Partial FCC Test Report

(PART 22)

Report No.: RF190514C12

FCC ID: 2ATM8EC25A

Test Model: EC25-A

Received Date: May 14, 2019

Test Date: May 28 ~ May 30, 2019

Issued Date: Jul. 26, 2019

Applicant: Hawkeye Tech Co., Ltd.

Address: 13F. No.736, Zhongzheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan

Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan
( R.O.C)
Test Location (1): No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City
33383, TAIWAN (R.O.C.)
Test Location (2): B2F., No.215, Sec. 3, Beixin Rd., Xindian Dist., New Taipei City 231,
Taiwan, R.O.C
FCC Registration / 788550 / TW0003
Designation Number: 427177 / TW0011

This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product
unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you
provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided,
however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific
mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification.
The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies

Report No.: RF190514C12 Page No. 1 / 22 Report Format Version: 6.1.1

 Table of Contents
Release Control Record .................................................................................................................................. 3
1 Certificate of Conformity ........................................................................................................................... 4
2 Summary of Test Results ........................................................................................................................... 5
2.1 Measurement Uncertainty ..................................................................................................................... 5
2.2 Test Site and Instruments ..................................................................................................................... 6
3 General Information ................................................................................................................................... 7
3.1 General Description of EUT .................................................................................................................. 7
3.2 Configuration of System under Test ...................................................................................................... 8
3.2.1 Description of Support Units ....................................................................................................... 8
3.3 Test Mode Applicability and Tested Channel Detail .............................................................................. 9
3.4 EUT Operating Conditions .................................................................................................................... 9
3.5 General Description of Applied Standards ............................................................................................ 9
4 Test Types and Results ............................................................................................................................ 10
4.1 Output Power Measurement ............................................................................................................... 10
4.1.1 Limits of Output Power Measurement ...................................................................................... 10
4.1.2 Test Procedures ........................................................................................................................ 10
4.1.3 Test Setup .................................................................................................................................. 11
4.1.4 Test Results .............................................................................................................................. 12
4.2 Radiated Emission Measurement ....................................................................................................... 13
4.2.1 Limits of Radiated Emission Measurement .............................................................................. 13
4.2.2 Test Procedure ......................................................................................................................... 13
4.2.3 Deviation from Test Standard ................................................................................................... 13
4.2.4 Test Setup ................................................................................................................................. 14
4.2.5 Test Results .............................................................................................................................. 15
5 Pictures of Test Arrangements................................................................................................................ 21
Appendix – Information of the Testing Laboratories ................................................................................. 22

Report No.: RF190514C12 Page No. 2 / 22 Report Format Version: 6.1.1

 Release Control Record

Issue No. Description Date Issued

RF190514C12 Original Release Jul. 26, 2019

Report No.: RF190514C12 Page No. 3 / 22 Report Format Version: 6.1.1

1 Certificate of Conformity

Product: LTE Module

Brand: Quectel

Test Model: EC25-A

Sample Status: Engineering Sample

Applicant: Hawkeye Tech Co., Ltd.

Test Date: May 28 ~ May 30, 2019

Standards: FCC Part 22, Subpart H

The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s RF characteristics under the conditions specified in this report.

Prepared by : , Date: Jul. 26, 2019

Lena Wang / Specialist

Approved by : , Date: Jul. 26, 2019

Dylan Chiou / Project Engineer

Report No.: RF190514C12 Page No. 4 / 22 Report Format Version: 6.1.1

2 Summary of Test Results

Applied Standard: FCC Part 22 & Part 2

FCC
Test Item Result Remarks
Clause
2.1046
Effective Radiated Power Pass Meet the requirement of limit.
22.913 (a)
2.1047 Modulation Characteristics N/A Refer to Note
2.1046
Peak to Average Ratio N/A Refer to Note
22.913 (d)
2.1055
Frequency Stability N/A Refer to Note
22.355
2.1049 Occupied Bandwidth N/A Refer to Note
22.917 Band Edge Measurements N/A Refer to Note
2.1051
Conducted Spurious Emissions N/A Refer to Note
22.917
Meet the requirement of limit.
2.1053
Radiated Spurious Emissions Pass Minimum passing margin is -32.16 dB
22.917
at 34.05 MHz.
Note:
1. This report is a partial report. Therefore, only test item of Effective Radiated Power and Radiated
Spurious Emissions tests were performed for this report. Other testing data please refer to Bay Area
Compliance Laboratories Corp.(Taiwan) report no.: RTWK160705001-00 for module (Brand: Quectel,
Model: EC25-A)
2. Determining compliance based on the results of the compliance measurement, not taking into account
measurement instrumentation uncertainty.

2.1 Measurement Uncertainty

Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the
EUT as specified in CISPR 16-4-2:

Expanded Uncertainty
Measurement Frequency
(k=2) (±)
9 kHz ~ 30 MHz 3.0400 dB
Radiated Emissions up to 1 GHz 30 MHz ~ 200 MHz 2.0153 dB
200 MHz ~ 1000 MHz 2.0224 dB
1 GHz ~ 18 GHz 1.0121 dB
Radiated Emissions above 1 GHz
18 GHz ~ 40 GHz 1.1508 dB

Report No.: RF190514C12 Page No. 5 / 22 Report Format Version: 6.1.1

2.2 Test Site and Instruments

Description & Date of Due Date of

Model No. Serial No.
Manufacturer Calibration Calibration
Test Receiver
N9038A MY52260177 Aug. 20, 2018 Aug. 19, 2019
Agilent Technologies
BILOG Antenna
VULB9168 9168-616 Nov. 27, 2018 Nov. 26, 2019
SCHWARZBECK
BILOG Antenna
VULB9168 9168-631 Nov. 26, 2018 Nov. 25, 2019
SCHWARZBECK
HORN Antenna
3117 00143293 Nov. 25, 2018 Nov. 24, 2019
ETS-Lindgren
HORN Antenna
BBHA 9120D 9120D-969 Nov. 25, 2018 Nov. 24, 2019
SCHWARZBECK
Fixed Attenuator
MDCS18N-10 MDCS18N-10-01 Apr. 15, 2019 Apr. 14, 2020
Mini-Circuits
MXG Vector signal
generator N5182B MY53050430 Nov. 19, 2018 Nov. 18, 2019
Agilent
Preamplifier
310N 187226 Jun. 19, 2018 Jun. 18, 2019
Agilent
Preamplifier
83017A MY39501357 Jun. 19, 2018 Jun. 18, 2019
Agilent
Cable-CH1-
01(RFC-SMS-100-
RF signal cable
5D-FB SMS-120+RFC- Jun. 19, 2018 Jun. 18, 2019
ETS-LINDGREN
SMS-100-SMS-
400)
Cable-CH1-
RF signal cable
8D-FB 02(RFC-SMS-100- Jun. 19, 2018 Jun. 18, 2019
ETS-LINDGREN
SMS-24)
Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA
Software E3
NA NA NA
BV ADT 8.130425b
Antenna Tower
NA NA NA NA
MF
Turn Table
NA NA NA NA
MF
Antenna Tower &Turn
Table Controller MF-7802 NA NA NA
MF
Communications Tester-
Wireless 8960 Series 10 MY53201073 Jun. 28, 2017 Jun. 27, 2019
Agilent

Note: 1. The calibration interval of the above test instruments is 12 / 24 months and the calibrations are
traceable to NML/ROC and NIST/USA.
2. The test was performed in HsinTien Chamber 1.

Report No.: RF190514C12 Page No. 6 / 22 Report Format Version: 6.1.1

3 General Information
3.1 General Description of EUT

Product LTE Module

Brand Quectel
Test Model EC25-A
Status of EUT Engineering Sample
Power Supply Rating 3.8 Vdc (Host equipment)
Modulation Type WCDMA QPSK
Frequency Range WCDMA 826.4 ~ 846.6 MHz
Max. ERP Power WCDMA 81.10 mW
Antenna Type Dipole Antenna with -1.6 dBi gain
Accessory Device N/A
Data Cable Supplied N/A
Note:
1. The EUT was installed in a specific End-product.
Product Brand Model FCC ID

veeaHub VHE10XXX (X=A-Z, 0-9, blank or “-“) 2ARXKVHE10

2. The End-product contains following accessory devices.
Product Brand Model Description
I/P: 100-240 Vac, 50/60 Hz, 2.5A
Adapter EDACPOWER ELEC. EA1062SGR-480 O/P: 48 Vdc, 1.35 A
1.2m DC cable with 1 core
3. The above EUT information is declared by manufacturer and for more detailed features description,
please refers to the manufacturer's specifications or user's manual.

Report No.: RF190514C12 Page No. 7 / 22 Report Format Version: 6.1.1

3.2 Configuration of System under Test

<Radiated Emission Test> & <E.R.P. Test>

Host EUT (Powered from Host equipment)

Test table

Radio
Communication
Analyzer

*Kept in a remote area

3.2.1 Description of Support Units

The EUT has been tested as an independent unit together with other necessary accessories or support units.

Report No.: RF190514C12 Page No. 8 / 22 Report Format Version: 6.1.1

3.3 Test Mode Applicability and Tested Channel Detail

Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between
available modulations, data rates, antenna degree 90o and 180o, and antenna ports.
The worst case was found when positioned as the table below. Following channel(s) was (were) selected for
the final test as listed below:

Band ERP Radiated Emission

WCDMA 90o 90o

WCDMA
EUT
Configure Test Item Available Channel Tested Channel Mode
Mode
- ERP 4132 to 4233 4132, 4182, 4233 WCDMA
- Radiated Emission 4132 to 4233 4132, 4182, 4233 WCDMA

Test Condition:
Test Item Environmental Conditions Input Power Tested By
ERP 25 deg. C, 65 % RH 3.8 Vdc Charles Hsiao
Radiated Emission 25 deg. C, 65 % RH 120 Vac, 60 Hz Charles Hsiao

3.4 EUT Operating Conditions

The EUT makes a call to the communication simulator. The communication simulator station system controlled
a EUT to export maximum output power under transmission mode and specific channel frequency.

3.5 General Description of Applied Standards

The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the
requirements of the following standards:

FCC 47 CFR Part 2

FCC 47 CFR Part 22
KDB 971168 D01 Power Meas License Digital Systems v03r01
ANSI/TIA/EIA-603-E 2016
ANSI 63.26-2015

Note: All test items have been performed and recorded as per the above standards.

Report No.: RF190514C12 Page No. 9 / 22 Report Format Version: 6.1.1

4 Test Types and Results
4.1 Output Power Measurement
4.1.1 Limits of Output Power Measurement

Mobile / Portable station are limited to 7 watts e.r.p.

4.1.2 Test Procedures

EIRP / ERP Measurement:

a. All measurements were done at low, middle and high operational frequency range. RBW and VBW is 5
MHz for WCDMA mode.
b. Substitution method is used for E.I.R.P measurement. In the semi-anechoic chamber, EUT placed on the
0.8 m (below or equal 1 GHz) and/or 1.5 m (above 1 GHz) height of Turn Table, rotated the table around
360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and
horizontal polarization and moved height from 1 m to 4 m to find the maximum polar radiated power. The
“Read Value” is the spectrum reading the maximum power value.
c. The substitution horn antenna is substituted for EUT at the same position and signals generator export the
CW signal to the substitution antenna via a tx cable. Rotated the Turn Table and moved receiving antenna
to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading
equal to “Read Value” of step b. Record the power level of S.G.
d. EIRP = Output power level of S.G – TX cable loss + Antenna gain of substitution horn. E.R.P power can
be calculated form E.I.R.P power by subtracting the gain of dipole, E.R.P power = E.I.R.P power - 2.15 dB.

Conducted Power Measurement:

The EUT was set up for the maximum power with WCDMA link data modulation and link up with simulator. Set
the EUT to transmit under low, middle and high channel and record the power level shown on simulator.

Report No.: RF190514C12 Page No. 10 / 22 Report Format Version: 6.1.1

4.1.3 Test Setup

EIRP / ERP Measurement:

<Radiated Emission below or equal 1 GHz>

Ant. Tower
1-4m
Variable
3 m
10m
EUT&
Support Units

Turn Table

80cm

Ground Plane

Test Receiver

<Radiated Emission above 1 GHz>

Ant. Tower 1-4 m

Variable
EUT& 3m
Support Units

Turn Table
Absorber

150 cm

Ground Plane
Test Receiver

For the actual test configuration, please refer to the attached file (Test Setup Photo).

Conducted Power Measurement:

Communication
Simulator EUT

Report No.: RF190514C12 Page No. 11 / 22 Report Format Version: 6.1.1

4.1.4 Test Results
ERP Power (dBm)
WCDMA
Frequency Reading Correction Polarization
Plane Channel ERP (dBm) ERP (mW)
(MHz) (dBm) Factor (dB) (H/V)
4132 826.4 -10.12 31.208 18.94 78.31
4182 836.4 -10.06 31.3 19.09 81.10 H
4233 846.6 -10.04 31.222 19.03 80.02
90O
4132 826.4 -13.22 31.504 16.13 41.06
4182 836.4 -12.70 31.117 16.27 42.34 V
4233 846.6 -13.59 31.922 16.18 41.51
Note: ERP (dBm) = Reading (dBm) + Correction Factor (dB) – 2.15

Report No.: RF190514C12 Page No. 12 / 22 Report Format Version: 6.1.1

4.2 Radiated Emission Measurement
4.2.1 Limits of Radiated Emission Measurement

The power of any emission outside of the authorized operating frequency ranges must be attenuated below
the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The emission limit is equal to -13 dBm.

4.2.2 Test Procedure

a. Substitution method is used for E.I.R.P measurement. In the semi-anechoic chamber, EUT placed on the
0.8 m (below or equal 1 GHz) and/or 1.5 m (above 1 GHz) height of Turn Table, rotated the table around
360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and
horizontal polarization and moved height from 1 m to 4 m to find the maximum polar radiated power. The
“Read Value” is the spectrum reading the maximum power value.
b. The substitution horn antenna is substituted for EUT at the same position and signals generator export the
CW signal to the substitution antenna via a TX cable. Rotated the Turn Table and moved receiving antenna
to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading
equal to “Read Value” of step a. Record the power level of S.G
c. EIRP = Output power level of S.G – TX cable loss + Antenna gain of substitution horn.
d. E.R.P power can be calculated form E.I.R.P power by subtracting the gain of dipole, E.R.P power = E.I.R.P
power - 2.15 dB.

NOTE: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1 MHz/3 MHz.

4.2.3 Deviation from Test Standard

No deviation.

Report No.: RF190514C12 Page No. 13 / 22 Report Format Version: 6.1.1

4.2.4 Test Setup
<Radiated Emission below or equal 1 GHz>

Ant. Tower
1-4m
Variable
310m
m
EUT&
Support Units

Turn Table

80cm

Ground Plane

Test Receiver

<Radiated Emission above 1 GHz>

Ant. Tower 1-4 m

Variable
EUT& 3m
Support Units

Turn Table
Absorber

150 cm

Ground Plane
Test Receiver

For the actual test configuration, please refer to the attached file (Test Setup Photo).

Report No.: RF190514C12 Page No. 14 / 22 Report Format Version: 6.1.1

4.2.5 Test Results

WCDMA:
Low Channel

Report No.: RF190514C12 Page No. 15 / 22 Report Format Version: 6.1.1

Report No.: RF190514C12 Page No. 16 / 22 Report Format Version: 6.1.1
Middle Channel

Report No.: RF190514C12 Page No. 17 / 22 Report Format Version: 6.1.1

Report No.: RF190514C12 Page No. 18 / 22 Report Format Version: 6.1.1
High Channel

Report No.: RF190514C12 Page No. 19 / 22 Report Format Version: 6.1.1

Report No.: RF190514C12 Page No. 20 / 22 Report Format Version: 6.1.1
5 Pictures of Test Arrangements

Please refer to the attached file (Test Setup Photo).

Report No.: RF190514C12 Page No. 21 / 22 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories

We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to
provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC
recognized accredited test firms and accredited according to ISO/IEC 17025.

If you have any comments, please feel free to contact us at the following:

Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab

Tel: 886-2-26052180 Tel: 886-3-6668565
Fax: 886-2-26051924 Fax: 886-3-6668323

Hwa Ya EMC/RF/Safety Lab

Tel: 886-3-3183232
Fax: 886-3-3270892

Email: [email protected]
Web Site: www.bureauveritas-adt.com

The address and road map of all our labs can be found in our web site also.

--- END ---

Report No.: RF190514C12 Page No. 22 / 22 Report Format Version: 6.1.1