ROBOLT 05 8 - 210 S - C

1/2
126 2000 - 08 - 23
DOC 010

Overall Length
TU - C 25 10000
TU - C 26 10200
TU - C 27 10400
TU - C 28 10600
TU - C 210 10800

920

2100
1550
1980

320

2750 2550
3200 6250

3020

1550

2980
5750 1750
3100
37°
Fully mechanized high productivity rock bolter,
automotive hydrostatic transmission four wheel drive jumbo,
for installation of bolts from 5 to 10 ft in drift heights up to 6.6 m.

Rock drill Hydraulic control system

Model ............................................................Hydrastar 200 B Type............................................................ THC 500 B
Standard female shank........................................ R 25 - R 32 Control Functions
Weight..........................................................................115 kg Power control ................................... adjustable full power
Impact frequency ..................................................... 40-65 Hz
adjustable collaring power
Percussion pressure ........................................... 140-200 bar
Impact power ............................................................ 6-10 kW Rotation control.........................adjustable rotation speed
reversible rotation
Wrench Flushing control...........................................water flushing
Model ..............................................................RHR 50 Series
Weight............................................................................40 kg
Oil pressure ............................................................... 210 bar
Maxi. torque ............................................................. 32 mdaN Power Pack
Electrical motor.......................................45 kW (60 hp)
Bolting Head Hydraulic pump types
Model ........................................................................... TU - C
Percussion, bolting head & boom................variable
Bolt length.................................................................5 to 10 ft
displacement, axial piston
Drill steel ........................................................... H 22 till H 28
Bolt magazine .......... Capacity....................10, 12 or 15 bolts Rotation ............................................................ gear
(depending on bolt used)
Boom Tramming possibilities
Model ...........................................................................B 26 B
Type.........................................................................Universal Tramming speed..................1 st gear .......................... 5 km/h
Weight (with hoses) ...................................................1330 kg 2 nd gear ....................... 12 km/h
Feed roll-over.................................................................. 360° Maximum operating grade ......................................up to 35%
Boom extension .......................................................1200 mm Weight, approximate................................................ 13000 kg

SANDVIK TAMROCK SECOMA reserves the right to change this specification without further notice. aprod0800
ROBOLT 05 - 126 5050
Spec. no: 8 - 210 S - C
ROOF BOLTING HEIGHT
4200
2000 - 08 - 23 Turret Type A B C Roof
2/2 (Optimum-B-)
TU - C 25 2950 5050 5900

TU - C 26 3250 5200 6050 1550

C TU - C 27 3550 5350 6200

TU - C 28 3850 5550 6400

B
TU - C 210 4600 5900 6650 Side Walls
A = Minimum operating height
B = Optimum roof bolting area
A 3050 C = Maximum height reached
4600 4940
5200 up
to
70 3750
50

1200
Carrier ............................................................. CB 05 Rock Drill Lubrication
Service capacities Compressor............................................. CT 10, screw
Fuel tank.............................................................80 litre Volume / Pressure........................... 1.0 m³ /min - 7 bar
Hydraulic tank...........................................145 + 50 litre Motor ....................................Electric - 10 hp ( 7.5 kW )
Engine Water Flushing
Diesel ...................................4-cyl. Deutz BF4L 1011 F Water booster pump.....................W.B.P. 2, centrifugal
Max. rating at 2300 rpm .......................74 hp ( 55 kW ) Volume/Pressure................................ 4000 l/h - 15 bar
Cooling system........................................Air/Oil-cooled Motor ......................................Electric - 5.5 hp ( 4 kW )
Exhaust system ......................................... ECS purifier
Electrical system
Transfer case
Type ..................................................................... Gear High/Low voltage............................. Separate cabinets
Voltage .................. Standard .....................380 - 660 V
Automotive Hydrostatic Transmission Alternative ............................ 1000 V
One pump.................................. Variable displacement Frequency ..................................................50 or 60 Hz
Axial piston,0-71 cm3/rev
Cable Reel
One motor ............. Variable displacement, axial piston
Capacity ............................. 80 m of cable 32 mm O.D.
Axles
Lighting
Front & Rear......................... Ford D45 HD, heavy duty
Working light....Two 24 Vx 150 W halogen, W.L. 2.150
with differential and planetary reduction
Tramming light.................. Four 24 V x 70 W, T.L. 4.70
Oscillation (the 2 front lights are also used as working lights)
Rear........................................................................ ± 6°
Wheels Alternatives
Tyres ............................................................12.00 x 20
Steering .......................................2 hydraulic cylinders - R - injection system (Resin cartridges).
Steering control ...................... Frame steering, Orbitrol - CC - injection system (Cement Cartridges).
Articulation angle..........37° either side from center line - S - installation system (Split Set) with HH 200 impactor.
- SW - installation system (Swellex) with water pressure
Service Brake....................... Hydrostatic transmission
intensifier.
Actuation ............................................................. Pedal
Parking and Emergency Brakes Optional equipment
Type ......................................... Hydraulic oil immersed
multiple disc brakes on both axles ANSUL Fire Suppression System LTA 101-30, 6 nozzles.
Actuation ......................................... Emergency button Ground fault detector (not applicable to 1000 V).
Spring applied, hydraulically released Additional service brake on axles.
Electric cable.
Stabilizers Fume diluter.
Front ...................................... 2 outriggers S.F.S.O. 35 Electric filling pump for hydraulic oil.
Rear..........................................2 hydraulic jacks S.J. 3 Automatic greasing system (Lincoln) for boom and carrier.
Oil Cooler Central greasing system.
Type ..................... OW 30, water-actuated counterflow Water hose reel.
Cooling capacity ................................................. 30 kW Spare wheel.
Screen handler.
Protective Telescopic Canopy .......................T.C. 05
High pressure water cleaning pump.
Lowering capability.......................................... 920 mm
SANDVIK TAMROCK SECOMA reserves the right to change this specification without further notice. SANDVIK TAMROCK SECOMA S.A., B.P. 46 - 69881 Meyzieu Cedex, France
Tel. int. + 33 4 72 45 22 00, Telex 300526 F
Telefax int. + 33 4 7831 7980