HEGLER

SIROWELL SIROWELL
IV/1

Subsoil drainage system for infrastructure projects –

inspection chambers and drainage pipes to DIN 4262-1

SIROWELL: Application:

Subsoil drainage system consisting  Use in infrastructure

of chambers and drainage pipes. projects
Tunnel-shaped flat invert corrugated
PVC-U pipes to DIN 4262-1 C1.  Drainage of sports fields

Locally perforated pipes: DN 100 to DN 200  Drainage of buildings and

Multi-purpose pipes: DN 250 structures
SIROWELL - the subsoil drainage pipe for
________________________________________________________________________________________________

SIROWELL
subsoil drainage pipe

 Made from PVC-U, tunnel-

shaped
 Corrugated pipe with smooth
invert, lightweight, robust and
flexible
 Convex invert, thus tight
connection even under load
 Special HEGLER slotting
technique: great number of
short, clean-edged slots
 Wide range of accessories

SIROWELL The box-shaped bottom is ex- Unique slotting technique

PVC-U subsoil drainage pipes tremely beneficial in terms of
hydraulics: Even if the pipe is The water inlets are a character-
SIROWELL subsoil drainage pipes only partially filled, water can flow istic feature of all types of
are made from PVC-U, a long- off well so that deposits are HEGLER subsoil drainage pipes.
established raw material that has avoided. Compared to other pipes,
proved its versatility for decades. HEGLER drainage pipes stand
The high modulus of elasticity of The invert of the tunnel-shaped out for to the great number of
PVC-U is rendering the pipes a HEGLER corrugated pipe is of short, clean-edged water inlets.
reliable mechanical strength and slightly convex shape. This They are located in the corrugation
load-bearing capacity. PVC-U is prevents the pipe bottom from valleys to keep the resistance to
resistant to chemicals and bio- bulging in the coupling under water inflow as low as possible,
chemical effects so that SIRO- load, thus ensuring reliable pipe which contributes to the water
WELL can withstand all natural joints. absorption capacity and stability of
substances occurring in the soil. the pipe. There is no widening
SIROWELL's wall thickness is of slots even under varying loads.
Tunnel-shaped corrugated pipe adapted to the static require- The water inlet area exceeds
with smooth invert ments varying over the cross- 50 cm²/m.
section of the pipe. So the
SIROWELL is a tunnel-shaped "edges" at the bottom that are
corrugated pipe with smooth box- subject to higher static loads
shaped bottom. The application- have a thicker wall to ensure a
specific profile of the pipe arch uniform deformation behavior all
renders adequate stability with low around the pipe circumference.
material consumption. The corrugation renders SIRO-
WELL pipes very flexible. They
can be laid in bends and are able
to follow soil movements.
 standard applications
_____________________________________
_

Coupling Integral coupling Bend 45°

Branch 90 Reducer Outlet Inspection chamber SIRO-inspect S 300/S 400

Accessories Inspection and flushing Quality control

chambers SIRO-inspect
SIROWELL pipes are connected S 300/S 400 The constant quality of
in a push-fit way by separate SIROWELL subsoil drains is
sleeves (100 and 160 mm pipes) HEGLER offers special inspection guaranteed by internal quality
or inline formed couplings (200 and flushing chambers of nominal control.
and 250 mm pipes). Narrow sizes DN 300 and DN 400 to cover
manufacturing tolerances in the SIROWELL size range from Coming up to DIN 4262-1
shape and dimensions of the DN 100 through DN 250. By Type C1, SIROWELL subsoil
couplings result in sand-tight modern inspection systems, these drains are meeting the require-
joints with no need for a seal. chambers, which are 300 mm or ments of contracting authorities.
400 mm in inside diameter, can be Tenders can be invited in
Thanks to the extensive range of serviced and flushed in an optimal accordance with the Standard
accessories, SIROWELL pipes and cost-effective way. Service Catalogue for Road and
are most versatile in use. They Bridge Construction, Section
are just as well suited for The full-length even-level flow 110.
systems consisting of laterals channel and easy handling on
and mains as usual in sports installation and operation allow the Corresponding texts as GAEB
fields drainage as they are for system to be competently used in file can be taken from the down-
subsoil drains and foundation traffic route construction. load area at www.hegler.de.
drainage of buildings.
For adapting the chamber depths
to the gradients, chamber raising
pieces are available that can be cut
to height on the construction site.
Chamber covers of cast iron are
offered in classes A, B and D.
  Technical data
Nominal size DN 100 160 200 250
Measures A mm 110 160 215 260
B mm 99.5 146 191.5 237.5
C mm 64 93 123 153
Important Discharge area cm²/m 88 194 340 524
Water inlet area cm²/m ≥ 50
 SIROWELL pipes should be stored
on the original stillages with care Slot width to DIN 4262-1 (1.2 ± 0.4 mm)
being taken that an even support is Standard length (20 °C)
used. effective length m 6.00 6.00 6.00 6.00
length incl. socket m 6.07 6.10 6.20 6.20
 PVC is deteriorated by intensive
Socket length mm 135 180 410 430
and permanent UV radiation.
Therefore, SIROWELL pipes Socket outside diameter mm 116 166 225 280
should not be stored in the open Minimum bending radius m 5.25 10.25 14.25 15.75
air for more than 6 months.
Standard perforation LP MP
 The pipes should not be tipped or
dumped during transportation. Packing data
When lifting pipes or pipe bundles,
care should be taken that they are Nominal size DN 100 160 200 250
supported either in the middle or
Stillage contents lengths 140 65 35 18
on both ends.
m 840 390 210 108
 In order to ensure long-term Stillage length m 6.10 6.15 6.25 6.25
operation of the drainage system, dimensions width m 1.24 1.18 1.20 1.10
pipes should be embedded in filter height m 1.43 1.49 1.40 1.27
material composed in accordance
with the Terzaghi filter regulations. Each pipe length is supplied with a separate or inline formed coupling.
For embedding, DIN EN 1610
should be observed. System accessories

 Filter material, gravel and broken Nominal size DN 100 160 200 250
stones must not be dumped Coupling ○ ○ ○ ○
directly onto the pipes from great
heights.
Adaptor spigot solid wall pipe* ○ ○ ○ -
Adaptor socket solid wall pipe* ○ ○ ○ ○
 Compacting equipment should not Reducer ○----------------------○
be applied directly on top of the ○--------○ ○--------○ ○-------○
pipes. In the vicinity of pipes, light
compacting equipment should be Branch 90° ○ ○ ○ ○
used. Bend 45° ○ ○ ○ ○
Bend 90° ○ ○ ○ ○
 Pipes may be cleaned by high-
pressure flushing devices at a Outlet ○ ○ ○ ○
maximum flushing pressure of End cap ○ ○ ○ ○
80 bar.
Adaptor concrete manholes ○ ○ ○ ○
*
 Low temperatures (T < 5 °C) do Sewer pipe to DIN EN 1401
impair the impact resistance of
The information given in this brochure is the most up-to-date available and is intended to
PVC pipes. So transportation and provide information on our products and their possible applications. It is not a guarantee of
installation should be carried out certain features, nor of their suitability for certain specific applications. Our guarantee applies
with the necessary care at such to a perfect quality according to our specifications within the scope of our General Terms and
temperatures. Conditions. The schematic drawings (pipe/accessories) are indicative only. They are not
binding as to product geometry. The current edition supersedes any former versions. Subject
to change.