Home Log Out Menu

Test Results

Your Score

0%
(0/88)
Pass mark is 75%

Test Summary
Type: Sequential

Module: 04 (Electronic Fundamentals)

Sub-sections: 1.3b,

In the Boolean algebra statement below, the gate described is

F = A.B.C
1.

Your Answer: (No Answer Given) INCORRECT

Correct Answer: And

This question has been asked 4692 times with a success rate of 87 percent.

A.B.C represents an AND gate.

Comment/Reference:

Report problem
with question

Send your reference

2. An increase in negative feedback to an OP AMP will result in

Your Answer: (No Answer Given) INCORRECT

Correct Answer: reduced distortion

This question has been asked 2505 times with a success rate of 71 percent.
 (No Comment/Reference Available)
Comment/Reference:

Report problem
with question

Send your reference

Which kind of operational amplifier is shown in the figure?

3.

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Integrator

This question has been asked 1385 times with a success rate of 76 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

4. What is the average gain of an Op Amp?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 200,000

This question has been asked 6109 times with a success rate of 75 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question
Send your reference

5. What is meant by a bistable circuit?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: The circuit has 2 stable states and will stay in which one it is p

This question has been asked 4616 times with a success rate of 84 percent.

A bistable circuit has 2 stable states and i

time.
Comment/Reference:

Report problem
with question

Send your reference

6. What type of amplifier coupling is most useful for impedance matching?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Inductive

This question has been asked 2780 times with a success rate of 66 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

7. A non-inverting op-amp
Your Answer: (No Answer Given) INCORRECT

Correct Answer: has a non-inverting input connection only

This question has been asked 4883 times with a success rate of 75 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

8. When an Op Amp is used as a Voltage Follower

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Vout is equal to Vin

This question has been asked 2788 times with a success rate of 72 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

What gate does the following Boolean expression represent

F = A.B.C
9.

Your Answer: (No Answer Given) INCORRECT

Correct Answer: AND

This question has been asked 4727 times with a success rate of 84 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question
Send your reference

10. The purpose of an offset null lead in an OP-AMP IC is to:

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Adjust the output to zero when the input is zero

This question has been asked 6249 times with a success rate of 71 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

A 4 input amp has 2kohms on each input and 2 kohms output. What is the
11.
gain?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 1

This question has been asked 4173 times with a success rate of 71 percent.

2/2
Comment/Reference:

Report problem
with question

Send your reference

12. What is required for the switching of a monostable multivibrator?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: One trigger pulse to both switch on and off

This question has been asked 6215 times with a success rate of 67 percent.

Monostable multivibrators can remain onl

permanently. When an external trigger pu
circuit moves from its permanent stable s
Comment/Reference: after a short while.

Report problem
with question

Send your reference

Infinite gain, infinite input impedance and zero output impedance is

13.
characteristic of a

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Op amp

This question has been asked 4728 times with a success rate of 86 percent.

Infinite gain, infinite input impedance and

are characteristics of the ideal op amp.
Comment/Reference:

Report problem
with question

Send your reference

If an amp has 2 stages of amplification, one of 3db and another of 6db, th

14.
total gain is

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 9db

This question has been asked 3803 times with a success rate of 73 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

The amplifier coupling method most likely to give a good frequency respo
15.
is

Your Answer: (No Answer Given) INCORRECT

Correct Answer: direct coupling

This question has been asked 2851 times with a success rate of 57 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

16. Which type of flip flop has only 1 data input?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: D

This question has been asked 6223 times with a success rate of 76 percent.

The D type Flip Flop has only 1 input (bes

Comment/Reference:

Report problem
with question

Send your reference

A device which has a high input impedance, low output impedance and hig
17.
voltage gain is a
Your Answer: (No Answer Given) INCORRECT

Correct Answer: Op-Amp

This question has been asked 5034 times with a success rate of 86 percent.

This is the definition of an Op-Amp

Comment/Reference:

Report problem
with question

Send your reference

18. Components on an integrated circuit are

Your Answer: (No Answer Given) INCORRECT

Correct Answer: on the surface

This question has been asked 6439 times with a success rate of 70 percent.

Components on an integrated circuit are o

substrate.
Comment/Reference:

Report problem
with question

Send your reference

The voltage supply to a modern Complementary Metal Oxide Semiconduct

19.
(CMOS) integrated circuit must be

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 3V to 18V DC

This question has been asked 6239 times with a success rate of 64 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

 20. How many terminals has a 741 operational amplifier?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 8

This question has been asked 1931 times with a success rate of 78 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

21. When a synchro system is in correspondence, its transmitter and receiver

Your Answer: (No Answer Given) INCORRECT

Correct Answer: are in phase

This question has been asked 4668 times with a success rate of 77 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

22. On a three input NAND gate, A=0 and B=1 and C=1. The output is

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 1

This question has been asked 719 times with a success rate of 75 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

23. Two diodes, both forward biased, connected in parallel would act like

Your Answer: (No Answer Given) INCORRECT

Correct Answer: an OR gate

This question has been asked 4687 times with a success rate of 75 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

Which of the following multivibrators has its own PULSE-REPETITION-

24.
FREQUENCY (PRF)?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Astable

This question has been asked 6336 times with a success rate of 70 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

 25. A ratiometer is used with

Your Answer: (No Answer Given) INCORRECT

Correct Answer: a linear indication scale

This question has been asked 4036 times with a success rate of 67 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

26. A disadvantage of negative feedback in an amplifier is that it may

Your Answer: (No Answer Given) INCORRECT

Correct Answer: decrease gain

This question has been asked 3049 times with a success rate of 68 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

The input resistance to an inverting op-amp is 100 Ohms. The feedback

27.
resistance is 100 kilohms. What is the amplifier gain?
Your Answer: (No Answer Given) INCORRECT

Correct Answer: -1000

This question has been asked 6249 times with a success rate of 65 percent.

Gain = Feedback/input resistance = 100,0

because it is inverting)
Comment/Reference:

Report problem
with question

Send your reference

What type of gate is an OR gate with both inverted inputs and inverted
28.
outputs?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: AND gate

This question has been asked 4623 times with a success rate of 71 percent.

An AND gate can be made by inverting bo

output of an OR gate
Comment/Reference:

Report problem
with question

Send your reference

29. When an Op Amp is used as a Voltage Follower, the feedback must be

Your Answer: (No Answer Given) INCORRECT

Correct Answer: unity

This question has been asked 2833 times with a success rate of 65 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question
Send your reference

30. A disadvantage of positive feedback in an amplifier is that it may

Your Answer: (No Answer Given) INCORRECT

Correct Answer: increase signal distortion

This question has been asked 2975 times with a success rate of 71 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

31. The semiconductor substrate used in 'chips' is most commonly

Your Answer: (No Answer Given) INCORRECT

Correct Answer: silicon

This question has been asked 6077 times with a success rate of 89 percent.

Silicon is most commonly used

Comment/Reference:

Report problem
with question

Send your reference

32. A single integrated circuit Op Amp has how many pins?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 8

This question has been asked 6276 times with a success rate of 82 percent.

Inverting and non-inverting input, output

supply, two offset null connections (for a
leg not used = 8. Aircraft Electricity and E
Comment/Reference: Eismin Page 140

Report problem
with question

Send your reference

This is a diagram of a

33.

Your Answer: (No Answer Given) INCORRECT

Correct Answer: integrator

This question has been asked 6325 times with a success rate of 75 percent.

An integrator has the capacitor in the feed

op amp.
Comment/Reference:

Report problem
with question

Send your reference

34. What are the ideal characteristics of an Op Amp?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Infinite gain, infinite input Impedance and zero output impedan

This question has been asked 4736 times with a success rate of 86 percent.
 (No Comment/Reference Available)
Comment/Reference:

Report problem
with question

Send your reference

35. When you use an op amp as a buffer it has

Your Answer: (No Answer Given) INCORRECT

Correct Answer: high input impedance and low output impedance

This question has been asked 6368 times with a success rate of 68 percent.

An op amp is characterised by its high inp

output impedance. Aircraft Electricity and
Comment/Reference: Eismin Page 288

Report problem
with question

Send your reference

36. What oscillating frequency has an astable multivibrator?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Equal its free running frequency

This question has been asked 6000 times with a success rate of 69 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

 37. Which of the following statements is true?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Negative feedback is used in amplifiers

This question has been asked 6404 times with a success rate of 71 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

38. A monostable vibrator

Your Answer: (No Answer Given) INCORRECT

is switched on by a trigger pulse then within a pre-set time wil

Correct Answer:
eventually return to its original state

This question has been asked 6547 times with a success rate of 63 percent.

A monostable vibrator is switched on by a

within a pre-set time will eventually retur
Comment/Reference:

Report problem
with question

Send your reference

39. Op amps use what power supply?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 5 - 15 VDC

This question has been asked 6174 times with a success rate of 78 percent.

Comment/Reference: Power supplies vary from op-amp to op-a

manufacturer) but most are +/- 5v to +/-
Report problem
with question

Send your reference

On an integrated circuit the hole in the top left corner is pin 1. The pins ar
40.
counted

Your Answer: (No Answer Given) INCORRECT

Correct Answer: anticlockwise

This question has been asked 6193 times with a success rate of 83 percent.

On an IC the pins are counted anti-clockw

and Electronics 5th Edition Eismin Page 1
Comment/Reference:

Report problem
with question

Send your reference

41. In an integrated circuit, the components are mounted

Your Answer: (No Answer Given) INCORRECT

Correct Answer: by means of wires connecting them

This question has been asked 4913 times with a success rate of 68 percent.

A thin film of aluminium is coated over th

surface of the IC to make the wire conduc
Comment/Reference:

Report problem
with question

Send your reference

 The output of the circuit shown will be

42.

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 0V

This question has been asked 4721 times with a success rate of 79 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

43. The input terminals of an operational amplifier are called

Your Answer: (No Answer Given) INCORRECT

Correct Answer: the inverting and non-inverting inputs

This question has been asked 4521 times with a success rate of 86 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

44. What is the output of the amplifier shown?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 5V

This question has been asked 6115 times with a success rate of 83 percent.

A basic adding op-amp. 4 + 0 + 1 = 5

Comment/Reference:

Report problem
with question

Send your reference

45. Pin 3 on an op-amp has a + symbol. This designates

Your Answer: (No Answer Given) INCORRECT

Correct Answer: non-inverting input

This question has been asked 6212 times with a success rate of 71 percent.

Pin 3 of a 741 Op-Amp (for example) is th

Comment/Reference:

Report problem
with question

Send your reference

46. The negative feedback for an op-amp integrator is connected across a

Your Answer: (No Answer Given) INCORRECT

Correct Answer: capacitor

This question has been asked 6183 times with a success rate of 70 percent.
 (No Comment/Reference Available)
Comment/Reference:

Report problem
with question

Send your reference

47. An integrated circuit is manufactured by

Your Answer: (No Answer Given) INCORRECT

Correct Answer: doping impurities into layers of intrinsic material

This question has been asked 6414 times with a success rate of 72 percent.

Aircraft Instruments and Integrated Syste

149/150
Comment/Reference:

Report problem
with question

Send your reference

What is the output of an ideal Op Amp if both input connections are shorte
48.
together?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Zero

This question has been asked 6132 times with a success rate of 84 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

 49. A differential op-amp is used for

Your Answer: (No Answer Given) INCORRECT

Correct Answer: AC and DC current gain

This question has been asked 7677 times with a success rate of 76 percent.

http://en.wikipedia.org/wiki/Operational_
Comment/Reference:

Report problem
with question

Send your reference

50. Positive feedback in an Op Amp

Your Answer: (No Answer Given) INCORRECT

Correct Answer: reduces stability

This question has been asked 6456 times with a success rate of 57 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

51. An advantage of positive feedback in an amplifier is that it will

Your Answer: (No Answer Given) INCORRECT

Correct Answer: increase gain

This question has been asked 2886 times with a success rate of 72 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question
Send your reference

This is a diagram of a

52.

Your Answer: (No Answer Given) INCORRECT

Correct Answer: differentiator

This question has been asked 6182 times with a success rate of 74 percent.

A differentiator uses a resistor in the feed

amp.
Comment/Reference:

Report problem
with question

Send your reference

53. An astable multivibrator

Your Answer: (No Answer Given) INCORRECT

Correct Answer: is an oscillator

This question has been asked 776 times with a success rate of 76 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

 54. The Offset Null in an Op-Amp is connected between pins

Your Answer: (No Answer Given) INCORRECT

Correct Answer: 1 and 5

This question has been asked 972 times with a success rate of 72 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

55. If feedback is reduced in an op amp it would

Your Answer: (No Answer Given) INCORRECT

Correct Answer: increase gain

This question has been asked 4845 times with a success rate of 64 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

56. In an integrated circuit, the components are mounted by

Your Answer: (No Answer Given) INCORRECT

Correct Answer: metal oxide film etched onto the surface

This question has been asked 6227 times with a success rate of 63 percent.

Aircraft Electricity and Electronics 5th Edit

Comment/Reference:

Report problem
with question

Send your reference

In an electronic circuit with an operational amplifier connected in the pus

57.
pull configuration, the circuit

Your Answer: (No Answer Given) INCORRECT

Correct Answer: utilizes both sides of the input signal

This question has been asked 6215 times with a success rate of 81 percent.

During the positive portion of the AC inpu

follower drives the output, and during the
Comment/Reference: drives the output.

Report problem
with question

Send your reference

58. Which type of multivibrator is used on a "switch-debounce" circuit?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Bistable

This question has been asked 1021 times with a success rate of 55 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

 In an operational amplifier, the two input waves are the same amplitude,
59.
same frequency, but exactly anti-phase. What would the output be?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Double

This question has been asked 4743 times with a success rate of 68 percent.

Although the input waves are anti-phase,

the op amp inverts one of the inputs, so t
Comment/Reference: add to each other.

Report problem
with question

Send your reference

What gate does the following Boolean expression represent

F = A+B+C
60.

Your Answer: (No Answer Given) INCORRECT

Correct Answer: OR

This question has been asked 4740 times with a success rate of 85 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

 61. A VLS IC has

Your Answer: (No Answer Given) INCORRECT

Correct Answer: more than 10,000 gates

This question has been asked 6394 times with a success rate of 76 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

62. A disadvantage of resistor coupled amplifier stages is

Your Answer: (No Answer Given) INCORRECT

Correct Answer: reduced efficiency

This question has been asked 3008 times with a success rate of 59 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

In a differential Op Amp, if the voltage, frequency and amplitude are the

63.
same on both inputs, the output will be
Your Answer: (No Answer Given) INCORRECT

Correct Answer: zero

This question has been asked 4828 times with a success rate of 75 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

64. A logic circuit with more than one gate will have

Your Answer: (No Answer Given) INCORRECT

Correct Answer: one of 2 states of logic output

This question has been asked 5057 times with a success rate of 80 percent.

Logic circuit outputs are either 0 or 1, reg

of gates in the circuit.
Comment/Reference:

Report problem
with question

Send your reference

65. In an operational amplifier the output

Your Answer: (No Answer Given) INCORRECT

will be inverted if the inverting input is used with the non-inver

Correct Answer:
input grounded

This question has been asked 4775 times with a success rate of 76 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

 When an Op Amp is used as a Comparator, the difference between the inp
66.
voltages will be

Your Answer: (No Answer Given) INCORRECT

Correct Answer: amplified

This question has been asked 2837 times with a success rate of 62 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

67. The + symbol on an Op-amp is for the

Your Answer: (No Answer Given) INCORRECT

Correct Answer: non-inverting input

This question has been asked 783 times with a success rate of 78 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

68. An astable multivibrator is

Your Answer: (No Answer Given) INCORRECT

Correct Answer: a free running vibrator

This question has been asked 6330 times with a success rate of 72 percent.

An astable multivibrator flips on/off contin

a power supply
Comment/Reference:

Report problem
with question

Send your reference

69. What does the output voltage of an op-amp depend upon?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: The resistors in the circuit

This question has been asked 4614 times with a success rate of 69 percent.

The output of an op-amp is controlled by

circuit.
Comment/Reference:

Report problem
with question

Send your reference

70. What class of amplifier is most efficient for a radio power amplify stage?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: C

This question has been asked 2802 times with a success rate of 50 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

 71. Inductive (transformer) coupling of amplifier stages will

Your Answer: (No Answer Given) INCORRECT

Correct Answer: provide maximum power transfer

This question has been asked 2903 times with a success rate of 67 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

72. The abbreviation D.I.P. in relation to ICs means

Your Answer: (No Answer Given) INCORRECT

Correct Answer: dual in-line package

This question has been asked 1364 times with a success rate of 72 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

73. Why is a clock input needed on a flip flop?

Your Answer: (No Answer Given) INCORRECT

 To set the output to assume a state, dependent on the controll
Correct Answer:
input

This question has been asked 751 times with a success rate of 62 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

Comparing a signal amplifier cascode with a single-stage amplifier, the

74.
cascode has

Your Answer: (No Answer Given) INCORRECT

Correct Answer: improved input / output isolation

This question has been asked 3065 times with a success rate of 63 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

75. A momentary input at the reset input of a flip flop will

Your Answer: (No Answer Given) INCORRECT

Correct Answer: reset the true output to 0

This question has been asked 6394 times with a success rate of 74 percent.

Comment/Reference: When the value on reset (R) is 1, the valu

vice versa.
Report problem
with question

Send your reference

 76. An Op Amp is used for which type of amplification?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: AC or DC

This question has been asked 4922 times with a success rate of 82 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

77. How are the pins numbered on an op-amp IC?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: counter clockwise from the dot

This question has been asked 6287 times with a success rate of 81 percent.

Pins on an IC are always numbered count

dot. Aircraft Electricity and Electronics 5th
Comment/Reference: 140

Report problem
with question

Send your reference

78. In an integrated circuit, the components are inserted

Your Answer: (No Answer Given) INCORRECT

Correct Answer: by doping in successive layers

This question has been asked 6155 times with a success rate of 82 percent.

An integrated circuit is produced by mask

and N component successively. Aircraft El
Comment/Reference: 5th Edition Eismin Page 121

Report problem
with question

Send your reference

79. An Operational Amplifier can be used in

Your Answer: (No Answer Given) INCORRECT

Correct Answer: D.C and A.C systems

This question has been asked 3693 times with a success rate of 81 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

80. The gain of an operational amplifier with an increase in signal frequency

Your Answer: (No Answer Given) INCORRECT

Correct Answer: decreases

This question has been asked 1464 times with a success rate of only 49 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

 81. A miniature circuit that is etched onto a piece of silicon is called

Your Answer: (No Answer Given) INCORRECT

Correct Answer: an integrated circuit

This question has been asked 5024 times with a success rate of 88 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

82. Inductive-Resistive (IR) amplifier stage coupling will

Your Answer: (No Answer Given) INCORRECT

Correct Answer: provide good power transfer due to optimum impedance match

This question has been asked 2812 times with a success rate of 71 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

In a semiconductor integrated circuit, components are typically

83.
manufactured from
Your Answer: (No Answer Given) INCORRECT

Correct Answer: silicon

This question has been asked 4766 times with a success rate of 89 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

84. In a parallel AC circuit with a capacitor and inductor, impedance will be

Your Answer: (No Answer Given) INCORRECT

Correct Answer: high

This question has been asked 4970 times with a success rate of 72 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

85. Capacitor coupling of amplifier stages will

Your Answer: (No Answer Given) INCORRECT

Correct Answer: reduce low frequency signals

This question has been asked 2906 times with a success rate of 57 percent.

Comment/Reference: (No Comment/Reference Available)

Report problem
with question

Send your reference

 86. What is the most accurate type of frequency measuring instrument?

Your Answer: (No Answer Given) INCORRECT

Correct Answer: Integrated circuit chip having a clock circuit.

This question has been asked 6298 times with a success rate of 81 percent.

Comment/Reference:

Report problem
with question

Send your reference

87. An advantage of negative feedback in an amplifier is that it will

Your Answer: (No Answer Given) INCORRECT

Correct Answer: reduce signal distortion

This question has been asked 2904 times with a success rate of 76 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

88. An OP AMP used as a "Differentiator"

Your Answer: (No Answer Given) INCORRECT

 Correct Answer: has the input fed via a capacitor

This question has been asked 6157 times with a success rate of 65 percent.

(No Comment/Reference Available)

Comment/Reference:

Report problem
with question

Send your reference

Buy the TTS Study Notes for Module 4

High quality study notes for Module 4 from Total Training Support. Available in printed hard-copy or ebook
format.

Module 4 Study Notes - Printed Hard Copy

Delivered to your home, anywhere, worldwide.

Module 4 Study Notes - Ebook Format

Instant access on your PC, tablet or phone.

Privacy Policy
Terms and Conditions
Equal Opportunities and Diversity
Quality Policy
Contact

Copyright © 2024 Total Training Support. All Rights Reserved.

LOADING...