0% found this document useful (0 votes)

34 views

Calculation Note

Uploaded by

ali

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

34 views

Calculation Note

Uploaded by

ali

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 70

Gas station canopy

Calculation Note
03/06/2022
Design Specification
Design Code Bs5950-2000
Autodesk Robot 2019
Programs
AutoCAD 2020
Steel Yield Strength 275 Mpa
210000 Mpa
E (Modulus of elasticity of steel )

Design Load
Self-Weight By Program
Dead load 15kg/m2
Live Load 60 kg/m2
Wind Velocity (V) 46 m/sec
S1 1
S2 0.88
Vs=v*s1*s2*s3 40.48 m/sec
Qs=0.613*vs2 1 kn/m2
P for cp (0.5) 0.5 kn/m2
P for cp (-0.6) -0.6 kN/m2
Load Combination
ULS:1.4D
ULS:1.2D +1.6w1
ULS:1.2D +1.6ind2
ULS:0.9D+1.6W1
ULS:0.9D+1.6W2
ULS:1.2D+1.2L+1.2W1
ULS:1.2D+1.2L+1.2W2
ULS:1.4D+1.4W1
ULS:1.4D+1.4W2
SLS:D
SLS:D+W1+L
SLS:D+W2+L

1. Architecture drawings
2. Robot model
3. Deformation

SLS:D+L+W1

SECTION PARAMETERS: TREC 200x100x6

D=200.0 mm
B=100.0 mm Ay=1115.00 mm2 Az=2230.00 mm2 A=3345.00 mm2
t=6.0 mm Iy=16850000.00 mm4 Iz=5723000.00 mm4 Ix=14160000.00
mm4
T=6.0 mm Wely=168500.00 mm3 Welz=114460.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 136.55 kN Mz = -1.14 kN*m Fvy = -5.68 kN
Mzmax = 6.72 kN*m
mz = 0.95 myz = 0.95
--------------------------------------------------------------------------------------- -------------------------------------
------------
CAPACITIES
Pc = 919.88 kN Mcz = 37.41 kN*m Pvy = 183.97 kN
Section class = 2 Mez = 31.48 kN*m
---------------------------------------------------------------------------------------------------------- ------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

Ly = 13.35 m pey = 58.58 MPa Lz = 13.35 m pez = 1945.71
MPa
Ley = 13.35 m Fiy = 176.79 MPa Lez = 1.35 m Fiz = 1140.08
MPa
Lamy = 188.10 py = 53.72 MPa Lamz = 32.64 pz = 265.60 MPa
ny = 0.34 Pcy = 179.71 kN nz = 0.03 Pcz = 888.44 kN
----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + Mz/Mcz = 0.18 < 1.00 (4.8.3.2)
Fvy/Pvy = 0.03 < 1.00 (4.2.3)
Member stability check
Fc/Pcy + 0.5*myz*Mzmax/Mcz = 0.85 < 1.00 (4.8.3.3.3b)
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 8.3 mm < uy max = L/200.00 = 66.8 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 66.8 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------
------------
CODE: British Standard BS 5950:2000
ANALYSIS TYPE: Member Verification
---------------------------------------------------------------------------------------------------- ------------------------
------------
CODE GROUP:
MEMBER: 17 Diagonal _17 POINT: COORDINATE: x = 0.00 L =
0.00 m
----------------------------------------------------------------------------------------------------------------------------
------------
LOADS:
Governing Load Case: 14 1.2D+1.2L+1.2W1 (1+2+3)*1.20
----------------------------------------------------------------------------------------------------------------------------
------------
MATERIAL
S 275 py = 275.00 MPa E = 210000.00 MPa
----------------------------------------------------------------------------------------------------------------------------
------------

SECTION PARAMETERS: TCAR 50x2.5

----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 127.60 kN
Section class = 3
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.74 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 2 LL1
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TREC 120x60x3.2

D=120.0 mm
B=60.0 mm Ay=368.67 mm2 Az=737.33 mm2 A=1106.00 mm2
t=3.2 mm Iy=2072000.00 mm4 Iz=695600.00 mm4 Ix=1650000.00
mm4
T=3.2 mm Wely=34533.33 mm3 Welz=23186.67 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -136.42 kN Mz = 2.13 kN*m Fvy = 6.62 kN
Mzmax = 2.13 kN*m

----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 304.15 kN Mcz = 7.26 kN*m Pvy = 60.83 kN
Section class = 1 Mez = 6.38 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

------------------------------------------------------------------------------------------------------- ---------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + Mz/Mcz = 0.74 < 1.00 (4.8.2.2)
Fvy/Pvy = 0.11 < 1.00 (4.2.3)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 8.5 mm < uy max = L/200.00 = 66.8 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 66.8 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TREC 120x60x3.2

--------------------------------------------------------------------------------------------------------- -------------------
------------
CAPACITIES
Pt = 304.15 kN Mcz = 7.26 kN*m Pvy = 60.83 kN
Section class = 1 Mez = 6.38 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + Mz/Mcz = 0.74 < 1.00 (4.8.2.2)
Fvy/Pvy = 0.10 < 1.00 (4.2.3)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 1.8 mm < uy max = L/200.00 = 29.3 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 29.3 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 82.90 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00 my = 0.95
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

------------------------------------------------------------------------------------------------------------------ ----------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.66 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
--------------------------------------------------------------------------------------------------------------------- -------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -76.29 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + My/Mcy = 0.60 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 8.4 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 8.4 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TREC 200x100x8

D=200.0 mm
B=100.0 mm Ay=1448.67 mm2 Az=2897.33 mm2 A=4346.00 mm2
t=8.0 mm Iy=21130000.00 mm4 Iz=7110000.00 mm4 Ix=18010000.00
mm4
T=8.0 mm Wely=211300.00 mm3 Welz=142200.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 137.71 kN Mz = 9.09 kN*m Fvy = 7.54 kN
Mzmax = 9.09 kN*m
mz = 0.95 myz = 0.95
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 1195.15 kN Mcz = 48.24 kN*m Pvy = 239.03 kN
Section class = 1 Mez = 39.11 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

Ly = 12.00 m pey = 69.98 MPa Lz = 12.00 m pez = 1507.01
MPa
Ley = 12.00 m Fiy = 183.32 MPa Lez = 1.50 m Fiz = 920.73 MPa
Lamy = 172.10 py = 63.48 MPa Lamz = 37.09 pz = 262.46 MPa
ny = 0.31 Pcy = 275.88 kN nz = 0.04 Pcz = 1140.67 kN
----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + Mz/Mcz = 0.30 < 1.00 (4.8.3.2)
Fvy/Pvy = 0.03 < 1.00 (4.2.3)
Member stability check
Fc/Pcy + 0.5*myz*Mzmax/Mcz = 0.59 < 1.00 (4.8.3.3.3b)
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.7 mm < uy max = L/200.00 = 29.2 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 29.2 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 72.87 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00 my = 0.95
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.58 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 1 DL1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TREC 120x60x3.2

D=120.0 mm
B=60.0 mm Ay=368.67 mm2 Az=737.33 mm2 A=1106.00 mm2
t=3.2 mm Iy=2072000.00 mm4 Iz=695600.00 mm4 Ix=1650000.00
mm4
T=3.2 mm Wely=34533.33 mm3 Welz=23186.67 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -82.49 kN Mz = 1.95 kN*m Fvy = 6.42 kN
Mzmax = 1.95 kN*m

----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 304.15 kN Mcz = 6.38 kN*m Pvy = 60.83 kN
Section class = 3 Mez = 6.38 kN*m
-------------------------------------------------------------------------------------------------------------------- --------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + Mz/Mcz = 0.58 < 1.00 (4.8.2.2)
Fvy/Pvy = 0.11 < 1.00 (4.2.3)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 1.2 mm < uy max = L/200.00 = 29.2 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 29.2 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

STEEL DESIGN
----------------------------------------------------------------------------------------------------- -----------------------
------------
CODE: British Standard BS 5950:2000
ANALYSIS TYPE: Member Verification
----------------------------------------------------------------------------------------------------------------------------
------------
CODE GROUP:
MEMBER: 147 Diagonal _147 POINT: COORDINATE: x = 0.50 L =
0.90 m
----------------------------------------------------------------------------------------------------------------------------
------------
LOADS:
Governing Load Case: 14 1.2D+1.2L+1.2W1 (1+2+3)*1.20
----------------------------------------------------------------------------------------------------------------------------
------------
MATERIAL
S 275 py = 275.00 MPa E = 210000.00 MPa
----------------------------------------------------------------------------------------------------------------------------
------------
SECTION PARAMETERS: TCAR 50x2.5
D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -69.55 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

--------------------------------------------------------------------------------------------------------------- -------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + My/Mcy = 0.55 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
------------------------------------------------------------------------------------------------------------------ ----------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -66.36 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + My/Mcy = 0.53 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 4 WIND2
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -61.44 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
---------------------------------------------------------------------------------------------------------------- ------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + My/Mcy = 0.49 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 59.79 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00 my = 0.95
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

------------------------------------------------------------------------------------------------------------- ---------------
------------
BUCKLING PARAMETERS:
About Y axis: About Z axis:
----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.47 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 8.4 mm Verified
Governing Load Case: 4 WIND2
uz = 0.1 mm < uz max = L/200.00 = 8.4 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 58.39 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00 my = 0.95
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.46 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 4 WIND2
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TREC 200x100x8

D=200.0 mm
B=100.0 mm Ay=1448.67 mm2 Az=2897.33 mm2 A=4346.00 mm2
t=8.0 mm Iy=21130000.00 mm4 Iz=7110000.00 mm4 Ix=18010000.00
mm4
T=8.0 mm Wely=211300.00 mm3 Welz=142200.00 mm3
------------------------------------------------------------------------------------------------ ----------------------------
------------
INTERNAL FORCES
Fc = 88.37 kN Mz = 4.97 kN*m Fvy = -8.79 kN
Mzmax = 10.18 kN*m
mz = 0.95 myz = 0.95
---------------------------------------------------------------------------------------------------- ------------------------
------------
CAPACITIES
Pc = 1195.15 kN Mcz = 48.24 kN*m Pvy = 239.03 kN
Section class = 1 Mez = 39.11 kN*m
---------------------------------------------------------------------------------------------------------------------- ------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

Ly = 12.00 m pey = 69.98 MPa Lz = 12.00 m pez = 1507.01
MPa
Ley = 12.00 m Fiy = 183.32 MPa Lez = 1.50 m Fiz = 920.73 MPa
Lamy = 172.10 py = 63.48 MPa Lamz = 37.09 pz = 262.46 MPa
ny = 0.31 Pcy = 275.88 kN nz = 0.04 Pcz = 1140.67 kN
----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + Mz/Mcz = 0.18 < 1.00 (4.8.3.2)
Fvy/Pvy = 0.04 < 1.00 (4.2.3)
Member stability check
Fc/Pcy + 0.5*myz*Mzmax/Mcz = 0.42 < 1.00 (4.8.3.3.3b)
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.6 mm < uy max = L/200.00 = 29.3 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 29.3 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -46.99 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + My/Mcy = 0.37 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
------------------------------------------------------------------------------------------- ---------------------------------
------------
INTERNAL FORCES
Fc = 44.55 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00 my = 0.95
----------------------------------------------------------------------------------------------- -----------------------------
------------
CAPACITIES
Pc = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.36 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 34.37 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00 my = 0.95
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.28 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -32.46 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

------------------------------------------------------------------------------------- ---------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + My/Mcy = 0.26 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
---------------------------------------------------------------------------------------- ------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------
------------
CODE: British Standard BS 5950:2000
ANALYSIS TYPE: Member Verification
----------------------------------------------------------------------------------------------------------------------------
------------
CODE GROUP:
MEMBER: 151 Diagonal _151 POINT: COORDINATE: x = 0.50 L =
0.90 m
----------------------------------------------------------------------------------------------------------------------------
------------
LOADS:
Governing Load Case: 14 1.2D+1.2L+1.2W1 (1+2+3)*1.20
----------------------------------------------------------------------------------------------------------------------------
------------
MATERIAL
S 275 py = 275.00 MPa E = 210000.00 MPa
----------------------------------------------------------------------------------------------------------------------------
------------
SECTION PARAMETERS: TCAR 50x2.5
D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
------------------------------------------------------------------------------------------------------------ ----------------
------------
INTERNAL FORCES
Fc = 25.29 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00 my = 0.95
---------------------------------------------------------------------------------------------------------------- ------------
------------
CAPACITIES
Pc = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.20 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

--------------------------------------------------------------------------------------- -------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -20.91 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + My/Mcy = 0.17 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.10 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:
About Y axis: About Z axis:
----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.10 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 2 LL1
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 3 WIND1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TRON 406x6.3

D=406.4 mm
Ay=4751.27 mm2 Az=4751.27 mm2 A=7918.79 mm2
t=6.3 mm Iy=158494000.00 mm4 Iz=158494000.00 mm4 Ix=316988000.00
mm4
Wely=779990.16 mm3 Welz=779990.16 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 111.79 kN My = -8.71 kN*m
Mlt = -8.71 kN*m Mymax = -8.71 kN*m Fvz = 4.09 kN
mlt = 1.00 my = 0.49
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 1860.92 kN Mcy = 230.66 kN*m
Section class = 3 Mey = 183.30 kN*m Pvz = 669.93 kN
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

------------------------------------------------------------------------------------------------------- ---------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

Ly = 5.20 m pey = 383.54 MPa Lz = 5.20 m pez = 383.54
MPa
Ley = 10.40 m Fiy = 330.26 MPa Lez = 10.40 m Fiz = 330.26 MPa
Lamy = 73.51 py = 192.64 MPa Lamz = 73.51 pz = 192.64 MPa
ny = 0.11 Pcy = 1525.45 kN nz = 0.11 Pcz = 1525.45 kN
----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.10 < 1.00 (4.8.3.2)
Fvz/Pvz = 0.01 < 1.00 (4.2.3)
Member stability check
Fc/Pcy + (1+0.5*Fc/Pcy)*my*Mymax/Mcy = 0.09 < 1.00 (4.8.3.3.3a)
Fc/Pcz + 0.5*mlt*Mlt/Mb = 0.09 < 1.00 (4.8.3.3.3a)
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM): Not analyzed

Displacements (GLOBAL SYSTEM):

vx = 1.0 mm < vx max = L/300.00 = 17.3 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
vy = 0.0 mm < vy max = L/300.00 = 17.3 mm Verified
Governing Load Case: 3 WIND1
----------------------------------------------------------------------------------------------------------- -----------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

----------------------------------------------------------------------------------------------------------------- -----------
------------
CAPACITIES
Pc = 127.60 kN
Section class = 3
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.10 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 1 DL1
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.10 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 2 LL1
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 3 WIND1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

------------------------------------------------------------------------------------------- ---------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------- -----
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.10 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

--------------------------------------------------------------------------------------------------------------- -------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.10 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 3 WIND1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 12.12 kN
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 127.60 kN
Section class = 3
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.10 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 2 LL1
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

STEEL DESIGN
---------------------------------------------------------------------------------------------------------- ------------------
------------
CODE: British Standard BS 5950:2000
ANALYSIS TYPE: Member Verification
----------------------------------------------------------------------------------------------------------------------------
------------
CODE GROUP:
MEMBER: 2 Column-1_2 POINT: COORDINATE: x = 0.00 L =
0.00 m
----------------------------------------------------------------------------------------------------------------------------
------------
LOADS:
Governing Load Case: 14 1.2D+1.2L+1.2W1 (1+2+3)*1.20
----------------------------------------------------------------------------------------------------------------------------
------------
MATERIAL
S 235 py = 235.00 MPa E = 210000.00 MPa
----------------------------------------------------------------------------------------------------------------------------
------------
SECTION PARAMETERS: TRON 406x6.3
D=406.4 mm
Ay=4751.27 mm2 Az=4751.27 mm2 A=7918.79 mm2
t=6.3 mm Iy=158494000.00 mm4 Iz=158494000.00 mm4 Ix=316988000.00
mm4
Wely=779990.16 mm3 Welz=779990.16 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 112.18 kN My = -3.98 kN*m
Mlt = -3.98 kN*m Mymax = -3.98 kN*m Fvz = 1.77 kN
mlt = 1.00 my = 0.84
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 1860.92 kN Mcy = 230.66 kN*m
Section class = 3 Mey = 183.30 kN*m Pvz = 669.93 kN
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

Ly = 5.20 m pey = 383.54 MPa Lz = 5.20 m pez = 383.54
MPa
Ley = 10.40 m Fiy = 330.26 MPa Lez = 10.40 m Fiz = 330.26 MPa
Lamy = 73.51 py = 192.64 MPa Lamz = 73.51 pz = 192.64 MPa
ny = 0.11 Pcy = 1525.45 kN nz = 0.11 Pcz = 1525.45 kN
--------------------------------------------------------------------------------------------------- -------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.08 < 1.00 (4.8.3.2)
Fvz/Pvz = 0.00 < 1.00 (4.2.3)
Member stability check
Fc/Pcy + (1+0.5*Fc/Pcy)*my*Mymax/Mcy = 0.09 < 1.00 (4.8.3.3.3a)
Fc/Pcz + 0.5*mlt*Mlt/Mb = 0.08 < 1.00 (4.8.3.3.3a)
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM): Not analyzed

Displacements (GLOBAL SYSTEM):

vx = 0.8 mm < vx max = L/300.00 = 17.3 mm Verified
Governing Load Case: 3 WIND1
vy = 0.0 mm < vy max = L/300.00 = 17.3 mm Verified
Governing Load Case: 3 WIND1
----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -10.40 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + My/Mcy = 0.09 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.09 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 3 WIND1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.07 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 2 LL1
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 2 LL1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Fc = 8.59 kN My = 0.01 kN*m
Mlt = 0.01 kN*m Mymax = 0.01 kN*m
mlt = 1.00 my = 0.95
----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pc = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc + My/Mcy = 0.07 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 8.4 mm Verified
Governing Load Case: 4 WIND2
uz = 0.1 mm < uz max = L/200.00 = 8.4 mm Verified
Governing Load Case: 1 DL1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.04 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 4 WIND2
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Fc/Pc = 0.04 < 1.00 (4.8.3.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

----------------------------------------------------------------------------------------------------------------------------
------------
CAPACITIES
Pt = 127.60 kN
Section class = 1
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt = 0.02 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 2 LL1
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

------------------------------------------------------------------------------------------------------------ ----------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

------------------------------------------------------------------------------------------------------------------ ----------
------------
CAPACITIES
Pt = 127.60 kN
Section class = 1
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt = 0.01 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 4 WIND2
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -0.60 kN My = 0.02 kN*m
Mlt = 0.02 kN*m Mymax = 0.02 kN*m
mlt = 1.00
------------------------------------------------------------------------------------------------ ----------------------------
------------
CAPACITIES
Pt = 127.60 kN Mcy = 2.28 kN*m
Section class = 1 Mey = 1.90 kN*m
----------------------------------------------------------------------------------------------------------------------------
------------

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt + My/Mcy = 0.01 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 9.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.1 mm < uz max = L/200.00 = 9.0 mm Verified
Governing Load Case: 13 D+L (1+2)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------
------------
CODE: British Standard BS 5950:2000
ANALYSIS TYPE: Member Verification
----------------------------------------------------------------------------------------------------------------------------
------------
CODE GROUP:
MEMBER: 133 Diagonal _133 POINT: COORDINATE: x = 1.00 L =
1.00 m
----------------------------------------------------------------------------------------------------------------------------
------------
LOADS:
Governing Load Case: 7 1.2D+1.6W2 1*1.20+4*1.60
----------------------------------------------------------------------------------------------------------------------------
------------
MATERIAL
S 275 py = 275.00 MPa E = 210000.00 MPa
---------------------------------------------------------------------------------------------------------- ------------------
------------
SECTION PARAMETERS: TCAR 50x2.5
D=50.0 mm
B=50.0 mm Ay=232.00 mm2 Az=232.00 mm2 A=464.00 mm2
t=2.5 mm Iy=172700.00 mm4 Iz=172700.00 mm4 Ix=260851.00
mm4
T=2.5 mm Wely=6908.00 mm3 Welz=6908.00 mm3
----------------------------------------------------------------------------------------------------------------------------
------------
INTERNAL FORCES
Ft = -1.22 kN

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt = 0.01 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 3 WIND1
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 2 LL1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt = 0.01 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 4 WIND2
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 3 WIND1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------
------------
BUCKLING PARAMETERS:

About Y axis: About Z axis:

------------------------------------------------------------------------------------------------------ ----------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt = 0.01 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
------------------------------------------------------------------------------------------------------------------ ----------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

SECTION PARAMETERS: TCAR 50x2.5

LATERAL BUCKLING PARAMETERS:

------------------------------------------------------------------------------------------------ ----------------------------
------------
BUCKLING PARAMETERS:
About Y axis: About Z axis:
----------------------------------------------------------------------------------------------------------------------------
------------
VERIFICATION FORMULAS:
Section check
Ft/Pt = 0.00 < 1.00 (4.8.2.2)
Member stability check
Not analyzed
----------------------------------------------------------------------------------------------------------------------------
------------
LIMIT DISPLACEMENTS

Deflections (LOCAL SYSTEM):

uy = 0.0 mm < uy max = L/200.00 = 5.0 mm Verified
Governing Load Case: 16 D+L+W1 (1+2+3)*1.00
uz = 0.0 mm < uz max = L/200.00 = 5.0 mm Verified
Governing Load Case: 3 WIND1

Displacements (GLOBAL SYSTEM): Not analyzed

----------------------------------------------------------------------------------------------------------------------------
------------
Section OK !!!

Autodesk Robot Structural Analysis Professional 2019

Fixed column base design

Eurocode 3: EN 1993-1-8:2005/AC:2009 + CEB Design Ratio
Guide: Design of fastenings in concrete 0.27
1.1 General
Connection no.: 1

Connection name: Fixed column base

Structure node: 1

Structure bars: 1

1.2 Geometry

1.2.1 Column
Section: TRON 355x6.3

Bar no.: 1

Lc = 5.20 [m] Column length

= 0.0 [Deg] Inclination angle

hc = 356 [mm] Height of column section

bfc = 356 [mm] Width of column section

twc = 6 [mm] Thickness of the web of column section

tfc = 6 [mm] Thickness of the flange of column section

rc = 0 [mm] Radius of column section fillet

Ac = 6913.36 [mm2] Cross-sectional area of a column

Iyc = 105472000.00 [mm4] Moment of inertia of the column section

Material: S 275
fyc = 275.00 [MPa] Resistance

fuc = 430.00 [MPa] Yield strength of a material

1.2.2 Column base

lpd = 650 [mm] Length

bpd = 650 [mm] Width

tpd = 22 [mm] Thickness

Material: S 275

fypd = 275.00 [MPa] Resistance

fupd = 430.00 [MPa] Yield strength of a material

1.2.3 Anchorage
The shear plane passes through the UNTHREADED portion of the bolt.

Class = A307 Anchor class

fyb = 248.21 [MPa] Yield strength of the anchor material

fub = 413.69 [MPa] Tensile strength of the anchor material

d= 19 [mm] Bolt diameter

2
As = 285.16 [mm ] Effective section area of a bolt

2
Av = 285.02 [mm ] Area of bolt section

nH = 2 Number of bolt columns

nV = 2 Number of bolt rows

Horizontal spacing eHi = 500 [mm]

Vertical spacing eVi = 500 [mm]

Anchor dimensions

L1 = 50 [mm]

L2 = 550 [mm]

L3 = 0 [mm]

L4 = 0 [mm]

Washer

lwd = 50 [mm] Length

bwd = 57 [mm] Width

lwd = 50 [mm] Length

twd = 10 [mm] Thickness

1.2.4 Stiffener
ls = 650 [mm] Length

ws = 650 [mm] Width

hs = 300 [mm] Height

ts = 15 [mm] Thickness

d1 = 20 [mm] Cut

d2 = 20 [mm] Cut

1.2.5 Material factors

M0 = 1.00 Partial safety factor

M2 = 1.25 Partial safety factor

C = 1.50 Partial safety factor

1.2.6 Spread footing

L= 2000 [mm] Spread footing length

B= 2000 [mm] Spread footing width

H= 600 [mm] Spread footing height

Concrete

Class C20/25

fck = 20.00 [MPa] Characteristic resistance for compression

Grout layer

tg = 30 [mm] Thickness of leveling layer (grout)

fck,g = 12.00 [MPa] Characteristic resistance for compression

Cf,d = 0.30 Coeff. of friction between the base plate and concrete

1.2.7 Welds
ap = 5 [mm] Footing plate of the column base

as = 4 [mm] Stiffeners

1.3 Loads
Case: 9: 0.9D+1.6W2 1*0.90+4*1.60

Nj,Ed = 48.26 [kN] Axial force

Vj,Ed,z = 3.21 [kN] Shear force

Mj,Ed,y = -3.60 [kN*m] Bending moment

1.4 Results

1.4.1 Tension zone

STEEL FAILURE

2
Ab = 285.16 [mm ] Effective anchor area [Table 3.4]

fub = 413.69 [MPa] Tensile strength of the anchor material [Table 3.4]

Beta = 0.85 Reduction factor of anchor resistance [3.6.1.(3)]

Ft,Rd,s1 = beta*0.9*fub*Ab/M2

Ft,Rd,s1 = 72.20 [kN] Anchor resistance to steel failure [Table 3.4]

Ms = 1.20 Partial safety factor CEB [3.2.3.2]

fyb = 248.21 [MPa] Yield strength of the anchor material CEB [9.2.2]

Ft,Rd,s2 = fyb*Ab/Ms

Ft,Rd,s2 = 58.98 [kN] Anchor resistance to steel failure CEB [9.2.2]

Ft,Rd,s = min(Ft,Rd,s1,Ft,Rd,s2)

Ft,Rd,s = 58.98 [kN] Anchor resistance to steel failure

PULL-OUT FAILURE

fck = 20.00 [MPa] Characteristic compressive strength of concrete EN 1992-1:[3.1.2]

2/3
fctd = 0.7*0.3*fck /C

fctd 1.0 [MPa EN 1992-

Design tensile resistance
= 3 ] 1:[8.4.2.(2)]

1.0 Coeff. related to the quality of the bond conditions and concreting EN 1992-
1 =
0 conditions 1:[8.4.2.(2)]

1.0 EN 1992-
2 = Coeff. related to the bar diameter
0 1:[8.4.2.(2)]

fbd = 2.25*1*2*fctd

fbd = 2.32 [MPa] Design value of the ultimate bond stress EN 1992-1:[8.4.2.(2)]

hef = 550 [mm] Effective anchorage depth EN 1992-1:[8.4.2.(2)]

Ft,Rd,p = *d*hef*fbd

Ft,Rd,p = 76.40 [kN] Design uplift capacity EN 1992-1:[8.4.2.(2)]

CONCRETE CONE FAILURE

hef = 500 [mm] Effective anchorage depth CEB [9.2.4]

0 0.5 0.5 1.5

NRk,c = 7.5[N /mm ]*fck*hef

0
NRk,c = 375.00 [kN] Characteristic resistance of an anchor CEB [9.2.4]

scr,N = 1500 [mm] Critical width of the concrete cone CEB [9.2.4]

ccr,N = 750 [mm] Critical edge distance CEB [9.2.4]

2
Ac,N0 = 4000000.00 [mm ] Maximum area of concrete cone CEB [9.2.4]

2
Ac,N = 4000000.00 [mm ] Actual area of concrete cone CEB [9.2.4]

A,N = Ac,N/Ac,N0

A,N = 1.00 Factor related to anchor spacing and edge distance CEB [9.2.4]

c= 750 [mm] Minimum edge distance from an anchor CEB [9.2.4]

s,N = 0.7 + 0.3*c/ccr.N ≤ 1.0

s,N 1. Factor taking account the influence of edges of the concrete member on the CEB
= 00 distribution of stresses in the concrete [9.2.4]

ec,N 1. CEB
Factor related to distribution of tensile forces acting on anchors
= 00 [9.2.4]

re,N = 0.5 + hef[mm]/200 ≤ 1.0

1.0
re,N = Shell spalling factor CEB [9.2.4]
0

ucr,N 1.0 Factor taking into account whether the anchorage is in cracked or non-cracked
CEB [9.2.4]
= 0 concrete

2.1 CEB
Mc = Partial safety factor
6 [3.2.3.1]

0
Ft,Rd,c = NRk,c *A,N*s,N*ec,N*re,N*ucr,N/Mc

Ft,Rd,c = 173.61 [kN] Design anchor resistance to concrete cone failure EN 1992-1:[8.4.2.(2)]

SPLITTING FAILURE

hef = 550 [mm] Effective anchorage depth CEB [9.2.5]

0 0.5 0.5 1.5

NRk,c = 7.5[N /mm ]*fck*hef

0
NRk,c = 432.63 [kN] Design uplift capacity CEB [9.2.5]
0
NRk,c = 432.63 [kN] Design uplift capacity CEB [9.2.5]

scr,N = 1100 [mm] Critical width of the concrete cone CEB [9.2.5]

ccr,N = 550 [mm] Critical edge distance CEB [9.2.5]

2
Ac,N0 = 2560000.00 [mm ] Maximum area of concrete cone CEB [9.2.5]

2
Ac,N = 2560000.00 [mm ] Actual area of concrete cone CEB [9.2.5]

A,N = Ac,N/Ac,N0

A,N = 1.00 Factor related to anchor spacing and edge distance CEB [9.2.5]

c= 550 [mm] Minimum edge distance from an anchor CEB [9.2.5]

s,N = 0.7 + 0.3*c/ccr.N ≤ 1.0

Factor taking account the influence of edges of the concrete member on CEB
s,N = 1.00
the distribution of stresses in the concrete [9.2.5]

ec,N CEB
1.00 Factor related to distribution of tensile forces acting on anchors
= [9.2.5]

re,N = 0.5 +
hef[mm]/200 ≤ 1.0

1.0 CEB
re,N = Shell spalling factor
0 [9.2.5]

ucr,N 1.0 Factor taking into account whether the anchorage is in cracked or non-cracked CEB
= 0 concrete [9.2.5]

h,N = (h/(2*hef))
2/3
≤ 1.2

h,N = 0.67 Coeff. related to the foundation height CEB [9.2.5]

M,sp = 2.16 Partial safety factor CEB [3.2.3.1]

0
Ft,Rd,sp = NRk,c *A,N*s,N*ec,N*re,N*ucr,N*h,N/M,sp

Ft,Rd,sp = 133.71 [kN] Design anchor resistance to splitting of concrete CEB [9.2.5]

TENSILE RESISTANCE OF AN ANCHOR

Ft,Rd = min(Ft,Rd,s , Ft,Rd,p , Ft,Rd,c , Ft,Rd,sp)

Ft,Rd = 58.98 [kN] Tensile resistance of an anchor

BENDING OF THE BASE PLATE

Bending moment Mj,Ed,y

leff,1 = 325 [mm] Effective length for a single bolt for mode 1 [6.2.6.5]

leff,2 = 325 [mm] Effective length for a single bolt for mode 2 [6.2.6.5]
leff,1 = 325 [mm] Effective length for a single bolt for mode 1 [6.2.6.5]

m= 170 [mm] Distance of a bolt from the stiffening edge [6.2.6.5]

Mpl,1,Rd = 10.81 [kN*m] Plastic resistance of a plate for mode 1 [6.2.4]

Mpl,2,Rd = 10.81 [kN*m] Plastic resistance of a plate for mode 2 [6.2.4]

FT,1,Rd = 254.31 [kN] Resistance of a plate for mode 1 [6.2.4]

FT,2,Rd = 124.34 [kN] Resistance of a plate for mode 2 [6.2.4]

FT,3,Rd = 117.97 [kN] Resistance of a plate for mode 3 [6.2.4]

Ft,pl,Rd,y = min(FT,1,Rd , FT,2,Rd , FT,3,Rd)

Ft,pl,Rd,y = 117.97 [kN] Tension resistance of a plate [6.2.4]

RESISTANCES OF SPREAD FOOTING IN THE TENSION ZONE

Nj,Rd = 235.93 [kN] Resistance of a spread footing for axial tension [6.2.8.3]

FT,Rd,y = Ft,pl,Rd,y

FT,Rd,y = 117.97 [kN] Resistance of a column base in the tension zone [6.2.8.3]

1.4.2 Connection capacity check

Nj,Ed / Nj,Rd ≤ 1,0 (6.24) 0.20 < 1.00 verified (0.20)

ey = 75 [mm] Axial force eccentricity [6.2.8.3]

zc,y = 141 [mm] Lever arm FC,Rd,y [6.2.8.1.(2)]

zt,y = 250 [mm] Lever arm FT,Rd,y [6.2.8.1.(3)]

Mj,Rd,y = 13.56 [kN*m] Connection resistance for bending [6.2.8.3]

Mj,Ed,y / Mj,Rd,y ≤ 1,0 (6.23) 0.27 < 1.00 verified (0.27)

1.4.3 Shear
BEARING PRESSURE OF AN ANCHOR BOLT ONTO THE BASE PLATE

Shear force Vj,Ed,z

d,z 1.1 [Table

Coeff. taking account of the bolt position - in the direction of shear
= 9 3.4]

b,z 0.9 [Table

Coeff. for resistance calculation F1,vb,Rd
= 6 3.4]

2.5 Coeff. taking account of the bolt position - perpendicularly to the direction of [Table
k1,z =
0 shear 3.4]

F1,vb,Rd,z = k1,zb,zfupdtp / M2

F1,vb,Rd,z = 346.75 [kN] Resistance of an anchor bolt for bearing pressure onto the base plate [6.2.2.(7)]

SHEAR OF AN ANCHOR BOLT

b = 0.37 Coeff. for resistance calculation F2,vb,Rd [6.2.2.(7)]

2
Avb = 285.02 [mm ] Area of bolt section [6.2.2.(7)]

fub = 413.69 [MPa] Tensile strength of the anchor material [6.2.2.(7)]

M2 = 1.25 Partial safety factor [6.2.2.(7)]

F2,vb,Rd = b*fub*Avb/M2

F2,vb,Rd = 34.48 [kN] Shear resistance of a bolt - without lever arm [6.2.2.(7)]

M = 2.00 Factor related to the fastening of an anchor in the foundation CEB [9.3.2.2]

MRk,s = 0.19 [kN*m] Characteristic bending resistance of an anchor CEB [9.3.2.2]

lsm = 51 [mm] Lever arm length CEB [9.3.2.2]

Ms = 1.20 Partial safety factor CEB [3.2.3.2]

Fv,Rd,sm = M*MRk,s/(lsm*Ms)

Fv,Rd,sm = 6.12 [kN] Shear resistance of a bolt - with lever arm CEB [9.3.1]

CONCRETE PRY-OUT FAILURE

NRk,c = 375.00 [kN] Design uplift capacity CEB [9.2.4]

k3 = 2.00 Factor related to the anchor length CEB [9.3.3]

Mc = 2.16 Partial safety factor CEB [3.2.3.1]

Fv,Rd,cp = k3*NRk,c/Mc

Fv,Rd,cp = 347.22 [kN] Concrete resistance for pry-out failure CEB [9.3.1]

CONCRETE EDGE FAILURE

Shear force Vj,Ed,z

VRk,c,z 1477 [k CEB

0 Characteristic resistance of an anchor
= .33 N] [9.3.4.(a)]

A,V,z CEB
0.36 Factor related to anchor spacing and edge distance
= [9.3.4]

h,V,z CEB
1.23 Factor related to the foundation thickness
= [9.3.4.(c)]

s,V,z CEB
0.90 Factor related to the influence of edges parallel to the shear load direction
= [9.3.4.(d)]

1.00
ec,V,z Factor taking account a group effect when different shear loads are acting on CEB
Shear force Vj,Ed,z

VRk,c,z 1477 [k CEB

0 Characteristic resistance of an anchor
= .33 N] [9.3.4.(a)]

= the individual anchors in a group [9.3.4.(e)]

,V,z CEB
1.00 Factor related to the angle at which the shear load is applied
= [9.3.4.(f)]

ucr,V, CEB
1.00 Factor related to the type of edge reinforcement used
z = [9.3.4.(g)]

CEB
Mc = 2.16 Partial safety factor
[3.2.3.1]

0
Fv,Rd,c,z = VRk,c,z *A,V,z*h,V,z*s,V,z*ec,V,z*,V,z*ucr,V,z/Mc

Fv,Rd,c,z = 269.88 [kN] Concrete resistance for edge failure CEB [9.3.1]

SPLITTING RESISTANCE

Cf,d = 0.30 Coeff. of friction between the base plate and concrete [6.2.2.(6)]

Nc,Ed = 0.00 [kN] Compressive force [6.2.2.(6)]

Ff,Rd = Cf,d*Nc,Ed

Ff,Rd = 0.00 [kN] Slip resistance [6.2.2.(6)]

SHEAR CHECK

Vj,Rd,z = nb*min(F1,vb,Rd,z, F2,vb,Rd, Fv,Rd,sm, Fv,Rd,cp, Fv,Rd,c,z) + Ff,Rd

Vj,Rd,z = 24.49 [kN] Connection resistance for shear CEB [9.3.1]

Vj,Ed,z / Vj,Rd,z ≤ 1,0 0.13 < 1.00 verified (0.13)

1.4.4 Stiffener check

Stiffener parallel to the Z axis (passing through the tube center)

M1 [kN*
2.26 Bending moment acting on a stiffener
= m]

Q1
31.33 [kN] Shear force acting on a stiffener
=

zs = 50 [mm] Location of the neutral axis (from the plate base)

123051040 [mm4
Is = Moment of inertia of a stiffener
.60 ]

d [MPa Normal stress on the contact surface between stiffener EN 1993-1-

0.51
= ] and plate 1:[6.2.1.(5)]

5.01 Normal stress in upper fibers

g [MPa EN 1993-1-
M1 [kN*
2.26 Bending moment acting on a stiffener
= m]

= ] 1:[6.2.1.(5)]

[MPa EN 1993-1-
= 6.96 Tangent stress in a stiffener
] 1:[6.2.1.(5)]

z [MPa Equivalent stress on the contact surface between stiffener EN 1993-1-

12.07
= ] and plate 1:[6.2.1.(5)]

max (g,  / (0.58), z ) / (fyp/M0) ≤ 1.0 verifi (0.0

0.04 < 1.00
(6.1) ed 4)

Stiffener parallel to the Y axis (passing through the tube center)

M1 [kN*
1.13 Bending moment acting on a stiffener
= m]

Q1
15.66 [kN] Shear force acting on a stiffener
=

zs = 50 [mm] Location of the neutral axis (from the plate base)

123051040 [mm4
Is = Moment of inertia of a stiffener
.60 ]

d [MPa Normal stress on the contact surface between stiffener EN 1993-1-

0.25
= ] and plate 1:[6.2.1.(5)]

g [MPa EN 1993-1-
2.50 Normal stress in upper fibers
= ] 1:[6.2.1.(5)]

[MPa EN 1993-1-
= 3.48 Tangent stress in a stiffener
] 1:[6.2.1.(5)]

z [MPa Equivalent stress on the contact surface between stiffener EN 1993-1-

6.03
= ] and plate 1:[6.2.1.(5)]

max (g,  / (0.58), z ) / (fyp/M0) ≤ 1.0 verifi (0.0

0.02 < 1.00
(6.1) ed 2)

1.4.5 Welds between the column and the base plate

 = 3.81 [MPa] Normal stress in a weld [4.5.3.(7)]

 = 3.81 [MPa] Perpendicular tangent stress [4.5.3.(7)]

yII = -0.00 [MPa] Tangent stress parallel to Vj,Ed,y [4.5.3.(7)]

zII = 0.36 [MPa] Tangent stress parallel to Vj,Ed,z [4.5.3.(7)]

W = 0.85 Resistance-dependent coefficient [4.5.3.(7)]

 / (0.9*fu/M2)) ≤ 1.0 (4.1) 0.01 < 1.00 verified (0.01)

( + 3.0 (yII +  )) / (fu/(W*M2))) ≤ 1.0 (4.1) 0.02 < 1.00

2 2 2
verified (0.02)
 / (0.9*fu/M2)) ≤ 1.0 (4.1) 0.01 < 1.00 verified (0.01)

( + 3.0 (zII +  )) / (fu/(W*M2))) ≤ 1.0 (4.1) 0.02 < 1.00

2 2 2
verified (0.02)

1.4.6 Vertical welds of stiffeners

Stiffener parallel to the Z axis (passing through the tube center)

 = 0.00 [MPa] Normal stress in a weld [4.5.3.(7)]

 = 0.00 [MPa] Perpendicular tangent stress [4.5.3.(7)]

II = 6.53 [MPa] Parallel tangent stress [4.5.3.(7)]

z = 0.00 [MPa] Total equivalent stress [4.5.3.(7)]

W = 0.85 Resistance-dependent coefficient [4.5.3.(7)]

max (, II * 3, z) / (fu/(W*M2)) ≤ 1.0 (4.1) 0.03 < 1.00 verified (0.03)

Stiffener parallel to the Y axis (passing through the tube center)

 = 0.00 [MPa] Normal stress in a weld [4.5.3.(7)]

 = 0.00 [MPa] Perpendicular tangent stress [4.5.3.(7)]

II = 3.26 [MPa] Parallel tangent stress [4.5.3.(7)]

z = 0.00 [MPa] Total equivalent stress [4.5.3.(7)]

W = 0.85 Resistance-dependent coefficient [4.5.3.(7)]

max (, II * 3, z) / (fu/(W*M2)) ≤ 1.0 (4.1) 0.01 < 1.00 verified (0.01)

1.4.7 Transversal welds of stiffeners

Stiffener parallel to the Z axis (passing through the tube center)

 = 18.81 [MPa] Normal stress in a weld [4.5.3.(7)]

 = 18.81 [MPa] Perpendicular tangent stress [4.5.3.(7)]

II = 17.54 [MPa] Parallel tangent stress [4.5.3.(7)]

z = 48.36 [MPa] Total equivalent stress [4.5.3.(7)]

W = 0.85 Resistance-dependent coefficient [4.5.3.(7)]

max (, II * 3, z) / (fu/(W*M2)) ≤ 1.0 (4.1) 0.12 < 1.00 verified (0.12)

Stiffener parallel to the Y axis (passing through the tube center)

 = 9.41 [MPa] Normal stress in a weld [4.5.3.(7)]

 = 9.41 [MPa] Perpendicular tangent stress [4.5.3.(7)]

Stiffener parallel to the Y axis (passing through the tube center)

 = 9.41 [MPa] Normal stress in a weld [4.5.3.(7)]

II = 9.13 [MPa] Parallel tangent stress [4.5.3.(7)]

z = 24.58 [MPa] Total equivalent stress [4.5.3.(7)]

W = 0.85 Resistance-dependent coefficient [4.5.3.(7)]

max (, II * 3, z) / (fu/(W*M2)) ≤ 1.0 (4.1) 0.06 < 1.00 verified (0.06)

1.4.8 Connection stiffness

Bending moment Mj,Ed,y

beff = 108 [mm] Effective width of the bearing pressure zone under the flange [6.2.5.(3)]

leff = 457 [mm] Effective length of the bearing pressure zone under the flange [6.2.5.(3)]

k13,y = Ec*(beff*leff)/(1.275*E)

k13,y = 25 [mm] Stiffness coeff. of compressed concrete [Table 6.11]

leff = 325 [mm] Effective length for a single bolt for mode 2 [6.2.6.5]

m= 170 [mm] Distance of a bolt from the stiffening edge [6.2.6.5]

3 3
k15,y = 0.850*leff*tp /(m )

k15,y = 1 [mm] Stiffness coeff. of the base plate subjected to tension [Table 6.11]

Lb = 224 [mm] Effective anchorage depth [Table 6.11]

k16,y = 1.6*Ab/Lb

k16,y = 2 [mm] Stiffness coeff. of an anchor subjected to tension [Table 6.11]

0,y = 0.48 Column slenderness [5.2.2.5.(2)]

Sj,ini,y = 12131.07 [kN*m] Initial rotational stiffness [Table 6.12]

Sj,rig,y = 127783.38 [kN*m] Stiffness of a rigid connection [5.2.2.5]

Sj,ini,y < Sj,rig,y SEMI-RIGID [5.2.2.5.(2)]

1.4.9 Weakest component:

ANCHOR BOLT - RUPTURE

1.5 Remarks
Anchor curvature radius is too small. 0 [mm] < 57 [mm]

Segment L4 of the hook anchor is too short. 0 [mm] < 95 [mm]

Connection conforms to the code Ratio 0.27

Hourglass Workout Program by Luisagiuliet 2
76% (21)
Hourglass Workout Program by Luisagiuliet 2
51 pages
12 Week Program: Summer Body Starts Now
87% (46)
12 Week Program: Summer Body Starts Now
70 pages
Read People Like A Book by Patrick King-Edited
58% (81)
Read People Like A Book by Patrick King-Edited
12 pages
Livingood, Blake - Livingood Daily Your 21-Day Guide To Experience Real Health
77% (13)
Livingood, Blake - Livingood Daily Your 21-Day Guide To Experience Real Health
260 pages
Cheat Code To The Universe
94% (79)
Cheat Code To The Universe
34 pages
Facial Gains Guide (001 081)
91% (45)
Facial Gains Guide (001 081)
81 pages
Curse of Strahd
95% (467)
Curse of Strahd
258 pages
The Psychiatric Interview - Daniel Carlat
91% (34)
The Psychiatric Interview - Daniel Carlat
473 pages
The Borax Conspiracy
91% (57)
The Borax Conspiracy
14 pages
The Secret Language of Attraction
86% (107)
The Secret Language of Attraction
278 pages
How To Develop and Write A Grant Proposal
83% (542)
How To Develop and Write A Grant Proposal
17 pages
Penis Enlargement Secret
60% (124)
Penis Enlargement Secret
12 pages
Workbook For The Body Keeps The Score
89% (53)
Workbook For The Body Keeps The Score
111 pages
Donald Trump & Jeffrey Epstein Rape Lawsuit and Affidavits
83% (1016)
Donald Trump & Jeffrey Epstein Rape Lawsuit and Affidavits
13 pages
KamaSutra Positions
78% (69)
KamaSutra Positions
55 pages
7 Hermetic Principles
93% (30)
7 Hermetic Principles
3 pages
27 Feedback Mechanisms Pogil Key
77% (13)
27 Feedback Mechanisms Pogil Key
6 pages
Frank Hammond - List of Demons
92% (92)
Frank Hammond - List of Demons
3 pages
Phone Codes
79% (28)
Phone Codes
5 pages
36 Questions That Lead To Love
91% (35)
36 Questions That Lead To Love
3 pages
How 2 Setup Trust
97% (307)
How 2 Setup Trust
3 pages
The 36 Questions That Lead To Love - The New York Times
94% (34)
The 36 Questions That Lead To Love - The New York Times
3 pages
100 Questions To Ask Your Partner
78% (36)
100 Questions To Ask Your Partner
2 pages
Satanic Calendar
25% (56)
Satanic Calendar
4 pages
The 36 Questions That Lead To Love - The New York Times
95% (21)
The 36 Questions That Lead To Love - The New York Times
3 pages
14 Easiest & Hardest Muscles To Build (Ranked With Solutions)
100% (8)
14 Easiest & Hardest Muscles To Build (Ranked With Solutions)
27 pages
Jeffrey Epstein39s Little Black Book Unredacted PDF
75% (12)
Jeffrey Epstein39s Little Black Book Unredacted PDF
95 pages
1001 Songs
69% (72)
1001 Songs
1,798 pages
The 4 Hour Workweek, Expanded and Updated by Timothy Ferriss - Excerpt
23% (954)
The 4 Hour Workweek, Expanded and Updated by Timothy Ferriss - Excerpt
38 pages
Zodiac Sign & Their Most Common Addictions
63% (30)
Zodiac Sign & Their Most Common Addictions
9 pages
Eas105 Lab Report 2
No ratings yet
Eas105 Lab Report 2
16 pages
AUTOFLIGHT
No ratings yet
AUTOFLIGHT
17 pages
EN 1993-1:2005/AC:2009, Eurocode 3: Design of Steel Structures
No ratings yet
EN 1993-1:2005/AC:2009, Eurocode 3: Design of Steel Structures
52 pages
Mbajtesi Kryesor, Prerjet Kritike
No ratings yet
Mbajtesi Kryesor, Prerjet Kritike
4 pages
STEEL DESIGN CALCULATION SHEET - USING AUTODESK ROBOT
No ratings yet
STEEL DESIGN CALCULATION SHEET - USING AUTODESK ROBOT
25 pages
EC3 Example Report
No ratings yet
EC3 Example Report
10 pages
Steel Design: Code: Analysis Type
No ratings yet
Steel Design: Code: Analysis Type
2 pages
Dimension I Mi
No ratings yet
Dimension I Mi
8 pages
EN 1993-1:2005/A1:2014, Eurocode 3: Design of Steel Structures
No ratings yet
EN 1993-1:2005/A1:2014, Eurocode 3: Design of Steel Structures
2 pages
2810 Bracket Design Report
No ratings yet
2810 Bracket Design Report
12 pages
Pos Fs - Calc Note
No ratings yet
Pos Fs - Calc Note
2 pages
Dijagonala2 Max
No ratings yet
Dijagonala2 Max
2 pages
03 300x300x118 Beam
No ratings yet
03 300x300x118 Beam
4 pages
Buckling
No ratings yet
Buckling
16 pages
LC Purlin
No ratings yet
LC Purlin
9 pages
RD Res
No ratings yet
RD Res
238 pages
Structural Analysis - Boyet Res
No ratings yet
Structural Analysis - Boyet Res
8 pages
Pacs Tugas Structural Analysis
No ratings yet
Pacs Tugas Structural Analysis
45 pages
MG Structural Analysis
No ratings yet
MG Structural Analysis
45 pages
Izračun Konzole Fermentora
No ratings yet
Izračun Konzole Fermentora
17 pages
Steel Design Detail
No ratings yet
Steel Design Detail
2,471 pages
14 03 Flexural Buckling EC3
No ratings yet
14 03 Flexural Buckling EC3
37 pages
DPGN
No ratings yet
DPGN
2 pages
1 (DL1) )
No ratings yet
1 (DL1) )
10 pages
Steel 2D Analysis & Design (EN1993)
No ratings yet
Steel 2D Analysis & Design (EN1993)
4 pages
EN 1993-1:2005/AC:2009, Eurocode 3: Design of Steel Structures
No ratings yet
EN 1993-1:2005/AC:2009, Eurocode 3: Design of Steel Structures
3 pages
05 - Calculation Design Report
No ratings yet
05 - Calculation Design Report
88 pages
Brandon
No ratings yet
Brandon
11 pages
CHECKSTEEL
No ratings yet
CHECKSTEEL
5 pages
Jaessan Est5apia Mapoy Structural Analysis
No ratings yet
Jaessan Est5apia Mapoy Structural Analysis
26 pages
Louver Calculation
100% (1)
Louver Calculation
3 pages
Section Properties: 30-May-16 30-May-2016 18:01 Str2.std
No ratings yet
Section Properties: 30-May-16 30-May-2016 18:01 Str2.std
9 pages
Calculation Sheet PDF
No ratings yet
Calculation Sheet PDF
32 pages
Design Spreadsheets A1PS
No ratings yet
Design Spreadsheets A1PS
11 pages
Roof Truss (Waren
No ratings yet
Roof Truss (Waren
29 pages
Pbsk345 - Steel Report
No ratings yet
Pbsk345 - Steel Report
2 pages
STEEL Design Project GRP4
100% (1)
STEEL Design Project GRP4
20 pages
Truss Design
No ratings yet
Truss Design
38 pages
Lifting Calculation
No ratings yet
Lifting Calculation
7 pages
EN 1993-1:2005/A1:2014, Eurocode 3: Design of Steel Structures
No ratings yet
EN 1993-1:2005/A1:2014, Eurocode 3: Design of Steel Structures
2 pages
Job Information: SW-AREC-CAL-C-0818-01-Rev - 00-PBW
No ratings yet
Job Information: SW-AREC-CAL-C-0818-01-Rev - 00-PBW
8 pages
TRUSS EXAMPLE
No ratings yet
TRUSS EXAMPLE
11 pages
Sample Steel Beam Design
No ratings yet
Sample Steel Beam Design
6 pages
Steel Truss Calculation
No ratings yet
Steel Truss Calculation
15 pages
Design of Purlins
No ratings yet
Design of Purlins
10 pages
2d Malaci
No ratings yet
2d Malaci
18 pages
Ms Beams Columns Col. Bases.
No ratings yet
Ms Beams Columns Col. Bases.
28 pages
Jepretan Layar 2022-11-26 Pada 15.30.03
No ratings yet
Jepretan Layar 2022-11-26 Pada 15.30.03
37 pages
Final Design Report
No ratings yet
Final Design Report
95 pages
Canopy Hanger
No ratings yet
Canopy Hanger
1 page
Steel BS Parameter PDF
No ratings yet
Steel BS Parameter PDF
8 pages
Calculation Note
No ratings yet
Calculation Note
10 pages
Steel Design:Truss 1: British Standard BS 5950:2000
No ratings yet
Steel Design:Truss 1: British Standard BS 5950:2000
3 pages
Portal Frame - Full Calc Note
No ratings yet
Portal Frame - Full Calc Note
5 pages
29-May-16 07-Dec-2019 21:18 Mast - STD: Job No Sheet No Rev
No ratings yet
29-May-16 07-Dec-2019 21:18 Mast - STD: Job No Sheet No Rev
33 pages
Deck Composite Box Girder MLG 00
No ratings yet
Deck Composite Box Girder MLG 00
493 pages
toolkit
No ratings yet
toolkit
1 page
Farm STR Project
No ratings yet
Farm STR Project
17 pages
GPGN
No ratings yet
GPGN
3 pages
Steel Design (Track 2) Beam 2 Check 1: Job No Sheet No Rev
No ratings yet
Steel Design (Track 2) Beam 2 Check 1: Job No Sheet No Rev
1 page
Advanced Electric Drives: Analysis, Control, and Modeling Using MATLAB / Simulink
From Everand
Advanced Electric Drives: Analysis, Control, and Modeling Using MATLAB / Simulink
Ned Mohan
No ratings yet
ISA Certified Automation Professional (CAP) Associate: Certification Exam Prep: 500 Practice Exam Questions and Explanations
From Everand
ISA Certified Automation Professional (CAP) Associate: Certification Exam Prep: 500 Practice Exam Questions and Explanations
Steve Brown
No ratings yet
Chccom005 Uao V2 2 17042020
No ratings yet
Chccom005 Uao V2 2 17042020
6 pages
Steel Wire, Deformed, Stress-Relieved or Low-Relaxation For Prestressed Concrete Railroad Ties
No ratings yet
Steel Wire, Deformed, Stress-Relieved or Low-Relaxation For Prestressed Concrete Railroad Ties
3 pages
Premature Fatigue Failure of A Spring Due To Quench Cracks
No ratings yet
Premature Fatigue Failure of A Spring Due To Quench Cracks
8 pages
Full Download McGraw-Hill Education Conquering GRE Math, 4th Edition Robert E. Moyer PDF DOCX
100% (3)
Full Download McGraw-Hill Education Conquering GRE Math, 4th Edition Robert E. Moyer PDF DOCX
40 pages
Bronica Ec
No ratings yet
Bronica Ec
42 pages
Unit 6 Seen & Heard: Part A Grammar and Vocabulary
100% (1)
Unit 6 Seen & Heard: Part A Grammar and Vocabulary
5 pages
Updated CV Hrithik Mhatre
No ratings yet
Updated CV Hrithik Mhatre
2 pages
DCG 142013 34-35 Masterys15-80 PDF
No ratings yet
DCG 142013 34-35 Masterys15-80 PDF
2 pages
607 Module 1 - TASK 1 - ORTHOPEDIC IMPAIRMENTS Physical Disabilities
No ratings yet
607 Module 1 - TASK 1 - ORTHOPEDIC IMPAIRMENTS Physical Disabilities
3 pages
Cerrado Verde PFS 05122022
No ratings yet
Cerrado Verde PFS 05122022
314 pages
Foraging Behavior of Mexican Mojarra Amphilophus Istlanus
No ratings yet
Foraging Behavior of Mexican Mojarra Amphilophus Istlanus
9 pages
Everstrong Pajo STP
No ratings yet
Everstrong Pajo STP
6 pages
Rubric For Science Exhibit
No ratings yet
Rubric For Science Exhibit
1 page
Sandok
No ratings yet
Sandok
1 page
KTH Thesis Latex Template
100% (2)
KTH Thesis Latex Template
8 pages
Effect of Sawdust Filler With Kevlarbasalt Fiber On The Mechanical
No ratings yet
Effect of Sawdust Filler With Kevlarbasalt Fiber On The Mechanical
6 pages
Forensic Pathology Fall 2014
No ratings yet
Forensic Pathology Fall 2014
62 pages
Mander_ 2011_ Stress-Block parameters for unconfined & confined concrete based on unified stress-strain model
No ratings yet
Mander_ 2011_ Stress-Block parameters for unconfined & confined concrete based on unified stress-strain model
4 pages
Architectural Research Method
No ratings yet
Architectural Research Method
18 pages
L5 in Management and Leadership Factsheet
No ratings yet
L5 in Management and Leadership Factsheet
6 pages
PHD Thesis On Genetic Algorithm
100% (2)
PHD Thesis On Genetic Algorithm
5 pages
Project 1
No ratings yet
Project 1
2 pages
***** Đề Chính Thức: Họ tên thí sinh - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Lớp: - - - - - - -
No ratings yet
***** Đề Chính Thức: Họ tên thí sinh - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Lớp: - - - - - - -
18 pages
Marking Scheme
No ratings yet
Marking Scheme
7 pages
High Voltage Detector
No ratings yet
High Voltage Detector
1 page
Chemfig: A Tex Package For Drawing Molecules
No ratings yet
Chemfig: A Tex Package For Drawing Molecules
89 pages
Theoretical
No ratings yet
Theoretical
44 pages
[Ebooks PDF] download (Ebook) Biomeasurement : a student's guide to biological statistics by Dawn Hawkins ISBN 9780199219995, 0199219990 full chapters
100% (3)
[Ebooks PDF] download (Ebook) Biomeasurement : a student's guide to biological statistics by Dawn Hawkins ISBN 9780199219995, 0199219990 full chapters
81 pages