Scribd
Upload
137 views

D17.1 D17.1M 2017 Sample WPS Form

Uploaded by

Mhmoudhaggag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
137 views

D17.1 D17.1M 2017 Sample WPS Form

Uploaded by

Mhmoudhaggag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AWS D17.1/D17.

1M:2017

SAMPLE WELDING PROCEDURE SPECIFICATION (WPS)


(SMAW, GMAW, GTAW, FCAW, OFW, PAW)

Company Name WPS No. Rev. No. Date

Authorized by Date Supporting PQR(s) FTT Report

BASE METALS Thickness Range


Specification Type or Grade M Group As-Welded w/PWHT
Base Material Groove Welds
Welded To Groove w/FTT
Backing Material Partial Pen. Groove Welds
Other Fillet Welds
Pipe/Tube Diameter Range

FILLER METALS Thickness Range


Process Spec. Classification F-no. A-no. Trade Name As-Welded w/PWHT
Process 1
Process 2
Process 3
Cons. Insert □ Required □ Optional □ None
Flux □ Required □ Optional □ None
Sup. Filler □ Required □ Optional □ None

JOINT DETAILS JOINT DETAILS (Sketch)


Groove Type
Groove Angle
Root Opening
Root Face
Backgouging
Method

POSTWELD HEAT TREATMENT Sketches, production drawings, welding symbols, or written


Temperature description should show the general arrangement of the parts
Time at Temperature to be welded. Where applicable, the root details of the weld
Other groove may be specified.

PROCEDURE
PROCEDURE
Weld
Weld Layer(s)
Layer(s) // Pass(es)
Pass(es)
Process
Process
Type
Type (Manual.,
(Manual., Mechanized,
Mechanized, etc.)
etc.)
Preheat
Preheat Temperature
Temperature
Interpass Temperature
Interpass Temperature
Filler Metal Size
Filler Metal Size
Position
Position
Vertical Progression
Vertical Progression
Shielding Gas Compos. (GTAW)
Shielding Gas Compos. (GTAW)
Flow Rate (GTAW)
Flow Rate (GTAW)
Nozzle Size (GTAW)
Nozzle Size (GTAW)
Electrical Characteristics --- --- --- ---
Electrical Characteristics
Electrode Diameter (GTAW) --- --- --- --- --- --- --- ---
Electrode
Current Diameter
Type (GTAW)
& Polarity
Current Type & Polarity
Amps
Amps
Volts
Volts or Hot Wire Feed (GTAW)
Cold
Cold orSpeed
Travel Hot Wire Feed (GTAW)
Travel Speed
Maximum Heat Input
Technique
Maximum Heat Input --- --- --- ---
Technique
Stringer or Weave --- --- --- --- --- --- --- ---
Multi or Single
Stringer Pass (per side)
or Weave
Oscillation (GTAW
Multi or Single PassMech./Auto.)
(per side)
Traverse Length
Oscillation (GTAW Mech./Auto.)
Traverse Speed
Traverse Length
Dwell Time
Traverse Speed
Peening
Dwell Time
Interpass Cleaning
Peening
Other
Interpass Cleaning
Other
Figure G.1—Example of a Welding Procedure Specification

Figure G.1 – Example of a Welding


90 Procedure Specification
see weldingforms.com

You might also like