ISO Update

February 2020
 International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step
towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical
committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat
for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting
a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria
remaining the same.

CD registered

Period from 01 January to 01 February 2020

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 4 Rolling bearings

ISO/CD 492 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and
tolerance values

TC 17 Steel

ISO/DIS 23475-1 Testing method for steel tyre cord — Part 1: General requirements

TC 20 Aircraft and space vehicles

ISO/CD 22591.3 Space systems — Space-based service for a positioning system with high accuracy and
safety support applications in low visibility due to weather conditions

TC 22 Road vehicles

ISO/CD TR 4609 Road vehicles — Report on standardization prospective for automated vehicles
(RoSPAV)

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 5682-4 Equipment for crop protection — Spraying equipment — Part 4: Test Methods for Tank
Agitation

TC 27 Coal and coke

ISO/CD 728 Coke (nominal top size greater than 20 mm) — Size analysis by sieving

TC 31 Tyres, rims and valves

ISO/CD 15222 Truck and bus tyres — Method for measuring relative wet grip performance — Loaded
new tyres
ISO/CD 3739-2 Industrial tyres and rims — Part 2: Pneumatic tyres (metric series) on 5 degrees tapered
or flat base rims — Load ratings

ISO/CD 3739-3 Industrial tyres and rims — Part 3: Rims

TC 34 Food products

ISO/DIS 8196-3 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk
analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative
methods of milk analysis

ISO/CD 29981 Milk products — Enumeration of bifidobacteria — Colony count technique at 37 degrees
C

TC 37 Language and terminology

ISO/CD 23155 Interpreting services — Conference interpreting — Requirements and recommendations

TC 41 Pulleys and belts (including veebelts)

ISO/CD 23586 Conveyor belts — Indentation rolling resistance related to belt width — Requirements,
testing

TC 43 Acoustics

ISO/CD 10844 Acoustics — Specification of test tracks for measuring noise emitted by road vehicles
and their tyres

ISO/CD 3382-3 Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices

TC 45 Rubber and rubber products

ISO/CD 8330 Rubber and plastics hoses and hose assemblies — Vocabulary

ISO/CD 27126 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer
of hydrocarbons, solvents and chemicals — Specification

ISO/CD 27127 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer
of liquid petroleum gas and liquefied natural gas — Specification

TC 46 Information and documentation

ISO/CD 233-3 Information and documentation — Transliteration of Arabic characters into Latin
characters — Part 3: Persian language — Simplified transliteration

ISO/CD 23527 Information and documentation — Research activity identifier information technology —
Learning, education, training and research (RAiD)

TC 58 Gas cylinders

ISO/CD 4706 Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below

ISO/CD 9809-4 Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and
testing — Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa

ISO 11439:2013/CD Amd 1.2 Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel
for automotive vehicles — Amendment 1

TC 59 Buildings and civil engineering works

ISO/CD TR 22845 Resilience of buildings and civil engineering works

TC 61 Plastics

IEC/CD 62321-11 Determination of certain substances in electrotechnical products — Part 11:

Determination of Tris (2-chloroethyl) phosphate (TCEP) in plastics by gas
chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass
spectrometry (LC-MS)

ISO/CD 23517-1 Plastics — Biodegradable mulch films for use in agriculture and horticulture — Part 1:
Requirements and test methods regarding biodegradation, ecotoxicity and control of
constituents
ISO/CD TR 23891 Plastics - Recycling — Necessity of standards

TC 68 Financial services

ISO/CD 24165 Reference data for financial services — Digital token identifier — Registration,
assignment and structure

ISO/CD 24165-1 Reference data for financial services — Digital token identifier — Registration,
assignment and structure — Part 1: Method for registration and assignment

ISO/CD 24165-2 Reference data for financial services — Digital token identifier — Registration,
assignment and structure — Part 2: Data elements for registration

TC 69 Applications of statistical methods

ISO/CD 3951-1 Sampling procedures for inspection by variables — Part 1: Specification for single
sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a
single quality characteristic and a single AQL

ISO/CD 28596 Sampling procedures by attributes — Two-stage sampling plans for auditing and lot
inspection under prior information

TC 92 Fire safety

ISO 6944-1:2008/CD Amd 2 Fire containment — Elements of building construction — Part 1: Ventilation ducts —
Amendment 2

TC 108 Mechanical vibration, shock and condition monitoring

ISO/CD TR 22704 Mechanical vibration - Uncertainty of the measurement and evaluation of human
exposure to vibration

TC 123 Plain bearings

ISO/CD 7905-1 Plain bearings — Bearing fatigue — Part 1: Plain bearings in test rigs and in applications
under conditions of hydrodynamic lubrication

TC 126 Tobacco and tobacco products

ISO 20193:2019/CD Amd 1 Tobacco and tobacco products — Determination of the width of the strands of cut
tobacco — Amendment 1

TC 130 Graphic technology

ISO/CD TS 23031.4 Graphic technology — Assessment and validation of the performance of

spectrocolorimeters and spectrodensitometers

TC 135 Non-destructive testing

ISO/CD 9712 Non-destructive testing — Qualification and certification of NDT personnel

TC 145 Graphical symbols

ISO/CD 22578 Graphical Symbols — Safety colours and safety signs — Natural disaster safety way
evacuation guidance system

TC 146 Air quality

ISO/CD 10849 Stationary source emissions — Determination of the mass concentration of nitrogen
oxides — Performance characteristics of automated measuring systems

ISO/CD 23320 Workplace air — Procedures for measuring gases and vapours using diffusive samplers
— Requirements and test methods

ISO/CD 23032 Meteorology — Ground-based remote sensing of wind — Radar wind profiler

TC 150 Implants for surgery

ISO/CD 24085-1 Implants for Surgery — Partial and total shoulder joint prosthesis — Part 1:
Determination of resistance to static load of ceramic humeral heads and glenospheres

ISO/CD 24085-2 Implants for Surgery — Partial and total shoulder joint prosthesis — Part 2:
Determination of resistance to torque off head fixation of modular humeral prostheses
TC 159 Ergonomics

ISO/CD 23979 Ergonomics — Accessible design — Ease of operation

TC 165 Timber structures

ISO/CD 22156.3 Bamboo — Structural design

TC 171 Document management applications

ISO/CD 16684-3 Graphic technology — Extensible metadata platform (XMP) — Part 3: JSON-LD
serialization of XMP

TC 188 Small craft

ISO/CD 21487 Small craft — Permanently installed petrol and diesel fuel tanks

TC 190 Soil quality

ISO/CD 23992 Soil quality — Framework for detailed recording and monitoring of changes in dynamic
soil properties

TC 201 Surface chemical analysis

ISO/CD 17862 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity
scale in single ion counting time-of-flight mass analysers

ISO/CD 18114 Surface chemical analysis — Secondary-ion mass spectrometry — Determination of

relative sensitivity factors from ion-implanted reference materials

TC 206 Fine ceramics

ISO/CD 23946 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for
optical properties of ceramic phosphors for white light emitting diodes using a Gonio-
spectrofluorometer

TC 211 Geographic information/Geomatics

ISO 19135-1:2015/CD Amd 1 Geographic information — Procedures for item registration — Part 1: Fundamentals —
Amendment 1

ISO/CD TR 19169 Geographic information — Gap analysis between Geographic Data Files (GDF) and
conceptual models of geographic information

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

ISO/CD 20166-4 Molecular in vitro diagnostic examinations — Specifications for preexamination

processes for formalin-fixed and paraffin-embedded (FFPE) tissue — Part 4: in situ
detection techniques

TC 224 Service activities relating to drinking water supply, wastewater and

stormwater systems

ISO/CD TR 24539 Examples of good practices for stormwater management

TC 229 Nanotechnologies

ISO/CD TS 12901-1 Nanotechnologies — Occupational risk management applied to engineered

nanomaterials — Part 1: Principles and approaches

ISO/CD TS 19337 Nanotechnologies — Characteristics of working suspensions of nano-objects for in vitro

assays to evaluate inherent nano-object toxicity

ISO/CD TS 23459 Nanotechnologies — Assessment of protein secondary structure during an interaction

with nanomaterials using circular dichroism spectroscopy

TC 249 Traditional Chinese medicine

ISO/CD 23963-1 Traditional Chinese Medicine — requirements for process traceability system of Chinese
materia medica and decoction pieces — Part 1: components

ISO/CD 23963-2 Traditional Chinese Medicine — requirements for process traceability system of Chinese
materia medica and decoction pieces — Part 2: electronic labelling
TC 260 Human resource management

ISO 30401:2018/CD Amd 1 Knowledge management systems — Requirements — Amendment 1: Knowledge

management systems — Requirements

TC 264 Fireworks

ISO/CD 22863-11 Fireworks — Test methods for determination of specific chemical substances — Part 11:
Phosphorus content by Inductively Coupled Plasma Atomic Emission Spectrometry

ISO/CD 22863-12 Fireworks — Test methods for determination of specific chemical substances — Part 12:
Picrates/picric acid by high performance liquid chromatography.

TC 268 Sustainable cities and communities

ISO 37106:2018/CD Amd 1 Sustainable cities and communities — Guidance on establishing smart city operating
models for sustainable communities — Amendment 1

TC 269 Railway applications

ISO/CD 22752 Railway applications — Body side windows for railway rolling stock

TC 282 Water reuse

ISO/CD 20468-8 Guidelines for performance evaluation of treatment technologies for water reuse
systems — Part 8: Evaluation of treatment systems based on Life Cycle Cost

TC 292 Security and resilience

ISO/DIS 22300 Security and resilience — Vocabulary

ISO/CD TR 22351 Security and resilience — Emergency management — Message structure for exchange
of information

TC 298 Rare earth

ISO/CD 22927 Rare earth — Packaging and Labelling

TC 306 Foundry machinery

ISO/CD 23472-3 Foundry machinery — Terminology — Part 3: Die casting machines and other equipment
related to permanent mold casting process

TC 307 Blockchain and distributed ledger technologies

ISO/CD 23257.3 Blockchain and distributed ledger technologies — Reference architecture

TC 314 Ageing societies

ISO/CD 23617 Ageing societies — Guidelines for an age inclusive work force

JTC 1 Information technology

ISO/IEC CD 4972 Information technology - Linear Tape File System (LTFS) Format Specification

ISO/IEC/IEEE CD 26514 Systems and software engineering — Design and development of information for users

ISO/IEC CD 29121 Information technology — Digitally recorded media for information interchange and
storage — Data migration method for optical disks for long-term data storage

ISO/IEC 10116:2017/CD Amd Information technology — Security techniques — Modes of operation for an n-bit block
1 cipher — Amendment 1

ISO/IEC CD TR 19583-2 Information technology — Concepts and usage of metadata — Part 2: Metadata usage

ISO/IEC CD 20071-5 Information technology — User interface component accessibility — Part 5: Accessible
user interface for accessibility settings on information devices

ISO/IEC CD 22123-2 Information technology — Cloud computing — Part 2: Concepts

ISO/IEC CD 22237-1.2 Information technology — Data centre facilities and infrastructures — Part 1: General
 concepts

ISO/IEC CD 23544.2 Information Technology — Data Centres — Application Platform Energy

Effectiveness(APEE)

ISO/IEC CD 30134-8.2 Information technology — Data centres — Key performance indicators — Part 8: Carbon
Usage Effectiveness (CUE)

ISO/IEC CD 30134-9.2 Information technology — Data centres — Key performance indicators — Part 9: Water
Usage Effectiveness (WUE)

ISO/IEC CD TR 24030 Information technology — Artificial Intelligence (AI) — Use cases

DIS circulated

Period from 01 January to 01 February 2020

These documents have obtained substantial support within the appropriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

IIW International Institute of Welding

ISO/DIS 23864 Non‐destructive testing of welds — Ultrasonic testing — Use of

(semi‐) automated full matrix capture / total focusing 2020-04-02
technique (FMC/TFM)

ISO/DIS 23865 Non-destructive testing — Ultrasonic testing — General use of

full matrix capture / total focusing technique (FMC/TFM) 2020-04-02

TC 8 Ships and marine technology

ISO/DIS 21851 Marine technology - Ocean observation system - Design

criteria of ocean hydrology-meteorological observation system 2020-04-20
reuse and interaction

TC 10 Technical product documentation

ISO/DIS 7083 Technical Product Documentation — Symbols used on

technical product documentation — Proportions and 2020-03-31
dimensions
(Revision of ISO 7083:1983)

TC 12 Quantities and units

IEC/DIS 80000-6 Quantities and units — Part 6: Electromagnetism

2020-03-31
 (Revision of IEC 80000-6:2008)

TC 17 Steel

ISO/DIS 630-2 Structural steels — Part 2: Technical delivery conditions for

structural steels for general purposes 2020-04-13

(Revision of ISO 630-2:2011)

TC 20 Aircraft and space vehicles

ISO/DIS 20291-1 Air cargo — Restraint slings — Part 1: Design and testing
2020-04-16

ISO/DIS 20291-2 Air cargo — Restraint slings — Part 2: Utilization guidelines

and lashing calculations 2020-04-16

ISO 11227:2012/DAmd 1 Space systems — Test procedure to evaluate spacecraft

material ejecta upon hypervelocity impact — Amendment 1: 2020-04-17
Oblique impacts and Annex C update

TC 21 Equipment for fire protection and fire fighting

ISO/DIS 7240-13 Fire detection and alarm systems — Part 13: Compatibility
assessment of system components 2020-04-09

(Revision of ISO 7240-13:2005)

TC 22 Road vehicles

ISO/DIS 11992-3 Road vehicles — Interchange of digital information on

electrical connections between towing and towed vehicles — 2020-04-01
Part 3: Application layer for equipment other than brakes and
running gear
(Revision of ISO 11992-3:2003, ISO 11992-3:2003/Amd
1:2008)

ISO/DIS 21233 Heavy commercial vehicles and buses — Vehicle dynamics

simulation and validation — Closing-curve test 2020-03-30

ISO/DIS 21498-1 Electrically propelled road vehicles — Electrical specifications

and tests for voltage class B systems and components — Part 2020-04-22
1: Voltage sub-classes and characteristics
(Revision of ISO/PAS 19295:2016)

TC 23 Tractors and machinery for agriculture and

forestry

ISO/DIS 22172-2 Agricultural machinery and tractors — Repair and

maintenance information — Part 2: Vehicle on-board 2020-04-09
diagnostics

ISO/DIS 22471 Permissible mechanical connection combinations between

towed and towing agricultural vehicles 2020-04-02

ISO 3767-1:2016/DAmd 1 Tractors, machinery for agriculture and forestry, powered

lawn and garden equipment — Symbols for operator controls 2020-04-02
and other displays — Part 1: Common symbols — Amendment
1
ISO 3767-2:2016/DAmd 1 Tractors, machinery for agriculture and forestry, powered
lawn and garden equipment — Symbols for operator controls 2020-04-02
and other displays — Part 2: Symbols for agricultural tractors
and machinery — Amendment 1

TC 24 Particle characterization including sieving

ISO/DIS 13322-2 Particle size analysis — Image analysis methods — Part 2:

Dynamic image analysis methods 2020-03-27

(Revision of ISO 13322-2:2006)

TC 27 Coal and coke

ISO/DIS 1928 Solid mineral fuels — Determination of gross calorific value

2020-04-23

(Revision of ISO 1928:2009)

TC 31 Tyres, rims and valves

ISO 3877-4:1984/DAmd 1 Tyres, valves and tubes — List of equivalent terms — Part 4:
Solid tyres — Amendment 1 2020-04-10

ISO 4223-2:1991/DAmd 1 Definitions of some terms used in the tyre industry — Part 2:
Solid tyres — Amendment 1 2020-04-08

ISO/DIS 4250-3 Earth-mover tyres and rims — Part 3: Rims

2020-04-09

(Revision of ISO 4250-3:2011)

TC 34 Food products

ISO/DIS 24220 Paocai (salted fermented vegetables) — Specification and test

methods 2020-04-03

ISO/DIS 21543 Milk and milk products — Guidelines for the application of
near infrared spectrometry 2020-04-08

(Revision of ISO 21543:2006)

ISO/DIS 23970 Milk, milk products and infant formulae — Determination of

melamine and cyanuric acid by liquid chromatography and 2020-04-24
tandem mass spectrometry (LC-MS/MS)

ISO/DIS 20836 Microbiology of the food chain — Polymerase chain reaction

(PCR) for the detection of food-borne pathogens — Thermal 2020-04-02
performance testing of thermal cyclers
(Revision of ISO/TS 20836:2005)

ISO/DIS 11132 Sensory analysis — Methodology — Guidelines for monitoring

the performance of a quantitative sensory panel 2020-04-23

(Revision of ISO 11132:2012)

TC 35 Paints and varnishes

ISO/DIS 3219-1 Rheology — Part 1: General terms and definitions for
rotational and oscillatory rheometry 2020-04-13

(Revision of ISO 3219:1993)

ISO/DIS 3219-2 Rheology — Part 2: General principles of rotational and

oscillatory rheometry 2020-04-13

(Revision of ISO 3219:1993)

TC 38 Textiles

ISO/DIS 5079 Textile fibres — Determination of breaking force and

elongation at break of individual fibres 2020-03-27

(Revision of ISO 5079:1995)

ISO/DIS 21765 Textiles — Determination of fabric deformability by forced

mechanical distension 2020-04-10

TC 43 Acoustics

ISO/DIS 22955 Acoustics — Acoustic quality of open office spaces

2020-04-23

ISO/DIS 9053-2 Acoustics — Determination of airflow resistance — Part 2:

Alternating airflow method 2020-04-02

TC 45 Rubber and rubber products

ISO/DIS 3861 Rubber hoses and hose assemblies for sand and grit blasting
— Specification 2020-04-10

(Revision of ISO 3861:2005)

ISO/DIS 3949 Plastics hoses and hose assemblies — Textile-reinforced types

for hydraulic applications — Specification 2020-04-10

(Revision of ISO 3949:2018)

ISO/DIS 7233 Rubber and plastics hoses and hose assemblies —

Determination of resistance to vacuum 2020-04-17

(Revision of ISO 7233:2016)

ISO/DIS 10619-2 Rubber and plastics hoses and tubing — Measurement of

flexibility and stiffness — Part 2: Bending tests at sub-ambient 2020-04-10
temperatures
(Revision of ISO 10619-2:2017)

ISO/DIS 23384 Rubber and plastics hoses and hose assemblies, wire or
textile reinforced types with working pressure equal or above 2020-04-10
70 MPa (700 bar) — Specification
(Revision of ISO 19385:2017/Amd 1:2019, ISO 19385:2017)
ISO/DIS 2000 Rubber, raw natural — Guidelines for the specification of
technically specified rubber (TSR) 2020-04-03

(Revision of ISO 2000:2014)

ISO/DIS 4652 Rubber compounding ingredients — Carbon black —

Determination of specific surface area by nitrogen adsorption 2020-04-15
methods — Single-point procedures
(Revision of ISO 4652:2012)

ISO/DIS 4658 Acrylonitrile-butadiene rubber (NBR) — Evaluation procedure

2020-04-15

(Revision of ISO 4658:1999, ISO 4658:1999/Amd 1:2004)

ISO/DIS 22768 Raw rubber and rubber latex — Determination of the glass
transition temperature by differential scanning calorimetry 2020-04-06
(DSC)
(Revision of ISO 22768:2017)

TC 54 Essential oils

ISO/DIS 3044 Essential oil of Corymbia citriodora (Hook.) K.D. Hill & L.A.S.
Johnson (syn. Eucalyptus citriodora Hook) 2020-04-17

(Revision of ISO 3044:1997)

TC 58 Gas cylinders

ISO 16148:2016/DAmd 1 Gas cylinders — Refillable seamless steel gas cylinders and
tubes — Acoustic emission examination (AT) and follow-up 2020-04-02
ultrasonic examination (UT) for periodic inspection and testing
— Amendment 1

TC 61 Plastics

ISO/DIS 23512 Plastics — Joining of thermoplastic moulded components —

Specification of variables for thermal joining processes 2020-04-15

ISO/DIS 23976 Plastics — Fast differential scanning calorimetry — Chip

calorimetry 2020-04-10

ISO/DIS 23977-1 Plastics — Determination of the aerobic biodegradation of

plastic materials exposed to seawater — Part 1: Method by 2020-04-13
analysis of evolved carbon dioxide

ISO/DIS 23977-2 Plastics — Determination of the aerobic biodegradation of

plastic materials exposed to seawater — Part 2: Method by 2020-04-13
measuring the oxygen demand in closed respirometer

TC 68 Financial services

ISO/DIS 17442-1 Financial services — Legal entity identifier (LEI) — Part 1:

Assignment 2020-04-17

(Revision of ISO 17442:2019)

ISO/DIS 17442-2 Financial services — Legal entity identifier (LEI) — Part 2:

Application in digital certificates 2020-04-17
 (Revision of ISO 17442:2019)

ISO/DIS 23897 Financial Services — Unique transaction identifier (UTI)

2020-04-20

TC 70 Internal combustion engines

ISO/DIS 8528-3 Reciprocating internal combustion engine driven alternating

current generating sets — Part 3: Alternating current 2020-04-10
generators for generating sets
(Revision of ISO 8528-3:2005)

ISO/DIS 11102-1 Reciprocating internal combustion engines — Handle starting

equipment — Part 1: Safety requirements and tests 2020-04-09

(Revision of ISO 11102-1:1997)

TC 71 Concrete, reinforced concrete and pre-stressed

concrete

ISO/DIS 22040 Life cycle management of concrete structures

2020-04-13

TC 85 Nuclear energy, nuclear technologies, and

radiological protection

ISO/DIS 8529-1 Reference neutron radiations fields — Part 1: Characteristics

and methods of production 2020-04-22

(Revision of ISO 8529-1:2001)

ISO/DIS 16640 Monitoring radioactive gases in effluents from facilities

producing positron emitting radionuclides and 2020-04-03
radiopharmaceuticals

ISO/DIS 23133 Nuclear criticality safety – Nuclear criticality safety training for
operations 2020-04-06

ISO/DIS 23467 Ice plug isolation of piping in nuclear power plant

2020-04-23

TC 92 Fire safety

ISO/DIS 13784-2 Reaction-to-fire tests for sandwich panel building systems —

Part 2: Test method for large rooms 2020-04-24

(Revision of ISO 13784-2:2002)

ISO/DIS 20414 Fire safety engineering — Verification and validation protocol

for building fire evacuation models 2020-04-07

TC 98 Bases for design of structures

ISO/DIS 8930 General principles on reliability for structures — Vocabulary

2020-04-21
 (Revision of ISO 8930:1987)

TC 106 Dentistry

ISO/DIS 10477 Dentistry — Polymer-based crown and veneering materials

2020-04-21

(Revision of ISO 10477:2018)

ISO/DIS 23402-1 Dentistry — Portable dental equipment for use in non‐

permanent healthcare environment — Part 1: General 2020-04-09
requirements

TC 107 Metallic and other inorganic coatings

ISO/DIS 14571 Metallic coatings on nonmetallic basis materials —

Measurement of coating thickness — Microresistivity method 2020-04-13

TC 119 Powder metallurgy

ISO/DIS 28080 Hardmetals — Abrasion tests for hardmetals

2020-04-09

(Revision of ISO 28080:2011)

TC 120 Leather

ISO/DIS 14931 Leather — Guide to the selection of leather for apparel

(excluding furs) 2020-04-08

(Revision of ISO 14931:2015)

TC 121 Anaesthetic and respiratory equipment

ISO/DIS 80601-2-87 Medical electrical equipment — Part 2-87: Particular

requirements for basic safety and essential performance of 2020-04-10
high-frequency ventilators

ISO 15002:2008/DAmd 2 Flow-metering devices for connection to terminal units of

medical gas pipeline systems — Amendment 2 2020-03-27

ISO/DIS 10079-4 Medical suction equipment — Part 4: General requirements

2020-03-27

TC 123 Plain bearings

ISO/DIS 7905-4 Plain bearings — Bearing fatigue — Part 4: Tests on half-

bearings of a metallic multilayer bearing material 2020-04-23

(Revision of ISO 7905-4:1995)

TC 127 Earth-moving machinery

ISO/DIS 16417 Earth-moving machinery — Hydraulic Breakers — Terminology

and commercial specifications 2020-04-13
TC 130 Graphic technology

ISO/DIS 12647-6 Graphic technology — Process control for the production of

half-tone colour separations, proofs and production prints — 2020-04-09
Part 6: Flexographic printing
(Revision of ISO 12647-6:2012, ISO 12647-6:2012/Amd
1:2015)

ISO/DIS 22934 Graphic technology — Communication of offset ink properties

2020-04-09

TC 134 Fertilizers, soil conditioners and beneficial

substances

ISO/DIS 19747 Fertilizers and soil conditioners — Determination of

monosilicic acid concentrations in nonliquid fertilizer materials 2020-04-02

ISO/DIS 22145 Fertilizers and soil conditioners—Mineral soil amendments —

Determination of total Calcium and Magnesium content 2020-03-27

ISO/DIS 23381 Determination of Salt Out (Crystallization) Temperature of

Liquid Fertilizers 2020-03-27

TC 138 Plastics pipes, fittings and valves for the

transport of fluids

ISO 15494:2015/DAmd 1 Plastics piping systems for industrial applications —

Polybutene (PB), polyethylene (PE), polyethylene of raised 2020-04-13
temperature resistance (PE-RT), crosslinked polyethylene (PE-
X), polypropylene (PP) — Metric series for specifications for
components and the system — Amendment 1

TC 145 Graphical symbols

ISO 7010:2019/DAmd 109 Graphical symbols — Safety colours and safety signs —
Registered safety signs — Amendment 109: Safety sign F017: 2020-03-30
Firefighter’s lift

ISO 7010:2019/DAmd 110 Graphical symbols — Safety colours and safety signs —
Registered safety signs — Amendment 110: Safety sign 2020-03-30
W071: Warning; Substance/mixture presenting a health
hazard

ISO 7010:2019/DAmd 111 Graphical symbols — Safety colours and safety signs —
Registered safety signs — Amendment 111: Safety sign 2020-03-30
W072: Warning; Substance/mixture that can cause an
environmental hazard

TC 147 Water quality

ISO/DIS 13162 Water quality — Carbon 14 — Test method using liquid

scintillation counting 2020-04-21

(Revision of ISO 13162:2011)

TC 150 Implants for surgery

ISO/DIS 16061 Instruments for use in association with non-active surgical

implants — General requirements 2020-04-09

(Revision of ISO 16061:2015)

ISO/DIS 27186 Active implantable medical devices — Four-pole connector
system for implantable cardiac rhythm management devices - 2020-04-01
Dimensional and test requirements
(Revision of ISO 27186:2010)

TC 153 Valves

ISO/DIS 6002 Industrial valves - Bolted bonnet steel gate valves

2020-04-22

(Revision of ISO 6002:1992)

TC 156 Corrosion of metals and alloys

ISO/DIS 8407 Corrosion of metals and alloys — Removal of corrosion

products from corrosion test specimens 2020-04-06

(Revision of ISO 8407:2009)

ISO/DIS 23449 Corrosion of metals and alloys — Multielectrode arrays for

corrosion measurement 2020-03-31

TC 158 Analysis of gases

ISO/DIS 19230 Gas analysis — Sampling guidelines

2020-04-08

TC 160 Glass in building

ISO/DIS 12543-1 Glass in building — Laminated glass and laminated safety

glass — Part 1: Definitions and description of component parts 2020-04-13

(Revision of ISO 12543-1:2011)

ISO/DIS 12543-2 Glass in building — Laminated glass and laminated safety

glass — Part 2: Laminated safety glass 2020-04-13

(Revision of ISO 12543-2:2011)

ISO/DIS 12543-3 Glass in building — Laminated glass and laminated safety

glass — Part 3: Laminated glass 2020-04-13

(Revision of ISO 12543-3:2011)

ISO/DIS 12543-4 Glass in building — Laminated glass and laminated safety

glass — Part 4: Test methods for durability 2020-04-13

(Revision of ISO 12543-4:2011)

ISO/DIS 12543-5 Glass in building — Laminated glass and laminated safety

glass — Part 5: Dimensions and edge finishing 2020-04-13

(Revision of ISO 12543-5:2011)

ISO/DIS 12543-6 Glass in building — Laminated glass and laminated safety

glass — Part 6: Appearance 2020-04-13
 (Revision of ISO 12543-6:2011, ISO 12543-6:2011/Cor 1:2012)

TC 164 Mechanical testing of metals

ISO/DIS 12135 Metallic materials — Unified method of test for the

determination of quasistatic fracture toughness 2020-04-24

(Revision of ISO 12135:2016)

ISO/DIS 22407 Metallic materials — Fatigue testing — Axial plane bending

method 2020-04-06

TC 172 Optics and photonics

ISO 11978:2017/DAmd 1 Ophthalmic optics — Contact lenses and contact lens care
products — Labelling — Amendment 1 2020-04-21

TC 173 Assistive products

ISO/DIS 22748 Absorbent incontinence products for urine and/or faeces —

Terminology and classification 2020-03-30

(Revision of ISO 9949-1:1993, ISO 9949-2:1993, ISO 9949-

3:1993)

TC 174 Jewellery and precious metals

ISO/DIS 24016 Jewellery and precious metals — Grading polished diamonds

— Terminology, classification and test methods 2020-04-10

ISO/DIS 24018 Jewellery and precious metals — Specifications for 1 kilogram

gold bar 2020-03-30

TC 184 Automation systems and integration

ISO/DIS 10303-1 Industrial automation systems and integration — Product data

representation and exchange — Part 1: Overview and 2020-04-13
fundamental principles
(Revision of ISO 10303-1:1994)

ISO/DIS 22549-2 Automation systems and integration — Assessment on

convergence of informatization and industrialization for 2020-04-13
industrial enterprises — Part 2: Maturity model and evaluation
methodology

TC 190 Soil quality

ISO/DIS 10390 Soil, sludge and treated biowaste – Determination of pH

2020-04-01

(Revision of ISO 10390:2005)

TC 195 Building construction machinery and equipment

ISO/DIS 21573-2 Building construction machinery and equipment — Concrete

pumps — Part 2: Procedure for examination of technical 2020-04-03
 parameters
(Revision of ISO 21573-2:2008)

TC 202 Microbeam analysis

ISO/DIS 22029 Microbeam analysis — EMSA/MAS standard file format for

spectral-data exchange 2020-04-06

(Revision of ISO 22029:2012)

TC 204 Intelligent transport systems

ISO/DIS 20684-1 Intelligent transport systems — Roadside modules SNMP data

interface — Part 1: Overview 2020-04-23

ISO/DIS 20684-2 Intelligent transport systems — Roadside modules SNMP data

interface — Part 2: Generalized field device — Basic 2020-04-23
management

TC 205 Building environment design

ISO/DIS 22185-1 Diagnosing moisture damage in buildings and implementing

countermeasures — Part 1: Principles, nomenclature and 2020-04-03
moisture transport mechanisms

ISO/DIS 52032 Energy performance of buildings — Method for calculation of

system energy requirements and system efficiencies — Space 2020-04-14
distribution systems (DHW, heating and cooling), Module M3-
6, M4-6, M8-6

ISO/DIS 52120-1 Energy performance of buildings — Contribution of building

automation and controls and building management — Part 1: 2020-03-27
Modules M10-4,5,6,7,8,9,10

TC 206 Fine ceramics

ISO/DIS 22278 Fine ceramics (advanced ceramics, advanced technical

ceramics) — Test method for crystalline quality of single- 2020-03-31
crystal thin film (wafer) using XRD method with parallel X-ray
beam

TC 207 Environmental management

ISO/DIS 14009 Environmental management systems — Guidelines for

incorporating material circulation in design and development 2020-03-30

ISO/DIS 14065 Greenhouse gases — Environmental information —

Requirements for bodies validating and verifying 2020-04-01
environmental information
(Revision of ISO 14065:2013)

TC 215 Health informatics

ISO/DIS 17439 Health informatics — Development of terms and definitions

for health informatics glossaries 2020-04-10

(Revision of ISO/TS 17439:2014)

ISO/DIS 18530 Health Informatics — Automatic identification and data

capture marking and labelling — Subject of care and 2020-04-10
individual provider identification
 (Revision of ISO/TS 18530:2014)

IEC/DIS 80001-1 Application of risk management for IT-networks incorporating

medical devices — Part 1: Roles, responsibilities and activities 2020-04-16

(Revision of IEC 80001-1:2010)

TC 216 Footwear

ISO/DIS 19574 Footwear and footwear components — Qualitative test

method to assess antifungal activity (growth test) 2020-04-03

TC 219 Floor coverings

ISO 10874:2009/DAmd 1 Resilient, textile and laminate floor coverings — Classification

— Amendment 1: Elimination of class 22+ 2020-04-09

ISO 20326:2016/DAmd 1 Resilient floor coverings — Specification for floor

panels/assembly for loose laying — Amendment 1: 2020-04-07
Requirements depending on the substrate

TC 227 Springs

ISO/DIS 22705-1 Springs — Measurement and test parameters — Part 1: Cold

formed cylindrical helical compression springs 2020-04-20

TC 232 Education and learning services

ISO/DIS 29991 Language learning services — Requirements

2020-04-10

(Revision of ISO 29991:2014)

TC 249 Traditional Chinese medicine

ISO/DIS 19609-1 Traditional Chinese medicine — Quality and safety of raw

materials and manufacturing products made with raw 2020-04-03
materials — Part 1: General requirements

ISO/DIS 19609-2 Traditional Chinese medicine — Quality and safety of raw

materials and manufacturing products made with raw 2020-04-03
materials — Part 2: Identity testing of constituents of herbal
origin

TC 255 Biogas

ISO/DIS 23590 Household biogas system requirements: design, installation,

operation, maintenance and safety 2020-04-06

TC 256 Pigments, dyestuffs and extenders

ISO/DIS 3262-19 Extenders — Specifications and methods of test — Part 19:

Precipitated silica 2020-04-24

(Revision of ISO 3262-19:2000)

ISO/DIS 3262-20 Extenders — Specifications and methods of test — Part 20:

Fumed silica 2020-04-24
 (Revision of ISO 3262-20:2000)

TC 265 Carbon dioxide capture, transportation, and

geological storage

ISO/DIS 27920 Carbon dioxide capture, transportation and geological storage

(CCS) — Quantification and Verification 2020-04-06

TC 267 Facility management

ISO/DIS 41014 Facility management — Development of facility management

strategy 2020-04-20

TC 281 Fine bubble technology

ISO/DIS 20304-1 Fine bubble technology — Water treatment applications —

Part 1: Test method for evaluating ozone fine bubble water 2020-04-09
generating systems by the decolorization of methylene blue

ISO/DIS 20480-4 Fine bubble technology — General principles for usage and
measurement of fine bubbles — Part 4: Terminology related to 2020-04-06
microbubble beds

ISO/DIS 24261-1 Fine bubble technology — Elimination method for sample

characterization — Part 1: Evaluation procedure 2020-04-24

TC 291 Domestic gas cooking appliances

ISO/DIS 21364-1 Domestic gas cooking appliances — Safety — Part 1: General

requirements 2020-04-23

ISO/DIS 21364-21 Domestic gas cooking appliances — Safety — Part 21:

Particular requirements for gas hobs, gas grills and gas 2020-04-23
griddles

ISO/DIS 21364-22 Domestic gas cooking appliances — Safety — Part 22:

Particular requirements for ovens and compartment grills 2020-04-23

TC 299 Robotics

ISO/DIS 18646-3 Robotics — Performance criteria and related test methods for
service robots — Part 3: Manipulation 2020-04-17

ISO/DIS 18646-4 Robotics — Performance criteria and related test methods for
service robots — Part 4: Lower-back support robots 2020-04-24

TC 301 Energy management and energy savings

ISO/DIS 50003 Energy management systems — Requirements for bodies

providing audit and certification of energy management 2020-04-06
systems
(Revision of ISO 50003:2014)

IULTCS International Union of Leather Technologists and

Chemists Societies

ISO/DIS 17130 Leather - Physical and mechanical tests - Determination of

dimensional change 2020-04-09
 (Revision of ISO 17130:2013)

JTC 1 Information technology

ISO/IEC DIS 24824-4 Information technology — Generic applications of ASN.1:

Cryptographic message syntax — Part 4: . 2020-04-10

ISO/IEC DIS 19770-11 Information technology — IT asset management — Part 11:

Requirements for bodies providing audit and certification of IT 2020-04-10
asset management systems

ISO/IEC DIS 13888-1 Information technology — Non-repudiation — Part 1: General

2020-04-14

(Revision of ISO/IEC 13888-1:2009)

ISO/IEC DIS 13888-3 Information technology — Non-repudiation — Part 3:

Mechanisms using asymmetric techniques 2020-04-14

(Revision of ISO/IEC 13888-3:2009)

ISO/IEC 18033-4:2011/DAmd Information technology — Security techniques — Encryption

1 algorithms — Part 4: Stream ciphers — Amendment 1: ZUC 2020-04-17

ISO/IEC DIS 27014 Information security, cybersecurity and privacy protection —

Governance of information security 2020-04-03

(Revision of ISO/IEC 27014:2013)

ISO/IEC DIS 27034-4 Information technology — Security techniques — Application

security — Part 4: Validation and verification 2020-03-31

ISO/IEC FDIS 14496-12/DAmd Information technology — Coding of audio-visual objects —

4 Part 12: ISO base media file format — Amendment 4: Compact 2020-04-06
movie fragments

ISO/IEC 14496-15:2019/DAmd Information technology — Coding of audio-visual objects —

1 Part 15: Carriage of network abstraction layer (NAL) unit 2020-04-15
structured video in the ISO base media file format —
Amendment 1: Improved support for tiling and layering

ISO/IEC 15444-4:2004/DAmd Information technology — JPEG 2000 image coding system:

1 Conformance testing — Part 4: — Amendment 1: High- 2020-04-17
throughput JPEG 2000 conformance testing

ISO/IEC 15444-5:2015/DAmd Information technology — JPEG 2000 image coding system:

1 Reference software — Part 5: — Amendment 1: Additional 2020-04-24
reference software for HTJ2K

ISO/IEC DIS 23002-7 Information technology — MPEG video technologies — Part 7:

Supplemental enhancement information messages for coded 2020-04-10
video bitstreams

ISO/IEC 23008-12:2017/DAmd Information technology — High efficiency coding and media

2 delivery in heterogeneous environments — Part 12: Image File 2020-04-10
Format — Amendment 2: Support for predictive image coding,
bursts, bracketing, and other improvements

ISO/IEC DIS 23090-3 Information technology — Coded representation of immersive

media — Part 3: Versatile video coding 2020-04-10

ISO/IEC DIS 23092-1 Information technology — Genomic information

representation — Part 1: Transport and storage of genomic 2020-04-06
information
 (Revision of ISO/IEC 23092-1:2019)

ISO/IEC DIS 23092-2 Information technology — Genomic information

representation — Part 2: Coding of genomic information 2020-04-10

(Revision of ISO/IEC 23092-2:2019)

ISO/IEC DIS 23092-4 Information technology — Genomic information

representation — Part 4: Reference software 2020-04-15

ISO/IEC DIS 23092-5 Information technology — Genomic information

representation — Part 5: Conformance 2020-04-03

ISO/IEC DIS 23094-1 Information technology — General video coding — Part 1:

Essential video coding 2020-04-06

ISO/IEC DIS 29158 Information technology — Automatic identification and data

capture techniques — Direct Part Mark (DPM) Quality 2020-04-15
Guideline
(Revision of ISO/IEC TR 29158:2011)

FDIS circulated

Period from 01 January to 01 February 2020

These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date
shown

* Available in English only

Vote terminates

IIW International Institute of Welding

ISO/FDIS 22688 Brazing — Quality requirements for brazing of metallic

materials 2020-03-26

COPOLCO Committee on consumer policy

ISO/IEC PRF Guide 76 Development of service standards — Recommendations for

addressing consumer issues

(Revision of ISO/IEC Guide 76:2008)

TC 2 Fasteners

ISO/FDIS 3506-1 Fasteners — Mechanical properties of corrosion-resistant

stainless steel fasteners — Part 1: Bolts, screws and studs 2020-02-27
with specified grades and property classes
 (Revision of ISO 3506-1:2009)

ISO/FDIS 3506-2 Fasteners — Mechanical properties of corrosion-resistant

stainless steel fasteners — Part 2: Nuts with specified grades 2020-02-27
and property classes
(Revision of ISO 3506-2:2009)

ISO/FDIS 3506-6 Fasteners — Mechanical properties of corrosion-resistant

stainless steel fasteners — Part 6: General rules for the 2020-02-27
selection of stainless steels and nickel alloys for fasteners

TC 5 Ferrous metal pipes and metallic fittings

ISO/FDIS 7369 Pipework — Metal hoses and hose assemblies — Vocabulary

2020-03-27

(Revision of ISO 7369:2004)

TC 8 Ships and marine technology

ISO/FDIS 16165 Ships and marine technology — Marine environment

protection — Vocabulary relating to oil spill response 2020-03-02

(Revision of ISO 16165:2013)

ISO/FDIS 22098 Ships and marine technology — Full-scale test method for
propeller cavitation observation and hull pressure 2020-03-17
measurement

TC 10 Technical product documentation

ISO/FDIS 128-100 Technical product documentation — General principles of

representation — Part 100: Index 2020-03-19

ISO 129-1:2018/PRF Amd 1 Technical product documentation (TPD) — Presentation of

dimensions and tolerances — Part 1: General principles —
Amendment 1

TC 20 Aircraft and space vehicles

ISO/PRF 21785 Air cargo unit load devices — Load distribution model

ISO/PRF 21894 Air cargo — Cargo stopper devices — Design and testing

ISO/PRF 7313 Aircraft — High temperature convoluted hose assemblies in

polytetrafluoroethylene (PTFE)

(Revision of ISO 7313:1984)

TC 21 Equipment for fire protection and fire fighting

ISO/PRF 7240-3 Fire detection and alarm systems — Part 3: Audible alarm
devices

(Revision of ISO 7240-3:2010)

ISO 7076-6:2016/PRF Amd 1 Fire protection — Foam fire extinguishing systems — Part 6:
Vehicle mounted compressed air foam systems —
Amendment 1

TC 22 Road vehicles

ISO/FDIS 11452-4 Road vehicles — Component test methods for electrical

disturbances from narrowband radiated electromagnetic 2020-03-23
 energy — Part 4: Harness excitation methods
(Revision of ISO 11452-4:2011)

ISO/PRF 9021 Motorcycles and mopeds — Controls — Types, positions and

functions

(Revision of ISO 9021:1988)

ISO/TR 21959-2 Road vehicles — Human performance and state in the context
of automated driving — Part 2: Considerations in designing
experiments to investigate transition processes

TC 28 Petroleum and related products, fuels and

lubricants from natural or synthetic sources

ISO 2176:1995/PRF Amd 1 Petroleum products — Lubricating grease — Determination of

dropping point — Amendment 1

ISO 3839:1996/PRF Amd 1 Petroleum products — Determination of bromine number of

distillates and aliphatic olefins — Electrometric method —
Amendment 1

ISO 8973:1997/PRF Amd 1 Liquefied petroleum gases — Calculation method for density
and vapour pressure — Amendment 1

ISO/PRF 23572 Petroleum products — Lubricating greases — Sampling of

greases

ISO/PRF 8222 Petroleum measurement systems — Calibration — Volumetric

measures, proving tanks and field measures (including
formulae for properties of liquids and materials)
(Revision of ISO 8222:2002)

TC 31 Tyres, rims and valves

ISO/FDIS 20911 Radio frequency identification (RFID) tyre tags — Tyre

attachment classification 2020-03-16

ISO/FDIS 20912 Conformance test methods for RFID enabled tyres

2020-03-19

TC 34 Food products

ISO 6579-1:2017/PRF Amd 1 Microbiology of the food chain — Horizontal method for the
detection, enumeration and serotyping of Salmonella — Part
1: Detection of Salmonella spp. — Amendment 1: Broader
range of incubation temperatures, amendment to the status
of Annex D, and correction of the composition of MSRV and SC

ISO/FDIS 6887-5 Microbiology of the food chain — Preparation of test samples,

initial suspension and decimal dilutions for microbiological 2020-03-18
examination — Part 5: Specific rules for the preparation of
milk and milk products
(Revision of ISO 6887-5:2010)

TC 37 Language and terminology

ISO/FDIS 29383 Terminology policies — Development and implementation

2020-03-16

(Revision of ISO 29383:2010)

ISO/FDIS 20771 Legal translation — Requirements

2020-02-28
ISO/PAS 24019:2020 Simultaneous interpreting delivery platforms — Requirements
and recommendations

TC 38 Textiles

ISO/FDIS 22195-1 Textiles — Determination of index ingredient from coloured

textiles — Part 1: Madder 2020-03-18

ISO/FDIS 22195-2 Textiles — Determination of index ingredient from coloured

textiles — Part 2: Turmeric 2020-03-24

ISO/FDIS 22744-1 Textiles and textile products — Determination of organotin

compounds — Part 1: Derivatisation method using gas 2020-03-23
chromatography

TC 39 Machine tools

ISO/FDIS 13041-1.2 Test conditions for numerically controlled turning machines

and turning centres — Part 1: Geometric tests for machines 2020-03-04
with horizontal workholding spindle(s)
(Revision of ISO 13041-1:2004)

ISO/FDIS 13041-2.2 Test conditions for numerically controlled turning machines

and turning centres — Part 2: Geometric tests for machines 2020-02-28
with a vertical workholding spindle
(Revision of ISO 13041-2:2008)

ISO/PRF TR 17243-3 Machine tool spindles — Evaluation of machine tool spindle

vibrations by measurements on spindle housing — Part 3:
Gear-driven spindles with rolling bearings operating at speeds
between 600 r/min and 12 000 r/min

ISO/FDIS 17543-1.2 Machine tools — Test conditions for universal spindle heads —
Part 1: Accessory heads for machines with horizontal spindle 2020-03-04
(horizontal Z-axis)

ISO/FDIS 19085-13.2 Woodworking machines — Safety — Part 13: Multi-blade rip

sawing machines with manual loading and/or unloading 2020-03-23

TC 43 Acoustics

ISO/FDIS 11691 Acoustics — Measurement of insertion loss of ducted silencers

without flow — Laboratory survey method 2020-03-16

(Revision of ISO 11691:1995)

TC 45 Rubber and rubber products

ISO 36 Rubber, vulcanized or thermoplastic — Determination of

adhesion to textile fabrics

(Revision of ISO 36:2017)

ISO/PRF 3387 Rubber — Determination of crystallization effects by hardness

measurements

(Revision of ISO 3387:2012)

ISO/FDIS 506 Rubber latex, natural, concentrate — Determination of volatile

fatty acid number 2020-03-02

(Revision of ISO 506:1992)

ISO/FDIS 2453 Rubber, raw styrene-butadiene, emulsion-polymerized —

Determination of bound styrene content — Refractive index 2020-03-19
 method
(Revision of ISO 2453:1991, ISO 2453:1991/Cor 1:2003)

ISO/FDIS 17278 Rubber, raw natural — Determination of the gel content of

technically specified rubber (TSR) 2020-03-20

(Revision of ISO 17278:2013)

TC 59 Buildings and civil engineering works

ISO/FDIS 7078 Buildings and civil engineering works — Procedures for setting
out, measurement and surveying — Vocabulary 2020-03-27

(Revision of ISO 7078:1985)

ISO/FDIS 21597-1 Information container for linked document delivery —

Exchange specificaton — Part 1: Container 2020-03-19

TC 60 Gears

ISO/PRF 1328-2 Cylindrical gears — ISO system of flank tolerance classification

— Part 2: Definitions and allowable values of double flank
radial composite deviations
(Revision of ISO 1328-2:1997)

TC 61 Plastics

ISO/FDIS 26723 Plastics — Determination of total luminous transmittance and

reflectance 2020-03-17

ISO/FDIS 20819-1 Plastics — Wood-plastic recycled composites (WPRC) — Part 1:

Specification 2020-03-20

(Revision of ISO 20819:2018)

ISO 22636 Adhesives — Adhesives for floor coverings — Requirements

for mechanical and electrical performance

ISO/FDIS 22403 Plastics — Assessment of the intrinsic biodegradability of

materials exposed to marine inocula under mesophilic aerobic 2020-03-24
laboratory conditions — Test methods and requirements

ISO/FDIS 22526-2 Plastics — Carbon and environmental footprint of biobased

plastics — Part 2: Material carbon footprint, amount (mass) of 2020-02-28
CO2 removed from the air and incorporated into polymer
molecule

TC 67 Materials, equipment and offshore structures for

petroleum, petrochemical and natural gas
industries

ISO/FDIS 29001 Petroleum, petrochemical and natural gas industries —

Sector-specific quality management systems — Requirements 2020-03-25
for product and service supply organizations
(Revision of ISO/TS 29001:2010)

ISO 11961:2018/Amd 1 Petroleum and natural gas industries — Steel drill pipe —
Amendment 1

ISO/FDIS 13680 Petroleum and natural gas industries — Corrosion-resistant

alloy seamless tubular products for use as casing, tubing, 2020-03-23
coupling stock and accessory material — Technical delivery
conditions
(Revision of ISO 13680:2010)
TC 71 Concrete, reinforced concrete and pre-stressed
concrete

ISO/PRF TR 16475 Best practices for the repair of water-leakage cracks in

concrete structures

(Revision of ISO/TR 16475:2011)

TC 76 Transfusion, infusion and injection, and blood

processing equipment for medical and
pharmaceutical use

ISO/FDIS 8871-2 Elastomeric parts for parenterals and for devices for
pharmaceutical use — Part 2: Identification and 2020-03-20
characterization
(Revision of ISO 8871-2:2003, ISO 8871-2:2003/Amd 1:2005)

TC 84 Devices for administration of medicinal products

and catheters

ISO/FDIS 7886-2 Sterile hypodermic syringes for single use — Part 2: Syringes
for use with power-driven syringe pumps 2020-03-26

(Revision of ISO 7886-2:1996)

ISO/FDIS 7886-3 Sterile hypodermic syringes for single use — Part 3: Auto-
disabled syringes for fixed-dose immunization 2020-03-23

(Revision of ISO 7886-3:2005)

TC 92 Fire safety

ISO/PRF TS 5660-5 Reaction-to-fire tests — Heat release, smoke production and

mass loss rate — Part 5: Heat release rate (cone calorimeter
method) and smoke production rate (dynamic measurement)
under reduced oxygen atmospheres

ISO/PRF TR 15655 Fire resistance — Tests for thermo-physical and mechanical

properties of structural materials at elevated temperatures for
fire engineering design
(Revision of ISO/TR 15655:2003)

TC 94 Personal safety -- Personal protective equipment

ISO/PRF TS 16976-5 Respiratory protective devices — Human factors — Part 5:

Thermal effects

(Revision of ISO/TS 16976-5:2013)

TC 96 Cranes

ISO/PRF 9942-3 Cranes — Information labels — Part 3: Tower cranes

(Revision of ISO 9942-3:1999)

TC 98 Bases for design of structures

ISO/PRF 13824 Bases for design of structures — General principles on risk

assessment of systems involving structures

(Revision of ISO 13824:2009)

ISO 10252 Bases for design of structures — Accidental actions

TC 102 Iron ore and direct reduced iron

ISO/PRF TS 21826 Iron ores — Determination of total iron content — EDTA

photometric titration method

TC 106 Dentistry

ISO/PRF TS 17988 Dentistry — Corrosion test methods for dental amalgam

(Revision of ISO/TS 17988:2014)

ISO/PRF 22598 Dentistry — Colour tabs for intraoral tooth colour

determination

ISO/FDIS 21850-1 Dentistry — Materials for dental instruments — Part 1:

Stainless steel 2020-03-25

TC 108 Mechanical vibration, shock and condition

monitoring

ISO/FDIS 19283 Condition monitoring and diagnostics of machines —

Hydroelectric generating units 2020-03-19

TC 110 Industrial trucks

ISO/FDIS 10896-1 Rough-terrain trucks — Safety requirements and verification

— Part 1: Variable-reach trucks 2020-03-17

(Revision of ISO 10896-1:2012)

TC 123 Plain bearings

ISO/FDIS 11687-1 Plain bearings — Pedestal plain bearings — Part 1: Pillow

blocks 2020-03-25

(Revision of ISO 11687-1:1995)

ISO/FDIS 11687-2 Plain bearings — Pedestal plain bearings — Part 2: Side flange
bearings 2020-03-25

(Revision of ISO 11687-2:1995)

ISO/FDIS 11687-3 Plain bearings — Pedestal plain bearings — Part 3: Centre

flange bearings 2020-03-17

(Revision of ISO 11687-3:1995)

ISO/FDIS 12128 Plain bearings — Lubrication holes, grooves and pockets —

Dimensions, types, designation and their application to 2020-03-20
bearing bushes
(Revision of ISO 12128:2001)

ISO/FDIS 3547-5 Plain bearings — Wrapped bushes — Part 5: Checking the

outside diameter 2020-03-25

(Revision of ISO 3547-5:2007)

ISO/FDIS 3547-6 Plain bearings — Wrapped bushes — Part 6: Checking the

inside diameter 2020-03-25

(Revision of ISO 3547-6:2007)

ISO/FDIS 3547-7 Plain bearings — Wrapped bushes — Part 7: Measurement of
wall thickness of thin-walled bushes 2020-03-25

(Revision of ISO 3547-7:2007)

TC 126 Tobacco and tobacco products

ISO/FDIS 23919 Cigarettes — Determination of ammonia in cigarette

mainstream smoke using ion chromatography 2020-03-24

TC 131 Fluid power systems

ISO/FDIS 10770-3 Hydraulic fluid power — Electrically modulated hydraulic

control valves — Part 3: Test methods for pressure control 2020-03-16
valves
(Revision of ISO 10770-3:2007)

TC 134 Fertilizers, soil conditioners and beneficial

substances

ISO/FDIS 20978 Liming material — Determination of neutralizing value —

Titrimetric methods 2020-03-19

ISO/FDIS 22018 Fertilizers, soil conditioners and beneficial substances —

Determination of available phosphorus content in inorganic 2020-03-20
fertilizers — EDTA extraction method

TC 138 Plastics pipes, fittings and valves for the

transport of fluids

ISO/FDIS 12176-5 Plastics pipes and fittings — Equipment for fusion jointing
polyethylene systems — Part 5: Two-dimensional data coding 2020-03-10
of components and data exchange format for PE piping
systems

ISO 13953:2001/FDAmd 1 Polyethylene (PE) pipes and fittings — Determination of the

tensile strength and failure mode of test pieces from a butt- 2020-03-19
fused joint — Amendment 1

ISO 13954:1997/FDAmd 1 Plastics pipes and fittings — Peel decohesion test for
polyethylene (PE) electrofusion assemblies of nominal outside 2020-03-19
diameter greater than or equal to 90 mm — Amendment 1:
Plastics pipes and fittings — Peel decohesion test for
polyethylene (PE) electrofusion assemblies of nominal outside
diameter greater than or equal to 90 mm

ISO 13955:1997/FDAmd 1 Plastics pipes and fittings — Crushing decohesion test for
polyethylene (PE) electrofusion assemblies — Amendment 1: 2020-03-19
Plastics pipes and fittings — Crushing decohesion test for
polyethylene (PE) electrofusion assemblies

ISO/FDIS 8659 Thermoplastics valves — Fatigue strength — Test method

2020-02-28

(Revision of ISO 8659:1989)

TC 150 Implants for surgery

ISO/FDIS 12891-2 Retrieval and analysis of surgical implants — Part 2: Analysis

of retrieved surgical implants 2020-03-16

(Revision of ISO 12891-2:2014)

ISO/FDIS 14708-5 Implants for surgery — Active implantable medical devices —

Part 5: Circulatory support devices 2020-02-28

(Revision of ISO 14708-5:2010)

TC 155 Nickel and nickel alloys

ISO/PRF 7524 Ferronickels — Determination of carbon content — Infrared

absorption method after induction furnace combustion

(Revision of ISO 7524:1985)

ISO/PRF 7526 Ferronickels — Determination of sulfur content — Infrared

absorption method after induction furnace combustion

(Revision of ISO 7526:1985)

TC 156 Corrosion of metals and alloys

ISO/FDIS 11844-2 Corrosion of metals and alloys — Classification of low

corrosivity of indoor atmospheres — Part 2: Determination of 2020-03-25
corrosion attack in indoor atmospheres
(Revision of ISO 11844-2:2005)

ISO/PRF 11845 Corrosion of metals and alloys — General principles for

corrosion testing

(Revision of ISO 11845:1995)

TC 159 Ergonomics

ISO/PRF TR 9241-312 Ergonomics of human-system interaction — Part 312:

Readability of electrophoretic displays

ISO/PRF TR 9241-393 Ergonomics of human-system interaction — Part 393:

Structured literature review of visually induced motion
sickness during watching electronic images

ISO/PRF TS 21054 Ergonomics - Accessible design - Controls of consumer

products

TC 165 Timber structures

ISO/FDIS 19993 Timber structures — Glued laminated timber — Face and edge
joint cleavage test 2020-03-16

(Revision of ISO 19993:2007)

ISO/FDIS 22389-2 Timber structures — Bending applications of I-beams — Part

2: Component performance and manufacturing requirements 2020-03-02

(Revision of ISO 22389-2:2012)

ISO/FDIS 22390 Timber structures — Laminated veneer lumber — Structural

properties 2020-03-02

(Revision of ISO 22390:2010)

TC 168 Prosthetics and orthotics

ISO/PRF 8548-2 Prosthetics and orthotics — Limb deficiencies — Part 2:

Method of describing lower limb amputation stumps

(Revision of ISO 8548-2:1993)

ISO/PRF 8551 Prosthetics and orthotics — Functional deficiencies —

Description of the person to be treated with an orthosis,
clinical objectives of treatment, and functional requirements
of the orthosis
 (Revision of ISO 8551:2003)

TC 172 Optics and photonics

ISO/FDIS 22576 Optics and photonics — Optical materials and components —

Specification of calcium fluoride used in the infrared spectrum 2020-03-26

TC 176 Quality management and quality assurance

ISO/FDIS 10018 Quality management — Guidelines for people engagement

2020-02-28

(Revision of ISO 10018:2012)

TC 181 Safety of toys

ISO/PRF 8124-3 Safety of toys — Part 3: Migration of certain elements

(Revision of ISO 8124-3:2010/Amd 2:2018, ISO 8124-

3:2010/Amd 1:2014, ISO 8124-3:2010)

ISO/PRF TR 8124-9 Safety of toys — Part 9: Safety aspects related to mechanical

and physical properties — Comparison of ISO 8124-1, EN 71-1
and ASTM F963
(Revision of ISO/TR 8124-9:2018)

TC 190 Soil quality

ISO/PRF 22190 Soil quality — Use of extracts for the assessment of

bioavailability of trace elements in soils

TC 194 Biological and clinical evaluation of medical

devices

ISO/PRF TS 10993-19 Biological evaluation of medical devices — Part 19: Physico-

chemical, morphological and topographical characterization of
materials
(Revision of ISO/TS 10993-19:2006)

TC 201 Surface chemical analysis

ISO/TS 15338 Surface chemical analysis — Glow discharge mass

spectrometry — Operating procedures

(Revision of ISO/TS 15338:2009)

TC 204 Intelligent transport systems

ISO/PRF 14907-1 Electronic fee collection — Test procedures for user and fixed
equipment — Part 1: Description of test procedures

(Revision of ISO/TS 14907-1:2015)

ISO/PRF TS 16785 Electronic Fee Collection (EFC) — Application interface

definition between DSRC-OBE and external in-vehicle devices

(Revision of ISO/TS 16785:2014)

ISO/PRF TS 19321 Intelligent transport systems — Cooperative ITS — Dictionary

of in-vehicle information (IVI) data structures

(Revision of ISO/TS 19321:2015)

ISO/FDIS 20901 Intelligent transport systems — Emergency electronic brake

 light systems (EEBL) — Performance requirements and test 2020-03-17
procedures

TC 205 Building environment design

ISO/FDIS 52031 Energy performance of buildings — Method for calculation of

system energy requirements and system efficiencies — Space 2020-03-19
emission systems (heating and cooling)

TC 206 Fine ceramics

ISO/FDIS 18754 Fine ceramics (advanced ceramics, advanced technical

ceramics) — Determination of density and apparent porosity 2020-03-16

(Revision of ISO 18754:2013)

ISO/FDIS 21712 Fine ceramics (advanced ceramics, advanced technical

ceramics) — Test method for flexural bond strength of 2020-02-28
ceramics

TC 207 Environmental management

ISO/PRF 14063 Environmental management — Environmental communication

— Guidelines and examples

(Revision of ISO 14063:2006)

TC 210 Quality management and corresponding general

aspects for medical devices

ISO/PRF TR 20416 Medical devices — Post-market surveillance for manufacturers

TC 215 Health informatics

ISO/IEEE FDIS 11073-10101 Health informatics — Device interoperability — Part 10101:

Point-of-care medical device communication — Nomenclature 2020-05-21

(Revision of ISO/IEEE 11073-10101:2004, ISO/IEEE 11073-

10101:2004/Amd 1:2017)

TC 217 Cosmetics

ISO/FDIS 16217 Cosmetics — Sun protection test methods — Water immersion

procedure for determining water resistance 2020-03-23

TC 224 Service activities relating to drinking water

supply, wastewater and stormwater systems

ISO/FDIS 24527 Service activities relating to drinking water supply,

wastewater and stormwater systems — Guidelines on 2020-03-19
alternative drinking water service provision during a crisis

TC 228 Tourism and related services

ISO/FDIS 22483 Tourism and related services — Hotels — Service

requirements 2020-02-28

TC 229 Nanotechnologies

ISO/PRF TS 19808 Nanotechnologies — Carbon nanotube suspensions —

Specification of characteristics and measurement methods

ISO/PRF TS 21237 Nanotechnologies — Nano-enhanced air filter media using

nanofibres — Characteristics, performance and measurement
methods
TC 238 Solid biofuels

ISO/PRF TS 17225-9 Solid biofuels — Fuel specifications and classes — Part 9:

Graded hog fuel and wood chips for industrial use

TC 256 Pigments, dyestuffs and extenders

ISO/FDIS 787-19 General methods of test for pigments — Part 19:

Determination of water-soluble nitrates (Salicylic acid method) 2020-03-24

(Revision of ISO 787-19:1974)

ISO/FDIS 18314-4 Analytical colorimetry — Part 4: Metamerism index for pairs of

samples for change of illuminant 2020-03-26

TC 261 Additive manufacturing

ISO/ASTM FDIS 52903-1 Additive manufacturing — Material extrusion-based additive

manufacturing of plastic materials — Part 1: Feedstock 2020-03-02
materials

TC 270 Plastics and rubber machines

ISO/FDIS 20430.3 Plastics and rubber machines — Injection moulding machines

— Safety requirements 2020-03-25

TC 281 Fine bubble technology

ISO/PRF TS 21256-1 Fine bubble technology — Cleaning applications — Part 1: Test

method for cleaning salt (NaCl)-stained surfaces

TC 292 Security and resilience

ISO/PRF TR 22370 Security and resilience — Urban resilience — Framework and

principles

IULTCS International Union of Leather Technologists and

Chemists Societies

ISO/FDIS 3376 Leather — Physical and mechanical tests — Determination of

tensile strength and percentage extension 2020-03-16

(Revision of ISO 3376:2011)

CASCO Committee on conformity assessment

ISO/IEC FDIS 17000 Conformity assessment — Vocabulary and general principles

2020-03-27

(Revision of ISO/IEC 17000:2004)

JTC 1 Information technology

ISO/IEC FDIS 30193 Information technology — Digitally recorded media for

information interchange and storage — 120 mm Triple Layer 2020-02-28
(100,0 Gbytes per disk) BD Rewritable disk
(Revision of ISO/IEC 30193:2016)

ISO/IEC 9797-3:2011/Amd 1 Information technology — Security techniques — Message

Authentication Codes (MACs) — Part 3: Mechanisms using a
universal hash-function — Amendment 1

ISO/IEC PRF 20085-2 IT Security techniques — Test tool requirements and test tool
calibration methods for use in testing non-invasive attack
mitigation techniques in cryptographic modules — Part 2: Test
 calibration methods and apparatus

ISO/IEC 27006:2015/FDAmd 1 Information technology — Security techniques —

Requirements for bodies providing audit and certification of 2020-03-07
information security management systems — Amendment 1

ISO/IEC FDIS 27009 Information security, cybersecurity and privacy protection —

Sector-specific application of ISO/IEC 27001 — Requirements 2020-03-26

(Revision of ISO/IEC 27009:2016)

ISO/IEC FDIS 23000-19 Information technology — Multimedia application format

(MPEG-A) — Part 19: Common media application format 2020-02-26
(CMAF) for segmented media
(Revision of ISO/IEC 23000-19:2018, ISO/IEC 23000-
19:2018/Amd 1:2018, ISO/IEC 23000-19:2018/Amd 2:2019)

ISO/IEC FDIS 23001-10 Information technology — MPEG systems technologies — Part

10: Carriage of timed metadata metrics of media in ISO base 2020-03-18
media file format
(Revision of ISO/IEC 23001-10:2015)

ISO/IEC 29170-2:2015/PRF Information technology — Advanced image coding and

Amd 1 evaluation — Part 2: Evaluation procedure for nearly lossless
coding — Amendment 1: Evaluation procedure parameters for
nearly lossless coding of high dynamic range media and
image sequences

ISO/IEC PRF 18046-2 Information technology — Radio frequency identification

device performance test methods — Part 2: Test methods for
interrogator performance
(Revision of ISO/IEC 18046-2:2011)

ISO/IEC PRF TS 20748-3 Information technology for learning, education and training —
Learning analytics interoperability — Part 3: Guidelines for
data interoperability

ISO/IEC PRF TR 22564-1 Information technology — Service management of

infrastructure — Part 1: Process reference model (PRM) for
data centre services

ISO/IEC 30105-3:2016/PRF Information technology — IT Enabled Services-Business

Amd 1 Process Outsourcing (ITES-BPO) lifecycle processes — Part 3:
Measurement framework (MF) and organization maturity
model (OMM) — Amendment 1

Standards published

New International Standards published between 01 January and 01 February 2020

1
delayed publication of language version
2
corrected version
3
multilingual document
 Price
group

PC 303 Guidelines on consumer warranties and guarantees

ISO 22059:2020 en Guidelines on consumer warranties/guarantees

B

PC 320 Tableware, giftware, jewellery and luminaries, made of

glass - Glass clarity - Classification and test method

ISO 24117:2020 en Tableware, giftware, jewellery and luminaries, made of glass — Glass
clarity — Classification and test method B

TC 1 Screw threads

ISO 68-1:1998/Amd 1:2020 en ISO general purpose screw threads — Basic profile — Part 1: Metric
fr screw threads — Amendment 1 XZ

ISO 68-2:1998/Amd 1:2020 en ISO general-purpose screw threads — Basic profile — Part 2: Inch
fr screw threads — Amendment 1: The dimensions of basic profile XZ

ISO 1501:2009/Amd 1:2020 en ISO miniature screw threads — Amendment 1: The figure for the
fr tolerance zone of external thread XZ

ISO 2904:2020 en ISO metric trapezoidal screw threads — Basic dimensions

fr B

TC 4 Rolling bearings

ISO 15241:2012/Amd 1:2020 en Rolling bearings — Symbols for physical quantities — Amendment 1
fr XZ

TC 6 Paper, board and pulps

ISO 21993:2020 en Paper and pulp — Deinkability test for printed paper products
fr D

TC 8 Ships and marine technology

ISO 20661:2020 en Ships and marine technology — Cutter suction dredger supervisory
and control systems B

ISO 20662:2020 en Ships and marine technology — Hopper dredger supervisory and
control systems B

ISO 20663:2020 en Ships and marine technology — Grab dredger supervisory and control
systems A

ISO 23055:2020 en Ships and marine technology — Design requirements for international
ballast water transfer connection flange B

ISO 22252:2020 en Manned submersibles — Breathing air supply and CO2 adsorption
systems — Performance requirements and recommendations B

TC 10 Technical product documentation

ISO 6414:2020 en Technical product documentation (TPD) — Technical drawings for

 fr glassware C

TC 17 Steel

ISO 4987:2020 en Steel castings — Liquid penetrant testing

E

ISO 11971:2020 en Steel and iron castings — Visual testing of surface quality
A

TC 20 Aircraft and space vehicles

ISO 11076:2020 en Aircraft — Deicing/anti-icing methods on the ground

free

ISO 16049-1:2020 en Air cargo equipment — Restraint straps — Part 1: Design criteria and
testing methods D

ISO 16049-2:2020 en Air cargo equipment — Restraint straps — Part 2: Utilization

requirements and recommendations and lashing calculations C

ISO 23103:2020 en Space link extension — Cross support transfer service — Specification
framework H

ISO 23104:2020 en Space link extension — Cross support transfer service — Monitored
data service H

ISO 21980:2020 en Space systems — Evaluation of radiation effects on Commercial-Off-

The-Shelf (COTS) parts for use on low-orbit satellite F

ISO/TR 23989:2020 en Space environment (natural and artificial) — Operational estimation of

the solar wind energy input into the Earth's magnetosphere by means B
of the ground-based magnetic polar cap (PC) index

TC 22 Road vehicles

ISO 6621-5:2020 en Internal combustion engines — Piston rings — Part 5: Quality

requirements C

ISO 12353-1:2020 en,fr Road vehicles — Traffic accident analysis — Part 1: Vocabulary
A

ISO/TR 21959-1:2020 en Road vehicles — Human performance and state in the context of
automated driving — Part 1: Common underlying concepts D

ISO 18868:2013/Amd 1:2020 en Commercial road vehicles — Coupling equipment between vehicles in
multiple vehicle combinations — Strength requirements — XZ
Amendment 1: Clarification for calculation for V-value for
combinations including a centre axel trailer (CAT)

ISO 20766-11:2020 en Road vehicles — Liquefied petroleum gas (LPG) fuel systems
components — Part 11: Manual shut-off valve A

TC 23 Tractors and machinery for agriculture and forestry

ISO 5681:2020 en Equipment for crop protection — Vocabulary

fr A

ISO 12809:2020 en Crop protection equipment — Reciprocating positive displacement

fr pumps and centrifugal pumps — Test method D
TC 24 Particle characterization including sieving

ISO 13320:2020 en Particle size analysis — Laser diffraction methods

G

TC 27 Coal and coke

ISO 349:2020 en Hard coal — Audibert-Arnu dilatometer test

C

TC 28 Petroleum and related products, fuels and lubricants

from natural or synthetic sources

ISO 4259-3:2020 en Petroleum and related products — Precision of measurement methods

and results — Part 3: Monitoring and verification of published C
precision data in relation to methods of test

ISO 13758:1996/Amd 1:2020 en Liquefied petroleum gases — Assessment of the dryness of propane —
Valve freeze method — Amendment 1 XZ

TC 30 Measurement of fluid flow in closed conduits

ISO 17089-1:2019 fr Measurement of fluid flow in closed conduits — Ultrasonic meters for
gas — Part 1: Meters for custody transfer and allocation measurement H

TC 34 Food products

ISO/TS 26030:2019 fr Social responsibility and sustainable development — Guidance on

using ISO 26000:2010 in the food chain F

ISO 11746:2020 en Rice — Determination of biometric characteristics of kernels

fr B

ISO 16297:2020 en Milk — Bacterial count — Protocol for the evaluation of alternative
methods B

ISO 23291:2020 en Milk and milk products — Guidelines for the application of in-line and
on-line infrared spectrometry B

ISO 23349:2020 en Animal and vegetable fats and oils — Determination of sterols and
stanols in foods and dietary supplements containing added E
phytosterols

ISO 11136:2014/Amd 1:2020 en Sensory analysis — Methodology — General guidance for conducting
fr hedonic tests with consumers in a controlled area — Amendment 1 XZ

TC 35 Paints and varnishes

ISO 15184:2020 en Paints and varnishes — Determination of film hardness by pencil test
fr A

ISO 23169:2020 en Paints and varnishes — On-site test methods on quality assessment
for interior wall coatings D

TC 37 Language and terminology

ISO/PAS 24019:2020 en Simultaneous interpreting delivery platforms — Requirements and

recommendations C
TC 38 Textiles

ISO 3071:2020 en Textiles — Determination of pH of aqueous extract

fr A

ISO 20852:2020 en Textiles — Determination of the total heat transfer through textiles in
fr simulated environments A

ISO 2648:2020 en Wool — Determination of fibre length distribution parameters —

fr Capacitance method D

TC 39 Machine tools

ISO 3875:2020 en Machine tools — Test conditions for external cylindrical centreless
fr grinding machines — Testing of the accuracy D

ISO 10791-7:2020 en Test conditions for machining centres — Part 7: Accuracy of finished
fr test pieces F

TC 42 Photography

ISO 18937:2020 en Imaging materials — Photographic reflection prints — Methods for

measuring indoor light stability D

TC 43 Acoustics

ISO 20270:2019 fr Acoustics — Characterization of sources of structure-borne sound and

vibration — Indirect measurement of blocked forces F

TC 45 Rubber and rubber products

ISO 8789:2020 en Rubber hoses and hose assemblies for liquefied petroleum gas in
motor vehicles — Specification B

ISO 2921:2019 fr Rubber, vulcanized — Determination of low-temperature

characteristics — Temperature-retraction procedure (TR test) C

ISO 3865:2020 en Rubber, vulcanized or thermoplastic — Methods of test for staining in

fr contact with organic material B

ISO 7725:2020 en Rubber and rubber products — Determination of chlorine and bromine
content D

ISO 17257:2020 en Rubber — Identification of polymers — Pyrolytic gas-chromatographic

fr method using mass-spectrometric detection C

TC 59 Buildings and civil engineering works

ISO 20887:2020 en Sustainability in buildings and civil engineering works — Design for
fr disassembly and adaptability — Principles, requirements and E
guidance

TC 61 Plastics

ISO 23153-2:2020 en Plastics — Polyetheretherketone (PEEK) moulding and extrusion

fr materials — Part 2: Preparation of test specimens and determination A
of properties

ISO 22526-1:2020 en Plastics — Carbon and environmental footprint of biobased plastics —

Part 1: General principles B
TC 67 Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries

ISO 20088-2:2020 en Determination of the resistance to cryogenic spill of insulation

fr materials — Part 2: Vapour exposure C

TC 71 Concrete, reinforced concrete and pre-stressed

concrete

ISO 1920-4:2020 en Testing of concrete — Part 4: Strength of hardened concrete

E

TC 76 Transfusion, infusion and injection, and blood

processing equipment for medical and pharmaceutical
use

ISO 28620:2020 en Medical devices — Non-electrically driven portable infusion devices

B

TC 83 Sports and other recreational facilities and equipment

ISO 21924-9:2020 en Martial arts — Protective equipment for martial arts — Part 9:
Additional requirements and test methods for Wushu Sanda head C
protectors

TC 85 Nuclear energy, nuclear technologies, and radiological

protection

ISO/TS 23406:2020 en Nuclear sector — Requirements for bodies providing audit and
certification of quality management systems for organizations C
supplying products and services important to nuclear safety (ITNS)

ISO 11665-3:2020 en Measurement of radioactivity in the environment — Air: radon-222 —

Part 3: Spot measurement method of the potential alpha energy D
concentration of its short-lived decay products

ISO 11665-4:2020 en Measurement of radioactivity in the environment — Air: radon-222 —

Part 4: Integrated measurement method for determining average E
activity concentration using passive sampling and delayed analysis

ISO 11665-5:2020 en Measurement of radioactivity in the environment — Air: radon-222 —

Part 5: Continuous measurement methods of the activity C
concentration

ISO 11665-6:2020 en Measurement of radioactivity in the environment — Air: radon-222 —

Part 6: Spot measurement methods of the activity concentration C

ISO 22946:2020 en Nuclear criticality safety — Solid waste excluding irradiated and non-
fr irradiated nuclear fuel B

TC 92 Fire safety

ISO 29903-1:2020 en Comparison of toxic gas data from different tests — Part 1: Guidance
and requirements D

TC 94 Personal safety -- Personal protective equipment

ISO 18526-3:2020 en Eye and face protection — Test methods — Part 3: Physical and
fr mechanical properties G

ISO/TS 16976-7:2020 en Respiratory protective devices — Human factors — Part 7: Hearing

and speech C

TC 104 Freight containers

ISO 668:2020 en Series 1 freight containers — Classification, dimensions and ratings
fr C

TC 106 Dentistry

ISO 9997:2020 en Dentistry — Cartridge syringes

fr B

TC 110 Industrial trucks

ISO 6292:2020 en Powered industrial trucks and tractors — Brake performance and
fr component strength B

ISO 22915-17:2020 en Industrial trucks — Verification of stability — Part 17: Towing tractors,
fr burden and personnel carriers A

ISO 11525-1:2020 en Rough-terrain trucks — Safe use requirements — Part 1: Variable-

reach trucks C

ISO 11525-2:2020 en Rough-terrain trucks — Safe use requirements — Part 2: Slewing

variable-reach trucks C

TC 112 Vacuum technology

ISO 1609:2020 en Vacuum technology — Dimensions of non-knife edge flanges

B

ISO 9803-1:2020 en Vacuum technology — Mounting dimensions of pipeline fittings — Part

1: Non knife-edge flange type A

ISO 9803-2:2020 en Vacuum technology — Mounting dimensions of pipeline fittings — Part

2: Knife-edge flange type A

ISO 21358:2020 en Vacuum technology — Right-angle valve — Dimensions and interfaces

for pneumatic actuator A

TC 121 Anaesthetic and respiratory equipment

ISO 81060-2:2018/Amd en Non-invasive sphygmomanometers — Part 2: Clinical investigation of

1:2020 fr intermittent automated measurement type — Amendment 1 XZ

TC 126 Tobacco and tobacco products

ISO 13276:2020 en Tobacco and tobacco products — Determination of nicotine purity —

Gravimetric method using tungstosilicic acid A

ISO 4874:2020 en Tobacco — Sampling of batches of raw material — General principles

fr B

TC 127 Earth-moving machinery

ISO/TR 6750-2:2020 en Earth-moving machinery — Operator's manual — Part 2: List of

fr references A

ISO/TS 15143-3:2020 en Earth-moving machinery and mobile road construction machinery —

fr Worksite data exchange — Part 3: Telematics data G

TC 130 Graphic technology

ISO/TS 23564:2020 en Image technology colour management — Evaluating colour transform
accuracy in ICC profiles A

TC 131 Fluid power systems

ISO 5598:2020 de,en,fr Fluid power systems and components — Vocabulary

A

ISO 14743:2020 en Pneumatic fluid power — Push-in connectors for thermoplastic tubes
fr E

ISO 18869:2017 fr Hydraulic fluid power — Test methods for couplings actuated with or
without tools F

TC 135 Non-destructive testing

ISO 21432:2019 fr Non-destructive testing — Standard test method for determining

residual stresses by neutron diffraction F

TC 138 Plastics pipes, fittings and valves for the transport of

fluids

ISO 21138-1:2020 en Plastics piping systems for non-pressure underground drainage and
sewerage — Structured-wall piping systems of unplasticized poly(vinyl C
chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1:
Material specification and performance criteria for pipes, fittings and
systems

ISO 21138-2:2020 en Plastics piping systems for non-pressure underground drainage and
sewerage — Structured-wall piping systems of unplasticized poly(vinyl F
chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2:
Pipes and fittings with smooth external surface, Type A

ISO 21138-3:2020 en Plastics piping systems for non-pressure underground drainage and
sewerage — Structured-wall piping systems of unplasticized poly(vinyl F
chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3:
Pipes and fittings with non-smooth external surface, Type B

ISO 21307:2017/Amd 1:2020 en Plastics pipes and fittings — Butt fusion jointing procedures for
polyethylene (PE) piping systems — Amendment 1 XZ

TC 142 Cleaning equipment for air and other gases

ISO 15727:2020 en UV-C devices — Measurement of the output of a UV-C lamp

D

TC 145 Graphical symbols

ISO 7010:2019/Amd 1:2020 en Graphical symbols — Safety colours and safety signs — Registered
safety signs — Amendment 1 XZ

TC 147 Water quality

ISO 22908:2020 en Water quality — Radium 226 and Radium 228 — Test method using
liquid scintillation counting E

TC 150 Implants for surgery

ISO 14243-1:2009/Amd en Implants for surgery — Wear of total knee-joint prostheses — Part 1:
1:2020 Loading and displacement parameters for wear-testing machines with XZ
load control and corresponding environmental conditions for test —
Amendment 1

ISO 14243-3:2014/Amd en Implants for surgery — Wear of total knee-joint prostheses — Part 3:
1:2020 Loading and displacement parameters for wear-testing machines with XZ
displacement control and corresponding environmental conditions for
test — Amendment 1

IEC 60601-2-31:2020 en,fr Medical electrical equipment — Part 2-31: Particular requirements for
the basic safety and essential performance of external cardiac BB
pacemakers with internal power source

TC 153 Valves

ISO 22109:2020 en Industrial valves — Gearbox for valves

fr C

ISO 22153:2020 en Electric actuators for industrial valves — General requirements

D

TC 156 Corrosion of metals and alloys

ISO 11844-3:2020 en Corrosion of metals and alloys — Classification of low corrosivity of

fr indoor atmospheres — Part 3: Measurement of environmental B
parameters affecting indoor corrosivity

TC 164 Mechanical testing of metals

ISO 10113:2020 en Metallic materials — Sheet and strip — Determination of plastic strain
fr ratio D

TC 172 Optics and photonics

ISO 9336-3:2020 en Optics and photonics — Optical transfer function — Application — Part
3: Telescopes C

ISO 11551:2019 en Optics and photonics — Lasers and laser-related equipment — Test
fr method for absorptance of optical laser components C

TC 173 Assistive products

ISO 21801-1:2020 en Cognitive accessibility — Part 1: General guidelines

D

TC 174 Jewellery and precious metals

ISO 22764:2020 en Jewellery and precious metals — Fineness of solders used with
precious metal jewellery alloys A

TC 182 Geotechnics

ISO 18674-3:2017/Amd en Geotechnical investigation and testing — Geotechnical monitoring by

1:2020 field instrumentation — Part 3: Measurement of displacements across XZ
a line: Inclinometers — Amendment 1

TC 194 Biological and clinical evaluation of medical devices

ISO 10993-18:2020 en Biological evaluation of medical devices — Part 18: Chemical

fr characterization of medical device materials within a risk G
management process

TC 195 Building construction machinery and equipment

ISO 19432-1:2020 en Building construction machinery and equipment — Portable, hand-

fr held, internal combustion engine-driven abrasive cutting machines — G
Part 1: Safety requirements for cut-off machines for centre-mounted
rotating abrasive wheels

TC 201 Surface chemical analysis

ISO 21222:2020 en Surface chemical analysis — Scanning probe microscopy — Procedure
for the determination of elastic moduli for compliant materials using C
atomic force microscope and the two-point JKR method

TC 204 Intelligent transport systems

ISO 14813-5:2020 en Intelligent transport systems — Reference model architecture(s) for

the ITS sector — Part 5: Requirements for architecture description in D
ITS standards

ISO/TS 19082:2020 en Intelligent transport systems — Definition of data elements and data
frames between roadside modules and signal controllers for D
cooperative signal control

ISO 19414:2020 en Intelligent transport systems — Service architecture of probe vehicle

systems B

TC 206 Fine ceramics

ISO 22551:2020 en Fine ceramics (advanced ceramics, advanced technical ceramics) —

Determination of bacterial reduction rate by semiconducting B
photocatalytic materials under indoor lighting environment — Semi-
dry method for estimating antibacterial activity on the actual
environmental bacteria contamination surface

ISO 23114:2020 en Fine ceramics (advanced ceramics, advanced technical ceramics) —

Test method for determining bonding strength of ceramic coatings C

TC 207 Environmental management

ISO 14006:2020 en Environmental management systems — Guidelines for incorporating

fr ecodesign E

TC 211 Geographic information/Geomatics

ISO 19136-1:2020 en Geographic information — Geography Markup Language (GML) — Part

1: Fundamentals H

ISO 19161-1:2020 en Geographic information — Geodetic references — Part 1: International

terrestrial reference system (ITRS) C

TC 215 Health informatics

ISO/TS 21831:2020 en Information model of Chinese materia medica processing

B

ISO/TS 23303:2020 en Health informatics — Categorial structure for Chinese materia medica
products manufacturing process B

TC 217 Cosmetics

ISO/TS 22176:2020 en Cosmetics — Analytical methods — Development of a global approach

for validation of quantitative analytical methods F

TC 218 Timber

ISO 13061-5:2020 en Physical and mechanical properties of wood — Test methods for small
clear wood specimens — Part 5: Determination of strength in A
compression perpendicular to grain

TC 238 Solid biofuels

ISO 21404:2020 en Solid biofuels — Determination of ash melting behaviour

fr C
TC 249 Traditional Chinese medicine

ISO 18615:2020 en Traditional Chinese medicine — General requirements of electric

radial pulse tonometric devices C

ISO 22988:2020 en Traditional Chinese medicine — Astragalus mongholicus root

D

TC 261 Additive manufacturing

ISO/ASTM 52904:2019 fr Additive manufacturing — Process characteristics and performance —

Practice for metal powder bed fusion process to meet critical B
applications

TC 268 Sustainable cities and communities

ISO 37155-1:2020 en Framework for integration and operation of smart community

infrastructures — Part 1: Recommendations for considering D
opportunities and challenges from interactions in smart community
infrastructures from relevant aspects through the life cycle

TC 281 Fine bubble technology

ISO 21256-2:2020 en Fine bubble technology — Cleaning applications — Part 2: Test

method for cleaning machine-oil stained surfaces of machined metal C
parts

ISO 21910-1:2020 en Fine bubble technology — Characterization of microbubbles — Part 1:

Off-line evaluation of size index D

TC 282 Water reuse

ISO 22449-1:2020 en Use of reclaimed water in industrial cooling systems — Part 1:

Technical guidelines C

IULTCS International Union of Leather Technologists and

Chemists Societies

ISO 17076-1:2020 en Leather — Determination of abrasion resistance — Part 1: Taber®

fr method A

JTC 1 Information technology

ISO/IEC 14165-226:2020 en Information technology — Fibre channel — Part 226: Single-byte

command code sets mapping protocol - 6 (FC-SB-6) H

ISO/IEC 14165-246:2019 en Information technology — Fibre channel — Part 246: Backbone — 6

(FC-BB-6) H

ISO/IEC 21972:2020 en Information technology — Upper level ontology for smart city
indicators E

ISO/IEC 19770-8:2020 en Information technology — IT asset management — Part 8: Guidelines

for mapping of industry practices to/from the ISO/IEC 19770 family of C
standards

ISO/IEC 27007:2020 en Information security, cybersecurity and privacy protection —

Guidelines for information security management systems auditing F

ISO/IEC 27050-3:2020 en Information technology — Electronic discovery — Part 3: Code of

practice for electronic discovery E

ISO/IEC 13818-1:2019/Amd en Information technology — Generic coding of moving pictures and

1:2020 associated audio information — Part 1: Systems — Amendment 1: XZ
Carriage of JPEG XS in MPEG-2 TS

ISO/IEC 14496-14:2020 en Information technology — Coding of audio-visual objects — Part 14:

MP4 file format C

ISO/IEC 23003-5:2020 en Information technology — MPEG audio technologies — Part 5:

Uncompressed audio in MPEG-4 file format A

ISO/IEC 19823-10:2020 en Information technology — Conformance test methods for security

service crypto suites — Part 10: Crypto suite AES-128 F

ISO/IEC 11179-3:2013/Amd en Information technology — Metadata registries (MDR) — Part 3:

1:2020 Registry metamodel and basic attributes — Amendment 1 XZ

ISO/IEC TS 22424-1:2020 en Digital publishing — EPUB3 preservation — Part 1: Principles

D

ISO/IEC TS 22424-2:2020 en Digital publishing — EPUB3 preservation — Part 2: Metadata

requirements E

Standards confirmed

The following International Standards are confimred for a five year period:

TC 4 Rolling bearings

ISO 3290-1:2014

ISO 3290-2:2014

TC 8 Ships and marine technology

ISO 5778:1998 (reconfirmed)

TC 20 Aircraft and space vehicles

ISO 15859-1:2004 (reconfirmed)

ISO 15859-2:2004 (reconfirmed)

ISO 15859-3:2004 (reconfirmed)

ISO 15859-4:2004 (reconfirmed)

ISO 15859-5:2004 (reconfirmed)

ISO 15859-6:2004 (reconfirmed)

ISO 15859-7:2004 (reconfirmed)

ISO 15859-8:2004 (reconfirmed)

ISO 15859-9:2004 (reconfirmed)

ISO 15859-10:2004 (reconfirmed)

ISO 15859-11:2004 (reconfirmed)

ISO 15859-12:2004 (reconfirmed)

ISO 15859-13:2004 (reconfirmed)

ISO 17255:2014

ISO 21351:2005 (reconfirmed)

ISO 23462:2014

TC 23 Tractors and machinery for agriculture and forestry

ISO 3776-1:2006 (reconfirmed)

ISO/TS 28923:2012 (reconfirmed)

TC 24 Particle characterization including sieving

ISO 15901-3:2007 (reconfirmed)

TC 28 Petroleum and related products, fuels and lubricants from natural or

synthetic sources

ISO 2049:1996 (reconfirmed)

ISO 3105:1994 (reconfirmed)

ISO 3830:1993 (reconfirmed)

ISO 4263-1:2003 (reconfirmed)

ISO 5661:1983 (reconfirmed)

ISO 6244:1982 (reconfirmed)

ISO 6293-2:1998 (reconfirmed)

ISO 3170:2004 (reconfirmed)

TC 29 Small tools

ISO 242:2014

ISO 243:2014

ISO 514:2014

ISO 26623-2:2014

TC 33 Refractories

ISO 528:1983 (reconfirmed)

ISO 5018:1983 (reconfirmed)

ISO 5019-1:1984 (reconfirmed)

ISO 5019-2:1984 (reconfirmed)

ISO 5019-3:1984 (reconfirmed)

ISO 5019-5:1984 (reconfirmed)

TC 38 Textiles

ISO 16533:2014

ISO 7768:2009 (reconfirmed)

ISO 7769:2009 (reconfirmed)

ISO 7770:2009 (reconfirmed)

TC 44 Welding and allied processes

ISO 8207:1996 (reconfirmed)

TC 45 Rubber and rubber products

ISO 18752:2014 (reconfirmed)

TC 46 Information and documentation

ISO 6630:1986 (reconfirmed)

ISO 8459:2009 (reconfirmed)

ISO 20775:2009 (reconfirmed)

ISO 23950:1998 (reconfirmed)

ISO 28560-1:2014

ISO 28560-3:2014

TC 58 Gas cylinders

ISO 10297:2014

ISO 14246:2014

TC 61 Plastics

ISO 1628-2:1998 (reconfirmed)

TC 104 Freight containers

ISO 9669:1990 (reconfirmed)

ISO 9897:1997

TC 108 Mechanical vibration, shock and condition monitoring

ISO 10816-7:2009 (reconfirmed)

ISO 14837-1:2005 (reconfirmed)

ISO 14963:2003 (reconfirmed)

TC 111 Round steel link chains, chain slings, components and accessories

ISO 8539:2009 (reconfirmed)

TC 113 Hydrometry

ISO 4369:1979 (reconfirmed)

ISO 18365:2013

ISO 1088:2007 (reconfirmed)

ISO 11657:2014

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO 10931:2005 (reconfirmed)

ISO 15493:2003 (reconfirmed)

TC 147 Water quality

ISO 5667-6:2014

ISO 5667-11:2009 (reconfirmed)

TC 159 Ergonomics

ISO 9241-13:1998 (reconfirmed)

ISO 9241-410:2008 (reconfirmed)

ISO 24503:2011 (reconfirmed)

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO 11441:1995 (reconfirmed)

ISO 12740:1998 (reconfirmed)

ISO 12745:2008 (reconfirmed)

ISO 13545:2000 (reconfirmed)

TC 188 Small craft

ISO 6185-3:2014

TC 190 Soil quality

ISO 17184:2014

ISO/TS 10832:2009 (reconfirmed)

ISO 14240-1:1997 (reconfirmed)

ISO 14240-2:1997 (reconfirmed)

ISO 15473:2002 (reconfirmed)

ISO 20963:2005 (reconfirmed)

TC 193 Natural gas

ISO 13443:1996 (reconfirmed)

ISO 13686:2013

ISO 14532:2014

ISO 15971:2008 (reconfirmed)

TC 201 Surface chemical analysis

ISO 17560:2014

ISO 23812:2009 (reconfirmed)

TC 204 Intelligent transport systems

ISO/TR 12859:2009

ISO/TR 24098:2007

TC 205 Building environment design

ISO 16818:2008 (reconfirmed)

TC 210 Quality management and corresponding general aspects for medical

devices

ISO 13485:2016

TC 211 Geographic information/Geomatics

ISO/TS 19159-2:2016

TC 217 Cosmetics

ISO 17516:2014

TC 219 Floor coverings

ISO 11377:1997 (reconfirmed)

TC 226 Materials for the production of primary aluminium

ISO 902:1976 (reconfirmed)

ISO 3393:1976 (reconfirmed)

ISO 5939:1980 (reconfirmed)

ISO 6375:1980 (reconfirmed)

ISO 6376:1980 (reconfirmed)

ISO 6791:1981 (reconfirmed)

ISO 6997:1985 (reconfirmed)

ISO 6998:1997 (reconfirmed)

ISO 8004:1985 (reconfirmed)

ISO 8005:2005 (reconfirmed)

ISO 8006:1985 (reconfirmed)

ISO 8723:1986 (reconfirmed)

ISO 9088:1997 (reconfirmed)

ISO 10237:1997 (reconfirmed)

ISO 11412:1998 (reconfirmed)

ISO 12986-1:2014

ISO 12986-2:2014

ISO 14435:2005 (reconfirmed)

ISO 18515:2014

TC 229 Nanotechnologies

ISO/TS 19006:2016

JTC 1 Information technology

ISO/IEC 29341-4-3:2008 (reconfirmed)

ISO/IEC 29341-5-1:2008 (reconfirmed)

ISO/IEC 29341-5-10:2008 (reconfirmed)

ISO/IEC 29341-5-11:2008 (reconfirmed)

ISO/IEC 29341-5-12:2008 (reconfirmed)

ISO/IEC 29341-6-1:2008 (reconfirmed)

ISO/IEC 29341-6-2:2008 (reconfirmed)

ISO/IEC 29341-6-11:2008 (reconfirmed)

ISO/IEC 29341-6-12:2008 (reconfirmed)

ISO/IEC 29341-6-13:2008 (reconfirmed)

ISO/IEC 29341-6-14:2008 (reconfirmed)

ISO/IEC 29341-6-15:2008 (reconfirmed)

ISO/IEC 29341-6-16:2008 (reconfirmed)

ISO/IEC 29341-6-17:2008 (reconfirmed)

ISO/IEC 29341-7-10:2008 (reconfirmed)

ISO/IEC 29341-8-1:2008 (reconfirmed)

ISO/IEC 29341-8-2:2008 (reconfirmed)

ISO/IEC 29341-8-3:2008 (reconfirmed)

ISO/IEC 29341-8-4:2008 (reconfirmed)

ISO/IEC 29341-8-5:2008 (reconfirmed)

ISO/IEC 29341-8-10:2008 (reconfirmed)

ISO/IEC 29341-8-11:2008 (reconfirmed)

ISO/IEC 29341-8-12:2008 (reconfirmed)

ISO/IEC 29341-8-13:2008 (reconfirmed)

ISO/IEC 29341-8-14:2008 (reconfirmed)

ISO/IEC 29341-8-15:2008 (reconfirmed)

ISO/IEC 29341-8-16:2008 (reconfirmed)

ISO/IEC 29341-8-17:2008 (reconfirmed)

ISO/IEC 29341-8-18:2008 (reconfirmed)

ISO/IEC 29341-8-19:2008 (reconfirmed)

ISO/IEC 29341-8-20:2008 (reconfirmed)

ISO/IEC 29341-8-21:2008 (reconfirmed)

ISO/IEC 29341-9-1:2008 (reconfirmed)

ISO/IEC 29341-9-2:2008 (reconfirmed)

ISO/IEC 29341-9-10:2008 (reconfirmed)

ISO/IEC 29341-9-11:2008 (reconfirmed)

ISO/IEC 29341-9-12:2008 (reconfirmed)

ISO/IEC 29341-9-13:2008 (reconfirmed)

ISO/IEC 29341-10-1:2008 (reconfirmed)

ISO/IEC 29341-10-10:2008 (reconfirmed)

ISO/IEC 29341-10-11:2008 (reconfirmed)

ISO/IEC 29341-10-12:2008 (reconfirmed)

ISO/IEC 29341-11-1:2008 (reconfirmed)

ISO/IEC 29341-11-2:2008 (reconfirmed)

ISO/IEC 29341-11-10:2008 (reconfirmed)

ISO/IEC 29341-11-11:2008 (reconfirmed)

ISO/IEC 29341-11-12:2008 (reconfirmed)

ISO/IEC 29341-13-10:2008 (reconfirmed)

ISO/IEC 29341-13-11:2008 (reconfirmed)

ISO/IEC 11404:2007

ISO/IEC 13250-4:2009 (reconfirmed)

ISO/IEC TR 19795-3:2007

ISO/IEC 19795-4:2008 (reconfirmed)

ISO/IEC 24713-1:2008 (reconfirmed)

ISO/IEC 24713-2:2008 (reconfirmed)

ISO/IEC TR 29144:2014

ISO/IEC TR 29198:2013
Standards withdrawn

Period from 01 January to 01 February 2020

TC 17 Steel

ISO 13898-1:1997 (replaced by )

ISO 13898-2:1997 (replaced by )

ISO 13898-3:1997 (replaced by )

ISO 13898-4:1997 (replaced by )

TC 92 Fire safety

ISO 29903:2012 (replaced by ISO 29903-1:2020)

TC 94 Personal safety -- Personal protective equipment

ISO 4855:1981 (replaced by ISO 18526-3:2020)

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO 7684:1997 (replaced by )

TC 193 Natural gas

ISO 6326-1:2007 (replaced by )

ISO 6326-3:1989 (replaced by )

ISO 6326-5:1989 (replaced by )

TC 195 Building construction machinery and equipment

ISO 19432:2012 (replaced by ISO 19432-1:2020)

TC 211 Geographic information/Geomatics

ISO 19136:2007 (replaced by ISO 19136-1:2020)

TC 218 Timber

ISO 3132:1975 (replaced by ISO 13061-5:2020)

Meeting calendar
The meeting calendar is available at

https://www.iso.org/meeting-calendar.html