Model: APE4518R14v06

DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-2690-
65/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 10-Port 2L3H Antenna with 5 Integrated RCUs – 2.0 m

Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2) 1427–2200 (b1)
Frequency range (MHz)
690–803 790–862 824–894 880–960 1427–1518 1695–1990 1920–2200
Polarization +45°, –45° +45°, –45°
Electrical downtilt (°) 0–10, continuously adjustable, each band separately 2–12, continuously adjustable
At mid tilt 14.8 15.4 15.7 16.0 16.0 17.3 17.4
Gain (dBi)
Over all tilts 14.7±0.4 15.3±0.4 15.5±0.3 15.8±0.4 15.8±0.6 17.2±0.4 17.3±0.5
Side lobe suppression for first
> 17 > 17 > 17 > 17 > 15 > 16 > 16
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 70±5 69±4 68±3 64±4 63±7 64±7 65±6
Vertical 3 dB beam width (°) 11.0±0.8 9.8±0.5 9.5±0.5 8.8±0.5 7.9±0.3 6.3±0.5 5.8±0.4
VSWR < 1.5 < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28 ≥ 28
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25 > 25 > 27 > 27
Cross polar ratio, 0° (dB) > 20 > 20 > 20 > 21 > 16 > 18 > 18
Efficiency (dB) –1.31±0.25 –1.37±0.25 –1.43±0.25 –1.55±0.30 –1.37±0.25 –1.49±0.30 –1.61±0.30
Efficiency average (%) 74 73 72 70 73 71 69
Max. effective power per port (W) 500 (at 50℃ ambient temperature)* 300 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

Electrical Properties
2 x (1695–2690) (Ly1/Ry2)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 17.0 17.5 17.6 18.0
Gain (dBi)
Over all tilts 16.9±0.6 17.4±0.5 17.5±0.5 17.9±0.5
Side lobe suppression for first
> 18 > 19 > 19 > 18
side lobe above main beam (dB)
Horizontal 3 dB beam width (°) 63±6 61±6 60±6 60±6
Vertical 3 dB beam width (°) 7.4±0.7 6.6±0.6 5.8±0.3 5.3±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 25 > 27 > 27 > 27
Cross polar ratio, 0° (dB) > 18 > 18 > 17 > 18
Efficiency (dB) –1.49±0.30 –1.61±0.30 –1.80±0.30 –1.87±0.30
Efficiency average (%) 71 69 66 65
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet is available in XML format.

1
 Model: APE4518R14v06
DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-2690-
65/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 10-Port 2L3H Antenna with 5 Integrated RCUs – 2.0 m

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 469 x 206

(506)
Packing dimensions (H x W x D) (mm) 2255 x 535 x 285
Antenna weight (kg) 38.9
Antenna packing weight (kg) 60.5 (Including clamps)
Radome material Fiberglass
Radome colour Light grey

1999
Operational temperature (℃) –40 to +65

1420
Connector 10 x 4.3-10 Female
Connector position Bottom
Frontal: 568 (at 150 km/h)
Wind load (N) Lateral: 436 (at 150 km/h)
Maximum: 744 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

73
Unit: mm
Windload Polar Chart

Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–12° 3.1 kg 1 (Separate packing)

Pattern Sample for Reference

690–960 MHz 1427–2200 MHz 1695–2690 MHz

(Lr1/Rr2) (b1) (Ly1/Ry2)

2
 Model: APE4518R14v06
DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-2690-
65/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 10-Port 2L3H Antenna with 5 Integrated RCUs – 2.0 m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.7 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety–Equipment installed outdoor), EN 55032 (Emission),

EN/IEC 62368-1(Safety), ETSI EN 301 489, ICES-003
Certification: CE, IC, RCM, RoHS, REACH, WEEE

Port and Array Layout

5–6 9–10
7–8

1–2 3–4 y1 b1 y2
r1 r2
L: Left array r: Red b: Blue
R: Right array y: Yellow

Port Array Freq(MHz) RET S/N

1–2 Lr1 690–960 HWxxxx……Lr1

3–4 Rr2 690–960 HWxxxx……Rr2

5–6 b1 1427–2200 HWxxxx……..b1

7–8 Ly1 1695–2690 HWxxxx……Ly1

9–10 Ry2 1695–2690 HWxxxx……Ry2

NOTE

1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. Huawei's standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna

3 Issue: 2023–12–11