PROPOSED CONSTRUCTION OF ABLUTION BLOCK AND WATER RETICULATION SYSTEM IN KASAMA DISTRICT

Item No. Description Unit Quantity Rate Amount

ROOFING

0.5 gauge IBR steel roofing sheets fixed in accordance with

manufacturers recommendation as described
1 To sloping roof as per manufacturer's instructions m2 120 114.00 13,680.00
2 Ridge caping m 17 27.00 459.00
Carried Forward to Summary ZMW 14,139.00

ROOFING

Page 1
Item No. Description Unit Quantity Rate Amount

CARPENTRY, JOINERY AND IRONMONGERY

CARPENTRY

Sawn soft wood as described shall be pre-treated with two

coats of creosote wood preservative and have a
minimum bending stress of 8N/mm2 or South African pine
grade 8.
All truss joints to be gang nailed by an approved timber truss
fabricator
1 225mm x 25mm fascia and barge boards m 48 22.50 1,080.00
2 150mm x 50mm rafters m 168 16.50 2,772.00
3 100mm x 50mm trusses with struts and ties m 168 16.50 2,772.00
4 100mm x 25mm wall plates m 32 13.50 432.00
5 75mm x 50mm purlins m 136 12.90 1,754.40

JOINERY
Exterior quality Rosewood doors
44mm door size 925mm wide x 1960mm high solid core panel
6 single swing No 6 150.00 900.00

Interior Quality Flush doors

44mm door size 725mm wide x 1960mm high flush doors single
7 swing No 16 100.00 1,600.00

IRONMONGERY
Ironmongery to be as per Ironmongery schedule and is to be
fitted in strict accordance with the
8 3 Lever Mortise lock as union or equal No 6 75.00 450.00
9 2 Lever Mortise lock as union or equal No 16 75.00 1,200.00

Sundries
10 Rubber door stops No 22 20.00 440.00
Carried Forward to Summary ZMW 13,400.40

Page 2
Item No. Description Unit Quantity Rate Amount
PLUMBING INSTALLATIONS ( ALL PROVISIONAL)

Soil & Waste Water Drainage

Install the following sanitary installation materials complete

with unplasticised PVC (uPVC) pipes and
fittings, solvent welded and push fit systems, including cutting
and wastage, fixing and connecting in accordance
with the manufaturers instructions as Marley (SA Pty) Ltd or
equal and approved
1 110 mm diameter vent pipe fixed to wall with holder butts. m 17 28.50 484.50
2 110mm diameter plain bend. No 17 18.00 306.00
3 110mm diameter inspection tee. No 17 19.50 331.50
4 110 mm Diameter x 500mm Long Socket Pan Connector No 17 28.50 484.50
5 110mm diameter sok 'n' vent valve (to top of vent pipe) No 17 54.00 918.00

UPVC Marley plastic soil pipes and laying as described

6 40mm diameter pipe in wall m 12 10.50 126.00

Extra over pipework for:-

7 40mm diameter bend with screw down inspection eye. No 12 7.50 90.00

Sanitary Fittings and fixing as described

8 Water Closet Suite- Vaal Protea WC complete with cistern and
toilet seat cover all as per Architects specifications No 17 350.00 5,950.00

Wash Hand Basins- Wash hand basin with integrated overflow from
white vitreous china "Bantum" by VAAL or equal
and approved) Vaal Potteries vitreous china 455 x 290mm (code )
"Magnolia" range with single taphole and
pedestal complete with 2No. 13mm basin pillar tap as 'Cobra'
including matching pop waste and mounting kit,
plug, chain and stay . 32 x 32mm Bottle trap; all c.p , with 75mm
9 deep seal, inlet screwed, female,outlet male as
Cobra (code 345/40)' , two flexible connectors and a pair of 13mm
angle regulating valves.32mm Bottle trap
adaptor,Chrome plated as Cobra (code C-345/1) for40mm uPVC
10 pipe. No 12 300.00 3,600.00

TOILET ROLL HOLDERS

11 Glazed ceramic toilet roller holder (recessed type) No 17 50.00 850.00
Carried to Collection ZMW 13,140.50

PLUMBING INSTALLATION

Page 3
Item No. Description Unit Quantity Rate Amount
Cold Water Installations
Service and overflow pipework in Chlorinated Polyvinyl Chloride
Pipework including fixing and jointing as described.
12 25mm ditto m 42 10.50 441.00
13 19mm diameter pipe m 18 9.60 172.80
14 13mm diameter ditto m 42 7.50 315.00
Extra over pipework for:-
15 19mm diameter bend No 4 7.50 30.00
16 19mm x 13mm x 19mm diameter tee No 29 8.10 234.90
17 25mm x 19mm reducing bush No 1 8.40 8.40
18 19mm x 13mm reducing bush No 29 4.50 130.50

Copper Service Connectors 300 mm long, bent as required

including brass unions both ends for and joining to steel
pipe and inlet of sanitary fitting
19 13 mm diameter No 16 25.50 408.00
Valves and jointing and fixing as described
25mm High pressure screw down stop cock valve and jointing to
20 steel pipe as described No 1 No 1 55.50 55.50
21 19 mm Ditto. No 2 75.00 150.00
22 13 mm Dito No 13 45.00 585.00
Sundry Appliances
23 Liquid Soap dispenser No 4 105.00 420.00
24 Shower mixer as cobra complete No 1 585.00 585.00

Builders Work in Connection with Plumbing Installations

Include for cutting or forming holes, chases mortices etc., in
concrete, brickwork, blockwork etc., for plumbing
installations covered in this section and for making good in all
25 trades disturbed. Item 1 360.00 360.00

Water supply connection

Allow for connecting water supply from existing point, including
26 excavations, laying of pipework and backfilling as required

Testing
27 Include for testing for water tightness. Item 1 500.00 500.00
28 Include for sterilisation of the water supply installation. Item 1 255.00 255.00
Carried to Collection ZMW 4,651.10

PLUMBING INSTALLATION

Page 4
Item No. Description Unit Quantity Rate Amount

PLUMBING INSTALLATION
COLLECTION Page
No
Total Brought Forward from Page No.
3 13,140.50
4 4,651.10
Carried Forward to Summary ZMW 17,791.60

PLUMBING INSTALLATION

Page 5
Item No. Description Unit Quantity Rate Amount
FLOOR, WALL AND CEILING FINISHINGS
Floor Finishings
Installation of 600 X 600mm nonslip porcellaine Floor tiles
1 To floor m2 100 60.00 6,000.00
2 To 100 mm high skirting m 105 10.00 1,050.00

White coloured wall tiles fixed with approved adhesive and

pointing in approved grout
including all square cutting and waste
3 To walls m2 38.25 65.00 2,486.25

Carried to forward to Summary ZMW 9,536.25

FLOOR, WALL AND CEILLING FINISHINGS

Page 6
Item No. Description Unit Quantity Rate Amount
GLAZING
Glazing to steel windows with putty as described

6mm obscure sheet glass in panes not exceeding 0.5m2 to window

1 frames m2 4 180.00 720.00

Carried Forward to Summary ZMW 720.00

GLAZING

Page 7
Item No. Description Unit Quantity Rate Amount
PAINTING AND DECORATING

INTERNALLY
Under coat, three coats washable acrylic polvin paint to
Architect's approved colour as described
1 To internally plastered walls item 1 4,500.00 4,500.00
2 To reveals width not exceeding 100mm item 1 500.00 500.00

EXTERNALLY
Sealing coat, three coats washable acrylic polvin paint
Architect's approved colour as described
3 To externally plastered walls item 1 2,350.00 2,350.00
4 To reveals width not exceeding 100mm item 1 500.00 500.00

Prepare touch up Manufacturer's priming coat, and apply one

coat primer and three coats universal enamel to
Architect's approved colour on metalwork as described to
5 Pressed steel door frames not exceeding 300mm girth m 30 6.00 180.00
6 To window frames m2 15 9.00 135.00

Apply one priming coat and three coats super universal enamel
to Architect's approved colour as described
7 To door leaves m2 58 18.00 1,044.00

One wood priming coat and three coats gloss paint, to

Architects approved colour, to
8 Fascia boards. m2 45 18.00 810.00

Sealing coat, three coats clear varnish as described

9 To hardwood doors m2 15 18.00 270.00

Carried to forward to summary ZMW 10,289.00

PAINTING AND DECORATING

Page 8
Item No. Description Page Amount

1 ROOFING 1 14,139.00
2 CARPENTRY, JOINERY AND IRONMONGERY 2 13,400.40
3 PLUMBING INSTALLATIONS 5 17,791.60
4 FLOOR AND WALL FINISHINGS 6 9,536.25
5 GLAZING 7 720.00
6 PAINTING AND DECORATING 8 10,289.00
Carried to Final Summary ZMW 65,876.25

Page 9
Item Description Unit Qty Rate Amount

EXTERNAL WORKS
SOIL DRAINAGE WORKS

Pipework in trenches
Excavate in pickable material for pipe trenches not exceeding 1.5m
deep for pipes not exceeding 200mm
diameter average 600mm deep including bakfilling and wheeling,
spreading and levelling and surplus excavated
1 material on site m 18 35.00 630.00

PVC Sewer Pipes as described

Plastic pipes and fittings laid and jointed as described
2 100mm diameter pipe in trench (measured separately) m 18 28.50 513.00

Gulley Traps
Allow for building gulley traps in accordance with drawings,
3 including all earthworks, concrete and block work No 2 195.00 390.00

The following in 8 No manholes as described

Allow for building manholes in accordance with drawings, including
4 all earthworks, concrete and block work no. 8 100.00 800.00

The following in 1 No Septic Tank as described

Allow for building Septic Tank in accordance with drawings,
including all earthworks, concrete, reinforcement steel, block work
5 and pipe connections item 1 13,500.00 13,500.00

THE FOLLOWING 1 No. SOAKWAY as described

Allow for building Soakaway in accordance with drawings, including
all earthworks, concrete, reinforcement steel, block work and pipe
6 connections item 1 8,500.00 8,500.00
Carried Forward Collection 24,333.00

SOIL DRAINAGE

STORMWATER DRAINAGE (PROVISIONAL).

7 Allow for construction of 600mm wide concrete Apron m 50 110.00 5,500.00

8 Allow for construction of concrete spoon drain m 70 130.00 9,100.00

Carried Forward to Summary ZMW 14,600.00

SURFACE WATER DRAINAGE

SECTION SUMMARY - EXTERNAL WORKS

1 SOIL DRAINAGE 10 24,333.00

2 SURFACE WATER DRAINAGE 10 14,600.00

Carried to Final Summary ZMW 38,933.00

EXTERNAL WORKS

Page 10
 MAIN SUMMARY

A ABLUTION BLOCK BUILDING 65,876.25

B EXTERNAL WORKS 38,933.00

C TOTAL LABOUR COST 104,809.25

D Add VAT @4% 4,192.37

E TOTAL COST OF REFURBISHMENT WORKS ZMW 109,001.62

Page 11