Bar Joist Attachment

Features
• Can be installed on bar joists or I-beams
• Thumb spring retainer allows for ease of positioning
• Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
• No assembly required
• No loose parts
• Meets NFPA®-13 requirements for seismic sway bracing

Specifications
Material: Steel

Flange Thickness
Part Number A B C
FT
Finish: Electro-galvanized
CSBBARJEG 6.4 – 12.7 mm 50.8 mm 76.2 mm 63.5 mm
Finish: Hot-dip galvanized
CSBBARJHD 6.4 – 12.7 mm 50.8 mm 76.2 mm 63.5 mm

UL Loads
Brace Direction to Structure Service Pipe Size Rating
Parallel 25 - 250 mm 13340 N
Perpendicular 25 - 300 mm 16630 N

FM Loads
Horizontal Capacity per Intallation Angle from Vertical
Brace Direction Service Pipe Size
30° - 44° 45° - 59° 60° - 74° 75° - 90°
Parallel N/A 6270 N 9385 N 11300 N 12590 N
Perpendicular N/A 7740 N 7605 N 9165 N 10230 N

www.erico.com 1
 Adjustable I-Beam Attachment

Features
• No loose parts
• No assembly required
• Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
• Meets NFPA®-13 requirements for seismic sway bracing

Specifications
Material: Steel
Finish: Electro-galvanized

Flange Thickness Height Length Width

Part Number A
FT H L W
CSBIB075085EG 6.4 – 19.1 mm 100 – 216 mm 63.5 mm 304.8 mm 69.9 mm
CSBIB075145EG 6.4 – 19.1 mm 216 – 368 mm 63.5 mm 431.8 mm 69.9 mm
CSBIB125180EG 19.1 – 31.8 mm 100 – 457 mm 88.9 mm 546.1 mm 79.4 mm

UL Loads
Brace Direction to Structure Service Pipe Size Rating
Parallel 25 - 300 mm 13340 N
Perpendicular 25 - 300 mm 16630 N

www.erico.com 2
 FM Loads
Horizontal Capacity per Installation Angle from Vertical
Brace Direction Service Pipe Size
30° - 44° 45° - 59° 60° - 74° 75° - 90°
Parallel N/A 7,205 N 7,605 N 4,495 N 4,940 N
Perpendicular N/A 7,205 N 10,230 N 12,545 N 13,965 N

www.erico.com 3
 Multi Attachment

Features
• Disperses load over two anchors
• Minimizes the number of installed braces needed for concrete and wood structures
• Ideal for deck installations
• Use for both lateral and longitudinal sway brace applications
• Meets NFPA®-13 requirements for seismic sway bracing

Specifications
Material: Steel
Finish: Electro-galvanized

Hole Size 1 Hole Size 2

Part Number A B C D UL Listed Load
HS1 HS2
CSBMA050050EG 14 mm 14 mm 304.8 mm 63.5 mm 63.5 mm 228.6 mm 16,636 N
CSBMA050075EG 20 mm 14 mm 304.8 mm 63.5 mm 63.5 mm 228.6 mm 16,636 N

Mount to structure using holes indicated in HS1.

www.erico.com 4
 Universal Structural Attachment

Features
• Universal design allows one product to attach directly to concrete, wood, bar joist or I-beam adapters
• Snap-off bolt head helps enable easy installation and inspection of seismic sway braces
• Use for both lateral and longitudinal sway brace applications
• Works with 1" through 2" brace pipes and 1/4" angle iron braces to reduce inventory
• Center bolt does not require tightening
• Meets NFPA®-13 requirements for seismic sway bracing

Specifications
Material: Steel
Finish: Electro-galvanized

Hole Size
Part Number A B C
HS
CSBUNIV050EG 14 mm 133.4 mm 101.6 mm 41.4 mm
CSBUNIV075EG 21 mm 133.4 mm 101.6 mm 41.4 mm

UL® Loads
Brace Type Service Pipe Size Rating
Pipe 25 mm - 300 mm 16,630 N
6mm Thick Angle 25 mm - 200 mm 8,960 N

FM® Loads
Horizontal Capacity per Installation Angle from Vertical
Brace Type Service Pipe Size
30° - 44° 45° - 59° 60° - 74° 75° - 90°
Pipe N/A 7,205 N 10,230 N 12,545 N 13,965 N

www.erico.com 5
cULus is a registered certification mark of UL LLC. FM is a registered certification mark of FM Approvals LLC, LTD. NFPA is a registered trademark of National Fire Protection Association, Inc. UL is
a registered certification mark of UL LLC.

WARNING
ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO
customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction, property
damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages,
defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within
6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and
procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be
responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or
defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER’S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR
ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed
the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS
OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.

Copyright © 2012 ERICO International Corporation. All rights reserved.

CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

www.erico.com 6