DISOMAT® Tersus - Unit Load Handling Scale

Unit Load Handling Scale (Example: Roller Train Scale)

Simple printout Function variant for

Input contact 1
platform, roller train and
Acquire tare

Material to
Input contact 2 special platform scales
Clear tare
be weighed Palett Input contact 3
Set scale to zero Weighing sequence control via
Input contact 4
Acknowledge event
keyboard, input contacts or
Input contact 5
EDP interface or fieldbus
Print intermediate total
Input contact 7
Print total / clear balance
Input contact 8
Variable print pattern formatting
using 3 existing print patterns
EDP

Weighing com-
E = 5 kg
Scale 4
Min 100 kg Max 11 t
plete 10 fixed tare memories
Tara = 10000 kg
19.05.1999 00:13:44 Ready to ope-
rate
MIN
Printer Output 3

MAX
® Output 4
DISOMAT Tersus

Application Construction Function

®
The Unit Load Handling Scale function Permanently stored in DISOMAT When unit loads are weighed, hopper
variant provides all functions required Tersus, the linkage can be loaded by or pallet weights as tare can be de-
for DISOMAT® Tersus to control a the user and changed to suit his spe- ducted from Gross weight.
platform, roller train or special platform cific requirements. The weighing result can be printed on
scale. Individual functions, operating instruc- a weigh slip or output as list report.
tions, function block plan and parame- Balancing takes place automatically
ter table are detailed in the Operating after each printout. It can also be reg-
Manual. istered in the optional legal for trade
If required, setting can be made by memory.
Schenck Process with known scale Depending on Tare status, Gross or
and calibration parameters as well as Net weights are balanced, with bal-
requisite function block parameters, ance comprising the cumulative totals
such as MIN/MAX thresholds, being weight and the number of weighing
adapted accordingly. operations performed. Baance can be
The user or Schenck Process can displayed and printed.
easily change the standard variant.

BV-D2289GB
Weighing sequences Printing
Gross weighing Single printout is preset with print pat- DISOMAT® Tersus caters for a fixed
tern 1; totals printout, with print pat- set of commands that can be ad-
Gross/Net weighing with automatic
tern 3. dressed by the EDP programmer, if
taring
required.
Net weighing while keying in Assignment of print pattern to Eligible commands, messages and
manual tare function key can be changed at protocols are detailed in the Manual
Net weighing with selection of will, e.g. single printout key can "Data communication"
stored tare value also be assigned print pattern 2.
The EDP commands most frequently
The variable print pattern formatting used are listed below.
Function keys gives the user the freedom to design
Acquire tare his own weighing report. Defaults are
Typical EDP commands:
Clear tare as follows:
Key in tare Tare
Select fixed tare Print pattern 1: Clear tare

BV-D2289GB 0739 All information is given without obligation. All specifications are subject to change. © Copyright by Schenck Process GmbH, 2007
Set to zero 1 head line and 1 line for weigh Preset tare value
Enter string data. A string with product data of Set to zero
up to 30 digits can be entered for Request single weight
Print single weight
each printout. Request weight at standstill
Print intermediate total This string remains stored until
Print total / clear balance Request cyclic weight
being overwritten. After each
Repeat printing printout a form feed is effected. Request balance
Test functions Clear cumulative total
Print pattern 2: Preset string
Input contact assignment 1 line for weigh data. String can be Print patterns 1, 2, 3
1: Single printout entered and remains stored until Print with copy to EDP
2: Acquire tare being overwritten. After each
printout a line feed is effected
3: Clear tare
Fieldbuses
4: Set to zero Print pattern 3: In addition to the serial EDP interfac-
5: Acknowledge event 1 line for totals printout without ing, DISOMAT Tersus Unit Load Han-
6: n/a string. dling Scale can also be controlled
7: Print intermediate total using commercial industrial fieldbus
8: Print total / clear balance systems.
EDP communication
For details, please see System Manual
Output contact assignment For DISOMAT® Tersus, the following BV-H 2334 and Data communications
1: Weighing complete EDP transmission protocols are avail- Manual BV-H 2359.
able:
2: Ready
Schenck standard protocol
3: Min contact
(DDP 8672)
4: Max contact
Schenck poll protocol (DDP 8785)
Siemens 3964 R
Siemens 3964 R for
SIMATIC S5 / S7
Modbus

Example

Single printout (print pattern 1):

Date Timet No. Cons. (String) Weight
25.02.00 10:45:00 123 1234567890 <123,5kg>B <24,0kg>T <99,5kg>Net

Single printout list (print pattern 2):

25.02.00 10:45:00 123 1234567890 <99,5kg>Net
25.02.00 10:47:00 124 1234567890 <100,0kg>Net
Schenck Process GmbH
Pallaswiesenstr. 100
25.02.00 11:55:00 150 1234567890 <99,5kg>B
64293 Darmstadt, Germany 25.02.00 12:10:00 151 1234567890 <99,0kg>B
Phone: +49 6151 1531-1216
25.02.00 12:25:00 152 1234567890 <100,5kg>Net
Fax: +49 6151 1531-1172
[email protected]
totals printout (print patternt 3):
www.schenckprocess.com
25.02.00 12:30:00 30 3001,5kg SU