Scribd
Upload
32 views2 pages

ATC SCM25A Pro Mk2 Datasheet

Atc scm25

Uploaded by

Cost Coul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views2 pages

ATC SCM25A Pro Mk2 Datasheet

Atc scm25

Uploaded by

Cost Coul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

T E C H N I C A L DATA S H E E T

E N G I N E E R S

SCM25A Pro Mk2


Compact Active 3-way Studio Monitor

Overview Electronic specifications

Compact very high performance 3-way studio monitor Amplifier type: Grounded Source MOSFET based Class A-B, convection cooled.
On-board 242W convection cooled discrete MOSFET class A/B amplifier. Output Power: Bass 150W into (8Ω), Mid 60W into (8Ω), HF 32W into (6Ω).
1 x balanced XLR input. THD + N : < 0.003%/-92dB (1kHz, 1dB below rated power, 90kHz BW).
User adjustable bass boost and input sensitivity. Input CMRR: 82dB at (10kHz).
Suitable for use in stereo, surround and immersive audio applications. Balanced Input: 1x Rear Panel Mounted Female XLR, pin 2 hot.
Install variant with remote amplifier also available – SCM25Ai Pro Mk2. Input Impedance: 20kΩ (differential).
Frequency Response: <2Hz to >200kHz (-3dB).
Acoustic specifications Crossover Filters: 4th Order Linkwitz Riley at 380Hz and 3.5kHz.
Bass Boost Control: Continuously variable from 0dB to +3dB.
Drive Units: Bass: 1 x SB50 -164SC 8Ω
Input Sensitivity: 2.2dBu/1Vrms for full power.
Mid: 1 x SM75-150 16Ω
Input Sensitivity Control: Continuously Variable from 2.2dBu – 8.2dBu/1Vrms – 2Vrms (-6dB).
HF: 1 x SH25-76S 6ΩΩCompact.Ω
Limiter: ATC Active FET Momentary Gain Reduction, active limiter indicated via front panel LED.
Low Frequency Cut-off: 47Hz (-6dB, anechoic).
Mains Input: 220 -230V or 115V – Factory set. Please observe panel markings and labels!
High Frequency Cut-off: 25kHz (-6dB).
Power Consumption: Idle 24W/35VA. 1/8th Power 117W/159VA. Full Power 255W/324VA.
MaxSPL: 109dB continuous, 115dB peak (Per pair, IEC Weighted Pink Noise, 1m, anechoic).
Heat Output: Idle 82BTU/hr. 1/8th power 335 BTU/hr. Full Power 358BTU/hr.
Sensitivity: 92dBC ref. +4dBu (per single unit,1m, pink noise, bass boost 0dB, sensitivity 2.2dBu/1V).

Physical specifications

See following page.


PRO SERIES
T E C H N I C A L DATA S H E E T Loudspeaker Technology Ltd
Gypsy Lane, Aston Down, Stroud, Gloucestershire GL6 8HR , United Kingdom E N G I N E E R S

+44 (0)1285 760561 [email protected] www.atc.audio

SCM25A Pro Mk2 ATC reserve the right to change specifications without prior notice
Acoustic Transducer Co. Is a trading name and ATC is the registered Trade Mark of Loudspeaker Technology Ltd.
Compact Active 3-way Studio Monitor

Net Weight: 25.1kg/55.2lbs. SCM25A PRO MK2


Dimensions...
PRO SERIES

You might also like