MotionCam Outdoor

HighMount (PhOD) Jeweller

Wireless IR motion detector that takes


on-demand photos and photos by alarm,

schedule, and scenario. For outdoor installation

at a 2–4 m height from the ground IP 55

The features and specifications mentioned in this

document are subject to change prior to the official

release of the device.

Advanced detection Eliminating false alarms

Two infrared (IR) sensors and one microwave sensor IR sensors alarm verification via a Ka-band microwave senso

Adjustable motion detection range using the angle moun Three sensitivity levels adjustable through the Ajax ap

85° vertical viewing angle with no blind spots under
 Correlation and spectral analysis to prevent false alarms

the detecto
Effective motion detection with temperature compensation

115° horizontal viewing angle from –25 °C to +60 °C

Photo verification

MotionCam Outdoor HighMount (PhOD) Jeweller has a built-in camera to quickly assess the situation at the protected facility.


There are four types of photo verification available: by alarm, by scenario, by schedule, and on demand. The user can request


and view photos with a single click in the Ajax app.

HDR camera for clear photos IR backlight for low light conditions

Up to 640 × 480 pixels photo resolution Up to 5 photos in a series

Photo by Alarm Photo on Demand

The built-in camera is activated when the detector is armed and motion The user can take photos at any time or when the detector

is detected. Only users with access to the hub event feed and security is armed (depending on the settings). Photos on demand are not sent
company employees can view the photos. to the security company’s monitoring station.

Photo by Scenario Photo by Schedule

The detector’s camera automatically takes photos when specified The detector automatically takes photos at a specified time.
devices are triggered.
 Jeweller and Wings

wireless communication
Sabotage protection

Up to 1,700 m of wireless communication range


Anti-masking system that meets Grade 2 requirements
in an open spac

Tamper alarm and built-in accelerometer notify of attempts


Block cipher encryption for advanced data protectio
to dismantle the devic

Regular polling to display the current device state in app

Protection against spoofing with device authenticatio

Frequency hopping to prevent interception and jamming

Protection against unauthorized changes to the detector

position

Privacy controls Hassle-free installation

Precise configuration of access rights in the Ajax ap Pairing with the hub by scanning the QR cod

Graphic data is encrypted and meets GDPR requirement Remote control and configuration in Ajax apps

Event log stores all actions within the system Up to 3 years of calculated battery lif

No need to disassemble the enclosure during installation

Superior, Fibra, and Baseline product lines are mutually compatible. This opens up numerous possibilities for building

systems of any configuration.

Compliance with standards Communication with a hub Motion detection Enclosure

ge extender
r

or ran
EN 50131 (Grade 2)
Sensiti ve elements
Colo

PD 6662:2017 Jeweller and Wings 2 × PIR sensor

whit e

gies

Radar



D
communication technolo

Compatibilit y s

imension

Communication ran ge
Motion detection distance
224 × 137 × 98 mm

Hubs
up to 1,700 m
up to 15 m

(without angle mount)

Hub 2 (2G) Jeweller

In an open space

Hub 2 (4G) Jeweller

Motion detection angles
Weight

Hub 2 Plus Jeweller

Frequency bands
vertical: 85°
460 g

Hub Hybrid (2G)

866.0–866.5 MHz
horizontal: 115°

(without angle mount)

Hub Hybrid (4G)

868.0–868.6 MHz
810 g

868.7–869.2 MHz
Photo resolution in pixels
(with angle mount)

Range extenders
905.0–926.5 MHz
640 × 480

ReX 2 Jeweller 915.85–926.5 MHz

320 × 240 Tamper alar m

921.0–922.0 MHz

Depends on the sales region Magnetometer

Power supply I nstallation Complete set

Batter y
O g temperature range

peratin MotionCam Outdoor


6 × CR123A
from –25 °C to +60 °C

HighMount (PhOD) Jeweller

(pre-installed)

6 × CR123A battery

O peratin g humidity
(pre-installed)

Calculated batter y life

up to 95%

Hoo d

up to 3 year s

 Angle moun t

Protection class
Installation kit

IP55

Quick start guide

Installation hei ght

2 –4 m

1 The anti-masking system is only available for IR sensors; it does not support masking detection for microwave sensors.

[email protected]

For detailed information, scan the QR code or follow the link :

@AjaxSystemsSupport_Bot

aja x.systems/support/devices/motioncam-outdoor-highmount-phod/
ajax.systems