Scribd
Upload
13 views

Appendix Software License Management

SOFTWARE ZVIEW

Uploaded by

vanegas.asociados87
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views

Appendix Software License Management

SOFTWARE ZVIEW

Uploaded by

vanegas.asociados87
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Appendix – Software License Management

Note

The software license management Needs the USB dongle Key. USB dongle key used
to activate software license can be only used activating the software license after
the activation. After activation software license in the PC, the used USB dongle key
run only the activated S/W license. in the PC. And after activated, the activated
software license of dongle key use for only activation license. in the PC. USB Dongle
Key does not require to run digital console software. And you cannot return to
normal state of USB dongle key for running in several PC.

Please careful.

1. Activation of Software License

1.1. Software license management software

(1) Run SoftwareKeyManager.exe

(2) If the USB dongle Key is not installed in the PC, Key Lock value shows “No
hardware key” as hardware information.

| 2 |
(3) If the USB dongle key is installed in the PC or Push Check, click “Check Key” while
USB dongle key is installed in the PC. Then, Keylock value will be shown the
Serial Number of USB dongle Key.

(4) The state value is shown of “Normal hardware Key” before activating software
license.

| 3 |
(5) Click “Change” button.

Click “Yes” to accept and complete the software license.

| 4 |
(6) Software Information will state ‘Software key is Activated!’ as below picture when
activation is successfully done.

If success activated software license, state value is shown as below :

- State of Hardware Information: “Software key entered”


- State of Software Information: “Software Key is Activated!”

Once software license is activated, both Software License and USB Dongle Key
can be used at the PC that has completed the software license only

Reactivating is available only at the same PC that has done at the first time.

| 5 |
When “Change” button is clicked while different USB Dongle Key is installed at
the PC, check message will show up as below.

If click “Yes”, new software license and USB Dongle Key will be activated in this
PC.
And this will mean that one PC will have two activated software license and
USB Dongle Key.

Once one USB Dongle Key is activated at one PC, same USB Dongle Key cannot
be used no other PC than activated PC.

| 6 |

You might also like