Scribd
Upload
24 views1 page

260B TRPlast 1

Uploaded by

amiromara15
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views1 page

260B TRPlast 1

Uploaded by

amiromara15
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TRP COMPOUND REFERENCE No:

TRPlast® 260B Universal Black

Polymer Type: Perfluoroelastomer (FFKM)

This black FFKM material is designed for sealing


applications requiring best in class chemical
resistance. It has excellent compression set
properties and this grade is particularly suitable Along with all our TRPlast® range, this grade is
for prolonged use with strong acids. suitable for use in a wide range of applications
Service Temperature: +260°C (+446°F) to –23°C where other polymers are not suitable. Do not
(-9°F). use any TRPlast® grade with molten alkali
metals.
Property Typical Values Test Standard
Colour Black
Hardness (IRHD) 77 ISO 48
TYPICAL PHYSICAL

Tensile Strength (MPa) 23.3 ISO 37


PROPERTIES

Modulus @ 100% (MPa) 16.4 ISO 37


Elongation @ Break (%) 153 ISO 37
Tear Strength (N/mm) 25.2 ISO 34
TR10 (oC) -8 ISO 2921
Specific Gravity (g/cm³) 1.98 ISO 2781
Compression Set Value in Air,
10.3 ISO 815
25% Strain, 24 HRS @ 204°C (%)

Chemical Group Rating Chemical Group Rating


Aromatics/Aliphatic oils 1 Ethylene 1
Acids 1 Esters 1
Alkalis 1 Ketones 1
RESISTANCE

Alcohols 1 Propylene Oxide 1


CHEMICAL

Aldehydes 1 Steam/Hot Water 1


Amines 1 Strong Oxidisers 1
o
Ethers 1 Amines >70 C 2
1 Suitable, little or no effect.
2 Minor to moderate effect, not maximum resistance.
3 Moderate to severe effect - may be useful in some limited applications.
4 Unsuitable and not recommended - severe effect
More detailed information available on request

The service limit provided on this datasheet is stated as 15oC below the TR10 value. It is generally accepted within the industry that an elastomer will seal to 15 oC below the TR10 figure in static
conditions, providing that compression of the seal takes place at ambient conditions. TRP Polymer Solutions Ltd. Recommends that seals are evaluated in service before specification.

MD334 1 OF 1 13.07.21 3 CC

You might also like