DesignFit Engineering Ltd.

Specialists in façade design

www.designfit.eu
 1 2 3 4 5 6 7 8 9 10 11 12

C D
Tenant Signage -
-
3891 O/All S/O Width
G G
A 10 Tol. 3871 Frame Width 10 Tol. A

42 Tol.
50 CL 1246 CL 1246 CL 110 CL 1169 CL 50 15642 U/S of Steel
15635 U/S of Brick 15635 U/S of Brick
15642 U/S of Steel 15642 U/S of Steel
15575 Transom 15575 Transom
CL CL
42 Tol.

42 Tol.
01 L1 02 03 OPP. 01

340

340

340
B D052 D056 D056 D052 B
- - 15235 Transom 15235 Transom
110 CL CL

110

110
15125 Transom 15125 Transom
CL CL
B
G1 G1 02 B

D001 G3 02
717 Grid to Back of Mullion 717 Grid to Back of Mullion
D002

OPP. 327 O/A Glazing 327 O/A Glazing

2925 Mullion Height

2925 Mullion Height

2925 Mullion Height

01

2283 Door Frame Height

3142 S/O Height

3142 S/O Height

3142 S/O Height

D053
2140

2140
OPP.
01 02
C DETAIL -B 02 C
D051 D051
D053

A A
- -

900
01
D001 DETAIL -A 01
D002 12985 Transom
12925 Top of Brick CL
310 Ext.

310 Ext.
D D
12830 FFL 12830 FFL
12925 Top of Brick
425

330
12500 Top of Concrete 12500 Top of Concrete 12500 Top of Concrete
850 Clear Openng
C
175 Tol.

175 Tol.

175 Tol.
125mm SFS Infill
-
10 Tol. 2592 Frame Width 1269 Frame Width Between Mullions, CP
10 Tol. 10 Tol. Board (12mm) To Run Section View-C Section View-D
2602 S/O Width 1289 S/O Width In Front Of Mullions
E E
327 O/A Glazing

D 18
- PPC Interpon RAL 9005
Aluminium Cover flashing 03 10/05/19 Handle & Threshold Revised KK SP
1145 Door Frame Width
Glass Cut line for fixing
52
handle PPC Interpon RAL 9005 02 14/01/19 Issued For Construction KK SP
Open-In Aluminium Cover flashing

110
50
Back of Mullion

Glass Cut line for Cylinder 01 01/11/18 Issued For Construction KK SP

Door glass bonded to
717 Grid to

40
70 Alum frame
F F

40
30
00 19/09/18 First Issue KK SP
50 1246 1246 110 1169 50 Pull handle
52 Door frame Rev Date Description Drawn Checked
CL CL CL CL CL
G Door frame Door glass bonded to Status:
10 Tol. 2592 Frame Width 1269 Frame Width
DETAIL -A DETAIL -B Alum frame For Construction
2602 S/O Width 10 Tol. 1289 S/O Width 10 Tol.
327 O/A Glazing

3891 O/All S/O Width

18
Plan View A
G G
Door Hardware As Per
MOCK-MAT-002.
Access Controls By Others Project:
Back of Mullion
717 Grid to

Title:

50 1246 1246 110 1169 50 Ground Floor Elevation-003

CL CL CL CL CL Ref. Qty.
G Drawn: Checked: Scale @ A1: Approved:
H
10 Tol. 3871 Frame Width 10 Tol. EG00.E2.01 1 KK SP
1:15
H

Date: Date: Date:

19/09/18 19/09/18
3891 O/All S/O Width Drawing No.: Revision:

Plan View B E003 03

1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

Internal Finishes by Others

Fire Stop (By Other)
Additional 80x60x6mm Steel Angle
Fixed to Primary Steel with 2No-M10-A2/70 GL Sealant Joint & Backer Rod
Tapped Bolt @100 C/C (By Others)
A A

EPDM Trapped Between Angle & 2mm THK PPC Alum. Flashing.
Flat @ Top Of Transom RAL To Match External Finish
2No-SFS SD14-T15-5.5xL Self
External Seal (By Others)
Drilling SCrew @100 C/C 10
6mm thk Aluminium Baseplate
(Grade 5083-0/H111) Refer to Elevation for U/S of Steel Level

7
Insulate Cavity With Loose Fill Refer to Elevation for U/S of Brick Level

42 Tol.
Mineral Wool. (Min. 60kg/m3)

10
B B

25
2mm THK. Bent Angle

67

75

S/O Height
Refer to Elevation for Transom

12~15

Mullion Height
Alum. Transom 322430
60

C AVS 34 Louvre System C

340
RAL To Match Curtain Wall Tenant Signage
Loose Fill Mineral Wool Grid to Back of Mullion Dimension 12~15mm "Shadow Gap"
Vertical Section at Head
02 Scale 1:2.5
(Min. 60kg/m3) By X. 2mm Signage to visually "FLOAT" within
Aluminium Backing Panel By Others 36 frame with ~12 to 15mm shadow
gap as indicated

12~15
Refer to Elevation for Transom

75

10
D D

110
Alum. Transom 322430
Horizontal Alum. Capping

75
Refer to Elevation for Transom
Alum. Pressure Plate 477600
2x2mm Alum. Sandwich Panel
RAL 9005 Black 6 35.5 5
35.5 mm DGU
131 46 150
Alum. Mullion 322290
E
327 O/A Glazing Vertical Alum. Capping E

Sealant Joint & Backer Rod 03 10/05/19 Tenants Signage Information Added KK SP

Refer to Elevation for Transom

02 14/01/19 Issued For Construction KK SP
Insulate Cavity With Loose Fill Refer to Elevation for Top of Brickwork Level

50
10
Mineral Wool. (Min. 60kg/m3) 01 01/11/18 Issued For Construction KK SP

10 EPDM Trapped Between Angle and Flat At

F
125mm SFS Track System 00 19/09/18 First Issue KK SP F
Underside of Transom, and Bonded to Face of
Upstand to Manufactures Recommendations. Rev Date Description Drawn Checked

Status:
Internal Finishes by Others
For Construction

Mullion Height

S/O Height
Refer to Elevation for 129 SFS Framing Zone
For Ext. Refer
to elevation

FFL Level

300mm Long Alum. Spigot fixed to Cavity Insulation If Required

G Base plate by 4mm F.P.F.W (By Others) G

Vertical Section at SIll 1No.-M12-A2/70-Bolt

01 12mm CP Board
Scale 1:2.5
Project:
VCL Layer (By Other)
50

Bitumen Tanking Membrane

(By Others) Title:

Typical Vertical Section Details

Refer to Elevation for
Top of Concrete Level
Drawn: Checked: Scale @ A1: Approved:
H H
KK SP
2Nos.-M10/10 Steel Fischer FAZ II Date: Date:
1:2.5 Date:
30 110 19/09/18 19/09/18
A4 Anchor @100mm c/c 6mm thk Aluminium Baseplate Drawing No.: Revision:
(Minimum Embedment-40mm) (Grade 5083-0/H111)
270
D001 02
1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

A A

240
Internal Finishes 35 150 2Nos.-M10/10 Steel Fischer FAZ II
(By Others) 25 100 25 A4 Anchor @100mm c/c 50 140 50 6mm thk Aluminium Baseplate
(Minimum Embedment-40mm) (Grade 5083-0/H111)

30

30
B B
6mm thk Aluminium Baseplate
Alum. Mullion 322290 (Grade 5083-0/H111)
2Nos.-M10/10 Steel Fischer FAZ II
110
300mm Long Alum. Spigot fixed to A4 Anchor @100mm c/c
Item No. 397850
Base plate by 4mm F.P.F.W (Minimum Embedment-40mm)
134 50 60 50
50 134 Item No. 240100

270

270
Item No. 397850
Insulate cavity with
loose fill Mineral Wool. 1 5 1
(Min. 60kg/m3) 1 5 1 22 73 33
C 33 73 22 Alum. Mullion 322290 C

111
EPDM Trapped Between Angle

125
Grid to Back of Mullion Dimension

Grid to Back of Mullion Dimension

111
& Flat @ Side Of Mullion 300mm Long Alum. Spigot fixed to
Base plate by 4mm F.P.F.W
Packer

327 O/A Glazing

327 O/A Glazing

48.5

48.5

35.5 12
Sealant Joint &

47
Backer Rod

82

82
33.5

33.5
2mm THK PPC Alum. Flashing.

155
75 51 5 35.5 mm DGU
D RAL To Match External Finish 6 51 75 10 75 D
134

134
8 Item No. 239588 33.5 mm DGU 8 Vertical Alum. Capping
Vertical Alum. Capping Item No. 397710
Item No. 397710 Threshold Plate Fixing
Threshold Plate Fixing
Concealed by Capping
Concealed by Capping
GL
10

External Seal (By Others) Door Frame Width Horizontal Alum. Capping
Door Frame Width
E E

Mullion CTRS 110 Mullion CTRS 04 21/08/19 Threshold Plate Added KK SP

50 Mullion CTRS

10 Tol. Frame Width 03 10/05/19 Handle Revised KK SP

S/O Width 02 14/01/19 Issued For Construction KK SP

01 01/11/18 Issued For Construction KK SP

Inward Opening Door Plan Detail

F
01 Scale 1:2.5 Inward Opening Door Plan Detail 00 19/09/18 First Issue KK SP F

02 Scale 1:2.5 Rev Date Description Drawn Checked

Status:

For Construction

G G

Project:

Title:

Inward Opening Door Plan Details

Drawn: Checked: Scale @ A1: Approved:

H H
KK SP
Date: Date:
1:2.5 Date:
19/09/18 19/09/18
Drawing No.: Revision:

1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

A A

B B

C C

D D

E E

02 18/12/18 Issued For Construction KK SP

01 19/10/18 Issued For Construction KK SP

F 00 20/09/18 First Issue KK SP F

Rev Date Description Drawn Checked

Status:

For Construction

G G

Project:

Title:

Elevation
Window Type WT1

Drawn: Checked: Scale @ A1: Approved:

H H
KK SP
Date: Date:
1:15 Date:
20/09/18 20/09/18
Drawing No.: Revision:

E101 02
1 2 3 4 5 6 7 8 9 10 11 12
 01 02 03 04
R2 R1 R24 S001 R23 R22 R21 S001 R20 R19 S001 S001 R18 R17
6787 6787 6787 6787 6787 6787 6787 6787 6787

D1
C/C D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1
D6 D5 D5 D4 D3 D2 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C D1 D1
U/S of Insulated Panel Transom C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C Mullion top level Mullion top level Mullion top level Mullion top level Mullion top level C/C C/C
Mullion top level Mullion top level Mullion top level Mullion top level Mullion top level
+99012 +99012

50
+99050 Max. +99000 Max. Mullion top level Mullion top level +98832 +98914 +98975 +99025
Mullion top level +98728 +98975 +98915 +98833
Mullion top level +98461 +98603
Mullion top level +98305
Mullion top level +98136
Mullion top level +97958 01 01
Mullion top level +97773
Mullion top level +97585 D006 D017
Mullion top level +97397
+97212

VARIES
MAXIMUM

C/C
4450
01 02 01 02 01 01
D065 D064 D064 D063 D063 02 02 D052
01
D009 D009
opp opp opp opp opp D005
Transom
+95200 01 01
LEVEL 02 SSL D070 D069
FFL +94600 +94500
SSL
1600

+93391
02
3900
C/C

01 01 01 01
MAX. STRUCTURAL OPENING

SSL +93000 D004

SSL SSL D010 D009 D070 D069
+92369 01 +92400
D009
02
Transom
15050

D051
+91300
4425

01
01 D004
02 01
2700

01
C/C

D062 D062 D051

D050
01 01 01 01
LEVEL 01 Transom D053 D003 D011 D054
SSL SSL
FFL +88575 +88600 +88475
+88375
1875
C/C

01 02 01 01 02 01 02
Transom D024 D055 D056 D014 D055 D014 D051
+86725
4575

01 02 02 01 01 02
02 D068 D068 01 D060 D060 D055 D055 01
D061 D061
D002
2700

01
C/C

01
D051
D055

Handle

Handle
Master Master Master Master

1000

1000
LEVEL 00 Transom Leaf Leaf Leaf Leaf
SSL
25

FFL +84000 +84025

+83800
658 - Clear per leaf 583 - Clear per leaf 583 - Clear per leaf 583 - Clear per leaf
01
1336 - Clear opening Auto Door 1186 - Clear opening 1186 - Clear opening 1186 - Clear opening D001

01 01 01
D023 D013 D013

06 05
R17 R16 R15 S002 R14 S002 R13 R12
6787 6787 6787 6787 6787

D1
C/C
D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D1 D2 D3 D4 D5 D5 D6
U/S of Insulated Panel Transom C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C C/C
Mullion top level Mullion top level Mullion top level

50
+99050 Max. +99000 Max. Mullion top level Mullion top level
+98915 +98833 +98728 Mullion top level
+98604 +98462 Mullion top level
+98305 Mullion top level
+98136 Mullion top level
+97958 Mullion top level Mullion top level
+97773 +97585 Mullion top level
97957 +97397
+97213

VARIES
MAXIMUM

C/C
4450
01 02
D052 D052
01 02 01 01 01
Transom D063 D063 D064 D064 D065
+95200
LEVEL 02 SSL
FFL +94600 +94500

1600
SSL SSL

3900
C/C
MAX. STRUCTURAL OPENING
SSL +93000 +93000 +93000
SSL
+92400
01
15050
Transom D012
+91300
4425

01 02
2700
C/C D051 D050

LEVEL 01 Transom SSL

FFL +88575 +88600 +88682
1875
C/C

01 02 03 02
Transom D014 D016 D058 D015
+86725
4575

01 02 02
D055 D055 D058
01 01
2700
C/C

02 01
SLIDE SLIDE D058 D059
D059 D058 OPP

Handle
Master

1000
LEVEL 00 Transom Leaf SSL
SSL
25

FFL +84000 +84025 +83800

+83800
583 - Clear per leaf 1612
1186 - Clear opening Clear opening
01 3405 01
D016 Door Frame width D015
01
D013

R1 R2
AA BB
R24
R3

R23

CLIENT: DRN BY: AP DATE: October '17

1

*NOTES:
DP

DP
R4

R22
DP

SCALE: 1:200@ A3 C As per comments 19.12.17 R21

2
R5

1. D1,D2,D3,D4,D5,D6 & D7: Please refer to the plan drawings

Checked By: Date: R20 R6
3

C675-P-001 & P-002

B As per comments 01.12.17
4

JOB TITLE: 2. All Dimensions are in millimeter

Drawing Status:
+84.8

For Approval X R19

D C B A
R7

A As per comments 08.11.17 5 3. Distance b/w each grids are linear measurements between the points of
REV
R8

DRG. No.
R18

E001
6

intersection with grid line A

C - First issue
METAL
DOOR
L20/480A

13.10.17
METAL
DOOR
L20/480A
R17
7
R9
4. R - Mullion with reinforcement profile
R16 CURTAIN WALLING
H11:110A

Rev Description Date R10

8

DRG. TITLE: R15

R14 R13
20150

R12
R11

AA
9000

BB

Faceted Screen All Elevations Viewed Externally REVISIONS KEY PLAN

 BRACKET SCHEDULE
Contract Name Area Type No. Rev.

B51
Project Name Delivery Required
3
Originator Design Review By Review Date QS Check By Check Date 4
KK CR 18.01.19
Notes to Manufacturer: Key
ALL brackets MUST be marked with the flashing item code at the highlighted location HH = Hanging Hole MK Part Mark Location
ALL welds to be dressed to a suitable visual finish unless referenced otherwise
DO NOT scale from the schedule
Any doubt regarding the information shown, please seek clarification. DO NOT make assumptions COL Colour Face

Item Code Item Description Reference Drawing No. Tracker No. VO No.
Curtain Wall Sill Bracket
B51

3rd Angle Projection

150

25 100 25
30

30
6mm Thk. Alum. Base Plate
(Grade 5083-0/H111)
160

160
300mm Long Alum.
Spigot Fixed to Base
270

270
Plate by 4mm F.P.F.W

Welded Connection
103

103
7

2 45 103 300 6
306
PLAN VIEW
SIDE VIEW

TYPES REMARKS QUANITY

B51-01 (As Shown) 7
B51-01H (Opp. Hand) 7

Rev Chk'd Rev'd Description

Material/Grade Gauge Girth Bends
ALLOY 5083-O/H 111
Finish/Colour Gloss Level Microns Quantity
Mill As above
 1 2 3 4 5 6 7 8 9 10 11 12

3rd Angle Projection

A A

Finish :-
Denotes visible face PPC RAL 7016 Matt (30% Gloss) *Hanging Hole
to be Painted

B B

CLA01
C C

DIM "A"
17x14x2mm Thk
60mm Long. Galvanized Steel Angle
(Fixed On Site At Approx. 400mm c/c) 37.6 2 End Stop Packer Length 2 End Stop

1.6mm Thick Pre-Coated 80 Appx. 400mm c/c 80

Galvanised Steel Sheet 22 14
D (Finish: Mill) D
1.6

17
* * *
60
15

47

34mm Packer
Non- Combustible A1 Class
E
Packer To Be Bonded in the E

Factory 27

2mm Thick Aluminium Sheet

F Note: Flashing to be fixed to Mullion using CLA01 at approx 400mm centre to centre F
PART NUMBER DIM "A" REMARKS QUANTITY 00 23/08/19 First Issue KK SP

All Welds Dressed Flush Rev Date Description Drawn Checked

JP01 2920 (As Shown) 1 Status:

MANUFACTURE

G G

Project:

Title:

Jamb Pressing Schedule

Drawn: Checked: Scale @ A1: Approved:

H H
KK SP
Date: Date:
1:1 Date:
23/08/19 23/08/19
Drawing No.: Revision:

JP01 00
1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

D D

A A

C-C

B B

D
B

C C

C C

D D

Typical Edge Detail

D Scale: 1:1

E E

F F
00 24/01/19 First Issue KK CR

B D Rev Date Description Drawn Checked

Status:
B-B
MANUFACTURE
Glass Elevation
A Scale: 1:8
SPECIFICATION:
OUTER: 6mm Toughened HST Glass with Sunguard 63 Coating to Face 2 Polished Edge
CAVITY: 18mm Argon Filled cavity, Black Warm Edge Spacer (Swiss Spacer-ultimate)
G INNER: 11.5mm (2x5mm + 1.5mm PVB interlayer) Heat Strengthened Laminated Glass G

Project:

TOUGHENED GLASS:
GLASS PERFORMANCE & TOLERANCE REQUIREMENTS: GENERAL:
Glass for glazing shall comply with the provisions of BS 952: Parts 1 & 2 and BS EN 572 Parts 1 & 2. All toughened glass shall be tempered on a roller hearth furnace eliminating
tong marks and shall conform to BS EN 12150:2004.
LAMINATED GLASS:
Laminate glass to conform to BS EN ISO 12543:1998. Title:
Double glazed units to be manufactured in accordance with EN 1279. Visual approval criteria
Edge spacers of the DGU to be warm edge, in accordance with EN ISO 10077-6:2012. All toughened glass shall be heat soaked to reduce the risk of nickel
a.) One bubble of 2-3mm diameter per linear metre is acceptable at the
sulphide inclusions.
DIMENSIONAL TOLERANCES FOR SGU & LAMINATED GLASS The glass shall conform to the following requirements in the horizontal
junction between the edge tape and the interlayer.
GLASS SCHEDULE
DEFECTS: b.) In the body of the laminate, bubbles up to 3mm in diameter are
With edge work made before the lamination The glass shall be cut clean, without edge faults such as feathered edges, shells or other imperfections. toughening process:
acceptable if at least 1 metre apart.
Edges Dimensions RECTANGULAR GLASS SHAPED GLASS Defects which are not detrimental to the performance shall be subject to the following viewing criteria: 1. Maximum Bow: glass thickness of 6mm and under
(mm) a.) Scratches not visible from 2000mm viewing distance with a white, well-lit background are acceptable. glass thickness greater than 6mm
finishing >4000 >4000 These inspections shall be carried out under normal daylight conditions, from a Drawn: Checked: Scale @ A1: Approved:
H b.) Bubbles and inclusions up to 0.5mm at least 150mm apart are acceptable. distance of 3 metres and confined to the normal H
L/H c.) Occasional white surface scars are acceptable within 100mm of an edge.
2. Roller Wave: KK CR
Ground, Smooth 3.
vision area defined as an oval with axes equal to the height and width of the
Date: Date:
NTS Date:
laminate.
ground or Polished 1 2.5 2 3 All glass shall be manufactured and processed in a factory where the quality control procedures 24/01/19 24/01/19
+1 / mt +1 / mt
comply with BS 5750 or equivalent and are independently maintained. Edge working unless stated otherwise shall be flat ground with a small Drawing No.: Revision:
L/H ground arris and have a frosetd appearance. Small shells and/or chips
shall be ground out prior to toughening. Maximium chipshell diameter shall
Cut or Arrised
not exceed 2mm.
G1-01 00
2 3 + 1 / mt 2.5 4 +1 / mt
1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

A A

B B

C C

D D

E E

02 28/06/19 Issued For Construction KK DM

01 08/05/19 Issued For Construction KK SP

F 00 02/04/19 First Issue KK SP F

Rev Date Description Drawn Checked

Status:

For Construction

G G

Project:

Title:

Elevation- CW4

Drawn: Checked: Scale @ A1: Approved:

H H
KK SP
Date: Date:
1:25 Date:
02/04/19 02/04/19
Drawing No.: Revision:

E302 02
1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

A A

B B

C C

D D

E E

01 08/05/19 Issued For Construction KK SP

F 00 02/04/19 First Issue KK SP F

Rev Date Description Drawn Checked

Status:

For Construction

G G

Project:

Title:

Section- CW4/5

Drawn: Checked: Scale @ A1: Approved:

H H
KK SP
Date: Date:
1:25 Date:
02/04/19 02/04/19
Drawing No.: Revision:

E304 01
1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

A A

B B

CW4 Typical Vertical Detail

02 Scale 1:2.5

C C

D D

E E

02 28/06/19 Issued For Construction KK DM

01 08/05/19 Issued For Construction KK SP

F 00 02/04/19 First Issue KK SP F

CW4 Typical Vertical Detail

01 Scale 1:2.5
Rev Date Description Drawn Checked

Status:

For Construction

G G

Project:

Title:

CW4 Typical Vertical Detail

Drawn: Checked: Scale @ A1: Approved:

H H
KK SP
Date: Date:
1:2.5 Date:
02/04/19 02/04/19
Drawing No.: Revision:

D311 02
1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

A A

B B

C C

Head Detail Head Detail

02 Scale 1:2.5
03 Scale 1:2.5

D D

Cill Detail
01 Scale 1:2.5

E E

Cill Detail
04 Scale 1:2.5

02 21/06/19 Upstand level confirmed as KK DM

18.122

01 30/04/19 Updated As Per Comment KK CR

F 00 15/03/19 First Issue KK CR F

Rev Date Description Drawn Checked

Status:

For Construction

G G

Project:

Title:

Section Details
Glazed Link

Drawn: Checked: Scale @ A1: Approved:

H H
KK CR
Date: Date:
1:2.5 Date:
15/03/19 15/03/19
Drawing No.: Revision:

D411 02
1 2 3 4 5 6 7 8 9 10 11 12
 1 2 3 4 5 6 7 8 9 10 11 12

3rd Angle Projection *Hanging Hole

63
A
Joint Sleeve A

Finish :-
Denotes visible face
Interpon RAL 9016 ARC0288 Matt (30% gloss)
to be Painted
Note: Flashing to be fixed to Mullion using CLA51 at approx 400mm centre to centre. 2mm Thick Aluminium Sheet
*
All Welds Dressed Flush. (Finish: Interpon RAL 9016
Flashing needs to be Join with RF52 and RF54 as shown on SE403/SE404. ARC0288 Matt - 30% gloss)
B
This need to be Checked Prior to Delivery on site. B
Non- Combustible A1
Class Packer To Be
Bonded in the Factory
Non- Combustible A1

145

145
Weld Dressed Flush 1.6mm Thick Pre-Coated Class Packer To Be
319 Galvanized Steel Sheet Bonded in the Factory
(Finish: Mill)
272 47 53 1.6mm Thick Pre-Coated
Galvanized Steel Sheet

Joint Sleeve
C
146 Packer Length (Finish: Mill) C

250

246

250
2mm Thk Aluminium Joint Sleeve
179 65 75 To Be Bonded in the Factory
D

Sleeve
Joint
63

67
41
102

D D

* D
Packer Length

105

105
150
217

105

C C
100
65

ve
150

2
ee

2
2
Joint Sleeve

Sl
int
Jo

Jo

48 leev
50

47

int 50
*

50

S
E E

SECTION C-C SECTION D-D

e
169 Scale 1:1 Scale 1:1

319 217
272 47 53 47 170 01 30/08/19 Revised As Per New Details KK DM

F
169 150 150 67 00 28/06/19 First Issue KK DM F

D C
Rev Date DesDMiption Drawn Checked

Status:

MANUFACTURE
146 Packer Length 105 Packer Length
145

145
Joint Sleeve

G G
250

246

250

Project:
179 65 75 75 65 77
Isometric view Title:
105

105

RL3A and RL3B Flashing Schedule

H 50 Drawn:
KK
Checked:
DM
Scale @ A1: Approved:
H
50

Date: Date:
1:2 Date:
100 C PART NUMBER REMARKS QUANTITY 28/06/19 28/06/19
Drawing No.: Revision:

D Joint Sleeve
RF51 (As Shown) 2 RF51 01
1 2 3 4 5 6 7 8 9 10 11 12
 LEGENDS DO NOT SCALE
Corium 12000 Smooth Red N6 N5 N4 N3 N2 N1
-
(Laid in horizontal stretcher bond)
1 3 5 7 9 11 13 15 17 19 21 23

E7 W4 W6
A
Corium 12000 Smooth Red E6
- C
(Laid in vertical stretcher bond) E5
E E1 E2 E3
G
K
M E4
W1
Corium 62100 Grey P
- Q
(Laid in horizontal stretcher bond)
W2 W3 W5 W7

S1 S2 S3 S4 S5 S6 S7 S8

Key Plan
NOTES

18 17 1
16 B C 16 15 14 13 C B 12 11 10 9 8
6140 6280 6580 12.5 1713 2535 4945 3180 3672.5 1713 505 1983 4155 1990 4385 2542.5

8157 16-MJ 10839 607.5 1307.5 12.5 1307.5 605 7753 16-MJ 7791

1
Top of Coping
DE-227 Top of Coping
+71.025
+71.025
815

815

815

815

815
+69.925
Level 10
685

685

685

685

685
15 - MJ

15 - MJ

15 - MJ

15 - MJ

15 - MJ
PF022-EL-140 DE-228

3300
1
02
2536

2536

2536

2536

2536
1
1
DE-223
SE-301
79

79

79

79

79
+66.625
15 - MJ

15 - MJ

15 - MJ

15 - MJ

15 - MJ
Level 09
385

385

385

385

385

3000
2980

2980

2980

2980

2980
SE-301
1

+63.625
DETAIL REF. No.
385

385

385

385

385
20-MJ

20-MJ

20-MJ

20-MJ

20-MJ
--
!
Level 08
-- DRAWING No.

3000
NOT FOR SITE USE
2980

2980

2980

2980

2980
+60.625
385

385

385

385

385
20-MJ

20-MJ

20-MJ

20-MJ

20-MJ
Level 07

3000
2980

2980

2980

2980

2980
+57.625
385

385

385

385

385
20-MJ

20-MJ

20-MJ

20-MJ

20-MJ
Level 06

3000
2980

2980

2980

2980

2980
+54.625
385

385

385

385

385
20-MJ

20-MJ

20-MJ

20-MJ

20-MJ
Level 05

3000
PF022-EL-140
2980

2980

2980

2980

2980
02

+51.625
385

385

385

385

385
20-MJ

20-MJ

20-MJ

20-MJ

20-MJ
Level 04

1 1

3000
DE-201 DE-202
BRICK ARRANGEMENT
A 05.06.19 -
2980

2980

2980

2980

2980
REVISED

1 1 REV BY DESCRIPTION DATE CHK'D

DE-200 DE-224
2
SE-303 +48.625
385

385

385

385

385
20-MJ

20-MJ

20-MJ

20-MJ

20-MJ
Level 03
FOR APPROVAL

3000
2536

2536

2536

2536

2536
DRAWING STATUS

+45.625
79

79

79

79

79
385

385

385

385

385
Level 02
SE-303
2

3000
5225

5225

5225

5225

5225
+42.625
Level 01

3825
1215

1215

1215

1215

1215
CLIENT
+38.800
Level 00

1000
+37.800
Level -1

GREY BRICK & ACM SETTING OUT

PROJECT
TO BE CONFIRMED

DRAWING TITLE

NORTH, EAST & WEST ELEVATIONS

PF022 PF022 PF022 PF022 PF022
CORIUM BRICK
EL-131-01 NORTH ELEVATION N4
SCALE 1:100 EL-131-02 WEST ELEVATION W4
SCALE 1:100 EL-131-03 NORTH ELEVATION N5
SCALE 1:100 EL-131-04 EAST ELEVATION E7
SCALE 1:100 EL-131-05 NORTH ELEVATION N6
SCALE 1:100 SCHEDULE 02
DATE SCALE
26.04.2019 1:100 @ A1
DRAWN CHECKED

CONTRACT AREA CODE DRAWING No. REVISION

EL 131 A
 685

PF022
Level 11

SE-302-1
Top of Coping

Level 12
Top of Upstand

2840 460 1265 440 125

685 225

875 c/c 875 c/c 875 c/c 350 c/c 897 c/c 896 c/c 111

70 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 120 235 70 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 120 280 150

65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

15

150
500

75 75
150

175 425
65 35

100

125

WINDLOAD
WINDLOAD
WINDLOAD
WINDLOAD
WINDLOAD

DEADLOAD
DEADLOAD
655
655

3285 Rail Length 2135 Rail Length

3300 Floor to Floor 1480

1
1

Typical Vertical Section @ W2, S1 & E1 - Through 12th Floor Roof

PF022-DE-248
PF022-DE-247

SCALE 1:10
Level 10
Top of Coping

Top of Upstand

PF022
Level 09

SE-302-2
685

464 2536 460 290 125 95

385 79
420 c/c 858 c/c 858 c/c 858 c/c 350 c/c 546 c/c 120

10 10 10 10 15 120 250 57 22 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 120 235 70 20 10 10 10 15 60 25 120

65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

15 15
550

200

175 475 71
65

100
35

95

WINDLOAD
WINDLOAD
WINDLOAD
WINDLOAD
WINDLOAD

DEADLOAD
DEADLOAD

Typical Vertical Section @ S3 - Through 10th Floor Roof

SCALE 1:8
Rail Length 2985 Rail Length 845 Rail Length

655
Floor to Floor 3300 Floor to Floor 190
1

1
PF022-DE-225

PF022-DE-223

PF022
SE-302-3
Level 09
Level 10
Top of Coping

Top of Upstand

464 2536 460 225 590 385 132

385 79 501
420 c/c 858 c/c 858 c/c 858 c/c 390 c/c 650 c/c 650 c/c 110

10 10 10 10 15 120 250 57 22 9 9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 120 235 70 20 10 10 10 10 10 10 10 10 10 10 15 120 232 150

65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

15 15
550

200

175 435

100
65 35

125
WINDLOAD

WINDLOAD

WINDLOAD
WINDLOAD

DEADLOAD
WINDLOAD

WINDLOAD
DEADLOAD

Rail Length 2985 Rail Length 1630 Rail Length

655
Typical Vertical Section @ S4,W3 & S5 - Through 10th Floor Roof

Floor to Floor 3300 Floor to Floor 975

1
1
1

SCALE 1:10
PF022-DE-223
PF022-DE-228
PF022-DE-227

.
.
REV

DATE
--
--
NOTES

CLIENT

DRAWN
PROJECT
Key Plan

BY

CONTRACT
Architect
Steelwork

DRAWING TITLE
Sub-Contractor

21.06.2019

SE
DRAWING No.

AREA CODE
DETAIL REF. No.

DESCRIPTION

SCALE
UPDATED AS PER DETAILS

DRAWING STATUS

CHECKED
!

302
DRAWING REFERENCES

DRAWING No.
ABC-DEF-GHI
ABC-DEF-GHI
ABC-DEF-GHI

DATE
23.10.19

FOR APPROVAL
NOT FOR SITE USE

Corium Brick Vertical Sections 02

DO NOT SCALE

N/A @ A1

A
REVISION
CHK'D
 H
FIXING SPECIFICATION DO NOT SCALE
1 NOTES
80mm Mineral Fibre Insulation
Top of Coping 550 (To Be Site Measured) 5
3mm Galvanized Support Bracket 2
+70.265
@500mm c/c Max
3 + Washer
3mm PPC Aluminium Coping 4.8dia x 16mm Long Rivets With a 9mm Head
4 Alu/SS. PPC RAL To Match Flashing

125
Bracket Anchors In Accrdance With SE

150
5 Calculations
Perforated PPC Angle

125
6
+70.115
7
Top of Upstand
8 M8 Frame Fixing

25
75
100 155 Bracket Range

110
O/A Buildup By Others Fixing Note: Isolate All Dissimilar Materials
2mm PPC Aluminium Feature Flashing,

60
RAL 7037

75
5

15
Mastic Seal To Head Flashing

60 Drainage Slots

65

80
+69.925
-- DETAIL REF. No.
Level 10
!

10 Typ
3mm thk Ali Helping Hand Bracket -- DRAWING No.
With 3mm Washer Plate And Isolation Packer
Horizontally Installed Corium Brick-Slip

325
System with Carrier Tray & Flush Pointed

245
65 Typ
60
100x60x2.2mm thk Extruded 'T'
100 200 Upstand 100 Ins 55 35
Rail, Fixed To HH Brackets
Cavity

315
60 HPS200 Corium Rails
Mastic Seal To Feature Flashing
Abutment

20
2mm PPC Aluminium Feature Flashing,

70
RAL 7037
AS PER COMMENTS
A 12.09.19
CONSTRUCTION ISSUE
150

670
REV BY DESCRIPTION DATE CHK'D
1 93
5
3mm thk Ali Helping Hand Dead Load Bracket
CONSTRUCTION ISSUE
(NOTE: Fixings To Be At the Bottom Of the Slots) DRAWING STATUS

425
235
Ventilated Fire Barrier At Floor Level,
Siderise RH50G-30/30
175

355
50
105 MAX
100mm Mineral Fibre Insulation

2mm PPC Aluminium Feature Flashing,

90mm SFS RAL 7037
4 120
90mm Mineral Fibre Insulation Within SFS 2mm Ali Mill Finish Support Profile
NOTE: To Be Fixed Through Oversized Holes To Allow For Movement
180mm VCL Lapping Piece Trapped CLIENT
180

15

MJ
Above Head of SFS By Others Mastic Seal To Head Flashing
15

9mm Y-Wall Sheathing Board 60 Drainage Slots

Main VCL By Others PROJECT
EPDM Bonded To Slab And Y Wall
At All SFS To Concrete Interfaces
Internal Finishes By Others,
Min 100mm Overlap
Indicative Only
Horizontally Installed Corium Brick-Slip
DRAWING TITLE
System with Carrier Tray & Flush Pointed
140mm Mineral Fibre Insulation Level 10 Terrace Parapet Detail

90 9 140 Ins 81 Cavity .

221 34 DATE SCALE
11.04.2019 1:5 @A3
255 Zone 65 DRAWN CHECKED

CONTRACT AREA CODE DRAWING No. REVISION

PF022
DE-225 Level 10 Terrace Parapet Detail
SCALE 1:5 DE 225 A
 FIXING SPECIFICATION DO NOT SCALE
60x40x2.2mm Thk Horizontal Aluminium Support NOTES
1 Angle, Inc Continuous 2mm thk Ali Packing Plate
2

3 + Washer
4.8dia x 16mm Long Rivets With a 9mm Head
4 Alu/SS. PPC RAL To Match Flashing
Bracket Anchors In Accrdance With SE
5 Calculations
6 10 65 10 65 10 65 10 65 10

7
HPS200 Corium Rails Vertically Installed Corium Brick-Slip System with
8 M8 Frame Fixing Carrier Tray & Flush Pointed
Fixing Note: Isolate All Dissimilar Materials

Section A-A, Scale 1:5

2mm Thk PPC Aluminium Cill Flashing Support Angle, EPDM to Window Heads and Cills (By Others)
RAL 7037

2mm Thk PPC Aluminium Cill Flashing, RAL 7037 -- DETAIL REF. No.
NOTE: Sill designed for cleaning and maintenance
of sill only. No loads from abseiling or other window
maintenance operations are acceptable.
215 75 Ref
90mm Mineral Fibre Insulation Within SFS -- DRAWING No. !
Internal Finishes By Others, Indicative Only
3mm Thk Mill Finish Perforated Cill Flashing Support

21

8
Main VCL By Others

73
65
57
Level 03
9mm Y-Wall Sheathing Board

60x40x2.2mm Thk Horizontal Aluminium Support Angle Spanning VCL Lapping Piece Trapped Under

63

250 Slab (275mm, Floor 4 - 9)

Between Vertical Rails, Inc Continuous 2mm thk Ali Packing Plate Base of SFS By Others
35 1
210 220
Vertically Installed Corium Brick-Slip System with EPDM Bonded To Slab And Y Wall
Carrier Tray & Flush Pointed 255 At All SFS To Concrete Interfaces

75
Min 100mm Overlap
3mm thk Helping Hand Dead Load Bracket A
AS PER COMMENTS
12.09.19
CONSTRUCTION ISSUE
(NOTE: Fixings To Be At the Bottom Of the Slot)
REV BY DESCRIPTION DATE CHK'D
140mm Mineral Fibre Insulation
5
365

CONSTRUCTION ISSUE

113
10

Ventilated Fire Barrier At Floor Level, Siderise RH50G-30/30

90mm Mineral Fibre Insulation Within SFS DRAWING STATUS

A A
100x60x2.2mm thk Extruded T Rail @ Max 600mm Ctrs, 50 Main VCL By Others
167

135 To SFS S.O

Fixed To Support Brackets MAX
9mm Y-Wall Sheathing Board

60x40x2.2mm Thk Horizontal Aluminium Support VCL Lapping Piece Trapped Above
15
Angle, Inc Continuous 2mm thk Ali Packing Plate 4 Head of SFS By Others
NOTE: To Be Fixed Through Oversized
20

Holes To Allow For Movement 90mm SFS

Mastic Seal

Head Flashing
2 u/s Window
8

Full Fill Glazing Surround Fire Barrier, Siderise RVG-90/30

185 10 75 Ref CLIENT

125x50x2mm Thks Mill Finish Head Support Angle

2mm Thk PPC Aluminium Window Head Flashing, RAL 7037 PROJECT

2mm Thk PPC Aluminium Closure Trim, RAL 7037

Glazing By Others Sealed Back To DRAWING TITLE

Structure Independent Of Corium System
DF1413
Typical Corium Head & Cill Detail
.
DF056
.
DATE SCALE
25.02.2019 1:5 @A3
DRAWN CHECKED

CONTRACT AREA CODE DRAWING No. REVISION

PF022
SCALE 1:5
DE-200 Typical Corium Head & Cill Detail DE 200 A
 DO NOT SCALE
NOTES

255 Zone

34 81 Cavity 140 Ins 9 90

Internal Finish Indicative

10
Only By Others

-- DETAIL REF. No.

2mm thk Galv Steel Tophat, NB

Tophat To Packed Tight With Mineral
9mm Y-Wall Sheathing Board
-- DRAWING No. !
Fibre Insulation Prior To Installation 90mm Mineral Fibre
Insulation Within SFS
215

181 Bracket Range 40

90mm SFS
3mm thk Ali Helping Hand
Bracket With 3mm Washer Plate
And Isolation Packer
10

90
100

40x60x2.2mm thk Extruded

Angle Rail, Fixed To HH Brackets A CONSTRUCTION ISSUE 12.09.19
10

9
REV BY DESCRIPTION DATE CHK'D

40
2 CONSTRUCTION ISSUE
215

DRAWING STATUS
329

140 Ins
100
140mm Mineral Fibre Insulation

181 Bracket Range

255 Zone
10

329

81 Cavity
40x40x2mm Thk Galv Steel 1
103

External Corner Angle

Corium 'Pistol' External

34
Corner Cut & Bonded
CLIENT

215 10 215 10 215 10

PROJECT
Horizontally Installed Corium Brick-Slip
FIXING SPECIFICATION System with Carrier Tray & Flush Pointed

1
DRAWING TITLE
2
Corium Brick External Corner Detail 1
3 + Washer

4
4.8dia x 16mm Long Rivets With a 9mm Head PF022 .
Alu/SS. PPC RAL To Match Flashing DE-235 SCALE 1:4
Corium Brick External Corner Detail 1 DATE SCALE
Bracket Anchors In Accrdance With SE
5 Calculations 18.04.2019 1:4 @A3
DRAWN CHECKED
6

7 CONTRACT AREA CODE DRAWING No. REVISION

8 M8 Frame Fixing DE 235 A

Fixing Note: Isolate All Dissimilar Materials
 IMPORTANT NOTICE
X claims proprietary rights to the information disclosed hereon. This drawing is furnished in
confidence on the express understanding that neither it or any reproduction thereof will be
disclosed to others or use for the purpose of manufacture or procurement of the article or part
shown hereon without the express consent in writing
of X. It should be understood that any article or part either made in accordance with the
attached drawing or copied from an article or part made in accordance with said drawing,
without the express permission in writing of X will be an infringement of the copyright which
subsists in said drawing and therefore actionable at law.

DO NOT SCALE - IF IN DOUBT ASK

SAFETY, HEALTH AND

ENVIRONMENTAL INFORMATION
SITE-WIDE AND GENERAL RISKS:
THE FOLLOWING NOTES SHOULD BE READ IN CONJUNCTION
WITH X PROJECTS HEALTH AND SAFETY PROCEDURES , THE
PROJECT SPECIFIC METHOD STATEMENTS AND THE SITE
INDUCTION NOTES.

IN ADDITIONAL TO THE RISKS NORMALLY ASSOCIATED WITH THE TYPES OF WORK

DETAILED ON THIS DRAWING, NOTE THE FOLLOWING SIGNIFICANT RISKS AND
INFORMATION:

CONSTRUCTION RISKS:

THE DESIGN TEAM HAVE HIGHLIGHTED THE UNUSUAL AND SIGNIFICANT RISKS
ONLY THAT MAY NOT BE OBVIOUS TO A COMPETENT PERSON/CONTRACTOR. THEY
ARE TO ASSIST IN RISK REDUCTION ONLY AND ARE NOT NECESSARILY
COMPREHENSIVE. IT IS ASSUMED THAT ALL WORKS WILL BE CARRIED OUT BY A
COMPETENT PERSON/CONTRACTOR WORKING, WHERE APPROPRIATE, TO AN
APPROVED METHOD STATEMENT.

Elevation Section Section

01 Scale 1:40
02 Scale 1:40
03 Scale 1:40

C1 30.01.19 Issued For Construction KK

P1 06.11.19 Issue For Approval KK

REV DATE DESCRIPTION BY

Cladding 03
Elevation,Plan & Section
PLAN PLAN
04 Scale 1:40
05 Scale 1:40
SCALE
SCALE @ 1:40 DATE
06.11.19 DRAWN BY
KK
DRG No. CHECKED
DM
X-GA-203 REVISION
C1
ISSUED FOR
CONSTRUCTION ORIGINAL SIZE A1
 IMPORTANT NOTICE
X claims proprietary rights to the information disclosed hereon. This drawing is furnished in
confidence on the express understanding that neither it or any reproduction thereof will be
disclosed to others or use for the purpose of manufacture or procurement of the article or part
shown hereon without the express consent in writing
of X. It should be understood that any article or part either made in accordance with the
attached drawing or copied from an article or part made in accordance with said drawing,
without the express permission in writing of X will be an infringement of the copyright which
subsists in said drawing and therefore actionable at law.

DO NOT SCALE - IF IN DOUBT ASK

SAFETY, HEALTH AND

ENVIRONMENTAL INFORMATION
SITE-WIDE AND GENERAL RISKS:
THE FOLLOWING NOTES SHOULD BE READ IN CONJUNCTION
WITH X PROJECTS HEALTH AND SAFETY PROCEDURES , THE
PROJECT SPECIFIC METHOD STATEMENTS AND THE SITE
INDUCTION NOTES .

IN ADDITIONAL TO THE RISKS NORMALLY ASSOCIATED WITH THE TYPES OF WORK

DETAILED ON THIS DRAWING, NOTE THE FOLLOWING SIGNIFICANT RISKS AND
INFORMATION:

CONSTRUCTION RISKS:

Intermediate Detail - Cladding

02 Scale 1:2.5

Bottom Detail - Cladding

01 Scale 1:2.5

THE DESIGN TEAM HAVE HIGHLIGHTED THE UNUSUAL AND SIGNIFICANT RISKS
ONLY THAT MAY NOT BE OBVIOUS TO A COMPETENT PERSON/CONTRACTOR. THEY
ARE TO ASSIST IN RISK REDUCTION ONLY AND ARE NOT NECESSARILY
COMPREHENSIVE. IT IS ASSUMED THAT ALL WORKS WILL BE CARRIED OUT BY A
COMPETENT PERSON/CONTRACTOR WORKING, WHERE APPROPRIATE, TO AN
APPROVED METHOD STATEMENT.

P2 30.01.19 Issue For Approval KK

P1 06.11.19 Issue For Approval KK

REV DATE DESCRIPTION BY

Cladding
Vertical Details

SCALE DATE DRAWN BY

SCALE @ 1:2.5 06.11.19 KK
DRG No. CHECKED
DM
X-DT-203 REVISION
P2
ISSUED FOR
######## ORIGINAL SIZE A1
 IMPORTANT NOTICE
X claims proprietary rights to the information disclosed hereon. This drawing is furnished in
confidence on the express understanding that neither it or any reproduction thereof will be
disclosed to others or use for the purpose of manufacture or procurement of the article or part
shown hereon without the express consent in writing
of X. It should be understood that any article or part either made in accordance with the
attached drawing or copied from an article or part made in accordance with said drawing,
without the express permission in writing of X will be an infringement of the copyright which
subsists in said drawing and therefore actionable at law.

DO NOT SCALE - IF IN DOUBT ASK

SAFETY, HEALTH AND

ENVIRONMENTAL INFORMATION
SITE-WIDE AND GENERAL RISKS:
THE FOLLOWING NOTES SHOULD BE READ IN CONJUNCTION
WITH X PROJECTS HEALTH AND SAFETY PROCEDURES , THE
PROJECT SPECIFIC METHOD STATEMENTS AND THE SITE
INDUCTION NOTES .

IN ADDITIONAL TO THE RISKS NORMALLY ASSOCIATED WITH THE TYPES OF WORK

DETAILED ON THIS DRAWING, NOTE THE FOLLOWING SIGNIFICANT RISKS AND

Copping Detail INFORMATION:

03 Scale 1:2.5 CONSTRUCTION RISKS:

Head Detail Of Door

02 Scale 1:2.5

THE DESIGN TEAM HAVE HIGHLIGHTED THE UNUSUAL AND SIGNIFICANT RISKS
ONLY THAT MAY NOT BE OBVIOUS TO A COMPETENT PERSON/CONTRACTOR. THEY
ARE TO ASSIST IN RISK REDUCTION ONLY AND ARE NOT NECESSARILY
COMPREHENSIVE. IT IS ASSUMED THAT ALL WORKS WILL BE CARRIED OUT BY A
COMPETENT PERSON/CONTRACTOR WORKING, WHERE APPROPRIATE, TO AN
APPROVED METHOD STATEMENT.

P2 30.01.19 Issue For Approval KK

P1 06.11.19 Issue For Approval KK

REV DATE DESCRIPTION BY

Sill Detail of Door

01 Scale 1:2.5 Cladding
Vertical Details

SCALE DATE DRAWN BY

SCALE @ 1:2.5 06.11.19 KK
DRG No. CHECKED
DM
X-DT-205 REVISION
P2
ISSUED FOR
######## ORIGINAL SIZE A1
 IMPORTANT NOTICE
X claims proprietary rights to the information disclosed hereon. This drawing is furnished in
confidence on the express understanding that neither it or any reproduction thereof will be
disclosed to others or use for the purpose of manufacture or procurement of the article or part
shown hereon without the express consent in writing
of X. It should be understood that any article or part either made in accordance with the
attached drawing or copied from an article or part made in accordance with said drawing,
without the express permission in writing of X will be an infringement of the copyright which
subsists in said drawing and therefore actionable at law.

DO NOT SCALE - IF IN DOUBT ASK

SAFETY, HEALTH AND

ENVIRONMENTAL INFORMATION
SITE-WIDE AND GENERAL RISKS:
THE FOLLOWING NOTES SHOULD BE READ IN CONJUNCTION
WITH X PROJECTS HEALTH AND SAFETY PROCEDURES , THE
PROJECT SPECIFIC METHOD STATEMENTS AND THE SITE
INDUCTION NOTES .

IN ADDITIONAL TO THE RISKS NORMALLY ASSOCIATED WITH THE TYPES OF WORK

DETAILED ON THIS DRAWING, NOTE THE FOLLOWING SIGNIFICANT RISKS AND
INFORMATION:

CONSTRUCTION RISKS:

THE DESIGN TEAM HAVE HIGHLIGHTED THE UNUSUAL AND SIGNIFICANT RISKS
ONLY THAT MAY NOT BE OBVIOUS TO A COMPETENT PERSON/CONTRACTOR. THEY
ARE TO ASSIST IN RISK REDUCTION ONLY AND ARE NOT NECESSARILY
COMPREHENSIVE. IT IS ASSUMED THAT ALL WORKS WILL BE CARRIED OUT BY A
COMPETENT PERSON/CONTRACTOR WORKING, WHERE APPROPRIATE, TO AN
APPROVED METHOD STATEMENT.

C1 30.01.19 Issued For Construction KK

P1 06.11.19 Issue For Approval KK

REV DATE DESCRIPTION BY

Intermediate Detail - Cladding

01
Coner Detail - Cladding 02 Scale 1:2.5
Scale 1:2.5

Cladding
Horizontal Details

SCALE DATE DRAWN BY

SCALE @ 1:2.5 06.11.19 KK
DRG No. CHECKED
DM
X-DT-252 REVISION
C1
ISSUED FOR
CONSTRUCTION ORIGINAL SIZE A1