OP3D (Pano) Hi-Res
OP3D (Pano) Hi-Res
Scan time 9s
Details on the system requirements can be found on our Internet pages or can be requested at technical service.
* Carpus imaging with optional holder
** DICOM is the registered trademark of the National Electrical Manufacturers Association for their standard
publications on the digital exchange of medical data.
Dimensions
1,100 mm ***/43.3"
1,688 –2,443 mm (min. room height 2,080 mm)
1,180 mm/46.5"
1,660 mm/65.4"
66.5 –96.2" (min. room height 81.9")
550 mm *
21.7"
951 –1,706 mm /37.4"–67.2"
450 mm/17.7"
100 mm/
3.9"
100–510 mm 995 mm
765.5 mm /30.1"
3.9–20” 39.2”
920 mm***/36.2"
238–510 mm
219 mm/8.6" 229 mm/9" 9.4–20.1"
*** Device dimensions with imaging
movements (minimum dimensions)
ORTHOPANTOMOGRAPH™, OP™, Low Dose Technology™, CLINIVIEW™ and SmartView™ are either registered
trademarks or trademarks of KaVo Kerr Group Finland in the United States and/or other countries. KaVo™
is either registered trademark or trademark of Kaltenbach & Voigt GmbH in the United States and/or other
countries. All other trademarks are property of their respective owners.
member of
Dental & Medical Equipment Manufacturer & Distributor in Indonesia Since 1983
Jl. Rawa Sumur III, Kav. III, Blok DD No. 11, Kawasan Industri Pulo Gadung, Jakarta 13930
Phone: (021) 461 0515 | Fax: (021) 460 3982 | Email: [email protected]
AndiniCare Hotline: (021) 9718 616 / 0811 900 6161 / [email protected] / www.andinisarana.com