Scribd
Upload
20 views

Release Notes XS6650HD

Uploaded by

yebeltalgecho687
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

Release Notes XS6650HD

Uploaded by

yebeltalgecho687
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Software Release Note XS6650HD

Software Upgrade instructions: Download the software file which should have file extension .BIN
Copy the software file to USB and connect USB to finder.

Power Off the finder by the power switch, press and hold torch-light key and power On the finder,
Display will show list of available softwares in USB device, select the correct version of the software and press OK to start
the upgrade process, and wait for it to be get completed.
Warning: Never power OFF the finder while its being upgrade !

Version 4.35
Release Date 22-12-2020
Model Xcruiser XS6650HD Finder
Boot Loader 2.10

Serial Improvements and Changes Remarks


Keypad tones added, while in MAIN MENU press the Menu key to turn on/off the buzzer, a small
1 Added
icon will be visible at the top-left corner
Menu => Find => Press OK on satellite to open signal zoom, now you can press LEFT/RIGHT keys
2 Added
to change the transponders
3 Scrolling speed has been improved drastically Improved

Menu => Spectrum Analyzer will remember the last used settings,
4 Pointer line color has been changed to RED, Improved
text renamed from LO to LNB FREQ and predefined frequencies added

Menu => Find => Motor => Change to D1.2 and press OK will open the DiSEqC 1.2 Settings and if
5 Improved
set to D1.3 and press OK will open the Longitude, Latitude settings

6 Menu => Find => Editing TP will start from polarity, V/H Improved

7 Menu => SAT Check will remember the last used settings Improved

Menu => Setting => USB Storage => Backup, while backing up the settings to USB progress bar
8 Improved
added to show the progress in percentage

Menu => Sat Check => Auto Check => Select Satellite and Start the Auto Check, if found any
9 Added
satellite will show the Signal Strength and Quality, press Left/Right to change the transponder

NOTE: After Installing the Softwar do the factory reset from


MENU => SETTINGS => FACTORY RESET otherwise the Satellite will be empty

You might also like