User ManualSMAS HIFU

Congratulations
First we would like to thank you for purchasing SMAS HIFU and for the
trust you have placed in us. By means of this handy User Manual and following its
simple instructions you will achieve results comparable to those obtained from the
hands of a professional beautician.We strongly recommend that you read this User
Manual thoroughly. Reading and understanding it will help you use SMAS HIFU
System effectively and safely.
 Content

chapter 1
• SMAS principle
• HIFU technology
• Applications
• Eight Advantages Of SMAS HIFU

chapter 2
• Parts introduce and installation
• Operation Screen
• Operation Method

chapter 3
• FAQ

chapter 4
• Warranty
• Technical specifications
Chapter 1

1. What’s SMAS?
Superficial Muscular Aponeurotic System ,called SMAS.Refers to a layer of
connective tissue membrane,connecting fat and facial superficial muscles and
extending to facial skeleton. It is widely covering in the deep tissue below the dermis
2. What’s HIFU?

High intensity focused ultrasound

Using a focused transducer site selectivity in the specified concentration of the energy
conveyed by the temperature change in the size of the solidification, shrinkage,
produce collagen, elastin device.Simply speaking, like use lens to burning up the
paper. HI- FU is used in the treatment of deep body of cancer cells, the same principle
in the dermis and the SMAS layer using a focused transducer upgrade remove
wrinkles and tighten.

Operation Principle
SMAS HI-FU with its unique high-energy focusing ultrasonic reach SMAS layer
directly,enhance the SMAS Fascia suspension, comprehensively solve facial
droop and loose problem ,meanwhile activate the restructuring and regeneration of
collagen. Also can improve large pores, wrinkles, elastic tissue changes and facial
aging problem ,etc. Each course of treatment takes only 30 minutes. After treatment,
you can normal makeup, can work completely, does not affect your normal life.
According to the clinical research indicated that, SMAS lift ultrasonic knife
Rhytidectomy more lasting than the old technique effect, common to keep the
2-3 years, or even longer time.

Hi-FU (high intensity focused ultrasound) energy injected into the skin, the dermis
(3mm) and the SMAS layer (4.5mm) to form a thermal coagulation zone, promote
collagen production and skin lifting instruments
Handpiece
D4: D4, 4MHZfrequency used to transmit high- energy focused ultrasound to the skin,
subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm,
direct subcutaneous SMAS layer, forming “heat coagulation” regional, targeted to
thicker skin, such as cheeks, etc.

D7:D7, 7MHZfrequencies used to transmit high-energy focused ultrasound to the skin,

subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct
subcutaneous SMAS layer, targeted to thinner skin, such as the forehead, thin and
neck.

M7: M7 ,for transmitting high frequency of 7 MHZ focused ultrasound energy into
the dermis layer of the skin tissue,the ultrasound to penetrate the skin to a depth of
3.0mm,is responsible for activating the skin’s dermal layer of collagen,effectively
enhance the effect of the consolidation of the outline,but also improve large pores and
reduce the appearance of wrinkles.

Application:
1.Remove wrinkles on around forehead, eyes, mouth, etc.
2.Lifting and tightening both cheeks skin.
3.Improving skin elasticity and shaping contour.
4.Improving jaw line, reducing “marionette lines”
5.Tightening the skin tissue on forehead, lifting the eyebrows lines.
6.Improving skin complexion, making the skin delicate and bright
7. Match with injecting beauty like Hyaluronic acid, collagen, to resolve more aging
problem
8. Removing neck wrinkles, protecting neck aging.

Eight Advantages Of SMAS HIFU

1.The HIFU technique,Reach the SMAS layer.
2.Ultrasonic skin sketch
3. Non invasive treatment
4. The HIFU technique,Treatment of the Slack jaw and neck.
5.The three-dimensional sculpture
6. No operation, lasting effect
7. Comparable to traditional operation，Repeated treatment
8.No recovery, natural and flawless .

No surgery, No bleeding, No scars, No trauma, No radiation, No

side effects
 HIFU vs RF
HI-FU RF
Principle Ultrasonic Radio frequency
Depth SMAS Layer Dermis
Energy Transfer Convey energy through
Energy reach destination the epidermis

directly, no energy loss Energy gradually

reduce

Function Lifting,wrinkle removal, wrinkle removal, increase

increase skin elasticity skin elasticity
Pain Mild pain Severe pain
Treatment Frequency 1 2-5
Last Time 1.5-2 year 0.5-1 year

HIFU Laser, IPL&RF

Treatment From inside to outside From outside to inside
Chapter 2

Parts Introduction

D7

M7

D4
Installation steps
( Attention: When installed, the socket should align, after press tight, a fixed
card position should be rotated 90 degrees and fixed (as red circle show)

Operation Screen

1.Treatment Area
2. Select Probe

3. Treatment Interface

Attention
Power:Ultrasonic energy intensity, starting from a low-profile (0.05J start), according
customer’s endurance to adjust

Spacing--Standard is 1.7mm, according customer’s endurance to adjust. The range

between 2mm ~ 1mm, the less data, the greater the density
Length--According guests treatment site to adjust, such as adjust short length in
forehead, bags and other uneven and narrow places. In the treatment of head wave
plate side of the handle close to the standard, i.e. zero begins. The longest length is
25mm.
(Treatment interface requires must adjust three data “POWER”“SPACING”
“LENGTH” first, then press the start button “STAND BY”to start.)

Operation Method
1. The probe can use physiological salt to clean, select 4MHz or 7MHz probe
( Suggestion: operate 4MHz probe first, then operating 7MHz probe)

2. After clean face, coated corresponding products (such as gel, water gel products),
coated with about two millimeters, the product can also be applied to the ultrasonic
probe sheet, smooth the indentation, can be affixed to tight skin.

3. Switched on the instrument ,select the treatment site,enter treatment interface to

adjust the strength and density spacing, length, etc., (according to the guest's skin
condition and endurance to adjust)

4. On treatment, snapping the probe to the skin, with a positioning method of

operation. after starting interface, click the button on the handle parts will begin
output, while working, the indicator will turn from red to green, it will automatically
stop, must wait until after a stop (after the light turns red) before the probe away from
the skin, then do the next place. When operating the face ,direction could from the
bottom up, a place operation once is enough, not more than twice. (Note that
operation of the eye and forehead or narrow places must snapping, the energy may be
slightly lower, the length of treatment may be appropriate to adjust the length of the
interface so that the operator (the operation of a face approximately 20 minutes).
5.finished the operation, turn off the instrument, clen the probe , guests can not use
hot water to wash face, you can apply moisturizing mask.
Chapter 3

FAQ
Q1, What’s principle?
A1. Use high intensity focused ultrasound on the skin deep layer , promote
regeneration and remodeling of collagen, so that you get the face lifting and
tightening.

Q2.Is it same as operation treatment?

A2.No,it is a non traumatic treatment, applied directly to the skin
deep position, treatment does not involve any cutting, and without damage to the
surface of the skin.

Q3. What’s difference between Hifu and Laser?

A3. Usually,laser is used to surface layer of skin while Hifu is directly applied to
fascia layer . Both are complementary,also has the treatment of some combination of
the two.

Q4. Is it Safety?
A4. There are more than 65,000 successful cases around the world.( Ultrasonic
treatment has been applied to medical treatment in the early 50 years.

Q5. How long for the period of treatment?

A5. According to the area, usually the whole face take about 30-60 minutes.

Q6. Treatment position and treatment function?

A6. Have a good effect on facial treatment and neck relaxation.Also make your skin
more tighten, showing a more fresh and new skin.

Q7. How long will see the result?

A7. Remarkable effect will see in 6-12 months after treatment. Because the rebuilding
and regeneration collagen begin to continue after treatment. Even some customer’s
collagen still in the rebuilding process after one year.However, the result is depend on
customer.

Q8. Does it need to have a rest after treatment?

A8. It is a noninvasive, non operation treatment. No need to rest after the
treatment, can immediately put into normal life.

Q9.What is the feeling when you are making the treatment?

A9.In fact that you can’t feel anything, because focused ultrasound is applied to
the skin deep layer when in the treatment process.

Q10. Are there any side effects?

A10.Without any side effects, some clients will have a little prick in the
treatment or after treatment, the skin will appear slight redness, but this is a normal
phenomenon ,does not have to worry about.

Chapter 4

We suggest that you read through this document carefully in order to fully
understand the cover that the manufacturer offers with this guarantee as well as
your responsibilities as owner.

1. GUARANTEE PERIOD
The product covered by this guarantee certificate is protected for a period of TWO (2)
YEARS as from the date of receiving the product, which will be taken as the date that
appears on the sales receipt for the product or on the corresponding delivery docket
should this be later.

2. THE GUARANTEE DOES NOT COVER

- Defects attributable to use other than that established in the User Manual.
- Poor installation, poor assembly or breakage of components due to improper
installation, (the User Manual gives detailed instructions on how to install and use the
machine).
- Improper use of the product (use without applying gel, exceeding operating times,
exposure to high moisture levels, etc.) or problems arising from poor maintenance
(accumulation of dirt on any part of the product or its accessories, etc.) (check the
User Manual for detailed instructions on how to install and use the product).
- Repairs carried out by persons not authorised or appliances that have been opened or
tampered with by persons not authorised by the manufacturer.
- Deviations from the standard product, such as light vibration, noise or breakage of
components that do not affect the performance of the machine and which cannot be
attributed to manufacturing faults.
- Scratches, scrapes, abrasions, knocks, falls, etc. caused by carelessness.
- Defects on the appliance caused by damage during transit.
Forbidden group
1.People with heart disease or high blood pressure, or configured cardiac pacemaker.
2.Patients with acute inflammation, asthma, deep vein thrombosis, thyroncus, cancer.
3.People with hemorrhagic disease, trauma or who is bleeding.
4. Pregnant women
5. Medical Plastic parts, or parts with artificial in filling inside.
6.People with metal inside the body(include metallic tooth)
7.Patient with skin inflammation or with edema.
8.People with an abnormal immune system.
9.Numb or insensitive to heat.

Attention
1. Do not put the probe in the hands wrapped around the cable when beautician
operation.
2. According guest’s endurance to adjust intensity from low.
3. When operating, the guests will feel slightly pain,it is a normal reaction. but the
probe must be close to the skin. Without snapping, guests will have a strong tingling,
severe damage to the skin.
4. When the handle work lights still bright, the probe can not leave guests face.
5.When installed, the socket should align, after press tight, a fixed card position
should be rotated 90 degrees and fixed.
6. In addition, not exposure, IPL or laser treatment, could operate after about one
month.
7. After care, do not use hot water to wash face, no baked sauna and no facial massage
within 2 weeks.
Technological Specification
Energy Type HIFU
Fluency 0.2-2J/cm2(0.05 Step)
Monitor LCD screen
Cartridge D4 4.0MHz 4.5mm
D7 7.0MHz 4.5mm
M7 7.0MHz 3.0mm
Spacing 0.5-10mm
Length 5.0-25mm(1.0 Step)
Electrical Requirements AC 100-240V 50/60Hz
Dimensions( W*D*H) 400*455*460 (W*D*H)
(Cart excluded)
Weight 15 (Cart excluded)