GRUNDFOS DATA BOOKLET

CRN120-7 A-F-G-E-HBQE 3x400/690 50 HZ

Grundfos pump 95922189

Thank you for your interest in our products. Please contact us for more information, or visit our website

https://www.lenntech.com/grundfos/CRN120/95922189/CRN-120-7-A-F-G-E-HBQE.html

[email protected]
tel. +31 152 610 900
fax. +31 152 616 289

BE > THINK > INNOVATE

 Position Qty. Description
1 CRN 120-7 A-F-A-E-HBQE

Product No.: On request

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump
materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high
reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling.
Pipe connection is via DIN flanges.

The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product details

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical field
around the products ensures deposition of paint particles as a thin, well-controlled layer on the surface.
An integral part of the process is a pretreatment. The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.

Pump
A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means of
two coupling guards. The long coupling makes it possible to replace the shaft seal without removing the
motor from the pump.

The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming plug
and vent screw.

The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
• Rotating seal ring material: carbon graphite, resin-impregnated
• Stationary seat material: silicon carbide (SiC)
This material pairing has a very good corrosion resistance and is especially suitable for water up to 90
°C. The seal life will be reduced significantly at temperatures above 90 °C. The material pairing is not
recommended for liquids containing particles as this will result in heavy wear on the SiC face.

Printed from Grundfos Product Centre [2018.06.003] 1/12

 Position Qty. Description
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is retained in the pump head by a cover and screws. It can be replaced without removing
the motor.

The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surfaces, and
the shape of the blades ensure a high efficiency.

The pump has a stainless-steel base mounted on a separate base plate. The base and base plate are
kept in position by the tension of the staybolts which hold the pump together. Both the inlet and the
outlet side of the base have two pressure gauge tappings. The pump is secured to the foundation by
four bolts through the base plate. The flanges are fastened to the base by means of locking rings.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.
The motor is flange-mounted with free-hole flange (FF).
Motor-mounting designation in accordance with IEC 60034-7: IM B 5 (Code I) / IM 3001 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.
The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled
conditions.
Thermal switches must be connected to an external control circuit in a way which ensures that the
automatic reset cannot cause accidents. The motors must be connected to a motor-protective circuit
breaker according to local regulations.
A variable speed drive makes adjustment of pump performance to any duty point possible. If the motor
is to be connected to a variable speed drive, the pump must be ordered with an electrically insulated
motor bearing.

Technical data

Controls:
Frequency converter: NONE

Liquid:
Pumped liquid: Water
Liquid temperature range: 0 .. 120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³

Technical:
Rated flow: 120 m³/h
Rated head: 163.2 m

Printed from Grundfos Product Centre [2018.06.003] 2/12

 Position Qty. Description
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HBQE
Approvals on nameplate: CE, EAC,ACS
Curve tolerance: ISO9906:2012 3B

Materials:
Base: Stainless steel
EN 1.4408
AISI 316
Impeller: Stainless steel
EN 1.4401
AISI 316
Bearing: SIC
Support bearing: Graflon

Installation:
Maximum ambient temperature: 55 °C
Maximum operating pressure: 30 bar
Max pressure at stated temp: 30 bar / 120 °C
30 bar / 0 °C
Type of connection: DIN
Size of inlet connection: DN 125
Size of outlet connection: DN 125
Pressure rating for pipe connection: PN 40
Flange size for motor: FF500

Electrical data:
Motor standard: IEC
Motor type: SIEMENS
IE Efficiency class: IE3
Rated power - P2: 75 kW
Power (P2) required by pump: 75 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 135-122/78,0-70,0 A
Starting current: 680-680 %
Cos phi - power factor: 0.89
Rated speed: 2975 rpm
Efficiency: IE3 94,7%
Motor efficiency at full load: 94.7-94.7 %
Motor efficiency at 3/4 load: 94.8-94.8 %
Motor efficiency at 1/2 load: 94.1-94.1 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F

Others:
Minimum efficiency index, MEI ≥: 0.7
Net weight: 760 kg
Gross weight: 924 kg
Shipping volume: 2.25 m³

Printed from Grundfos Product Centre [2018.06.003] 3/12

 On request CRN 120-7 A-F-A-E-HBQE 50 Hz
H CRN 120-7, 3*400 V, 50Hz eta
[m] [%]

240

220

200 100

180 90

160 80

140 70

120 60

100 50

80 40

60 30

40 20

20 10

0 0
0 20 40 60 80 100 120 140 160 Q [m³/h]
P NPSH
[kW] [m]
80 P1 40

P2
70 35

60 30

50 25

40 20

30 15

20 10

10 5

0 0

Printed from Grundfos Product Centre [2018.06.003] 4/12

 H CRN 120-7, 3*400 V, 50Hz eta
Description Value [m] [%]
General information:
Product name: CRN 120-7 A-F-A-E-HBQE 240
Product No: On request
220
EAN number: On request
Technical: 200 100

Rated flow: 120 m³/h 180 90

Rated head: 163.2 m
160 80
Stages: 7
Impellers: 7 140 70

Number of reduced-diameter 0 120 60

impellers:
Low NPSH: N 100 50
Pump orientation: Vertical
80 40
Shaft seal arrangement: Single
Code for shaft seal: HBQE 60 30
Approvals on nameplate: CE, EAC,ACS
40 20
Curve tolerance: ISO9906:2012 3B
Pump version: A 20 10

Model: A 0 0
Materials: 0 20 40 60 80 100 120 140 Q [m³/h]
P NPSH
Base: Stainless steel [kW] [m]
P1
EN 1.4408
70 P2 35
AISI 316
Impeller: Stainless steel 60 30

EN 1.4401 50 25
AISI 316 40 20
Material code: A 30 15
Code for rubber: E
20 10
Bearing: SIC
10 5
Support bearing: Graflon
Installation: 0 0

Maximum ambient temperature: 55 °C 18

x
4

100
275

4 X G 1/2

28
x
8

G 1/2 550

551

433
344
472
380

Maximum operating pressure: 30 bar 433

Max pressure at stated temp: 30 bar / 120 °C 551

30 bar / 0 °C
Type of connection: DIN
820

Size of inlet connection: DN 125

Size of outlet connection: DN 125
Pressure rating for pipe connection: PN 40 550
G 1/2 G 1/2
Flange size for motor: FF500
Connect code: F
8 x 28
1797

Liquid: 4 X G 1/2

Pumped liquid: Water

220
270

Liquid temperature range: 0 .. 120 °C

43
180

Liquid temperature during operation: 20 °C

275 100
Density: 998.2 kg/m³ 344 380
4 x 18
380 472
Electrical data:
Motor standard: IEC
Motor type: SIEMENS
IE Efficiency class: IE3
Rated power - P2: 75 kW
Power (P2) required by pump: 75 kW +T +T +T

Mains frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 135-122/78,0-70,0 A
CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY
IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE

Starting current: 680-680 % TO AMPLIFIER

RELAY
L1 L2 L3
Cos phi - power factor: 0.89
THERMISTORS PTC ACCORDING TO DIN 44082

Rated speed: 2975 rpm

Efficiency: IE3 94,7%
+T +T +T
Motor efficiency at full load: 94.7-94.7 %
Motor efficiency at 3/4 load: 94.8-94.8 %
Motor efficiency at 1/2 load: 94.1-94.1 %
Number of poles: 2 TO AMPLIFIER
RELAY

Enclosure class (IEC 34-5): 55 Dust/Jetting L1 L2 L3

Printed from Grundfos Product Centre [2018.06.003] 5/12

 Description Value
Insulation class (IEC 85): F
Motor protec: PTC
Motor No: 81U15340
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.7
Net weight: 760 kg
Gross weight: 924 kg
Shipping volume: 2.25 m³

Printed from Grundfos Product Centre [2018.06.003] 6/12