TM

OPTICAL FIBER CABLE BLOWING MACHINE

Over 2,00,000 Kms
of OFC Installed
with Stanlay Cable
Field Proven Used Internationally Blowing Machines

Duct Rodder Range ISO 9001 Manufacturing Facility

We also manufacture duct rodders for short distance cable pulls & FTTH

www.stanlay.in
TM

ST/CBM/15
Regd. Office: Fast & Economical Method for Installation of Optical Fiber Cables
Asian Contec Ltd.
Asian Centre, B-28, Okhla Industrial Area, Phase-1, New Delhi -110020, India.
Contact Nos. : Tel : +91-11-41860000 (100 Lines),
Direct Sales Helpline : +91-11-41406926,  Asia’s Largest Selling OFC Cable Blowing
Fax : +91-11-41860066
Web : www.stanlay.in www.stanlay.com email: [email protected] Machine
Works : Asian Contec Ltd. 44A Export Promotion Industrial Park-1, Jharmajari, Baddi, Himachal Pradesh, India
Regional Offices : • Ahmedabad • Chennai • Kolkatta  Based on Honda GX300 or GX270 Engine
 Easy to Set Up & Use
 Pushing Speed: Upto 90m/min (300ft/min)
 Hydraulic Push Drive System

No 1 Manufacturer of Cable Installa on Devices in Asia

Quality In Construction. Delivered.
 TM TM

CABLE BLOWING MACHINE DESCRIPTION HYDRAULIC POWER PACK

The Cable blowing machine comprising of an Air box, Cable pusher and Hydraulic pressure read out dial (mounted On Power Pack).
Hydraulic Power Pack has been designed to provide an effective and safe method of • Air pressure read out dial (Mounted on Pusher Unit).
fiber optic cable installation. The system installs fiber optic cables of 10 – 22 mm • Air pressure control / Shut off lever (Mounted on Pusher Unit).
overall diameter at up to 90m/min into pre-installed, pre-lubricated HDPE / plastic • Hydraulic on/off control lever (One each on Pusher unit & Power Pack).
telecom ducts, employing the viscous drag compressed air principle. The compressed air • Adjustable speed control for drive belts (Through speed control valve
mounted on pusher unit & pressure releif valve mounted on
is fed into the duct via a venturi principle, and the hydraulically powered cable feed
power pack).
system controls the fiber optic cable.

CABLE PUSHER UNIT

FEATURES Honda Engine

5-7 HP gasoline engine.
Control Valves

AIRBOX :
• Manufactured from aluminium.
• Can be used for a range of cable dia from 10 – 22 mm
by means of interchangeable collets with double split Suitable for
cable sealing arrangements. 1 pair of collets included
with machine, other sizes available as optional Cable Dia TECHNICAL SPECIFICATION
extra's.
• Duct sealing at mouth of box
• Duct gripping facility with non duct crush and
10m-22mm TECHNICAL SPECIFICATION :
distortion design. Pushing Force: 0 – 100 kg
Air Box Pushing Speed: 0 – 90 m/min
CABLE FEEDER: Cable Size : 10 – 22 mm OD
 Hydraulically powered. Duct Size : 20 – 50 mm O.D PLB
 Unit lifts and splits to allow insertion of Hydraulic Drive System : 100 Bar (Max)
cable between drive belts.
 Drive belts are polyurethane and Operating Pressure :
moulded to unit ensuring long life Engine Type Honda : GX300 & Gx270 (Optional) 5 - 7 HP Gasoline Engine
between replacements. Hydraulic Oil Capacity : (To be filled by user at site) 35 Lit
 Belt tension can be set by means of
adjustable chain drive tensioners fitted to Pneumatic System :
back of unit. Air Hose Bore (min): 25mm (1”) or more: Not Supplied with Machine
Cable Feeder Operating Pressure: 12 Bar

• Manuactured from aluminium. Minimum Flow Acceptable For Ducts with an Inner Diameter of :
• Available in cable size options of :
8-12mm±0.5mm
Honda Engine, 0 up to 25mm : 4m³/min 150 CFM
26 up to 30mm : 5m³/min 185 CFM
12-16mm±0.5mm
16-20mm±0.5mm
German Valves, Motors 31 up to 35mm : 7m³/min 250 CFM
20-24mm±0.5mm
& Pressure Relief Valves 36 up to 40mm : 10m³/min 375 CFM
41 up to 44mm : 12m³/min 450 CFM
Cable Feeder