Product Bulletin

LAMB ELECTRIC Model: 122171-07

SPECIAL FEATURES
- 1500+ hours life (Infinity Brush)
DESCRIPTION - 700 Peak Air Watts
- Up to 45% Overall Efficiency
- Single stage tapered fan - High efficient cooling system
- 8.4" / 213 mm diameter - Lamb "Green Power Label"
- Improved sound quality - UL recognized, category PRGY2
- "True" tangential discharge (E47185)
bracket - CSA certification pending
- 120 volts AC - Same mounting patern as
- 3.5" High-Efficiency lamination Lamb's 7.2 tangential-bypass
- Double ball bearings; 10mm output - With larger cooling fan and filter
DESIGN APPLICATION - Optional locked-rotor, blocked
cooling air and running
- Commercial and Residential overload protection
Central Cleaning Systems - Optional new patent-pending
- Car wash vac and blower bearing protection for wet
systems applications. (122170-18)
- Equipment operating in environments
requiring separation of working air
from motor ventilating air PEAK AIRWATTS
- Designed to handle clean, dry,
filtered air only 717
Calculated in accordance with ASTM F2105

TYPICAL MOTOR PERFORMANCE.* (At 120 volts, 60Hz, test data is corrected to standard conditions of 29.92 Hg, 68° F.)
Orifice Amps Watts RPM Vac Flow Air
120 180
Vac
(Inches) (In) (In.H2O) (CFM) Watts
Flow
160 2.000 15.1 1718 26120 10.4 166.2 204
100
A 140 1.750 15.1 1715 26120 16.2 158.0 302
S 80 120 1.500 15.0 1703 26120 26.4 146.6 455
Vacuum--Inches H2O

T 1.250 14.8 1681 26510 42.4 129.0 643

Air Flow--CFM

100
M 60 1.125 14.4 1645 26520 51.8 115.1 700
80 14.0 1600 26910 61.6 99.0 716
1.000
D 40 60 0.875 13.4 1528 27690 71.4 81.9 687
A 40 0.750 12.5 1437 28520 80.8 63.8 606
T 20 0.625 11.5 1320 29680 89.1 46.4 486
20
A 0.500 10.5 1212 30870 96.3 30.8 348
0 0
0.375 9.7 1124 32050 103.5 18.0 219
0.000

0.250

0.375

0.500

0.625

0.750

0.875

1.000

1.125

1.250

1.500

1.750

2.000

0.250 9.0 1047 33250 109.1 8.5 109

Orifice Diameter (Inches) 0.000 8.5 968 3420 110.0 0.0 0

3000 90 Orifice Amps Watts RPM Vac Flow Air

Vac
M Flow
80 (mm) (In) (mm H2O) (L/Sec) Watts
2500
E 70 48.0 15.1 1717 26120 329 76.7 247
T 40.0 15.0 1707 26120 593 70.8 409
2000 60
R 30.0 14.6 1661 26516 1208 57.3 674
Vacuum--MM H20

Air Flow--L/Sec.

I 50 23.0 13.5 1546 27495 1751 40.7 694

1500
C 40 19.0 12.5 1435 28543 2057 29.9 604

1000 30 16.0 11.5 1325 29634 2255 22.2 491

D 13.0 10.6 1223 30751 2428 15.3 362
20
A 500 10.0 9.8 1137 31873 2601 9.4 238
T 10 6.5 9.0 1051 33190 2764 4.2 115
A 0 0 0.0 8.5 968 3420 2794 0.0 0
0.0

6.5

10.0

13.0

16.0

19.0

23.0

30.0

40.0

48.0

Orifice Diameter (mm) Note: Metric Performance data is calculated from the ASTM data above.

* Data represents performance of a typical motor sampled from a large production quantity. Individual motor data may vary due to normal manufacturing variations.

Test Specs: 120 Minimum Sealed Vacuum: 100" ORIFICE: 7/8" Minimum Vacuum: 65" Maximum Watts: 1750
PRODUCT BULLETIN 122171-00

DIMENSIONS

IMPORTANT NOTE: Pictorial and dimensional data are subject to change without notice. Contact factory for current revision levels.

WARNING - When using AMETEK Floorcare & Specialty Motors (F&SM) bypass motors in machines that come in contact with foam,
liquid (including water), or other foreign substances, the machine must be designed and constructed to prevent those substances from reaching
the fan system, motor housing,and electrical components. F&SM vacuum motors other than hazardous duty models should not be applied in
machines that come in contact with dry chemicals or other volatile materials. Failure to observe these precautions could cause flashing
(depending on volatility) or electrical shockwhich could result in property damage and severe bodily injury, including death in extreme cases.
All applications incorporating F&SM motors should be submitted to appropriate organizations or agencies for testing specifically related to the
safety of your equipment.

AMETEK/Floorcare & Specialty Motors

www.ametekfsm.com
Issued: June, 2008