SHREE GANESH Be aware from similar name.

TM

We do not have BRANCH.

Oldest, Experienced & Smartest Coaching Institute.

Name: Std.: 11th

Com/Sci
School: Sub.: Computer Mcqs

Our Address:
120-122, First Floor Only, Chaturbhai Complex 2, Opp.: Batra Hospital,
Near Essar Petrol Pump, Harni-Warsiya Ring Road, Vadodara.
Mohinder Sir : +91 97146 30799
www.jagruticlassesbaroda.webs.com & www.click2score.com
 Standard:-11 1.Introduction to Multimedia
(01) is an integral part of our life
a) Radio b) communication c) Television d) multimedia
(02) various meanse of communication are-
a) internet b) internet c) radio and television d) all of them
(03) one can visualize more about the fun you had if you send a .
a) video clip b) audio clip only c) letter d) all of them
(04) which of the following makes communication more effective?
a) multimedia b) database c) letter d) none of them
(05) from which two terms,the term communication has been coined?
a) multiple,media b) multi,media c) many,media d) more,media
(06) multimedia is combination of different media elements like:
a) text b) audio and video c) graphics d) all of them
(07) play a vital role in the development of media elements.
a) mobile b)newspaper c)computer d)Radio
(08) is used to communicate information to the user.
a) audio b)text c)video d)graphics
(09) The textual data for multimedia can be developed using any .
a) graphical program b)text editor c)photoshop d)none of them
(10) Which of the following is an example of word processor?
a) open office writer b)MS-Word c)(a) and (b) d)none of them
(11) The text can have-
a) type b)size c)color d)all of them
(12) A is family of characters or letters which have similar look.
a) Bold b)italics c)underline d)typeface
(13) Typefaces have different style and size known as .
a) Bold b)Font c)italics d)underline
(14) Which of the following is not as part of styles?
a) Bold b) underline c) italics d)Alignment
(15) Which of the following is the distance between the top of the bottom point?
a) size b)Height c)Width d)length
(16) Size is expressed in .
a) inch b)cms c)points d)mm
(17) In fomt ‘Times New Roman 14 points’,’Times New Roman’ is .
a) style b)point c)size d)characer
(18) In font ‘Times New Roman 14 points’, 14 points is .
a) style b)size c)Height d)width
(19) Typeface is categorized into .
a) serif,sans serif b)serif,sans c) serif,multi d)none of them
(20) is little decoration at the end of the character.
a) serif b) sans serif c)serif and sans serif d)none of them

11 EM Lesson 1 (Computer 1
 Jagruti Classes, 120-122, First Floor Only, Chaturbhai Complex 2, Opp.: Batra Hospital,
Near Essar Petrol Pump, Harni-Warsiya Ring Road, Vadodara. Mohinder Sir : +91 97146 30799

(21) Which of the following is an example of serif font?

a) Times b)century c)Bookman d)all of them

(22) Which of the following is example of sans serif?

a) Arial b)vernada c)Helvetica d)all of them
(23) In openoffice impress,what should be clicked to open drawind toolbox?
a) view->Toolbars->Drawing b) Toolbars -> Drawing -> view
c) view-> Drawing -> Toolbars d) show-> Drawing -> Toolbar
(24) In which toolbar,the ‘Fontwork Gallery’ icon available?
a) Drawing b)Formating c)Standard d)Gallery
(25) The digitized form of sound is called .
a) video b)audio c)Text d)document
(26) Which of the following are required for multimedia applications?
a) inbuit sound card b)speaker c)microphone d)all of them
(27) must be connected to the computer to record audio.
a) microphone b)speaker c)scanner d)web camera
(28) What must be selected to open ‘sound Recorder Application’?
a) Application->sound and video->sound Recorder b)Application->sound Record
c)Application->sound->sound Recorder d)Application->sound and
video
(29) Choose to run audio mixer.
a) file->open volume b)file->open volume control c)file->open d)file->open mixer
(30) Which of the following task cannot be done in sound file?
a) delete a part b)change the playback c)add echo d)none of them
(31) Which of the following is not an audio formats?
a).wav b).rm c).mpga d).rmp
(32) Which type of files contains music data?
a).midi b).ram c).mp3 d)none of them
(33) Which type of file is a combination of audio and video?
a).midi b).ram c).wma d).mpga
(34) What is the extension of waveform audio file?
a).rm b).wav c).rm d).mp3
(35) What is the extension of compressed audio format?
a).mp3 b).wav c).rm d).midi
(36) Which of the following is the most popular uncompressed sound format on the internet and supported by all
popular browsers?
a) ).wav b).mp3 c).rm d).midi
(37) What is the extension of compressed audio file with windows media compression?
a).midi b).rm c).wma d).wav
(38) Which of the following option available in record as drop down list?

11 EM Lesson 1 (Computer 2
 a) CD quality,Lossless b)CD quality,Lossy c)Voice d)all of them

11 EM Lesson 1 (Computer 3
(39) Which of the following is used to play back the recording?
a) control->play b)play->control c)play->Recording d)none of them
(40) To save the recording,choose .
a) File->save all b) File->save as c) File->store d) File->close
(41) What is important to discover the type of media file?
a) extension b)file name c)webpage d)none of them

(42) Photographs can be converted into digital form with the help of .
a) scanner b)paint c)printer d)none of them
(43) Computer store the pictures in the form of .
a) pixel b)character c)point d)picture
(44) Pixel maps also known as .
a) bitmap b)raster image c)(a)and(b) d)character map
(45) A is small dot on the screen.
a) point b)pixel c) )(a)and(b) d)none of them
(46) A pixel map is a matrix of dots.
a) one dimensional b)two dimensional c)three dimensional d)none of them
(47) A is a simple matrix of tiny dots which forms an image on the computer screen.
a) Bitmap b)pixelmap c)character map d)grapic
(48) Which form of image stores the images in the form of mathematical equations?
a) dot b)vector c)pixel d)point
(49) While enlarging the image, image will blur while image will not blur.
a) bitmap,vector b)vector,bitmap c)bitmap,dots d)none of them
(50) Which of the following file format is an example of bitmap image?
a) gif b)jpeg c)png d)all of them
(51) Which of the following file extension is used for uncompressed image file used to store bitmap digital images?
a).bmp b).jpeg c)psd d).tif
(52) Which type of image file is used to store graphics for web images and support up to 32-bit colors?
a)bitmap b)portable network graphics
c)photoshop document d)tagged image file format
(53) Which type of file is highly flexible and platform independent format?
a) Tagged image file format b)portable network graphic c)bitmap image d)photoshop document
(54) What is the extension at the image file used by digital cameras and supports upto 24-bit colors?
a).bmp b).jpeg c)psd d).tif
(55) GIF is stand for .
a) graphical interchange format b)graphical intercome format
c)graphics intercome format d)none of them
(56) What is the full form of PNG?
a) printer network graphics b)project network graphics
c)portable network graphics d)none of them
(57) JPEG stands for?

11 EM Lesson 1 (Computer 4
 a) joint photographic expert group b)joint photographic excellence group
c)joint picture expert group d)joint expert group
(58) Changes in the image can be done by using programs like-
a) Adobe photoshop b)GIMP c)paint d)all of them
(59) .tif stands for-
a) Tagged image File b)Tag image file c)Toggle image file d)none of them
(60) .psd file is created by-
a) Adobe photoshop b)Acrobat Reader c)Writer d)impress

(61) Which of the following is highly flexible and platform independent format?
a).tif b).psd c).png d).bmp
(62) The picture can be scanned and convert into _format for further use.
a) analog b)digital c)both (a) and (b) d)none of them
(63) The term refers to the sequence of natural scenes captured using analog or digital video capturing
device.
a) audio b)text c)video d)animation
(64) Which of the following are video capturing device?
a) web camera b)Digital camera c)mobile phones d)all of them
(65) is created from drawn pictures and video created using real time visuals.
a) Animation b)Transition c)Effects d)Audio
(66) The images are played one after the other to create a moving effect.
a) digital b)document c)both (a) and (b) d)none of them
(67) Which of following is an example of animation movie?
a) kung fu b)panda c)smurfs d)all of them
(68) In which animation,the visual change occurs on the X and Y axis of the screen?
a) 2D animation b)3D animation c)a and b d)none of them
(69) In Which of the following is an example of 2D animation software?
a) micromedia flash b)synfig studio c)pencil d)all of them
(70) In which animation,the visual change occurs along three axis namely X,Y and Z?
a) 2D animation b)3D animation c)a and b d)none them
(71) Which type of animation gives a realistic view of the image?
a) 2D animation b)3D animation c)a and b d)none of them
(72) Which of the following is an example of 3D-animation software?
a) maya b)Blender c)3D max d)all of them
(73) Which of the following steps is required to follow to start recording video in VLC media
player?
a) media->open capturing device b)media->start
c)media->start capture d)none of them
(74) Which check box should be checked to see what are recording in VLC player?
a) show the output b)display the output c)convert output d)none of them
(75) Which of the following in open source video recording software?
11 EM Lesson 1 (Computer 5
 a) VLC media player b)cheese webcame booth c)(a) and (b) both d)none of them
(76) Which type of file in developed by Microsoft to play videos in windows environment?
a) audio video interleave file b)quick time format file
c)real video format file d)adobe flash shockwavw file
(77) What is extension of audio video interleave file?
a).avi b).avif c).ave d)none of them
(78) MPEG stands for .
a) moving pictures expert group b)making pictures expert group
c) moving program expert group d)moving pictures entertainment group
(79) Wmv stands for .
a) windows moving video b)windows media video c)windows making video d)none of them

(80) is a compressed video format developed by microsoft for internet streaming applications.
a)windows media format file b)real video format file c)MPEG 4 video file d)moving pictures
expert group
(81) Which video format used for creating movies distributed over internet?
a)audio video interleave file b)MPEG4 video file
c)moving pictures expert group file d)none of them
(82) Which of the following file type developed by apple?
a).avi b).mpg c).mov d).swf

(83) Which of the following are created using Adobe flash software?
a).swf b).avi c).rm d).mov
(84) Which of the following support mp4 format?
a) flash player b)youtube c)HTML5 d)all of them
(85) For a multimedia presentation to be effective it should have .
a) maximum interactivity b)minimum interactivity c)both (a) and (b) d)none of them
(86) The user is given for skipping a portion of the presentation.
a) buttons b)hyperlinks c)(a) or (b) d)none of them
(87) Inline media objects are specified inside the program using a specific tag.
a) <inlinemedia> b) <inlinemediaobject> c) <inline> d) <inlineobject>
(88) are extra helper programs that can be easily installed and used as a part of the web
browser. a)Add-on b)plug-in c)install-in d)debin
(89) In which two categories multimedia in classified?
a) multi,media b)animated,non-animated
c)interactive,non-interactive d)none of them
(90) In which type of multimedia,the sequence and timing of media elements can be controlled by the user?
a) interactive b)non-interactive c)both (a) and (b) d)none of them
(91) Which type of communication is only one way communication?
a) television b)radio c)newspaper d)all off them

11 EM Lesson 1 (Computer 6
(92) The process originates from the source and is delivered to the mass audience is an example
of communication.
a) one way b)two way c)both (a) and (b) d)none of them
(93) In multimedia,the user does not remain passive but can control the elements which is an example of
communication.
a) one way b)two way c)both a and b d)none of them
(94) In multimedia,the user simply watches the media as it plays from beginning to the end.
a)interleave b)non- interleave c) both (a) and (b d)none of them
(95) A corporate presentation or a multimedia demo is an example of multimedia.
a interleave b) non- interleave c) both (a) and (b d)none of them
(96) All type of games,movies are example of multimedia where in the purpose is to entertain the user.
a) Entertainment b)Edutainment c) (a) and (b) d)game Zone
(97) All type of educational CD’s are example of multimedia.
a) Entertainment b) Edutainment c) (a) and (b) d)educational

(98) Multimedia is used to produce computer based training courses commonly known as .
a)CTB b)CBT c)BTC d)BAT
(99) A is an informal term used to describe combining education with entertainment,especially multimedia
entertainment.
a) entertainment b)edutainment c)internet d)multimedia
(100) A lets the user go through a series of presentations,animations,text about a particular topic along with
examples.
a) CTB b)CBA c)CBT d)BAT
(101) Medical trainers and doctors can practice surgery methods via before the actual surgery.
a)simulation b)speculation c)education d)none of them
(102) Two players in different countries can play a game sitting on their computer using software.
a)virtual Gaming b)MS-office c)HTML d)solitaire
(103) are also available online were videos related to particular news can be seen.
a)E-newspaper b)E-magazines c)both a ans b d)none of them
(104) means deciding the flow of multimedia project
a)scripting b)writing c)designing d)multiflow
(105) The decide how each screen should look like,which media elements are to be used and where to
place them on the screen.
a) writer b)designer c)programmer d)audiance
(106) After the collection and construction of media elements they are combined together into a final product
using software package like .
a) micromedia flash b)synfig c)Hypercard d)all of them
(107) After the storyboard,the designer is ready with the and starts creating the graphics and other
media elements to be used in the project.
a) prototype b)script type c)datatype d)none of them

11 EM Lesson 1 (Computer 7
 (108) Full form of MIDI
a)musical instrument data interface b) musical instrument digital interface
c) musical image digital interface d) musical instrument digital image
(109) What is data transfer known as?
a) commerce b) communication c) conversion d) Common
(110) Communication medium can be helpful for ……………..
a) to get knoeledge b) to get education c) both (a) and (b) d) none of these
(111) How many mediums are not enough to convey meaningful messages to variety of audiences?
a) one b) many c) Different d) variety of
(112) Using...............medium effect of communication can be increased.
a) one b) two c) three d) many
(113) Use of more than one medium is known as …………
a) multilevel b) multiwidth c) multimedia d) multiwork
(114) Combination of all media elements makes the communication more ……………..
a) structured b) understandable c) both (a) and (b) d) none of these
(115) Recently, in..............field, multimedia is used.
a) education,advertisement b) theatre, fashion
c) games, entertainment d) all of these
(116) How many elements are there in multimedia ?
a) 3 b) 4 c) 5 d) 6
(117) Computer running text, images,sound, video is known as..............computer.
a) desktop b) super c) multimedia d) main frame
(118) Multimedia can be defined as collection of...............elements.
a) text,images b) sound, audio c) animation d) all of these
(119) Inserting..............is a basic step to represent any subject in multimedia.
a) text b) images c) sound d) animation
(120) Proper use of............in multimedia presentation will help to communicate the idea and message to the
user.
a) animation b) text c) images d) video
(121) Text can be in..............form.
a) word b) lines c) paragraphs d) all of these
(122) To give special effects to fonts,............software is used.
a) text editor b) spread sheet c) graphical d) database
(123) In ‘India’ , ‘India’ and ‘India’.............is different
a) typeface b) size c) font d) all of these
(124)fonts are easy to read on a printed page.
a) serif b) sans serif c) Both (a) and (b) d) None of these
(125)type face is more useful for printed page.
a) serif b) sans serif c) Both (a) and (b) d) None of these
(126) If the large amount of written data is to read then..............typeface is used.
a) serif b) sans serif c) Both (a) and (b) d) None of these

11 EM Lesson 1 (Computer 8
 (127) In Sans serif the word sans is of..............language.
a) Greek b) Chinese c) French d) Sanskrit
(128) Sans means ……………
a) full b) without c) strong d) sanskrit
(129)is the fonts without decoration.
a) Serif b) Sans serif c) Both (a) and (b) d) None of these
(130)Type face is used for heading or titles.
a) serif b) sans serif c) Both (a) and (b) d) None of these
(131)type face is difficult to read due to less resolution of computer screen.
a) serif b) sans serif c) Both (a) and (b) d) None of these
(132) Text in multimedia is............from the text used in traditional pen and paper method.
a) same b) equal c) different d) none of these
(133) In................Method we convey the information using only text.
a) traditional b) multimedia c) different d) expression
(134) How should be the text in multimedia?
a) short b) To the point c) Attractive d) All of these
(135)Software of Open Office is used to create presentations.
a) writer b) Impress c) Draw d) Method
(136)is used to display fonts in attractive manner in Open office impress.
a) word art b) Text art c) Fontwork d) objectwork

(137) Multimedia presentation is based on …………..

a) text b) image c) sound d) video
(138) Using...........if the data is displayed, it is easy to understand.
a) text b) image c) sound d) none of these
(139) Images are of............types.
a) 2 b) 3 c) 4 d) 5
(140)Suggests the type of the picture.
a) Bitmap/Raster b) Vector c) Both (a) and (b) d) None of these
(141) Using.............Images can be converted into the digital form.
a) plotter b) Scanner c) web cameras d) PDAs
(142) Pixel stands for………….
a) picture Electron b) picture Element c) picture Electric d) picture Election
(143) Pixel contains values representing ………….
a) colour b) size c) mass d) weight
(144) On the screen both bitmap and graphics looks the ………….
a) different b) unique c) same d) none of these
(145) The image files are compressed to save.............Space.
a) memory b) picture c) computer d) disk
(146)Format use compression within itself.
a) gif b) jpeg c) png d) all of these

11 EM Lesson 1 (Computer 9
 (147) bmp stands for ……….
a) Bitmap b) Bitmapping c) Basemap d) Basicmap
(148)Format is used for web graphics with small images with text.
a) jpeg b) gif c) bmp d) tif
(149)is the improved form over gif.
a) tif b) gif c) bmp d) png
(150)Is the format used by digital cameras.
a) jpeg b) gif c) bmp d) tif
(151) Jpeg supports upto..............colors.
a) 8 bit b) 16 bit c) 24 bit d) 32 bit
(152) Psd stands for …………
a) photoshop document b) portable document
c) pagewise document d) printed document
(153)Button is used to start recording in sound recorder.

A) B) C) D)
(154)Button is used to stop recording in sound recorder.

A) B) C) D)
(155)button is used to listen to the recording in sound recorder.

A) B) C) D)
(156)button is used to stop recording VLC Media player.

A) B) C) D)

(157) ram stands for …………..

a) Real Audio Movie b) Real Audio Movable
c) Real Audio Metadata d) Real Audio Manufacture
(158) wma stands for …………
a) windows Movable Audio b) windows Multimedia Audio
c) windows Media Audio d) windows Manageable Audio
(159) Any static presentation becomes lively by adding ………….
a) video,animation b) audio,video c) text,graphics d) animation audio
(160)Is a visual change over time.
a) video b) Animation c) Multimedia d) Graphics
(161)Is the option to make animation in 2D.
a) Macromedia Flash b) synfig studio c) pencil d) All of these
(162)Software is used to record video in ubuntu software center
a) Synfig studio b) Cheese Webcam Booth c) Blender d) video Recorder
(163) avi stands for ………….
a) Audio Video Interleave b) Audio Video Interface
c) Audio Video Information d) Audio Video Input
11 EM Lesson 1 (Computer 1
 (164) WMV stands for
a) Window Media File b) Window Media Format
c) Window Media Form d) Window Media Folder

11 EM Lesson 1 (Computer 1
 Standard:-11 2.Animation Tool:synfig
(01) Which tool application program is needed to create multimedia presentation using building blocks?
a) multimedia authoring b)multimedia making c)multimedia activation d)none of them
(02)Authoring tools provide the important framework to organize and edit the multimedia elements like.
a)graphics b)sound,video c)animation d)all of them
(03) Into which,authoring tools are classified?
a) card or page tools b)icon or event based tools c)Time based tools d)all of them
(04) In which authoring tools the elements are organized as pages of a book or pile of cards?
a) Time based tools b) icon or event based tools c) card or page tools d)none of them
(05)Which of the following are examples of card based authoring tools?
a)Hypercard b)multimedia tool book c)both a and b d)none of them
(06)In which authoring tool,the elements are organized as objects in a structural framework or process?
a) card or page tools b) icon or event based tools c) Time based tools d) none of them
(07)Which of the following are examples of icon and event authoring tools?
a)authorware b)icon author c)both a and b d)none of them
(08)In which authoring tool,the elements are organized along a timeline?
a) card or page tools b) icon or event based tools c) Time based tools d) none of them
(09)Which authoring tool is useful when you want to give a message that has a beginning and an end?
a) card or page tools b) icon or event based tools c) Time based tools d) none of them
(10) The are displayed as per the time or location of the events.
a) Elements b) tags c) audio only d)none of them
(11) Which of the following are examples of time based authoring tools?
a) Synfig b) pencil c) flash and director d) all of them
(12) Which of the following is not an example of icon and event based tools?
a) Authorware b) iconauthor c) synfig d) none of them
(13) Pencil is animation software.
a) 2D b) 3D c) 4D d)5D
(14)Which 2D animation software helps to create traditional hand-drawn animation using both bitmap and vector
graphics?
a) Base b) pencil c) writer d) none of them
(15) Pencil software can be downloaded from website.
a) http://www.pencil.org b) http://www.animatedpencil.org
b) c) http://www.pencil-animation.com d) http://www.pencil-animation.org
(16) Pencil software is available for operating system.
a) Windows b) Linux c) MacOs X d)all of them
(17) From which website the software called “synfig studio” can be downloaded?
a) http://www.synfig.org b) http://www.synfigstudio.org
c) http://www.synfig.com d) http://www.synfigstudi.com
(18) Synfig studio is vectore animation software.
a) 2D b) 3D c) 4D d) 5D
(19) In which year,the 2D vectore animation software called synfig studio released?
a) 2003 b) 2004 c) 2005 d) 2006
(20)The term GPL stands for-
a) General public limited b) general public license
c) gateway public license d) getting private license
(21) Synfig studio is available for various operating system like .
a) Windows b) linux c) MacOs X d) all of them
(22) Which of the following is the first version of synfig studio?
a) 0.61.02 b) 0.61.03 c) 0.61.04 d) 0.61.05
(23) The latest version of synfig is .
a) 0.61.02 b) 0.61.03 c) 0.61.04 d) 0.63.05
(24) Synfig stores animation in file format.
a) XML b) ANI c) SYN d)none of them
(25)Gzip is type of software.
11 Eng. Med. Lesson 2 (Computer 1
 a) Graphical b) compression c) presentation d) spreadsheet
(26) Gzip stands for .
a) General zip b) GNU zip c) Gun zip d) none of them
(27) What are the steps to start synfig?
a) Applicstion->graphics->synfig b) Applicstion->synfig
c) Application->start->synfig d) none of them
(28) What are the steps to reset synfig studio windows to default window arrangements?
a) Toolbox->file menu->panels->arrange b) Toolbox->file menu->panels->reset
b) Toolbox->reset window d)none of them
(29) In synfig,the components in the user interface are-
a) Toolbox b) canvas c) panels d) all of them
(30) Which window contains system menu and tools to create and edit your artwork?
a) Toolbox b) canvas c) panels d) none of them
(31) Closing the toolbox the applications.
a) Exits b) shutting down computer c) starts d) none of them
(32) There will be toolbox for all open projects.
a) One b) two c) three d) four
(33) In synfig,toolbox helps us to-
a) Open an existing file b) create a new file c) save the file d) all of them
(34) The toolbox contains the general tools like .
a) Circle b) rectangle c) transform d) all of them
(35) Into how many areas or palette the toolbox window in separated?
a) Two b) three c) four d) five
(36)In synfig,which palette of toolbox window buttons for standard file operations like create a new file,open a
file,save ,undo and redo etc.?
a) Upper b) lowest c) middle d) none of them
(37)In synfig,which palette of toolbox window has the tools like circle,rectangle,transform and others for creating and
manipulating an object?
a) Upper b) lowest c) middle d) none of them
(38)With the help of which palette of toolbox window we can change foreground and background color,brush
size,opacity,etc?
a) upper b) lowest c) middle d) none of them
(39) which option of lowest palette creates the fill and the outline colors for the object?
a) Foreground and background color b) foreground color only
c) background color only d) none of them
(40) Which option of lowest palette sets the size of the line for new outline layers?
a) Brush size b) layer size c) blend method d) none of them
(41) Which option of lowest palette used by gradient layers as their fill?
a) Gradient b) gradient palette c) interpolation d) none of them
(42) Which option of lowest palette determines the manner in which the parameter changes?
a) Gradient b) interpolation c) interlocation d) none of them
(43) is the place where artwork and animation is created.
a) Toolbox b) paper c) canvas d) interpolation
(44) In synfig,what is the shape of caret?
a) Black square b) green triangle c) black triangle d) none of them
(45)The area with the grey check-board pattern is the area in which elements / layers are created and
manipulated.
a) Working b) presentation c) none workable d) waste
(46) The timeline appears only when you have duration in the settings dialog of the project.
a) Zero b) none-zero c) a or b d) none of them
(47)Clicking on button,the canvas window menu will pop up which allows access to most of the synfig features.
a) Caret b) file c) Help d) edit
(48) Synfig has different type of panels like-
a) Layers b) parameter c) history d) all of them

11 Eng. Med. Lesson 2 (Computer 2

 (49) contains tools and information about certain elements of project.
a) Panels b) toolbox c) canvas d) info box
(50) To make panel visible,select from the toolbox.
a) File->panels b) view-> panels c) show->panels d)toolbox->panels
(51) display the layers of working canvas.
a) Layer panel b) params panel c) history panel d) working panel
(52) panel shows the currently selected layer parameters.
a) Layers b) params c) history d) current
(53) When multiple layers are selected,only the parameters that are in the selected layers are displayed.
a) Different b) common c) a or b d) deleted
(54) panel shows options that are specific to the currently selected tool.
a) Layers b) params c) tool options d)history
(55) shows a thumbnail image of what the currently selected canvas looks like.
a) Layer panel b) param panel c) tool option panel d) navigator
(56) Which panel keeps the track of all the actions that are done while editing the file?
a) Params panel b) history panel c) navigator d) none of them
(57) In history panel,the column is used to disable specific actions without going through the entire action list.
a) Radio button b) drop down box c) check box d) combo box
(58) In panels,the two windows on the and to the right are customizable dock dialogs.
a) Top b) bottom c) left d) right
(59) Each dock dialog contains a set of panels which are arranged .
a) Horizontally b) vertically c) a or b d) cascade
(60) Some panels share the same space inside the dock dialog which can be switch between them by clicking on their
.
a) Window b) tab c) ctrl d) atl
(61) By dragging which tab one can rearrange the contents of duck dialogs?
a) Panel b) time c) image d) none of them
(62) Which of the following step is used to create a new file?
a) Select toolbox->new file b) select file->new file
b) c) Select toolbox->create file d) Select file->new canvas
(63) By selecting what,the properties dialog box can be opened?
a) Edit->caret->properties b) caret->properties c) caret->Edit->properties d) none of them
(64) Which three tools are there in properties dialog box?
a) image,time,other b) file,canvas,time
c) canvas,image,time d) image,time,description
(65) In properties dialog box,which tab is used to set the image size and image area?
a) Image b) time c) other d)drawing
(66) In properties dialog box,which tab is used for setting the start time,end time and frames per second?
a) Image b) time c) other d) drawing
(67) Synfig provides various to create and manipulate an object.
a) Tools b) menu c) color box d) form
(68) In synfig,under which panel tools are visible?
a) Tools option b) panel->Tools c) Tools->panel d) none of them
(69) In synfig,parameters are visible in the panel.
a) Tool panel b) parameter c) Toolbox d) none of them
(70) In synfig,which tool is used to create new circle layer?
a) Circle b) round c) ellipse d) none of them
(71) In synfig,important parameters of circle are-
a) Center b) radius c) a and b both d) none of them
(72) Using which panel the name of the circle layer can be changed?
a) Params b) Tool options c) navigator d) none of them
(73) If option is selected,then the circle object will be created with an outline.
a) Create outline Bline b) create outline
c) show outline d)show outline Bline

11 Eng. Med. Lesson 2 (Computer 3

 (74) Click on the transform tool to see the if not visible.
a) Circle b) dot c) ducks d) layer
(75) A is a handle that is used to control some parameter of a layer.
a) Hand b) duck c) layers d) params
(76) A circle will have ducks.
a) One b) two c) three d) four
(77) The two ducks of the circle controls the .
a) Position of center b) radius
c) a and b d) deletion of circle
(78) The green colour of the duck signifies a change in the .
a) Position of the object b) radius of the circle c) vertices d) curves
(79) The blue colour of the duck signifies a change in the .
a) Position of the object b) radius of the circle c) vertices d) curves
(80) The orange colour of the duck signifies a change in the of the object.
a) Position of the object b) radius of the circle c) vertices d) curves
(81) The yellow colour of the duck signifies a change in the of the object.
a) Position of the object b) radius of the circle c) curves d) vertices

(82)The dark blue colour of the duck signifies a change to the .

a) radius of the circle b) vertices c) curves d) angel in star
(83) the ducks can be turn the on/off by selecting the option present on the top of the window.
a) Toolbox b) canvas c) panel d) Duck
(84) A can be created using any number of points and then click on the first point to close it.
a) Ellipse b) circle c) star d) polygon
(85) Which tool is used to make objects with any number of points and curves?
a) Star b) polygon c) Bline d) rectangle
(86) Which of the following is the most common tool used to draw with the help of mouse?
a) Circle b) rectangle c) draw d) none of them
(87) Which tool changes the color of objects?
a) Change color b) fill c) object color d) none of them
(88) Which tool allows to select colors from the eyedrop tool?
a) Pick color b) eyedrop c) select color d) none of them
(89) Which tool is used to create smooth transitions between two or more colors in an object?
a) Eye drop b) fill c) Gradient d) smooth
(90) In sygfig, allows to set a name for the layer and choose the type of gradient.
a) Layer panel b) Tool option panel c) params panel d) navigator
(91) How many types of gradients are there in synfig?
a) One b) two c) three d) four
(92) Which of the following is not a type of gradient tool?
a) Linear and Radial b) conical c) spiral d) shade
(93) Which of the following is the type of gradient tool?
a) Radial b) conical c) spiral d) all of them
(94) In type of gradient, the gradient wil be created perpendicular to the line you drag out.
a) Linear b) Redial c) spiral d) conical
(95) Which type of gradient produces a simple transition in a straight line?
a) Linear b) Redial c) conical d) Redial
(96) The gradient can be edited by moving the in any direction using the normal tool.
a) Star point b) mid point c) end point d) any point
(97) Which type of gradient produces circular colours with the transition being at the center of those circles?
a) Linear b) Redial c) spiral d) conical
(98) Which type of gradient has the appearance of looking down a tip of a cone?
a) Linear b) Redial c) conical d) spiral
(99) In the gradient is along the circular are of the center and goes in all directions.
a) Linear b) Redial c) conical d) spiral

11 Eng. Med. Lesson 2 (Computer 4

 (100) In conical gradient,the adjusts the center of the gradient.
a) Star point b) end point c) center endpoint d) any point
(101) Which type of gradient produces a spiral gradient?
a) Linear b) Radial c) spiral d) conical
(102) In synfig, tool allows to enter text by creating a text layer.
a) Alphabet b) Text c) Data d) Alphanumeric
(103) Using which panel the entered text can be changed later on?
a) Parameter b) Layer c) Tool options d) History
(104) The tool options panel will allow to select-
a) The name for the new layer b) single or multi line editor for entering the text
c) orientation of the text d) all of them
(105) What is the default value for the orientation of the text?
a) (0.5, 0.5) b) (0.0, 0.0) c) (1,1) d) (0.75, 0.75)
(106) Which tool is used to get a closer or far away view of the objects in the working area?
a) Text b) close/Far c) zoom d) near
(107) The zooming the output results.
a) Delete b) change c) enlarge d) does not effect
(108) Which tool is used to increase or decrease the width of a line?
a) Length b) Breath c) width d) Radius
(109) Which tool acts like the way pencil is used to make a line thicker or eraser to make it thinner?
a) Zoom b) width c) Length d) Radius
(110) layer is selected to change the width on particular segment of a line.
a) Inline b) outline c) panel d) segment

(111) To decrease the width hold key while moving the cursor.
a) CAPS b) ALT c) SHIFT d) CTRL
(112) Which tool allows to select object objects and to move, rotet or scale the ducks?
a) Smooth move tool b) scale tool c) rotate tool d) move tool
(113) Which tool works just like transform tool,except when multiple ducks are selected?
a) Smooth move tool b) scale tool c) Rotate tool d) move tool
(114) Which of the following key combination is used to select multiple ducks?
a) Ctrl + A b) ctrl + S c) ctrl + D d) ctrl + M
(115) Which tools scale relative to the center of the selected group ?
a) Smooth move b) scale c) Rotate d) none of them
(116) In which tool,all the selected ducks will move rotating about the center of the selected group?
a) Smooth move b) scale c) Rotate d) none of them
(117) Which icon indicates normal tool?
a) b) c) d)
(118) Which icon indicates smooth move tool?
a) b) c) d)
(119) Which icon indicates scale tool?

a) b) c) d)
(120) Which icon indicates mirror tool?

a) b) c) d)
(121) Which icon indicates gradient tool?

a) b) c) d)
(122) Which icon indicates draw tool?

a) b) c) d)
(123) Which tool indicates width tool?
11 Eng. Med. Lesson 2 (Computer 5
 a) b) c) d)
(124) Which icon indicates fill tool?

a) b) c) d)
(125) Which tool indicates eyedrop tool?

a) b) c) d)
(126) Which of following is children tool?

a) b) c) d)
(127) Which of following is a navigator tool?

a) b) c) d)
(128) Which of following is palette Editor tool?

a) b) c) d)
(129) Which of following is canvas Browser tool?

a) b) c) d)
(130) Which of following is Render setting tool?

a) b) c) d)
(131) The authoring tools are classified into...............categories.
a) 2 b) 3 c) 4 d) 5
(132) In icon and event based tool, we need to build the.............Of the events or tasks and then add the elements as
per the structure.
a) program b) function c) flowchart d) algorithm

(133)authoring tools are the most popular amongst all.

a) Card or page based tools b) Icon and event based authoring tools
c) Time based authoring tools d) all of these
(134)types of multimedia tools are available in the market.
a) proprietary b) open source c) Both (a) and (b) d) none of these
(135) Pencil can be downloaded in............way.
a) free b) payable c) partly payable d) all of these
(136) In pencil animation software, you can create good animation if you are good at ………..
a) element drawing b) free hand drawing c) object drawing d) pen drawing
(137) Synfig is............type of an authoring tool.
a) Card or page based tools b) Icon and event based authoring tools
c) Time based authoring tools d) all of these
(138) Synfig is............type of tool
a) proprietary b) open source c) Both (a) and (b) d) none of these
(139) How the synfig software can be downloaded from internet?
a) free b) payable c) partly payable d) All of these
(140) Synfig software was released in 2005 under the ………….
a) GNU GLP b) GNU GPL c) GUN GLP d) GUN GPL
(141)Type of animation is used in synfig.
a) 1D b) 2D c) 3D d) all of these
(142)is designed to produce film-quality animation with fewer people and resources.
a) pencil b) synfig
c) Hyper card d) Multimedia toolbox
(143) Synfig can be installed on.............Operating system.
11 Eng. Med. Lesson 2 (Computer 6
 a) windows b) Linux c) Mac d) All of these
(144)is the full form of XML.
a) Extensible Markup Language b) Extension Markup Language
c) Explanation Markup Language d) Extra Markup Language
(145) Using.............Software, synfig program can be compressed.
a) winzip b) winRaR
c) Gzip d) Archive Explorer
(146) Synfig files use the filename extension.............In uncompressed form.
a) .sif b) .syf c) .syn d) .snf
(147) Synfig files use the filename extension.............In compressed form.
a) .sifz b) .syfz c) .synz d) .snfz
(148) As soon as synfig starts multi windows appear. Choose the correct option.
a) false b) True c) can’t say d) none of these
(149) How to change the size of window of synfig studio?
a) By maximizing b) using drag and drop
c) By double clicking on the window d) Dragging the boundary lines
(150) How many components are there in the user interface for synfig studio.
a) 2 b) 3 c) 4 d) 5
(151)windows includes system menu and tools to create and edit your artwork.
a) canvas b) panel c) Toolbox d) All of these
(152) Closing the..........., exits the Synfig application.
a) canvas b) panel c) Toolbox d) All of these
(153) There are.............Menus in toolbox.
a) 2 b) 3 c) 4 d) 5
(154)Are the menus of toolbox.
a) Animation,Image b) Format,Help c) File,Help d) Edit,Help
(155)Is the option of toolbox area or palette.
a) the upper palette b) the middle palette c) the lowest palette d) All of these
(156) There are.............Tools in the upper palette.
a) 8 b) 10 c) 12 d) 14
(157)tool is available in the Middle palette.
a) circle b) Rectangle c) Transform d) All of these
(158) The lowest palette contain the default setting for ………..
a) toolbox b) layers c) canvas d) timeline
(159)sets the size of the line for new outline layers.
a) opacity b) Gradient c) Brush size d) Blend Method
(160)means the layer is invisible
a) 0 b) 1 c) on d) off
(161)means the layer is visible
a) 0 b) 1 c) on d) off
(162)sets to a default gradient between the foreground color and background color.
a) foreground color b) background color c) Gradient d) Interpolation
(163) Each waypoint has.............Setting.
a) foreground color b) background color c) Gradient d) Interpolation
(164) When you open a new file or create a new project you will see the............window.
a) canvas b) user c) animation d) all of these
(165) Canvas can be seen at the.............Of the user interface.
a) upper part b) center part c) lower part d) none of these
(166)Is set to “By layer default”.
a) By Blend Layer b) By Layer Default
c) By Default Layer d) By Default Blend
(167) The area with the grey check-board pattern is the working area.
a) green b) black c) blue d) grey
(168)work is done in the working area of synfig.

11 Eng. Med. Lesson 2 (Computer 7

 a) creating elements/layers b) Manipilating elements/layers
c) Both (A) and (B) d) None of these
(169) How many menus are there when we open the Canvas menu?
a) 6 b) 7 c) 8 d) 9
(170) To the left of the canvas we can see …………..
a) status of animation b) button to lock/unlock the keyframe
c) the number of current frame d) all of these
(171) From the right side of the canvas, we can know …………..
a) status of animation b) button to lock/unlock the keyframe
c) both (a) and (b) d) the number of current frame
(172) How many buttons are there on the right side of the canvas.
a) 2 b) 3 c) 4 d) 5
(173)Button is displayed on the right side of the canvas.
a) unlock past keyframe b) unlock future keyframe
c) Turn on animation editing mode d) All of these
(174) How many windows are there on the bottom and to right are customizable dock dialogs?
a) 2 b) 3 c) 4 d) 5
(175) The two windows on the bottom and to the right are customizable...............dialogs.
a) dome b) dos c) dock d) door
(176) We can rearrange the contents of dock dialogs by...............the panel tab to where we want it.
a) clicking b) double clicking c) triple clicking d) dragging
(177) Panels display..............option.
a) layers panel,params panel b) tool options panel,history panel
c) navigator d) all of these
(178) Using..............., we can also zoom in and move the focus around.
a) navigator b) history panel
c) params panel d) tool option panel
(179) The...........column is used to disable specific actions without going through the entire action list.
a) checkbox b) Radio button c) pull down d) drop down
(180) We can...............an action or group of actions just click on the check box.
a) cut,copy b) copy, paste c) undo,redo d) drag,drop
(181) Whenever we move the mouse pointer across the penal................Displays the information related to the task.
a) viewer tip b) tool tip c) work tip d) panel tip
(182)Is the menu option to make a new file in synfig.
a) Toolbox -> new Tool b) File -> New c) (a) or (b) d) none of these
(183)can be done using file properties dialog box of synfig.
a) set the name of the file
b) Give a description to the animation
c) Give information related to image and time
d) all of these
(184)tabs are available in the File properties dialog box of synfig.
a) 2 b) 3 c) 4 d) 5
(185) Number of rames running every second is known as ………….
a) fps b) fsp c) fpa d) fap
(186) Fps stands for ……….
a) File per second b) Form per second c) Frame per second d) font per second
(187) Clicking.............Button in the field properties dialog box, changes can be saved.
a) Finish b) OK c) End d) Save
(188) After creating …………. We can now start creating our artwork and animation.
a) creating a file b) set the properties c) both (a) and (b) d) none of these
(189)Help you to create the artwork for your multimedia project.
a) Layers b) panels c) Canvas d) Tools
(190) Using tools,.............Can be done.
a) creating and object b) modifying objects c) both (a) and (b) d) none of these

11 Eng. Med. Lesson 2 (Computer 8

 (191) How many tools are there in the middle palette of synfig?
a) 10 b) 14 c) 16 d) 18
(192) What does each tool contain?
a) options b) parameters c) both (a) and (b) d) none of these
(193) When you select a particular tool, the...............panel displays the options that are available for that tool.
a) tools options panel b) params panel c) layer panel d) tools panel
(194) Which tool is used to create object?
a) circle, Rectangle b) polygon,star c) both (a) and (b) d) Fill,Eyedrop
(195) A circle has...............important parameters.
a) 2 b) 3 c) 4 d) 5
(196) We can see the parameters of circle in the..............panel.
a) layer panel b) canvas panel
c) tools panel d) parameter panel
(197) We can change any of the parameter …………
a) before drawing a picture b) while drawing c) after drawing a picture d) none of these
(198) Clicking in the where you want the centre of the circle to be and then.............To set the radius.
a) drag the mouse b) drop the mouse
c) clicking the mouse d) double clicking the mouse
(199)Panel is used to change the name of the circle layer.
a) Tools panel b) Tool options panel
c) circle panel d) circle option panel
(200) By clickling on......tool, duck can be displayed.
a) transform b) select
c) fill d) view
(201)duck is used to change the location of the circle.
a) Green b) Blue c) Orange d) yellow
(202)duck is used to change the radius of the circle.
a) Green b) Blue c) Orange d) yellow
(203)Is displayed for all the layers selected in working area.
a) window b) Tool c) Duck d) center
(204)is done to change the parameters.
a) Drag the duck b) Double click the duck
c) select the duck d) control the duck
(205) For more precise control, the...........can be used.
a) ducks b) objects c) cursor keys d) windows
(206) If we want to constrain the movement to be either horizontal or vertical then hold down the............key while
dragging.
a) Ctrl b) shift c) Alt d) Enter
(207) One type of duck interferes or gets into the way of another duck. Select the statement.
a) True b) False c) Can’t say d) none of these
(208) Rectangle tool can be used as per...........tool.
a) Transform b) circle c) select d) polygon
(209)Tool is used to create a rectangle layer.
a) Rectangle b) Angle c) Diamond d) circle
(210) Options of rectangle tool are displayed in …………
a) parameter options b) rectangle options c) tool options d) user options

(211) Where we have to click to complete the polygon?

a) First point b) Last point
c) Right click on first point d) Right click on last point
(212) To stop drawing the object, right click on the...........in BLine tool
a) First point b) Last point
c) Right click on first point d) Right click on last point

11 Eng. Med. Lesson 2 (Computer 9

 (213) Using..............tool, you can draw with the help of mouse.
a) fill b) eyedrop c) draw d) BLine
(214) From...........colour is selected to fill in the object.
a) viewer palette b) object palette c) fill palette d) color palette
(215) Fill tool affects............layer.
a) circle, rectangle b) polygon, star c) area, outline,checkboard d) all of these
(216) Some layers are not affected by fill tool because they use............to fill the visual area.
a) gradient b) eyedrop c) duck d) panel
(217) In............gradient. Click where you want the gradient to begin and drag to where you want the transition to end
a) conical b) Linear c) Radial d) spiral
(218) We can edit the gradient by moving the end point in any direction using the...........tool.
a) normal b) gradient c) editor d) selection
(219)produces the trasition being at the center of those circles.
a) Conical b) spiral c) Linear d) Radial
(220) In............, we have to click where the centre of the circles to be and drag to set the radius of the transition.
a) Conical b) spiral c) Linear d) Radial
(221)Has the appearance of looking down on a tip of a cone.
a) Conical b) spiral c) Linear d) Radial
(222) Conical has the appearance of looking down on a.................of a cone.
a) bottom of a cone b) top to bottom c) (a) or (b) d) none of these
(223) In...........gradient, the center endpoint adjusts the center of the gradient and the other endpoint adjusts the
direction of the gradient
a) Conical b) spiral c) Linear d) Radial
(224)can be done using Tool panel option.
a) To select the name of new layer b) To decide horizontal and vertical size of text
c) To select fonts d) None of these
(225)is used to insert text.
a) One line b) Two line c) (a) or (b) d) None of these
(226) If single line is selected then click the...........to submit the value while, in multiline editor.
a) Enter key b) shift key c) ok button d) finish button
(227)Tool does not affect the result.
a) zoom tool b) View tool c) Hand tool d) Duck tool
(228)tool allows you to select objects and to move, rotate or scale the ducks.
a) zoom b) Transform c) move d) Movement
(229) Smoothmove tool works as..........Tool.
a) Rotate b) Zoom c) Scale d) Transform
(230)option is used to select multiple ducks.
a) Ctrl+A b) Dragging a rectangle around the duck
c) (a) or (b) d) None of these

11 Eng. Med. Lesson 2 (Computer Studies)

1
 Std:11 EM Lesson 3 Creating Animation Using Synfig
(01) is the sequence of images displayed one after the other in a given time frame.
a) Animation b) Ordering c) Numbering d) Media order
(02) is a visual change over time where in the digital images are played one after the other to create a moving
effect.
a) Animation b) presentation c) photographs d) canvas
(03) The images used in animation can be first created and then displayed in a sequence known as animation.
a) One-by-one b) frame-by-frame c) image-by-image d) frame-to-frame
(04) are defined as the length of time in the document.
a) Frames b) sequence c) image d) Animation
(05) Each frame consists of some to be displayed over a period of time.
a) Image only b) Text only c) canvas d) object
(06) In which type of animation, each small change in the image is created and then displayed in sequence?
a) Frame by frame b) cel c) Morphing d) kinematics
(07) A is a frame in which a changes to an object’s properties are defined.
a) Multiframe b) single frame c) keyframe d) userframe
(08) The first position and the last position of the object has to specify in animation is prepared using .
a) Frame-by-frame b) multiframe c) keyframes d) Auto animation
(09) is an action which calculates the number of frames between keyframes and path of the action.
a) Tweening b) Morphing c) Transforming d) none of these
(10) Animation created using tweening is known as animation.
a) Frame-by-frame b) cel c) Morphing d) none of them
(11) Another type of computer animation is known as .
a) Thermodynamics b) kinematics c) Trinematics d) Dynamics
(12) An effect known as where in the image transforms into another.
a) Morphing b) Transforming c) converting d) changing
(13) What is the default end time in properties dialog box?
a) 2s b) 4s c) 5s d) 6s
(14) The color of the circle can be changed later on using the panel.
a) Parameter b) Tool option c) Layer d) History
(15) Fps stands for .
a) File per second b) frames per second c) file per signal d) none of them
(16) By default each second is divided into frames
a) 6 b)12 c) 18 d) 24
(17) In synfig, grab the circle and hold the key to move it in a straight line to the right of the working area.
a) Ctrl b) Shift c) Alt d) Caps
(18) means the computer uses various algorithms to apply the final effects you have specified on the
object created.
a) Capturing b) Animating c) Rendering d) Tweening
(19) Before rendering, click on the to leave editing mode.
a) Animation editing mode b) animate mode c) editing mode d) entry mode
(20) Which option is selected to save the file?
a) Caret->save->file b) File->caret->save c) caret->file->save d)none of them
(21) In which tab of properties window, frames per second, start time and end time is specified?
a) Image b) Time c) Other d) Duration
(22) In synfig, tool is used to make changes in the circle drawn.
a) Transform b) scale c) zoom d) edit
(23) In keyframe panel, Time indicates .
a) Start time b) end time c) half time d) all of them
(24) In keyframe panel, Length indicates .
a) Width b) duration c) minutes d) all of them
(25) In keyframe panel, jump are links used to jump to .
a) Start time b) end time c) correct time d) stop time
(26) represent the time at which the parameter (like color or location) of the object changes.
a) Waypoint b) keyframes c) keypoint d) timeframe
(27) Window status bar is located on the of the window.
a) Top b) bottom c) left d) right
(28) To repeat the animation is used.
a) Animation loop b) Time loop c) Repeat animation d) Looping

Std:12 EM, Lesson 3 Creating Animation Using Synfig 1

 (29) Animation can be preview using .
a) Preview->Animation b) File->preview c) File->File preview d)File->Animation preview
(30) The time loop parameters shows the duration which denotes the that are looped.
a) Frames b) seconds c) a or b d) none of them
(31) Which of the following is correct entry in the timeslider?
a) 3f 9f b) 3s 9f c) 3f 9s d)3s 9s
(32)Makes the picture lively.
a) presentation b) Internet c) Animation d) Audio,video
(33) In............the digital images are played one after the other to create a moving effect.
a) animation b) framming c) multimedia d) viewing
(34)are used to make the picture or image lively.
a) natural Images b) Artificial images c) Digital images d) none of these
(35) The images used in animation can be created ……….
a) first b) while making animation c) later on d) any of these
(36) In animation, images are displayed in …………
a) as per the size b) in alphabetical order c) sequence d) any of these
(37)is the type of animation.
a) morphing b) frame by frame/tweening/cel
c) kinematics d) all of these
(38) Freames are defined as............in the document.
a) the length of time b) the length of object c) the length of frames d) the length of animation
(39)consists of some objects to be displayed over a period of time.
a) cel b) frame c) Gorm d) Work area
(40)term defines the length of time in a document.
a) Layer b) keyframe c) Timeline d) frame
(41)suggests to display object using a period of time.
a) panel b) object c) frame d) keyframe
(42) What type of animation is frame by frame?
a) slow and boring b) fast and easy c) slow but easy d) fast but tedious
(43) Using............animation can be made easily.
a) object b) form c) image d) keyframes
(44)changes are made in key frames.
a) properties of frames b) properties of time
c) properties of cel d) properties of object
(45)Is the frame having changes in object’s properties.
a) keyframe b) panel c) Timeline d) layer
(46) Using keyframes we need to specify the...............position of the object.
a) beginning b) last c) in-between d) both (a) and (b)
(47) Using keyframes we need not to specify the...........position of the object.
a) beginning b) last
c) in-between d) both (a) and (b)
(48) The series of frames in between are drawn automatically is known as …………
a) morphing b) tweening c) kinematics d) all of these
(49) The computers generally employ............type animation.
a) morphing b) cel c) kinematics d) all of these
(50) Kinematics is a type of …………..
a) video b) multimedia c) animation d) presentation
(51)Is the study of movement and motion of objects that have joints.
a) frame by frame animation b) Tweening c) Morphing d) kinematics
(52) Kinematics is the study of ……………
a) movement b) motion c) both (a) and (b) d) none of these
(53) Walking man or running leopard is the example of ………….
a) frame by frame animation b) tweening c) morphing d) kinematics
(54) You must have seen that a person’s face transforms into another face and so on is ………..
a) frame by frame animation b) tweening c) morphing d) kinematics
(55) What does timebar display?
a) position of time b) position of work
c) position of object d) position of mode
(56) We can see the............indicator showing the position in time.

Std:12 EM, Lesson 3 Creating Animation Using Synfig 2

 a) red b) orange c) green d) blue
(57) Clicking at various points in timebar, we can see values like............in the entry field.
a) 0f b) 1s c) 1s 10f d) any of these
(58) We can type the position in the entry field in time bar and press............key.
a) Enter b) Tab c) Home d) End
(59) What does ‘s’ suggest in timebar?
a) Source b) section c) second d) solution
(60) What does ‘f’ suggest in timebar?
a) Form b) Frame c) Font d) File
(61)indicate a specific point on the timeline in terms of seconds (s) and frames.
a) second, frame b) Minute, frame c) Second, object d) Minute, object
(62) By default each second is divided into...........frames.
a) 12 b) 24 c) 36 d) 48
(63) If 12 frames pass in 5 seconds, what will timebar show?
a) 5s 12f b) 5f 12s c) 12f 5s d) 12s 5f
(64) How many buttons are there on the right side of the timebar?
a) 2 b) 3 c) 4 d) 5
(65)button is there on the side of the timebar.
a) unlock past keyframe b) unlock future keyframe
c) Turn on animation editing mode d) All of these
(66) Turn on animate editing mode button is of............color.
a) red b) orange c) green d) blue
(67) When ‘Turn on animate editing mode’ button is displayed?
a) if the end time is not zero b) if the end time is zero
c) if the beginning time is not zero d) if the beginning time is zero
(68) Red color line around canvas suggests............status of animate editing mode.
a) close b) off c) active d) inactive
(69) When animated editing mode gets active, changes are affected in............part.
a) timeline b) time slider c) time manager d) time icon
(70) When animated editing mode not active, changes are affected to …………
a) timeline b) time slider c) time manager d) time icon
(71)menu option is used to start the synfig software.
a) Application -> Graphics->synfig b) Application -> Image->synfig
c) Application -> picture->synfig d) Application ->synfig
(72) How to open the canvas properties dialog box in synfig?
a) Caret->Properties b) caret->File->Properties c) caret->Edit->Properties d) caret->Format->Properties
(73)Which type of information can be added in canvas info of the canvas property dialog box?
a) File,Description b) Name,Description c) File,Name d) Name,Image
(74) How many tabs are there in the canvas property dialog box?
a) 3 b) 4 c) 5 d)
6 (75)…………. tab is displayed in the canvas property dialog box.
a) Image b) Time c) Other d) All of these
(76) is the value of start time in the Time tab of canvas property dialog box.
a) 0f b) 1f c) 2f d) 3f
(77) Is the value of End Time in the Time tab of canvas property dialog box.
a) 2s b) 3s c) 4s d) 5s
(78) Button is used to save the changes and close the window in the canvas property dialog box.
a) Apply b) Close c) OK d) Finish
(79) is used for the color of circle.
a) foreground color b) palette c) parameter panel d) All of these
(80) tool is used change the color of the circle.
a) Transform tool b) Edit tool c) scale move tool d) property tool
(81)When we open a new file in synfig ………… is displayed in entry field of the timeline.
a) 0s b) 0f c) 1s d) 1f
(82) button is used to see how the animation will look in synfig.
a) play b) start c) Begin d) Launch
(83) button is used to see the animation frame by frame in the synfig.
a) previous Frame b) Next Frame c) (a) or (b) d) none of these
(84) is the default extension of file in synfig.

Std:12 EM, Lesson 3 Creating Animation Using Synfig 3

 a) .syn b) .sin c) .sifz d) .sif
(85) menu option is used for file rendering in synfig.
a) caret->Render b) Caret->File->Render
c) caret->Edit->Render d) caret->Format->Render
(86) Options are available in the target tab of Render Settings.
a) Filename,Quality b) Name,Description c) Filename,Target d) Name,Target
(87) tab is available in the Render setting dialog box.
a) Image b) Time c) Other d) All of these
(88) What is the default file format in file rendering ?
a) auto b) gif c) bmp d) png
(89)While rendering the file, auto format is changed to ………..
a) sizf b) gif c) bmp d) png
(90) software can be used to view animation after rendering the file.
a) web browser b) Image viewer c) Both (a) and (b) d) none of these
(91) Is used to create background in synfig.
a) Line tool b) Rectangle Tool c) Transform tool d) BLine Tool
(92) Keyframe panel is opened using.............Panel to insert a keyframe.
a) parameter panel b) timeline panel c) property panel d) layer panel
(93) Panel is used to insert keyframe.
a) parameter panel b) Timeline panel c) Keyframe panel d) Layer panel
(94)How many options are there in the keyframe panel?
a) 2 b) 3 c) 4 d) 5
(95) option is available in the keyframe panel.
a) Time and Length b) Jump c) Description d) All of these
(96) line is added in the list while inserting a new keyframe.
a) 0f,0f(JMP) b) 1f,1f (JMP) c) 2f,2f(JMP) d) 3f,3f(JMP)
(97) What is the meaning of JMP?
a) jumping b) Jump c) jamping d) jamp
(98) What is the diamond called in the time track panel?
a) way-point b) Day-point c) Lay-point d) None of these
(99) What is the color of diamond in way point?
a) Red b) Green c) Orange d) Black
(100) Is the shape displayed in the waypoint in time track panel.
a) Triangle b) Diamond c) Rectangle d) Octal
(101) What does the way point represent?
a) time of changing color b) Time of changing location
c) various factorsd of object d) All of these
(102) message is given when rendering done successfully.
a) File rendered successfully b) File rendering succesfully
c) File render successfully d) File successfully rendered
(103) bar displays the message for rendering done successfully.
a) Task bar b) Property bar c) Status bar d) Window bar
(104) What is loop?
a) circulating b) Continuing c) Repeating d) All of these
(105) Repeating data for some time is known as ……………
a) time loop b) repeating loop c) definite loop d) regular loop
(106) Using..............animation can be generated twice.
a) copy keyframe principle b) double keyframe pronciple
c) duplicate keyframe principle d) creative keyframe principle
(107) option is available in circle tool.
a) create outline BLine b) Create Region BLine c) Bline Origins at Center d) All of these
(108) Is useful to insert time loop layer.
a) add new layer -> Other -> Time loop b) Add layer -> Other -> Timeloop
c) Add new layer -> Timeloop d) Add layer -> Timeloop
(109) What does elements of time loop suggest?
a) preview time b) Element of time c) Duration of time d) Time format
(110) Shows that loop will run for how many frames or second.
a) Time line b) Time loop c) Time track d) Time tracker

Std:12 EM, Lesson 3 Creating Animation Using Synfig 4

 11-EM Unit-4 Introduction to Layers
(01) Which of the following objects are required to draw on canvas to create animation on ‘sunrise scene’?
a) Mountains b) sun c) birds,trees d) all of them
(02)A in synfig refers to different levels on which we can place our drawing objects or pictures, stacked above
and below each other.
a) Layer b) slide c) animation d) Drawing
(03) Use of what gives the freedom to work with each object individually?
a) Slide b) layers c) animation d) Drawing
(04) Modifying does not disturb the other objects either above or below it.
a) Slide b) layers c) animation d) drawing
(05) can also be rearranged, allowing us to change the order in which objects are displayed,thus changing
the appearance of our scene.
a) Slide b) Layers c) Animation d) Drawing
(06) In synfig, each individual element of the is broken down into layers.
a) Canvas b) page c) document d) presentation
(07) The layers in synfig are from other animation software.
a) Different b) same c) similar d) none of them
(08) Every has their own layer.
a) Object b) element c) effect d) all of them
(09) A layer represents a single primitive such as -
a) Object b) outline c) image d) all of them
(10) The upper layer can change the behavior of the layers below it and can distort or modify the layers beneath using
.
a) Effect b) filter layers c) (a) or (b) d) none of them
(11) In synfig, there are different types of layers such as-
a) Gradient b) blur c) distortion d) all of them
(12) Each layer has its own set of .
a) Parameters b) canvas c) animation d) command
(13)The parameters of a layer can be seen by selecting the layer from the panel and then looking into
the params panel.
a) Layers b) canvas c) primitives d) filter
(14) defines how the image is layered on everything below it.
a) Animation mode b) Blend mode c) Multimode d) Image mode
(15) In Blend mode,the default setting is , which simply displays the content of the layer.
a) Primary b) composite c) Encapsulated d) Straight onto
(16) what is used for the gradient to be applied only to a single object and not all the objects below the
gradient layer?
a) Encapsulation b) composite c) straight onto d) none of them
(17) means grouping things together.
a) Encapsulation b) composite c) straight onto d) none of them
(18)If we want to apply to a particular object or a group of objects then we need to encapsulate them into
a layer.
a) Gradient b) color c) outline color d) animation
(19) Using we can apply the gradient to one layer without applying it to the layers beneath it
a) Encapsulation b) composite c) straight onto d) none of them
(20) Which key should be press and hold to select two layers?
a) CAPS b) CTRL c) SHIFT d) ALT
(21) Clicking on Right click -> Encapsulate will create a new layer named .
a) Inline canvas b) outline canvas c) inbetween canvas d) animated canvas
(22) Clicking on a small triangle near the inline canvas will to show the related layers.
a) Expand b) compress c) enlarge d) reduce
(23)If we the gradient layer using the lower layer button the gradient will now be applicable to only one of
the circle layer.
a) Reposition b) animate c) delete d) duplicate
(24) The gradient layer has an effect on only the layers that are it in the encapsulated area.
a) Above b) below c) right d) left
(25) A can only modify the data that it get from the layer directly below it.
a) Layer b) canvas c) slide d) animation

11 EM Lesson 4 Introduction to Layers (www.verymicro.org) 1

 (26)If Blur Layer is used on of the layer inside the inline canvas, it would just blur the inline canvas layers
and not every layer that lies under the inline canvas.
a) Top b) bottom c) left d) right
(27) Which tool is used to create user path for rotation?
a) Bline tool b) Line tool c) path tool d) none of them
(28) Select Bline tool to create our path for rotation and select from the Tool option panel.
a) Create Outline Bline b) Create Region Bline
c) Create plant Bline d) Create curve Gradient Bline
(29) Which key is pressed to clear the Bline?
a) CTRL b) ESC c) ALT d) SHIFT
(30) Which tool is used to finish the Bline?
a) Transform tool b) smooth Finish tool c) scale tool d) Finish tool
(31) To add a new rotate layer above the circle layer select the in the layers panel.
a) Circle layer -> Right click -> New layer -> Transform -> Rotate
b) Circle layer -> Right click -> New layer -> Transform -> Rotate -> Transform
c) Circle layer -> Left click -> New layer -> Transform -> Rotate ->Transform
d) Circle layer -> Left click -> New layer -> Transform -> Rotate
(32) feature is used to attach a vertex of an object to a Bline.
a) Link to Bline b) Link to vertex c) Link to object d) Link to layers
(33)Drag the circle a little bit using the positioning duck which is in color to record the starting position on
the “0f” mark in the timeline.
a) Red b) Green c) Yellow d) Black
(34) The in each image shows the position of the circle at that particular time.
a) Timeline b) keyframe c) animation d) effect
(35) the circle directly to the end point by moving in clockwise direction. This will not record properly
the position of the circle at different timing locations.
a) Drag b) Do not Drag c) Click and Drag d) Click
(36) Each individual element of the canvas is broken down into which of the following
components?
a) Frames b) layers c) keyframes d) panels
(37) Gradient,blur,direction and filter are types of which of the following components?
a) Frames b) layer c) keyframes d) panels
(38) Natural scene is made of ……………..
a) multimedia b) things c) objects d) all of these
(39) Where is the objects when we draw it on the canvas?
a) in front of any object b) Behind the object c) (a) or (b) d) none of these
(40) How should we arrange the objects like the sun and mountains?
a) The sun object behind the mountains object
b) The mountain object behind the sun object
c) the sun object and the mountains object behind any other object
d) None of these
(41)Contains its own layer.
a) Object,element,effect b) Effect,object,panel c) Time,parameter,layer d) parameter,object,panel
(42) How the layers are kept?
a) Above and below each other b) one by one c) (a) or (b) d) Invisible
(43) How can we imagine the layer as?
a) pen b) pencil c) paper d) All of these
(44) Use of layers gives us the freedom to work with each object …………
a) equally b) individually c) variably d) as a filter
(45) Layer can be rearranged. Find the
pr (46)oper option.
a) True b) False c) Can’t say d) None of these
(47) The layers in synfig are different from other animation software in the................Aspects.
a) two b) three c) four d) five
(48)Option makes the synfig layer different than other animation software.
a) Every object,element and effect has their own layer. b) The upper layer can change the behavior
c) Both (a) and (b) d) None of these
(49)is used to distort or modify the layers.

11 EM Lesson 4 Introduction to Layers (www.verymicro.org) 2

 a) Filter layer b) Master layer c) Gradient layer d) Distortion layer

11 EM Lesson 4 Introduction to Layers (www.verymicro.org) 3

 (50) How many things does the layer represent?
a) one b) two c) three d) Four
(51)shows the type of layer.
a) Gradient b) pallette c) Animate editing mode d) timebar
(52)Presents the layer on which objects are displayed.
a) parameter b) panel c) Layer d) Frame
(53) In synfig each layer holds ………….
a) independent b) equal c) non-reliant d) none of these
(54) To view parameters of any layer..............is used.
a) layers panel b) params panel c) (a) or (b) d) layer properties
(55)is used to change the shape of layer slowly from dark to light colour.
a) Filter b) Gradient c) Blur d) Distortion
(56) To see the gradient effect the object colour is set to ………….
a) any colour b) predefined c) white d) black
(57) Where is the gradient tool available?
a) property pane b) Tool Box c) Tools panel d) Gradient Box
(58) What is parameter?
a) Feature of synfig b) special separate software
c) it is a part of Linux d) None of these
(59) Where do we find the parameter of Blend Method?
a) property b) Toolbox c) params d) Navigation
(60)Shows the information lying on layer.
a) Composite b) Filter c) Gradient d) Encapsulation
(61)Panel show the elements of a layer
a) keyframe b) Layer c) params d) Time track
(62) In the blend method parameter change the setting to …………
a) straight into b) straight onto c) straight overto d) straight backto
(63) If we want to apply gradient to particular object or a group of objects then we need …………
a) encapsulation b) filter c) distortion d) blur
(64)Using encapsulation applies the gradient to one layer without applying it to the layers beneath it. Find the proper
option.
a) True b) False c) can’t say d) None of these
(65) Using.............Gradient can be applied to only one layer.
a) parameter b) filter c) encapsulate d) blur
(66) Encapsulation applies the gradient to one layer without applying it to the layes beneath it. Find the proper option.
a) True b) False c) can’t say d) None of these
(67) Right clicking on any object and selecting.............Can give gradient effect to the object.
a) gradient b) parameter c) encapsulatin d) filter
(68)shape is displayed near the Inline canvas.
a) Triangle b) square c) Round d) Oval
(69) If we click triangle lying near inline canvas,...............is done.
a) compression b) expansion c) clear d) arrangement
(70)Button is used for the rearrangement of gradient layer.
a) Lower Layer b) Layer Lower c) Upper Layer d) Layer Upper
(71) Rearrangement of Gradient layer using Lower Layer button, it affects............layers.
a) one b) two c) three d) many
(72) The gradient layer has an effect on only the layers that are below it in the............area.
a) filter b) parameter c) encapsulated d) blur
(73) A layer can only modify the data that it gets from the layer directly ………….
a) above it b) below it c) right side of it d) none of these
(74) If we used a blur layer on top of the layers inside the inline canvas, it would blur the …………….
a) inline canvas layers b) all layers under inline canvas layers
c) both (a) and (b) d) none of these
(75)type of animation can be created in synfig.
a) Rotation on the specified path b) Ball moving around particular path
c) object moving from right to left d) All of these
(76)location we have to specify for the moving object.
a) Beginning point b) Ending point c) both (a) and (b) d) Location of all points

11 EM Lesson 4 Introduction to Layers (www.verymicro.org) 4

 (77) By default..............path is considered by synfig.
a) straight b) Rotate c) circular d) oval
(78) Where can we see the create outline BLine option of BLine tool?
a) Tools option b) Gradient option c) BLine option d) outline tool
(79)is used to fill desired colour in an object.
a) palette Editor b) palette viewer c) color Editor d) color viewer
(80)layer is inserted above the circle layer to rotate the layer.
a) circle layer b) Rotate layer c) spin Layer d) swivel layer
(81)is used to combine circle Layer and Rotate layer.
a) Encapsulate b) parameter c) Navigator d) Params
(82)key is used to select two layers at a time.
a) Alt b) shift c) Ctrl+Alt d) Ctrl+shift
(83) To combine circle layer and rotate layer we have to right click on it and select.............Option.
a) encapsulate b) group c) parameter d) joint
(84) Line to BLine feature is used to attach …………..
a) a vertex of an object to the vertex of Bline b) a vertex of an object to the Green Duck of a Bline
c) a vertex of a layer to the vertex of Bline d) a vertex of a layer to the Green Duck of a Bline
(85)is used to close the layer of Inline canvas.
a) close the triangle near it b) Remove the triangle near it
c) click on the triangle near it d) Right click on the tringle near it
(86) If we start animation editing mode............color line is displayed around canvas.
a) green b) red c) black d) blue
(87)suggest the starting location in a timeline.
a) 0s b) 1s c) 2s d) 3s
(88) Where the way-point is inserted ?
a) 0f b) 1f c) 2f d) 3f
(89)Button is used to preview the animation.
a) start b) Launch c) play d) preview
(90)is done to see the result of the file.
a) save and Reform b) save and Rearrange c) save and Render d) save and Resection
(91)is useful to see the result of a file.
a) web server b) web browser c) webpage d) website

11 EM Lesson 4 Introduction to Layers (www.verymicro.org) 5

 Standard:-11 EM 5.Using pictures in synfig
(01) What is used in a presentation or animation to improve the quality of reception?
a) Pictures b) slide c) page d) Database
(02) In synfig, we can insert images to give a different look to our .
a) Database b) animation c) document d) none of them
(03) Which of the following option is used to import image?
a) Import -> File b) Import -> Image c) File-> Import d) File-> Import Image
(04) Which key combination is used to import image?
a) CTRL + i b) CTRL + f c) CTRL + d d) CTRL + k
(05) In import image dialog box, which button is clicked after selecting image file?
a) Import b) open c) insert d) None of them
(06)To the imported image,select the image layer in the layers panel, two green points on the image will be
seen which can be used to change the size of the image.
a) Delete b) resize c) enlarge only d) reduce only
(07) Whenever the image is resize, the image tends to get distorted because is not maintained.
a) Image lock b) resize ratio c) aspect ratio d) distortion
(08) To resize the image and keep its aspect ratio we need to the layer.
a) Encapsulate b) morphing c) kinematics d) tweening
(09) To encapsulate, right click on the image layer and select .
a) Do encapsulation b) encapsulation c) encapsulate d) create Encapsulation
(10) By selecting encapsulate by right clicking on the image layer will add canvas layer.
a) Inline b) outline c) thickline d) incanvas
(11) Open up the encapsulated layer using the triangle and you can see the image layer inside the inline canvas
a) Big b) large c) small d) none of them
(12) Select the image layer -> to add a new scale layer on top of the image layer.
a) Right click -> New Layer->scale->Transform b) Right click -> Transform ->New Layer->scale
c) Left click -> New Layer-> Transform ->scale d) Right click -> New Layer-> Transform ->scale
(13) To rotate the image then add a new rotate layer above the scale layer and select the scale layer -> .
a) Right click -> New Layer->Rotate->Transform b) Right click ->Rotate -> New Layer ->Transform
c) Right click -> New Layer->Transform->Rotate d) Left click -> New Layer->scale->Transform
(14) By using the you can rotate the image as you want.
a) Rotation duck b) rounding duck c) moving duck d) image duck
(15) In synfig, rotation duck is of color.
a) Blue b) yellow c) green d) red
(16) is a feature by which you can hide or reveal areas of a layer.
a) Masking b) encapsulate c) polymerization d) none of them
(17) Basically, the shape used as a mask acts like a with the help of which you can see the objects beneath it.
a) Window b) kinematics c) morphing d) encapsulate
(18) Which tool is useful to draw a cloud on the canvas?
a) Bline b) Rectagle c) scale d) smooth move
(19) can be used as patch to hide the objects beneath it.
a) Masking b) Encapsulate c) polymerization d) none of them
(20) Which button is clicked to see the animation
a) Play b) pause c) stop d) Exit
(21) Which tool is used to create the mask shape?
a) Bline b) Rectangle c) scale d) smooth move
(22) To create mask shape, select the Bline tool and from the tool options select only option.
a) Create Region Bline b) Create plane Bline
c) Create curve Gradient Bline d) Create Advanced outline Bline
(23) Draw a rectangular shaped Bline and to end the bline,right click and select at the last vertex.
a) Repeat Bline b) Loop Bline c) continuous Bline d) End Bline
(24)Select the mask layer from the layers panel and in the parameters panel set the blend method to so while
playing the animation the cloud is now not visible on the canvas.
a) Alpha over b) Alpha c) Alpha start d) Alpha end
(25) Select the mask layer and in the parameters panel select the option to shows the effect on the canvas.
a) Revert b) invert c) divert d) none of them
(26) To handle the visibility of the images the parameters and property of each layer will be used.
a) Blend method, amount b) blending,masking c) masking, invert d) masking, amount

11EM Computer Subject : Lesson-5 Using Pictures in Synfig 1

 (27) Amount value of signifies the layer is fully visible.
a) 0 b) 1 c) 2 d) 3
(28) Amount value of meanse the layer is fully transparent.
a) 0 b) 1 c) 2 d) 3
(29) Multiple images can be selected using key.
a) CTRL b) ALT c) SHIFT d) CAPS
(30) specifies that the parameter is controlled automatically in different ways.
a) Convert b) Revert c) controller d) property
(31) Selecting timed swap as amount property will add new sub parameters to the amount property.
a) Before,After b) Time and Length c) (a) and (b) d) before only
(32) If you want to place a background in the slideshow then encapsulate the image layers.
a) All b) first c) last d) before only
(33)To skip a particular portion of the animation and move further, these actions used for interactivity in animation
software are known as .
a) Action scripts b) multiscript c) document d) programming
(34) is used to add flexibility to the animation programs.
a) Action script b) multiscript c) Document d) programming
(35)The term signifies the use of scripting language to add flexibility to the actions performed during the
animation.
a) Action script b) multiscript c) Document d) programming
(36) helps the user to either play the animation on a particular action or move as per his choice during the
animation.
a) Action script b) multiscript c) Document d) programming
(37)Synfig studio does not support action scripting directly in the animation software but used to add
interactivity to our animation.
a) Javascript b) java c) (a) or (b) d) none of them
(38) code is used to play the animation only when the user takes the mouse over the image.
a) Javascript b) multiscript c) (a) or (b) d) none of them
(39) The editor called can be used to write java code.
a) Gedit b) Aedit c) Xedit d) Nedit
(40) web page created using Gedit software can be saved with extension .
a) .java b) .html c) .as d) .gif
(41)The animation files created using particular animation software can be converted into for further
manipulation.
a) SWF files b) GIF files c) MIDI files d) none of them
(42) is an open source software tool suite which provides the conversion of various file formats into swf files.
a) CONVERT_SWF b) SWFTOOLS c) SWF MAKER d) SWF CREATOR
(43) is an Adobe flash file format used for vector graphics animation.
a) SWF b) GWF c) AFF d) VGA
(44)After converting the files into format they can be further manipulated or created using Adobe Flash
animation software
a) SWF b) GWF c) AFF d) VGA
(45) Which program converts gif files into swf files?
a) GIF2SWF b) PNG2SWF c) JPEG2SWF d) PDF2SWF
(46) Which program converts png files into swf files?
a) GIF2SWF b) PNG2SWF c) JPEG2SWF d) PDF2SWF
(47) Which program converts jpeg files into swf files?
a) GIF2SWF b) PNG2SWF c) JPEG2SWF d) PDF2SWF
(48) Which program converts pdf files into swf files?
a) GIF2SWF b) PNG2SWF c) JPEG2SWF d) PDF2SWF
(49)Which program converts wav audio files into swf files?
a) WAV2SWF b) AVI2SWF c) FONT2SWF d) AVIMOV2SWF
(50) Which program converts avi animation files into swf files?
a) WAV2SWF b) AVI2SWF c) FONT2SWF d) AVIMOV2SWF
(51) Which program converts font files to swf files?
a) SWF2SWF b) AVI2SWF c) FONT2SWF d) FONT2SWF
(52) Which program extracts images, sounds and movie clips from swf files?
a) SWFExtract b) ExtractAll c) SWFExtractAll d) None of them

11EM Computer Subject : Lesson-5 Using Pictures in Synfig 2

 (53) Which of the following commands is used as a shortcut key to import image?
a) CTRL + a b) CTRL + m c) CTRL + i d) CTRL + n
(54) Which of the following color represents the points used to change the size of the image?
a) Green b) yellow c) blue d) red
(55) Which of the following amount value signifies that the layer is fully visible?
a) 1 b) 0 c) 2 d) -1
(56) The visibility of the images is handled by which of the following parameters?
a) Blend,amount b) mask, amount c) blend, import d) mask, blend
(57) Which of the following blend method is used to reveal or hide the object?
a) Composite b) alpha over c) straight onto d) straight
(58) Timed swap property adds which of the following sub parameters?
a) Up, down, time , length b) before, after, size, shape
c) before, after, time, length_ d) top, bottoms, time, length
(59) Which of the following is used to add actions as a part of interactivity in animation software?
a) Action script b) java script c) action programs d) java actions
(60) Which of the following is a feature used to hide or reveal areas of a layer?
a) Tweening b) masking c) morphing d) encapsulation
(61) How many options are there for importing image on canvas?
a) 2 b) 3 c) 4 d) 5
(62) Whose appearance depends on image that we import on canvas in synfig?
a) Layer b) Screen c) File d) Object
(63) Which panel is used to change size of image imported through synfig?
a) Layers panel b) Master panel c) Image panel d) import panel
(64) Which layer is selected from layers panel for changing size of image through synfig?
a) Master Layer b) Graphics Layer c) Vector Layer d) Image Layer
(65) Which coloured dots are seen on change of image size in synfig?
a) Red b) Blue c) Green d) Yellow
(66) How many dots are seen in synfig for changing image size?
a) 2 b) 3 c) 4 d) 5
(67) Where are dots for changing image size in synfig?
a) Upper left corner and lower left corner b) Upper right corner and lower right corner
c) Upper left corner and lower right corner d) Upper right corner and lower left corner
(68)What kind of image is obtained after its size is changed?
a) Beautiful b) Disfigured c) proportionate d) Special
(69) What is done to encapsulate any image?
a) Image -> Encapsulate b) Format -> Encapsulate
c) left click on image and then Encapsulate d) Right click on image and then Encapsulate
(70) To change the size of image in synfig which variable’s value is changed?
a) inline canvas b) Amount c) Scale d) Origin
(71) What is added in synfig to rotate image?
a) Rotation Dot b) Rotation Duck c) Rotation Docks d) Rotation image
(72) What is useful to show the movement of something ?
a) Word Art b) Animation c) Action d) Text
(73) By using masking what kind of an effect can be given to some part ?
a) Can Hidden b) can be shown again c) Both (a) and (b) d) None of these
(74) What is used in synfig as a patch to hide an object ?
a) invert b) Transform c) Mask d) Encapsulate
(75) How does screen appear according to image selected in synfig?
a) Uniform b) Different c) Neutral d) Any of the given
(76) In synfig what colour does Animate Editing Mode change to on pressing?
a) Red b) Green c) Blue d) Yellow
(77) Where is the object moved to be recorded on which timeline place to make animation of an object in synfig?
a) 0s b) 0f c) 1s d) 1f
(78) What is masking used for ?
a) Hide objects b) Reveal object c) Both (a) and (b) d) None of these
(79) Which point is right clicked to complete BLine ?
a) First point b) Middle point c) Last point d) Any point
(80) What is required to be done to layer and shape for doing masking ?
a) Loop BLine b) Parameter c) Encapsulate d) Transform
11EM Computer Subject : Lesson-5 Using Pictures in Synfig 3
 (81) By of the following process is the permission to change the name of layer is obtained ?
a) Click b) Double click c) Right click d) Drag
(82) Which of the following blend method is used hide and reveal objects ?
a) Alpha Over b) straight Onto c) straight d) Composite
(83) In synfig making mask, whose value is made is Alpha Over in parameter panel ?
a) Z Depth b) Amount c) Blend Method d) Origin
(84) In parameter panel which of the following object is seen ?
a) Z depth , Amount b) Blend Method, Colour c) Origin , Invert d) All of these
(85) Out of what is the object on which the effect of masking is not desired ?
a) Encapsulatate layer b) Image layer c) Master layer d) Inline layer
(86) Which characteristic gives information about what is under image layer ?
a) Z Depth b) Amount c) Blend Method d) Origin
(87) If pictorial file is not there in computer, from where can it be obtained ?
a) My computer b) My Pictures c) My Documents d) Internet
(88) In synfig on which layer are all images placed to make slide show ?
a) Only one b) Different c) Main d) Secondary
(89) To what value is Blend Method turned to for forming slide show in synfig with different images ?
a) Inline b) Outline c) Vector d) Straight
(90) Which parameter is unable to set all the layers in synfig as through Blend Method ?
a) Z Depth b) Amount c) Colour d) invert
(91) In synfig to make slide show by using different images what type of value is selected ?
a) Timed swap b) Transition swap c) Image swap d) Amount swap
(92) In synfig which menu opens on right clicking parameter ?
a) Synfig menu b) Transition menu c) context menu d) property swap
(93) Which option will you use for giving Time swap effect ?
a) Amount parameters -> Left Click -> Context Menu -> Convert -> Timed swap
b) Amount parameters -> Right Click -> Context Menu -> Convert -> Timed swap
c) Amount parameters -> Left Click -> property Menu -> Convert -> Timed swap
d) Amount parameters -> Right Click -> property Menu -> Convert -> Timed swap
(94) Which of the following option shows the visibility of picture ?
a) Before,After b) Time c) Length d) All of these
(95) How is parameter exchanged by using length in synfig ?
a) After from before b) Over from in c) Length from width d) large from small
(96) In synfig, what is used for interchanging parameter ?
a) Before b) After c) Time d) Length
(97) Which value of amount in synfig suggests completely transparent layer ?
a) 1 b) 0 c) -1 d) 2
(98) Which value of parameter Before suggests that layer had been visible in parameter time ?
a) 0.0 b) 1.0 c) 0.1 d) 1.1
(99) Which value of parameter After suggests that in time suggested layer had been visible ?
a) 0.0 b) 1.0 c) 0.1 d) 1.1
(100) Which parameter should have value 1s if the transition time is to be kept one second?
a) Time b) Length c) Transition d) parameter
(101) What will happen if Time parameter is assigned value 5s ?
a) Every Image will start appearing five seconds earlier
b) Image will be seen after every seconds
C) Image will become invisible after five seconds
D) Image will become invisible before five seconds
(102) If it is desired to see a picture every five seconds, which parameter should be assigned value 5s ?
a) parameter b) Transition c) Length d) Time
(103) what is seen in synfig slide show when slightly more time is set than the last moment ?
a) Blank screen is seen b) white screen is seen
c) slide show begins again d) slide show continues longer
(104) What is full form of fps ?
a) File per second b) form per second c) frame per second d) frameset per second
(105) What is done to all image layers if background is to be shown in slide show ?
a) uniform b) Encapsulate c) Divided d) Transform
(106) As which layer is background kept in slide show ?
a) As first layer b) As middle layer c) AS the lowest layer d) Any of the given
11EM Computer Subject : Lesson-5 Using Pictures in Synfig 4
 (107) Which of the following parameter is assigned to only encapsulated layer ?
a) Blend, Amount b) Z Depth, Amount c) Blend, Invert d) Amount, Invert
(108) By which of the following parameter can visibility of image be managed ?
a) Blend, Amount b) mask , Amount c) Blend, Invert d) Amount, Invert
(109) What kind of information can be added to slide show with a picture ?
a) Function b) Mathematical c) Verbal d) Universal
(110) To add what to animation programme is animation script is added ?
a) Flexibility b) suitability c) Both (a) and (b) d) variety
(111) In which format is animated picture rendered file is there in synfig ?
a) gif b) jpeg c) bmp d) All of these
(112) In what can animation file be converted for further use, when earlier made by specific animation software ?
a) Adobe flash file b) Adobe pagemaker c) Adobe Photoshop file d) coral draw file
(113) For which of the following graphics animation is SWF formatting of Adobe Flash File used ?
a) Image graphics b) Master graphics c) vector graphics d) Raster graphics
(114) Which of the following may be more efficiently used later by converting into which file format ?
a) SWA b) SWF c) FLA d) FLV
(115) What type of task can be done by SWFTOOLS ?
a) To read SWF files b) To connect SWF files
c) programmes for making file from image, sound, video files d) All of these

11EM Computer Subject : Lesson-5 Using Pictures in Synfig 5

 Standard:-11 6.Basic Ubuntu Linux Commands
(01) Which window is there in Linux for opening command line consol in Linux graphical interface?
a) Test window b) Term window c) Terminal window d) Term shell window
(02) Which window provides the look and response of a dedicated text monitor a graphical display?
a) Term window b) Terminal window c) Term shell window d) Test window
(03) To open a terminal window, select .
a) Start/ Accessories/ Terminal b) Application/ Accessories /Term window
c) Application/ Terminal window d) Applications / Accessories / Terminal
(04) To open a terminal window, press .
a) Ctrl + Alt + t b) Ctrl + Alt + p c) Shift + Ctrl + t d) Ctrl + Alt + k
(05) types of interfaces are important.
a) Command & Graphical b) command & file
c)Graphical & user d) Graphical & folder
(06) What is the full form of CLI?
a) Command line interline b) command line interface
c)Command line interaction d) command line interchange
(07) What is the full form of GUI?
a) Graphical used interface b) Graphical user interchange
c) Graphical user interface d) Graphical user interface
(08) Which approach, allows us to access the real power of Linux with great understanding, uniformity and efficiency ?
a) Command line interface b) Graphical user interface
c) Both (a) & (b) d) none of these
(09) In Linux, $ and # symbols are known as .
a) Command line b) command interface c) command user d) command prompt
(10) In command prompt, the first word in the string of character is .
a) Password b) username c) directory name d) all of these
(11) In command prompt, the first word in the string of characters is username followed by the symbol .
a) # b) @ c) ! d) $
(12) Home directory represented by a symbol.
a) # b) ~ c) ! d) $
(13) is a program that accomplishes certain task.
a) Algorithm b) shell c) Flowchart d) commands
(14) is a user program or an environment provided for user interaction.
a) Commands b) Graphical c) shell d) Algorithm
(15) Which of the following is a command language interpreter ?
a) algorithm b) shell c) Flow chart d) command
(16) Command language interpreter shell performs .
a) Accept / issues command b) understands command
c) talks to the kernel to execute it d) all of these
(17) Which shells are available on command line interface ?
a) Text b) character c) Numerous d) Financial
(18) Which popular shells available on command line interface ?
a) Bourne shell (sh) b) C shell (csh and tcsh)
c) korn shell (ksh) & bash shell (sh) d) all of these
(19) Which shell is the earliest unix shell used as command line interface ?
a) C shell (csh and tcsh) b) Bourne shell (sh) c) Bash shell d) korn shell (ksh)
(20) Which shell provides basic mechanisms for shell script programming ?
a) Korn shell (ksh) b) Bash shell (sh) c) Bourne shell (sh) d) C shell (csh and tcsh)
(21) Which shell allows us to write a program based solely on commands ?
a) Bourne shell (sh) b) Korn shell (ksh) c) C shell (csh and tcsh) d) Bash shell (sh)
(22) What is the acronym of Bourne shell ?
a) Ksh b) sh c) csh d) tcsh
(23) What is the acronym of korn shell ?
a) tcsh b) csh c) sh d) ksh
(24) what is the acronym of C shell ?
a) Csh b) tcsh c) Both (a) and (b) d) sh
(25) What is the acronym of Base shell ?
a) tcsh b) sh c) csh d) ksh

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 1

 (26) which shell was developed to use C programming syntax.
a) Korn shell (ksh) b) Bash shell (sh) c) Bourne shell (sh) d) C shell (csh)
(27) Shell programming can be done using programming syntax .
a) C b) HTML c) java script d) all of these
(28) Which is the newer version of csh ?
a) bcsh b) kchs c) tchs d) dchs
(29) which shell provides additional shell script programming features to add the limitations of csh ?
a) Ksh b) tchs c) sh d) pdksh
(30) Which shell was developed to combine the features of the sh and csh ?
a) Korn shell (ksh) b) Bash shell (sh) c) Bourne shell (sh) d) C shell (csh)
(31) Which is the newer version of bourne shell ?
a) Bosh shell b) C shell c) Korn shell d) Bash shell
(32)Bash shell allows .
a) Account configuration
b) For easier and sophisticated command
c) Shell scripted command
d) All of these
(33) Which is considered to be the standard shell for Linux systems ?
a) Bash shell b) Korn shell c) C shell d) Bourne shell
(34) Which shell is commonly used and available on all Linux operating system ?
a) Bourne shell b) C shell c) Korn shell d) Bash shell
(35) is to execute it and display result as per given instruction.
a) Kernel b) shell c) command d) Bash shell
(36) Which command used to find all available shells in system ?
a) Cat / etc / shell b) cat /etc/shells c) cat / atc / shell d) cat / atc / shells
(37) Linux is sensitive.
a) Case b) command c) user d) line
(38) Linux operating system comes with certain .
a) Algorithm b) program c) variable d) all of these
(39) In Linux, the value of current default shell is stored in environment variable named .
a) SHALL b) SHELL c) SHOW d) SOURCE
(40) Which command is use to determining the default shell ?
a) echo SHELL b) echo $SHELL c) echo $shell d) SHELL
(41) which command used to display the value of any variable ?
a) echo b) path c) man d) cat
(42) to return default shell, type exit or press _ at the command prompt of new shell.
a) Ctrl + d b) ctrl + p c) ctrl + s d) ctrl + r
(43) The syntax of Linux commands consists of parts.
a) Two b) three c) four d) five
(44) What is the syntax of Linux commands ?
a) Name b) options c) Argument d) All of these
(45) In Linux, command name followed by necessary .
a) Options b) arguments c) both a & c d) none of these
(46)Which key execute the command in Linux ?
a) ESC b) Enter c) Tab d) Ctrl + Enter
(47) Option when present starts with a and are usually a single letter or a digit.
a) # b) $ c) % d)
-
(48) Linux command can be classified into .
a) 1 b) 2 c) 3 d) 4
(49) Linux command as or .
a) Internal b) external c) (a) and (b) d) binary
(50) The command that have a binary file explicitly stored either
a) /sbin,/usr/sbin b) /usr/bin ,/bin c) /usr/local/bin d) All of these
(51) Binary file are generally executed by the kernel and will generate a at the time of execution.
a) Binary id b) process id c) command id d) All of these
(52) Commands directly executed by the shell are called .
a) Internal b) external c) (a) and (b) d) binary
(53) Most of the command that we use in Linux are command.
11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 2
 a) Internal b) external c) (a) and (b) d) binary

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 3

 (54) To know whether a command is internal or external we can use the command.
a) Type b) cat c) mkdir d) cd

(55) Which command is use to know internal or external we can use the command.
a) type info b) cat info c) mkdir info d) All of these
(56) Which is the best way to start with learning Linux commands ?
a) General purpose commands b) General property command
b) General public commands d) Graphical user commands
(57)By pressing key after typing first few letters of a command, shell automatically provides the remaining
information
a) Enter Key b) Shift Key c) Ctrl Key d) Tab key
(58) Which command used to displays the calendar of any specific month or entire year ?
a) calendar b) cale c) cal d) calc
(59) which command displays the calendar of june 2013 ?
a) Cal 2013 06 b) cal 06 2013 c) cal june 2013 d) cal 2013 june
(60) Which command displays the calendar of entire year of 2013 ?
a) Cal latest b) cal year c) cal 09 d) cal 2013
(61) Which command displays the entire year of 2013’s calendar view as single screen page at a time ?
a) cal 2013 | more b) cal 2013 | display c) cal 2013 | view d) cal 2013 | show
(62) which command takes input from the cal command in Linux ?
a) Date b) more c) base d) sqrt
(63) In Linux, which command displays current system date and time ?
a) current b) now c) latest d) date
(64) which command can be used with suitable format specification as arguments ?
a) pwd b) man c) current d) date
(65) in date command, each format is preceded by symbol.
a) + b) - c) % d) #
(66) operator and a single character describing the format.
a) + b) % c) $ d) #
(67) in Linux, date command display only the current date in format.
a) dd/mm/yy b) mm/dd/yyyy c) dd/mm/yyyy d) mm/dd/yy
(68) which command displays only the current date ?
a) date +%D b) date +d c) date + “$d” d) date +$d
(69) which command in Linux is a command line calculator performs .
a) ac b) dc c) bc d) nc
(70) in Linux, command line calculator performs .
a) Number of scientific math functions b) conversions between diff. number system
c) run programs d) all of these
(71) Which type of math functions performs bc command ?
a) Addition, subtraction b) multiplication, division, modulus
c) exponents, sine, cosine, logarithm d) All of these
(72) Which command used to find out the natural logarithm of 2013 ?
a) l(2013) b) log(2013) c) nlog(2013) d) naturallog(2013)
(73) which function allows user to set numbering system to use for input ?
a) Inputbase b) iputbase c) ibase d) inbase
(74) Which function allows user to set numbering system to use for output ?
a) outbase b) obase c) outputbase d) oputbase
(75) which function used to find out the square root of 9 ?
a) s(9) b) sq(9) c) sqrt(9) d) sqroot
(76) the importance of be calculator over graphical calculater .
a) Speed b) flexibility
c) power to perform math operation d) all of these
(77) Which command used to return the command prompt ?
a) Ctrl + d b) ctrl + e c) ctrl + c d) ctrl + r
(78) Which command used to display a message on the terminal ?
a) echo b) each c) print d) shell
(79) which command used to display value of variable.
a) echo b) each c) print d) shell

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 4

 (80) which symbol represents a variable.
a) $ b) @ c) ! d) *
(81) Which command used along with other commands to give meaningful output ?
a) echo b) each c) print d) shell

(82) Back quotes available on key with sign.

a) $ b) ~ c) ! d) *
(83) Which command used to change the password of the current login account ?
a) Password b) pword c) passwd d) psd
(84)Which command used to change the password of other user of the system by specifying the nimesh(username)
after the passwd ?
a) password nimesh b) pword nimesh c) passwd nimesh d) passwd nimesh
(85) which command used use to remove data on the screen ?
a) clear b) delete c) remove d) clear screen
(86)Linux provide two inbuilt command namely and to assist the user while working on the
command line interface.
a) Help, get b) help, man c) help, assist d) get, man
(87) Which is correct to get help on the mv command using linux online manuals ?
a) mv --help b) mv --get c) mv help d) mv --helps
(88) command gives us exhaustive information of a command and may run into multiple screen.
a) man b) help c) --man d) --helps
(89) Press key to scroll down the content.
a) f b) shift c) Enter d) q
(90) Which command activates manual corresponding to a specific command ?
a) Look b) Locate c) search d) man
(91) Which key is used to take you to the command prompt?
a) f b) shift c) Enter d) q
(92) Which command is used to get small description of a command?
a) whatis b) man c) helpr d) all of these
(93) Which command is used to get one line explanation of the command and omits any additional information ?
a) whatis b) man c) helpr d) all of these
(94) In a situation when exact command is not known, command can be used.
a) apropos b) man c) helpr d) all of these
(95) Who represent an information entity, which can be used for variety of purpose ?
a) folder b) command c) file d) all of these
(96) In Linux, is a special type of file that contains files and other directories.
a) folder b) directory c) file d) command
(97) When user log on the system, Linux automatically places in which directory ?
a) base b) right c) recent d) home
(98) directory is created by the system when user account is opened.
a) Home directory b) Base directory c) Recent directory d) working directory
(99) is the default working directory at the time of log on in system variable.
a) BASE b) POWER c) HOME d) MAIN
(100) path name is simply a sequence of directory names separated by slash.
a) user b) Absolute c) Base d) Home
(101) In absolute path name, directory names are separated by .
a) \ b) | c) # d) /
(102) Which type of information display an absolute path name ?
a) file’s location with reference b) files’s location with detail
c) file’s location with area d) file’s location with account
(103) Which command used to display the current working directory ?
a) pswd b) pword c) pwd d) passvvd
(104) Directories in Linux can be created using command.
a) make b) mkdir c) makedir d) mdir
(105) mkdir command can be followed with the names of the directories to be .
a) modify b) edited c) group d) created
(106) which command can be used to create a directory named nimesh ?
a) mkdir nimesh b) mk nimesh c) dir nimesh d) md nimesh

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 5

 (107) to create multiple directory named nimesh, tanisi, dhatri, which commad can be used ?
a) md nimesh tanisi dhatri b) mk nimesh tanisi dhatri
c) mkdir nimesh tanisi dhatri d) dir nimeshtanisi dhatri
(108) which command used to change directory ?
a) cd b) cd .. c) change d) cdir
(109) which command used to comeback to previous directory ?
a) change b) cdir c) cd d) cd ..
(110) in cd .. command, double dot (..) stands for the directory.
a) child b) parent c) base d) main
(111) if your current working directory is home/data/nimesh/dhatri and to change it to home directory, which
command used ?
a) cd .. b) cd ../../ c) cd ../../../ d) cd ../../../../
(112) which command used for change directory to /home/username/Desktop, from any current path ?
a) cd ~/Desktop b) cd /Desktop c) cd */Desktop d) cd &/Desktop
(113) which symbol refer to home directory of the user ?
a) * b) / c) ~ d) &
(114) which command is used to change directory to the root directory from any current path ?
a) cd / b) cd c) cd - d) cd ..
(115) which command is used to change directory to the home directory from any current path?
a) cd/ b) cd c) cd - d) cd ..
(116) which command is used to change directory to the previously changed directory ?
a) cd/ b) cd c) cd - d) cd ..
(117) An empty directory can be deleted by using the command .
a) rmdir b) rm c) delete d) remove all
(118) To delete a non-empty directory with all its contents we can use the command.
a) rmdir b) rm –all c) rm –r d) rm -d
(119) In Linux, a file name can consist of up to characters.
a) 64 b) 102 c) 144 d) 255
(120) Linux can practically consist of any ASCII character except the character.
a) backslash b) Null c) both a and b d) none of these
(121) What is the full form of ASCII ?
a) American standard Code for information interchange
b) American standard Course for information interchange
c) American standard Code for interchange information
d) American standard Code for international information
(122) types of character are permitted for file name.
a) Any control character b) Non-printable character
c) both a and b d) none of these
(123) is the valid file names in Linux.
a) .file1 & file2. b) ^file^-++ & -{} () c) test$# & ab.cd.ef d) all of these
(124) Which character recommended for file name ?
a) alphabetic character b) numerals & period (.)
c) hyphen (-) & underscore (_) d) All of these
(125) Linux is case sensitive.
a) incorrectly b) wrongly c) strictly d) inexactly
(126) Which command used to display the contents of a small file on the terminal ?
a) cat b) cal c) cel d) can
(127) What is the use of cat command ?
a) create a file b) concatenate two files
c) appending contents to a file d) all of these
(128) In Linux, which key indicates the end of file character ?
a) Ctrl + c b) Ctrl+ d c) Ctrl + x d) Ctrl + a
(129) Which command used to create a file named nms ?
a) cal > nms b) cet > nms c) can> nms d) cat > nms
(130) In Linux, cat > nimesh command, > symbol is known as operator.
a) redirection b) relational c) logical d) parameter
(131) Which command used to append content in an existing file ?
a) cal >> nms b) cet >> nms c) can >> nms d) cat >> nms

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 6

 (132) Which command used to create file3 that contains the text of both the files namely file1 and file2 ?
a) cat file1 file2>file3 b) cat file1 file2 file3 c) cat > file1 file2 file3 d) cat file1> file2 file3
(133) The command is used to delete/remove one or more files.
a) rm b) rmdir c) delete d) remove
(134) Which command will be used to delete files test1, test2, test3 ?
a) rm test1 test2 test3 b) rm test1, test2, test3 c) m test1 test2 test3 d) m test1, test2, test3
(135) Which command will be used to delete all the three files test1, test2, test3 as argument ?
a) rm test ? b) rm test* c) rm [test] d) rm [test1-test3]
(136) Which command will be used to delete all the files from the current directory ?
a) rm ? b) rm ?* c) rm [*1 d) rm *
(137) Which command is used to delete file using interactive mode and the user will be asked to verify the delete
operation?
a) rm –i filename b) rm –r filename c) rm –r * d) rm -rf
(138) Which command is used to delete directory and along with all its contents ?
a) rm –i filename b) rm –r dirname c) rm –r * d) rm –rf *
(139) Which command is used to delete all contents within the current directory ?
a) rm –i filename b) rm –r filename c) rm –r * d) rm -rf
(140) Which command is used to deletes the contents even if it is write protected ?
a) rm –i filename b) rm –r filename c) rm –r* d) rm –rf *
(141) is a wildcard character.
a) * b) / c) - d) %
(142) The command gives us the list of the contents in the current or a specified directory.
a) rm b) ls c) dir d) list
(143) symbol is treated as hidden file.
a) . b) .. c) / d) *
(144) command used to create hidden file.
a) cat >
b) .intro b) cat>intro c) cat>*intro d) cat>-intro
(145) entries are automatically created in the directory whenever the directory is created.
a) 4 b) 3 c) 2(. and ..) d) 6
(146) Which command is use to lists the files that are in user’s home directory ?
a) ls ~ b) ls [svics]* c) ls [n-s][5-7]?? d) ls -r
(147) Which command is use to lists all the files in which the first character of the filename matches with any of the
given alphabets within the square brackets the remaining part of file name can contain any valid ASCII character?
a) ls ~ b) ls [svics]* c) ls [n-s][5-7]?? d) ls -r
(148) Which command is use to lists all file with 4 character filename with the condition that the first character is in
the range n to s, second character is in the range of 5 to 7, whereas the third and fourth characters are any valid
ASCII character?
a) ls ~ b) ls [svics]* c) ls [n-s][5-7]?? d) ls -r
(149) Which command is use to list the files by sorting them in reverse order ?
a) ls ~ b) ls [svics]* c) ls [n-s][5-7]?? d) ls -r
(150) Which command is use to list the file sorting them based on their modification time ?
a) ls -t b) ls -F c) ls -l d) ls -r
(151) Which command is use to list the files and mark all executable file with * and directories with / symbol ?
a) ls -t b) ls -F c) ls -l d) ls -r
(152) Which command is use to list one per line ?
a) ls -t b) ls -F c) ls -1 d) ls -r
(153) Which wildcard characters used for matching a pattern as per requirement ?
a) * b) ? c) = d) (a) and (b)
(154) Which wildcard use to match any number of characters including none ?
a) * b) ? c) [abc] d) [!abc]
(155) Which wildcard characters used for a single character ?
a) * b) ? c) [abc] d) [!abc]
(156) Which wildcard characters used for a single character either a, b or c ?
a) [ab]c b) [abcd] c) [abc] d) [!abc]
(157) Which wildcard characters used for match single character other than a, b or c ?
a) * b) ? c) [abc] d) [!abc]
(158) Which wildcard match any single character within the ASCII range of the characters p to s.
a) [p-s] b) [!p-s] c) [p*s] d) [p#s]
11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 7
 (159) Which wildcard use a single character that is not within the ASCII range of the characters p to s ?
a) [p-s] b) [!p-s] c) [p*s] d) [p#s]
(160) Which command will be used to create a copy of file called nimesh with new file shelat ?
a) copy shelat nimesh b) copy nimesh shelat c) cp shelat nimesh d) cp nimesh shelat
(161) Which command will be used to copy files test1, test2, test3 to the directory named nimesh ?
a) cp nimesh test1 test2 test3 b) cp nimesh test1, test2, test3
c) cp test1 test2 test3 nimesh d) copy test1 test2 test3 nimesh
(162) Which command copies a file or group of files ?
a) cp b) copy c) photocopy d) duplicate
(163) cp command creates an exact image of a file on the disk with a file name.
a) same b) special c) different d) extra
(164) cp command needs arguments.
a) two b) three c) four d) five
(165) in cp command, which is the first argument ?
a) destination file b) source file c) (a) or (b) d) none of these
(166) in cp command, which is the second argument ?
a) destination file b) source file c) (a) or (b) d) none of these
(167) which command will be used to rename a file or directory ?
a) rename b) mv c) move d) rd
(168) To rename the me nimesh to shelat, which command will be used ?
a) mv nimesh shelat b) mv shelat dhatri c) move nimesh shelat d) m nimesh dhatri
(169) Which command will be used to move files test1, test2,test3 to the directory named nimesh ?
a) mv test1, test2, test3 nimesh b) move test1 test2 test3 nimesh
c) mv test1 test2 test3 nimesh d) mv tejas test2 test3 nimesh
(170) Which command will be used to rename a directory named Ahmedabad to Amdavad ?
a) inv Ahmedabad, Amdavad b) mv Ahmedabad Amdavad
c) mv Amdavad ,Ahmedabad d) mv Amdavad Ahmedabad
(171) Which command is used to view one page contents on the screen at a time ?
a) more b) move c) page d) view
(172) The more command can be used to display the contents of file .
a) width wise b) name wise c) type wise d)page wise
(173) Which key is used to view the previous pages in more command ?
a) f b) b c) p d) m
(174) Which key is used to view the next pages in more command ?
a) m b) p c) b d) f
(175) To view the file nimesh.txt as page wise, which command will be used ?
a) more nimesh.txt b) move nimesh.txt c) page nimesh.txt d) pagewise nimesh.txt
(176) Which command is used to compares two files of any type and writes the result to the standard output ?
a) diff b) cmp c) more d) compare
(177) The extension of the cmp command is the command.
a) diff b) cmp c) more d) compare
(178) The command compares two files and displays the contents of both files indicating where the difference
lies.
a) diff b) cmp c) more d) compare
(179) Which command will be used to count the number of lines, words and characters in the specified file or files?
a) wf b) wa c) wc d) wl
(180) wc command comes with options.
a) two b) three c) four d) five
(181) with which options wc command is used ?
a) -l b) -w c) -c d) All of these
(182) which option will be used for counting lines with wc command ?
a) wc -I b) wc -c c) wc -a d) wc -w
(183) which option wil be used for counting words with wc command ?
a) wc -c b) wc -a c) wc -w d) wc -I
(184) which option will be used for counting a character with wc command ?
a) wc -a b) wc -c c) wc -I d) wc -w
(185) to count the number of lines in file nimesh.txt, which command will be used ?
a) wc -l nimesh.txt b) wc nimesh -l c) wc -l nimesh.txt d) wc -l / nimesh.txt

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 8

 (186) to count number of words in file nimesh.txt, which command will be used ?
a) wc –w / nimesh.txt b) wc –w, nimesh.txt c) wc nimesh.txt –w d) wc –w nimesh.txt
(187) To count number of characters in file nimesh.txt, which command will be used ?
a) wc –c, nimesh.txt b) wc –c nimesh.txt c) wc nimesh.txt / -w d) wc –w / nimesh.txt
(188) Which command is equivalent to wc –l –w –c nimesh.txt ?
a) wc –lwc, nimesh.txt b) wc –lwc / nimesh.txt c) wc –lwc nimesh.txt d) wc –l, -w, -c nimesh
(189) An object can be categorized as a .
a) regular file b) a directory c) process d) all of these

(190) The character in the first column refer to a file.

a) - b) * c) d d) all of these
(191) The character in the first column refer to a directory.
a) - b) * c) d d) all of these
(192) An object in linux has permissions.
a) 1 b) 2 c) 3 d) 4
(193) Which character option means to permit it to write the file ?
a) w b) p c) x d) r
(194) Which character option means to permit to execute the file ?
a) p b) e c) x d) w
(195) Which symbol will be used to any position when the user doesn’t have that particular permission ?
a) asterisk (*) b) hyphen (-) c) question mark(?) d) hash (#)
(196) The set of three characters after the file type show in column tells which permission the owner of the
file has.
a) 2 to 4 b) 5 to 7 c) 8 to 10 d) 11 to 13
(197) The set of three characters after the file type show in column tells which permission the group of the
file has.
a) 2 to 4 b) 5 to 7 c) 8 to 10 d) 11 to 13
(198) The set of three characters after the file type show in column tells which permission the other user or
group the file has.
a) 2 to 4 b) 5 to 7 c) 8 to 10 d) 11 to 13
(199) We use number system for representing permission as numeric value.
a) octal b) decimal c) binary d) all of these
(200) Which octal number allow no permission assigned ?
a) 0 b) 1 c) 2 d) 3
(201) Which octal number allow only execute access ?
a) 0 b) 1 c) 2 d) 3
(202) Which octal number allow only write access ?
a) 0 b) 1 c) 2 d) 3
(203) Which octal number allow write and execute access ?
a) 0 b) 1 c) 2 d) 3
(204) Which octal number allow only read access ?
a) 4 b) 5 c) 6 d) 7
(205) Which octal number allow read and execute access ?
a) 4 b) 5 c) 6 d) 7
(206) Which octal number allow read and write access ?
a) 4 b) 5 c) 6 d) 7
(207) Which octal number allow everything ?
a) 4 b) 5 c) 6 d) 7
(208) Which command used to change the permission of a file ?
a) chmod b) change c) permission d) command
(209) To make nimesh.txt file into read only file, which command will be used ?
a) chmod ugo-r nimesh.txt b) chmod ugo-o nimesh.txt
c) chmod ugo-w nimesh.txt d) chmod vgo-w nimesh.txt
(210) What is the meaning of ugo, in chmod ugo-w nimesh.txt permission command ?
a) user, group, open b) user, group, owner c) user, group, operator d) user, group, option
(211) Which command will be used to give nimesh.txt file write and execute permission ?
a) chmod u+wx nimesh.txt b) chmod u+go nimesh.txt
c) chmod u+xy nimesh.txt d) chmod v+vx nimesh.txt

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 9

 (212) Which sign is used to assign a permission ?
a) * b) + c) - d) &
(213) Which sign is used to remove permission ?
a) * b) + c) - d) &
(214) Linux considers as its standard input device.
a) keyboard b) mouse c) scanner d) pen drive
(215) Linux considers as its standard output device.
a) printer b) plotter c) monitor d) speaker
(216) If any command is executed in Linux, its input will be taken from the .
a) keypad b) mouse c) Enter d) keyboard

(217) If any command is executed in Linux, its output will be displayed on the
a) speaker b) monitor c) plotter d) printer
(218) symbol implies redirection of output.
a) > b) < c) >> d) <<
(219) symbol implies redirection of input.
a) > b) < c) >> d) <<
(220) Which symbol implies redirection of output telling Linux not to display output on the screen but put it
somewhere else ?
a) > b) < c) $ d) &
(221) Which symbol implies redirection of input telling Linux not to accept the in from the keyboard but accept it from
somewhere else ?
a) & b) # c) < d) >
(222) Which command is used to store the list of files present in current directory into a file ?
a) ls < list b) ls > list c) ls << list d) ls >> list
(223) Which facility of Linux helps in connecting commands with other command ?
a) Execute b) Base c) Direction d) Piping
(224) Using a pipe symbol (|) output of one command can be supplied as input for another command and this process
is known as in Linux.
a) direction b) jointing c) piping d) concoting
(225) Which command accept data from standard inputs, manipulate it and write the results to standard output ?
a) Filters b) Users c) writers d) Beginners
(226) Linux comes with filters.
a) head & tail b) cut & paste c) sort & uniq d) All of these
(227) The command display the beginning lines of the file.
a) title b) head c) body d) input
(228) Which command will be used to display first ten lines of the nimesh.txt file ?
a) nimesh.txt head b) head nimesh.txt ten c) head nimesh.txt d) head nimesh.txt+10
(229) Which command will be used to display first three lines of the nimesh.txt file ?
a) head +3 nimesh.txt b) head -3 nimesh.txt c) head nimesh.txt +3 d) head nimesh.txt -3
(230) Which command will be used to display the lines from the end of file ?
a) tail b) end c) last d) final
(231) The tail command will be used to display last lines by default.
a) eight b) nine c) ten d) eleven
(232) Which command will be used to find last ten lines from the nimesh.txt file ?
a) tail nimesh.txt -10 b) tail nimesh.txt +10 c) tail | nimesh.txt d) tail nimesh.txt
(233) Which command will be used to display last five line of the nimesh.txt file ?
a) tail -5 nimesh.txt b) tail +5 nimesh.txt c) tail nimesh.txt -5 d) tail nimesh.txt +5
th
(234) Which command will be used to display lines from 5 line onwards ?
a) tail -5 nimesh.txt b) tail +5 nimesh.txt c) tail nimesh.txt -5 d) tail nimesh.txt +5
(235) Which command will be used to extract specific characters from each line of the file ?
a) cut b) copy c) paste d) connect
(236) Which command will be used to extract columns from 20 onwards of nimesh.txt file ?
a) cut +c 20- nimesh.txt b) cut -c 20+ nimesh.txt c) cut -c 20- nimesh.txt d) cut +c 20+ nimesh.txt
(237) Which command will be used to extract characters till third character from beginning of the line ?
a) cut +c -3 filename b) cut -c -3 filename c) cut -c +3 filename d) cut +c +3 filename
(238) Which option is useful for fixed length lines ?
a) –c b) –d c) –e d) –f

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command 1

(239) Which option is useful to specify field numbers to be displayed ?
a) –c b) –d c) –e d) -f
(240) Which option is useful to specify delimiter appearing in a command ?
a) –c b) –d c) –e d) -f
(241) Which command is a way of pasting two file together ?
a) paste b) joint c) dual d) command
(242) Which command will be used to order the data in ascending or descending sequence ?
a) arrange b) sequence c) sort d) type
(243) By default, sort command reorders lines in collating sequence.
a) ascending b) descending c)uppercase d) ASCII
(244) In ASCII, sorting first applies on .
a) whitespace, numerals, uppercase, lowercase
b) whitespace, uppercase, lowercase , numerals
c) numerals , uppercase, lowercase , whitespace
d) whitespace, numerals, lowercase , uppercase
(245) The order is applied only at the time of displaying the output.
a) sort b) cut c) paste d) head
(246) Which command will be used to translate string or patterns from one set of characters to another ?
a) transfer b) transition c) tracking d) translate (tr)
(247) The option squeezes the additional space visible in the actual file.
a) –r b) –s c) –p d) -a
(248) Which command comes from a command in the Unix text editor -ed-, which is used to search a pattern ?
a) grep b) gerp c) grop d) grpo
(249) What is the use of grep command in Linux ?
a) whole host of tricks & magic b) as a filter or to look inside files
c) as regular expressions d) all of these
(250) Which command will be used to display the details of student named “SHELAT” from the nimesh.txt file ?
a) grpe “SHELAT” nimesh.txt b) grep “SHELAT” nimesh.txt
c) grop “SHELAT” nimesh.txt d) greep “SHELAT” nimesh.txt
(251) In GUI applications, use key combination to find keyword within files.
a) ctrl + f b) ctrl + h c) ctrl + s d) ctrl + q
(252) The string that we are looking for is show in line colour.
a) red b) green c) white d) yellow
(253) It is compulsory to enclose the keyword in double quotes. Yes or No ?
a) yes b) no c) (a) and (b) d) none of these
(254) Which option used to return only number of matches without quoting the text ?
a) -c b) -i c) -l d) -n
(255) Which option used to ignore case while searching ?
a) -c b) -i c) -l d) -n
(256) Which option used to return the only file names containing a match without quoting the text
a) -c b) -i c) -l d) -n
(257) Which option used to return the line number of matched text as well as the text itself ?
a) -c b) -i c) -l d) -n
(258) Which option used to return all the lines that do not match the text ?
a) -v b) -w c) -o d) -n
(259) Which option used to return lines which display only whole words ?
a) -v b) -w c) -o d) -n
(260) Which option used to shows only the matched string ?
a) -v b) -w c) -o d) -n
(261) We want detail about the person who are staying in society that has ‘Jal’ as it’s starting and ‘I’ as its end, then
which expression can be used ?
a) grep “Jal.*I” address.txt b) grep “Jal.I” address.txt
c) grep “*I.Jal” address.txt d) grep “Jal.I” address.txt
(262) A regular expression is normally followed by one of several operators.
a) regular b) repetition c) not regular d) all of these
(263) Which repetition operator is used if the preceding item is optional and matched at most once ?
a) ? b) * c) + d) {n}

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command

(www.verymicro.org)
(264) Which repetition operator is used if the preceding item is optional and matched zero or more time ?
a) ? b) * c) + d) {n}
(265) Which repetition operator is used if the preceding item will be matched one or more times ?
a) ? b) * c) + d) {n}
(266) Which repetition operator is used if the preceding item is matched exactly n number of times ?
a) ? b) * c) + d) {n}
(267) Which repetition operator is used if the preceding item is matched n or more number of times.
a) ? b) * c) + d) {n,}
(268) Which command helps to find the location of the file or a directory created earlier ?
a) find b) search c) name d) all of these
(269) When command is used without any other arguments displays the pathname of all the files and
directories in the present directory and all its subdirectories.
a) find b) search c) name d) all of these
(270) Which command is used to search all directory and subdirectories.
a) find / -type d b) find .mtime –l c) find . –mtime +1 d) find -executable
(271) Which command is used to search object modified within the past 24 hours ?
a) find / -type d b) find .-mtime -1 c) find . –mtime +1 d) find -executable
(272) Which command is used to search object modified more than 48 hours ago ?
a) find / -type d b) find .mtime –l c) find . –mtime +1 d) find -executable
(273) Which command is used to search for the executable file in current directory ?
a) find / -type d b) find .mtime –l c) find . –mtime +1 d) find -executable
(274) The administrative privileges are available to only a user know as .
a) superuser b) super teacher c) super root d) all of these
(275) To use superuser account when using the terminal, we need to add as a prefix to the command.
a) khado b) pado c) sudo d) mado
(276) Which command used to create a new user on the system ?
a) adduser b) passwd c) who d) addgroup
(277) Which command is used to change the password of any valid user of the system ?
a) adduser b) passwd c) who d) addgroup
(278) Which command is used to display the list of all the user that are presently logged into the machine ?
a) adduser b) password c) who d) addgroup
(279) Which command is used to add a new group ?
a) adduser b) passwd c) who d) addgroup
(280) Which command is used to delete a user from the system ?
a) adduser b) deluser c) who d) addgroup
(281) Which command is used to deletes a group from the system ?
a) adduser b) passwd c) who d) delgroup

11EM Computer Subject : Lesson-6 Basic Ubuntu Linux Command

(www.verymicro.org)
Standard:11 7 .Vim Editor And Basic Scripting
1. Shell scripts are commonly used by............
(a) operators (b)programmers (c)designer (d)accountants
2. Computer programmers commonly use shell scripts for.........
(a) Routine individual tasks (b)System administration tasks
(c)Both (a) and (b) (d)None of these
3. Which types of text editors available to serve the purpose of writing shell scripts.
(a) vi & vim (b)emacs , nano (c)pico, ed (d)All of these
4. Which types of graphical editors available to serve the purpose of writing shell scripts.
(a) Gedit (b)Kwriter (c)Both (a) and (b) (d)None of these
5. Gedit is a graphical editor available wih desktop environment.
(a) GNOME (b)GNORM (c)GNAME (d)GNOMES
6. To execute a command , user types it on prompt and press the Enter key.
(a) command (b)graphics (c)Both (a) and (b) (d)None of these
7. In Linux the output of the command available is displayed on the
(a) editor (b)graph (c)screen (d)shell script
8. Who will execute all the command available in the text file in a sequence?
(a) source (b)shell (c)editors (d)user
9. All the command available in the text file in a sequence is called as
(a) shell writer (b)shell editor (c)shell scripts (d)shell sequence
10. can be defined as series of command written in a plain text file.
(a) shell editor (b)shell writer (c)shell sequence (d)shell script
11. Gedit is a graphical editor available with desktop environment.
(a) KED (b)KAD (c)KDE (d)GNOME
12. Kwriter is a graphical editor available with desktop environment.
(a) KED (b)KAD (c)KDE (d)KOD
13. vim is editor.
(a) option display (b)visual display (c)form display (d)graphical display
14. The Vim is a text editor written by
(a) Bram Moolenaar (b)Brain Moolenaar (c)Mram Mool (d)None of these
15. The Vim text editor released publicity in...............
(a)1992 (b)1995 (c)1991 (d)1990
16. Into how many ways vim can be open?
(a)1 (b)2 (c)3 (d)4
17. It is a good option to start the vim editor by specifying a............
(a) path name (b) file name (c)drive name (d)byte name
18. To open vi editor, type....................
(a)vi and press Enter key (b)vi < filename> and press Enter
(c)vi < dir name> press Enter key (d) (a) or (b)
19. vi screen filled with..............sign on the left side of the screen.
(a) ˜ (b) # (c) | (d) $
20. What is the name of ˜ sign
(a) hash (b) turtle (c) tilde (d) tones
21. The last line is known as...................
(a) command line (b)GUI (c)Both (a) and (b) (d)None of these
22. Command line display the..............
(a) name of the file (b) total number of file (c) total number of column (d) all of these
23. The Vim editor function in......................different modes.
(a) 1 (b)2 (c)3 (d)4

Std-11EM Lesson-7 Vim Editor And Basic www.verymicro.co 1

 24. Which of the following is the mode of Vim.
(a) command mode (b) insert mode (c) last mode (d)all of these
25. An extension to the command mode is.............
(a) command mode (b) visual mode (c) (a) and (b) (d) none of these
26 mode is a flexible and easy way to select a piece of text from file.
(a) command mode (b) visual mode (c) (a) and (b) (d) none of these
27 command is used to switch to the visual mode.
(a) v (b) K (c) ctrl +v (d) none of these
28 command is used to switch to the visual mode.
(a) v (b)(a) and (c) (c) V (d) none of these
29 command is use for switch to the block-visual mode.
(a) v (b)V (c) ctrl + v (d) none of these
30. In an..........mode we can type text into our file or navigate within the file.
(a) insert mode (b)command mode (c) last mode (d)all of these
31. To toggle between the command mode and the insert mode , press.........key.
(a) Enter (b)Shift (c) Esc (d) Home key
32. Which command will be used to insert text before the current cursor position?
(a) a (b) i (c) A (d)I
33. Which command will be used to append text at the end of the current line?
(a) a (b) i (c) A (d)I
34. Which command will be used to append text at the end of the current line?
(a) a (b) i (c) A (d)I
35. Which command will be used to insert from the beginning of a line?
(a) a (b) i (c) A (d)I
36. Which command will be used to insert in a new line above the current cursor position?
(a) O (b) o (c) A (d)I
37. Which command will be used to insert in a new line below the current cursor position?
(a) O (b) o (c) A (d)I
38. The.mode normally is used for operations like quitting the Vim session or saving a file.
(a) command (b) insert (c) last line (d)none of these
39. In command mode , we can go to last line mode by pressing the.........key.
(a) $ (b) ? (c): (d) *
40. Which command is used to create a file using Vim editor?
(a) vi filename (b)vi_filename (c)(a) and (b) (d)none of these
41. By default , editor will start in the.......mode.
(a) command (b) insert (c) last line (d)none of these
42. The most commonly used command to get into insert mode are...........
(a) a and y (b) a and i (c) a and o (d) a and u
43. To save the file , switch to the............from the insert mode.
(a) command mode (b) last line mode (c) (a) and (b) (d)none of these
44. What is the use of : wq command in vi editor?
(a) write and quit (b)wait and quit (c)write and quick (d) work and quit
45. Which command will be used to save file and remain in editing mode?
(a) :w (b):wq (c) :x (d):q
46. Which command will be used to save file and quit editing mode?
(a) :wr (b) :wy (c) :wq (d):wp
47. Which command will be used to save file and quit editing mode?
(a) :w (b) :x (c) :!q (d):q
48. Which command will be used to quit editing mode when no changes are made.
(a) :q (b) :q! (c) :x (d) :x!

Std-11EM Lesson-7 Vim Editor And Basic www.verymicro.co 2

 49. Which command will be used to quit editing mode without saving change made in the file?
(a):x (b) :x! (c) :q (d) :q!
50. Which command will be used to save existing file new name and continue editing it under the new file
name.
(a) :x (b) :x! (c) :q (d):saveas
51. When vim editor is opened without typing file name , the text will be directly stored in the......
(a) system buffer (main memory) (b) local disk
(c) binary disk (d) none of these
52. To transfer the contents from the buffer to a hard disk we need to tyoe the file name along with the
......command.
(a) :x (b) :x! (c) :q (d):wq
53. In vi editor , which key will be used as a command to move the cursor in the four directions?
(a) a, b, c & d (b) h, i, j & k (c) h , j , k & I (d) u, V , w & x
54. Which command is used to move cursor in up direction?
(a) h (b) j (c) k (d) I
55. Which command will be used to move cursor in down direction?
(a) j (b)k (c)I (d)h
56. Which command will be used to move cursor left direction?
(a) I (b) j (c) k (d) h
57. Which command will be used to move cursor right direction?
(a) j (b)k (c)I (d)h
58. Which command will be used to move cursor right one space?
(a) j (b)k (c) spacebar (d) h
59. Which command will be used to move cursor down up in first column?
(a)-/+ key (b) ctrl + d (c) ctrl + u (d) ctrl + f
60. Which command will be used to scroll down one half of a page?
(a)-/+ key (b) ctrl + d (c) ctrl + u (d) ctrl + f
61. Which command will be used to
(a)-/+ key (b) ctrl + d (c) ctrl + u (d) ctrl + f
62. Which command will be used to scroll forward one page?
(a)-/+ key (b) ctrl + d (c) ctrl + u (d) ctrl + f
63. Which command will be used to scroll back one page?
(a) Ctrl + b (b) M (c)H (d) L
64. Which command will be used to move the cursor to middle of the page?
(a) Ctrl + b (b) M (c)H (d) L
65. Which command will be used to move the cursor top of the page?
(a) Ctrl + b (b) M (c)H (d) L
66. Which command will be used to move the cursor bottom of the page?
(a) Ctrl + b (b) M (c)H (d) L
67. Which command will be used to move the cursor to end of line?
(a)$ (b) ) (c) ( (d) G
68. Which command will be used to move the cursor to beginning of next sentence ?
(a)$ (b) ) (c) ( (d) G
69. Which command will be used to move the cursor beginning of current sentence ?
(a)$ (b) ) (c) ( (d) G
70. Which command will be used to move the cursor end of file?
(a)$ (b) ) (c) ( (d) G
71. Which command will be used to move the cursor one word at a time?
(a) W (b) Nw (c) B (d) b
72. Which command will be used to move the cursor ahead by N number of words?
(a) W (b) Nw (c) B (d) b
Std-11EM Lesson-7 Vim Editor And Basic www.verymicro.co 3
 73. Which command will be used to move the cursor back a word at a time ?
(a) W (b) Nw (c) B (d) b
74. Which command will be used to move the cursor back a word at time ?
(a) b (b) Nw (c) B (d)(a) and (c)
75. Which command will be used to move the cursor back by N number of words
(a) Nb (b) e (c) gg (d) 0
76. Which command will be used to move the cursor to end of word?
(a) Nb (b) e (c) gg (d)0
77. Which command will be used to move the first line of file?
(a) Nb (b) e (c) gg (d)0
78. Which command will be used to move the begining of the line?
(a) Nb (b) e (c) gg (d)0
79. Which command will be used to edit the document?
(a) vi filename(b) :wq filename (c) :x filename (d) :x filename
80. A user needs to toggle between the command and the.......mode while editing.
(a) command mode (b)last line mode (c) insert mode (d) none of these
81. Which command will be used to undo last change?
(a) u (b) U (c) dd (d) Ndd
82. Which command will be used to undo all changes to entire line?
(a) u (b) U (c) dd (d) Ndd
83. Which command will be used to delete line?
(a) u (b) U (c) dd (d) Ndd
84. Which command will be used to delete N number of line?
(a) u (b) U (c) dd (d) Ndd
85. Which command will be used to delete contents of line after cursor?
(a) D (b) C (c) dw (d)Ndw
86. Which command will be used to delete contents of line after cursor and insert new text?
(a) D (b) C (c) dw (d)Ndw
87. Which command will be used to delete one word?
(a) D (b) C (c) dw (d)Ndw
88. Which command will be used to delete N number of word?
(a) D (b) C (c) dw (d)Ndw
89. Which command will be used to change word?
(a) cw (b) x (c) X (d) r
90. Which command will be used to delete the character under the cursor?
(a) cw (b) x (c) X (d) r
91. Which command will be used to delete the character before the cursor(Backspace)?
(a) cw (b) x (c) X (d) r
92. Which command will be used to replace single character?
(a) cw (b) x (c) X (d) r
93. Which command will be used to overwrite character from cursor onward?
(a) R (b) s (c) S (d) ˜
94. Which command will be used to substitute one character under cursor and continue to insert?
(a) R (b) s (c) S (d) ˜
95. Which command will be used to substitute entire line and begin to insert at beginning of line?
(a) R (b) s (c) S (d) ˜
96. Which command will be used to change case of Individual character?
(a) R (b) s (c) S (d) ˜
97. Which command will be used to repeat last command action?
(a) R (b) s (c) . (d) ˜

Std-11EM Lesson-7 Vim Editor And Basic www.verymicro.co 4

 98. Which command will be used to copy single line into the buffer?
(a) yy (b) Nyy (c) p (d) s
99. Which command will be used to copy N line from current position into the buffer?
(a) yy (b) Nyy (c) p (d) s
100. Which command will be used paste contents of buffer after current line defined by current cursor
position?
(a) yy (b) Nyy (c) p (d) s
101. Which command will be used to search for text in a forward direction?
(a) / (b) ? (c) n (d) shift+n
102. Which command will be used to
(a) / (b) ? (c) n (d) shift+n
103. Which command will be used to search again in the same direction?
(a) / (b) ? (c) n (d) shift+n
104. Which command will be used to again in the opposite direction
(a) / (b) ? (c) n (d) shift+n
105. Which command will be used to character to be search for a character?
(a) f (b) shift + f (c) t (d)shift +t
106. Which command will be used to search character in backward direction?
(a) f (b) shift + f (c) t (d)shift +t
107. Which command will be used to moves the cursor one character before the specified character?
(a) f (b) shift + f (c) t (d)shift +t
108. Which command will be used to search in backward direction
(a) f (b) shift + f (c) t (d)shift +t
109. Which command will be used to substitute new_string for the first occurrence of the old_string in the
current line ?
(a) :s/old_string/new string (b) :s/old_string/new_string/g
(c) :%s/old_string/new_string/g (d) :%s/old_string/new_string/gc
110. Which command will be used to substitute new_string for the All occurrence of the old_string in the
current line ?
(a) :s/old_string/new_string (b) :s/old_string/new_string/g
(c) :%s/old_string/new_string/g (d) :%s/old_string/new_string/gc
111. Which command will be used to substitute new_string for the first occurrence of the old_string in the
whole file ?
(a) :s/old_string/new_string (b) :s/old_string/new_string/g
(c) :%s/old_string/new_string/g (d) :%s/old_string/new_string/gc
112. Which command will be used to substitute new_string for the all occurrences of the old_string in the file
and asks for confirmation before substitution the new_string ?
(a) :s/old_string/new_string (b) :s/old_string/new_string/g
(c) :%s/old_string/new_string/g (d) :%s/old_string/new_string/gc
113. To execute any Linux command we need to type the................symbol before the command.
(a) ! (b) $ (c) & (d) ^
114. Which command is used to see the current working directory?
(a) !pwd (b) @pwd (c) &pwd (d) *pwd
115...................will add the current date in a new line from the current cursor position.
(a) r *date (b) r !date (c) r %date (d) r *date
116. all the command available in the text file in a sequence is called as ...............
(a) shell writer (b) shell editor (c) shell script (d) shell sequence
117 can be defined as series of command writen in a plain text file.
(a) shell writer (b) shell editor (c) shell script (d) shell sequence
118 can be designed to be interactive.
(a) shell writer (b) shell editor (c) shell script (d) shell sequence
Std-11EM Lesson-7 Vim Editor And Basic www.verymicro.co 5
119. we can create the shell script using ...............
(a) text editor (b) browser (c) word processor (d) all of these
120. the extension..............is basically used to specify that file is a shell script.
(a) .script (b) .sh (c) .shell (d) none of these
121. The extension is .............
(a) Mandatory (b) not mandatory (c) (a) and (b) (d) none of these
122. Giving extension will help to differentiate between...............files and shell script file.
(a) shell (b) sh file (c) normal (d) all of these
123. In shell script, the first line begins with................sign.
(a) # (b) $ (c) @ (d) !
124. .............. is the symbol, which marks the beginning of the comment.
(a) & (b) $ (c) # (d) %
125.................in the script is not executed they are the messages that helps in understanding the script.
(a) Commands (b) Comments (c) Scripts (d) Program
126. which command will clear the screen in vi editor?
(a) clear (b) cis (c) clrscr (d) clean
127. to execute the script we need to use.............command.
(a) sh (b) bash (c) (a) and (b) (d) none of these
128. Which command will be used to assign execution permission to the file nimesh ?
(a) $chmod u-x nimesh (b) $chmad x+u nimesh
(c)$chmod u+x nimesh (d) $chmod u+x nimesh
129. In vim editor, the contents should be enclosed in.............quotes.
(a) single (b) double (c) simple (d) bracket
130. Command are not treated as message we enclose them in ................
(a) !! (b) { } (c) [ ] (d) ` `
131. the back quotes are printed on the key with............sign on the keyboard.
(a) & (b) ~ (c) * (d) $
132. Shell script variable like any other programming language variable are.............part of shell script.
(a) integral (b) external (c) Both (d) none of these
133. We can also display the value assigned to variable on the screen using.............command.
(a) print (b) echo (c) statement (d) none of these
134. The value stored in the...............can also be re-used or change as per user need.
(a) value (b) Statement (c) variable (d) none of these
135...............symbol extract the value store or assigned in the variable.
(a) # (b) $ (c) % (d) @
136. There should be.............space on either side of the equal to (=) symbol at the time of assigning a value.
(a) one (b) two (c) no (d) four
137. A variable name consist of .............
(a) alphabets (b) digit (c) underscore (d) all of these
138. No special character other than............allowed as part of variable name.
(a) , (b) - (c) _ (d) &
139. The first character of a variable name must either be an ...............
(a) alphabet (b) underscore (c) (a) or (b) (d) none of these
140. The...............command expects the user to key in the data on the standard input device.
(a) read (b) write (c) printf (d) echo
141. The..............option instructs the echo command not ot print a new line after the message is display.
(a) -s (b) -o (c) -n (d) -a
142. expr means ..............
(a) expression (b) exposed (c) exppriments (d) none of these
143. The contents written after.............are assumed to be operands and operators of an expression.
(a) expr (b) echo (c) read (d) none of these
Std-11EM Lesson-7 Vim Editor And Basic www.verymicro.co 6
144. There should be.............space between operator (+) and operands($num1,$num2.)
(a) one (b) two (c) three (d) four
145. To force one operation to be performed earlier tahn the other, we can enclose the opeartion in ............
(a) ( ) (b) { } (c) “ “ (d) [ ]
146. We need to prefix the multification(*) symbol with..............character.
(a) / (b) \ (c) % (d) $
147. Which command will be used to squeezed to single space?
(a) tr - f (b) tr -s (c) tr -a (d) tr -q
148. The shell script is a very..............tool of linux.
(a) powerful (b) meaningful (c) (a) and (b) (d) none of these
149. Repetitive task should be done using the ...............
(a) programming (b) shell script (c) machin language (d) all of these
150. The uses of Shell script are -
(a) create a new command using multiple set of commands
(b) automating many aspects of computer maintenance
(c) data backup (d) all of these
151. ubuntu Linux commands are executed ………….
(a) one at a time (b) teo at a time (c) many at a time (d) none of them
152. after typing the sequence of commands in a text file, this text file should be given............execution.
(a) kernel (b) linux shell (c) interpreter (d) compiler
153..............command is used to create a file.
(a) cat (b) Man (c) echo (d) pwd
154. The cat command although it allows us to create a file is not a...........option to use when creating a shell
script.
(a) good (b) worthy (c) possible (d) practical
155. In Linux output of the command is displayed on the …………..
(a) editor (b) graph (c) screen (d) shell script
156. What is the full form of Vim?
(a) Vi improved (b) virtual Important Machine
(c) Vi independent (d) very independ
157. Vim is enhanced version of which editor distributed with most UniX systems?
(a) ed (b) pico (c) nano (d) vi
158. Which is highly configurable text editor built to enable efficient text editing?
(a) ed (b) pico (c) nano (d) Vim
159. Which editor can be used from both a command line interface and as a standalone in a graphical user
interface?
(a) ed (b) pico (c) nano (d) Vim
160. To work with the Vim editor, we will have to.............It first.
(a) initiate (b) compile (c) interprete (d) none of them
161. On the which line is some text visible when a new file is opened in Vim?
(a) Last (b) First (c) Fifth (d) seventh
162. Which command is to be issued to insert the text in the file?
(a) Insert (i) (b) Append (a) (c) Open (o) (d) Any of these
163. Which command is to be issued to be in the insert mode of Vim editor?
(a) Insert (i) (b) Append (a) (c) Open (o) (d) Any of these
164. Which mode is the only way to select a block of text that needs to be modified?
(a) Visual mode (b) Insert (c) Last line (d) None of these
165. Which character switches to the visual mode allowing to manipulate characters?
(a) v (b) V (c) CTRL + v (d) d
166. Which character switches to the visual mode allowing to manipulate lines?
(a) v (b) V (c) CTRL + v (d) d
Std-11EM Lesson-7 Vim Editor And Basic www.verymicro.co 7
 167. Which command is used to insert text after the current cursor position?
(a) a (b) i (c) A (d) I
168. To go to last line mode we first need to be in which mode?
(a) command mode (b) Insert (c) Last line (d) None of these
169. Which method is used to create a file in Vim editor?
(a) Type vi followed by a file name and press Enter key
(b) Type vi at the prompt and press Enter key (c) cat filename (d) Both (A) and (B)
170. Which command displays a message on the screen?
(a) echo (b) ego (c) Disp (d) Display
171. Which command gives the name and some additional details of the user currently logged into the system?
(a) who am i (b) who (c) pwd (d) cal
172. Which command is used to set the desired privileges?
(a) chmod (b) changem (c) chmode (d) chprivilege
173. For a script to be executed it needs to have............permission.
(a) execute (b) read (c) write (d) all of these
174. Which command is called a filter command ?
(a) who (b) clear (c) echo (d) cut
175. To make sure that the contents within the double quotes after the echo command are not treated as
message we enclose them in ………….
(a) single quotes (b) double quotes (c) # (hash) (d) back quotes(` `)
176. The back quotes are printed on the key with..............sign on the keyboard.
(a) ~ (tilde) (b) single quotes (c) @ (at the rate) (d) %(percentage)
177. Who has almost all the capabilities of any higher level programming language in Linux?
(a) shell script (b) shell arithmatic (c) shell constants (d) functions
178. Which type of values can be assigned to a variable?
(a) strings (b) Numeric (c) shell script (d) Both (A) and (B)
179. What are the contents written after expr are assumed to be?
(a) operands of an expression (b) operators of an expression
(c) Boolean expression (d) Both (A) and (B)
180. which column of date command displays year?
(a) 3 (b) 4 (c) 5 (d) 6
181. Which command is used to display the year from date command?
(a) date | tr –s ‘ ‘ | cut –d “ “ –f 6 (b) date | tr –s ‘ ‘ | cut –d “ “ –f 4
(c) date | tr –s ‘ ‘ | cut –d “ “ –f 5 (d) date | tr –s ‘ ‘ | cut –d “ “ –f 3
182. Which command is used to assign value to variables defined in the shell script?
(a) read (b) echo (c) clear (d) None of these
183. In case we press Enter key without typing anything the script will assign..........Value to the variable.
(a) ELEVEN (b) ONE (c) ZERO (d) NULL
184. Which command is used to display the total number of lines in that file?
(a) Filename | wc -l (b) Filename | wc
(c) Filename | wc -w (d) Filename | wc -c
185. If the shell is unable to understand a word as a variable it will interpret it as a Linux ………….
(a) command (b) expression (c) environment variable (d) none of these
186. A variable when used in a shell script allows us to ……………..
(a) Assign a value to it (b) Accept its value from the user
(c) none of these (d) both (A) and (B)
187. If we reuse this variable again, the old value stored in it will be …………
(a) old value (b) zero (c) overwritten (d) null

Std-11EM Lesson-7 Vim Editor And Basic www.verymicro.co 8

 Standard : 11 Std.11 L-8 Advanced Scripting

1. In linux , all programs are executed as..........

(a) process (b)data (c) information (d) all of these
2. Each process when started has a unique number associated with it know as............
(a) memory id (b) process id (PID) (c)harddisk id (d) all of these
3. Which command is use to see the processes associated with the current shell without any parameters
(a) ps (b) Is (c) id (d) sp
4. Which command is used to view the process of all the user ?
(a) ps –ef (b) ps –If (c) ps – er (d) ps -er
5. Which column name shows name or number of the user who owns the process ?
(a) UID (b) PID (c) PPID (d) STIME
6. Which column name shows a unique numeric process assigned to each process ?
(a) UID (b) PID (c) PPID (d) STIME
7. Which column name show the start time for the current process ?
(a) UID (b) PID (c) PPID (d) STIME
8. Which column name identifies the parent id, the process that created the current process ?
(a) UID (b) PID (c) PPID (d) STIME
9. Which column name identifies the terminal that controls the current process ?
(a) TTY (b) TIME (c) CMD (d) STIME
10. Which column name identifies the amount of CPU time accumulated by the current process ?
(a) TTY (b) TIME (c) CMD (d) STIME
11. Which column name identifies command used to invoke the process ?
(a) TTY (b) TIME (c) CMD (d) STIME
12. Which command reads the data from the standard input device ?
(a) read (b) translate (c) convert (d) interpret
13. To remove the process from memory we use the..........command.
(a) kill (b) remove (c) delete (d)all of these
14. Which command is used to remove PID=101 ?
(a) kill -9 101 (b) kill 101 (c) kill -1 101 (d) none of these
15. Linux stores the value provided through command line in.......variable.
(a)* (b)$ (c)# (d)&
16. Which command assigns the string to be read from keyboard to variable ‘name’ ?
(a) read name (b) readkey name (c)assign name (d) none of these
17. $1 to $9 these arguments are known as.................
(a) command line command (b) command line variable
(c) command line parameter (d) command line arguments
18..........construct shell scripts allows to perform decision making.
(a) loop (b) if-then-fi (c) while (d) for
19. The if statement of linux is concerned with the.......of a expression.
(a) exit status (b) entry status (c) (a) and (b) (d) none of these
20. The exit status of command is..........if it has been executed successfully.
(a)1 (b) 0 (c) 3 (d) 4
21. The exit status of command is...........if it has been not executed successfully.
(a)1 (b) 0 (c) 3 (d) 4
22. In if statement.......bracket is use for opening and closing statement.
(a) * * (b) [ ] (c) ( ) (d) { }
23. There should be.........space after opening square bracket and one before closing bracket.
(a)1 (b) 0 (c) 3 (d) 4
24. If the condition is evaluated to true the statements typed inside......block will be executed otherwise not.
(a) if (b) while (c) for (d) then

Std 11 EM Lesson-8 Advanced Scripting www.verymicro.com 1

 25. The end of the if statements is indicated by.....statements.
(a) fii (b)fi (c)then (d)if
26. Then keyword should be typed.....if statements else we will get error.
(a) before (b) up (c)below (d)after
27. We can use the.........decision making instruction while creating a shell script in Linux.
(a)1 (b) 0 (c) 3 (d) 4
28. Which decision making instruction does Linux offers ?
(a) if-then-fi (b)if-then-else-fi
(c)if-then-elif-else-fi & case-esac (d) all of these
29. Which command will be used to compare two files passed to it as argument ?
(a) com (b) cmp (c) cam (d) comp
30. Linux provides.........command, which can be used in place of square brackets.
(a) if (b)test (c)then (d)else
31. The test command can carry out.....types of tests.
(a) numerical tests (b) string tests (c)file tests (d)all of these
32. Which tests are used when comparison between values of two numbers is to be done ?
(a) string tests (b) file tests (c) numerical tests (d) none of these
33. Which operator can be used for numerical test for greater than ?
(a) –gt (b)-lt (c)-ge (d)-le
34. Which operator can be used for numerical test ‘less than’ ?
(a) –le (b) –ne (c)-lt (d)-ges
35. Which operator can be used for numerical test ‘greater than or equal to’ ?
(a) –gt (b)-ge (c)-gq (d)-gi
36. Which operator can be used for numerical test ‘less than or equal to ‘ ?
(a) –la (b) –lq (c)-el (d)-le
37. Which operator can be used for numerical test ‘not equal to’ ?
(a)-n (b)-not (c)-ne (d)-no
38. Which operator can be used for numerical test ‘equal to’ ?
(a)-e (b)-eq (c)-ea (d)-et
39. How many relational operators are used to compare two numeric operands ?
(a) 4 (b) 6 (c)3 (d) 4
40. To combine conditions we make use of........operators.
(a) relational (b)file (c) logical (d) all of these
41. Shell allows usage of..........logical operators while testing a condition.
(a) two (b) three (c) four (d) five
42. Which logical operator allows in shell for testing a condition ?
(a)-a (AND) (b) –o (OR) (c) ! (NOT) (d) all of these
43. Logical operator AND is displayed with...........sign.
(a) –a (b)-e (c)-0 (d) !
44. Logical operator OR is displayed with...........sign.
(a) –a (b)-e (c)-o (d) !
45. Logical operator NOT is displayed with...........sign.
(a)-a (b) –c (c) –o (d) !
46. Which operator allows two or more conditions to be combined in a test ?
(a)-a (b)-0 (c)Both (a) & (b) (d)none of these
47. Which operator is used to converts true to false and vice versa ?
(a) AND (b) NOT (c) OR (d) None of these
48. Which operator is used to check the status of a file ?
(a) relational (b)file (c) logical (d) all of these
49. Which condition return True if a file with the specified name exists and has size greater than 0 ?
(a)-s name (b)-f name (c)-d name (d)-r name

Std 11 EM Lesson-8 Advanced Scripting www.verymicro.com 2

 50. Which condition return True if a file with the specified name exists and is not a directory ?
(a)-s name (b)-f name (c)-d name (d)-r name
51. Which condition return True if a directory with the specified name exists ?
(a)-s name (b)-f name (c)-d name (d)-r name
52. Which condition return True if a file with the specified name exists and the user has read permission
on it?
(a)-s name (b)-f name (c)-d name (d)-r name
53. Which condition return True if a file with the specified name exists and the user has write permission on it ?
(a) –w name (b) –x name (c) –d name (d) –r name
54. Which condition return True if a file with the specified name exists and the user has execute permission on it
?
(a) –w name (b) –x name (c) –d name (d) –r name
55. Which statements allows to test limited set of condition ?
(a) if-then-fi (b) if-then-else-fi (c) (a) and (b) (d) none of these
56. Which statements is used to perform more number of tests ?
(a) if-then-elif-then-else-fi (b) case (c) (a) and (b) (d) none of these
57. The alternate option for checking if-then-elif-then-else-fi conditions is to use a.......statements.
(a) for (b) case (c) (a) and (b) (d) none of these
58. All the statements written within that section are executed till.........are encountered.
(a) ? (b) ; ; (c) : : (d) <>
59. Once the semicolons are encountered the control is transferred to the line......the end of the case statement.
(a) after (b) before (c) top (d) bottom
60. The end of case statement is specified by.........keyword.
(a) esac (b)easc (c) case (d) none of these
61. The shell starts executing statements written..........the end of case statement.
(a) before (b) after (c) end (d) none of these
62. If user enter any value that does not match any of case value specified then the control is transferred to the
section that has......as its value.
(a) ? (b) & (c) * (d) $
63. The syntax of case statement is ………..
(a) case variablename in (b) case variablename in (c) case variablename in (d) case
Value1) Value1} Value1) Value1)
Command1 Command1 Command1 Command1
Command2 Command2 Command2 Command2
…………. …………. …………. ………….
;; ;; :: ;;
Value2) Value2} Value2) Value2)
Command1 Command1 Command1 Command1
Command2 Command2 Command2 Command2
………….. ………….. ………….. …………..
;; ;; :: ;;
*) *) *) *)
Command1 Command1 Command1 Command1
Command2 Command2 Command2 Command2
…………… …………… …………… ……………
;; :: ;;
esac

64. We can assign......value to the variable that accepts the choice

(a) numeric (b) character (c)string (d)all of these
65. In case we assign value then within the case it should be enclosed between........quotes.
(a) “ ” (b) { } (c) ‘ ’ (d) **

Std 11 EM Lesson-8 Advanced Scripting www.verymicro.com 3

 66. Cleaning of disk space is a normal operation that the........needs to perform.
(a) user (b) group (c)administrator (d) all of these
67. Linux shell facilitates the same command at given number of times is known as..........
(a) looking (b) rounding (c)looping (d)repeating
68. Linux shell facilitates.......types of loop statements.
(a) two (b) three (c) four (d) five
69. Which type of loop statements Linux shell provides ?
(a) for statements (b) while statements (c)until statements (d) all of these
70. Which loop allows us to specify a list of values in its statement ?
(a) for loop (b) while loop (c) until loop (d) do while loop
71. Which loop is executed for each value mentioned in the list ?
(a) while loop (b) do while loop (c) for loop (d) until loop
72. The syntax of for loop is …………
(a) for control-variable in (b) for control-variable in
value1,value2,value3 value1,value2,value3
do command1
command1 command2
command2 done
done

(c) for control-variable in (d)for in value1,value2,value3

value1,value2,value3 do
do command1
command1 command2
command2 done

73. Which another activity that administrator regularly performs is taking........of files.
(a) delete (b) remove (c) backup (d)all of these
74. Once all files are copied, the backup directory is compressed (packed) using........command.
(a) tar (b) zip (c) gz (d) all of these
75. Which command is used to backup directory in compressed (packed) ?
(a) tar-cfz (b) tar –czf (c) tar –vxf (d) tar -fvx
76. Which command is used to uncompress the tar file ?
(a) tar –xvf (b) tar –abc (c) tar –vxf (d) tar -fvx
77. Which loop repeats block of commands number of times ?
(a) for loop (b)while loop (c)until loop (d)do while loop
78. Which loop is used to repeats the set of command specified between keyword do and done statement as
long as the condition specified as an expression is true?
(a) for loop (b) while loop (c)until loop (d) do while loop

79. The syntax of while loop is ………….

(a) while [ test_condition ] (b) while { test_conditio } (c) while ( test_condition ) (d) while [ test_condition]

do do do done
command command command command
done done done do

Jagruti Classes, 120-122, First Floor Only, Chaturbhai Complex 2, Opp.: Batra Hospital,
StNd e1a1rEEMsLseassroPn-e8trAodlvPanucmedpS,cHripatrinngi-Wwawrswi.yvaerRyminicgroR.coomad,
 80. The.......loop is similar to the while loop.
(a) for (b)until (c) (a) and (b) (d) none of these
81 lop executes till the condition is false.
(a) for (b) until (c) while (d) none of these
82 loop executes till the condition is true.
(a) for (b) until (c) while (d) none of these
83 are small subscripts within a shell script.
(a) Statement (b) Loop (c) Function (d) None of these
84. Using the function we can improve the overall.....of the script.
(a) readability (b) writing (c) oral (d) none of these
85. The function used in shell script do not return a value, they return a...........
(a) binary (b) exit code (c) status code (d) all of these
86...........after a variable name indicate that it is function.
(a) { } (b) [ ] (c) ( ) (d) “ ”
87. Which of the following command is used to set the file permission as executable?
(a) grep (b) chmod (c)ls (d) x
88. Which of the following symbol is used to break the flow of control in the case statements.
(a)* * (b) ; ; (c) ++ (d) >>
89. Which of the following keyword specifies the end of the case statement ?
(a) end-case (b) end case (c)esac (d)stop case
90. Which loop iterates till the condition evaluates to true ?
(a) while (b) until (c) for (d) case
91. Which off the following allows us to specifi a list of values in its statement ?
(a) while (b) until (c) for (d) if
92. In case structure, which of the following character denote default case ?
(a) * (b) + (c) d (d) all of the above
93. Which of the following statement is true for testing whether the file is read only or not?
(a) test –read filename (b) check –read filename
(c)test –r filename (d) check –r filename
94. Which of the following indicate the end of if condition in shell script ?
(a) end-if (b) fi
(c) } (closing curly bracket) (d) It does not have any end statement
95. Which of the following operator is used for less than comparison in Linux ?
(a) < (b) less than (c) It (d) -It
96. Which of the following can be used in place of square brackets used in if condition ?
(a) Curly braces (b) test command (c) check command (d) All of the above

Std 11 EM Lesson-8 Advanced Scripting www.verymicro.com 5

 Lesson:09 Introduction to Database Management System
1. In current scenario with the advent and reach of digital technologies , almost all data is stored
and managed....................
A) electronically B) magnetically C)diagonally D) none of them
2. Day to day transactions in small and medium enterprises are recorded in systems termed as.................
A) information system B) manual system C) transaction system D) expert system
3.......................are examples of systems used by millions of users simultaneously.
A) Search engines B)Reservation systemsC) Online banking D) All of them
4. Information systems today has also become a strong helping hand in taking............
A) data B) information C) decisions D) (a) and (b)
5. To take best possible decision , everyone needs.................................
A)correct information B)precise information
C) relevant information on time D)all of them
6. Users expect.............in accessing data irrespective of the places they are at and irrespective of where the
data is stored.
A) touchability B)flexibility C) eligibility D) none of them
7. Perfect decision depends on the...............of information available.
A) imprecision B) accuracy C) inaccuracy D) appooximation
8....................is the output generated through processing of raw data.
A) Data B) Information C) (a) and (b) both D) None of them
9. All kinds of facts, figures and details related people places , things or an event is known as...............
(A) Data B) Information C) (a) and (b) both D) None of them
10. Data may be ..........
A) written B) oral
B) C) computerized or non computerized D) all of them
11. Which of the following must be processed in proper way to generate the useful and meaningful
information?
A) Data B) Information C) (a) and (b) both D) none of them
12 can be described as the required result obtained from processing of the data.
A) Data B) Information C) (a) and (b) both D) none of them
13 is nothing but “ The Processed Data”.
A) Data B) Information C) (a) and (b) both D) none of them
14 is important because it forms the foundation for Decision Making.
A) Data B) Information C) Flowchart D) assessment
15. Taking decision based on incomplete or incorrect information may badly affect the...........
A) business B) program C) flowchart D) none of them
16. School maintains details of all the..................enrolled in the school.
A) students B) customer C) passengers D)none of them
17. Under which project Indian Government is issuing unique identity numbers to each citizen?
A)Unique B)Exclusive C) Distinctive D) Adhar
18. Which office maintain details of the issued passports ?
A) Passport B)Visa C) Mastercard D)Maestro
19...................maintains medical history of each patient.
A) Inspector B)Doctor
C)Lawyer D)Medical Representative
20. Which department maintains details of passengers ?
A) Railway B)Medical Department C) Teacher D)None of them
21 is a collection of related data items stored in an organized manner.
A) Database B) Table C)Record D)Field

Std 11 EM L-09 Introduction to Database Management System www.verymicro.com 1

 22 arrangement of thing always makes searching easier as and when required.
A) Logical B) Attractive C)Data D) Informative
23. The underlying structure of database is known as...................
A) Data model B) Data arrangement
C)Data manipulation D)Encapsulation
24. Which of the following describes way of storing and retrieving the data ?
A) Data model B) Data arrangement
C)Data manipulation D)Encapsulation
25. Which of the following are data models ?
A) hierarchical data model B) network data model
C) relational data model D) all of them
26. To work with computerized database , one must first define and create a..............
A) table B) row C)column D) database
27. What basic tasks are expected to be performed regularly to keep the database ready with latest up-to-
date data ?
A) Adding data into the database as and when transaction takes place
B) Editing the content of the database with the corrections required as and when noticed
C) Removing unnecessary data from the database if any
D) All of them
28. All tasks related to database handling is known as......................
A) Database Management B) Database Manipulation
C) Database Organization D) Database Creation
29. Database Management System can perform-
A) Retrieval of data as per user requirement
B) Securing data and Maintaining backup of database
C) Allowing multiple users to access database simultaneously
D) All of them
30. Software required for Database Management is known as..................
A) Database Management Systems B) Database Management Integration
B) Database Manager D) Database Programming
31. DBMS can be defined as system designed for.
A) efficient of data B) maintenance of data
C) retrieval of data D) all of them
32. Which of the following are popular DBMS software available in the market ?
A) Oracle , Ingress B) SQL server, MYSQL
C) DB2 , MS Access , Base D) all of them
33. Which of the following is not DBMS software ?
A) DB2 B)Base C)Ingress D)Python
34. Base Database is a part of........................
A)Open Office Suits B) MS- Office C)SQL D) none of them
35. Base is based on a .........................
A)Relational data model B) Hierarchical data model
C) Network data model D) None of them
36.................is Relational Database Management System.
A) Base B) Writer C) Table D) Python
37. RDBMS stands for -
A) Relational Database Management System
B) Relative Database Management System
C) Relational Database Migration System
D) Relational Database Management Software

Std 11 EM L-09 Introduction to Database Management System www.verymicro.com 2

 38. The simplest but most versatile way to organize information is to store it in ................
A) file B) tables C) program D) none of them
39. The organization of data into collections of two dimensional tables called ...................
A) relations B) cross section C) array D) multiple array
40. Relational model is based on the theory of sets and relations of mathematic which is designed by
..................
A) E.F.Codd B) F.E. Codd C) E.E Codd D) F.F. Codd
41. A DBMS that is based on relational model is called as..................
A) ADBMS B) CDBMS C) RDBMS D)EDBMS
42. Base is a collection of related data objects known as........
A) Tables B) Queries
C) Report and Application Modules D) All of them
43. Being RDBMS,.............is the basic unit for storing data in database designed
A) Record B) Field C) Table D) none of these
44. Tables are organized in the form of .................
A) rows B) columns C) (a) and (b) D) none of them
45.................are real world objects about which information is to be stored in database.
A) Entities B) Objects C) Data D) Attributes
46. Each entity generally has collection of.................associated to it.
A) attributes B) database C) table D) none of them
47. Attributes of an entity are also termed as ..............
A) fields B) record C) table D) database
48.................is an object which allows entering the data in the table and editing or deleting existing data in
the table.
A) Query B) Form C) Report D) (a) and (b)
49. which of the following consists of format, style and widgets like radio button, list boxes that provides easy
and systematic way to populate table with data?
A) Table B) Query C) Form D) Report
50. A question asked within the database environment is known as ...............
A) Table B) Form C) Query D) Report
51. who displays subset of data contained in various tables of a database ?
A) Table B) Form C) Query D) Report
52. The output of.............in Base is displayed in the form of rows and columns.
A) Table B) Form C) Query D) Report
53. The presentation of information in an organized and readable format as per the user requirement is
known as .................
A) Query B) Table C) Report D)Data
54. Which of the following is the first step for creating a sample database for an application?
A)about whom data is to be stored
B)what attributes of each entity is to be stored
C) what kind of data we want to enter into each attribute
D)a key field of the table designed
55. Which of the following is the second step for creating a sample database for an application?
A)about whom data is to be stored
B) what attributes of each entity is to be stored
C) what kind of data we want to enter into each attribute
D) a key field of the table designed
56. Attributes (fields ) can be defined as characteristics of an .
A) entity B)table C)database D)DBMS

Std 11 EM L-09 Introduction to Database Management System www.verymicro.com 3

 57. names are used at the time of designing the data model.
A) Physical B) Logical C) both (a) and (b) D) none of them
58. Base allows naming a field as
A) First Name B) First_Name C) F_Name D) All of them
59. What conventions to name the attributes will facilitate porting of database (Base database) design to
other database software ?
A) start of all attribute names with a letter and for subsequent characters use either letters ,numbers or
the underscore character
B) Do not use special characters and a space between words instead separate them with the underscore.
C) Use abbreviations if needed to keep the length of attribute names short
D) all of them
60. What do you mean by camel back notation ?
A) each word in field name starts with capital letter
B) each word in field name ends with capital letter
C) each word in field name starts with small letter
D) each word in field name ends with small letter
61. Which of the following is the third step for creating a sample database for an application?
A) about whom data is to be stored
B) what attributes of each entity is to be stored
C) what kind of data we want to enter into each attribute
D) a key field of the table designed
62. It is compulsory to define the.........of each field.
A) field B) data type C)record D) Database
63..................is a way to define storage structure of the field.
A) Field B) Data Type C) Record D) Database
64. Computation that require more accuracy tend to be..............and use more memory.
A) slower B) faster C) very slow D) stop
65. When building tables with Base, a of options will be presented asking to choose the kind
of attributes to store.
A) drop-down menu B) check box C) combo box D) radio button
66. Into how many categories the datatypes in Base divided
A) one B) two C)three D) four
67. Which of the following is the part of data type category in Base?
A) Alphanumeric type B) Calendar type C) Binary type D) All of them
68. To enter a data that consists of letter, number as well as special character then we can select one of the
data types .
A) Long Var Char B) Char C) Var Char Ignore Case D) All of them
69. The Number of byes to be allocated to data type depends on the number of characters
entered by the user.
A) Var Char B) Boolean C) Text D) All of them
70. For which data type maximum length is 2 GB ?
A) Var Char Ignore Case B) Var Char C) Char D) All of them
71. Which data type stores up to the maximum legth or number indicated by user and accept any UTF
8 character?
A) Long Var Char B) Var Char C) Var Char Ignore case D) None of them
72. Which data type stores exactly the length specified by user and pads with trailing spaces for shorter
strings?
A) Long Var Char B) Char C) Var Char Ignore case D) None of them
73. Which data type stores up to the specified length and no padding is done?
A) Var Char B) Char C) Var Char Ignore case D) None of them

Std 11 EM L-09 Introduction to Database Management System www.verymicro.com 4

 74. In which data type,data is stores as typed by the user?
A) Var Char B) Char C) Var Char Ignore case D) None of them
75. data type is used when we are aware of exact number of character to be entered in the field.
A) Character B) Numeric C) Calendar Type D) None of them
76. Which data type can be used for license number, passport number as they have fixed number
of characters?
A) Character B) Numeric C) Calendar Type D) None of them
77. The character data type has on number of character that can be used.
A) limitation B) allowance C) permit D) authorize
78. To store some descriptive data which may have more than 255 characters, the data type up to
64000 characters?
A) Character B) Memo C) Desc D) Long Character
79. Which data type allows us to store any text data up to 64000 characters?
A) Character B) Memo C) Desc D) Long Character
80. is efficient when the fields are used for searching and it is unsure that whether user will enter
searching text in lower case or upper case.
A) Text (Var Char) Ignore case B) Text (Var Char)
C) Text (Long Var Char) D) None of them
81. code that needs only one byte to store a character.
A) ASCII B) ANSI C) DBMS D) RDBMS
82. Standard that allow for larger numbers of characters have been developed, like that use more
bytes per character.
A) Unicode B) Barcode C) Unique code D) Standard Code
83. Base will store alphanumeric characters using , which is a code that is compatible with both
ASCII and Unicode.
A) UTF-5 B) UTF-8 C) UTF-1 D) UTF-2
84. Base will use bytes for each character according to internal calculations.
A) one or more B) two only C) eight only D) four only
85. Which data type is used to store numerical information like marks of a student, salary of an
employee, quantity on hand or balance in the bank account of a person?
A) Character B) Numeric C) Memo D) Data/Time
86. data type attributes are described by the number of bytes they use and whether they are signed
or unsigned.
A) Character B) Numeric C) Memo D) Date/Time
87. Which two factore determine the range of possible values they can hold ?
A) number of bytes they use B) whether they are signed or unsigned
C) (a) and (b) D) none of them
88. use the least memory consuming side of number storage.
A) Boolean numbers B) Character C) Data/Time D) Memo
89. A Boolean number or YES/NO data type is in fact uses just bit.
A) one B) two C) four D) eight
90. Which data type is useful to store answer to the question whether the mobile is Wi-Fi enabled or not?
A) Yes/No B) Integer C) Memo D) Var Char
91. The attributes called that allow us to store numbers that have decimal places like 1.715249.
A) Floating point numbers B) Character C) memo D) boolean
92. Byte(s) occupied by Tiny Integer is .
A) 16 B) 8 C) 4 D) 1
93. How much bytes are occupied by Tiny Integer is .
A) 1 B) 2 C) 4 D) 8
94. bytes are occupied by Integer.
A) 1 B) 2 C) 4 D) 8

Std 11 EM L-09 Introduction to Database Management System www.verymicro.com 5

 95. How much bytes are occupied by Bit Integer?
A) 1 B) 2 C) 4 D) 8
96. How much bytes are occupied by Number or Decimal?
A) 1 B) 2 C) 4 D) No limit
97. How much bytes are occupied by Real ?
A) 1 B) 2 C) 4 D) No limit
98. What is range of Tiny Integer ?
A) 0-255 B) -32768 to 32768 C) 0-1 D) none of them
99. What is range of Small Integer ?
A) 0-255 B) -32768 to 32768 C) 0-1 D) none of them
100. What is range of Integer data type?
A) 0-255 B) -32768 to 32768
C) 0-1 D) -2.14x109 to 2.14x109
101. What is range of Big Integer data type ?
A) 0-255 B) -32768 to 32768
18 18
C) -2.3x10 to 2.3x10 D) -2.14x109 to 2.14x109
102. What is range of Real data type ?
A) 0-255 B) -32768 to 32768
18 18
C) -2.3x10 to 2.3x10 D) 5x10(-324) to 1.79x10(308)
103. Range of Decimal and Number data type is .
A)0.255 B) -32768 to 32768 C) Unlimited D) 0-1
104. data type is used to store calendar information like year, month, day, hour, minute, second and
fraction of a second.
A) Integer B) Calendar C) Real D) Yes/No
105. data type allows storing year,month and days as it is stored in the system through which data is
entered.
A) Date B) Time C) Timestamp D) Integer
106. type attributes stores the time of the day: hour, minute and second.
A) Date B) Time C) Timestamp D) Integer
107. has been designed for recording of both the time and day of an event at once.
A) Date B) Time C) Timestamp D) Integer
108. The type attributes allow us to store any information that comes as a long string of zeros and
ones.
A) Binary B) Character C) Number D) Memo
109. Digitized images and sounds use format.
A) Binary B) Character C) Number D) Memo
110. Base will make no attempt to identify the kind of you have stored.
A) Folder B) File C) Paint D) Program
111. Which data type stores any array of bytes for images, sounds, etc?
A) Long var Binary B) Var Binary C) Binary D) None of them
112. Base sorts numbers in a Text field from
A) left to right B) right to left C) top to bottom D) bottom to top
th
113. What is the 4 step while designing database?
A) about whom data is, to be stored? B) what attributes of each entity is to be stored
C) what kind of data we want to enter into each attribute D) a key field of the table designed
114. The terms of database, a field or combination of field capable of identifying each record uniquely is
known as
A) primary B) secondary C) Tertiary D) Main
115. The field that has unique importance in the table is known as
A) key Field B) key Row C) key Table D) Key Database

Std 11 EM L-09 Introduction to Database Management System www.verymicro.com 6

 116. In RTO Office, driving license number can serve as key
A) primary B) secondary C) Tertiary D) Main
117. A value means unknown or missing value.
A) junk B) null C) litter D) refuse
118. Primary key values cannot contain
A) Duplicate values B) Null values C) (a) or (b) D) None of them
119. In a table, combination of more than one field can serve as key.
A) primary B) secondary C) Tertiary D) Main
120. A primary key designed by combining more than one field is known as primary key.
A) Composite B) Secondary C) Tertiary D) Main
121. Start Base by selecting-
A) select Applications -> Office -> OpenOffice.org 3.2 Base
B) select Applications -> OpenOffice.org 3.2 Base
C) select Applications -> OpenOffice.org 3.2 Base -> Base D)none of them
122. To work with any of the database created earlier can be open by choosing an option.........
A) Open an existing database file B) Open database
C) Open existing file D) Open database file
123. Which option is selected to create new database ?
A) Create a new database B) Create new
C) Create database D) Create database table
124. An option to register our database in OpenOffice.org web site to make the database.......
A) private B) public C) both (a) and (b) D) none of them
125. In Database wizard,............don’t make database public.
A) No , do not register the database B) Yes , register the database for me
C) No, make it private D) none of them
126. Which two option are provided by Base to create tables ?
A) Design View and Wizard B) Wizard view and Manual view
C) Wizard view and Automatic view D) None of them
127. In Database Wizard dialog box , by default...........option would be checked.
A) Open the database for editing B) Create tables using the table wizard
C) (a) and (b) D) none of them
128. In Database Wizard dialog box, which option should be selected to created tables using wizard ?
A) Open the database for editing B) Create tables using the table wizard
C) (a) and (b) D) none of them
129. Base will automatically assign..............extension to the database file .
A) .obd B) .odb C) .bas D) .bdo
130. Which button should be clicked to select all the fields that are visible under Available fields list ?
A)>> B) > C) << D) <
131. Which key should be hold to select the desired fields one by one ?
A) Alt B) Ctrl C) Shift D)Caps
132. In the............pane, you can see Database Objects, viz., Tables, Queries, Form and Reports.
A) Top B)Bottom C)Left D)Right
133. Which Database Objects would be the default selection ?
A) Tables B) Queries C) Forms D) Reports
134. Each field is associated with.............terms .
A) one B) two C) three D) four
135. In Table design view , which of the following allows to assign a data type to each field ?
A) Field Name B) Field Type C) Description D) Field Properties

Std 11 EM L-09 Introduction to Database Management System www.verymicro.com 7

 136. It is good practice to enter.............for each of the field , through it is not compulsory to write for each
field of the table .
A) Field Name B) Field Type C) Description D) Field Properties
137. The..............helps the user to understand what the purpose of each field is.
A) Field Name B) Field Type C) Description D) Field Properties
138. In Table design view , which of the following used to control and validate the data that is to be entered ?
A) Field Name B) Field Type C) Description D)Field Properties
139. To delete any object created in Base,.............the object icon and click on Delete option.
A) left click B) right click C) double click D) triple click
140. Table Design View is grid structure with.............columns.
A) one B) two C)three D) four
141. which three columns are displayed in Table Design View?
A) field Name, field Type and Description
B) field Name, field Type and Properties C) field Name, field Properties and Description
D) field properties, field Type and Description
142. In Table Design View ,Field Properties pane displayed at the.........half of the window.
A) top B)bottom C) left D) right
143. To designate a field as primary key,................click on the required field and select primary key option.
A) left click B) right click C) a or b D) none of them
144. Who is not much useful in its original form?
A) Data B) Information C) Both (A) and (B) D) None of these
145. Data base are designed according to whom?
A) Data B)user C)Rules D) place
146. Who is storing and retrieving data?
A) Data B) Datamodel C) Information D) none of these
147. What is the full form of DBMS?
A) Data Base Management System B) Data Base Management Solution
C) Data Base Management Section D) Data Base Management Source
148. Who make database practical and more usable?
A)Datamodel B) DBMS
C) Data Base Management model D) Data Base Management Source
149. Which type of data base ‘base’ is?
A) open source B) Proprietary C) Both (A) and (B) D) none of these
150. Which type of system ‘base’ is?
A) Spread sheet B) Presentation C) RDBMS D)word processor
151. Base has a versatile way to organize information and store it in …………….
A) table B) form C) report D) query
152. Relational model designed by E.F. Codd is based on the theory of …………..
A) sets and relations of science B) sets and relations of mathematics
C)sets and relations of binary D) sets and relations of data base
153. Which is the most successful data model?
A) Hierarchical B) Relational C) Network D) Product
154. Relational model is successful because of its …………..
A) simplicity B) versatility C) design D) decision power
155. Base is a collection of …………
A) related data objects B) related data application
C)related field objects D) related entity objects

Std 11 EM L-09 Introduction to Database Management System www.verymicro.com 8

 156. What is the important factor to store data in base data base?
A) table B) form C) report D) query
157. Tables are organized in the form of ………….
A) column and field B) column and row C) row and attribute D) row and entity
158. Attributes of an entity are represented in the form of …………..
A) row B) column C) cell D) any one
159. Collection of all fields forms a ………….
A) column B) record C) entity D) attribute
160...............help in providing easy and systematic way to populate table with data.
A) Table B) widgets C) Data base D) Query
161. Which facility is given in Base for attractive output?
A) table B) form C) report D) query
162..............can help in taking decisions by management in organizations.
A) table B) form C) report D) query
163. How many steps are available for creating data base?
A)2 B) 3 C)4 D) 5
164. Product , suppliers, Employees and customers are known as............in data base.
A) entity B) form C) field D) key-field

165. In which step you are decided to design entity and table in database?
A)1 B) 2 C)3 D)4
166. In which step of data base the attribute for entity is decided?
A)1 B) 2 C) 3 D) 4
167. Which option is used for name in data base?
A) Logical name B) physical name C) Both (A) and (B) D) None of these
168. Start all attributes name with.............In data base.
A) letter B) number C) underscore D) all of these
169. In database, do not use...............between word of attributes.
A) space B) underscore C) both (A) and (B) D) none of these
170. The choice of data type will affect the performance of the …………..
A) object B) data base C) entity D) attribute
171. Maximum storage capacity of Text (fix) [CHAR] data type is …………..
A) 1 GB B) 2 GB C) 3 GB D) 4 GB

Std 11 EM L-09 Introduction to Database Management System www.verymicro.com 9

 Lesson:10 Working with Tables

1. To get the correct information at right time; database have to prepare and perform various
operations like-
A) inserting data
B) editing the previously and wrong data
C) delete unnecessary and wrong data
D) all of them
2. To insert records into the tables, open the..........first.
A) table B) report C) label D) data type
3. To open the table name in tables,on the icon that has the required table name in Tables
Pane of Database Window.
A) double click B) right click C) triple click D) dragging
4. To open the table, right click on the desired table and select the.........option from the sub
menu visible.
A) New B) Open C)Existing database D) Create
5. In Base, the line consisting of field names is known as..................
A) Heading line B)Title line C) Main line D) Description line
6. In Database view limited fields are seen and to see the remaining fields,.........is used given
at the bottom of the screen.
A) Title bar B) Menu bar C)Scroll bar D)Tool bar
7. In Base, below the Title Line, there is a row consisting of empty boxes which should be
filled with appropriate data is known as ..................
A) Data Entry B) Title Entry C)Information Entry D)Fill ups
8. In front of the first field there is a small box that contain a pointing arrow sign . This box is
known as.........................
A) Record Selector Box B) Record Deletion Box
C) Record Icon D) Record Filling Box
9. The sign in ‘ Record Selector Box’ is referred as...................
A) Record Selector Bar B) Record Selector Menu
C) Record Selector Icon D) Record Selector Box
10. The black pointing arrow icon is known as the.............that indicate current record of the
table at any given moment of time.
A) record pointer B) record mover C) record selector D) record hider
11.The..........icon with flash is the end of the table mark.
A) Black B)Green C) Red D) Yellow
12.What is the total number of record in the table if 4 of 54 is written in navigation bar?
A) 54 B) 4 C) 58 D) none of them
13.ESC stands for.
A)Escape key B) Enter key C) Shift key D) none of them
14.The pencil icon is an...........Icon.
A)Edit B) Add C) Insert D) Delete

Std 11 EM Lesson:10 Working with Tables www.verymicro.co 1

 15. Clicking on any of the field to edit the data, the black pointing arrow icon will be replaced
with this...............like icon.
A) Pen B)Pencil C) Eraser D) Arrow
16. In Base, if we move the cursor to another record, then correction will be saved, and if we
press.........key then the correction will be cancelled and the original contents will be
restored.
A) Alt B) Ctrl C) Esc D) Shift
17.Which bar helps to
A)Navigation Bar B) Menu bar C) Title bar D)Tool bar
18.Navigation bar helps to
A) know the current position of the record pointer
B) insert new record
C) move to first or last record
D) all of them
19. In case of the Boolean type field a square box will be shown in the field and if box is
marked with tick mark sign it means that the value of the field is..........otherwise...........
A) false , true B) true , false C)false , false D) true , true
20.Why there is a requirement to edit entered data?
A) Data entered during data entry is incorrect.
B) After correct data entry, there is a change in the value of the data
C) (a) and (b)
D) none of them
21. The process of correcting the data entered previously is known as............
A) Editing B) Inserting C) Deleting D) None of them
22.To keep our database precise and meaningful , it is very much necessary to......unnecessary
or incorrect record from the table.
A)delete B) edit C) insert D) none of them
23.To delete a record press.............key after selecting the record.
A) Del B)Esc C)Ctrl D) Alt
24.To delete a record, select Delete option from..........menu.
A) File B) Edit C) Update D)Format
25.By right clicking the selected record and choosing..........Option from the sub menu.
A)Delete Record B)Update Record C)Insert Record D)Add Record
26. While deleting the record, Base will display a dialog box with a...........message.
A) warning B)update C) upload D)save
27.In warning message , clicking on which button will delete the selected record
permanently?
A)Yes B) No C) Ok D)Cancel
28.To short the field , select the required field and then click on...........button.
A) Sort Ascending B) Sort Descending C)(a) or (b) D) none of them
29.What is the name of (pg 211) button?
A) Sort Button B) Sort Ascending C) Sort Descending D) None of them

Std 11 EM Lesson:10 Working with Tables www.verymicro.co 2

 30..............is a term used for unnecessary duplication or repetition of data.
A) Data Redundancy B) Data Encapsulation C) Data Abstraction D) Polymorphism
31.Database designers attempt to criminate redundant data as far as possible by using a
technique
A)Data Normalization B) Data Abstraction C) Polymorphism D)None of them
32..............is a process that suggestes decomposition of single table into multiple tables, thus
creating a parent-child relationship.
A) Normalization B) Abstraction C) polymorphism D) None of them
33. The table which contains primary key is known as................table.
A) Master B) Transaction C) Multiple D) Main
34 key can be defined as field or combination of fields whose values are borrowed
from another table.
A)Primary B) Foreign C)Composite D) Master
35................key can be defined as combination of fields whose values are borrowed from
another table.
A)Primary B) Foreign C)Composite foreign D) Master
36.When a Master table has composite primary key , tables related with it will holld..............
A) primary B) Foreign C)Composite foreign D) Master
37.Establishing............between table will restrict the user from entering garbage data in
the
referenced fields.
A)relationship B)primary key
C)composite primary key D) data redundancy
38.Under which menu Relationship option is available ?
A)File B) Relation C) Create D) Tools
39. Select........to open Add Tables dialog box in relationship window.
A) Insert -> Add Tables B) Add-> Tables C) Add Tables -> Insert D) Edit-> Add Tables
40.What operation should be carried out to create relationship ?
A)drag and drop B) right click C)double click D) none of them
41.In relationship window , what text table is displayed on the primary key side ?
A) 1 B) m C) n D) p
42.In relationship window , what text label is displayed on the foreign key side ?
A) 1 B) m C) n D) p
43. Each unique value stored in primary key field may be repeated a number of times in.....key.
A) composite primary B) foreign C) master D) primary
44. In what type of relationship , one value of referred table is associated with multiple values
in referencing table ?
A) One to many B) One to One C) Many to Many D) Many to One
45. Once the relationship between two tables, the........of referencing field and referenced
field must be same.
A) data type B) description C) (a) and (b) D)none of them

Std 11 EM Lesson:10 Working with Tables www.verymicro.co 3

 46. Once the relationship between two tables is created,.......the line depicting relationship to
open relations dialog box.
A) Single click B) double click C) right click D) drag and drop
47 principle can be stated as, “No unmatched foreign key values should exist in the
database.”
A) Referential Integrity B)Relationship
C) Database Integrity D) None of hem
48.Which option states that a user should not be allowed to delete or update any record
exists in some other table ?
A) No action B) Update cascade C) Set null D) set default
49.Which option states that if user is allowed to delete or update referenced values , all the
related records should be automatically deleted or updated ?
A) No action B) Update cascade or Delete cascade
C) Set null D) set default
50. Which option states if user deletes or updates the referenced field , all the related records
will hold null value in the related field ?
A) No action B) Update cascade C) Set null D) set default
51.Relationship established between any two tables can be-
A) edited B) deleted C) (a) and (b) D) none of them
52.How many types of relationship can be created between tables of the database ?
A) one B) two C) three D) four
53. Which of the following is not a part of relationship ?
A) One to One B) One to Many C) Many to one D) Many to Many
54 relationship indicates that one specific record of a particular table has one and
only one corresponding record in the other table of the database.
A) One to One B) One to Many C) Many to one D) Many to Many
55.Which type of relationship is created between Chair and Person ?
A) One to One B) One to Many C) Many to one D) Many to Many
56.Which type of relationship is created between class and class teacher or library card issued
to a student ?
A) One to One B) One to Many C) Many to one D) Many to Many
57.In which type of relationship one specific record of a particular table may have many
corresponding records in the other related table of the database ?
A) One to One B) One to Many C) Many to one D) Many to Many
58.Which type of relationship is created between class teacher and student ?
A) One to One B) One to Many C) Many to one D) Many to Many
59.Which type of relationship is created between state and city ?
A) One to One B) One to Many C) Many to one D) Many to Many
60.In...........relationship occurs in the case or some specific record , which has to be stored
more than once in both the tables.
A) One to One B) One to Many C) Many to one D) Many to Many

Std 11 EM Lesson:10 Working with Tables www.verymicro.co 4

 61. Which of the following is not an example of One to One relationship ?
A) Class and Class Teacher B) Chair and Person
C) Library cad issued to a student D)Class Teacher and Student
62. In the field of information technology , the data in the raw material used to produce
finished goods known as..............
A) Data B) Information C) Table D) Row
63.To prevent mistakes , base provides a special facility called.................
A)Row Level Validation B) Field Level Validation
C) Table Level Validation D) Database Level Validation
64...................is the important aspect of the processing.
A)Data validation B) Data Addition C) Data Deletion D)Data Insertion
65...............determines how the values is the field are stored and displayed.
A)Field Properties B) Field Validation C) Field Name D) Field Description
66.Field Properties can be decided at the time of...........the structure of the table.
A)data entry B) designing C) deleting D)updating
67.Which field properties set to Yes so that Base automatically increment the value for each
new record?
A)Auto Value B) Entry Required C) Auto Increment D)Default Value
68.Which field properties set to ‘Yet’ so that user cannot left that field empty?
A)Auto Value B) Entry Required C) Auto Increment D)Default Value
69.Which property determines whether the user must enter a value for a particular field to
complete a record entry ?
A)Auto Value B) Entry Required C) Auto Increment D)Default Value
70.What is the default length for Text data type ?
A) 8 B) 16 C) 32 D) 50
71. Which field properly allow to specify field size as per requirement?
A) Auto Value B) Size C) Length D) Default Value
72.Which field property store some predefined default value automatically in a particular field
at the time of entering a new record in the table?
A)Auto Value B) Size C) Length D) Default Value
73. Which field properly specifies the format for displaying and printing the data entered in
the field ?
A) Format B)Display C) Show D) None of them
74.What is the format code for displaying date in the format ‘ Dec 31 , 99 ‘ ?
A) MMM D , YY B)MMM DD , YY C) MM DD , YY D) Mmm DD , YYYY

Std 11 EM Lesson:10 Working with Tables www.verymicro.co 5

 Lesson:11 Retrieving Data Usnig Queries
1 is a huge collection of data.
A) Database B) Data File C) Data Model D) None of them
2 is the feature of Base , which can be used to retrieve specific set of information
from database.
A) Table B) Query C) Form D) Report
3. The user can retrieve data according to his..........irrespective of how it is stored in the
database.
A) choice B) criteria C) format D) all of them
4. What is the reason behind using Database Management System ?
A) ability to design query B) storage purpose
C) use the queries as and when required D) all of them
5.................basically means asking question , doing inquiry or performing analysis.
A) Table B) Form C) Query D) Report
6. In Base, to.........is to ask a question about the information in the database .
A) Table B) Form C) Query D) Report
7. What do you mean by Query ?
A) asking question B)doing inquiry C) performing analysis D)all of them
8. Through a..............one can tell Base to display exactly which fields and records a person
would like to view from the database.
A) Table B) Form C) Query D) Report
9. Query is a set of.............for fetching information from a table , or from several tables at
once.
A) tables B) form C) rules D) reports
10.The result of a query is itself in the form of a .................
A) table B) query C) label D) report
11.The result of query is in form of table which consists of a set of ..............
A) row B) column C) report D)(a) and (b) both
12. If some queries already created then it will be listed under the pane titled .........
A) Tables B)Queries C) Form D) Report
13.Different ways to create a query will be shown in the ............
A)Task bar B) Task Pane C) Status bar D) Navigation bar
14.How many ways are there to create a query in Base ?
A)one B) two C) three D) four
15.In base, which of the following option are available in task pane to create query ?
A) Create Query in Design View B) Use Wizard to Create Query
C) Create Query in SQL View D) All of them
16. In Base, which view provides a minimal amount of guidance to create a query ?
A) Create Query in Design View B) Use Wizard in Create Query
(C)Create Query in SQL View D) None of them
17. Which view guides through the process of query creation ?
A) Create Query in Design View B) Use Wizard in Create Query
C) Create Query in SQL View D) None of them

Std 11 EM Lesson:11 Retrieving Data Usnig Queries www.verymicro.co 1

 18. Which of the following provides no guidance at all while creating Query ?
A) Create Query in Design View B) Use Wizard in Create Query
C) Create Query in SQL View D) None of them
19. Users need to have knowledge about fourth generation computer language called.........
A) Structure Query Language B) Structure Query Like
C) Standard Query Language D) Standard Query Language
20. Base’s...........has the advantage of helping us to organize our through while requiring no
previous knowledge .
A) Design View B) Query Wizard C) SQL View D)Table View
21.How many steps are there to create a query using wizard ?
A) four B) eight C) ten D) eleven
22. What is the first step of query wizard ?
A) Field Selection B)Sorting order C) Grouping D)Aliases
23.In Query wizard, which steps field is selected ?
A) first B) second C) third D) fourth
24. In Query wizard. which button is used to move the field from ‘ Available fields’ list box to
‘Fields in the Query’ List box ?
A) left and right arrow B) up and down
C) in and out D) none of them
25. Fields in ‘Fields in the Query ‘ list box can be arranged in the required order by using
the...........buttons.
A) left and right arrow B) up and down
C) in and out D) none of them
26. Which of the following helps in identifying the fields that is to be displayed in output ?
A) Field Selection B) Sorting order C) Grouping D) Aliases
27.What is the second step of query wizard ?
A) Field Selection B) Sorting order C) Grouping D) Aliases
28. Base allows to select up to............fields for deciding the sorting order of the output.
A) one B) two C) three D) four
29. What is the third step of query wizard ?
A) Field Selection B) Search condition C) Grouping D) Aliases
30. How many search conditions can be defined in one query while creating Query using Query
Wizard ?
A) one B) two C) three D) four
31. In which step we have to select appropriate values of Fields, the Conditions and Value
parameters ?
A) first B) second C) third D) fourth
32. If multiple search condition are to be set like last name may be ‘Shah’ or ‘Patel’ then
choose ..................
A) Match all of the following B) Match any of the following
C) Match any one D) No Match
33. What is the seventh step in query wizard ?
A) Field Selection B) Search condition C) Grouping D) Aliases

Std 11 EM Lesson:11 Retrieving Data Usnig Queries www.verymicro.co 2

 Jagruti Classes, 120-122, First Floor Only, Chaturbhai Complex 2, Opp.: Batra Hospital,
Near Essar Petrol Pump, Harni-Warsiya Ring Road, Vadodara. Mohinder Sir : +91 97146 30799

34. What is the purpose of the seventh step ?

A) display the field in human readable form
B) store the field names in machine language
C) display the field names as in table
D) none of them
35. In the.............step, Base expects aliases for selected field names .
A) Fifth B) Sixth C) Seventh D) Eighth
36. In Query wizard,...........allows space between words and writing full forms of short field
names .
A) Alias B) Full form C) Similar D) None of them
37.In Query wizard , the step of Aliases is ...........
A) optional B) compulsory C) both (a) and (b) D) none of them
38.Which step is compulsory in query wizard ?
A) Field Selection B) Grouping C) Detail or summary D) Alias
39.In which step desired name can be assigned to query ?
A) Fifth B) Sixth C) Seventh D) Eighth
40. Once the query is created , the only way to make changes is through the .......
A) SQL B) Wizard C) Show Query D) Design View
41. What is the eighth step of query wizard ?
A) Field Selection B) Search condition C) Grouping D) Overview
42. Which option is selected in eighth step of query wizard to view the query result
immediately ?
A) Display Query B) Modify Query C) Show Query D) Design View
43.Which option is selected in eighth step of query wizard to open the Design view ?
A) Display Query B) Modify Query C) Show Query D) Design View
44.What will be shown is ‘Display Query’ is selected in eighth step of Query Wizard ?
A) Result of query B) Design View C) Report D) None of them
45.The limitation of Query Wizard is allowing........table to be selected.
A) Only one B) two C) three D)multiple
46.Which Aggregate function allows to do sum of the required field ?
A) sum to get B) get the sum of C) sum of D) add of sum
47.Which step allows doing Grouping of required field ?
A) third B) fourth C) fifth D) sixth
48.There is no limitation of including multiple...........in Query Design View.
A)Tables B) Form C) Report D) None of them
49.In ‘ Add Table or Query ‘ dialog box , which button is clicked to add table in Query Design
View ?
A) + B) Add C) Add All D) Include
50.The ‘Add Table or Query ‘ button available in.........toolbar.
A) Query Design B) Standard C) Formatting D) None of them
51.In Query Design View, what is the default value for visible option for each field ?

Std 11 EM Lesson:11 Retrieving Data Usnig Queries www.verymicro.co 3

 A) True B) False C) True or false D) None of them
52.In query design view, there are rows with heading ............
A) Alias , Criterion B) Sort, or C)Function, Visible D) All of them
53. What is the limitation of creating a query using wizard ?
A) allows single table to create query
B) not allowing to specify condition
C) not able to perform sorting
D) none of them
54.Which dialog box will appear after clicking on ‘ Create Query in Design View. ’ ?
A) Add Table dialog box B) Add Query dialog box
C) Add Table or Query dialog box D) Add Report
55.Select Ascending/Descending from drop down box visible after the row heading........under
the required column .
A) Arrange B) Sort C) Order D) (a) and (b)
56.Which option is selected to save a query ?
A) File-> Save B) File -> Store C) File -> Save Query D) File -> Query
57.Run Query button is present on..........toolbar.
A) Query Design B) Table Design C) Wizard D) None of them
58. To make changes in Query ,select..........options from the popup menu by right clicking on
the query.
A) Add B) Edit C) Design D) Alias
59.Specifying a.............will limit the records.
A) field B) criterion C) sort D) table
60.Applying criteria means to display a subset of ............
A) selected records B) single records C) any random records D) none of them
61.Which of the following delimiter is used in criterion cell if there is a Text?
A) ‘ ’ B) # C) $ D) “ “
62. Which of the following delimiter is used in criterion cell if there is a date ?
A) asterisk B) hash C) double quotes D) cofon
63.Which of the following is hash Symbol ?
A) % B) # C) @ D) $
64. Which of the following delimiter is used in criterion cell if there is a Number
A) quotes B) delimiter not required C)double quotes D) asterisk
65.What Base will do if delimiter is not used ?
A) report error B) apply delimiters automatically
C) exit from base D) none of them
66.what should be done to get desired result of query ?
A) Run query B) Show query C) Display query D) Delete query
67.How many logical operators are available in Base?
A) one B) two C) three D) four
68.Which of the following symbols are special operator ?
A) And B) Or C) Is D) Not
69.Which of the following symbols are special operator ?

Std 11 EM Lesson:11 Retrieving Data Usnig Queries www.verymicro.co 4

 A) Like B) Is C) Between D) all of them
70. Which of the following is comparison operator ?
A) < , > B) <=, >= C) <> , = D) all of them

71. Base allows design .......... for defining criteria using different types of operators .
A) report B) form C) expression D) query
72.What is the expression to display the list of employees who joined after 1 st June 2011 ?
A) >01/06/2011 B)> =#01/06/2011#
C) >#01/06/2011# D)<01/06/2011
73. To hide any field used in the query output ,clear the check mark shown in the
..........property of that field.
A) Visible B) show C) Display D) Hide
74. Base offers.............operator to specify the criteria like>=#1/6/2009# and <= #11/1/2006#
A) Like B) In C) Between D) Is
75. What should be written in criteria to display the employees list that joined between 1 st
June 2005 and 1st Nov 2012 ?
A) >=1/6/2005 and <1/11/2012 B) ># 1/6/2005# and < #1/11/2012#
C) >=#1/6/2005# and <=#1/11/2012# D) <=1/6/2005 and >= 1/11/2012
76. What should be written in criteria to display the employees list that joined between 1 st
June 2005 and 1st Nov 2012 ?
A) >=# 1/6/2005 # and <=#1/11/2012# B) ># 1/6/2005 # and < #1/11/2012 #
C) Between #1/6/2005# and <=#1/11/2012# D) a and c
77. What is the criteria using special operator to retrieve those record whose city is
Ahmedabad or patan?
A) ‘Ahmedabad patan’ B) =’Ahmedabad’, ‘patan’
C) In (‘Ahmedabad’,’patan ‘) D) None of them
78.What does NULL signifies ?
A) not empty B) empty C) both a and b D) none of them
79.What criteria should to send discount coupons only to card holders of Modern Electronic
Store residing in Ahmedabad or Patan?
A) City column = Between( Ahmedabad ‘,’patan’ ) and CardHolder column = Is Not Empty ‘
B) City column = “In(‘ Ahmedabad ‘,’patan’ ) and CardHolder column = Is Not Empty ‘
C) City column = In( Ahmedabad ,patan) and CardHolder column = ‘Is Not Empty ‘
D) City column = “ In( ‘Ahmedabad’ ,’patan’) and CardHolder column = ‘Is Not Empty
‘ 80.Which logical operator ensures that all the given conditions must be true?
A) AND B) OR C) NOT D) None of them
81. Which logical operator ensures that any one of all of given conditions must be true?
A) AND B) OR C) NOT D)None of them
82. Which logical operator ensures that given condition must not be true ?
A) AND B) OR C) NOT D)None of them
83.What is the criteria to retrieve records of customers from all other places except
Ahmedabad or Patan?

Std 11 EM Lesson:11 Retrieving Data Usnig Queries www.verymicro.co 5

 A) In(‘Ahmedabad’,’Patan’) B) Not In(Ahmedabad,Patan)
C) In(Ahmedabad,Patan) D) Not In (‘Ahmedabad’,’Patan’)
84. In Base two or more expressions are in same row means.............condition applied fields.
A) AND B) OR C) NOT D) BETWEEN

85. In Base two or move expessions are in separate rows means................condition applied
between fields.
A) AND B) OR C) NOT D) BETWEEN
86. what expression to see the list of products with their model names starting with character
set ‘hp’ ?
A) hp B) hp* C) *hp D) h*p
87.A. Wildcard represents any character or combination of characters.
A) hash B) quotes C) asterisk D) caret
88.Which operator must include with the wildcard character ?
A) Is B) Like C) Between D) And
89.In how many ways , calculation within a query can be performed ?
A) 1 B) 2 C) 3 D) 4
90. Calculation within a query in Base can be performed using.
A) Custom calculation B)Complex calculation
C) Predefined calculation D) (a) and (c)
91 includes performing numeric , date and text calculations on each record using data
form one or more fields.
A) Custom calculation B)Complex calculation
C) Predefined calculation D) (a) and (c)
92 includes operation like addition multiplication subtraction or division between
different fields.
A) Addition B) Deletion C) Calculations D) Expressions
93.To perform custom calculation we need to add an extra field known as............
A) custom field B) expression field C) new field D) added field
94.What expression should be written in calculated field to multiply ‘ Quantity’ and
‘SalePrice’?
A)Quantity * SalePrice B) Quantity x SalePrice
C) Quantity * Sale_Price D) Quantity % SalePrice
95. To perform calculation on group of records rather than on fields, Base provides..........
A) Custom calculation B) Complex calculation
C) Predefined calculation D) (a) and (c)
96. Calculated fields applied on multiple records within a table resulting in a single.........
A) count B) standard deviation C) variance D) summation
97. Calculated fields applied on multiple records within a table resulting in a single.........
A) record B) value C) text D) all of them
98..............is applied on multiple records within a table resulting in a single value.
A) Custom calculation B) Complex calculation
C) Predefined calculation D) (a) and (c)

Std 11 EM Lesson:11 Retrieving Data Usnig Queries www.verymicro.co 6

 99. The results of a calculation in a field are only for.............purpose.
A) edit B) display C) delete D) update
100. Base perform the calculation each time you........the query.
A) create B) run C) delete D) edit
101. Which of the following statement is true for Predefined Calculations ?
A) only for display purpose B) result are not stored in the
table C)calculation performed each time query run D) all of them
102. Which function help to find total number customers residing in each city ?
A) Group B) Collect C) Fusion D) Intersection
103 queries are designed to accept values from the user at run time.
A) Structure B) Parameter C) Wizard D) Table
104 query will display a dialog box asking the user to enter the values.
A) Structure B) Parameter C) Wizard D) Table
105. To create a.............., the design of the query will remain same but parameter needs to
enter rather than specifying the actual value in the criterion cell.
A) Wizard Query B) Parameter Query C) Cross-tab Query D) none of them
106. The............queries are in form or statements .
A) Design View B) Wizard view C) SQL D) none of them
107. Which option should be selected to open Execute SQL Statement dialog box ?
A) Tools -> SQL B) Tools -> SQL Statements
C) Tools -> Execute SQL D) None of them
108. Under which label , instruction has to type to perform different operations related to
table or a query ?
A) Command to execute B) Execute Command
(C)Execute SQL Command D)None of them
109. Which of the following is the correct statement to create ‘Scheme’ table with
‘SchemeID’ , ‘StartDate’ and ‘ EndDate’ fields ?
A) CREATE TABLE “Scheme”(‘SchemeID’ INTEGER NOT NULL PRIMARY KEY, ‘StartDate’
DATE, ‘EndDate DATE )
B) CREATE TABLE ‘Scheme’(“SchemeID” INTEGER NOT NULL PRIMARY KEY, ‘StartDate’
DATE, ‘EndDate DATE )
C) CREATE TABLE “Scheme”(“SchemeID” INTEGER NOT NULL PRIMARY KEY, ‘StartDate’
DATE, ‘EndDate DATE )
D) None of them
110. Which button will run the SQL command ?
A) Run B) Execute C) Implement D)None of them
111. Which of the following are written in the form of statements?
A) SQL queries B) Queries in Design View C) Queries using Wizard D) None of them
112. Which of the following can be done using SQL ?
A) Create a table B) Insert a data into table
C) Edit and Delete data D) All of them
113. What care must be taken to avoid errors in execution of SQL queries ?
A) quote signs B) capitalization C) syntax D) all of them

Std 11 EM Lesson:11 Retrieving Data Usnig Queries www.verymicro.co 7

 114. Which button gets highlighted when instructions entered?
A) Execute B) OK C) Help D) Close
115. Which of the following SQL statements helps to create table ?
A) CREATE TABLE B)ON TABLE C) NEW TABLE D) SAVE TABLE
116. Under which option ‘Refresh Tables’ option is available ?
A) View B) File C) Tables D) Edit
117. The........................statement is used to remove a table.
A) DROP TABLE B) DELETE TABLE C) REMOVE TABLE D) DROP DATABASE
118. Which is the correct statement to delete ‘Scheme ‘ Table?
A) DROP TABLE Scheme IF EXISTS; B) DELETE TABLE Scheme IF EXISTS;
B) REMOVE TABLE Scheme IF EXISTS; D) None of them
119. Which option should be clicked to create query using SQL view ?
A) Create Query in SQL view B) Create Query in Design view
C) Using SQL and Wizard D)None of them
120. The SQL statements starts with.................keyword to retrieve information and are also
known as SQL Queries.
A) SELECT B)RETRIEVE C) CREATE D) SELECTION
121. What is the data type in “ Description” Varchar (25)?
A) var B)Varchar C) Description D) 25
122. What is the size in in “ Description” Varchar (25)?
A) var B)Varchar C) Description D) 25
123. Which of the following statements retrieve FirstName and LastName from Employee
Table ?
A) SELECT FirstName, LastName from Employee:
B) SELECT FirstName, LastName from Employee;
C) SELECT FirstName, LastName from Employee
D) None of them
124. Query created using Design View can be open in SQL view by right click on the related
query and selecting....................
A) Edit in SQL View B) Show in SQL View
C) Display in SQL view D) SQL View
125. The keyword............................is used to indicate that output needs to be sorted on field.
A) ORDER BY B) SORT BY C) ARRANGE BY D)None of them
126. The keyword..............mentions that data should be sorted in ascending order of given
field.
A) ASC B) DSC C) ASCEND D) INCRE
127. Query created using..............can be seen in SQL .
A) Wizard B) Design View C) Select D) both (a) and (b)
128. In SQL, the word after the keyword..........are aliases.
A) ASC B) AS C) ALIAS D)None of them
129. Which of the following SQL statements helps to view all the fields of employee table.
A) Select *from Employee B) Select Employee from *
C) Select from Employee D) None of them

Std 11 EM Lesson:11 Retrieving Data Usnig Queries www.verymicro.co 8

 Lesson:12 – Forms and Reports
1. Which view is in form of row and column ?
A) Datasheet B) Report C) Form D) None of them
2. Base offers alternate way to view and work with the data in the table known as.......
A) Report B)Form C)Datasheet D) None of them
3. A............resembles the pen and paper style forms.
A) Table B) Query C) Form D) Report
4. In the language of database, a............is a front and for data entry and editing.
A) Table B) Query C) Form D) Report
5. Forms can be designed using various.............
A) styles, colours B)name C) to go D)All of them
6. How many ways are there to create Form?
A) one B) two C)three D) four
7. There are................ways to initiate Form Wizard.
A) one B) two C)three D) four
8. To create a Form, right click on the..........for which form is to be created.
A) Table B) Report C)label D) none of them
9. Form can be created by clicking on..............and choose ‘ Use Wizard to create a Form
option from the Tasks pane.
A) Table icon B)Form icon C)Report icon D)none of them
10.Which step consists of setting up a subform ?
A) First B)Second C) Third D) Fourth
11.Which step of Form Wizard consists of aligning various control visible on the form ?
A) Second B)Fifth C)Sixth D)Seventh
12.The labels can be aligned on the.............
A) left side B)right side C) (a) and (b) D) none of them
13.The field corresponding to a label can be arranged in............ways.
A) one B) two C)three D) four
14. The field corresponding to a label can be arranged in ...........
A) Columnar – Labels Left B)Columnar – Labels on Top
C) As Data Sheet D) All of them
15. Which step of Form Wizards allows applying different styles?
A) third B) fifth C) sixth D)seventh
16. What options are available in Form Wizard for Field border ?
A) No border B)3D look C)Flat D)All of them
17. Which of the following is the seventh step of Form Wizard ?
A) Arrange Controls B)Set data entry C)Apply style D) Set name
18.Which of the following is the eighth step of Form Wizard ?
A) Arrange Controls B)Set data entry C)Apply style D) Set name
19. Which option is available in eight step of Form Wizard ?

Std 11 EM Lesson:12 Forms and Reports 1

www.verymicro.com
 A) Work with the Form B)Modify the form C)(a) and (b) D) None of them
20. In eight step of Form Wizard after giving the name of the form and Selecting ‘modify the
form radio button ,the form will opens in...............mode
A)Create B)Edit C) Delete D) None of them
21.What can be done in eighths step of Form Wizard?
A)Set the name of the form B)How to proceed after creating the form
C) Give some styles D)(a) and (b) both
22. What should be done to select the label containing Ecode as text ?
A) Press Alt + click B)Press CTRL + Click
C)Press shift + click D) None of them
23.Which of the following will open Properties : Label Field dialog box?
A) Right click on Label and select control option
B) Right click on label and select Properties option
C) Double click on label
D) None of them
24. Which of the following is a part Properties: Label Field dialog box?
A) Height B)Width C) Text Alignment D)All of them
25.A border appears around the control with......green handles.
A) two B)four C) eight D)sixteen
26.While changing control size, the mouse cursor changes to single....................
A)arrow B)circle C)dot D)box
27. What should be done in position and size area to open the ‘Position and Size’ dialog box?
A) single click B)double click C)dragging D) none of them
28.Yellow box showing the text that mentions the purpose of the button known as.................
A) tool tip text B) help tip C) help D)none of them
29.A label..............will display tool tip.
A) Help text B) Help URL C)Tool tip text D) Text type
30. In Form control toolbar, the Design Mode On/Off icon is the...............icon from the left.
A) First B) second C) third D) fourth
31.What is the default setting of Date format property?
A)Standard (long) B) Standard (short)
C)Standard date D) none of them
32.What is the default setting of Drop down property?
A) Yes B)No C)Both (A) and (B) D) none of them
33.In which toolbar the control icon is available?
A) Formatting B)Standard C)Form Control D) none of them
34.Color table option available in...................
A) Tools -> Options -> OpenOffice.org ->Colors
B) Tools -> OpenOffice ->Colors
C) Tools -> Options -> OpenOffice.org
D) None of them
Std 11 EM Lesson:12 Forms and Reports 2
www.verymicro.com
 35. To open Page Style dialog box , which option is selected after right clicking on the blank
space in a form?
A) Page... B) Page Setup... C)Page Style... D) None of them
36.In page style dialog box , how many options are in as?
A)2 B)3 C)4 D) 5
37. In page style dialog box, which option you can see in As?
A) Color B) Graphics C)Both (A) and (B) D)None of these
38.To see one by one record in form which button is used?
A) Form button B)Record button C)Navigation button D) Navigator button
39.How many buttons are in navigation bar?
A) 4 B)5 C)6 D)7
40. By opening a form which record is displayed?
A) First B) Last C)New record D) Any one of these
41.In the form you can view............record at a time.
A) 1 B)2 C)3 D)4
42. Which dialog box open when click on find record icon?
A) Record find B)Find record C)Record Search D)Search Record
43.Which option is selected from form navigation bar to search for particular record?
A) Find Record B) Search Record C) Locate Record D) None of them
44.Clicking on which button will delete current record displayed in the form?
A) Erase B) Delete C) Remove D)None of them
45.The delete record button is available in............toolbar.
A) Form View B) Form C) Delete D) Edit
46. In Form view which record can be displayed when current record is deleted?
A) Previous B) first C) last D) next
47. The record inserted using Form view, will be stored in.............
A) Query B)Report C)Table D)Form
48 provides a way to present the information retrieved in an attractive, arranged and
decisive manner.
A) Query B)Report C)Table D)Form
49.Report can be created based on.............
A) Table B) Query C)(A) and (B) Both D)None of them
50.Report Wizard can be opened by-
A) Right click on the query or table and select Report wizard
B) Click on a report icon and choose ‘Use Wizard to Create Report’
C)(A) or (B) both
D)None of them
51. What is the first step of Report Wizard?
A) Field Selection B) Labeling Field C) Grouping D) Sort Options
52.What is the Second step of Report Wizard?
A) Appropriate labels to each row B) appropriate labels to each field
Std 11 EM Lesson:12 Forms and Reports 3
www.verymicro.com
 C) Appropriate data type to each field D) None of them
53.What is the Third step of Report Wizard?
A) Labeling Fields B) Grouping C) Sort Options D) Choose layouts
54.In which step of Report wizard sort Option is mentioned?
A) First B) Second C) Third D) Fourth
55. Up to how many levels sorting can be done in report wizard?
A) one B)two C)three D)four
56.What is the Fifth step of Report Wizard?
A) Labeling Fields B) Grouping C) Sort Options D) Choose layouts
57.In Report Wizard ,Layouts include.......
A) color combinations B)positioning of field
C)alignment of text D) all of them
58.In which step, the layout of the report is selected?
A) Second B) Third C)Fourth D)Fifth
59. In Report Wizard, step six will be asked to give the............of the report.
A) Layout B) Style C) Title D) Sorting
60.In option, the data in the output of report will remain same every time whenever
report is opened.
A) Between ‘date1’ and ‘date2’ B) Between :date1 and :date2
C) IN (‘date1,’date2’) D) none of them
61. to make a hard copy,click on................button.
A) Print Preview B) Print C) Open D) Send
62.to save report as a soft copy click on...............in Standard toolbar.
A) PDF button B) Soft button C) Save button D) soft copy button
63.what do yo mean by hard copy?
A) print the report B) preparing PDF
C) both (a) and (b) D) none of them
64. in standard toolbar, which button is used to take hard copy?
A) print button B) print preview button
C) page setup button D) none of them
65. in form control toolbar, which icon is used for Design mode on/off?

A) B) C) D)
66.in form View toolbar, which icon is used to Delete Record?
A) B) C) D)
67.which of the following is PDF button available in Standard Toolbar of Report?

A) B) C) D)
68.which of the following help to take hard copy of Report?
A) B) C) D)

Std 11 EM Lesson:12 Forms and Reports 4

www.verymicro.com
 69. In...........option, the data in the output of report will remain same every time whenever
report is opened
A) static report B) Dynamic report C) Similar report D) (a) and (b)

Std 11 EM Lesson:12 Forms and Reports 5

www.verymicro.com
 Lesson-13 Current Trends and technologies
1. The activity that we perform with use of a computer is generally termed as …………..
A) computing B) computer C) data entry D) editing
2. the usage of an electronic device capable of -
A) processing B) storing C) communicating D) all of them
3. Categories of computers include-
A) super computers,mainframe computers B) mini computers,micro computers
C) mobile computers D) all of them
4. The...........today have revolutionized the use of computers and require minimal space.
A) super computers B) mini computers C) mobile computers D) all of them
5. The major impact of mobility came with the availability of …………
A) laptop computers B) wireless communication systems
C) (a) and (b) D) none of them
6. PDA stands for-
A) personal Digital Assistant B) personal Digital Associate
C) physically Digital Assistant D) personal Direct Assistant
7. Which of the following is example of cellular data services?
A) Wi-Fi B) GSM C) CDMA D) (b) and (c)
8. Which of the following is an example of communication technologies?
A) Bluetooth B) Wi-Fi C) GPS D)all of them
9. GSM stands for-
A) Global system for Mass communication B) Global system for Mobile communication
C) General system for Mass communication D) General system for Mobile communication
10. CDMA stands for-
A) Code Division Many Access B) Code Division Many Allowance
C) Code Division Multiple Access D) Computer Division Many Access
11. What is the full form of GPRS?
A) General Packet Radio Service B) General Personal Radio Service
C) General Packet Radio System D) Global Packet Radio Service
12. Full form of 3G-
A) 3rd Generation B) 3rd Global C) 3rd Service D) none of them
13..............Computing devices are indeed one of the game changing products of recent times.
A) Smart mobile B) CDMA mobile C) PDA D) None of them
14. The typical mobile computing device has.............As primary components.
A) software B) communication C) hardware D) all of them
15. The mobile devices today come with an in-built.............And set of applications.
A) games B) operating systems C) contacts D) PDA
16. Which of the following are the OS of mobile?
A) Android B) iOS C) Symbian D) all of them
17. The in-buit applications allow downloading ………….
A) games
B) interactive programs
C) content of newspapers,books,magazines etc
D) all of them
18. The term communication refers to capabilities such as ………….
A) internet connectivity B) Phone usage
C) (a) and (b) D) none of them
19. The mobile computing trend has become a great success due to supporting technologies like …………
A) Wi-Fi B) 3G C) (a) and (b) D) none of them
20. Which technologies allow us to be connected to the rest of the world?
A) Wi-Fi B) 3G C) (a) and (b) D) none of them
21.............allow an access to uninterrupted connection to the World Wide Web.
A) 3G B) PDA C) Radio D) none of them

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

22. Mobile networks today supports-
A) short message service B) General Packet Radio Service
C) Multimedia Messaging Service D) All of them
23. What is the full form of SMS?
A) Short Message Service B) Simple Message service
C) Short Message System D) Short Meaning Service
24. What is the full form of MMS?
A) Multimedia Messaging System B) Multimedia Messaging Service
C) Many Messaging System D) Main Messaging System
25. WAP stands for
A) Wireless Application Protocol B) Wireless Application Program
C) Wireless Assistant Program D) None of them
26.............is a wireless networking protocol that allows a Wi-Fi enabled devices to communicate without use of
physical cables.
A) Broadband B) Wi-Fi C) PDA D) none of them
27. Wi-fi is an industry term used to represent wireless............protocol based on the 802.11 IEEE network
standards.
A) local area network B) local transfer C) local receiver D) none of them
28. What is the full form of LAN?
A) Local Area Network B) Local Assistant Network
C) Large Area Network D) None of them
29. 802.11a gives the lowest rate and has an outdoor range of...........meters.
A) 120 B) 250 C) 360 D) 400
30. 802.11n gives the highest data rate and has an outdoor range of...........meters.
A) 120 B) 250 C) 360 D) 400
31 technology is used to allow the mobile phone connect to the Internet
A) GPRS B) GPS C) both (a) and (b) D) none of them
32 offers a tenfold increase in data speed over the circuit switched technologies
A) GPRS B) GPS C) both (a) and (b) D) none of them
33. The terms 3G and 4G refer to third and fourth generation..........Standards.
A) mobile communication B) laptop communication
C) e-mail communication D) none of them
34. The............service was based on analog signaling and reached the data speed of 19.2 Kbps.
A) 1G B) 2G C) 3G D) 4G
35. Digital networking and the service came to be known as...........and has data speed of approximately 1.2
Mbps.
A) 1G B) 2G C) 3G D) 4G
36. The.................offers powerful multimedia services that allow organization to develop applications such as
online billing systems and video conferences.
A) 1G B) 2G C) 3G D) 4G
37. The 3G service offers faster data transfers,up to speeds as high as.............Mbps.
A) 2 B) 3 C) 4 D) 5
38. Using 3G technology it is also possible to devlop ………….
A) applications for mobile TV B) instant messaging
C) video chatting D) all of them
39. The...........sevices can offer download speed up to 100 Mbps and upload speed of 50 Mbps.
A) 1G B) 2G C) 3G D) 4G
40. A wireless technology called............came as boon for exchanging data over short distances.
A) Bluetooth B) Voice Call C) SMS D) none of them
41. It used the short wavelength radio transmissions in the............band for communication.
A) ASM B) GSM C) ISM D) GPS

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

42. ISM stands for-
A) Industrial,Scientific and Medical B) Identical,Scientific and Medical
C) Inductive,Scientific and Medical D) None of them
43. PAN stands for-
a) Personal Area Networking b) Personal Area Networks
c) Programmed Area Networks d) none of them
44. The idea of Bluetooth was initially conceived by a company named …………
a) IBM b) Sun c) Oracle d) Ericsson
45. A Bluetooth chip transmits data at a special............to a receiver Bluetooth chip.
A) order B) speed C) frequently D) none of them
46. A............is a device that lets you make telephone calls,and also provides added features like personal Digital
Assistant (PDA), send and receive E-mails,edit Office documents,use mobile Apps,play games,tune in to
radio,stream movies,edit photos,get driving directions via GPS,instant messaging,provides Wi-Fi as well as
Bluetooth support and create a playlist of digital tunes.
A) smartphone B) pager C) digital diary D) none of them
47. Which of the following service available in smartphone?
A) send and receive E-mails B) edit office document and play games
C) tune into radio, stream movies,wi-fi D) all of them
48. The smartphone has an...............mechanism
a) operating system b) touch screen c) (a) and (b) both d) none of them
49. A...............is a portable and mobile computing device.
A) pendrive B) calculater C) tablet D) none of them
50. Which of the following can perform all the operations that can be performed by a mobile phone as well as a
computer?
A) virtual keyboard B) stylus pen or digital pen
C) both (a) and (b) D) none of them
51. which of the following can perform all the operation that can be performed be a mobile phone as well as a
computer?
A) Tablet B) Mobile C) Digital diary D) none of them
52. The...........have limitations that they need to be in the range of cellular towers.
A) cellular mobile phone B) land line phone
C) (a) and (b) D) none of them
53. Which of the communication technology will be helpful in a situation like oil exploration companies working
in high sea;we don’t have a provision of erecting a cellular tower in the middle of the sea?
A) satellite communication B) cellular tower
C) wi-fi D) none of them
54. A satellite phone more commonly known as ……………
A) satphone B) satlephone C) smartphone D) intelligent phone
55. Satphone provide functionality like-
A) voice calls B) text messaging service
C) low-bandwidth internet access D) all of them
56. What is the coverage range of satphones?
A) 100 km B) 10 km C) entire earth D) 1000 km
57. From whom permission should be taken to use satellite phone?
A) Local Police Station B) Government of Gujarat
C) Government of india D) state Government
58. Which of the following is the best oldest satellite phone operator?
A) Inmarsat B) Thuraya C) both (a) and (b) D) none of them
59. Thuraya is leading............service provider.
A) satellite phone B) ISP C) BSNL D) Loop
60. Thuraya’s powerful satellite enable..............of the world’s population to communicate using satellite phones.
A) one third B) two third C) half D) one fifth

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

61............allows users to have complete access of their data or resource from any part of the world.
A) Cloud computing B) store computing
C) Multiple computing D) none of them
62. The cloud computing facility is available for -
A) personal usage B) official usage C) both (a) and (b) D) none of them
63. A typical example of personal cloud computing scenario is ………..
A) Google plus B) Google drive C) Google search D) Google Ad
64. Google provides free drive space of............shared between Google Drive and Google+.
A) 5 GB B) 1 GB C) 5 TB D) 10 GB
65. With the help of..........We can access photo
A) cloud computing B) store computing C) Multiple computingD)none of them
66. Which option is better than carrying a pen drive?
A) cloud computing B) store computing C) Multiple computingD)none of them
67. Which feature of cloud computing helps the user to keeps copies at multiple places?
A) Google synchronization B) Mail synchronization
C) Automatic synchronization D) None of them
68 feature of cloud computing in which if user download any file using web or mobile then that will
automatically download to all the devices that are linked with cloud account.
A) Google synchronization B) Mail synchronization
C) Automatic synchronization D) None of them
69 Is the personal cloud platform that allows us to keep all our digital data together.
A) Ubuntu One B) ubuntu Cloud C) Ubuntu platform D) Google One
70. Ubuntu One was launched in...............to provide sustainable revenue for Ubuntu,the free Operating System.
A) May 2009 B) May 2010 C) March 2009 D) March 2010
71. Ubuntu, the free operating on Ubuntu One, visit …………..
A) Conical B) Canonical C) james D) Microsoft
72. To create account on Ubuntu One,visit …………….
a) https://one.ubuntu.com b) https://one.ubuntu.in
c) https://one.ubuntu.org d) https://one.ubuntu.us
73. For business,the cloud computing scenario is available in different models namely-
a) software as a service b) Infrastucture as a service
c) Platform as a service d) All of them
74. Saas stands for-
a) software as a service b) Infrastucture as a service
c) Platform as a service d) All of them
75. Iaas stands for-
a) software as a service b) Infrastucture as a service
c) Platform as a service d) All of them
76. Paas stands for-
a) software as a service b) Infrastucture as a service
c) Platform as a service d) All of them
77. CRM stands for-
A) Customer Relationship Management B) Customer Regarding Management
C) Common Relationship Management D) None of them
78..............Is one of the most used cloud service for customer relationship management software
a) Salesforce.com b) Cloud.com c) CRMforce.com d) none of them
79. A business organization instead of developing its own software application generally uses the software by
making..............to the cloud service provider.
A) software B) payment C) customer D) none of them
80. In Saas, the service provider hosts the software at its.............., so that the company does not need to install
it.
A) web server B) web page C) web client D) web making
81. In Saas, the service provider will manage the..............on behalf of the company.
A) software B) payment C) hardware D) none of them

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

82. What is needed that allows them to connect to the software and use it?
a) Internet connection b) Telephone connection
c) Mobile connection d) None of them
83. In Saas, a business organization may hire the..............infrastructure as a service from the cloud service
provider instead of establishing its own physical resources.
A) software B) payment C) hardware D) none of them)
84. In Saas.the hardware at cloud is used to support different operations such as-
A) computation and storage B) printing and backup
C) networking components D) all of them
85. In Saas.the service provider owns all the equipments and is responsible for -
A) housing B) running C) maintaining D) all of them
86. Some of the IaaS providers are
A) Windows Azure Virtual Machines B) Google Compute Engine
C) Hp cloud D) all of them
87. In Paas, a business organization here is generally a.............Company that creates the software using tool
and/or libraries from the service provider.
A) software B) hardware C) both (a) and (b) D) none of them
88. In Paas, the service provider provides the.............And other services that are required for developing
software.
A) networks B) servers C) storage D) all of them
89. Which model facilitates the deployment of software applications without the cost and complexity of buying
and managing the underlying hardware and software and provisioning hosting capabilities?
A) IaaS B) SaaS C) Paas D) BaaS
90. What is/are the key characteristics of cloud computing ?
A) off site B) accessed over the internet
C) minimal IT knoeledge is required D) all of them
91. One of the major problems in ubiquitous computing domain is the identification of the objects like a-
A) specific computer B) sensor C) (a) or (b) D) none of them
92. What is the full form of RFID?
a) Radio Frequency Identification b) Radio Frequent Identification
c) Radio Frequency Identical d) None of them
93. Which of the following are techniques used for identifying objects?
a) Radiofrequency Identification and Biometrics
b) Global positioning system
c) speech Recognition
d) all of them
94. RFID Consists of.............Parts.
A) two B) three C) four D) five
95. RFID is Consists of-
A) an antenna B) a transceiver C) transponder D) all of them
96. In Radiofrequency,.............Is used to generate radio frequency signals within a relatively short range.
A) an antenna B) a transceiver C) transponder D) none of them
97. What is the range of antenna used to generate radio frequency signals within a relatively short range.
A) 10 cm to 200 m B) 1 m to 2000 m C) 100 cm to 200 cm D) 10 m to 200 m
98. In RFID, the antenna may be.............And virtually can be mounted on any surface from a computer to a wall.
A) handheld B) fixed C) (a) or (b) D) none of them
99. The............reads the radio frequency signal and transfers the information to a processing device generally a
radio frequency reader.
A) an antenna B) a transceiver C) transponder D) all of them
100............simply works as a decoder to internet the data that is stored in the transponder.
A) Radio frequency reader B) Radio frequency writer
C) Radio frequency identifier D) None of them
101. The.............Is the RFID tag that is attached to the object.
A) an antenna B) a transceiver C) transponder D) all of them

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

102. The..............is a programmed microchip and is capable of storing information of around 2000 bytes or less.
A) tag B) antenna C) transceiver D) sim
103. The tag is a programmed microchip and is capable of storing information of around …………..
A) 5 MB B) 5 KB or more C) 2,000 bytes or less D) 1 GB
104. The tags can be …………..
a) Active b) Passive c) (a) or (b) d) none of them
105. Which tags do not require battery for working ?
a) Active b) Passive c) (a) or (b) d) none of them
106. Which tags come along with their own battery ?
a) Active b) Passive c) (a) or (b) d) none of them
107. The transmission of data from RFID tag happens only when the tag passes through the field of the scanning
……………
A) an antenna B) a transceiver C) transponder D) all of them
108. The tag detects the...........from the antenna, this activates the RFID tag, and it transmits the information on
its microchip to be picked up by the scanning antenna.
A) activation signal B) red signal C) coming signal D) green signal
109. The RFID systems are used in many applications like -
A) tracking parts for just-in-time manufacturing
B) tracking purchase of customers in shopping malls
C) (a) and (b)
D) none of them
110. In which year, Beijing Summer Olympic Games RFID technology was used for high tech ticketing and
food tracking?
A) 2005 B) 2006 C) 2007 D) 2008
111 embedded tickets in Beijing games were intended to battle counterfeiting of tickets, to provide
speedy entry for visitors at venue gates and to guard against unauthorized access to specific areas of the
Olympics compound.
A) RFID B) RIFD C) RFFD D) RIID
112 tracking has been one of the earliest applications of RFID.
A) Animal B) Signal C) Mobile D) None of them
113. What attached onto a livestock in form of earring, neck belt etc or implanted inside livestock as radio signals
do not harm the body ?
A) RFID tag B) HTML tag C) RIFD tag D) None of them
114. Which technology is used to track constantly moving herds?
A) RFID B) RIFD C) RIDI D) None of them
115. The............usage helps monitoring health of the animals and to keep individual medication and vaccination
records, and prevent the spread of disease by tracking and segregating infected livestock at early stages.
A) RFID B) Biometric C) meal D) health meter
116. Which technology used in library for tracking the movement of books and theft detection?
A) RFID technology B) RIFD technology C) RIDI technology D) none of them
117. The RFID based library system, consist of smart............used instead of normal bar codes, the RFID reader
(fixed or hand held) and library management software.
A) RFID labels B) Biometrics labels C) Iris Recognition D) None of them
118. The label has a.............That stores information about the book including a unique accession number to
identify each entity.
A) small antenna B) tiny chip C) (a) and (b) D) none of them
119. The information contained on microchips in the labels can be read from any place within the library using
………….
A) RFID scanner/reader B) Biometric reader
C) Barcode reader D) none of them
120. A............can be moved rapidly across a shelf of books to read all of the unique identification information.
A) hand held reader B) flat bed reader C) scanner D) none of them

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

121. In case someone forgets to remove the RFID tag and tries to take of the things forcibly …………..
A) the alarm is raised B) police alarm is raised
C) expire D) none of them
122. The supermarkets have shopping cart has a-
A) touch screen monitor
B) client card automatic reader
C) a positioning transmitter and a product and a product reader
D) all of them
123. With the help of.........., the customer is directed to the shelves or places where the products in list can be
found.
A) cart’s navigation trolley B) cart’s navigation system
C) cart’s moving system D) cart’s locator
124. Which of the following methods are used to control the access?
A) access rights B) password protection
C) encryption D) all of them
125. For better access control a new technique known as............is now being extensively used in many
applications.
A) Biometrics B) RFID C) IRIS Recognition D) none of them
126............generally involves identification of humans based on their characteristics or behavior.
A) Biometrics B) RFID C) IRIS Recognition D) none of them
127. Human body characteristics includes -
A) fingerprints,eye retinas and irises B) voice patterns,facial patterns
C) signature and hand measurements D) all of them
128. A biometric system generally is made of..............components
A) three B) four C) five D) six
129. In Biometrics, what is used to collect the data ?
A) sensor B) data storage C) decision process D) none of them
130 performs quality control activities and develops the biometric pattern.
A) sensor B) set of signal processing algorithms
C) Data storage D) a decision process
131 Keeps information to compare the new biometrics patterns with.
A) sensor B) set of signal processing algorithms
C) Data storage D) a decision process
132. A.............Does the actual comparison.
A) sensor B) set of signal processing algorithms
C) matching algorithm D) a decision process
133...............uses the result from the matching algorithm to make decisions.
A) sensor B) set of signal processing algorithms
C) matching algorithm D) a decision process
134. A decision process may be
A) automated B) human assisted C) (a) or (b) D) none of them
135. Which techniques of biometrics used in identification and authentication of users and access control?
A) fingerprint B) iris C) voice recognition D) all of them
136..............Has been used as an alternate to sign for more than century now.
A) fingerprint B) iris C) voice recognition D) all of them
137. A person who does not know how to write puts his/her............on legal document to create its impression on
the document with the help of ink pad.
A) signature B) thumb C) money D) none of them
138. Which of the following are government applications of finger print recognition?
A) Passport Control B) AADHAR Ration Card
C) Driver’s License D) All of them

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

139. Which of the following are forensic applications of finger print recognition?
A) Criminal Investigation B) Terrorist Identification
C) Corpse Identification D) All of them
140. Which of the following are commercial applications of finger print recognition?
A) Electronic Data Security B) ATM Cards,Debit Card
C) Personal Digital Assistant D) all of them
141. Which of the following are smart cards?
A) ATM Card B) Debit Card C) (a) and (b) D) None of them
142. The...........is a muscle within the eye that regulates the size of the pupil and controls the amount of light
entering the eye.
A) retina B) iris C) (a) and (b) D) none of them
143. It is the colored portion of the eye with coloring based on the amount of...........pigment within the muscle.
A) melatonin B) red C) green D) yellow
144. The characteristics of iris............after surgeries.
A) change after 5 years B) change after 12 years
C) change after 59 years D) do not change
145. IRIS has............unique characteristics.
A) 212 B) 253 C) 266 D) 279
146. The iris recognition systems used in the market uses up to............characteristics.
A) 151 B) 173 C) 195 D) 217
147. The primary visible characteristic of the iris is the..............., tissue which gives the appearance of dividing the
iris radically.
A) trabecular meshwork B) red colour
C) green colour D) none of them
148. Iris relies heavily on..............imaging to take such a picture.
A) infrared B) bluetooth C) digital D) none of them
149. IRIS recognition application are-
A) Anti-theft device B) Biometric Key Cryptography
C) Aviation security D) All of them
150..............Recognition is a biometric technique that uses an individual’s voice as input to control the activity.
A) IRIS B) Fingerprint C) Voice or speech D) All of them
151. Voice or speech recognition relies on features influenced by -
A) biological structure of an individual’s vocal tract
B) the behavioural characteristics of the individual
C) (a) and (b)
D) none of them
152. Which technology used by banks to verify identity of the caller when making telephone tensactions and
performing account maintenance?
A) IRIS B) Fingerprint C) Voice or speech D) All of them
153. In...............science it is used to determine the truthfulness of responses a witness gives as part of an
investigation.
A) forensic B) life C) (a) and (b) D) none of them
154. In the training period the voice sample is first converted from an …………
A) Analog format to digital format B) digital format to analog format
C) analog format to analog format D) none of them
155. Application are for routing of regular callers to appropriate departments or person based on their voice
match which is used in customer service segment-
A) Call steering B) playing back simple information
C) Automated identification of caller D) Voice enabled operations
156. Application areas of voice / speech recognition used as forensics to identify the voice of a person-
A) Call steering B) playing back simple information
C) Automated identification of caller D) Voice enabled operations

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

157.............is used in customer service segment to identify the caller.
A) Call steering B) playing back simple information
C) Automated identification of caller D) Voice enabled operations
158. Full form of IVR-
a) Interactive Voice Response b) Intelligent Voice Response
c) Integrated Voice Response d) None of them
159 is an improvisation in IVR and automated cal handling systems that are often unpopular with
customers.
A) Removing Interactive Voice Response menus
B) playing back simple information
C) Automated identification of caller
D) Voice enabled operations
160 Enables the user to dial a number or perform an operation on mobile phones by issuing a voice
command.
A) Removing Interactive Voice Response menus
B) playing back simple information
C) Automated identification of caller
D) Voice enabled operations
161. Which type of applications are very useful for blind or partially blind users?
A) Removing Interactive Voice Response menus
B) playing back simple information
C) Automated identification of caller
D) Voice enabled operations
162. The...........is one of the widely used systems for navigation applications.
a) Global programming System b) Global positioning System
c) General programming System d) General programming System
163.............is a system created by the U.S. Department of Defense.
A) GPS B) Wi-Fi C) Bluetooth D) GPRS
164. Which system consists of a network of 24 satellites placed into orbit above earth?
A) GPS B) Wi-Fi C) Bluetooth D) GPRS
165. The GPS was originally intended for military applications, but in the............, the government made this
system available for civilian use.
A) 1980 B) 1983 C) 1987 D) 1991
166. The GPS technology has been found useful in many application areas such as-
A) fleet tracking B) cellular telephony
C) disaster relief and emergency services D) all of them
167. The GPS receiver take information and uses a process called...........to calculate the user’s exact location.
A) GPS Locator B) triangulation C) bi-angulation D) none of them
168. The..............compares the time a signal was transmitted by a satellite with the time it was received.
A) GPS receiver B) application C) GPRS receiver D) transceiver
169. To calculate only latitude and longitude the GPS receiver uses at least............satellites.
A) nine B) seven C) thirteen D) three
170. Which application of GPS technology is used for measuring area, preparation of digital agricultural maps and
preparation of digital land ownership maps?
A) Agriculture B) Disaster management
C) Military D) Tracking Deliveries and Shipments
171 is used in search and rescue operation, for example lost hikers and adventurers, person buried under
debris or under water can be found if they have a cell phone or GPS system that is on.
A) Agriculture B) Disaster management
C) Military D) Tracking Deliveries and Shipments
172 uses different aircrafts like fighter planes,aerial tankers,bombers etc. for accurate identification of
position of targets as well as the aircrafts.
A) Agriculture B) Disaster management
C) Military D) Tracking Deliveries and Shipments

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

173. Most courier services uses..............by GPS tracking system to monitor delivery of goods to customer
A) Agriculture B) Disaster management
C) Military D) Tracking Deliveries and Shipments
174. A company using..............technology can find out the current location of its vehicle.
A) Agriculture B) Disaster management
C) Military D) Tracking Deliveries and Shipments
175.................Is security services to determine the exact location of the stolen vehicle or a device such as mobile
phone or a laptop equipped with GPS and can find the vehicle or device very easily.
A) Agriculture B) Disaster management
C) Recovery of stolen property D) Tracking Deliveries and Shipments
176. In.........applications one machine works as a resource provider and the other works as a resource user.
A) client-server B) general C) man-made D) super
177...............is application used to provide resources to all the client machines connected to it.
A) Filer B) File server C) File client D) Folder service
178. Fiel server is a............that does login authentication of the users and based on the access control policy set
by the administrator allows restricted access to a file resource.
A) machine B) program C) data D) media
179. Full form of USB-
a) Universal Serial Bus b) United Serial Bus
c) Universal System Binary d) None of them
180. Use of USB supported............to create additional storage for our data or simply to take a backup of our data.
A) external hard drive B) external CD drive C) external DVD drive D) none of them
181. What is the full form of NAS ?
a) Network Attached System b) Network Attached Storage
c) Network Application System d) none of them
182.............have been used from decades to expand the capacity of computing in an organization.
A) computers B) Network C) super computer D) Micro computer
183. A.............Printer is a printer that is connected to a network as a device, rather that being connected to a
computer
A) network B) local C) shared D) none of them
184. Full form of SAN-
a) Storage Access Network b) Storage Area Network
c) System Access Network d) none of them
185. A...........is a dedicated network for storage.
a) Storage Access Network b) Storage Area Network
c) System Access Network d) none of them
186. Network printer has its unique.............That makes it works faster than a printer shared on a computer.
A) IP address B) PP address C) NP address D) NIC address
187.............provides access to consolidated,block level data storage.
a) SAN b) NAS c) LAN d) MAN
188. The basic idea of SAN is to allow an application server to have uniform access to different storage devices
such as-
A) hard disk arrays B) tape libraries
C) optical storage devices D) all of them
189. SAN is a type of............that is designed to handle large data transfers.
a) local area network b) wide area network c) system area network d) metropolitan area network
190.............are require to take the benefit of SAN technology.
A) High end server’s
B) multiple disk arrays
C) fiber channel interconnection mechanism of communication
D) all of them
191. Which of the following are free online storage?
A) ADrive,Microsoft Live Sky-Drive B) 4Shared, Mozy
C) Dropbox, Box D) All of them

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

192. Which of the following are paid online storage?
A) IBackup, Amazon S3 B) 4Shared, Mozy
C) Dropbox, Box D) All of them
193. In which application areas of robotics, doors and windows of a house can be opened automatically based on
certain activity or commands?
A) Intelligent Home B) Military Application
C) Farming and Animal husbundry D) Vehicle Industry
194. Electronic appliances such as............can be pre-programmed to start,stop or change its setting in between
the operation.
A) light,fans B) heaters C) air conditioners D) all of them
195.............is a key to safeguard from activities happening in and around your surroundings.
A) surveillance B) Primary C) Password D) None of them
196. An...............is a small flying machine with the shape of bird or any other objects fitted with very high
definition cameras,sensors and communication as well as networking tools.
A) airborne drone B) aircraft C) plane D) all of them
197..............has succeeded in introducing the Google driverless car.
A) Yahoo B) Google C) Maruti D) Tata
198. The U.S. state of Nevada passed a law on permitting the operation of driverless cars in Neveda and
California.
a) june 29th ,2011 b) January 29th,2011 c) july 29th,2011 d) june 29th ,2012
199. The Nevada law came into effect on ……………….
a) March 1,2012 b) May 1,2012 c) March 1,2009 d) March 1,2010
200. The Nevada Department of Motor Vehicles issued the first license for a self-driven car in …………
a) May 2013 b) May 2012 c) May 2010 d) March 2012
201. The first license dor a self driven car issued to a............prius modified with Google’s experimental driverless
technology.
A) Toyota B) Maruti C) TATA D) Nano
202. To start with the driverless project team has equipped............vehicles.
A) 5 B) 10 C) 12 D) 15
203. Researchers have developed,.............That enable nurses to lift patients without damaging their backs.
A) robotics suit B) patient suit C) (a) and (b) D) none of them
204. A robotic limb linked to tiny sensor in brain linked to tiny sensor in brain called …………..
A) BrainGate B) BrainEntry C) BrainLevel D) None of them
205.............works on thoughts of person rather than any physical action as well as a robotic arm that can perform
precision surgery.
A) BrainGate B) BrainEntry C) BrainLevel D) None of them
206. Robots can visit environments that are harmful to humans like -
A) vocanoes B) deep oceans C) moon D) all of them
207. What is the full form of ISRO?
a) Indian space Research Organization b) Indian System Research Organization
c) Intelligently space Research Organization d) None of them
208...............was one of the unmanned moon misson launched by ISRO.
A) chandrayaan-1 B) chandrayaad-A C) chandrayaad-2 D) chandrayaad-3
209. India’s moon mission called chandrayaad-1 was launched in..............and operated until August 2009.
a) October-2008 b) October-2009 c) October-2007 d) October-2006
210. Full form of QRIO-
a) Quest for curiosity b) Question for curiosityc) Query for curiosity d) none of them
211. The robot manufactured by...............called QRIO-
a) samsung b) Sony c) LG d) Nokia
212. The robot QRIO originally named.............Robot is humanoid entertainment robot that can move freely, play
with a golf ball and can respond to verbal instruction.
a) SONY Dream b) Samsung Dream c) LG Dream d) Nokia Asha

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co

213. The robot manufactured by..............called HEARBO can pick up, distinguish,and analyze multiple
simultaneous sound sources without difficulty.
a) Honda b) Sony c) Samsung d) LG
214. AI stands for -
a) Architectural Intelligence b) Artificial Intelligence
c) Artificial Inauguration d) None of them
215. The field of.............Intends to provide a computer the ability to acquire knowledge and use it in real time
scenarios.
a) Real State b) Artificial Intelligence
c) Insurance d) Cloth Merchant
216. Example of adding AI to a computer is a..............program that stores the step it has taken against a
particular move of all opponents and its outcome.
A) chess B) word C) painting D) programming
217. Photography has started in............, when William Henry Fox Talbot, combined light,paper, a few chemicals
and a wooden box to produce the first photographic print.
A) 1840 B) 1860 C) 1940 D) 1921
218..............Capture images as matrix of pixels.
a) Digital camera b) Coventional film camera
c) Matrix camera d) None of them
219. In which year Nokia came out with 41 megapixels camera?
a) 2009 b) 2010 c) 2011 d) 2012
220. Samsung has come up with an Adroid based camera called ……………
A) Moon B) GALAXY C) ASHA D) S5260
221. The television have also gone through a drastic technological change from ………….
A) CRT to LED B) LED to CRT C) LCD to CRT D) None of them
222. Full form of www-
a) World Wide Web b) Whole World Web c) World Wi-fi Web d) none of them
223. Internet-enabled TVs are capable of streaming data from
a) YouTube,Amazon Video-on-Demand b) Picasa Web Albums,Bloomberg News
c) Weather channel d) all of them
224. Internet-enabled televisions allow us access to............vast library of films and TV shows.
a) Inetflix’s b) Netflix’s c) Netmov’s d) None of them
225 is one such side affect of excessive use of technology.
a) Global warming b) Local warming c) Green computing d) None of them
226 is the term that signifies efficient use of computing resources.
a) Green computing b) Red computing c) Intelligent computing d) None of them
227. The main goal of.............Computing initiative is to minimize economic viability when using a computing
initiative.
a) red b) green c) yellow d) black
228. IENERGY STAR program launched in..............was the first step towards green computing.
a) 1995 b) 1992 c) 1989 d) 1989
229. The...........mode function of computer monitors was one of the first results of green computing initiative.
a) active b) passive c) sleep d) silent

Std 11 EM Lesson-13 Current Trends and technologies www.verymicro.co