Scribd
Upload
28 views2 pages

UC v3 3 Milestone Release Notes

Uploaded by

saijot93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

UC v3 3 Milestone Release Notes

Uploaded by

saijot93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

​ ​Universal Control 3.

3 Milestone Release Notes​ ​7/7/2020

Version Information:
● Universal Control (Mac/PC) - v3.3.0.59348
● UC Surface (iOS/Android) - v3.2.1.57677
● QMix-UC (iOS/Android) - v3.1.0.54974 ​(Adds support for SL16.0.2 Firewire and Quantum 2626)
● Capture (Mac/PC) - v3.0.3.57677
● FaderPort (2018) / FaderPort 8 / FaderPort 16 - v​3.42
NOTE: If updating from FaderPort 16 firmware earlier than v3.32, Universal Control will
prompt for a manual reboot in order to complete the update process
● The original FaderPort will no longer be supported in Universal Control from this version forward
● Quantum Series - Driver 1.28
● StudioLive 1602 USB - XMOS v 0.05

Supported OS Versions:
● OS X 10.13.6 (High Sierra) or later
● Windows 10 (x64) v1709 or later
● Android 6.0 Marshmallow or later
● iOS 10 or later

New In This Release:


● Adds support for ATOM SQ

Known Issues:

UC Surface
● Copy, Delete, & Rename Local Scenes for Cascaded AI mixers not functioning as expected

AI/RM Mixers
● Fat Channel Reset Button Does Not Reset the HPF (or LPF)
● FX issues with Cascaded RM/RML mixers
○ UC Surface and CS18 not controlling some of Slave mixer’s FX Bus settings (volume,
mute, Pre/Post)
● FX Preset list does not update automatically when selecting FX Busses (must exit FX and return
to update preset list)
● FX Bus Master is missing HPF control
● Restoring a Mixer Backup over Firewire is not possible.
○ Must be done over Network connection
● Auxiliary Firewire Input 52 driver label is incorrect
● Users on OS X 10.8.5 may experience a firewire driver installation issue (to be fixed in UC 2.5)
● Solo level missing from Settings page
● Channel Type and Channel Color not persistent or shared across clients
○ Not implemented in firmware yet

Series III DAW Mode


● When viewing a send or cue mix, send labels should be placed in the scribble strips
● Incorrect preamp gain range on mixer display when using TRS inputs
● Meters don't match between DAW mode and Mixer mode
● Channel parameters may not populate in Fat Channel after opening song
● Series III Automation Control: Bypass Button Not Present
● Newly added Plugin not automatically selected and controls not on FatCh Encoder section if
another Plugin wasn't already selected when adding the new Plugin
● Talkback Button Does Not Light Up In UCS When Engaged From S1
● Channel Input Does Not Have Selection For "None"
● Unity Fader Value Is Not Accurate
● There Is No Way To Remove A Channel Insert
● Write Select Channel Should Turn Red Like FaderPort 8 & 16
● Pressing Inputs layer button should open Inputs section in S1 Console
● Adding Send while viewing Sends view doesn't update fader level
● Select Buttons For Multi-Channel Instrument Outputs Do Not Light Up

FaderPort 8 and 16
● A restart of Pro Tools and FaderPort may be required if the FaderPort loses power when using
Pro Tools

ATOM
● MIDI event velocities cannot be adjusted by ATOM with some Studio One settings setups

Join our forum community of PreSonus users on the ​PreSonus Forum​. Submit and vote for feature
requests on the ​PreSonus Answers​ site. Visit our​ ​Knowledge Base​ for more informative articles authored
by the support staff. To log a support ticket or contact technical support, please visit​ ​MyPreSonus​.

You might also like