Wall-Mounted Residential Energy Storage Cabinet Version A0
Product Specification Acknowledgment
Wall-Mounted Residential Energy
Product Name：
Storage Cabinet
Specification： 51.2V106AH
Product No.： Energia-05A
Version Design/Date Review/Date Approval/Date
V0 Yang Jianyu/2023.06.16 Hu Qingwei/2023.06.16 Hou Kai/2023.06.16
第 1 页 共 14 页
Wall-Mounted Residential Energy Storage Cabinet Version A0
Contents
Product Specification Acknowledgment .................................................................................................... 1
1. Scope of application .................................................................................................................................. 3
2. Battery pack specification .......................................................................................................................... 3
3. Inverter matching list. ................................................................................................................................4
4. Product appearance and interface definition .................................................................................................5
5. Functional description of the battery pack interface panel .............................................................................6
6. BMS technical specifications ..................................................................................................................... 7
6.1. BMS main specifications ................................................................................................................. 7
7. Description of working mode .................................................................................................................... 9
8.Functional description .............................................................................................................................. 10
9. Batterypackelectricalperformancetest............................................................................................................. 12
9.1. Standard test conditions .................................................................................................................12
9.2. Test equipment requirements ......................................................................................................... 12
9.3. Electrical performance test ........................................................................................................ 13
10. Maintenance and troubleshooting ..................................................................................................... 13
11. List of key raw materials ................................................................................................................... 14
11. Package ................................................................................................................................................ 14
第 2 页 共 14 页
Wall-Mounted Residential Energy Storage Cabinet Version A0
1. Scope of application
Th i s sp e ci f i c at i o n is ap p l i ca b l e to th e 51 . 2 V /4 8 V Wal l - Mo u n t e d
Res i d e n t i al En e r g y St o r a g e Ca b i n e t an d pr o d uc e d by Mi r a cl e New Po w e r (Wu x i )
Co. , Lt d .
2. Battery pack specification
Capacity 106Ah
Nominal Voltage 3.2 V
Cell
Dimension 52.3×147.3×117.2mm
Weight 1.92kg
Combination Method 16S1P
Nominal Capacity： 106Ah
Capacity
Minimal Capacity： (1C ) 104Ah
Nominal Voltage： 51.2V
Voltage
Cut-off Voltage： 44.8V~ 57.6V
Standard Charge：0.5C (50A)
Charge
Battery parameters Quick Charge：1C (100A)
Discharge Discharge Current：100A
Weight 50±1Kg
Dimension( L × W × H ) 540mm*495mm*173mm
Charge ： 0℃ ~50℃；
Operating Temperature
Discharge：-20℃ ~60℃；
Single over voltage/under voltage,
Protective Function charging/discharging over current, short circuit,
temperature
Cycle Life (0.2C, 25℃@80% DOD)) ＞3000 times
Degree Of Protection IP20
Communication type CAN、RS485、RS232
Parallel options
Parallel Qnt 16groups (does not support series connection)
第 3 页 共 14 页
Wall-Mounted Residential Energy Storage Cabinet Version A0
3. Inverter matching list.
No. Inverter brand Protocol name Communication type
Goodwe Communication Protocol-v
1 Goodwe CAN
1.5
2 PYLONTESH CAN-Bus-protocol-PYLON-v 1.3 CAN
Growatt protocol (RS485) RS485
Growatt
3 Growatt BMS CAN-Bus-protocol low
CAN
voltage-V1.05 -English version
Voltronic Inverter and BMS 485
4 Victron RS485
communication protocol
5 LXP Luxpowertek Battery CAN Protocol CAN
6 Sofar CAN specification rev5 CAN
Using the power protocol(Same as
7 Deye CAN
PYLONTESH)
Using the power protocol(Same as
8 Wheat field CAN
PYLONTESH)
Using the power protocol(Same as
9 Sermatec CAN
PYLONTESH)
第 4 页 共 14 页
4. Product appearance and interface definition
Product appearance and size
Project Size（mm）
Width 539.5
Length 494.6
High 173
第 5 页 共 14 页
Wall-Mounted Residential Energy Storage Cabinet Version A0
5. Functional description of the battery pack interface panel
NO. Project Function Description Remark
Power terminal, used for battery
1 Terminal Block
external output
Not in use to reduce power
2 ON/ OFF Management system switches
consumption
Emergency system reset to ensure
3 RESET
system maintainability
Address assignment for system
4 ADS
expansion application
5 DRY CONTACT Dry contact for signal output of battery status
Communication System communication interface RS
6
interface 485, CAN , RS 232
LED indication (green light) during Always on when the system
7 RUN
normal operation is running
Alarm indication, alarm indication
8 ALM
when the system is abnormal
9 CAPACITY Battery pack indicator light
10 LCD screen Di s pl a y ba t t er y st at u s so c , et c . Optional
第 6 页 共 14 页
6
Wall-Mounted Residential Energy Storage Cabinet Version A0
6. BMS technical specifications
6.1. BMS main specifications
NO. Project Threshold Precision Remark
Single over voltage ≤20mV
1 protection value 3700mV
Monomer over voltage delay
2 time 1.0S
Single over voltage ≤20mV
3 protection recovery 3380mV
Total pressure over ≤200mV
4 voltage protection value 58.4V
Overall overcharge
5 protection delay 1.0S
Overall overcharge
6 protection release 54V ≤200mV
voltage
Monomer over-
7 discharge protection 2700mV ≤20mV
voltage
Monomer over-
8 discharge protection 1.0S
delay
Single over-discharge
9 protection release 2950mV ≤20mV
voltage
Overall over-discharge
10 43.2V ≤200mV
protection voltage
Overall over-discharge
11 protection delay 1.0S
Overall over-discharge
12 protection release 47.2V ≤200mV 30S sleep mode after
voltage
limit can be set,the
Charging Current ≤2%@FS maximum turn-on
13 Limiting Current 10A
current value is 100 A
≤2%@FS≤
Charging overcurrent 10 consecutive
14 warning current 105A 2%@FS occurrences will lock
Charging over current ≤2%@FS This state is no longer
15 protection current 110A automatically released
16 Short circuit protection Have
Short circuit protection
17 released Charge or remove load
MOS Over temperature ≤2℃
18 115℃
protection temperature
Charging low
19 temperature protection -5℃
temperature
Charging high
20 temperature protection 65℃
temperature
第 7 页 共 14 页
Discharge high
21 temperature protection 70℃
temperature
Discharge low
22 temperature protection -20℃
temperature
Balanced turn-on ≤20mV
23 voltage 3500mV
Low battery warning SOC＜ 5% <5%
24 threshold
25 Cell failure protection Differential pressure＞ 1V ≤20mV
第 8 页 共 14 页
Wall-Mounted Residential Energy Storage Cabinet Version A0
7. Description of working mode
● Charging mode: When the BMS detects that the charger is connected and the
external charging voltage is 0.5 V higher than the internal battery voltage, it turns
on the charging MOSFET for charging. When the charging current reaches the
effective charging current, it enters the charging mode. In charging mode, both
charge and discharge MOSFETs are closed.
● Discharge mode: BMS enters discharge mode when it detects that the load is
connected and the discharge current reaches the effective discharge current.
● Standby mode: When the above two modes are not satisfied, enter the standby mode.
● Shutdown mode (off by default): Normal standby for 24 hours, battery triggers under
voltage protection, press button to shut down, BMS enters shutdown mode. The wake-up
conditions of the shutdown mode: 1. Charging is activated; 2. Press the button to turn on
the power.
● LED indicator instructions
LED light sequence , 1 running light, 1 warning light, 4 capacity lights
SOC Alarm Run
● Capacity indication
Status Charge Discharge
Capacity L4 L3 L2 L1 L4 L3 L2 L1
indicator
0-25% Off Off Off Flash Off Off Off Flash
25-50% Off Off Flash On Off Off Flash On
50-75% Off Flash On On Off Flash On On
≥75% Flash On On On Flash On On On
Running On Flash
lights
● Status indication
System Operating Run Alm Soc Illustrate
status status
Shut Off Off Off All off Off Off
Sleep
down
Flash 1 Off According to the power display Standby
Normal
Stand by mode
Alarm Flash 1 Flash 1 According to the power display
Off According to the power display Highest
Charge Normal On
LED Flash
第 9 页 共 14 页
2
Flash 2 According to the power display Highest
Over current
On LED Flash
alarm
2
Over voltage Flash 1 Off Off Off Off Off
protection
Temperature, Flash 1 Off Off Off Off Off
over current
protection
Flash 3 Off According to the power display According
to the
Normal power of
the light
display
Alarm Flash 3 Flash 3 According to the power display
On Off Off Off Off Stop
discharging,
Protection
Discharge no action
against
after 48hh
temperature,
Off when
over current,
charging
short circuit,
offline,
etc.
forced to
sleep
Under Off Off Off Off Off Stop
voltage Off discharging
protection
● Parallel dial is attached
Wall-Mounted Residential Energy Storage Cabinet Version A0
8. Functional description
● Standby state: After the BMS is correctly connected and powered on, in the
absence of over-voltage, under-voltage, over-current, short-circuit, over-temperature,
under-temperature and other protection states, Press the reset button once to turn it
on, and the BMS is in standby mode. In the standby state of the BMS , the running
light flashes, and the battery can be charged and discharged.
● Cell overcharge protection and recovery: When any cell of the battery is higher than the
set value of the cell overcharge protection, the BMS enters the overcharge protection state,
and the charging electricity The device cannot charge the battery. After the cell over
voltage protection, when the highest cell voltage drops below the cell overcharge
recovery value, the overcharge protection status will be released. It can also be released
by discharge.
● When the battery voltage is higher than the total voltage overcharge protection
setting value, the BMS enters the overcharge protection state, and the charging
device cannot charge the battery. Dang Zong When the voltage drops below the total
第 10 页 共 14 页
voltage overcharge recovery value, the overcharge protection state will be released.
It can also be released by discharge.
● Single over-discharge protection and recovery: When any cell of the battery is lower
than the set value of the single over-discharge protection, the BMS enters the over-
discharge protection state, and the negative The load cannot discharge the battery. After
maintaining communication for 1 minute, the BMS shuts down. After the over-discharge
protection occurs, charging the battery pack can release the over-discharge protection
status. state . Or press the reset button once, and the BMS will start up to check whether
the voltage of the battery pack has reached the recovery value.
● Discharge over-current protection and recovery: When the discharge current exceeds
the set value of discharge over-current protection, and the delay time is reached. BMS
enters discharge over Current protection, the load cannot charge the battery. After the
discharge over current protection occurs, the BMS automatically delays recovery and re
-detects the external load current . Charging can also release the discharge over current
protection. The discharge over current protection has two levels of protection, and the
transient over current protection is the same as the discharge over current protection.
complex . When the number of transient over current protection occurrences reaches the
condition, it will be locked, and the recovery must be turned off and turned on or
released from charging.
● Temperature protection and recovery: BMS has 4 temperature detection ports, and
monitors temperature changes to achieve protection measures.
● Charge and discharge high/low temperature protection and recovery: When charging
and discharging, any one of the 4 cell NTCs is higher than the high/low temperature
protection setting value , the BMS enters high temperature/low temperature protection.
The BMS stops charging or discharging. When the cell temperature is lower than the
high/low temperature recovery value, the BMS recovers charge or discharge.
● Equalization function: BMS has standby and charging equalization functions, BMS
system adopts energy consumption equalization circuit, equalizes open voltage
software Adjustable , any section of the equilibrium opening condition is higher than
the equilibrium opening pressure and the pressure difference reaches the condition
together. When charging is stopped or the cell voltage difference is less than
Equalization stops at the set value.
● Power on, power off
NO. Function Definition
When the BMS is in the dormant state, press the reset
button once, the BMS will be started, and the LED
1 boot/start
indicator will After flashing sequentially , it turns to
normal working state.
When the BMS is in the standby or discharging state,
shutdown/hiberna press this button for 3s, the BMS will be dormant, After
2
te the LED indicators flash one by one, it enters the sleep
state. BMS after sleep none power consumption.
第 11 页 共 14 页
9. Battery pack electrical performance test
9.1. Standard test conditions
Ambient temperature: 15~35℃
Relative humidity: 45%~75%
Atmospheric pressure: 86~106 Kpa
9.2. Test equipment requirements
Th e ac cu r a cy of th e mea s u r i n g in st r u m en t sh a l l no t be les s th an 0. 0 1 mm .
Th e ac cu r a cy of th e mu l t i met e r to mea s u r e vo l t a ge an d cu r r e n t sh o ul d no t be lo w e r
th an 0. 5 .
I nt er n al re si s t a n ce tes t e r sh o u l d be th e AC im p e d an c e met h o d (m e a su r em en t
fr eq u e nc y : 10 0 0 Hz ).
T he ba t t e r y te st sy s t e m sh o u l d be ab ov e ± 0. 1 % , th e co n s t a n t vo l t a g e acc u r ac y sh o u l d
be ± 0. 5 % , an d th e ti m i n g ac cu r a cy sh o ul d no t be lo w e r th an ± 0. 1 % .
Th e ac cu r a cy of th e in st r u m en t us e d to mea s u r e tem p er at u r e sh ou l d no t be le ss tha n
± 0. 5 ° C .
第 12 页 共 14 页
Wall-Mounted Residential Energy Storage Cabinet Version A0
9.3. Electrical performance test
Test items Test Methods Test standard
Standard charging: under the condition of 25°C ±
Standard 3°C, charge with constant current and constant voltage
discharge 50 A to 58.4 V , cut-off current 5 A ;
capacity Stand still for 5 minutes ; Di scharge
capacity ≥ 103 Ah
volume Discharge : 50 A constant current discharge to 44.8
test V cut-off;
Record the discharge capacity.
Use an internal resi stance tester to test the
Internal total internal resi stance of the total positive Internal
resistance test and total negative output terminals of the resistance≤30mΩ
power battery system ≤30m Ω
Use a voltmeter to test the leakage of the total
positive and total negative of the battery pack to the
casing voltage ; test conditions: normal temperature
and pressure;
Catch wire method: total positive test: the
positive terminal of the test instrument is connected to Leakage
Leakage test
the total positive terminal of the battery pack, and the voltage≤2V
negative terminal is connected to the battery pack
Shell ; total negative test: the positive terminal of the
test instrument is connected to the shell, and the
negative terminal is connected to the negative terminal
of the battery pack.
10. Maintenance and troubleshooting
A. Regularly (6 months) clean the battery dust and check whether the battery connection wires are loose.
B. When there is no power failure for a long time, it is recommended to artificially discharge the battery
every 6 months .
C. If the battery is found to be poor, the entire battery pack should be replaced in time and early .
D. Try to avoid deep discharge of the battery, and the recommended cut-off discharge voltage is 45 V.
第 13 页 共 14 页
Wall-Mounted Residential Energy Storage Cabinet Version A0
11. List of key raw materials
Product name Product specification description Quantity Remark
Honeycomb LFP 106 Ah (
Batteries 3.2V/106Ah 16pcs
CV 11)
15 strings/16 strings 100 A -
BMS P16S100A-ZC31403-10A-ZJ 1 set
BMS
Chassis metal case（9003high gloss white） 1 set
Fixed bracket Mental fixing bracket 1 set
Communication
6 standard network cable - 1 meter long 1 root
network cable
Red and black wires - 1 meter long
Parallel cable 2 sticks
(including terminals )
11. Package
12.1 Carton packaging size：600*550*250mm，as shown in the figure
12.2 Wooden box packaging size：design according to the actual situation
第 14 页 共 14 页
