Scribd
Upload
36 views6 pages

Aramco Examination For Lab Technician-Wh-All Mix Question (Model)

Uploaded by

Irfan Pathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
36 views6 pages

Aramco Examination For Lab Technician-Wh-All Mix Question (Model)

Uploaded by

Irfan Pathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

ARAMCO EXAMINATION

QUESTION AND ANSWER

ALL TEST MATERIALS


?What is the required time to complete the sampling of concrete.1

.Minutes 15 *

?What is the right temperature of water to stock the sample.2

C ° 2 ± 23 *

How many grams of calcium hydroxide per liter to mix in water for.3

?concrete curing tank

.grams/liter 3 *

?What is the purpose of mixing calcium hydroxide in the water.4

.To saturate the water to prevent leaching of concrete *

?What is the temperature of sulfur compound to get fire.5

C ° 227 *

?What is the correct temperature in heating sulfur compound.6

to 143 ° C 129 *

What is the requirement time before testing the concrete .7

?compressive strength after capping

Hours ( Less then 5000 psi) 2 *

?What is the standard method test for slump test.8

ASTM C 143 *
?Give three important tools use in slump test.9

.Slump cone *

.Tamping rod *

.Measuring tape *

.Base Plate. & * Scoop *

?How much time of remove slump cone during slump test.10

seconds 2 ± 5 *

Explain briefly how to determine the slump test, What instrument.11

?you will use

.Slump cone *

.layers place in slump cone 3 *

. Each layers 25 Roding *

. After complete Roding top surface take level *

.Lifting cone to upward direction (5 ± 2 seconds) *

Set empty slump cone upside down and place tamping rod *

.on the cone

Take slump of concrete measurement by use with measuring *

.tape

What is the right temperature of fresh concrete in site during .12

?concrete pouring as per Aramco standard


C (as per Aramco standard)° 32 ± 30 *

?What is the standard of ASTM for making and curing.13

ASTM C 31 *

?Give three important Apparatus in making concrete sampling.14

.Concrete mold *

.Tamping rod *

.Scoop *

. Rubber hummer *

?What is the standard or measurement of concrete cylinder mold.15

diameter & 12" height "6 *

?What is the standard or measurement of concrete cube mold.16

X 6" X 6" ( Cube ) "6 *

Who is the responsible person in taking and curing of concrete .17

?sample

.Concrete Technician *

How many layers required and numbers of Roding for 6" inches .18

?diameter the mold

.layers Each 25 Roding 3 *

How many Hours required the concrete cylinder mold stored in .19

?cool place before curing in the tank

.to 27 ° C 16 *
If the sample required strength 6000 PSI what is the required .20

?temperature in curing

.to 26 ° C 20 *

What is the required minimum time sample should be .21

?transported

.Hours after final setting time 8 *

.Hours Maximum transport from site to laboratory 4 *

During soundness test how many hours immersion solution with .22

samples
to 18 Hours 16

What is the range of specific gravity of solution for sodium sulfate .23

?of soundness test

to 1.174 1.151

What is the right temperature to maintain during soundness of .24

?solution

C ° 1 ± 21

What is the range of specific gravity of solution for magnesium .25

?sulfate of soundness test

to 1.308 1.295

?How many cycle solution use for soundness test .26

cycles 5
How many is required to prepare the solution magnesium sulfate .27

?and magnesium sulfate before using test

Hours (Minimum) 48 *

What is the required temperature of the solution use in sand .28

?equivalent test

C ° 1 ± 21 *

?How you prepare magnesium sulfate solution for soundness test.29

g of anhydrous salt per/ ( 1 liter Distilled water ) 350 *

OR
* 1230 g of the heptahydrate per litre of water are sufficient for
saturation at 73.4°F (23°C) However.

?How you prepare sodium sulfate solution for soundness test.30

g of anhydrous salt/ ( 1 liter Distilled water ) 215 *

OR
* 700 g of the decahydrate per litre of water are sufficient for
saturation at
71.6°F (22°C) However.

What is the height to maintain for sand equivalent test table to .31

?solution

.Feet's( 36 " inches) or 900 mm 3*

What is the speed if mechanical shaker is use in sand equivalent .32

?test
CPM (Cycle Per Minute) 2 ± 175*

What is the required number of cycles is needed when using .33

?manual shaker for sand equivalent test

Cycles 45 ± 5 seconds 100*

What is the required number of cycles is needed when using .34

?Hands shaker for sand equivalent test

.Shake the cylinder 90 cycles in approximately 30 seconds *

using a throw of 23 ± 3 cm (9 ± 1 in.) *


What is the required temperature of sample when drying before .35

?sand equivalent test

C ° 5 ± 110 *

After put sample in plastic cylinder tube how many minutes .36

?waiting for shacking for sand equivalent test

minutes 10*

What is the required mix of calcium chloride solution for sand .37

?equivalent test

.ml for ( 1galon -3.8 Liters) 85 *

You might also like