11 Important Questions
11 Important Questions
Instructions : (1) Check the question paper for fairness of printing. If there is any lack
of fairness, inform the Hall Supervisor immediately.
(2) Use Blue or Black ink to write and underline and pencil to draw
diagrams.
PART – II
Note : Answer All the questions. 14x2=28
1. A car takes a turn with the velocity 50 ms–1 on a circular road of radius of curvature
10 m. Calculate the centrifugal force experienced by a person of mass 60 kg inside
the car. [MARCH – 2019]
2. The surface tension of a soap solution is 0.03 Nm–1. How much work is done in
producing soap bubble of radius 0.05 m? [MARCH – 2019]
3. Calculate the value of orbital velocity for an artificial satellite of earth orbiting at a
height of 1000 km (Mass of the earth = 6x1024 kg, radius of the earth = 6400 km).
[MARCH – 2019]
4. During a cyclic process, a heat engine absorbs 500 J of heat from a hot reservoir,
does work and ejects an amount of heat 300 J into the surroundings (cold reservoir).
Calculate the efficiency of the heat engine. [MARCH – 2020, AUGUST - 2022]
5. If the length of the simple pendulum is increased by 44% from its original length,
calculate the percentage increase in time period of the pendulum. [MARCH – 2020]
6. The position vector and angular velocity vector of a particle executing uniform
circular motion at an instant are 2𝑖̂ and 4𝑘̂ respectively. Find its linear velocity at
that instant. [SEPTEMBER – 2020]
7. A metal cube of side 0.20 m is subjected to a shearing force of 4000 N. The top
surface is displaced through 0.50 cm with respect to the bottom. Calculate the
shear modulus of elasticity of the metal. [SEPTEMBER – 2020]
[ Turn Over
2
PART – III
Note : Answer All the questions. 14x3=42
15. What is the torque of the force ⃗F→ = 3𝑖̂ − 2𝑗̂ + 4𝑘̂acting at a point 𝑟→ = 2𝑖̂ + 3𝑗̂ + 5𝑘̂
about the origin? [MARCH – 2019]
16. Find the rotational kinetic energy of a ring of mass 9 kg and radius 3m rotating with
240 rpm about an axis passing through its centre and perpendicular to its plane.
[MARCH – 2019]
17. Two waves of wavelength 99 cm and 100 cm both travelling with the velocity of
396 ms–1 are made to interfere. Calculate the number of beats produced by them
per sec. [MARCH – 2019]
18. A ball is thrown vertically upwards with the speed of 19.6 ms–1 from the top of a
building and reaches the earth in 6 s. Find the height of the building.
[MARCH – 2019]
19. An object is thrown with initial speed 5ms–1 with an angle of projection 300.
Calculate the maximum height reached and the horizontal range. [MARCH – 2020]
20. A force of (4𝑖̂ − 3𝑗̂ + 5𝑘̂) N is applied at a point whose position vector is
(7𝑖̂ + 4𝑗̂ − 2𝑘̂)m. Find the torque of force about the origin. [MARCH – 2020]
21. From a point on the ground, the top of a tree is seen to have an angle of elevation
600. The distance between the tree and a point is 50 m. Calculate the height of the
tree. [MARCH – 2020]
22. A train was moving at the rate of 54 kmh–1 when brakes were applied. It came to
rest within a distance of 225 m. Calculate the retardation produced in the train.
[SEPTEMBER – 2020]
23. Suppose we go 200 km above and below the surface of the Earth, what are the g
values at these two points? In which case, is the value of g small?
[SEPTEMBER – 2020]
24. Calculate the amplitude, angular frequency, frequency, time period and initial phase
of the simple harmonic oscillation for the given equation y = 0.3 sin (40πt + 1.1).
[SEPTEMBER – 2020]
[ Turn Over
4
11105
-O0O–
.
REVISION EXAMINATION (NUMERICAL PROBLEMS) – FEBRUARY 2023
ANSWER KEY
PART – II
Note : Answer All the questions. 14x2=28
𝑚𝑣2 60 X 50 X 50
1. Centrifugal force is given by, F = ;= ; = 6 x 2500
cf
𝑟 10
Fcf =15000 N
QL 300 3
4. The efficiency of heat engine is given by η = 1 − ;η=1− ;=1− ;
QH 500 5
η = 1 − 0.6 ; 0.4
The heat engine has 40% efficiency, implying that this heat engine converts only
40% of the input heat into work.
5. T 𝖺 √𝑙 ; T = constant √𝑙
𝑇 1+ 44 𝑙
𝑓
=√ 100 ; √1.44 = 1.2 ;
𝑇𝑖 𝑙
Therefore, Tf = 1.2 Ti = Ti + 20% Ti
6. ⃗L→ = r→ x ⃗ω ⃗→ ; 8 𝑗→
⃗→ ; = 2𝑖→ x 4 𝑘
2
8. (a) The kinetic energy of the mass is given by KE = P
2m
(20)2 400
For the object of mass 2kg, kinetic energy is KE = = = 100J
1
2X2 4
For the object of mass 4kg, kinetic energy is KE = (20)2
=
400
= 50J
2
2X4 8
the kinetic energy of both masses is not the same. The kinetic energy of the heavier
object has lesser kinetic energy than smaller mass.
(b) As the momentum, p = mv, the two objects will not have same speed.
9. v = 80s , v = 1460 ms-1, D = ?
vt 1460 X 80
D= = ; = 1460 x 40 ; 58400m
2 2
D = 58.4km
10. X = 2 – 5t + 6t2
𝑑𝑥 𝑑
Velocity 𝑣 = = (2 − 5𝑡 + 6𝑡2) or v = –5 + 12t
𝑑𝑡 𝑑𝑡
For initial velocity, t = 0. Initial velocity = –5 ms-1
5
13. For the object of mass 2.5 kg, the acceleration is a = 𝐹 = ; = 2ms-2
𝑚 2.5
5
For the object of mass 100 kg, the acceleration is a = 𝐹
= ; = 0.05ms-2
𝑚 100
14. From the safe turn condition, the speed of the vehicle (v) must be less than or equal
√μsrg ; 𝑣 ≤ √μsrg ; √μsrg = √0.81 x 10 x 10 = 9 ms-1
For car C, √μsrg is less than 𝑣
The speed of car A, B and C are 7 ms-1, 8 ms-1 and 10 ms-1 respectively. The cars A
and B will have safe turns. But the car C has speed 10 ms-1 while it turns which
exceeds the safe turning speed. Hence, the car C will skid.
PART – III
Note : Answer All the questions. 14x3=42
𝑖̂ 𝑗̂ 𝑘̂
15. 𝑟→ = 𝑟→ x⃗𝐹→ = | 2 3 5 |
3 −2 4
= (12− (−10) 𝑖̂ + (15−8) 𝑗̂ + (−4−9) 𝑘̂ ; 𝑟 ̂
⃗→= 22𝒊̂ + 7𝖩̂ −13 𝒌
v 396 v 396
17. Frequency of first wave f1 = = ; Frequency of second wave f2 = =
λ1 0.96 λ2 1
1 1
Thus number of beat produced per second b = f1 - f2 ; = 396 [ − ];b=4
0.99 1
18. The ball is thrown upwards with velocity 19.6 m/s. During the upward motion it
experiences -9.8 m/s² acceleration due to which it comes to rest momentarily at the
highest point in air. We can calculate the time taken to reach the highest point.
v = u + at; 0 = 19.6 - 9.8 t; t = 2 sec
So the ball reaches the topmost point in air in 2 seconds.
Distance travelled by the ball until it reaches the highest point:
s = ut + at²/2 = 19.6 ×2 + 9.8 × 2²/2 s = 19.6×2 + 19.6 = 19.6×3 = 58.8 m
Hence the ball travels 58.8 m above the height of tower after throwing. Now the ball
comes down and experiences an acceleration of +9.8 m/s².
The time in which it reaches down from the highest point is 4 sec (6-2) because 2 sec
is consumed in reaching the highest point.
Now let us calculate the distance travelled by the ball to reach the earth in 4 sec.
s = ut + at²/2 s = 0×t +9.8× 4²/2 s = 9.8× 8 m This distance also includes the distance
from the throwing point to the highest point, ie 58.8m.
So we need to subtract that distance from this calculated distance of 9.8×8 m.
So height of tower = 9.8× 8 - 58.8 = 9.8×8 - 9.8×3 = 9.8×5 = 49 m. Hence height of
the tower is 49 m.
u2sin2θ
19. i) maximum height of the projectile, hmax = 2g
1 1
52 sin300 sin 300
25 X [ ] X [ ] 25 25
hmax = ;= 2 2 ;= ;= ; hmax = 0.3188m
2 X 9.8 2 X 9.8 8 X 9.8 78.4
𝑖̂ 𝑗̂ 𝑘̂
20. 𝑟→ = 𝑟→x𝐹→ = |7 4 −2 |
4 −3 5
= (20 −6) 𝑖̂ − (35 +8) 𝑗̂ + (−21−16) 𝑘̂ ;
= (14𝑖̂ − 43𝑗̂ − 37 𝑘̂) Nm
ℎ
21. For triangulation method tan θ =
𝑥
h = 𝒙 tan θ ; = 50 × tan 600 ; = 50 × 1.732
h = 86.6 m; The height of the tree is 86.6 m.
d 200 X 103
23. g′ = g (1 − ) ; = (1 − ) ; = g (1 – 0.0314) ; = g (0.9686)
RE 6371 X 103
g′ =0.96 g
Variation of g′ with altitude
2h 2 X 200 X 103
g′ = g (1 − ) ; = (1 − ) ; = g (1 – 2(0.0314)) ; = g (0.9372)
RE 6371 X 103
g′ =0.94 g
24. y = A sin (𝜔𝑡 + 𝜑0)
Amplitude A = 0.3 unit
Angular frequency 𝜔 = 40𝜋 rad s-1
ω 40π
Frequency f = ;= f = 20 Hz
2π 2π
1 1
Time period T = ;= T = 0.05 sec.
f 20
Initial phase 𝜑0 : 1 : 1 rad
𝑖̂ 𝑗̂ 𝑘̂
26. ⃗A→ x⃗B→ = |4 −2 1 |
5 3 −4
= (8 – 3) 𝑖̂ + (5+16) 𝑗̂ + (12 + 10) 𝑘̂ ;
⃗A→ x⃗B→= 5𝑖̂ + 21𝑗̂ +22 𝑘̂
27. Work done on the system (by the person while stirring), W = −30 kJ = −30,000J
Heat flowing out of the system, Q = −5 kcal = −5×4184 J =−20920 J
Using First law of thermodynamics, ΔU = Q−W
ΔU = −20,920 J− (−30,000) J
ΔU = −20,920 J+30,000 J = 9080 J
Here, the heat lost is less than the work done on the system, so the change in
internal energy is positive.