11819

22310
3 Hours / 70 Marks Seat No.

Instructions : (1) All Questions are compulsory.

(2) Answer each next main Question on a new page.
(3) Illustrate your answers with neat sketches wherever necessary.
(4) Figures to the right indicate full marks.
(5) Assume suitable data, if necessary.
(6) Use of Non-programmable Electronic Pocket Calculator is permissible.

SECTION - A

Marks
1. Attempt any SIX of the following : 12
(a) Define permeability.
(b) Define MMF.
(c) Define form factor of an alternating quantity.
(d) Define frequency and time period of an alternating quality.
(e) Define transformation ratio of transformer.
(f) State the EMF equation of a 1 transformer and state the meaning of each
term used.
(g) Give two applications of single phase motors.

2. Attempt any THREE of the following : 12

(a) Draw and explain B – H curve.
(b) Draw a balanced 3-phase star connected load. Show various line and phase
values and also state the relationship between them.
(c) Explain the working principle of 1 transformer.
(d) Explain the working principle of 1motor with a neat diagram.

[1 of 2] P.T.O.
22310 [2 of 2]
3. Attempt any TWO of the following : 12
(a) State and explain Faraday’s laws of electromagnetic Induction.
(b) An inductance of 0.1H and a resistance of 50 are connected in series across
a 220 V, 50 Hz AC supply.
Determine : (i) Impedance (ii) Current (iii) Power factor (iv) Power
Consumed
(c) Derive the EMF equation of a 1 transformer.

SECTION - B
4. Attempt any FIVE of the following : 10
(a) Define Active component. Give two examples.
(b) Draw the symbol of PN-junction diode and give two applications.
(c) Draw the symbols of PNP and NPN transistor.
(d) Define PIV.
(e) Draw the symbol of ideal voltage source and ideal current source.
(f) Define  and  of a transistor.

5. Attempt any THREE of the following : 12

(a) Define amplitude and phase of a sinusoidal quantity.
(b) Explain the constructional details of LED.
(c) Explain zener diode as a voltage regulator.
(d) Find the value of resistor from the given colour code :
(i) Red Red Red Gold
(ii) Blue Orange Green Silver
(e) Explain with neat diagram how transistor can be used as a switch.

6. Attempt any TWO of the following : 12

(a) Differentiate between analog and digital ICs.
(b) Explain the working of half wave rectifier with suitable diagram.
(c) Draw the diagram of transistor operating regions.
_______________
 22310
11920
3 Hours / 70 Marks Seat No.

Instructions – (1) All Questions are Compulsory.

(2) Answer each next main Question on a new page.
(3) Illustrate your answers with neat sketches wherever
necessary.
(4) Figures to the right indicate full marks.
(5) Mobile Phone, Pager and any other Electronic
Communication devices are not permissible in
Examination Hall.

Marks
SECTION - I

1. Attempt any SIX of the following: 12

a) Define self induced Emf. Write equation of self induced Emf.
b) State Lenz’s Law.
c) Draw sinusoidal waveform showing various quantities
associated with it.
d) Define RMS value and Average value of AC waveform.
e) State applications of single phase AC motors.
f) Write the Emf equation of transformer. State the meaning
of each term in it.
g) Define -
(i) Current
(ii) Potential difference
h) State Faradays laws of electromagnetic inductions.

P.T.O.
22310 [2]
Marks
2. Attempt any THREE of the following: 12
a) Draw and explain B-H curve.
b) Obtain the delta connected equivalent for the star connected
circuit (Fig. No. 1)

Fig. No. 1

c) Draw and describe power triangle. State its significance.

d) Compare magnetic and electric circuits (four points)
e) Describe the construction and working principle of auto
transformer.

3. Attempt any TWO of the following: 12

a) Describe the operation of inductor with a sinusoidal AC
voltage as input. Draw waveform for voltage across and
current through the inductor. Draw its phasor representation.
b) Describe the construction and working principle of single
phase AC motor.
c) State the different types of transformers. Describe the
construction and general principle of transformer.
22310 [3]
Marks
SECTION - II

4. Attempt any FIVE of the following: 10

a) Define active component. Give two examples.
b) State any four specifications of resistor.
c) Draw symbol of -
(i) PN junction diode
(ii) Zener diode
d) State the need for filler circuits in power supply.
e) Define a. Give the relationship between a and β.
f) Define the following with respect to BJT.
(i) Input resistance
(ii) Output resistance
g) Compare between active and passive components.

5. Attempt any THREE of the following: 12

a) Describe the operation of transistor as a switch with suitable
diagram.
b) Draw and explain the operation of zener as a voltage
regulator.
c) Define filter. State its types. Draw any one filter with input
and output waveform.
d) (i) Draw the time domain and frequency domain representation
of sine wave and triangular wave.
(ii) Define frequency and wavelength
e) (i) Discuss ideal and practical voltage source.
(ii) Compare CB, CC and CE configuration (two points)

P.T.O.
22310 [4]
Marks
6. Attempt any TWO of the following: 12
a) (i) Compare between analog and digital IC.
(ii) Find the value of resistor from the given color code.
(1) Brown, Black, Red, Silver
(2) Orange, Red, Brown, Gold
b) Draw circuit diagram and describe the working principle of
full wave bridge rectifier. Draw it’s waveforms.
c) Draw construction of BJT (NPN) and explain its working
principle. State and explain the different operating regions.
 22310
21222
3 Hours / 70 Marks Seat No.
15 minutes extra for each hour

Instructions – (1) All Questions are Compulsory.

(2) Answer each next main Question on a new page.
(3) Illustrate your answers with neat sketches wherever
necessary.
(4) Figures to the right indicate full marks.
(5) Assume suitable data, if necessary.
(6) Mobile Phone, Pager and any other Electronic
Communication devices are not permissible in
Examination Hall.
Marks

SECTION - I

1. Attempt any SIX of the following. 12

a) Define :
(i) Electric circuit
(ii) Magnetic circuit
b) State the meaning of “Magnetic Hysteresis”.
c) Define :
(i) Peak factor
(ii) Form factor
d) In a simple AC series circuit, voltage is leading current by 30°.
State the nature of circuit and compute circuit power factor.
e) Define : Transformer.
f) State the principle of electromagnetic induction.
g) State four types of single-phase induction motor.

P.T.O.
22310 [2]
Marks
2. Attempt any THREE of the following. 12
a) Draw a neat phasor diagram and derive relationship between
line voltage and phase voltage in balanced star connection.
b) An alternating voltage is given by,
= 200 sin(314.2t) volt
Determine :
(i) Peak voltage
(ii) Frequency
(iii) Time period
(iv) Voltage magnitude at t = 15 msec.
c) Describe with neat sketch, the working principle of an
autotransformer
d) With neat sketch, explain difference between Core-type transformer
and Shell-type transformer.

3. Attempt any TWO of the following. 12

a) Explain the phenomenon of
(i) Statically induced emf
(ii) Dynamically induced emf
State the laws used to identify the direction or polarity of above
types of emfs.
b) i) A coil having resistance of 50 Ω and an inductance of
0.2 H is connected to 1-phase, 230 V, 50 Hz AC supply.
Determine 4
(1) Inductive reactance
(2) Impedance
(3) Coil current
(4) Power consumed by the coil
ii) What is Universal motor ? 2
c) With neat sketch, describe the construction and working
principle of single-phase induction motor. Give its two
applications.
22310 [3]
Marks
SECTION - II

4. Attempt any FIVE of the following. 10

a) Define :
(i) Active component
(ii) Passive component
b) State any two parameters of a signal and also state their meaning.
c) State significance of filter in electronic circuits.
d) Draw symbol of zener diode and state its unique feature which
differs it from ordinary diode.
e) Draw construction and symbol of PNP-type transistor.
f) Draw circuit diagram of CB configuration.

5. Attempt any THREE of the following. 12

a) Distinguish clearly between Ideal and Practical voltage source with
the help of their characteristic curves.
b) Distinguish clearly between Analog IC and Digital IC.
c) With the help of characteristic diagram, explain various operating
regions of transistor.
d) Define current gains Alpha (a) and Beta (b) of transistor
configurations and derive relation between them.

6. Attempt any TWO of the following. 12

a) With neat constructional sketch, explain the working of Light
Emitting Diode (LED)
b) With the help of neat circuit diagram, explain working of bridge
type rectifier. Draw input-output voltage waveforms.
c) (i) Explain how to obtain value of given resistor using
colour code. 3
(ii) Explain how to obtain value of given capacitor using
colour code 3