Scribd
Upload
85 views

CT System Introduction

Cr

Uploaded by

7d8d47btqw
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
85 views

CT System Introduction

Cr

Uploaded by

7d8d47btqw
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 32

CT (Computed Tomography) System

Introduction

MinFound Marketing Team


CT (Computed Tomography)
CT Images generation

Ｘ-ray tube

Detector

The detector and X-ray tube are in a relatively static state, rotate the entire gantry to collect the X-ray data
passed through the patient's body, Different body tissues have different linear attenuation coefficients (μ
values), so that the X-ray data passed through the patient’s body can be used to calculated and
reconstructed for the final images.
CT Image generation

The X-ray projection data obtained by the detector is sent to the console
through the Slip Ring, the crude data will be reconstructed in the console,
and the final images will displayed.
CT Image generation

1. Digital radiography 2. Computed Tomography


CT System Main Component
ＣT Main Components
MinFound
Integrated Casting Gantry

Others Brand: welding gantry


MinFound
Magnetic direct drive gantry
(256/512 slices CT)
1. Gantry rotation speed
2. Scan speed
Gantry Slip Ring

 Function of Slip Ring


1. Signal transfer
2. Power supply

 Typical transfer speed


1.25 Gbps to 5 Gbps

 Data transfer Type

1. Optical data ring


2. RF data ring
MinFound CT Detector System

16 rows equally cut,  Image quality


16×1.25mm=20mm  Dose control
Model: ScintCare Blue 755  Tube consumption
 Scan speed
24 rows unequally cut,  Clinical applications
16×0.6mm+8×1.2mm=19.2mm
Model: ScintCare CT 16, ScintCare CT 16E

64 rows equally cut


64×0.625mm=40mm
Model: ScintCare CT 128
A solid scintillator layer that converts the x-
rays into visible light photons. The
photodiode then converts the photon input
into an electrical signal.

Properties:
•High detection efficiency
•High geometrical efficiency
•Small physical size of detector elements

Important properties for detectors


•High detection efficiency for x-rays in CT
energy range
•High dynamic range
•Narrow gaps between active elements (good
geometrical efficiency)
•Fast response
•Low cost
•Small physical size
X-ray Tube
X-ray Tube
X-ray Tube

Tube Heat Capacity: 3.5MHU, 5MHU, 7 MHU, 8 MHU


High Voltage Generator
High Voltage Generator
High Voltage Generator

HV Generator Rate should be matched with Tube Heat Capacity


The x-ray beam intensity through a filter

1. Removes low energy (soft) x-rays that do not contribute to image formation but do increase patient dose.
2. Image reconstruction is based upon the assumption of a single energy, monochromatic beam.
Clinical Scan Types

Axial Scan

Tomography

Helical Scan

CT Scan

Radiography Scout View Scan


Scanning Mode
1. Scout View Scan
Scanning Mode

2．Axial scan 3．Helical scan


(Step and shoot)
Console Applications

Axial Image MPR

MIP MnIP 3D Imaging


Vessel Analysis*
Lung Imaging Solution*

Lung Nodule Trachea (Airway) 3D


Cerebral Imaging*

Cerebral Hemorrhage Quantification Stroke aera Labeling and Measurement


Virtual Endoscopy*

Airway VE Vessel VE Colon VE


Orthopedics Imaging*
Dental Analysis*
CT Clinical Applications
A CT system

X-ray
Image dose
quality

You might also like