DD-118HF

Large Asphalt Compactors

Moving the
World Forward
Experience the power of productivity
The Ingersoll Rand DD-118HF is a 12-tonnes, 78-inch drum, high-frequency hot mix asphalt
compactor. The high-frequency design allows for faster rolling speeds to deliver maximum
productivity and keep up with today’s faster paving speeds. Designed with Ingersoll Rand
exclusive 8-amplitude technology, the DD-118HF fine-tunes drum energy for differing
materials and changing conditions.

MODEL DD-118HF
MACHINE WEIGHTS W/ ROPS / FOPS
Operating Weight (CECE) – lb (kg) 27,670 (12548)
Weight @ Front Drum – lb (kg) 14,545 (6596)
Weight @ Rear Drum – lb (kg) 13,125 (5952)
Shipping Weight – lb (kg) 26,100 (11836)
MACHINE DIMENSIONS
Length – in (mm) 236 (5995)
Width – in (mm) 87 (2210) PERFORMANCE FEATURES
Height — Top Of Steering Wheel – in (mm) 93.4 (2372) ■
Complete access to engine compartment through
Height — Top Of ROPS / FOPS – in (mm) 124.4 (3160)
Drum Base – in (mm) 139.8 (3550) rear-hinged, 1-piece composite engine hood
Curb Clearance – in (mm) 20 (510)
■
Constant 3,400 vpm setting allows high, predictable
Inside Turning Radius (to drum edge) – in (mm) 148.5 (3772) rolling speeds
■
Eccentric rotation automatically matches direction of
DRUM
Width – in (mm) 78.7 (2000) travel, improving smoothness
Diameter – in (mm) 55.1 (1400)
■
Exclusive machined drums with chamfered, radiused
Shell Thickness (nominal) – in (mm) 0.78 (20) drum edges minimize drum edge marking
Finish Machined surface; chamfered & radiused edges ■
Industry-leading centrifugal force of 42,680 lb for
VIBRATION maximum compaction effort
Frequency – vpm (Hz) 3,400 (56.67)
■
ONE METER BY ONE METER visibility around the unit
Nominal Amplitude – in (mm) High 0.025 (0.63)
■
Patented Impact Spacing Meter provides operator with
Low 0.013 (0.34) a visual reference for speed control to maintain proper
Centrifugal Force – lb (kN) High 42,680 (190) impact spacing, resulting in consistent smoothness
Low 22,980 (102) ■
Premium shock- and vibration-isolated operator platform
PROPULSION and ROPS / FOPS, with 5-position swivel console
Type Closed-loop hydrostatic, parallel circuit to both drums ■
ROPS / FOPS support legs positioned for unobstructed
Drum Drive Heavy-duty radial piston LSHT motors; 2-speed rear motor side visibility; operator seat furnished with safety belt
Travel Speed – mph (km/h) High 0 – 6.6 (0 – 10.6) and seat contact switch
Low 0 – 5 (0 – 8) ■
SMART start drum vibration system — vibration
ENGINE initiates with lead drum, followed by trailing drum for
Make / Model Cummins B3.9-C125 compaction efficiency
Engine Type Turbocharged & charge air-cooled 4-cylinder ■
Superior drum spray system to maintain maximum
Rated Power @ 2,200 rpm – hp (kW) 125 (93.2) productivity
Electrical 12 V DC, negative ground; 95 A alternator – 10 spray nozzles on each spray bar, more closely
BRAKES spaced for better drum coverage
Service Dynamic hydrostatic through propulsion system – Dual drum wipers as standard equipment
Parking / Secondary SAHR on front-drum & rear-drum drive motors – Independent primary and secondary spray systems
WATER SYSTEM – Variable waterflow control to conserve water
Type Pressure spray drum wetting system with LDPE water tanks
Pumps Diaphragm water pumps, primary & secondary for each drum AVAILABLE OPTIONS
Spray Bars Primary & secondary spray bars for each drum ■
Back-up alarm ■
Infrared pavement surface
Nozzles Hand-serviceable fan spray nozzles; 10 per spray bar ■
Cocoa mats temperature sensor
Filtration Sock strainer each tank; primary water filter each pump, fine filter each nozzle ■
Engine air pre-cleaner ■
Maintenance package
Drum Wipers Front & rear rubber wipers for each drum ■
Engine grid heater ■
Strobe light
Water Tank Capacity – gal (L) 328 (1241)
■
Front and rear halogen ■
Urethane wipers
MISCELLANEOUS
work lights ■
Winterization kit
Articulation Angle (center pivot steering) + / - 40°
Oscillation Angle + / - 10°
■
Fuel strainer
Fuel Tank Capacity – gal (L) 53 (201)
■
High Intensity Discharge
Hydraulic Oil Capacity – gal (L) 30.8 (116.6) (HID) lighting with drum
Gradeability (theoretical) 36% edge lighting
Product improvement is a continuing goal at Ingersoll Rand. Designs and specifications are subject to change
without notice or obligation.

OPERATING COMFORT AND CONTROL

Ergonomic design of switches and controls
promotes smooth and efficient operation.
Lighted instrumentation makes evening
and nighttime work easier.
Swivel console places controls within (877) IR BRAND • ingersollrand.com
optimum reach. As part of the operator
platform, a 5-position swivel console
optimizes operator performance. © 2007 Ingersoll-Rand Company 15-0022