Scribd
Upload
12 views

DTC Check - Clear

The document provides instructions for checking and clearing diagnostic trouble codes (DTCs) from the transponder key ECU assembly and engine control module (ECM) on a vehicle theft deterrent and keyless entry immobiliser system without an entry and start system. It lists the steps to access and check for DTCs in each module and then clear any DTCs that are found.

Uploaded by

Fabian Henniker
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

DTC Check - Clear

The document provides instructions for checking and clearing diagnostic trouble codes (DTCs) from the transponder key ECU assembly and engine control module (ECM) on a vehicle theft deterrent and keyless entry immobiliser system without an entry and start system. It lists the steps to access and check for DTCs in each module and then clear any DTCs that are found.

Uploaded by

Fabian Henniker
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

12/3/17, 12(52 am

THEFT DETERRENT / KEYLESS ENTRY IMMOBILISER SYSTEM(w/o Entry and Start System) DTC CHECK /
CLEAR

CHECK FOR TRANSPONDER KEY ECU ASSEMBLY DTC

a. Connect the GTS to the DLC3.

b. Turn the ignition switch to ON.

c. Turn the GTS on.

d. Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.


Body Electrical > Immobiliser > Trouble Codes

Execute

e. Check for DTCs.

CHECK FOR ECM DTC

a. Connect the GTS to the DLC3.

b. Turn the ignition switch to ON.

c. Turn the GTS on.

d. Enter the following menus: Powertrain / Engine / Trouble Codes.


Powertrain > Engine > Trouble Codes

Execute

e. Check for DTCs.

CLEAR TRANSPONDER KEY ECU ASSEMBLY DTC

a. Connect the GTS to the DLC3.

b. Turn the ignition switch to ON.

c. Turn the GTS on.

d. Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.


Body Electrical > Immobiliser > Clear DTCs

Execute

e. Clear the DTCs.

CLEAR ECM DTC

a. Connect the GTS to the DLC3.

https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000TF7L.html Page 1 of 2
12/3/17, 12(52 am

b. Turn the ignition switch to ON.

c. Turn the GTS on.

d. Enter the following menus: Powertrain / Engine / Trouble Codes.


Powertrain > Engine > Clear DTCs

Execute

e. Clear the DTCs.

https://toyotamanuals.com.au/docs/hilux-service-repair-manual-jul-15-current/N00148/manual/repair/contents/RM100000000TF7L.html Page 2 of 2

You might also like