DTD113EK / DTD113ES

Transistors

500mA / 50V Digital transistors

(with built-in resistors)
DTD113EK / DTD113ES
zApplications zExternal dimensions (Unit : mm)
Inverter, Interface, Driver
2.9 1.1
DTD113EK
0.4 0.8
zFeatures
1) Built-in bias resistors enable the configuration of an (3)

inverter circuit without connecting external input

2.8
1.6
resistors (see equivalent circuit).
2) The bias resistors consist of thin-film resistors with (2) (1)

0.3Min.
0.95 0.95
complete isolation to allow negative biasing of the 0.15
1.9 (1) GND
input. They also have the advantage of almost Each lead has same dimension
ROHM : SMT3 (2) IN
completely eliminating parasitic effects. EIAJ : SC-59
Abbreviated symbol : F21
(3) OUT
3) Only the on / off conditions need to be set for
operation, making the device design easy. DTD113ES 4.0 2.0

zStructure 3.0

3Min.
NPN epitaxial planar silicon transistor
(15Min.)

(Resistor built-in type) 0.45

zPackage specifications 2.5 0.5 0.45

5.0 (1) GND
Package SMT3 SPT
ROHM : SPT (1) (2) (3) (2) OUT
Packaging type Taping Taping EIAJ : SC-72 Abbreviated symbol : D113ES (3) IN

Code T146 TP
Part No. Basic ordering unit (pieces) 3000 5000
DTD113EK −
DTD113ES −

zAbsolute maximum ratings (Ta=25°C) zEquivalent circuit

Limits
Parameter Symbol Unit
DTD113EK DTD113ES R1 OUT
IN
Supply voltage VCC 50 V
R2
Input voltage VIN −10 to +10 V
Output current IC 500 mA GND

Power dissipation Pd 200 300 mW

IN OUT
Junction temperature Tj 150 C
Storage temperature Tstg −55 to +150 C GND

R1=R2=1.0kΩ

Rev.B 1/2
 DTD113EK / DTD113ES
Transistors

zElectrical characteristics (Ta=25°C)

Parameter Symbol Min. Typ. Max. Unit Conditions
VI(off) − − 0.5 VCC=5V, IO=100µA
Input voltage V
VI(on) 3 − − VO=0.3V, IO=20mA
Output voltage VO(on) − 0.1 0.3 V IO/II=50mA/2.5mA
Input current II − − 7.2 mA VI=5V
Output current IO(off) − − 0.5 µA VCC=50V, VI=0V
DC current gain GI 33 − − − VO=5V, IO=50mA
Input resistance R1 0.7 1 1.3 kΩ −
Resistance ratio R2/R1 0.8 1 1.2 − −
Transition frequency fT ∗ − 200 − MHz VCE=10V, IE= −50mA, f=100MHz
∗ Characteristics of built-in transistor

zElectrical characteristics curves

100 10m 1k
VO=0.3V VCC=5V VO=5V
5m Ta=100 C
50 500
25 C
2m
−40 C
OUTPUT CURRENT : Io (A)

Ta=100 C
INPUT VOLTAGE : VI(on) (V)

20

DC CURRENT GAIN : GI
1m 200 25 C
10 500µ −40 C
100
Ta= −40 C 200µ
5 50
25 C
100µ
100 C
2 50µ 20

1 20µ 10
10µ
500m 5
5µ
200m 2µ 2
100m 1µ 1
500µ 1m 2m 5m 10m 20m 50m100m 200m 500m 0 0.5 1.0 1.5 2.0 2.5 3.0 500µ 1m 2m 5m 10m 20m 50m100m200m 500m

OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : IO (A)
Fig.1 Input voltage vs. output current Fig.2 Output current vs. input voltage Fig.3 DC current gain
(ON characteristics) (OFF characteristics) vs. output current

1
lO/lI=20
500m
OUTPUT VOLTAGE : VO(on) (V)

200m Ta=100 C
25 C
100m −40 C
50m

20m

10m

5m

2m

1m
500 µ 1m 2m 5m 10m 20m 50m100m200m 500m

OUTPUT CURRENT : IO (A)

Fig.4 Output voltage vs. output current

Rev.B 2/2
Appendix

Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.

The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.

About Export Control Order in Japan

Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

Appendix1-Rev1.1
www.s-manuals.com