Percentage BoQ

Validate Print Help

Tender Inviting Authority: Chief General Manager (Civil), IDCO.

Name of Work: CENTER OF EXCELLENCE AT GOVT. COLLEGE OF ENGINEERING, KEONJHAR

(The bidders are required to Quote their rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed)

BID ID No: Civil/EST/E-32/2022-23

Name of
the
Bidder/
Bidding
Firm /
Compan
y:
PRICE SCHEDULE
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
1
CIVIL WORK.
2
CIVIL & STRUCTURE
3 Supplying, fitting and fixing full body glazed vitrified tile (Matt finish) flooring
using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of
600mmx600mm of approved quality of Somany/ Kajaria/RAK, colour in floors,
treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid
in proper slope and gradient with screened and washed sharp sand for mortar and
fixing with neat white cement slurry, grouting the joints with neat white cement
slurry mixed with required quantities of pigments of approved make to match the
shades of the vitrified tile if required , watering and curing for 21 days, including
cost, conveyance, loading, unloading, royalties of all materials, cost of all labour,
Labour cess , sundries, T&P required for the work, complete in all respect as per
specification excluding GST and direction of Engineer-in-charge. (Note- Sample
of tiles shall be approved before procurement and use, Rate of tile not less
than Rs.800.00/Sqm only rate of tile excluding GST)

3.01 FIRST FLOOR 68.49 SQM 1202.90 82386.62

4 Finishing wall surface of walls with wall putty (water based) of approved make
and finishing the surface smooth by sand papering to receive paint in all floor & at
all heights including cost, conveyance, loading, unloading, stacking of all materials,
cost of all labour, sundries, staging, scaffolding, T&P required for the work etc.
complete in all respect excluding GST as directed by the Engineer-in-charge.

4.01 FIRST FLOOR 602.27 SQM 59.19 35648.36

5 Providing Wall painting with distemper paint two and more coats in all floor and
at all heights including cost, conveyance, loading, unloading, cost of all labour,
sundries, staging, scaffolding, T&P required for the work etc. complete in all respect
excluding GST as directed by the Engineer-in-charge.
5.01 FIRST FLOOR 602.27 SQM 66.92 40303.91

6 Providing wall painting with primer (oil bound) one coat to the internal wall
surface including cost of all materials, labour, tools & plant, brushes etc. complete in
all respects excluding GST as per the direction of Engineer in charge.

6.01 FIRST FLOOR 602.27 SQM 59.45 35804.95

7 Interior work
8 Supply and installation of Anutone Astral Serge Lance, Metal grille ceilings of size 55.00 sqm 4342.00 238810.00
25x100x3000x0.5mm thick, cell size 100/150/200mm c/c,square edge, made up of
Galvanised Mild steel, installed using Anutone Strut ceiling system.Anutone Strut
ceiling system includes Anutone Strut Carrier, having 8mm circular perforations at
50mm pitch,sectional thickness 1.2mm, length 3600mm, equal flanges of 21mm,
hung from the soffit at 1200mm centers with Hanger rod and soffit cleat (Hangerrod
and soffit cleat not by Anutone).C Hanger is fastened to Strut Carrier above at
every 100/150/200mm.C Hanger is used as Connector Clip to Connect Strut Carrier
and Serge Lance.Serge Lance is fastened to C Hanger at interval of
100|150|200mm or as per architectural drawing• Fire (Class) – A
• Acoustics – na
• Climate (°C, RH) – 50, 90
• Light reflectance (%) – na
• Green (VOC, RC %) – Low, 25.The cost includes
materials,labour,tools,conveyance,loading,unloading etc complete in all respect
excluding GST as per the direction of Engineer in charge.

Page 1
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
9 Supply and Installation of Anutone 8 mm thick magnesium oxide square edge 5.32 sqm 1360.00 7235.20
magnesia core ceiling tile of size 595 x 595 mm having density 1000 Kgs/ m3,
weight 8 kg/m2 which is suspended by using 0.3 mm thick and 24 mm wide
precoated metalAnutone T 24 grid system. The technical parameters are as follows
:Core - Magnesia, Fire – Class 1 & P, Acoustics – STC 44 - 54 , climate - 50 , RH -
95, Termite resistance ,Green (RC %) – 30, Hygiene (VoC, Clean room) – Low,
Class 3 , Thermal -0.12 W/mK. The T 24 Grid system of 600 x 600 mm module
shall include wall angle (WA 24 W 30) with unequal flanges of size 14 & 20 mm
wide, length 3000 mm, 0.43 mm thick fixed along the perimeter of wall with the help
of nylon sleeves and suitable fasteners at 300 mm centers. Then suspend the Main
T 24(MT 24 W 36) having flange width 24 mm, height 32 mm and length 3600 mm
from the soffit with help of soffit cleat and wire rod along with leveling spring clip at
1200 mm c/c. Cross 24(CT 24 W 12) with flange width 24 mm, height 32 mm and
length 1200 mm is then interlocked into the precut slots in the Main T 24 at 600 mm
centers in the direction perpendicular to the Main Anutone T 24. Finally Cross T 24
(CT 24 W 06) having flange width 24 mm, height 32 mm and length 600 mm are
then interlocked into the precut slots in the 1200 mm Cross T 24 at 1200 mm
centers and in direction parallel to the Main T 24. Anuton Magnesium oxide vinyl
square edge of size 595 x 595 x 8 mm thick shall be placed into the grid size of 600
x 600 mm. Test certificate will be submitted after procurement of materials. as
directed by the Engineer-in-charge. The cost includes
materials,labour,tools,conveyance,loading,unloading etc complete in all respect
excluding GST as per the direction of Engineer in charge.

10 Providing and fixing gypboard suspended false ceiling (single layers) in different 149.53 sqm 826.00 123511.78
levels, recesses, flat areas as per design with G.I. Framework using Gypsteel of
perimeter channels, intermediate channels and ceiling sections) and 12.5 mm taped
edge gypboard screw fixed to ceiling section as per design , complete with fixing
and finishing of tapered and square edges of board with jointing compound paper
tape and 2 coats suitable primer including all cost of materials , labour, overheads
T & P etc., complete.and painting the entire ceiling area with plastic emulsion
paint ( 2 & more coats of approved shade) to get an even shade as per the detail
design and specification. measurement will be taken flat area of the ceiling for
payment.no additional payment made for the different level/ drop etc. complete in all
respects excluding GST as per the direction of Engineer in charge.

11 Supply and Installation of 70 mm thick Anutone magnesium oxide board 46.67 sqm 3492.00 162971.64
drywall partition system having (high water & fire resistance) which includes two
layers of tufbloc HDFR magnesia square board having square edge & size 2400 X
1200 x 10 mm to be fixed on the either side of the GI stud channel framework in
horizontal position of length side board. Now the frame work includes Floor / Head (
FC 50 ) Anuton channels having thickness 0.06 mm length 3600 mm ,equal flanges
of 32 mm & web of 50 mm fixed to floor & ceiling with suitable fasteners at 300 mm
centers staggered noise & fire rated silicon sealant to caulked along the perimeter
of the partition frame before fixing channels.Then stud channels SC 48 having
thickness 0.75 length 3600 mm , un equal flanges of 36 mm & web of 48 mm
should be placed into the floor / head channels positioned vertically at 600 mm
centers. Horizontal intermediate channel at 1200 mm centers to locked with the
vertical studs. Extra reinforcement to be provided at openings ( doors & Window ).
Apply Anutone Synthetic poly fiber 5 x is 50 mm width,600/1200 mm density 1000
gsm filled between the studs & held in position by using chicken mesh wire / pasting
on the board. Now, boarding is to done on each side of studs framework in a
staggered pattern by the help of self drilling screw at 300 mm centers. After
boarding of two boards jointing & finishing is to be done by joint compound . The
flush look will appear after sanding the two boards joint properly to get a smooth
look . The technical parameters of the boards - Density- 1000 kg / mt cube weight
10 kg/ mt sq , Fire -150 min acoustic STC - 50 db, climate OCRH - 50 ,99 Termite
resistance - yes, Moister absorbent - 6.8% after 2 hr, wet expansion less than -
0.02% from ambient to saturation ,Moister Movement - 0.02% Green - RC % - 30
Strength - Anti sag. Test reports of manufactures are to submitted at the time of
delivering of materials. as directed by the Engineer-in-charge. The cost includes
materials,labour,tools,conveyance,loading,unloading complete in all respects
excluding GST as per the direction of Engineer in charge.

Page 2
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
12 Supply & installation of wall paneling of Anutone slats surco high density 94.13 sqm 6107.00 574851.91
fiberboard made out of pure pinewood particles , Fire Resistance - core with 5
test Fire Resistance BS 476 part 5 , BS 476 part 6 , BS 476 part 7 ISO 1182 ASTM
E662 Smoke Density - Melamine laminated finish, perforated wooden grooved HDF
slats L16-2 (2 mm grooves @ 8 mm centers),tongue-groove edge for a seamless
look of lineal dimension size 128 mm x 2440 mm x 16 mm thick having density 700
Kg /m3, weight -9 Kgs/m2 with back fleecs from soundtex Germany nonwoven
acoustic to be pasted on slats surco is to be installed by using GI strut system. The
technical parameters are as follows Core Variants - Fiberboard, Climate (OC RH) –
50, 70 Light reflectance – 75%,Green (RC %) – 25, Hygiene (VoC, Clean room) –
Low, Class 1,Strength, Load capacity (Kg) - Anti sag, Ball-Impact. The concealed
wall paneling system shall include GI Wall channel (WC25) having thickness
0.45mm, length 3600mm, unequal flanges of 15 & 20mm and web of 25mm should
be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners
at every 300mm centers. Then fixed Main channels (MC45) having thickness
0.9mm, length 3600mm, equal flanges of 15mm and web 45mm from the side wall
& fixed at every 1200mm centers with GI cross channel(CC25) having thickness
0.45mm, length 3600mm, knurled web 35mm, depth of 25mm and equal flanges
9.5mm is fastened to the Main channel in the direction perpendicular to the Main
Channel at every 600mm centers. The framework will maintain 50 / 75 mm gap from
the walls. Now clad the wooden slats surco on the CC 18 with the help of center &
edge clips to get better locking of slats. The tongue & groove are to be properly
aligned to get flush look . Synth poly fiber PF 5 x 50 wool of 500 gsm to be filled
between the horizontal & vertical studs as in filler with the help of wire / stick 7
adhesive. Test certificate of the use products shall be submitted after procurement
of materials. as directed by the Engineer-in-charge.

13 Supplying & fixing of 9 mm thick HPL interior cladding of approved make , after 6.30 sqm 7639.60 48129.48
sloting in all sides as per dimensions required at site , using beta Aluminium
profiles of diffrent type as per applicabilities and as per manufacturer specifications
. The makes shall be approved by Engineer-in-charge before execution. The cost
includes materials,labour,tools,conveyance,loading,unloading et.c complete in all
respects excluding GST as per the direction of Engineer in charge.

14 Providing Supplying and fixing of 12 mm thick frameless toughened glass door 24.89 sqm 10740.00 267318.60
shutter of approved brand and manufacture, edges with Crystal/pencil polished
around including patch fittings of approved make of top patch & bottom top pivot,
corner patch lock. 'H' type handle 20 mm x 600 mm & heavy-duty floor springs and
making necessary holes cutout etc. all complete as per drawing and as per
direction of Engineer.
(Hardware make: - Ozone/ Godrej /Dorma. Glass make SAINT GOBAIN as per the
design. . The makes shall be approved by Engineer-in-charge before execution.The
cost includes all the necessary material, required hardware, labor, conveyance etc.
complete in all respects excluding GST as per the direction of Engineer in charge.

15 Providing and fixing removable raised/false access flooring with system and
its components of approved make for different plenum height with possible height
adjustment upto 50 mm, comprising of modular load bearing floor panels supported
on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per
the architectural drawings, as specified and as directed by Engineer-in-charge
consisting of:(a) Providing at required spacing to form modular framework,
pedestals madeout of GI tube of thickness minimum 2 mm and 25 mm outer
diameter, fullywelded on to the G.I. Base plate of size 100mm x 100mm x 3mm at
the bottomof the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm
weldedwith GI fully threaded stud 16mm outer diameter with two GI Check
nutsscrewed on the stud for level adjustment upto 50mm, locking and stabilizingthe
pedestal head in position at the required level. The pedestals shall be fixedto the
subfloor (base) through base plate using epoxy based adhesive of approved make
or the machine screw with rawl plug.(b) Stringers system in all steel construction hot
dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at
both ends for securingthe stringers on to the pedestal head using fully threaded
screws ensuring maximum lateral stability in all directions, the grid formed by the
pedestal and stringer assembly shall receive the floor panel, this system shall
provide adequate solid, rigid support for access floor panel, the system shall
provide a minimum clear uninterrupted clearance between the bottom of the floor
for electrical conduits and wiring etc. all complete as per the architectural drawings,
as specified and as directed by the Engineer-in-charge.(c) Providing and fixing
Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high
pressure Lamination of 800H grade (FS800H).

Page 3
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
15.01 Access Floor panel shall be steel welded construction with an enclosed bottom 76.00 sqm 4264.00 324064.00
pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of
Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together
(minimum 64 welds in each dome and 20 welds along each flange). The panel
should be Corroresist epoxy coated for lifetime rust protection and cavity formed by
the top and bottom plate is filled with Pyrogrip noncombustible Portland
cementitious core mixed with lightweight foaming compound. The access floor shall
be factory finished with Anti-static High Pressure laminate with Non Warp
technology upto 1mm thickness for superior adhesion and Surface flatness within
0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on
area 25mm x 25mm without collapse in the centre of the panel which is placed on
four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL)
minimum 1250 kg/sqm and an impact load of 50kg all complete as per the
approved manufacturers specification and as per the direction of Engineer-in-
charge. All specification must be printed on the side of the panel to ensure the
quality of the product.The cost includes
materials,labour,tools,conveyance,loading,unloading etc complete in all respect as
per direction of Engineer-in-charge.

16 Providing and fixing of Pelmet fabricated out of 19 mm thick Block Board frame 10.00 sqm 2951.00 29510.00
work and finished with matching 1mm thick laminet complete with hardware of
approved make including cost of material,labour,conveyance,tools etc complete in
all respect as per the drawing, specification complete in all respects excluding GST
as per the direction of Engineer in charge.

17 Providing,fitting and fixing the vertical blinds for all existing window with 100mm 6.00 sqm 1831.00 10986.00
size strips of fabric of approved make and shade and inclusive of all cost of
labour,materials complete in all respect complete in all respects excluding GST as
per the direction of Engineer in charge.

18 FURNITURE
19 A. SMART CLASS ROOM
20 Supply,Delivery & installation of ROUND TABLE : DIA. 900 X 11.00 NO 24600.00 270600.00
750H MM (Make- SOS/Godrej/equivalent) TABLETOP - It is made of
25 mm thick HDHMR POST LAM with machine pressed PVC edge band on all
sides. UNDERSTRUCTURE -SPLAYED LEG constructed of 40X40X1.6 mm thick
MS Pipe with caps & levellers .Cross member made of 40mm X 40mm X 1.6mm
MS pipe with .Cross members are mounted by cross member end brackets.WIRE
MANAGEMENT The Vertical (DUCT) & Horizontal(cable tray) wire carriers are
placed below worktop, made up of CRCA & Fixed to the understructure
with specially designed brackets. Provision of placing switch plates in the cable tray
which is easily accessible through a Access Flap (350L FOR DIA.900 & 450L FOR
DIA.1200 MM) . All metal compnents are powder coated finish with thickness of 50-
60μ DFT including cost of materials,delivery, etc. complete in all respects
excluding GST as per the direction of Engineer in charge.

21 Supply ,Delivery & installation of SPARK CHAIR (Make-SOS/Godrej/Equivalent 33.00 NO 7940.00 262020.00
Backrest : Mid back Upholstery : Backrest : Mesh (Black) Seat : Fabric (Black,
Red), Leatherite (Black) Armrest : 1D PP Armrest, Mechanism : Synchro 1P, Gaslift
: Class 4, 112mm Stroke Base : Nylon Base Castor : Nylon, Dia 60mm Lumber :
Yes Entire Body & Handle in GRey including cost and delivery, etc. complete in all
respects excluding GST as per the direction of Engineer in charge.

22 Supply, Delivery and Installation of PRELAM OPENABLE STORAGE: 2400 2.00 NO 100000.00 200000.00
(1200+1200)W X 400D X 1200H MM (Make- SOS/Godrej/Equivalent) TOP in 25
mm HDHMR POST LAM with PVC edge bands. Body, Shutter & Back in 18 mm
Prelaminated Particle board. with PVC edge bands. Shelves In 18 mm
Prelaminated Particle board. with PVC edge bands. with Adjustable Shelves
Handle FINGER GROOVE Type.including cost and delivery etc. complete in all
respects excluding GST as per the direction of Engineer in charge.

23 B.AV/VR ROOM
24 Supply, Delivery and Installation of LINEO CABIN TABLE :1500W X 750D X 750H 1.00 NO 49500.00 49500.00
MM WORKTOP (Make-SOS/Godrej/Equivalent)
- Made of 25 mm thick HDHMR POST LAM with machine pressed PVC edge
band on all sides. UNDERSTRUCTURE- Splayed leg is made of slant
40mmX40mmX1.6mm MS pipe with caps.Cross member is made of 40mm X
40mm X 1.6mm MS pipes. powder coated finish of 50 to 60 Microns DFT.
PERFORATED STEEL MODESTY (450H) to be made of 0.8mm thick CRCA
sheet with powder coated finish finish with the thickness of 50-60 μ & a bracket to
mount the modesty .
WIRE MANAGEMENT :The Vertical (duct) & Horizontal(Switch mounting box) wire
carriers are placed below worktop, made up of CRCA with Powder Coating & Fixed
to the understructure with specially designed brackets. Switch plates placed in the
switch
mounting, easily accessible through a Access Flap 450l L including cost and
delivery etc. complete in all respects excluding GST as per the direction of Engineer
in charge.

Page 4
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
25 Supply, Delivery and Installation of SPARK CHAIR (Make- 2.00 NO 7940.00 15880.00
SOS/Godrej/Equivalent) Backrest : Mid back Upholstery : Backrest : Mesh (Black)
Seat : Fabric (Black, Red), Leatherite (Black) Armrest : 1D PP Armrest, Mechanism
: Synchro 1P, Gaslift : Class 4, 112mm Stroke Base : Nylon Base Castor : Nylon,
Dia 60mm Lumber : Yes Entire Body
& Handle in GRey including cost and delivery etc. complete in all respects excluding
GST as per the direction of Engineer in charge.

26 Supply, Delivery and Installation of GAGA HIGH BACk CHAIR (MAKE - 1.00 NO 45000.00 45000.00
SOS/Godrej/Equivalent)
Backrest : High back (Headrest) Upholstery : Fabric (Black)
Armrest : 3D PU Armrest (Arm pad can be adjusted in 3 Directional movement,
Up Down, Front Rear, Swivel)
Mechanism : Synchro - 4P + Seat Slide (Seat and Back Synchronised Mechanism
with 4 point back angle Locking positions with seat depth Adjustment)
Gaslift : Class 4, 100mm Stroke Base : Nylon. Castor : Nylon, Dia 60mm Lumber :
Yes.including cost and delivery etc. complete in all respects excluding GST as per
the direction of Engineer in charge.

27 Supply, Delivery and Installation of UNI TRAINING CHAIR WITH LEVELLER 12.00 NO 7900.00 94800.00
(MAKE -SOS/Godrej/Equivalent) Backrest :
Injection Moulded Polypropylene Back rest upholstery with Black Mesh Seat
: Plywood + Foam upholstery with Fabric (Black, Red, Blue, Grey)
Under structure : MS Pipe Finish : Powder coat (black) Foot pad : Nylon glide
including cost and delivery etc. complete in all respects excluding GST as per the
direction of Engineer in charge.

28 DISSCUSION AREA
29 Supply, Delivery and Installation of ROUND TABLE : DIA. 1200 X 750H MM 1.00 NO 31500.00 31500.00
(MAKE -SOS/Godrej/Equivalent) TABLETOP - It is
made of 25 mm thick HDHMR POST LAM with machine pressed PVC edge band
on all sides.
UNDERSTRUCTURE -SPLAYED LEG constructed of 40X40X1.6 mm thick MS
Pipe with caps & levellers .Cross member made of 40mm X 40mm X 1.6mm MS
pipe with
.Cross members are mounted by cross member end brackets.
WIRE MANAGEMENT The Vertical (DUCT) & Horizontal(cable tray) wire
carriers are placed below worktop, made up of CRCA & Fixed to the
understructure with specially designed brackets. Provision of placing switch plates
in the cable tray which is easily accessible through a Access Flap (350L FOR
DIA.900 & 450L FOR DIA.1200 MM) . All metal compnents are powder coated
finish with thickness of 50-60μ DFT.including cost and delivery, etc. complete in all
respects excluding GST as per the direction of Engineer in charge.

30 Supply, Delivery and Installation of DUNE CHAIR (MAKE- 4.00 NO 9318.00 37272.00
SOS/Godrej/Equivalent) Backrest :
Mid back Upholstery : Backrest : Mesh (Black) Seat : Fabric (Black, Red),
Leatherite (Black) Armrest : 1D PP Armrest, Mechanism : Synchro 1P, Gaslift :
Class 4, 112mm Stroke Base : Nylon Base Castor : Nylon, Dia 60mm
Lumber : Yes Entire Body &
Handle in GRey.including cost and delivery etc. complete in all respects excluding
GST as per the direction of Engineer in charge.
31 EASE SOFA : SINGLE SEATE Frame(make-SOS/Godrej/Equivalent) : The 1.00 NO 30400.00 30400.00
sofa’s frame is made from solid, sustainable wood and commercial ply .
Upholstery: Fabric upholstered back and seat. Base-frame: 40x22x1.6mm thk SS
pipe, Base frame finish: SS (mirror finish). Modules:
1 seater 3 seaterincluding cost and delivery, etc. complete in all respects excluding
GST as per the direction of Engineer in charge.
32 Supply, Delivery and Installation of EASE SOFA : THREE SEATE Frame(Make- 1.00 NO 49600.00 49600.00
SOS/Godrej/Equivalent) : The sofa’s frame is made from solid, sustainable
wood and commercial ply . Upholstery: Fabric upholstered back and seat.
Base-frame: 40x22x1.6mm thk SS pipe, Base frame finish: SS (mirror finish).
Modules:
1 seater 3 seaterincluding cost of material,delivery etc. complete in all respects
excluding GST as per the direction of Engineer in charge.
33 Supply, Delivery and Installation of RECTANGULAR CENTRE TABLE : 900W X 1.00 NO 19500.00 19500.00
600D X 450H MM (Make-SOS/Godrej/Equivalent) TOP:-To be made
up of 25 mm Thick HDHMR POST LAM with Rev Chamfer Edge.
UNDERSTRUCTURE :-MS under structure + MS under structure with Lasercut Leg
in Sliver Grey Powder Coated finish ( for round & square center table).including cost
of materials, delivery etc. complete in all respects excluding GST as per the
direction of Engineer in charge.
34 Supply, Delivery and Installation of SQUARE CENTRE TABLE : 600W X600DX 1.00 NO 17800.00 17800.00
450H MM (MAKE-SOS/Godrej/Equivalent) TOP:-To
be made up of 25 mm Thick HDHMR POST LAM with Rev Chamfer Edge.
UNDERSTRUCTURE :-MS under structure + MS under structure with Lasercut Leg
in Sliver Grey Powder Coated finish ( for round & square center table) including cost
of materials, delivery etc. complete in all respects excluding GST as per the
direction of Engineer in charge.
35 LOBBY

Page 5
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
36 Supply, Delivery and Installation of EASE SOFA : SINGLE SEATER Frame : 2.00 NO 30400.00 60800.00
(Make-SOS/Godrej/Equivalent) The sofa’s frame is made from solid,
sustainable wood and commercial ply . Upholstery: Fabric upholstered back
and seat. Base-frame: 40x22x1.6mm thk SS pipe, Base frame finish: SS (mirror
finish). Modules:
1 seater 3 seater including cost of material, delivery etc. complete as per the
direction of the Engineer-in-charge
37 Supply, Delivery and Installation of EASE SOFA : THREE SEATE Frame : 1.00 NO 49600.00 49600.00
(Make-SOS/Godrej/Equivalent)The sofa’s frame is made from solid,
sustainable wood and commercial ply . Upholstery: Fabric upholstered back
and seat. Base-frame: 40x22x1.6mm thk SS pipe, Base frame finish: SS (mirror
finish). Modules:
1 seater 3 seater including cost of materials, delivery etc. complete in all respects
excluding GST as per the direction of Engineer in charge.
38 Supply, Delivery and Installation of RECTANGULAR CENTRE TABLE :(make- 1.00 NO 19500.00 19500.00
SOS/Godrej/Equivalent) 900W X 600D X 450H MM TOP:-To be made
up of 25 mm Thick HDHMR POST LAM with Rev Chamfer Edge.
UNDERSTRUCTURE :-MS under structure + MS under structure with Lasercut Leg
in Sliver Grey Powder Coated finish ( for round & square center table).including cost
of materials, delivery, complete as per the direction of the Engineer-in-charge .

39 Supply, Delivery and Installation of SQUARE CENTRE TABLE : 600W X 1.00 NO 17800.00 17800.00
600DX450H MM (MAKE-SOS/Godrej/Equivalent) TOP:-To
be made up of 25 mm Thick HDHMR POST LAM with Rev Chamfer Edge.
UNDERSTRUCTURE :-MS under structure + MS under structure with Lasercut Leg
in Sliver Grey Powder Coated finish ( for round & square center table) including cost
of materials, delivery, etc. complete as per the direction of the Engineer-in-charge .

40 CORRIDOR
41 Supply, Delivery and Installation of DUNE CHAIR Shell (MAKE- 5.00 NO 9318.00 46590.00
SOS/Godrej/Equivalent) : Moulded foam Upholstery : Fabric Understructure :
MS pipe Finish : Powder coat (black) check Foot pad : Nylon
glide including cost of materials, delivery etc. complete as per the direction of the
Engineer-in-charge .

42 Supply, Delivery and Installation of EASE SOFA : SINGLE SEATE Frame 4.00 NO 30400.00 121600.00
(make-SOS/Godrej/Equivalent) : The sofa’s frame is made from solid,
sustainable wood and commercial ply . Upholstery: Fabric upholstered back
and seat. Base-frame: 40x22x1.6mm thk SS pipe, Base frame finish: SS (mirror
finish). Modules:
1 seater 3 seater including cost of materials, delivery, etc. complete as per the
direction of the Engineer-in-charge
43 Supply, Delivery and Installation of ROUND CENTRE TABLE : DIA. 600 X 450H 2.00 NO 13400.00 26800.00
MM (MAKE -SOS/Godrej/Equivalent) TOP:-To
be made up of 25 mm Thick HDHMR POST LAM with Rev Chamfer Edge.
UNDERSTRUCTURE :-MS under structure + MS under structure with Lasercut Leg
in Sliver Grey Powder Coated finish ( for round & square center table). including
cost of materials, delivery, etc. complete as per the direction of the Engineer-in-
charge .

44 Internal Electrical work

45 Internal Wiring Items)
46 wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm
FRLSH PVC insulated single core multistrand copper conductor of ISI marked with
20 mm dia non-metalic PVC rigid conduit with 6Amp, 250 V modular type switch ISI
marked and ceiling rose ISI marked mounted on modular GI box with modular base
& cover of suitable size, MS box with 1.5 sq.mm FRLSH PVC insulated single core
multistrand copper conductor as earth wire including all accesories and connection
as per direction of Engineer in Charge.(Make
:Legrand(Myrius)/MK(elements)/schneider(Zencelo)
46.01 Single light controlled by one 6A switch or first point GROUP-A 15.00 Nos 488.00 7320.00

46.02 Single light controlled by one 6A switch or first point GROUP-B 20.00 Nos 546.00 10920.00

46.03 Single light controlled by one 6A switch or first point GROUP-C 30.00 Nos 680.00 20400.00

47 subsequent point of group controlWiring for group controlled (looped) light point/fan 15.00 Nos 382.00 5730.00
point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq.
mm FRLS PVC insulated copper conductor single core cable in surface/ recessed
PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper
conductor single core cable etc. as required.(Make
:Legrand(Myrius)/MK(elements)/schneider(Zencelo)

48 6A Plug on the same board with complete fitting by 01 no of 6A switch & socket 10.00 Nos 270.00 2700.00
(modular type) & other required accessories of ISI marked as approved(Make
:Legrand(Myrius)/MK(elements)/schneider(Zencelo)

Page 6
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
49 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket 10.00 Nos 290.00 2900.00
(modular type) & other required accessories of ISI marked as approved

50 2x6A Plug on the separate board For computer/UPS/other power point or TV 30.00 Nos 459.00 13770.00
point & other use for Data center/go down area with complete fitting by 02 nos of
6A switch & socket(modular type) cover,modular board & other required
accessories of ISI marked as approved(Make
:Legrand(Myrius)/MK(elements)/schneider(Zencelo)
51 Supplying and fixing 15/16A modular socket with 15/16A Switch on the modular 5.00 Nos 378.00 1890.00
plate & switch box including connections modular box , plate etc. as required.(Make
:Legrand(Myrius)/MK(elements)/schneider(Zencelo)/HAGER(insysta)

52 Wiring for circuits and submain with following number & sizes of FRLSH PVC
insulated 1100 volt grade multistranded copper conductor wire run inside
nonmetallic PVC rigid conduit recessed in ceiling/ column/ walls of building
including supply of all materials such as wires, conduit, junction box & pull box / duly
clamped to wall /ceiling or cable tray as suitable etc complete with making good the
damages caused as required and as per direction of Engineer-in-
charge.MAKE:KEI/HAVELLS/POLYCAB
52.01 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single 250.00 Mtr 102.00 25500.00
core 1.5 sq. mm copper wire for earth continuty conductor.
52.02 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single 150.00 Mtr 121.00 18150.00
core 2.5 sq. mm copper wire for earth continuty conductor.
52.03 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of 140.00 Mtr 150.00 21000.00
single core 4 sq. mm copper wire for earth continuty conductor.
52.04 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of 100.00 Mtr 194.00 19400.00
single core 6 sq. mm copper wire for earth continuty conductor.
52.05 4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of 60.00 Mtr 443.00 26580.00
single core 6 sq. mm copper wire for earth continuty conductor.
53 Supply, delivery, installation & testing of Modular G.I. box 18 SWG Sheet ISI 3.00 Nos. 432.00 1296.00
marked with Modular base & cover for 2 moudle telephone socket outlet.
54 Supply, delivery, installation & testing of Modular G.I. box 18 SWG Sheet ISI 3.00 Nos. 441.00 1323.00
marked with Modular base & cover for 2 moudle tv socket outlet.
55 Supplying and fixing stepped type electronic fan regulator on the existing modular 10.00 Nos. 248.00 2480.00
plate switch box including connections but excluding modular plate etc. as required.

56 Supplying, delivery, installation, testing and commissioning of indoor wall mounted

type telephone distrubution box having following number junction made out of .6 mm
thick CR sheet duly primered & painted with enamel paint having hinged front door
,testing facility having provision for cable conduit entry complete as per Direction of
Engineer-In-Charge.
57 Supply & installation junction box MDF suitable for 50 pair telephone cable 1.00 Nos 3000.00 3000.00
termination as per direction of E.I.C
58 Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm Four Pair 2 54.00 Mtrs. 12.00 648.00
Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete
including termination, testing etc complete as required and as per Direction of
Engineer-In-Charge.
59 Supply, delivery, installation and testing of TV Antenna Wires RG6 in PVC Pipe and 80.00 Mtrs. 16.00 1280.00
making good the damages caused complete as required and as per Direction of
Engineer-In-Charge.
60 Supply and Installation of Cat6 I/O with Face plate: The Outlet shall meet or exceed
requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information
outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be
verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector
shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be
compatible as per IEEE 802.3af standard for POE application. The PVC material of
Face plate should complie ABS /UL94-V-O certified. Make: Tyco / Legrand /
Molex
60.01 8.00 Nos 450.00 3600.00
I/O Dual
60.02 34.00 Nos 350.00 11900.00
I/O Single
60.03 SITC of Solid Cable, Cat6 Double Jacket, 4Pair, ,Cable Consists of PE Insulated 1200.00 mtrs 70.00 84000.00
23AWG Solid Bare Annealed Copper Conductors, 4Pair stranded over PE cross
Separator, Rip cord, LSZH/PVC Inner sheath and Polyethylene black colour Outer
Sheath , Standard ANSI/TIA 568-C.2 Category 6, ISO /IEC 11801 2nd Edition
Class E Performance specification up to 250 Mhz , UV resistance outer sheath ,
Inner Sheath Flame Retardant (IEC60332-1), RoHS Complaint. Make:
Digisol/Legrand/Tyco
60.04 Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch
Cords are Factory Tested for Better Quality and Suitable for the High Speed Data
Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard.
Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available
In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C,
2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot
Cable Assemblies. Make: Tyco / Legrand / Panduit

60.05 1mtr Lenghth 55.00 Nos 444.00 24420.00

60.06 2mtrs Length 50.00 Nos 571.00 28550.00

Page 7
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
60.07 Supply and installation of Cat 6, 24-port loaded, 1U Modular Jack Panel Should 3.00 Nos. 13627.00 40881.00
accommodate Cat6 with Rear Cable Management and Front removable Tooless
Information outlet. Should have easy clip management with labels and clear label
covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6
toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make:
R&M / Legrand / Systimax
60.08 Supply and installation of L-2 Managed Switch with minimum 24 X 10/100 Base- 2.00 Nos 30625.00 61250.00
T ports and additional 4 nos. SFP upl ink ports , Switch should have mia 56 Gbps
Switching Fabric and I6K MAC Address, Support 1Pv6 Management , support
LEEE 802.17/equivalent for sub 50ms ring protection, lGMP and MLD snooping,
Operating temperature 0 to 50 degree C, Shou ld support CLl, GUl, USB or
equivalent interface for talcing backu p, UDLD and single LP management of min 24
switches. Make: Cisco/HP/Netgear/Digisol
60.09 SITC of 24port IEEE 802.3af/at PoE 10/100/1000Mbps Managed Switch with Two 1.00 Nos. 71620.00 71620.00
Combo ports and minimum PoE power budget of 370W, Support IPv6
management, CLI/ WEB/ SNMP Management including 3years product warranty.
Make: Cisco/ HP/ Digisol
60.1 Supply and Installation of 24U 600/650D UL Listed Floor mount Rack with Front 1.00 Nos. 27479.00 27479.00
glass door with Cam lock, Rear mesh door with Cam lock and 3inch Castor Wheel
included with 1 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw
Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power
Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable
loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W
screw920sets). Make: Valrack/Rittal/ APW

60.11 Supply and installation ofIndoor AP with Dual band 802.11ax WiFi6 Dual Band 4.00 Nos. 36500.00 146000.00
Access Point with 2x2 in both 2.4 GHz and 5 GHz. Dual ports, 802.3at PoE
support, with managment on premise,/virtual controller/ cloud based controlling and
administration of WiFi systems withour changing hardware. All hardware should
supplied with necessary mounting brackets and IN power cord with 5 years
warranty. Make: Cisco / Ruckus / Grandstream
61 Supplying and fixing of following sizes of medium class PVC conduit along with
data,telephone,television etc..accessories in surface/recess including cutting the
wall and making good the same in case of recessed conduit as required.
61.01 20 MM 80.00 Mtr 54.00 4320.00

61.02 25 MM 70.00 Mtr 60.00 4200.00

62 Light fitting & Fixture
63 Supply, delivery, installation & testing of following Low height celling Fan Energy 14.00 Nos. 5392.00 75488.00
efficient pendant LED with warm cool natural light 1750 rpm air delivery 75 cmm 230
v all function on remort including loop connections and making good the damages
caused complete as required and as per direction of Engineer-in-
charge(MAKE:USHA/HALONIX/ORIENT/BAJAJ)
64 Supply delivery, installation, testing & commissioning of prewired, LED TUBE 2.00 Nos. 1208.00 2416.00
fittings with one No 20w watt,6K LED tube,of HALONIX MAKE , CAT No.HLB 03 20
CW AL HL1 OR equivallent complete etc.as required and as per the direction of
E.I.C..MAKE: WIPRO/HALONIX/LT/OSHRAM/PHILIPS
65 Supplying and fixing of 10 Watt LED inverter Bulb of HaLONIX make , OR 2.00 Nos. 348.00 696.00
equivallent to any other reputed make as approved etc as complete and as per the
direction of E.I.C.MAKE: WIPRO/HALONIX/LT/OSHRAM/PHILIPS/WIPRO
66 Supply delivery, installation, testing & commissioning of following types of 26.00 Nos. 5062.00 131612.00
RECESS/SURFACE mounted 36 watt indoor type LED panel 2' x 2' square LED
made Extruded aluminium housing 6000 cct IP20 Similar to Halonix Cat No.
HLFPR22-02-36 CWR WC or equivalent complete etc.as required and as per the
direction of E.I.C..MAKE: WIPRO/HALONIX/LT/OSHRAM/PHILIPS
67 Supply delivery, installation, testing & commissioning of Single Color LED flexible 2.00 NOS 4534.00 9068.00
Strip Light of 5 mtr with Driver, IP-20 All Strip lights are also available in WW
(3000K) color HALONIX Make:HLFSL-01-48-CW MAKE:
WIPRO/HALONIX/LT/OSHRAM/PHILIPS
68 Supply delivery, installation, testing & commissioning of following types of RECESS 15.00 Nos. 4322.00 64830.00
mounted 30 watt indoor type LEDDeep recessed, low glare, high power downlight
with die-cast AL frame with anodised aluminium reflector.
Low glare recessed fixed downlight in die-cast aluminium frame. Anodised
aluminium reflector for high efficiency. Similar to HALONIX Cat No. HLDLR R27 30
CW or equivalent complete etc.as required and as per the direction of
E.I.C..MAKE: WIPRO/HALONIX/LT/OSHRAM/PHILIPS
69 Supply delivery, installation, testing & commissioning of following types of 15watt 15.00 Nos. 1366.00 20490.00
RECESSED mounted indoor type Round LED Luminaire with LED Lamp Similar
to HALONIX Cat No.HLDLR-R21-15-CW-PC or equivalent complete etc.as
required and as per the direction of E.I.C.MAKE:
WIPRO/HALONIX/LT/OSHRAM/PHILIPS/WIPRO

70 Supply delivery, installation, testing & commissioning of 400 mm size wall fan , 4.00 Nos. 2544.00 10176.00
similar to HALONIX or equivalent complete etc.as required and as per the direction
of E.I.C.MAKE: WIPRO/HALONIX/LT/OSHRAM/PHILIPS/WIPRO
71 Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, 10.00 Nos. 28.00 280.00
heavy gauge including painting etc. as required. (Note : More than 5 cm length shall
be rounded to the nearest 2x10 cm .
72 Branch Distribution Boards

Page 8
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
73 Supplying and fixing of following mentioned way, three pole/single pole and neutral,
sheet steel,double door MCB distribution board, 415 volts/240 volts, on
surface/recess, complete with terminal blocks, duly prewired with suitable size FR
PVC insulated copper conducter up to terminal blocks, tinned copper busbar,
neutral busbar, earth bar, din bar make, or any other equivallent A catagories
reputed make ISI marked as approved MAKE;HAGER,LEGRAND,L&T

73.01 12 way, Double Door SPN DB (FOR light ) 1.00 Nos 2074.00 2074.00

73.02 4 way, Double Door TPN DB (FOR POWER) 1.00 Nos 2599.00 2599.00

73.03 12 way, Double Door SPN DB (FOR COMPUTER ) 2.00 Nos 2074.00 4148.00

74 Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles 32.00 Nos 157.00 5024.00
MCB of Legrand/L&T/Siemens make or any other equivallent A catagories
reputed make ISI marked as approved in the existing MCB DB complete with
connections.
75 Supply and fixing of 32/40 Amps 4P 415 volts, MCI Legrand/L&T/Siemens make or 1.00 Nos 697.00 697.00
any other reputad equevallent A catagories make ISI marked as approved in the
existing MCB DB complete with connections.
76 Supplying and fixing 25 Amps DP 240 volts, RCCB,30mA make or any other 2.00 Nos 1682.00 3364.00
reputad equevallent A catagories make ISI marked as approved in the existing
MCB DB complete with connections.
77 Earthing
78 Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked 2.00 Nos 9771.00 19542.00
including accessories and providing masonary with cover plate having loccking
arrangement and watering pipe etc (WITH charcoal and salt) as required.
79 Supply of materials and installation of pipe earth electrode made out of 40mm dia 2.00 Nos 4831.00 9662.00
class B G.I. pipe of 4.5 metre long with arrangements for fitting/ termination of G.I.
flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal,
salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with
removable RCC cover complete with labour for excavation of pit in all kinds of soil &
rock as required and as per direction of Engineer-in-charge.

80 Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing 40.00 Mtr 101.00 4040.00
as required.
81 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for 40.00 Mtr 38.00 1520.00
conductor earth electrode, including connection/ termination with GI thimble etc. as
required.
82 Providing and fixing 25mm x 5 mm copper strip on surface or in recess for 30.00 Mtr 856.00 25680.00
connections etc. as required.
83 Distribution Boards
83.01 Supply, delivery, installation, testing & commissioning of L.T. indoor floor /wall
mounted type distribution boards made out of 2mm thick CR sheet metal cubicle
fixed on m.s. channel base, duly acid treated for derusting, primered and painted
with 2 coats of enamel paint of approved shade, dust, damp & vermin proof, having
hinged door and compartmental arrangement for each equipment & busbar
chamber on the top of the panel running horizontally, having provision for cable/
conduit entry, earthing studs as per specification mentioned below duly factory
wired conforming to the relevant ISS and as per special conditions of contract
making good the damages caused complete as per the direction of Engineer-in-
charge(the vendor should be finilize the short circit wiring of breaker shall follow the
sourse panel).MAKE;HAGER,LEGRAND,L&T

83.02 MAIN PANEL

83.03 Incomer:1 100 A 4P MCCB (36 KA) with adjustable thermal setting+NL
83.04 Bus bar: 4 nos. 100A CU Busbar duly sleeved
83.05 2 Nos 40A 4P MCB.'C' (10kA)
83.06 5 Nos 32A DP MCB.'C' (10kA)
83.07 Instruments: 1 set.LED type phase indicating lamps with control fuses
83.08 1 no.100/5A CT operated Digital ammeter& Digital voltmeter
83.09 Complete duly factory wired as per SLD and panel should have proper earth by 1.00 Set 45335.00 45335.00
suitable rated cupper flat.
83.1 MDB-HVAC PANEL
83.11 Incomer:1 100A 4P MCCB(25 KA) with adjustable thermal setting+NL
83.12 Bus bar: 4 nos. 100A Busbar duly sleeved
83.13 4 No 63A 4P MCB.'C' (10kA)
83.14 Instruments: 1 set.LED type phase indicating lamps with control fuses
83.15 1 no.100/5A CT operated Digital ammeter
83.16 1nos Digital voltmeter & AMETER
83.17 Complete duly factory wired as per SLD and panel should have proper earth by 1.00 Set 41870.00 41870.00
suitable rated cupper flat.
84 Cable and HDPE Pipe
85 Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip
armoured aluminium / Copper conductor power cables of 1100 volt grade laid
directly unground with sand cushioning, brick protection, clamped on surface of the
walss / columns / existing RCC / inside masonry cable trenches / on the cable tray
/throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of
shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes
cpmplete with making good to the damages as required and as per direction of
Engineer-in-charge.
85.01 3.5 core x 50 sq mm Aluminium armoured Cable.(FOR FLOOR PANEL) 80.00 Mtr. 608.00 48640.00

Page 9
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
85.02 2 Core flexiable 10 sqmm copper armoured cable 20.00 Mtr. 300.00 6000.00
86 Supplying and making end termination with brass compression gland and aluminium
lugs for following mentioned size cable.
86.1 4.00 Nos 233.00 932.00
3.5 core x 50 sq mm Aluminium armoured Cable.
87 Supply of materials, Fixing of G.I perforated cable tray along with hanging
arrangements & supports fabrication complete. For following sizes.
87.01 300x50x1.6 mm thick. 80.00 Mtr 709.00 56720.00

88 GI raceways made of pre-galvanished sheet (DX51D Z120 MAC) with thickness of

1.5mm for distributing LV and ELV cabling in screed floors installations. Can be
combined with junction boxes, backboxes (floorboxes) for wiring devices, fixing and
coupler accessories. Consist of body & cover. Cover fitted on to the body with
screws & can be opened easily if required. Particularly suitable for applications
requiring EMC screening. Protection level should be IP 20 & IK 08. Standard length
should be 2.44 mtrs. Confirms to standard EN 60-670, EN 50 085 - 2 - 2 & IEC
61534-22. Resistance to vertical load applied through small surface area should be
1500 N & Resistance to vertical load applied through large surface area should be
3000 N. Linear impedance in mili ohm /m of metal raceways length 5 mili
ohm/m.Race ways should be supplied with complete accessories i.e. fixing brackets
& couplers for joining raceways from the same manufacturer.
Make:Legrand/MK/penduit .

88.01 30.00 Mtr. 3063.00 91890.00

300 mm x 38 mm GI Race way with fixing bracet coupler
89 6 KVA UPS
90 Supply & installation of 6 KVA On Line UPS System with IGBT based Rectifier & 1.00 SET 189899.00 189899.00
Inverter, single phase ( 230VAC) input & output with Incoming 63A DPMCB KA
breaker & outgoing 2 NOS 40A DP MCB 10 KA breaker , unity output power factor,
operating temperature upto 50 Deg. C, altitude up to 3000 mtr, graphical LCD
display on UPS front panel and inbuilt static and maintenance bypass switch along
with SMF Battery for 30 minutes back up..Make EMERSON , , APC,Numeric

90.01 INPUT:AC INPUT VOLTAGE:400 VAC, +/- 20%, 3 phase,FREQUENCY

WINDOW :50 Hz., 45Hz to 65 Hz
90.02
BATTERY:Exide, Amar Raja, Rocket ( GY) SMF battery,BACK UP TIME:30 Min.,
91 OUTPUT RATING :6 KVA ,POWER FACTOR:0.9,VOLTAGE :400VAC +/- 1%,
3Phase/ SINGLE PHASE.FREQUENCY:50+/-0.1 Hz,OVERLOAD CAPACITY
:110% for 60 min., 125% for 10 minutes 150% for 1 minute,ISOLATION:Should
have inbuilt Isolation Transformer for isolation between input & output.

92 TRANSIET VOLTAGE SURGE SUPPERVISOR:Each UPS should have TVSS of

50KA rating having protection level < 1KV, response time < 0.5 nano sec, all 10
modes protection.STATIC SWITCH:Should have inbuilt static bypass with overload
capacity of 10 times for 100 millisec and 14 times for 10 millisec.

93 STATIC SWITCH:Should have inbuilt static bypass with overload capacity of 10

times for 100 millisec and 14 times for 10 millisec.MANUAL BYPASS :UPS should
have inbuilt make before break type Maintenance Bypass switch.Operating
temperature: upto 40 deg. C,RELATIVE HUMNITY:5 to 95% without condensation.

94 VRV SYSTEM
95 EQUIPMENT
96 Supply Installation, Testing & Commissioning of following fully factory assembled
Variable Refrigerant Volume(VRV)-X type multi unit air condioning system with
inverter type outdoor units with individual controller for cooling type operations.The
VRV outdoor unit shall be equipped highly efficiency Hermetically sealed all
inverter type scroll compressor(s) having at least 6 Pole motor & manufactured by
OEM.The outdoor unit needs to be equipped with two compressors. The condenser
fan should have minimum External Static Pressure of 78 Pa so as to avoid short
cycling of hot air and refrigerant cooled PCB for enhanced reliability during peak
temperature.The Outdoor unit must be capable of Varying the Refrigerant
Temperature(VRT) in order to work more efficiently.Make: LG/
DAIKIN/MITUSUBUSHI/HITACHI

96.01 1.00 Nos. 441051.00 441051.00

Nominal Capacity - 20 HP
97 Supply Indoor units for VRV systems with Remote & Refnets
97.01 Round Flow Cassette AC with Cordless Remote & sensing panel
98 Supply Installation, Testing & Commissioning of following minimum capacity 4-way/
round flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with
cordless remote ,Cassette panel, synthetic washable media pre-filter, fan section
with low noise fan/dynamically balanced blower, multispeed motor, coil section with
DX copper coil, electronic expansion valve, outer cabinet, drain pan, drain pump,
cassette grill, insulation, necessary supports, vibration isolation etc, suitable for
operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required.
The unit shall have automatic force shut down provision in case of fire. All indoor
Units should have force shut option to connect with fire alarm adaptor, so that the
unit automatically stops in case or fire. The cooling capacity of indoor unit will be at
air inlet conditions of 27 degree C DBT and 19 degree C WBT. All 4 louvers of the
unit shall be independently adjustable for positiion as per user preference.

Page 10
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
99 The cassettes units shall have dual sensor which detect the presence of people
and floor temperature to provide comfortable air-conditioning and energy saving.
The sensor should detects human presence and adjust the airflow direction
automatically to prevent drafts. Room temperature should increase upto 4 deg C or
the indoor to be switched off when no people are detected or as per user
preference. The sensor should detects the floor temperature and automatically
adjusts the operation of the indoor unit to reduce the temperature difference
between the ceiling and the floor. Make-DAIKIN,/MITUSUBUSHI/HITACHI

99.01 2.00 Nos 54603.00 109206.00

Nominal Capacity - 0.8 TR
99.02 1.00 Nos 60351.00 60351.00
Nominal Capacity - 1.65 TR
99.03 4.00 Nos 61619.00 246476.00
Nominal Capacity - 2.08 TR
99.04 2.00 Nos 69987.00 139974.00
Nominal Capacity - 4.12 TR
100 Supply,installation, testing and commissioning of Interconnecting refrigerant pipe
work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular
insulation between each set of indoor & outdoor units as per specifications, all
piping.
100.01 Suction Line pipe with 19mm thick insulation
100.02 15.00 Rmt 1250.00 18750.00
28.6 mm
100.03 22.2 mm 10.00 Rmt 860.00 8600.00
100.04 19.1 mm 12.00 Rmt 850.00 10200.00
100.05 27.00 Rmt 700.00 18900.00
15.9 mm
100.06 14.00 Rmt 480.00 6720.00
12.7 mm
100.07 Liquid Line pipe with 13mm thick insulation
100.08 15.9 mm 10.00 Rmt 650.00 6500.00
100.09 5.00 Rmt 450.00 2250.00
12.7 mm
100.1 49.00 Rmt 380.00 18620.00
9.5 mm
100.11 14.00 Rmt 310.00 4340.00
6.4mm
100.12 Condensate Drain Pipe :
101 Supply, installation, testing & Commissioning of following sizes insulated PVC drain
pipes insulated with 9mm thick nitrile rubber insulation of following size
101.01 60.00 Rmt 180.00 10800.00
32/40 mm Dia with 9mm Nitrile Rubber Insulation
102 Control & Transmission Wiring :
103 Supply Installation Testing and Commission of 2 C x 1 sq.mm Cu communication 90.00 Mtr. 175.00 15750.00
cable Control wiring of copper in suitable conduits between indoor and outdoor units
complete with making good the damages caused as required and as per Direction
of Engineer-In-Charge. Make: Polycab/ Havells/ Anchor/ RR Cabel/ Finolex

104 10.00 Kgs 1150.00 11500.00

Supply & Comissioning of Refrigerant R410A gas
105 FIRE ALRAM & EXTNIGUSHER SYSTEM
106 EXTINGUISHER & PA SYSTEM
107 Supplying, installation, testing and commissioning of ABC type fire extinguishers of 4.00 Nos 4446.00 17784.00
6 kg capacity including cost of all material & labour etc complete. (Make:
SUPREMEX / FIREBOY / AMEREX)
108 Portable Fire Extinguisher System Supplying, installation, testing and 1.00 Nos 7500.00 7500.00
commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878
made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI
marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose
& horn complete with initial gas charged with carrying handle & wall mounting
bracket as per direction of Engineer-in-charge. (Make: SUPREMEX / FIREBOY /
AMEREX)
109 PUBLIC ADDRESS SYSTEM Supplying, installation, testing & commissioning of 6 1.00 Nos 111918.00 111918.00
zone,voice alarm controller with USB, MP3 player (including 6 zone button paging
station) with seamless integration facility with main fire alarm panel for voice
evacuation complete as required MAKE: HONEYWELL/BOSE/HEINRICH/ Eq
make
110 Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 1.00 Nos 85677.00 85677.00
25V rms operating at 240 Volt AC Supply complete as required. MAKE:
HONEYWELL/BOSE/HEINRICH/ Eq make
111 Supplying, installation, testing & commissioning of ceiling/wall mounted loud 10.00 Nos 2122.00 21220.00
speaker, 3/15 Watt in ABS enclosure complete as required
112 Supplying and drawing of speaker cable Single pair, 2-core, 1.5 sqmm all complete 400.00 Mtr. 72.00 28800.00
as per apporoved specification & direction of EIC
113 FIRE ALRAM CONVENTIONAL SYSTEM
114 S/I/T/C of 2 Zone, 2 Programmable Sounder Circuit, Repeater Output against per 1.00 Nos 30791.00 30791.00
zone, 1 Fire Output, 1 Fault Output, Built-in Battery Charger, Excluding Batteries
(Certified by LPCB) Optional Accessories: 3711882 as per direction of Engineer-in-
charge.make:SCHRACK/RAVEL/HONEYWELL/EQ

Page 11
NUMBE TEXT # NUMBER # TEXT # NUMBER NUMBER #
R#
Sl. Item Description Quantity Units Estimated Rate in TOTAL AMOUNT
No. Rs. P Without Taxes in
Rs. P

1 2 4 5 6 53
115 Supplying, installation, testing & commissioning of heat detector operating at 54ºC/ 12.00 Nos 919.00 11028.00
57ºC with rate of rise cum fixed tempreature (dual thermistor) type with mounting
base complete with all connection etc. as required.make:SCHRACK/RAVEL/HONE
YWELL/EQ

116 Supply, Installation, Testing & Commissioning of Conventional Photoelectric Smoke 10.00 Nos 993.00 9930.00
Detector, Programmable A1R/A2S/BS Alarm, With Remote Indicator Output and
Magnetic Test Function, Without Base (Certified by LPCB) as per direction of
Engineer-in-charge.make:SCHRACK/RAVEL/HONEYWELL/EQ
117 Supplying, installation, testing & commissioning of manual call box of ABS type in 2.00 Nos 333.00 666.00
surface/recess with stainless steel chain & hammer assembly complete with glass
and push button etc. as required. make:SCHRACK/RAVEL/HONEYWELL/EQ

118 Supplying, installation, testing & commissioning fire alarm sounder with facility to 2.00 Nos 465.00 930.00
make announcement, mounted in M.S. box (16 SWG) with hinged cover plate &
suitable for operation with amplifier i/c line matching transformer etc. complete as
required.make:SCHRACK/RAVEL/HONEYWELL/EQ
119 Supplying installation testing and commissioning of Response indicatorsand 10.00 Nos 420.00 4200.00
accessories and module if require as per direction of Engineer-incharge.
120 Supplying installation testing and commissioning of a pair of 1.5 sq.mm single core 120.00 Nos 150.00 18000.00
FRLS cable (2X1.5sq mm) to be laid within 25mm dia MS conduit 18 swg GI wire
complete for Fire Alarm wiring of suitable size to be erected above the wall or
concealed, as the case may be, with all accessories & shall be VDS Approved, as
per direction of Engineer-in-charge.make: polycab
121 CCTV
121.01 Supply and Installation of 5MP Vendal Proof Mini Dome Camera with AI Video 5.00 Nos 15778.00 78890.00
analytics supporeted, H.265+ Video Compression, 4K HD resolution with Frame
rate of 30fps, 140dB Super WDR technology and SIP protocol supported. Make:
Milesight/Axis/Pelco
121.02 Supply and Installation of 32Chanel 4K UHD NVR with 8SATA*10TB storage 1.00 Nos 86553.00 86553.00
capacity, Decode up to 4-CH 4K UHD & 16-CH 1080P, ANR/RAID/N+1 Hot Spare,
Dual Lan interface(for Multi addressing, Load balancing and Net Fault-tolerance)
and Multi-video output. Make: Milesight/Axis/Pelco
121.03 1.00 Nos 25278.00 25278.00
8TB Surveillence Hardisk. Make: Seagate/WD
122
N.B - (i) Sample/MAKE of materials/product shall be approved by competent
authority before procurement and use
(ii)The bidders are required to Quote their rates excluding of Goods & Service
Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and
any amendment made in future will be followed.

Total in 6686446.45
Figures

Quoted Rate in Figures 0.00

Select

Quoted Rate in Words INR Zero Only

Page 12
d any amendment made in future will be followed)

TEXT #

TOTAL AMOUNT
In Words

55

INR Eighty Two Thousand Three Hundred

& Eighty Six and Paise Sixty Two Only

INR Thirty Five Thousand Six Hundred &

Forty Eight and Paise Thirty Six Only

INR Forty Thousand Three Hundred &

Three and Paise Ninety One Only

INR Thirty Five Thousand Eight Hundred &

Four and Paise Ninety Five Only

INR Two Lakh Thirty Eight Thousand Eight

Hundred & Ten Only

Page 13
 TEXT #

TOTAL AMOUNT
In Words

55
INR Seven Thousand Two Hundred &
Thirty Five and Paise Twenty Only

INR One Lakh Twenty Three Thousand

Five Hundred & Eleven and Paise Seventy
Eight Only

INR One Lakh Sixty Two Thousand Nine

Hundred & Seventy One and Paise Sixty
Four Only

Page 14
 TEXT #

TOTAL AMOUNT
In Words

55
INR Five Lakh Seventy Four Thousand
Eight Hundred & Fifty One and Paise
Ninety One Only

INR Forty Eight Thousand One Hundred &

Twenty Nine and Paise Forty Eight Only

INR Two Lakh Sixty Seven Thousand

Three Hundred & Eighteen and Paise Sixty
Only

Page 15
 TEXT #

TOTAL AMOUNT
In Words

55
INR Three Lakh Twenty Four Thousand
&Sixty Four Only

INR Twenty Nine Thousand Five Hundred

& Ten Only

INR Ten Thousand Nine Hundred & Eighty

Six Only

INR Two Lakh Seventy Thousand Six

Hundred Only

INR Two Lakh Sixty Two Thousand

&Twenty Only

INR Two Lakh Only

INR Forty Nine Thousand Five Hundred

Only

Page 16
 TEXT #

TOTAL AMOUNT
In Words

55
INR Fifteen Thousand Eight Hundred &
Eighty Only

INR Forty Five Thousand Only

INR Ninety Four Thousand Eight Hundred

Only

INR Thirty One Thousand Five Hundred

Only

INR Thirty Seven Thousand Two Hundred

& Seventy Two Only

INR Thirty Thousand Four Hundred Only

INR Forty Nine Thousand Six Hundred

Only

INR Nineteen Thousand Five Hundred

Only

INR Seventeen Thousand Eight Hundred

Only

Page 17
 TEXT #

TOTAL AMOUNT
In Words

55
INR Sixty Thousand Eight Hundred Only

INR Forty Nine Thousand Six Hundred

Only

INR Nineteen Thousand Five Hundred

Only

INR Seventeen Thousand Eight Hundred

Only

INR Forty Six Thousand Five Hundred &

Ninety Only

INR One Lakh Twenty One Thousand Six

Hundred Only

INR Twenty Six Thousand Eight Hundred

Only

INR Seven Thousand Three Hundred &

Twenty Only
INR Ten Thousand Nine Hundred &
Twenty Only
INR Twenty Thousand Four Hundred
Only
INR Five Thousand Seven Hundred &
Thirty Only

INR Two Thousand Seven Hundred Only

Page 18
 TEXT #

TOTAL AMOUNT
In Words

55
INR Two Thousand Nine Hundred Only

INR Thirteen Thousand Seven Hundred &

Seventy Only

INR One Thousand Eight Hundred &

Ninety Only

INR Twenty Five Thousand Five Hundred

Only
INR Eighteen Thousand One Hundred &
Fifty Only
INR Twenty One Thousand Only

INR Nineteen Thousand Four Hundred

Only
INR Twenty Six Thousand Five Hundred &
Eighty Only
INR One Thousand Two Hundred & Ninety
Six Only
INR One Thousand Three Hundred &
Twenty Three Only
INR Two Thousand Four Hundred & Eighty
Only

INR Three Thousand Only

INR Six Hundred & Forty Eight Only

INR One Thousand Two Hundred & Eighty

Only

INR Three Thousand Six Hundred Only

INR Eleven Thousand Nine Hundred

Only
INR Eighty Four Thousand Only

INR Twenty Four Thousand Four Hundred

& Twenty Only
INR Twenty Eight Thousand Five Hundred
& Fifty Only

Page 19
 TEXT #

TOTAL AMOUNT
In Words

55
INR Forty Thousand Eight Hundred &
Eighty One Only

INR Sixty One Thousand Two Hundred &

Fifty Only

INR Seventy One Thousand Six Hundred &

Twenty Only

INR Twenty Seven Thousand Four

Hundred & Seventy Nine Only

INR One Lakh Forty Six Thousand Only

INR Four Thousand Three Hundred &

Twenty Only
INR Four Thousand Two Hundred Only

INR Seventy Five Thousand Four Hundred

& Eighty Eight Only

INR Two Thousand Four Hundred &

Sixteen Only

INR Six Hundred & Ninety Six Only

INR One Lakh Thirty One Thousand Six

Hundred & Twelve Only

INR Nine Thousand &Sixty Eight Only

INR Sixty Four Thousand Eight Hundred &

Thirty Only

INR Twenty Thousand Four Hundred &

Ninety Only

INR Ten Thousand One Hundred &

Seventy Six Only

INR Two Hundred & Eighty Only

Page 20
 TEXT #

TOTAL AMOUNT
In Words

55

INR Two Thousand &Seventy Four Only

INR Two Thousand Five Hundred & Ninety

Nine Only
INR Four Thousand One Hundred & Forty
Eight Only
INR Five Thousand &Twenty Four Only

INR Six Hundred & Ninety Seven Only

INR Three Thousand Three Hundred &

Sixty Four Only

INR Nineteen Thousand Five Hundred &

Forty Two Only

INR Nine Thousand Six Hundred & Sixty

Two Only

INR Four Thousand &Forty Only

INR One Thousand Five Hundred &

Twenty Only

INR Twenty Five Thousand Six Hundred &

Eighty Only

INR Forty Five Thousand Three Hundred &

Thirty Five Only

INR Forty One Thousand Eight Hundred &

Seventy Only

INR Forty Eight Thousand Six Hundred &

Forty Only

Page 21
 TEXT #

TOTAL AMOUNT
In Words

55
INR Six Thousand Only

INR Nine Hundred & Thirty Two Only

INR Fifty Six Thousand Seven Hundred &

Twenty Only

INR Ninety One Thousand Eight Hundred

& Ninety Only

INR One Lakh Eighty Nine Thousand Eight

Hundred & Ninety Nine Only

INR Four Lakh Forty One Thousand &Fifty

One Only

Page 22
 TEXT #

TOTAL AMOUNT
In Words

55

INR One Lakh Nine Thousand Two

Hundred & Six Only
INR Sixty Thousand Three Hundred & Fifty
One Only
INR Two Lakh Forty Six Thousand Four
Hundred & Seventy Six Only
INR One Lakh Thirty Nine Thousand Nine
Hundred & Seventy Four Only

INR Eighteen Thousand Seven Hundred &

Fifty Only
INR Eight Thousand Six Hundred Only
INR Ten Thousand Two Hundred Only
INR Eighteen Thousand Nine Hundred
Only
INR Six Thousand Seven Hundred &
Twenty Only

INR Six Thousand Five Hundred Only

INR Two Thousand Two Hundred & Fifty
Only
INR Eighteen Thousand Six Hundred &
Twenty Only
INR Four Thousand Three Hundred & Forty
Only

INR Ten Thousand Eight Hundred Only

INR Fifteen Thousand Seven Hundred &

Fifty Only

INR Eleven Thousand Five Hundred Only

INR Seventeen Thousand Seven Hundred

& Eighty Four Only

INR Seven Thousand Five Hundred Only

INR One Lakh Eleven Thousand Nine

Hundred & Eighteen Only

INR Eighty Five Thousand Six Hundred &

Seventy Seven Only

INR Twenty One Thousand Two Hundred

& Twenty Only
INR Twenty Eight Thousand Eight Hundred
Only

INR Thirty Thousand Seven Hundred &

Ninety One Only

Page 23
 TEXT #

TOTAL AMOUNT
In Words

55
INR Eleven Thousand &Twenty Eight
Only

INR Nine Thousand Nine Hundred & Thirty

Only

INR Six Hundred & Sixty Six Only

INR Nine Hundred & Thirty Only

INR Four Thousand Two Hundred Only

INR Eighteen Thousand Only

INR Seventy Eight Thousand Eight

Hundred & Ninety Only

INR Eighty Six Thousand Five Hundred &

Fifty Three Only

INR Twenty Five Thousand Two Hundred

& Seventy Eight Only

INR Sixty Six Lakh Eighty Six Thousand

Four Hundred & Forty Six and Paise Forty
Five Only
INR Zero Only

Page 24