User’s Guide

For use with model: 32B2800

Need assistance?
visit our website at www.tclusa.com
or call 1-877-300-8837 (for mainland 48 States),
or 1-877-800-1269 (for AK, HI, and Puerto Rico).

Figures and illustrations in this User’s Guide are

provided for reference only and may differ from
actual product appearance. Product design and
specifications may be changed without notice.
they exit

is
 Table of Contents

Important Information..........................................................................................................................1
Important Safety Instructions..............................................................................................................2
Chapter 1: Introduction
Precautions ......................................................................................................................................... 4
Product ............................................................................................................................................. 4
Power and Plug ................................................................................................................................ 4
Power Cord and Signal Cable .......................................................................................................... 4
Use Environment .............................................................................................................................. 4
Cleaning ........................................................................................................................................... 4
Hanging the TV Set on the Wall ....................................................................................................... 4
Buttons on the TV ............................................................................................................................... 5
Sockets ................................................................................................................................................ 5
Remote Control Functions ................................................................................................................. 6

Chapter 2: General Operation

Switching on ....................................................................................................................................... 7
Switching off ....................................................................................................................................... 7
Setup Wizard ....................................................................................................................................... 8
Source Select ..................................................................................................................................... 8
Menu .................................................................................................................................................... 9
Picture ................................................................................................................................................. 9

Chapter 3: Advanced Functions

Sound .................................................................................................................................................. 9
Time ..................................................................................................................................................... 10
Setup .................................................................................................................................................... 10
Lock .................................................................................................................................................... 11
Channel ................................................................................................................................................ 13
PC ........................................................................................................................................................ 14
AV / Component / HDMI ...................................................................................................................... 14
Media .................................................................................................................................................... 14
Photo ................................................................................................................................................... 15
Music .................................................................................................................................................. 15

Chapter 4: Other Information

Troubleshooting .................................................................................................................................. 16
Base Installation ..................................................................................................................................16
Battery Caution & Disposal Information ............................................................................................17
Care and Cleaning ...............................................................................................................................17
Television Specifications ....................................................................................................................17
Limited Warranty ................................................................................................................................. 18
Legal Statement of TCL ...................................................................................................................... 20

3
Chapter 1 Introduction

Precautions
Use Environment
Read all of the instructions before operating the set.
Keep these instructions well for future use. Do not place the set on an unstable cart, stand, or table.

Product Place the set on a place that allows good ventilation.

Do not block or cover the ventilation openings on the Do not use the set near damp, and cold areas. Protect
back cover. the set from overheating.
Do not push objects of any kind into this unit through Keep the set away from direct sunlight.
the cabinet slots as they could touch the current
carrying parts or short-circuit parts, resulting in fire, Apparatus shall not be exposed to dripping or splashing
electric shock, or damage to the unit. and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Do not attempt to open the cabinet as this may cause
damage. There are no parts inside you can service by Do not use the set near dust place.
yourself. Refer all servicing to qualified personnel.

Do not touch the screen surface with fingers as this

Cleaning
may scratch or mar the TV screen. Dust the set by wiping the screen and the cabinet with
a soft, clean cloth or some special liquid cleaner.
Do not impact the TV screen with hard pressure as
this may damage the TV screen severely. Do not apply excessive force to the screen when
cleaning.
Power and Plug
Do not use water or other chemical cleaner to clean the
Unplug the set under the following conditions: screen as this may damage the surface of the TV
screen.
- If the set will not be used for a long period of time.

- If the power cord or the power outlet/plug is damaged. Hanging the TV Set on the Wall
- Follow the instructions to install and adjust the Warning: This operation requires two people.
product. Adjust those controls that are covered in this
operating instructions as improper adjustment of other To ensure a safe installation, observe the following safety
controls may result in damage. If this happens, unplug notes:
the set and refer to the service personnel.
Check that the wall can support the weight of the TV
- If the set is subject to impact or has been dropped to set and wall mount assembly.
have the cabinet damaged.
Follow the mounting instructions provided with the wall
Where the mains plug or an appliance coupler is mount.
used as disconnect device, the disconnect device
shall remain readily operable. The TV set must be installed on a vertical wall.
(* Where an all-pole mains switch is used as the
disconnect device, the switch shall remain readily Make sure to use only screws suitable for the material
operable.) of the wall.

Make sure that the TV set cables are placed so that

Power Cord and Signal Cable there is not danger of tripping over them.
Do not allow anything to rest on or roll over the power
cord and the signal cable. All other safety instructions about our TV sets are also
applicable here.
Protect the power cord and the signal cable from being
trampled.
Note：
Graphics contained within this publication are
Do not overload the power cord or the power outlet. presentation only.

Do not expose the power cord and the signal cable to Warning: the batteries shall not be exposed
moisture. excessive heat such as sunshine, fire or the like.

4
 Introduction
Buttons on the TV
Take a certain model for an example:

CH .+
1. /MENU button
Turns the TV on or standby. The TV is on,press it,brings up the main +
menu or press to return to the previous menu.Before enter menu, long press
/MENU button for 2 seconds to display Source Select. Long press it for 5
seconds to go to Standby. CH .-

2. VOL. +/- button

Increases/decreases the volume. In the menu system, they act like the right/left
direction buttons on the remote and adjust menu controls. (Note: In some menus,
VOL.+ also acts like the OK button on the remote.)
3. CH. +/- button
Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the
remote and adjust menu controls.
Note: Under USB condition, CH.+ button acts like INPUT button in remote to select different sources and CH.+/- button
can’t work act like up/down direction buttons . Press CH.- button to display or cancel the menu at bottom. /Menu button
can act like the OK button on the remote.

Sockets
Note: The location and names of the sockets on the TV may vary according to
TV model, and not all sockets available on all models.

USB
USB socket (input)
This socket can be used to connect an USB device.

HDMI1 and HDMI2 socket (input)

HDMI 1
The HDMI (High-Definition Multimedia Interface) socket can be used to connect a
or PC with a compatible video card installed, certain DVD players or a high-definition
HDMI 2 compatible digital satellite decoder. This socket provides an uncompressed digital
(MHL)
connection that carries both video and audio data by way of an integrated mini-plug
cable.
NOTE: HDMI2 support MHL.

Y/VIDEO AV(VIDEO)/YPbPr component sockets (input)

These AV(VIDEO)/Y sockets can be used to connect a device that has component
COMPONENT / AV Pb
IN
video sockets, such as a DVD player. The component sockets can recognize if the
device you're connecting to is Y Pb Pr compatible. The component sockets provide
Pr
excellent picture quality because the video is separated into three separate parts.
AV & PC & COMPONENT AUDIO IN
L
AV &PC&COMPONENT These AUDIO IN L & R sockets can be used to connect a range of equipment,
AUDIO IN
R including video recorders, camcorders, satellite receivers, DVD players, or games
consoles. AUDIO IN sockets are shared by AV,VGA and YPbPr sockets.
SPDIF SPDIF/AUDIO sockets (output)

PC socket (input)
PC IN
This socket can be used to connect a computer.

AC IN~
AC In socket (input)
This socket can be used to connect a AC supply.

5
 Introduction

Remote Control Functions

Most of your television's functions are available via the menus that appear on the
screen. The remote control supplied with your set can be used to navigate through
the menus and to configure all the general settings.

-In TV source, use these buttons to enter channel

6
 RF IN

long press /MENU button for 5 seconds

7
 General Operation
Setup Wizard

Setup Wizard TV Location

Go to next step
Retail Mode

Connect an RF cable from the Tv s input called

“RF-In”and to your TV Aerial socket.
Please select your preferred mode
Select Language Move Select MENU Clear

1. Press / button on the remote control to select

the language to be used for menus and message. Retail mode
2. Press / button on the remote control to select Press ◄/► button on the remote control to select Yes/No.
go to next step and press OK/ button to go. Note:
If you select Yes, a screen menu will proceed to select the
Setup Wizard antanna type.
Menu Language English If you select No, a screen menu will go back to the previous
Go to next step menu to select Home Mode.
Setup Wizard

Please select your preferred language Are you sure you select your retail mode

Move Select MENU Clear

Home mode defaul settings are recommended for

Time in-home use, ENERGY STAR@ qualified.retail mode is
intended for in-store display
1. Press / button on the remote control to adjust
Select MENU Return
time zone.
2. Press / button on the remote control to select 1. Press / button on the remote control to select
the time zone, daylight saving time and time format the antenna type.
you want to. 2. Press / button on the remote control to select
3. Press / button on the remote control to select go to next step and press OK/ button to start auto
scan.
go to next step and press OK/ button to go.
Setup Wizard
Setup Wizard
Air/Cable Cable
Time Zone Pacific Go to next step
Daylight Saving Time Off
Time Format 12-hour Setup Wizard
Go to next step
Analog :
Select the antenna type then auto scan
Digital :
Select the time zone & Daylight saving time RF CH : 7
Move Select MENU Return
Total Found: 0
Move Select MENU Return

MENU Clear

TV Location Source Select

1. Press ◄/► button on the remote control to select Press INPUT button to display the input source list,
Home Mode or Retail mode. Press / button to select the input source.
2. Press ▲/▼ button on the remote control to select
go to next step and press OK button to go.
Press OK button to enter the input source,
Note: Choosing “Home Mode” for the TV assigns the Press Clear button to quit.
optimal picture settings for most home environments.
Choosing “Retail mode”, which is not ENERGY STAR Source Select
compliant, sets the unit up with predefined settings TV
for retail displays. In this setting, the power AV
Component
consumption may exceed the requirements of the
HDMI1
ENERGY STAR®qualification. HDMI2
PC
Media

8
Chapter 3 Advanced Functions

Menu 【Color】
Adjust the color intensity of the picture.
Press / button to adjust.
【Tint】
Picture Sound Time Setup Lock Channel

1. Press MENU to display the main menu or return to the Adjust the hue(Red,Green) of the picture.
previous menu or close the main menu. Press / button to adjust.
2. Press / to highlight the desired menu icon. 【Sharpness】
Object edges are enhanced for picture detail.
Press / button to adjust.
Main Menu Operation 【Color Temperature】
Change the overall color cast of the picture.
Normal Produces a vivid image.
Warm Produces a red-hued image.
Picture Cool Produces a gentle blue-hued image.
1. Press MENU to enter the main menu, Press /
button to select. 【Advanced Settings】
2. Press to enter. Adjust advanced video features to fine tune the picture.
Press OK/ button to enter.

Picture Sound Time Setup Lock Channel

【Aspect Ratio】
Picture Mode User
Adjust how the picture fills the screen.
Brightness 50 Normal Automatically adjust Aspect Ratio
Contrast 50
Color 50 based on TV size and TV program.
Tint 50
Sharpness 50 Wide Use to watch wide screen(16:9)
Color Temperature
Advanced Settings
Normal content.
Move Select MENU Return
Zoom Expands image to fill screen. Top and
button maybe cut off.
Cinema Stretches image at edges but keeps a
3.Press / button to select among Picture Mode / clear image in the center.
Brightness / Contrast / Color / Tint / Sharpness /
Color Temperature / Advanced Settings. 【Noise Reduction】
5.Press / button to adjust. Set options to reduce video noise.
6.Press MENU again to exit or back to parent menu. Off Select to turn off video noise detection.
Low Detect and reduce low video noise.
【Picture Mode】 Medium Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
Adjust picture mode to change picture appearance.
【Dynamic Contrast】
Press / button to select(Standard / Vivid / Soft / User / Automatically adjust picture detail and brightness.
Power Saving). Press / button to select (Off/On).
Standard Produces a highly defined image in a
normally lit room. 【Dynamic Backlight 】
Vivid Produces a highly defined image in a
brightly lit room
Soft Produces a highly defined image in a
soft lit room.
User Select to customize picture settings.
Press / button to select (Off/Low/Hight).
Power Saving Under power saving condition, it can
meet “Energy Star” requirement. Sound
“Power Saving”
Press MENU to enter the main menu, Press / button
to select.
Press to enter.
Press MENU again to exit or back to parent menu.
【Brightness】
Adjust darkness of black sections in the picture.
Press / button to adjust. Picture Sound Time Setup Lock Channel

Sound Mode Standard

Bass 50
Treble 50
【Contrast】 Balance 0
MTS Stereo
Adjust the white level of the picture. Audio Language English
Press / button to adjust. Digital Audio Output
Surround Sound
RAW
Off
AVL Off
Move Select MENU Return

9
 Advanced Functions

1.Press to enter. 【Time Zone】

2. Press / button to select among Sound Mode Select your time zone.
/ Bass / Treble / Balance / MTS / Audio Language Press / button to select(Eastern / Central /
/ Digital Audio Output /Surround Sound / AVL Mountain / Pacific / Alaska / Hawaii / Samoa /
3.Press / button to adjust. Newfoundland / Atlantic).
4.Press MENU again to exit or back to parent menu.
【Daylight Saving Time】
【MTS】 Set the daylight saving time for your area.
Configures the multi-track sound. It is only available in ATV. Press / button to select(On / Off).
Press / button to select(Mono/Stereo/SAP).
Mono Sets the sound to mono. 【Time Format】
Stereo Sets the sound to stereo when stereo Select your time format.
is not available, the sound is Press / button to select(12-hour / 24-hour).
automatically switched to mono.
SAP Sets the sound to the second audio
program. 【Auto Clock】
Use to synchronize the display automatically.
【Audio Language】
Select the language supported by the chosen digital Press / button to select.
channel. It is available Only in DTV.
Press / button to select(English / French / Spanish). 【Clock】
Use to adjust time manually.
【Digital Audio Output】 Press / / / button to select.
Send digital audio to external audio system.
Press / button to select. Note: when Auto Clock is Off, you may adjust the
PCM Select to output audio in 2-channel clock.
stereo.
RAW Passes through RAW audio sound. Setup
1.Press MENU to enter the main menu, Press /
【Surround sound】 Button to select.
Press / button to select(On / Off).

【AVL】
Set the auto volume control. Picture Sound Time Setup Lock Channel

Press / button to select(On / Off). Menu Language English

Transparent 25%
OSD Timeout 5 Sec.
Closed Caption
Time Input Label
Other Settings
Restore Default
Press MENU to enter the main menu, Press / Setup Wizard
button to select. Select Move MENU Clear

Press to enter.
Press MENU again to exit or back to parent menu. 2.Press to enter.
3.Press / button to select among Menu Language /
Transparent / OSD Timeout / Closed Caption /
Picture Sound Time Setup Lock Channel
Input Label / Other settings / Restore Default /
Sleep Timer Off Setup Wizard.
Time Zone Pacific 4.Press / button to adjust.
Daylight Saving Time Off
Time Format 12-hour 5. Press M ENU again to exit or back to parent menu.
Auto Clock On
Clock 1980/01/06 12:00 AM

Move Select MENU Return 【Menu language】

Press / button to select your desired menu
1.Press / button to select among Sleep Timer / language(English/French/Spanish).
Time Zone / Daylight Saving Time / Time Format /
Auto Clock / Clock
【Transparent】
2.Press / button to adjust.
1.Press / button to adjust.
3.Press MENU again to exit or back to parent menu.
2. Adjust the transparency of the OSD (on screen display)
Menu.
【Sleep Timer】
Set a timer for the TV to turn off automatically.
Press / button to select(Off / 5min / 10min 【OSD TimeOut】
/ 15min / 30min / 60min / 90min / 120min / 180min 1.Press / button to select.
/240min). 2.Adjust the duration of the OSD (on screen display)
menu.

10
 Advanced Functions

【Closed Caption】
Adjust Closed Captioning settings. only available under
TV and AV source.
Press OK / button to enter.

Close Caption
【CC Mode】
Turn Closed Captioning on/off.
Press / button to select(CC Off / CC On / CC
On Mute). 【BG Opacity】
Adjust the digital Closed Captioning background
【Analog CC】 transparency.
Set Closed Captioning for standard(analog) program. Press / button to select(Default / Solid /
Press / button to select(CC1 / CC2 / CC3 / Flashing / Translucent / Transparent ).
CC4 / Text1 / Text2 / Text3 / Text4).
*Note: All the options can be adjust while the mode
【Digital CC】 is Custom.
Set Closed Captioning for digital program.
Press / button to select(Off / Service1 / Service2 / 【Input Label】
Service3 / Service4 / Service5 / Service6).
Press OK / button to enter.
Close Caption

【O ption】
Picture Sound Time Setup Lock Channel

TV Default
Adjust the digital Closed Captioning setting. AV Default
Component Default
Press OK / button to enter. HDMI1 Default
HDMI2 Default
【Mode】 PC
Media
Default
Default
Set the Mode of digital Closed Captioning. Automatic Move Next MENU Return
uses broadcaster s style.
Press / button to select(Default / Custom). 【Other Settings】
Set the parameter of audio only.
【Font Style】 Press OK / button to enter.
Select from 8 font styles.
Press / button to select(Default / Font 0 / Font 1 /
Font 2 / Font 3 / Font 4 / Font 5 / Font 6 / Font 7). 【Audio Only】
Play the audio with the picture turned off. When you
turn the Audio Only on , the panel will be dark; and
except VOL+, VOL-, POWER and MUTE buttons, press
any key to exit the Audio Only status.
Press / button to select(On / Off).

【Restore Default】
Restore the settings of user interface to the default.
Press OK / button to enter.

【Setup Wizard】
Set the first time installation.
Press OK / button to enter.
For detail please refer to page 8.

Lock
1.Press M ENU to enter the main menu, Press /
button to select.
2.Press to enter.
3.Enter your 4-digital password. Default password is
0000.
Note: If you forget the password, enter 0432 to override
any existing codes.

11
 Advanced Functions

【RRT Setting】
Picture Sound Time Setup Lock Channel
Display an advance V-Chip rating table for digital
Enter Password -----
channels.
The item is available only When current stream has
downloadable rating data.
【Reset RRT】
Reset the RRT to default.
0-9 To Enter MENU Return
The item is available only When current stream has
4.Press / button to select among Change Password / downloadable rating data.
System Lock / Input Block / US Rating / Canada Rating /
US Rating
RRT Setting / Reset RRT. For the United States, the rating setting basically
5.Press M ENU again to exit or back to parent menu. include the following options: TV, MPAA.

TV
Lock The TV rating compose of two aspects: age-based
and content-based.

Picture Sound Time Setup Lock Channel

Picture Sound Time Setup Lock Channel
Change Password
System Lock TV Rating
On
Input Block ALL FV V S L D
TV-Y
US Rating TV-Y7
Canada Rating TV-G
TV-PG
RRT Setting TV-14
Reset RRT TV-MA
: Block Press OK to Lock or Unlock
Move Select MENU Return
Move Next MENU Return

Age Define
【Change Password】 TV-Y General audience
1.Press OK/ button to enter. Parental guidance suggested
2.Enter a new 4-digital password then re-enter it to TV-Y7
confirm. TV-G Parents strongly cautioned
TV-PG Retricted
TV-14 No one 17 and under admitted
【System Lock】
TV-MA Adult audience only
Lock or unlock the buttons on the TV.
Press / button to select(Off / On). Note: The content ratings will increase depending on
the level of the age-based rating.
【Input Block】 For example, a program with a TV-PG V(violence)
Block or unblock the input sources. rating may contain moderate violence, while a TV-14 V
Press OK / button to enter. (violence) rating may contain intense violence.
Press / button to select(Unblock / Block). So locking a higher level option will automatically
cause locking the options that has more sensitive level.

Picture Sound Time Setup Lock Channel

MPAA
TV UnBlock This system defines the rating control which come from
AV UnBlock MPAA rules.
Component UnBlock
HDMI 1 UnBlock
HDMI 2 UnBlock Rating Define as
PC UnBlock
Media UnBlock
Off Close
Move Select MENU Return G General audience. All ages admitted.
PG Parental guidance suggested. Some
material may not be suitable for children.
【US Rating】 PG-13 Parents strongly cautioned. Some
Restrict movie and TV programs by US Ratings. material may be inappropriate for children
Only available when "System Lock" is "on". under 13.
Press OK / button to enter. R Restricted. Children under 17 require
accompanying parent or adult guardian.
【Canada Rating】 NC-17 No one 17 and under admitted.
Only available when "System Lock" is "on". X Adult audience only.
PressOK/ button to enter.
Restrict movie and TV programs by Canadian Ratings..
For detail please refer to page 12.

12
 Advanced Functions

Canada Rating
For Canada, the rating setting include the following options: 【Auto Scan】
Canada English, Canada French. Automatically search for channels.
Press OK / button to enter.
Canada English Analog :
These ratings are for programs which are using Picture Sound Time Setup Lock Channel
Digital : 1
English rating system. Are you sure to Auto RF CH : 4
Scan? Total Found : 1
Rating Defined as
No Yes
Off Close MENU Return

C Children Move Select MENU Return

C8+ Children 8 years and older

G General programming 【Favorite】
PG Parental guidance Add channels to create a favorite list.
14+ Viewers 14 and older Press OK / button to enter.
18+ Adult programming
【Channel List】
Canada French
The ratings are for programs which are using Press / button to adjust.
French rating system.
Rating Defined as Picture Sound Time Setup Lock Channel

Off Close Channel Channel Label

3-0
G General
8 ans+ Not recommended for children
under age 8
Prev 1/1 Next
13 ans+ Not recommended for children
MOVE Press OK change Return
under age 13 MENU

16 ans+ Not recommended for children

under age 16
18 ans+ This program is restricted to adults 【Show/Hide】
Show or hide the channels in your program list.
Press OK / button to enter.
Channel
Press M ENU to enter the main menu, Press / 【Channel Number】
button to select. Show the channel number.
Press / button to adjust.

Picture Sound Time Setup Lock Channel

【Channel Label】
Air/Cable Air Create labels for channels, up to 7 characters.
Auto Scan
Favorite
Channel List
Show/Hide
Channel Number 3-0
Channel Label

Move Select MENU Clear

1.Press to enter.
2.Press / button to select among Air/Cable、 Auto
Scan 、Favorite 、Channel List、Show/Hide、Channel
Number、 Channel Label.
3.Press / button to adjust.
4.Press M ENU again to exit or back to parent menu.

【Air/Cable】
Select signal type.
Press / button to select(Air/Cable).

13
 Advanced Functions

PC AV / COMPONENT / HDMI
Press INPUT to select PC source.
Press MENU to enter the main menu, Press / button
to select Setup menu. 1. PICTURE menu and description are the same as
Press to select PC Settings. that for TV mode.
2. TIME menu and description are the same as that for
TV mode.
Picture Sound

Menu Language
Time Setup Lock

English
Channel
3.The function of Close Caption is available only in
Transparent 25% AV/TV mode.
OSD Timeout 15 Sec.
Closed Caption 4.US Rating, Canada Rating is available only in AV
Input Label
Pc Settings /TV mode. RRT Setting and Reset RRT in LOCK
Other Settings
Restore Default menu is invalid.
Move Next MENU Return 5. AV / COMPONENT / HDMI mode has no CHANNEL
menu.
1.Press OK / to enter.
2.Press / button to select among H-Pos / V-Pos / Media
Clock / Phase / Auto .
3.Press / button to adjust. Note: Before operating Media menu,Plug in USB device,
4.Press MENU again to exit or back to parent menu. then press INPUT button to set the Input Source to Media.

Press / button to select Media in the Source menu,

Picture Sound Time Setup Lock Channel then press OK button to enter.
H-Pos 50
V-Pos 50
USB 2.0
Clock 50
Phase 25
Auto

Move Adjust MENU Return

Photo Music

【H-Pos】
Adjust the horizontal position of the picture.
Press / button to adjust.
Press / button to select the option you want to adjust
in the main Media menu, then press OK button to enter.
【V-Pos】
Adjust the vertical position of the picture. 1/1
Press / button to adjust.

【Clock】
Minimize vertical stripes in the screen image.
Press / button to adjust. Return C

【Phase】
Minimize horizontal distortion.
Press / button to adjust.

【Auto】
Adjust to the PC signal timing automatically.
Press / OK button to enter.
Notes:
1.Advanced settings in Picture menu is different,
other descriptions are the same as that for TV
mode. Select Advanced settings in Picture menu,
Aspect Ratio can select Full 100% or Point to Point.
Noise Reduction and Dynamic Contrast is invalid.
2.TIME menu and description are the same as that
for TV mode.
3.Close Caption in SETUP menu is invalid.
4.US, Canada, RRT Setting and Reset RRT in LOCK
menu is invalid.
5. PC mode has no CHANNEL menu.

14
 Advanced Functions

Photo Music
Press / button to select PHOTO in the main menu, Press / button to select MUSIC in the main menu, then
then press OK button to enter.
press OK button to enter.
Press / button to select drive disk you want to watch,
then press OK button to enter. Press / button to select drive disk you want to watch,
then press OK button to enter.
Press / button to select return option to back to the
previous menu. Press / button to select return option to back to the
previous menu.

Press / button to select the file you want to watch in Press / button to select the file you want to watch in
the file selecting menu, then press OK button to display the file selecting menu, then press OK button to play.
picture. Press OK button again to display and operate file details.
When highlighting the option you select, the file information
will appear on the right.

ON

Note: Only support JPG format

Press / button to select menu in the bottom you

want to run, then press OK button to operate.

Note: Only support MP3 format

15
Chapter 4 Other Information

Troubleshooting
Most problems you encounter with your TV can be 1. Adjust the position and orientation of the indoor/outdoor
corrected by consulting the following troubleshooting list. antenna.
2. Check the connection of antenna.
No picture, no sound 3. Fine tune the channel.
4. Try another channel. Broadcasting failure may happen.
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make Ignition
sure it is working or turned on.
3. Power plug is in a bad contact with the outlet. Black spots or horizontal streaks appear, or the picture
4. Check the signal source. flutters or drifts. This is usually caused by interference
from car ignition system, neon lamps, electric drills, or
No color other electrical appliance.

1. Change the color system. Ghost

2. Adjust the saturation.
3. Try another channel. Black-white program may be Ghosts are caused by the television signal following two
received. paths. One is the direct path, the other is reflected from
tall buildings, hills, or other objects. Changing the direction
Remote control does not work or position of the antenna may improve the reception.

1. Change the batteries. Radio frequency interference

2. Batteries are not installed correctly.
3. Main power is not connected. This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the picture.
No picture, normal sound Find out and remove the radio interference source.

1. Adjust the brightness and contrast.

2. Broadcasting failure may happen.

Normal picture, no sound

1. Press the Vol+ button to increase volume.

2. Volume is set to mute, press the mute button to restore
sound.
3. Change the sound system.
4. Broadcasting failure may happen.

Unorderly ripples on the picture

It is usually caused by local interference, such as cars,

daylight lamps and hair driers. Adjust the antenna to
minimize the interference.

Blank screen in VGA mode

Perhaps the TV can not recognize the resolution set by

the PC. Suggest to change to the best resolution or other
standard resolutions of the Windows system.

Snowy dots and interference

If the antenna is located in the fringe area of a television

signal where the signal is weak, the picture may be marred
by dots. When the signal is extremely weak, it may be
necessary to install a special antenna to improve the
reception.

16
Chapter 4 Other Information

17
18
19
20
Part No.: 72-HB2800-ENA9A