J110K

Engine ref. 4045HF120

Alternator ref. KH00911T
Performance class G3

GENERAL CHARACTERISTICS
Frequency (Hz) 50 Hz
Voltage (V) 400/230
Standard Control Panel APM303
Optional control panel APM403
Optional Control Panel M80
Optional control panel TELYS

POWER
ESP PRP
Voltage Standby Amps
kWe kVA kWe kVA

415/240 88 110 80 100 153

400/230 88 110 80 100 159
380/220 88 110 80 100 167
DESCRIPTIVE
200/115 88 110 80 100 318
Mechanic governor
Mechanically welded chassis with antivibration
240 TRI 88 110 80 100 265
suspension 230 TRI 88 110 80 100 276
Main line circuit breaker 220 TRI 88 110 80 100 289
Radiator for core temperature of 48/50°C max with
mechanical fan
Protective grille for fan and rotating parts (CE option) DIMENSIONS COMPACT VERSION
9 dB(A) silencer supplied separately Length (mm) 1950
Charger DC starting battery with electrolyte Width (mm) 1084
12 V charge alternator and starter Height (mm) 1330
Delivered with oil and coolant -30°C
Dry weight (kg) 1097
Manual for use and installation
Tank capacity (L) 190

DIMENSIONS SOUNDPROOFED VERSION

Type soundproofing M129
Length (mm) 2554
POWER DEFINITION Width (mm) 1150
PRP : Prime Power is available for an unlimited number of annual Height (mm) 1680
operating hours in variable load applications, in accordance with ISO
8528-1. ESP : The standby power rating is applicable for supplying Dry weight (kg) 1597
emergency power in variable load applications in accordance with ISO
8528-1. Overload is not allowed. Tank capacity (L) 190
TERMS OF USE Acoustic pressure level @1m in dB(A) 78
According to the standard, the nominal power assigned by the genset is Sound power level guaranteed (Lwa) 95
given for 25°C Air Intlet Temperature, of a barometric pressure of 100
kPA (100 m A.S.L), and 30 % relative humidity. For particular conditions Acoustic pressure level @7m in dB(A) 66
in your installation, refer to the derating table.
ASSOCIATED UNCERTAINTY
For the generating sets used indoor, where the acoustic pressure levels
depends on the installation conditions, it is not possible to specify the
ambient noise level in the exploitation and maintenance instructions .
You will also find in our exploitation and maintenance instructions a
warning concerning the air noise dangers and the need to implement
appropriated preventive measures.

17/02/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 J110K
ENGINE CHARACTERISTICS

GENERAL ENGINE DATA EXHAUST

Engine brand JOHN DEERE Exhaust gas temperature @ ESP 50Hz (°C) 545
Engine ref. 4045HF120 Exhaust gas flow @ ESP 50Hz (L/s) 283
Air inlet system Turbo Max. exhaust back pressure (mm H2O) 750
Cylinders configuration L
Number of cylinders 4 FUEL
Displacement (L) 4,48 Consumption @ 100% load ESP (L/h) 30
Charge Air coolant Air/Air DC Consumption @ 100% PRP load (L/h) 27,60
Bore (mm) x Stroke (mm) 106 x 127 Consumption @ 75% PRP load (L/h) 19,80
Compression ratio 17 : 1 Consumption @ 50% PRP load (L/h) 13,50
Speed (RPM) 1500 Maximum fuel pump flow (L/h) 108
Pistons speed (m/s) 6,35
Maximum stand-by power at rated
102
RPM (kW) OIL
Frequency regulation, steady state (%) +/- 2.5% Oil system capacity including filters (L) 13,50
BMEP @ PRP 50 Hz (bar) 16,50 Min. oil pressure (bar) 1
Governor type Mechanical Max. oil pressure (bar) 5
Oil consumption 100% ESP 50Hz (L/h) 0,02
COOLING SYSTEM Oil sump capacity (L) 12,50
Radiator & Engine capacity (L) 20,20
HEAT BALANCE
Heat rejection to exhaust (kW) 64
Fan power (kW) 2,50 Radiated heat to ambiant (kW) 11
Fan air flow w/o restriction (m3/s) 3,70 Heat rejection to coolant HT (kW) 36
Available restriction on air flow (mm
20
H2O)
Type of coolant Glycol-Ethylene AIR INTAKE
Max. intake restriction (mm H2O) 625
Intake air flow (L/s) 106

EMISSIONS
Emission PM (mg/Nm3) 5% O2 100
Emission CO (mg/Nm3) 5% O2 310
Emission HC+NOx (g/kWh) 0
Emission HC (g/kW.h)

17/02/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 J110K
ALTERNATOR CHARACTERISTICS

GENERAL DATA OTHER DATA

Alternator ref. KH00911T Continuous Nominal Rating 40°C (kVA) 100
Number of Phase Three phase Standby Rating 27°C (kVA) 110
Power factor (Cos Phi) 0,80 Efficiencies 100% of load (%) 92
Altitude (m) 0 à 1000 Air flow (m3/s) 0,25
Overspeed (rpm) 2250 Short circuit ratio (Kcc) 0,55
Number of pole 4 Direct axis synchro reactance unsaturated (Xd) (%) 287
Capacity for maintaining short circuit at Quadra axis synchro reactance unsaturated (Xq) (%) 146
No
3 ln for 10 s
Open circuit time constant (T'do) (ms) 2211
Insulation class H
Direct axis transcient reactance saturated (X'd) (%) 12,90
T° class (H/125°), continuous 40°C H / 125°K
Short circuit transcient time constant (T'd) (ms) 100
T° class (H/163°C), standby 27°C H / 163°K
Direct axis subtranscient reactance saturated (X''d)
Total Harmonic Distortion in no-load 7,70
<2 (%)
DHT (%)
Subtranscient time constant (T"d) (ms) 10
AVR Regulation Yes
Quadra axis subtranscient reactance saturated (X"q)
Total Harmonic Distortion, on linear load 16,10
<5 (%)
DHT (%)
Subtranscient time constant (T"q) (ms) 10
Wave form : NEMA=TIF <50
Zero sequence reactance unsaturated (Xo) (%) 0,50
Wave form : CEI=FHT <2
Negative sequence reactance saturated (X2) (%) 11,95
Number of bearing Single Bearing
Armature time constant (Ta) (ms) 15
Coupling Direct
No load excitation current (io) (A) 0,73
Voltage regulation at established rating
0,50 Full load excitation current (ic) (A) 2,31
(+/- %)
Recovery time (Delta U = 20% 500 Full load excitation voltage (uc) (V) 28,90
transcient) (ms)
Engine start (Delta U = 20% perm. or 30% trans.)
Indication of protection IP 23 292,51
(kVA)
Technology Brushless Transcient dip (4/4 load) - PF : 0,8 AR (%) 12
No load losses (W) 2395,99
Heat rejection (W) 6932,19
Unbalanced load acceptance ratio (%) 100

DIMENSIONS
Dimensions soundproofed version Dimensions DW compact version
Type soundproofing M129 Type soundproofing
Length (mm) 2554 Length (mm) 2602
Width (mm) 1150 Width (mm) 1150
Height (mm) 1680 Height (mm) 1684
Dry weight (kg) 1597 Dry weight (kg) 1607
Tank capacity (L) 190 Tank capacity (L) 505
Acoustic pressure level @1m in dB(A) 78 Acoustic pressure level @1m in dB(A)
Sound power level guaranteed (Lwa) 95 Sound power level guaranteed (Lwa)
Acoustic pressure level @7m in dB(A) 66 Acoustic pressure level @7m in dB(A)
Dimensions DW soundproofed version Dimensions DW 48h soundproofed version
Type soundproofing M129 DW Type soundproofing M129 DW48
Length (mm) 2602 Length (mm) 2602
Width (mm) 1150 Width (mm) 1150
Height (mm) 1900 Height (mm) 1948
Dry weight (kg) 2007 %PdnetE_5% 2012
Tank capacity (L) 505 Tank capacity (L) 825
Acoustic pressure level @1m in dB(A) 77 Acoustic pressure level @1m in dB(A) 77
17/02/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 Sound power level guaranteed (Lwa) 95 Sound power level guaranteed (Lwa) 95
Acoustic pressure level @7m in dB(A) 66 Acoustic pressure level @7m in dB(A) 66

17/02/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 J110K
CONTROL PANEL

APM303, comprehensive and simple APM403, basic generating set and power plant
control

The APM403 is a versatile control unit which allows

operation in manual or automatic mode
Measurements : voltage and current
kW/kWh/kVA power meters
The APM303 is a versatile unit which can be operated in Standard specifications: Voltmeter, Frequency meter.
manual or automatic mode. It offers the following features: Optional : Battery ammeter.
Measurements: J1939 CAN ECU engine control
phase-to-neutral and phase-to-phase voltages, fuel level Alarms and faults: Oil pressure, Coolant temperature,
(In option : active power currents, effective power, power Overspeed, Start-up failure, alternator min/max, Emergency
factors, Kw/h energy meter, oil pressure and coolant stop button.
temperature levels) Engine parameters: Fuel level, hour counter, battery
Supervision: voltage.
Modbus RTU communication on RS485 Optional (standard at 24V): Oil pressure, water temperature.
Reports: Event log/ Management of the last 300 genset events.
(In option : 2 configurable reports) Mains and genset protection
Safety features: Clock management
Overspeed, oil pressure,coolant temperatures, minimum USB connections, USB Host and PC,
and maximum voltage, minimum and maximum frequency Communications : RS485 INTERFACE
(Maximum active power P<66kVA) ModBUS protocol /SNMP
Traceability: Optional : Ethernet, GPRS, remote control, 3G, 4G,
Stack of 12 stored events Websupervisor, SMS, E-mails
For further information, please refer to the data sheet for the
APM303.

17/02/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 M80, transfer of information TELYS, ergonomic and user-friendly

The M80 is a dual-function control unit. It can be used as a The highly versatile TELYS control unit is complex yet
basic terminal block for connecting a control box and as an accessible, thanks to the particular attention paid to
instrument panel with a direct read facility, with displays optimising its ergonomics and ease of use. With its large
giving a global view of your generating set's basic display screen, buttons and scroll wheel, it places the
parameters. accent on simplicity and communication.

Offers the following functions: The TELYS offers the following functions:

Engine parameters: tachometer, working hours counter, Electrical measurements: voltmeter, frequency meter,
coolant temperature indicator, oil pressure indicator, ammeter.
emergency stop button, customer connection terminal
block, CE. Engine parameters: working hours counter, oil pressure,
coolant temperature, fuel level, engine speed, battery
voltage.

Alarms and faults: oil pressure, coolant temperature, failure

to start, overspeed, alternator min./max., battery voltage
min./max., emergency stop, fuel level.

Ergonomics: wheel for navigating around the various

menus.

Communication: remote control and operation software,

USB connections, PC connection.

For more information on the product and its options, please

refer to the sales documentation.

17/02/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.