DETAILED CUM ABSTRACT ESTIMATE

Name of Work: "Improvements to the (R&B) Sub Division, Nellore by procuring certain testing
equipment."

Measurements Content Rate per

S.No ITEM OF DESCRIPTION Nos
L B D s each item
1 2 3 4 5 6 7 8
1 Electronic Weighing Balance 10kg capacity Least Count :
5gms .This must be of Table Top type Electronic Weighing
Balance with Battery Back Up Facility Capacity 10kg, Least Count
5gmswith calibration certificate .The Succesful Tenderer must 1)
Demonstrate the Equipment 2) Conduct a Minimum of 2 Tests
along with Samples 3) Impart Training on the Maintenance Aspects
of the Equipmentas per the instructions of the Engineer in Charge.

1 19500
No No.
2 Digital Thermoeter contact type with probe temp upto 800
degc.These Thermometer must have a metallic probe as well as a
Digital Display of the Temperature.The Succesful Tenderer must
1)Demonstrate the Equipment 2) Conduct a Minimum of 2 Tests
along with Samples 3) Impart Training on the Maintenance Aspects
of the Equipmentas per the instructions of the Engineer in Charge.

1 9000
No No.
3 Towards cost and Supply of Digital Compression Testing Machine
of, 2000kN Capacity along flexural testing frame having load
guages calibrated against Certifed proving rings Consistng of
Loading and Pumping Unit ,the loading unit should have suitable
size spacers to fecilitate testing of various size specimens and
Pumping Unit should have two speed design with micro switches to
swich off the motor when the load approches the maximum
capacity of the guage and relays to be provided to check the motor
does not start on its own and every detail shall conform to IS
14858 (2000)including loading ,conveyance and unloading at site
and fixing in position duly demonstrating the functioning of
Machinery to the concerned engineers and as directed by
departmental Engineers, replacing the defective parts and
maintaining machinery in good condition up to 1 year including all
taxes like GST ,VAT etc complete as per standard specification
conforming to IS 14858.

1 584425
No No.
4 Centrifugal type bitumen extractor (Electrically operated )
1 52500
No No.
5 Rapid moisture meter Speedy Moisture Meter: Range : 0 -
25%Gauge Division : 0.5%
1 9750
No No.
6 (Silver Schmidt Digital Rebound Hammer Type N, Proceq, Switzerland
make) Complies to Standards: ASTM C 805, EN 12504-2 Features and
Technical Specifications: • The Schmidt Digital Rebound Hammer for
non-destructive measurement of the concrete/mortar compressive
strength characteristics. • Schmidt Rebound Hammer is used for non-
destructive investigation of Concrete properties such as Strength. •
Hammer is used for hitting the concrete at a defined energy to give the
rebound value. • Rebound Values to be independent of any Angular
correction. • Intuitive USer Interface with Tilt sensor • Rechargeable
Battery via USB • Direct conversion to compressive strength based on
validated curves, regional curves or user defined curves • Memory for
Storage of data, Windows based Software • Compresñve strength values
are directly displayed. • Vteasuring range: 10 - 100 N/mm2 (1'450 to
14'500 psi) • Impact energy: - 2.207 Nm • Graphic Alphanumeric Display
with 17 x 71 pixels resolution Automatic conversion to the required
measurement unit (MPa, N/min2, kg/cm2, psi), Weight: less than
600gms

1 260000
No No.
7 PROFOSCOPE+ Proceq Make, Switzerland For Rebar Location,
Mid-Point between Rebars, Determination of Cover, Estimation
Bar Diameter.
1 285000
No No.
8 Laboratory Electronic oven with digital indicator cum controller
with safety alami nge 50 to 250 with ir circulating fan , S S inside
sizc 450x450x450mm Double lled inside chamber of Anodized
Aluminium/stainless steel. Outer chamber of ld stee duly powder
coated. Digitally controlled from 50° C to 250‘ C 1° C. aded
heating elements are placed in the ribs at the bottom and sides.
Complete th L Shape thermometer, two indicators, Thermostate &
on/off switch. To
erate on 220/230 volts. With air circulation Fan. A.C. supply. Sizes:
450 x 450 x 0 (18"xl8"x18") Cap: 95 Lit.

1 34800
No No.
9 kinematic Viscometer Bath Model No. Zl 40! 7 (HSN Code L
9024) With 20 Ltr Silicon Oil and NABL Calibration Certificate
Standards Specification: This Bath Is Designed and Developed
Under the Strict Supervision of our Experienced Professionals In
Accordance With The International Quality Standards. Our
Offered Bath Is Thoroughly Checked on Various Parameters To
Ensure Zero-Defect. This Bath Is Widely Used In National
Laboratories And Pharmaceutical Industries. Features: Intelligent
Signal Sampling for Accurate Data Measuring And Parameter
Reading Accurate Viscometer for Improving Experimental
Efficiency High Precision Digital Display Ideal For Controlling
The Temperature Accuracy Durable Glass Bath For Optimum Heat
Preservation Desktop Based All-In-One Design for Easy
Operations And Portability Electric Stirrer for Ensuring Uniform
Temperature Of Bath Easy Cleaning and Drying Of Viscometer
Tubes Other Information: 1 fre Accompanying Absolute Kinematic
Viscosity Bath Ate Utilized
To Measure Supreme Thickness Of Consistency Reviewed
Clearing Bitumen

1 122500
No No.
10 Marshall Stability Test Apparatus Model No. Zi 4022 (HSN Code:
9024) With NABL Calibration Certificate Standards: ASTM: D
1559 T- 62. Bs 598-107 Specification: Marshall Stability Test
Apparatus Is Used By Road Constructors, Contractors, Engineers,
Testing Laboratories And Other Industries To Test The Stability Of
Bituminous Samples. Marshall Stability Test Apparatus Consists
Of: Robust Construction 50kn Capacity Rate Of Travel
50.8mm/Min Safety Cut-Off Switch It Consists Of Body Housing,
A Geared Screw Jack And Motor Drive Mechanism ZI 4022-A :
Marshall Load Frame 1 No. ZI 4022-B : Breaking Head Stability
Mould, With A Dial Gauge ( Having 25mm Travel And 0.0 lmm
Least Count), For Flow Measurement 1 No. ZI 4022-C :
Compaction Mould, Steel Cylindrical 3 Nos. ZI 4022-D : Base
Plate ?-Nos. ZI 4022-E : Extension Collar 3 Nos. ZI 4022-F :
Compaction Pedestal, Manual Operation, Comprising A Steel Plate
Capped On A Wooden Post. A Mould Clamp 1s Fitted To The Top
Of The Plate. 1 No. ZI 4022-G : Compaction Hammer, Satisfies Bs
598. The Hammer Has A 10-12 Lti Sliding Weight With A free Fall
Of 457 Mm 2 Nos. ZI 4022-H : Load Transfer Bar 1 No. ZI 4022-
1 : Paper Discs, Non Absorbent, 15 Cm Diameter Pack
Of 100 No. l Pkt.Suitable For Operation On 230 V, 50hz, Single
Phase, A.C. SupDly.

1 111800
No No.
11 Towards cost and Supply of Vanier callipers (digital) 0 to 200 mm
make INSIZE

1 14845
No No.
Total
12 ADD NAC @ 0. 10%

13 GST 18% extra for above items

14 Unforeseen and Rounding OFF Total

Deputy Executive Engineer(R&B) Executive Engineer(R&B)

QC Sub Division Nellore Q.C Division Kadapa
AILED CUM ABSTRACT ESTIMATE

e (R&B) Sub Division, Nellore by procuring certain testing

Amount

19500

9000

584425

52500

9750
260000

285000

34800
122500

111800
 14845

1484620
1485
1486105
267499
38794
1792397

Executive Engineer(R&B)