Scribd
Upload
25 views

SMS ASM Sand Injection Calibration

Uploaded by

Adam Taha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

SMS ASM Sand Injection Calibration

Uploaded by

Adam Taha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASM Sand Injection Calibration

SMS provides Acoustic Sand Monitoring (ASM) Sand Injection Calibration solution that
allows the end user to optimise their existing ASM effectiveness to quantify solids.
System Overview
SMS Sand Injection System allows for the safe displacement of a
known volume of gel containing a set concentration of sand
suspended within. A pump system set at a specific displacement
rate applies a known volume of liquid, at pressure, to the backside
of piston displacement cylinder. On the front side of the piston
displacement cylinder is the sand injection gel which is then
displaced into the process system. This set-up is used to support
the calibration and validation of Acoustic Sand Detectors.

Features & Benefits


• Quick and easy fill/refill system
• Portable, simple, effective design
• Constant sand concentration injected over set time

Description & Documentation


Net Volume 4000cc
Design 0°C to 50°C – Ambient
Temperature
Design Pressure System (excluding pumps): 400 Bar Design
High Flow Pump: 336 LPH @ 62 Bar Complies with:
Low Flow Pump: 86 LPH @ 134 Bar Approved for use within the European union
Material Stainless 316L under the following Directive:
Injection Rate Up to 336 Litres per hour
- 2014/68/EU (PED)
(Back Pressure Dependant)
Net Weight Up to 120kg Design codes:
Generally, in accordance with PD 5500
Dimensions 650mm x 1385mm x 530mm
WxHXD Service:
Standard • Certificate of conformity - UN 1954 Compressed gas, flammable, n.o.s
Documentation • Hydrostatic test certificate - UN 1066 Nitrogen, compressed
• User instructions - UN 1006 Argon compressed
• User spare parts list
Options:
Optional • Hydrostatic test certificate, with 3rd
Multiple Injection rates available
Documentation party endorsement, complete with 3rd
party inspection release note
• Copy of PED 2014/68/EU Declaration
of Conformity
• Material Certification to EN 10204: 3.1
for pressure retaining components

Aberdeen / Abu Dhabi / Kuala Lumpur


www.smsintegrity.com
[email protected]

You might also like