ORIFICE

PLATES

AITKENMFG.COM
[email protected]
O: (281) 441-5438
F: (713) 699-5186
Breaking
The mold
For over 80 years Aitken has partnered with clients to engineer AREAS OF EXPERTISE
and manufacture equipment solutions for their critical projects.
Having earned trust from some of industry’s iconic brands, Engineering Design
it is our experience, expertise and willingness to challenge Inhouse PE and application engineers
the norm that helps our clients, big and small, thrive. with direct experience with parts

Our team is crafted with people that drive innovation by Customization

thinking without limits. This allows us to be highly responsive Solution-focused designs
to evolving needs throughout a project, manage tight
fabrication schedules and maintain quality control timing
to deliver products on time. Specialty welding
450+ welding procedures
KEY PRODUCT CATEGORIES for ferrous and exotic metals
Over the years, we have become known for working alongside
our clients in helping to clearly identify the challenge so our
Material Sourcing
engineering department can design custom solutions. When
Domestic and international
a more standardized product is needed, our catalogue offers a
wide range of products that service heavy industrial industries.
Products are available in carbon steel and most alloys ranging
Fabrication
in size up to 72" and beyond.’
Advanced FEA and CFD capabilities
• Plate Products • Pressure Vessels
• Flow Products • Metering Products Field Installation
Access to 1,000+ craft labor
for larger installs

CERTIFICATIONS
 AITKEN
AITKEN MANUFACTURING
STANDARD ORIFICE INC.
PLATES
4920 AIRLINE DRIVE
D HOUSTON, TEXAS 77022 D
PH: 281-441-5438 FAX: 713-699-5186

Standard
Orifice C AITKEN STANDARD ORIFICE C

Plates PLATES

C C

CONCENTRIC BORE QUADRANT BORE

AND BEVEL
CONCENTRIC BORE AND BEVEL QUADRANT BORE
Used primarily for clean homogeneous flow of liquids, This type of orifice bore is used primarily in the
B gases, or vapors that are relatively non-viscous. The bevel measurement of high viscosity flow, such as heavy crude, B
is machined to a 45-degree angle to the desired edge syrups, and slurries. The radius on the inlet side is equal to
thickness. Accuracy range at ±.6% for beta ratio between the plate thickness. The quadrant is always recommended
0.2 to 0.75. For pipe taps, accuracy range at ±0.8% to ± where the Reynolds Number factor is less than 100,000.
1.6% for beta ratio between 0.2 to 0.5. Accuracy is ±2% for beta ratio between 0.24 to 0.6.

CONCENTRIC BORE QUADRANT BORE

AND BEVEL

B B

ECCENTRIC BORE SEGMENTAL BORE

A A

4 3 2 1

ECCENTRIC BORE SEGMENTAL BORE

A A
ECCENTRIC BORE SEGMENTAL BORE
Used primarily for measurement of entrained solids or The segmental bore is located in the same way that
slurries. The eccentric bore can also be used to measure the eccentric bore is. These bores are used primarily
vapors & gases where condensation is present. The for slurries or extremely dirty gases where the flow
eccentric bore is offset to where the bore edge is inscribed may contain impurities heavier than fluid. Accuracy is
4 in a circle that is 98% of line I.D. Accuracy range
3 between ±2% for beta ratio
2 between 0.35 to 0.75. 1
±1.5% to ±2% for beta ratio between 0.3 to 0.75.

REV: 2 | MAY 2023 AITKENMFG.COM | 3

 AITKEN MANUFACTURING INC.
4920 AIRLINE DRIVE
D HOUSTON, TEXAS 77022 D
PH: 281-441-5438 FAX: 713-699-5186

SPECIFICATIONS:

Orifice Universal orifice plates are manufactured for use with RTJ plate holders and are interchangeable with most orifice fittings.
AITKEN 500 UNIVERSAL
Each plate is carefully manufactured to meet or exceed standards set by AGA, ISA, ANSI, ASME and API recommendations.
Plates ORIFICE PLATE

Model 500
Universal T

C C

45°
FLOW A
BORE
(O.D.)

+ CUSTOM SIZES AND RATINGS AVAILABLE UPON REQUEST

B B

NOM. PIPE SIZE A L T WT* (LBS)

1'' 1.312'' 0.02'' 0.125'' 0.05

1.5'' 2'' 0.03'' 0.125'' 0.11

2'' 2.437'' 0.03'' 0.125'' 0.17

2.5'' 2.812'' 0.03'' 0.125'' 0.2

3'' 3.437'' 0.03'' 0.125'' 0.3

4'' 4.406'' 0.06'' 0.125'' 0.5

5'' 6'' 0.06'' 0.125'' 1

6'' 6.437'' 0.06'' 0.125'' 1.2

8'' 8.437'' 0.125'' 0.25'' 2

A A
10'' 10.687'' 0.125'' 0.25'' 3.2

12'' 12.593'' 0.25'' 0.25'' 8.8

14'' 14'' 0.25'' 0.25'' 10.9

16'' 16'' 0.25'' 0.375'' 14.2

4 18'' 18'' 3 0.25'' 20.375'' 18 1

20'' 20'' 0.375'' 0.375'' 33.4

24'' 24'' 0.375'' 0.375'' 48.1

Notes: Dimension “A” does not include seal ring. L = T (plate thickness) for restriction applications. *Blank weight.

REV: 2 | MAY 2023 AITKENMFG.COM | 4

 AITKEN 520 TYPE
ORIFICE PLATE

HW

Orifice SPECIFICATIONS:
520 Paddle type orifice plates are C

Plates
HL
manufactured for use with raised face
orifice flanges and holding blocks. Each
Model 520 plate is carefully manufactured to meet or
exceed standards set by AGA, ISA, ANSI,
45°
ASME and API recommendations.
B

FLOW
L
OD T
+ CUSTOM SIZES AND RATINGS AVAILABLE UPON REQUEST

125#/150# 250#/300# 400# 600# 900# 1500# 2500# ALL PRESSURE RATINGS
NOM. PIPE B
SIZE OD OD OD OD OD OD OD HL HW L T

0.5'' 1.875'' 2.125'' 2.125'' 2.125'' 2.50'' 2.50'' 2.75'' 4'' 1'' 0.015'' 0.125''

0.75'' 2.25'' 2.625'' 2.625'' 2.625'' 2.75'' 2.75'' 3.00'' 4'' 1'' 0.015'' 0.125''

1 '' 2.625'' 2.875'' 2.875'' 2.875'' 3.125'' 3.125'' 3.375'' 4'' 1'' 0.02'' 0.125''

1.25'' 3.00'' 3.25'' 3.25'' 3.25'' 3.50'' 3.50'' 4.125'' 4'' 1'' 0.025'' 0.125''

1.5'' 3.375'' 3.75'' 3.75'' 3.75'' 3.875'' 3.875'' 4.625'' 4'' 1'' 0.03'' 0.125''

2'' 4.125'' 4.375'' 4.375'' 4.375'' 5.625'' 5.625'' 5.75'' 4'' 1'' 0.0313'' 0.125''

2.5'' 4.875'' 5.125'' 5.125'' 5.125'' 6.50'' 6.50'' 6.625'' 4'' 1'' 0.0313'' 0.125''

3'' 5.375'' 5.875'' 5.875'' 5.875'' 6.625'' 6.875'' 7.75'' 4'' 1'' 0.0313'' 0.125''

4'' 6.875'' 7.125'' 7.00'' 7.625'' 8.125'' 8.25'' 9.25'' 4'' 1'' 0.0625'' 0.125''

5'' 7.75'' 8.50'' 8.375'' 9.50'' 9.75'' 10.00'' 11.00'' 4'' 1'' 0.0625'' 0.125''
A
6'' 8.75'' 9.875'' 9.75'' 10.50'' 11.375'' 11.125'' 12.500'' 6'' 1.5'' 0.0625'' 0.125''

8'' 11.00'' 12.125'' 12.00'' 12.625'' 14.125'' 13.875'' 15.25'' 6'' 1.5'' 0.125'' 0.25''

10'' 13.375'' 14.25'' 14.125'' 15.75'' 17.125'' 17.125'' 18.75'' 6'' 1.5'' 0.125'' 0.25''

12'' 16.125'' 16.625'' 16.50'' 18.00'' 19.625'' 20.50'' 21.625'' 6'' 1.5'' 0.125'' 0.25''

4 14'' 3 17.75'' 19.125'' 19.00'' 2

19.375'' 20.50'' 22.75'' - 6'' 1 1.5'' 0.125'' 0.25''

16'' 20.25'' 21.25'' 21.125'' 22.25'' 22.625'' 25.25'' - 6'' 1.5'' 0.25'' 0.375''

18'' 21.50'' 23.375'' 23.25'' 24.00'' 25.00'' 27.625'' - 6'' 1.5'' 0.25'' 0.375''

20'' 23.75'' 25.625'' 25.375'' 26.75'' 27.375'' 29.625'' - 6'' 1.5'' 0.25'' 0.375''

22'' 26.00'' 27.75'' 27.50'' 28.875'' - - - 6'' 1.5'' 0.25'' 0.375''

24'' 28.125'' 30.375'' 30.125'' 31.00'' 32.875'' 35.50'' - 6'' 1.5'' 0.25'' 0.5''

30'' 34.625'' 37.375'' 37.25'' 38.125'' - - - 6'' 1.5'' 0.5'' 0.5''

36'' 41.125'' 43.875'' 43.875'' 44.375'' - - - 6'' 1.5'' 0.5'' *0.5''

B – To be specified by customer. All dimensions are in inches. *AGA, MPMS, ISA tables do not cover this size. Suggested thickness shown.
Note: Aitken Standard orifice plates comply with AGA, API, ANSI standards, when not specified by customer.
Recommended plate thickness applies to steel plates at a maximum of 150˚F and a specified maximum allowable differential pressure.
Refer to MPMS 14.3.2, Table 2-3. L = T (plate thickness) for restriction applications.


REV: 2 | MAY 2023 AITKENMFG.COM | 5
Orifice
Plate
Weights
Model 520

+ CUSTOM SIZES AND RATINGS AVAILABLE UPON REQUEST

BLANK WEIGHT IN POUNDS

NOM. 125# 250# ISA PLATE

400# 600# 900# 1500# 2500#
PIPE SIZE 150# 300# THICKNESS

0.5'' 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.125''

0.75'' 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.125''

1 '' 0.3 0.3 0.3 0.3 0.4 0.4 0.6 0.125''

1.25'' 0.4 0.4 0.4 0.4 0.4 0.4 0.6 0.125''

1.5'' 0.4 0.5 0.5 0.5 0.5 0.5 0.7 0.125''

2'' 0.6 0.6 0.6 0.6 1 1 1 0.125''

2.5'' 0.8 0.8 0.8 0.8 1.3 1.3 1.3 0.125''

3'' 0.9 1.1 1.1 1.1 1.3 1.4 1.8 0.125''

4'' 1.4 1.5 1.5 2.6 2.7 2.9 3.5 0.125''

5'' 1.8 2.1 2.1 2.6 2.7 2.9 3.5 0.125''

6'' 2.4 3 2.9 3.4 3.9 3.7 4.4 0.125''

8'' 7.4 8.8 8.6 9.4 11.6 11 .4 13.6 0.25''

10'' 10.6 11.8 11.6 14.4 17 17 20.2 0.25''

12'' 14.8 15.7 15.4 18.3 21.7 23.7 26.3 0.25''

14'' 17.8 20.6 20.4 21.2 23.7 29.1 - 0.25''

16'' 34.5 38 37.5 41.6 43 53.5 - 0.375''

18'' 38.9 45.9 45.4 48.4 52.5 64 - 0.375''

20'' 47.4 59.1 54 60 62.8 73.5 - 0.375''

22'' 56.7 64.6 64.6 69.9 - - - 0.375''

24'' 88.4 103.1 101 .1 107.3 120.7 140.7 - 0.5''

30'' 133.7 155.7 155.7 162 - - - 0.5''

36'' 188.5 209.6 209.6 219.4 - - - *0.5''

*AGA, MPMS, ISA tables do not cover this size. Suggested thickness shown.


REV: 2 | MAY 2023 AITKENMFG.COM | 6
 D HOUSTON, TEXAS
PH: 281-441-5438 77022
FAX: 713-699-5186
PH: 281-441-5438 FAX: 713-699-5186

AITKEN INTEGRAL ORIFICE

AITKEN INTEGRAL ORIFICE
PLATES (MODEL 560 & 590)
PLATES (MODEL 560 & 590)

Integral 2"
2"
1/8"
1/8"
1/8"
1/8"
2"
2"

Orifice 1 1/4" 11
Plates C
1 1/4" 1 1/

C
Model 560 & 590 B B
B RETAINING B
SCREWS
RETAINING
SCREWS

4 3 2 C 1 C
4 3 2 C 1 C

AITKEN MANUFACTURING
AITKEN MANUFACTURING INC. INC.
4920 AIRLINE DRIVE
4920 AIRLINE DRIVE A A
HOUSTON,
B TEXAS 77022 A D A
BHOUSTON, TEXAS 77022 D
PH: 281-441-5438 FAX: 713-699-5186
PH: 281-441-5438 FAX: 713-699-5186
INTEGRAL RTJ ORIFICE INTEGRAL RTJ ORIFICE
INTEGRAL RTJ ORIFICE
PLATE (MODEL 560) INTEGRAL
PLATE RTJ ORIFICE
W/ SCREWS (MODEL 59
PLATE (MODEL 560) PLATE W/ SCREWS (MODEL 59
AITKEN INTEGRAL ORIFICE
AITKEN INTEGRAL ORIFICE
PLATES (MODEL 560 & 590)
PLATES (MODEL 560 & 590)

2" 1/8" 1/8" 2"

2" 1/8" 1/8" 2"

1 1/4" 1 1/4"
1 1/4" 1 1/4"
A C
A C
B B
B RETAINING B
RETAINING
SCREWS
SCREWS

4 3 2
4 3 2

C C
C C

A A
A A B
B
INTEGRAL RTJ ORIFICE INTEGRAL RTJ ORIFICE
INTEGRAL RTJ ORIFICE INTEGRAL RTJ ORIFICE
PLATE (MODEL 560) PLATE W/ SCREWS (MODEL 590)
PLATE (MODEL 560) PLATE W/ SCREWS (MODEL 590)

REV: 2 | MAY 2023 AITKENMFG.COM | 7

Integral
Orifice + CUSTOM SIZES AND RATINGS
AVAILABLE UPON REQUEST
Plates
API RING NUMBERS, DIMENSIONAL DATA AND WEIGHTS (US CUSTOMARY UNITS)

LINE SIZE (IN) 0.5 0.75 1 1.5 2 2.5 3 4 6 8 10 12 14 16 18 20 24

Ring-Type Joint API Ring Number R-11 R-13 R-16 R-20 R-23 R-26 R-31 R-37 R-45 R-49 R-53 R-57 R-61 R-65 R-69 R-73 R-77
Plate Holders ANSI 300 Gap1 (in) 0.625'' 0.625'' 0.625'' 0.625'' 0.655'' 0.655'' 0.655'' 0.655'' 0.655'' 0.78'' 0.78'' 0.78'' 0.78'' 0.905'' 0.905'' 0.905'' 1.03''
Model 560 & 590
ANSI 600 Gap1 (in) 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.75'' 0.75'' 0.75'' 0.75'' 0.875'' 0.875'' 0.875'' 1''
ANSI 300 TO 600

A:(in) 0.945'' 1.025'' 1.025'' 1.025'' 1.125'' 1.125'' 1.125'' 1.125'' 1.125'' 1.25'' 1.25'' 1.25'' 1.25'' 1.375'' 1.375'' 1.375'' 1.66''

B:(in) 4.25'' 4.25'' 4.25'' 4.25'' 4.25'' 5.25'' 5.25'' 5.25'' 6.25'' 6.25'' 7.25'' 7.25'' 7.25'' 7.25'' 7.25'' 7.25'' 7.25''

C: Ring OD (in) 1.593'' 2'' 2.313'' 3'' 3.688'' 4.438'' 5.313'' 6.313'' 8.75'' 11.063'' 13.188'' 15.438'' 16.938'' 18.938'' 21.438'' 23.5'' 27.875''

560 Plate Blank Weight (lb) 0.3 0.5 0.6 0.9 1.9 2.5 3.3 4.3 7.2 10.6 14.3 18.7 21.9 35.6 45.9 56.2 80.8

590 Plate Blank Weight (lb) - - - - 1.7 2.1 2.6 3.2 4.6 5.9 7.2 8.4 9.3 12.3 14 17.7 26.1

API Ring Number R-12 R-14 R-16 R-20 R-24 R-27 R-31 R-37 R-45 R-49 R-53 R-57 R-62 R-66 R-70 R-74 R-78

ANSI 900 Gap1 (in) 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.75'' 0.75'' 0.75'' 0.75'' 0.875'' 0.875'' 0.875'' 1''

A:(in) 1.025'' 1.025'' 1.025'' 1.025'' 1.025'' 1.025'' 1.195'' 1.155'' 1.155'' 1.28'' 1.28'' 1.28'' 1.47'' 1.595'' 1.685'' 1.685'' 2.09''
ANSI 900

B:(in) 4.25'' 4.25'' 4.25'' 4.25'' 5.25'' 5.25'' 5.25'' 5.25'' 6.25'' 6.25'' 7.25'' 7.25'' 7.25'' 7.25'' 7.25'' 7.25'' 9.25''

C: Ring OD (in) 1.875'' 2.063'' 2.313'' 3'' 4.188'' 4.688'' 5.313'' 6.313'' 8.75'' 11.063'' 13.188'' 15.438'' 17.125'' 19.125'' 21.75'' 23.75'' 28.25''

560 Plate Blank Weight (lb) 0.4 0.5 0.6 0.9 2 2.7 3.3 4.3 7.2 10.6 14.3 18.7 27.1 42.6 57.8 65.2 102.8

590 Plate Blank Weight (lb) - - - - 1.8 2.3 2.6 3.2 4.6 5.9 7.2 8.4 14.8 18.9 26.9 27.5 49 .7

API Ring Number R-12 R-14 R-16 R-20 R-24 R-27 R-35 R-39 R-46 R-50 R-54 R-58 R-63 R-67 R-71 R-75 R-79

ANSI 1500 Gap1 (in) 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.565'' 0.75'' 0.75'' 0.75'' 0.75'' 0.875'' 0.875'' 0.875'' 1''

A:(in) 1.025'' 1.025'' 1.025'' 1.025'' 1.195'' 1.195'' 1.195'' 1.195'' 1.195'' 1.47'' 1.47'' 1.69'' 1.84'' 2.005'' 2.005'' 2.055'' 2.31''
ANSI 1500

B:(in) 4.25'' 4.25'' 4.25'' 4.25'' 5.25'' 5.25'' 5.25'' 5.25'' 6.25'' 6.25'' 7.25'' 8.25'' 8.25'' 9.25'' 9.25'' 10.25'' 10.25''

C: Ring OD (in) 1.875'' 2.063'' 2.313'' 3'' 4.188'' 4.688'' 5.813'' 6.813'' 8.813'' 11.25'' 13.375'' 15.875'' 17.5'' 19.625'' 22.125'' 24.25'' 28.625''

560 Plate Blank Weight (lb) 0.4 0.5 0.6 0.9 2 2.7 3.8 4.9 8.2 14 18.3 30.8 40.8 64.4 77.5 93.7 132.8

590 Plate Blank Weight (lb) - - - - 1.8 2.3 2.9 3.5 5.6 9.5 11.4 21.2 29.1 42.1 47.8 57.8 81.2

API Ring Number R-13 R-16 R-18 R-23 R-26 R-28 R-32 R-38 R-47 R-51 R-55 R-60 - - - - -

ANSI 2500 Gap1 (in) 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.625'' 0.75'' 0.75'' 0.75'' - - - - -

A:(in) 1.025'' 1.025'' 1.025'' 1.195'' 1.195'' 1.255'' 1.255'' 1.345'' 1.465'' 1.69'' 1.94'' 2'' - - - - -
ANSI 2500

B:(in) 4.25'' 4.25'' 4.25'' 5.25'' 5.25'' 5.25'' 6.25'' 6.25'' 7.25'' 8.25'' 8.25'' 9.25'' - - - - -

C: Ring OD (in) 2'' 2.313'' 2.688'' 3.688'' 4.438'' 4.875'' 5.5'' 6.813'' 9.75'' 11.875'' 14.625'' 17.25'' - - - - -

560 Plate Blank Weight (lb) 0.5 0.6 0.7 1.5 2.5 3.3 4.5 6.6 13.1 20.1 37.6 49.8 - - - - -

590 Plate Blank Weight (lb) - - - - 2.1 2.9 3.7 5.5 10.2 15.5 26.6 39.3 - - - - -

STANDARD PLATE THICKNESS (US CUSTOMARY UNITS) (1) Approximate gap refers to the approximate distance between the flanges.
(2) DN50 to DN150 (2-in to 6-in) Model 560 plate holders have
PLATE SIZE (IN)2 THICKNESS (IN)
6.4 mm (0.25-in) thick plates as standard; add 3.2 mm (0.125-in) to the
0.5 to 6'' 0.125'' A dimension and approximate gap for Model 560 holders in these sizes.
(3) The oval form is standard.
8 to 14'' 0.25''

16 to 20'' 0.375'' 560 Ring Joint Orifice Plate Holders are a one-piece integral plate seal.
24'' and Larger 0.5'' 590 Ring Joint Orifice Plate Holders are provided with hold-down screws to
keep the universal plate in the holder. Universal Plates are sold separately.

REV: 2 | MAY 2023 AITKENMFG.COM | 8

reference
info
 LENGTH AREA

CONVERT FROM CONVERT TO MULTIPLY BY CONVERT FROM CONVERT TO MULTIPLY BY

Inches Feet 0.083 Sq inches Sq feet 0.007

Standard Inches Yards 0.028 Sq inches Sq yards 0.001

English Feet Inches 12 Sq feet Sq inches 144

Conversion
Feet Yards 0.333 Sq feet Sq yards 0.111

Feet Miles 0.000 Sq yards Sq inches 1,296

Tables Yards Feet 3 Sq yards Sq feet 9

Yards Miles 0.001 Sq yards Acres 0.000

Acres Sq feet 43,560

VOLUME WEIGHT

CONVERT FROM CONVERT TO MULTIPLY BY CONVERT FROM CONVERT TO MULTIPLY BY

Cu inches Cu feet 0.001 Grains Ounces 0.002

Cu inches Cu yards 0.000 Ounces Grains 437.5

Cu inches US gal 0.004 Ounces Pounds 0.063

Cu feet Cu inches 1,728 Pounds Ounces 16

Cu feet Cu yards 0.037 Pounds US tons 0.001

Cu feet US gal 7.481 Pounds Lonqtons 0.000

Cu yards Cu inches 46,656 US tons Pounds 2,000

Cu yards Cu feet 27 Long tons Pounds 2,240

SHEET INFORMATION STEEL PLATE WEIGHT

GAUGE THICKNESS (IN) WT/SQFT (LBS) THICKNESS (IN) WT/SQFT (LBS)

10 0.135 5.625 3/16 7.66

11 0.120 5 1/4 10.21

12 0.105 4.375 5/16 12.76

14 0.075 3 3/8 15.32

16 0.060 2.5 1/2 20.42

18 0.048 2 5/8 25.53

20 0.036 2 3/4 30.63

22 0.030 1 7/8 35.74

24 0.024 1 1 40.84

DRILL SIZE FOR PIPE TAPS

NOMINAL PIPE SZ (IN) TAP DRILL SZ (IN) DECIMAL EQUIVALENT NO OF THREADS PER IN THREAD ENGAGEMENT

1/8 11/32 0.344 27 1/4

1/4 7/16 0.438 18 3/8

3/8 37/64 0.578 18 3/8

1/2 23/32 0.719 14 1/2

3/4 59/64 0.922 14 9/16

1 1 5/32 1.156 11.5 11/16

1 1/4 1 1/2 1.5 11.5 11/16

1 1/2 1 47/64 1.734 11.5 11/16

REV: 2 | MAY 2023 AITKENMFG.COM | 10

 CONVERSION OF LIQUID MEASURES AND WEIGHTS

TO CONVERT IMPERIAL
US GALLON US PINT US LB *H20 US CUBIC FT US CUBIC IN LITER CUBIC METER
CONVERT FROM GALLON

U.S. gallon 1 0.833 8 8.337 0.134 231 3.785 0.004

Standard Imperial gallon 1.201 1 9.608 10 0.161 277.42 4.546 0.005

English
U.S. pint 0.125 0.104 1 1.042 0.017 28.875 0.473 0.000

U.S. pound *H20 0.120 0.1 0.960 1 0.016 27.708 0.454 0.000

Conversion U.S. cubic foot 7.481 6.229 59.844 62.365 1 1728 28.317 0.028

Tables
U.S. cubic inch 0.004 0.004 0.035 0.036 0.001 1 0.016 0.000

Liter 0.264 0.220 2.113 2.202 0.035 61.025 1 0.001

Cubic meter 264.17 219.969 2113.34 2202 35.314 61023.38 999.972 1

Water (H2O) @ 60˚F (15.6˚C) / 1 Barrel = 42 Gallons (Petroleum measure)

CONVERSIONS OF PRESSURE AND HEAD

TO CONVERT IN MM
LB/lN2 LB/FT2 KG/CM2 KG/M2 IN *H2O FT *H2O †BAR †MPA
CONVERT FROM **MERCURY **MERCURY

Lb/ln2 1 144 0.070 703.07 27.728 2.311 2.306 51 .715 0.069 0.007

Lb/Ft2 0.007 1 0.000 4.882 0.193 0.016 0.014 0.359 0.000 0.000

kg/cm2 14.223 2048.155 1 10000 394.38 32.865 28.959 735.559 0.981 0.098

kg/m2 0.001 0.205 0.000 1 0.039 0.003 0.003 0.074 0.000 0.000

In. *H2O 0.036 5.197 0.003 25.375 1 0.083 0.073 1.865 0.002 0.000

Ft. *H2O 0.433 62.321 0.030 304.275 12 1 0.881 22.381 0.030 0.003

In. **Mercury 0.491 70.726 0.035 345.316 13.619 1.135 1 25.400 0.034 0.003

Mm **Mercury 0.019 2.785 0.001 13.595 0.536 0.045 0.039 1 0.001 0.000

†Bar 14.504 2088.55 1.020 10197.2 402.156 33.513 29.53 750.062 1 0.1

†Mpa 145.038 20885.5 10.197 101972 4021 .56 335.13 295.3 7500.62 10 1

Water (H2O) @ 68˚F (20˚C) / **Mercury @ 32˚F (0˚C) / †Mpa (megapascal) = 10 Bar

CONVERSION OF FLOW RATES

TO CONVERT US MILLION CU FT /SEC CU METERS / BARRELS BARRELS

US GAL/MIN IMP GAL/MIN LITERS / SEC
CONVERT FROM GAL/DAY (SEC-FT) HOUR (42 GAL/MIN) (42 GAL/DAY)

U.S. gal/min 1 0.833 0.001 0.002 0.227 0.063 0.024 34.286

Imp gal/min 1.201 1 0.002 0.003 0.273 0.076 0.029 41 .176

US Million gal/day 694.4 578.25 1 1.547 157.7 43.8 16.53 23810

Cu ft/sec 448.83 373.7 0.646 1 101 .9 28.32 10.686 15388

Cu m/sec 15852 13200 22.83 3535 3600 1000 377.4 -

Cu m/min 264.2 220 0.380 0.589 60 16.667 6.29 9058

Cu m/hr 4.403 3.67 0.006 0.009 1 0.278 0.105 151

Liters/sec 15.85 13.2 0.023 0.035 3.6 1 0.377 543.3

Liters/min 0.264 0.22 0.000 0.001 0.06 0.017 0.006 9.058

Barrels (42 gal)/min 42 34.97 0.061 0.094 9.538 2.65 1 1440

Barrels (42 gal)/day 0.029 0.024 0.000 0.000 0.007 0.002 0.001 1

To use above conversion charts, locate the unit to be converted in the left hand column. Then follow the conversion factors across the row for
the desired conversion unit. Use this factor to multiply with your numerical value to convert. Example: Convert 5 psi to inches of water. From
the Conversion of Pressure and Head Chart, 5 (psi) x 27.7276 (Conversion factor) = 138.638 inches of water.

REV: 2 | MAY 2023 AITKENMFG.COM | 11

 LENGTH AREA

SI Units CONVERT FROM CONVERT TO SI SYMBOL MULTIPLY BY CONVERT FROM CONVERT TO SI SYMBOL MULTIPLY BY

and Feet Meter m 0.030 Sq inches Sq millimeter mm 2

645.163

Conversion Inch Millimeter mm 25.4 Sq inches Sq centimeter cm 2

6.452

Tables Microinches Micrometer μm 0.025 Sq inches Sq meter m2 0.001

Statute miles Kilometer km 1.609 Sq feet Sq meter m2 0.093

Acres Hectare ha 0.405

VOLUME MASS

CONVERT FROM CONVERT TO SI SYMBOL MULTIPLY BY CONVERT FROM CONVERT TO SI SYMBOL MULTIPLY BY

Cu inches Cu millimeter mm3 16387 Pounds Kilogram kg 0.454

Cu inches Cu centimeter cm3 16.387 Ton (short) Metric ton t 0.907

Cu inches Cu meter m 3
0.000 Ton (long) Metric ton t 1.016

Cu feet Cu meter m 3
0.028

Fluid ounce Milliliter mL 29.57

Quarts (US) Liter L 0.946 VELOCITY

Gallons (US) Liter L 3.785 CONVERT FROM CONVERT TO SI SYMBOL MULTIPLY BY

Feet/Second Meter/Second m/s 0.305

Feet/Second cm/sec cm/sec 30.48

PRESSURE Feet/Minute Meter/Second m/s 0.005

CONVERT FROM CONVERT TO SI SYMBOL MULTIPLY BY Miles/Hour Kilometer/Hour km/h 1.609

lbs/in2 Pascal Pa 6,895

lbs/in2 Kilopascal kPa 6.895

lbs/in2 Megapascal MPa 0.007

lbs/in2 Bar Bar 0.069

Bar Kilopascal kPa 100

Millibar Pascal Pa 100

REV: 2 | MAY 2023 AITKENMFG.COM | 12

 CONVERSION TEMPERATURE TABLE

°C °F °C °F °C °F °C °F °C °F

-73.3 -100 -148 -3.3 26 78.8 21.1 70 158 110 230 446 354 670 1238

-67.8 -90 -130 -2.8 27 80.6 21.7 71 159.8 115 240 464 360 680 1256

Conversion -62.2 -80 -112 -2.2 28 82.4 22.2 72 161.6 121 250 482 365 690 1274

Temperature
-59.5 -75 -103 -1.7 29 84.2 22.8 73 163.4 127 260 500 371 700 1292

-56.7 -70 -94 -1.1 30 86 23.3 74 165.2 132 270 518 376 710 1310

Tables -53.9

-51.1
-65

-60
-85

-76
-0.6

0
31

32
87.8

89.6
23.9

24.4
75

76
167

168.8
138

143
280

290
536

554
382

387
720

730
1328

1346

-48.4 -55 -67 0.6 33 91.4 25 77 170.6 149 300 572 393 740 1364

-45.6 -50 -58 1.1 34 93.2 25.6 78 172.4 154 310 590 399 750 1382

-42.8 -45 -49 1.7 35 95 26.1 79 174.2 160 320 608 404 760 1400

-40 -40 -40 2.2 36 96.8 26.7 80 176 165 330 626 410 770 1418

-37.2 -35 -31 2.8 37 98.6 27.2 81 177.8 171 340 644 415 780 1436

-34.4 -30 -22 3.3 38 100.4 27.8 82 179.6 177 350 662 421 790 1454

-31.6 -25 -13 3.9 39 102.4 28.3 83 181.4 182 360 680 426 800 1472

-28.8 -20 -4 4.4 40 104 28.9 84 183.2 188 370 698 432 810 1490

-26.1 -15 5 5 41 105.8 29.4 85 185 193 380 716 438 820 1508

-23.3 -10 14 5.6 42 107.6 30 86 186.8 199 390 734 443 830 1526

-20.6 -5 23 6.1 43 109.4 30.6 87 188.6 204 400 752 449 840 1544

-17.8 0 32 6.7 44 111.2 31.1 88 190.4 210 410 770 454 850 1562

-17.2 1 33.8 7.2 45 113 31.7 89 192.2 215 420 788 460 860 1580

-16.7 2 35.6 7.8 46 114.8 32.2 90 194 221 430 806 465 870 1598

-16.1 3 37.4 8.3 47 116.6 32.8 91 195.8 226 440 824 471 880 1616

-15.6 4 39.2 8.9 48 118.4 33.3 92 197.6 232 450 842 476 890 1634

-15 5 41 9.4 49 120.2 33.9 93 199.4 238 460 860 482 900 1652

-14.4 6 42.8 10 50 122 34.4 94 201.2 243 470 878 487 910 1670

-13.9 7 44.6 10.6 51 123.8 35 95 203 249 480 896 493 920 1688

-13.3 8 46.4 11.1 52 125.6 35.6 96 204.8 254 490 914 498 930 1706

-12.8 9 48.2 11.7 53 127.4 36.1 97 206.6 260 500 932 504 940 1724

-12.2 10 50 12.2 54 129.2 36.7 98 208.4 265 510 950 510 950 1742

-11.7 11 51.8 12.8 55 131 37.2 99 210.2 271 520 968 515 960 1760

-11.1 12 53.6 13.3 56 132.8 37.8 100 212 276 530 986 520 970 1778

-10.6 13 55.4 13.9 57 134.6 43 110 230 282 540 1004 526 980 1796

-10 14 57.2 14.4 58 136.4 49 120 248 288 550 1022 532 990 1814

-9.4 15 59 15 59 138.2 54 130 266 293 560 1040 538 1000 1832

-8.9 16 60.8 15.6 60 140 60 140 284 299 570 1058 565 1050 1922

-8.3 17 62.6 16.1 61 141.8 65 150 302 304 580 1076 593 1100 2012

-7.8 18 64.4 16.7 62 143.6 71 160 320 310 590 1094 620 1150 2102

-7.2 19 66.2 17.2 63 145.4 76 170 338 315 600 1112 648 1200 2192

-6.7 20 68 17.8 64 147.2 83 180 356 321 610 1130 675 1250 2282

-6.1 21 69.8 1,8.3 65 149 88 190 374 326 620 1148 704 1300 2372

-5.6 22 71.6 18.9 66 150.8 93 200 392 332 630 1166 734 1350 2462

-5 23 73.4 19.4 67 152.6 99 210 410 338 640 1184 760 1400 2552

-4.4 24 75.2 20 68 154.4 100 212 413 343 650 1202 787 1450 2642

-3.9 25 77 20.6 69 156.2 104 220 428 349 660 1220 815 1500 2732

Example how to use table: Convert 70 degrees Fahrenheit to centigrade. Find your value (70) in the bold letters. To the left, under the column °C, is
your conversion for centigrade. Answer: 70°F = 21.1 °C Note, for converting centigrade to Fahrenheit the same procedure would be used, except you
would go to the right hand column for degrees Fahrenheit. Therefore, 70 degrees centigrade would equal to 158 degrees Fahrenheit.

REV: 2 | MAY 2023 AITKENMFG.COM | 13

Specifications
MATERIAL SPECIFICATIONS

FORGINGS WROUGHT FITTINGS

P-NO../GROUP NO. NOMINAL STEEL (FLANGES, COUPLINGS, (ELBOWS, REDUCERS, TEES,
DESIGNATION WELDOLETS, ETC) WELD CAPS, ETC) PIPE PLATE REMARKS

SA-516-70 or SA-36 for Non-pressure

Carbon SA-105 SA-234-WPB SA-106-B SA-36 retaining parts
1/1
SA-350-LF2 SA-420-WPL6 SA-333 Gr. 6 SA-516-70 Cold Temperature Service

1Cr - 1/2Mo SA-182-F12 SA-234-WP12 SA-335-P12 SA-387-12 Alloy Steel

4/1
1 1/4Cr - 1/2Mo SA-182-F11 SA-234-WP11 SA-335-P11 SA-387-11 -

5A/1 2 1/4Cr - 1/2Mo SA-182-F22 SA-234-WP22 SA-335-P22 SA-387-22 Alloy Steel

5Cr - 1/2Mo SA-185-F5 SA-234-WP5 SA-335-P5 SA-387-5 Alloy Steel

5B/1
9Cr - 1 Mo SA-182-F9 SA-234-WP9 SA-335-P9 SA-387-9 -

18Cr - 8Ni SA-182-F304 SA-403-WP304 SA-312-TP304 SA-240-304 Stainless Steel

18Cr - 8Ni SA-182-F304H SA-403-WP304H SA-312-TP304H SA-240-304H -

16Cr - 12Ni - 2Mo SA-182-F316 SA-403-WP316 SA-312-TP316 SA-240-316 Stainless Steel

8/1
16Cr - 12Ni - 2Mo SA-182-F316H SA-403-WP316H SA-312-TP316H SA-240-316H -

18Cr - 8 Ni SA-182-F304L SA-403-WP304L SA-312-TP304L SA-240-304L Low Carbon Stainless Steel

16Cr - 12Ni - 2Mo SA-182-F316L SA-403-WP316L SA-312-TP316L SA-240-316L Low Carbon Stainless Steel

43 67Ni - 30Cu SB164 SB-165 SB-127 Money

45 35Ni-35Fe-20Cr-Cb SB-462 SB-366 SB-729 SB-463 Alloy 20

BOLTING MATERIAL SPECIFICATION

MATERIAL SPECIFICATION DESCRIPTION REMARKS

Carbon Steel SA-193-B7 Stud -

Carbon Steel SA-194-2H Nut -

Carbon Steel SA-193-B7M Stud Nace

Carbon Steel SA-194-2HM Nut Nace

Carbon Steel SA-320-L7 Stud Low Temp. Service (-150°F)

Carbon Steel SA-194-4 Nut Low Temp. Service (-150°F)

304 Stainless Steel SA-193-B8 Stud -

304 Stainless Steel SA-194-8 Nut -

316 Stainless Steel SA-193-B8M Stud -

316 Stainless Steel SA-194-8M Nut -

REV: 2 | MAY 2023 AITKENMFG.COM | 14

 EQUIVALENTS OF API GRAVITY, BAUME GRAVITY, SPECIFIC GRAVITY, AND WEIGHT DENSITY AT 60°F / 60°F
Gravity and
Density
API BAUME SPECIFIC WT DENSITY API BAUME SPECIFIC WT DENSITY
GRAVITY GRAVITY GRAVITY(G) (LB/FT3) GRAVITY GRAVITY GRAVITY(G) (LB/FT3)

6 4.099 1.029 64.18 54 53.53 0.763 47.57

8 2.049 1.014 63.26 56 55.51 0.755 47.07

10 10.00 1.000 62.37 58 57.49 0.747 46.57

12 11.98 0.986 61.50 60 59.47 0.739 46.08

14 13.96 0.973 60.65 62 61.45 0.731 45.61

16 15.94 0.959 59.83 64 63.43 0.724 45.14

18 17.92 0.947 59.03 66 65.41 0.717 44.68

20 19.89 0.934 58.25 68 67.39 0.709 44.23

22 21.87 0.922 57.87 70 69.36 0.702 43.79

24 23.85 0.910 56.75 72 71.34 0.695 43.36

26 25.83 0.898 56.03 74 73.32 0.689 42.94

28 27.81 0.887 55.32 76 75.30 0.682 42.53

30 29.79 0.876 54.64 78 77.28 0.675 42.12

32 31.77 0.865 53.97 80 79.26 0.669 41.72

34 33.75 0.855 53.32 82 81.24 0.663 41.33

36 35.72 0.845 52.69 84 83.22 0.657 40.95

38 37.70 0.835 52.06 86 85.19 0.651 40.57

40 39.68 0.825 51.46 88 87.17 0.645 40.20

42 41.66 0.816 50.86 90 89.15 0.639 39.84

44 43.64 0.806 50.28 92 91.13 0.633 39.48

46 45.62 0.797 49.72 94 93.11 0.628 39.13

48 50.60 0.788 49.16 96 95.09 0.622 38.79

50 50.58 0.780 48.62 98 97.07 0.617 38.45

52 51.55 0.771 48.09 100 99.05 0.611 38.12

The above table is based on the weight of oil @ 60˚F in air to the same weight of water @ 60˚F in air.
The relation of Degrees Baume’ or API to Specific Gravity is expressed by the following formulas:

For liquids lighter than water For liquids heavier than water:
Degrees Baume’ = 140/G - 130 Degrees Baume’ = 145 - 145/G
Degrees A.P.I. = 141.5/G - 131.5

REV: 2 | MAY 2023 AITKENMFG.COM | 15

 SHORE SHORE
BRINELL BRINELL ROCKWELL C ROCKWELL A ROCKWELL B SCIEROSCOPE BRINELL BRINELL ROCKWELL C ROCKWELL A ROCKWELL B SCIEROSCOPE

10mm Ball Brale Brale 1/4" Brale 10mm Ball Brale Brale 1/4" Brale
3000 kg Dia of 150 kg 60 kg 100 kg 3000 kg Dia of 150 kg 60 kg 100 kg
impression Load Load Load impression Load Load Load

- - 80 92 - - 3.35 331 35 68 109 46

Hardness - - 79 91 .5 - - 3.4 321 34 67.5 108 45

Conversion
- - 78 91 - - 3.45 311 33 67 108 44

- - 77 90.5 - - 3.5 302 32 66.5 107 43

- - 76 90 - - 3.55 293 31 66 106 42

- - 75 89.5 - - 3.6 285 30 65.5 105 40

- - 74 89 - - 3.65 277 29 65 104 39

- - 73 88.5 - - 3.7 269 28 64.5 104 38

- - 72 88 - - 3.75 262 27 64 103 38

- - 71 87 - - - 258 26 63.5 102 37

2.2 780 70 86.5 - 106 3.8 255 25 63 102 37

- 760 69 86 - 103 3.85 248 24 62.5 101 36

2.25 745 68 85.5 - 100 3.9 241 23 62 101 35

- 725 67 85 - 97 - 238 22 61.5 100 34

2.3 712 66 84.5 - 95 3.95 235 21 61 99 34

- 697 65 84 - 93 4 229 20 60 98 33

2.35 682 64 83.5 - 91 4.05 223 - 59.5 97 32

- 668 63 83 - 89 4.1 217 - 59 96 31

2.4 653 62 82.5 - 87 4.15 212 - 58 95 31

- 640 61 81.5 - 86 4.2 207 - 57.5 94 30

2.45 627 60 81 - 84 4.25 202 - 57 93 30

- 615 59 80.5 - 82 4.3 197 - 56.5 92 29

2.5 601 58 80 - 81 4.35 192 - 56 91 28

- 590 57 79.5 - 80 4.4 187 - 55.5 90 28

2.55 578 56 79 - 78 4.45 183 - 55 89 27

- 567 55 78.5 - 77 4.5 179 - 54 88 27

2.6 555 54 78 120 75 4.55 174 - 53.5 87 26

- 545 53 77.5 120 74 4.6 170 - 53 86 26

2.65 534 52 77 119 72 4.65 166 - 52.5 85 25

2.7 514 51 76.5 119 70 4.7 163 - 52 84 25

2.75 495 50 76 118 67 4.75 159 - Si 83 24

2.8 477 49 75.5 117 65 4.8 156 - 50.5 82 24

- 470 48 74.5 117 64 4.85 153 - 50 81 23

2.85 461 47 74 116 63 4.9 149 - 49.5 80 23

2.9 444 46 73.5 115 61 4.95 146 - 49 79 22

2.95 429 45 73 115 59 5 143 - 48.5 78 22

3 415 44 72.5 114 57 5.05 140 - 48 77 21

- 408 43 72 114 56 5.1 137 - 47 76 21

3.05 401 42 71 .5 113 55 5.15 134 - 46.5 75 21

3.1 388 41 71 112 54 5.15 134 - 46 74 21

3.15 375 40 70.5 111 52 5.2 131 - 45.5 73 20

3.2 363 39 70 111 51 5.2 131 - 45 72 20

3.25 352 38 69.5 110 49 5.25 128 - 44.5 71 20

- 346 37 69 110 48 5.3 126 - 44 70 20

3.3 341 36 68.5 109 47 - - - - - -

REV: 2 | MAY 2023 AITKENMFG.COM | 16

 NOMINAL METRIC

Pipe
OD
PIPE PIPE LEGEND 5S 5 10S 10 20 30 STD & 40S 40 60 XH & 80S 80 100 120 140 160 XXH
SIZE SIZE (IN)

Dimensions
WT - 0.035 0.049 0.049 - 0.057 0.068 0.068 - 0.095 0.095 - - - - -

1/8 6 0.41 ID - 0.335 0.307 0.307 - 0.291 0.269 0.269 - 0.215 0.215 - - - - -

& Weights LBS/FT - 0.138 0.19 0.19 - 0.24 0.24 - 0.31 0.31 - - - - -

WT - 0.049 0.065 0.065 - 0.073 0.088 0.088 - 0.119 0.119 - - - - -

1/4 8 W ID - 0.442 0.41 0.41 - 0.364 0.364 0.364 - 0.302 0.302 - - - - -

LBS/FT - 0.257 0.33 0.33 - 0.36 0.42 0.42 - 0.54 0.54 - - - - -

WT - 0.049 0.065 0.065 - 0.073 0.091 0.091 - 0.126 0.126 - - - - -

3/8 10 0.68 ID - 0.577 0.545 0.545 - 0.529 0.493 0.493 - 0.423 0.423 - - - - -

LBS/FT - 0.328 0.42 0.42 - 0.47 0.57 0.57 - 0.74 0.74 - - - - -

WT 0.065 0.065 0.083 0.083 - 0.95 0.109 0.109 - 0.147 0.147 - - - 0.188 0.294

1/2 15 0.84 ID 0.71 0.71 0.674 0.674 - 0.65 0.622 0.622 - 0.546 0.546 - - - 0.464 0.252

LBS/FT 0.54 0.54 0.67 0.67 - 0.76 0.85 0.85 - 1.09 1.09 - - - 1.31 1.71

WT 0.065 0.065 0.083 0.083 - 0.095 0.113 0.113 - 0.154 0.154 - - - 0.219 0.308

3/4 20 1.05 ID 0.92 0.92 0.884 0.884 - 0.86 0.824 0.824 - 0.742 0.742 - - - 0.612 0.434

LBS/FT 0.69 0.69 0.86 0.86 - 0.97 1.13 1.13 - 1.47 1.47 - - - 1.94 2.44

WT 0.065 0.065 0.109 0.109 - 0.114 0.133 0.133 - 0.179 0.179 - - - 0.25 0.358

1 25 1.32 ID 1.25 1.25 1.097 1.097 - 1.087 1.049 1.049 - 0.957 0.957 - - - 0.815 0.599

LBS/FT 0.87 0.87 1.4 1.4 - 1.46 1.68 1.68 - 2.17 2.17 - - - 2.84 3.66

WT 0.065 0.065 0.109 0.109 - 0.117 0.14 0.14 - 0.191 0.191 - - - 0.25 0.382

1-1/4 32 1.66 ID 1.53 1.53 1.442 1.442 - 1.426 1.38 1.38 - 1.278 1.278 - - - 1.16 0.896

LBS/FT 1.11 1.11 1.81 1.81 - 1.93 2.27 2.27 - 3 3 - - - 3.76 5.21

WT 0.065 0.065 0.109 0.109 - 0.125 0.145 0.145 - 2 2 - - - 0.281 0.4

1-1/2 40 1.90 ID 1.77 1.77 1.682 1.682 - 1.65 1.61 1.61 - 1.5 1.5 - - - 1.338 1.1

LBS/FT 1.28 1.28 2.09 2.09 - 2.37 2.72 2.72 - 3.63 3.63 - - - 4.86 6.41

WT 0.065 0.065 0.109 0.109 - 0.125 0.154 0.154 - 0.218 0.218 - - - 0.344 0.436

2 50 2.38 ID 2.245 2.245 2.157 2.157 - 2.125 2.067 2.067 - 1.939 1.939 - - - 1.687 1.503

LBS/FT 1.61 1.61 2.64 2.64 - 3 3.65 3.65 - 5.02 5.02 - - - 7.46 9.03

WT 0.083 0.083 0.12 0.12 - 0.188 0.203 0.203 - 0.276 0.276 - - - 0.375 0.552

2-1/2 65 2.88 ID 2.709 2.709 2.755 2.755 - 2.499 2.469 2.469 - 2.323 2.323 - - - 2.125 1.771

LBS/FT 2.48 2.48 3.53 3.53 - 5.4 5.79 5.79 - 7.66 7.66 - - - 10.01 13.69

WT 0.083 0.083 0.12 0.12 - 0.188 0.216 0.216 - 0.3 0.3 - - - 0.438 0.6

3 80 3.50 ID 3.334 3.334 3.26 3.26 - 3.124 3.068 3.068 - 2.9 2.9 - - - 2.624 2.3

LBS/FT 3.03 3.03 4.33 4.33 - 6.65 7.58 7.58 - 10.25 10.25 - - - 14.32 18.58

WT 0.083 0.083 0.12 0.12 - 0.188 0.226 0.226 - 0.381 0.381 - - - 0.438 0.6

3-1/2 90 4.00 ID 3.334 3.334 3.26 3.26 - 3.124 3.068 3.068 - 2.9 2.9 - - - 2.624 2.3

LBS/FT 3.03 3.03 4.33 4.33 - 6.65 7.58 7.58 - 10.25 10.25 - - - 14.32 18.58

WT 0.083 0.083 0.12 0.12 - 0.188 0.237 0.237 - 0.337 0.337 - 0.438 - 0.531 0.674

4 100 4.50 ID 4.334 4.334 4.26 4.26 - 4.124 4.026 4.026 - 3.826 3.826 - 3.624 - 3.438 3.152

LBS/FT 3.92 3.92 5.61 5.61 - 8.66 10.79 10.79 - 14.98 14.98 - 19 - 22.51 27.54

WT - - - - - - 0.247 0.247 - 0.355 0.355 - - - - 0.71

4-1/2 120 5.00 ID - - - - - - 4.506 4.506 - 4.29 4.29 - - - - 3.58

LBS/FT - - - - - - 12.53 12.53 - 17.61 17.61 - - - - 32.53

REV: 2 | MAY 2023 AITKENMFG.COM | 17

 NOMINAL METRIC

Pipe
OD
PIPE PIPE LEGEND
SIZE SIZE (IN) 5S 5 10S 10 20 30 STD & 40S 40 60 XH & 80S 80 100 120 140 160 XXH

Dimensions
WT 0.109 0.109 0.134 0.134 - - 0.258 0.258 - 0.375 0.375 - 0.5 - 0.625 0.75

5 125 5.56 ID 5.345 5.345 5.295 5.295 - - 5.047 5.047 - 4.813 4.813 - 4.563 - 4.313 4.063

& Weights LBS/FT 6.36 6.36 7.77 7.77 - - 14.62 14.62 - 20.78 20.78 - 27.04 - 32.96 38.55

WT 0.109 0.109 0.134 0.134 - - 0.28 0.28 - 0.432 0.432 - 0.562 - 0.719 0.864

6 150 6.63 ID 6.407 6.407 6.357 6.357 - - 6.065 6.065 - 5.761 5.761 - 5.501 - 5.187 4.897

LBS/FT 7.6 7.6 9.29 9.29 - - 18.97 18.97 - 28.57 28.57 - 36.39 - 45.35 53.16

WT - - - - - - 0.301 0.301 - 0.5 0.5 - - - - 0.875

7 180 7.63 ID - - - - - - 7.023 7.023 - 6.625 6.625 - - - - 5.875

LBS/FT - - - - - - 23.57 23.57 - 38.05 38.05 - - - - 63.08

WT 0.109 0.109 0.148 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875

8 200 8.63 ID 8.407 8.407 8.329 8.329 8.125 8.071 7.981 7.981 7.813 7.625 7.625 7.437 7.187 7.001 6.813 2.875

LBS/FT 9.93 9.93 13.4 13.4 22.36 24.7 28.55 28.55 35.64 43.39 43.39 50.95 60.71 67.76 74.69 72.42

WT - - - - - - 0.342 0.342 - 0.5 0.5 - - - - -

9 225 9.63 ID - - - - - - 8.941 8.941 - 8.625 8.625 - - - - -

LBS/FT - - - - - - 33.9 33.9 - 48.72 48.72 - - - - -

WT 0.134 0.134 0.165 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1

10 250 10.75 ID 10.482 10.482 10.42 10.42 10.25 10.136 10.02 10.02 9.75 9.75 9.562 9.312 9.062 8.75 8.5 8.75

LBS/FT 15.19 15.19 18.65 18.65 28.04 34.24 40.48 40.48 54.74 54.74 64.43 77.03 89.29 104.13 115.64 104.13

WT - - - - - - 0.375 0.375 - 0.5 0.5 - - - - -

11 275 11.75 ID - - - - - - 11 11 - 10.75 10.75 - - - - -

LBS/FT - - - - - - 45.55 45.55 - 60.07 60.07 - - - - -

WT 0.156 0.165 0.18 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1

12 300 12.75 ID 12.438 14.42 12.39 12.39 12.25 12.09 12 11.938 11.626 11.75 11.374 11.062 11.75 10.5 10.126 11.75

LBS/FT 20.98 22.18 24.17 24.17 33.38 43.77 49.56 53.52 73.15 65.42 88.63 107.32 125.49 139.67 160.27 125.49

WT 0.156 0.156 0.188 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 -

14 350 14.00 ID 13.688 13.688 13.624 13.5 13.376 13.25 13.25 13.124 12.812 13 12.5 12.124 11.812 11.5 11.188 -

LBS/FT 23.07 23.07 27.73 36.71 45.61 54.57 54.57 63.44 85.05 72.09 106.13 194.96 150.79 170.21 189.11 -

WT 0.165 0.165 0.188 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 -

16 400 16.00 ID 15.67 15.67 15.624 15.5 15.376 15.25 15.25 15 14.688 15 14.312 13.938 13.562 13.124 12.812 -

LBS/FT 27.9 27.9 31.75 42.05 51.27 93.27 93.27 82.77 107.5 82.77 136.61 164.82 192.43 223.64 245.25 -

WT 0.165 0.165 0.188 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 -

18 450 18.00 ID 17.67 17.67 17.624 17.5 17.376 17.124 17.25 16.876 16.5 17 16.124 15.688 15.25 14.876 14.438 -

LBS/FT 31.43 31.43 35.76 47.39 58.94 82.15 70.59 104.67 138.17 93.45 170.92 207.96 244.14 274.22 308.5 -

WT 0.188 0.188 0.218 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 -

20 500 20.00 ID 19.624 19.624 19.564 19.5 19.25 19 19.25 18.812 18.376 19 17.938 17.438 17 16.5 16.062 -

LBS/FT 39.78 39.78 46.27 52.73 78.6 104.13 78.6 123.11 166.4 104.13 208.87 256.1 296.37 341.09 379.17 -

WT 0.188 0.188 0.218 0.25 0.375 0.5 0.375 - 0.875 0.5 1.125 1.375 1.625 1.875 2.215 -

22 550 22.00 ID 21.624 21.624 21.564 21.5 21.25 21 21.25 - 20.25 21 19.75 19.25 18.75 18.25 17.75 -

LBS/FT 43.8 43.8 50.94 58.07 86.61 114.81 86.61 - 197.41 114.81 250.81 302.88 353.61 403 451.06 -

WT 0.218 0.218 0.25 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 -

24 600 24.00 ID 23.564 23.564 23.5 23.5 23.25 22.876 23.25 22.624 22.062 23 21.562 20.938 20.376 19.876 19.312 -

LBS/FT 55.37 55.37 63.41 63.41 94.62 140.68 94.62 171.29 238.35 125.49 296.58 367.39 429.39 483.12 542.13 -

REV: 2 | MAY 2023 AITKENMFG.COM | 18

 NOMINAL METRIC

Pipe
OD
PIPE PIPE LEGEND
SIZE SIZE (IN) 5S 5 10S 10 20 30 STD & 40S 40 60 XH & 80S 80 100 120 140 160 XXH

Dimensions
WT - - - 0.312 0.5 - 0.375 - - 0.5 - - - - - -

26 650 26.00 ID - - - 25.376 25 - 25.25 - - 25 - - - - - -

& Weights LBS/FT - - - 85.6 136.17 - 102.63 - - 136.17 - - - - - -

WT - - - 0.312 0.5 0.625 0.375 - - 0.5 - - - - - -

28 700 28.00 ID - - - 27.376 27 26.75 27.25 - - 27 - - - - - -

LBS/FT - - - 92.26 146.85 182.73 110.64 - - 146.85 - - - - - -

WT 0.25 0.25 0.312 0.312 0.5 0.625 0.375 - - 0.5 - - - - - -

30 750 30.00 ID 29.5 29.5 29.376 29.376 29 29.75 29.25 - - 29 - - - - - -

LBS/FT 79.43 79.43 98.93 98.93 157.53 196.08 118.62 - - 157.53 - - - - - -

WT - - - 0.312 0.5 0.625 0.375 0.688 - 0.5 - - - - - -

32 800 32.00 ID - - - 31.376 31 30.75 31.25 30.624 - 31 - - - - - -

LBS/FT - - - 105.59 168.21 209.43 126.66 230.08 - 168.21 - - - - - -

WT - - - 0.312 0.5 0.625 0.375 0.688 - 0.5 - - - - - -

34 850 34.00 ID - - - 33.376 33 32.75 33.25 32.624 - 33 - - - - - -

LBS/FT - - - 112.25 178.89 222.78 134.67 244.77 - 178.89 - - - - - -

WT - - - 0.312 0.5 0.625 0.375 0.75 - 0.5 - - - - - -

36 900 26.00 ID - - - 35.376 35 34.75 35.25 34.5 - 35 - - - - - -

LBS/FT - - - 118.92 189.57 236.13 142.68 382.35 - 189.57 - - - - - -

WT - - - - - - 0.375 - - 0.5 - - - - - -

38 950 38.00 ID - - - - - - 37.25 - - - - - - - -

LBS/FT - - - - - - 150.82 - - 200.43 - - - - - -

WT - - - - - - 0.375 - - 0.5 - - - - - -

40 1000 40.00 ID - - - - - - 39.25 - - 39 - - - - - -

LBS/FT - - - - - - 158.84 - - 211.12 - - - - - -

WT - - - - - - 0.375 - - 0.5 - - - - - -

42 1050 42.00 ID - - - - - - 41.25 - - 41 - - - - - -

LBS/FT - - - - - - 166.86 - - 221.81 - - - - - -

WT - - - - - - 0.375 - - 0.5 - - - - - -

44 1100 44.00 ID - - - - - - 43.25 - - 43 - - - - - -

LBS/FT - - - - - - 174.88 - - 232.5 - - - - - -

WT - - - - - - 0.375 - - 0.5 - - - - - -

46 1150 46.00 ID - - - - - - 45.25 - - 45 - - - - - -

LBS/FT - - - - - - 182.89 - - 243.19 - - - - - -

WT - - - - - - 0.375 - - 0.5 - - - - - -

48 1200 48.00 ID - - - - - - 47.25 - - 47 - - - - - -

LBS/FT - - - - - - 190.91 - - 253.88 - - - - - -

WT - - - - - - 0.375 - - 0.5 - - - - - -

54 1350 54.00 ID - - - - - - 53.25 - - 53 - - - - - -

LBS/FT - - - - - - 215 - - 286 - - - - - -

WT - - - - - - 0.375 - - 0.5 - - - - - -

60 1500 60.00 ID - - - - - - 59.25 - - 59 - - - - - -

LBS/FT - - - - - - 239 - - 318 - - - - - -

REV: 2 | MAY 2023 AITKENMFG.COM | 19

Add Aitken to your AML
and minimize downtime

AITKENMFG.COM
[email protected]
O: (281) 441-5438
F: (713) 699-5186

4920 Airline Drive

Houston, Texas 77022