries
suitable for 9 to 12 passenger capacity lift car.
Including dismantling of existing accessories as
applicable
1078 MAT- ELEC- Supplying erecting, testing & commissioning of ARD 1Job 119819
08674 13.2.65 panel having audio-visual indication in lift car
complete with necessary SMF VRLA batteries
suitable for 13 to 16 passenger capacity lift car.
Including dismantling of existing accessories as
applicable
1079 MAT- ELEC- Supplying erecting, testing & commissioning of ARD 1Job 136532
08675 13.2.66 panel having audio-visual indication in lift car
complete with necessary SMF VRLA batteries
suitable for 17 to 22 passenger capacity lift car.
Including dismantling of existing accessories as
applicable
1080 MAT- ELEC- Supplying erecting, testing & commissioning of ARD 1Job 156894
08676 13.2.67 panel having audio-visual indication in lift car
complete with necessary SMF VRLA batteries
suitable for 23 to 29 passenger capacity lift car.
Including dismantling of existing accessories as
applicable
1081 MAT- ELEC- Providing complete lift shaft wiring in copper 1Job 23540
08677 13.2.68 wire/cable from main controller to car top with COP
& to all landing push button panel to all landing gate
locks to all floor levelling switch to main motor to
brake unit & final limit switch indicator system using
ISI mark single pvc insulated flexible copper wire
having minimum1.0 sq. mm size from controller to

Page 332 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
safety devices & 0.75Sq mm size for indication
system complete in PVC/GI trunking with cover for
lift with manually/power operated doors travelling up
to G+1floors /2stops& 2landings for floor height
up to 4.2mtrs including dismantling of existing
accessories as applicable
1082 MAT- ELEC- Supplying, erecting & terminating flat flexible PVC 1Mt 177
08678 13.2.69 insulated cable 4core 1.0 sq. mm copper
conductor used for railing cables complete erected
with PVC/wooden fastening arrangement & lugs, on
wall / trunking as per specification including
dismantling of existing accessories as applicable
1083 MAT- ELEC- Supplying, erecting & terminating flat flexible PVC 1Mt 471
08679 13.2.70 insulated cable 12core 1.0 sq. mm copper
conductor used for trailing cables complete
erected with pvc/wooden fastening arrangement &
lugs, on wall/ trunking as per specification
including dismantling of existing accessories as
applicable
1084 MAT- ELEC- Supplying, erecting, testing & commissioning 1Job 75093
08680 13.2.71 programmable rope mounted Overload Warning
Device (OWD) within built digital indicator complete
with required wiring & accessories with audio visual
indication in lift car including dismantling of existing
accessories as applicable.
Note: 1.For item no 13-2-2....for 11 to 20 passenger
capacity lift, add 15% to the basic cost

2.For item no 13-2-2....for 21 to 29 passenger

capacity lift, add 25% to the basic cost

3.For item nos. 13-2-6 to 13-2-9 main/diverter

sheave for additional groove exceeding 4nos, add
10% in the basic cost per additional groove
4.For item no's 13-2-33 to 13-2-35 for Stainless Steel
Collapsible doors, basic cost of MS collapsible
shall be doubled, Note:- This item shall be
operated with prior permission in writing from the
concern Superintending Engineer (Electrical).
5.For item no's 13-2-33 to 13-2-35, If the
requirements for landing/car doors clear height
above 2000mm , for Manual operated MS door
Page 333 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
panels add Rs.1,000/- per 100mm rise per landing.

6. For item nos. 13-2-36 to 13-2-40 the rates are

for automatic
landing/car door with clear height of 2000mm
If the Requirements for landing/car doors clear
height above
2000mm, refer add on item no. 13-1/G (b)
7.For item no 13-2-47- Providing & fixing
additional Floor button with allied hardware
components on COP, add Rs.
2500/- per additional button.
8.For item no 13-2-53 & 13-2-54... Lift Controller for
Lift car travelling 9 stops to 15 stops, add Rs.
27300/-.
9.For item no 13-2-53 & 13-2-54... Lift Controller for
Lift car travelling 16 stops to 21 stops, Rs. 46000/-.

10.For item no 13-2-53 & 13-2-54....Lift

Controller for Power Circuit suitable for above
5.5kW & up to 10kW motor, add Rs.7500/-.
11.For item no 13-2-53 & 13-2-54... Lift Controller
for Power Circuit suitable for above 10kW & up to
15kW motor, add Rs.10900/-
12.For item no 13-2-68 ... For Lift Shaft Wiring in
copper wire/cable, above 1st floor for lifts with
manually/power operated doors, add Rs. 2500/- per
floor.
13.The cost of dismantled material of lift parts, shall
be calculated on the rate analysis based on weight
density calculations of actual dismantled material
e.g. mild steel/MS/GI/SS sheets, motors, copper
wire, wooden parts etc.
14.The lift dismantled retrieved material will be
handed over to agency and the calculated amount
will be deducted in the bill.

13.3: DISMANTLING
Page 334 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1085 MAT- ELEC- Dismantling the existing 4 to 7 Passenger lift of all 1Job 35310
08681 13.3.1 types travelling G+1 floors (2 Landings/2Stops)
having with auto/manual operated doors for lift car
& all landings with door frames, guide rails,
controller, wiring buffers, Lift Machine, ropes
complete with all allied accessories of Lift and
making the site clear in all respect complete with
refilling the holes with cement mortar & making the
site as original this job includes transportation of the
dismantled material upto division/section store
and handing over to the section engineer/store
keeper in charge complete.

1086 MAT- ELEC- Dismantling the existing 8 to 12 Passenger lift of all 1Job 41195
08682 13.3.2 types travelling G+1 floors (2 Landings/2Stops)
having with auto/manual operated doors for lift car
& all landings with door frames, guide rails,
controller, wiring buffers, Lift Machine, ropes
complete with all allied accessories of Lift and
making the site clear in all respect complete with
refilling the holes with cement mortar & making the
site as original this job includes transportation of the
dismantled material upto division/section store
and handing over to the section engineer/store
keeper in charge complete.
1087 MAT- ELEC- Dismantling the existing 13 to 17 1Job 47080
08683 13.3.3 passenger/Stretcher/Goods lift of all types travelling
G+1 floors (2 Landings/2Stops) having with
auto/manual operated doors for lift car & all landings
with door frames, guide rails, controller, wiring
buffers, Lift Machine, ropes complete with all allied
accessories of Lift and making the site clear in all
respect complete with refilling the holes with
cement mortar & making the site as original this job
includes transportation of the dismantled material up
to division/section store and handing over to the
section engineer/store keeper in charge complete
1088 MAT- ELEC- Dismantling the existing 18 to 22 1Job 49434
08684 13.3.4 Passenger/Stretcher/Goods lift of all types travelling
G+1 floors (2 Landings/2Stops) having with
auto/manual operated doors for lift car & all landings
with door frames, guide rails, controller, wiring
Page 335 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
buffers, Lift Machine, ropes complete with all allied
accessories of Lift and making the site clear in all
respect complete with refilling the holes with
cement mortar & making the site as original this job
includes transportation of the dismantled material up
to division/section store and handing over to the
section engineer/store keeper in charge complete
1089 MAT- ELEC- Dismantling the existing 23 to 26 1Job 56496
08685 13.3.5 Passenger/Stretcher/Goods lift of all types travelling
G+1 floors (2 Landings/2Stops) having with
auto/manual operated doors for lift car & all landings
with door frames, guide rails, controller, wiring
buffers, Lift Machine, ropes complete with all allied
accessories of Lift and making the site clear in all
respect complete with refilling the holes with
cement mortar & making the site as original this job
includes transportation of the dismantled material up
to division/section store and handing over to the
section engineer/store keeper in charge complete
1090 MAT- ELEC- Dismantling the existing 27 to 36 1Job 61204
08686 13.3.6 Passenger/Stretcher/Goods lift of all types travelling
G+1 floors (2 Landings/2Stops) having with
auto/manual operated doors for lift car & all landings
with door frames, guide rails, controller, wiring
buffers, Lift Machine, ropes complete with all allied
accessories of Lift and making the site clear in all
respect complete with refilling the holes with
cement mortar & making the site as original this job
includes transportation of the dismantled material up
to division/section store and handing over to the
section engineer/store keeper in charge complete
1091 MAT- ELEC- Dismantling the 3000 to 5000KG Goods lift of all 1Job 63558
08687 13.3.7 types travelling G+1Upper Floors (2
Landings/2Stops) having with auto/manual
operated doors for lift car & all landings with door
frames, guide rails, controller, wiring buffers, Lift
Machine, ropes complete with all allied accessories
of Lift and making the site clear in all respect
complete with refilling the holes with cement mortar
& making the site as original this job includes
transportation of the dismantled material up to
division/section store and handing over to the
section engineer/store keeper in charge complete
Page 336 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Add On

A If there are addition of floors for lift travelling up

to six floors, add as given below

MAT- 1 For 4 to 7 passenger lift of all types 1Floor 2943

08688

MAT- 2 For 8 to 12 passenger lift of all types 1Floor 3178

08689

MAT- 3 For 13 to 17 passenger/stretcher/goods lift of all 1Floor 3413

08690 types

MAT- 4 For 18 to 23 passenger/stretcher/goods lift of all 1Floor 3884

08691 types

MAT- 5 For 23 to 26 passenger/stretcher/goods lift of all 1Floor 4002

08692 types

MAT- 6 For 27 to 36 passenger/stretcher/goods lift of all 1Floor 4237

08693 types

MAT- 7 For 3000 to 5000Kg goods lift of all types 1Floor 4590
08694

A1 If there are additional floors for Lift travelling

above Six floors and up to Fifteen floors Add as
given below
MAT- 1 For 4 to 7 passenger lift of all types 1Floor 3178
08695

MAT- 2 For 8 to 12 passenger lift of all types 1Floor 3413

08696

MAT- 3 For 13 to 17 passenger/stretcher/goods lift of all 1Floor 3884

08697 types

MAT- 4 For 18 to 23 passenger/stretcher/goods lift of all 1Floor 4002

08698 types

MAT- 5 For 23 to 26 passenger/stretcher/goods lift of all 1Floor 4237

08699 types

Page 337 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- 6 For 27 to 36 passenger/stretcher/goods lift of all 1Floor 4590
08700 types

MAT- 7 For 3000 to 5000Kg goods lift of all types 1Floor 4826
08701

A2 If there are additional floors for Lift travelling

above fifteen floors and up to Twenty floors ,
add as given below
MAT- 1 For 4 to 7 passenger lift of all types 1Floor 3413
08702

MAT- 2 For 8 to 12 passenger lift of all types 1Floor 3884

08703

MAT- 3 For 13 to 17 passenger/stretcher/goods lift of all 1Floor 4002

08704 types

MAT- 4 For 18 to 23 passenger/stretcher/goods lift of all 1Floor 4237

08705 types

MAT- 5 For 23 to 26 passenger/stretcher/goods lift of all 1Floor 4590

08706 types

MAT- 6 For 27 to 36 passenger/stretcher/goods lift of all 1Floor 4826

08707 types

MAT- 7 For 3000 to 5000Kg goods lift of all types 1Floor 5297
08708

B If there are additional set of lift car door and

landing door, add

as given below

MAT- 1 For 4 to 7 passenger lift of all types 1Set 2119

08709

MAT- 2 For 8 to 12 passenger lift of all types 1Set 2354

08710

MAT- 3 For 13 to 17 passenger/stretcher/goods lift of all 1Set 2472

08711 types

Page 338 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MAT- 4 For 18 to 23 passenger/stretcher/goods lift of all 1Set 2825
08712 types

MAT- 5 For 23 to 26 passenger/stretcher/goods lift of all 1Set 2472

08713 types

MAT- 6 For 27 to 36 passenger/stretcher/goods lift of all 1Set 2943

08714 types

MAT- 7 For 3000 to 5000Kg goods lift of all types 1Set 3531
08715

MEDICAL GAS PIPELINE SYSTEM

1092 ELEC- Supply and Fixing of 2 x 20 Oxygen Main Manifold Set 258750
14.1.1 with 19 mm O.D x12 mm ID Copper Pipe mounted
on Top Frame, Middle Frame and Bottom Frame,
along with brass blocks, NRVs/Cylinder Valves and
Pigtail Pipes of 1 mtr long of size 8 mm O.D x 3 mm
I.D, duly tested at 250 Kg/Cm2 pressure, with
Automatic Control Panel including cost and
conveyance of all material, taxes,transportation
charges and labour charges errection and
commissioning charges etc.complete for finished
item of work Makes: As per list of recommended
brands.
1093 ELEC- Supply and Fixing of 2 x 4 Oxygen Emergency Set 85000
14.1.2 Manifold with 19 mm O.D x12 mm ID Copper Pipe
mounted on Top Frame, Middle Frame and Bottom
Frame, along with brass blocks, NRVs/Cylinder
Valves and Pigtail Pipes of 1 mtr long of size 8 mm
O.D x 3 mm I.D,duly tested at 250 Kg/Cm2 pressure
and manifold fixed with High Pressure Valve System
fixed on the Manifold both the Sides. Makes: As per
list of recommended brands.
1094 ELEC- Supply and Fixing of 2 x 4 Main Nitrous Oxide Set 85000
14.1.3 Manifold with 19 mm O.D x12 mm ID Copper Pipe
mounted on Top Frame, Middle Frame and Bottom
Frame, along with brass blocks, NRVs/Cylinder
Valves and Pigtail Pipes of 1 mtr long of size 8 mm
Page 339 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
O.D x 3 mm I.D,duly tested at 250 Kg/Cm2 pressure.
& Semi Automatic Control Panel for Nitrous Oxide.
Makes: As per list of recommended brands.
1095 ELEC- Supply and Fixing of 2 x 2 Nitrous Oxide Emergency Set 27600
14.1.4 Manifold with Heavy Duty with 19 mm O.D x12 mm
ID Copper Pipe mounted on Top Frame, Middle
Frame and Bottom Frame, along with brass blocks,
NRVs/Cylinder Valves and Pigtail Pipes of 1 mtr long
of size 8 mm O.D x 3 mm I.D,duly tested at 250
Kg/Cm2 pressure with Regulator kit and 1 no.
service point, including cost and conveyance of all
materials, taxes, transportation charges and labour
charges errection and commissioning charges etc.
complete for finished item of work.Makes: As per list
of recommended brands.
1096 ELEC- Supply and Fixing of 15 V x 10 Model Ingersoll Set 1055700
14.1.5 Rand model Twin Vacuum pump system with 2000
Ltrs Capacity Vacuum Receiver, 10 HP Motors,
Starters, Filters, Vacuum Switches and other
standard accessories, Twin System. Makes: As per
list of recommended brands.

1097 ELEC- Supply and Fixing of Aneste Iwata Make TFS 150 Set 1140000
14.1.6 C9 Model, Compresso Two stage, Motor 15 HP &
57.18 CFM, 60 CFM Air Dryer with2000 Ltrs
Receiver Twin System. Makes: As per list of
recommended brands.
1098 ELEC- Supply and fixing of ……mm thick copper pipe thick for distribution, pipes
14.1.7 shall be half drawn, tempered, seamless, phosphorous deoxidized, non
arsenic and decreased confirming to BS 2871-1971 Part-1 (Table-X) and
the chemical compositions shall be as per BS 6017 of 1981 table-2 with
Lloyd Test Certification, including cost and conveyance of pipes, cost of
necessary specials made of copper and suitable for a steam working
pressure of 17 bar and should confirm to BS 864 with specially made for
brazed socket type connections, including taxes, transportation charges
including laying and jointing, testing, commissioning and all other labour
charges etc. complete for finished item of work. Makes: As per list of
recommended brands.
a 12mm O.D x 0.7 mm Rmt 331
b 15mm O.D x0.9mm Rmt 529

Page 340 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
c 22mm O.D x0.9mm Rmt 728
d 28mm O.D x0.9mm Rmt 873
e 42mm O.Dx1.2mm Rmt 2128
f 54mm O.Dx1.5mm Rmt 3117
1099 ELEC- Supply and fixing of…… Isolation Valves with necessary brass end
14.1.8 fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vacuum,
Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated
of standard make of valves including cost and conveyance of all
materials, taxes, transportation charges, fixing charges and testing
charges and all labour charges etc. complete for finished item of work.
Makes: As per list of recommended brands.
a 15 mm Valves (1/2") Each 1150
b 22 mm Valves (3/4") Each 633
c 28 mm Valves (1") Each 759
d 42 mm Valves (1") Each 2128
e 54 mm Valves (2") Each 3117
1100 ELEC- Deleted Each Deleted
14.1.9
1101 ELEC- Supply and fixing of ……..consisting of all necessary accessories ie
14.1.10 pressure sensors, regulators, pressure SWGs etc. complete including
cost and conveyance of all materials, taxes, transportation charges etc.
complete for finished item of work. Makes: As per list of recommended
brands.
a 3 Gas Digital Alarm Panel Each 28000
b 4 Gas Digital Alarm Panel Each 28750
1102 ELEC- Supply and Fixing of Oxygen Flow meters with Each 1400
14.1.11 Humidifier Bottles. Makes: As per list of
recommended brands
1103 ELEC- Supply and Fixing of Ward Vacuum Units with 600 Each 1725
14.1.12 ml Jar. Makes: As per list of recommended brands.
1104 ELEC- Deleted Each Deleted
14.1.13
1105 ELEC- Deleted Each Deleted

Page 341 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
14.1.14
1106 ELEC- Deleted Each Deleted
14.1.15
1107 ELEC- Deleted Each Deleted
14.1.16
1108 ELEC- Deleted Each Deleted
14.1.17
1109 ELEC- Supply and Fixing of Vacuum Tube. Makes: As per Rmt 45
14.1.18 list of recommended brands.
1110 ELEC- Supply and Fixing of HP ( High pressure ) Tube. Rmt 52
14.1.19 Makes: As per list of recommended brands.
1111 ELEC- Deleted Each Deleted
14.1.20
1112 ELEC- Deleted Each Deleted
14.1.21
STP & ETP WORKS (ELECTRO-
MECHANICAL ITEMS)
1113 ELEC- Supply and fixing, testing and commissioning of Each 36000
14.2.1 Manual Coarse Bar
Screen Size: To Suit 400mm Wide x 200mmLiquid
Height
Clear Opening of Screen: 25mm Size of Flat: 50mm
x 6mm
Angle of Inclination: 60 Degree
Shape of Screen: Curved Top
Accessories: Rake & 2 Nos. Side Plate
MOC: SS 304
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1114 ELEC- Supply and fixing, testing and commissioning of Each 40000
14.2.2 Manual Coarse Bar Screen Size: To Suit 600mm
Wide x 200mm Liquid Height
Clear Opening of Screen: 25mm
Size of Flat: 50mm x 6mm
Angle of Inclination: 60 Degree
Shape of Screen: Curved Top
Accessories: Rake & 2 Nos. Side Plate

Page 342 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MOC: SS 304
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1115 ELEC- Supply and fixing, testing and commissioning of Each 44000
14.2.3 Manual Fine Bar Screen
Size: To Suit 300mm Wide x 200mm Liquid Height
Clear Opening of Screen: 10mm
Size of Flat: 50mm x 6mm
Angle of Inclination: 45 Degree
Shape of Screen: Curved Top
Accessories: Rake
MOC: SS 304
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1116 ELEC- Supply and fixing, testing and commissioning of Each 40000
14.2.4 Manual Fine Bar Screen
Size: To Suit 500mm Wide x 200mm Liquid Height
Clear Opening of Screen: 10mm
Size of Flat: 50mm x 6mm
Angle of Inclination: 45 Degree
Shape of Screen: Curved Top
Accessories: Rake
MOC: SS 304
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1117 ELEC- Supply and fixing, testing and commissioning of Each 130000
14.2.5 Mechanical Fine Bar Screen
Size: To Suit 500mm Wide x 200mm Liquid Height
(700mm Total Height)
Clear Opening of Screen: 6mm
Size of Flat: 50mm x 3mm
Angle of Inclination: 75 Degree
Type of Screen: Fixed Bar, Mechanically Raked
Screen
Accessories: Discharge Chute
MOC of All Wetted Parts : SS 304
including all incidental and operational charges etc,
Page 343 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1118 ELEC- Supply and fixing, testing and commissioning of Each 85000
14.2.6 Slotted Pipe Oil Skimmer
Size: To Suit 750mm Wide Oil & Grease Trap
Size of Slotted Pipe: 200mm Dia
Type of Operation: Manual Hand Wheel
MOC of All Wetted Parts : SS 304
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1119 ELEC- Supply and fixing, testing and commissioning of Each 85000
14.2.7 Slotted Pipe Oil Skimmer
Size: To Suit 750mm Wide Oil & Grease Trap
Size of Slotted Pipe: 200mm Dia
Type of Operation: Manual Hand Wheel
MOC of All Wetted Parts : SS 304
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1120 ELEC- Supply and fixing, testing and commissioning of Each 130000
14.2.8 Slotted Pipe Oil Skimmer
Size: To Suit 2000mm Wide Oil & Grease Trap
Size of Slotted Pipe: 200mm Dia
Type of Operation: Manual Hand Wheel
MOC of All Wetted Parts : SS 304
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1121 ELEC- Supply and fixing, testing and commissioning of Each 75000
14.2.9 Equalisation Tank Blower
Capacity of Blower: 50m3/Hr @ 5.5 MWC
Type of Blower: Twin Lobe
MOC of Blower: CI
Speed of Blower : Less than 1000 RPM
Speed of Blower Motor: 1440 RPM
The Blower shall be complete with Blower & Motor
mounted on a common base frame, belt drive, belt

Page 344 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
guard, Suction & Discharge Silencer, Air Filter,
Safety Valve, NRV, etc., complete.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1122 ELEC- Supply and fixing, testing and commissioning of Each 170000
14.2.10 Equalisation Tank Blower
Capacity of Blower: 180m3/Hr @ 5.5 MWC
Type of Blower: Twin Lobe
MOC of Blower: CI
Speed of Blower : Less than 1000 RPM
Speed of Blower Motor: 1440 RPM
The Blower shall be complete with Blower & Motor
mounted on a common base frame, belt drive, belt
guard, Suction & Discharge Silencer, Air Filter,
Safety Valve, NRV, etc., complete.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1123 ELEC- PH METER :- supply and Fixing of PH meter PO 650 Each 19000
14.2.11 ph/ orp with push button type for physical
dimensions 105x105x130mm cut out size 92x92mm
enclosure ABS weather proof IP-65 calibration /set
point ,Sensor dimension 140mmx32mm ,Flow throw
. It including cost and conveyance , all taxes
specification Provided at the outlet of Sewerage
treated water sump it including all taxes as directed
by Engineer-in-charge . Makes: As per list of
recommended brands.
1124 ELEC- Supply and fixing, testing and commissioning of Each 750
14.2.12 Coarse Bubble Diffusers
Type: Disc Diffuser
Size: 80mm Dia
MOC: EPDM
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1125 ELEC- Supply and fixing, testing and commissioning of Fine Each 2000
14.2.13 Bubble Diffusers

Page 345 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Type: Tubular
Size: 1.0m Long x 90 Dia
MOC: EPDM
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1126 ELEC- Supply and fixing, testing and commissioning of Each 57000
14.2.14 Equivalisation Effluent/ Sewage Pump
Capacity of Pump: 4.00 Cu.m/Hr @ 6m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 10mm
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Accessories: Auto Coupling, SS304 Lifting Chain,
SS Guide Pipe, Control Panel with Level Switches
for auto Start & Stop
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1127 ELEC- Supply and fixing, testing and commissioning of Each 70132
14.2.15 Equalisation Effluent/Sewage Pump
Capacity of Pump: 15 Cu.m/Hr @ 6m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 80mm
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Accessories: Auto Coupling, SS304 Lifting Chain,
SS Guide Pipe, Control Panel with Level Switches
for auto Start & Stop
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1128 ELEC- Supply and fixing, testing and commissioning of Each 85000
14.2.16 Equalisation Effluent/ Sewage Pump
Capacity of Pump: 25 Cu.m/Hr @ 6m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 80mm
Impeller Type: Non Clog
Page 346 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
MOC of Casing: CI
MOC of Impeller: CI
Accessories: Auto Coupling, SS304 Lifting Chain,
SS Guide Pipe, Control Panel with Level Switches
for auto Start & Stop
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1129 ELEC- Supply and fixing, testing and commissioning of Each 100000
14.2.17 Equalisation Effluent/ Sewage Pump
Capacity of Pump: 32.5 Cu.m/Hr @ 6m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 40mm
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Accessories: Auto Coupling, SS304 Lifting Chain,
SS Guide Pipe, Control Panel with Level Switches
for auto Start & Stop
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1130 ELEC- Supply and fixing, testing and commissioning of Nos 75000
14.2.18 Mixer for Anoxic Tank
Type: Turbine Type
RPM of Mixer: 50
MOC of Shaft & Blades: SS 304
Motor KW: 1.1
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1131 ELEC- Supply and fixing, testing and commissioning of Each 95000
14.2.19 Mixer for Anoxic Tank
Size: To Suit 2.275 x 2.0 x 4.5m LD (5.0m TD)
Type: Turbine Type
RPM of Mixer: 100
MOC of Shaft & Blades: SS 304
Motor KW: 1.1
including all incidental and operational charges etc,
as per approved drawings and as directed by
Page 347 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1132 ELEC- Supply and fixing, testing and commissioning of Each 160000
14.2.20 Aeration Blower
Capacity of Blower: 120Nm3/Hr @ 5.5 MWC
Type of Blower: Twin Lobe
MOC of Blower: CI
Speed of Blower : Less than 1000 RPM
Speed of Blower Motor: 1440 RPM
The Blower shall be complete with Blower & Motor
mounted on a common base frame, belt drive, belt
guard, Suction & Discharge Silencer, Air Filter,
Safety Valve, NRV, etc., complete.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1133 ELEC- Supply and fixing, testing and commissioning of Each 285000
14.2.21 Aeration Blower
Capacity of Blower: 504Nm3/Hr @ 5.5 MWC
Type of Blower: Twin Lobe
MOC of Blower: CI
Speed of Blower : Less than 1000 RPM
Speed of Blower Motor: 1440 RPM
The Blower shall be complete with Blower & Motor
mounted on a common base frame, belt drive, belt
guard, Suction & Discharge Silencer, Air Filter,
Safety Valve, NRV, etc., complete.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1134 ELEC- Supply and fixing, testing and commissioning of Air ONE 450
14.2.22 Piping from Blower upto Diffusers for Equalisation KG
Tank Blower & Aeration Blower
MOC of Exposed Pipes: SS 304
MOC of Vertical Drops: SS 304
MOC of Under Water pipes: SS 304
MOC of Guide Pipe & Lifting Chain: SS 304
The Air Piping shall be complete with Individual
blower delivery piping with NRV, Diaphragm Valve,
Main Header Piping from the Blower delivery up to
equ tank/aeration tank including drop/vertical piping,
Page 348 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
header along the tank, vertical drop pipes with
control valve & dismantling type joint, diffuser
header pipe & laterals with nozzles for diffuser, end
cap, vertical guide pipe at the other end of diffuser
header, lifting chain, etc., complete. The design of
piping shall be such that it should be possible to
remove diffusers from the tanks without emptying
tank & shutting off the system. The arrangement
shall be that the we should be able to take out the
Vertical drop pipe & the diffuser header just by
dismantling the joint in the vertical drop pipe and
should be able to refix the same in position.
Pipe Sizes: As per Diffuser Manufacturer
recommendations.
The Contractor has to provide detailed air piping calc
for the air pipes from the diffuser supplier to match
the specified blower. Battery Limit: Form Flange of
Blowers till diffuser
The Piping cost is inclusive all necessary materials
required for the piping like pipes, fittings, adopters,
flanges, fasteners, pipe supports, clamps, valves,
labour charges for fabrication, erection, pressure
testing, etc., complete.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1135 ELEC- Supply and fixing, testing and commissioning of Air ONE 340
14.2.23 Piping from Blower upto Diffusers for Equalisation KG
Tank Blower & Aeration Blower
MOC of Exposed Pipes: SS 304
MOC of Vertical Drops: SS 304
MOC of Under Water pipes: SS 304
MOC of Guide Pipe & Lifting Chain: SS 304
The Air Piping shall be complete with Individual
blower delivery piping with NRV, Diaphragm Valve,
Main Header Piping from the Blower delivery up to
equ tank/aeration tank including drop/vertical piping,
header along the tank, vertical drop pipes with
control valve & dismantling type joint, diffuser
header pipe & laterals with nozzles for diffuser, end
cap, vertical guide pipe at the other end of diffuser
header, lifting chain, etc., complete. The design of
piping shall be such that it should be possible to
Page 349 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
remove diffusers from the tanks without emptying
tank & shutting off the system. The arrangement
shall be that the we should be able to take out the
Vertical drop pipe & the diffuser header just by
dismantling the joint in the vertical drop pipe and
should be able to refix the same in position.
Pipe Sizes: As per Diffuser Manufacturer
recommendations.
The Contractor has to provide detailed air piping calc
for the air pipes from the diffuser supplier to match
the specified blower. Battery Limit: Form Flange of
Blowers till diffuser
The Piping cost is inclusive all necessary materials
required for the piping like pipes, fittings, adopters,
flanges, fasteners, pipe supports, clamps, valves,
labour charges for fabrication, erection, pressure
testing, etc., complete.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1136 ELEC- Supply, Transportation and fixing, testing and CUM 8352
14.2.24 commissioning of Media for MBBR (Moving Bed Bio-
Reactor) Tank
Volume of Media: Cu.m
Shape of Media: Conical Frustum
Surface Area:300-400 m2/m3 of media
Structure: Cylindrical with Fins
Sp Gravity: 0.9 to 0.95
MOC: P P UV Stabilised
No.of Pieces 50,000-70000 No/Cu.Mt
Weight per Cum 95 to 100 Kgs
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1137 ELEC- Supply and fixing, testing and commissioning of Nos 57000
14.2.25 Internal Recirculation Pump
Capacity of Pump: 1 Cu.m/Hr @ 5m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 10mm
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Page 350 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Accessories: Auto Coupling, SS304 Lifting Chain,
SS Guide Pipe, Control Panel with Level Switches
for auto Start & Stop
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work.
Final payment after Lab Testing treated water
satisfying the following parameters BOD less than
20, COD less than 50. Makes: As per list of
recommended brands.
1138 ELEC- Supply and fixing, testing and commissioning of Each 74750
14.2.26 Internal Recirculation Pump
Capacity of Pump: 15 Cu.m/Hr @ 3m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 80mm
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Accessories: Auto Coupling, SS304 Lifting Chain,
SS Guide Pipe, Control Panel with Level Switches
for auto Start & Stop
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work.
Final payment after Lab Testing treated water
satisfying the following parameters BOD less than 5,
COD less than 10. Makes: As per list of
recommended brands.
1139 ELEC- Supply and fixing, testing and commissioning of Each 90000
14.2.27 Internal Recirculation Pump
Capacity of Pump: 50.00 Cu.m/Hr @ 3m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 80mm
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Accessories: Auto Coupling, SS304 Lifting Chain,
SS Guide Pipe, Control Panel with Level Switches
for auto Start & Stop
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
Page 351 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
work.
Final payment after Lab Testing treated water
satisfying the following parameters BOD less than 5,
COD less than 10. Makes: As per list of
recommended brands.
1140 ELEC- Supply and fixing, testing and commissioning of Each 95000
14.2.28 Internal Recirculation Pump Capacity of Pump: 62.5
Cu.m/Hr @ 3m Head
Type of Pump: Non Clog Vertical Submersible
Solid Handling Size: 80mm
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
Accessories: Auto Coupling, SS304 Lifting Chain,
SS Guide Pipe, Control Panel with Level Switches
for auto Start & Stop
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Final payment after Lab Testing treated water
satisfying the following parameters BOD less than 5,
COD less than 10. Makes: As per list of
recommended brands.
1141 ELEC- Supply and fixing, testing and commissioning of Each 225000
14.2.29 Secondary Clarifier
To Suit: 3.0 m x 3.0 m x2.50m SWD (0.5m FB) Sq
Clarifier.
Floor Slope: 1 in 12Free Board: 0.5m
The Clarifier shall be to suit the Civil Tank (As per
the attached GA Drg ).The Launder top will be
finished to true level to ensure uniform overflow to
avoid overflow weirs.
The clarifier shall be complete with Mechanical
Bridge/Platform spanning across the tank with GI
Grating & Handrails for the entire length, Feed Well,
Central Drive mechanism, Centre shaft, scrapper
arm with neoprene squeezes, sludge pit cone
scrapper, etc., complete.
MOC: MSEP + GI Gratings + GI Handrails
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.

Page 352 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1142 ELEC- Supply and fixing, testing and commissioning of Each 350000
14.2.30 Secondary Clarifier
To Suit: 5.0 m x 5.0 m x 3.50m SWD (0.5m FB) Sq
Clarifier.
Floor Slope: 1 in 12
Free Board: 0.5m
The Clarifier shall be to suit the Civil Tank (As per
the attached GA Drg ).
The Launder top will be finished to true level to
ensure uniform overflow to avoid overflow weirs. The
clarifier shall be complete with
Mechanical Bridge/Platform spanning across the
tank with GI Grating & Handrails for the entire length,
Feed Well, Central Drive mechanism, Centre shaft,
scrapper arm with neoprene squeezes, sludge pit
cone scrapper, etc., complete.
MOC: MSEP + GI Gratings + GI Handrails
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1143 ELEC- Supply and fixing, testing and commissioning of Each 400000
14.2.31 Secondary Clarifier
To Suit: 9.1m x 9.1m x 3.0m SWD (0.5m FB) Sq
Clarifier.
Floor Slope: 1 in 12
Free Board: 0.5m
The Clarifier shall be to suit the Civil Tank (As per
the attached GA Drg ).
The Launder top will be finished to true level to
ensure uniform overflow to avoid overflow weirs.
Mechanical Bridge/Platform spanning across the
tank with GI Grating & Handrails for the entire length,
Feed Well, Central Drive mechanism, Centre shaft,
scrapper arm with neoprene squeezes, sludge pit
cone scrapper, etc., complete. MOC: MSEP + GI
Gratings + GI Handrails
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1144 ELEC - Supply and fixing, testing and commissioning of Nos 35000
14.2.32 Sludge Pump
Capacity of Pump : 1 Cu.m/Hr @ 5m Head
Page 353 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Type of Pump: Horizontal Centrifugal
Impeller Type: Non Clog
MOC of Impeller: CI
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item.
Makes: As per list of recommended brands.
1145 ELEC- Supply and fixing, testing and commissioning of Each 72240
14.2.33 Sludge Pump
Capacity of Pump: 25 Cu.m/Hr @ 3m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1146 ELEC- Supply and fixing, testing and commissioning of Each 100000
14.2.34 Sludge Pump
Capacity of Pump: 32 Cu.m/Hr @ 3m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Non Clog
MOC of Casing: CI
MOC of Impeller: CI
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1147 ELEC- Supply and fixing, testing and commissioning of UV Each 215000
14.2.35 Disinfection System
Flow: 25 Cu.m/Hr.
Type of Flow: Gravity
Type: UV Lamp covered with Quartz Glass
MOC of Enclosure: SS 304
Accessories: Control Panel
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1148 ELEC- Supply and fixing, testing and commissioning of UV Each 235000
14.2.36 Disinfection System

Page 354 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Flow: 32 Cu.m/Hr. Type of Flow: Gravity
Type: UV Lamp covered with Quartz Glass
MOC of Enclosure: SS 304
Accessories: Control Panel
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1149 ELEC - Supply and fixing, testing and commissioning of Nos. 34500
14.2.37 Filter Feed Pump
Capacity of Pump: 5 Cu.m/Hr @ 20m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Closed
MOC of Casing: CI
MOC of Impeller: CI
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1150 ELEC- Supply and fixing, testing and commissioning of Each 94000
14.2.38 Filter Feed Pump
Capacity of Pump: 25 Cu.m/Hr @ 30m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Semi Open
MOC of Casing: CI
MOC of Impeller: CI
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1151 ELEC- Supply and fixing, testing and commissioning of Each 118000
14.2.39 Filter Feed Pump
Capacity of Pump: 33.5 Cu.m/Hr @ 30m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Semi Open
MOC of Casing: CI
MOC of Impeller: CI
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1152 ELEC- Supply and fixing, testing and commissioning of Each 115000

Page 355 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
14.2.40 Pressure Sand Filter
Capacity of Filter: 7.50 Cu.m/Hr.
Minimum Dia of Filter: 0.90m
Minimum HOS of Filter: 1.8m
Minimum Height of Filter Sand: 0.30m
Minimum Plate Thickness for Shell & Dish: 6mm
Type of Underdrain: Nozzle Plate with Plastic
Nozzles
Type of Inlet: Inlet Distribution Box/ Bell Mouth.
Specification for Filter Media: As per CPHEEO
Manual
Accessories: Frontal Piping & Valves.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1153 ELEC- Supply and fixing, testing and commissioning of Each 207000
14.2.41 Pressure Sand Filter
Capacity of Filter: 32.50 Cu.m/Hr.
Minimum Dia of Filter: 1.8m
Minimum HOS of Filter: 1.5m
Minimum Height of Filter Sand: 0.75m
Minimum Plate Thickness for Shell & Dish: 6mm
Type of Underdrain: Nozzle Plate with Plastic
Nozzles
Type of Inlet: Inlet Distribution Box/ Bell Mouth.
Specification for Filter Media: As per CPHEEO
Manual
MOC of Filter: MSEP
Accessories: Frontal Piping & Valves.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1154 ELEC- Supply and fixing, testing and commissioning of Each 160000
14.2.42 Activated Carbon Filter
Capacity of Filter: 7.50 Cu.m/Hr.
Minimum Dia of Filter: 0.70m
Minimum HOS of Filter: 1.8m
Minimum Height of Activated Carbon: 0.30m
Minimum Plate Thickness for Shell & Dish: 6mm
Type of Underdrain: Nozzle Plate with Plastic
Nozzles
Type of Inlet: Inlet Distribution Box.
Page 356 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Type of Activated Carbon: Coal Based/Coconut shell
Minimum Iodine Value for Activated Carbon: 1000
MOC of Filter: MSEP
Accessories: Frontal Piping & Valves.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1155 ELEC- Supply and fixing, testing and commissioning of Each 265000
14.2.43 Activated Carbon Filter
Capacity of Filter: 32.50 Cu.m/Hr.
Minimum Dia of Filter: 1.90m
Minimum HOS of Filter: 1.5m
Minimum Height of Activated Carbon: 0.75m
Minimum Plate Thickness for Shell & Dish: 6mm
Type of Underdrain: Nozzle Plate with Plastic
Nozzles
Type of Inlet: Inlet Distribution Box.
Type of Activated Carbon: Coal Based/Coconut shell
Minimum Iodine Value for Activated Carbon: 1000
MOC of Filter: MSEP
Accessories: Frontal Piping & Valves.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1156 ELEC- Supply and fixing, testing and commissioning of Syste 40000
14.2.44 Hypochlorite solution dosing System Dosing System m
shall be complete with 1 No. - 100 Lit Capacity
HDPE Tank with Inlet & Outlet Connections, Level
Indicator Dosing Pump, 0 - 5 LPH Capacity, 2 Nos.
Complete Flexible Tubing with Valves, NRV's,
Strainers, etc., from Dosing Tank to dosing Point
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1157 ELEC- Supply and fixing, testing and commissioning of Syste 28750
14.2.45 FeCl3 solution dosing System Dosing System shall m
be complete with 1 No. - 50 Lit Capacity HDPE Tank
with Inlet & Outlet Connections, Level Indicator 1 No.
- Agitator to suit 50 Lit HDPE tank of SS 304 MOC,
100 RPM speed. Dosing Pump, 0 - 6 LPH Capacity,
Page 357 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
2 Nos. Complete Flexible Tubing with Valves, NRV's,
Strainers, etc., from Dosing Tank to dosing Point
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1158 ELEC - Supply and fixing, testing and commissioning of Nos 39000
14.2.46 Treated Water Pump
Capacity of Pump: 5 Cu.m/Hr @ 20m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Closed
MOC of Casing: CI
MOC of Impeller: CI
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1159 ELEC- Supply and fixing, testing and commissioning of Each 75000
14.2.47 Treated Water Pump Capacity of Pump: 15 Cu.m/Hr
@ 20m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Semi Open
MOC of Casing: CI
MOC of Impeller: CI
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1160 ELEC- Supply and fixing, testing and commissioning of Each 80000
14.2.48 Treated Water Pump
Capacity of Pump: 32 Cu.m/Hr @ 30m Head
Type of Pump: Horizontal Centrifugal
Impeller Type: Semi Open
MOC of Casing: CI
MOC of Impeller: CI
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1161 ELEC- Supply and fixing, testing and commissioning of Each 52000
14.2.49 Filter Press Feed Pump Capacity of Pump: 1
Cu.m/Hr @ 20m Head

Page 358 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
Type of Pump: Screw Pump
Impeller Type: Screw
MOC of Casing: CI
MOC of stator : Nitrile
MOC of rotor : SS 304
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1162 ELEC- Supply and fixing, testing and commissioning of Each 132000
14.2.50 Manual Plate Filter Press Size of Plate: 610 x
610mm
No. of Chambers: 8 Chamber
Operation: Hydraulic Pump
Capacity: For Dewatering of 2 Cu.m/Day, 3% Sludge
in 10Hour
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1163 ELEC- Supply and fixing, testing and commissioning of Each 250000
14.2.51 Manual Plate Filter Press Size of Plate: 610 x
610mm
No. of Chambers: 16 Chamber
Operation: Hydraulic Pump
Capacity: For Dewatering of 5 Cu.m/Day, 3% Sludge
in 12 Hour
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1164 ELEC- Supply and fixing, testing and commissioning of Syste 65000
14.2.52 Dewatering PE solution dosing System m
Dosing System shall be complete with 2 Nos. - 50 Lit
Capacity HDPE Tank with Inlet & Outlet
Connections, Level Indicator.
2 Nos. - Agitator to suit 100 Lit HDPE tank of SS 304
MOC, 100 RPM speed.
Complete Flexible Tubing with Valves, NRV's,
Strainers, etc., from Dosing Tank to dosing Point
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
Page 359 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
work. Makes: As per list of recommended brands.
1165 ELEC- Supply and fixing, testing and commissioning of Jib Each 120000
14.2.53 Crane for Lifting of Submersible Pumps
Capacity : 0.5 Ton
Min Clear Height: 2.50m to the Bottom of the Hook
(From Base plate).
Degree of Rotation: 360 Degrees.
Length of Boom: 2.0m to the Centre of Lifting Hook
from the centre of mast.
Rotating Operation: Manual
Accessories Reqd: 0.5 Ton Capacity Chain Pulley
Block with Lifting Chain of 9.0m + Trolley of reputed
make.
Mast section: Circular Mast of required Height
Method of Installation: By Welding to Fish Plate
embedded in concrete.
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1166 ELEC- Supply and fixing, testing and commissioning of CUM 8500
14.2.54 Tube Settler Media for Settling tank
Volume of Media: 48 Cu.m
Shape of Media: Vertical Plate
Structure: Sheet with locking arrangement
MOC: PVC
No.of Pieces 150 per Cum (Size 1 Mtr x 0.5)
including all incidental and operational charges etc,
as per approved drawings and as directed by
Engineer-in-charge complete for finished item of
work. Makes: As per list of recommended brands.
1167 ELEC- Supplying, Laying, Testing & Commissioning of Piping from Last
14.2.55 Manhole to Coarse Screen Chamber……..complete piping for the MLD
E&STP to match the P & ID and to match the layout, using suitable
material pipes of approved makes conforming to IS, including pipe
specials like bends of suitable degree, elbow, tee, union/flanges, values,
fasteners, Cutting the pipes to requirement, making joints with pipe
specials, earth work excavation, laying, refilling as required, or in pipe
supports including its foundation, pipe supports, clamping system, etc.,
Conducting wet run, rectifying the leaks if any in laid pipe work, etc,
complete with valves as applicable. Battery Limits: From Head Manhole
near the STP-I (Approx. 15m), piping for Treated Water Pump for a
length of 100m from the STP boundary. The complete piping within the
Page 360 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
E&STP area shall be contractor's scope. Makes: As per list of
recommended brands.
a 100 Dia PVC 10 KSC Pipe 1 RM 650
b 300 Dia PVC 10 KSC Pipe 1 RM 1050
1168 ELEC- Supplying, Laying, Testing & Commissioning of Delivery Piping with
14.2.56 Valves & NRV for Raw Effluent/Sewage Pump up to Inlet
Chamber…….complete piping for the MLD E&STP to match the P & ID
and to match the layout, using suitable material pipes of approved makes
conforming to IS, including pipe specials like bends of suitable degree,
elbow, tee, union/flanges, values, fasteners, Cutting the pipes to
requirement, making joints with pipe specials, earth work excavation,
laying, refilling as required, or in pipe supports including its foundation,
pipe supports, clamping system, etc., Conducting wet run, rectifying the
leaks if any in laid pipe work, etc, complete with valves as applicable.
Battery Limits: From Head Manhole near the STP-I (Approx. 15m), piping
for Treated Water Pump for a length of 100m from the STP boundary.
The complete piping within the E&STP area shall be contractor's scope.
Makes: As per list of recommended brands.
a 80 NB - DI Pipe 1 RM 750
b 100 NB - DI Pipe 1 RM 900
1169 ELEC- Supplying, Laying, Testing & Commissioning of 1 RM 750
14.2.57 Delivery Piping with Valves & NRV for Equ Effluent/
Sewage Pump up to Anoxic Tank - 80 NB - uPVC
Sch 40 Pipe complete piping for the MLD E&STP to
match the P & ID and to match the layout, using
suitable material pipes of approved makes
conforming to IS, including pipe specials like bends
of suitable degree, elbow, tee, union/flanges, values,
fasteners, Cutting the pipes to requirement, making
joints with pipe specials, earth work excavation,
laying, refilling as required, or in pipe supports
including its foundation, pipe supports, clamping
system, etc., Conducting wet run, rectifying the leaks
if any in laid pipe work, etc, complete with valves as
applicable. Battery Limits: From Head Manhole near
the STP-I (Approx. 15m), piping for Treated Water
Pump for a length of 100m from the STP boundary.
The complete piping within the E&STP area shall be
contractor's scope. Makes: As per list of
recommended brands.

Page 361 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1170 ELEC- Supplying, Laying, Testing & Commissioning of Delivery Piping with
14.2.58 Valves & NRV for Internal Recirculation Pump up to Inlet of Anoxic
Tank…….complete piping for the MLD E&STP to match the P & ID and to
match the layout, using suitable material pipes of approved makes
conforming to IS, including pipe specials like bends of suitable degree,
elbow, tee, union/flanges, values, fasteners, Cutting the pipes to
requirement, making joints with pipe specials, earth work excavation,
laying, refilling as required, or in pipe supports including its foundation,
pipe supports, clamping system, etc., Conducting wet run, rectifying the
leaks if any in laid pipe work, etc, complete with valves as applicable.
Battery Limits: From Head Manhole near the STP-I (Approx. 15m), piping
for Treated Water Pump for a length of 100m from the STP boundary.
The complete piping within the E&STP area shall be contractor's scope.
Makes: As per list of recommended brands.
a 80 NB - uPVC Sch 40 Pipe 1 RM 750
b 100 NB - uPVC Sch 40 Pipe 1 RM 950
1171 ELEC- Supplying, Laying, Testing & Commissioning of Piping from Sec Clarifier
14.2.59 Launder Outlet to Filter Feed Tank through UV disinfection
module……complete piping for the MLD E&STP to match the P & ID and
to match the layout, using suitable material pipes of approved makes
conforming to IS, including pipe specials like bends of suitable degree,
elbow, tee, union/flanges, values, fasteners, Cutting the pipes to
requirement, making joints with pipe specials, earth work excavation,
laying, refilling as required, or in pipe supports including its foundation,
pipe supports, clamping system, etc., Conducting wet run, rectifying the
leaks if any in laid pipe work, etc, complete with valves as applicable.
Battery Limits: From Head Manhole near the STP-I (Approx. 15m), piping
for Treated Water Pump for a length of 100m from the STP boundary.
The complete piping within the E&STP area shall be contractor's scope.
Makes: As per list of recommended brands.
a 80 NB uPVC Sch 40 Pipe 1 RM 750
b 125 NB uPVC Sch 40 Pipe 1 RM 1150
1172 ELEC- Supplying, Laying, Testing & Commissioning of 1 RM 750
14.2.60 Filter Feed Pump Suction (Dual Suction, one from
Filter Feed Tank & second from UF Feed Tank) and
Delivery Piping with valves, NRV, up to frontal piping
of PSF &ACF - 80 NB uPVC Sch 40 Pipe complete
piping for the MLD E&STP to match the P & ID and
to match the layout, using suitable material pipes of
approved makes conforming to IS, including pipe
specials like bends of suitable degree, elbow, tee,
Page 362 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
union/flanges, values, fasteners, Cutting the pipes to
requirement, making joints with pipe specials, earth
work excavation, laying, refilling as required, or in
pipe supports including its foundation, pipe supports,
clamping system, etc., Conducting wet run, rectifying
the leaks if any in laid pipe work, etc, complete with
valves as applicable. Battery Limits: From Head
Manhole near the STP-I (Approx. 15m), piping for
Treated Water Pump for a length of 100m from the
STP boundary. The complete piping within the
E&STP area shall be contractor's scope. Makes: As
per list of recommended brands.
1173 ELEC- Supplying, Laying, Testing & Commissioning of Filter Feed Pump
14.2.61 Suction (Dual Suction, one from Filter Feed Tank & second from UF Feed
Tank) and Delivery Piping with valves, NRV, up to frontal piping of PSF
&ACF…..complete piping for the MLD E&STP to match the P & ID and to
match the layout, using suitable material pipes of approved makes
conforming to IS, including pipe specials like bends of suitable degree,
elbow, tee, union/flanges, values, fasteners, Cutting the pipes to
requirement, making joints with pipe specials, earth work excavation,
laying, refilling as required, or in pipe supports including its foundation,
pipe supports, clamping system, etc., Conducting wet run, rectifying the
leaks if any in laid pipe work, etc, complete with valves as applicable.
Battery Limits: From Head Manhole near the STP-I (Approx. 15m), piping
for Treated Water Pump for a length of 100m from the STP boundary.
The complete piping within the E&STP area shall be contractor's scope.
Makes: As per list of recommended brands.
a 65 NB - uPVC Sch 40 Pipe 1 RM 650
b 80 NB - uPVC Sch 40 Pipe 1 RM 750
1174 ELEC- SITC of DO Meter of approved make with Each 50000
14.2.62 interconnection wiring for auto switching on and off
of Blowers, based on the DO Levels of the aeration
tank. Makes: As per list of recommended brands.
1175 ELEC- SITC of 50 Dia Electro Magnetic Flow Meter with Each 50000
14.2.63 local & remote indication panel with totaliser,
including wiring between instrument & remote
indicator, power supply wiring, etc., complete.
Makes: As per list of recommended brands.
1175 ELEC- Supply, installation, testing and commissioning of Each 700
14.2.64 Bourden type, stainless steel dial type pressure
gauge with isolation valve and pipe having
Page 363 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
calibration of 0-16 kg/cm2. Makes: As per list of
recommended brands.
BUILDING MANAGEMENT SYSTEMS
1177 ELEC- Supply, Installation, Testing & Commissioning of Set 434500
14.3.1 BMS server with following latest Intel
microprocessor Xeon or higher processor, 2.7 to
3.0Ghz or above clock speed, 16 GB expandable up
to 32GB DDR 4 RAM,HDD - 1TB SATA, R/W CD /
DVD drive, Flat Monitor - 32" LED, Serial Ports - 2
Nos, USB Ports - 4 Nos, Network Card
10/100/1000MB, Graphics card 1GB, Windows
Operating System-Higher version, MS office suite
Anti virus, Optical mouse & key board etc.as per
detailed technical specifications and approved make
including all charges complete etc as directed by
Engineer In charge/ departmental authorities.
Makes: As per list of recommended brands.
1178 ELEC- Supply, Installation, Testing & Commissioning of Set 104500
14.3.2 BMS Client Workstation with following Latest Intel
microprocessor i7 / higher , 2.7 to 3.0Ghz or above
clock speed, 8GB expandable up to 32GB DDR 4
RAM, HDD - 1TB SATA ,R/W CD / DVD drive, Flat
Monitor - 32" LED, Serial Ports - 2 Nos. USB Ports -
4 Nos with at least 2 NOs USB 3.0 Ports, Network
Card 10/100/1000MB - 2 Nosography card
1GB,Windows 10 Operating System / Higher, MS
office suite Anti virus, Optical mouse & key board
etc.as per detailed technical specifications and
approved.
Makes: As per list of recommended brands.
1179 ELEC- Supply, Installation, Testing & Commissioning of Set 715000
14.3.3 Building Control System Software - MAIN BMS
SERVER SOFTWARE, of the following windows
based graphical software for IBMS system with 1No
Client for Operator workstation, 1No Client for
Engineer workstation. The Software shall have 3D &
HD vector dynamic graphics with Autocad import of
plan with Zoom In & Zoom Out facility, Native 64 Bit
System , BTL,UL,EN Certified System, BACnet
Profile B-AWS (Advanced workstation) as per the
BTL Listing, dot net platform, Certified OPC DA
Server by OPC Foundation, Web-Based Server

Page 364 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
software shall permit use of Standard Web-Browsers
such as Microsoft Internet Explorer, Chrome, Firefox,
Netscape Navigator, etc. The Software shall comply
to international standards and strive to deliver
products that meet security standards such as
ISA/IEC 62443, UL2900, ISO/IEC 27001,
ISO/IEC62443 and OWASP. Cybersecurity audit trail
, 4-eye principle , Seamless integration of certificates
within customer IT infrastructure, Microsoft’s active
directory-based authentication, Use of network
infrastructure that supports physical network or
VLAN segmentation, Placing the web server in a
“demilitarized zone” (DMZ), End-to-end encryption,
from client to server, End-to-end encryption
between servers, Certificate-based data exchange,
Encrypted backups. The software shall have the
capability to integrate with BIM Modelling. The
software shall be Energy Conservation Calculation
Software, Energy Management & Engineering
Software and Software license shall be for 100%
spare license. The software shall be Server based
with all other accessories complete as required
including all charges complete etc as directed by
Engineer In charge/ departmental authorities.
Makes: As per list of recommended brands.
1180 ELEC- DDC for Air Handling Unit -( 2 AHU per DDC)- Set 68200
14.3.4 Supply, Installation, Testing & Commissioning of 32
Bit Microprocessor true IP Based DDC supporting
and I/O's designed as per the IO Summary with all
other mounting accessories, The controller shall
have inbuilt 2-port Ethernet switch . The controller
shall have 16 inputs/outputs inbuilt and can be
expandable upto max 40 points by Input/Output
Modules, The DDC shall have 300 Mhz processor
with 128 MByte SDRAM (DDR3) and 512 MByte
NAND Flash. Each DDC should contain 20% spare
IO for each type of below mentioned IO's. DDC
Internal Cabling shall be BMS vendor scope. For
more Details, Please refer IO Summary and as per
detailed technical specifications and approved make
including all charges complete etc as directed by
Engineer In charge/ departmental authorities.
Makes: As per list of recommended brands.

Page 365 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1181 ELEC- DDC for OT - Air Handling Unit - (1 AHU per DDC)- Set 62091
14.3.5 SITC of True IP Based DDC Standalone 32 Bit
Intelligent, peer to peer communication,
interoperable DDC as per the specification. The
compact controller shall have inbuilt 2-port Ethernet
switch with WLAN interface. The controller shall
have 16 inputs/outputs inbuilt and can be
expandable upto max 40 points by Input/Output
Modules. The DDC shall have 300 Mhz processor
with 128 MByte SDRAM (DDR3) and 512 MByte
NAND Flash. The controller shall be freely
programmable and have System functions (alarming,
scheduling, trending, access protection with
individually definable user profiles and categories). It
should have Cloud connectivity for remote access
and inbuilt port for POT for local interface.
Makes: As per list of recommended brands.
1182 ELEC- DDC for Ventilation and Lift Lobby Pressurization Set 60716
14.3.6 Fans- (4 Fans per DDC)- SITC of True IP Based
DDC Standalone 32 Bit Intelligent, peer to peer
communication, interoperable DDC as per the
specification. The compact controller shall have
inbuilt 2-port Ethernet switch with WLAN interface.
The controller shall have 16 inputs/outputs inbuilt
and can be expandable upto max 40 points by
Input/Output Modules. The DDC shall have 300 Mhz
processor with 128 MByte SDRAM (DDR3) and 512
MByte NAND Flash. The controller shall be freely
programmable and have System functions (alarming,
scheduling, trending, access protection with
individually definable user profiles and categories). It
should have Cloud connectivity for remote access
and inbuilt port for POT for local interface.
Makes: As per list of recommended brands.
1183 ELEC- DG - SITC of True IP Based DDC Standalone 32 Bit Set 66550
14.3.7 Intelligent, peer to peer communication,
interoperable DDC as per the specification. The
compact controller shall have inbuilt 2-port Ethernet
switch with WLAN interface. The controller shall
have 16 inputs/outputs inbuilt and can be
expandable upto max 40 points by Input/Output
Modules. The DDC shall have 300 Mhz processor
with 128 MByte SDRAM (DDR3) and 512 MByte
NAND Flash. The controller shall be freely
Page 366 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
programmable and have System functions (alarming,
scheduling, trending, access protection with
individually definable user profiles and categories). It
should have Cloud connectivity for remote access
and inbuilt port for PO.
Makes: As per list of recommended brands.
1184 ELEC- DDC for Transformer/HT/LT- Supply, Installation, Each 198520
14.3.8 Testing & Commissioning of 32 Bit Microprocessor
true IP Based DDC supporting and I/O's designed
as per the IO Summary with all other mounting
accessories, The controller shall have inbuilt 2-port
Ethernet switch . The controller shall have 16
inputs/outputs inbuilt and can be expandable upto
max 40 points by Input/Output Modules,The DDC
shall have 300 Mhz processor with 128 MByte
SDRAM (DDR3) and 512 MByte NAND Flash. Each
DDC should contain 20% spare IO for each type of
below mentioned IO's. DDC Internal Cabling shall
be BMS vendor scope. For more Details, Please
refer IO Summary. As per detailed technical
specifications and approved make including all
charges complete etc as directed by Engineer In
charge/ departmental authorities.
Makes: As per list of recommended brands.
1185 ELEC- DDC for Lifts- Supply, Installation, Testing & Each 66550
14.3.9 Commissioning of 32 Bit Microprocessor true IP
Based DDC supporting and I/O's designed as per
the IO Summary with all other mounting
accessories, The controller shall have inbuilt 2-port
Ethernet switch . The controller shall have 16
inputs/outputs inbuilt and can be expandable upto
max 40 points by Input/Output Modules, The DDC
shall have 300 Mhz processor with 128 MByte
SDRAM (DDR3) and 512 MByte NAND Flash. Each
DDC should contain 20% spare IO for each type of
below mentioned IO's. DDC Internal Cabling shall
be BMS vendor scope. For more Details, Please
refer IO Summary.as per detailed technical
specifications and approved make including all
charges complete etc as directed by Engineer In
charge/ departmental authorities.
Makes: As per list of recommended brands.
1186 ELEC- DDC for Plumbing System & Fire Fighting - Supply, Each 63800
Page 367 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
14.3.10 Installation, Testing & Commissioning of 32 Bit
Microprocessor true IP Based DDC supporting and
I/O's designed as per the IO Summary with all other
mounting accessories, The controller shall have
inbuilt 2-port Ethernet switch . The controller shall
have 16 inputs/outputs inbuilt and can be
expandable upto max 40 points by Input/Output
Modules, The DDC shall have 300 Mhz processor
with 128 MByte SDRAM (DDR3) and 512 MByte
NAND Flash. Each DDC should contain 20% spare
IO for each type of below mentioned IO's. DDC
Internal Cabling shall be BMS vendor scope. For
more Details, Please refer IO Summary,. As per
detailed technical specifications and approved make
including all charges complete etc as directed by
Engineer In charge/ departmental authorities.
Makes: As per list of recommended brands.
1187 ELEC- Software Integration- SITC of True IP Based BTL & Job 275000
14.3.11 UL Listed for third party integration for AHU VFD's,
VRV System, Thermostats, DG/UPS/LT/HT Panel
and Fire Alarm Systems. The controller shall have 2-
port Ethernet switch and WLAN interface. It should
have BTL label (BACnet communications passed the
BTL test) and consisting of Dual microprocessor with
Storage capacity of 1 GB RAM. It should support
Real Time clock upto 7 Days. It should Support of
the major communication protocols: BACnet,/IP,
BACnet MS/TP, Modbus IP and Modbus RTU upto
500 points. Integrator shall be of same make only.
Makes: As per list of recommended brands.
1188 ELEC- Supply, Installation, Testing & Commissioning of Each 20684
14.3.12 Ambient Temperature + RH Sensor with all the
mounting accessories included. Temp sensor shall
be Pt 1000 RTD type with 4 to 20mA transmitter or
thermistor type and RH sensor shall be capacitive
type with 4 to 20mA transmitter. The temperature
measurement range shall be 0 to 50oC and humidity
range shall be 0 to 95% RH as technical
specification with all other mounting accessories
complete as required including all charges complete
etc as directed by Engineer In charge/ departmental
authorities.
Makes: As per list of recommended brands.

Page 368 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1189 ELEC- Supply, fixing, Testing & Commissioning of Room Nos 15048
14.3.13 Type Temperature + Humidity Sensor including all
charges complete etc as directed by Engineer In
charge/ departmental authorities.
Makes: As per list of recommended brands.
1190 ELEC- Supply, Installation, Testing & Commissioning of Each 2696
14.3.14 Differential Pressure Switch (DPS ) with all the
mounting accessories included. The maximum
pressure limit shall be 0-1000Pa as technical
specification with all other mounting accessories
complete as required. Field Devices & internal
cabling of AHU shall be BMS vendor scope including
all charges complete etc as directed by Engineer In
charge/ departmental authorities.
Makes: As per list of recommended brands.
1191 ELEC- Supply, Installation, Testing & Commissioning of Each 7534
14.3.15 Duct Static Pressure Sensor with all the mounting
accessories included. The maximum pr limit shall be
0-500Pa all other mounting accessories complete as
required. Field Devices & internal cabling of AHU
shall be BMS vendor scope including all charges
complete etc as directed by Engineer In charge/
departmental authorities.
Makes: As per list of recommended brands.
1192 ELEC- Supply, fixing, Testing & Commissioning of Duct Nos 3733
14.3.16 Temperature Sensors including all charges
complete etc as directed by Engineer In charge/
departmental authorities.
Makes: As per list of recommended brands.
1193 ELEC- Supply, installation, testing and commissioning of Each 17365
14.3.17 Return air CO2 Sensor including all charges
complete etc as directed by Engineer In Charge/
departmental authorities.
Makes: As per list of recommended brands.
1194 ELEC- Supply, fixing, Testing & Commissioning of Current Nos 2255
14.3.18 Relay including all charges complete etc as directed
by Engineer In charge/ departmental authorities.
Makes: As per list of recommended brands.
1195 ELEC- Supply, fixing, Testing & Commissioning of Voltage Each 7150
14.3.19 Transducer including all charges complete etc as
directed by Engineer In charge/ departmental

Page 369 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
authorities.
Makes: As per list of recommended brands.
1196 ELEC- Supply, fixing, Testing & Commissioning of Each 21437
14.3.20 Ultrasonic Water Level Sensor (Note: Level should
indicate as Litre basis in BMS Screen) for Water
tank as technical specification with all other
mounting accessories including all charges
complete etc as directed by Engineer In Charge/
departmental authorities.
Makes: As per list of recommended brands.
1197 ELEC- Supply, fixing, Testing & Commissioning of Flame Each 13594
14.3.21 Proof Diesel Level Sensor for Diesel Day Tank
Monitoring. Tank Height 1 Mtr including all charges
complete etc as directed by Engineer In charge/
departmental authorities.
Makes: As per list of recommended brands.
ACCESS CONTROL SYSTEMS
1198 ELEC- Supply and installation of Biometric Thumb reader Each 20592
14.4.1 with Proximity card readers based on RFID
technology with Keypad, with Back Plate including all
fixing accessories. Rate shall include required
accessories, tools and tackles,transportation,
material and labour etc., complete as instructed by
Engineer In charge. The contractor should follow the
safety measures inside the premises.
Makes: As per list of recommended brands.
1199 ELEC- Supply and installation of Proximity card readers Each 11960
14.4.2 based on RFID technology, along with Back Plate
including all fixing accessories. Rate shall include
required accessories, tools and
tackles,transportation, material and labour etc.,
complete as instructed by Engineer In charge. The
contractor should follow the safety measures inside
the premises.
Makes: As per list of recommended brands.
1200 ELEC- Supply and installation of Proximity Access Card Each 291
14.4.3 (16k bit with 2 application areas) with print as per
client requirement.
Makes: As per list of recommended brands.
1201 ELEC- Supply and installation of Exit Push Button (Egress Each 635
14.4.4 Switch), Rate shall include required accessories,
Page 370 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
tools and tackles, transportation, material and labour
etc., complete as instructed by Engineer In charge.
The contractor should follow the safety measures
inside the premises.
Makes: As per list of recommended brands.
1202 ELEC- Supply and installation of Single Leaf 600 Lbs Each 2964
14.4.5 Magnetic Lock with required mounting accessories,
Rate shall include required accessories, tools and
tackles, transportation, material and labour etc.,
complete as instructed by Engineer In charge. The
contractor should follow the safety
measures inside the premises.
Makes: As per list of recommended brands.
1203 ELEC- Supply and installation of Double Leaf Magnetic Each 5876
14.4.6 Lock with required mounting accessories, Rate shall
include required accessories, tools and tackles,
transportation, material and
labour etc., complete as instructed by Engineer In
charge. The contractor should follow the safety
measures inside the premises.
Makes: As per list of recommended brands.
1204 ELEC- Supply and installation of UL, CE approved Access Each 36400
14.4.7 Controller - Smart card reader interfaces for 2 door,
supports up to 4 smart card reader interfaces,
Network connection to the host system and Compact
Flash, RS485, RS232 or Ethernet connectivity,
20,000 cardholders
data & up to 100,000 transaction detail storage.
Makes: As per list of recommended brands.
1205 ELEC- Supply and installation of ACCESS DOOR Each 6760
14.4.8 CONTROLLER housing shall be in accordance with
UL guidelines and is used for securely mounting and
housing the Access Controller, extensions and the
power supplies.
Makes: As per list of recommended brands.
1206 ELEC- Supply and installation of Power supply with battery Each 8528
14.4.9 charger
for ACCESS DOOR CONTROLLER
Shall be with Selectable 12 VDC or 24 VDC voltage
output
Overvoltage protection
Regulates battery charging voltage
Page 371 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
The product is classified in accordance with the
following
standards:
• EN 55022 Class B
• EN 55024
• IEC / UL / EN 60950 & CSA (product safety)
• CE
The Power supply can be mounted on rails and
installed in
the housing.
Makes: As per list of recommended brands.
1207 ELEC- Supply and installation of Door Buzzer, Rate shall Each 676
14.4.10 include required accessories, tools and tackles,
transportation, material and labour etc., complete as
instructed by Engineer In charge. The contractor
should follow the safety measures inside the
premises.
Makes: As per list of recommended brands.
1208 ELEC- Supply of MS Junction boxes for mounting Each 350
14.4.11 readers/exit switch/break
glass in wall / partitions.
Makes: As per list of recommended brands.
NURSE-CALL SYSTEM
1209 ELEC- Deleted Each Deleted
14.5.1
1210 ELEC- Deleted Each Deleted
14.5.2
1211 ELEC- Deleted Each Deleted
14.5.3
1212 ELEC- Deleted Each Deleted
14.5.4
1213 ELEC- Deleted Each Deleted
14.5.5
1214 ELEC- Deleted Each Deleted
14.5.6
1215 ELEC- Deleted Each Deleted
14.5.7
1216 ELEC- Deleted Each Deleted
14.5.8
Page 372 of
8
 Basic
Rate
SL. CFMS ITEM
NO. DESCRIPTION OF ITEM Unit for SOR
CODE CODE
2024-25
(2018-
(Rs.)
19)
1 2 3 4 5
1217 ELEC- Deleted Each Deleted
14.5.9
1218 ELEC- Deleted Each Deleted
14.5.10
1219 ELEC- Deleted Each Deleted
14.5.11
1220 ELEC- Deleted Each Deleted
14.5.12

Page 373 of
8
 Electrical & Electro Mechanical items
(List of Recommended brands/Manufacturers for guidance of field engineers)

S.No Item Code Category Makes

SECTION – 1
1.1 M.S. CONDUIT PIPES
1 ELEC-1.1.1 …… Makes: NAI / Bharath / GB / AKG/Precision.
1.2 PVC CONDUIT PIPES
2 ELEC1.2.1/ …… Makes: Precision/Universal& Marudhar/VIP /
1.2.2/1.2.6/1.2. GoldMedal / Million plast / GM / Sudhakar
7/1.2.8 /Polycab/Anchor/ Polyline/
Orbit/AKG/Beljin/Vasavi/DEC
3 ELEC-1.2.3 …… Makes: Precision/VIP / Modi/ GoldMedal / Million plast
/ GM / Sudhakar / Polyline/Orbit/Anchor/Beljin
4 ELEC- …… Make:Precision/ VIP / GoldMedal / Million plast /
1.2.4 /1.2.5 Sudhakar / Polyline/Anchor/Beljin
5 ELEC- Make: Legrand/ Modi/ Honeywell
1.2.10
1.5 COPPER FLEXIBLE CABLES (AS PER IS:694)
6 ELEC-1.5.1 CATEGOR Makes: Finolex / RR kabel / Havells/Finecab/
Y- I KEI/Polycab/Gloster/Goldmedal/GM/ Fortune
Arrt/Anchor/Million/ APAR(Anushakthi)
7 ELEC-1.5.2 CATEGOR Makes: V-Guard/Bonton / HPL /Sudhakar/Orbit/
Y- II Tamra/ /Plaza/ Vihan/Ollvin/Laser/Beljin/Rhino/
Standard / Vimal /DEC /Unistar/LS cable/
AKG/Nakoda
8 ELEC-1.5.3 CATEGOR Makes: Star / Airson/ Benlo / Gemscab
Y- III /Rajnigandha/ Avocab /CRI /Salzer /Spykaar
/Unicab/Fybros/A-Flex/Foursun/Vimcab
SHEATHED FLEXIBLE COPPER CABLES
9 ELEC-1.5.4 CATEGOR Makes: Finolex / RR kabel / Havells/ Finecab
Y- I /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune
Arrt/Anchor /Million
10 ELEC-1.5.5 CATEGOR Makes: V-Guard/Bonton/ HPL / Sudhakar/Orbit/
Y- II Tamra/ /Plaza/ Vihan/Spykaar/ Ollvin /Laser /Beljin
/Rhino/ Standard/ Vimal/DEC/Unistar/Fybros/A-
Flex//LS cable/ Foursun/Vimcab/Nakoda
11 ELEC-1.5.6 …… Makes: Finolex / Polycab / Havells / V-Guard / Gold
Medal / GM / Million / Vimal /Airson/CRI/ Tamra/
ollvin/Avocab
12 ELEC-1.5.7 CATEGOR Makes: Finolex / RR kabel / Havells
Y- I KEI/Polycab/Gloster/Goldmedal/GM/Million
13 ELEC-1.5.8 CATEGOR Makes: V-Guard/Bonton /Finecab/ HPL /Fortune Arrt
Y- II / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/
Vihan/Ollvin/Laser/Beljin/Rhino/ Standard / Vimal
1.6 SERVICE MAINS AND FLAT CABLE FOR

Page 374 of
8
 SUBMERSIBLEMOTORS.
14 ELEC- …… Makes:GoldMedal/Million/GM/Vimal/Finecab/ Nakoda /
1.6.1/1.6.2 Plaza/ Payal / Sudhakar/ Rajnigandha/
Airson/Orbit/ollvin/Beljin
15 ELEC-1.6.3 CATEGOR Makes:Finolex/RRKabel/Polycab/Havells/KEI/ Gloster/
Y- I Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)

16 ELEC-1.6.4 CATEGOR Makes:V-Guard / Vihan/Vimal / CRI/

Y- II Lubi/Unicab/Hitech/ Spykaar/ Airson/Ollvin/ Laser/
Beljin/Rhino/Sudhakar/FortuneArrt/Unistar/DEC//LS
cable/ A-Flex/ Fybros/ Foursun/Vimcab/Nakoda
1.7 FLUSHTYPESWITCHESANDACCESSORIES
17 ELEC-1.7.1 …… Makes:GMGHome/GoldMedalOlive/MillionZoom
/GreatwhiteOmega/Koncept/Vimalopel/
Anchor/Vihan/CPL/ Havells Reo/Elleys
1.8 MODULARSWITCHESANDACCESSORIES
18 ELEC- CATEGOR Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/
1.8.1/1.8.3 Y- I Livia AB)/ Crabtree (Murano/Athena)/Lauritz
Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/
Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma
PLUS)/Precision(Series7)/Honeywell(Blenzepro)
19 ELEC- CATEGOR Makes: Legrand(Mylinc)/Crabtree Verona / Lauritz
1.8.2/1.8.4 Y- II Knudsen(FormerlyL&T)/HPL/SchneiderLivia/GM- (G
NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway
/ Logus Platina/ Panasonic Vision / Salzer S90series/
Precision( Series 5)/Koncept (Samrat/ Qura)/
/Polycab(Levana /IndoAsian/ Pointer/ CPL/Kolors/
Vihan/Hosper/
Vimal/DEC(Unicus)/Fybros/Infinity/Elleys(e-soft)
SECTION- 2
2.1 PANELMOUNTINGSWITCHDISCONNECTOR
FUSE UNITS ( SDFU )
20 ELEC-2.1.1 CATEGOR Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S
Y- I / ABB / SIEMENS
21 ELEC-2.1.2 CATEGOR Makes:Standard/Havells/HPL/IndoAsian/
Y- II Benlo/Anchor/BCH
2.2 ONLOADCHANGEOVERSWITCHES(OPEN
EXECUTION)
22 ELEC-2.2.1 CATEGOR Makes:Socomec/LauritzKnudsen(FormerlyL&T)/
Y- I HPL / Havells/ C&S
23 ELEC-2.2.2 CATEGOR Makes:ABB/GE/Siemens/IndoAsian/ Benlo/Standard
Y- II
2.3 OFFLOADCHANGEOVERSWITCHESINSS
ENCLOUSURE
24 ELEC-2.3.1 CATEGOR Makes:HPL/Havells/Standard/IndoAsian/C&S
Y- I
25 ELEC-2.3.2 CATEGOR Makes:Benlo/Million/GoldMedal/GM/Vimal
Y- II
ONLOADCHANGEOVERSWITCHESINSS
ENCLOUSURE
ELEC-2.3.3 CATEGOR Makes:HPL/Havells/Standard/IndoAsian/C&S

Page375of
 Y- I
ELEC-2.3.4 CATEGOR Makes: Benlo / Million / GoldMedal /GM/ Vimal
Y- II
2.4 AUTO TRANSFER SWITCH
26 ELEC-2.4.1 …… Makes: Socomec /Hager /ABB/ HPL/ Lauritz Knudsen
(Formerly L&T)/Havells
27 ELEC-2.4.2 …… Makes: Socomec ATysP/ ABB/L&T
2.5 REWIRABLE / DOUBLE BREAK SWITCHES IN SS
ENCLOSURE
28 ELEC-2.5.1 CATEGOR Makes: HPL / Havells / Standard / Indo Asian/Benlo
Y- I
29 ELEC-2.5.2 CATEGOR Makes: HPL / Havells / Standard / Indo Asian /Benlo
Y- I
30 ELEC-2.5.3 CATEGOR Makes:Anchor / GM / Million / Sputnik / Sigma / Gold
Y- II Medal / Star/Kundan cab/Anchor.
31 ELEC-2.5.4 CATEGOR Makes: Anchor / GM / Million / Sputnik / Sigma / Gold
Y- II Medal / Star/Kundan cab/Anchor.
2.6 HRC FUSE LINKS (DIN/BOLTED TYPE)
32 ELEC-2.6.1 …… Makes: Lauritz Knudsen (Formerly L&T)/ G E / C & S /
Standard / HPL / Havells / Siemens / Indo Asian
2.7 PORCELAIN REWIRABLE FUSE UNITS.
33 ELEC-2.7.1 …… Makes: C&S/Standard/HPL/ Sputnik / Million / Gold
Medal /GM/ Benlo/Anchor
34 ELEC-2.7.2 …… Makes: C&S/Standard/HPL/ Sputnik / Million / Gold
Medal / GM/Benlo/Anchor
2.8 VOLTAGE SURGE PROTECTORS
35 ELEC-2.8.1 …… Makes: Legrand / Siemens / G.E / Lauritz Knudsen
(Formerly L&T)/ Hager/Havells
2.9 PANEL MOUNTING MCCBs
36 ELEC-2.9.1 CATEGOR Makes: Lauritz Knudsen (Formerly L&T)- D shine /
Y- I Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens-
3VL / Hager-h3/C&S -Winbreak/HPL-Techno
37 ELEC-2.9.2 CATEGOR Makes: GE / ABB / Havells / Standard / Indo
Y- II Asian/BCH/
PANEL MOUNTING ACBs (Microprocessor Based)
38 ELEC-2.9.3 CATEGOR Makes: Siemens/ Lauritz Knudsen (Formerly L&T)/
Y- I Schneider /Legrand /C&S /HPL
39 ELEC-2.9.4 CATEGOR Makes:ABB / GE / Indo Asian / Havells/BCH
Y- II
AIR INSULATED BUS DUCT
40 ELEC-2.9.5 …… Makes: Legrand (Zucchini) / C&S/Advance-Anant
41 ELEC-2.9.6 …… Makes: Legrand (Zucchini) / C&S/Advance- Anant
42 ELEC-2.9.7 …… Makes: Legrand (Zucchini) / C&S /Advance-Anant
43 ELEC-2.9.8 …… Makes: Legrand (Zucchini) / C&S/Advance-Anant
SANDWITCH BUSDUCT
44 ELEC-2.9.9 …… Makes: Legrand (Zucchini) Lauritz Knudsen (Formerly
L&T)/ Schneider/C&S/Advance-Anant
45 ELEC-2.9.10 …… Makes: Legrand (Zucchini) / Lauritz Knudsen
(Formerly L&T)/ Schiender / C&S /Advance-Anant
46 ELEC-2.9.11 …… Makes: Legrand (Zucchini) / Lauritz Knudsen
(Formerly L&T)/ Schiender /C&S/Advance-Anant
47 ELEC-2.9.12 …… Makes: Legrand (Zucchini) / Schiender /C&S/Advance-
Page 376 of
8
 Anant
48 ELEC-2.9.13 …… Makes: Legrand (Zucchini) / Lauritz Knudsen
(Formerly L&T)/ Schiender /C&S/Advance- Anant
49 ELEC-2.9.14 …… Makes: Legrand (Zucchini) / Lauritz Knudsen
(Formerly L&T)/ Schiender /C&S/Advance-Anant
2.1 MCBs (AS PER IS:60898-1:2002)
50 ELEC-2.10.1 CATEGOR Makes: Legrand-DX3 / Schneider-A9/Hager-h3/
Y- I Siemens-5SX4/ Havells STADx / Lauritz Knudsen
(Formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno)
/Anchor (Uno Plus)
51 ELEC-2.10.2 CATEGOR Makes: ABB- S200/Standard / Havells-euro II / C&S /
Y- II Lauritz Knudsen (Formerly L&T)-Exora/ GM/Gold
Medal/ Salzer /Polycab/Million/Benlo/BCH
52 ELEC-2.10.3 CATEGOR Makes: Legrand RX3/Milltec/ Sputnik / Vimal
Y- III /Precision/Amron.
2.11 ISOLATORS CONFIRMS TO I E C 60947 PART-III
53 ELEC-2.11.1 CATEGOR Makes: Legrand-DX3 / Schneider-A9/Hager-h3/
Y- I Siemens-5SX4/ Havells STADx/ Lauritz Knudsen
(Formerly L&T)-AU/Indo Asian-Opti pro/HPL(Techno)/
Anchor (Uno Plus)
54 ELEC-2.11.2 CATEGOR Makes: ABB- S200/Standard / Havells-euro II / C&S /
Y- II Lauritz Knudsen (Formerly L&T)-Exora/ GM/Gold
Medal/ Salzer /Polycab/ Million/Benlo/BCH
55 ELEC-2.11.3 CATEGOR Makes: Legrand RX3/ Milltec / Sputnik / Vimal/
Y- III Precision/Amron.
2.12 RCCBs(ELCB/RCD) CONFIRMS TO IEC:61008 AND
IS:12640-1
56 ELEC-2.12.1 CATEGOR Makes: Legrand-DX3 / Schneider-A9/Hager-h3/
Y- I Siemens-5SX4/ Havells STADx/ Lauritz Knudsen
(Formerly L&T)-AU/Indo Asian-Opti pro/HPL(Techno)/
Anchor (Uno Plus)
57 ELEC-2.12.2 CATEGOR Makes: ABB- S200/Standard / Havells-euro II / C&S /
Y- II Lauritz Knudsen (Formerly L&T)-Exora/ GM/Gold
Medal/Salzer /Polycab/Benlo/BCH
RCBO CONFIRMS TO IEC:61009-1
58 ELEC-2.12.3 …… Makes: ABB- S200/Standard / Havells-euro II / HPL
(Techno) / C&S/ Lauritz Knudsen (Formerly L&T)-
Exora/ GM /Gold Medal/ Anchor/Salzer /Polycab/Benlo
2.13 MCB DISTRIBUTION BOARDS (AS PER IS 8623; IS
13032; IEC 61439-3)
59 ELEC-2.13.1 CATEGOR Makes: Legrand(Ekinox 3) / Schneider-A9/Hager -
Y- I Novello+/ Seimens/Havells STADx/ Lauritz Knudsen
(Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL
(Techno)/ Anchor (Uno Plus)
60 ELEC-2.13.2 CATEGOR Makes: ABB/Standard / Havells-euro II / C&S/ Lauritz
Y- II Knudsen (Formerly L&T) /GM /Gold Medal/
Salzer/Polycab/ Million/Benlo/BCH
61 ELEC-2.13.3 CATEGOR Makes:Milltec / Sputnik / Vimal/Precision/ Amron/.
Y- III
TPN DBs
62 ELEC-2.13.4 CATEGOR Makes: Legrand (Ekinox 3) / Schneider-A9/Hager -
Y- I Novello+/ Seimens/Havells STADx/ Lauritz Knudsen
Page 377 of
8
 (Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL
(Techno)/ Anchor (Uno Plus)
63 ELEC-2.13.5 CATEGOR Makes: ABB/Standard / Havells-euro II / C&S/ Lauritz
Y- II Knudsen (Formerly L&T) /GM /Gold Medal/ Salzer
/Polycab /Million/Benlo/BCH.
64 ELEC-2.13.6 CATEGOR Makes: Milltec / Vimal /Precision/Amron.
Y- III
VTPN DBs
65 ELEC-2.13.7 CATEGOR Makes: Legrand(Ekinox 3) / Schneider-A9/Hager -
Y- I Novello+/ Seimens/Havells STADx/ Lauritz Knudsen
(Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL
(Techno)/ Anchor (Uno Plus)
66 ELEC-2.13.8 CATEGOR Makes: Legrand(Ekinox 3) / Schneider-A9/Hager -
Y- I Novello+/ Seimens/Havells STADx/ Lauritz Knudsen
(Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL
(Techno)/ Anchor (Uno Plus).
67 ELEC-2.13.9 CATEGOR Makes: Legrand(Ekinox 3) / Schneider-A9/Hager -
Y- I Novello+/ Seimens/Havells STADx/ Lauritz Knudsen
(Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL
(Techno)/ Anchor (Uno Plus)
68 ELEC-2.13.10 CATEGOR Makes: ABB/Standard / Havells-euro II / C&S /
Y- II Lauritz Knudsen (Formerly L&T)/GM /Gold
Medal/Salzer/Benlo/BCH
69 ELEC-2.13.11 CATEGOR Makes: Siemens / ABB / Standard / Havells /Hager/
Y- II C&S/ Lauritz Knudsen (Formerly L&T)/ Benlo/BCH.
70 ELEC-2.13.12 CATEGOR Makes: ABB/Standard / Havells-euro II / C&S /
Y- II Lauritz Knudsen (Formerly L&T)/GM /Gold
Medal/Salzer/ Benlo/BCH.
71 ELEC-2.13.13 CATEGOR Makes: Legrand(Ekinox 3) / Schneider-A9/Hager -
Y- I Novello+/ Seimens/Crabtree Xpro classique-II/ Lauritz
Knudsen (Formerly L&T)-Newrange/Indo Asian-Opti
Pro/ HPL (Techno)/ Anchor (Uno Plus)
72 ELEC-2.13.14 CATEGOR Makes: ABB/Standard / Havells-euro II / C&S /
Y- II Lauritz Knudsen (Formerly L&T)GM /Gold Medal/
Salzer /Polycab /Million /Benlo/BCH.
73 ELEC-2.13.15 CATEGOR Makes: Milltec / Sputnik / Vimal/Amron
Y- III
74 ELEC-2.13.16 CATEGOR Makes: Legrand(Ekinox 3) / Schneider-A9/Hager -
Y- I Novello+/ Seimens/Havells STADx/ Lauritz Knudsen
(Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL
(Techno)/ Anchor (Uno Plus)
75 ELEC-2.13.17 CATEGOR Makes: Siemens / ABB / Standard / Havells / Hager/
Y- II C&S / Lauritz Knudsen (Formerly L&T)/ GM / Gold
Medal /Polycab/Million/Benlo/BCH.
76 ELEC-2.13.18 CATEGOR Makes: Milltec / Sputnik / Vimal/Amron.
Y- III
ELEC-2.14.1& Makes : Havells/Legrand/Hager /Schenider
ELEC-2.14.2
ELEC-2.15.1 Makes : Havells//Hager/Indo Asian /HPL /Million
SECTION - 3
3.1 STREET LIGHT LUMINAIRES
77 ELEC-3.1.1 CATEGOR Deleted

Page 378 of
8
 Y- I
78 ELEC-3.1.2 CATEGOR Deleted
Y-II
79 ELEC-3.1.3 CATEGOR Deleted
Y- I
80 ELEC-3.1.4 CATEGOR Deleted
Y- II
81 ELEC-3.1.5 CATEGOR Deleted
Y- I
82 ELEC-3.1.6 CATEGOR Deleted
Y- II
83 ELEC-3.1.7 …… Deleted
3.2 LED POST TOP LANTERN LUMINAIRES
84 ELEC-3.2.1 …… Makes: Crompton LPTO-40-CDL-M/ Bajaj Celesta
BGCL 40 W LED Wh/Wipro LP 02 or equivalent in
Phillips/Keselec/Havells Endura
Spring/Rhino(GPLP14)
85 ELEC-3.2.2 …… Make: Keselec MIRI or equivalent in Philips/Wipro
86 ELEC-3.2.3 …… Make: Keselec CAMBRIDGE/ or equivalent in
Philips/Wipro
87 ELEC-3.2.4 …… Makes: Crompton / Bajaj/
Wipro/Phillips/Keselec/Havells
3.3 ACCESSORIES FOR MV / SV / MH LUMINAIRES
COPPER BALLASTS
88 ELEC-3.3.1 …… Deleted
89 ELEC-3.3.2 …… Deleted
90 ELEC-3.3.3 …… Deleted
91 ELEC-3.3.4 …… Deleted
3.4 LAMPS
92 ELEC-3.4.1 CATEGOR Deleted.
Y- I
93 ELEC-3.4.2 CATEGOR Deleted
Y- II
3.5 AUTOMATIC STREET LIGHT CONTROL SYSTEMS
94 ELEC-3.5.1 …… Make: Nature Switch / Lightmate/ GL/Bajaj/Schnell
95 ELEC-3.5.2 a - …… Make: Nature Switch / Light Mate /GL/Bajaj/Schnell
e
96 ELEC-3.5.3 a - …… Makes :Super tech ( Light Mate )/ L&T / Siemens /
c Bajaj/Schnell
3.6 INTERNAL LUMINAIRES
97 ELEC-3.6.1 …….. Deleted
98 ELEC-3.6.2 ……. Deleted
99 ELEC-3.6.3 …… Deleted
100 ELEC-3.6.4 …… Deleted
101 ELEC-3.6.5 …… Deleted
102 ELEC-3.6.6 …… Deleted
103 ELEC-3.6.7 …… Deleted
104 ELEC-3.6.8 …… Deleted
105 ELEC-3.6.9 …… Deleted
106 ELEC-3.6.10 …… Deleted
107 ELEC-3.6.11 …… Deleted

Page 379 of
8
 3.7 FLOURSCENT TUBES / CFL LAMPS / LED BULBS
108 ELEC-3.7.1 …… Deleted
109 ELEC-3.7.2 …… Deleted
110 ELEC-3.7.3 …… Deleted
111 ELEC-3.7.4 …… Deleted
LED BULBS
112 ELEC-3.7.5 …… . Makes: Phillips /Crompton / Bajaj / Havells /
Halonix/GM/HPLSyska / Green Lites / Fortune Arrt /
GoldMedal / Luker/Leo/Orbit /Rhino / GLO
LED/Million/Victoria/Benlo/Goldwyn
113 ELEC-3.7.6 …… Makes: Phillips /Crompton / Bajaj / Havells /
Halonix/GM/HPLSyska / Green Lites / Fortune Arrt /
GoldMedal
/ Luker/Leo/Orbit/Rhino /GLO LED
114 ELEC-3.7.7 …… Makes: Philips/Bajaj / Crompton / Havells/ HPL.
3.8 LED LUMINAIRES INDOOR
DOWN LIGHTERS
115 ELEC-3.8.1 CATEGOR a) LUMINAIRE MAKE : Phillips / GE-Venture /
Y- I Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b)
LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG/Everlight
116 ELEC-3.8.2 CATEGOR Makes: Surya /C&S / Syska / Enrich / Stanjo /
Y- II Polycab/ Ib LED/ Opple/R LED/Luker/ Orbit/Trinic /
GLO LED /Vimal/Benlo/Goldwyn/Lumirise
b) LED MAKE : CREE / NICHIA / OSRAM /
SAMSUNG / EVERLIGHT
117 ELEC-3.8.3 CATEGOR a) LUMINAIRE MAKE : Pasolite / Cosmo / Siger/
Y- III Koncept/
Kiran/Vibrant/Leo/Lumens/Ilite/Akarui/Million/Fybros
/Victoria/RK
b) LED MAKE : CREE / NICHIA / OSRAM /
SAMSUNG / EVERLIGHT
LED PANEL LIGHTS
118 ELEC-3.8.4 CATEGOR a) LUMINAIRE MAKE : Phillips / GE- Venture /
Y- I Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b)
LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG/Everlight.
119 ELEC-3.8.5 CATEGOR Makes: Surya /C&S / Syska / Enrich / Stanjo /
Y- II Polycab/ Ib LED/ Opple/ Luker/ Orbit/Trinic/Lumens/
GLO LED/ Vimal/Benlo/Goldwyn/ Lumirise
b) LED MAKE : CREE / NICHIA / OSRAM /
SAMSUNG / EVERLIGHT
120 ELEC-3.8.6 a CATEGOR a) LUMINAIRE MAKE : Pasolite / Cosmo / Siger/
to f Y- III Koncept/ Kiran/Vibrant/Leo/Ilite/Akarui/Million/Fybros
/Victoria/RK
b) LED MAKE : CREE / NICHIA / OSRAM /
SAMSUNG / EVERLIGHT/ San'an

Page 380 of
8
 COB DOWN LIGHTS
121 ELEC-3.8.7 CATEGOR a) LUMINAIRE MAKE : Phillips / GE-Venture /
Y- I Crompton / Wipro / Bajaj
/ Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal /Eveready/ FortuneArrt// Rhino/Panasonic
b) LED MAKE : Bridge Lux / LUMILEDS / CREE /
NICHIA / Epistar/ Sunpo/Samsung
122 ELEC-3.8.8 CATEGOR Makes: Surya /C&S / Syska / Enrich / Stanjo /
Y- II Polycab/ Ib LED/ Opple/Luker/ Orbit/ Trinic/Lumens
/GLO LED /Vimal/Akarui
/Million/Fybros/Victoria/Benlo/Goldwyn/ Lumirise
b) LED MAKE : Bridge Lux / LUMILEDS / CREE /
NICHIA / Epistar/ Sunpo/Samsung
SPOT LIGHTS / WALL WASHERS
123 ELEC-3.8.9 CATEGOR a) LUMINAIRE MAKE : Phillips / GE-Venture /
Y- I Crompton / Wipro / Bajaj/ Havells /
Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal/Eveready/ FortuneArrt/Panasonic
b) LED MAKE : Bridge Lux / LUMILEDS / CREE /
NICHIA / Epistar/ Sunpo
124 ELEC-3.8.10 CATEGOR Makes: Surya /C&S / Syska / Enrich / Stanjo /
Y- II Polycab/ Ib LED/ Opple/R LED/Luker/ Orbit/Trinic
/Akarui/Lumirise
b) LED MAKE : Bridge Lux / LUMILEDS / CREE /
NICHIA / SAMSUNG/ Sunpo
125 ELEC-3.8.11 CATEGOR a) LUMINAIRE MAKE : Phillips / GE- Venture /
Y- I Crompton / Wipro / Bajaj / Havells / Halonix/
GreenLites /HPL
/Eveready/ FortuneArrt
b) LED MAKE :Bridge Lux / LUMILEDS / CREE /
NICHIA / Epistar.
126 ELEC-3.8.12 CATEGOR Makes: Surya / Polycab/ Opple /Luker/
Y- II Orbit/Akarui
b) LED MAKE : Bridge Lux/ CREE / NICHIA / Epistar
LED BATTENs AND 2' x 2' LUMINARIES
127 ELEC-3.8.13 CATEGOR a) LUMINAIRE MAKE : Phillips / GE- Venture /
Y- I Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal/Eveready// Rhino/Panasonic
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG/ Everlight.
128 ELEC-3.8.14 CATEGOR Makes: Surya /C&S/ Fortune Arrt / Syska / Enrich /
Y- II Stanjo / Polycab/ Ib LED/ Opple/ Luker/ Orbit/
Trinic/Lumens/ GLO LED / Vimal/Benlo/Goldwyn
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG / EVERLIGHT
129 ELEC-3.8.15 CATEGOR a) LUMINAIRE MAKE : Pasolite / Cosmo / Siger/
Y- III Koncept/ Kiran /Vibrant /Leo /ilite /Akarui /Million
/Fybros /Victoria/RK
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG / EVERLIGHT

Page 381 of
8
130 ELEC-3.8.16 CATEGOR a) LUMINAIRE MAKE : Phillips / GE- Venture /
Y- I Crompton / Wipro / Bajaj / Havells /
Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal/Eveready// Rhino/Panasonic
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG.
131 ELEC-3.8.17 CATEGOR Makes: Surya /C&S/ Fortune Arrt / Syska / Enrich /
Y- II Stanjo / Polycab/ Ib LED/ Opple/ Luker/ Orbit/
Trinic/Lumens/ilite/ GLO LED/ Vimal
/Akarui/Million/Fybros/Victoria/Benlo/Goldwyn
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG / EVERLIGHT
132 ELEC-3.8.18 …… Makes: Phillips / Crompton / Bajaj/Surya/Havells/HPL
133 ELEC-3.8.19 …… Makes: Greenlites / Fortune Arrt / Capart / GM
/ Goldmedal /Trinic/Kiran.
134 ELEC-3.8.20 CATEGOR a) LUMINAIRE MAKE : Phillips / GE-Venture /
Y- I Crompton / Wipro / Bajaj
/ Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold
Medal/Eveready / FortuneArrt// Rhino/Panasonic
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG/Everlight.
135 ELEC-3.8.21 CATEGOR Makes: Surya /C&S / Syska / Enrich / Stanjo /
Y- II Polycab/ Ib LED/ Opple/ Luker/ Orbit/Trinic/ilite/GLO
LED/ Vimal/Akarui/ Million /Fybros /Victoria /Benlo
/Goldwyn
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG / EVERLIGHT.
136 ELEC-3.8.22 …… Makes: Philips/Bajaj/ Crompton / Surya / Havells /
Greenlites/ Insta Power/HPL /Halonix/ Panasonic. /
FortuneArrt
137 ELEC-3.8.22 …… a) LUMINAIRE MAKE : Phillips (Pureline Slim) / GE-
Venture / Crompton / Wipro / Bajaj / Havells (Dustello)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG/LG
138 ELEC-3.8.23 CATEGOR a) LUMINAIRE MAKE : Wipro(Skyline) / Philips
Y- I (Green line) / GE-Venture / Crompton(Neo Series) /
Bajaj (Edge) / Halonix(Lumos - Super) / Havells
(Endura Series) /Capart(Premium)/Greenlites(Hi-Lux)
/Polycab/Keselec/ HPL(City Vision)/
Jaquar(Premium)/Eveready/ Surya (Pollux) /
FortuneArrt (Leaf) / Rhino(GPSL04)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG / LG
139 ELEC-3.8.24 CATEGOR a) Luminaire Make : Wipro(Skyline) / Philips
Y- I (Greenline Extra) / GE- Venture / Crompton(Nexus
/ Hawk series) / Bajaj (Edge) / Halonix (Modular/
Lumos-Super) / Havells (Endura Series)/Greenlites(HI-
Lux) /Capart(Premium)/Polycab/Keselec / HPL(City
Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) /
Fortune Arrt (Leaf) / Rhino(GPSL06)
b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG.

Page 382 of
8
140 ELEC-3.8.25 CATEGOR a) LUMINAIRE Makes: Syska / GM / C&S/ VIN/Gold
Y- II Medal /Pharox / Cosmo / Enrich/Pro-lite(I) / Renesola /
Stanjo / Goldwyn/ Ib LED/ Orbit/ Luker/Trinic/ GLO
LED/ Vimal/Transrail/Valmont/Benlo/Goldwyn/Orient/
Lumirise.
b) LED MAKE : CREE / NICHIA / OSRAM /
SAMSUNG / LG.
141 ELEC-3.8.26 CATEGOR a) LUMINAIRE Makes: Trinic / Pasolite /
Y- III Sieger/Koncept/Vibrant/Leo/Lumens/Ilite/Akarui/Million
/Fybros/SNKS-NLight/Victoria/Foursun/RK
b) LED MAKE : CREE / NICHIA / OSRAM /
SAMSUNG / LG.
FLOOD LIGHTS
142 ELEC-3.8.27 CATEGOR a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /
Y- I Crompton/ Bajaj/Greenlites / Havells/Capart(Premium)
/Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready /
Surya (Livia Pro) / FortuneArrt (Fin)/ Rhino(GPFL02
Series)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG.
143 ELEC-3.8.28 CATEGOR a) LUMINAIRE Makes: Pharox / GM / Goldmedal /
Y- II Syska / C&S/Cosmo/ Ib LED/ Vibrant/ Stanjo/Enrich/
Orbit/Luker/Trinic/Pro- lite/Ilite/GLO LED
/Vimal/Akarui/Million/Fybros/Transrail/Valmont/Victoria
/Benlo/Goldwyn/Orient/ Lumirise.
b) LED MAKE : CREE / NICHIA / OSRAM /
SAMSUNG / LG
HIGH BAY LIGHTS
144 ELEC-3.8.29 CATEGOR a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /
Y- I Crompton/ Bajaj
/Greenlites / Havells/Capart(Premium)
/Halonix/Polycab/Keselec/ HPL/ Jaquar/Eveready /
Surya (ORION-II)/ FortuneArrt (UFO-S)
/Rhino(GPHB02 Series)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG .
145 ELEC-3.8.30 CATEGOR a) LUMINAIRE Makes: Pharox / GM / Goldmedal /
Y- II Syska / C&S/Cosmo/ Ib LED/ Vibrant/
Stanjo/Enrich/Orbit/Luker/Trinic/Ilite/GLO
LED/Akarui/Victoria/Benlo/Goldwyn
b) LED MAKE : CREE / NICHIA / OSRAM /
SAMSUNG.
146 ELEC-3.8.31 …… UMINAIRE MAKE : Wipro / Philips/ GE / Crompton/
Bajaj / Greenlites/ Havells/ FortuneArrt
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG/Seoul .
RGB/RGBW LED Lighting
147 ELEC-3.8.32 …… LUMINAIRE MAKE : Wipro / Philips/ Crompton/ Bajaj
/ Greenlites/ Havells/ FortuneArrt
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG/Seoul .

Page 383 of
8
148 ELEC-3.8.33 …… a) LUMINAIRE MAKE : Wipro / Philips/ GE /
Crompton/ Bajaj / Greenlites/ Havells/ FortuneArrt
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA
/ OSRAM / SAMSUNG /SEOUL.
149 ELEC-3.8.34 …… Make: Sunlite Suit2/Artnet or its equivalent
150 ELEC-3.8.35 …… Makes:colourdreamer/ AURA/Greenlites
151 ELEC-3.8.36 …… Makes:colourdreamer/ AURA/Greenlites
152 ELEC-3.8.37 …… Makes:colourdreamer/ AURA/Greenlites
153 ELEC-3.8.38 …… Makes:Mean Well or its equivalent
154 ELEC-3.8.39 …… Makes:Mean Well or its equivalent
LED DRIVERS
155 ELEC-3.8.40 …… Makes: Philips /Crompton / Bajaj/
Havells/Surya/Greenlites/HPL/Halonix/Jaquar/Ib
LED/Promtec/Eveready.
156 ELEC-3.8.41 …… Makes: Philips /Crompton / Bajaj/
Havells/Surya/Greenlites/HPL/Halonix/Jaquar/Ib
LED/Promtec/Eveready/Stanjo/ Pro-Lite.
SECTION - 4
4.1 U.G. CABLES
157 ELEC-4.1.1 CATEGOR Makes: Torent / Universal / Unicab / Havells / Finecab
Y- I / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt
158 ELEC - 4.1.2 CATEGOR Makes: RPG / Finolex / Paragon / V-Guard / Suncab /
Y- II Delton / Payal / Gemscab/ OrbitAvocab /Laser /Rhino
/Pawancab/AKG/LS cable/Polywires/Nakoda.
33 KV HT XLPE CABLES
159 ELEC-4.1.3 …… Make: Torrent / Universal / Unicab / Havells / KEI
/Polycab/Gloster/RR Kabel/RPG
11 KV HT XLPE CABLES
160 ELEC- 4.1.4 …… Make: Torrent / Universal / Unicab / Havells / KEI
/Polycab/Gloster/RR Kabel/RPG
Un Armoured and Armoured Copper Control
Cables
161 ELEC-4.1.5 …… Make: Torrent / Universal / Unicab / Havells / KEI
/Polycab/Gloster /orbit/ Paragon / RR Kabel/
RPG/Pawancab/AKG/LS cable/Polywires
162 ELEC-4.1.5 A ……… Makes: Torent / Universal / Unicab / Havells / KEI /
Gloster/Finecab / Polycab /RR Kabel/ Polywires
163 ELEC-4.1.5 B ……….. Makes: RPG / Finolex / Paragon / V-Guard / Fortune
Arrt / Suncab / Delton / Payal / Gemscab/
Orbit/Avocab/Laser/Rhino.
164 ELEC-4.1.5C ………… Makes:- Finolex/RR kabel/ Havells/ KEI/ Polycab/
Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor.
165 ELEC-4.1.6 …… Make: Torrent / Universal / Unicab / Havells / KEI
/Polycab/Gloster/Orbit/ Paragon/RR Kabel /RPG
/Rhino /Pawancab/AKG/LS cable/ Polywires
CABLE TERMINATIONS AND ACCESSORIES
166 ELEC-4.1.7 …… Makes: Raychem /M seal/ Denson/ Multy/ Transeal-
Hongshang
167 ELEC-4.1.8 …… Makes: Raychem /M seal/ Denson/ Multy/ Transeal-
Hongshang
168 ELEC-4.1.9 …… Makes: Raychem /M seal/ Denson/ Multy/ Transeal-
Hongshang
Page 384 of
8
169 ELEC-4.1.10 …… Makes:Dowels/Comet/SMI
170 ELEC-4.1.11 …… .Makes:Dowels/Comet/SMI
171 ELEC-4.1.12 …… Makes:Dowels/Jainson/Comet
172 ELEC-4.1.13 …… Makes:Dowels/Jainson/Comet
4.3 DOUBLE WALLED CORRUGATED HDPE PIPE
173 ELEC-4.3.1 a- …… Makes: DURA LINE (Dura Guard)/Precision/CPE or
h any ISI approved make having ISI mark.
SECTION - 5
5.1 FANS
174 ELEC-5.1.1 …… Makes: Atomberg(GV2 )/ Halonix(Plasma)
/Havells(Efficiencia Neo)/ Crompton(EN
Groove)/Superfan(E281)/RJP(Ecowise)
175 ELEC-5.1.2 …… Makes: Atomberg(GV2 )/ Halonix(Plasma)
/Havells(Efficiencia Neo)
176 ELEC-5.1.3 …… Makes: Crompton (HS Plus/HS) / Havells (ES
PLUS/SS390ES) /Orient Energy Star/
Halonix(Zephyr)/Polycab(Synergy 50 ISI) / G.M. (Air
Wave Premium)/Bajaj-Edge/Arcline (Glacier).
177 ELEC-5.1.4 …… Makes: Crompton (HS Decora/Aura) / Bajaj Regal Star
/ Havells Festiva / Orient Ornamental
Shine/Halonix(Halo) /Polycab(Elanza)/G.M. (G-
Storm)/Goldmedal(Orchid)/RJP(Aroma Super)
178 ELEC-5.1.5 …… Makes: Crompton HS / Havells Velocity ES 50/Orient
Summer Breeze Pro/Halonix(Zephyr)
/Polycab(Synergy 50 ISI) / Arcline (Glacier).
179 ELEC-5.1.6 …… Makes: Crompton Wind Flo / Bajaj Elite / Havells
Swing / Orient Wall 50/Halonix Krypton/G.M. (Bolt)/
Goldmedal(Nora-16)
180 ELEC-5.1.7 …… Makes: Crompton Wind Flo / Bajaj Spectrum / Havells
Swing / Orient Stand 37/Halonix Krypton/Polycab /
G.M. (Bolt)/Goldmedal(Nora-16)
181 ELEC-5.1.8 …… Makes: Crompton / Havells Turbo Force / Orient
Tornado II / Almounard/Halonix Turbon/Polycab./ G.M.
(Air-Burst)/Goldmedal(Toofan)
182 ELEC-5.1.9 …… Makes: Crompton / Havells Turbo Force /
Almounard/Halonix
183 ELEC-5.1.10 …… Makes: Crompton / Havells ciera / Orient Wall
11/Halonix
184 ELEC-5.1.11 …… Makes: Crompton / Bajaj Bahar WG / Havells Ventil
Air-DSP / Orient hill air/Halonix /Polycab/G.M.
(Xenix)/Goldmedal (Rapido-12)
185 ELEC-5.1.12 …… Makes: Crompton / Bajaj Bahar WG / Havells Ventil
Air-DSP / Orient hill air/Halonix /Polycab/ G.M.
(Xenix)/Goldmedal (Rapido-9)
186 ELEC-5.1.13 …… Makes: Crompton / Almounard / Havells Ventil Air-DB
187 ELEC-5.1.14 …… Makes: Crompton / Almounard / Havells Turbo
Force/Halonix Krypton
188 ELEC-5.1.15 …… Makes: Crompton / Almounard / Havells Turbo
Force/Halonix Krypton
ELEC-5.1.16 Makes: Crompton / Bajaj Bahar / Havells Ventil Air-LX
/ Orient hill air/Halonix /Polycab/G.M. (Eco
Air)/Goldmedal (Rapido-12)
Page 385 of
8
 ELEC-5.1.17 Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air
LX/ Orient hill air/Halonix /Polycab/G.M. (Eco
Air)/Goldmedal (Rapido-12)
ELEC-5.1.18 Makes: Atomberg/ Halonix/Havells/ Crompton
5.2 WATER HEATERS (Conventional & Solar)
189 ELEC-5.2.1 …… Makes: Prevailing models of Crompton/ Jaquar /
Venus / Racold / AO Smith /Havells /Warmex makes
and shall be confirming to SOR specifications
190 ELEC-5.2.2 …… Make:TATA / BHEL/ BOSCH/ ETC/V-GUARD
/RACOLD
191 ELEC-5.2.3 …… Make:TATA / BHEL/ BOSCH/ ETC/V-GUARD
/RACOLD
192 ELEC-5.2.4 …… Make:Jaquar/AO Smith/Voltex/Racold /Rheem
193 ELEC-5.2.5 …… Make:Jaquar/AO Smith/Voltex/Racold /Rheem
5.4 PUMPSETS
SINGLE PHASE SUBMERSIBLE MOTOR PUMP
SETS
194 ELEC-5.4.1 CATEGOR Makes: Kirloskar / Crompton / Texmo / CRI /
Y- I KSB/Lubi/ PSG/ARYEN VARSHA/ Falcon/Prithvi.
195 ELEC-5.4.2 CATEGOR Makes: Pluga / Sterling / Kumar / Unnati
Y- II zen/Duke/Lada/Ellen/
Suguna/UNItek/KSP(Karunya)/Anco/Sabar/Fitwell/Dec
can/Karvel / SILVER
THREE PHASE SUBMERSIBLE MOTOR PUMP
SETS.
196 ELEC-5.4.3 CATEGOR Makes: Kirloskar / Crompton / Texmo / CRI /
Y- I KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi
197 ELEC-5.4.4 CATEGOR Makes: Pluga / U-Neel / Sterling / Kumar / Unnati
Y- II zen/Duke/Lada/Ellen/ Suguna/ UNItek/KSP(Karunya)/
Anco/ Sabar/ Fitwell/Deccan/Karvel/ SILVER
198 ELEC-5.4.5 CATEGOR Makes: Kirloskar / Crompton / Texmo / CRI /
Y- I KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi
199 ELEC-5.4.6 CATEGOR Makes: Pluga / U-Neel / Sterling /Kumar / Unnati
Y- II zen/Duke/Lada/Ellen/ Suguna/UNItek /KSP (Karunya)
/Anco/ Sabar/Fitwell/Polycab/Deccan/Karvel/ SILVER
SINGLE PHASE OPEN WELL SUBMERSIBLE
MOTOR PUMP SETS
200 ELEC-5.4.7 CATEGOR Makes: Kirloskar / Crompton / Texmo / CRI /
Y- I KSB/Lubi/PSG/ ARYEN VARSHA /Falcon/Prithvi
201 ELEC-5.4.8 CATEGOR Makes: Pluga / U-Neel / Sterling / Kumar / Unnati
Y- II zen/Duke/LDK/Ellen/ Suguna/UNItek /KSP (Karunya) /
Anco/ Sabar/Fitwell/Deccan/Karvel/ SILVER
THREE PHASE OPEN WELL SUBMERSIBLE PUMP
SETS
202 ELEC-5.4.9 CATEGOR Makes: Kirloskar / Crompton / Texmo / CRI /
Y- I KSB/Lubi /PSG/ ARYEN VARSHA /Falcon/Prithvi
203 ELEC-5.4.10 CATEGOR Makes: Pluga / U-Neel / Sterling / Kumar / Unnati
Y- II zen/Duke/LDK/Ellen/ Suguna/UNItek/ KSP(Karunya)
/Polycab/ Anco/ Sabar /Fitwell/Deccan/Karvel/ SILVER
SINGLE PHASE MONO BLOCK MOTOR PUMP
SETS.

Page 386 of
8
204 ELEC-5.4.11 CATEGOR Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi
Y- I / Havells Hi-flow V2 / PSG/ ARYEN VARSHA /Falcon
205 ELEC-5.4.12 CATEGOR Makes: Pluga / U-Neel / Sterling /Kumar / Unnati
Y- II zen/Ellen/LDK/Suguna/ UNItek/Polycab/Anco/
Sabar/Fitwell/Deccan/Karvel / SILVER
206 ELEC-5.4.13 CATEGOR Makes: Kirloskar / Crompton / Texmo / CRI / KSB
Y- I /Lubi/ ARYEN VARSHA /Falcon
207 ELEC-5.4.14 CATEGOR Makes: Pluga / U-Neel / Sterling /Kumar / Unnati
Y- II zen/Ellen/LDK/Suguna/ UNItek/Polycab/Anco/
Sabar/Fitwell/Deccan/Karvel/ SILVER
CONTROL PANEL BOARD FOR MOTOR
PUMPSETS
208 ELEC-5.4.15 …… make C&S/LTLK/ Seimens/ BCH/KSP(Karunya)/
Crompton. complete.,
209 ELEC-5.4.16 …… make C&S/LTLK/Seimens/BCH
/KSP(Karunya) /Crompton. complete.,.
210 ELEC-5.4.17 …… Voltmeter ;. Makes: L&T / C&S / SALZAR / HPL/ AEI /
Meco / Rishab
Ammeter Makes: L&T / C&S / SALZAR / HPL/ AEI /
Meco / Rishab
Single phase preventor Makes: L&T / Minilec /
Powertec.
32 A TP, 10KA MCB. Makes: Legrand / Schneider
capacitor Makes: L&T / Siemens / Schneider /
Epcos/Havells.
a …… Make C&S.Crompton / L&T /KSP/ Siemens/BCH.
b …… Make C&S/Crompton / L&T / Siemens/BCH.
c …… Make C&S/Crompton / L&T / Siemens/BCH.
211 ELEC-5.4.18 …… Makes: Siemens / Crompton / L&T (MF1)
212 ELEC-5.4.19 …… Makes: Siemens / Crompton / L&T (MK2 DOL).
213 ELEC-5.4.20 …… Makes: Siemens / Crompton / L&T (MU1 DOL)
UPVC PIPES AND FITTINGS
214 ELEC-5.4.21 …… Makes: Ashirvad / Finolex / Waterflo
/Sudhakar/Precision.
215 ELEC-5.4.27 …… Makes: Ashirvad / Finolex / Waterflo
216 ELEC-5.4.28 …… Makes: Ashirvad / Finolex / Waterflo / Apollo
5.1 AIR CONDITIONERS

ELEC-5.5.1 1.5TR Split ACs

a CATEGOR Deleted
Y- I
b CATEGOR Deleted
Y- II
2.0 TR Split Acs
c CATEGOR Deleted
Y- I
d CATEGOR Deleted
Y- II
Inverter Split AC Unts (Cooling Only)
217 ELEC-5.5.1 A 1.5TR Split ACs
a CATEGOR Makes: Mitsubishi / O General /Toshiba (prevailing
Y- I models in the market)
Page 387 of
8
 b CATEGOR Makes: Blue Star / Daikin / Hitachi / Voltas / Carrier
Y- II /LG/Lloyd (prevailing models in the market)
2.0 TR Split Acs
c CATEGOR Makes: Mitsubishi / O General / Toshiba (prevailing
Y- I models in the market)
d CATEGOR Makes: / Hitachi / Blue Star / Daikin / Voltas /Carrier/
Y- II LG/Lloyd (prevailing models in the market)

218 ELEC-5.5.2 0.8/ 1.0TR Split Acs

a CATEGOR Makes: Mitsubishi / O General / Toshiba (prevailing
Y- I models in the market)
b CATEGOR Makes: Blue star /Carrier /Hitachi/Daikin/ LG /Lloyd
Y- II (prevailing models in the market)
c CATEGOR Makes: Mitsubishi / O General / Toshiba (prevailing
Y- I models in the market)
d CATEGOR Makes: Blue Star / Carrier / Hitachi / Daikin/ LG /Lloyd
Y- II (prevailing models in the market)
1.5, 1.8 & 2.0TR Split Acs
e CATEGOR Makes: Mitsubishi / O General /Toshiba (prevailing
Y- I models in the market)
f CATEGOR Makes: / Blue Star / Daikin / Hitachi/Carrier / LG/Lloyd
Y- II (prevailing models in the market)
g CATEGOR Makes: Mitsubishi / O General /Toshiba (prevailing
Y- I models in the market)
h CATEGOR Makes: Blue star / Hitachi / Daikin/Lloyd (prevailing
Y- II models in the market)
i CATEGOR Makes: Mitsubishi /O General /Toshiba (prevailing
Y- I models in the market)
j CATEGOR Deleted
Y- II
INVERTER CASSETTE TYPE AC UNITS
219 ELEC-5.5.35
a CATEGOR Makes: Mitsubishi PLY- SP18EA / Toshiba RAV-
Y- I SE561UP / O General.
b CATEGOR Makes: Mitsubishi PLY- SP24EA / O General
Y- I AUGA25FRTA-B / Toshiba RAV-SE801UP
c CATEGOR Makes: Blue Star3HNCS24YAF/ Daikin / Carrier/ LG
Y- II
d CATEGOR Makes: Mitsubishi PLY- SP42EA / O General /Toshiba
Y- I
e CATEGOR Makes: Daikin / Bluestar / Carrier
Y- II
f CATEGOR Makes: Mitsubishi PLY-SP48EA / O General / Toshiba
Y- I RAV- SE1251UP
g CATEGOR Makes: Blue Star / Carrier / Daikin/LG
Y- II
TOWER MODEL (Vertical) TYPE AC UNITS
220 ELEC-5.5.36
a …… Makes: Carrier /Daikin / Blue Star
b …… Makes: Carrier /Daikin / Blue Star
c …… Makes: Carrier /Daikin / Blue Star
HVAC SYSTEMS(VRV/VRF)
Page 388 of
8
221 ELEC-5.6.1 CATEGOR Makes: Mitsubishi /DAIKIN/Toshiba/O General
Y- I
222 ELEC-5.6.2 CATEGOR Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung
Y- II
223 ELEC-5.6.6 CATEGOR Makes: Mitsubishi /DAIKIN/Toshiba/ O General
Y- I
224 ELEC-5.6.7 CATEGOR Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung
Y- II
225 ELEC-5.6.8 CATEGOR Makes: Mitsubishi /DAIKIN/Toshiba /O General
Y- I
226 ELEC-5.6.9 CATEGOR Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung
Y- II
227 ELEC-5.6.10 CATEGOR Makes: Mitsubishi /DAIKIN/Toshiba/ O General
Y- I
228 ELEC-5.6.11 CATEGOR Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung
Y- II
229 ELEC-5.6.13 CATEGOR Makes: Mitsubishi /DAIKIN/Toshiba/ O General
Y- I
230 ELEC-5.6.14 CATEGOR Makes: LG/Voltas/Blue star/Hitachi/Carrier/Samsung
Y- II
Refrigerant Piping
231 5.6.20 …… Makes:Totaline/Mandav/Mexico
232 ELEC-5.6.25 …… Makes:TATA/Jindal
5.7 EVAPORATIVE AIR COOLING SYSTEM
233 ELEC-5.7.1 …… Makes: Cool Breeze / Breeze Air
234 ELEC-5.7.2 …… Makes: Cool Breeze/Breeze Air

STABILIZERS
235 ELEC-5.8.1 CATEGOR Makes: V-Guard / Real Guard / Uni Stab / ITL.
Y- I
236 ELEC-5.8.2 CATEGOR Makes: Keeline / Soft Line
Y- II
5.9 REPAIRING OF FANS, COOLERS, PUMPS,
MOTORS, FRIDGES AND AIRCONDITIONERS
237 ELEC-5.9.16 …… Makes:Carrier/ Kirlosker/ Techam-Shah/ Shriram/
Voltas
238 ELEC-5.9.17 …… Makes: DAIKIN/LG/Carrier/Kirloskar/Techam-shah
239 ELEC-5.9.25 …… Make: Copper:Totaline /Nippon /Mandev/Nitrile
Insulation: Kflex/ Totaline /Armaflex
240 ELEC-5.9.26 …… Makes: Crompton / AU.
241 ELEC-5.9.38 ……. Makes: Mitsubishi /DAIKIN/Toshiba/O General/
LG/Voltas/Blue star/Hitachi/Carrier/Samsung
242 ELEC-5.10.1 ……. Makes:- 1. FAN – KRUGER / ZIEHL-ABEGG
2. MOTORS – ABB/SIEMENS/BBL
3. FILTERS – CAMFIL/THERMADYNE
4. VFD DRIVE - DANFOSS / ABB
5. AHU - EDGE TECH / ZRCO/ CITIZEN/
BOOPATHY
243 ELEC-5.10.2- Makes:- Crystal Air/Kruger/ System Air/ Carry Air/
5.10.7 Edgetech/ Greenheck/ Aerotech
244 ELEC-5.10.8 Make : Dyna / American Air Filter / M.K Precesion
SECTION 6
Page 389 of
8
 6.1 SWAGED / OCTAGONAL POLES AND GARDEN
POSTS
OCTOGONAL POLEs
245 ELEC-6.1.4 …… Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/ Skipper /Consoul /Surya
/Vakrangee/Lysaght Pole
246 ELEC-6.1.5 …… Makes: Bajaj / Valmont/Laasma
/Transrail/Utkarsh/
Skipper/Consoul/Surya/Vakrangee/Lysaght Pole
247 ELEC-6.1.6 …… Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/
Skipper/Consoul/Surya/Vakrangee/Lysaght Pole
248 ELEC-6.1.7 …… Makes: Bajaj / Valmont/Laasma//Transrail/Utkarsh/
Skipper/Consoul/Surya/Vakrangee/Lysaght Pole
DECORATIVE DRAGON TYPE BRACKET WITH
POLE
249 ELEC-6.1.8 …… Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/
Skipper/Consoul/Surya/Vakrangee/Lysaght Pole
250 ELEC-6.1.10 …… Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/
Skipper/Consoul/Surya/Vakrangee/Lysaght Pole
POLE BRACKETS
251 ELEC-6.1.11 …… Deleted
252 ELEC-6.1.12 …… Deleted
253 ELEC-6.1.13 …… Deleted
254 ELEC-6.1.14 …… Deleted
255 ELEC-6.1.15 …… Deleted
256 ELEC-6.1.16 …… Deleted
257 ELEC-6.1.17 …… Deleted
258 ELEC-6.1.18 …… Deleted
259 ELEC-6.1.19 …… Deleted
260 ELEC-6.1.20 …… Deleted
HIGH MAST POLES
261 ELEC-6.1.21 …… Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/
Skipper/Consoul/Surya/Vakrangee/Lysaght Mast
262 ELEC-6.1.22 …… Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/
Skipper/Consoul/Surya/Vakrangee/Lysaght Mast
263 ELEC-6.1.23 …… Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/
Skipper/Consoul/Surya/Vakrangee/Lysaght Mast
FEEDER PILLAR BOXES
264 ELEC-6.1.24 …… FP MCBmake :Legrand / Schnieder / L&T
265 ELEC-6.1.25 …… FP MCBmake :Legrand / Schnieder / L&T
ERRECTION- HIGH MAST POLES
266 ELEC-6.1.29 …… Make : Hensel/Sadhrish
GRP POLES
267 ELEC-6.1.34 …… Makes: Bajaj / Kemrock / Valmont/Sumip/Helipole
268 ELEC-6.1.35 …… Makes: Bajaj / Kemrock / Valmont/Sumip / Helipole
6.2 LT PANEL AND ACCESSORIES
269 ELEC-6.2.3 …… .Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec
270 ELEC-6.2.4 …… Make: Conzerve/Elmeasure/
Meco/HPL/L&T/Schneider/AE/Socomec
271 ELEC-6.2.5 …… Make: Kappa/L&T/Seimens/C&S/Schneider
272 ELEC-6.2.6 …… Make: L&T /C&S/SALZER/HPL

Page 390 of
8
273 ELEC-6.2.7 …… Make: L&T /C&S/SALZER/HPL

274 ELEC-6.2.8 …… Makes: CONZERVE / ELMEASURE / MECO / HPL /

HAVELLS/L&T.
275 ELEC-6.2.12 …… Makes: L&T/Seimens/Epcos/Schneider/Havells
/Legrand
276 ELEC-6.2.13 …… Makes: L&T/Seimens/Epcos /Schneider/ ABB/Neptune
277 ELEC-6.2.14 …… makes: L&T
(SALZER)/ABB/Schneider/Seimens/C&S/HPL
278 ELEC-6.2.15 …… Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells
279 ELEC-6.2.16 …… Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells
280 ELEC-6.2.17 …… Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells
281 ELEC-6.2.18 …… Make:Seimens/ ABB/ Schneider/L&T/C&S/HPL
6.3 SUB STATION EQUIPMENT AND TRANSFORMERS
282 ELEC-6.3.1 …… make:as approved By DISCOMs
283 ELEC-6.3.1a …… Make:ABB/ Megawin/Amara Raja/L&T
284 ELEC-6.3.2 Makes:ABB/Schneider/Seimens/Kirlos kar/Amara
Raja/Megawin/L&T
285 ELEC-6.3.3 …… Makes:ABB/Schneider/Seimens/Kirlos kar/Amara
Raja/Megawin/L&T
Oil Immersed TRANSFORMERS
286 ELEC-6.3.4 ……. Make:ABB/ALSTOM/SEIMENS/Kirloskar/Voltamp/
Esennar/KPEL/SSE/THOTA / Vajra
288 ELEC-6.3.5 ……. Makes:Schneider/Kirloskar/Voltamp/ Esennar/
Toshiba/ KPEL/ Powertech /SSE / THOTA / Vajra
289 ELEC-6.3.5 A …….. Makes:Schneider/Kirloskar/Voltamp/ Esennar/
Toshiba/ KPEL/ Powertech /SSE / THOTA / Vajra
290 ELEC-6.3.5 B …….. Make:Schneider/Kirloskar/Voltamp/ Esennar/ Toshiba/
KPEL/ Powertech /SSE/ THOTA / Vajra
292 ELEC-6.3.6 …… Make:ABB/ALSTOM/SEIMENS/Crompton/Kirloskar/Vo
ltamp/ Esennar
293 ELEC-6.3.7 …… Make:ABB/ALSTOM/SEIMENS/Crompton/Kirloskar/Vo
ltamp/ Esennar
6.6 LIGHTENING PROTECTIVE SYSTEM
Advanced LPS
294 ELEC-6.6.1 a …… Make : THUNDERGUARD(EARTHPLUS)/ KALRE/
NIMBUS / FOREND
295 ELEC-6.6.1 b …… Make : THUNDERGUARD(EARTHPLUS)/ KALRE/
NIMBUS / FOREND
296 ELEC-6.6.1 c …… Make : THUNDERGUARD(EARTHPLUS)/ KALRE/
NIMBUS / FOREND
297 ELEC-6.6.3 …… Make: EARTHPLUS (THUNDER GUARD) / NIMBUS /
KALRE / FOREND
298 ELEC-6.6.5 …… Make: EARTHPLUS /CIRPROTEC /INDALAC /
INGESCO
SECTION 7
7.0 LOCAL AREA NETWORK
299 ELEC-7.1.1 …… Makes: Systimax /Panduit/ Siemond/ Legrand
300 ELEC-7.1.2 …… Makes: Systimax /Panduit/ Siemond/ Legrand
301 ELEC-7.1.3 …… Makes: Systimax /Panduit/ Siemond/ Legrand
302 ELEC-7.1.4 …… Makes: Systimax /Panduit/ Siemond/ Legrand
303 ELEC-7.1.5 …… Makes: Systimax /Panduit/ Siemond/ Legrand
Page 391 of
8
304 ELEC-7.1.6 …… Makes: Systimax /Panduit/ Siemond/ Legrand
305 ELEC-7.1.7 …… Makes: Systimax /Panduit/ Siemond/ Legrand
306 ELEC-7.1.8 …… Makes: Systimax /Panduit/ Siemond/ Legrand
307 ELEC-7.1.9 …… Makes: Systimax /Panduit/ Siemond/ Legrand
ELEC-7.1.9A …… Makes: Systimax /Panduit/ Siemond/ Legrand
308 ELEC-7.1.10 …… Makes: Systimax /Panduit/ Siemond/ Legrand
ELEC-7.1.10A …… Makes: Systimax /Panduit/ Siemond/ Legrand
309 ELEC-7.1.11 …… Makes: Systimax /Panduit/ Siemond/ Legrand
ELEC-7.1.11A …… Makes: Systimax /Panduit/ Siemond/ Legrand
310 ELEC-7.1.12 …… Makes: Systimax /Panduit/ Siemond/ Legrand
ELEC-7.1.12A …… Makes: Systimax /Panduit/ Siemond/ Legrand
311 ELEC-7.1.13 …… Makes: Systimax /Panduit/ Siemond/ Legrand
312 ELEC-7.1.14 …… Make: APW/HCL/Valrack/Netrack
313 ELEC-7.1.15 …… Make: APW/HCL/Valrack/Netrack
MANAGEBLE NET WORK SWITCHES
314 ELEC-7.1.16 …… Makes: Cisco Model CBS350-28 or equivalent in
Juniper/Extreme
315 ELEC-7.1.17 …… Makes:Cisco Model CBS 350-52 or equivalent in
Juniper/Extreme
316 ELEC-7.1.18 …… Makes: Cisco Model:S CBS 350- 8PP or equivalent in
Juniper/Extreme
317 ELEC-7.1.19 …… Makes: Cisco Model: CBS -350-28PP or equivalent in
Juniper/Extreme
318 ELEC-7.1.20 …… Makes:Cisco Model CBS 350-28SFP or equivalent in
Juniper/Extreme
319 ELEC-7.1.21 …… Makes: CISCO WS – C1000+24T-4G-L or equivalent
in JUNIPER/ EXTREME
320 ELEC-7.1.22 …… Makes: CISCO WS- C1000+48T-4G-L or equilent in
JUNIPER/EXTREME
321 ELEC-7.1.23 …… Make: CISCO-C1000+24P-4G-L or equilent in
JUNIPER/EXTREME
322 ELEC-7.1.24 …… Make: CISCO-C1000+48P-4G--L or equilent in
JUNIPER/EXTREME
323 ELEC-7.1.25 …… deleted
324 ELEC-7.1.26 …… deleted
325 ELEC-7.1.27 …… Make : Cisco Aironet 1815i or equivalent in
Ruckus/Aruba
326 ELEC-7.1.28 …… Make: CISCO-9300-24T-4G-E or equilent in
JUNIPER/EXTREME
327 ELEC-7.1.29 ………. Makes:- CISCO/JUNIPER/EXTREME
LOCAL AREA NETWORK CATEGORY-II
ELEC-7.1.30 …… Makes: D-Link/Digisol/Msys connect/Finolex
ELEC-7.1.31 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.32 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.33 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.34 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.35 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.36 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.37 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.38 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.39 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.40 …… Makes: D-Link/Digisol/Msys connect
Page 392 of
8
 ELEC-7.1.41 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.42 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.43 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.44 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.45 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.46 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.47 …… Makes: D-Link/Digisol/Msys connect
ELEC-7.1.48 …… Makes: D-Link/Digisol/Msys connect
MANAGEBLE NET WORK SWITCHES CATEGORY
II
ELEC-7.1.49 Makes: D-Link-DGS-1210-28/Digisol DG-GS4628E2
ELEC-7.1.50 Makes: D-Link-DGS-1210-52/Digisol DG-GS4652E
ELEC-7.1.51 Makes: D-Link-DGS-1210-10P/Digisol DG-GS1510PL
ELEC-7.1.52 Makes: D-Link-DGS-1210-28P/Digisol DG-
GS1528HP/C
ELEC-7.1.53 Makes: D-Link-DGS-1510-28X/Digisol DG-GS4628E-
XS
ELEC-7.1.54 Makes: D-Link-DGS-1510-52X/Digisol DG-GS4652E2-
XS
ELEC-7.1.55 Makes: D-Link-DGS-1510-28P/Digisol DG-
GS4628HPE-XS
ELEC-7.1.56 Makes: D-Link-DGS-3130-54PS/Digisol DG-
GS4652HP-XS
ELEC-7.1.57 Makes: D-Link-DGS-3630-28TC/INSI/Digisol DG-
GS492SE-B2
ELEC-7.1.58 Makes: D-Link /Digisol/Netgear/TP Link
ELEC-7.1.59 Makes: D-Link /Digisol/Netgear/TP Link
ELEC-7.1.60 Makes: D-Link /Digisol/Netgear/TP Link
ELEC-7.1.61 Makes: D-Link /Digisol/Netgear/TP Link
ELEC-7.1.62 Makes: D-Link /Digisol/Netgear/TP Link
ELEC-7.1.63 Make-D-Link /Cisco/Netgear/HP
ELEC-7.1.64 Make-D-Link / Cisco/Netgear/HP
ELEC-7.1.65 Make : BELKIN or any reputed approved make
ELEC-7.1.66 Makes: D-Link / TP-Link/ Netgear/Cisco
ELEC-7.1.67 Makes: D-Link / TP-Link/ Netgear/Cisco
ELEC-7.1.68 Makes: D-Link / TP-Link/ Netgear/Cisco
ELEC-7.1.69 Makes: D-Link / TP-Link/ Netgear/Cisco

7.3 COMPUTERS,PRINTERS AND SCANNERS

333 ELEC-7.3.1 …… Model : HP ProDesk or its equivalent in Dell
334 ELEC-7.3.2 …… Model : HP ProDesk or its equivalent in Dell
335 ELEC-7.3.3 …… Make : HP LaserJet 1020 Plus Printer (OR) It's
Equivalent in Canon /Epson
336 ELEC-7.3.4 …… makes: Canon imageCLASS MF244dw /HP/Brother
DCPB7535DW or its equivalent
337 ELEC-7.3.5 …… Make : Brother ADS-2400N document scanner (OR)
It's Equivalent in Canon/HP
338 ELEC-7.3.6 …… Makes: Finolex / Delton / Surabi / Polycab
339 ELEC-7.3.7 …… Makes: Krone or its equivalent.
340 ELEC-7.3.8 …… Makes: Finolex / Delton / Surabi / Polycab.
341 ELEC-7.3.9 …… Makes: Finolex / Delton / Surabi / Polycab
342 ELEC-7.3.10 …… Makes: Finolex / Delton / Surabi / Polycab
Page 393 of
8
343 ELEC-7.3.11 …… Makes: Finolex / Delton / Surabi / Polycab.
ELEC-7.3.16 Makes: Beetel / NEC/ Alcatel /Avaya/Seimens.
ELEC-7.3.16 Makes: HP/Dell/Lenovo
EPABX SYSTEM
7.4 SMALL SYSTEM
344 ELEC-7.4.1 …… Makes: NEC/ Alcatel /Avaya/Siemens
345 ELEC-7.4.2 …… Makes: NEC/ Alcatel /Avaya/Siemens
346 ELEC-7.4.3 …… Makes: NEC/ Alcatel /Avaya/Seimens
347 ELEC-7.4.4 …… Makes: NEC/ Alcatel /Avaya/Siemens
348 ELEC-7.4.5 …… Makes: NEC/ Alcatel /Avaya/Siemens
7.5 LARGE SYSTEM
349 ELEC-7.5.1 …… Makes: NEC/ Alcatel /Avaya/Siemens
350 ELEC-7.5.2 …… Makes: NEC/ Alcatel /Avaya/Siemens
351 ELEC-7.5.3 …… Makes: NEC/ Alcatel /Avaya/Siemens
352 ELEC-7.5.4 …… Makes: NEC/ Alcatel /Avaya/Siemens
353 ELEC-7.5.5 …… Makes: NEC/ Alcatel /Avaya/Siemens
CCTV & SURVEILLANCE SYSTEM CATEGORY-I
354 ELEC-7.6.1 …….. Makes:- Honeywell /Panasonic.
355 ELEC-7.6.2/ ……… Make: Honeywell /Panasonic.
7.6.3
356 ELEC-7.6.4/ …………. Makes Honeywell /Panasonic.
7.6.5/7.5.6
357 ELEC-7.6.7 ………… Make: Seagate/Hitachi/TOSHIBA/ED
358 ELEC-7.6.8 ……….. Make- Samsung QB55R or its equivalent make in Dell
/ LG / Samsung / Lenovo / HP
359 ELEC-7.6.9 ……….. Make: Dell / LG / Samsung / HP
CCTV & SURVEILLANCE SYSTEM CATEGORY-II
ELEC-7.6.11 …….. Makes:- D-Link/CP-Plus/Matrix.
to ELEC-
7.6.13
ELEC-7.6.14 ……… Make:- D-Link/CP-Plus/Matrix.
ELEC-7.6.15 …………. Makes:- D-Link/CP-Plus/Matrix..
ELEC-7.6.16 …………. Makes:- D-Link/CP-Plus/Matrix..

PUBLIC ADDRESSING SYSTEM

360 ELEC-7.7.1 - Make: Bosch/ Honeywell.
ELEC-7.7.7
361 ELEC-7.7.8/ Make: Ahuja/Mega/Studio Master
7.7.9/7.7.10
362 ELEC- Makes - Bosch/Honeywell
7.7.11/7.7.12
363 ELEC- Make: Ahuja/Mega/Studio Master.
7.7.13/7.7.14
364 ELEC-7.7.15 Make: Prevailing models in Market.
AUDIO-VIDEO SYSTEM
365 ELEC-7.8.1 Make: - Hitachi/ BenQ/ Sony/ Panasonic/LG
366 ELEC- Makes: Sony / NEC/Panasonic/Christie /
7.8.2/7.8.3 Hitachi/Epson
367 ELEC-7.8.4 Make: OEM Make or Custom make.
368 ELEC-7.8.5 Make: Liberty/Suvira/Prolite.
369 ELEC-7.8.6 Make: Samsung/LG/Sony
370 ELEC-7.8.7 Make: OEM Make or Custom make.
Page 394 of
8
371 ELEC- Make: Extron/Kramer
7.8.8/7.8.9
372 ELEC-7.8.10 Make: Custom make
373 ELEC-7.8.11 Make: NT/Customs.
374 ELEC-7.8.12 Make: Logitech
375 ELEC-7.8.13/ Makes: Sennheiser / AKG / Electrovoice/JBL/Bose
7.8.14/7.8.15
376 ELEC-7.8.16 Makes: BSS / Xilica / Bose/JBL/Sennheiser
377 ELEC-7.8.17 Makes: Bose / JBL / Electrovoice
378 ELEC-7.8.18 Makes: Bose / Crown / Dynacord / Audac
379 ELEC-7.8.19 Makes: Bose / JBL / Dynacord / Audac
380 ELEC-7.8.20 Makes: Bose / JBL / Electrovoice
381 ELEC-7.8.21 Makes: Bose / JBL / Electrovoice
382 ELEC-7.8.22/ Make: Electro-Voice/Bose/ JBL/Signature
7.8.23/7.8.24
383 ELEC-7.8.25 Make: Prevailing models in Market.
384 ELEC-7.8.26 Make: Prevailing models in Market.
385 ELEC-7.8.27 Makes: Extron / AMX / Lightware
to ELEC-
7.8.32
386 ELEC-7.8.33 Amrutha Technologies/Dolphin Automation &
Technology/Mangal Security Systems
8.1 MISCELLANEOUS ITEMS
NIL
9.1 WIRELESS FIRE ALARAM SYSTEM
387 ELEC-9.1.1 …… Makes: Cease Fire / Visonic / Honeywell
388 ELEC-9.1.2 …… Makes: Cease Fire / Visonic /Honeywell.
389 ELEC-9.1.3 …… Makes: Cease Fire / Visonic / Honeywell.
390 ELEC-9.1.4 …… Makes: Cease Fire / Visonic / Honeywell.
9.2 ADDRESSABLE - FIRE ALARM SYSTEM
391 ELEC-9.2.1 a - CATEGOR Makes: Notifier / Edwards/Bosch
f Y- I
392 ELEC-9.2.2 a - CATEGOR Makes: Siemens / Morley / Honeywell/
f Y- II Ravel/Seaara/Apollo/Cooper
393 ELEC-9.2.3 CATEGOR Makes: Notifier / Edwards/Bosch
Y- I
394 ELEC-9.2.4 CATEGOR Makes: Siemens / Morley / Honeywell/
Y- II Ravel/Seaara/Apollo/Cooper
395 ELEC-9.2.5 CATEGOR Makes: Notifier / Edwards/Bosch
Y- I
396 ELEC-9.2.6 CATEGOR Makes: Siemens / Morley / Honeywell/
Y- II Ravel/Seaara/Apollo/Cooper
397 ELEC-9.2.7 CATEGOR Makes: Notifier / Edwards/Bosch
Y- I
398 ELEC-9.2.8 CATEGOR Makes:Siemens / Morley / Honeywell/
Y- II Ravel/Seaara/Apollo/Cooper
399 ELEC-9.2.9 CATEGOR Makes: Notifier / Edwards/Bosch
Y- I
400 ELEC-9.2.10 CATEGOR Makes: Siemens / Morley / Honeywell/
Y- II Ravel/Seaara/Apollo/Cooper.
401 ELEC-9.2.11 CATEGOR Makes: Notifier / Edwards/Bosch
Y- I
Page 395 of
8
402 ELEC-9.2.12 CATEGOR Makes:Siemens / Morley / Honeywell/
Y- II Ravel/Seaara/Apollo/Cooper.
403 ELEC-9.2.13 CATEGOR Makes: Notifier / Edwards/Bosch
Y- I
404 ELEC-9.2.14 CATEGOR Makes: Siemens / Morley / Honeywell/
Y- II Ravel/Seaara/Apollo/Cooper.
405 ELEC-9.2.15 CATEGOR Makes: Notifier / Edwards/Bosch
Y- I
406 ELEC-9.2.16 CATEGOR Makes:Siemens / Morley / Honeywell/
Y- II Ravel/Seaara/Apollo/Cooper.
407 ELEC-9.2.17 CATEGOR Makes: Notifier / Edwards/Bosch
Y- I
408 ELEC-9.2.18 CATEGOR Makes:Siemens / Morley / Honeywell/
Y- II Ravel/Seaara/Apollo/Cooper .
409 ELEC-9.2.19 CATEGOR Makes: Notifier / Edwards/Bosch
Y- I
410 ELEC-9.2.20 CATEGOR Makes:Siemens / Morley / Honeywell/
Y- II Ravel/Seaara/Apollo/Cooper.
9.3 CONVENTIONAL - FIRE ALARM SYSTEM
411 ELEC-9.3.1 …… Makes: System Censor / Ravel/Vertex
412 ELEC-9.3.2 …… Makes: Makes: System Censor / Ravel/Vertex
413 ELEC-9.3.3 …… Makes: System Censor / Ravel/Vertex
414 ELEC-9.3.4 …… Makes: System Censor / Ravel/Vertex
415 ELEC-9.3.5 …… Makes: System Censor / Ravel/Vertex/Apollo.
416 ELEC-9.3.6 …… Makes: Makes: System Censor / Ravel/Vertex
417 ELEC-9.3.7 …… Makes: System Censor / Ravel/Vertex
418 ELEC-9.3.8 …… Makes: System Censor / Ravel/Vertex
9.4 POWDER BASED FIRE EXTINGUISHERS
419 ELEC-9.4.1 CATEGOR Makes: Cease Fire / Minimax
Y- I
420 ELEC-9.4.2 CATEGOR Makes: Safex / Kenex / Bharat /
Y- II Reliance/NewTech/Kartar
421 ELEC-9.4.3 CATEGOR Makes: Cease Fire / Minimax
Y- I
422 ELEC-9.4.4 CATEGOR Makes: Safex / Kenex / Bharat /
Y- II Reliance/NewTech/Kartar
423 ELEC-9.4.5 CATEGOR Makes: Cease Fire / Minimax
Y- I
424 ELEC-9.4.6 CATEGOR Makes: Safex / Kenex / Bharat /
Y- II Reliance/NewTech/Kartar
425 ELEC-9.4.7 CATEGOR Makes: Cease Fire / Minimax
Y- I
426 ELEC-9.4.8 CATEGOR Makes: Safex / Kenex / Bharat /
Y- II Reliance/NewTech/Kartar
CLEAN AGENT FIRE EXTINGUISHERS
427 ELEC-9.4.9 CATEGOR Makes: Cease Fire / Minimax
Y- I
428 ELEC-9.4.10 CATEGOR Makes: Safex / Kenex / Bharat / Reliance/NewTech
Y- II
429 ELEC-9.4.11 CATEGOR Makes: Cease Fire / Minimax
Y- I
430 ELEC-9.4.12 CATEGOR Makes: Safex / Kenex / Bharat / Reliance/NewTech
Page 396 of
8
 Y- II
431 ELEC-9.4.13 CATEGOR Makes: Cease Fire / Minimax
Y- I
432 ELEC-9.4.14 CATEGOR Makes: Safex / Kenex / Bharat /
Y- II Reliance/NewTech/Kartar
433 ELEC-9.4.15 …… Makes: Cease Fire or its equivalent make Model-
1ES01
AEROSOL GENERATION SYSTEM
(An alternative to water based sprinkler system)
434 ELEC-9.4.19 …… Makes: SEAARA/AGS/SALAMANDRA
435 ELEC-9.4.20 …… Makes: SEAARA/AGS/SALAMANDRA
436 ELEC-9.4.21 …… Makes: SEAARA/AGS/SALAMANDRA
437 ELEC-9.4.22 …… Makes: SEAARA/AGS/SALAMANDRA
438 ELEC-9.4.23 …… Makes: SEAARA/AGS/SALAMANDRA
439 ELEC-9.4.24 …… Makes: SEAARA/AGS/SALAMANDRA
440 ELEC-9.4.26 …… Makes: SEAARA/AGS/SALAMANDRA
441 ELEC-9.4.27 …… Makes: SEAARA/AGS/SALAMANDRA
ELEC-9.4.30 …… Makes: Reliance or equivalent approved by
APSDR&FS Deptt.
9.5 FIRE HYDRANT AND SPRINKLER SYSTEM
ELECTRIC DRIVEN MAIN FIRE PUMPS(SPLIT
CASE)
442 ELEC-9.5.1 …… Makes of Pumps: Kirloskar / Mather&Platt/Lubi. Makes
of Motors: Siemens/ ABB/ Kirloskar/Lubi
443 ELEC-9.5.2 …… Makes of Pumps: Kirloskar / Mather&Platt/Lubi. Makes
of Motors: Siemens/ ABB/ Kirloskar/Lubi
444 ELEC-9.5.3 …… Makes of Pumps: Kirloskar / Mather&Platt/Lubi Makes
of Motors: Siemens/ ABB/ Kirloskar//Lubi
445 ELEC-9.5.4 …… Makes of Pumps: Kirloskar / Mather&Platt/Lubi. Makes
of Motors: Siemens/ ABB/ Kirloskar/Lubi
446 ELEC-9.5.5 …… Makes of Pumps: Kirloskar / Mather&Platt/Lubi. Makes
of Motors: Siemens/ ABB/ Kirloskar/Lubi
DIESEL ENGINE DRIVEN FIRE PUMPS
447 ELEC-9.5.6 …… Makes of Engines : Kirloskar / Cummins. Makes of
Pumps : Kirloskar / Mather&Platt
448 ELEC-9.5.7 …… Makes of Engines : Kirloskar / Cummins. Makes of
Pumps : Kirloskar / Mather&Platt
449 ELEC-9.5.8 …… Makes of Engines : Kirloskar / Cummins. Makes of
Pumps : Kirloskar / Mather&Platt
450 ELEC-9.5.9 …… Makes of Engines : Kirloskar / Cummins. Makes of
Pumps : Kirloskar / Mather&Platt
451 ELEC-9.5.10 …… Makes of Engines : Kirloskar / Cummins. Makes of
Pumps : Kirloskar / Mather&Platt
ELECTRIC DRIVEN MAIN FIRE PUMPS(END
SUCTION)
452 ELEC-9.5.11 …… Makes of Pumps: Kirloskar / Mather&Platt/Lubi. Makes
of Motors: Siemens/ ABB/ Kirloskar/Lubi
453 ELEC 9.5.12 …… Makes of Pumps: Kirloskar / Mather&Platt/Lubi. Makes
of Motors: Siemens/ ABB/ Kirloskar/Lubi
454 ELEC 9.5.13 …… Makes of Pumps: Kirloskar / Mather&Platt/Lubi. Makes
of Motors: Siemens/ ABB/ Kirloskar/Lubi
DIESEL ENGINE DRIVEN MAIN FIRE PUMPS(END
Page 397 of
8
 SUCTION)
455 ELEC-9.5.14 …… Makes of Engines : Kirloskar / Cummins. Makes of
Pumps : Kirloskar / Mather&Platt
456 ELEC-9.5.15 …… Makes of Engines : Kirloskar / Cummins. Makes of
Pumps : Kirloskar / Mather&Platt
457 ELEC-9.5.16 …… Makes of Engines : Kirloskar / Cummins. Makes of
Pumps : Kirloskar / Mather&Platt
JOCKEY PUMPS
458 ELEC-9.5.17 …… Makes of Pumps : Kirloskar / Mather&Platt. Makes of
Motors : Siemens/ ABB/ Kirloskar
459 ELEC-9.5.18 …… Makes of Pumps : Kirloskar / Mather&Platt. Makes of
Motors : Siemens/ ABB/ Kirloskar
460 ELEC-9.5.19 …… Makes of Pumps : Kirloskar / Mather&Platt. Makes of
Motors : Siemens/ ABB/ Kirloskar
BOOSTER PUMPS
461 ELEC-9.5.20 …… Makes of Pumps : Kirloskar / Mather&Platt. Makes of
Motors : Siemens/ ABB/ Kirloskar
462 ELEC-9.5.21 …… Makes: Kirloskar
463 ELEC-9.5.22 …… Makes: Kirloskar
464 ELEC-9.5.23 …… Makes: Kirloskar
CONTROL PANELS
465 ELEC-9.5.24 …… Makes: L&T- D shine / Schneider-NS NSX/Legrand -
DP X3/ Siemens-3VL / Hager-h3/C&S -
Winbreak2Makes of Meters : Schneider (Conzerve) /
L&T / Elmeasure / Siemens
466 ELEC-9.5.25 …… Makes: L&T- D shine / Schneider-NS NSX/Legrand -
DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Makes of Meters : Schneider (Conzerve) / L&T /
Elmeasure / Siemens
467 ELEC-9.5.26 …… Makes: L&T- D shine / Schneider-NS NSX/Legrand -
DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Makes of Meters : Schneider (Conzerve) / L&T /
Elmeasure / Siemens
468 ELEC-9.5.27 …… Makes: L&T- D shine / Schneider-NS NSX/Legrand -
DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Makes of Meters : Schneider (Conzerve) / L&T /
Elmeasure / Siemens
469 ELEC-9.5.28 …… Makes: L&T- D shine / Schneider-NS NSX/Legrand -
DP X3/ Siemens-3VL / Hager-h3/C&S -Winbreak2
Makes of Meters : Schneider (Conzerve) / L&T /
Elmeasure / Siemens
470 ELEC-9.5.29 …… Makes of MCCBs : L&T / Siemens / Legrand /
Schneider / ABB / Hager
Makes of Meters : Schneider (Conzerve) / L&T /
Elmeasure / Siemens
MS PIPES
471 ELEC-9.5.30 …… Makes: Jindal / Hissar / Tata pipes/Prakash Surya
472 ELEC-9.5.31 …… Makes: Newage/ Winco/ Padmini / Safex/Minimax/
Newtech/Honeywell/Kartar
473 ELEC-9.5.32 …… Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / SANT/NEU-G/Honeywell//Kartar
474 ELEC-9.5.33 …… Makes: BDK / NEU-G / Leader/ Zolotto /
Page 398 of
8
 SANT/Honeywell//Kartar
475 ELEC-9.5.34 …… Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto
/SANT/NEU-G/Honeywell//Kartar
476 ELEC-9.5.35 …… Make: NEU-G/Zolotto/Padmini/SANT/Honeywell/Kartar
477 ELEC-9.5.36 …… Makes: Newage/ Winco/ Padmini / Safex /
Minimax/NewTech/Honeywell/Kartar
478 ELEC-9.5.37 …… Makes: Newage/ Winco/ Padmini / Safex /
Minimax/NewTech/Honeywell/Kartar
479 ELEC-9.5.38 …… Makes: Leader / Zolotto/SANT/Honeywell/Kartar
480 ELEC-9.5.39 …… a) 36.6 Mtr Long 20mm (Nominal internal) dia water
hose Thermoplastic / Textile reinforced / Rubber
braided / Polypropylene Type - 2 as per IS:12585
Makes: Reliance/ Newage/
Safex/NewTech/Winco/Minimax/Kartar
b) 20mm (Nominal internal) dia gun metal ball/gate
valve and nozzle. Makes:NEU-G/SANT / Safex/Kartar.
481 ELEC-9.5.40 …… makes:Minimax/Safex/Newage/Winco
/Padmini/NewTech/Kartar
482 ELEC-9.5.41 …… Makes: Newage/ Winco/ Padmini / Safex /
a-b Minimax/NewTech/Kartar.
483 ELEC-9.5.42 …… . Makes: Newage/ Winco/ Padmini / Safex /
Minimax/NewTech/Honeywell/Kartar
484 ELEC-9.5.43 …… Makes: Newage/ Winco/ Padmini / Safex /
Minimax/NewTech/Honeywell/Kartar
485 ELEC-9.5.45 …… Makes: HD / TYCO / VIKING / NEWAGE/ SHARP /
SAFEX/Kartar
486 ELEC-9.5.46 …… Makes: HD / TYCO / VIKING / NEWAGE/ SHARP /
SAFEX/Kartar
487 ELEC-9.5.47 …… Makes: Danfoss / Indfoss /Systemsensor/Honeywell
488 ELEC-9.5.48 …… Makes: System Sensor / Switzer/Honeywell
489 ELEC-9.5.49 …… Makes: System Sensor / Switzer/Honeywell
490 ELEC-9.5.50 …… MAKES: HGURU / FIEBIG
491 ELEC-9.5.51 …… Makes: Zoloto / Leader / SANT/NEU- G/Kartar
492 ELEC-9.5.52 …… Makes: Zoloto / Leader / SANT/NEU- G/Kartar
493 ELEC-9.5.53 …… Makes: Zoloto / Leader / SANT/Kartar
494 ELEC-9.5.54 …… Makes: Tyko/Newage/HD/Kartar
495 ELEC-9.5.55 …… Makes: HD / TYCO / NEWAGE
496 ELEC-9.5.56 …… Makes:Normex /SANT/Kartar
497 ELEC-9.5.58 …… . Make:IWL(PIPE KOT) or its equivalent
498 ELEC-9.5.60 …… 1) DOL Starter Make C&S/ Crompton / L&T /KSP/
Siemens/BCH
2) Volt meter Make:Conzerve/Elmeasure/ Meco/
HPL/L&T/ Socomec
3) AmmeterMake: Conzerve/Elmeasure/Meco/HPL/
L&T/ Schneider/AE/ Socomec
4) selector switch
Make: L&T / C&S/ Salzer/HPL
5) Single Phase Preventor Makes: L&T / Minilec /
Powertec. - 1No.
6) capacitor Makes: L&T / Siemens / Schneider /
Epcos/Havells.
Page 399 of
8
 7) MPCB (Motor Protection Circuit Breaker) Makes:
L&T- D shine / Schneider-NS NSX/Legrand -DP X3/
Siemens-3VL.
8) ON/OFF/TRIP push button actuators and integral
contact block of dia. 22.5 mm
i Make:Seimens/ ABB/ Schneider/ L&T/ C&S/HPL
9) power contactor
Make: Seimens/ABB/
Schneider/L&T/C&S/HPL/Havells - 3 pole, 35-40A
AC3 Rating, Contactor
10) thermal over load relay
Make:Seimens/ABB/Schneider/L&T/C&S/HPL/Havells
- 1 No
11)Current Transformer Make: Kappa/L&T/ Seimens/
C&S/ Schneider - 3 No
499 ELEC-9.5.61 …… Makes: Newage/ Winco/ Padmini / Safex /
Minimax/NewTech/Honeywell/ Kartar.
500 ELEC-9.5.62 …… Makes: HD / TYCO / VIKING / NEWAGE/ SHARP /
SAFEX/ KARTAR
501 ELEC-9.5.63 …… Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto /SANT/NEUG/Honeywell/ Kartar
502 ELEC-9.5.64 a …… Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
to e Zolotto / SANT/Honeywell/ Kartar
503 ELEC-9.5.65 …… Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / SANT/Honeywell/ Kartar
504 ELEC-9.5.66 …… Makes: HD / TYCO / VIKING / NEWAGE/ SHARP /
SAFEX
505 ELEC-9.5.67 …… . Makes: HD / TYCO / VIKING / NEWAGE/ SHARP /
SAFEX
506 ELEC-9.5.69 Make of motor: Crompton, Kirloskar, Texmo, KSB,CRI,
Suguna with ISI mark. Pump:Green
tech,Kisan,Ultrajet, Pressurejet, Ambica tools, Seaara
or any ISI
507 ELEC-9.5.70 Make Petrol engine: Honda, Kisan, Yamaha
508 ELEC-9.5.71 Make of motor: Crompton, Kirloskar, Texmo, KSB,CRI,
Suguna with ISI mark. Pump:Green
tech,Kisan,Ultrajet, Pressurejet, Ambica tools, Seaara
or any ISI
10.1 GENERATORS SPECIFICATION
509 ELEC-10.1.1 …… Engine Makes:Cummins/Koel Green/Sterling/
a-i mahindra/Elmot Power Gen/Ashok Leyland/Greaves
Alternator Make:Stamford/ Kirloskar/
CromptonGreaves/Leroysomer
510 ELEC-10.1.1 …… Engine Makes:Caterpillar/Cummins/Koel
j-n Green/Mahindra/Elmot power Gen/Ashok
Leyland/Greaves
Alternator Make:Leroy somer/Crompton
Greaves/Stamford
511 ELEC-10.1.1 …… Engine Makes:
o- t Caterpillar/Perkins/Cummins/Greaves/KOEL
Alternator Make:Leroy somer/Crompton
Greaves/Stamford

Page 400 of
8
 ELEC-10.1.5 …… Engine Makes:Cummins/Koel Green/Sterling/
a-i mahindra/Elmot Power Gen/Ashok Leyland/Greaves
Alternator Make:Stamford/ Kirloskar/
CromptonGreaves/Leroysomer
ELEC-10.1.5 …… Engine Makes:Caterpillar/Cummins/Koel
j-n Green/Mahindra/Elmot power Gen/Ashok
Leyland/Greaves
Alternator Make:Leroy somer/Crompton
Greaves/Stamford
ELEC-10.1.1 …… Engine
o- t Makes:Caterpillar/Perkins/Cummins/Greaves/KOEL
Alternator Make:Leroy somer/Crompton
Greaves/Stamford
11.1 INVERTERS and ONLINE UPS SYSTEMS
512 ELEC-11.1.1 …… Makes: Exide / Amar Raja / Samhitha/ Microtek
513 ELEC-11.1.2 …… Makes: Numeric/APC/Fuji Electric/ Sakshham
/Emerson
514 ELEC-11.1.3 …… Makes: Numeric/APC/Fuji Electric / Sakshham
/Emerson
515 ELEC-11.1.4 …… Makes: Mitsubishi/ Socomec /Schiender(APC)/
Legrand/Fuji Electric (Consul Neowatt)
516 ELEC-11.1.9 …… Makes: Quanta / Racket / Exide.
517 ELEC-11.1.10 …… Makes: Quanta / Racket / Exide.
518 ELEC-11.1.11 …… Makes: Quanta / Racket / Exide.
519 ELEC-11.1.12 …… Makes: Quanta / Racket / Exide.
520 ELEC-11.1.13 …… Makes: Quanta / Racket / Exide.
521 ELEC-11.1.14 …… Makes: Quanta / Racket / Exide.
522 ELEC-11.1.15 …… Makes: Quanta / Racket / Exide.
523 ELEC-11.1.17 …… Makes: Amar Raja (Power Zone) or Equivalent model
of Exide / Panasonic / Gotech.
ELEC-11.2.1 Makes: Fuji Electric / Numeric/APC(Schneider)
13.1 LIFTS (New Installation)
524 ELEC-13.1.1 ……
makes:Kone/Otis/Schindler/Mitsubishi/Johnson/Thyss
enKrupp
525 ELEC-13.1.2 ……
makes:Kone/Otis/Schindler/Mitsubishi/Johnson/Thyss
enKrupp
526 ELEC-13.1.3 ……
makes:Kone/Otis/Schindler/Mitsubishi/Johnson/Thyss
enKrupp
527 ELEC-13.1.4 ……
makes:Kone/Otis/Schindler/Mitsubishi/Johnson/Thyss
enKrupp
528 ELEC-13.1.5 ……
makes:Kone/Otis/Schindler/Mitsubishi/Johnson/Thyss
enKrupp
529 ELEC-13.1.6 ……
makes:Kone/Otis/Schindler/Mitsubishi/Johnson/Thyss
enKrupp
530 ELEC-13.1.7 ……
makes:Kone/Otis/Schindler/Mitsubishi/Johnson/Thyss
Page 401 of
8
 enKrupp
531 ELEC-13.1.8 ……
makes:Kone/Otis/Schindler/Mitsubishi/Johnson/Thyss
enKrupp
532 ELEC-13.1.9 …… makes:Kone/Otis/Schindler/Mitsubishi/Johnson/Thyss
enKrupp
SECTION- 14 (Electrical items
recommended by Chief Engineer
(APMSIDC)
MEDICAL GAS PIPE LINE SYSTEM
533 ELEC-14.1.1 Make: IBP Conex / Maxflow
to 14.1.10
534 ELEC-14.1.11 Makes: Aktiv Technologies// Atlas Capco/ Draeger
to 14.1.19 Medical/ / Airox Technologies / Aastha Medical
technologies/ GMP Technical Solutions / Medicare
gas pipe line/Mediline Engineers
535 ELEC-14.1.20/ Make: Siemens / Johnson Controls / Medicare gas
14.1.21 pipe line/ Mediline Engineers/ Aktiv Technologies//
Atlas Capco/ Draeger Medical/ / Airox Technologies
STP & ETP WORKS (Electro-Mechanical items)
536 ELEC-14.2.1 Fabricated item as per specification with SOR
to ELEC- approved makes of MS/SS
14.2.5

537 ELEC-14.2.6 Fabricated item as per specification with SOR

to ELEC- approved makes of MS/SS
14.2.8
538 ELEC-14.2.9/ Make: Kay/Everest/Swan/A1/Jyothi Airtech/ Crystal
14.2.10 Air/Kruger/ System Air/ Carry Air / Aerotech
539 ELEC-14.2.11 Make: MettlerToledo/Aster/Transformium
Engrs/Konvio
540 ELEC-14.2.12/ Makes: Rehau/OTT/SSI/Aquaflex/Techpro/Shridevi
14.2.13 /Sreetech
541 ELEC-14.2.14 Makes: Kishor/KSB/Grundfos/CRI/Wilo/Kirloskar
to ELEC-
14.2.17
542 ELEC-14.2.18/ Fabricated item as per specification with SOR
14.2.19 approved makes of MS/SS with reputed brands of
Motor like Kirloskar/KSB/Texmo/CRI/Crompton

543 ELEC-14.2.20 Makes: Kay/Everest/Swan/A1/Jyothi Airtech/ Crystal

to ELEC- Air/ System Air/ Carry Air / Aerotech
14.2.21
544 ELEC-14.2.22/ Pipes as per specification with SOR approved makes
14.2.23 of MS/ SS
545 ELEC-14.2.24 Makes: Rehau/OTT/SSI/Aquaflex/Techpro/Shridevi
/Sreetech/ MM Aqua/ Tecpro/Enery Equipment
546 ELEC-14.2.25 Makes: Kishor/KSB/Grundfos/CRI/Wilo/Kirloskar
to ELEC-
14.2.28
547 ELEC-14.2.29 Make: ShivPAD/Eimco-KCP/PicoPuro/Voltas
to ELEC-
Page 402 of
8
 14.2.31
548 ELEC-14.2.32 Make: Johnson/Kirloskar/KSB/Grundfos/CRI/Wilo
to ELEC-
14.2.34
549 ELEC-14.2.35/ Make: Hitech/Sukrut/Ultra Aqua/Philips/Equivalent
14.2.36
550 ELEC-14.2.37/ Makes: Kishor/KSB/Grundfos/CRI/Wilo/Kirloskar
14.2.39
551 ELEC-14.2.40 Makes: Sreetech/Fluid Systems/Anju Enterprises/Any
to ELEC- approved make
14.2.2.43
552 ELEC-14.2.44/ Makes:Verito Engineering/Fluid Systems/ Fabricated
14.2.45 item as per specification with SOR approved makes of
MS/SS with reputed brands of accessories
553 ELEC-14.2.46/ Makes: Kishor/KSB/Grundfos/CRI/Wilo/Kirloskar
14.2.48
554 ELEC-14.2.49 Make: PD pumps / Rotomac / Alpha helical /Roto
555 ELEC-14.2.50/ Make: Hydro Press/Yo-Tana/Amar.
14.2.51
556 ELEC-14.2.52 Makes:Verito Engineering/Fluid Systems/ Fabricated
item as per specification with SOR approved makes of
MS/SS with reputed brands of accessories
557 ELEC-14.2.53 Make: MM Machinery/Safexelectromech/Vertex
Cranes/Df Hoist/Reva Cranees/Aditya or any reputed
brand
558 ELEC-14.2.54 Make: MM Aqua/ Tecpro/Enery Equipment/Rehau/
OTT/ SSI/Aquaflex/Techpro/Shridevi /Sreetech
559 ELEC-14.2.55 As Per Approved Makes in SOR for uPVC/D.I./KSC
to ELEC- Pipes/ Reputed makes with ISI
14.2.61
560 ELEC-14.2.62/ Makes: Metlor Tolodo/Vector
14.2.63 Technologies/Lutron/Spectra Labs/Kytola/Any reputed
brand with ISI
561 ELEC-14.2.64 Makes: HGURU / FIEBIG and Approved makes with
ISI
BUILDING MANAGEMENT SYSTEMS
562 ELEC-14.3.1/ Makes HP/IBM/DELL
14.3.2
563 ELEC-14.3.3 Make: - Honeywell / Siemens/ Schneider/Johnson
to 14.3.17 Controls/Delta
564 ELEC-14.3.18/ L&T/ABB/Meco/Schneider/Siemens
14.3.19
565 ELEC-14.3.20/ Make: Honeywell / Siemens/ Schneider/Johnson
14.3.21 Controls/Delta
ACCESS CONTROL SYSTEM
566 ELEC-14.4.1 Makes -
to 14.4.9 Matrix/Honeywell/ESSL/Siemens/Delta/Johnson
Controls/Bosch
567 ELEC-14.4.10/ Make : Rosslare/Software house/Spectrum
14.4.11
NURSE CALLING SYSTEM
568 ELEC-14.5.1 Deleted
Page 403 of
8
 to 14.5.12

GUIDELINES FOR ELECTRICAL WORKS

PREFACE

Electrical supply and installation are an important and essential part of Building Services. Right
from initial planning, design, selection of material, installation / method of construction; to
testing, commissioning and maintenance; every aspect is governed by statutory provisions
referring various Standards and Codes. All such norms are oriented to minimize risk, provide
safe use, operation, functionality, and convenience throughout service life.

Any lapse in any of the above aspect may lead to severe effects on human life and devastation of
assets. Occasions of electrical fires are increasing with the increasing use and electrical
gadgets. Unfortunately, still it is seen that Electrical Installation is given least importance.
Qualities and safeties are compromised out of connivance or lack of technical knowledge. Many
times, electrical work gets executed through non- qualified persons not having required
knowledge and Permit in that regard. Such hired persons work on labor basis to whom non-
standard material is supplied without any base of ‘Design’. There is no person to supervise
quality and safety aspects, most of which remains ‘concealed’ as the work gets completed.

In case of High-Rise buildings norms are more stringent. Fire hazard is more prominent risk
factor as evacuation in high-rise building is a challenging task. Part 3 section 7 of NEC gives
special guidelines in this regard.

The person who uses, operates electrical installation is not expected to know the real technical
aspects of design, material used, quality of work, adherence to safety, compliance with
statutory provisions. Under the circumstances it has become a need to set base line
parameters. Plug the loopholes, get the work done adhering to norms and standards and
make someone responsible so that in case of any lapse /mishap such person / agency can be
made answerable.
Important Note:

1. SSR rates for Electrical items are purely for guidance of the officers in preparation of estimates
vide Para 113 of APPWD Code. Authority who prepares the estimate is, however responsible for
proper rates as envisaged in Para 45 of APPWD Code.

2. The rates published in the Buildings SoR 2021-22 are the ceiling rates only and the estimate
preparing authorities are responsible for the correctness and reasonableness of the rates and
technical specifications adopted in the estimates

Page 404 of
8
The following guidelines /recommendations / mandates are basically given to execute work
of Electrical Installation.

1. ARCHITECTURAL / CIVIL WORK PROVISIONS RELATED TO ELECTRICAL

INSTALLATION

1.1 Architectural Planning requirements:

At planning stage Architect shall discuss and consider requirements of Electrical Consultant /
Contractor in respect with site and location of construction and in respect with drawings of
building requirement of spaces, clearances, approach ways, raceways, shafts,
recommended wall thickness, required provisions for prevention from fire hazard likely to
originate from electrical installation.

If proposed construction is within vicinity of existing over-headline, underground cable

compliance with Regulation 63 of CEA Safety Regulations shall be checked prior to
commencement of any work on site.

Architect shall incorporate following points in the drawings related to services as per the applicable
requirements.

1.1.1 Site Plan:

Site plan shall show existing overhead electrical lines / underground cables if any and proposed
construction within the boundaries of the area to be developed.

1.1.2 Routes and service entry points:

Architectural drawings shall clearly mark electrical service entry points, cable routes below
ground, through the building structure, so that detailing in electrical shop drawings will restrict
the work within specified route and no conflict shall occur with other building utility service.
The drawings shall specify required horizontal and vertical clearance to be maintained between
other utility services.

1.1.3 Locations of Electrical Panels:

Locations and position for main and sub electrical panels shall be marked, and adequate
space / room shall be allocated considering dimensions of panel, clearance in front, side and
back. Consideration shall be given to space required for opening of the panel doors / racking
out breakers, and approach boundaries (Refer NEC Part1 / section 24 Electrical Safety), and
accessibility. Floor mounting panels shall preferably be located in separate Electrical Panel
Rooms having outside door opening, required fire rating (two hours if not specified) and
ventilation arrangement.

NOTE – Special consideration shall be given to this point in case of High-Rise buildings.

1.1.4 Electrical meter rooms:

Meter rooms shall be separate. It shall be planned to have sufficient head room and clear space in
front of meters, control switches (at least 1m). Space on wall shall be sufficient to accommodate
required number of meters at suitable height so that readings can be taken without aid of any
tackle. Also, the switchgears shall be at least 0.5 m above floor level and within such height to
have an easy access for operation. The meter room shall be well ventilated, protected from
Page 405 of
8
external influences like sun, rain, water seepages, entry of rodents. Location of meter room shall
be suitably adjacent or nearest to cable duct / shaft / vertical route of mains.

NOTE – Meterroomsshall not be located below staircaseswhere aboverequirements

could notbecomplied with.

1.1.5 Movement of heavy / bulky electrical equipment:

For installation of electrical equipment within building which is likely to be heavy / bulky in size or
removing it for maintenance, provision of adequate passages, stair ways or any alternate
provision for its shifting / movement shall be considered.

1.1.6 Shafts /ducts:

There shall be provision of shafts with required fire rating ( 2 hours if not mentioned
specifically) for vertical electrical distribution which shall preferably be adjacent to electrical
panels. Shafts shall be separate for electrical HT cables, LT power cables / bus-bar trucking
and cable work of Extra Low Voltage systems like telephones, security system, fire alarm,
signaling, BMS or data networking etc. If independent shaft is not possible, there shall be an
arrangement for segregation in between, which shall have required fire rating same as that of
shaft. No other utility service shall run through these shafts. Shafts shall be accessible at all
levels with doors having fire rating as that of shaft and shall not open in fire escape staircase.
All shafts shall have fire prevention provision as per National Building Code and fire safety
requirements of local statutory authorities.

NOTE- As per CEA Reg.36 provision in respect of independent electrical service shaft is
mandatory for all buildings above 15m height (High-Rise buildings).

1.1.7 Interior design and Electrical Layouts:

It is recommended to prepare interior layouts so as to plan electrical points, locations of

switch boards to suite the aesthetics, functionality as well as for comfort and ease of
operation.
1.1.8 Aesthetics and Electrical Safety

To avoid conflicts between Architect from perspective of aesthetic and person executing
electrical installation work from the point of view of safety requirements of electrical work,
convenience and ease of installation and further maintenance depending on type of wiring
(concealed / surface / hybrid), location of distribution boxes, requirement of under-floor truncking
/ false flooring / false ceiling, wall partitions and openings to enter into / work within as per the
need. These points shall be decided at planning stage.

1.1.9 Illumination

Within interior work number, type, size, and location of luminaries shall be decided and agreed
upon mutually between Architect and Electrical Agency, considering technical parameters of lux
level, CCT, heat dissipation, accessibility and maintainability.

1.1.10 Ceiling Fans

Location of ceiling fans shall suite recommended minimum clearance between ceiling /
false ceiling and fan blade (225mm), floor level and fan blade(2400mm).Sweep of fan blades
shall not obstruct light source. Location and size of fan shall also suite utility from the point of
Page 406 of
8
view of users and aesthetically match with false ceiling design.

NOTE: Sometimes due to afterthought provision of false ceiling, it creates problems

affecting required clearances. Under some cases, replacement of down rod with suitable
length may solve problem but in case of limited ceiling height it is not possible.

1.1.11 Exhaust fans

Wherever provision of exhaust fans is there, cross ventilation shall be considered to allow
sufficient fresh air to enter into particular envelop, e.g. For toilets where
Exhaust fans are proposed, door under cuts or louvers preferably at lower level for cross
ventilation shall be provided.

NOTE: Non provision of entry for fresh air creates negative pressure within the envelope
increasing load on exhaust fan resulting into heating and subsequent failure.

1.1.12 Earthing

Location of earthing pits shall be shown on drawings so that those shall always remain
open and accessible for testing and maintenance throughout the service period.

1.1.13 Restricted Access

Areas requiring restricted access to designated person, authorized to carry out electrical work
therein shall be provided with necessary arrangements.

1.1.14 Sub stations / Generators / Battery rooms

Location of required civil structure shall be considered in advance with required height of room,
door openings, firefighting system, ventilation etc.

1.2 Civil Planning and Constructional Requirements

It is important to plan activities of civil construction and electrical works in detail on bar chart or
similar tools available in project planning. The bar chart shall be updated and coordination be
monitored to avoid conflicts, breakages and reworking. Following points give general guidelines.

1.2.1 Fire rating

The electrical panel rooms, doors, segregation arrangement within shaft shall have fire rating
of 2 hours or as per requirements mentioned under NBC, Central Electricity Authority
(measures related to Safety and Electric Supply) Regulations,2010 and further amendments.

1.2.2 Shafts / Ducts /Chambers

Design and location of cable ducts, shafts, chambers, their covers, and entry points, shall
be as per shop drawings provided by electrical agency and shall be in consultation with,
considering further aspects of maintenance / repairs / replacement . Size of chambers shall
be in consideration with bending radii of cables. At every flooring level, there shall be a
provision to seal these shafts, so that in case of fire, it shall not spread, or smoke shall not
pass from one floor to other.

1.2.3 Openings and covers

Page 407 of
8
Manholes / opening of chambers shall not be less than 650mm x 550mm or 650mm India.,
where opening is intended for entry of person. C overs of manholes, chambers shall bear
sufficient strength to with stand loads likely to be imposed on the structure. Covers shall be
marked with the name of the service.
Openings / covers of Junction boxes / draw-in boxes / accessories in conduit systems with
inspection openings shall always be accessible.

1.2.4 Enclosures for underground cables

Pipes to be used for cable as enclosures shall be of required diameter so that cable can pass
through or removed from easily and have sufficient mechanical strength and shall be erected
at required depth to suite requirements of IS 1255.

1.2.5 Wall thickness

Walls shall be of sufficient thickness to accommodate concealed boxes /switchboards /

distribution boxes. So thatinstallation of boxes will not affect strength of wall. Additional
strengthening shall be considered if necessary.

NOTE : Depth of box may be 60 mm or vary depending on manufacturer’s

design.Under circumstances in 4”/100 mm wall it is not possible to accommodate these
boxes back-to-back. Staggering may solve problem to certain extent.

1.2.6 Structural strength

In Wiring Installation where Cable Ladder, Tray system is used for cable
management, its structure along with the load of cables which it is going to support, is
likely to impose load on the primary structure of building. This situation occurs when supportsof
this system are fixed on building structure. For this building structure shall have capacity to
bare the load.

At some locations there are chances of conduits getting crowded endangering structural
strength due to number of circuits entering / passing out from the particular DB / panel. This
situation may occurin beam, slab, and wall. If such situation is unavoidable necessary measures
may be required to be taken to retain structural strength.
1.2.7 Sleeves / core cutting
As far as possible sleeves shall be got erected for entry of wires / cables through wall,
flooring, RCC structure during construction to avoid core cutting, damages and reworking at
finishing stage. Sometimes core cuttings may berequired whichshall be done with the consent of
structural engineer and under supervision of civil engineer.

1.2.8 Water leakages / seepages

Design shall take into consideration possible seepages, leakages, accumulation, and ground in-
surge of water, which is hazardous to electrical installation. Required provisions shall be made at
such locations to prevent and work shall be executed with due care.

1.2.9 Bathrooms /washrooms

Within bathrooms / washrooms, location of showers, faucets shall be such that during use,
water shall not splash on switch boards / electrical outlets / fittings.

1.2.10 Tandems in Flat Slab post tension structures

Page 408 of
8
For flat slab post tension structure’s locations of tandems marking shall be made to avoid puncture
of / damage to tandems during electrical construction activity.

1.2.11 Earthing

Any construction work, including excavation, subsequent to construction of earthing electrode/s ; it

shall not disturb / damage any part of earthing system. Any civil work on construction site
shall not cause cover-up / concealing of any portion of electrical earthing system without
notice and consent of person In- Charge of electrical work.

1.2.12 Sub stations / Generators / Batteries

Trenches, ventilation, approach roads shall be provided as per necessity.

2. ELECTRICAL PROVISIONS

2.1 Statutory Obligations – Appointment of Licensed Electrical Contractor

Reg .29(1) shall be strictly followed by the Developer and work shall be got done through Licensed
Electrical Contractorwho shall submit Test Report of the work carried-out by him.

Developer may take undertaking from the Licensed Electrical Contractor, who shall be
responsible to do the work through the qualified workmen having required permit in that
regard. He shall also see that the material to be used, work and workmanship shall conform to
respective norms, standards, and Regulations.

NOTE–All hiddenwork shall be checked for conformity with thestandards prior to get it
concealed, shall be certified by the contractor.

2.2 Statutory Obligations–Approvals /Permissions / Licenses

Required approvals shall be taken as per related Rules and Regulations mentioned below prior to
the commissioning and handing over the installation for beneficial use.

a) Central Electricity Authority (measures related to safety and electric supply)

Regulations 2010 and amendments 2015, 2018
b) Reg. 32 – Generator Inspection and approval for commissioning.
c) Reg. 36 – Multi-storied building (height above 15m): inspection and NOC for
commencement of supply
d) Reg. 43 –Transformer sub-station or any installation above 660V : inspection and approval
before commencement of supply

See Annexure C of above regulations for extract of Regulations.

2.3 Material

Material used for Electrical Installation shall conform to the respective Indian standards or
International standards where relevant Indian Standards are not available.
Technical Specification of materialshall strictly adhere to the design, based on load, use, external
influences and safety.
Page 409 of
8
2.4 Wiring Installation

Electrical Installation shall conform to provisions from related sections of National Electrical
Code (NEC) and National Building Code (NBC). See Annexure A for minimum / basic
requirementsfrom the point of view of Safety and functionality.

2.5 Transformer sub-station

Transformer sub-station providing supply to the building if located within building shall either use
dry type transformer or a transformer filled with Synthetic Ester. Transformer filled with Natural
ester shall be used only if transformeris sealed (without breather). For Transformer installed in
separate roomdetached from building structure 7.5m away Mineral oil may be allowed.

2.6 Generator standby supply

For every high-rise building there must be a provision of generator supply as a standby
arrangement which shall be of adequate capacity to cater load of all emergency systems
for required time. Location and system of supply shall be such that functioning, and purpose
of Generator will not be affected due to emergency like fire in building. If fire authority requires
standby supply arrangementfor fire- fighting system also, provision of generators shall be made
accordingly.

2.7 Handing over Documents

It shall be a part of obligation on the developer to handover the documents belonging to

the prospective owner for his information and which he will need him for reference and
maintain as a record.

2.8 MCBs

For lighting circuit 6A MCB and for powercircuit of powerpoint 16A MCB shall be used. For
lighting circuits MCBs of B series may beused. For independent circuit of plug points C series
MCB shall be provided. Circuits providingsupply for appliances like Air-Conditioner / water-pump
shall be provided MCBs of ‘C ’series. AC above1.5 TR may beprovided with MCB of 20 /25 A
rating.

2.9 RCDs

Complete electrical installation must be protected against electrical shock by provision of

Residual Current Device (also referred as ELCB/RCCB) having sensitivity of 30mA. RCDs may
be provided more than one at suitable locations, to retain supply redundancy. In three phaseDBs
per phase protection maybe provided. For installation having load 10kw and above, it is also
recommended to provide RCD of300mA sensitivity at the source / point of supply to provide
protection against Fire due to leakage currents.

2.10 Main switchgears

Depending on load provision of MCCBs, Circuit breakers shall be made with precise rating of
overload, short-circuits etc.

3. Provision in respect of High-Rise Building

Page 410 of
8
3.1 Supply isolation during Emergency Sub Regulation (3) of CEA Regulation No.36 provides for
arrangement to completely isolate the supply at the time of emergency. It shall be interpreted as
below:

3.2 The provision of a device to isolate complete supply, also called Fireman’s Switch, is aimed
at restricting further danger of short circuits due to fire and spread of fire and shock hazard,
restriction on use of Lifts and any other activity running on electrical supply which may
aggravate the situation. However supply to emergency services like rescue operation; Fire-
Fighting shall not get affected with the operation of this control.

3.3 Suitable arrangement shall be done at the point of supply to separate supply of
emergency services make arrangements to identify and mark with instructions

CEA (Measures related to Safety andElectric Supply) Regulations 2010 made under section
53 read with section 177 of Electrical Act2003 Regulation29 (1):

No electrical installation work, including additions, alterations, repairs and adjustments to

existing installations, except such replacement of lamps fans, fuses, switches, domestic
appliances of voltage not exceeding 250V and fittings as in no way alters its capacity or
character, shall be carried out upon the premises of or on behalf of any consumer, supplier,
owner or occupier for the purpose of supply to such consumer, supplier, owner or occupier
except by an Electrical Contractor licensed in this behalf by the State Government and under
the direct supervision of a person holding a certificate of competency and by a person
holding a permit issued or recognized by the State Government.

3.4 Regulation12 (1):

All electric supply lines and apparatus shall be of sufficient rating for power, insulation
and estimated fault current and of sufficient mechanical strength, for the duty cycle which they
may be required to perform under the environmental conditions of installation, and shall be
constructed, installed, protected, worked, and maintained in such a manner as to ensure safety
of human beings, animals and property.

3.5 Regulation12 (2):

Save as otherwise provided in these regulations, the relevant code of practice of The Bureau
of Indian Standards or National Electrical Code, if any, may be followed to carry out the
purposes of this regulation and in the event of any inconsistency, the provisions of these
regulations shall prevail.

3.6 Regulation12 (3):

The material and apparatus used shall conform to the relevant specifications of the Bureau of
Indian Standards or International Electro-Technical Commission where such specifications
have already been laid down.

3.7 Regulation12 (4):

All electrical equipment shall be installed above the Mean Sea level (MSL) as declared by
local Municipal Authorities and where such equipment is to be installed in the basement,
consumer shall ensure that the design of the basement should be such that there is no seepage
or leakage or logging of water in the basement.

Page 411 of
8
3.8 Regulation 3phases Provisions for supply and use of electricityin multistoried building more
than15 meters in height: Regulation36 (3) .The supplier or owner of the installation shall
provide at the point of commencement of supply a suitable isolating device with cut-out
or breaker to operate on all phases except neutral in the 3-phase,4-wire circuit and fixed in a
conspicuous position at not more than1.70meters above the ground so as to completely
isolate the supply to the building in case of emergency.

a) Color Coding for Phase / Live – Red / yellow / Blue

b) Color Coding for Neutral – Black
c) Color Coding for Earth – Green
d) For light / bell wiring shall be two wire system .
e) For ceiling fan / exhaust fan / Separate socket wiring shall be three wire system .

Circuit main for switch boards:-

Circuit main for switch board shall be 3 runs of 2.5sq.mm copper cable i.e for phase,
neutral and Earth. That is from DB to switch board.

Circuit Main for 16A socket :-

Circuit mains for 16A sockets shall be 3 runs 4.0sq.mm from DB to 16A socket. Phase,
neutral and earth conductor are equal in size (i.e sq.mm).

Circuit Main for AC socket:-

Circuit mains for AC socket shall be 3 Runs of 6.0sq.mm from DB to AC socket. Phase,
neutral and earth conductor are equal in size (i.e sq.mm).

Note: Power circuit rated more than 1KW, size as per calculations.
Capacity of Circuits:
I Lighting circuits shall feed light / fan / call bell points. Each circuit shall not have more
than 800W
Connectedload or more than 10 points. In case of LED lights, where load per point may
be less, number of points may be suitably increased.
II Power circuit in NRB will have only one outlet per circuit.

III Each power circuit in residential buildings can feed following outlets.
Not more than 2 No’s 16A socket outlets.
Not more than 4 No’s 6A/ 10A socket outlets.
c) Not more than 1 No 16A & 2Nos 6A out lets.
IV Load more than 1 KW shall be controlled by suitable rated MCB, and cable size shall be
. decided as per the load calculations and length of circuit mains.
V. Load shall be distributed equally among the three phases.

Page 412 of
8
Page 413 of
8
 GOVERNMENT OF ANDHRA PRADESH
ABSTRACT

Mines & Minerals – Amendment to the Rule 10 of the Andhra Pradesh Minor
Mineral Concession Rules, 1966 - Orders – Issued.
---------------------------------------------------------------------------------------
INDUSTRIES AND COMMERCE (M.II) DEPARTMENT

G.O.MS.No. 11 Dated: 11-02-2020

Read the following:

1. G.O.Ms.No.198, Industries & Commerce (M.I) Dept., dt:13.08.2009.

2. GSR No.423 (E), dt:10.02.2015 from the Ministry of Mines,
Govt. of India, New Delhi.
3. G.O.Ms.No.100, Industries & Commerce (M.II) Dept., dt:31.10.2015.
4. G.O.Ms.No.105, Industries & Commerce (M.II) Dept., dt:13.11.2015.
5. G.O.Ms.No.38, Industries & Commerce (M.II) Dept., dt:17.03.2016.
6. G.O.Ms.No.156, Industries & Commerce (M.II) Dept., dt:03.11.2016.
7. G.O.Ms.No.131, Industries & Commerce (M.II) Dept., dt:04.10.2017.
8. G.O.Ms.No.18, Industries & Commerce (M.II) Dept., dt:29.01.2018.
9. G.O.Ms.No.28, Industries & Commerce (M.II) Dept., dt:17.04.2018.
10.G.O.Ms.No.49, Industries & Commerce (M.II) Dept., dt:21.02.2019.
11.Proposal from the Director of Mines & Geology, vide e-fileNo:INC04-
17021(34)/1/2019-PLANNING SEC-DMGreceived by the Government on
dt. 11.12.2019.

***
O R D E R:

After careful examination of the proposal received from the Director of

Mines & Geology, Andhra Pradesh, Ibrahimpatnam in the letter 11th read above,
the Government hereby decided to amend the Rule 10 of Andhra Pradesh Minor
Mineral Concession Rules, 1966 for enhancing the existing Seigniorage fee and
Dead Rent in respect of Minor Minerals.

2. The following notification will be published in the Extra-ordinary issue of the

Andhra Pradesh Gazette, dated:11.02.2020.

NOTIFICATION

In exercise of the powers conferred by sub-section (1) of section 15 of the

Mines & Minerals (Development and Regulation) Act, 1957 (Central Act 67 of
1957), the Governor of Andhra Pradesh hereby makes the following
amendments to the Andhra Pradesh Minor Mineral Concession Rules, 1966
issued in G.O.Ms.No.1172, Industries and Commerce Department, dated.
04.09.1967 and subsequent amended from time to time.

AMENDMENT

In the said rules, under Rule 10 for Schedules I and II, the following shall be
substituted, namely

Page 1 of 8
 “SCHEDULE-I”
RATES OF SEIGNIORAGE FEE

Rate of Seigniorage Fee

Sl. No. Name of the Minor Mineral Units
(in Rupees)
Rs. 145
1 Agate M.T. (Rupees One Hundred and
Forty Five)
Rs. 75
2 Ball Clay M.T.
(Rupees Seventy Five)
3 Barytes
Rs. 480
i. Grey Colour - A Grade M.T. (Rupees Four Hundred and
Eighty)
Rs. 355
ii. Grey Colour - B Grade M.T. (Rupees Three hundred
and Fifty Five)
Rs. 220
iii. Grey Colour - C + D +
M.T. (Rupees Two Hundred and
Waste Grade
Twenty)
Rs. 1,100
iv. White Colour M.T. (Rupees One Thousand
and One hundred)
v. Off Colour Other than Rs. 500
M.T.
Grey (Rupees Five Hundred)
Rs. 90/60
4 Building Stone M3/M.T.
(Rupees Ninety / Sixty)
Rs. 90
5 Calcareous Sand M.T.
(Rupees Ninety)
Rs. 90
6 Calcite M.T.
(Rupees Ninety)
Rs. 90/60
7 Chalcedony Pebbles M3/M.T.
(Rupees Ninety / Sixty)
Rs. 95
8 Chalk M.T.
(Rupees Ninety Five)
Rs. 60
9 China Clay M.T.
(Rupees Sixty)
Rs. 60
10 Clay (Others) M.T.
(Rupees Sixty)
Rs. 120
11 Corundum M.T. (Rupees One Hundred and
Twenty)
Rs. 415
12 Diaspore M.T. (Rupees Four hundred and
fifteen)
Rs.135
Dimensional Stone used for
13 M.T. (Rupees One hundred and
Kerbs& Cubes
Thirty Five)
Rs. 100
14 Dolomite M.T.
(Rupees One Hundred)
Page 2 of 8
 Rs. 60
15 Dunite or Pyroxinite M.T.
(Rupees Sixty)
Rs. 100
16 Feldspar M.T.
(Rupees One hundred)
Rs. 130
17 Felsite M.T. (Rupees One hundred and
thirty)
Rs. 60
18 Fireclay M.T.
(Rupees Sixty)
Rs. 180
19 Fullers Earth/ Bentonite M.T. (Rupees One Hundred and
Eighty)
Rs. 90
20 Fuschite Quartzite M.T.
(Rupees Ninety)
Granite useful for cutting
21
and polishing purpose

Super Mini
Gang Gang
270cm Below
Sawequal and Sawequal and
Item Unit X 150 cm & 75cm
above above
Below size size
300cmx180cm 270cmx150cm
size size
Rs.4600/ Rs.3680/ Rs.1550/
Rs.3450 /
Rs.1415 Rs.1130 Rs.480
Rs.1060
(Rs. Three (Rs. One
(Rs. Three
(Rs. Four thousand six thousand
Black Galaxy M3/ thousand four
thousand six hundred five hundred
Granite Variety MT hundred fifty/
hundred/Rs. eighty/Rs. One fifty/ Rs.
Rs. One
i. One thousand thousand one Four
thousand
four hundred hundred thirty) Hundred
sixty)
fifteen) eighty)
Rs.1150/
Rs.2875/
Rs.3450/ Rs.2700/ Rs.385
Rs.960
Rs.1150 Rs.900 (Rs. One
(Rs. Two
Black Granite (Rs. Three (Rs. Two thousand
M3/ thousand eight
ii. other than thousand four thousand one hundred
M.T. hundred
Galaxy variety fifty/Rs. One Seven fifty/ Rs.
seventy five/Rs.
thousand one hundred / Rs. Three
nine hundred
hundred fifty) Nine hundred) Hundred
sixty)
eighty five)
Colour Granite
Srikakulam Rs.1150/
Rs.3,450/ Rs.2,875/ Rs.2,700/
Blue, Moon Rs.420
Rs.1,255 Rs.1,045 Rs.980
white, River (Rs. One
(Rs. Three (Rs. Two (Rs. Two
white of thousand
M3/ thousand four thousand eight thousand
iii. Visakhapatnam one hundred
M.T. fifty/Rs. One hundred Seven
Dist., Leptinites fifty/ Rs.
thousand two seventy five/Rs. hundred / Rs.
of Coastal Four
hundred fifty One thousand Nine hundred
Dists., Black Hundred
five) forty five) and eighty)
pearl of twenty)
Prakasam and
Page 3 of 8
 Guntur Dists.
Rs.1150/
Rs.2700/ Rs.2470/ Rs.2300 /
Rs.420
Rs.985 Rs.900 Rs.835
(Rs. One
(Rs. Two (Rs. Two (Rs. Two
Colour Granite thousand
M3/ thousand seven thousand four thousand
iv. of other one hundred
M.T. hundred/Rs. hundred three hundred
varieties fifty/ Rs.
Nine hundred seventy/Rs.Nine / Rs. Eight
Four
eighty five) hundred) hundred and
Hundred
thirty five)
twenty)
Rs.1925/ Rs.1650/ Rs.1375 /
Kuppam Grey Rs.1100/
Rs.700 Rs.600 Rs.500
Granite Rs.400
(Rs. One (Rs. One (Rs. One
available in (Rs. One
M3/ thousand nine thousand six thousand and
v. Santhipuram& thousand
M.T. hundred twenty hundred three hundred
Ramakuppam one hundred
five/Rs. Seven fifty/Rs. Six and seventy
mandals of / Rs. Four
hundred) hundred) five/ Rs. Five
Chittoor District Hundred)
hundred)
Rs.1925/ Rs.1650/ Rs.1375 /
Chittoor Rs.1100/
Rs.700 Rs.600 Rs.500
Colour Granit Rs.400
(Rs. One (Rs. One (Rs. One
e (Other than (Rs. One
M3/ thousand nine thousand six thousand
vi. Silver-waves, thousand
M.T. hundred twenty hundred three hundred
Madanapalli one hundred
five/Rs. Seven fifty/Rs. Six seventy five/
white and / Rs. Four
hundred) hundred) Rs. Five
Iscon white) Hundred )
hundred
Rs. 150
22 Gypsum M.T. (Rupees One Hundred and
Fifty)
Rs. 145
23 Jasper M.T. (Rupees One Hundred and
Forty Five)
Rs. 60
24 Kaolin M.T.
(Rupees Sixty)
25 Laterite
i. Dispatched for use in
Rs. 200
Alumina &Aluminium M.T.
(Rupees Two Hundred)
metal extraction
ii. For use other than
Alumina and Rs. 100
M.T.
Aluminium metal (Rupees One Hundred)
extraction and export
Rs. 90
26 Lime Kankar/ Limestone M.T.
(Rupees Ninety)
Rs. 120
27 Lime Shell M.T. (Rupees One Hundred and
Twenty)
Limestone Slabs:
28 Sq.Mt/ M.T. Rs. 10 (Rupees Ten) per
i. Color
Sq.Mtor Rs.120

Page 4 of 8
 (Rupees One Hundred and
Sq.Mt/ M.T.
ii. White Twenty) per MT whichever
is higher
Rs. 6 (RupeesSix) per
Sq.Mtor Rs.110
Sq.Mt/ M.T.
iii. Black (Rupees One Hundred and
Ten) per MT whichever is
higher
Rs. 90/60
29 Manufactured Sand M3/M.T.
(Rupees Ninety / Sixty)
Rs. 300/120
30 Marble M3/M.T. (Rupees Three Hundred /
One Hundred and twenty)
31 Mica -
M.T. Rs. 2,000
i. Crude
(Rupees Two Thousand)
Rs. 750
M.T.
ii. Scrap (Rupees Seven Hundred
and Fifty)
Rs. 45/30
Morrum/ Gravel & Ordinary
32 M3/M.T. (Rupees Forty five /
Earth
Thirty)
Rs. 90
33 Mosaic Chips M.T.
(Rupees Ninety)
Rs. 60
34 Ochre M.T.
(Rupees Sixty)
Ordinary Clay, Silt and Brick Rs. 8,000
Earth used in the (Rupees Eight Thousand)
35
Manufacture of Bricks Per Kiln Per Annum for
including Mangalore Tiles Bricks and Tiles
Rs. 100/ Rs. 66
36 Ordinary Sand M3/M.T. (Rupees One Hundred/Rs.
Sixty Six)
Rs. 200
37 Pyrophillite M.T.
(Rupees Two Hundred)
Rs. 90
38 Quartz M.T.
(Rupees Ninety)
Rs. 90
39 Quartzite M.T.
(Rupees Ninety)
Rs. 35/ Rs. 25
40 Rehmati M3/M.T. (Rupees Thirty five/Twenty
five)
Rs. 90/60
41 Road Metal & Ballast M3/M.T.
(Rupees Ninety / Sixty)

Rs. 90/60
42 Rough Stone/ Boulders M3/M.T.
(Rupees Ninety / Sixty)
Rs. 100
43 Sand (Others) M.T.
(Rupees One Hundred)

Page 5 of 8
 Rs. 180
44 Shale M.T. (Rupees One Hundred and
Eighty)
Rs. 90/60
45 Shingle M3/M.T.
(Rupees Ninety / Sixty)

Rs. 100
46 Silica Sand M.T.
(Rupees One Hundred)
Rs. 175
47 Slate M.T. (Rupees One hundred and
Seventy five)
48
Steatite or Talc or
Soapstone

M.T. Rs. 100

i. Filler Grade
(Rupees One Hundred)
Rs. 550
M.T.
ii. Other Grade (Rupees Five hundred and
Fifty)

SCHEDULE-II

RATES OF DEAD RENT

Rate of Dead Rent per

S.No Name of the Minor Mineral hectare per annum
(In Rupees)
Rs. 1,30,000/-
Black Galaxy Granite and Black
1 (Rs. One Lakh Thirty
Granite
Thousand)
Rs. 1,30,000/-
2 All Colour Granite varieties (Rs. One Lakh Thirty
Thousand)
Limestone other than classified as
major minerals used for lime
burning for Building construction
purposes, marble, boulders,
building stone including stone used
for Road Metal, Ballast, Rs. 65,000/-
3
Manufactured sand, concrete & (Rs. Sixty Five thousand)
other construction purpose, Shale,
Slate &Phyllites, Mosaic Chips,
Fullers Earth/Bentonite &
Dimensional Stone used for Cubes
and Kerbs
Gravel, Morrum, Ordinary Earth,
Shingle, Limestone Slabs used for
flooring purpose Limekankar, Rs. 52,000/-
4 ChalcedonyPebbles used in the (Rs. Fifty two
building purpose Limeshell for thousand)
burning used for building purpose
and Rehmati.
5 Barytes and Laterite Rs. 26,000/-
Page 6 of 8
 (Rs. Twenty Six Thousand)
Agate, Corundum, Diaspore and Rs. 20,000/-
6
Fluorite (Rs. Twenty Thousand)
Rs. 15,000/-
7 Mica
(Rs. Fifteen Thousand)
All minor minerals which are not
Rs. 20,000/-
8 covered under Serial number 1 to
(Rs. Twenty Thousand)
7 above.

3. This order shall come in to force with immediate effect.

4. This order issues with the concurrence of Finance Department vide

their U.O. No. FMU0ASD(IC)/111/2019-FMU-IIEIC, dt.09.01.2020 (Computer No.1063684).

[BY ORDER AND IN THE NAME OF THE GOVERNOR OF ANDHRA PRADESH]

K. RAMGOPAL
PRINCIPAL SECRETARY TO GOVERNMENT (MINES)
To
The Commissioner of Printing, Stationary & Stores Purchase (Ptg. Wing),
Vijayawada. (He is requested to publish the above Notification in the
Extra-ordinary issue of Andhra Pradesh, and arrange to send
1000 copies of the same to Govt. Ind. & Com. (M.II) Department).
The Director of Mines & Geology, Andhra Pradesh, Ibrahimpatnam.
The Chief Executive Officer, SERP, Vijayawada.
All the Joint Director /Deputy Director / Asst. Director of Mines & Geology through the
Director of Mines & Geology, Ibrahimpatnam.
Copy to:
The Secretary to Govt, Ministry of Mines, Govt. of India, Shastry Bhawan, New Delhi.
The Law Department. / The Finance Department.
The P.S to Minister for Mines & Geology. / The PS to Prl. Secretary to Govt., (Mines).
SF/SC (e-file No.INC04-17021(34)/1/2019-PLANNING SEC-DMG, Comp. No.1052464)

Page 7 of 8