F.R.L.

combination Standard White Series

C1000/C2000/C2500-W
F.R.L.
C3000/C4000/C6500/C8000-W Series
Space-saving with integrated filter, regulator and lubricator
F.R.
● Port size: 1/8 to 1
F (Filtr)
JIS symbol
R (Reg)
L (Lub)
Drain
Separ
Mech
Specifications 1 MPa ≈ 145.0 psi, 1 MPa = 10 bar
Press SW Item C1000-W C2000-W C2500-W C3000-W C4000-W C6500-W C8000-W
Res press
exh valve
SlowStart
Anti-bac/Bac-
remove Filt Appearance
Film
Resist FR
Oil-ProhR
Med
Press FR
No Cu/ Air filter F1000-W F2000-W F3000-W F3000-W F4000-W F6000-W F8000-W
PTFE FRL Components Regulator R1000-W R2000-W R2000-W R3000-W R4000-W R6000-W R8000-W
Outdrs FRL Lubricator L1000-W L3000-W L3000-W L3000-W L4000-W L8000-W L8000-W
Adapter Working fluid Compressed air
Joiner
Press Max. working pressure MPa 1.0 (≈150 psi, 10 bar) *2
Gauge
Proof pressure MPa 1.5 (≈220 psi, 15 bar)
CompFRL
Ambient / fluid temperatures °C 5 (41°F) to 60 (140°F)
LgFRL Filtration rating μm 5
PrecsR Set pressure MPa 0.05 to 0.85 *2 0.05 (≈7.3 psi, 0.5 bar) to 0.85 (≈120 psi, 8.5 bar)

VacF/R Min. drip flow rate (*1) m /min(ANR)

3
0.015 0.03 0.03 0.03 0.065 0.065 0.065
Pressure relief With relief mechanism
Clean FR
Oil storage capacity cm3 20 85 85 85 170 170 170(MAX 360)
ElecPneuR Drain capacity cm 3
12 25 45 45 80 80 80 (*3)
AirBoost Oil used Turbine oil Class 1 ISO VG32 (spindle oil cannot be used)
1/8,1/4 1/4,3/8 1/4,3/8 1/4,3/8 1/4,3/8,1/2 3/4,1 3/4,1
Speed Ctrl Port size Rc,NPT,G
(3/8 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (3/4 uses an adaptor) (1 1/4 uses an adaptor) (1 1/4 uses an adaptor)
Silncr
Weight kg 0.40 1.01 1.01 1.15 1.79 3.64 4.5
CheckV/
other Standard accessories Pressure gauge, bracket, bowl guard
Fit/Tube *1: The min. drip flow is that at which five drops of turbine oil drip per minute at the set pressure of 0.5 MPa.
*2: When using the C1000-W Series “F1” with auto-drain, the min. working pressure is 0.2 MPa and max. working pressure is 0.7 MPa.
Nozzle Refer to the max. working flow rate table (page 106) for F1000-W-F1 auto-drain for the max. working flow rate. Set the working flow rate to
less than or equal to the max. working flow rate.
Air Unit *3: Up to 170 cm3 is stored with the manual drain cock only.
*4: In the case of “F” or “FF” with auto-drain, the min. working pressure of auto-drain is 0.1 MPa. Air is purged with initial drain until pressure reaches 0.1 MPa.
PrecsCompn
*5: In the case of “F1” or “FF1” with auto-drain, the min. working pressure of auto-drain is 0.15 MPa.
Electro *6: When element option “Y” is selected, refer to the max. working flow rate table (page 108) for the max. flow rate. Set the working flow rate to
Press SW
less than or equal to the max. working flow rate.
ContactSW *7: C2000-W Series with “F1” (with auto-drain) must be used at equal to or less than the max. working flow rate. (Refer to the F2000-W section
on page 106 for max. flow rate.)
AirSens
PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
34
 F.R.L. Combination
Specifications
Option weight F.R.L.
* Add to the weight of the standard accessories. Unit: kg
F.R.
Drain discharge Bowl material Press.gauge Pipe adaptor set
Code F (Filtr)
F F1 FF FF1 C M M1 T* A6*W A8*W A10*W A15*W A20*W A25*W A32*W
C1000 0.007 0 0 0.09 0.09 0.09 R (Reg)
C2000 0.02 0 0.2 0 0.16 0.16 0.16
L (Lub)
C2500 0.02 0 0.2 0.2 0 0.16 0.16 0.16 Drain
C3000 0.02 0.02 0 0.2 0.2 0 0.16 0.16 0.16 Separ
Mech
C4000 0.02 0.02 0 0.2 0.2 0 0.16 0.16 0.16 0.16 Press SW
C6500 0.02 0.02 0 0.2 0.2 0 0.53 0.53 0.53 Res press
exh valve
C8000 0.02 0.02 0.02 0.02 0 0.2 0.2 0 0.53 0.53 0.53
SlowStart
Assembled components Pressure gauge Anti-bac/Bac-
Code
D S P V K G45P G49P G59P G40P G52P R2 remove Filt
Film
C1000 0.056 0.15 0.18 0.074 0.086 0.115 0.085 0.15 0.04 Resist FR
C2000 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.085 0.15 0.04 Oil-ProhR
C2500 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04 Med
Press FR
C3000 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
No Cu/
C4000 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04 PTFE FRL
C6500 0.45 0.51 0.9 0.074 0.086 0.115 0.085 0.15 0.04 Outdrs FRL
C8000 0.45 0.51 0.9 0.074 0.086 0.115 0.085 0.15 0.04 Adapter
Joiner
Press
Gauge
CompFRL
LgFRL
PrecsR
VacF/R
Clean FR
ElecPneuR
AirBoost
Speed Ctrl
Silncr
CheckV/
other
Fit/Tube
Nozzle
Air Unit
PrecsCompn
Electro
Press SW
ContactSW
AirSens
PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
35
 F.R.L. Combination
F.R.L. How to order Refer to page 30 for the explanation of the option.
A Model No. *1
F.R. C1000 6 W C U DSV A6W

C1000

C2000

C2500

C3000

C4000

C6500

C8000
F (Filtr) Code Description
B Port size
R (Reg)
B Port size 6 1/8 ●
A Model No.
L (Lub) 8 1/4 ● ● ● ● ●
*2
Drain 10 3/8 ● ● ● ●
Separ 15 1/2 ●
Mech 20 3/4 ● *1 ● ●
Press SW 25 1 ● ●
Res press
exh valve C Port thread *2
C Port thread Blank Rc thread ● ● ● ● ● ● ●
SlowStart N NPT thread ● ● ● ● ● ● ●
Anti-bac/Bac- G G thread ● ● ● ● ● ● ●
remove Filt
Film D Option *3
Resist FR D Option Blank Filter with manual drain cock, lubricator without manual cock ● ● ● ● ● ● ●

Flow Pressure Pressure Pressure Diff press Element Bowl material Drain discharge *4
C Lubricator with manual cock ● ● ● ● ● ● ●
Oil-ProhR
F Filter/auto-drain with manual override (NO: Exhaust when not pressurized) ● ● ● ● ●
Med F1 Filter/auto-drain with manual override (NC: No exhaust when not pressurized) ● ● ● ● ● ● ●
Press FR
FF Filter/large auto-drain with manual override (NO: Exhaust when not pressurized) ●
No Cu/
PTFE FRL FF1 Filter/large auto-drain with manual override (NC: No exhaust when not pressurized) ●
E Assembled components Blank Polycarbonate bowl ● ● ● ● ● ● ●
Outdrs FRL Z Nylon bowl ● ● ● ● ● ● ●
Adapter M Metal bowl ● ● ● ● ●
Joiner M1 Metal bowl with manual drain cock*5 ● ● ● ● ● ●
Press
F Display unit Blank 5 μm ● ● ● ● ● ● ●
Gauge
*11 Y 0.3 μm (submicron) *6 ● ● ● ● ●
CompFRL Blank Without differential pressure detection port ● ● ● ● ● ● ●
relief range detect

Q With differential pressure detection port (Rc1/4) ● ●

LgFRL G Pipe adaptor Blank 0.05 to 0.85 MPa ● ● ● ● ● ● ●

PrecsR set (included) L 0.05 to 0.35 MPa *7 ● ● ● ● ● ● ●

Blank With relief mechanism ● ● ● ● ● ● ●
VacF/R Precautions for model No. selection N Non-relief ● ● ● ● ● ● ●
Blank With standard pressure gauge (G401-W) ● ● ● ● ● ● ●
direction gauge

Clean FR *1:  Pipe adaptor A400-20*-W is assembled on both ends of T No pressure gauge (gauge port (1/4) is assembled sealed) ● ● ● ● ● ● ●
C4000-20*-W. A20*W does not need to be selected for the T8 Pressure gauge ready (gauge port (1/4) is left open) ● ● ● ● ● ● ●
ElecPneuR pipe adaptor set. Blank Standard flow (left → right) ● ● ● ● ● ● ●

AirBoost *2:  G threads and NPT threads are available for IN, OUT, X1 Reverse flow (right → left) ● ● ● ● ● ● ●
gauge port and drain outlet (metal bowl with auto-drain).
E Assembled components Pages 166 to 171, 182 to 187, 348 and 349
Speed Ctrl Attachments P and V are also included.
Blank Without assembled component ● ● ● ● ● ● ●
*3:  Select options for the drainage, bowl material, element,
Silncr U Assembled component *8 ● ● ● ● ● ● ●
differential pressure detection and regulator. When
D Distributor (D101-W, D401-W, D801-W) ● ● ● ● ● ● ●
CheckV/ selecting options for several items, list options in order from
component
Assembled

S Pressure switch (P1100-W, 4100-W, 8100-W) ● ● ● ● ● ● ●

other the top.
P Pressure switch (P4000-W) ● ● ● ●
Fit/Tube *4:  Refer to page 354 for the auto-drain usage V Residual pressure exhaust valve (V1000-W, 3000-W) ● ● ● ● ●
conditions.
K Residual pressure exhaust valve with keyhole (V3010-W, V6010-W) ● ● ● ● ● ●
Nozzle *5:  When selecting option “M1”, select the drain discharge
option “C”. F Display unit
Air Unit *6: Refer to page 108 for max. processing flow rate Blank MPa display (Rc thread), psi display (NPT thread), bar display (G thread) ● ● ● ● ● ● ●
when option “Y” is selected. J1 MPa display (NPT, G thread) ● ● ● ● ● ● ●
PrecsCompn *7:  The pressure gauge’s indication range is
G Pipe adaptor set (included) Page 350 *9
Electro 0 to 0.4 MPa for the option “L”.
Blank Not included ● ● ● ● ● ● ●
Press SW *8: Installation position for assembled components
A6*W 1/8 pipe adaptor set ●
ContactSW Code Attachment Install positions Compatible model A8*W 1/4 pipe adaptor set ● ● ● ● ●
D F+(D)+R+L C1000-W to C8000-W A10*W 3/8 pipe adaptor set ● ● ● ● ●
AirSens
S C1000-W to C8000-W (“P” excludes A15*W 1/2 pipe adaptor set ● ● ● ●
PresSW F+R+(S,P)+L
or P 1000, 6000 and 8000 Series) A20*W 3/4 pipe adaptor set ● ● ●
Cool
C1000-W to C8000-W (“V” A25*W 1 pipe adaptor set ● ●
Air Flo V
Sens/Ctrl F+R+L+(V,K) excludes 6000 and 8000 Series A32*W 1 1/4 pipe adaptor set ● ●
or K
and “K” excludes 1000 Series) Adaptor thread
WaterRtSens ● ● ● ● ● ● ●
Note) Indicate “U”+“D”, “S”,“P”,“V” and “K” when selecting an Blank Rc thread
TotAirSys N NPT thread ● ● ● ● ● ● ●
assembled component.
(Total Air) ● ● ● ● ● ● ●
TotAirSys Use customized combination specifications sheet for any G G thread

(Gamma) other combination. H Other attachments

Gas *9:  The joiner set is enclosed with the pipe adaptor set. H Attachment Blank Not included ● ● ● ● ● ● ●
generator *10: The pressure gauge option (included) can be selected only PW Pressure switch (P4000-W) + joiner set ● ● ● ●

RefrDry when C Port thread is Rc thread. VW Residual pressure exhaust valve (V1000-W, V3000-W) + joiner set ● ● ● ● ●
*11: Display unit options when selecting NPT threads: If Blank is
I Pressure gauge option (included) Page 363 *10
DesicDry selected, the pressure unit is psi and the temperature
I Pressure Blank Not included ● ● ● ● ● ● ●
display unit is °F.
HiPolymDry gauge option G45P G45D-8-P10(L:G45D-8-P04) ● ● ● ● ● ● ●
When G thread and Blank display unit option are selected,
(included) G49P G49D-8-P10(L:G49D-8-P04) ● ● ● ● ● ● ●
the pressure unit will be bar and the temperature display
MainFiltr unit will be °C. G59P G59D-8-P10(L:G59D-8-P04) ● ● ● ● ● ●

Dischrg G40P G40D-8-P10(L:G40D-8-P04) ● ● ● ● ● ● ●

When NPT/G thread and “J1” display unit option are
etc G52P G52D-8-P10(L:G52D-8-P10) ● ● ● ● ● ● ●
selected, the pressure unit will be MPa and the temperature
display unit will be °C.
Ending
36
 F.R.L. Combination
Flow characteristics
Flow characteristics F.R.L.
● C1000-6-W ● C1000-8-W ● C2000-8-W F.R.
0.7
Secondary pressure (MPa)

Secondary pressure (MPa)

Primary pressure 0.7 MPa Primary pressure 0.7 MPa F (Filtr)

Secondary pressure (MPa)

0.6
0.6 Primary pressure 0.7 MPa
0.5 0.6
0.5
0.4 0.5 R (Reg)
0.4
0.4
0.3
0.3 0.3 L (Lub)
0.2 Drain
0.2 0.2
0.1 Separ
0.1 0.1
0 Mech
0 0 Press SW
0.5 1.0 1.5 0.5 1.0 1.5 0.5 1 1.5 2 2.5
Res press
Air flow rate (m /min (ANR))3
Air flow rate (m /min (ANR))
3
Air flow rate (m3/min (ANR)) exh valve
SlowStart
● C2000-10-W ● C2500-8-W ● C2500-10-W Anti-bac/Bac-
0.7 0.7 0.7 remove Filt

Secondary pressure (MPa)

Secondary pressure (MPa)

0.6 Primary pressure 0.7 MPa Secondary pressure (MPa) 0.6 Primary pressure 0.7 MPa 0.6 Primary pressure 0.7 MPa Film
Resist FR
0.5 0.5 0.5
0.4 0.4 0.4 Oil-ProhR
0.3 0.3 0.3 Med
Press FR
0.2 0.2 0.2
No Cu/
0.1 0.1 0.1 PTFE FRL
0 0 0
0.5 1 1.5 2 2.5 3 0.5 1 1.5 2 2.5 0.5 1 1.5 2 2.5 3 Outdrs FRL
Air flow rate (m3/min (ANR)) Air flow rate (m /min (ANR))
3
Air flow rate (m3/min (ANR)) Adapter
Joiner
Press
● C3000-8-W ● C3000-10-W ● C4000-8-W Gauge
CompFRL

Secondary pressure (MPa)

Secondary pressure (MPa)

Secondary pressure (MPa)

0.6 0.6 0.6 Primary pressure 0.7 MPa

Primary pressure 0.7 MPa Primary pressure 0.7 MPa
0.5 0.5 0.5 LgFRL
0.4 0.4 0.4
0.3
PrecsR
0.3 0.3
0.2 0.2 0.2 VacF/R
0.1 0.1 0.1
0
Clean FR
0 0
0.5 1.0 1.5 2.0 2.5 1.0 2.0 3.0 4.0 5.0 0.5 1.0 1.5 2.0 2.5
Air flow rate (m3/min (ANR)) ElecPneuR
Air flow rate (m3/min (ANR)) Air flow rate (m3/min (ANR))
AirBoost
● C4000-10-W ● C4000-15-W ● C6500-20-W Speed Ctrl
0.7
Silncr
Secondary pressure (MPa)

Secondary pressure (MPa)

Secondary pressure (MPa)

0.6 0.6
Primary pressure 0.7 MPa Primary pressure 0.7 MPa 0.6 Primary pressure 0.7 MPa
0.5 0.5 CheckV/
0.5
other
0.4 0.4 0.4
0.3 0.3 Fit/Tube
0.3
0.2 0.2 0.2 Nozzle
0.1 0.1 0.1
0 0 0
Air Unit
1.0 2.0 3.0 4.0 5.0 1.0 2.0 3.0 4.0 5.0 1 2 3 4 5 6 7 8 9 10
Air flow rate (m /min (ANR))
3
Air flow rate (m /min (ANR))
3
PrecsCompn
Air flow rate (m3/min (ANR))
Electro
Press SW
● C6500-25-W ● C8000-20-W ● C8000-25-W ContactSW
0.7
Primary pressure 0.7 MPa Primary pressure 0.7 MPa AirSens
Secondary pressure (MPa)

Secondary pressure (MPa)

Secondary pressure(MPa)

0.6 Primary pressure 0.7 MPa 0.6 0.6

0.5 PresSW
0.5 0.5
Cool
0.4 0.4 0.4 Air Flo
0.3 0.3 0.3 Sens/Ctrl
0.2 0.2 0.2
WaterRtSens
0.1 0.1 0.1
TotAirSys
0 (Total Air)
1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
TotAirSys
Air flow rate (m3/min (ANR)) Air flow rate (m3/min (ANR)) Air flow rate (m3/min (ANR)) (Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
37
 F.R.L. Combination
F.R.L. Dimensions
F.R. ● C1000-W
F (Filtr)
11 7.5
R (Reg) 7.5
163
P Attachment
L (Lub) 120

10 5.5
A□W (Pipe adaptor set)
40 36 40 40
Drain
Separ
Mech

(45)
Press SW
Q
45
35

Res press
exh valve IN OUT Enlarged view of bracket section
SlowStart
Anti-bac/Bac-
45

Port size
55

remove Filt
Film Rc1/8(6)

88
98

Resist FR Rc1/4(8)
Attachment · ‌Dimensions of options
Oil-ProhR (pressure gauge) With auto-drain (F1)
Med
Press FR Bore size ø4 Tube center
No Cu/ Soft nylon Maintenance

65
PTFE FRL Maintenance tube dimensions
40

Outdrs FRL dimensions Drain outlet

Adapter

92
Joiner
Press
Gauge Pressure gauge attached optional
dimensions table
CompFRL
Pressure gauge P Q
LgFRL G45P (74) ø39 M5
G49P (73.5) ø43.5 Drain outlet
PrecsR
G59P (76) ø52
VacF/R
G40P (75.5) ø42.5
Clean FR G52P (86) ø52.5
ElecPneuR
AirBoost
● C2000-W
Speed Ctrl
Silncr
CheckV/
other
P
Fit/Tube 203
Nozzle 45 35.5 163 Attachment
(Pipe adaptor set)
Air Unit 7
50 50
PrecsCompn
Electro
Press SW
Q
55

(46)
1.5
45

ContactSW
IN OUT
AirSens
Port size
PresSW
60

Cool Rc1/4(8)
70

Air Flo Rc3/8(10)

123.5

Sens/Ctrl
WaterRtSens
147

Attachment
TotAirSys (pressure gauge)
(Total Air)
TotAirSys
(Gamma)
Gas
generator
Maintenance
dimensions
Maintenance
dimensions

RefrDry
90
60

Pressure gauge attached optional

DesicDry
dimensions table
HiPolymDry Pressure gauge P Q
Bore size ø5.7 to ø6
MainFiltr Soft nylon tube G45P (73.5) ø39
Dischrg Bore size ø5 G49P (73) ø43.5
etc Soft vinyl tube
G40P (75) ø42.5
Drain outlet
Ending G52P (85.5) ø52.5

38
 F.R.L. Combination
Dimensions
Dimensions F.R.L.
● C2500-W F.R.
F (Filtr)
R (Reg)
P 216
176 14 7 L (Lub)
45 35.5 Attachment Drain

7
7 63 50 A□W (Pipe adaptor set) Separ
Mech
Press SW
Res press
Dimensions of bracket section exh valve
Q
55

(46)
SlowStart
45

IN OUT Anti-bac/Bac-
remove Filt
Film
Resist FR
60
70

Port size
Rc1/4(8)
Oil-ProhR

123.5
Rc3/8(10) Med
Attachment Press FR
148

No Cu/
(pressure gauge)
PTFE FRL
Outdrs FRL
Bore size ø5.7 to ø6 Adapter
Soft nylon tube Joiner

90 Maintenance dimensions
Bore size ø5 Press
Pressure gauge attached optional dimensions table
60 Maintenance

Soft vinyl tube Gauge

dimensions

Drain outlet Pressure gauge P Q CompFRL

G45P (73.5) ø39
LgFRL
G49P (73) ø43.5
G59P (75.5) ø52 PrecsR
G40P (75) ø42.5 VacF/R
G52P (85.5) ø52.5
Clean FR
ElecPneuR
AirBoost
● C3000-W
Speed Ctrl
14
7 Silncr
P CheckV/

7
229
other
45 (34.5) 189 Attachment
63 63 A□W (Pipe adaptor set)
Fit/Tube
Nozzle
Enlarged view of bracket section Air Unit
Q
55

(46)
45

PrecsCompn
IN OUT Electro
Press SW
ContactSW
60
70

2.5

Port size
Rc1/4(8) AirSens
123.5

Rc3/8(10) PresSW
Attachment Cool
(pressure gauge) Air Flo
Sens/Ctrl
148

Bore size ø5.7 to ø6

WaterRtSens
Soft nylon tube TotAirSys
Bore size ø5 (Total Air)
Maintenance TotAirSys
90

Soft vinyl tube

dimensions (Gamma)
Drain outlet Gas
60

Maintenance generator
dimensions
RefrDry
Pressure gauge attached optional dimensions table
DesicDry
Pressure gauge P Q
HiPolymDry
●R
G45P (70) ø39
 efer to page 113 for dimensions of the metal bowl option filter,
and to page 158 for the lubricator. G49P (69.5) ø43.5 MainFiltr
G59P (72) ø52 Dischrg
etc
G40P (71.5) ø42.5
G52P (82) ø52.5 Ending
39
 F.R.L. Combination
F.R.L. Dimensions
F.R. ● C4000-W
F (Filtr)
14
280 7
R (Reg) P Rc3/4:290
55 (42.5)

7
L (Lub) 240 Attachment
80 80 A□W (Pipe adaptor set)
Drain
Separ
Mech
Press SW
Q
55

(47)
45

Res press
exh valve Enlarged view of bracket section
IN OUT
SlowStart
Anti-bac/Bac-
60

2.5

Port size
70

remove Filt
Film Rc1/4(8)
Resist FR Rc3/8(10)

149
Attachment Rc1/2(15)
Oil-ProhR (pressure gauge) Rc3/4(20)
Med
Press FR
171

No Cu/ Bore size ø5.7 to ø6

PTFE FRL Soft nylon tube
Bore size ø5

115
Outdrs FRL Soft vinyl tube
Adapter Drain outlet Maintenance dimensions
60

Joiner
Press Maintenance dimensions
Gauge Pressure gauge attached optional dimensions table

CompFRL Pressure gauge P Q

G45P (75) ø39
LgFRL ● Refer to page 113 for dimensions of the metal bowl option filter, G49P (74.5) ø43.5
and to page 158 for the lubricator.
PrecsR G59P (77) ø52
G40P (76.5) ø42.5
VacF/R
G52P (86) ø52.5
Clean FR
ElecPneuR
AirBoost ● C6500-W
Speed Ctrl
Silncr 350
Rc1 1/4:356
CheckV/
other P 280 20
Attachment 8
90 90 14
Fit/Tube 65 52.5 A□W (Pipe adaptor set)

Nozzle
54

Air Unit
65

15
50

.2
.4 .6
.8
OUT
PrecsCompn Dimensions of bracket section
Q

1.0

IN
MPa

Electro Port size

70

Press SW
85

Attachment Rc3/4(20)
ContactSW (pressure gauge) Rc1(25)

AirSens
210

228

PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
60

(Total Air) Bore size ø5.7 to ø6

TotAirSys Maintenance dimensions Soft nylon tube
(Gamma) Bore size ø5
115

Gas Maintenance
Soft vinyl tube
generator dimensions
Drain outlet Pressure gauge attached optional dimensions table
RefrDry
Pressure gauge P Q
DesicDry G45P (80) ø39
HiPolymDry G49P (79.5) ø43.5
G59P (82) ø52
MainFiltr
Dischrg G40P (81.5) ø42.5
etc G52P (93) ø52.5

Ending
40
 F.R.L. Combination
Option assembly dimensions
Dimensions F.R.L.
● C8000-W 370
F.R.
Rc1 1/4:376 20 F (Filtr)
P 300
Attachment 14 R (Reg)
65 52.5 8
100 100 A□W (Pipe adaptor set)

15
L (Lub)
Drain

9
Separ
65

Q
50

54
Mech
IN OUT
Press SW
Res press
Dimensions of bracket section exh valve
70

Port size
85

Rc3/4(20) SlowStart
Rc1(25) Anti-bac/Bac-
remove Filt

228
Pressure gauge attached optional dimensions table Film
250

Resist FR
Pressure gauge P Q Oil-ProhR
Attachment Bore size ø5.7 to ø6 G45P (85) ø39
(pressure gauge) Soft nylon tube Med
Bore size ø5 G49P (84.5) ø43.5 Press FR
No Cu/
Soft vinyl tube Maintenance G59P (87) ø52 PTFE FRL

115
Drain outlet dimensions G40P (86.5) ø42.5
60

Maintenance dimensions
Outdrs FRL
G52P (98) ø52.5 Adapter
● Refer to page 113 for dimensions of the metal bowl option filter, Joiner
and to page 158 for the lubricator. Press
Gauge

Option assembly dimensions CompFRL

LgFRL
● C1000-W to C8000-W
PrecsR
VacF/R
A

Model No. A B
C1000-W 35 45 Clean FR
C2000-W ElecPneuR
B

C2500-W
45 60 AirBoost
C3000-W
C4000-W Speed Ctrl
C6050-W Silncr
50 70
C8000-W CheckV/
other
L1 L2
Fit/Tube
L3
Nozzle
Assembled option D S P V K DS DP DV DK Air Unit
Model No. L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3
C1000-W 40 68 148 40 68 148 - - - 40 80 160 - - - 40 96 176 - - - 40 108 188 - - -
PrecsCompn
Electro
C2000-W 50 81.5 194.5 50 81.5 194.5 50 130 243 50 113 226 50 113 226 50 113 226 50 161.5 274.5 50 144.5 257.5 50 144.5 257.5 Press SW
C2500-W 63 81.5 207.5 63 81.5 207.5 63 130 256 63 113 239 63 113 239 63 113 239 63 161.5 287.5 63 144.5 270.5 63 144.5 270.5 ContactSW
C3000-W 63 94.5 220.5 63 94.5 220.5 63 143 269 63 126 252 63 126 252 63 126 252 63 174.5 300.5 63 157.5 283.5 63 157.5 283.5
AirSens
C4000-W 80 111.5 271.5 80 111.5 271.5 80 160 320 80 160 303 80 160 303 80 143 303 80 191.5 351.5 80 191.5 334.5 80 191.5 334.5
*1
PresSW
C4000-20-W 100 111.5 311.5 100 111.5 311.5 100 160 360 100 160 343 100 160 343 100 143 343 100 191.5 391.5 100 191.5 374.5 100 191.5 374.5 Cool
C6500-W 90 140 330 90 140 330 - - - - - - 90 190 370 90 190 380 - - - - - - 90 240 420 Air Flo
Sens/Ctrl
C8000-W 100 150 350 100 150 350 - - - - - - 100 200 390 100 200 400 - - - - - - 100 250 440
WaterRtSens
Assembled option DSV DSK DPV DPK SV SK PV PK
TotAirSys
Model No. L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 (Total Air)
C1000-W 40 136 216 - - - - - - - - - 40 100 188 - - - - - - - - - TotAirSys
(Gamma)
C2000-W 50 176 289 50 176 289 50 224.5 337.5 50 224.5 337.5 50 144.5 257.5 50 144.5 257.5 50 193 306 50 193 306 Gas
C2500-W 63 176 302 63 176 302 63 224.5 350.5 63 224.5 350.5 63 144.5 270.5 63 144.5 270.5 63 193 319 63 193 319 generator
C3000-W 63 189 315 63 189 315 63 237.5 363.5 63 237.5 363.5 63 157.5 283.5 63 157.5 283.5 63 206 332 63 206 332 RefrDry
C4000-W 80 223 366 80 223 366 80 271.5 414.5 80 271.5 414.5 80 191.5 334.5 80 191.5 334.5 80 240 383 80 240 383 DesicDry
C4000-20-W *1 100 223 406 100 223 406 100 271.5 454.5 100 271.5 454.5 100 191.5 374.5 100 191.5 374.5 100 240 423 100 240 423
HiPolymDry
C6500-W - - - 90 290 470 - - - - - - - - - 90 240 420 - - - - - -
C8000-W - - - 100 300 490 - - - - - - - - - 100 250 440 - - - - - - MainFiltr
Dischrg
L1: Dimensions from the IN edge to center of the T type bracket mounting hole * Refer to page 346 for details on bracket mounting hole dimensions. etc
L2: ‌Spacing dimensions of the mounting hole from the first T type bracket *1: The pipe adaptor is assembled on the OUT side.
to the second T type bracket As well, the pipe adaptor A400-20-W is attached on both ends of C4000-20-W. Ending
L3: Dimensions from the IN edge to the OUT edge
41
 W.L. combination Standard White Series

F.R.L.
C1010/C2010/C3010/C4010/C8010-W Series
Integrated filter, regulator and lubricator
F.R.
● Port size: 1/8 to 1
F (Filtr)
JIS symbol
R (Reg)
L (Lub)
Drain
Separ
Mech
Specifications 1 MPa ≈ 145.0 psi, 1 MPa = 10 bar
Press SW Item C1010-W C2010-W C3010-W C4010-W C8010-W
Res press
exh valve
SlowStart
Anti-bac/Bac-
remove Filt
Film
Resist FR
Oil-ProhR
Appearance
Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Adapter
Joiner
Press
Gauge
Filter/regulator W1000-W W2000-W W3000-W W4000-W W8000-W
CompFRL Comps
Lubricator L1000-W L3000-W L3000-W L4000-W L8000-W
LgFRL Working fluid Compressed air
PrecsR Max. working pressure MPa 1.0 (≈150 psi, 10 bar) *2
Proof pressure MPa 1.5 (≈220 psi, 15 bar)
VacF/R
Ambient / fluid temperatures °C 5 (41°F) to 60 (140°F)
Clean FR Filtration rating μm 5
ElecPneuR Set pressure MPa 0.05 to 0.85 (*2) 0.05 (≈7.3 psi, 0.5 bar) to 0.85 (≈120 psi, 8.5 bar)
Min. drip flow rate (*1) m3/min(ANR) 0.015 0.03 0.03 0.065 0.065
AirBoost
Pressure relief With relief mechanism
Speed Ctrl Oil storage capacity cm3 20 85 85 170 170(MAX 360)
Silncr Drain capacity cm3 12 25 45 80 80 (*3)
CheckV/ Oil used Turbine oil Class 1 ISO VG32 (spindle oil cannot be used)
other 1/8,1/4 1/4,3/8 1/4,3/8 1/4,3/8,1/2 3/4,1
Port size Rc,NPT,G
Fit/Tube (3/8 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (3/4 uses an adaptor) (1 1/4 uses an adaptor)

Nozzle Weight kg 0.31 0.77 0.97 1.45 3.57

Standard accessories Pressure gauge, bracket, bowl guard
Air Unit *1: The min. drip flow is that at which five drops of turbine oil drip per minute at the set pressure of 0.5 MPa.
*2: When using C1010-W Series “F1” with auto-drain, the min. working pressure is 0.2 MPa and max. working pressure is 0.7 MPa.
PrecsCompn Refer to the max. working flow rate table (page 106) for F1000-W-F1 auto-drain for the max. working flow rate. Set the working flow rate to
Electro less than or 3equal to the max. working flow rate.
Press SW *3: Up to 170 cm is stored with the manual drain cock only.
*4: In the case of “F” or “FF” with auto-drain, the min. working pressure of auto-drain is 0.1 MPa. Air is purged with initial drain until pressure reaches 0.1 MPa.
ContactSW *5: In the case of “F1” or “FF1” with auto-drain, the min. working pressure of auto-drain is 0.15 MPa.
*6: When element option “Y” is selected, refer to the max. working flow rate table (page 108) for the max. flow rate. Set the working flow rate to
AirSens less than or equal to the max. working flow rate.
C2010-W Series with “F1” (with auto-drain) must be used at equal to or less than the max. working flow rate. (Refer to the F2000-W section
PresSW *7: on page 106 for max. flow rate.)
Cool
Air Flo Option weight
Sens/Ctrl * Add to the weight of the standard accessories. Unit: kg
WaterRtSens Code Drain discharge Bowl material Press.gauge Pipe adaptor set
TotAirSys F F1 FF FF1 C M M1 T* A6*W A8*W A10*W A15*W A20*W A25*W A32*W
(Total Air) C1010 0.007 0 0 0.09 0.09 0.09
TotAirSys
(Gamma) C2010 0.02 0 0.2 0 0.16 0.16 0.16
Gas C3010 0.02 0.02 0 0.2 0.2 0 0.16 0.16 0.16
generator C4010 0.02 0.02 0 0.2 0.2 0 0.16 0.16 0.16 0.16
RefrDry C8010 0.02 0.02 0.02 0.02 0 0.2 0.2 0 0.53 0.53 0.53
DesicDry Assembled components Pressure gauge
Code
HiPolymDry S P V K G45P G49P G59P G40P G52P R2
C1010 0.15 0.18 0.074 0.086 0.115 0.085 0.15 0.04
MainFiltr C2010 0.23 0.54 0.29 0.34 0.074 0.086 0.085 0.15 0.04
Dischrg C3010 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
etc
C4010 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
Ending C8010 0.51 0.34 0.074 0.086 0.115 0.085 0.15 0.04

42
 W.L. Combination
How to order
How to order F.R.L.
* ‌Refer to page 30 for the A Model No.
C1010 6 W C U SV A6W explanation of the option. F.R.

C1010

C2010

C3010

C4010

C8010
G Pipe adaptor set H Pressure gauge option (included) F (Filtr)
(included) Code Description
R (Reg)
B Port size
A Model No. B Port size 6 1/8 ● L (Lub)
8 1/4 ● ● ● ● Drain
10 3/8 ● ● ● Separ
15 1/2 ● Mech
Press SW
20 3/4 ● *1 ●
Res press
25 1 ● exh valve
C Port thread *2 SlowStart
C Port thread Blank Rc thread ● ● ● ● ● Anti-bac/Bac-
N NPT thread ● ● ● ● ● remove Filt
G G thread ● ● ● ● ● Film
Resist FR
D Option *3
D Option Oil-ProhR
Blank Filter with manual drain cock, lubricator without manual cock ● ● ● ● ●
Med
C Lubricator with manual cock ● ● ● ● ●
Press FR
Drain F Filter/auto-drain with manual override (NO: Exhaust when not pressurized) ● ● ● No Cu/
discharge F1 Filter/auto-drain with manual override (NC: No exhaust when not pressurized) ● ● ● ● ● PTFE FRL
FF Filter/large auto-drain with manual override (NO: Exhaust when not pressurized) ● Outdrs FRL
*4 FF1 Filter/large auto-drain with manual override (NC: No exhaust when not pressurized) ●
Adapter
Blank Polycarbonate bowl ● ● ● ● ● Joiner
Bowl Z Nylon bowl ● ● ● ● ● Press
material M Metal bowl ● ● ●
Gauge
M1 Metal bowl with manual drain cock*5 ● ● ● ● CompFRL
Blank 5 μm ● ● ● ● ●
Element LgFRL
Y 0.3 μm (submicron) *6 ● ● ●
Pressure Blank 0.05 to 0.85 MPa ● ● ● ● ● PrecsR
Range L 0.05 to 0.35 MPa *7 ● ● ● ● ●
Pressure Blank With relief mechanism ● ● ● ● ●
VacF/R
relief N Non-relief ● ● ● ● ● Clean FR
Blank With standard pressure gauge (G401-W) ● ● ● ● ●
Pressure
T No pressure gauge (gauge port (1/4) is assembled sealed) ● ● ● ● ●
ElecPneuR
gauge
T8 Pressure gauge ready (gauge port (1/4) is left open) ● ● ● ● ●
AirBoost
Flow Blank Standard flow (left → right) ● ● ● ● ●
Direction X1 Reverse flow (right → left) ● ● ● ● ● Speed Ctrl
E Assembled components Pages 166 to 171, 182 to 187, 348 and 349 Silncr
E Assembled components Blank Without assembled component ● ● ● ● ● CheckV/
F Display unit U Assembled component *8 ● ● ● ● ● other
S Pressure switch (P1100-W, 4100-W, 8100-W) ● ● ● ● ● Fit/Tube
component
Assembled

*11
Precautions for model No. selection P Pressure switch (P4000-W) ● ● ●
V Residual pressure exhaust valve (V1000-W, 3000-W) ● ● ● ● Nozzle
*1: Pipe adaptor A400-20*-W is assembled on both ends of K Residual pressure exhaust valve with keyhole (V3010-W, V6010-W) ● ● ● ●
C4010-20*-W. A20*W does not need to be selected for the pipe Air Unit
adaptor set. F Display unit
*2: G threads and NPT threads are available for IN, OUT, gauge port Blank MPa display (Rc thread), psi display (NPT thread), bar display (G thread) ● ● ● ● ●
PrecsCompn
and drain outlet (metal bowl with auto-drain). Attachments P and V Electro
J1 MPa display (NPT, G thread) ● ● ● ● ●
are also included. Press SW
*3: Select options for the drainage, bowl material, element, and G Pipe adaptor set (included) Page 350 *9
regulator. When selecting options for several items, list options in ContactSW
order from the top. Blank Not included ● ● ● ● ●
*4: Refer to page 354 for the auto-drain usage conditions. A6*W 1/8 pipe adaptor set ● AirSens
*5: When selecting option “M1”, select the drain discharge option “C”. A8*W 1/4 pipe adaptor set ● ● ● ● PresSW
*6: Refer to page 108 for max. processing flow rate when
option “Y” is selected. A10*W 3/8 pipe adaptor set ● ● ● ● Cool
*7: The pressure gauge’s indication range is 0 to 0.4 MPa for the A15*W 1/2 pipe adaptor set ● ● ●
Air Flo
option “L”. Sens/Ctrl
A20*W 3/4 pipe adaptor set ● ●
*8: Installation position for assembled components
A25*W 1 pipe adaptor set ● WaterRtSens
Code Installation position for attachments Compatible model TotAirSys
A32*W 1 1/4 pipe adaptor set ●
C1010-W to C8010-W (Total Air)
S or P W+(S,P)+L * Adaptor thread
(“P” excludes 8000 Series) TotAirSys
Blank Rc thread ● ● ● ● ● (Gamma)
C1010-W to C8010-W (“V”
V or K W+L+(V,K) excludes 8000 Series and N NPT thread ● ● ● ● ● Gas
“K” excludes 1000 Series) G G thread ● ● ● ● ● generator
Note) Indicate “U”+“S”, “P”,“V” and “K” when selecting an assembled H Pressure gauge option (included) Page 363 *10 RefrDry
component.
Blank Not included ● ● ● ● ●
Use customized combination specifications sheet for any other combination. DesicDry
*9: The joiner set is enclosed with the pipe adaptor set. G45P G45D-8-P10(L:G45D-8-P04) ● ● ● ● ●
*10: The pressure gauge option (included) can be selected only when G49P G49D-8-P10(L:G49D-8-P04) ● ● ● ● ● HiPolymDry
C Port thread is Rc thread.
G59P G59D-8-P10(L:G59D-8-P04) ● ● ● ●
*11: Display unit options when selecting NPT threads: If Blank is selected, MainFiltr
the pressure unit is psi and the temperature display unit is °F. G40P G40D-8-P10(L:G40D-8-P04) ● ● ● ● ●
When G thread and Blank display unit option are selected, the pressure Dischrg
G52P G52D-8-P10(L:G52D-8-P10) ● ● ● ● ●
unit will be bar and the temperature display unit will be °C. etc
When NPT/G thread and “J1” display unit option are selected, the
pressure unit will be MPa and the temperature display unit will be °C. Ending
43
 W.L. Combination
F.R.L. Dimensions
F.R. ● C1010-W 11 7.5
F (Filtr) 7.5

10 5.5
R (Reg)

when the knob

L (Lub)

Dimensions

is operated
Drain
Separ 123
Mech
Press SW Q 80 Enlarged view of
Res press 40 bracket section
exh valve 40 36
2.5
SlowStart · Optional dimensions
Anti-bac/Bac- With auto-drain (F1)
remove Filt Attachment
Film A□W (Pipe adaptor set) Tube center
68.5

Resist FR
R

Oil-ProhR
45
35

Med IN OUT
Press FR

92
No Cu/
PTFE FRL
45
55

Outdrs FRL Port size

Adapter Rc1/8(6)

88
98

Joiner Rc1/4(8)
Press M5
Gauge Drain outlet
Attachment
CompFRL (pressure gauge)
Pressure gauge attached optional dimensions table
65

LgFRL Bore size ø4 Maintenance Pressure gauge Q R

40

Soft nylon tube dimensions G45P (74) ø39

PrecsR Drain outlet Maintenance dimensions
G49P (73.5) ø43.5
VacF/R G59P (76) ø52
Clean FR G40P (75.5) ø42.5
G52P (86) ø52.5
ElecPneuR
AirBoost
● C2010-W
when the knob

Speed Ctrl
Dimensions

is operated

Silncr
P 153
CheckV/
other 45 35.5 113
Fit/Tube
3

7 50
Attachment
Nozzle (Pipe adaptor set)

Air Unit
88.5

PrecsCompn
Q
55

Electro
45

Press SW
IN OUT
ContactSW
Port size
AirSens
1.5
60

Rc1/4(8)
70

PresSW Rc3/8(10)
Cool
123.5

Air Flo Attachment

147

Sens/Ctrl
(pressure
WaterRtSens gauge)
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
Maintenance
Maintenance
dimensions

dimensions

generator
90

RefrDry
60

DesicDry Bore size ø5.7 to ø6 Pressure gauge attached optional dimensions table
HiPolymDry Soft nylon tube
Bore size ø5 Pressure gauge P Q
MainFiltr Soft vinyl tube G45P (73.5) ø39
Dischrg Drain outlet G49P (73) ø43.5
etc G40P (75) ø42.5
Ending G52P (85.5) ø52.5

44
 W.L. Combination
Dimensions
Dimensions F.R.L.
● C3010-W F.R.
F (Filtr)

when the knob

14 R (Reg)

Dimensions

is operated
7
Q 166 L (Lub)

7
45 (34.5) 126 Drain
Separ
63 Mech
3
Press SW
Res press
exh valve
Enlarged view of
Attachment bracket section SlowStart
104

A□W (Pipe adaptor set) Anti-bac/Bac-

remove Filt
Film
55

R
45

2.5

Resist FR
IN OUT
Oil-ProhR
Med
60

Port size Press FR

70

Rc1/4(8) No Cu/
PTFE FRL

123.5
Rc3/8(10)
148

Outdrs FRL
Attachment Adapter
(pressure gauge) Joiner
Pressure gauge attached optional dimensions table Press
Bore size ø5.7 to ø6 Pressure gauge Q R Gauge
90

Soft nylon tube G45P (70) ø39 CompFRL

Bore size ø5
60

G49P (69.5) ø43.5

Soft vinyl tube Maintenance dimensions LgFRL
Drain outlet G59P (72) ø52
Maintenance dimensions G40P (71.5) ø42.5
PrecsR
G52P (82) ø52.5 VacF/R
● Refer to page 96 for the dimensions of the metal bowl option filter/regulator Clean FR
and page 158 for the lubricator.
ElecPneuR
AirBoost
● C4010-W
Speed Ctrl
Silncr
CheckV/
when the knob

other
Dimensions

is operated

200 14 Fit/Tube
Q 7
Rc3/4:210
Nozzle
7

55 (42.5) 160
80 Air Unit
3

PrecsCompn
Electro
Enlarged view of Press SW
Attachment bracket section ContactSW
110

A□W (Pipe adaptor set)

AirSens
55

R
45

2.5

PresSW
IN OUT Cool
Air Flo
Sens/Ctrl
60

Port size
70

Rc1/4(8)
WaterRtSens
TotAirSys
149

Rc3/8(10)
171

Rc1/2(15) (Total Air)

Rc3/4(20) TotAirSys
Attachment (Gamma)
(pressure gauge) Gas
generator
Bore size ø5.7 to ø6 Pressure gauge attached optional dimensions table RefrDry
115

Soft nylon tube

Bore size ø5 Pressure gauge Q R DesicDry
60

Soft vinyl tube Maintenance dimensions G45P (75) ø39

Drain outlet HiPolymDry
G49P (74.5) ø43.5
Maintenance dimensions
G59P (77) ø52 MainFiltr
G40P (76.5) ø42.5 Dischrg
etc
G52P (86) ø52.5
* ‌Refer to page 96 for the dimensions of the metal bowl option filter/regulator
and page 158 for the lubricator. Ending
45
 W.L. Combination
F.R.L. Dimensions
F.R. ● C8010-W

the knob is operated

F (Filtr)

Dimensions when
270
R (Reg) Rc1 1/4:276

L (Lub) Q 200
Drain 20
65 52.5 100
Separ
Mech 4 14
8
Press SW

15
Res press
exh valve

9
SlowStart Attachment
159

Anti-bac/Bac- A□W (Pipe adaptor set)

remove Filt
Film
65

R
50

Resist FR Enlarged view of

bracket section
Oil-ProhR
Port size
70

Med
85

Press FR IN OUT Rc3/4(20)

No Cu/ Rc1(25)
PTFE FRL
Outdrs FRL
228
250

Adapter
Joiner
Press
Gauge Attachment Pressure gauge attached optional dimensions table
CompFRL Bore size ø5.7 to ø6 (pressure gauge) Pressure gauge Q R
Soft nylon tube
115

Bore size ø5 G45P (85) ø39

LgFRL
60

Soft vinyl tube G49P (84.5) ø43.5

Maintenance dimensions
PrecsR Drain outlet G59P (87) ø52
Maintenance dimensions
VacF/R G40P (86.5) ø42.5

Clean FR ● Refer to page 96 for the dimensions of the metal bowl option filter/regulator G52P (98) ø52.5
and page 158 for the lubricator.
ElecPneuR
AirBoost
Speed Ctrl
Silncr
CheckV/
other
Fit/Tube
Nozzle
Air Unit
PrecsCompn
Electro
Press SW
ContactSW
AirSens
PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
46
 W.L. Combination
Option assembly dimensions
Option assembly dimensions F.R.L.
● C1010-W to C8010-W F.R.
F (Filtr)
R (Reg)
L (Lub)
Model No. A B
Drain
C1010-W 35 45 Separ

A
C2010-W Mech
Press SW
C3010-W 45 60 Res press
C4010-W exh valve

B
C8010-W 50 70 SlowStart
Anti-bac/Bac-
remove Filt
Film
Resist FR
Oil-ProhR
Med
Press FR
No Cu/
PTFE FRL
L1 L2
Outdrs FRL
Adapter
Joiner
L3 Press
Gauge
CompFRL
Assembled option S P V K SV SK PV PK LgFRL
Model No. L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3
C1010-W 40 28 108 - - - 40 40 120 - - - 40 68 148 - - - - - - - - -
PrecsR
C2010-W 50 31.5 144.5 50 80 193 50 63 176 50 63 176 50 94.5 207.5 50 94.5 207.5 50 143 256 50 143 256 VacF/R
C3010-W 63 31.5 157.5 63 80 206 63 63 189 63 63 189 63 94.5 220.5 63 94.5 220.5 63 143 269 63 143 269 Clean FR
C4010-W 80 31.5 191.5 80 80 240 80 80 223 80 80 223 80 111.5 271.5 80 111.5 271.5 80 160 303 80 160 303
ElecPneuR
C4010-20-W *1 100 31.5 231.5 100 80 280 100 80 263 100 80 263 100 111.5 294.5 100 111.5 294.5 100 160 343 100 160 343
C8010-W 100 50 250 - - - - - - 100 100 290 - - - 100 150 340 - - - - - - AirBoost
L1: D ‌ imensions from the IN edge to center of the T type bracket * Refer to page 346 for details on bracket mounting hole dimensions. Speed Ctrl
mounting hole *1: ‌The pipe adaptor is assembled on the OUT side.
L2: ‌Spacing dimensions of the mounting hole from the first T As well, the pipe adaptor A400-20-W is assembled on both ends of C4010-20-W. Silncr
type bracket to the second T type bracket CheckV/
L3: Dimensions from the IN edge to the OUT edge other
Fit/Tube
Nozzle
Air Unit
PrecsCompn
Electro
Press SW
ContactSW
AirSens
PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
47
 F.R. combination Standard White Series
C1020/C2020/C2520-W
F.R.L.
C3020/C4020/C6020/C8020-W Series
Integrated filter and regulator
F.R.
Port size: 1/8 to 1
F (Filtr)
JIS symbol
R (Reg)
L (Lub)
Drain
Separ
Mech
Specifications 1 MPa ≈ 145.0 psi, 1 MPa = 10 bar
Press SW Item C1020-W C2020-W C2520-W C3020-W C4020-W C6020-W C8020-W
Res press
exh valve
SlowStart
Anti-bac/Bac-
remove Filt
Film
Resist FR
Oil-ProhR Appearance
Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Adapter
Joiner Filter F1000-W F2000-W F3000-W F3000-W F4000-W F6000-W F8000-W
Press Components
Gauge Regulator R1000-W R2000-W R2000-W R3000-W R4000-W R6000-W R8000-W
CompFRL Working fluid Compressed air
LgFRL Max. working pressure MPa 1.0 (≈150 psi, 10 bar) *2
Proof pressure MPa 1.5 (≈220 psi, 15 bar)
PrecsR
Ambient / fluid temperatures °C 5 (41°F) to 60 (140°F) *1
VacF/R Filtration rating μm 5
Clean FR Set pressure MPa 0.05 to 0.85 *2 0.05 (≈7.3 psi, 0.5 bar) to 0.85 (≈120 psi, 8.5 bar)
ElecPneuR Pressure relief With relief mechanism
Drain capacity cm3 12 25 45 45 80 80 80 (*3)
AirBoost
1/8,1/4 1/4,3/8 1/4,3/8 1/4,3/8 1/4,3/8,1/2 3/4,1 3/4,1
Speed Ctrl Port size Rc,NPT,G
(3/8 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (3/4 uses an adaptor) (1 1/4 uses an adaptor) (1 1/4 uses an adaptor)
Silncr Weight kg 0.28 0.64 0.65 0.79 1.25 2.07 2.93
CheckV/ Standard accessories Pressure gauge, bracket, bowl guard
other
*1: ‌The ambient / fluid temperatures for “RN” or “RP” (pressure switch with display PPR is mounted) and “R2” (digital pressure sensor PPX is attached) is 5 to 50°C.
Fit/Tube *2: When using C1020 Series “F1” with auto-drain, the min. working pressure is 0.2 MPa and max. working pressure is 0.7 MPa.
‌Refer to the max. working flow rate table (page 106) for F1000-F1 auto-drain for the max. working flow rate. Set the working flow rate to
Nozzle less than or equal to the max. working flow rate.
*3: Up to 170 cm3 is stored with the manual drain cock only.
Air Unit *4: In the case of “F” or “FF” with auto-drain, the min. working pressure of auto-drain is 0.1 MPa. Air is purged with initial drainage until pressure reaches 0.1 MPa.
*5: In the case of “F1” or “FF1” with auto-drain, the min. working pressure of auto-drain is 0.15 MPa.
PrecsCompn *6: W
‌ hen element option “Y” is selected, refer to page 108 for max. flow rate. Set the working flow rate to less than or equal to the max. working flow rate.
Electro *7: C2020-W Series with “F1” (with auto-drain) must be used at equal to or less than the max. working flow rate. (Refer to the F2000-W section on page 106 for max. flow rate.)
Press SW
ContactSW Option weight
* Add to the weight of the standard accessories. Unit: kg
AirSens Drain discharge Bowl material Pressure gauge Pipe adaptor set
PresSW Code
Cool F F1 FF FF1 M M1 T* RN/RP A6*W A8*W A10*W A15*W A20*W A25*W A32*W
Air Flo C1020 0.007 0 0.04 0.09 0.09 0.09
Sens/Ctrl C2020 0.02 0.1 0 0.04 0.16 0.16 0.16
WaterRtSens C2520 0.02 0.1 0.1 0 0.04 0.16 0.16 0.16
TotAirSys C3020 0.02 0.02 0.1 0.1 0 0.04 0.16 0.16 0.16
(Total Air) C4020 0.02 0.02 0.1 0.1 0 0.04 0.16 0.16 0.16 0.16
TotAirSys
(Gamma) C6020 0.02 0.02 0.1 0.1 0 0.04 0.53 0.53 0.53
Gas C8020 0.02 0.02 0.02 0.02 0.1 0.1 0 0.04 0.53 0.53 0.53
generator
RefrDry Code Assembled components Pressure gauge
D S P V K G45P G49P G59P G40P G52P R2
DesicDry C1020 0.056 0.15 0.18 0.074 0.086 0.115 0.085 0.15 0.04
HiPolymDry C2020 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.085 0.15 0.04
C2520 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
MainFiltr C3020 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
Dischrg C4020 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
etc
C6020 0.45 0.51 0.9 0.074 0.086 0.115 0.085 0.15 0.04
Ending C8020 0.45 0.51 0.9 0.074 0.086 0.115 0.085 0.15 0.04

48
 F.R. Combination
How to order
H o w t o o rde r A Model No.
F.R.L.
C1020 6 W L A6W * For the explanation of the
U DSV option,Page 30.
F.R.
G Pipe adaptor set

C1020

C2020

C2520

C3020

C4020

C6020

C8020
(included) H Pressure gauge option (attachment) F (Filtr)
Code Description
A Model No.
R (Reg)
B Port size
B Port size 6 1/8 L (Lub)
8 1/4
Drain
10 3/8
Separ
15 1/2 Mech
20 3/4 Press SW
25 1 Res press
exh valve
C Port thread *2
C Port thread Blank Rc thread SlowStart
N NPT thread Anti-bac/Bac-
G G thread remove Filt
Film
D Option *3
Resist FR
D Option Blank Filter with manual drain cock
F Filter/auto-drain with manual override (NO: Exhaust when not pressurized) Oil-ProhR
Drain
F1 Filter/auto-drain with manual override (NC: No exhaust when not pressurized) Med
discharge
FF Filter/large auto-drain with manual override (NO: Exhaust when not pressurized) Press FR
E Assembled *4 No Cu/
FF1 Filter/large auto-drain with manual override (NC: No exhaust when not pressurized)
components Blank Polycarbonate bowl PTFE FRL
Bowl Z Nylon bowl Outdrs FRL
F Unit indicated material M Metal bowl Adapter
*11 M1 Metal bowl with manual drain cock Joiner
Blank 5 μm Press
Element
Y 0.3 μm (submicron) *5 Gauge
Precautions for model No. selection Diff press Blank Without differential pressure detection port
CompFRL
detect Q With differential pressure detection port (Rc1/4)
*1: Pipe adaptor A400-20*-W is assembled on both ends of
C4020-20*-W. A20*W does not need to be selected for the pipe
Pressure Blank 0.05 to 0.85 MPa LgFRL
range L 0.05 to 0.35 MPa *6
adaptor set. PrecsR
Pressure Blank With relief mechanism
*2: G threads and NPT threads are available for IN, OUT, gauge
relief N Non-relief
port and drain outlet (metal bowl with auto-drain). Attachments P
Blank With standard pressure gauge (G401-W)
VacF/R
and V are also included.
T No pressure gauge (gauge port (1/4) is assembled sealed)
*3: Select options for the drainage, bowl material, element, Clean FR
Pressure T8 Pressure gauge ready (gauge port (1/4) is left open)
differential pressure detection and regulator. When selecting
options for several items, list options in order from the top.
gauge T6 Digital pressure sensor PPX attachment option*7 ElecPneuR
RN Pressure switch with display, PPR assembled (NPN output 1 point)
*4: R efer to page 354 for the auto-drain usage conditions. AirBoost
RP Pressure switch with display, PPR assembled (PNP output 1 point)
*5: Refer to page 108 for max. processing flow rate when Flow Blank Standard flow (left → right)
option “Y” is selected. Speed Ctrl
direction X1 IN/OUT reverse flow (right to left)
*6: T he pressure gauge’s indication range is 0 to 0.4 MPa for the
option “L”. E Assembled components Pages 166 to 171, 182 to 187, 348 and 349 Silncr
*7: When option “T6” is selected, only “Blank” or “R2” can be Blank Without assembled component type CheckV/
selected for H● Pressure gauge (included). The digital pressure U Assembled component type *8 other
sensor PPX mounting port (Rc1/8) is left open. D Distributor (D101-W, D401-W, D801-W)
Assembled component

*8: Installation position for assembled components S Pressure switch (P1100-W, 4100-W, 8100-W)
Fit/Tube
P Pressure switch (P4000-W) Nozzle
Code Installation position for attachments Compatibility
V Residual pressure exhaust valve (V1000-W, 3000-W)
D F+(D)+R C1020-W to C8020-W
S C1020-W to C8020-W
V1*12 Residual pressure exhaust valve (V1000-W, 3000-W) Air Unit
Pressure switch (P1100-W, P4100-W),
or F+R+(S,P) (“P” excludes 1000, SV1*12
Residual pressure exhaust valve (V1000-W, 3000-W) PrecsCompn
P 6000 and 8000 Series)
K Residual pressure exhaust valve with locking hole (V3010-W, V6010-W) Electro
V C1020-W to C8020-W (“V” Press SW
or F+R+(V, K) excludes 6000 and 8000 Series F Unit indicated
K and “K” excludes 1000 Series) Blank MPa display (Rc thread), psi display (NPT thread)), bar display (G thread) ContactSW
J1 MPa display (NPT, G threads)
C1020-W to C4020-W AirSens
V1 (V1)+F+R
(“R” is reverse regulator) G Pipe adaptor set (attachments) Page 350 *9
PresSW
C1020-W to C4020-W Blank Not included
SV1 (V1)+F+R+(S) Cool
(“R” is reverse regulator) A6*W 1/8 pipe adaptor set Air Flo
Note) Indicate “U”+”D”, “S”,”P”,”V”, “V1”, “SV1” and “K” when A8*W 1/4 pipe adaptor set Sens/Ctrl
selecting an assembled component. A10*W 3/8 pipe adaptor set
WaterRtSens
Use customized combination specifications sheet for any other A15*W 1/2 pipe adaptor set
A20*W 3/4 pipe adaptor set
TotAirSys
combination.
(Total Air)
*9: T  he joiner set is enclosed with the pipe adaptor set. A25*W 1 pipe adaptor set
TotAirSys
*10: The pressure gauge option (included) can be selected only when A32*W 1 1/4 pipe adaptor set (Gamma)
C Port thread is Rc thread. * Adaptor thread Gas
*11: Display unit options when selecting NPT threads: If Blank is selected, Blank Rc thread generator
the pressure unit is psi and the temperature display unit is °F. N NPT thread RefrDry
When G thread and Blank display unit option are selected, the pressure G G thread
unit will be bar and the temperature display unit will be °C.
H Pressure gauge option (attachment) Page 363 *10
DesicDry
When NPT/G thread and “J1” display unit option are selected, the
Blank Not included
pressure unit will be MPa and the temperature display unit will be °C. HiPolymDry
G45P G45D-8-P10 (L: G45D-8-P04)
*12: Assembled components (V1, SV1) can be selected only with
port size and drain discharge options. When selecting other G49P G49D-8-P10(L:G49D-8-P04) MainFiltr
G59P G59D-8-P10(L:G59D-8-P04) Dischrg
options, they are handled as customized combinations.
G40P G40D-8-P10(L:G40D-8-P04) etc
G52P G52D-8-P10(L:G52D-8-P10)
R2 *9 Digital pressure sensor: PPX-R10N-6M Ending
49
 F.R. Combination
F.R.L. Dimensions
F.R. C1020-W
F (Filtr)
11 7.5
R (Reg) 7.5
L (Lub)

10 5.5
Drain O 123
Separ
Mech 49 80
Press SW
40 36 40
Res press
Attachment
exh valve
A W (Pipe adaptor set) Enlarged view of
SlowStart bracket section
P
45

Anti-bac/Bac-
35

· Optional dimensions
24.5

remove Filt
Film IN OUT With auto-drain (F1)
Resist FR
Oil-ProhR Port size Tube center
45
55

Med Rc1/8(6)
Press FR Rc1/4(8)
No Cu/
98

PTFE FRL

92
Outdrs FRL
Adapter Attachment
Joiner (pressure gauge)
Press Bore size ø4
Gauge Soft nylon tube With PPR
40

Drain outlet option

CompFRL M5
Maintenance dimensions Drain outlet
LgFRL Pressure gauge attached optional dimensions table
PrecsR Pressure gauge O P
G45P (74) ø39
VacF/R
G49P (73.5) ø43.5
Clean FR G59P (76) ø52
ElecPneuR G40P (75.5) ø42.5
G50P (75.5) ø52.5
AirBoost
G41P (74) ø42
Speed Ctrl G52P (86) ø52.5
Silncr R2 (74) 30
CheckV/ C2020-W
other
Fit/Tube P 140
Nozzle
45 35.5 100
Air Unit
7 50
PrecsCompn Attachment
Electro (Pipe adaptor set)
Press SW
ContactSW
Q
55

1.5
45

AirSens
PresSW IN OUT
Cool Port size
Air Flo
Sens/Ctrl Rc1/4(8)
Rc3/8(10)
60
70

WaterRtSens
TotAirSys
(Total Air)
Attachment
147

TotAirSys
(Gamma) (pressure gauge)
Gas
generator
RefrDry
Pressure gauge attached optional dimensions table
DesicDry Pressure gauge P Q
HiPolymDry Bore size ø5.7 to ø6 G45P (73.5) ø39
Maintenance

Soft nylon tube G49P (73) ø43.5

dimensions

MainFiltr Bore size ø5

G40P (75) ø42.5
60

Dischrg Soft vinyl tube

etc Drain outlet G52P (85.5) ø52.5
R2 (73) 30
Ending
50
 F.R. Combination
Dimensions
Dimensions F.R.L.
C2520-W F.R.
14 7
O F (Filtr)

7
49 153
113
R (Reg)
45 35.5
Attachment
7 63 L (Lub)
A W (Pipe adaptor set)
Dimensions of Drain
bracket section Separ
Mech
Press SW
Res press
55
45

31.5
exh valve
P IN OUT SlowStart
Anti-bac/Bac-
remove Filt
60

Film

88.5
70

Resist FR
Port size Oil-ProhR
Rc1/4(8)
148

Med
Rc3/8(10) Press FR
No Cu/
Attachment PTFE FRL
(pressure gauge)
With PPR Bore size ø5.7 to ø6 Outdrs FRL
option Soft nylon tube
Bore size ø5
Pressure gauge attached optional dimensions table Adapter
Joiner
Maintenance

Soft vinyl tube

dimensions

Pressure gauge O P Press

Drain outlet G45P (73.5) ø39 Gauge
60

G49P (73) ø43.5 CompFRL

G59P (75.5) ø52 LgFRL
G40P (75) ø42.5
PrecsR
G52P (85.5) ø52.5
R2 (73) 30 VacF/R
Clean FR
ElecPneuR
AirBoost
C3020-W Speed Ctrl
Silncr
CheckV/
other
14 Fit/Tube
166 7

45 O 126 Nozzle
7

57 63 Air Unit
(34.5) Attachment
A W (Pipe adaptor set)
PrecsCompn
Electro
55

P
45

Enlarged view of Press SW

32.5
2.5

IN OUT bracket section ContactSW

Port size AirSens
60

Rc1/4(8) PresSW
70

Rc3/8(10) Cool
Attachment Air Flo
(pressure gauge) Sens/Ctrl
WaterRtSens
148

With PPR
option TotAirSys
(Total Air)
Bore size ø5.7 to ø6 TotAirSys
(Gamma)
Soft nylon tube
Gas
Bore size ø5
Pressure gauge attached optional dimensions table generator
Soft vinyl tube
60

Drain outlet Pressure gauge O P RefrDry

Maintenance dimensions G45P (70) ø39
DesicDry
G49P (69.5) ø43.5
G59P (72) ø52
HiPolymDry
G40P (71.5) ø42.5 MainFiltr
Refer to page 113 for the optional dimensions of the metal bowl.
G52P (82) ø52.5 Dischrg
etc
R2 (69.5) 30
Ending
51
 F.R. Combination
F.R.L. Dimensions
F.R. C4020-W
F (Filtr)
200
R (Reg) Rc3/4:210
14
L (Lub) 55 O 160 7

Drain 62 80

7
Separ (42.5)
Mech Attachment
Press SW A W (Pipe adaptor set)
Res press
P
55

45

exh valve
2.5
35
SlowStart IN OUT Enlarged view of
Anti-bac/Bac- bracket section
Port size
remove Filt
Rc1/4(8)
60

Film
70

Resist FR Attachment Rc3/8(10)

(pressure gauge) Rc1/2(15)
Oil-ProhR Rc3/4(20)
Med
171

Press FR With PPR

No Cu/ option
PTFE FRL
Bore size ø5.7 to ø6
Outdrs FRL Soft nylon tube
Adapter Bore size ø5 Pressure gauge attached optional dimensions table
Joiner Soft vinyl tube
Press Pressure gauge O P
60

Drain outlet
Gauge Maintenance dimensions G45P (75) ø39
CompFRL G49P (74.5) ø43.5
LgFRL G59P (77) ø52
Refer to page 113 for the optional dimensions of the metal bowl. G40P (76.5) ø42.5
PrecsR
G52P (86) ø52.5
VacF/R R2 (75) 30
Clean FR
ElecPneuR
AirBoost
C6020-W
Speed Ctrl
Silncr
CheckV/
other 250
Rc1 1/4:256
Fit/Tube
180
Nozzle 90
65 O
Air Unit 67 Attachment
45 A W (Pipe adaptor set) 20
PrecsCompn 14 8
65
50

Electro
40

Press SW .4 .6 OUT
P

.2 .8

IN
1.0

ContactSW
MPa

Port size
70

15

AirSens
9
85

Attachment Rc3/4(20)
PresSW
(pressure gauge) Dimensions of
Cool Rc1(25)
With PPR
bracket section
Air Flo
210

Sens/Ctrl option
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma) Bore size ø5.7 to ø6
Gas Soft nylon tube
generator Pressure gauge attached optional dimensions table
Bore size ø5
RefrDry Soft vinyl tube Pressure gauge O P
60

Maintenance dimensions Drain outlet G45P (80) ø39

DesicDry G49P (79.5) ø43.5
HiPolymDry G59P (82) ø52
G40P (81.5) ø42.5
MainFiltr
Dischrg G52P (93) ø52.5
etc R2 (80) 30

Ending
52
 F.R. Combination
Option assembly dimensions
Dimensions F.R.L.
C8020-W 270 F.R.
O Rc1 1/4:276 20
200
F (Filtr)
72 14
8
65 50 100 R (Reg)

15
Attachment
A W (Pipe adaptor set) L (Lub)

9
Drain
65

50

P
Separ

40
Mech
Press SW
Enlarged view of Res press
Port size bracket section exh valve
70

IN
85

OUT
Rc3/4(20) SlowStart
Attachment
Rc 1 (25)
(pressure gauge) Anti-bac/Bac-
remove Filt
Film
Resist FR
250

Pressure gauge attached optional dimensions table

Oil-ProhR
Pressure gauge O P Med
G45P (85) ø39 Press FR
With PPR No Cu/
option G49P (84.5) ø43.5
PTFE FRL
Bore size ø5.7 to ø6 G59P (87) ø52
Soft nylon tube Outdrs FRL
Bore size ø5 G40P (86.5) ø42.5
Adapter
Soft vinyl tube G52P (98) ø52.5 Joiner
60

Drain outlet Press

R2 (85) 30
Gauge
Maintenance dimensions CompFRL
Refer to page 113 for the optional dimensions of the metal bowl.
LgFRL
Option assembly dimensions PrecsR
C1020-W to C8020-W Model No. A B VacF/R
C1020-W 35 45
Clean FR
C2020-W
ElecPneuR
A

OUT
IN C2520-W
45 60
C3020-W AirBoost
2-piping bore size
C4020-W
B

Speed Ctrl
C6020-W
50 70 Silncr
C8020-W
CheckV/
other
Fit/Tube
Nozzle
L1 L2
L3
Air Unit
PrecsCompn
Assembled option D S (*1) P V V1 K DS (*1) DP DV DK Electro
Model No. L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 Press SW
C1020-W 40 28 108 40 40 129.5 − − − 40 40 120 40 40 120 − − − 40 68 157.5 − − − 40 68 148 − − − ContactSW
C2020-W 50 31.5 131.5 50 50 151.5 50 50 180 50 50 163 63 50 163 50 50 163 50 81.5 183 50 81.5 211.5 50 81.5 194.5 50 81.5 194.5
AirSens
C2520-W 63 31.5 144.5 63 50 164.5 63 50 193 63 50 176 − − − 63 50 176 63 81.5 196 63 81.5 224.5 63 81.5 207.5 63 81.5 207.5
PresSW
C3020-W 63 31.5 157.5 63 63 177.5 63 63 206 63 63 189 63 63 189 63 63 189 63 94.5 209 63 94.5 237.5 63 94.5 220.5 63 94.5 220.5 Cool
C4020-W 80 31.5 191.5 80 80 211.5 80 80 240 80 80 223 63 80 223 80 80 223 80 111.5 243 80 111.5 271.5 80 111.5 254.5 80 111.5 254.5 Air Flo
C4020-20-W *1 100 31.5 231.5 100 80 231.5 100 80 280 100 80 263 − − − 100 80 263 100 111.5 263 100 111.5 311.5 100 111.5 294.5 100 111.5 294.5
Sens/Ctrl
C6020-W 90 50 230 90 90 265 − − − − − − − − − 90 90 270 90 140 315 − − − − − − 90 140 320 WaterRtSens
C8020-W 100 50 250 100 100 285 − − − − − − − − − 100 100 290 100 150 335 − − − − − − 100 150 340 TotAirSys
(Total Air)
Assembled option DSV DSK DPV DPK SV SV1 SK PV PK
TotAirSys
Model No. L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 (Gamma)
C1020-W 40 96 176 − − − − − − − − − 40 68 148 40 80 170 − − − − − − − − − Gas
generator
C2020-W 50 113 226 50 113 226 50 162 274.5 50 162 274.5 50 81.5 194.5 63 100 215 50 81.5 194.5 50 130 243 50 130 243
C2520-W 63 113 239 63 113 239 63 162 287.5 63 162 287.5 63 81.5 207.5 − − − 63 81.5 207.5 63 130 256 63 130 256 RefrDry
C3020-W 63 126 252 63 126 252 63 175 300.5 63 175 300.5 63 94.5 220.5 63 126 241 63 94.5 220.5 63 143 269 63 143 269 DesicDry
C4020-W 80 143 286 80 143 286 80 191.5 334.5 80 191.5 334.5 80 111.5 254.5 63 160 275 80 111.5 254.5 80 160 303 80 160 303
C4020-20-W *1 100 143 326 100 143 326 100 191.5 374.5 100 191.5 374.5 100 111.5 294.5 − − − 100 111.5 294.5 100 160 343 100 160 343 HiPolymDry
C6020-W − − − 90 190 370 − − − − − − − − − − − − 90 140 320 − − − − − − MainFiltr
C8020-W − − − 100 200 390 − − − − − − − − − − − − 100 150 340 − − − − − − Dischrg
L1: Dimensions from the IN edge to center of the T-bracket mounting hole * Refer to page 346 for details on bracket mounting hole dimensions. etc
L2: ‌Spacing dimensions of the mounting hole from the first T-bracket to *1: ‌The pipe adaptor is assembled on the OUT side.
the second T-bracket As well, the pipe adaptor A400-20-W is assembled on both ends of C4020-20-W.
Ending
L3: Dimensions from the IN edge to the OUT edge
53
 F.M.R. combination Standard White Series
C1030/C2030/C2530-W
F.R.L.
C3030/C4030/C6030/C8030-W Series
Integrated filter, oil mist filter and regulator
F.R.
Port size: 1/8 to 1
F (Filtr)
JIS symbol
R (Reg)
L (Lub)
Drain
Separ
Mech
Specifications 1 MPa ≈ 145.0 psi, 1 MPa = 10 bar
Press SW Item C1030-W C2030-W C2530-W C3030-W C4030-W C6030-W C8030-W
Res press
exh valve
SlowStart
Anti-bac/Bac-
remove Filt
Film
Resist FR
Appearance
Oil-ProhR
Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Adapter Filter F1000-W F2000-W F3000-W F3000-W F4000-W F6000-W F8000-W
Joiner
Press Comps Oil mist filter M1000-W M2000-W M3000-W M3000-W M4000-W M6000-W M8000-W
Gauge Regulator R1000-W R2000-W R2000-W R3000-W R4000-W R6000-W R8000-W
CompFRL Working fluid Compressed air
LgFRL Max. working pressure MPa 1.0 (≈150 psi, 10 bar) *3
Proof pressure MPa 1.5 (≈220 psi, 15 bar)
PrecsR
Ambient / fluid temperatures °C 5 (41°F) to 60 (140°F) *2
VacF/R
Set pressure MPa 0.05 to 0.85 *3 0.05 (≈7.3 psi, 0.5 bar) to 0.85 (≈120 psi, 8.5 bar)
Clean FR Pressure relief With relief mechanism
ElecPneuR 1/8,1/4 1/4,3/8 1/4,3/8 1/4,3/8 1/4,3/8,1/2 3/4,1 3/4,1
Port size Rc,NPT,G
(3/8 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (3/4 uses an adaptor) (11/4 uses an adaptor) (11/4 uses an adaptor)
AirBoost
Weight kg 0.40 0.98 1.02 1.10 1.86 3.19 4.45
Speed Ctrl
Secondary oil concentration
0.01 mg/m3 or less (0.1 mg/m3 or less after oil saturation)
Silncr (Oil mist filter outlet side)
CheckV/ Max. flow rate (*1) m3/min 0.15 0.25 0.36 0.36 0.825 1.27 2.6
other
Fit/Tube *1: The max. flow is for a primary pressure of 0.7 MPa. Refer to page 108 for the max. flow rate of element option “Y”.
*2: The ambient / fluid temperatures for “RN” or “RP” (pressure switch with display PPR is mounted) and “R2” (digital pressure sensor PPX is attached) is 5 to
50°C.
Nozzle *3: When using C1030-W Series “F1” with auto-drain, the NC auto-drain is included for both the filter and oil mist filter. Min. working pressure
Air Unit is 0.2 MPa and max. working pressure is 0.7 MPa. Refer to the max. working processing flow rate table (page 119) for M1000-W-F1
auto-drain for the max. working flow rate.
PrecsCompn *4: Refer to page 116 for details on other oil mist filters.
*5: In the case of “F” with auto-drain, the supply air pressure is 0.15 MPa or more. For the air filter auto-drain, air is purged with the initial drainage until pressure
Electro reaches 0.1 MPa.
Press SW *6: When “F1” with an auto-drain is selected, the filter, oil mist filter, and NC auto-drain are assembled, but the supply air pressure must be 0.15 MPa and over.
ContactSW
Option weight
AirSens * Add to the weight of the standard accessories. Unit: kg
PresSW Drain discharge Bowl material Pressure gauge Pipe adaptor set
Cool Code
Air Flo F F1 FF FF1 M M1 T* RN/RP A6*W A8*W A10*W A15*W A20*W A25*W A32*W
Sens/Ctrl C1030 0.014 0 0.04 0.09 0.09 0.09
C2030 0.04 0.2 0 0.04 0.16 0.16 0.16
WaterRtSens
C2530 0.04 0.2 0.2 0 0.04 0.16 0.16 0.16
TotAirSys
(Total Air) C3030 0.04 0.04 0.2 0.2 0 0.04 0.16 0.16 0.16
TotAirSys C4030 0.04 0.04 0.2 0.2 0 0.04 0.16 0.16 0.16 0.16
(Gamma) C6030 0.04 0.04 0.2 0.2 0 0.04 0.53 0.53 0.53
Gas
generator C8030 0.04 0.04 0.04 0.04 0.2 0.2 0 0.04 0.53 0.53 0.53

RefrDry Assembled components Pressure gauge

Code
D S P V K G45P G49P G59P G40P G52P R2
DesicDry
C1030 0.056 0.15 0.18 0.074 0.086 0.115 0.085 0.15 0.04
HiPolymDry C2030 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.085 0.15 0.04
C2530 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
MainFiltr
C3030 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
Dischrg
C4030 0.17 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
etc
C6030 0.45 0.51 0.9 0.074 0.086 0.115 0.085 0.15 0.04
Ending C8030 0.45 0.51 0.9 0.074 0.086 0.115 0.085 0.15 0.04

54
 F.M.R. Combination
How to order
How to order A Model No.
F.R.L.
C1030 6 W L U DSV A6W * Refer to page 30 for the
explanation of the option.
F.R.
G Pipe adaptor set
H Pressure gauge option (included) F (Filtr)

C1030

C2030

C2530

C3030

C4030

C6030

C8030
(included)
Code Description
A Model No. R (Reg)
B Port size
B Port size 1/8
6 L (Lub)
8 1/4
Drain
10 3/8 Separ
15 1/2 Mech
20 3/4 *1 Press SW
25 1 Res press
exh valve
C Port thread *2
C Port thread Blank Rc thread
SlowStart
N NPT thread Anti-bac/Bac-
G G thread
remove Filt
Film
D Option *3 Resist FR
D Option Blank With manual drain cock
Oil-ProhR
F Auto-drain with manual override (NO: Exhaust when not pressurized)
Drain Med
F1 Auto-drain with manual override (NC: No exhaust when not pressurized)
E Assembled components discharge Press FR
FF Large auto-drain with manual override (NO: Exhaust when not pressurized) No Cu/
*4, *5
FF1 Large auto-drain with manual override (NC: No exhaust when not pressurized) PTFE FRL
Blank Polycarbonate bowl
F Display unit Outdrs FRL
Bowl Z Nylon bowl
*12 material M Metal bowl
Adapter
Joiner
M1 Metal bowl with manual drain cock
Press
Blank 5 μm Gauge
Precautions for model No. selection
Element
Y 0.3 μm (submicron) *6
Diff press Blank Without differential pressure detection port
CompFRL
*1: Pipe adaptor A400-20*-W is assembled on both ends of With differential pressure detection port (Rc 1/4)
detect Q LgFRL
C4030-20*-W. A20*W does not need to be selected for the pipe Pressure Blank 0.05 to 0.85 MPa
adaptor set. range L 0.05 to 0.35 MPa *7 PrecsR
*2: G threads and NPT threads are available for IN, OUT, gauge Pressure Blank With relief mechanism
port and drain outlet (metal bowl with auto-drain). Attachments P
relief N Non-relief
VacF/R
and V are also included.
Blank With standard pressure gauge (G401-W) Clean FR
*3: Select options for the drainage, bowl material, element,
T No pressure gauge (gauge port (1/4) is assembled sealed)
differential pressure detection and regulator. When selecting
options for several items, list options in order from the top.
Pressure T8 Pressure gauge ready (gauge port (1/4) is left open) ElecPneuR
gauge T6 Digital pressure sensor PPX included option *8
*4: Refer to page 354 for the auto-drain usage conditions. AirBoost
RN Pressure switch with display PPR mounted (NPN output 1 point)
*5: When option code “F” is selected, the NO auto-drain is enclosed
for the air filter and the NC auto-drain is enclosed for the oil mist RP Pressure switch with display PPR mounted (PNP output 1 point) Speed Ctrl
filter. Flow Blank Standard flow (left right)
For “FF” and “FF1”, only the filter has a large discharge rate. The Direction X1 Reverse flow (right left) Silncr
oil mist filter is normal NC auto-drain. E Assembled components Pages 166 to 171, 182 to 187, 348 and 349 CheckV/
*6: Refer to page 108 for max. processing flow rate when Blank Without assembled component other
option “Y” is selected. U Assembled component *9 Fit/Tube
*7: The pressure gauge’s indication range is 0 to 0.4 MPa for the D Distributor (D101-W, D401-W, D801-W)
option “L”. Nozzle
component
Assembled

S Pressure switch (P1100-W, 4100-W, 8100-W)

*8: When option “T6” is selected, only “Blank” or “R2” can be
P Pressure switch (P4000-W)
selected for H● Pressure gauge (included). The digital pressure Air Unit
V Residual pressure exhaust valve (V1000-W, 3000-W)
sensor PPX mounting port (Rc1/8) is left open.
K Residual pressure exhaust valve with keyhole (V3010-W, V6010-W) PrecsCompn
*9: Installation position for assembled components
F Display unit Electro
Code Attachment Install positions Compatible model Press SW
Blank MPa display (Rc thread), psi display (NPT thread), bar display (G thread)
D F+M+(D)+R C1030-W to C8030-W
J1 MPa display (NPT, G thread) ContactSW
S C1030-W to C8030-W
or F+M+R+(S,P) (“P” excludes 1000, G Pipe adaptor set (included) Page 350 *10
AirSens
P 6000 and 8000 Series) Blank Not included
1/8 pipe adaptor set PresSW
V C1030-W to C4030-W (“V” A6*W
Cool
or F+M+R+(V,K) excludes 6000 and 8000 Series A8*W 1/4 pipe adaptor set
Air Flo
K and “K” excludes 1000 Series) A10*W 3/8 pipe adaptor set Sens/Ctrl
A15*W 1/2 pipe adaptor set
Note) Indicate “U”+“D”, “S”,“P”,“V” and “K” when selecting an WaterRtSens
assembled component. A20*W 3/4 pipe adaptor set
1 pipe adaptor set TotAirSys
Use customized combination specifications sheet for any other A25*W
A32*W 1 1/4 pipe adaptor set
(Total Air)
combination. TotAirSys
*10: The joiner set is enclosed with the pipe adaptor set. * Adaptor thread (Gamma)
*11: The pressure gauge option (included) can be selected only when Blank Rc thread Gas
C Port thread is Rc thread. N NPT thread generator
*12: Display unit options when selecting NPT threads: If Blank is G G thread
RefrDry
selected, the pressure unit is psi and the temperature display H Pressure gauge option (included) Page 363 *11
unit is °F. DesicDry
Blank Not included
When G thread and Blank display unit option are selected, the
G45P G45D-8-P10(L:G45D-8-P04)
pressure unit will be bar and the temperature display unit will be HiPolymDry
G49P G49D-8-P10(L:G49D-8-P04)
°C.
G59P G59D-8-P10(L:G59D-8-P04) MainFiltr
When NPT/G thread and “J1” display unit option are selected,
G40P G40D-8-P10(L:G40D-8-P04)
the pressure unit will be MPa and the temperature display unit Dischrg
will be °C. G52P G52D-8-P10(L:G52D-8-P10) etc
R2 *8 Digital pressure sensor: PPX-R10N-6M
Ending
55
 F.M.R. Combination
F.R.L. Dimensions
F.R. C1030-W
F (Filtr)
11 7.5
R (Reg)
7.5
O 163
L (Lub)

10 5.5
Drain 49 120
Separ
Mech 40 36 40 40
Press SW
Res press Attachment
exh valve
A W (Pipe adaptor set) Enlarged view of
P
45

SlowStart
35

bracket section
24.5

Anti-bac/Bac-
IN OUT
remove Filt · Optional dimensions
Film With auto-drain (F1)
Resist FR Port size
45

Oil-ProhR Rc1/8(8) Tube center

55

Attachment Rc1/4(8)
Med (pressure gauge)
Press FR
98

No Cu/
PTFE FRL

92
Outdrs FRL
Adapter With PPR
Joiner option
Press Bore size ø4
60

Gauge Soft nylon tube

CompFRL Drain outlet Maintenance dimensions M5
Drain outlet
LgFRL Pressure gauge attached optional dimensions table
PrecsR Pressure gauge O P
G45P (74) ø39
VacF/R
G49P (73.5) ø43.5
Clean FR G59P (76) ø52
ElecPneuR G40P (75.5) ø42.5
G52P (86) ø52.5
AirBoost
R2 (74) 30
Speed Ctrl
Silncr C2030-W
CheckV/
other
Fit/Tube P 190
Nozzle 150
Air Unit 45 35.5
100
PrecsCompn 7 50
Electro Attachment
Press SW (Pipe adaptor set)
ContactSW
Q
55

AirSens
1.5
45

PresSW
IN OUT
Cool
Air Flo Port size
Sens/Ctrl Rc1/4(8)
60

WaterRtSens Rc3/8(10)
70

TotAirSys
(Total Air)
TotAirSys Attachment
147

(Gamma) (pressure gauge)

Gas
generator
RefrDry
Pressure gauge attached optional dimensions table
DesicDry
Pressure gauge P Q
HiPolymDry G45P (73.5) ø39
Maintenance

Bore size ø5.7 to ø6

dimensions

MainFiltr Soft nylon tube G49P (73) ø43.5

60

Bore size ø5
Dischrg G40P (75) ø42.5
etc Soft vinyl tube
Drain outlet G52P (85.5) ø52.5
Ending R2 (73) 30

56
 F.M.R. Combination
Dimensions
Dimensions F.R.L.
C2530-W F.R.
14 7
F (Filtr)
O
49 R (Reg)

7
216
45 35.5 176 L (Lub)
Attachment
7
63 63 A W (Pipe adaptor set) Drain
Dimensions of Separ
Mech
bracket section Press SW
Res press
exh valve
55
45

31.5
IN OUT SlowStart
Anti-bac/Bac-
P

remove Filt
Film
60

Port size Resist FR

70

88.5
Attachment Rc1/4(8) Oil-ProhR
(pressure gauge) Rc3/8(10) Med
148

With PPR Press FR

option No Cu/
PTFE FRL
Outdrs FRL
Bore size ø5.7 to ø6 Adapter
Soft nylon tube Pressure gauge attached optional dimensions table Joiner
Bore size ø5 Press
Pressure gauge O P
Soft vinyl tube
Maintenance

Gauge
dimensions

Drain outlet G45P (73.5) ø39

CompFRL
60

G49P (73) ø43.5

G59P (75.5) ø52 LgFRL
G40P (75) ø42.5 PrecsR
G52P (85.5) ø52.5
VacF/R
R2 (73) 30
Clean FR
ElecPneuR
AirBoost
C3030-W Speed Ctrl
Silncr
CheckV/
other

229 14 Fit/Tube
O 7
57 189 Nozzle
7

45 (34.5) 63 63
Air Unit
Attachment
A W (Pipe adaptor set) PrecsCompn
Electro
55

P
45

2.5

Press SW
32.5

IN OUT Enlarged view of ContactSW

bracket section
AirSens
Port size
60
70

Attachment PresSW
(pressure gauge) PRESS PRESS Rc1/4(8) Cool
Rc3/8(10)
TURN TURN

Air Flo
148

Sens/Ctrl
With PPR
option WaterRtSens
TotAirSys
Bore size ø5.7 to ø6 (Total Air)
TotAirSys
Soft nylon tube
(Gamma)
Bore size ø5
Gas
Soft vinyl tube
Pressure gauge attached optional dimensions table generator
Drain outlet
60

Pressure gauge O P RefrDry

Maintenance dimensions G45P (70) ø39 DesicDry
G49P (69.5) ø43.5
HiPolymDry
G59P (72) ø52
G40P (71.5) ø42.5 MainFiltr
Refer to page 113 for the dimensions of the metal bowl option filter and G52P (82) ø52.5 Dischrg
page 124 for the oil mist filter. R2 (69.5) 30
etc

Ending
57
 F.M.R. Combination
F.R.L. Dimensions
F.R. C4030-W
F (Filtr)
Enlarged view of
R (Reg) 280
Rc3/4:290
bracket section
O
L (Lub) 62 240 14
Drain 7
55 (42.5) 80 80
Separ
Attachment

7
Mech
Press SW A W (Pipe adaptor set)
Res press
55

P
45

exh valve
2.5
35

SlowStart IN OUT
Anti-bac/Bac-
remove Filt Port size
60

Attachment
70

Film
Resist FR (pressure gauge) PRESS PRESS
Rc1/4(8)
Rc3/8(10)
TURN TURN

Oil-ProhR Rc1/2(15)
171

Med With PPR

Press FR option
No Cu/
PTFE FRL
Bore size ø5.7 to ø6
Outdrs FRL Soft nylon tube
Adapter Bore size ø5
Joiner Soft vinyl tube
60

Press Drain outlet

Gauge
CompFRL Maintenance dimensions Pressure gauge attached optional dimensions table
Pressure gauge O P
LgFRL
G45P (75) ø29
PrecsR G49P (74.5) ø43.5
Refer to page 113 for the dimensions of the metal bowl option filter and
VacF/R page 124 for the oil mist filter. G59P (77) ø52
G40P (76.5) ø42.5
Clean FR
G52P (86) ø52.5
ElecPneuR R2 (75) 30
AirBoost
Speed Ctrl C6030-W

Silncr
CheckV/ 20
other 14 8
Fit/Tube
340
Nozzle Rc1 1/4:346
270
15

Air Unit
9

65 90 90
PrecsCompn O Dimensions of bracket section
67 Attachment
Electro A W (Pipe adaptor set)
Press SW 45
65

ContactSW
50

40

OUT
AirSens
P

.4 .6
.2 .8

IN
1.0
ＭＰａ

PresSW
Port size
70

Cool
85

Air Flo Attachment Rc3/4(20)

Sens/Ctrl (pressure gauge) Rc1(25)

WaterRtSens With PPR

210

TotAirSys option
(Total Air)
TotAirSys
(Gamma)
Gas Bore size ø5.7 to ø6
generator Soft nylon tube Pressure gauge attached optional dimensions table
RefrDry Bore size ø5
Soft vinyl tube Pressure gauge O P
DesicDry G45P (80) ø39
60

Drain outlet
Maintenance dimensions
HiPolymDry G49P (79.5) ø43.5
G59P (82) ø52
MainFiltr
G40P (81.5) ø42.5
Dischrg
etc G52P (93) ø52.5
R2 (80) 30
Ending
58
 F.M.R. Combination
Option assembly dimensions
Dimensions F.R.L.
370
C8030-W F.R.
O Rc1 1/4:376
20
72 300 F (Filtr)
65 50 100 100 Attachment
14
8 R (Reg)
A W (Pipe adaptor set)

15
L (Lub)
65

P
50

Drain

40

9
Separ
Mech
IN
Press SW
OUT
70

Res press
85

Enlarged view of exh valve

Attachment bracket section
(pressure gauge) Port size SlowStart
With PPR Rc3/4(20) Anti-bac/Bac-
option Rc1(25) remove Filt
Film
Resist FR
303

Pressure gauge attached optional dimensions table Oil-ProhR

Pressure gauge O P Med
Press FR
G45P (85) ø29 No Cu/
G49P (84.5) ø43.5 PTFE FRL

Bore size ø5.7 to ø6 G59P (87) ø52 Outdrs FRL

Soft nylon tube G40P (86.5) ø42.5 Adapter
Bore size ø5 Joiner
G52P (98) ø52.5
200

Soft vinyl tube Press

Drain outlet R2 (85) 30 Gauge
Maintenance dimensions CompFRL
Refer to page 113 for the dimensions of the metal bowl option filter and
page 124 for the oil mist filter. LgFRL
PrecsR
Option assembly dimensions
VacF/R
C1030-W to C8030-W
Clean FR
ElecPneuR
Model No. A B
A

IN OUT
C1030-W 35 45 AirBoost
2-piping bore size
C2030-W Speed Ctrl
B

C2530-W
45 60 Silncr
C3030-W
CheckV/
C4030-W other
C6030-W Fit/Tube
50 70
C8030-W
Nozzle
L1 L2 Air Unit
L3
PrecsCompn
Assembled option D S (*1) P V K DS (*1) DP DV DK Electro
Model No. L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 Press SW
C1030-W 40 68 148 40 80 169.5 - - - 40 80 160 - - - 40 108 197.5 - - - 40 108 188 - - - ContactSW
C2030-W 50 81.5 181.5 50 100 201.5 50 100 230 50 100 213 50 100 213 50 131.5 233 50 131.5 261.5 50 131.5 244.5 50 131.5 244.5
C2530-W 63 94.5 207.5 63 113 227.5 63 113 256 63 113 239 63 113 239 63 144.5 259 63 144.5 287.5 63 144.5 270.5 63 144.5 270.5
AirSens
PresSW
C3030-W 63 94.5 220.5 63 126 240.5 63 126 269 63 126 252 63 126 252 63 157.5 272 63 157.5 300.5 63 157.5 283.5 63 157.5 283.5
Cool
C4030-W 80 111.5 271.5 80 160 291.5 80 160 320 80 160 303 80 160 303 80 191.5 323 80 191.5 351.5 80 191.5 334.5 80 191.5 334.5 Air Flo
C4030-20-W *1 100 111.5 311.5 100 160 311.5 100 160 360 100 160 353 100 160 343 100 191.5 343 100 191.5 391.5 100 191.5 374.5 100 191.5 374.5 Sens/Ctrl
C6030-W 90 140 320 90 180 355 - - - - - - 90 180 360 90 230 405 - - - - - - 90 230 410 WaterRtSens
C8030-W 100 150 350 100 200 385 - - - - - - 100 200 390 100 250 435 - - - - - - 100 250 440 TotAirSys
Assembled option DSV DSK DPV DPK SV SK PV PK (Total Air)
TotAirSys
Model No. L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 (Gamma)
C1030-W 40 136 216 - - - - - - - - - 40 108 188.0 - - - - - - - - - Gas
C2030-W 50 163 276 50 163 276 50 211.5 325 50 211.5 325 50 131.5 244.5 50 131.5 244.5 50 180 293 50 180 293
generator
C2530-W 63 176 302 63 176 302 63 225 351 63 225 351 63 144.5 270.5 63 144.5 270.5 63 193 319 63 193 319 RefrDry
C3030-W 63 189 315 63 189 315 63 238 364 63 238 364 63 157.5 283.5 63 157.5 283.5 63 206 332 63 206 332
DesicDry
C4030-W 80 223 366 80 223 366 80 271.5 414.5 80 271.5 414.5 80 191.5 334.5 80 191.5 334.5 80 240 383 80 240 383
C4030-20-W *1 100 223 406 100 223 406 100 271.5 454.5 100 271.5 454.5 100 191.5 374.5 100 191.5 374.5 100 240 423 100 240 423 HiPolymDry
C6030-W - - - 90 280 460 - - - - - - - - - 90 230 410 - - - - - - MainFiltr
C8030-W - - - 100 300 490 - - - - - - - - - 100 250 440 - - - - - - Dischrg
L1: Dimensions from the IN edge to center of the T-bracket mounting hole * Refer to page 346 for details on bracket mounting hole dimensions. etc
L2: ‌Spacing dimensions of the mounting hole from the first T-bracket *1: The pipe adaptor is assembled on the OUT side.
to the second T-bracket As well, the pipe adaptor A400-20-W is assembled on both ends of C4030-20-W.
Ending
L3: Dimensions from the IN edge to the OUT edge
59
 W.M. combination Standard White Series

F.R.L.
C1040/C2040/C3040/C4040/C8040-W Series
Filter/regulator and oil mist filter integrated.
F.R.
Port size: 1/8 to 1
F (Filtr)
JIS symbol
R (Reg)
L (Lub)
Drain
Separ
Mech
Specifications 1 MPa ≈ 145.0 psi, 1 MPa = 10 bar
Press SW Item C1040-W C2040-W C3040-W C4040-W C8040-W
Res press
exh valve
SlowStart
Anti-bac/Bac-
remove Filt
Film
Resist FR
Oil-ProhR
Med Appearance
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Adapter
Joiner
Press
Gauge
CompFRL
Filter/regulator W1000-W W2000-W W3000-W W4000-W W8000-W
LgFRL Comps Oil mist filter M1000-W M2000-W M3000-W M4000-W M8000-W
PrecsR Working fluid Compressed air

VacF/R Max. working pressure MPa 1.0 (≈150 psi, 10 bar) *3

Proof pressure MPa 1.5 (≈220 psi, 15 bar)
Clean FR
Ambient / fluid temperatures °C 5 (41°F) to 60 (140°F) *2
ElecPneuR Set pressure MPa 0.1 to 0.85 *3 0.1 (≈15 psi, 1 bar) to 0.85 (≈120 psi, 8.5 bar) *5, *6
AirBoost Pressure relief With relief mechanism

Speed Ctrl Port size Rc,NPT,G 1/8, 1/4 (3/8 uses an adaptor) 1/4, 3/8 (1/2 uses an adaptor) 1/4, 3/8 (1/2 uses an adaptor) 1/4, 3/8, 1/2 (3/4 uses an adaptor) 3/4, 1 (1 1/4 uses an adaptor)
Weight kg 0.31 0.74 0.97 1.52 3.52
Silncr
Secondary oil concentration 0.01 mg/m3 or less (0.1 mg/m3 or less after oil saturation)
CheckV/
other Max. flow rate (*1) m3/min 0.15 0.25 0.36 0.825 2.6
Fit/Tube *1: Max. flow rate is for the regulator set pressure 0.7 MPa. Refer to page 108 for the max. flow rate of element option “Y”.
*2: The ambient / fluid temperatures for “RN” or “RP” (pressure switch with display PPR is mounted) and “R2” (digital pressure sensor PPX is attached) is 5 to 50°C.
Nozzle *3: When using C1040-W Series “F1” with auto-drain, the min. working pressure is 0.2 MPa and max. working pressure is 0.7 MPa. Refer to
Air Unit the max. working flow rate table (page 108) for F1000-W-F1 auto-drain for the max. working flow rate. Set the working flow rate to less than
or equal to the max. working flow rate.
PrecsCompn *4: Refer to page 116 for details on other oil mist filters.
*5: In the case of “F” with auto-drain, the supply air pressure is 0.2 MPa or more. The minimum set pressure is 0.15 MPa. The supply air pressure of the auto-drain
Electro
Press SW of the filter regulator is 0.1 MPa. Air is purged with initial drain until pressure reaches 0.1 MPa.
*6: In the case of “F1” with auto-drain, the supply air pressure is 0.2 MPa or more. The minimum set pressure is 0.15 MPa.
ContactSW
AirSens
Option weight
* Add to the weight of the standard accessories. Unit: kg
PresSW
Cool Drain discharge Bowl material Pressure gauge Pipe adaptor set
Air Flo Code
Sens/Ctrl F F1 FF FF1 M M1 T* RN/RP A6*W A8*W A10*W A15*W A20*W A25*W A32*W
WaterRtSens C1040 0.014 0 0.04 0.09 0.09 0.09
TotAirSys C2040 0.04 0.2 0 0.04 0.16 0.16 0.16
(Total Air) C3040 0.04 0.04 0.2 0.2 0 0.04 0.16 0.16 0.16
TotAirSys
(Gamma) C4040 0.04 0.04 0.2 0.2 0 0.04 0.16 0.16 0.16 0.16
Gas
generator C8040 0.04 0.04 0.04 0.04 0.2 0.2 0 0.04 0.53 0.53 0.53
RefrDry
Assembled components Pressure gauge
DesicDry Code S P V K G45P G49P G59P G40P G52P R2
HiPolymDry C1040 0.15 0.18 0.074 0.086 0.115 0.085 0.15 0.04
MainFiltr C2040 0.23 0.54 0.29 0.34 0.074 0.086 0.085 0.15 0.04
Dischrg C3040 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
etc C4040 0.23 0.54 0.29 0.34 0.074 0.086 0.115 0.085 0.15 0.04
Ending C8040 0.51 0.34 0.074 0.086 0.115 0.085 0.15 0.04

60
 W.M. Combination
How to order
How to order * ‌Refer to page 30 for the F.R.L.
C1040 6 W F1 U SV A6W explanation of the option. A Model No.
F.R.
H Pressure gauge option (included) F (Filtr)

C1040

C2040

C3040

C4040

C8040
Code Description
R (Reg)
A Model No. B Port size
B Port size 6 1/8 L (Lub)
8 1/4 Drain
10 3/8 Separ
15 1/2 Mech
20 3/4 Press SW
Res press
25 1
exh valve
C Port thread *2
C Port thread SlowStart
Blank Rc thread
Anti-bac/Bac-
N NPT thread
remove Filt
G G thread Film
D Option *3 Resist FR
D Option With manual drain cock
Blank Oil-ProhR
F Auto-drain with manual override (NO: Exhaust when not pressurized) Med
Drain
F1 Auto-drain with manual override (NC: No exhaust when not pressurized) Press FR
E Assembled components discharge
FF Large auto-drain with manual override (NO: Exhaust when not pressurized) No Cu/
*4, *5 PTFE FRL
FF1 Large auto-drain with manual override (NC: No exhaust when not pressurized)
Blank Polycarbonate bowl Outdrs FRL
F Display unit
Bowl Z Nylon bowl Adapter
*12 Metal bowl
material M Joiner
G Pipe adaptor set M1 Metal bowl with manual drain cock Press
(included) Blank 5 μm Gauge
Element
0.3 μm (submicron) *6 CompFRL
Precautions for model No. selection
Y
Diff press Blank Without differential pressure detection port
With differential pressure detection port (Rc 1/4) LgFRL
*1: Pipe adaptor A400-20*-W is assembled on both ends of detect Q
C4040-20*-W. A20*W does not need to be selected for the pipe Pressure Blank 0.1 to 0.85 MPa
PrecsR
adaptor set. range L 0.1 to 0.35 MPa *7
*2: G threads and NPT threads are available for IN, OUT, gauge Pressure Blank With relief mechanism VacF/R
port and drain outlet (metal bowl with auto-drain). Attachments P relief N Non-relief
and V are also included. Blank With standard pressure gauge (G401-W) Clean FR
*3: Select options for the drainage, bowl material, element, T No pressure gauge (gauge port (1/4) is assembled sealed)
differential pressure detection and regulator. When selecting
ElecPneuR
Pressure T8 Pressure gauge ready (gauge port (1/4) is left open)
options for several items, list options in order from the top. gauge T6 Digital pressure sensor PPX included option *8 AirBoost
*4: Refer to page 354 for the auto-drain usage conditions. RN Pressure switch with display PPR mounted (NPN output 1 point)
*5: When option code “F” is selected, the NO auto-drain is included RP Pressure switch with display PPR mounted (PNP output 1 point) Speed Ctrl
with the filter/regulator and the NC auto-drain is included with the Flow Blank Standard flow (left → right)
oil mist filter. When option code “F1” is selected, the NC auto-drain Silncr
direction X1 Reverse flow (right → left)
is included with the filter/regulator oil mist filter. For “FF” and “FF1”, CheckV/
only the filter/regulator has a large discharge rate. The oil mist filter E Assembled components Pages 166 to 171, 182 to 187, 348 and 349 other
is normal NC auto-drain. Blank Without assembled component
Fit/Tube
*6: Refer to page 108 for max. processing flow rate when U Assembled component *9
option “Y” is selected. S Pressure switch (P1100-W, 4100-W, 8100-W) Nozzle
component
Assembled

*7: The pressure gauge’s indication range is 0 to 0.4 MPa for the P Pressure switch (P4000-W)
option “L”. V Residual pressure exhaust valve (V1000-W, 3000-W) Air Unit
*8: When option “T6” is selected, only “Blank” or “R2” can be K Residual pressure exhaust valve with keyhole (V3010-W, V6010-W)
selected for H● Pressure gauge (included). The digital pressure PrecsCompn
F Display unit
sensor PPX mounting port (Rc1/8) is left open. Electro
*9: Installation position for assembled components Blank MPa display (Rc thread), psi display (NPT thread), bar display (G thread) Press SW
J1 MPa display (NPT, G thread)
Code Attachment Install positions Compatible model ContactSW
G Pipe adaptor set (included) Page 350 *10
S C1040-W to C8040-W
or W+(S,P)+M (“P” excludes 1000 and Blank Not included AirSens
P 8000 Series) A6*W 1/8 pipe adaptor set PresSW
1/4 pipe adaptor set Cool
V C1040-W to C8040-W (“V” A8*W
3/8 pipe adaptor set
Air Flo
or W+M+(V,K) excludes 8000 Series and A10*W
Sens/Ctrl
K “K” excludes 1000 Series) A15*W 1/2 pipe adaptor set
A20*W 3/4 pipe adaptor set WaterRtSens
Note) Indicate “U”+“S”, “P”,“V” and “K” when selecting an assembled
component. A25*W 1 pipe adaptor set TotAirSys
1 1/4 pipe adaptor set (Total Air)
Use customized combination specifications sheet for any other A32*W
TotAirSys
combination. * Adaptor thread
(Gamma)
*10: The joiner set is enclosed with the pipe adaptor set. Blank Rc thread Gas
*11: The pressure gauge option (included) can be selected only when N NPT thread generator
C Port thread is Rc thread. G G thread
*12: Display unit options when selecting NPT threads: If Blank is selected, the
RefrDry
H Pressure gauge option (included) Page 363 *11
pressure unit is psi and the temperature display unit is °F. DesicDry
Blank Not included
When G thread and Blank display unit option are selected, the
G45P G45D-8-P10(L:G45D-8-P04)
pressure unit will be bar and the temperature display unit will be HiPolymDry
G49P G49D-8-P10(L:G49D-8-P04)
°C.
G59P G59D-8-P10(L:G59D-8-P04) MainFiltr
When NPT/G thread and “J1” display unit option are selected,
the pressure unit will be MPa and the temperature display unit G40P G40D-8-P10(L:G40D-8-P04) Dischrg
will be °C. G52P G52D-8-P10(L:G52D-8-P10) etc
R2 *8
Digital pressure sensor: PPX-R10N-6M
Ending
61
 W.M. Combination
F.R.L. Dimensions

when the knob

F.R. C1040-W

Dimensions

2.5 is operated
F (Filtr) P 123 11 7.5
49
R (Reg) 80 7.5
40 36
40

10 5.5
L (Lub)
Drain
Separ
Mech Attachment
Press SW A W (Pipe adaptor set)

68.5
Res press
Enlarged view of
Q
exh valve
45
35

SlowStart bracket section

Anti-bac/Bac-
remove Filt · Optional dimensions
Film IN With auto-drain (F1)
Port size
45

Resist FR OUT
55

Rc1/8(6)
Oil-ProhR Tube center
Rc1/4(8)
Attachment
98

Med (pressure gauge)

Press FR
No Cu/ With PPR
PTFE FRL option

92
Outdrs FRL
Adapter
Bore size ø4
60

Joiner
Press Soft nylon tube
Gauge Drain outlet Maintenance dimensions
M5
CompFRL Drain outlet

LgFRL Pressure gauge attached optional dimensions table

PrecsR Pressure gauge P Q
G45P (74) ø39
VacF/R
G49P (73.5) ø43.5
Clean FR G59P (76) ø52
ElecPneuR G40P (75.5) ø42.5
G52P (86) ø52.5
AirBoost
R2 (74) 30
Speed Ctrl
Silncr
CheckV/ C2040-W
other
when the knob

P 140
Fit/Tube
Dimensions

is operated

100
Nozzle
45 35.5
Air Unit 50
7
3

PrecsCompn
Electro
Press SW Attachment
ContactSW (Pipe adaptor set)
88.5

AirSens
Q
55

PresSW
45

Cool
Air Flo IN OUT
Sens/Ctrl Port size
WaterRtSens Rc1/4(8)
1.5
60

Rc3/8(10)
70

TotAirSys
(Total Air)
TotAirSys
(Gamma)
147

Gas Attachment
generator (pressure gauge)
RefrDry
Pressure gauge attached optional dimensions table
DesicDry Pressure gauge P Q
HiPolymDry G45P (73.5) ø39
G49P (73) ø43.5
Maintenance
dimensions

MainFiltr Bore size ø5.7 to ø6

Dischrg Soft nylon tube G40P (75) ø42.5
60

Bore size ø5
etc G52P (85.5) ø52.5
Soft vinyl tube
Ending R2 (73) 30
Drain outlet

62
 W.M. Combination
Dimensions
Dimensions F.R.L.
C3040-W F.R.

when the knob

Dimensions

is operated
F (Filtr)
P 166
57 R (Reg)
126
45 (34.5)
63 L (Lub)

3
Drain
Separ
Mech
Attachment 14
7 Press SW
104 A W (Pipe adaptor set) Res press
exh valve

7
SlowStart
Q
55
45

2.5

Anti-bac/Bac-
IN OUT
remove Filt
Film
Resist FR
Enlarged view of
60

Port size
70

bracket section Oil-ProhR

Attachment PRESS
TURN
PRESS
TURN
Rc1/4(8)
(pressure gauge)
Med
Rc3/8(10) Press FR
No Cu/
148

PTFE FRL
Pressure gauge attached optional dimensions table Outdrs FRL
With PPR
Adapter
Bore size ø5.7 to ø6 option Pressure gauge P Q
Joiner
Soft nylon tube G45P (70) ø39 Press
Bore size ø5 G49P (69.5) ø43.5 Gauge
Soft vinyl tube
60

G59P (72) ø52 CompFRL

Drain outlet
Maintenance dimensions G40P (71.5) ø42.5 LgFRL
G52P (82) ø52.5
PrecsR
R2 (69.5) 30
VacF/R
Refer to page 96 for the dimensions of the metal bowl option filter/
regulator and page 124 for the oil mist filter. Clean FR
ElecPneuR
C4040-W AirBoost
Speed Ctrl
when the knob
Dimensions

is operated

Silncr
200
P Rc3/4:210
14
7 CheckV/
62 other
160
55 (42.5) Fit/Tube
7

80
3

Nozzle
Air Unit
Attachment
A W (Pipe adaptor set) Enlarged view of PrecsCompn
110

bracket section Electro

Press SW
Q
55
45

2.5

IN OUT
ContactSW
AirSens
PresSW
60

Port size
70

Cool
Attachment PRESS
TURN
PRESS
TURN Rc1/4(8) Air Flo
(pressure gauge) Rc3/8(10) Sens/Ctrl
Rc1/2(15) WaterRtSens
171

TotAirSys
(Total Air)
With PPR TotAirSys
Bore size ø5.7 to ø6 option (Gamma)
Gas
Soft nylon tube Pressure gauge attached optional dimensions table generator
Bore size ø5
Soft vinyl tube
Pressure gauge P Q RefrDry
60

Drain outlet G45P (75) ø39

Maintenance dimensions G49P (74.5) ø43.5
DesicDry
G59P (77) ø52 HiPolymDry
G40P (76.5) ø42.5 MainFiltr
Refer to page 96 for the dimensions of the metal bowl option filter/
G52P (86) ø52.5
regulator and page 124 for the oil mist filter. Dischrg
R2 (75) 30 etc

Ending
63
 W.M. Combination
F.R.L. Dimensions
F.R. C8040-W

when the knob

F (Filtr)

Dimensions

is operated
R (Reg) 270
P Rc1 1/4:276
L (Lub) 72 200
65 50 100

4
Drain
Separ 20
Mech 14
Press SW 8

15
Res press
exh valve Attachment
159

A W (Pipe adaptor set)

SlowStart

9
Anti-bac/Bac-
65

Q
50

remove Filt
Film
Resist FR Enlarged view of
70

bracket section
85

Oil-ProhR IN OUT Port size

Attachment
Med Rc3/4(20)
(pressure gauge)
Press FR Rc1(25)
No Cu/
PTFE FRL With PPR
Outdrs FRL option
303

Adapter
Joiner
Press
Gauge Pressure gauge attached optional dimensions table
Bore size ø5.7 to ø6
CompFRL Soft nylon tube
Pressure gauge P Q
Bore size ø5
LgFRL Soft vinyl tube G45P (85) ø39
200

Drain outlet Maintenance G49P (84.5) ø43.5

PrecsR
dimensions G59P (87) ø52
VacF/R G40P (86.5) ø42.5
Clean FR G52P (98) ø52.5
Refer to page 96 for the dimensions of the metal bowl option filter/
regulator and page 124 for the oil mist filter. R2 (85) 30
ElecPneuR
AirBoost
Speed Ctrl
Silncr
CheckV/
other
Fit/Tube
Nozzle
Air Unit
PrecsCompn
Electro
Press SW
ContactSW
AirSens
PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
64
 W.M. Combination
Option assembly dimensions
Option assembly dimensions F.R.L.
C1040-W to C8040-W F.R.
F (Filtr)
R (Reg)
L (Lub)
Model No. A B
Drain
C1040-W 35 45 Separ
C2040-W Mech
Press SW
C3040-W 45 60 Res press

A
C4040-W exh valve

C8040-W 50 70 SlowStart
Anti-bac/Bac-

B
remove Filt
Film
Resist FR
Oil-ProhR
Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Adapter
L1 L2 Joiner
Press
Gauge
L3 CompFRL
LgFRL

Assembled option S P V K SV SK PV PK PrecsR

Model No. L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 L1 L2 L3 VacF/R
C1040-W 40 28 108 - - - 40 40 120 - - - 40 68 148 - - - - - - - - -
Clean FR
C2040-W 50 31.5 131.5 50 80 180 50 63 163 50 63 163 50 81.5 194.5 50 81.5 194.5 50 130 243 50 130 243
C3040-W 63 31.5 157.5 63 80 206 63 63 189 63 63 189 63 94.5 220.5 63 94.5 220.5 63 143 269 63 143 269 ElecPneuR
C4040-W 80 31.5 191.5 80 80 240 80 80 223 80 80 223 80 111.5 254.5 80 111.5 254.5 80 160 320 80 160 320 AirBoost
C4040-20-W *1 100 31.5 231.5 100 80 280 100 100 263 100 100 263 100 111.5 294.5 100 111.5 294.5 100 160 343 100 160 343
Speed Ctrl
C8040-W 100 50 250 - - - - - - 100 100 290 - - - 100 150 340 - - - - - -
Silncr
L1: ‌Dimensions from the IN edge to center of the T-bracket * Refer to page 346 for details on bracket mounting hole dimensions.
mounting hole *1: The pipe adaptor is assembled on the OUT side. CheckV/
L2: ‌Spacing dimensions of the mounting hole from the first As well, the pipe adaptor A400-20-W is assembled on both ends of C4040-20-W.
other
T-bracket to the second T-bracket Fit/Tube
L3: Dimensions from the IN edge to the OUT edge
Nozzle
Air Unit
PrecsCompn
Electro
Press SW
ContactSW
AirSens
PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
65
 R.M. combination Standard White Series
C1050/C2050/C2550
F.R.L.
C3050/C4050/C6050/C8050-W Series
Integrated regulator and oil mist filter
F.R.
● Port size: 1/8 to 1
F (Filtr)
JIS symbol
R (Reg)
L (Lub)
Drain
Separ
Mech
Specifications 1 MPa ≈ 145.0 psi, 1 MPa = 10 bar
Press SW Item C1050-W C2050-W C2550-W C3050-W C4050-W C6050-W C8050-W
Res press
exh valve
SlowStart
Anti-bac/Bac-
remove Filt
Film
Resist FR
Appearance
Oil-ProhR
Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Adapter Regulator R1000-W R2000-W R2000-W R3000-W R4000-W R6000-W R8000-W
Joiner Comps
Press Oil mist filter M1000-W M2000-W M3000-W M3000-W M4000-W M6000-W M8000-W
Gauge Working fluid Compressed air
CompFRL Max. working pressure MPa 1.0 (≈150 psi, 10 bar) *3
LgFRL Proof pressure MPa 1.5 (≈220 psi, 15 bar)
Ambient / fluid temperatures °C 5 (41°F) to 60 (140°F) *2
PrecsR
Set pressure MPa 0.1 to 0.85 *3 0.1 (≈15 psi, 1 bar) to 0.85 (≈120 psi, 8.5 bar) *4
VacF/R Pressure relief With relief mechanism
Clean FR 1/8,1/4 1/4,3/8 1/4,3/8 1/4,3/8 1/4,3/8,1/2 3/4,1 3/4,1
Port size Rc,NPT,G
ElecPneuR (3/8 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (1/2 uses an adaptor) (3/4 uses an adaptor) (1 1/4 uses an adaptor) (1 1/4 uses an adaptor)
Weight kg 0.29 0.65 0.66 0.82 1.32 2.12 3.12
AirBoost
Secondary oil concentration 0.01 mg/m3 or less (0.1 mg/m3 or less after oil saturation)
Speed Ctrl Max. flow rate (*1) m3/min 0.15 0.25 0.36 0.36 0.825 1.27 2.6
Silncr *1: Max. flow rate is for the regulator set pressure 0.7 MPa.
CheckV/ *2: The ambient / fluid temperatures for “RN” or “RP” (pressure switch with display PPR is mounted) and “R2” (digital pressure sensor PPX is attached) is 5 to 50°C.
other *3: When using C1050-W Series “F1” with auto-drain, the min. working pressure is 0.2 MPa and max. working pressure is 0.7 MPa. Refer to
Fit/Tube the max. working flow rate table (page 119) for M1000-W-F1 auto-drain for the max. working flow rate. Set the working flow rate to less than
or equal to the max. working flow rate.
Nozzle *4: The supply air pressure is 0.2 MPa and over with a min. set pressure of 0.15 MPa.
*5: Refer to page 116 for details on other oil mist filters.
Air Unit
Option weight
PrecsCompn * Add to the weight of the standard accessories. Unit: kg
Electro
Press SW Drain discharge Bowl material Pressure gauge Pipe adaptor set
Code
ContactSW F F1 FF FF1 M M1 T* RN/RP A6*W A8*W A10*W A15*W
C1050 0.007 0 0.04 0.09 0.09 0.09
AirSens
C2050 0.02 0.1 0 0.04 0.16 0.16 0.16
PresSW
Cool C2550 0.02 0.1 0.1 0 0.04 0.16 0.16 0.16
Air Flo
Sens/Ctrl C3050 0.02 0.02 0.1 0.1 0 0.04 0.16 0.16 0.16
WaterRtSens C4050 0.02 0.02 0.1 0.1 0 0.04 0.16 0.16 0.16
TotAirSys C6050 0.02 0.02 0.1 0.1 0 0.04
(Total Air)
C8050 0.02 0.02 0.02 0.02 0.1 0.1 0 0.04
TotAirSys
(Gamma)
Gas Pipe adaptor set Pressure gauge
generator Code
A20*W A25*W A32*W G45P G49P G59P G40P G52P R2
RefrDry
C1050 0.074 0.086 0.115 0.085 0.15 0.04
DesicDry C2050 0.074 0.086 0.085 0.15 0.04
HiPolymDry C2550 0.074 0.086 0.115 0.085 0.15 0.04
MainFiltr C3050 0.074 0.086 0.115 0.085 0.15 0.04
Dischrg C4050 0.16 0.074 0.086 0.115 0.085 0.15 0.04
etc C6050 0.53 0.53 0.53 0.074 0.086 0.115 0.085 0.15 0.04
Ending C8050 0.53 0.53 0.53 0.074 0.086 0.115 0.085 0.15 0.04

66
 R.M. Combination
How to order
How to order A Model No. F.R.L.
* ‌Refer to page 30 for the explanation F.R.
C1050 6 W L A6W of the option.
F (Filtr)

C1050
C2050
C2550
C3050
C4050
C6050
C8050
Code Description R (Reg)
B Port size L (Lub)
A Model No. B Port size 6 1/8 ● Drain
8 1/4 ● ● ● ● ● Separ
Mech
10 3/8 ● ● ● ●
Press SW
15 1/2 ● Res press
exh valve
20 3/4 ● *1 ● ●
25 1 ● ● SlowStart
Anti-bac/Bac-
C Port thread *2 remove Filt
C Port thread
Blank Rc thread ● ● ● ● ● ● ● Film
Resist FR
N NPT thread ● ● ● ● ● ● ●
G G thread ● ● ● ● ● ● ●
Oil-ProhR
Med
D Option *3 Press FR
D Option No Cu/
Drain Blank Filter with manual drain cock ● ● ● ● ● ● ●
discharge PTFE FRL
*4 F1 Auto-drain, man OVRD (NC: no press→no exhaust) ● ● ● ● ● ● ●
Outdrs FRL
Blank Polycarbonate bowl ● ● ● ● ● ● ●
Adapter
Bowl Z Nylon bowl ● ● ● ● ● ● ● Joiner
material M Metal bowl ● ● ● ● ● Press
Gauge
M1 Metal bowl with manual drain cock ● ● ● ● ● ●
Diff press Blank Without differential pressure detection port ● ● ● ● ● ● ●
CompFRL
detect Q With differential pressure detection port (Rc 1/4) ● ● LgFRL
Pressure Blank 0.1 to 0.85 MPa ● ● ● ● ● ● ●
PrecsR
range L 0.1 to 0.35 MPa *5 ● ● ● ● ● ● ●
Pressure Blank With relief mechanism ● ● ● ● ● ● ● VacF/R
relief N Non-relief ● ● ● ● ● ● ● Clean FR
Blank With standard pressure gauge (G401-W) ● ● ● ● ● ● ●
ElecPneuR
T No pressure gauge (gauge port (1/4) is assembled sealed) ● ● ● ● ● ● ●
Pressure T8 Pressure gauge ready (gauge port (1/4) is left open) ● ● ● ● ● ● ● AirBoost
gauge T6 Digital pressure sensor PPX included option *6 ● ● ● ● ● ● ●
Speed Ctrl
RN Pressure switch with display PPR mounted (NPN output 1 point) ● ● ● ● ● ●
RP Pressure switch with display PPR mounted (PNP output 1 point) ● ● ● ● ● ● Silncr
Flow Blank Standard flow (left → right) ● ● ● ● ● ● ● CheckV/
other
direction X1 Reverse flow (right → left) ● ● ● ● ● ● ●
Fit/Tube
E Display unit
E Display unit
Blank MPa display (Rc thread), psi display (NPT thread), bar display (G thread) ● ● ● ● ● ● ●
Nozzle
*9
J1 MPa display (NPT, G thread) ● ● ● ● ● ● ● Air Unit
F Pipe adaptor set
(included) F Pipe adaptor set (included) Page 350 *7 PrecsCompn
G Pressure gauge option (included) Blank Not included ● ● ● ● ● ● ● Electro
A6*W 1/8 pipe adaptor set ● Press SW
Precautions for model No. selection A8*W 1/4 pipe adaptor set ● ● ● ● ● ContactSW
*1: Pipe adaptor A400-20*-W is assembled on both ends of A10*W 3/8 pipe adaptor set ● ● ● ● ●
C4050-20*-W. A20*W does not need to be selected for the AirSens
pipe adaptor set. A15*W 1/2 pipe adaptor set ● ● ● ● PresSW
*2: G threads and NPT threads are available for IN, OUT, gauge A20*W 3/4 pipe adaptor set ● ● ● Cool
port and drain outlet (metal bowl with auto-drain). Air Flo
*3: Select options for the drainage, bowl material, element, A25*W 1 pipe adaptor set ● ●
Sens/Ctrl
differential pressure detection and regulator. When selecting A32*W 1 1/4 pipe adaptor set ● ●
options for several items, list options in order from the top. WaterRtSens
*4: Refer to page 354 for the auto-drain usage conditions. * Adaptor thread TotAirSys
*5: The pressure gauge indication range of option “L” is 0 to 0.4 MPa. Blank Rc thread ● ● ● ● ● ● ● (Total Air)
*6: When option “T6” is selected, only “Blank” or “R2” can be TotAirSys
N NPT thread ● ● ● ● ● ● ●
selected for ●
H Pressure gauge (included). The digital pressure (Gamma)
sensor PPX mounting port (Rc1/8) is left open. G G thread ● ● ● ● ● ● ● Gas
*7: The joiner set is enclosed with the pipe adaptor set. generator
*8: The pressure gauge option (included) can be selected only G Pressure gauge option (included) Page 363 *8
when C Port thread is Rc thread. Blank Not included ● ● ● ● ● ● ●
RefrDry
*9: Display unit options when selecting NPT threads: If Blank is
selected, the pressure unit is psi and the temperature display G45P G45D-8-P10(L:G45D-8-P04) ● ● ● ● ● ● ● DesicDry
unit is °F. G49P G49D-8-P10(L:G49D-8-P04) ● ● ● ● ● ● ●
When G thread and Blank display unit option are selected, the HiPolymDry
G59P G59D-8-P10(L:G59D-8-P04) ● ● ● ● ● ●
pressure unit will be bar and the temperature display unit will
be °C. G40P G40D-8-P10(L:G40D-8-P04) ● ● ● ● ● ● ● MainFiltr
When NPT/G thread and “J1” display unit option are selected, G52P G52D-8-P10(L:G52D-8-P10) ● ● ● ● ● ● ● Dischrg
the pressure unit will be MPa and the temperature display unit etc
will be °C. R2 *6 Digital pressure sensor: PPX-R10N-6M ● ● ● ● ● ● ●
Ending
67
 R.M. Combination
F.R.L. Dimensions
F.R. ● C1050-W
F (Filtr) 11 7.5
123 7.5
R (Reg) O
Attachment

5.5
49 80
L (Lub) 40
A□W (Pipe adaptor set)
40 36

10
Drain
Separ
Mech
Press SW
45

Res press Enlarged view of bracket section

35

exh valve 24.5

IN OUT · Optional dimensions
SlowStart
With auto-drain (F1)
Anti-bac/Bac-
remove Filt
45

P
55

Film Port size Tube center

Resist FR With PPR Rc1/8(6)
option
98

Rc1/4(8)
Oil-ProhR
Med Attachment

92
Press FR (pressure gauge)
No Cu/
PTFE FRL Bore size ø4
Outdrs FRL Soft nylon
Tube
60

Adapter
Drain outlet
Joiner Maintenance dimensions M5
Press Drain outlet
Gauge
CompFRL
Pressure gauge attached optional dimensions table
LgFRL
Pressure gauge O P
PrecsR G45P (74) ø39
VacF/R G49P (73.5) ø43.5
G59P (76) ø52
Clean FR
G40P (75.5) ø42.5
ElecPneuR G52P (86) ø52.5
AirBoost R2 (74) □30

Speed Ctrl
Silncr ● C2050-W
CheckV/
other
P
Fit/Tube
140
Nozzle
45 35.5 100
Air Unit
7 50 Attachment
PrecsCompn
(Pipe adaptor set)
Electro
Press SW
Q

ContactSW
1.5
55

45

AirSens
IN OUT
PresSW
Cool Port size
Air Flo
Sens/Ctrl Rc1/4(8)
60
70

Rc3/8(10)
WaterRtSens
TotAirSys
(Total Air) Attachment
147

TotAirSys (pressure gauge)

(Gamma)
Gas
generator
RefrDry Pressure gauge attached optional dimensions table
Pressure gauge P Q
DesicDry
G45P (73.5) ø39
Maintenance

HiPolymDry
dimensions

Bore size ø5.7 to ø6 G49P (73) ø43.5

Soft nylon tube
MainFiltr
60

Bore size ø5 G40P (75) ø42.5

Dischrg Soft vinyl tube G52P (85.5) ø52.5
etc Drain outlet R2 (73) □30
Ending
68
 R.M. Combination
Dimensions
Dimensions F.R.L.
● C2550-W F.R.
F (Filtr)
O
49 153
14
R (Reg)
7
45 35.5 113 L (Lub)

7
Attachment
7 50 A□W (Pipe adaptor set) Drain
Separ
Mech
Press SW
Dimensions of Res press
bracket section exh valve
55
45

31.5
IN OUT
SlowStart
P

Anti-bac/Bac-
remove Filt
Film
60
70

Port size Resist FR

Attachment Rc1/4(8)
(pressure gauge) Oil-ProhR
Rc3/8(10)
Med
148

With PPR Press FR

option No Cu/
PTFE FRL
Outdrs FRL
Bore size ø5.7 to ø6 Pressure gauge attached optional dimensions table
Soft nylon tube Adapter
Bore size ø5 Pressure gauge O P Joiner
Press
Maintenance

Soft vinyl tube G45P (73.5) ø39

dimensions

Gauge
Drain outlet G49P (73) ø43.5
CompFRL
60

G59P (75.5) ø52

G40P (75) ø42.5
LgFRL
G52P (85.5) ø52.5 PrecsR
R2 (73) □30
VacF/R
Clean FR
ElecPneuR
AirBoost
● C3050-W Speed Ctrl
Silncr
14 CheckV/
166 7 other
O
57 126
Fit/Tube
7
Attachment
45 (34.5) 63
A□W (Pipe adaptor set) Nozzle
Air Unit
P
55
45

32.5
2.5

PrecsCompn
IN OUT Enlarged view of
Electro
bracket section Press SW
Port size ContactSW
60
70

Rc1/4(8)
Attachment AirSens
Rc3/8(10)
(pressure gauge)
PresSW
With PPR
Cool
148

option Air Flo

Sens/Ctrl
Bore size
ø5.7 to ø6 WaterRtSens
Soft nylon TotAirSys
tube (Total Air)
Bore size ø5 TotAirSys
Soft vinyl tube (Gamma)
Pressure gauge attached optional dimensions table Gas
Drain outlet
60

Pressure gauge O P generator

Maintenance dimensions
G45P (70) ø39 RefrDry
G49P (69.5) ø43.5
DesicDry
G59P (72) ø52
G40P (71.5) ø42.5
HiPolymDry
●R
 efer to page 124 for the optional dimensions of the metal bowl. G52P (82) ø52.5 MainFiltr
R2 (69.5) □30 Dischrg
etc

Ending
69
 R.M. Combination
F.R.L. Dimensions
F.R. ● C4050-W
F (Filtr) 200
Rc3/4:210
R (Reg) O 14
7
62 160
L (Lub) Attachment

7
55 (42.5) 80
Drain A□W (Pipe adaptor set)
Separ
Mech
P

Press SW
55
45

2.5

Res press
35

exh valve IN OUT Enlarged view of

SlowStart bracket section
Anti-bac/Bac- Port size
60
70

remove Filt Rc1/4(8)

Film Attachment
Rc3/8(10)
Resist FR (pressure gauge)
Rc1/2(15)
Oil-ProhR With PPR Rc3/4(20)
171

option
Med
Press FR Bore size
No Cu/ ø5.7 to ø6
PTFE FRL Soft nylon
Outdrs FRL tube
Bore size ø5
Adapter Pressure gauge attached optional dimensions table
Joiner Soft vinyl tube
260

Press Drain outlet Pressure gauge O P

Gauge G45P (75) ø39
CompFRL Maintenance dimensions G49P (74.5) ø43.5
LgFRL G59P (77) ø52
G40P (76.5) ø42.5
PrecsR
G52P (86) ø52.5
VacF/R R2 (75) □30
Clean FR ● R
 efer to page 124 for the optional dimensions of the metal bowl.
ElecPneuR
AirBoost
Speed Ctrl ● C6050-W
Silncr
CheckV/ 250 20
other Rc1 1/4:256 8
14
Fit/Tube 180
65 O 90
Nozzle 67
45
15

Air Unit
9
65

Attachment
50

A□W (Pipe adaptor set)

40

PrecsCompn Enlarged view of

.4 .6
OUT
P

.2 .8

Electro 0
ＭＰａ
1.0

bracket section
IN
Press SW
70

ContactSW Port size

85

Attachment Rc3/4(20)
AirSens (pressure gauge) Rc1(25)
PresSW With PPR
210

Cool option
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
Bore size ø5.7 to ø6
(Gamma)
Gas Soft nylon tube Pressure gauge attached optional dimensions table
60

generator Bore size ø5 Maintenance dimensions

Soft vinyl tube Pressure gauge O P
RefrDry Drain outlet G45P (80) ø39
DesicDry G49P (79.5) ø43.5
G59P (82) ø52
HiPolymDry
G40P (81.5) ø42.5
MainFiltr G52P (93) ø52.5
Dischrg R2 (80) □30
etc

Ending
70
 R.M. Combination
Dimensions
Dimensions F.R.L.
● C8050-W F.R.
F (Filtr)
270
Rc1 1/4:276
R (Reg)
O
20
72 200 Attachment L (Lub)
65 50 100 A□W (Pipe adaptor set) 14
8 Drain

15
Separ
Mech
65

Press SW
P
50

40

9
Res press
IN OUT
exh valve
SlowStart
70
85

Anti-bac/Bac-
Enlarged view of remove Filt
Attachment
bracket section Film
(pressure gauge)
Port size Resist FR
With PPR
option Rc3/4(20) Oil-ProhR
303

Rc1(25) Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Bore size
ø5.7 to ø6 Pressure gauge attached optional dimensions table Adapter
Joiner
Soft nylon
Pressure gauge O P Press
tube Gauge
Bore size ø5 G45P (85) ø39
Soft vinyl tube G49P (84.5) ø43.5 CompFRL
200

Drain outlet
Maintenance dimensions G59P (87) ø52 LgFRL
G40P (86.5) ø42.5
PrecsR
G52P (98) ø52.5
R2 (85) □30 VacF/R
●R
 efer to page 124 for the optional dimensions of the metal bowl.
Clean FR
ElecPneuR
AirBoost
Speed Ctrl
Silncr
CheckV/
other
Fit/Tube
Nozzle
Air Unit
PrecsCompn
Electro
Press SW
ContactSW
AirSens
PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
71
 F.M. combination Standard White Series
C1060/C2060/C3060/
F.R.L. C4060/C6060/C8060-W Series
F.R. Filter and oil mist filter integrated.
F (Filtr)
● Port size: 1/8 to 1
JIS symbol
R (Reg)
L (Lub)
Drain
Separ
Mech
Specifications
Press SW Item C1060-W C2060-W C3060-W C4060-W C6060-W C8060-W
Res press
exh valve
SlowStart
Anti-bac/Bac-
remove Filt
Film
Resist FR
Appearance
Oil-ProhR
Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Adapter Filter F1000-W F2000-W F3000-W F4000-W F6000-W F8000-W
Joiner Comps
Press Oil mist filter M1000-W M2000-W M3000-W M4000-W M6000-W M8000-W
Gauge Working fluid Compressed air
CompFRL Max. working pressure MPa 1.0 (≈150 psi, 10 bar) *3, 4, 5
LgFRL Proof pressure MPa 1.5 (≈220 psi, 15 bar) *3
Ambient / fluid temperatures °C 5 (41°F) to 60 (140°F)
PrecsR
Port size Rc,NPT,G 1/8, 1/4 (3/8 uses an adaptor) 1/4, 3/8 (1/2 uses an adaptor) 1/4, 3/8 (1/2 uses an adaptor) 1/4, 3/8, 1/2 (3/4 uses an adaptor) 3/4, 1 (1 1/4 uses an adaptor) 3/4, 1 (1 1/4 uses an adaptor)
VacF/R Weight kg 0.22 0.58 0.62 1.06 2.02 2.68
Clean FR Secondary oil concentration 0.01 mg/m3 or less (0.1 mg/m3 or less after oil saturation)
ElecPneuR Max. flow rate (*1, *2) m /min
3
0.15 *3 0.25 0.36 0.825 1.27 2.6
*1: The max. flow is for a primary pressure of 0.7 MPa.
AirBoost
*2: When element option “Y” is selected, refer to page 108 for max. flow rate. The working flow must be less than the max. working flow.
Speed Ctrl *3: When “F1” with auto-drain is selected, the NC auto-drain is provided with both the filter and oil mist filter. The min. working pressure is 0.2
MPa, the max. working pressure is 0.7 MPa and the proof pressure is 1.05 MPa. For the max. working flow rate, refer to the max. working
Silncr processing flow rate table of M1000-W-F1 with auto-drain (page 119). The working flow must be less than the max. working flow.
CheckV/ *4: In the case of “F” with auto-drain, the supply air pressure is 0.15 MPa or more. For the air filter auto-drain, air is purged with the initial drainage until pressure
other reaches 0.1 MPa.
*5: In the case of “F1” with auto-drain, the required supply air pressure is 0.15 MPa or more.
Fit/Tube *6: Refer to page 116 for details on other oil mist filters.
Nozzle
Air Unit Option weight
PrecsCompn * Add to the weight of the standard accessories. Unit: kg
Electro Drain discharge Bowl material Pipe adaptor set
Press SW Code
F F1 FF FF1 M M1 A6*W A8*W A10*W A15*W A20*W A25*W A32*W
ContactSW
C1060 0.014 0.09 0.09 0.09
AirSens C2060 0.04 0.2 0.16 0.16 0.16
PresSW
Cool C3060 0.04 0.04 0.2 0.2 0.16 0.16 0.16
Air Flo C4060 0.04 0.04 0.2 0.2 0.16 0.16 0.16
Sens/Ctrl
C6060 0.04 0.04 0.2 0.2 0.53 0.53 0.53
WaterRtSens
C8060 0.04 0.04 0.04 0.04 0.2 0.2 0.53 0.53 0.53
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
72
 F.M. Combination
How to order
How to order A Model No. F.R.L.
* ‌Refer to page 30 for the F.R.
C1060 6 W Z A6W explanation of the option.
F (Filtr)

C1060
C2060
C3060
C4060
C6060
C8060
R (Reg)
Code Description
L (Lub)
A Model No. B Port size
B Port size Drain
6 1/8 ● Separ
8 1/4 ● ● ● ● Mech
Press SW
10 3/8 ● ● ● Res press
exh valve
15 1/2 ●
SlowStart
20 3/4 ● *1 ● ●
Anti-bac/Bac-
25 1 ● ● remove Filt
Film
C Port thread *2 Resist FR
C Port thread
Blank Rc thread ● ● ● ● ● ● Oil-ProhR
N NPT thread ● ● ● ● ● ● Med
Press FR
G G thread ● ● ● ● ● ● No Cu/
PTFE FRL
D Option *3
D Option Outdrs FRL
Blank With manual drain cock ● ● ● ● ● ●
Adapter
F Auto-drain, man OVRD (NO: no press→Exhaust) ● ● ● ● Joiner
Drain
discharge F1 Auto-drain, man OVRD (NC: no press→no exhaust) ● ● ● ● ● ● Press
Gauge
FF Large auto-drain, man OVRD (NO: no press→Exhaust) ●
*4, CompFRL
*5 FF1 Large auto-drain, man OVRD (NC: no press→no exhaust) ●
● ● ● ● ● ●
LgFRL
Blank Polycarbonate bowl
Bowl Z Nylon bowl ● ● ● ● ● ● PrecsR
material M Metal bowl ● ● ● ● VacF/R
M1 Metal bowl with manual drain cock ● ● ● ● ●
Clean FR
Blank 5 μm ● ● ● ● ● ●
Element ElecPneuR
Y 0.3 μm (submicron) *6 ● ● ● ●
Diff press Blank Without differential pressure detection port ● ● ● ● ● ● AirBoost
E Display unit
detect Q With differential pressure detection port (Rc 1/4) ● ● Speed Ctrl
Flow Blank Standard flow (left → right) ● ● ● ● ● ●
Pipe adaptor set Silncr
Reverse flow (right → left)
F
direction X1 ● ● ● ● ● ●
(included) CheckV/
other
E Display unit
Precautions for model No. selection Blank MPa display (Rc thread), psi display (NPT thread), bar display (G thread) ● ● ● ● ● ●
Fit/Tube
*1: Pipe adaptor A400-20*-W is assembled on both ends of J1 MPa display (NPT, G thread) ● ● ● ● ● ● Nozzle
C4060-20*-W. A20*W does not need to be selected for the pipe
adaptor set.
F Pipe adaptor set (included) Page 350 *7 Air Unit
*2: G threads and NPT threads are available for IN, OUT and drain Blank Not included ● ● ● ● ● ● PrecsCompn
outlet (metal bowl with auto-drain).
A6*W 1/8 pipe adaptor set ● Electro
*3: Select options for the drainage, bowl material, element and
Press SW
differential pressure detection. When selecting options for several A8*W 1/4 pipe adaptor set ● ● ● ●
items, list options in order from the top. A10*W 3/8 pipe adaptor set ● ● ● ●
ContactSW
*4: Refer to page 354 for the auto-drain usage conditions.
*5: When option code “F” is selected, the NO auto-drain is supplied A15*W 1/2 pipe adaptor set ● ● ● AirSens
with the air filter and the NC auto-drain is supplied with the oil A20*W 3/4 pipe adaptor set ● ● PresSW
mist filter. When option code “F1” is selected, the NC auto-drain Cool
A25*W 1 pipe adaptor set ● ● Air Flo
is included with the air filter and oil mist filter. For “FF” and “FF1”,
Sens/Ctrl
only the filter has a large discharge rate. The oil mist filter is A32*W 1 1/4 pipe adaptor set ● ●
normal NC auto-drain.
* Adaptor thread
WaterRtSens
*6: Refer to page 108 for max. processing flow rate when TotAirSys
option “Y” is selected. Blank Rc thread ● ● ● ● ● ● (Total Air)
*7: The joiner set is enclosed with the pipe adaptor set. N NPT thread ● ● ● ● ● ● TotAirSys
(Gamma)
G G thread ● ● ● ● ● ● Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
73
 F.M. Combination
F.R.L. Dimensions
F.R. ● C1060-W
F (Filtr)
R (Reg)
123
L (Lub) 80
Drain 40 21.5 40 11
Attachment 7.5
Separ
A□W (Pipe adaptor set) 7.5
Mech

5.5
Press SW
Res press
45

10
exh valve
35

SlowStart
18

IN OUT
Anti-bac/Bac-
remove Filt
Film Enlarged view of
45

Resist FR
55

Port size bracket section

Oil-ProhR Rc1/8(6)
Rc1/4(8)
· Optional dimensions
Med
98

Press FR With auto-drain (F1)

No Cu/
PTFE FRL Tube center
Outdrs FRL
Adapter Bore size ø4
Joiner Soft nylon
60

tube

92
Press
Gauge Drain outlet Maintenance dimensions

CompFRL
LgFRL
PrecsR M5
Drain outlet
VacF/R
Clean FR
ElecPneuR
AirBoost ● C2060-W
Speed Ctrl
Silncr 140
CheckV/
other 45 (28) 100
Fit/Tube
7 50
Attachment
Nozzle (Pipe adaptor set)
Air Unit
PrecsCompn
55

45

Electro
Press SW IN OUT

ContactSW Port size

Rc1/4(8)
AirSens
60

Rc3/8(10)
70

PresSW
Cool
Air Flo
Sens/Ctrl
147

WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
Maintenance
dimensions

Bore size ø5.7 to ø6

Soft nylon tube
DesicDry
60

Bore size ø5
Soft vinyl tube
HiPolymDry
Drain outlet
MainFiltr
Dischrg
etc

Ending
74
 F.M. Combination
Dimensions
Dimensions F.R.L.
● C3060-W F.R.
F (Filtr)
R (Reg)
166
Attachment
L (Lub)
126
A□W (Pipe adaptor set) 14 Drain
45 (34.5) 63 7
Separ
Mech

7
Press SW
Res press
55

exh valve
45

22.5

IN OUT SlowStart
Anti-bac/Bac-
Enlarged view of remove Filt
60
70

Film
bracket section
Resist FR
Port size
Rc1/4(8) Oil-ProhR
148

Rc3/8(10) Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Bore size
ø5.7 to ø6
Adapter
Joiner
Soft nylon tube
Press
60

Bore size ø5 Gauge

Soft vinyl tube
Drain outlet Maintenance dimensions
CompFRL
LgFRL
PrecsR
●R
 efer to page 113 for the dimensions of the metal bowl option filter and VacF/R
page 124 for the oil mist filter.
Clean FR
ElecPneuR
AirBoost
● C4060-W
Speed Ctrl
14
7
Silncr
200 CheckV/
Rc3/4:210
7 other

160 Attachment Fit/Tube

A□W (Pipe adaptor set)
55 (42.5) 80 Nozzle
Air Unit
Enlarged view of
55

PrecsCompn
45

bracket section
22.5

IN OUT Electro
Press SW
ContactSW
60
70

AirSens
Port size
PresSW
Rc1/4(8)
171

Cool
Rc3/8(10) Air Flo
Rc1/2(15) Sens/Ctrl
Rc3/4(20)
WaterRtSens
TotAirSys
(Total Air)
Bore size TotAirSys
ø5.7 to ø6 (Gamma)
Gas
60

Soft nylon tube

generator
Bore size ø5
Soft vinyl tube Maintenance dimensions RefrDry
Drain outlet
DesicDry
HiPolymDry
● Refer to page 113 for the dimensions of the metal bowl option filter and MainFiltr
page 124 for the oil mist filter. Dischrg
etc

Ending
75
 F.M. Combination
F.R.L. Dimensions
F.R. ● C6060-W
F (Filtr)
R (Reg)
L (Lub) 250 20
Rc1 1/4:256
Drain 14 8
Separ 180
Mech 65 42.5 90
Press SW Attachment
Res press A□W (Pipe adaptor set)

15
exh valve

9
65
50

SlowStart
33
Dimensions of bracket section
OUT
Anti-bac/Bac-
IN
remove Filt
Film
70
85

Resist FR Port size

Rc3/4(20)
Oil-ProhR Rc1(25)
210

Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL Bore size ø5.7 to ø6
Soft nylon tube
Adapter
Bore size ø5
Joiner
Press Soft vinyl tube
60

Gauge Drain outlet

Maintenance dimensions
CompFRL
LgFRL
PrecsR
●R
 efer to page 113 for the dimensions of the metal bowl option filter and
VacF/R page 124 for the oil mist filter.
Clean FR
ElecPneuR
AirBoost ● C8060-W
Speed Ctrl
Silncr 270
Rc1 1/4:276 20
CheckV/ Attachment
other 200 A□W (Pipe adaptor set) 14
8
Fit/Tube
15
65 50 100

Nozzle
9
65
50

Air Unit
33

IN OUT
PrecsCompn
70

Electro Enlarged view of

85

Press SW
bracket section
ContactSW
Port size
AirSens Rc3/4(20)
Rc1(25)
303

PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
Bore size
TotAirSys ø5.7 to ø6
(Total Air)
Soft nylon tube
TotAirSys
Bore size ø5
(Gamma)
Gas Soft vinyl tube
200

generator Drain outlet

RefrDry Maintenance dimensions
DesicDry
HiPolymDry
●R
 efer to page 113 for the dimensions of the metal bowl option filter and
MainFiltr page 124 for the oil mist filter.
Dischrg
etc

Ending
76
MEMO
F.R.L.
F.R.
F (Filtr)
R (Reg)
L (Lub)
Drain
Separ
Mech
Press SW
Res press
exh valve
SlowStart
Anti-bac/Bac-
remove Filt
Film
Resist FR
Oil-ProhR
Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Adapter
Joiner
Press
Gauge
CompFRL
LgFRL
PrecsR
VacF/R
Clean FR
ElecPneuR
AirBoost
Speed Ctrl
Silncr
CheckV/
other
Fit/Tube
Nozzle
Air Unit
PrecsCompn
Electro
Press SW
ContactSW
AirSens
PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
77
 F.F.M. combination Standard White Series

F.R.L.
C3070/C4070/C6070/C8070-W Series
5μm filter, 0.3μm filter and oil mist filter integrated.
F.R.
● Port size: 1/4 to 1
F (Filtr)
JIS symbol
R (Reg)
L (Lub)
Drain
Separ
Mech
Specifications
Press SW Item C3070-W C4070-W C6070-W C8070-W
Res press
exh valve
SlowStart
Anti-bac/Bac-
remove Filt
Film
Resist FR
Appearance
Oil-ProhR
Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Adapter Filter (5 μm) F3000-W F4000-W F6000-W F8000-W
Joiner
Press Comps Filter (0.3 μm) F3000-W F4000-W F6000-W F8000-W
Gauge Oil mist filter M3000-W M4000-W M6000-W M8000-W
CompFRL Working fluid Compressed air
LgFRL Max. working pressure MPa 1.0 (≈150 psi, 10 bar) *2, 3
Proof pressure MPa 1.5 (≈220 psi, 15 bar)
PrecsR
Ambient / fluid temperatures °C 5 (41°F) to 60 (140°F)
VacF/R Port size Rc,NPT,G 1/4, 3/8 (1/2 uses an adaptor) 1/4, 3/8, 1/2 (3/4 uses an adaptor) 3/4, 1 (1 1/4 uses an adaptor) 3/4, 1 (1 1/4 uses an adaptor)
Clean FR Weight kg 0.96 1.61 3.09 4.01
3 3
ElecPneuR Secondary oil concentration 0.01 mg/m or less (0.1 mg/m or less after oil saturation)
Max. flow rate (*1) m3/min 0.23 0.5 0.8 1.1
AirBoost
*1: The max. flow is for a primary pressure of 0.7 MPa.
Speed Ctrl *2: In the case of “F” with auto-drain, the supply air pressure is 0.15 MPa or more. For the air filter auto-drain, air is purged with the initial drainage until pressure
reaches 0.1 MPa.
Silncr *3: In the case of “F1” with auto-drain, the required supply air pressure is 0.15 MPa or more.
CheckV/ *4: Refer to page 116 for details on other oil mist filters.
other
Fit/Tube
Nozzle Option weight
* Add to the weight of the standard accessories. Unit: kg
Air Unit
Drain discharge Bowl material Pipe adaptor set
PrecsCompn Code F F1 FF FF1 M M1 A8*W A10*W A15*W A20*W A25*W A32*W
Electro
Press SW C3070 0.06 0.06 0.3 0.3 0.16 0.16 0.16
ContactSW C4070 0.06 0.06 0.3 0.3 0.16 0.16 0.16 0.16
C6070 0.06 0.06 0.3 0.3 0.53 0.53 0.53
AirSens
C8070 0.06 0.06 0.06 0.06 0.3 0.3 0.53 0.53 0.53
PresSW
Cool
Air Flo
Sens/Ctrl
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
78
 F.F.M. Combination
How to order
How to order A Model No. F.R.L.
* ‌Refer to page 30 for the F.R.
C3070 6 W Z A6W explanation of the option.

C3070
C4070
C6070
C8070
F (Filtr)
Code Description R (Reg)
B Port size
A Model No. B Port size L (Lub)
8 1/4 ● ●
Drain
10 3/8 ● ● Separ
Mech
15 1/2 ● Press SW
20 3/4 ● *1 ● ● Res press
exh valve
25 1 ● ●
SlowStart
C Port thread *2 Anti-bac/Bac-
C Port thread
Blank Rc thread ● ● ● ● remove Filt
Film
N NPT thread ● ● ● ● Resist FR
G G thread ● ● ● ● Oil-ProhR
Med
D Option *3 Press FR
D Option
Blank With manual drain cock ● ● ● ● No Cu/
PTFE FRL
F Auto-drain, man OVRD (NO: no press→Exhaust) ● ● ● ●
Drain Outdrs FRL
F1 Auto-drain, man OVRD (NC: no press→no exhaust) ● ● ● ●
discharge Adapter
FF Large auto-drain, man OVRD (NO: no press→Exhaust) ● Joiner
*4, Press
*5 FF1 Large auto-drain, man OVRD (NC: no press→no exhaust) ●
Gauge
Blank Polycarbonate bowl ● ● ● ●
CompFRL
Bowl Z Nylon bowl ● ● ● ●
LgFRL
material M Metal bowl ● ● ● ●
M1 Metal bowl with manual drain cock ● ● ● ● PrecsR
Diff press Blank Without differential pressure detection port ● ● ● ● VacF/R
detect Q With differential pressure detection port (Rc 1/4) ● ●
Clean FR
Flow Blank Standard flow (left → right) ● ● ● ●
ElecPneuR
direction X1 Reverse flow (right → left) ● ● ● ●
AirBoost
E Display unit
E Display unit Speed Ctrl
Blank MPa display (Rc thread), psi display (NPT thread), bar display (G thread) ● ● ● ●
J1 MPa display (NPT, G thread) ● ● ● ● Silncr
CheckV/
F Pipe adaptor set (included) Page 350 *6 other
F Pipe adaptor set
Blank Not included ● ● ● ●
(included) Fit/Tube
A8*W 1/4 pipe adaptor set ● ●
Nozzle
A10*W 3/8 pipe adaptor set ● ●
Precautions for model No. selection Air Unit
A15*W 1/2 pipe adaptor set ● ●
*1: Pipe adaptor A400-20*-W is assembled on both ends of
C4070-20*-W. A20*W does not need to be selected for the pipe A20*W 3/4 pipe adaptor set ● ● ● PrecsCompn
adaptor set. A25*W 1 pipe adaptor set ● ● Electro
*2: G threads and NPT threads are available for IN, OUT and drain Press SW
A32*W 1 1/4 pipe adaptor set ● ●
outlet (metal bowl with auto-drain).
ContactSW
*3: Select options for the drainage, bowl material, element and * Adaptor thread
differential pressure detection. When selecting options for several AirSens
Blank Rc thread ● ● ● ●
items, list options in order from the top.
PresSW
*4: Refer to page 354 for the auto-drain usage conditions. N NPT thread ● ● ● ●
Cool
*5: When option code “F” is selected, the NO auto-drain is supplied G G thread ● ● ● ● Air Flo
with the air filter and the NC auto-drain is supplied with the oil Sens/Ctrl
mist filter. When option code “F1” is selected, the NC auto-drain
is included with the air filter and oil mist filter. For “FF” and “FF1”,
WaterRtSens
only the filter has a large discharge rate. The oil mist filter is TotAirSys
normal NC auto-drain. (Total Air)
TotAirSys
*6: The joiner set is enclosed with the pipe adaptor set.
(Gamma)
Gas
generator
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc

Ending
79
 F.F.M. Combination
F.R.L. Dimensions
F.R. ● C3070-W
F (Filtr)
R (Reg)
229
L (Lub) 189 Attachment
Drain 45 (34.5) 63 63 A□W (Pipe adaptor set)
Separ 14
Mech 7
Press SW
55

7
45

Res press
22.5

exh valve IN OUT

SlowStart
Anti-bac/Bac-
60
70

remove Filt
Film Enlarged view of
148

Resist FR Port size bracket section

Oil-ProhR Rc1/4(8)
Rc3/8(10)
Med
Press FR Bore size
No Cu/ ø5.7 to ø6
PTFE FRL Soft nylon tube
Outdrs FRL Bore size ø5
60

Soft vinyl tube

Adapter
Joiner Drain outlet
Maintenance dimensions
Press
Gauge
CompFRL
LgFRL
PrecsR
●R
 efer to page 113 for the dimensions of the metal bowl option filter and
VacF/R page 124 for the oil mist filter.
Clean FR
ElecPneuR
AirBoost ● C4070-W
Speed Ctrl
Silncr
CheckV/ 280
other Rc3/4:290
Attachment 14
Fit/Tube 240 7
55 (42.5) 80 80 A□W (Pipe adaptor set)
7

Nozzle
Air Unit
55
45

22.5

PrecsCompn IN OUT
Electro
Press SW
Enlarged view of
60
70

ContactSW bracket section

AirSens
171

Port size
PresSW Rc1/4(8)
Cool Rc3/8(10)
Air Flo Rc1/2(15)
Sens/Ctrl Bore size Rc3/4(20)
WaterRtSens ø5.7 to ø6
Soft nylon tube
TotAirSys
Bore size ø5
60

(Total Air)
TotAirSys Soft vinyl tube
(Gamma) Drain outlet Maintenance dimensions
Gas
generator
RefrDry
DesicDry
HiPolymDry ● R
 efer to page 113 for the dimensions of the metal bowl option filter and
page 124 for the oil mist filter.
MainFiltr
Dischrg
etc

Ending
80
 F.F.M. Combination
Dimensions
Dimensions F.R.L.
● C6070-W F.R.
F (Filtr)
340 20 R (Reg)
Rc1 1/4:346 14 8
270
L (Lub)
90 90 Drain
65 42.5 Separ
Attachment Mech

15
9
A□W (Pipe adaptor set) Press SW
Dimensions of Res press
65
50

bracket section exh valve

33

OUT
SlowStart
IN
Anti-bac/Bac-
70

remove Filt
85

Port size Film

Rc3/4(20) Resist FR
Rc1(25)
210

Oil-ProhR
Med
Press FR
No Cu/
PTFE FRL
Outdrs FRL
Bore size ø5.7 to ø6
Soft nylon tube Adapter
Joiner
60

Bore size ø5
Soft vinyl tube
Press
Maintenance Gauge
Drain outlet dimensions
CompFRL
LgFRL
●R
 efer to page 113 for the dimensions of the metal bowl option filter and PrecsR
page 124 for the oil mist filter.
VacF/R
Clean FR
ElecPneuR
AirBoost
● C8070-W
Speed Ctrl
Silncr
CheckV/
other
Fit/Tube
370
Rc1 1/4:376 20
Nozzle
300 Attachment 14
A□W (Pipe adaptor set) 8 Air Unit
15

65 50 100 100

PrecsCompn
9
65

Electro
50

33

IN OUT Press SW
ContactSW
70
85

Enlarged view of AirSens

bracket section PresSW
Port size Cool
Air Flo
Rc3/4(20)
Sens/Ctrl
Rc1(25)
303

WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
Bore size Gas
ø5.7 to ø6 generator
Soft nylon tube
Bore size ø5 RefrDry
200

Soft vinyl tube

DesicDry
Drain outlet
Maintenance dimensions
HiPolymDry
MainFiltr
Dischrg
●R
 efer to page 113 for the dimensions of the metal bowl option filter and etc
page 124 for the oil mist filter.
Ending
81