P350-M0_062015

Hand Pump
Instruction Manual
MODELS: P350, P601S, P1000, P1000AD & P2001
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Maximum Operating Pressure 10,000 PSI

Models P350 Model P601S

Model P1000 &P1000AD Model P2001

! This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.

Printed in Taiwan
 SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an
understanding of this product and safe operating procedures before attempting to use this product. Instructions and safety information
shall be conveyed in operator’s native language before use of this product is authorized. Make certain that the operator thoroughly
understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as to the safe and proper use
of this product as outlined in this factory authorized manual, remove from service immediately.
Inspect before each use. It is recommended that, prior to each use, an inspection be done by qualified personnel and that any missing
or damaged parts, decals, warning/safety labels or signs be replaced with factory authorized replacement parts only. Any pump that
appears to be damaged in any way, is worn, leaking or operates abnormally shall be removed from service immediately until such time
as repairs can be made. Owners and operators of this equipment shall be aware that the use and subsequent repair of this equipment
may require special training and knowledge.

PRODUCT DESCRIPTION
BVA Hydraulic Hand Pumps are engineered to meet most industrial standards for performance and safety. P1000RP has a unique two-
stage hydraulic circuit which allows quick displacement of hydraulic fluid under no load conditions and easy pumping in loaded conditions.
These lever operated pumps supply compressed hydraulic fluid to compatible applications i.e. rams, presses, spreaders, compactors
and crimping machines, anywhere that 10,000 PSI of fluid pressure is needed. Special skill, knowledge and training may be required for
a specific task and the product may not be suitable for all the jobs described above. Unsuitable applications would include applications
that call for a device to move, level or support persons, animals, hazardous materials, mobile homes/dwellings in general, mirrors and/
or plate glass, and/or to connect/secure hatches, components, etc. between bulkheads. The user must ultimately make the decision
regarding suitability of the product for any given task and assume the responsibility of safety for himself/herself and others in the work area.

WARNING: Always check connections before using. Alteration of these products is strictly prohibited. Use only those adapters
! and attachments provided and approved by the manufacturer.
WARNING: To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure of each pressurized
! attachment be equal to or greater than the rated working pressure developed by the hydraulic pump
WARNING: Model P601S is operated with a non-vented reservoir. If the reservoir is subjected to high pressure, the casing may
rupture. Never attempt to return more oil to the reservoir than it is capable of holding
!
Oil Outlet Port
Handle Lock Latch 3/8” - 18NPTF
Oil Outlet Port Handle
1/4ʺ-18NPTF (P350)
Handle 3/8ʺ -18NPTF (P1000)

Release Valve

Spring Loaded Release Valve

Reservoir Handle Lock Pin
Oil Filler Plug Reservoir

Oil Filter Screw

Figure 1 - Model P350 Components

Figure 2 - Model P601S Compnents

Oil Outlet Port Oil Outlet Port

3/8ʺ -18NPTF 3/8ʺ -18NPTF
Handle Handle

Release Valve

Spring Loaded
Handle Lock Pin Vent Screw
Reservoir
Reservoir
Vent Plug

Figure 3 - Model P1000 & P1000AD Components Figure 4 - Model P2001 Components

2
 SPECIFICATIONS
Oil
Pressure Mounting
Usable Displacement
Used Rating Operating Plate
Oil Pump per Stoke Pump Size Weight
Model with (psi) Force Holes
Capacity Type (in3) (L x W x H) (lbs)
Cylinder (lbs) Distance
(in3) 1st 2nd 1st 2nd (in)
stage stage stage stage
Two
P350 21.3 200 0.18 0.05 88 2.56 14.1 x 3.4 x 5.9 6.6
speed
Single
P601S 36.5 Single 0.15 109 3.74 20.8 x 5.2 x 6.5 13.0
speed 10,000
Acting
P1000
61.0 Two 99 3.94 20 x 4.9 x 6.3 13.7
P1000AD 200 0.81 0.14
speed
P2001 122.0 95 2.56 24.3 x 4.8 x 6.9 24.2

! WARNING
• Study, understand, and follow all • Never attempt to disconnect hydraulic connections under
instructions provided with and on this pressure. Release all line pressure before disconnecting hoses.
device before use. • Use only approved accessories and approved hydraulic fluid.
• All WARNING statements must be • Never attach ANY component not authorized by manufacturer.
carefully observed to help prevent • Always ensure that the chosen application is stable to work on
personal injury. and around.
• No alteration shall be made to this • Do not connect to application which can return more oil to the
device. reservoir than the pump reservoir can hold.
• Always wear protective gear when • Do not connect pump to hydraulic system powered by another pump.
operating hydraulic equipment. • This device is not suitable for use as support device! As
• Keep hydraulic equipment away from the system load is lifted, use blocking and cribbing to guard
flames and heat. Hydraulic fluid can against a falling load.
ignite and burn. Do not operate if leaks • All personnel must be clear before lowering load or
are detected. depressurizing the system.
• Crush Hazard. Keep hands and feet • Never try to disassemble a hydraulic cylinder, refer repairs to
away from loading area. Avoid pinch qualified, authorized personnel.
points or crush points that can be
created by the load, cylinder, or any HYDRAULIC HOSES & FLUID TRANSMISSION LINES
equipment of system. • Avoid short runs of straight line tubing. Straight line runs do
• To avoid crushing and related injuries: not provide for expansion and contraction due to pressure
NEVER work on, under or around a and/or temperature changes.
lifted load before it is properly supported • Reduce stress in tube lines. Long tubing runs should be supported
by appropriate mechanical means. by brackets or clips. Before operating the pump, tighten all hose
Never rely on hydraulic pressure alone connections with proper tools. Do not overtighten. Connections
to support load. should only be tightened securely and leak-free. Overtightening can
HYDRAULIC PUMPS cause premature thread failure or high pressure fittings to burst.
• The user must be a qualified operator familiar with the correct • Should a hydraulic hose ever rupture, burst or need to be
operation, maintenance, and use of pumps. Lack of knowledge disconnected, immediately shut off the pump and release all
in any of these areas can lead to personal injury. pressure. Never attempt to grasp a leaking pressurized hose with
• Do not exceed rated capacity of the pump or any equipment in your hands. The force of escaping hydraulic fluid can inflict injury.
the system. • Do not subject the hose to potential hazard such as fire, sharp
• Never attempt to lift a load weighing more than the capacity of objects, extreme heat or cold, or heavy impact.
the cylinder. • Do not allow the hose to kink, twist, curl, crush, cut or bend so
• Do not subject the pump and its components to shock loads. tightly that the fluid flow within the hose is blocked or reduced.
• Burst hazard exists if hose or connection pressure exceeds Periodically inspect the hose for wear.
rated pressure. • Do not pull, position or move setup by the hose.
• Inspect pump, cylinder, hoses and connections before each use • Hose material and coupler seals must be compatible with
to prevent unsafe conditions from developing. Do not use if they hydraulic fluid used. Hoses also must not come in contact with
are damaged, altered or in poor condition. Do not operate the corrosive materials such as battery acid, creosote-impregnated
system with bent or damaged coupler or damaged threads. objects and wet paint. Never paint a coupler or hose.
• Never hold or stand directly in line with any hydraulic connections • FAILURE TO HEED THESE WARNINGS MAY RESULT IN
while pressurizing. PERSONAL INJURY AS WELL AS PROPERTY DAMAGE.
• Use gauge or other load measuring instrument to verify load.

3
 BEFORE USE
1. Before using this product, read the instruction manual completely
and familiarize yourself thoroughly with the product, its
components and recognize the hazards associated with its use.
2. Verify that the product and the application are compatible.
Inspect before each use. Do not use if bent, broken, leaking or
damaged components are noted.
3. Replace worn or damaged parts and assemblies with Figure 5 - Pull spring loaded lock Figure 6 - Remove shipping plug
BVA Hydraulics Authorized Replacement Parts only (See pin, pivot toward rear to unlock and replace with air vent plug
Replacement Parts Section). Lubricate as instructed in pump handle. before initial use.
Maintenance Section.
4 Ensure method of confirming load is accurate and working a)
properly. Have gauge or load cell accuracy verified by qualified
personnel on a yearly basis.
5. Pumps should be stored where protected from the elements,
abrasive dust, and damage. Pumps can be stored horizontally
b)
or vertically.

SET UP
! WARNING: The pump’s maximum working pressure is
10,000 PSI. Make sure that all hydraulic equipment such as Figure 7 - Pull stem upward Figure 8 - Pull stem upward
cylinders, hoses, couplers and etc. used with this pump are before use, press down when before use, press down when
rated at 10,000 PSI operating pressure or more. moving or storing pump. moving or storing pump.

1. Prepare the pump for use:

A) For models P350, P1000 & P1000AD:
• Pull spring loaded lock pin, pivot toward rear to unlock the
handle (Fig. 5).
• Remove shipping plug and replace with air vent plug (Fig. 6).
• Pull vent plug stem upward before use, press down when
moving or storing the pump (Fig. 7).
B) For model P601S:
• Push the handle lock latch to unlock the pump handle
Figure 9 - Horizontal and Vertical Position
(Fig. 8).
C) For model P2001:
• Pull spring loaded lock pin pivot toward rear to unlock the
handle (Fig. 5). OPERATION
• Pull vent plug stem upward before use, press down when ! WARNING: ALWAYS monitor pressure, load or position
moving or storing the pump (Fig. 7). using suitable equipment. Pressure may be monitored by
2. Depressurize system by opening release valve counter- means of an optional manifold and gauge (contact BVA
clockwise, but no more than 2 full turns. Then carefully remove Hydraulics). Load may be monitored by means of a load cell
the threaded plug on oil outlet port, and connect 3/8ʺ NPTF and digital indicator. Correct application position can only be
(1/4” NPTF P350) hydraulic connection to oil outlet port, i.e. determined by the operator of the equipment.
coupler, gauge adapter, hydraulic hose etc. Ensure all fluid
1. Remove the threaded plug, then connect the pump to suitable
ports and thread connections are clean before connect.
application.
NOTICE: Always secure threaded connections with non-hardening 2. Ensure the oil level is correct and the system fittings and
pipe thread compound. Take care not to introduce compound into connections are leak free before operating the pump.
port orifices. Tighten securely to prevent accidental removal of 3. Pump may be used in horizontal and vertical position as
components while in use. illustrated in Figure 9.
3. Install a pressure gauge in-line from the pump for better control
and safety purpose. ! CAUTION: NEVER operate pump with release valve closed
and disconnected from application. If operated in this
NOTICE: It is recommended to use BVA fittings, gauge adapter condition, the hose and connections become pressurized.
and guage. This increases burst hazard. Damage may occur to pump
4. Tighten securely to prevent accidental removal of components and its components
while in use. 4. Close release valve by turning it clockwise. Finger tight ONLY.
5. Check for leaks in system and repair by qualified personnel as Using tools on release valve can damage it and cause the
needed. Depressurize the hydraulic system before servicing. pump to malfunction.
5. Pump handle until desired pressure, load or position is
reached.
6. Pressure will maintain until the release valve is opened.
7. To retract application, turn the release valve knob slowly
counterclockwise (never more that 2 full turns).

4
 OPERATION (con’t) Adding Hydraulic Fluid
8. Excludes model P601S: 1. Depressurize and disconnect hydraulic hose from application.
Under no load or 1st stage condition, the pump operates in 2. With pump in its upright, horizontal position, remove vented oil
high flow for rapid advance. When load is contacted, the pump filler plug/screw located on top of the reservoir.
will automatically shift to the 2nd stage for building pressure. 3. Use a small funnel to fill reservoir to within 1/4ʺ (6 mm) of the
When pump pressure reaches approximately 200 psi, you opening.
must momentarily stop pumping and raise the handle to shift to 4. Wipe up any spilled fluid and reinstall the vented oil filler plug/
the high pressure stage. After the pump shifts, pumping takes screw.
less effort. Changing Hydraulic Fluid
For best results, change fluid once a year.
NOTICE: operate pump handle at slower speed during the high 1. Remove vented oil filler plug/screw and drain used fluid into a
flow 1st stage to ensure the pump delivers maximum oil volume. sealable container.
2. Dispose of fluid in accordance with local regulations.
3. Fill with a good quality hydraulic jack oil as recommended above.
MAINTENANCE Reinstall vented oil filler plug/screw.
1. Inspect hoses and connections daily. Replace damaged
components immediately with BVA Hydraulics Replacement Lubrication
Parts only. Use a light machine oil to lubricate pivot points, hinges etc.
2. Tighten connections as needed. Use pipe thread sealing
compound when servicing connections. Storage
3. Use only good quality hydraulic fluid. We recommend using 1. When not in use, depressurize and disconnect hoses from
premium hydraulic fluid. Never use brake fluid, transmission application.
fluid, turbine oil, motor oil, alcohol, glycerine etc. Use of other 2. Wipe clean, throughly
than good quality hydraulic oil will void warranty and damage 3. Pump should be stored where protected from the elements,
the pump, hose, and application. abrasive dust, and damage. Store in clean, dry environment.
Avoid temperature extremes. Lock handle into position using
the spring loaded locking pin mechanism.
4. Shield pump with a protective cover.

TROUBLESHOOTING GUIDE
The following information is intended as an aid in determining if problem exists. Pumps should be repaired only by authorized BVA Service
Center. For repair service, contact service center in your area.

Symptom Possible Causes Corrective Action

Erratic application action • Air in the system. • Vent the system.

• External leak. • Tighten all connections.
• Internal hydraulic leak. • Contact service center.

Application does not extend, move • Overload condition. • Remedy overload condition.
or respond to pressurized fluid • Release valve not closed. • Ensure release valve closed.
• Loose couplers/connections. • Tighten couplers/connections.
• Faulty couplers/connections. • Replace couplers/connections.
• Pump malfunction. • Contact service center.

Application responds to pressurized • Overload condition. • Remedy overload condition.

fluid, but system does not maintain • Release valve not closed. • Ensure release valve closed.
pressure • Pump or valve malfunction. • Contact Service Center.
• Application/connection leaking. • Replace application/connection.

Application responds slower than • Loose connection or coupler. • Tighten connection or coupler.
normal • Restricted hydraulic line or fitting. • Clean and replace if damaged.
• Application/connection leaking. • Replace application/connection.

Application does not return fluid to • Malfunctioning coupler, damaged • Secure load by other means. Open release
pump (i.e. cylinder will not retract) application. valve, depressurize pump and hose,
remove coupler and/or application, then
renew or replace.
• Reservoir overfilled • Secure load by other means. Open release
valve, depressurize pump and hose,
remove application, then drain fluid to
proper level.

Poor performance • Fluid level in pump is low. • Ensure proper fluid level.

5
 Hand Pump
Service Parts
MODEL: P350
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts Illustration

35
34
33
35
32

36
19

26-1
26
26-2
17
28
26-3

26-4 29
8
26-5 31
7
27
24 6 30
21
5 37
18 1
4
18a 9
3
10
3
24

14

15 11

12
20
22 25
23
16 2
13
38

38

Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized
Replacement Parts only.
6
 Hand Pump
Service Parts
MODEL: P350
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts List

Item Part Number Description Qty Item Part Number Description Qty
1 N/A Base 1 23 532-8-0040-012 Filter 1
2 H18-4-1902-208 Low Pressure Valve 1 24 * Washer 2
Assembly 25 H39-6-1603-102 Base Plate 1
3 601-7-0008-009 Steel Ball 3 26 H39-4-1606-207 Piston Assy 1
4 512-2-0063-104 Compression Spring 2 26-1 H39-5-1606-102 Large Piston 1
5 601-7-0012-000 Steel Ball 2 26-2 H39-5-1307-102 Small Piston 1
6 552-2-0080-106 Compression Spring 2 26-3 666-5-0150-204 C-Clip 1
7 * Special Washer 2 26-4 * Back-up Ring 1
8 H18-6-1215-100 Nut 2 26-5 * O-Ring 1
9 H18-4-1603-107 Release Valve 1 27 644-1-0060-05311 Screw 1
10 * O-Ring 1 28 H39-6-2108-208 Fixing Pillar 1
11 H39-6-1308-100 Iron Plate 1 29 H39-6-2109-109 Fixing Ring 1
12 649-1-0050-028 Screw 1 30 * Back-up Ring 1
13 H39-6-1502-207 Support Plate 1 31 * O-Ring 1
14 H39-6-1501-104 End Cap 1 32 H39-6-1602-100 Pin 1
15 671-2-0100-205 Nut 1 33 H39-6-2111-106 Pin 1
16 * O-Ring 1 34 H39-5-2111-100 Pin 1
17 H18-6-2112-105 Handle Grip 1 35 677-5-0030-109 E-Clip 2
18 505-9-0092-207 Oil Fill Plug 1 36 677-5-0060-108 E-Clip 1
18a H18-4-4000-102 Vent Plug (Brass & 1 37 H39-5-8104-103 Nut 1
Black
38 651-1-0050-103 Screw 5
19 H39-3-2100-204 Handle 1
(*) H39-3-9901-102 Seal Kit 1
20 H39-6-4401-105 Screw Bar 1
21 H39-6-1803-201 Tube 1
22 H18-4-1901-105 High Press Valve 1
Assy

(*) - Indicates items included in, and available only as part of Seal Kit. Seal Kits require special skill, training and equipment
to repair. Installation must be done by Authorized Service Center. Contact BVA for list of Authorized Service Centers.
N/A - Part is not available as replacement.
7
 Hand Pump
Service Parts
MODEL: P601S
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts Illustration

6 7

3 4 8
5
9
10
5
3 11
2
12
1 13
14
15

16
15
37
17
36
18
35 19
34 22
20 21
20
3
4 19
33 23 24
32
25

31

30

28 26
29 27

Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized
Replacement Parts only.
8
 Hand Pump
Service Parts
MODEL: P601S
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts List

Item Part Number Description Qty Item Part Number Description Qty
1 H18-6-2112-105 Handle Grip 1 22 D05-6-1001-106 Oil Plug 1
2 H54-6-2101-104 Handle 1 23 * Oil seal 1
3 649-1-0060-040 Screw 3 24 H54-4-2105-100 Release valve 1
4 H54-6-2104-100 Bush 2 25 H54-6-2109-100 Base 1
5 605-3-0060-005 Spring washer 2 26 505-9-0092-207 Oil Plug 1
6 * Pin 1 27 H54-3-2103-201 Reservoir 1

7 * Retaining pin 1 28 * Bonded seal 1

29 H28-6-4404-106 Nut 1
8 H54-6-2111-107 Handle sleeve 1
30 H18-5-4401-207 Screw Bar 1
9 * Piston pin 1
31 532-8-0050-024 Filter 1
10 430-6-1601-209 Piston 1
32 * O-ring 1
11 428-6-1104-203 Screw adjustment 1
33 H54-6-2108-108 Hook 1
12 513-3-0270-010 Washer 1
34 501-9-0085-202 Steel Ball Block 1
13 428-6-1103-100 Upper seal base 1
35 516-2-0080-010 Safety Spring 1
14 * V-oil seal 1
36 426-6-1201-106 Adjustment Screw 1
15 * V-oil seal 2
37 324-4-1900-208 Filler screw assy. 1
16 * V-oil seal 1
* H54-3-9902-105 Repair Kit 1
17 428-6-1102-209 Lower seal base 1
18 522-8-0127-016 Filter 1
19 601-7-0008-009 Steel Ball 2
20 601-7-0006-005 Steel Ball 2
21 426-6-1105-201 Bolt 1

(*) - Indicates items included in, and available only as part of Seal Kit. Seal Kits require special skill, training and equipment
to repair. Installation must be done by Authorized Service Center. Contact BVA for list of Authorized Service Centers.
N/A - Part is not available as replacement.
9
 Hand Pump
Service Parts
MODEL: P1000
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts Illustration

2
1

8
28
11
12

18

21

22

22

Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized
Replacement Parts only.
10
 Hand Pump
Service Parts
MODEL: P1000
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts List

Item Part Number Description Qty Item Part Number Description Qty
1 H18-6-1317-108 Pin 1 24 H18-4-1901-105 High pressure Valve Ass. 1
2 H18-6-1318-100 Pin 1 25 H18-5-4401-207 Screw Bar 1
3 H18-5-1318-104 Pin 1 26 * O-ring 1
4 677-5-0040-102 E-clip 2 27 H18-4-1902-208 Low pressure valve ass. 1
5 667-5-0100-005 C-clip 1 28 552-2-0061-102 Bevel compressing spring 2
6 667-5-0120-001 C-clip 1 29 601-7-0012-000 Steel ball 2
7 H18-6-2114-200 Fixing pillar 1 30 552-2-0080-106 Bevel compressing spring 2
8 644-1-0060-071 Screw 1 31 * Special Washer 2
9 D05-6-1001-106 Nut 1 32 H18-6-1215-100 Nut 2
10 661-2-0040-012 Anti-loosen Nut 1 33 * O-ring 1
11 512-2-0060-016 Compressing Spring 1 34 * Back-up Ring 1
12 649-1-0050-037 Screw 1 35 * Back-up Ring 1
13 H18-6-1322-101 Washer base 1 36 * O-ring 1
14 H18-6-1321-200 Hook 1 37 H28-4-4406-108 Piston Ass. 1
15 N/A Base 1 38 H18-3-2100-100 Handle 1
16 601-7-0008-009 Steel ball 3 39 H18-6-2112-105 Handle Grip 1
17 * O-ring 1 40 * Washer 2
18 H18-4-1603-107 Release valve 1 41 H18-6-1911-100 Tube 1
19 H18-6-1308-107 Iron plate 1 42 H18-6-2122-105 Gable 1
20 649-1-0050-028 Screw 1 43 671-2-0100-205 Nut 1
21 H18-5-1602-101 Base Plate 1 44 H18-5-1502-208 Support Plate 1
22 651-1-0050-103 Screw 5 45 H18-4-1905-103 Air Vent Assy 1
23 532-8-0050-024 Filter 1 (*) H18-3-9902-101 Repair Kit 1

(*) - Indicates items included in, and available only as part of Seal Kit. Seal Kits require special skill, training and equipment
to repair. Installation must be done by Authorized Service Center. Contact BVA for list of Authorized Service Centers.
N/A - Part is not available as replacement.
11
 Hand Pump
Service Parts
MODEL: P1000AD
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts Illustration

3
4
2
1

5
44 6

7
43
8
38 42
37 41
45 36 10 12
46 9 11
35 40
13 14
34 39
16
47 15
47 31
48
31 21
33
53 23 16

52 24 17
46 25
26
51 27
50 32 21
22 20
23 18

31
30 19

54 49
28

19 29

Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized
Replacement Parts only.
12
 Hand Pump
Service Parts
MODEL: P1000AD
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts List

Item Part Number Description Qty Item Part Number Description Qty
1 H18-6-1317-108 Pin 1 28 H18-6-1909-103 Suction Tube 1
2 H18-6-1318-100 Pin 1 29 532-8-0040-012 Filter 1
3 677-5-0040-102 E-Clip 2 30 H18-6-1907-109 Silicon Tube Seat 1
4 H18-5-1318-104 Pin 1 31 * O-Ring 3
5 667-5-0100-005 C-Clip 1 32 H18-5-4401-207 Screw Bar 1
6 667-5-0120-001 C-Clip 1 33 512-2-0067-010 Compression Spring 1
7 H18-6-2114-200 Fixing pillar 1 34 512-2-0063-104 Compression Spring 2
8 644-1-0060-071 Screw 1 35 601-7-0012-000 Steel Ball 2
9 D05-6-1001-106 Plug 1 36 552-2-0080-106 Bevel Compression 2
Spring
10 661-2-0040-012 Lock Nut 1
37 * Special Washer 2
11 512-2-0060-016 Compression Spring 1
38 A16-6-5006-104 Screw 2
12 649-1-0050-037 Screw 1
39 * O-Ring 1
13 H18-6-1322-101 Washer base 1
40 * Back-up Ring 1
14 H18-6-1321-200 Hook 1
41 * Back-up Ring 1
15 N/A Base 1
42 * O-Ring 1
16 601-7-0008-009 Steel Ball 3
43 H28-4-4406-108 Piston Assembly 1
17 H28-4-1700-105 Release Valve Assy. 1
44 H18-3-2100-100 Handle 1
18 H18-5-1602-101 Base Plate 1
45 H18-6-2112-105 Handle Grip 1
19 651-1-0050-103 Screw 5
46 * Packing 2
20 609-1-0075-105 Plug 1
47 H18-6-1906-107 Air Vent 2
21 A17-6-1216-102 Nail 2
48 H18-6-1911-100 Reservoir 1
22 512-2-0080-306 Compression Spring 1
49 H18-5-1502-208 Gable Plate 1
23 A17-5-1603-300 Adjusting Screw 2
50 H18-6-1904-103 Gable 1
24 641-1-0098-103 Screw 1
51 677-5-0030-109 E-Clip 1
25 651-7-0004-107 Adapter 1
52 * O-Ring 1
26 H18-6-1908-101 Steel Tube 1
53 H18-6-1905-105 Air Vent Seat 1
27 H18-6-1910-108 Silicon Tube 1
54 671-2-0100-205 Nut 1
(*) H18-3-9918-106 Seal Kit

(*) - Indicates items included in, and available only as part of Seal Kit. Seal Kits require special skill, training and equipment
to repair. Installation must be done by Authorized Service Center. Contact BVA for list of Authorized Service Centers.
N/A - Part is not available as replacement.
13
 Hand Pump
Service Parts
MODEL: P2001
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts Illustration

1
2
3
4

5
43 6

37 42 8
41
44 40 9
36 12

39 10
35 14
38 11
34 13

33 19
45 18
17
16
15
21 19
32 15 18
17
20
46
21
22
26 23
31 25
36 30 27 24
47 28

29

Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized
Replacement Parts only.
14
 Hand Pump
Service Parts
MODEL: P2001
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419 * Fax: 816-448-2142
E-mail: [email protected] Website: www.bvahydraulics.com

Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence.

Parts List

Item Part Number Description Qty Item Part Number Description Qty
1 677-5-0040-102 E-Clip 2 27 651-7-0063-007 Adapter 1
2 H18-5-1318-104 Pin 1 28 H53-5-1808-104 Oil Tube 1
3 H18-6-1318-100 Pin 1 29 532-8-0040-012 Filter 1
4 H18-6-1317-108 Piston Pin 1 30 H53-6-1814-109 Steel Bar 1
5 667-5-0100-005 C-Clip 1 31 641-1-0098-103 Screw 1
6 667-5-0120-001 C-Clip 1 32 * O-Ring 1
7 H28-4-4406-108 Piston Assy 1 33 512-2-0063-104 Compression Spring 2
8 * O-Ring 1 34 601-7-0012-000 Steel Ball 2
9 * Back-up Ring 1 35 552-2-0080-106 Compression Spring 2
10 * Back-up Ring 1 36 * Special Washer 3
11 * O-Ring 1 37 A16-6-5006-104 Screw 2
12 H18-6-2114-200 Fixing Pillar 1 38 H18-6-1321-200 Handle Pin 1
13 644-1-0060-071 Screw 1 39 H18-6-1322-101 Handle Pin Post 1
14 D05-6-1001-106 Nut 1 40 512-2-0060-016 Compression Spring 1
15 A17-6-1216-102 Needle Valve 2 41 661-2-0040-012 Lock Nut 1
16 512-2-0080-306 Compression Spring 1 42 649-1-0050-037 Screw 1
17 A17-5-1603-300 Adjust Nut 2 43 H28-3-2118-107 Handle 1
18 * Special Washer 2 44 H18-6-2112-105 Handle Grip 1
19 414-6-1215-509 Nut 2 45 A57-4-1900-105 Air Vent Assembly 1
20 512-2-0067-010 Compression Spring 1 46 H53-3-1803-308 Reservoir 1
21 601-7-0008-009 Steel Ball 3 47 H28-6-4404-106 Nut 1
22 * O-Ring 1 (*) H53-3-9905-104 Seal Kit 1
23 H18-4-1603-107 Release Valve Assy 1
24 649-1-0050-028 Screw 1
25 H53-6-1302-102 Valve Stop 2
26 N/A Base 1

(*) - Indicates items included in, and available only as part of Seal Kit. Seal Kits require special skill, training and equipment
to repair. Installation must be done by Authorized Service Center. Contact BVA for list of Authorized Service Centers.
N/A - Part is not available as replacement.
15
 LIMITED LIFETIME WARRANTY

BVA Hydraulics®, represented in the United States by SFA Companies [ʺSFAʺ] warrants this product to be free from defects in material
and workmanship for the life of the product as long as the original purchaser owns the product. The warranty is non-transferable and is
subject to the terms, exclusions, and limitations described below:

• Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as
worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any
warranty credit for such damaged components.
• This warranty does not cover ordinary wear and tear, overloading, alterations (including repairs or attempted repairs not performed
by BVA Hydraulics or one of its authorized personnel), improper fluid use, or use of the product in any manner for which the product
was not intended or the use of which is not in accordance with the instructions or warnings provided with the product.
• In the unlikely event that a BVA Hydraulics product fails due to material defect in workmanship, you may contact SFA for disposition.
In such cases, the customer’s sole and exclusive remedy for any breach or alleged breach of warranty is limited to the repair or
replacement of the defective product.
• Under no circumstances is BVA Hydraulics liable for any consequential or incidental damage or loss whatsoever.
• THIS WARRANTY IS LIMITED TO NEW PRODUCTS SOLD THROUGH AUTHORIZED DISTRIBUTORS AND OTHER CHANNELS
DESIGNATED BY BVA HYDRAULICS. NO AGENT, EMPLOYEE OR OTHER REPRESENTATIVE OF BVA HYDRAULICS IS
AUTHORIZED TO MODIFY THIS WARRANTY.
• THE FOREGOING IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A FITNESS FOR A PARTICULAR PURPOSE.
• Components not manufactured by BVA Hydraulics including certain motor systems, gasoline engines, and others are not covered by
this warranty and instead are covered by the manufacturer’s separate manufacturer’s warranty provided in the package.
• BVA Hydraulics’ liability in all cases is limited to, and will not exceed the purchase price paid for the product.

SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
E-mail: [email protected]
16