• Biotechnology is the technique of using live organisms or Biotechnology deals with:

their enzymes for products & processes useful to humans. - Microbe-mediated processes (making curd, bread, wine etc).
• The European Federation of Biotechnology (EFB) - In vitro fertilization (test-tube baby programme).
defines Biotechnology as ‘the integration of natural - Synthesis and using of a gene.
science and organisms, cells, parts thereof, and molecular - Preparation of DNA vaccine.
analogues for products and services’. - Correcting a defective gene.

PRINCIPLES OF BIOTECHNOLOGY
Core techniques of modern biotechnology genes. Genetic engineering helps to isolate and introduce
only desirable genes into the target organism.
• Genetic engineering: The technique in which genetic
b) Introduction of the identified DNA into the host: A
material (DNA & RNA) is chemically altered and
piece of DNA cannot multiply itself in the progeny cells
introduced into host organisms to change the phenotype.
of the organism. So, it is integrated into the recipient
• Maintenance of sterile ambience: It is necessary in
genome. It multiplies and inherits along with host DNA.
chemical engineering processes for growing the desired
c) Maintenance of introduced DNA in the host and
microbe/eukaryotic cell in large quantities for the
transfer of the DNA to its progeny.
manufacture of antibiotics, vaccines, enzymes etc.
First recombinant DNA was emerged by linking a gene of
Basic steps in genetically modifying an organism antibiotic resistance with a native plasmid of Salmonella
a) Identification of DNA with desirable genes: Traditional typhimurium.
hybridisation techniques lead to inclusion and Stanley Cohen & Herbert Boyer (1972) isolated antibiotic
multiplication of undesirable genes along with desired resistance gene by cutting out a DNA piece from a plasmid.

TOOLS OF RECOMBINANT DNA TECHNOLOGY

1. Restriction Enzymes (‘molecular scissors’) sequence of base pairs that read the same on the two
strands in 5' → 3' direction and in 3' → 5' direction. E.g.
- These are the enzymes which cut DNA at specific sites into
5' —— GAATTC —— 3'
fragments.
3' —— CTTAAG —— 5'
- They belong to a class of enzymes called nucleases.
- In 1963, two enzymes responsible for restricting growth of
bacteriophage in E. coli were isolated. One enzyme added
methyl groups to DNA. The other (restriction
endonuclease) cut DNA.
- More than 900 restriction enzymes have been isolated
from over 230 strains of bacteria.
Naming of the restriction enzymes:
- First letter indicates genus and the second two letters
indicate species of the prokaryotic cell from which they
were isolated.
E.g. EcoRI comes from E. coli RY 13 (R = the strain.
Roman numbers = the order in which the enzymes were
isolated from that strain of bacteria).
Steps in formation of recomb inant DNA b y action of restriction
Types of Restriction enzymes: endonuclease enzyme - EcoRI
• Exonucleases: They remove nucleotides from the ends of
- Restriction enzymes cut the strand a little away from the
the DNA. centre of the palindrome sites, but between the same two
• Endonucleases: bases on the opposite strands. This leaves single stranded
- They cut at specific positions within the DNA. overhanging stretches at the ends. They are called sticky
- They bind to specific recognition sequence of the DNA and ends. They form H-bonds with their complementary cut
cut the two strands at specific points. counterparts. This stickiness facilitates action of the
- The first restriction endonuclease is Hind II. It cuts DNA enzyme DNA ligase.
molecules by recognizing a specific sequence of 6 base - When cut by the same restriction enzyme, the resultant
pairs. This is called the recognition sequence for Hind II. DNA fragments have the same kind of sticky-ends and
- Restriction endonuclease recognizes a specific these are joined together by DNA ligases.
palindromic nucleotide sequences in the DNA. It is a

1
 - Transformation is a procedure in which a piece of DNA
is introduced in a host bacterium.
- Selectable markers of E. coli include the genes encoding
resistance to antibiotics like ampicillin, chloramphenicol,
tetracycline, kanamycin etc. Normal E. coli cells have no
resistance against these antibiotics.
c. Cloning sites:
- To link the alien DNA, the vector needs a single or very
few recognition sites for restriction enzymes.
- More than one recognition sites generate several
fragments. It complicates the gene cloning.
- Ligation of alien DNA is carried out at a restriction site
present in one of the two antibiotic resistance genes. E.g.
ligation of foreign DNA at Bam H I site of tetracycline
resistance gene in vector pBR322.
• Restriction sites: Hind III,
EcoR I, BamH I, Sal I, Pvu
II, Pst I, Cla I.
Separation and isolation of DNA fragments: • ori
- DNA fragments are separated by a technique called gel • Antibiotic resistance
genes: ampR and tetR.
electrophoresis.
• Rop: codes for the proteins
involved in the replication
of plasmid.

- The recombinant plasmids lose tetracycline resistance

due to insertion of foreign DNA. But they can be selected
out from non-recombinant ones by plating transformants
- To visualize the DNA fragments as bright orange coloured on ampicillin containing medium.
bands, they are stained with ethidium bromide and - Then the transformants are transferred on tetracycline
exposed to UV radiation. medium. The recombinants grow in ampicillin medium but
- DNA bands are cut out from agarose gel. This is called not on tetracycline medium. But, non-recombinants grow
elution. These purified DNA are used to construct on the medium containing both the antibiotics.
recombinant DNA by joining them with cloning vectors. - In this case, one antibiotic resistance gene helps to select
2. Cloning Vectors the transformants. The other antibiotic resistance gene is
inactivated due to insertion of alien DNA, and helps in
- They are the DNA molecules that can carry a foreign DNA
selection of recombinants.
segment and replicate inside the host cells.
- Selection of recombinants due to inactivation of antibiotics
E.g. Plasmids (circular extra-chromosomal DNA of
bacteria) and bacteriophages. requires simultaneous plating on 2 plates having different
- Bacteriophages (high number per cell) have very high copy antibiotics. Therefore, alternative selectable markers have
developed to differentiate recombinants from non-
numbers of their genome within the bacterial cells. Some
recombinants based on their ability to produce colour in the
plasmids have only 1-2 copies per cell. Others may have
presence of a chromogenic substrate.
15-100 copies per cell.
- When the cloning vectors are multiplied in the host, the - A recombinant DNA is inserted within the coding
linked piece of DNA is also multiplied to the numbers sequence of an enzyme,  -galactosidase. So, the enzyme
equal to the copy number of the vectors. is inactivated. It is called insertional inactivation. Such
colonies do not produce any colour. These are identified as
Features required for cloning into a vector
recombinant colonies.
a. Origin of replication (ori): - If the plasmid in bacteria have no an insert, it gives blue
- This is a sequence where replication starts. coloured colonies in presence of chromogenic substrate.
- A piece of DNA linked to ori can replicate within the host
d. Vectors for cloning genes in plants & animals: Genetic
cells. This also controls the copy number of linked DNA.
tools of some pathogens can be transformed into useful
So, for getting many copies of the target DNA, it should be
vectors for delivering genes to plants & animals. E.g.
cloned in a vector whose origin support high copy number.
• Agrobacterium tumifaciens (a pathogen of many dicot
b. Selectable marker (marker gene): plants) can deliver a piece of DNA (T-DNA) to
- It is a gene that helps to select the transformants and
eliminate the non-transformants.
2
 transform normal plant cells into a tumor. These tumor - To avoid this problem, bacterial cells are treated with a
cells produce the chemicals required by the pathogen. specific concentration of a divalent cation (e.g. calcium).
The tumor inducing (Ti) plasmid of A. tumifaciens is So, DNA enters the bacterium through pores in cell wall.
modified into a cloning vector which is not pathogenic - Such cells are incubated with recombinant DNA on ice.
to the plants but is able to use the mechanisms to deliver Then they are placed briefly at 420 C (heat shock) and put
genes of interest into plants. them back on ice. This enables the bacteria to take up the
• Retroviruses in animals can transform normal cells into recombinant DNA.
cancerous cells. So, they are used to deliver desirable Other methods to introduce alien DNA into host cells
genes into animal cells. • Micro-injection: In this, recombinant DNA is directly
3. Competent Host (For Transformation with injected into the nucleus of an animal cell.
Recombinant DNA) • Biolistics (gene gun): In this, cells are bombarded with
high velocity micro-particles of gold or tungsten coated
- DNA is a hydrophilic molecule. So, it cannot pass through
with DNA. This method is suitable for plants.
cell membranes.
• ‘Disarmed pathogen’ vectors: When it infects the cell,
transfer the recombinant DNA into the host.

PROCESSES OF RECOMBINANT DNA TECHNOLOGY

1. Isolation of the Genetic Material (DNA)
- The bacterial cells/plant or animal tissue are treated with
enzymes like lysozyme (bacteria), cellulase (plants),
chitinase (fungus) etc. The cell is broken releasing DNA
& other macromolecules (RNA, proteins, polysaccharides
and lipids).
- Genes (DNA) are interwined with proteins such as
histones. RNA is removed by treating with ribonuclease.
Proteins are removed by treatment with protease. Other
molecules are removed by appropriate treatments.
- When chilled ethanol is added purified DNA precipitates
out as a collection of fine threads in the suspension.
2. Cutting of DNA at Specific Locations
- Purified DNA is incubated with the restriction enzyme at
optimal conditions. As a result, DNA digests. - For amplification a thermostable DNA polymerase
- Agarose gel electrophoresis is employed to check the (isolated from a bacterium, Thermus aquaticus) is used. It
progression of a restriction enzyme digestion. DNA is remains active in high temperature during the denaturation
negatively charged. So it moves towards the anode. The of double stranded DNA.
DNA fragments separate according to their size through - The amplified fragment can be used to ligate with a vector
sieving effect of the agarose gel (a polymer extracted from for further cloning.
sea weeds). The smaller sized fragment moves farther. The
4. Insertion of Recombinant DNA into Host Cell
process is repeated with the vector DNA also.
- After cutting the source DNA and vector DNA, the cut out - Using any methods, the ligated DNA is introduced into
gene of interest from source DNA and cut vector are recipient cells. They take up DNA from its surrounding.
mixed and ligase is added. It creates recombinant DNA. - If a recombinant DNA bearing ampicillin resistant gene
is transferred into E. coli cells, the host cells become
3. Amplification of Gene of Interest using PCR
ampicillin-resistant cells.
- Polymerase Chain Reaction (PCR) is the synthesis of - If the transformed cells are spread on agar plates
multiple copies of the gene of interest in vitro using 2 sets containing ampicillin, only transformants will grow.
of primers & the enzyme DNA polymerase. Untransformed recipient cells will die.
- Primers are small chemically synthesized oligonucleotides
5. Obtaining the Foreign Gene Product
that are complementary to the regions of DNA.
- The enzyme extends the primers using the nucleotides and - The aim of recombinant DNA technology is to produce a
the genomic DNA (template). Through continuous DNA desirable protein. The foreign gene gets expressed under
replication, the DNA segment is amplified up to 1 billion appropriate conditions.
copies. - If a protein encoding gene is expressed in a heterologous
host, it is called a recombinant protein.

3
- The cells with foreign genes can be grown in laboratory.
The cultures are used to extract the desired protein and
purify it by using separation techniques.
- The cells can also be multiplied in a continuous culture
system. Here, the used medium is drained out from one
side while fresh medium is added from the other. It
maintains the cells more physiologically active and so
produces a larger biomass. It yields more desired protein.
Bioreactors
It is usually cylindrical or with a curved base to facilitate
- These are the vessels in which raw materials are the mixing of the reactor contents. The stirrer facilitates
biologically converted into specific products, enzymes even mixing and oxygen availability. Alternatively, air can
etc., using microbial plant, animal or human cells. be bubbled through the reactor. The bioreactor has
- Bioreactors are used to produce large quantities of • An agitator system
products. They can process 100-1000 litres of culture. • An oxygen delivery system
- A bioreactor provides the optimal growth conditions • A foam control system
(temperature, pH, substrate, salts, vitamins, oxygen) for • A temperature control system
achieving the desired product. • pH control system
- The most commonly used bioreactors are of stirring type • Sampling ports (for periodic withdrawal of the culture).
(stirred-tank reactor).
6. Downstream Processing
- It is a series of processes such as separation and
purification of products after the biosynthetic stage.
- The product is formulated with suitable preservatives.
Such formulation undergoes thorough clinical trials and
strict quality control testing.