COMPLETE REVISION

May 2016

Piping

PIP PN03SA0S02
Piping Material Specification 3SA0S02
Class 300, 304/304L Stainless Steel, Socket Weld,
0.000 C.A., Process (PTFE Packing/Gaskets)
 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has been
prepared from the technical requirements in the existing standards of major industrial users,
contractors, or standards organizations. By harmonizing these technical requirements into a single
set of Practices, administrative, application, and engineering costs to both the purchaser and the
manufacturer should be reduced. While this Practice is expected to incorporate the majority of
requirements of most users, individual applications may involve requirements that will be
appended to and take precedence over this Practice. Determinations concerning fitness for purpose
and particular matters or application of the Practice to particular project or engineering situations
should not be made solely on information contained in these materials. The use of trade names
from time to time should not be viewed as an expression of preference but rather recognized as
normal usage in the trade. Other brands having the same specifications are equally correct and may
be substituted for those named. All Practices or guidelines are intended to be consistent with
applicable laws and regulations including OSHA requirements. To the extent these Practices or
guidelines should conflict with OSHA or other applicable laws or regulations, such laws or
regulations must be followed. Consult an appropriate professional before applying or acting on any
material contained in or suggested by the Practice.

This Practice is subject to revision at any time.

© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at
Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and
Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not
permitted within any PIP Practice without the express written authorization of PIP. Authorized Users
may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of
PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the
Practice solely for Authorized Users’ purposes. These purposes include but are not limited to the
procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for
proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific
project by Authorized User’s client. PIP’s copyright notices must be clearly indicated and
unequivocally incorporated in documents where an Authorized User desires to provide any third party
with copies of the Practice.

PUBLISHING HISTORY
October 1995 Issued as PIP PN03SA0G February 2000 Revision May 2016 Complete Revision
February 1999 Revision February 2001 Technical Correction
June 1999 Revision October 2006 Complete Revision

Not printed with State funds

PIP PN03SA0S02 COMPLETE REVISION
Piping Material Specification Line Class 3SA0S02 May 2016

SERVICE: Process MATERIAL: 304/304L Dual Marked

RATING CLASS: 300, ASME B16.5-2013 DESIGN CODE: ASME B31.3-2014
TEMPERATURE LIMIT: -29°C to 200°C (-20°F to 400°F) (Note 09) STRESS RELIEF: None Required
NOMINAL CORROSION ALLOWANCE: None EXAMINATION: Per ASME B31.3

PRESSURE - TEMPERATURE RATINGS – METRIC UNITS

For NPS 1/2 through NPS 14 (Full flange ratings per ASME B16.5, Table 2-2.1.)
For NPS 16 through 24 see Note 1
TEMP ºC -29 to 38 50 100 150 200
BAR 49.6 47.8 40.9 37.0 34.5

PRESSURE - TEMPERATURE RATINGS – US CUSTOMARY UNITS

For NPS 1/2 through NPS 14 (Full flange ratings per ASME B16.5, Table II-2-2.1.)
For NPS 16 through 24 see Note 1
TEMP ºF -20 to 100 200 300 400
PSIG 720 600 540 495

ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE

PIPE 01, 23
1/2 - 1-1/2 40S SS, SMLS, ASTM A312-TP 304/304L
2 40S SS, EFW, ASTM A312-TP 304/304L (Ej=0.80)
3-4 10S SS, EFW, ASTM A312-TP 304/304L (Ej=0.80)
6 - 12 40S SS, EFW, ASTM A312-TP 304/304L (Ej=0.80)
14 - 24 Calc SS, EFW, ASTM A312-TP 304/304L (Ej=0.80)
NIPPLES 03, 23
Branch 1/2 - 1-1/2 40S SS, SMLS, ASTM A312-TP 304/304L
Swage (CONC) 1/2 - 2 40S SS, ASTM A403-WP 304/304L-S, MSS SP-95
Swage (ECC) 1/2 - 2 40S SS, ASTM A403-WP 304/304L-S, MSS SP-95
FITTINGS 02
Sockolet 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97
Thredolet 03 1/2 - 2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97
SW Latrolet 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97
THRD Latrolet 03 1/2 - 2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97
SW Elbolet 170 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L
THRD Elbolet 03, 170 1/2 - 2 Class 3000 SW SS, ASTM A182-F304/304L
90 ELL 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11
45 ELL 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11
Tee 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11
Tee (RED) 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11
Plug 03 1/2 - 2 THRD SS, ASTM A182-F304/304L, round head, ASME B16.11
Plug 53 1/2 - 2 PE SS, ASTM A182-F304/304L, round head, ASME B16.11
Coupling 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11
Coupling (RED) 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11
Coupling 03 1/2 - 2 Class 3000 THRD SS, ASTM A182-F304/304L, ASME B16.11
Coupling (RED) 03 1/2 - 2 Class 3000 THRD SS, ASTM A182-F304/304L, ASME B16.11
Cap 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11
Cap 03 1/2 - 2 Class 3000 THRD SS, ASTM A182-F304/304L, ASME B16.11
Reducing Insert 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-79
Union (GJ) 1/2 - 1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, integral seat, MSS SP-83
Reducer (CONC) 2 - 24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9
Reducer (ECC) 2 - 24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9
BW Pipet 170 2 - 12 Weld SS, ASTM A182-F304/304L, MSS SP-97
90 LR ELL 2 - 24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9
45 LR ELL 2 - 24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9
Tee 2 - 24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9
Tee (RED) 2 - 24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9
Cap 2 - 24 Weld SS, ASTM A403-WP 304/304L-S, ASME B16.9
Stub End LJ 2 - 16 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9, short pattern

Process Industry Practices Page 1 of 3

PIP PN03SA0S02 COMPLETE REVISION
Piping Material Specification Line Class 3SA0S02 May 2016

ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE

VALVES
Gate 1/2 - 2 Class 300 SW 316L SS body w/ Trim 12 GA03SU300
Gate 06 1/2 - 2 Class 300 T/SW 316L SS body w/ Trim 12 GA03SU200
Gate 1/2 - 24 Class 300 RF 316 SS body w/ Trim 12, FP GA03ST500
Gate 06 1/2 - 2 Class 800 T/SW 316L SS ext body w/ Trim 12 GA08SU202
Globe 1/2 - 2 Class 300 SW 316L SS body w/ Trim 12 GL03SU300
Globe 3 - 12 Class 300 RF 316 SS body w/ Trim 12 GL03ST501
Lift Check 61 1/2 - 2 Class 300 SW 316L SS body w/ Trim 10, piston CL03SU300
Swing Check 62 3 - 24 Class 300 RF 316 SS body w/ Trim 10 CS03ST500
Wafer Dual PLT 07, 26, 63 3 - 24 Class 300 RF 316 SS body w/ Trim 10 CD03ST700
Check
Lug Dual PLT Check 26, 63 3 - 10 Class 300 RF 316 SS body w/ Trim 10 CD03ST702
Dual PLT Check 26, 63 12 - 24 Class 300 RF 316 SS body w/ Trim 10 CD03ST510
Ball 09 1/2 - 2 Class 300 SW 316L SS body w/ 316 SS trim, R-PTFE ST BA03SU301
Ball 09 3-4 Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST BA03ST522
Ball 08 6 - 10 Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST BA03ST524
Ball 08, 09 3-4 Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, FP BA03ST521
Ball 08, 09 6-8 Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO, FP BA03ST523
Ball 09 12 - 24 Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO BA03ST519
Ball 08, 09 10 - 24 Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO, FP BA03ST520
Ball 06, 09 1/2 - 2 Class 300 T/SW 316L SS body w/ 316 SS trim, R-PTFE ST BA03SU201
Wafer Butterfly 07, 09 2-3 Class 300 RF 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST BF03ST705
Wafer Butterfly 07, 09 4 - 24 Class 300 RF 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST, GO BF03ST706
09, 26,
Lug Butterfly 2-3 Class 300 RF 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST BF03ST707
178
09, 26,
Lug Butterfly 4 - 24 Class 300 RF 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST, GO BF03ST708
178

FLANGES 02
Socket Weld 1/2 - 1-1/2 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.5
Blind 1/2 - 24 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.5
Lap Joint 2 - 16 Class 300 CS, ASTM A105, ASME B16.5
Pair WN Orifice 2 - 24 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.36, SW taps
GASKETS
1/2 - 24 Class 300 Spiral wound type 304 SS winding, w/ PTFE filler, w/ 304 SS inner ring
and CS outer ring, ASME B16.20
BOLTING
Stud Bolts ASTM A193, Gr B7 stud, w/ 2 heavy hex nuts, ASTM A194, Gr 2H
Cap Screw 178 ASTM A193, Gr. B7 heavy hex

Process Industry Practices Page 2 of 3

PIP PN03SA0S02 COMPLETE REVISION
Piping Material Specification Line Class 3SA0S02 May 2016

90° BRANCH CONNECTION

Legend and Chart

24 T
20 E T
18 E R T
16 E E E T
14 E E E E T
12 W E E E E T
10 W W E E E E T
BRANCH SIZE

8 W W W E E E E T
6 W W W W E E E E T
4 W W W W W W E E E T
3 W W W W W W W W E E T
2 W W W W W W W W W E E T
1½ S S S S S S S S S S S S T
1 S S S S S S S S S S S S E T
3/4 S S S S S S S S S S S S E E T
1/2 S S S S S S S S S S S S E E E T
24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 3/4 1/2
HEADER SIZE

E Reducing Tee
S Sockolet
T Tee
W BW Pipet

NOTES:
01 If a pipe schedule is shown under "SCH/RAT," it shall be adequate for the full flange rating. If "CALC" is shown, the pressure limit may be lower than full flange
rating.
02 All butt-welded component thicknesses shall match the pipe thickness.
03 Threaded joints are permitted only at the outlet of vent and drain valves, hydrostatic connections, outlet instrument take-off valves, and to match equipment.
06 These valves shall be used only for vent, drain, and instrument connections.
07 These valves have no flanges but are installed between line flanges with extra-length bolts.
08 Full-port valves shall be used if indicated on the P&ID.
09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature restrictions
shall be consulted.
23 Sch 80S pipe and pipe nipples shall be used for threaded connections for sizes NPS 1/2 through NPS 2.
26 To be used only if indicated on the P&ID.
53 To be used where required for pipe supports, dummy legs and unused socketweld taps.
61 These check valves shall be installed in a horizontal position with cover up.
62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow.
63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow.
170 These items should be qualified for use in this specification in accordance with ASME B31.3, Paragraph 304.7.2.
178 Use cap screws for valves or flanges containing threaded holes. It is recommended that cap screws be supplied by valve supplier/manufacturer to ensure proper
length for all threaded holes.

REFERENCES:
Process Industry Practices (PIP)
PIP PNF0200 - Vents, Drains, and Instrument Connection Details
PIP PNSMV023 - Stainless Steel Gate Valve Descriptions
PIP PNSMV024 - Stainless Steel Globe Valve Descriptions
PIP PNSMV025 - Stainless Steel Check Valve Descriptions
PIP PNSMV026 - Stainless Steel Ball Valve Descriptions
PIP PNSMV027 - Stainless Steel Butterfly Valve Descriptions

Process Industry Practices Page 3 of 3