1

Great Engineering pty ltd

www.greatengineering.com

7/11 Sabre Drive, Port Melbourne

Victoria, 3207, Australia
Ph: +613 9646 8688
Fax: +613 9646 3144
Interface and Label Guide manual
Label Guide Setup

1 Hold the shaft against the 2 Push the shaft through

hole in the guide wall the other wall
and screw in place

3 Make the distance 4 Turn the nob to tighten

between the walls the screw to hold the
slightly larger than the shaft in place
width of your label

5 Place the guide in between the printer and the applicator

 Paper Feed Adjustment 0

Settings for Paper HandlingAfter Print Ink Levels

Printer Setup
Auto Cut

No Auto Cut Feed to Cut Position

BK C M Y

Refresh
Notification None

c
Pause None

Dis
p
Setu

OK Cancel Apply Help

Set up printer as per printer Open label file and set printer
1 instructions.
2 properties.
Auto cut must be turned off.
Applicator Setup

Slack

10 - 20 labels

3 Print a batch of 10-20 labels 4 Using printed labels, set up 5 Leave label slack between
to set up applicator. applicator as per their printer and applicator
instructions. Note: To set up guide, refer
to guide instructions
Interface Setup

0
7 1
6 2
5 3
4

6 Using a small screwdriver 7 Plug USB cable into 8 Plug applicator cable
turn the dial to the computer and Interface. in to applicator and
correct number for your Interface.
computer system and program.
NOTE: Dial specifications in the
table on the next page.

1 5 10

Select the print batch

9 quantity you want,
10 Click button on top of
Interface to check it
option: 1, 5 or 10. prints correctly
 Function/Operating System/Programs
Dial Settngs
Dial settings
0
7 1
6 2
5 3
4

Windows
Function: Apply and print the quantity you have set
OS: Windows
0 Programs: Adobe Acrobat Reader DC, Adobe Acrobat
Pro, Teklynx, Prisym, Microsoft Access and
Nicelabel Designer*
Function: Apply and print the quantity you have set

1 OS: Windows
Programs: Bartender, Microsoft Outlook and Adobe
Illustrator

Function: Apply and print the quantity you have set

2 OS: Windows
Programs: Adobe Reader, Microsoft Word, Microsoft
Powerpoint and Microsoft Excel

Function: Apply 1 and print the quantity you have set

OS: Windows
3 Programs: Adobe Acrobat Reader DC, Adobe Acrobat
Pro, Teklynx, Prisym, Microsoft Access and
Nicelabel*

Macintosh
Function: Apply and print the quantity you have set
OS: Macintosh
6 Programs: Preview, Adobe Illustrator, Adobe Photoshop,
Microsoft Word, Microsoft Excel and Microsoft
Powerpoint

Function: Apply and print the quantity you have set

7 OS: Macintosh
Programs: Adobe Reader, Acrobat Pro DC and
Adobe Acrobat Reader DC

* Nicelabel Designer has a different set up. Set the quantity in the print dialogue to
match the quantity chosen on the interface.

NOTE: If you change the dial number, the Interface needs to be turned on and off
by taking out and putting back in the USB device.