Scribd
Upload
19 views2 pages

TDS Gen 750

TDS GEN 750

Uploaded by

hardik Agrawat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views2 pages

TDS Gen 750

TDS GEN 750

Uploaded by

hardik Agrawat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

GEN 750
Revision: 01/0/2018
Page 1 of 2
Technical data:

Basis Polyurethane
Consistancy Stable foam, thixotopic
Curing system Moisture curing
Skin Formation (FEICA TM 1014) 8 - 10 min
Cutting Time (FEICA TM 1005) 25 - 35 min
Density Ca. 25 kg/m³
Sound insulation (EN ISO 717-1) 50 - 60 dB
Insulation factor (DIN52612) 35 mW/m.K
Curing time 95 min for a 30 mm bead
Joint Yield (FEICA TM 1002) 750 ml yields ca. 21 m of foam
Shrinkage (FEICA TM 1004) <2%
Post-expansion (FEICA TM 1004) <2%
Cellular Structure Ca. 70 % closed cells
Fire rating (DIN4102) B3
Insulation factor (DIN52612) 35 mW/m.K
Compressive strength (FEICA TM 1011) Ca. 2,0 N/cm²
Shear strength (FEICA TM 1012) Ca. 5,0 N/cm²
Water absorption 1 % volume
Temperature resistance -40 °C till +90 °C (cured)
Soudal NV uses test methods approved by FEICA designed to deliver transparent and reproducible test results, ensuring customers have
an accurate representation of product performance. FEICA OCF test methods are available at: http://www.feica.com/our-industry/pu-foam-
technology-ocf . FEICA is a multinational association representing the European adhesive and sealant industry, including one-component
foam manufacturers. Further information at: www.feica.eu

Product: Application examples:


G EN 750 is one-component, self-expanding, ready  G ap filling applications
to use polyurethane foam.  Cavities filling
 Sealing of all openings in roof constructions
Characteristics:  Creation of a soundproof screen
 High thermal and acoustical insulation  Improving thermal insulation in cooling systems
 Excellent mounting capacities  Application of a soundproofing layer on motors
 Excellent stability (no shrink or post expansion)  Connecting of insulation materials and roof
constructions
 Excellent adhesion on most substrates (except
Teflon, PE and PP)
 Very good filling capacities

Remark: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted
in good faith. Because of the diversity of the materials and substrates and the great number of possible applications which are out of our
control, we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments.

McCoy Soudal Sealants Adhesives & Foams Pvt. Ltd.


McCoy Corporate Tower, C–55, Okhla Industrial Area, Phase–1, New Delhi - 110020 (INDIA)
Tel.:+91 11 40623344 (100 lines) | Fax: +91 11 40623355
Website: www.mccoysoudal.com | Email: [email protected]
1800-121-6569 (Toll Free)
Technical Data Sheet

GEN 750
Revision: 01/0/2018 Page 2 of 2

Packaging: Health and safety recommendation:


Aerosol can 750 gms  Apply the usual industrial hygiene.
 Wear gloves and safety goggles.
Shelf life and storage:  Remove cured foam by mechanical means
 12 months from date of manufacturing in only, never burn away
unopened packaging stored in a cool and dry  Consult the label for more information.
place at recommended temperatures between
+5°C and +25°.
Remarks:
 Always store can with the valve pointed
upwards  Cured PU foam must be protected from UV-
radiation by painting or applying a top layer of
sealant (silicone, MS Polymer, PU and acrylic)
Application:
Shake the aerosol can for at least 20 seconds. Put
the adapter on the valve. Moisten surfaces with a
water sprayer prior to application. Remove
pressure from the applicator to stop. Fill holes and
cavities for 50 %, as the foam will expand.

Repeat shaking regularly during application. If you


have to work in layers repeat moistening after each
layer. Fresh foam can be removed using Soudal
Foamcleaner or acetone. Cured foam can only be
removed mechanically. Working temperature 5°C to
40°C. (20°C-25°C recommended)

Remark: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted
in good faith. Because of the diversity of the materials and substrates and the great number of possible applications which are out of our
control, we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments.

McCoy Soudal Sealants Adhesives & Foams Pvt. Ltd.


McCoy Corporate Tower, C–55, Okhla Industrial Area, Phase–1, New Delhi - 110020 (INDIA)
Tel.:+91 11 40623344 (100 lines) | Fax: +91 11 40623355
Website: www.mccoysoudal.com | Email: [email protected]
1800-121-6569 (Toll Free)

You might also like